From: Leif Lindholm <leif.lindholm@linaro.org>
To: Marcin Wojtas <mw@semihalf.com>
Cc: edk2-devel@lists.01.org, ard.biesheuvel@linaro.org,
nadavh@marvell.com, neta@marvell.com, kostap@marvell.com,
jinghua@marvell.com, jsd@semihalf.com
Subject: Re: [platforms: PATCH 4/4] Marvell/Armada: Enable variables support
Date: Thu, 9 Nov 2017 15:04:22 +0000 [thread overview]
Message-ID: <20171109150422.z52qvcszi3q2z3ua@bivouac.eciton.net> (raw)
In-Reply-To: <1509879339-10516-5-git-send-email-mw@semihalf.com>
On Sun, Nov 05, 2017 at 11:55:39AM +0100, Marcin Wojtas wrote:
> Wire up the non-volatile EFI variable store support, by switching from
> the emulation driver to the real one. Define default values for
> memory mapped SPI access, which must be configured by the early
> firmware. In order to ensure proper execution, configure initialization
> order with Depex entries.
(And drop Depex entries from here.)
If you do:
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
> Contributed-under: TianoCore Contribution Agreement 1.1
> Signed-off-by: Marcin Wojtas <mw@semihalf.com>
> ---
> Platform/Marvell/Armada/Armada.dsc.inc | 25 +++++++++++++++++++-
> Platform/Marvell/Armada/Armada70x0.fdf | 6 ++++-
> Platform/Marvell/Drivers/Spi/Devices/MvSpiFlash.inf | 5 +++-
> Platform/Marvell/Drivers/Spi/MvSpiDxe.inf | 5 +++-
> Platform/Marvell/Marvell.dec | 3 +++
> 5 files changed, 40 insertions(+), 4 deletions(-)
>
> diff --git a/Platform/Marvell/Armada/Armada.dsc.inc b/Platform/Marvell/Armada/Armada.dsc.inc
> index 2cd96e6..cccc3e0 100644
> --- a/Platform/Marvell/Armada/Armada.dsc.inc
> +++ b/Platform/Marvell/Armada/Armada.dsc.inc
> @@ -371,6 +371,17 @@
> # TRNG
> gMarvellTokenSpaceGuid.PcdEip76TrngBaseAddress|0xF2760000
>
> + #
> + # Variable store - default values
> + #
> + gMarvellTokenSpaceGuid.PcdSpiMemoryBase|0xF9000000
> + gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableBase|0xF93C0000
> + gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableSize|0x00010000
> + gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingBase|0xF93D0000
> + gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingSize|0x00010000
> + gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareBase|0xF93E0000
> + gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareSize|0x00010000
> +
> ################################################################################
> #
> # Components Section - list of all EDK II Modules needed by this Platform
> @@ -428,7 +439,6 @@
> MdeModulePkg/Core/RuntimeDxe/RuntimeDxe.inf
> MdeModulePkg/Universal/SecurityStubDxe/SecurityStubDxe.inf
> MdeModulePkg/Universal/CapsuleRuntimeDxe/CapsuleRuntimeDxe.inf
> - MdeModulePkg/Universal/Variable/EmuRuntimeDxe/EmuVariableRuntimeDxe.inf
>
> EmbeddedPkg/EmbeddedMonotonicCounter/EmbeddedMonotonicCounter.inf
> MdeModulePkg/Universal/ResetSystemRuntimeDxe/ResetSystemRuntimeDxe.inf
> @@ -485,6 +495,19 @@
> NULL|MdeModulePkg/Library/BootMaintenanceManagerUiLib/BootMaintenanceManagerUiLib.inf
> }
>
> + #
> + # Variable services
> + #
> + Platform/Marvell/Drivers/Spi/Variables/MvFvbDxe.inf
> + MdeModulePkg/Universal/FaultTolerantWriteDxe/FaultTolerantWriteDxe.inf
> + MdeModulePkg/Universal/Variable/RuntimeDxe/VariableRuntimeDxe.inf {
> + <LibraryClasses>
> + AuthVariableLib|MdeModulePkg/Library/AuthVariableLibNull/AuthVariableLibNull.inf
> + NULL|MdeModulePkg/Library/VarCheckUefiLib/VarCheckUefiLib.inf
> + TpmMeasurementLib|MdeModulePkg/Library/TpmMeasurementLibNull/TpmMeasurementLibNull.inf
> + VarCheckLib|MdeModulePkg/Library/VarCheckLib/VarCheckLib.inf
> + }
> +
> # UEFI application (Shell Embedded Boot Loader)
> ShellPkg/Application/Shell/Shell.inf {
> <LibraryClasses>
> diff --git a/Platform/Marvell/Armada/Armada70x0.fdf b/Platform/Marvell/Armada/Armada70x0.fdf
> index ec2c368..ca92c60 100644
> --- a/Platform/Marvell/Armada/Armada70x0.fdf
> +++ b/Platform/Marvell/Armada/Armada70x0.fdf
> @@ -103,7 +103,6 @@ FvNameGuid = 5eda4200-2c5f-43cb-9da3-0baf74b1b30c
> INF MdeModulePkg/Core/RuntimeDxe/RuntimeDxe.inf
> INF MdeModulePkg/Universal/SecurityStubDxe/SecurityStubDxe.inf
> INF MdeModulePkg/Universal/CapsuleRuntimeDxe/CapsuleRuntimeDxe.inf
> - INF MdeModulePkg/Universal/Variable/EmuRuntimeDxe/EmuVariableRuntimeDxe.inf
> INF EmbeddedPkg/EmbeddedMonotonicCounter/EmbeddedMonotonicCounter.inf
> INF MdeModulePkg/Universal/ResetSystemRuntimeDxe/ResetSystemRuntimeDxe.inf
> INF EmbeddedPkg/RealTimeClockRuntimeDxe/RealTimeClockRuntimeDxe.inf
> @@ -115,6 +114,11 @@ FvNameGuid = 5eda4200-2c5f-43cb-9da3-0baf74b1b30c
> INF Platform/Marvell/Drivers/Spi/Devices/MvSpiFlash.inf
> INF Platform/Marvell/Armada/Drivers/Armada70x0RngDxe/Armada70x0RngDxe.inf
>
> + # Variable services
> + INF Platform/Marvell/Drivers/Spi/Variables/MvFvbDxe.inf
> + INF MdeModulePkg/Universal/FaultTolerantWriteDxe/FaultTolerantWriteDxe.inf
> + INF MdeModulePkg/Universal/Variable/RuntimeDxe/VariableRuntimeDxe.inf
> +
> # Network support
> INF MdeModulePkg/Universal/Network/SnpDxe/SnpDxe.inf
> INF MdeModulePkg/Universal/Network/DpcDxe/DpcDxe.inf
> diff --git a/Platform/Marvell/Drivers/Spi/Devices/MvSpiFlash.inf b/Platform/Marvell/Drivers/Spi/Devices/MvSpiFlash.inf
> index 200a00c..c6bbe5e 100644
> --- a/Platform/Marvell/Drivers/Spi/Devices/MvSpiFlash.inf
> +++ b/Platform/Marvell/Drivers/Spi/Devices/MvSpiFlash.inf
> @@ -64,4 +64,7 @@
> gMarvellSpiFlashProtocolGuid
>
> [Depex]
> - TRUE
> + #
> + # MvSpiFlashDxe must be loaded prior to variables driver MvFvbDxe
> + #
> + BEFORE gMarvellFvbDxeGuid
> diff --git a/Platform/Marvell/Drivers/Spi/MvSpiDxe.inf b/Platform/Marvell/Drivers/Spi/MvSpiDxe.inf
> index 9fe246f..ac0e407 100644
> --- a/Platform/Marvell/Drivers/Spi/MvSpiDxe.inf
> +++ b/Platform/Marvell/Drivers/Spi/MvSpiDxe.inf
> @@ -67,4 +67,7 @@
> gMarvellSpiMasterProtocolGuid
>
> [Depex]
> - TRUE
> + #
> + # MvSpiDxe must be loaded prior to MvSpiFlash driver
> + #
> + BEFORE gMarvellSpiFlashDxeGuid
> diff --git a/Platform/Marvell/Marvell.dec b/Platform/Marvell/Marvell.dec
> index 6aa2a8d..2eb6238 100644
> --- a/Platform/Marvell/Marvell.dec
> +++ b/Platform/Marvell/Marvell.dec
> @@ -56,6 +56,9 @@
> gShellFUpdateHiiGuid = { 0x9b5d2176, 0x590a, 0x49db, { 0x89, 0x5d, 0x4a, 0x70, 0xfe, 0xad, 0xbe, 0x24 } }
> gShellSfHiiGuid = { 0x03a67756, 0x8cde, 0x4638, { 0x82, 0x34, 0x4a, 0x0f, 0x6d, 0x58, 0x81, 0x39 } }
>
> + gMarvellFvbDxeGuid = { 0x42903750, 0x7e61, 0x4aaf, { 0x83, 0x29, 0xbf, 0x42, 0x36, 0x4e, 0x24, 0x85 } }
> + gMarvellSpiFlashDxeGuid = { 0x49d7fb74, 0x306d, 0x42bd, { 0x94, 0xc8, 0xc0, 0xc5, 0x4b, 0x18, 0x1d, 0xd7 } }
> +
> [Protocols]
> # installed as a protocol by PlatInitDxe to force ordering between DXE drivers
> # that depend on the lowlevel platform initialization having been completed
> --
> 2.7.4
>
prev parent reply other threads:[~2017-11-09 15:00 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-11-05 10:55 [platforms: PATCH 0/4] Armada 7k/8k variable support Marcin Wojtas
2017-11-05 10:55 ` [platforms: PATCH 1/4] Marvell/Drivers: MvSpiFlash: Enable using driver in RT Marcin Wojtas
2017-11-09 13:38 ` Leif Lindholm
2017-11-05 10:55 ` [platforms: PATCH 2/4] Marvell/Drivers: MvSpiDxe: " Marcin Wojtas
2017-11-09 13:44 ` Leif Lindholm
2017-11-09 13:46 ` Marcin Wojtas
2017-11-05 10:55 ` [platforms: PATCH 3/4] Platform/Marvell: Introduce MvFvbDxe variable support driver Marcin Wojtas
2017-11-09 15:02 ` Leif Lindholm
2017-11-09 15:16 ` Marcin Wojtas
2017-11-09 15:40 ` Leif Lindholm
2017-11-09 15:48 ` Marcin Wojtas
2017-11-09 16:04 ` Leif Lindholm
2017-11-05 10:55 ` [platforms: PATCH 4/4] Marvell/Armada: Enable variables support Marcin Wojtas
2017-11-09 15:04 ` Leif Lindholm [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20171109150422.z52qvcszi3q2z3ua@bivouac.eciton.net \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox