From: songgebird@gmail.com
To: edk2-devel@lists.01.org
Cc: Jordan Justen <jordan.l.justen@intel.com>,
Laszlo Ersek <lersek@redhat.com>,
Ard Biesheuvel <ard.biesheuvel@linaro.org>,
Ge Song <ge.song@hxt-semitech.com>
Subject: [PATCH v3 1/1] OvmfPkg/SecMain: Fix stack switching to permanent memory
Date: Wed, 6 Sep 2017 11:11:35 +0800 [thread overview]
Message-ID: <20170906031135.10358-2-ge.song@hxt-semitech.com> (raw)
In-Reply-To: <20170906031135.10358-1-ge.song@hxt-semitech.com>
From: Ge Song <ge.song@hxt-semitech.com>
In earlier PEI stage, temporary memory at PcdOvmfSecPeiTempRamBase is
employed as stack and heap. We move them to the new room and do some
relocation fixup when permanent memory becomes available.
TemporaryRamMigration() is responsible for switching the stack.
Before entering TemporaryRamMigration(), Ebp/Rbp is populated with the
content of Esp/Rsp and used as frame pointer.
After the execution of SetJump/LongJump, stack migrates to new position
while the context keeps unchanged.
But when TemporaryRamMigration() exits, Esp/Rsp is filled with
the content of Ebp/Rbp to destroy this stack frame.
The result is, stack switches back to previous temporary memory.
When permanent memory becomes available, modules that have registered
themselves for shadowing will be scheduled to execute. Some of them
need to consume more memory(heap/stack). Contrast to temporary stack,
permanent stack possesses larger space.
The potential risk is overflowing the stack if stack staying in
temporary memory. When it happens, system may crash during S3 resume.
More detailed information:
> (gdb) disassemble /r
> Dump of assembler code for function TemporaryRamMigration:
> 0x00000000fffcd29c <+0>: 55 push %rbp
> 0x00000000fffcd29d <+1>: 48 89 e5 mov %rsp,%rbp
> 0x00000000fffcd2a0 <+4>: 48 81 ec 70 01 00 00 sub
> $0x170,%rsp
> ...
> ...
> 0x00000000fffcd425 <+393>: e8 80 10 00 00 callq 0xfffce4aa
> <SaveAndSetDebugTimerInterrupt>
> => 0x00000000fffcd42a <+398>: b8 00 00 00 00 mov $0x0,%eax
> 0x00000000fffcd42f <+403>: c9 leaveq
> 0x00000000fffcd430 <+404>: c3 retq
> End of assembler dump.
See the description of leave(opcode: c9), from
Intel 64 and IA-32 Architectures Software Developer's Manual, Volume 2A
"Releases the stack frame set up by an earlier ENTER instruction. The
LEAVE instruction copies the frame pointer (in the EBP register) into
the stack pointer register (ESP), which releases the stack space
allocated to the stack frame. The old frame pointer (the frame pointer
for the calling procedure that was saved by the ENTER instruction) is
then popped from the stack into the EBP register, restoring the calling
procedure’s stack frame."
To solve this, update Ebp/Rbp too when Esp/Rsp is updated
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ge Song <ge.song@hxt-semitech.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
---
OvmfPkg/Sec/SecMain.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/OvmfPkg/Sec/SecMain.c b/OvmfPkg/Sec/SecMain.c
index e1993ec347b5..f7fec3d8c03b 100644
--- a/OvmfPkg/Sec/SecMain.c
+++ b/OvmfPkg/Sec/SecMain.c
@@ -931,9 +931,11 @@ TemporaryRamMigration (
if (SetJump (&JumpBuffer) == 0) {
#if defined (MDE_CPU_IA32)
JumpBuffer.Esp = JumpBuffer.Esp + DebugAgentContext.StackMigrateOffset;
+ JumpBuffer.Ebp = JumpBuffer.Ebp + DebugAgentContext.StackMigrateOffset;
#endif
#if defined (MDE_CPU_X64)
JumpBuffer.Rsp = JumpBuffer.Rsp + DebugAgentContext.StackMigrateOffset;
+ JumpBuffer.Rbp = JumpBuffer.Rbp + DebugAgentContext.StackMigrateOffset;
#endif
LongJump (&JumpBuffer, (UINTN)-1);
}
--
2.11.0
next prev parent reply other threads:[~2017-09-06 3:08 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-09-06 3:11 [PATCH v3 0/1] OvmfPkg/SecMain: Fix stack switching to permanent memory songgebird
2017-09-06 3:11 ` songgebird [this message]
2017-09-06 3:21 ` [PATCH v3 1/1] " Song, Ge
[not found] ` <a3038310ed1c46f5bdacfda2050cb1f8@HXTBJIDCEMVIW01.hxtcorp.net>
2017-09-06 17:20 ` Jordan Justen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170906031135.10358-2-ge.song@hxt-semitech.com \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox