From: Jian J Wang <jian.j.wang@intel.com>
To: edk2-devel@lists.01.org
Cc: Star Zeng <star.zeng@intel.com>, Eric Dong <eric.dong@intel.com>,
Jiewen Yao <jiewen.yao@intel.com>, Ruiyu Ni <ruiyu.ni@intel.com>
Subject: [PATCH v5 2/7] MdeModulePkg/SmmMemoryAttribute.h: Add new protocol definitions
Date: Fri, 10 Nov 2017 13:19:19 +0800 [thread overview]
Message-ID: <20171110051924.14064-3-jian.j.wang@intel.com> (raw)
In-Reply-To: <20171110051924.14064-1-jian.j.wang@intel.com>
> v5
> a. Remove EFI wording in comment for SMM memory attribute protocol.
> b. Change parameter modifier from IN to OUT
The new protocol gEdkiiSmmMemoryAttributeProtocolGuid is intended for
PiSmmCore to be able to change memory page attributes for the sake of
heap guard feature.
This protocol provides three interfaces to get/set/clear page attribute.
struct _EDKII_SMM_MEMORY_ATTRIBUTE_PROTOCOL {
EDKII_SMM_GET_MEMORY_ATTRIBUTES GetMemoryAttributes;
EDKII_SMM_SET_MEMORY_ATTRIBUTES SetMemoryAttributes;
EDKII_SMM_CLEAR_MEMORY_ATTRIBUTES ClearMemoryAttributes;
};
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Suggested-by: Ayellet Wolman <ayellet.wolman@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
---
MdeModulePkg/Include/Protocol/SmmMemoryAttribute.h | 136 +++++++++++++++++++++
1 file changed, 136 insertions(+)
create mode 100644 MdeModulePkg/Include/Protocol/SmmMemoryAttribute.h
diff --git a/MdeModulePkg/Include/Protocol/SmmMemoryAttribute.h b/MdeModulePkg/Include/Protocol/SmmMemoryAttribute.h
new file mode 100644
index 0000000000..a8c10c07b4
--- /dev/null
+++ b/MdeModulePkg/Include/Protocol/SmmMemoryAttribute.h
@@ -0,0 +1,136 @@
+/** @file
+ EFI SMM Memory Attribute Protocol provides retrieval and update service
+ for memory attributes in EFI SMM environment.
+
+ Copyright (c) 2017, Intel Corporation. All rights reserved.<BR>
+ This program and the accompanying materials
+ are licensed and made available under the terms and conditions of the BSD License
+ which accompanies this distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+#ifndef __SMM_MEMORYATTRIBUTE_H__
+#define __SMM_MEMORYATTRIBUTE_H__
+
+//{69B792EA-39CE-402D-A2A6-F721DE351DFE}
+#define EDKII_SMM_MEMORY_ATTRIBUTE_PROTOCOL_GUID \
+ { \
+ 0x69b792ea, 0x39ce, 0x402d, { 0xa2, 0xa6, 0xf7, 0x21, 0xde, 0x35, 0x1d, 0xfe } \
+ }
+
+typedef struct _EDKII_SMM_MEMORY_ATTRIBUTE_PROTOCOL EDKII_SMM_MEMORY_ATTRIBUTE_PROTOCOL;
+
+/**
+ This function set given attributes of the memory region specified by
+ BaseAddress and Length.
+
+ @param This The EDKII_SMM_MEMORY_ATTRIBUTE_PROTOCOL instance.
+ @param BaseAddress The physical address that is the start address of
+ a memory region.
+ @param Length The size in bytes of the memory region.
+ @param Attributes The bit mask of attributes to set for the memory
+ region.
+
+ @retval EFI_SUCCESS The attributes were set for the memory region.
+ @retval EFI_INVALID_PARAMETER Length is zero.
+ Attributes specified an illegal combination of
+ attributes that cannot be set together.
+ @retval EFI_UNSUPPORTED The processor does not support one or more
+ bytes of the memory resource range specified
+ by BaseAddress and Length.
+ The bit mask of attributes is not support for
+ the memory resource range specified by
+ BaseAddress and Length.
+
+**/
+typedef
+EFI_STATUS
+(EFIAPI *EDKII_SMM_SET_MEMORY_ATTRIBUTES)(
+ IN EDKII_SMM_MEMORY_ATTRIBUTE_PROTOCOL *This,
+ IN EFI_PHYSICAL_ADDRESS BaseAddress,
+ IN UINT64 Length,
+ IN UINT64 Attributes
+ );
+
+/**
+ This function clears given attributes of the memory region specified by
+ BaseAddress and Length.
+
+ @param This The EDKII_SMM_MEMORY_ATTRIBUTE_PROTOCOL instance.
+ @param BaseAddress The physical address that is the start address of
+ a memory region.
+ @param Length The size in bytes of the memory region.
+ @param Attributes The bit mask of attributes to set for the memory
+ region.
+
+ @retval EFI_SUCCESS The attributes were set for the memory region.
+ @retval EFI_INVALID_PARAMETER Length is zero.
+ Attributes specified an illegal combination of
+ attributes that cannot be set together.
+ @retval EFI_UNSUPPORTED The processor does not support one or more
+ bytes of the memory resource range specified
+ by BaseAddress and Length.
+ The bit mask of attributes is not support for
+ the memory resource range specified by
+ BaseAddress and Length.
+
+**/
+typedef
+EFI_STATUS
+(EFIAPI *EDKII_SMM_CLEAR_MEMORY_ATTRIBUTES)(
+ IN EDKII_SMM_MEMORY_ATTRIBUTE_PROTOCOL *This,
+ IN EFI_PHYSICAL_ADDRESS BaseAddress,
+ IN UINT64 Length,
+ IN UINT64 Attributes
+ );
+
+/**
+ This function retrieve the attributes of the memory region specified by
+ BaseAddress and Length. If different attributes are got from different part
+ of the memory region, EFI_NO_MAPPING will be returned.
+
+ @param This The EDKII_SMM_MEMORY_ATTRIBUTE_PROTOCOL instance.
+ @param BaseAddress The physical address that is the start address of
+ a memory region.
+ @param Length The size in bytes of the memory region.
+ @param Attributes Pointer to attributes returned.
+
+ @retval EFI_SUCCESS The attributes got for the memory region.
+ @retval EFI_INVALID_PARAMETER Length is zero.
+ Attributes is NULL.
+ @retval EFI_NO_MAPPING Attributes are not consistent cross the memory
+ region.
+ @retval EFI_UNSUPPORTED The processor does not support one or more
+ bytes of the memory resource range specified
+ by BaseAddress and Length.
+ The bit mask of attributes is not support for
+ the memory resource range specified by
+ BaseAddress and Length.
+
+**/
+typedef
+EFI_STATUS
+(EFIAPI *EDKII_SMM_GET_MEMORY_ATTRIBUTES)(
+ IN EDKII_SMM_MEMORY_ATTRIBUTE_PROTOCOL *This,
+ IN EFI_PHYSICAL_ADDRESS BaseAddress,
+ IN UINT64 Length,
+ OUT UINT64 *Attributes
+ );
+
+///
+/// SMM Memory Attribute Protocol provides services to retrieve or update
+/// attribute of memory in the EFI SMM environment.
+///
+struct _EDKII_SMM_MEMORY_ATTRIBUTE_PROTOCOL {
+ EDKII_SMM_GET_MEMORY_ATTRIBUTES GetMemoryAttributes;
+ EDKII_SMM_SET_MEMORY_ATTRIBUTES SetMemoryAttributes;
+ EDKII_SMM_CLEAR_MEMORY_ATTRIBUTES ClearMemoryAttributes;
+};
+
+extern EFI_GUID gEdkiiSmmMemoryAttributeProtocolGuid;
+
+#endif
--
2.14.1.windows.1
next prev parent reply other threads:[~2017-11-10 5:15 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-11-10 5:19 [PATCH v5 0/7] Implement heap guard feature Jian J Wang
2017-11-10 5:19 ` [PATCH v5 1/7] MdeModulePkg/MdeModulePkg.dec, .uni: Add Protocol, PCDs and string tokens Jian J Wang
2017-11-10 5:19 ` Jian J Wang [this message]
2017-11-10 5:19 ` [PATCH v5 3/7] UefiCpuPkg/CpuDxe: Reduce debug message Jian J Wang
2017-11-10 5:19 ` [PATCH v5 4/7] MdeModulePkg/DxeIpl: Enable paging for heap guard Jian J Wang
2017-11-10 5:19 ` [PATCH v5 5/7] MdeModulePkg/DxeCore: Implement heap guard feature for UEFI Jian J Wang
2017-11-11 21:50 ` Ard Biesheuvel
2017-11-13 3:08 ` Wang, Jian J
2017-11-13 7:12 ` Wang, Jian J
2017-11-10 5:19 ` [PATCH v5 6/7] UefiCpuPkg/PiSmmCpuDxeSmm: Add SmmMemoryAttribute protocol Jian J Wang
2017-11-10 5:19 ` [PATCH v5 7/7] MdeModulePkg/PiSmmCore: Implement heap guard feature for SMM mode Jian J Wang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20171110051924.14064-3-jian.j.wang@intel.com \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox