From: Achin Gupta <achin.gupta@arm.com>
To: Ard Biesheuvel <ard.biesheuvel@linaro.org>,
Supreeth Venkatesh <Supreeth.Venkatesh@arm.com>
Cc: Supreeth Venkatesh <supreeth.venkatesh@arm.com>,
"edk2-devel@lists.01.org" <edk2-devel@lists.01.org>,
Leif Lindholm <leif.lindholm@linaro.org>,
nd@arm.com
Subject: Re: [PATCH v2 1/2] ArmPkg/Include: Add standard SMC function IDs for MM interface.
Date: Mon, 9 Oct 2017 09:52:03 +0100 [thread overview]
Message-ID: <20171009085202.GW26498@e104320-lin> (raw)
In-Reply-To: <CAKv+Gu_VqCPuhg7TKxbbsbEF+fvFNOYz8NWm4JOrVLDrthxSVA@mail.gmail.com>
Hi Ard/Supreeth,
On Fri, Oct 06, 2017 at 10:05:46PM +0100, Ard Biesheuvel wrote:
> On 27 September 2017 at 19:58, Supreeth Venkatesh
> <supreeth.venkatesh@arm.com> wrote:
> > This patch adds a list of function IDs that fall under the standard
> > SMC range as defined in
> > http://infocenter.arm.com/help/topic/com.arm.doc.den0060a/DEN0060A_ARM_MM_Interface_Specification.pdf.
> >
> > SMCs associated with Management Mode are in the range 0xC4000040 -
> > 0xC400005f (64 bit) and 0x84000040 - 0x8400005f (32 bit).
> >
> > The function(s) available to the normal world:
> > 1. Request services from the secure MM environment using MM_COMMUNICATE.
> >
> > It also defines MM return codes.
> >
> > Contributed-under: TianoCore Contribution Agreement 1.1
> > Signed-off-by: Achin Gupta <achin.gupta@arm.com>
> > Signed-off-by: Supreeth Venkatesh <supreeth.venkatesh@arm.com>
>
> Both patches applied. Thanks.
I should have spotted this earlier but the following define is not
spec. compliant. It says:
> +#define ARM_SMC_MM_RET_NO_MEMORY -4
but should be
> +#define ARM_SMC_MM_RET_NO_MEMORY -5
Supreeth. Could you please submit a patch to rectify this?
cheers,
Achin
>
> > ---
> > ArmPkg/Include/IndustryStandard/ArmStdSmc.h | 20 +++++++++++++++++++-
> > 1 file changed, 19 insertions(+), 1 deletion(-)
> >
> > diff --git a/ArmPkg/Include/IndustryStandard/ArmStdSmc.h b/ArmPkg/Include/IndustryStandard/ArmStdSmc.h
> > index 593a3ce729..37d0796649 100644
> > --- a/ArmPkg/Include/IndustryStandard/ArmStdSmc.h
> > +++ b/ArmPkg/Include/IndustryStandard/ArmStdSmc.h
> > @@ -1,6 +1,6 @@
> > /** @file
> > *
> > -* Copyright (c) 2012-2014, ARM Limited. All rights reserved.
> > +* Copyright (c) 2012-2017, ARM Limited. All rights reserved.
> > *
> > * This program and the accompanying materials
> > * are licensed and made available under the terms and conditions of the BSD License
> > @@ -40,6 +40,24 @@
> > #define ARM_SMC_STD_REVISION_MAJOR 0x0
> > #define ARM_SMC_STD_REVISION_MINOR 0x1
> >
> > +/*
> > + * Management Mode (MM) calls cover a subset of the Standard Service Call range.
> > + * The list below is not exhaustive.
> > + */
> > +#define ARM_SMC_ID_MM_VERSION_AARCH32 0x84000040
> > +#define ARM_SMC_ID_MM_VERSION_AARCH64 0xC4000040
> > +
> > +// Request service from secure standalone MM environment
> > +#define ARM_SMC_ID_MM_COMMUNICATE_AARCH32 0x84000041
> > +#define ARM_SMC_ID_MM_COMMUNICATE_AARCH64 0xC4000041
> > +
> > +/* MM return error codes */
> > +#define ARM_SMC_MM_RET_SUCCESS 0
> > +#define ARM_SMC_MM_RET_NOT_SUPPORTED -1
> > +#define ARM_SMC_MM_RET_INVALID_PARAMS -2
> > +#define ARM_SMC_MM_RET_DENIED -3
> > +#define ARM_SMC_MM_RET_NO_MEMORY -4
> > +
> > /*
> > * Power State Coordination Interface (PSCI) calls cover a subset of the
> > * Standard Service Call range.
> > --
> > 2.14.1
> >
next prev parent reply other threads:[~2017-10-09 8:47 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-09-27 18:58 [PATCH v2 1/2] ArmPkg/Include: Add standard SMC function IDs for MM interface Supreeth Venkatesh
2017-09-27 18:58 ` [PATCH v2 2/2] ArmPkg/Include: Add SVC function IDs for Management Mode Supreeth Venkatesh
2017-10-06 21:05 ` [PATCH v2 1/2] ArmPkg/Include: Add standard SMC function IDs for MM interface Ard Biesheuvel
2017-10-09 8:52 ` Achin Gupta [this message]
2017-10-09 15:15 ` Supreeth Venkatesh
2017-10-09 22:19 ` Achin Gupta
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20171009085202.GW26498@e104320-lin \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox