From: Leif Lindholm <leif.lindholm@linaro.org>
To: Scott Telford <stelford@cadence.com>
Cc: edk2-devel@ml01.01.org, afish@apple.com, michael.d.kinney@intel.com
Subject: Re: [staging/cadence-aarch64 PATCH] CadencePkg: switch to to generic ResetSystemRuntimeDxe
Date: Mon, 31 Jul 2017 17:38:34 +0100 [thread overview]
Message-ID: <20170731163833.GB1501@bivouac.eciton.net> (raw)
In-Reply-To: <1500999811-22999-1-git-send-email-stelford@cadence.com>
On Tue, Jul 25, 2017 at 05:23:31PM +0100, Scott Telford wrote:
> Change CadenceCspResetSystemLib to implement ResetSystemLib, consumed by
> MdeModulePkg/Universal/ResetSystemRuntimeDxe.
>
> Wire all reset variants to ResetCold, except for ResetShutdown and
> EnterS3WithImmediateWake, which return immediately.
>
> Contributed-under: TianoCore Contribution Agreement 1.0
> Signed-off-by: Scott Telford <stelford@cadence.com>
Looks good to me:
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Rebased to current edk2 HEAD and pushed the series to
edk2-staging:cadence-aarch64 as 559a165c68...3709125beb.
/
Leif
> ---
> Cadencepkg/CadenceCsp.dsc | 4 +-
> CadencePkg/CadenceCsp.fdf | 2 +-
> .../CadenceCspResetSystemLib.c | 121 +++++++++++++--------
> .../CadenceCspResetSystemLib.inf | 13 +--
> 4 files changed, 84 insertions(+), 56 deletions(-)
>
> diff --git a/CadencePkg/CadenceCsp.dsc b/CadencePkg/CadenceCsp.dsc
> index 3711b7b..ee4327d 100644
> --- a/CadencePkg/CadenceCsp.dsc
> +++ b/CadencePkg/CadenceCsp.dsc
> @@ -103,7 +103,7 @@
> ArmGenericTimerCounterLib|ArmPkg/Library/ArmGenericTimerPhyCounterLib/ArmGenericTimerPhyCounterLib.inf
>
> PlatformPeiLib|ArmPlatformPkg/PlatformPei/PlatformPeiLib.inf
> - EfiResetSystemLib|CadencePkg/Library/CadenceCspResetSystemLib/CadenceCspResetSystemLib.inf
> + ResetSystemLib|CadencePkg/Library/CadenceCspResetSystemLib/CadenceCspResetSystemLib.inf
>
> RealTimeClockLib|EmbeddedPkg/Library/TemplateRealTimeClockLib/TemplateRealTimeClockLib.inf
>
> @@ -620,7 +620,7 @@
> MdeModulePkg/Universal/CapsuleRuntimeDxe/CapsuleRuntimeDxe.inf
> MdeModulePkg/Universal/Variable/EmuRuntimeDxe/EmuVariableRuntimeDxe.inf
> MdeModulePkg/Universal/MonotonicCounterRuntimeDxe/MonotonicCounterRuntimeDxe.inf
> - EmbeddedPkg/ResetRuntimeDxe/ResetRuntimeDxe.inf
> + MdeModulePkg/Universal/ResetSystemRuntimeDxe/ResetSystemRuntimeDxe.inf
> EmbeddedPkg/RealTimeClockRuntimeDxe/RealTimeClockRuntimeDxe.inf
> EmbeddedPkg/MetronomeDxe/MetronomeDxe.inf
>
> diff --git a/CadencePkg/CadenceCsp.fdf b/CadencePkg/CadenceCsp.fdf
> index 8a9acbd..6fb1478 100644
> --- a/CadencePkg/CadenceCsp.fdf
> +++ b/CadencePkg/CadenceCsp.fdf
> @@ -152,7 +152,7 @@ FvNameGuid = b1e2a5cf-5357-4fc8-9532-49f3ce327bd3
> !endif
> INF MdeModulePkg/Universal/Variable/EmuRuntimeDxe/EmuVariableRuntimeDxe.inf
> INF MdeModulePkg/Universal/MonotonicCounterRuntimeDxe/MonotonicCounterRuntimeDxe.inf
> - INF EmbeddedPkg/ResetRuntimeDxe/ResetRuntimeDxe.inf
> + INF MdeModulePkg/Universal/ResetSystemRuntimeDxe/ResetSystemRuntimeDxe.inf
> INF EmbeddedPkg/RealTimeClockRuntimeDxe/RealTimeClockRuntimeDxe.inf
> INF EmbeddedPkg/MetronomeDxe/MetronomeDxe.inf
>
> diff --git a/CadencePkg/Library/CadenceCspResetSystemLib/CadenceCspResetSystemLib.c b/CadencePkg/Library/CadenceCspResetSystemLib/CadenceCspResetSystemLib.c
> index 20ea1a6..1996adc 100644
> --- a/CadencePkg/Library/CadenceCspResetSystemLib/CadenceCspResetSystemLib.c
> +++ b/CadencePkg/Library/CadenceCspResetSystemLib/CadenceCspResetSystemLib.c
> @@ -1,8 +1,8 @@
> /** @file
> - Library to support ResetSystem Runtime call.
> + ResetSystemLib implementation for Cadence CSP.
>
> - Copyright (c) 2008 - 2009, Apple Inc. All rights reserved.<BR>
> - Copyright (c) 2013, ARM Ltd. All rights reserved.<BR>
> + Copyright (c) 2008 - 2010, Apple Inc. All rights reserved.<BR>
> + Copyright (c) 2017, Linaro Ltd. All rights reserved.<BR>
> Copyright (c) 2017, Cadence Design Systems, Inc. All rights reserved.
>
> This program and the accompanying materials
> @@ -15,68 +15,97 @@
>
> **/
>
> -#include <PiDxe.h>
>
> -#include <Library/BaseLib.h>
> +#include <Uefi.h>
> +
> #include <Library/CspSysReg.h>
> -#include <Library/DebugLib.h>
> -#include <Library/EfiResetSystemLib.h>
> #include <Library/IoLib.h>
> -#include <Library/PcdLib.h>
> +#include <Library/ResetSystemLib.h>
> +
>
> /**
> - Resets the entire platform.
> + This function causes a system-wide reset (cold reset), in which
> + all circuitry within the system returns to its initial state. This type of
> + reset is asynchronous to system operation and operates without regard to
> + cycle boundaries.
> +
> + If this function returns, it means that the system does not support cold
> + reset.
> +**/
> +VOID
> +EFIAPI
> +ResetCold (
> + VOID
> + )
> +{
> + //Perform cold reset of the system using CSP System Registers.
> + MmioWrite32 ((PcdGet64(PcdCspSysRegBase) + CSP_SYSREG_SW_RESET), 0xDEAD);
> +}
>
> - @param ResetType The type of reset to perform.
> - @param ResetStatus The status code for the reset.
> - @param DataSize The size, in bytes, of WatchdogData.
> - @param ResetData For a ResetType of EfiResetCold, EfiResetWarm, or
> - EfiResetShutdown the data buffer starts with a Null-terminated
> - Unicode string, optionally followed by additional binary data.
> +/**
> + This function causes a system-wide initialization (warm reset), in which all
> + processors are set to their initial state. Pending cycles are not corrupted.
>
> + If this function returns, it means that the system does not support warm
> + reset.
> **/
> -EFI_STATUS
> +VOID
> EFIAPI
> -LibResetSystem (
> - IN EFI_RESET_TYPE ResetType,
> - IN EFI_STATUS ResetStatus,
> - IN UINTN DataSize,
> - IN CHAR16 *ResetData OPTIONAL
> +ResetWarm (
> + VOID
> )
> {
> - switch (ResetType) {
> - case EfiResetPlatformSpecific:
> - // Map the platform specific reset as reboot
> - case EfiResetWarm:
> - // Map a warm reset into a cold reset
> - case EfiResetShutdown:
> - // Map a shutdown into a cold reset
> - case EfiResetCold:
> - MmioWrite16((PcdGet64(PcdCspSysRegBase) + CSP_SYSREG_SW_RESET), 0xDEAD);
> - break;
> - default:
> - return EFI_INVALID_PARAMETER;
> - }
> -
> - ASSERT(FALSE);
> - return EFI_UNSUPPORTED;
> + ResetCold ();
> }
>
> /**
> - Initialize any infrastructure required for LibResetSystem () to function.
> + This function causes the system to enter a power state equivalent
> + to the ACPI G2/S5 or G3 states.
>
> - @param ImageHandle The firmware allocated handle for the EFI image.
> - @param SystemTable A pointer to the EFI System Table.
> + If this function returns, it means that the system does not support shut down
> + reset.
> +**/
> +VOID
> +EFIAPI
> +ResetShutdown (
> + VOID
> + )
> +{
> + // not implemented
> +}
> +
> +/**
> + This function causes the system to enter S3 and then wake up immediately.
>
> - @retval EFI_SUCCESS The constructor always returns EFI_SUCCESS.
> + If this function returns, it means that the system does not support S3
> + feature.
> +**/
> +VOID
> +EFIAPI
> +EnterS3WithImmediateWake (
> + VOID
> + )
> +{
> + // not implemented
> +}
> +
> +/**
> + This function causes a systemwide reset. The exact type of the reset is
> + defined by the EFI_GUID that follows the Null-terminated Unicode string passed
> + into ResetData. If the platform does not recognize the EFI_GUID in ResetData
> + the platform must pick a supported reset type to perform.The platform may
> + optionally log the parameters from any non-normal reset that occurs.
>
> + @param[in] DataSize The size, in bytes, of ResetData.
> + @param[in] ResetData The data buffer starts with a Null-terminated string,
> + followed by the EFI_GUID.
> **/
> -EFI_STATUS
> +VOID
> EFIAPI
> -LibInitializeResetSystem (
> - IN EFI_HANDLE ImageHandle,
> - IN EFI_SYSTEM_TABLE *SystemTable
> +ResetPlatformSpecific (
> + IN UINTN DataSize,
> + IN VOID *ResetData
> )
> {
> - return EFI_SUCCESS;
> + ResetCold ();
> }
> diff --git a/CadencePkg/Library/CadenceCspResetSystemLib/CadenceCspResetSystemLib.inf b/CadencePkg/Library/CadenceCspResetSystemLib/CadenceCspResetSystemLib.inf
> index 66491ee..949f9e2 100644
> --- a/CadencePkg/Library/CadenceCspResetSystemLib/CadenceCspResetSystemLib.inf
> +++ b/CadencePkg/Library/CadenceCspResetSystemLib/CadenceCspResetSystemLib.inf
> @@ -1,7 +1,7 @@
> #/** @file
> -# Library to support ResetSystem Runtime call.
> +# ResetSystemLib implementation for Cadence CSP.
> #
> -# Copyright (c) 2006, Intel Corporation. All rights reserved.<BR>
> +# Copyright (c) 2008, Apple Inc. All rights reserved.<BR>
> # Copyright (c) 2017, Cadence Design Systems, Inc. All rights reserved.
> #
> # This program and the accompanying materials
> @@ -20,21 +20,20 @@
> FILE_GUID = 4b1bc734-7534-4baa-b33f-7f5caa743996
> MODULE_TYPE = BASE
> VERSION_STRING = 1.0
> - LIBRARY_CLASS = EfiResetSystemLib
> + LIBRARY_CLASS = ResetSystemLib
>
>
> [Sources.common]
> CadenceCspResetSystemLib.c
>
> [Packages]
> - CadencePkg/CadenceCspPkg.dec
> - EmbeddedPkg/EmbeddedPkg.dec
> + ArmPkg/ArmPkg.dec
> + MdeModulePkg/MdeModulePkg.dec
> MdePkg/MdePkg.dec
> + CadencePkg/CadenceCspPkg.dec
>
> [LibraryClasses]
> IoLib
> - DebugLib
> - PcdLib
>
> [FixedPcd]
> gCadenceCspTokenSpaceGuid.PcdCspSysRegBase
> --
> 2.2.2
>
prev parent reply other threads:[~2017-07-31 16:36 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-07-25 16:23 [staging/cadence-aarch64 PATCH] CadencePkg: switch to to generic ResetSystemRuntimeDxe Scott Telford
2017-07-31 16:38 ` Leif Lindholm [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170731163833.GB1501@bivouac.eciton.net \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox