[PATCH 03/12] OvmfPkg/IoMmuDxe: rename HostAddress to CryptedAddress in MAP_INFO

[Laszlo Ersek <lersek@redhat.com>]

As a continuation of the last patch, clarify that the area pointed-to by
"HostAddress" is encrypted and hidden from the hypervisor.

Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
---
 OvmfPkg/IoMmuDxe/AmdSevIoMmu.c | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

diff --git a/OvmfPkg/IoMmuDxe/AmdSevIoMmu.c b/OvmfPkg/IoMmuDxe/AmdSevIoMmu.c
index fcb7bcfaecc2..dfad2cbb569d 100644
--- a/OvmfPkg/IoMmuDxe/AmdSevIoMmu.c
+++ b/OvmfPkg/IoMmuDxe/AmdSevIoMmu.c
@@ -23,40 +23,40 @@
 typedef struct {
   EDKII_IOMMU_OPERATION                     Operation;
   UINTN                                     NumberOfBytes;
   UINTN                                     NumberOfPages;
-  EFI_PHYSICAL_ADDRESS                      HostAddress;
+  EFI_PHYSICAL_ADDRESS                      CryptedAddress;
   EFI_PHYSICAL_ADDRESS                      PlainTextAddress;
 } MAP_INFO;
 
 #define NO_MAPPING             (VOID *) (UINTN) -1
 
 /**
   Provides the controller-specific addresses required to access system memory
   from a DMA bus master. On SEV guest, the DMA operations must be performed on
   shared buffer hence we allocate a bounce buffer to map the HostAddress to a
   DeviceAddress. The Encryption attribute is removed from the DeviceAddress
   buffer.
 
   @param  This                  The protocol instance pointer.
   @param  Operation             Indicates if the bus master is going to read or
                                 write to system memory.
   @param  HostAddress           The system memory address to map to the PCI
                                 controller.
   @param  NumberOfBytes         On input the number of bytes to map. On output
                                 the number of bytes that were mapped.
   @param  DeviceAddress         The resulting map address for the bus master
                                 PCI controller to use to access the hosts
                                 HostAddress.
   @param  Mapping               A resulting value to pass to Unmap().
 
   @retval EFI_SUCCESS           The range was mapped for the returned
                                 NumberOfBytes.
   @retval EFI_UNSUPPORTED       The HostAddress cannot be mapped as a common
                                 buffer.
   @retval EFI_INVALID_PARAMETER One or more parameters are invalid.
   @retval EFI_OUT_OF_RESOURCES  The request could not be completed due to a
                                 lack of resources.
   @retval EFI_DEVICE_ERROR      The system hardware could not map the requested
                                 address.
 
 **/
@@ -65,160 +65,160 @@ EFIAPI
 IoMmuMap (
   IN     EDKII_IOMMU_PROTOCOL                       *This,
   IN     EDKII_IOMMU_OPERATION                      Operation,
   IN     VOID                                       *HostAddress,
   IN OUT UINTN                                      *NumberOfBytes,
   OUT    EFI_PHYSICAL_ADDRESS                       *DeviceAddress,
   OUT    VOID                                       **Mapping
   )
 {
   EFI_STATUS                                        Status;
   EFI_PHYSICAL_ADDRESS                              PhysicalAddress;
   MAP_INFO                                          *MapInfo;
   EFI_PHYSICAL_ADDRESS                              DmaMemoryTop;
   EFI_ALLOCATE_TYPE                                 AllocateType;
 
   if (HostAddress == NULL || NumberOfBytes == NULL || DeviceAddress == NULL ||
       Mapping == NULL) {
     return EFI_INVALID_PARAMETER;
   }
 
   //
   // Make sure that Operation is valid
   //
   if ((UINT32) Operation >= EdkiiIoMmuOperationMaximum) {
     return EFI_INVALID_PARAMETER;
   }
   PhysicalAddress = (EFI_PHYSICAL_ADDRESS) (UINTN) HostAddress;
 
   DmaMemoryTop = (UINTN)-1;
   AllocateType = AllocateAnyPages;
 
   if (((Operation != EdkiiIoMmuOperationBusMasterRead64 &&
         Operation != EdkiiIoMmuOperationBusMasterWrite64 &&
         Operation != EdkiiIoMmuOperationBusMasterCommonBuffer64)) &&
       ((PhysicalAddress + *NumberOfBytes) > SIZE_4GB)) {
     //
     // If the root bridge or the device cannot handle performing DMA above
     // 4GB but any part of the DMA transfer being mapped is above 4GB, then
     // map the DMA transfer to a buffer below 4GB.
     //
     DmaMemoryTop = SIZE_4GB - 1;
     AllocateType = AllocateMaxAddress;
 
     if (Operation == EdkiiIoMmuOperationBusMasterCommonBuffer ||
         Operation == EdkiiIoMmuOperationBusMasterCommonBuffer64) {
         //
         // Common Buffer operations can not be remapped.  If the common buffer
         // if above 4GB, then it is not possible to generate a mapping, so
         // return an error.
         //
         return EFI_UNSUPPORTED;
     }
   }
 
   //
   // CommandBuffer was allocated by us (AllocateBuffer) and is already in
   // unencryted buffer so no need to create bounce buffer
   //
   if (Operation == EdkiiIoMmuOperationBusMasterCommonBuffer ||
       Operation == EdkiiIoMmuOperationBusMasterCommonBuffer64) {
     *Mapping = NO_MAPPING;
     *DeviceAddress = PhysicalAddress;
 
     return EFI_SUCCESS;
   }
 
   //
   // Allocate a MAP_INFO structure to remember the mapping when Unmap() is
   // called later.
   //
   MapInfo = AllocatePool (sizeof (MAP_INFO));
   if (MapInfo == NULL) {
     *NumberOfBytes = 0;
     return EFI_OUT_OF_RESOURCES;
   }
 
   //
   // Initialize the MAP_INFO structure
   //
   MapInfo->Operation         = Operation;
   MapInfo->NumberOfBytes     = *NumberOfBytes;
   MapInfo->NumberOfPages     = EFI_SIZE_TO_PAGES (MapInfo->NumberOfBytes);
-  MapInfo->HostAddress       = PhysicalAddress;
+  MapInfo->CryptedAddress    = PhysicalAddress;
   MapInfo->PlainTextAddress  = DmaMemoryTop;
 
   //
   // Allocate a buffer to map the transfer to.
   //
   Status = gBS->AllocatePages (
                   AllocateType,
                   EfiBootServicesData,
                   MapInfo->NumberOfPages,
                   &MapInfo->PlainTextAddress
                   );
   if (EFI_ERROR (Status)) {
     FreePool (MapInfo);
     *NumberOfBytes = 0;
     return Status;
   }
 
   //
   // Clear the memory encryption mask from the device buffer
   //
   Status = MemEncryptSevClearPageEncMask (
              0,
              MapInfo->PlainTextAddress,
              MapInfo->NumberOfPages,
              TRUE
              );
   ASSERT_EFI_ERROR(Status);
 
   //
   // If this is a read operation from the Bus Master's point of view,
   // then copy the contents of the real buffer into the mapped buffer
   // so the Bus Master can read the contents of the real buffer.
   //
   if (Operation == EdkiiIoMmuOperationBusMasterRead ||
       Operation == EdkiiIoMmuOperationBusMasterRead64) {
     CopyMem (
       (VOID *) (UINTN) MapInfo->PlainTextAddress,
-      (VOID *) (UINTN) MapInfo->HostAddress,
+      (VOID *) (UINTN) MapInfo->CryptedAddress,
       MapInfo->NumberOfBytes
       );
   }
 
   //
   // The DeviceAddress is the address of the maped buffer below 4GB
   //
   *DeviceAddress = MapInfo->PlainTextAddress;
 
   //
   // Return a pointer to the MAP_INFO structure in Mapping
   //
   *Mapping       = MapInfo;
 
   DEBUG ((
     DEBUG_VERBOSE,
-    "%a PlainText 0x%Lx Host 0x%Lx Pages 0x%Lx Bytes 0x%Lx\n",
+    "%a PlainText 0x%Lx Crypted 0x%Lx Pages 0x%Lx Bytes 0x%Lx\n",
     __FUNCTION__,
     MapInfo->PlainTextAddress,
-    MapInfo->HostAddress,
+    MapInfo->CryptedAddress,
     MapInfo->NumberOfPages,
     MapInfo->NumberOfBytes
     ));
 
   return EFI_SUCCESS;
 }
 
 /**
   Completes the Map() operation and releases any corresponding resources.
 
   @param  This                  The protocol instance pointer.
   @param  Mapping               The mapping value returned from Map().
 
   @retval EFI_SUCCESS           The range was unmapped.
   @retval EFI_INVALID_PARAMETER Mapping is not a value that was returned by
                                 Map().
   @retval EFI_DEVICE_ERROR      The data was not committed to the target system
                                 memory.
 **/
@@ -227,87 +227,87 @@ EFIAPI
 IoMmuUnmap (
   IN  EDKII_IOMMU_PROTOCOL                     *This,
   IN  VOID                                     *Mapping
   )
 {
   MAP_INFO                 *MapInfo;
   EFI_STATUS               Status;
 
   if (Mapping == NULL) {
     return EFI_INVALID_PARAMETER;
   }
 
   //
   // See if the Map() operation associated with this Unmap() required a mapping
   // buffer. If a mapping buffer was not required, then this function simply
   // buffer. If a mapping buffer was not required, then this function simply
   //
   if (Mapping == NO_MAPPING) {
     return EFI_SUCCESS;
   }
 
   MapInfo = (MAP_INFO *)Mapping;
 
   //
   // If this is a write operation from the Bus Master's point of view,
   // then copy the contents of the mapped buffer into the real buffer
   // so the processor can read the contents of the real buffer.
   //
   if (MapInfo->Operation == EdkiiIoMmuOperationBusMasterWrite ||
       MapInfo->Operation == EdkiiIoMmuOperationBusMasterWrite64) {
     CopyMem (
-      (VOID *) (UINTN) MapInfo->HostAddress,
+      (VOID *) (UINTN) MapInfo->CryptedAddress,
       (VOID *) (UINTN) MapInfo->PlainTextAddress,
       MapInfo->NumberOfBytes
       );
   }
 
   DEBUG ((
     DEBUG_VERBOSE,
-    "%a PlainText 0x%Lx Host 0x%Lx Pages 0x%Lx Bytes 0x%Lx\n",
+    "%a PlainText 0x%Lx Crypted 0x%Lx Pages 0x%Lx Bytes 0x%Lx\n",
     __FUNCTION__,
     MapInfo->PlainTextAddress,
-    MapInfo->HostAddress,
+    MapInfo->CryptedAddress,
     MapInfo->NumberOfPages,
     MapInfo->NumberOfBytes
     ));
   //
   // Restore the memory encryption mask
   //
   Status = MemEncryptSevSetPageEncMask (
              0,
              MapInfo->PlainTextAddress,
              MapInfo->NumberOfPages,
              TRUE
              );
   ASSERT_EFI_ERROR(Status);
 
   //
   // Free the mapped buffer and the MAP_INFO structure.
   //
   gBS->FreePages (MapInfo->PlainTextAddress, MapInfo->NumberOfPages);
   FreePool (Mapping);
   return EFI_SUCCESS;
 }
 
 /**
   Allocates pages that are suitable for an OperationBusMasterCommonBuffer or
   OperationBusMasterCommonBuffer64 mapping.
 
   @param  This                  The protocol instance pointer.
   @param  Type                  This parameter is not used and must be ignored.
   @param  MemoryType            The type of memory to allocate,
                                 EfiBootServicesData or EfiRuntimeServicesData.
   @param  Pages                 The number of pages to allocate.
   @param  HostAddress           A pointer to store the base system memory
                                 address of the allocated range.
   @param  Attributes            The requested bit mask of attributes for the
                                 allocated range.
 
   @retval EFI_SUCCESS           The requested memory pages were allocated.
   @retval EFI_UNSUPPORTED       Attributes is unsupported. The only legal
                                 attribute bits are MEMORY_WRITE_COMBINE and
                                 MEMORY_CACHED.
   @retval EFI_INVALID_PARAMETER One or more parameters are invalid.
   @retval EFI_OUT_OF_RESOURCES  The memory pages could not be allocated.
 
 **/
-- 
2.13.1.3.g8be5a757fa67