From: Ard Biesheuvel <ard.biesheuvel@linaro.org>
To: edk2-devel@lists.01.org, leif.lindholm@linaro.org,
daniel.thompson@linaro.org
Cc: masami.hiramatsu@linaro.org, methavanitpong.pipat@socionext.com,
masahisa.kojima@linaro.org,
Ard Biesheuvel <ard.biesheuvel@linaro.org>
Subject: [PATCH edk2-platforms v4 27/34] Silicon/SynQuacerMemoryInitPeiLib: ignore capsules when clearing NVRAM
Date: Fri, 10 Nov 2017 14:21:20 +0000 [thread overview]
Message-ID: <20171110142127.12018-28-ard.biesheuvel@linaro.org> (raw)
In-Reply-To: <20171110142127.12018-1-ard.biesheuvel@linaro.org>
In preparation of adding support for setting a DIP switch to clear the
EFI variable store, update the early capsule handling logic to take the
boot mode into account.
This is necessary for two reasons:
- we override the boot mode when a capsule is detected,
- the capsule detection itself involves reading a EFI variable, which we
shouldn't be doing if the varstore may be in a bad state.
So factor out the initial capsule check (to keep the code understandable)
and only perform it if we are not booting in 'clear NVRAM' mode.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
---
Silicon/Socionext/SynQuacer/Library/SynQuacerMemoryInitPeiLib/SynQuacerMemoryInitPeiLib.c | 68 +++++++++++++-------
1 file changed, 45 insertions(+), 23 deletions(-)
diff --git a/Silicon/Socionext/SynQuacer/Library/SynQuacerMemoryInitPeiLib/SynQuacerMemoryInitPeiLib.c b/Silicon/Socionext/SynQuacer/Library/SynQuacerMemoryInitPeiLib/SynQuacerMemoryInitPeiLib.c
index b44c58d61062..63c441872da7 100644
--- a/Silicon/Socionext/SynQuacer/Library/SynQuacerMemoryInitPeiLib/SynQuacerMemoryInitPeiLib.c
+++ b/Silicon/Socionext/SynQuacer/Library/SynQuacerMemoryInitPeiLib/SynQuacerMemoryInitPeiLib.c
@@ -170,6 +170,44 @@ DeclareDram (
return EFI_SUCCESS;
}
+STATIC
+BOOLEAN
+CheckCapsule (
+ IN EFI_PEI_SERVICES **PeiServices,
+ IN PEI_CAPSULE_PPI *Capsule,
+ IN EFI_PHYSICAL_ADDRESS UefiMemoryBase,
+ OUT VOID **CapsuleBuffer,
+ OUT UINTN *CapsuleBufferLength
+ )
+{
+ EFI_STATUS Status;
+
+ Status = Capsule->CheckCapsuleUpdate (PeiServices);
+ if (!EFI_ERROR (Status)) {
+
+ //
+ // Coalesce the capsule into unused memory. CreateState() below will copy
+ // it to a properly allocated buffer.
+ //
+ *CapsuleBuffer = (VOID *)PcdGet64 (PcdSystemMemoryBase);
+ *CapsuleBufferLength = UefiMemoryBase - PcdGet64 (PcdSystemMemoryBase);
+
+ PeiServicesSetBootMode (BOOT_ON_FLASH_UPDATE);
+
+ Status = Capsule->Coalesce (PeiServices, CapsuleBuffer,
+ CapsuleBufferLength);
+ if (!EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_INFO, "%a: Coalesced capsule @ %p (0x%lx)\n",
+ __FUNCTION__, *CapsuleBuffer, *CapsuleBufferLength));
+ return TRUE;
+ } else {
+ DEBUG ((DEBUG_WARN, "%a: failed to coalesce() capsule (Status == %r)\n",
+ __FUNCTION__, Status));
+ }
+ }
+ return FALSE;
+}
+
EFI_STATUS
EFIAPI
MemoryPeim (
@@ -184,6 +222,7 @@ MemoryPeim (
VOID *CapsuleBuffer;
UINTN CapsuleBufferLength;
BOOLEAN HaveCapsule;
+ EFI_BOOT_MODE BootMode;
Status = DeclareDram (&VirtualMemoryTable);
ASSERT_EFI_ERROR (Status);
@@ -199,31 +238,14 @@ MemoryPeim (
ASSERT_EFI_ERROR (Status);
//
- // Check for persistent capsules
+ // Check for persistent capsules, unless we are booting with default
+ // settings.
//
HaveCapsule = FALSE;
- Status = Capsule->CheckCapsuleUpdate (PeiServices);
- if (!EFI_ERROR (Status)) {
-
- //
- // Coalesce the capsule into unused memory. CreateState() below will copy
- // it to a properly allocated buffer.
- //
- CapsuleBuffer = (VOID *)PcdGet64 (PcdSystemMemoryBase);
- CapsuleBufferLength = UefiMemoryBase - PcdGet64 (PcdSystemMemoryBase);
-
- PeiServicesSetBootMode (BOOT_ON_FLASH_UPDATE);
-
- Status = Capsule->Coalesce (PeiServices, &CapsuleBuffer,
- &CapsuleBufferLength);
- if (!EFI_ERROR (Status)) {
- DEBUG ((DEBUG_INFO, "%a: Coalesced capsule @ %p (0x%lx)\n",
- __FUNCTION__, CapsuleBuffer, CapsuleBufferLength));
- HaveCapsule = TRUE;
- } else {
- DEBUG ((DEBUG_WARN, "%a: failed to coalesce() capsule (Status == %r)\n",
- __FUNCTION__, Status));
- }
+ Status = PeiServicesGetBootMode (&BootMode);
+ if (!EFI_ERROR (Status) && BootMode != BOOT_WITH_DEFAULT_SETTINGS) {
+ HaveCapsule = CheckCapsule (PeiServices, Capsule, UefiMemoryBase,
+ &CapsuleBuffer, &CapsuleBufferLength);
}
Status = ArmConfigureMmu (VirtualMemoryTable, NULL, NULL);
--
2.11.0
next prev parent reply other threads:[~2017-11-10 14:18 UTC|newest]
Thread overview: 53+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-11-10 14:20 [PATCH edk2-platforms v4 00/34] add support for Socionext SynQuacer Ard Biesheuvel
2017-11-10 14:20 ` [PATCH edk2-platforms v4 01/34] Silicon/SynQuacer: add package with platform headers Ard Biesheuvel
2017-11-10 14:20 ` [PATCH edk2-platforms v4 02/34] Silicon/Socionext: add driver for NETSEC network controller Ard Biesheuvel
2017-11-10 14:20 ` [PATCH edk2-platforms v4 03/34] Silicon/Socionext: add PlatformPeilib implementation for SynQuacer Ard Biesheuvel
2017-11-10 14:20 ` [PATCH edk2-platforms v4 04/34] Silicon/SynQuacer: implement a platform DXE driver Ard Biesheuvel
2017-11-10 14:20 ` [PATCH edk2-platforms v4 05/34] Silicon/SynQuacer: add MemoryInitPeiLib implementation Ard Biesheuvel
2017-11-10 14:20 ` [PATCH edk2-platforms v4 06/34] Platform: add support for Socionext SynQuacer eval board Ard Biesheuvel
2017-11-10 14:21 ` [PATCH edk2-platforms v4 07/34] Silicon/SynQuacer: implement PciSegmentLib to support dual RCs Ard Biesheuvel
2017-11-10 14:21 ` [PATCH edk2-platforms v4 08/34] Silicon/SynQuacer: implement PciHostBridgeLib support Ard Biesheuvel
2017-11-10 14:21 ` [PATCH edk2-platforms v4 09/34] Silicon/SynQuacer: implement EFI_CPU_IO2_PROTOCOL Ard Biesheuvel
2017-11-10 14:21 ` [PATCH edk2-platforms v4 10/34] Platform/SynQuacerEvalBoard: add PCI support Ard Biesheuvel
2017-11-10 14:21 ` [PATCH edk2-platforms v4 11/34] Platform/SynQuacerEvalBoard: add NETSEC driver Ard Biesheuvel
2017-11-10 14:21 ` [PATCH edk2-platforms v4 12/34] Silicon/SynQuacer: add device tree support for eval board Ard Biesheuvel
2017-11-10 14:21 ` [PATCH edk2-platforms v4 13/34] Silicon/SynQuacer: add NorFlashPlatformLib implementation Ard Biesheuvel
2017-11-10 14:21 ` [PATCH edk2-platforms v4 14/34] Silicon/Socionext: add driver for SPI NOR flash Ard Biesheuvel
2017-11-17 15:08 ` Leif Lindholm
2017-11-10 14:21 ` [PATCH edk2-platforms v4 15/34] Platform/SynQuacer: incorporate NOR flash and variable drivers Ard Biesheuvel
2017-11-10 14:21 ` [PATCH edk2-platforms v4 16/34] Silicon/SynQuacer: implement PlatformFlashAccessLib Ard Biesheuvel
2017-11-10 14:21 ` [PATCH edk2-platforms v4 17/34] SynQuacer/SynQuacerMemoryInitPeiLib: add capsule support Ard Biesheuvel
2017-11-10 14:21 ` [PATCH edk2-platforms v4 18/34] Socionext/SynQuacerEvalBoard: wire up basic " Ard Biesheuvel
2017-11-10 14:21 ` [PATCH edk2-platforms v4 19/34] Socionext/SynQuacerEvalBoard: switch to execute in place Ard Biesheuvel
2017-11-10 14:21 ` [PATCH edk2-platforms v4 20/34] Platform/SynQuacerEvalBoard: add signed capsule update support Ard Biesheuvel
2017-11-10 14:21 ` [PATCH edk2-platforms v4 21/34] Silicon/SynQuacerPciHostBridgeLib: add workaround to support 32-bit only cards Ard Biesheuvel
2017-11-10 14:21 ` [PATCH edk2-platforms v4 22/34] Platform/Socionext: add support for Socionext Developer Box rev 0.1 Ard Biesheuvel
2017-11-10 14:21 ` [PATCH edk2-platforms v4 23/34] Platform/DeveloperBox: add ConsolePrefDxe driver Ard Biesheuvel
2017-11-10 14:21 ` [PATCH edk2-platforms v4 24/34] Silicon/SynQuacer: add description of GPIO block to device tree Ard Biesheuvel
2017-11-10 14:21 ` [PATCH edk2-platforms v4 25/34] Silicon/SynQuacer: add description of EXIU to the " Ard Biesheuvel
2017-11-10 14:21 ` [PATCH edk2-platforms v4 26/34] Silicon/SynQuacer: add DT description of the SDHCI controller Ard Biesheuvel
2017-11-17 15:16 ` Leif Lindholm
2017-11-17 15:18 ` Ard Biesheuvel
2017-11-10 14:21 ` Ard Biesheuvel [this message]
2017-11-17 15:23 ` [PATCH edk2-platforms v4 27/34] Silicon/SynQuacerMemoryInitPeiLib: ignore capsules when clearing NVRAM Leif Lindholm
2017-11-10 14:21 ` [PATCH edk2-platforms v4 28/34] Silicon/SynQuacer: implement PEIM that exposes GPIO PPI Ard Biesheuvel
2017-11-17 15:46 ` Leif Lindholm
2017-11-10 14:21 ` [PATCH edk2-platforms v4 29/34] Silicon/SynQuacer: implement 'clear NVRAM' feature using a DIP switch Ard Biesheuvel
2017-11-17 15:51 ` Leif Lindholm
2017-11-17 15:53 ` Ard Biesheuvel
2017-11-17 16:10 ` Leif Lindholm
2017-11-17 17:42 ` Ard Biesheuvel
2017-11-23 12:51 ` Leif Lindholm
2017-11-10 14:21 ` [PATCH edk2-platforms v4 30/34] Silicon/NXP: add RTC support library for PCF8563 I2C IP Ard Biesheuvel
2017-11-17 16:39 ` Leif Lindholm
2017-11-17 16:49 ` Ard Biesheuvel
2017-11-10 14:21 ` [PATCH edk2-platforms v4 31/34] Silicon/Socionext: implement I2C master protocol for SynQuacer I2C Ard Biesheuvel
2017-11-17 17:05 ` Leif Lindholm
2017-11-10 14:21 ` [PATCH edk2-platforms v4 32/34] Platform/DeveloperBox: wire up RTC support Ard Biesheuvel
2017-11-10 14:21 ` [PATCH edk2-platforms v4 33/34] Platform/DeveloperBox: add description of power button to DT Ard Biesheuvel
2017-11-17 17:06 ` Leif Lindholm
2017-11-10 14:21 ` [PATCH edk2-platforms v4 34/34] Platform/SynQuacerEvalBoard: add eMMC driver stack Ard Biesheuvel
2017-11-17 17:18 ` Leif Lindholm
2017-11-17 17:25 ` Ard Biesheuvel
2017-11-17 17:33 ` Leif Lindholm
2017-11-17 17:35 ` Ard Biesheuvel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20171110142127.12018-28-ard.biesheuvel@linaro.org \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox