From: Leif Lindholm <leif.lindholm@linaro.org>
To: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: "edk2-devel@lists.01.org" <edk2-devel@lists.01.org>,
Ryan Harkin <ryan.harkin@linaro.org>
Subject: Re: [PATCH] ArmPlatformPkg: convert VExpress ResetSystemLib to ResetSystemLib
Date: Tue, 4 Jul 2017 12:46:20 +0100 [thread overview]
Message-ID: <20170704114620.GO26676@bivouac.eciton.net> (raw)
In-Reply-To: <CAKv+Gu-_oKLAUZo-2EJysDAbb8_FnXqokO2nUjppL0empW4dPA@mail.gmail.com>
On Tue, Jul 04, 2017 at 12:35:34PM +0100, Ard Biesheuvel wrote:
> On 4 July 2017 at 12:29, Leif Lindholm <leif.lindholm@linaro.org> wrote:
> > Since we're in the process of migrating all of the VExpress platforms
> > to MdeModulePkg ResetSystemRuntimeDxe, convert VExpress ResetSystemLib
> > from EfiResetSystemLib interface to the ResetSystemLib one.
> >
> > Contributed-under: TianoCore Contribution Agreement 1.0
> > Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
> > ---
> > .../Library/ResetSystemLib/ResetSystemLib.c | 118 ++++++++++++---------
> > .../Library/ResetSystemLib/ResetSystemLib.inf | 4 +-
> > 2 files changed, 72 insertions(+), 50 deletions(-)
> >
> > diff --git a/ArmPlatformPkg/ArmVExpressPkg/Library/ResetSystemLib/ResetSystemLib.c b/ArmPlatformPkg/ArmVExpressPkg/Library/ResetSystemLib/ResetSystemLib.c
> > index bafb6f8093..45bb0ab848 100644
> > --- a/ArmPlatformPkg/ArmVExpressPkg/Library/ResetSystemLib/ResetSystemLib.c
> > +++ b/ArmPlatformPkg/ArmVExpressPkg/Library/ResetSystemLib/ResetSystemLib.c
> > @@ -5,6 +5,7 @@
> >
> > Copyright (c) 2008 - 2009, Apple Inc. All rights reserved.<BR>
> > Copyright (c) 2013, ARM Ltd. All rights reserved.<BR>
> > + Copyright (c) 2017, Linaro Ltd. All rights reserved.<BR>
> >
> > This program and the accompanying materials
> > are licensed and made available under the terms and conditions of the BSD License
> > @@ -16,73 +17,92 @@
> >
> > **/
> >
> > -#include <PiDxe.h>
> > +#include <Base.h>
> >
> > -#include <Library/BaseLib.h>
> > #include <Library/DebugLib.h>
> > -#include <Library/EfiResetSystemLib.h>
> > -#include <Library/ArmPlatformSysConfigLib.h>
> > -
> > -#include <ArmPlatform.h>
>
> Don't we need some of these for the definitions of
> ArmPlatformSysConfigSet and SYS_CFG_REBOOT?
Yes, I messed up the corresponding changes in OpenPlatformPkg for the
build test...
Thanks. Update coming.
> > +#include <Library/ResetSystemLib.h>
> >
> > /**
> > - Resets the entire platform.
> > + This function causes a system-wide reset (cold reset), in which
> > + all circuitry within the system returns to its initial state. This type of
> > + reset is asynchronous to system operation and operates without regard to
> > + cycle boundaries.
> >
> > - @param ResetType The type of reset to perform.
> > - @param ResetStatus The status code for the reset.
> > - @param DataSize The size, in bytes, of WatchdogData.
> > - @param ResetData For a ResetType of EfiResetCold, EfiResetWarm, or
> > - EfiResetShutdown the data buffer starts with a Null-terminated
> > - Unicode string, optionally followed by additional binary data.
> > + If this function returns, it means that the system does not support cold
> > + reset.
> > +**/
> > +VOID
> > +EFIAPI
> > +ResetCold (
> > + VOID
> > + )
> > +{
> > + ArmPlatformSysConfigSet (SYS_CFG_REBOOT, 0);
> > +}
> >
> > +/**
> > + This function causes a system-wide initialization (warm reset), in which all
> > + processors are set to their initial state. Pending cycles are not corrupted.
> > +
> > + If this function returns, it means that the system does not support warm
> > + reset.
> > **/
> > -EFI_STATUS
> > +VOID
> > EFIAPI
> > -LibResetSystem (
> > - IN EFI_RESET_TYPE ResetType,
> > - IN EFI_STATUS ResetStatus,
> > - IN UINTN DataSize,
> > - IN CHAR16 *ResetData OPTIONAL
> > +ResetWarm (
> > + VOID
> > )
> > {
> > - switch (ResetType) {
> > - case EfiResetPlatformSpecific:
> > - // Map the platform specific reset as reboot
> > - case EfiResetWarm:
> > - // Map a warm reset into a cold reset
> > - case EfiResetCold:
> > - // Send the REBOOT function to the platform microcontroller
> > - ArmPlatformSysConfigSet (SYS_CFG_REBOOT, 0);
> > -
> > - // We should never be here
> > - while(1);
> > - case EfiResetShutdown:
> > - // Send the SHUTDOWN function to the platform microcontroller
> > - ArmPlatformSysConfigSet (SYS_CFG_SHUTDOWN, 0);
> > -
> > - // We should never be here
> > - while(1);
> > - }
> > -
> > - ASSERT(FALSE);
> > - return EFI_UNSUPPORTED;
> > + ResetCold ();
> > }
> >
> > /**
> > - Initialize any infrastructure required for LibResetSystem () to function.
> > + This function causes the system to enter a power state equivalent
> > + to the ACPI G2/S5 or G3 states.
> >
> > - @param ImageHandle The firmware allocated handle for the EFI image.
> > - @param SystemTable A pointer to the EFI System Table.
> > + If this function returns, it means that the system does not support shut down reset.
> > +**/
> > +VOID
> > +EFIAPI
> > +ResetShutdown (
> > + VOID
> > + )
> > +{
> > + ArmPlatformSysConfigSet (SYS_CFG_SHUTDOWN, 0);
> > +}
> >
> > - @retval EFI_SUCCESS The constructor always returns EFI_SUCCESS.
> > +/**
> > + This function causes the system to enter S3 and then wake up immediately.
> > +
> > + If this function returns, it means that the system does not support S3
> > + feature.
> > +**/
> > +VOID
> > +EFIAPI
> > +EnterS3WithImmediateWake (
> > + VOID
> > + )
> > +{
> > + // not implemented
> > +}
> >
> > +/**
> > + This function causes a systemwide reset. The exact type of the reset is
> > + defined by the EFI_GUID that follows the Null-terminated Unicode string passed
> > + into ResetData. If the platform does not recognize the EFI_GUID in ResetData
> > + the platform must pick a supported reset type to perform.The platform may
> > + optionally log the parameters from any non-normal reset that occurs.
> > +
> > + @param[in] DataSize The size, in bytes, of ResetData.
> > + @param[in] ResetData The data buffer starts with a Null-terminated string,
> > + followed by the EFI_GUID.
> > **/
> > -EFI_STATUS
> > +VOID
> > EFIAPI
> > -LibInitializeResetSystem (
> > - IN EFI_HANDLE ImageHandle,
> > - IN EFI_SYSTEM_TABLE *SystemTable
> > +ResetPlatformSpecific (
> > + IN UINTN DataSize,
> > + IN VOID *ResetData
> > )
> > {
> > - return EFI_SUCCESS;
> > + ResetCold ();
> > }
> > diff --git a/ArmPlatformPkg/ArmVExpressPkg/Library/ResetSystemLib/ResetSystemLib.inf b/ArmPlatformPkg/ArmVExpressPkg/Library/ResetSystemLib/ResetSystemLib.inf
> > index 8c17ea8cdb..bb87df50ef 100644
> > --- a/ArmPlatformPkg/ArmVExpressPkg/Library/ResetSystemLib/ResetSystemLib.inf
> > +++ b/ArmPlatformPkg/ArmVExpressPkg/Library/ResetSystemLib/ResetSystemLib.inf
> > @@ -2,6 +2,7 @@
> > # Reset System lib to make it easy to port new platforms
> > #
> > # Copyright (c) 2008, Apple Inc. All rights reserved.<BR>
> > +# Copyright (c) 2017, Linaro Ltd. All rights reserved.<BR>
> > #
> > # This program and the accompanying materials
> > # are licensed and made available under the terms and conditions of the BSD License
> > @@ -19,12 +20,13 @@
> > FILE_GUID = 36885202-0854-4373-bfd2-95d229b44d44
> > MODULE_TYPE = BASE
> > VERSION_STRING = 1.0
> > - LIBRARY_CLASS = EfiResetSystemLib
> > + LIBRARY_CLASS = ResetSystemLib
> >
> > [Sources.common]
> > ResetSystemLib.c
> >
> > [Packages]
> > + MdeModulePkg/MdeModulePkg.dec
> > MdePkg/MdePkg.dec
> > EmbeddedPkg/EmbeddedPkg.dec
>
> Do we still need this?
Unlikely.
> > ArmPlatformPkg/ArmPlatformPkg.dec
>
> ... and this, given my question above?
Probably.
/
Leif
prev parent reply other threads:[~2017-07-04 11:44 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-07-04 11:29 [PATCH] ArmPlatformPkg: convert VExpress ResetSystemLib to ResetSystemLib Leif Lindholm
2017-07-04 11:35 ` Ard Biesheuvel
2017-07-04 11:46 ` Leif Lindholm [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170704114620.GO26676@bivouac.eciton.net \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox