From: Leif Lindholm <leif.lindholm@linaro.org>
To: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: edk2-devel@lists.01.org, methavanitpong.pipat@socionext.com,
masahisa.kojima@linaro.org, masami.hiramatsu@linaro.org
Subject: Re: [PATCH edk2-platforms 06/14] Silicon/Synquacer: implement EFI_CPU_IO2_PROTOCOL
Date: Mon, 11 Sep 2017 15:45:11 +0100 [thread overview]
Message-ID: <20170911144511.b57fxc4nr3gfspgb@bivouac.eciton.net> (raw)
In-Reply-To: <20170908182315.9591-7-ard.biesheuvel@linaro.org>
On Fri, Sep 08, 2017 at 07:23:07PM +0100, Ard Biesheuvel wrote:
> The Synquacer SOC has two separate PCIe RCs, which means there is
> no single value for the translation offset between I/O port accesses
> and MMIO accesses. So add a special implementation of EFI_CPU_IO2_PROTOCOL
> that takes the two disjoint I/O windows into account.
>
> Contributed-under: TianoCore Contribution Agreement 1.1
> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
> ---
> Silicon/Socionext/Synquacer/Drivers/SynquacerPciCpuIo2dxe/SynquacerPciCpuIo2Dxe.c | 588 ++++++++++++++++++++
> Silicon/Socionext/Synquacer/Drivers/SynquacerPciCpuIo2dxe/SynquacerPciCpuIo2Dxe.inf | 50 ++
> 2 files changed, 638 insertions(+)
>
> diff --git a/Silicon/Socionext/Synquacer/Drivers/SynquacerPciCpuIo2dxe/SynquacerPciCpuIo2Dxe.c b/Silicon/Socionext/Synquacer/Drivers/SynquacerPciCpuIo2dxe/SynquacerPciCpuIo2Dxe.c
> new file mode 100644
> index 000000000000..8591a251aea3
> --- /dev/null
> +++ b/Silicon/Socionext/Synquacer/Drivers/SynquacerPciCpuIo2dxe/SynquacerPciCpuIo2Dxe.c
> @@ -0,0 +1,588 @@
> +/** @file
> + Produces the CPU I/O 2 Protocol.
> +
> +Copyright (c) 2009 - 2012, Intel Corporation. All rights reserved.<BR>
> +Copyright (c) 2016 - 2017, Linaro Ltd. All rights reserved.<BR>
> +
> +This program and the accompanying materials
> +are licensed and made available under the terms and conditions of the BSD License
> +which accompanies this distribution. The full text of the license may be found at
> +http://opensource.org/licenses/bsd-license.php
> +
> +THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> +WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
> +
> +**/
> +
> +#include <PiDxe.h>
> +
> +#include <Platform/Pcie.h>
> +#include <Protocol/CpuIo2.h>
> +
> +#include <Library/BaseLib.h>
> +#include <Library/DebugLib.h>
> +#include <Library/IoLib.h>
> +#include <Library/PcdLib.h>
> +#include <Library/UefiBootServicesTableLib.h>
> +
> +#define MAX_IO_PORT_ADDRESS SYNQUACER_PCI_SEG1_PORTIO_MAX
> +
> +//
> +// Handle for the CPU I/O 2 Protocol
> +//
> +STATIC EFI_HANDLE mHandle = NULL;
> +
> +//
> +// Lookup table for increment values based on transfer widths
> +//
> +STATIC CONST UINT8 mInStride[] = {
> + 1, // EfiCpuIoWidthUint8
> + 2, // EfiCpuIoWidthUint16
> + 4, // EfiCpuIoWidthUint32
> + 8, // EfiCpuIoWidthUint64
> + 0, // EfiCpuIoWidthFifoUint8
> + 0, // EfiCpuIoWidthFifoUint16
> + 0, // EfiCpuIoWidthFifoUint32
> + 0, // EfiCpuIoWidthFifoUint64
> + 1, // EfiCpuIoWidthFillUint8
> + 2, // EfiCpuIoWidthFillUint16
> + 4, // EfiCpuIoWidthFillUint32
> + 8 // EfiCpuIoWidthFillUint64
> +};
> +
> +//
> +// Lookup table for increment values based on transfer widths
> +//
> +STATIC CONST UINT8 mOutStride[] = {
> + 1, // EfiCpuIoWidthUint8
> + 2, // EfiCpuIoWidthUint16
> + 4, // EfiCpuIoWidthUint32
> + 8, // EfiCpuIoWidthUint64
> + 1, // EfiCpuIoWidthFifoUint8
> + 2, // EfiCpuIoWidthFifoUint16
> + 4, // EfiCpuIoWidthFifoUint32
> + 8, // EfiCpuIoWidthFifoUint64
> + 0, // EfiCpuIoWidthFillUint8
> + 0, // EfiCpuIoWidthFillUint16
> + 0, // EfiCpuIoWidthFillUint32
> + 0 // EfiCpuIoWidthFillUint64
> +};
> +
> +/**
> + Check parameters to a CPU I/O 2 Protocol service request.
> +
> + The I/O operations are carried out exactly as requested. The caller is responsible
> + for satisfying any alignment and I/O width restrictions that a PI System on a
> + platform might require. For example on some platforms, width requests of
> + EfiCpuIoWidthUint64 do not work. Misaligned buffers, on the other hand, will
> + be handled by the driver.
> +
> + @param[in] MmioOperation TRUE for an MMIO operation, FALSE for I/O Port operation.
> + @param[in] Width Signifies the width of the I/O or Memory operation.
> + @param[in] Address The base address of the I/O operation.
> + @param[in] Count The number of I/O operations to perform. The number of
> + bytes moved is Width size * Count, starting at Address.
> + @param[in] Buffer For read operations, the destination buffer to store the results.
> + For write operations, the source buffer from which to write data.
> +
> + @retval EFI_SUCCESS The parameters for this request pass the checks.
> + @retval EFI_INVALID_PARAMETER Width is invalid for this PI system.
> + @retval EFI_INVALID_PARAMETER Buffer is NULL.
> + @retval EFI_UNSUPPORTED The Buffer is not aligned for the given Width.
> + @retval EFI_UNSUPPORTED The address range specified by Address, Width,
> + and Count is not valid for this PI system.
> +
> +**/
> +STATIC
> +EFI_STATUS
> +CpuIoCheckParameter (
> + IN BOOLEAN MmioOperation,
> + IN EFI_CPU_IO_PROTOCOL_WIDTH Width,
> + IN UINT64 Address,
> + IN UINTN Count,
> + IN VOID *Buffer
> + )
> +{
> + UINT64 MaxCount;
> + UINT64 Limit;
> +
> + //
> + // Check to see if Buffer is NULL
> + //
> + if (Buffer == NULL) {
> + ASSERT (FALSE);
> + return EFI_INVALID_PARAMETER;
> + }
> +
> + //
> + // Check to see if Width is in the valid range
> + //
> + if ((UINT32)Width >= EfiCpuIoWidthMaximum) {
> + ASSERT (FALSE);
> + return EFI_INVALID_PARAMETER;
> + }
> +
> + //
> + // For FIFO type, the target address won't increase during the access,
> + // so treat Count as 1
> + //
> + if (Width >= EfiCpuIoWidthFifoUint8 && Width <= EfiCpuIoWidthFifoUint64) {
> + Count = 1;
> + }
> +
> + //
> + // Check to see if Width is in the valid range for I/O Port operations
> + //
> + Width = (EFI_CPU_IO_PROTOCOL_WIDTH) (Width & 0x03);
No space before (Width?
> + if (!MmioOperation && (Width == EfiCpuIoWidthUint64)) {
> + ASSERT (FALSE);
> + return EFI_INVALID_PARAMETER;
> + }
> +
> + //
> + // Check to see if Address is aligned
> + //
> + if ((Address & (UINT64)(mInStride[Width] - 1)) != 0) {
> + ASSERT (FALSE);
> + return EFI_UNSUPPORTED;
> + }
> +
> + //
> + // Check to see if any address associated with this transfer exceeds the maximum
> + // allowed address. The maximum address implied by the parameters passed in is
> + // Address + Size * Count. If the following condition is met, then the transfer
> + // is not supported.
> + //
> + // Address + Size * Count > (MmioOperation ? MAX_ADDRESS : MAX_IO_PORT_ADDRESS) + 1
> + //
> + // Since MAX_ADDRESS can be the maximum integer value supported by the CPU and Count
> + // can also be the maximum integer value supported by the CPU, this range
> + // check must be adjusted to avoid all oveflow conditions.
> + //
> + // The following form of the range check is equivalent but assumes that
> + // MAX_ADDRESS and MAX_IO_PORT_ADDRESS are of the form (2^n - 1).
> + //
> + Limit = (MmioOperation ? MAX_ADDRESS : MAX_IO_PORT_ADDRESS);
> + if (Count == 0) {
> + if (Address > Limit) {
> + ASSERT (FALSE);
> + return EFI_UNSUPPORTED;
> + }
> + } else {
> + MaxCount = RShiftU64 (Limit, Width);
> + if (MaxCount < (Count - 1)) {
> + ASSERT (FALSE);
> + return EFI_UNSUPPORTED;
> + }
> + if (Address > LShiftU64 (MaxCount - Count + 1, Width)) {
> + ASSERT (FALSE);
> + return EFI_UNSUPPORTED;
> + }
> + }
> +
> + //
> + // Check to see if Buffer is aligned
> + //
> + if (((UINTN)Buffer & ((MIN (sizeof (UINTN), mInStride[Width]) - 1))) != 0) {
> + ASSERT (FALSE);
> + return EFI_UNSUPPORTED;
> + }
> +
> + return EFI_SUCCESS;
> +}
> +
> +/**
> + Reads memory-mapped registers.
> +
> + The I/O operations are carried out exactly as requested. The caller is responsible
> + for satisfying any alignment and I/O width restrictions that a PI System on a
> + platform might require. For example on some platforms, width requests of
> + EfiCpuIoWidthUint64 do not work. Misaligned buffers, on the other hand, will
> + be handled by the driver.
> +
> + If Width is EfiCpuIoWidthUint8, EfiCpuIoWidthUint16, EfiCpuIoWidthUint32,
> + or EfiCpuIoWidthUint64, then both Address and Buffer are incremented for
> + each of the Count operations that is performed.
> +
> + If Width is EfiCpuIoWidthFifoUint8, EfiCpuIoWidthFifoUint16,
> + EfiCpuIoWidthFifoUint32, or EfiCpuIoWidthFifoUint64, then only Buffer is
> + incremented for each of the Count operations that is performed. The read or
> + write operation is performed Count times on the same Address.
> +
> + If Width is EfiCpuIoWidthFillUint8, EfiCpuIoWidthFillUint16,
> + EfiCpuIoWidthFillUint32, or EfiCpuIoWidthFillUint64, then only Address is
> + incremented for each of the Count operations that is performed. The read or
> + write operation is performed Count times from the first element of Buffer.
> +
> + @param[in] This A pointer to the EFI_CPU_IO2_PROTOCOL instance.
> + @param[in] Width Signifies the width of the I/O or Memory operation.
> + @param[in] Address The base address of the I/O operation.
> + @param[in] Count The number of I/O operations to perform. The number of
> + bytes moved is Width size * Count, starting at Address.
> + @param[out] Buffer For read operations, the destination buffer to store the results.
> + For write operations, the source buffer from which to write data.
> +
> + @retval EFI_SUCCESS The data was read from or written to the PI system.
> + @retval EFI_INVALID_PARAMETER Width is invalid for this PI system.
> + @retval EFI_INVALID_PARAMETER Buffer is NULL.
> + @retval EFI_UNSUPPORTED The Buffer is not aligned for the given Width.
> + @retval EFI_UNSUPPORTED The address range specified by Address, Width,
> + and Count is not valid for this PI system.
> +
> +**/
> +STATIC
> +EFI_STATUS
> +EFIAPI
> +CpuMemoryServiceRead (
> + IN EFI_CPU_IO2_PROTOCOL *This,
> + IN EFI_CPU_IO_PROTOCOL_WIDTH Width,
> + IN UINT64 Address,
> + IN UINTN Count,
> + OUT VOID *Buffer
> + )
> +{
> + EFI_STATUS Status;
> + UINT8 InStride;
> + UINT8 OutStride;
> + EFI_CPU_IO_PROTOCOL_WIDTH OperationWidth;
> + UINT8 *Uint8Buffer;
I know this is arguably just a question of preference (and taken from
the template), but why not VOID * and BufferPointer (or something)?
Casts to UINT8 * tingle my spidey sense.
> +
> + Status = CpuIoCheckParameter (TRUE, Width, Address, Count, Buffer);
> + if (EFI_ERROR (Status)) {
> + return Status;
> + }
> +
> + //
> + // Select loop based on the width of the transfer
> + //
> + InStride = mInStride[Width];
> + OutStride = mOutStride[Width];
> + OperationWidth = (EFI_CPU_IO_PROTOCOL_WIDTH) (Width & 0x03);
> + for (Uint8Buffer = Buffer; Count > 0; Address += InStride, Uint8Buffer += OutStride, Count--) {
> + if (OperationWidth == EfiCpuIoWidthUint8) {
> + *Uint8Buffer = MmioRead8 ((UINTN)Address);
Obviously a *((UINT8 *) would be needed.
> + } else if (OperationWidth == EfiCpuIoWidthUint16) {
> + *((UINT16 *)Uint8Buffer) = MmioRead16 ((UINTN)Address);
> + } else if (OperationWidth == EfiCpuIoWidthUint32) {
> + *((UINT32 *)Uint8Buffer) = MmioRead32 ((UINTN)Address);
> + } else if (OperationWidth == EfiCpuIoWidthUint64) {
> + *((UINT64 *)Uint8Buffer) = MmioRead64 ((UINTN)Address);
> + }
> + }
> + return EFI_SUCCESS;
> +}
> +
> +/**
> + Writes memory-mapped registers.
> +
> + The I/O operations are carried out exactly as requested. The caller is responsible
> + for satisfying any alignment and I/O width restrictions that a PI System on a
> + platform might require. For example on some platforms, width requests of
> + EfiCpuIoWidthUint64 do not work. Misaligned buffers, on the other hand, will
> + be handled by the driver.
> +
> + If Width is EfiCpuIoWidthUint8, EfiCpuIoWidthUint16, EfiCpuIoWidthUint32,
> + or EfiCpuIoWidthUint64, then both Address and Buffer are incremented for
> + each of the Count operations that is performed.
> +
> + If Width is EfiCpuIoWidthFifoUint8, EfiCpuIoWidthFifoUint16,
> + EfiCpuIoWidthFifoUint32, or EfiCpuIoWidthFifoUint64, then only Buffer is
> + incremented for each of the Count operations that is performed. The read or
> + write operation is performed Count times on the same Address.
> +
> + If Width is EfiCpuIoWidthFillUint8, EfiCpuIoWidthFillUint16,
> + EfiCpuIoWidthFillUint32, or EfiCpuIoWidthFillUint64, then only Address is
> + incremented for each of the Count operations that is performed. The read or
> + write operation is performed Count times from the first element of Buffer.
> +
> + @param[in] This A pointer to the EFI_CPU_IO2_PROTOCOL instance.
> + @param[in] Width Signifies the width of the I/O or Memory operation.
> + @param[in] Address The base address of the I/O operation.
> + @param[in] Count The number of I/O operations to perform. The number of
> + bytes moved is Width size * Count, starting at Address.
> + @param[in] Buffer For read operations, the destination buffer to store the results.
> + For write operations, the source buffer from which to write data.
> +
> + @retval EFI_SUCCESS The data was read from or written to the PI system.
> + @retval EFI_INVALID_PARAMETER Width is invalid for this PI system.
> + @retval EFI_INVALID_PARAMETER Buffer is NULL.
> + @retval EFI_UNSUPPORTED The Buffer is not aligned for the given Width.
> + @retval EFI_UNSUPPORTED The address range specified by Address, Width,
> + and Count is not valid for this PI system.
> +
> +**/
> +STATIC
> +EFI_STATUS
> +EFIAPI
> +CpuMemoryServiceWrite (
> + IN EFI_CPU_IO2_PROTOCOL *This,
> + IN EFI_CPU_IO_PROTOCOL_WIDTH Width,
> + IN UINT64 Address,
> + IN UINTN Count,
> + IN VOID *Buffer
> + )
> +{
> + EFI_STATUS Status;
> + UINT8 InStride;
> + UINT8 OutStride;
> + EFI_CPU_IO_PROTOCOL_WIDTH OperationWidth;
> + UINT8 *Uint8Buffer;
Same comment.
> +
> + Status = CpuIoCheckParameter (TRUE, Width, Address, Count, Buffer);
> + if (EFI_ERROR (Status)) {
> + return Status;
> + }
> +
> + //
> + // Select loop based on the width of the transfer
> + //
> + InStride = mInStride[Width];
> + OutStride = mOutStride[Width];
> + OperationWidth = (EFI_CPU_IO_PROTOCOL_WIDTH) (Width & 0x03);
> + for (Uint8Buffer = Buffer; Count > 0; Address += InStride, Uint8Buffer += OutStride, Count--) {
> + if (OperationWidth == EfiCpuIoWidthUint8) {
> + MmioWrite8 ((UINTN)Address, *Uint8Buffer);
> + } else if (OperationWidth == EfiCpuIoWidthUint16) {
> + MmioWrite16 ((UINTN)Address, *((UINT16 *)Uint8Buffer));
> + } else if (OperationWidth == EfiCpuIoWidthUint32) {
> + MmioWrite32 ((UINTN)Address, *((UINT32 *)Uint8Buffer));
> + } else if (OperationWidth == EfiCpuIoWidthUint64) {
> + MmioWrite64 ((UINTN)Address, *((UINT64 *)Uint8Buffer));
> + }
> + }
> + return EFI_SUCCESS;
> +}
> +
> +/**
> + Reads I/O registers.
> +
> + The I/O operations are carried out exactly as requested. The caller is responsible
> + for satisfying any alignment and I/O width restrictions that a PI System on a
> + platform might require. For example on some platforms, width requests of
> + EfiCpuIoWidthUint64 do not work. Misaligned buffers, on the other hand, will
> + be handled by the driver.
> +
> + If Width is EfiCpuIoWidthUint8, EfiCpuIoWidthUint16, EfiCpuIoWidthUint32,
> + or EfiCpuIoWidthUint64, then both Address and Buffer are incremented for
> + each of the Count operations that is performed.
> +
> + If Width is EfiCpuIoWidthFifoUint8, EfiCpuIoWidthFifoUint16,
> + EfiCpuIoWidthFifoUint32, or EfiCpuIoWidthFifoUint64, then only Buffer is
> + incremented for each of the Count operations that is performed. The read or
> + write operation is performed Count times on the same Address.
> +
> + If Width is EfiCpuIoWidthFillUint8, EfiCpuIoWidthFillUint16,
> + EfiCpuIoWidthFillUint32, or EfiCpuIoWidthFillUint64, then only Address is
> + incremented for each of the Count operations that is performed. The read or
> + write operation is performed Count times from the first element of Buffer.
> +
> + @param[in] This A pointer to the EFI_CPU_IO2_PROTOCOL instance.
> + @param[in] Width Signifies the width of the I/O or Memory operation.
> + @param[in] Address The base address of the I/O operation.
> + @param[in] Count The number of I/O operations to perform. The number of
> + bytes moved is Width size * Count, starting at Address.
> + @param[out] Buffer For read operations, the destination buffer to store the results.
> + For write operations, the source buffer from which to write data.
> +
> + @retval EFI_SUCCESS The data was read from or written to the PI system.
> + @retval EFI_INVALID_PARAMETER Width is invalid for this PI system.
> + @retval EFI_INVALID_PARAMETER Buffer is NULL.
> + @retval EFI_UNSUPPORTED The Buffer is not aligned for the given Width.
> + @retval EFI_UNSUPPORTED The address range specified by Address, Width,
> + and Count is not valid for this PI system.
> +
> +**/
> +STATIC
> +EFI_STATUS
> +EFIAPI
> +CpuIoServiceRead (
> + IN EFI_CPU_IO2_PROTOCOL *This,
> + IN EFI_CPU_IO_PROTOCOL_WIDTH Width,
> + IN UINT64 Address,
> + IN UINTN Count,
> + OUT VOID *Buffer
> + )
> +{
> + EFI_STATUS Status;
> + UINT8 InStride;
> + UINT8 OutStride;
> + EFI_CPU_IO_PROTOCOL_WIDTH OperationWidth;
> + UINT8 *Uint8Buffer;
Same comment.
> +
> + Status = CpuIoCheckParameter (FALSE, Width, Address, Count, Buffer);
> + if (EFI_ERROR (Status)) {
> + return Status;
> + }
> +
> + switch (Address) {
> + case SYNQUACER_PCI_SEG0_PORTIO_MIN ... SYNQUACER_PCI_SEG0_PORTIO_MAX:
Is the '...' extension permitted?
This wouldn't look horrifically worse as an if ... else if .. else,
and it would be portable.
> + Address += SYNQUACER_PCI_SEG0_PORTIO_MEMBASE;
> + break;
> + case SYNQUACER_PCI_SEG1_PORTIO_MIN ... SYNQUACER_PCI_SEG1_PORTIO_MAX:
> + Address += SYNQUACER_PCI_SEG1_PORTIO_MEMBASE;
> + break;
> + default:
> + ASSERT (FALSE);
> + return EFI_INVALID_PARAMETER;
> + }
> +
> + //
> + // Select loop based on the width of the transfer
> + //
> + InStride = mInStride[Width];
> + OutStride = mOutStride[Width];
> + OperationWidth = (EFI_CPU_IO_PROTOCOL_WIDTH) (Width & 0x03);
Drop space before (Width?
> +
> + for (Uint8Buffer = Buffer; Count > 0; Address += InStride, Uint8Buffer += OutStride, Count--) {
> + if (OperationWidth == EfiCpuIoWidthUint8) {
> + *Uint8Buffer = MmioRead8 ((UINTN)Address);
> + } else if (OperationWidth == EfiCpuIoWidthUint16) {
> + *((UINT16 *)Uint8Buffer) = MmioRead16 ((UINTN)Address);
> + } else if (OperationWidth == EfiCpuIoWidthUint32) {
> + *((UINT32 *)Uint8Buffer) = MmioRead32 ((UINTN)Address);
> + }
> + }
> +
> + return EFI_SUCCESS;
> +}
> +
> +/**
> + Write I/O registers.
> +
> + The I/O operations are carried out exactly as requested. The caller is responsible
> + for satisfying any alignment and I/O width restrictions that a PI System on a
> + platform might require. For example on some platforms, width requests of
> + EfiCpuIoWidthUint64 do not work. Misaligned buffers, on the other hand, will
> + be handled by the driver.
> +
> + If Width is EfiCpuIoWidthUint8, EfiCpuIoWidthUint16, EfiCpuIoWidthUint32,
> + or EfiCpuIoWidthUint64, then both Address and Buffer are incremented for
> + each of the Count operations that is performed.
> +
> + If Width is EfiCpuIoWidthFifoUint8, EfiCpuIoWidthFifoUint16,
> + EfiCpuIoWidthFifoUint32, or EfiCpuIoWidthFifoUint64, then only Buffer is
> + incremented for each of the Count operations that is performed. The read or
> + write operation is performed Count times on the same Address.
> +
> + If Width is EfiCpuIoWidthFillUint8, EfiCpuIoWidthFillUint16,
> + EfiCpuIoWidthFillUint32, or EfiCpuIoWidthFillUint64, then only Address is
> + incremented for each of the Count operations that is performed. The read or
> + write operation is performed Count times from the first element of Buffer.
> +
> + @param[in] This A pointer to the EFI_CPU_IO2_PROTOCOL instance.
> + @param[in] Width Signifies the width of the I/O or Memory operation.
> + @param[in] Address The base address of the I/O operation.
> + @param[in] Count The number of I/O operations to perform. The number of
> + bytes moved is Width size * Count, starting at Address.
> + @param[in] Buffer For read operations, the destination buffer to store the results.
> + For write operations, the source buffer from which to write data.
> +
> + @retval EFI_SUCCESS The data was read from or written to the PI system.
> + @retval EFI_INVALID_PARAMETER Width is invalid for this PI system.
> + @retval EFI_INVALID_PARAMETER Buffer is NULL.
> + @retval EFI_UNSUPPORTED The Buffer is not aligned for the given Width.
> + @retval EFI_UNSUPPORTED The address range specified by Address, Width,
> + and Count is not valid for this PI system.
> +
> +**/
> +STATIC
> +EFI_STATUS
> +EFIAPI
> +CpuIoServiceWrite (
> + IN EFI_CPU_IO2_PROTOCOL *This,
> + IN EFI_CPU_IO_PROTOCOL_WIDTH Width,
> + IN UINT64 Address,
> + IN UINTN Count,
> + IN VOID *Buffer
> + )
> +{
> + EFI_STATUS Status;
> + UINT8 InStride;
> + UINT8 OutStride;
> + EFI_CPU_IO_PROTOCOL_WIDTH OperationWidth;
> + UINT8 *Uint8Buffer;
Same comment?
> +
> + //
> + // Make sure the parameters are valid
> + //
> + Status = CpuIoCheckParameter (FALSE, Width, Address, Count, Buffer);
> + if (EFI_ERROR (Status)) {
> + return Status;
> + }
> +
> + switch (Address) {
> + case SYNQUACER_PCI_SEG0_PORTIO_MIN ... SYNQUACER_PCI_SEG0_PORTIO_MAX:
Same comment.
> + Address += SYNQUACER_PCI_SEG0_PORTIO_MEMBASE;
> + break;
> + case SYNQUACER_PCI_SEG1_PORTIO_MIN ... SYNQUACER_PCI_SEG1_PORTIO_MAX:
> + Address += SYNQUACER_PCI_SEG1_PORTIO_MEMBASE;
> + break;
> + default:
> + ASSERT (FALSE);
> + return EFI_INVALID_PARAMETER;
> + }
> +
> + //
> + // Select loop based on the width of the transfer
> + //
> + InStride = mInStride[Width];
> + OutStride = mOutStride[Width];
> + OperationWidth = (EFI_CPU_IO_PROTOCOL_WIDTH) (Width & 0x03);
Drop space before (Width?
> +
> + for (Uint8Buffer = (UINT8 *)Buffer; Count > 0; Address += InStride, Uint8Buffer += OutStride, Count--) {
> + if (OperationWidth == EfiCpuIoWidthUint8) {
> + MmioWrite8 ((UINTN)Address, *Uint8Buffer);
> + } else if (OperationWidth == EfiCpuIoWidthUint16) {
> + MmioWrite16 ((UINTN)Address, *((UINT16 *)Uint8Buffer));
> + } else if (OperationWidth == EfiCpuIoWidthUint32) {
> + MmioWrite32 ((UINTN)Address, *((UINT32 *)Uint8Buffer));
> + }
> + }
> +
> + return EFI_SUCCESS;
> +}
> +
> +//
> +// CPU I/O 2 Protocol instance
> +//
> +STATIC EFI_CPU_IO2_PROTOCOL mCpuIo2 = {
> + {
> + CpuMemoryServiceRead,
> + CpuMemoryServiceWrite
> + },
> + {
> + CpuIoServiceRead,
> + CpuIoServiceWrite
> + }
> +};
> +
> +
> +/**
> + The user Entry Point for module CpuIo2Dxe. The user code starts with this function.
> +
> + @param[in] ImageHandle The firmware allocated handle for the EFI image.
> + @param[in] SystemTable A pointer to the EFI System Table.
> +
> + @retval EFI_SUCCESS The entry point is executed successfully.
> + @retval other Some error occurs when executing this entry point.
> +
> +**/
> +EFI_STATUS
> +EFIAPI
> +SynquacerPciCpuIo2Initialize (
> + IN EFI_HANDLE ImageHandle,
> + IN EFI_SYSTEM_TABLE *SystemTable
> + )
> +{
> + EFI_STATUS Status;
> +
> + ASSERT_PROTOCOL_ALREADY_INSTALLED (NULL, &gEfiCpuIo2ProtocolGuid);
> + Status = gBS->InstallMultipleProtocolInterfaces (
> + &mHandle,
> + &gEfiCpuIo2ProtocolGuid, &mCpuIo2,
> + NULL
> + );
> + ASSERT_EFI_ERROR (Status);
> +
> + return Status;
> +}
> diff --git a/Silicon/Socionext/Synquacer/Drivers/SynquacerPciCpuIo2dxe/SynquacerPciCpuIo2Dxe.inf b/Silicon/Socionext/Synquacer/Drivers/SynquacerPciCpuIo2dxe/SynquacerPciCpuIo2Dxe.inf
> new file mode 100644
> index 000000000000..8b56561f029d
> --- /dev/null
> +++ b/Silicon/Socionext/Synquacer/Drivers/SynquacerPciCpuIo2dxe/SynquacerPciCpuIo2Dxe.inf
> @@ -0,0 +1,50 @@
> +## @file
> +# Produces the CPU I/O 2 Protocol by using the services of the I/O Library.
> +#
> +# Copyright (c) 2009 - 2014, Intel Corporation. All rights reserved.<BR>
> +# Copyright (c) 2016 - 2017, Linaro Ltd. All rights reserved.<BR>
> +#
> +# This program and the accompanying materials
> +# are licensed and made available under the terms and conditions of the BSD License
> +# which accompanies this distribution. The full text of the license may be found at
> +# http://opensource.org/licenses/bsd-license.php
> +#
> +# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> +# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
> +#
> +##
> +
> +[Defines]
> + INF_VERSION = 0x00010005
Bump.
> + BASE_NAME = SynquacerPciCpuIo2Dxe
> + FILE_GUID = cee8beea-507a-49f4-a3d7-d1100a2008cc
> + MODULE_TYPE = DXE_DRIVER
> + VERSION_STRING = 1.0
> + ENTRY_POINT = SynquacerPciCpuIo2Initialize
> +
> +#
> +# The following information is for reference only and not required by the build tools.
> +#
> +# VALID_ARCHITECTURES = ARM AARCH64
> +#
> +
> +[Sources]
> + SynquacerPciCpuIo2Dxe.c
> +
> +[Packages]
> + MdePkg/MdePkg.dec
> + Silicon/Socionext/Synquacer/Synquacer.dec
> +
> +[LibraryClasses]
> + UefiDriverEntryPoint
> + BaseLib
> + DebugLib
> + IoLib
> + PcdLib
> + UefiBootServicesTableLib
Sort, please?
/
Leif
> +
> +[Protocols]
> + gEfiCpuIo2ProtocolGuid ## PRODUCES
> +
> +[Depex]
> + TRUE
> --
> 2.11.0
>
next prev parent reply other threads:[~2017-09-11 14:42 UTC|newest]
Thread overview: 33+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-09-08 18:23 [PATCH edk2-platforms 00/14] add support for Socionext Synquacer EVB Ard Biesheuvel
2017-09-08 18:23 ` [PATCH edk2-platforms 01/14] Silicon/Synquacer: add package with platform headers Ard Biesheuvel
2017-09-11 13:31 ` Leif Lindholm
2017-09-08 18:23 ` [PATCH edk2-platforms 02/14] Silicon/Synquacer: add MemoryInitPeiLib implementation Ard Biesheuvel
2017-09-11 13:36 ` Leif Lindholm
2017-09-08 18:23 ` [PATCH edk2-platforms 03/14] Platform: add support for Socionext Synquacer eval board Ard Biesheuvel
2017-09-11 13:54 ` Leif Lindholm
2017-09-08 18:23 ` [PATCH edk2-platforms 04/14] Silicon/Synquacer: implement PciSegmentLib to support dual RCs Ard Biesheuvel
2017-09-11 14:03 ` Leif Lindholm
2017-09-08 18:23 ` [PATCH edk2-platforms 05/14] Silicon/Synquacer: implement PciHostBridgeLib support Ard Biesheuvel
2017-09-11 14:22 ` Leif Lindholm
2017-09-08 18:23 ` [PATCH edk2-platforms 06/14] Silicon/Synquacer: implement EFI_CPU_IO2_PROTOCOL Ard Biesheuvel
2017-09-11 14:45 ` Leif Lindholm [this message]
2017-09-08 18:23 ` [PATCH edk2-platforms 07/14] Platform/SynquacerEvalBoard: add PCI support Ard Biesheuvel
2017-09-11 14:48 ` Leif Lindholm
2017-09-08 18:23 ` [PATCH edk2-platforms 08/14] Silicon/Socionext: add driver for NETSEC network controller Ard Biesheuvel
2017-09-11 16:12 ` Leif Lindholm
2017-10-28 13:06 ` Ard Biesheuvel
2017-10-28 21:25 ` Leif Lindholm
2017-09-08 18:23 ` [PATCH edk2-platforms 09/14] Platform/SynquacerEvalBoard: add NETSEC driver Ard Biesheuvel
2017-09-11 16:23 ` Leif Lindholm
2017-09-08 18:23 ` [PATCH edk2-platforms 10/14] Silicon/Synquacer: add ACPI support Ard Biesheuvel
2017-09-11 16:33 ` Leif Lindholm
2017-09-08 18:23 ` [PATCH edk2-platforms 11/14] Silicon/Synquacer: add device tree support for eval board Ard Biesheuvel
2017-09-11 16:37 ` Leif Lindholm
2017-09-08 18:23 ` [PATCH edk2-platforms 12/14] Silicon/Synquacer: add NorFlashPlatformLib implementation Ard Biesheuvel
2017-09-11 16:38 ` Leif Lindholm
2017-09-08 18:23 ` [PATCH edk2-platforms 13/14] Silicon/Socionext: add driver for SPI NOR flash Ard Biesheuvel
2017-09-11 19:13 ` Leif Lindholm
[not found] ` <e55ff6c595f74189bd53787f3b6b2283@SOC-EX03V.e01.socionext.com>
2017-09-12 8:38 ` Leif Lindholm
2017-09-12 10:48 ` methavanitpong.pipat
2017-09-08 18:23 ` [PATCH edk2-platforms 14/14] Platform/Synquacer: incorporate NOR flash and variable drivers Ard Biesheuvel
2017-09-11 19:13 ` Leif Lindholm
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170911144511.b57fxc4nr3gfspgb@bivouac.eciton.net \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox