From: Ruiyu Ni <ruiyu.ni@intel.com>
To: edk2-devel@lists.01.org
Cc: Jiewen Yao <jiewen.yao@intel.com>
Subject: [PATCH v2 5/5] MdePkg: Add BluetoothAttribute.h and BluetoothLeConfig.h
Date: Tue, 6 Jun 2017 11:35:43 +0800 [thread overview]
Message-ID: <20170606033543.254936-6-ruiyu.ni@intel.com> (raw)
In-Reply-To: <20170606033543.254936-1-ruiyu.ni@intel.com>
UEFI Spec 2.7 introduces BluetoothAttribute and BluetoothLeConfig
protocols. The patch adds the definitions for them.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
---
MdePkg/Include/Protocol/BluetoothAttribute.h | 283 ++++++++++++
MdePkg/Include/Protocol/BluetoothLeConfig.h | 634 +++++++++++++++++++++++++++
MdePkg/MdePkg.dec | 10 +
3 files changed, 927 insertions(+)
create mode 100644 MdePkg/Include/Protocol/BluetoothAttribute.h
create mode 100644 MdePkg/Include/Protocol/BluetoothLeConfig.h
diff --git a/MdePkg/Include/Protocol/BluetoothAttribute.h b/MdePkg/Include/Protocol/BluetoothAttribute.h
new file mode 100644
index 0000000000..f168422cf0
--- /dev/null
+++ b/MdePkg/Include/Protocol/BluetoothAttribute.h
@@ -0,0 +1,283 @@
+/** @file
+ EFI Bluetooth Attribute Protocol as defined in UEFI 2.7.
+ This protocol provides service for Bluetooth ATT (Attribute Protocol) and GATT (Generic
+ Attribute Profile) based protocol interfaces.
+
+ Copyright (c) 2017, Intel Corporation. All rights reserved.<BR>
+ This program and the accompanying materials are licensed and made available under
+ the terms and conditions of the BSD License that accompanies this distribution.
+ The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php.
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+ @par Revision Reference:
+ This Protocol is introduced in UEFI Specification 2.7
+
+**/
+
+#ifndef __EFI_BLUETOOTH_ATTRIBUTE_H__
+#define __EFI_BLUETOOTH_ATTRIBUTE_H__
+
+#define EFI_BLUETOOTH_ATTRIBUTE_SERVICE_BINDING_PROTOCOL_GUID \
+ { \
+ 0x5639867a, 0x8c8e, 0x408d, { 0xac, 0x2f, 0x4b, 0x61, 0xbd, 0xc0, 0xbb, 0xbb } \
+ }
+
+#define EFI_BLUETOOTH_ATTRIBUTE_PROTOCOL_GUID \
+ { \
+ 0x898890e9, 0x84b2, 0x4f3a, { 0x8c, 0x58, 0xd8, 0x57, 0x78, 0x13, 0xe0, 0xac } \
+ }
+
+typedef struct _EFI_BLUETOOTH_ATTRIBUTE_PROTOCOL EFI_BLUETOOTH_ATTRIBUTE_PROTOCOL;
+
+#pragma pack(1)
+
+//
+// Bluetooth UUID
+//
+typedef struct {
+ UINT8 Length;
+ union {
+ UINT16 Uuid16;
+ UINT32 Uuid32;
+ UINT8 Uuid128[16];
+ } Data;
+} EFI_BLUETOOTH_UUID;
+
+
+#define UUID_16BIT_TYPE_LEN 2
+#define UUID_32BIT_TYPE_LEN 4
+#define UUID_128BIT_TYPE_LEN 16
+
+#define BLUETOOTH_IS_ATTRIBUTE_OF_TYPE(a,t) ((a)->Type.Length == UUID_16BIT_TYPE_LEN && (a)->Type.Data.Uuid16 == (t))
+
+//
+// Bluetooth Attribute Permission
+//
+typedef union {
+ struct {
+ UINT16 Readable : 1;
+ UINT16 ReadEncryption : 1;
+ UINT16 ReadAuthentication : 1;
+ UINT16 ReadAuthorization : 1;
+ UINT16 ReadKeySize : 5;
+ UINT16 Reserved1 : 7;
+ UINT16 Writeable : 1;
+ UINT16 WriteEncryption : 1;
+ UINT16 WriteAuthentication : 1;
+ UINT16 WriteAuthorization : 1;
+ UINT16 WriteKeySize : 5;
+ UINT16 Reserved2 : 7;
+ } Permission;
+ UINT32 Data32;
+} EFI_BLUETOOTH_ATTRIBUTE_PERMISSION;
+
+typedef struct {
+ EFI_BLUETOOTH_UUID Type;
+ UINT16 Length;
+ UINT16 AttributeHandle;
+ EFI_BLUETOOTH_ATTRIBUTE_PERMISSION AttributePermission;
+} EFI_BLUETOOTH_ATTRIBUTE_HEADER;
+
+typedef struct {
+ EFI_BLUETOOTH_ATTRIBUTE_HEADER Header;
+ UINT16 EndGroupHandle;
+ EFI_BLUETOOTH_UUID ServiceUuid;
+} EFI_BLUETOOTH_GATT_PRIMARY_SERVICE_INFO;
+
+typedef struct {
+ EFI_BLUETOOTH_ATTRIBUTE_HEADER Header;
+ UINT16 StartGroupHandle;
+ UINT16 EndGroupHandle;
+ EFI_BLUETOOTH_UUID ServiceUuid;
+} EFI_BLUETOOTH_GATT_INCLUDE_SERVICE_INFO;
+
+typedef struct {
+ EFI_BLUETOOTH_ATTRIBUTE_HEADER Header;
+ UINT8 CharacteristicProperties;
+ UINT16 CharacteristicValueHandle;
+ EFI_BLUETOOTH_UUID CharacteristicUuid;
+} EFI_BLUETOOTH_GATT_CHARACTERISTIC_INFO;
+
+typedef struct {
+ EFI_BLUETOOTH_ATTRIBUTE_HEADER Header;
+ EFI_BLUETOOTH_UUID CharacteristicDescriptorUuid;
+} EFI_BLUETOOTH_GATT_CHARACTERISTIC_DESCRIPTOR_INFO;
+
+#pragma pack()
+
+typedef struct {
+ UINT16 AttributeHandle;
+} EFI_BLUETOOTH_ATTRIBUTE_CALLBACK_PARAMETER_NOTIFICATION;
+
+typedef struct {
+ UINT16 AttributeHandle;
+} EFI_BLUETOOTH_ATTRIBUTE_CALLBACK_PARAMETER_INDICATION;
+
+typedef struct {
+ UINT32 Version;
+ UINT8 AttributeOpCode;
+ union {
+ EFI_BLUETOOTH_ATTRIBUTE_CALLBACK_PARAMETER_NOTIFICATION Notification;
+ EFI_BLUETOOTH_ATTRIBUTE_CALLBACK_PARAMETER_INDICATION Indication;
+ } Parameter;
+} EFI_BLUETOOTH_ATTRIBUTE_CALLBACK_PARAMETER;
+
+typedef struct {
+ UINT32 Version;
+ BLUETOOTH_LE_ADDRESS BD_ADDR;
+ BLUETOOTH_LE_ADDRESS DirectAddress;
+ UINT8 RSSI;
+ UINTN AdvertisementDataSize;
+ VOID *AdvertisementData;
+} EFI_BLUETOOTH_LE_DEVICE_INFO;
+
+/**
+ The callback function to send request.
+
+ @param[in] This Pointer to the EFI_BLUETOOTH_ATTRIBUTE_PROTOCOL instance.
+ @param[in] Data Data received. The first byte is the attribute opcode, followed by opcode specific
+ fields. See Bluetooth specification, Vol 3, Part F, Attribute Protocol. It might be a
+ normal RESPONSE message, or ERROR RESPONSE messag
+ @param[in] DataLength The length of Data in bytes.
+ @param[in] Context The context passed from the callback registration request.
+
+ @retval EFI_SUCCESS The callback function complete successfully.
+
+**/
+typedef
+EFI_STATUS
+(EFIAPI *EFI_BLUETOOTH_ATTRIBUTE_CALLBACK_FUNCTION) (
+ IN EFI_BLUETOOTH_ATTRIBUTE_PROTOCOL *This,
+ IN VOID *Data,
+ IN UINTN DataLength,
+ IN VOID *Context
+ );
+
+/**
+ Send a "REQUEST" or "COMMAND" message to remote server and receive a "RESPONSE" message
+ for "REQUEST" from remote server according to Bluetooth attribute protocol data unit(PDU).
+
+ @param[in] This Pointer to the EFI_BLUETOOTH_ATTRIBUTE_PROTOCOL instance.
+ @param[in] Data Data of a REQUEST or COMMAND message. The first byte is the attribute PDU
+ related opcode, followed by opcode specific fields. See Bluetooth specification,
+ Vol 3, Part F, Attribute Protocol.
+ @param[in] DataLength The length of Data in bytes.
+ @param[in] Callback Callback function to notify the RESPONSE is received to the caller, with the
+ response buffer. Caller must check the response buffer content to know if the
+ request action is success or fail. It may be NULL if the data is a COMMAND.
+ @param[in] Context Data passed into Callback function. It is optional parameter and may be NULL.
+
+ @retval EFI_SUCCESS The request is sent successfully.
+ @retval EFI_INVALID_PARAMETER One or more parameters are invalid due to following conditions:
+ - The Buffer is NULL.
+ - The BufferLength is 0.
+ - The opcode in Buffer is not a valid OPCODE according to Bluetooth specification.
+ - The Callback is NULL.
+ @retval EFI_DEVICE_ERROR Sending the request failed due to the host controller or the device error.
+ @retval EFI_NOT_READY A GATT operation is already underway for this device.
+ @retval EFI_UNSUPPORTED The attribute does not support the corresponding operation.
+
+**/
+typedef
+EFI_STATUS
+(EFIAPI *EFI_BLUETOOTH_ATTRIBUTE_SEND_REQUEST) (
+ IN EFI_BLUETOOTH_ATTRIBUTE_PROTOCOL *This,
+ IN VOID *Data,
+ IN UINTN DataLength,
+ IN EFI_BLUETOOTH_ATTRIBUTE_CALLBACK_FUNCTION Callback,
+ IN VOID *Context
+ );
+
+/**
+ Register or unregister a server initiated message, such as NOTIFICATION or INDICATION, on a
+ characteristic value on remote server.
+
+ @param[in] This Pointer to the EFI_BLUETOOTH_ATTRIBUTE_PROTOCOL instance.
+ @param[in] CallbackParameter The parameter of the callback.
+ @param[in] Callback Callback function for server initiated attribute protocol. NULL callback
+ function means unregister the server initiated callback.
+ @param[in] Context Data passed into Callback function. It is optional parameter and may be NULL.
+
+ @retval EFI_SUCCESS The callback function is registered or unregistered successfully
+ @retval EFI_INVALID_PARAMETER The attribute opcode is not server initiated message opcode. See
+ Bluetooth specification, Vol 3, Part F, Attribute Protocol.
+ @retval EFI_ALREADY_STARTED A callback function is already registered on the same attribute
+ opcode and attribute handle, when the Callback is not NULL.
+ @retval EFI_NOT_STARTED A callback function is not registered on the same attribute opcode
+ and attribute handle, when the Callback is NULL.
+ @retval EFI_NOT_READY A GATT operation is already underway for this device.
+ @retval EFI_UNSUPPORTED The attribute does not support notification.
+
+**/
+typedef
+EFI_STATUS
+(EFIAPI *EFI_BLUETOOTH_ATTRIBUTE_REGISTER_FOR_SERVER_NOTIFICATION)(
+ IN EFI_BLUETOOTH_ATTRIBUTE_PROTOCOL *This,
+ IN EFI_BLUETOOTH_ATTRIBUTE_CALLBACK_PARAMETER *CallbackParameter,
+ IN EFI_BLUETOOTH_ATTRIBUTE_CALLBACK_FUNCTION Callback,
+ IN VOID *Context
+ );
+
+/**
+ Get Bluetooth discovered service information.
+
+ @param[in] This Pointer to the EFI_BLUETOOTH_ATTRIBUTE_PROTOCOL instance.
+ @param[out] ServiceInfoSize A pointer to the size, in bytes, of the ServiceInfo buffer.
+ @param[out] ServiceInfo A pointer to a callee allocated buffer that returns Bluetooth
+ discovered service information. Callee allocates this buffer by
+ using EFI Boot Service AllocatePool().
+
+ @retval EFI_SUCCESS The Bluetooth discovered service information is returned successfully.
+ @retval EFI_DEVICE_ERROR A hardware error occurred trying to retrieve the Bluetooth discovered
+ service information.
+
+**/
+typedef
+EFI_STATUS
+(EFIAPI *EFI_BLUETOOTH_ATTRIBUTE_GET_SERVICE_INFO)(
+ IN EFI_BLUETOOTH_ATTRIBUTE_PROTOCOL *This,
+ OUT UINTN *ServiceInfoSize,
+ OUT VOID **ServiceInfo
+ );
+
+/**
+ Get Bluetooth device information.
+
+ @param[in] This Pointer to the EFI_BLUETOOTH_ATTRIBUTE_PROTOCOL instance.
+ @param[out] DeviceInfoSize A pointer to the size, in bytes, of the DeviceInfo buffer.
+ @param[out] DeviceInfo A pointer to a callee allocated buffer that returns Bluetooth
+ device information. Callee allocates this buffer by using EFI Boot
+ Service AllocatePool(). If this device is Bluetooth classic
+ device, EFI_BLUETOOTH_DEVICE_INFO should be used. If
+ this device is Bluetooth LE device, EFI_BLUETOOTH_LE_DEVICE_INFO
+ should be used.
+
+ @retval EFI_SUCCESS The Bluetooth device information is returned successfully.
+ @retval EFI_DEVICE_ERROR A hardware error occurred trying to retrieve the Bluetooth device
+ information
+
+**/
+typedef
+EFI_STATUS
+(EFIAPI *EFI_BLUETOOTH_ATTRIBUTE_GET_DEVICE_INFO)(
+ IN EFI_BLUETOOTH_ATTRIBUTE_PROTOCOL *This,
+ OUT UINTN *DeviceInfoSize,
+ OUT VOID **DeviceInfo
+ );
+
+struct _EFI_BLUETOOTH_ATTRIBUTE_PROTOCOL {
+ EFI_BLUETOOTH_ATTRIBUTE_SEND_REQUEST SendRequest;
+ EFI_BLUETOOTH_ATTRIBUTE_REGISTER_FOR_SERVER_NOTIFICATION RegisterForServerNotification;
+ EFI_BLUETOOTH_ATTRIBUTE_GET_SERVICE_INFO GetServiceInfo;
+ EFI_BLUETOOTH_ATTRIBUTE_GET_DEVICE_INFO GetDeviceInfo;
+};
+
+
+extern EFI_GUID gEfiBluetoothAttributeProtocolGuid;
+extern EFI_GUID gEfiBluetoothAttributeServiceBindingProtocolGuid;
+
+#endif
+
diff --git a/MdePkg/Include/Protocol/BluetoothLeConfig.h b/MdePkg/Include/Protocol/BluetoothLeConfig.h
new file mode 100644
index 0000000000..92d4fc2667
--- /dev/null
+++ b/MdePkg/Include/Protocol/BluetoothLeConfig.h
@@ -0,0 +1,634 @@
+/** @file
+ EFI Bluetooth LE Config Protocol as defined in UEFI 2.7.
+ This protocol abstracts user interface configuration for BluetoothLe device.
+
+ Copyright (c) 2017, Intel Corporation. All rights reserved.<BR>
+ This program and the accompanying materials are licensed and made available under
+ the terms and conditions of the BSD License that accompanies this distribution.
+ The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php.
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+ @par Revision Reference:
+ This Protocol is introduced in UEFI Specification 2.7
+
+**/
+
+#ifndef __EFI_BLUETOOTH_LE_CONFIG_H__
+#define __EFI_BLUETOOTH_LE_CONFIG_H__
+
+#include <Protocol/BluetoothConfig.h>
+#include <Protocol/BluetoothAttribute.h>
+
+#define EFI_BLUETOOTH_LE_CONFIG_PROTOCOL_GUID \
+ { \
+ 0x8f76da58, 0x1f99, 0x4275, { 0xa4, 0xec, 0x47, 0x56, 0x51, 0x5b, 0x1c, 0xe8 } \
+ }
+
+typedef struct _EFI_BLUETOOTH_LE_CONFIG_PROTOCOL EFI_BLUETOOTH_LE_CONFIG_PROTOCOL;
+
+/**
+ Initialize BluetoothLE host controller and local device.
+
+ The Init() function initializes BluetoothLE host controller and local device.
+
+ @param[in] This Pointer to the EFI_BLUETOOTH_LE_CONFIG_PROTOCOL instance.
+
+ @retval EFI_SUCCESS The BluetoothLE host controller and local device is initialized successfully.
+ @retval EFI_DEVICE_ERROR A hardware error occurred trying to initialize the BluetoothLE host controller
+ and local device.
+
+**/
+typedef
+EFI_STATUS
+(EFIAPI *EFI_BLUETOOTH_LE_CONFIG_INIT)(
+ IN EFI_BLUETOOTH_LE_CONFIG_PROTOCOL *This
+ );
+
+typedef struct {
+ ///
+ /// The version of the structure. A value of zero represents the EFI_BLUETOOTH_LE_CONFIG_SCAN_PARAMETER
+ /// structure as defined here. Future version of this specification may extend this data structure in a
+ /// backward compatible way and increase the value of Version.
+ ///
+ UINT32 Version;
+ ///
+ /// Passive scanning or active scanning. See Bluetooth specification.
+ ///
+ UINT8 ScanType;
+ ///
+ /// Recommended scan interval to be used while performing scan.
+ ///
+ UINT16 ScanInterval;
+ ///
+ /// Recommended scan window to be used while performing a scan.
+ ///
+ UINT16 ScanWindow;
+ ///
+ /// Recommended scanning filter policy to be used while performing a scan.
+ ///
+ UINT8 ScanningFilterPolicy;
+ ///
+ /// This is one byte flag to serve as a filter to remove unneeded scan
+ /// result. For example, set BIT0 means scan in LE Limited Discoverable
+ /// Mode. Set BIT1 means scan in LE General Discoverable Mode.
+ ///
+ UINT8 AdvertisementFlagFilter;
+} EFI_BLUETOOTH_LE_CONFIG_SCAN_PARAMETER;
+
+typedef struct{
+ BLUETOOTH_LE_ADDRESS BDAddr;
+ BLUETOOTH_LE_ADDRESS DirectAddress;
+ UINT8 RemoteDeviceState;
+ INT8 RSSI;
+ UINTN AdvertisementDataSize;
+ VOID *AdvertisementData;
+} EFI_BLUETOOTH_LE_SCAN_CALLBACK_INFORMATION;
+
+/**
+ Callback function, it is called if a BluetoothLE device is found during scan process.
+
+ @param[in] This Pointer to the EFI_BLUETOOTH_LE_CONFIG_PROTOCOL instance.
+ @param[in] Context Context passed from scan request.
+ @param[in] CallbackInfo Data related to scan result. NULL CallbackInfo means scan complete.
+
+ @retval EFI_SUCCESS The callback function complete successfully.
+
+**/
+typedef
+EFI_STATUS
+(EFIAPI *EFI_BLUETOOTH_LE_CONFIG_SCAN_CALLBACK_FUNCTION) (
+ IN EFI_BLUETOOTH_LE_CONFIG_PROTOCOL *This,
+ IN VOID *Context,
+ IN EFI_BLUETOOTH_LE_SCAN_CALLBACK_INFORMATION *CallbackInfo
+ );
+
+/**
+ Scan BluetoothLE device.
+
+ The Scan() function scans BluetoothLE device. When this function is returned, it just means scan
+ request is submitted. It does not mean scan process is started or finished. Whenever there is a
+ BluetoothLE device is found, the Callback function will be called. Callback function might be
+ called before this function returns or after this function returns
+
+ @param[in] This Pointer to the EFI_BLUETOOTH_LE_CONFIG_PROTOCOL instance.
+ @param[in] ReScan If TRUE, a new scan request is submitted no matter there is scan result before.
+ If FALSE and there is scan result, the previous scan result is returned and no scan request
+ is submitted.
+ @param[in] Timeout Duration in milliseconds for which to scan.
+ @param[in] ScanParameter If it is not NULL, the ScanParameter is used to perform a scan by the BluetoothLE bus driver.
+ If it is NULL, the default parameter is used.
+ @param[in] Callback The callback function. This function is called if a BluetoothLE device is found during
+ scan process.
+ @param[in] Context Data passed into Callback function. This is optional parameter and may be NULL.
+
+ @retval EFI_SUCCESS The Bluetooth scan request is submitted.
+ @retval EFI_DEVICE_ERROR A hardware error occurred trying to scan the BluetoothLE device.
+
+**/
+typedef
+EFI_STATUS
+(EFIAPI *EFI_BLUETOOTH_LE_CONFIG_SCAN)(
+ IN EFI_BLUETOOTH_LE_CONFIG_PROTOCOL *This,
+ IN BOOLEAN ReScan,
+ IN UINT32 Timeout,
+ IN EFI_BLUETOOTH_LE_CONFIG_SCAN_PARAMETER *ScanParameter, OPTIONAL
+ IN EFI_BLUETOOTH_LE_CONFIG_SCAN_CALLBACK_FUNCTION Callback,
+ IN VOID *Context
+ );
+
+typedef struct {
+ ///
+ /// The version of the structure. A value of zero represents the
+ /// EFI_BLUETOOTH_LE_CONFIG_CONNECT_PARAMETER
+ /// structure as defined here. Future version of this specification may
+ /// extend this data structure in a backward compatible way and
+ /// increase the value of Version.
+ ///
+ UINT32 Version;
+ ///
+ /// Recommended scan interval to be used while performing scan before connect.
+ ///
+ UINT16 ScanInterval;
+ ///
+ /// Recommended scan window to be used while performing a connection
+ ///
+ UINT16 ScanWindow;
+ ///
+ /// Minimum allowed connection interval. Shall be less than or equal to ConnIntervalMax.
+ ///
+ UINT16 ConnIntervalMin;
+ ///
+ /// Maximum allowed connection interval. Shall be greater than or equal to ConnIntervalMin.
+ ///
+ UINT16 ConnIntervalMax;
+ ///
+ /// Slave latency for the connection in number of connection events.
+ ///
+ UINT16 ConnLatency;
+ ///
+ /// Link supervision timeout for the connection.
+ ///
+ UINT16 SupervisionTimeout;
+} EFI_BLUETOOTH_LE_CONFIG_CONNECT_PARAMETER;
+
+/**
+ Connect a BluetoothLE device.
+
+ The Connect() function connects a Bluetooth device. When this function is returned successfully,
+ a new EFI_BLUETOOTH_IO_PROTOCOL is created.
+
+ @param[in] This Pointer to the EFI_BLUETOOTH_LE_CONFIG_PROTOCOL instance.
+ @param[in] AutoReconnect If TRUE, the BluetoothLE host controller needs to do an auto
+ reconnect. If FALSE, the BluetoothLE host controller does not do
+ an auto reconnect.
+ @param[in] DoBonding If TRUE, the BluetoothLE host controller needs to do a bonding.
+ If FALSE, the BluetoothLE host controller does not do a bonding.
+ @param[in] ConnectParameter If it is not NULL, the ConnectParameter is used to perform a
+ scan by the BluetoothLE bus driver. If it is NULL, the default
+ parameter is used.
+ @param[in] BD_ADDR The address of the BluetoothLE device to be connected.
+
+ @retval EFI_SUCCESS The BluetoothLE device is connected successfully.
+ @retval EFI_ALREADY_STARTED The BluetoothLE device is already connected.
+ @retval EFI_NOT_FOUND The BluetoothLE device is not found.
+ @retval EFI_DEVICE_ERROR A hardware error occurred trying to connect the BluetoothLE device.
+
+**/
+typedef
+EFI_STATUS
+(EFIAPI *EFI_BLUETOOTH_LE_CONFIG_CONNECT)(
+ IN EFI_BLUETOOTH_LE_CONFIG_PROTOCOL *This,
+ IN BOOLEAN AutoReconnect,
+ IN BOOLEAN DoBonding,
+ IN EFI_BLUETOOTH_LE_CONFIG_CONNECT_PARAMETER *ConnectParameter, OPTIONAL
+ IN BLUETOOTH_LE_ADDRESS *BD_ADDR
+ );
+
+/**
+ Disconnect a BluetoothLE device.
+
+ The Disconnect() function disconnects a BluetoothLE device. When this function is returned
+ successfully, the EFI_BLUETOOTH_ATTRIBUTE_PROTOCOL associated with this device is
+ destroyed and all services associated are stopped.
+
+ @param[in] This Pointer to the EFI_BLUETOOTH_LE_CONFIG_PROTOCOL instance.
+ @param[in] BD_ADDR The address of BluetoothLE device to be connected.
+ @param[in] Reason Bluetooth disconnect reason. See Bluetooth specification for detail.
+
+ @retval EFI_SUCCESS The BluetoothLE device is disconnected successfully.
+ @retval EFI_NOT_STARTED The BluetoothLE device is not connected.
+ @retval EFI_NOT_FOUND The BluetoothLE device is not found.
+ @retval EFI_DEVICE_ERROR A hardware error occurred trying to disconnect the BluetoothLE device.
+
+**/
+typedef
+EFI_STATUS
+(EFIAPI *EFI_BLUETOOTH_LE_CONFIG_DISCONNECT)(
+ IN EFI_BLUETOOTH_LE_CONFIG_PROTOCOL *This,
+ IN BLUETOOTH_LE_ADDRESS *BD_ADDR,
+ IN UINT8 Reason
+ );
+
+/**
+ Get BluetoothLE configuration data.
+
+ The GetData() function returns BluetoothLE configuration data. For remote BluetoothLE device
+ configuration data, please use GetRemoteData() function with valid BD_ADDR.
+
+ @param[in] This Pointer to the EFI_BLUETOOTH_LE_CONFIG_PROTOCOL instance.
+ @param[in] DataType Configuration data type.
+ @param[in, out] DataSize On input, indicates the size, in bytes, of the data buffer specified by Data.
+ On output, indicates the amount of data actually returned.
+ @param[in, out] Data A pointer to the buffer of data that will be returned.
+
+ @retval EFI_SUCCESS The BluetoothLE configuration data is returned successfully.
+ @retval EFI_INVALID_PARAMETER One or more of the following conditions is TRUE:
+ - DataSize is NULL.
+ - *DataSize is 0.
+ - Data is NULL.
+ @retval EFI_UNSUPPORTED The DataType is unsupported.
+ @retval EFI_NOT_FOUND The DataType is not found.
+ @retval EFI_BUFFER_TOO_SMALL The buffer is too small to hold the buffer.
+
+**/
+typedef
+EFI_STATUS
+(EFIAPI *EFI_BLUETOOTH_LE_CONFIG_GET_DATA) (
+ IN EFI_BLUETOOTH_LE_CONFIG_PROTOCOL *This,
+ IN EFI_BLUETOOTH_CONFIG_DATA_TYPE DataType,
+ IN OUT UINTN *DataSize,
+ IN OUT VOID *Data OPTIONAL
+ );
+
+/**
+ Set BluetoothLE configuration data.
+
+ The SetData() function sets local BluetoothLE device configuration data. Not all DataType can be
+ set.
+
+ @param[in] This Pointer to the EFI_BLUETOOTH_LE_CONFIG_PROTOCOL instance.
+ @param[in] DataType Configuration data type.
+ @param[in] DataSize Indicates the size, in bytes, of the data buffer specified by Data.
+ @param[in] Data A pointer to the buffer of data that will be set.
+
+ @retval EFI_SUCCESS The BluetoothLE configuration data is set successfully.
+ @retval EFI_INVALID_PARAMETER One or more of the following conditions is TRUE:
+ - DataSize is 0.
+ - Data is NULL.
+ @retval EFI_UNSUPPORTED The DataType is unsupported.
+ @retval EFI_WRITE_PROTECTED Cannot set configuration data.
+
+**/
+typedef
+EFI_STATUS
+(EFIAPI *EFI_BLUETOOTH_LE_CONFIG_SET_DATA) (
+ IN EFI_BLUETOOTH_LE_CONFIG_PROTOCOL *This,
+ IN EFI_BLUETOOTH_CONFIG_DATA_TYPE DataType,
+ IN UINTN DataSize,
+ IN VOID *Data
+ );
+
+/**
+ Get remove BluetoothLE device configuration data.
+
+ The GetRemoteData() function returns remote BluetoothLE device configuration data.
+
+ @param[in] This Pointer to the EFI_BLUETOOTH_LE_CONFIG_PROTOCOL instance.
+ @param[in] DataType Configuration data type.
+ @param[in] BDAddr Remote BluetoothLE device address.
+ @param[in, out] DataSize On input, indicates the size, in bytes, of the data buffer specified by Data.
+ On output, indicates the amount of data actually returned.
+ @param[in, out] Data A pointer to the buffer of data that will be returned.
+
+ @retval EFI_SUCCESS The remote BluetoothLE device configuration data is returned successfully.
+ @retval EFI_INVALID_PARAMETER One or more of the following conditions is TRUE:
+ - DataSize is NULL.
+ - *DataSize is 0.
+ - Data is NULL.
+ @retval EFI_UNSUPPORTED The DataType is unsupported.
+ @retval EFI_NOT_FOUND The DataType is not found.
+ @retval EFI_BUFFER_TOO_SMALL The buffer is too small to hold the buffer.
+
+**/
+typedef
+EFI_STATUS
+(EFIAPI *EFI_BLUETOOTH_LE_CONFIG_GET_REMOTE_DATA) (
+ IN EFI_BLUETOOTH_LE_CONFIG_PROTOCOL *This,
+ IN EFI_BLUETOOTH_CONFIG_DATA_TYPE DataType,
+ IN BLUETOOTH_LE_ADDRESS *BDAddr,
+ IN OUT UINTN *DataSize,
+ IN OUT VOID *Data
+ );
+
+typedef enum {
+ ///
+ /// It indicates an authorization request. No data is associated with the callback
+ /// input. In the output data, the application should return the authorization value.
+ /// The data structure is BOOLEAN. TRUE means YES. FALSE means NO.
+ ///
+ EfiBluetoothSmpAuthorizationRequestEvent,
+ ///
+ /// It indicates that a passkey has been generated locally by the driver, and the same
+ /// passkey should be entered at the remote device. The callback input data is the
+ /// passkey of type UINT32, to be displayed by the application. No output data
+ /// should be returned.
+ ///
+ EfiBluetoothSmpPasskeyReadyEvent,
+ ///
+ /// It indicates that the driver is requesting for the passkey has been generated at
+ /// the remote device. No data is associated with the callback input. The output data
+ /// is the passkey of type UINT32, to be entered by the user.
+ ///
+ EfiBluetoothSmpPasskeyRequestEvent,
+ ///
+ /// It indicates that the driver is requesting for the passkey that has been pre-shared
+ /// out-of-band with the remote device. No data is associated with the callback
+ /// input. The output data is the stored OOB data of type UINT8[16].
+ ///
+ EfiBluetoothSmpOOBDataRequestEvent,
+ ///
+ /// In indicates that a number have been generated locally by the bus driver, and
+ /// also at the remote device, and the bus driver wants to know if the two numbers
+ /// match. The callback input data is the number of type UINT32. The output data
+ /// is confirmation value of type BOOLEAN. TRUE means comparison pass. FALSE
+ /// means comparison fail.
+ ///
+ EfiBluetoothSmpNumericComparisonEvent,
+} EFI_BLUETOOTH_LE_SMP_EVENT_DATA_TYPE;
+
+/**
+ The callback function for SMP.
+
+ @param[in] This Pointer to the EFI_BLUETOOTH_LE_CONFIG_PROTOCOL instance.
+ @param[in] Context Data passed into callback function. This is optional parameter
+ and may be NULL.
+ @param[in] BDAddr Remote BluetoothLE device address.
+ @param[in] EventDataType Event data type in EFI_BLUETOOTH_LE_SMP_EVENT_DATA_TYPE.
+ @param[in] DataSize Indicates the size, in bytes, of the data buffer specified by Data.
+ @param[in] Data A pointer to the buffer of data.
+
+ @retval EFI_SUCCESS The callback function complete successfully.
+
+**/
+typedef
+EFI_STATUS
+(EFIAPI *EFI_BLUETOOTH_LE_SMP_CALLBACK) (
+ IN EFI_BLUETOOTH_LE_CONFIG_PROTOCOL *This,
+ IN VOID *Context,
+ IN BLUETOOTH_LE_ADDRESS *BDAddr,
+ IN EFI_BLUETOOTH_LE_SMP_EVENT_DATA_TYPE EventDataType,
+ IN UINTN DataSize,
+ IN VOID *Data
+ );
+
+/**
+ Register Security Manager Protocol callback function for user authentication/authorization.
+
+ The RegisterSmpAuthCallback() function register Security Manager Protocol callback
+ function for user authentication/authorization.
+
+ @param[in] This Pointer to the EFI_BLUETOOTH_LE_CONFIG_PROTOCOL instance.
+ @param[in] Callback Callback function for user authentication/authorization.
+ @param[in] Context Data passed into Callback function. This is optional parameter and may be NULL.
+
+ @retval EFI_SUCCESS The SMP callback function is registered successfully.
+ @retval EFI_ALREADY_STARTED A callback function is already registered on the same attribute
+ opcode and attribute handle, when the Callback is not NULL.
+ @retval EFI_NOT_STARTED A callback function is not registered on the same attribute opcode
+ and attribute handle, when the Callback is NULL.
+
+**/
+typedef
+EFI_STATUS
+(EFIAPI *EFI_BLUETOOTH_LE_REGISTER_SMP_AUTH_CALLBACK) (
+ IN EFI_BLUETOOTH_LE_CONFIG_PROTOCOL *This,
+ IN EFI_BLUETOOTH_LE_SMP_CALLBACK Callback,
+ IN VOID *Context
+ );
+
+/**
+ Send user authentication/authorization to remote device.
+
+ The SendSmpAuthData() function sends user authentication/authorization to remote device. It
+ should be used to send these information after the caller gets the request data from the callback
+ function by RegisterSmpAuthCallback().
+
+ @param[in] This Pointer to the EFI_BLUETOOTH_LE_CONFIG_PROTOCOL instance.
+ @param[in] BDAddr Remote BluetoothLE device address.
+ @param[in] EventDataType Event data type in EFI_BLUETOOTH_LE_SMP_EVENT_DATA_TYPE.
+ @param[in] DataSize The size of Data in bytes, of the data buffer specified by Data.
+ @param[in] Data A pointer to the buffer of data that will be sent. The data format
+ depends on the type of SMP event data being responded to.
+
+ @retval EFI_SUCCESS The SMP authorization data is sent successfully.
+ @retval EFI_NOT_READY SMP is not in the correct state to receive the auth data.
+
+**/
+typedef
+EFI_STATUS
+(EFIAPI *EFI_BLUETOOTH_LE_SEND_SMP_AUTH_DATA) (
+ IN EFI_BLUETOOTH_LE_CONFIG_PROTOCOL *This,
+ IN BLUETOOTH_LE_ADDRESS *BDAddr,
+ IN EFI_BLUETOOTH_LE_SMP_EVENT_DATA_TYPE EventDataType,
+ IN UINTN DataSize,
+ IN VOID *Data
+ );
+
+typedef enum {
+ // For local device only
+ EfiBluetoothSmpLocalIR, /* If Key hierarchy is supported */
+ EfiBluetoothSmpLocalER, /* If Key hierarchy is supported */
+ EfiBluetoothSmpLocalDHK, /* If Key hierarchy is supported. OPTIONAL */
+ // For peer specific
+ EfiBluetoothSmpKeysDistributed = 0x1000,
+ EfiBluetoothSmpKeySize,
+ EfiBluetoothSmpKeyType,
+ EfiBluetoothSmpPeerLTK,
+ EfiBluetoothSmpPeerIRK,
+ EfiBluetoothSmpPeerCSRK,
+ EfiBluetoothSmpPeerRand,
+ EfiBluetoothSmpPeerEDIV,
+ EfiBluetoothSmpPeerSignCounter,
+ EfiBluetoothSmpLocalLTK, /* If Key hierarchy not supported */
+ EfiBluetoothSmpLocalIRK, /* If Key hierarchy not supported */
+ EfiBluetoothSmpLocalCSRK, /* If Key hierarchy not supported */
+ EfiBluetoothSmpLocalSignCounter,
+ EfiBluetoothSmpLocalDIV,
+} EFI_BLUETOOTH_LE_SMP_DATA_TYPE;
+
+/**
+ The callback function to get SMP data.
+
+ @param[in] This Pointer to the EFI_BLUETOOTH_LE_CONFIG_PROTOCOL instance.
+ @param[in] Context Data passed into callback function. This is optional parameter
+ and may be NULL.
+ @param[in] BDAddr Remote BluetoothLE device address. For Local device setting, it
+ should be NULL.
+ @param[in] DataType Data type in EFI_BLUETOOTH_LE_SMP_DATA_TYPE.
+ @param[in, out] DataSize On input, indicates the size, in bytes, of the data buffer specified
+ by Data. On output, indicates the amount of data actually returned.
+ @param[out] Data A pointer to the buffer of data that will be returned.
+
+ @retval EFI_SUCCESS The callback function complete successfully.
+
+**/
+typedef
+EFI_STATUS
+(EFIAPI * EFI_BLUETOOTH_LE_CONFIG_SMP_GET_DATA_CALLBACK) (
+ IN EFI_BLUETOOTH_LE_CONFIG_PROTOCOL *This,
+ IN VOID *Context,
+ IN BLUETOOTH_LE_ADDRESS *BDAddr,
+ IN EFI_BLUETOOTH_LE_SMP_DATA_TYPE DataType,
+ IN OUT UINTN *DataSize,
+ OUT VOID *Data
+ );
+
+/**
+ Register a callback function to get SMP related data.
+
+ The RegisterSmpGetDataCallback() function registers a callback function to get SMP related data.
+
+ @param[in] This Pointer to the EFI_BLUETOOTH_LE_CONFIG_PROTOCOL instance.
+ @param[in] Callback Callback function for SMP get data.
+ @param[in] Context Data passed into Callback function. This is optional parameter and may be NULL.
+
+ @retval EFI_SUCCESS The SMP get data callback function is registered successfully.
+ @retval EFI_ALREADY_STARTED A callback function is already registered on the same attribute
+ opcode and attribute handle, when the Callback is not NULL.
+ @retval EFI_NOT_STARTED A callback function is not registered on the same attribute opcode
+ and attribute handle, when the Callback is NULL
+**/
+typedef
+EFI_STATUS
+(EFIAPI * EFI_BLUETOOTH_LE_CONFIG_REGISTER_SMP_GET_DATA_CALLBACK) (
+ IN EFI_BLUETOOTH_LE_CONFIG_PROTOCOL *This,
+ IN EFI_BLUETOOTH_LE_CONFIG_SMP_GET_DATA_CALLBACK Callback,
+ IN VOID *Context
+ );
+
+/**
+ The callback function to set SMP data.
+
+ @param[in] This Pointer to the EFI_BLUETOOTH_LE_CONFIG_PROTOCOL instance.
+ @param[in] Context Data passed into callback function. This is optional parameter
+ and may be NULL.
+ @param[in] BDAddr Remote BluetoothLE device address.
+ @param[in] DataType Data type in EFI_BLUETOOTH_LE_SMP_DATA_TYPE.
+ @param[in] DataSize Indicates the size, in bytes, of the data buffer specified by Data.
+ @param[in] Data A pointer to the buffer of data.
+
+ @retval EFI_SUCCESS The callback function complete successfully.
+
+**/
+typedef
+EFI_STATUS
+(EFIAPI * EFI_BLUETOOTH_LE_CONFIG_SMP_SET_DATA_CALLBACK) (
+ IN EFI_BLUETOOTH_LE_CONFIG_PROTOCOL *This,
+ IN VOID *Context,
+ IN BLUETOOTH_LE_ADDRESS *BDAddr,
+ IN EFI_BLUETOOTH_LE_SMP_DATA_TYPE Type,
+ IN UINTN DataSize,
+ IN VOID *Data
+ );
+
+/**
+ Register a callback function to set SMP related data.
+
+ The RegisterSmpSetDataCallback() function registers a callback function to set SMP related data.
+
+ @param[in] This Pointer to the EFI_BLUETOOTH_LE_CONFIG_PROTOCOL instance.
+ @param[in] Callback Callback function for SMP set data.
+ @param[in] Context Data passed into Callback function. This is optional parameter and may be NULL.
+
+ @retval EFI_SUCCESS The SMP set data callback function is registered successfully.
+ @retval EFI_ALREADY_STARTED A callback function is already registered on the same attribute
+ opcode and attribute handle, when the Callback is not NULL.
+ @retval EFI_NOT_STARTED A callback function is not registered on the same attribute opcode
+ and attribute handle, when the Callback is NULL
+**/
+typedef
+EFI_STATUS
+(EFIAPI * EFI_BLUETOOTH_LE_CONFIG_REGISTER_SMP_SET_DATA_CALLBACK) (
+ IN EFI_BLUETOOTH_LE_CONFIG_PROTOCOL *This,
+ IN EFI_BLUETOOTH_LE_CONFIG_SMP_SET_DATA_CALLBACK Callback,
+ IN VOID *Context
+ );
+
+/**
+ The callback function to hook connect complete event.
+
+ @param[in] This Pointer to the EFI_BLUETOOTH_LE_CONFIG_PROTOCOL instance.
+ @param[in] Context Data passed into callback function. This is optional parameter
+ and may be NULL.
+ @param[in] CallbackType The value defined in EFI_BLUETOOTH_CONNECT_COMPLETE_CALLBACK_TYPE.
+ @param[in] BDAddr Remote BluetoothLE device address.
+ @param[in] InputBuffer A pointer to the buffer of data that is input from callback caller.
+ @param[in] InputBufferSize Indicates the size, in bytes, of the data buffer specified by InputBuffer.
+
+ @retval EFI_SUCCESS The callback function complete successfully.
+
+**/
+typedef
+EFI_STATUS
+(EFIAPI *EFI_BLUETOOTH_LE_CONFIG_CONNECT_COMPLETE_CALLBACK) (
+ IN EFI_BLUETOOTH_LE_CONFIG_PROTOCOL *This,
+ IN VOID *Context,
+ IN EFI_BLUETOOTH_CONNECT_COMPLETE_CALLBACK_TYPE CallbackType,
+ IN BLUETOOTH_LE_ADDRESS *BDAddr,
+ IN VOID *InputBuffer,
+ IN UINTN InputBufferSize
+ );
+
+/**
+ Register link connect complete callback function.
+
+ The RegisterLinkConnectCompleteCallback() function registers Bluetooth link connect
+ complete callback function. The Bluetooth Configuration driver may call
+ RegisterLinkConnectCompleteCallback() to register a callback function. During pairing,
+ Bluetooth bus driver must trigger this callback function to report device state, if it is registered.
+ Then Bluetooth Configuration driver will get information on device connection, according to
+ CallbackType defined by EFI_BLUETOOTH_CONNECT_COMPLETE_CALLBACK_TYPE
+
+ @param[in] This Pointer to the EFI_BLUETOOTH_LE_CONFIG_PROTOCOL instance.
+ @param[in] Callback The callback function. NULL means unregister.
+ @param[in] Context Data passed into Callback function. This is optional parameter and may be NULL.
+
+ @retval EFI_SUCCESS The link connect complete callback function is registered successfully.
+ @retval EFI_ALREADY_STARTED A callback function is already registered on the same attribute
+ opcode and attribute handle, when the Callback is not NULL.
+ @retval EFI_NOT_STARTED A callback function is not registered on the same attribute opcode
+ and attribute handle, when the Callback is NULL
+**/
+typedef
+EFI_STATUS
+(EFIAPI *EFI_BLUETOOTH_LE_CONFIG_REGISTER_CONNECT_COMPLETE_CALLBACK) (
+ IN EFI_BLUETOOTH_LE_CONFIG_PROTOCOL *This,
+ IN EFI_BLUETOOTH_LE_CONFIG_CONNECT_COMPLETE_CALLBACK Callback,
+ IN VOID *Context
+ );
+
+///
+/// This protocol abstracts user interface configuration for BluetoothLe device.
+///
+struct _EFI_BLUETOOTH_LE_CONFIG_PROTOCOL {
+ EFI_BLUETOOTH_LE_CONFIG_INIT Init;
+ EFI_BLUETOOTH_LE_CONFIG_SCAN Scan;
+ EFI_BLUETOOTH_LE_CONFIG_CONNECT Connect;
+ EFI_BLUETOOTH_LE_CONFIG_DISCONNECT Disconnect;
+ EFI_BLUETOOTH_LE_CONFIG_GET_DATA GetData;
+ EFI_BLUETOOTH_LE_CONFIG_SET_DATA SetData;
+ EFI_BLUETOOTH_LE_CONFIG_GET_REMOTE_DATA GetRemoteData;
+ EFI_BLUETOOTH_LE_REGISTER_SMP_AUTH_CALLBACK RegisterSmpAuthCallback;
+ EFI_BLUETOOTH_LE_SEND_SMP_AUTH_DATA SendSmpAuthData;
+ EFI_BLUETOOTH_LE_CONFIG_REGISTER_SMP_GET_DATA_CALLBACK RegisterSmpGetDataCallback;
+ EFI_BLUETOOTH_LE_CONFIG_REGISTER_SMP_SET_DATA_CALLBACK RegisterSmpSetDataCallback;
+ EFI_BLUETOOTH_LE_CONFIG_REGISTER_CONNECT_COMPLETE_CALLBACK RegisterLinkConnectCompleteCallback;
+};
+
+extern EFI_GUID gEfiBluetoothLeConfigProtocolGuid;
+
+#endif
+
diff --git a/MdePkg/MdePkg.dec b/MdePkg/MdePkg.dec
index 0c0672af52..7a7504b7a3 100644
--- a/MdePkg/MdePkg.dec
+++ b/MdePkg/MdePkg.dec
@@ -1662,6 +1662,16 @@ [Protocols]
gEfiEraseBlockProtocolGuid = { 0x95a9a93e, 0xa86e, 0x4926, {0xaa, 0xef, 0x99, 0x18, 0xe7, 0x72, 0xd9, 0x87 }}
#
+ # Protocols defined in UEFI2.7
+ #
+ ## Include/Protocol/BluetoothAttribute.h
+ gEfiBluetoothAttributeProtocolGuid = { 0x898890e9, 0x84b2, 0x4f3a, { 0x8c, 0x58, 0xd8, 0x57, 0x78, 0x13, 0xe0, 0xac } }
+ gEfiBluetoothAttributeServiceBindingProtocolGuid = { 0x5639867a, 0x8c8e, 0x408d, {0xac, 0x2f, 0x4b, 0x61, 0xbd, 0xc0, 0xbb, 0xbb }}
+
+ ## Include/Protocol/BluetoothLeConfig.h
+ gEfiBluetoothLeConfigProtocolGuid = { 0x8f76da58, 0x1f99, 0x4275, { 0xa4, 0xec, 0x47, 0x56, 0x51, 0x5b, 0x1c, 0xe8 } }
+
+ #
# Protocols defined in Shell2.0
#
## Include/Protocol/Shell.h
--
2.12.2.windows.2
next prev parent reply other threads:[~2017-06-06 3:34 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-06-06 3:35 [PATCH v2 0/5] Add Bluetooth LE definitions per UEFI Spec 2.7 Ruiyu Ni
2017-06-06 3:35 ` [PATCH v2 1/5] MdePkg/DevicePath: Add BluetoothLe device path node support Ruiyu Ni
2017-06-06 6:42 ` Wu, Hao A
2017-06-06 3:35 ` [PATCH v2 2/5] MdePkg/BluetoothConfig: Add new EFI_BLUETOOTH_CONFIG_DATA_TYPE types Ruiyu Ni
2017-06-06 3:35 ` [PATCH v2 3/5] MdePkg/BluetoothHc: Add detailed function header comments Ruiyu Ni
2017-06-06 3:35 ` [PATCH v2 4/5] MdePkg/BluetoothIo: Formalize " Ruiyu Ni
2017-06-06 3:35 ` Ruiyu Ni [this message]
2017-06-06 4:46 ` [PATCH v2 0/5] Add Bluetooth LE definitions per UEFI Spec 2.7 Yao, Jiewen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170606033543.254936-6-ruiyu.ni@intel.com \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox