From: Leif Lindholm <leif.lindholm@linaro.org>
To: Marcin Wojtas <mw@semihalf.com>
Cc: edk2-devel@lists.01.org, ard.biesheuvel@linaro.org,
nadavh@marvell.com, neta@marvell.com, kostap@marvell.com,
jinghua@marvell.com, jsd@semihalf.com
Subject: Re: [platforms: PATCH 07/10] Marvell/Drivers: Pp2Dxe: Change settings for the always-up link
Date: Thu, 26 Oct 2017 14:38:35 +0100 [thread overview]
Message-ID: <20171026133835.p43465xgj5ueiuop@bivouac.eciton.net> (raw)
In-Reply-To: <1508980777-29006-8-git-send-email-mw@semihalf.com>
On Thu, Oct 26, 2017 at 03:19:34AM +0200, Marcin Wojtas wrote:
> Currently initial forcing link status happened for all ports, not only
> marked as 'always-up'. Although this didn't actually matter for the MAC
> settings, because MAC is automatically updated with PHY HW polling
> feature of the controller, perform mv_gop110_fl_cfg only when
> the appropriate flag is true. Also in such case, force the link as up,
> using a new library routine.
>
> Contributed-under: TianoCore Contribution Agreement 1.1
> Signed-off-by: Marcin Wojtas <mw@semihalf.com>
> ---
> Platform/Marvell/Drivers/Net/Pp2Dxe/Mvpp2Lib.c | 31 ++++++++++++++++++++
> Platform/Marvell/Drivers/Net/Pp2Dxe/Mvpp2Lib.h | 7 +++++
> Platform/Marvell/Drivers/Net/Pp2Dxe/Pp2Dxe.c | 6 +++-
> 3 files changed, 43 insertions(+), 1 deletion(-)
>
> diff --git a/Platform/Marvell/Drivers/Net/Pp2Dxe/Mvpp2Lib.c b/Platform/Marvell/Drivers/Net/Pp2Dxe/Mvpp2Lib.c
> index 53154db..e3ddc58 100644
> --- a/Platform/Marvell/Drivers/Net/Pp2Dxe/Mvpp2Lib.c
> +++ b/Platform/Marvell/Drivers/Net/Pp2Dxe/Mvpp2Lib.c
> @@ -4804,6 +4804,37 @@ MvGop110PortEventsMask (
> return 0;
> }
>
> +/*
> + * Sets "Force Link Pass" and "Do Not Force Link Fail" bits.
> + * This function should only be called when the port is disabled.
> + */
> +VOID
> +MvGop110GmacForceLinkModeSet(
> + IN PP2DXE_PORT *Port,
> + IN BOOLEAN ForceLinkUp,
> + IN BOOLEAN ForceLinkDown)
> +{
> + UINT32 RegVal;
> +
> + /* Can't force link pass and link fail at the same time */
Then why pass two parameters to the function?
The function is called ForceLink.
Have one ForceLinkUp BOOL parameter, and force up if TRUE and down if
FALSE.
> + if ((ForceLinkUp) && (ForceLinkDown))
> + return;
> +
> + RegVal = MvGop110GmacRead (Port, MVPP2_PORT_AUTO_NEG_CFG_REG);
> +
> + if (ForceLinkUp)
Always {} with if/else (throughout).
/
Leif
> + RegVal |= MVPP2_PORT_AUTO_NEG_CFG_FORCE_LINK_UP_MASK;
> + else
> + RegVal &= ~MVPP2_PORT_AUTO_NEG_CFG_FORCE_LINK_UP_MASK;
> +
> + if (ForceLinkDown)
> + RegVal |= MVPP2_PORT_AUTO_NEG_CFG_FORCE_LINK_DOWN_MASK;
> + else
> + RegVal &= ~MVPP2_PORT_AUTO_NEG_CFG_FORCE_LINK_DOWN_MASK;
> +
> + MvGop110GmacWrite (Port, MVPP2_PORT_AUTO_NEG_CFG_REG, RegVal);
> +}
> +
> INT32
> MvGop110FlCfg (
> IN PP2DXE_PORT *Port
> diff --git a/Platform/Marvell/Drivers/Net/Pp2Dxe/Mvpp2Lib.h b/Platform/Marvell/Drivers/Net/Pp2Dxe/Mvpp2Lib.h
> index a7011f7..2938777 100644
> --- a/Platform/Marvell/Drivers/Net/Pp2Dxe/Mvpp2Lib.h
> +++ b/Platform/Marvell/Drivers/Net/Pp2Dxe/Mvpp2Lib.h
> @@ -504,6 +504,13 @@ MvGop110XlgPortLinkEventMask (
> IN PP2DXE_PORT *Port
> );
>
> +VOID
> +MvGop110GmacForceLinkModeSet (
> + IN PP2DXE_PORT *Port,
> + IN BOOLEAN ForceLinkUp,
> + IN BOOLEAN ForceLinkDown
> + );
> +
> INT32
> MvGop110FlCfg (
> IN PP2DXE_PORT *Port
> diff --git a/Platform/Marvell/Drivers/Net/Pp2Dxe/Pp2Dxe.c b/Platform/Marvell/Drivers/Net/Pp2Dxe/Pp2Dxe.c
> index 2827976..94a2988 100644
> --- a/Platform/Marvell/Drivers/Net/Pp2Dxe/Pp2Dxe.c
> +++ b/Platform/Marvell/Drivers/Net/Pp2Dxe/Pp2Dxe.c
> @@ -1310,7 +1310,11 @@ Pp2DxeInitialiseController (
> NetCompConfig |= MvpPp2xGop110NetcCfgCreate(&Pp2Context->Port);
>
> MvGop110PortInit(&Pp2Context->Port);
> - MvGop110FlCfg(&Pp2Context->Port);
> +
> + if (Pp2Context->Port.AlwaysUp == TRUE) {
> + MvGop110GmacForceLinkModeSet (&Pp2Context->Port, TRUE, FALSE);
> + MvGop110FlCfg (&Pp2Context->Port);
> + }
>
> Status = gBS->CreateEvent (
> EVT_SIGNAL_EXIT_BOOT_SERVICES,
> --
> 2.7.4
>
next prev parent reply other threads:[~2017-10-26 13:34 UTC|newest]
Thread overview: 35+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-10-26 1:19 [platforms: PATCH 00/10] Armada 7k/8k - misc improvements pt.2 Marcin Wojtas
2017-10-26 1:19 ` [platforms: PATCH 01/10] Marvell/Drivers: MvI2cDxe: Abort transaction immediately upon fail Marcin Wojtas
2017-10-26 12:51 ` Leif Lindholm
2017-10-26 13:19 ` Marcin Wojtas
2017-10-26 13:54 ` Leif Lindholm
2017-10-26 13:55 ` Marcin Wojtas
2017-10-26 1:19 ` [platforms: PATCH 02/10] Marvell/Drivers: MvI2cDxe: Fix returning status in MvI2cStartRequest Marcin Wojtas
2017-10-26 13:11 ` Leif Lindholm
2017-10-26 13:22 ` Marcin Wojtas
2017-10-26 13:55 ` Leif Lindholm
2017-10-26 1:19 ` [platforms: PATCH 03/10] Marvell/Drivers: MvI2cDxe: Reduce bus occupation time Marcin Wojtas
2017-10-26 13:13 ` Leif Lindholm
2017-10-26 1:19 ` [platforms: PATCH 04/10] Marvell/Library: MppLib: Prevent overwriting PCD values Marcin Wojtas
2017-10-26 13:15 ` Leif Lindholm
2017-10-26 1:19 ` [platforms: PATCH 05/10] Marvell/Library: MppLib: Disable the stack protector Marcin Wojtas
2017-10-26 13:26 ` Leif Lindholm
2017-10-26 13:29 ` Ard Biesheuvel
2017-10-26 13:57 ` Leif Lindholm
2017-10-26 1:19 ` [platforms: PATCH 06/10] Marvell/Library: MppLib: Take 0xFF placeholders into account Marcin Wojtas
2017-10-26 13:30 ` Leif Lindholm
2017-10-26 1:19 ` [platforms: PATCH 07/10] Marvell/Drivers: Pp2Dxe: Change settings for the always-up link Marcin Wojtas
2017-10-26 13:38 ` Leif Lindholm [this message]
2017-10-26 1:19 ` [platforms: PATCH 08/10] Marvell/Drivers: XenonDxe: Fix UHS signalling mode setting Marcin Wojtas
2017-10-26 13:41 ` Leif Lindholm
2017-10-26 1:19 ` [platforms: PATCH 09/10] Marvell/Drivers: XenonDxe: Fix base clock frequency Marcin Wojtas
2017-10-26 13:46 ` Leif Lindholm
2017-10-26 13:54 ` Marcin Wojtas
2017-10-26 13:55 ` Ard Biesheuvel
2017-10-26 13:59 ` Marcin Wojtas
2017-10-26 14:02 ` Leif Lindholm
2017-10-26 14:29 ` Marcin Wojtas
2017-10-26 14:52 ` Leif Lindholm
2017-10-26 15:07 ` Marcin Wojtas
2017-10-26 1:19 ` [platforms: PATCH 10/10] Marvell/Drivers: XenonDxe: Do not modify FIFO default values Marcin Wojtas
2017-10-26 13:47 ` Leif Lindholm
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20171026133835.p43465xgj5ueiuop@bivouac.eciton.net \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox