From: Ard Biesheuvel <ard.biesheuvel@linaro.org>
To: edk2-devel@lists.01.org, leif.lindholm@linaro.org
Cc: daniel.thompson@linaro.org, masami.hiramatsu@linaro.org
Subject: [PATCH edk2-platforms v2 11/23] Silicon/SynQuacer: add device tree support for eval board
Date: Wed, 25 Oct 2017 18:59:35 +0100 [thread overview]
Message-ID: <20171025175947.22798-12-ard.biesheuvel@linaro.org> (raw)
In-Reply-To: <20171025175947.22798-1-ard.biesheuvel@linaro.org>
Add a device tree description of the SynQuacer SoC, and expose it for
the SynQuacerEvalBoard platforms. This includes the menu option in the
UEFI boot menu to switch between ACPI and DT.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
---
Platform/Socionext/SynQuacerEvalBoard/SynQuacerEvalBoard.dsc | 9 +
Platform/Socionext/SynQuacerEvalBoard/SynQuacerEvalBoard.fdf | 12 +
Silicon/Socionext/SynQuacer/DeviceTree/SynQuacer.dtsi | 515 ++++++++++++++++++++
Silicon/Socionext/SynQuacer/DeviceTree/SynQuacerEvalBoard.dts | 21 +
Silicon/Socionext/SynQuacer/DeviceTree/SynQuacerEvalBoard.inf | 34 ++
5 files changed, 591 insertions(+)
diff --git a/Platform/Socionext/SynQuacerEvalBoard/SynQuacerEvalBoard.dsc b/Platform/Socionext/SynQuacerEvalBoard/SynQuacerEvalBoard.dsc
index 3a7e5183093d..62cba73f10ac 100644
--- a/Platform/Socionext/SynQuacerEvalBoard/SynQuacerEvalBoard.dsc
+++ b/Platform/Socionext/SynQuacerEvalBoard/SynQuacerEvalBoard.dsc
@@ -538,3 +538,12 @@ [Components.common]
MdeModulePkg/Universal/Acpi/AcpiPlatformDxe/AcpiPlatformDxe.inf
Silicon/Socionext/SynQuacer/AcpiTables/AcpiTables.inf
MdeModulePkg/Universal/Acpi/BootGraphicsResourceTableDxe/BootGraphicsResourceTableDxe.inf
+
+ #
+ # DT support
+ #
+ Silicon/Socionext/SynQuacer/DeviceTree/SynQuacerEvalBoard.inf
+ EmbeddedPkg/Drivers/DtPlatformDxe/DtPlatformDxe.inf {
+ <LibraryClasses>
+ DtPlatformDtbLoaderLib|EmbeddedPkg/Library/DxeDtPlatformDtbLoaderLibDefault/DxeDtPlatformDtbLoaderLibDefault.inf
+ }
diff --git a/Platform/Socionext/SynQuacerEvalBoard/SynQuacerEvalBoard.fdf b/Platform/Socionext/SynQuacerEvalBoard/SynQuacerEvalBoard.fdf
index 062480dda6a2..cfcef57b3fa6 100644
--- a/Platform/Socionext/SynQuacerEvalBoard/SynQuacerEvalBoard.fdf
+++ b/Platform/Socionext/SynQuacerEvalBoard/SynQuacerEvalBoard.fdf
@@ -1,3 +1,4 @@
+
#
# Copyright (c) 2013-2014, ARM Limited. All rights reserved.
# Copyright (c) 2017, Linaro Limited. All rights reserved.
@@ -201,6 +202,12 @@ [FV.FvMain]
INF RuleOverride = ACPITABLE Silicon/Socionext/SynQuacer/AcpiTables/AcpiTables.inf
INF MdeModulePkg/Universal/Acpi/BootGraphicsResourceTableDxe/BootGraphicsResourceTableDxe.inf
+ #
+ # DT support
+ #
+ INF EmbeddedPkg/Drivers/DtPlatformDxe/DtPlatformDxe.inf
+ INF RuleOverride = DTB Silicon/Socionext/SynQuacer/DeviceTree/SynQuacerEvalBoard.inf
+
[FV.FVMAIN_COMPACT]
FvAlignment = 16
ERASE_POLARITY = 1
@@ -343,3 +350,8 @@ [Rule.Common.USER_DEFINED.ACPITABLE]
RAW ACPI |.acpi
RAW ASL |.aml
}
+
+[Rule.Common.USER_DEFINED.DTB]
+ FILE FREEFORM = $(NAMED_GUID) {
+ RAW BIN |.dtb
+ }
diff --git a/Silicon/Socionext/SynQuacer/DeviceTree/SynQuacer.dtsi b/Silicon/Socionext/SynQuacer/DeviceTree/SynQuacer.dtsi
new file mode 100644
index 000000000000..14a9635910d0
--- /dev/null
+++ b/Silicon/Socionext/SynQuacer/DeviceTree/SynQuacer.dtsi
@@ -0,0 +1,515 @@
+/** @file
+ * Copyright (c) 2017, Linaro Limited. All rights reserved.
+ *
+ * This program and the accompanying materials are licensed and made
+ * available under the terms and conditions of the BSD License which
+ * accompanies this distribution. The full text of the license may be
+ * found at http://opensource.org/licenses/bsd-license.php
+ *
+ * THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR
+ * IMPLIED.
+ */
+
+#define GIC_SPI 0
+#define GIC_PPI 1
+
+#define IRQ_TYPE_NONE 0
+#define IRQ_TYPE_EDGE_RISING 1
+#define IRQ_TYPE_EDGE_FALLING 2
+#define IRQ_TYPE_EDGE_BOTH (IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING)
+#define IRQ_TYPE_LEVEL_HIGH 4
+#define IRQ_TYPE_LEVEL_LOW 8
+
+/ {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ interrupt-parent = <&gic>;
+ dma-ranges = <0x0 0x0 0x0 0x0 0x100 0x0>;
+
+ aliases {
+ serial0 = &soc_uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ CPU0: cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53","arm,armv8";
+ reg = <0x0>;
+ enable-method = "psci";
+ //cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
+ };
+ CPU1: cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53","arm,armv8";
+ reg = <0x1>;
+ enable-method = "psci";
+ //cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
+ };
+ CPU2: cpu@100 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53","arm,armv8";
+ reg = <0x100>;
+ enable-method = "psci";
+ //cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
+ };
+ CPU3: cpu@101 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53","arm,armv8";
+ reg = <0x101>;
+ enable-method = "psci";
+ //cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
+ };
+ CPU4: cpu@200 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53","arm,armv8";
+ reg = <0x200>;
+ enable-method = "psci";
+ //cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
+ };
+ CPU5: cpu@201 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53","arm,armv8";
+ reg = <0x201>;
+ enable-method = "psci";
+ //cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
+ };
+ CPU6: cpu@300 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53","arm,armv8";
+ reg = <0x300>;
+ enable-method = "psci";
+ //cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
+ };
+ CPU7: cpu@301 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53","arm,armv8";
+ reg = <0x301>;
+ enable-method = "psci";
+ //cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
+ };
+ CPU8: cpu@400 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53","arm,armv8";
+ reg = <0x400>;
+ enable-method = "psci";
+ //cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
+ };
+ CPU9: cpu@401 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53","arm,armv8";
+ reg = <0x401>;
+ enable-method = "psci";
+ //cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
+ };
+ CPU10: cpu@500 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53","arm,armv8";
+ reg = <0x500>;
+ enable-method = "psci";
+ //cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
+ };
+ CPU11: cpu@501 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53","arm,armv8";
+ reg = <0x501>;
+ enable-method = "psci";
+ //cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
+ };
+ CPU12: cpu@600 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53","arm,armv8";
+ reg = <0x600>;
+ enable-method = "psci";
+ //cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
+ };
+ CPU13: cpu@601 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53","arm,armv8";
+ reg = <0x601>;
+ enable-method = "psci";
+ //cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
+ };
+ CPU14: cpu@700 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53","arm,armv8";
+ reg = <0x700>;
+ enable-method = "psci";
+ //cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
+ };
+ CPU15: cpu@701 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53","arm,armv8";
+ reg = <0x701>;
+ enable-method = "psci";
+ //cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
+ };
+ CPU16: cpu@800 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53","arm,armv8";
+ reg = <0x800>;
+ enable-method = "psci";
+ //cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
+ };
+ CPU17: cpu@801 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53","arm,armv8";
+ reg = <0x801>;
+ enable-method = "psci";
+ //cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
+ };
+ CPU18: cpu@900 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53","arm,armv8";
+ reg = <0x900>;
+ enable-method = "psci";
+ //cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
+ };
+ CPU19: cpu@901 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53","arm,armv8";
+ reg = <0x901>;
+ enable-method = "psci";
+ //cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
+ };
+ CPU20: cpu@a00 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53","arm,armv8";
+ reg = <0xa00>;
+ enable-method = "psci";
+ //cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
+ };
+ CPU21: cpu@a01 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53","arm,armv8";
+ reg = <0xa01>;
+ enable-method = "psci";
+ //cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
+ };
+ CPU22: cpu@b00 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53","arm,armv8";
+ reg = <0xb00>;
+ enable-method = "psci";
+ //cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
+ };
+ CPU23: cpu@b01 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53","arm,armv8";
+ reg = <0xb01>;
+ enable-method = "psci";
+ //cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
+ };
+
+ cpu-map {
+ cluster0 {
+ core0 {
+ cpu = <&CPU0>;
+ };
+ core1 {
+ cpu = <&CPU1>;
+ };
+ };
+ cluster1 {
+ core0 {
+ cpu = <&CPU2>;
+ };
+ core1 {
+ cpu = <&CPU3>;
+ };
+ };
+ cluster2 {
+ core0 {
+ cpu = <&CPU4>;
+ };
+ core1 {
+ cpu = <&CPU5>;
+ };
+ };
+ cluster3 {
+ core0 {
+ cpu = <&CPU6>;
+ };
+ core1 {
+ cpu = <&CPU7>;
+ };
+ };
+ cluster4 {
+ core0 {
+ cpu = <&CPU8>;
+ };
+ core1 {
+ cpu = <&CPU9>;
+ };
+ };
+ cluster5 {
+ core0 {
+ cpu = <&CPU10>;
+ };
+ core1 {
+ cpu = <&CPU11>;
+ };
+ };
+ cluster6 {
+ core0 {
+ cpu = <&CPU12>;
+ };
+ core1 {
+ cpu = <&CPU13>;
+ };
+ };
+ cluster7 {
+ core0 {
+ cpu = <&CPU14>;
+ };
+ core1 {
+ cpu = <&CPU15>;
+ };
+ };
+ cluster8 {
+ core0 {
+ cpu = <&CPU16>;
+ };
+ core1 {
+ cpu = <&CPU17>;
+ };
+ };
+ cluster9 {
+ core0 {
+ cpu = <&CPU18>;
+ };
+ core1 {
+ cpu = <&CPU19>;
+ };
+ };
+ cluster10 {
+ core0 {
+ cpu = <&CPU20>;
+ };
+ core1 {
+ cpu = <&CPU21>;
+ };
+ };
+ cluster11 {
+ core0 {
+ cpu = <&CPU22>;
+ };
+ core1 {
+ cpu = <&CPU23>;
+ };
+ };
+ };
+ };
+
+ idle-states {
+ entry-method = "arm,psci";
+
+ CPU_SLEEP_0: cpu-sleep-0 {
+ compatible = "arm,idle-state";
+ arm,psci-suspend-param = <0x0010000>;
+ entry-latency-us = <300>;
+ exit-latency-us = <1200>;
+ min-residency-us = <2000>;
+ local-timer-stop;
+ };
+
+ CLUSTER_SLEEP_0: cluster-sleep-0 {
+ compatible = "arm,idle-state";
+ arm,psci-suspend-param = <0x1010000>;
+ entry-latency-us = <400>;
+ exit-latency-us = <1200>;
+ min-residency-us = <2500>;
+ local-timer-stop;
+ };
+ };
+
+ gic: interrupt-controller@30000000 {
+ compatible = "arm,gic-v3";
+ reg = <0x0 0x30000000 0x0 0x10000>, // GICD
+ <0x0 0x30400000 0x0 0x300000>, // GICR
+ <0x0 0x2c000000 0x0 0x2000>, // GICC
+ <0x0 0x2c010000 0x0 0x1000>, // GICH
+ <0x0 0x2c020000 0x0 0x2000>; // GICV
+ #interrupt-cells = <3>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+ interrupt-controller;
+ interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_LOW>;
+
+ its: gic-its@30020000 {
+ compatible = "arm,gic-v3-its";
+ reg = <0x0 0x30020000 0x0 0x20000>;
+ #msi-cells = <1>;
+ msi-controller;
+ socionext,synquacer-pre-its = <0x58000000 0x200000>;
+ };
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, // secure
+ <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, // non-secure
+ <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, // virtual
+ <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; // HYP
+ };
+
+ mmio-timer@2a810000 {
+ compatible = "arm,armv7-timer-mem";
+ reg = <0x0 0x2a810000 0x0 0x10000>;
+ clock-frequency = <100000000>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+ frame@2a830000 {
+ frame-number = <0>;
+ interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x0 0x2a830000 0x0 0x10000>;
+ };
+ };
+
+ pmu {
+ compatible = "arm,armv8-pmuv3";
+ interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
+ };
+
+ psci {
+ compatible = "arm,psci-1.0";
+ method = "smc";
+ };
+
+ mailbox: mhu@45000000 {
+ compatible = "arm,mhu", "arm,primecell";
+ reg = <0x0 0x45000000 0x0 0x1000>;
+ interrupts = <GIC_SPI 482 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 480 IRQ_TYPE_LEVEL_HIGH>; /* Non-Sec */
+ interrupt-names = "mhu_lpri_rx", "mhu_hpri_rx";
+ #mbox-cells = <1>;
+ clocks = <&clk_apb>;
+ clock-names = "apb_pclk";
+ };
+
+ sram: sram@45200000 {
+ compatible = "mmio-sram";
+ reg = <0x0 0x45200000 0x0 0x200>;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x0 0x45200000 0x200>;
+
+ cpu_scp_hpri: scp-shmem@0 {
+ reg = <0x0 0x200>;
+ };
+ };
+
+ scpi {
+ compatible = "arm,scpi";
+ mboxes = <&mailbox 1>;
+ shmem = <&cpu_scp_hpri>;
+ };
+
+ clk_uart: refclk62500khz {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <62500000>;
+ clock-output-names = "uartclk";
+ };
+
+ clk_apb: refclk100mhz {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <100000000>;
+ clock-output-names = "apb_pclk";
+ };
+
+ soc_uart0: uart@2a400000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x0 0x2a400000 0x0 0x1000>;
+ interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk_uart &clk_apb>;
+ clock-names = "uartclk", "apb_pclk";
+ };
+
+ clk_netsec: refclk125mhz {
+ compatible = "fixed-clock";
+ clock-frequency = <125000000>;
+ #clock-cells = <0>;
+ };
+
+ eth0: netsec@522D0000 {
+ compatible = "socionext,synquacer-netsec";
+ reg = <0 FixedPcdGet32 (PcdNetsecDxeBaseAddress) 0x0 0x10000>,
+ <0 FixedPcdGet32 (PcdEepRomBase) 0x0 0x10000>;
+ interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk_netsec>;
+ phy-mode = "rgmii";
+ max-speed = <1000>;
+ max-frame-size = <9000>;
+ phy-handle = <ðphy0>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethphy0: ethernet-phy {
+ device_type = "ethernet-phy";
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <FixedPcdGet32 (PcdPhyDevAddr)>;
+ };
+ };
+
+ smmu: iommu@582c0000 {
+ compatible = "arm,mmu-500", "arm,smmu-v2";
+ reg = <0x0 0x582c0000 0x0 0x10000>;
+ #global-interrupts = <1>;
+ interrupts = <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>;
+ #iommu-cells = <1>;
+ status = "disabled";
+ };
+
+ pcie0: pcie@60000000 {
+ compatible = "socionext,synquacer-pcie-ecam", "snps,dw-pcie-ecam";
+ device_type = "pci";
+ reg = <0x0 0x60000000 0x0 0x7f00000>;
+ bus-range = <0x0 0x7e>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges = <0x1000000 0x00 0x00000000 0x00 0x67f00000 0x0 0x00010000>,
+ <0x2000000 0x00 0x68000000 0x00 0x68000000 0x0 0x08000000>,
+ <0x3000000 0x3e 0x00000000 0x3e 0x00000000 0x1 0x00000000>;
+
+ #interrupt-cells = <0x1>;
+ interrupt-map-mask = <0x0 0x0 0x0 0x0>;
+ interrupt-map = <0x0 0x0 0x0 0x0 &gic 0x0 0x0 GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
+
+ msi-map = <0x000 &its 0x0 0x7f00>;
+ dma-coherent;
+ };
+
+ pcie1: pcie@70000000 {
+ compatible = "socionext,synquacer-pcie-ecam", "snps,dw-pcie-ecam";
+ device_type = "pci";
+ reg = <0x0 0x70000000 0x0 0x7f00000>;
+ bus-range = <0x0 0x7e>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges = <0x1000000 0x00 0x00010000 0x00 0x77f00000 0x0 0x00010000>,
+ <0x2000000 0x00 0x78000000 0x00 0x78000000 0x0 0x08000000>,
+ <0x3000000 0x3f 0x00000000 0x3f 0x00000000 0x1 0x00000000>;
+
+ #interrupt-cells = <0x1>;
+ interrupt-map-mask = <0x0 0x0 0x0 0x0>;
+ interrupt-map = <0x0 0x0 0x0 0x0 &gic 0x0 0x0 GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>;
+
+ msi-map = <0x0 &its 0x10000 0x7f00>;
+ dma-coherent;
+ };
+};
diff --git a/Silicon/Socionext/SynQuacer/DeviceTree/SynQuacerEvalBoard.dts b/Silicon/Socionext/SynQuacer/DeviceTree/SynQuacerEvalBoard.dts
new file mode 100644
index 000000000000..cda72fdf2f99
--- /dev/null
+++ b/Silicon/Socionext/SynQuacer/DeviceTree/SynQuacerEvalBoard.dts
@@ -0,0 +1,21 @@
+/** @file
+ * Copyright (c) 2017, Linaro Limited. All rights reserved.
+ *
+ * This program and the accompanying materials are licensed and made
+ * available under the terms and conditions of the BSD License which
+ * accompanies this distribution. The full text of the license may be
+ * found at http://opensource.org/licenses/bsd-license.php
+ *
+ * THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR
+ * IMPLIED.
+ */
+
+/dts-v1/;
+
+#include "SynQuacer.dtsi"
+
+/ {
+ model = "SynQuacer Evaluation Board";
+ compatible = "socionext,synquacer-eval-board", "socionext,synquacer";
+};
diff --git a/Silicon/Socionext/SynQuacer/DeviceTree/SynQuacerEvalBoard.inf b/Silicon/Socionext/SynQuacer/DeviceTree/SynQuacerEvalBoard.inf
new file mode 100644
index 000000000000..17e8467d274d
--- /dev/null
+++ b/Silicon/Socionext/SynQuacer/DeviceTree/SynQuacerEvalBoard.inf
@@ -0,0 +1,34 @@
+## @file
+#
+# Device tree description of the SynQuacer platform
+#
+# Copyright (c) 2017, Linaro Ltd. All rights reserved.
+#
+# This program and the accompanying materials
+# are licensed and made available under the terms and conditions of the BSD License
+# which accompanies this distribution. The full text of the license may be found at
+# http://opensource.org/licenses/bsd-license.php
+#
+# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+#
+##
+
+[Defines]
+ INF_VERSION = 0x00010019
+ BASE_NAME = SynQuacerDeviceTree
+ FILE_GUID = 25462CDA-221F-47DF-AC1D-259CFAA4E326 # gDtPlatformDefaultDtbFileGuid
+ MODULE_TYPE = USER_DEFINED
+ VERSION_STRING = 1.0
+
+[Sources]
+ SynQuacerEvalBoard.dts
+
+[Packages]
+ MdePkg/MdePkg.dec
+ Silicon/Socionext/SynQuacer/Drivers/Net/NetsecDxe/NetsecDxe.dec
+
+[FixedPcd]
+ gNetsecDxeTokenSpaceGuid.PcdNetsecDxeBaseAddress
+ gNetsecDxeTokenSpaceGuid.PcdEepRomBase
+ gNetsecDxeTokenSpaceGuid.PcdPhyDevAddr
--
2.11.0
next prev parent reply other threads:[~2017-10-25 17:56 UTC|newest]
Thread overview: 54+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-10-25 17:59 [PATCH edk2-platforms v2 00/23] add support for Socionext Synquacer Ard Biesheuvel
2017-10-25 17:59 ` [PATCH edk2-platforms v2 01/23] Silicon/SynQuacer: add package with platform headers Ard Biesheuvel
2017-10-26 14:39 ` Leif Lindholm
2017-10-25 17:59 ` [PATCH edk2-platforms v2 02/23] Silicon/Socionext: add driver for NETSEC network controller Ard Biesheuvel
2017-10-26 14:49 ` Leif Lindholm
2017-10-25 17:59 ` [PATCH edk2-platforms v2 03/23] Silicon/SynQuacer: add MemoryInitPeiLib implementation Ard Biesheuvel
2017-10-26 14:56 ` Leif Lindholm
2017-10-26 14:57 ` Ard Biesheuvel
2017-10-26 15:05 ` Leif Lindholm
2017-10-25 17:59 ` [PATCH edk2-platforms v2 04/23] Platform: add support for Socionext SynQuacer eval board Ard Biesheuvel
2017-10-26 15:02 ` Leif Lindholm
2017-10-26 15:14 ` Ard Biesheuvel
2017-10-25 17:59 ` [PATCH edk2-platforms v2 05/23] Silicon/SynQuacer: implement PciSegmentLib to support dual RCs Ard Biesheuvel
2017-10-26 15:06 ` Leif Lindholm
2017-10-25 17:59 ` [PATCH edk2-platforms v2 06/23] Silicon/SynQuacer: implement PciHostBridgeLib support Ard Biesheuvel
2017-10-26 15:10 ` Leif Lindholm
2017-10-26 15:12 ` Ard Biesheuvel
2017-10-25 17:59 ` [PATCH edk2-platforms v2 07/23] Silicon/SynQuacer: implement EFI_CPU_IO2_PROTOCOL Ard Biesheuvel
2017-10-26 15:13 ` Leif Lindholm
2017-10-25 17:59 ` [PATCH edk2-platforms v2 08/23] Platform/SynQuacerEvalBoard: add PCI support Ard Biesheuvel
2017-10-26 15:38 ` Leif Lindholm
2017-10-26 15:41 ` Ard Biesheuvel
2017-10-26 21:49 ` Leif Lindholm
2017-10-25 17:59 ` [PATCH edk2-platforms v2 09/23] Platform/SynQuacerEvalBoard: add NETSEC driver Ard Biesheuvel
2017-10-26 15:39 ` Leif Lindholm
2017-10-25 17:59 ` [PATCH edk2-platforms v2 10/23] Silicon/SynQuacer: add ACPI support Ard Biesheuvel
2017-10-26 17:13 ` Leif Lindholm
2017-10-25 17:59 ` Ard Biesheuvel [this message]
2017-10-26 17:15 ` [PATCH edk2-platforms v2 11/23] Silicon/SynQuacer: add device tree support for eval board Leif Lindholm
2017-10-25 17:59 ` [PATCH edk2-platforms v2 12/23] Silicon/SynQuacer: add NorFlashPlatformLib implementation Ard Biesheuvel
2017-10-25 17:59 ` [PATCH edk2-platforms v2 13/23] Silicon/Socionext: add driver for SPI NOR flash Ard Biesheuvel
2017-10-26 21:19 ` Leif Lindholm
2017-10-28 14:16 ` Ard Biesheuvel
2017-10-28 21:31 ` Leif Lindholm
2017-10-25 17:59 ` [PATCH edk2-platforms v2 14/23] Platform/SynQuacer: incorporate NOR flash and variable drivers Ard Biesheuvel
2017-10-25 17:59 ` [PATCH edk2-platforms v2 15/23] Silicon/SynQuacer: implement PlatformFlashAccessLib Ard Biesheuvel
2017-10-26 21:22 ` Leif Lindholm
2017-10-25 17:59 ` [PATCH edk2-platforms v2 16/23] SynQuacer/SynQuacerMemoryInitPeiLib: add capsule support Ard Biesheuvel
2017-10-26 21:27 ` Leif Lindholm
2017-10-25 17:59 ` [PATCH edk2-platforms v2 17/23] Socionext/SynQuacerEvalBoard: wire up basic " Ard Biesheuvel
2017-10-26 21:28 ` Leif Lindholm
2017-10-25 17:59 ` [PATCH edk2-platforms v2 18/23] Socionext/SynQuacerEvalBoard: switch to execute in place Ard Biesheuvel
2017-10-26 21:30 ` Leif Lindholm
2017-10-25 17:59 ` [PATCH edk2-platforms v2 19/23] Platform/SynQuacerEvalBoard: add signed capsule update support Ard Biesheuvel
2017-10-26 21:33 ` Leif Lindholm
2017-10-28 13:48 ` Ard Biesheuvel
2017-10-25 17:59 ` [PATCH edk2-platforms v2 20/23] Silicon/SynQuacer/AcpiTables: hide PCI domain #0 Ard Biesheuvel
2017-10-26 21:34 ` Leif Lindholm
2017-10-25 17:59 ` [PATCH edk2-platforms v2 21/23] Silicon/SynQuacerPciHostBridgeLib: add workaround to support 32-bit only cards Ard Biesheuvel
2017-10-26 21:35 ` Leif Lindholm
2017-10-25 17:59 ` [PATCH edk2-platforms v2 22/23] Platform/Socionext: add support for Socionext Developer Box rev 0.1 Ard Biesheuvel
2017-10-26 21:46 ` Leif Lindholm
2017-10-25 17:59 ` [PATCH edk2-platforms v2 23/23] Platform/DeveloperBox: add ConsolePrefDxe driver Ard Biesheuvel
2017-10-26 21:46 ` Leif Lindholm
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20171025175947.22798-12-ard.biesheuvel@linaro.org \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox