public inbox for devel@edk2.groups.io
 help / color / mirror / Atom feed
* [PATCH] [edk2-platforms]: Adding usb Host driver support from OpenPlatformPkg hikey-wip branch
@ 2017-11-20 10:25 kalyan-nagabhirava
  2017-11-25 15:00 ` Leif Lindholm
  0 siblings, 1 reply; 2+ messages in thread
From: kalyan-nagabhirava @ 2017-11-20 10:25 UTC (permalink / raw)
  To: edk2-devel, ard.biesheuvel, leif.lindholm
  Cc: mark.gregotski, peter.griffin, kalyan-nagabhirava

Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: kalyan-nagabhirava <kalyankumar.nagabhirava@linaro.org>
---
 Platform/Hisilicon/HiKey/HiKey.dec                 |    4 +
 Platform/Hisilicon/HiKey/HiKey.dsc                 |   11 +
 Platform/Hisilicon/HiKey/HiKey.fdf                 |    3 +
 .../Include/Library/UncachedMemoryAllocationLib.h  |  665 ++++++
 .../Hisilicon/HiKey/Library/ArmDmaLib/ArmDmaLib.c  |  342 +++
 .../HiKey/Library/ArmDmaLib/ArmDmaLib.inf          |   50 +
 .../UncachedMemoryAllocationLib.c                  |  692 ++++++
 .../UncachedMemoryAllocationLib.inf                |   45 +
 Silicon/Synopsys/Usb/DwNonPci/DwNonPciUsbDxe.inf   |   47 +
 Silicon/Synopsys/Usb/DwNonPci/InitController.c     |   37 +
 Silicon/Synopsys/Usb/DwUsbDxe/ComponentName.c      |  244 ++
 Silicon/Synopsys/Usb/DwUsbDxe/ComponentName.h      |  148 ++
 Silicon/Synopsys/Usb/DwUsbDxe/DwUsbDxe.c           | 2324 ++++++++++++++++++++
 Silicon/Synopsys/Usb/DwUsbDxe/DwUsbDxe.dec         |   42 +
 Silicon/Synopsys/Usb/DwUsbDxe/DwUsbDxe.h           |  534 +++++
 Silicon/Synopsys/Usb/DwUsbDxe/DwUsbDxe.inf         |   60 +
 Silicon/Synopsys/Usb/DwUsbHostDxe/ComponentName.c  |  243 ++
 Silicon/Synopsys/Usb/DwUsbHostDxe/ComponentName.h  |  148 ++
 Silicon/Synopsys/Usb/DwUsbHostDxe/DwUsbHostDxe.c   | 2043 +++++++++++++++++
 Silicon/Synopsys/Usb/DwUsbHostDxe/DwUsbHostDxe.h   |  121 +
 Silicon/Synopsys/Usb/DwUsbHostDxe/DwUsbHostDxe.inf |   61 +
 Silicon/Synopsys/Usb/DwUsbHostDxe/DwcHw.h          |  792 +++++++
 22 files changed, 8656 insertions(+)
 create mode 100644 Platform/Hisilicon/HiKey/Include/Library/UncachedMemoryAllocationLib.h
 create mode 100644 Platform/Hisilicon/HiKey/Library/ArmDmaLib/ArmDmaLib.c
 create mode 100644 Platform/Hisilicon/HiKey/Library/ArmDmaLib/ArmDmaLib.inf
 create mode 100644 Platform/Hisilicon/HiKey/Library/UncachedMemoryAllocationLib/UncachedMemoryAllocationLib.c
 create mode 100644 Platform/Hisilicon/HiKey/Library/UncachedMemoryAllocationLib/UncachedMemoryAllocationLib.inf
 create mode 100644 Silicon/Synopsys/Usb/DwNonPci/DwNonPciUsbDxe.inf
 create mode 100644 Silicon/Synopsys/Usb/DwNonPci/InitController.c
 create mode 100644 Silicon/Synopsys/Usb/DwUsbDxe/ComponentName.c
 create mode 100644 Silicon/Synopsys/Usb/DwUsbDxe/ComponentName.h
 create mode 100644 Silicon/Synopsys/Usb/DwUsbDxe/DwUsbDxe.c
 create mode 100644 Silicon/Synopsys/Usb/DwUsbDxe/DwUsbDxe.dec
 create mode 100644 Silicon/Synopsys/Usb/DwUsbDxe/DwUsbDxe.h
 create mode 100644 Silicon/Synopsys/Usb/DwUsbDxe/DwUsbDxe.inf
 create mode 100644 Silicon/Synopsys/Usb/DwUsbHostDxe/ComponentName.c
 create mode 100644 Silicon/Synopsys/Usb/DwUsbHostDxe/ComponentName.h
 create mode 100644 Silicon/Synopsys/Usb/DwUsbHostDxe/DwUsbHostDxe.c
 create mode 100644 Silicon/Synopsys/Usb/DwUsbHostDxe/DwUsbHostDxe.h
 create mode 100644 Silicon/Synopsys/Usb/DwUsbHostDxe/DwUsbHostDxe.inf
 create mode 100644 Silicon/Synopsys/Usb/DwUsbHostDxe/DwcHw.h

diff --git a/Platform/Hisilicon/HiKey/HiKey.dec b/Platform/Hisilicon/HiKey/HiKey.dec
index 537138eb4..a1f610bf0 100644
--- a/Platform/Hisilicon/HiKey/HiKey.dec
+++ b/Platform/Hisilicon/HiKey/HiKey.dec
@@ -34,3 +34,7 @@
 [PcdsFixedAtBuild.common]
   gHiKeyTokenSpaceGuid.PcdAndroidFastbootNvmDevicePath|L""|VOID*|0x00000001
   gHiKeyTokenSpaceGuid.PcdArmFastbootFlashLimit|L""|VOID*|0x00000002
+  
+  # This PCD will free the unallocated buffers if their size reach this threshold.
+  # We set the default value to 512MB.
+  gArmTokenSpaceGuid.PcdArmFreeUncachedMemorySizeThreshold|0x20000000|UINT64|0x00000003
diff --git a/Platform/Hisilicon/HiKey/HiKey.dsc b/Platform/Hisilicon/HiKey/HiKey.dsc
index 2e3b1c879..497361454 100644
--- a/Platform/Hisilicon/HiKey/HiKey.dsc
+++ b/Platform/Hisilicon/HiKey/HiKey.dsc
@@ -109,6 +109,10 @@
 
   # USB Requirements
   UefiUsbLib|MdePkg/Library/UefiUsbLib/UefiUsbLib.inf
+  DmaLib|Platform/Hisilicon/HiKey/Library/ArmDmaLib/ArmDmaLib.inf
+
+  UncachedMemoryAllocationLib|Platform/Hisilicon/HiKey/Library/UncachedMemoryAllocationLib/UncachedMemoryAllocationLib.inf
+  NonDiscoverableDeviceRegistrationLib|MdeModulePkg/Library/NonDiscoverableDeviceRegistrationLib/NonDiscoverableDeviceRegistrationLib.inf
 
   # Network Libraries
   UefiScsiLib|MdePkg/Library/UefiScsiLib/UefiScsiLib.inf
@@ -330,7 +334,11 @@
   gEmbeddedTokenSpaceGuid.PcdDwEmmcDxeBaseAddress|0xF723D000
   gEmbeddedTokenSpaceGuid.PcdDwEmmcDxeClockFrequencyInHz|100000000
 
+  # DW USB controller
   #
+  gDwUsbDxeTokenSpaceGuid.PcdDwUsbBaseAddress|0xF72c0000
+  gDwUsbDxeTokenSpaceGuid.PcdDwUsbSysCtrlBaseAddress|0xF7030000
+
   #
   # Fastboot
   #
@@ -399,6 +407,9 @@
   # USB Host Support
   #
   MdeModulePkg/Bus/Usb/UsbBusDxe/UsbBusDxe.inf
+  Silicon/Synopsys/Usb/DwUsbHostDxe/DwUsbHostDxe.inf
+  Silicon/Synopsys/Usb/DwNonPci/DwNonPciUsbDxe.inf
+  MdeModulePkg/Bus/Pci/NonDiscoverablePciDeviceDxe/NonDiscoverablePciDeviceDxe.inf
 
   #
   # USB Mass Storage Support
diff --git a/Platform/Hisilicon/HiKey/HiKey.fdf b/Platform/Hisilicon/HiKey/HiKey.fdf
index d277bd6ce..78ba85399 100644
--- a/Platform/Hisilicon/HiKey/HiKey.fdf
+++ b/Platform/Hisilicon/HiKey/HiKey.fdf
@@ -129,6 +129,9 @@ READ_LOCK_STATUS   = TRUE
   # USB Host Support
   #
   INF MdeModulePkg/Bus/Usb/UsbBusDxe/UsbBusDxe.inf
+  INF Silicon/Synopsys/Usb/DwUsbHostDxe/DwUsbHostDxe.inf
+  INF Silicon/Synopsys/Usb/DwNonPci/DwNonPciUsbDxe.inf
+  INF MdeModulePkg/Bus/Pci/NonDiscoverablePciDeviceDxe/NonDiscoverablePciDeviceDxe.inf
 
   #
   # USB Mass Storage Support
diff --git a/Platform/Hisilicon/HiKey/Include/Library/UncachedMemoryAllocationLib.h b/Platform/Hisilicon/HiKey/Include/Library/UncachedMemoryAllocationLib.h
new file mode 100644
index 000000000..a49d8d3ac
--- /dev/null
+++ b/Platform/Hisilicon/HiKey/Include/Library/UncachedMemoryAllocationLib.h
@@ -0,0 +1,665 @@
+/** @file
+
+  Copyright (c) 2008 - 2009, Apple Inc. All rights reserved.<BR>
+
+  This program and the accompanying materials
+  are licensed and made available under the terms and conditions of the BSD License
+  which accompanies this distribution.  The full text of the license may be found at
+  http://opensource.org/licenses/bsd-license.php
+
+  THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+  WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+#ifndef __UNCACHED_MEMORY_ALLOCATION_LIB_H__
+#define __UNCACHED_MEMORY_ALLOCATION_LIB_H__
+
+/**
+  Converts a cached or uncached address to a physical address suitable for use in SoC registers.
+
+  @param  VirtualAddress                 The pointer to convert.
+
+  @return The physical address of the supplied virtual pointer.
+
+**/
+EFI_PHYSICAL_ADDRESS
+ConvertToPhysicalAddress (
+  IN VOID *VirtualAddress
+  );
+
+/**
+  Converts a cached or uncached address to a cached address.
+
+  @param  Address                 The pointer to convert.
+
+  @return The address of the cached memory location corresponding to the input address.
+
+**/
+VOID *
+ConvertToCachedAddress (
+  IN VOID *Address
+  );
+
+/**
+  Converts a cached or uncached address to an uncached address.
+
+  @param  Address                 The pointer to convert.
+
+  @return The address of the uncached memory location corresponding to the input address.
+
+**/
+VOID *
+ConvertToUncachedAddress (
+  IN VOID *Address
+  );
+
+/**
+  Allocates one or more 4KB pages of type EfiBootServicesData.
+
+  Allocates the number of 4KB pages of type EfiBootServicesData and returns a pointer to the
+  allocated buffer.  The buffer returned is aligned on a 4KB boundary.  If Pages is 0, then NULL
+  is returned.  If there is not enough memory remaining to satisfy the request, then NULL is
+  returned.
+
+  @param  Pages                 The number of 4 KB pages to allocate.
+
+  @return A pointer to the allocated buffer or NULL if allocation fails.
+
+**/
+VOID *
+EFIAPI
+UncachedAllocatePages (
+  IN UINTN  Pages
+  );
+
+/**
+  Allocates one or more 4KB pages of type EfiRuntimeServicesData.
+
+  Allocates the number of 4KB pages of type EfiRuntimeServicesData and returns a pointer to the
+  allocated buffer.  The buffer returned is aligned on a 4KB boundary.  If Pages is 0, then NULL
+  is returned.  If there is not enough memory remaining to satisfy the request, then NULL is
+  returned.
+
+  @param  Pages                 The number of 4 KB pages to allocate.
+
+  @return A pointer to the allocated buffer or NULL if allocation fails.
+
+**/
+VOID *
+EFIAPI
+UncachedAllocateRuntimePages (
+  IN UINTN  Pages
+  );
+
+/**
+  Allocates one or more 4KB pages of type EfiReservedMemoryType.
+
+  Allocates the number of 4KB pages of type EfiReservedMemoryType and returns a pointer to the
+  allocated buffer.  The buffer returned is aligned on a 4KB boundary.  If Pages is 0, then NULL
+  is returned.  If there is not enough memory remaining to satisfy the request, then NULL is
+  returned.
+
+  @param  Pages                 The number of 4 KB pages to allocate.
+
+  @return A pointer to the allocated buffer or NULL if allocation fails.
+
+**/
+VOID *
+EFIAPI
+UncachedAllocateReservedPages (
+  IN UINTN  Pages
+  );
+
+/**
+  Frees one or more 4KB pages that were previously allocated with one of the page allocation
+  functions in the Memory Allocation Library.
+
+  Frees the number of 4KB pages specified by Pages from the buffer specified by Buffer.  Buffer
+  must have been allocated on a previous call to the page allocation services of the Memory
+  Allocation Library.
+  If Buffer was not allocated with a page allocation function in the Memory Allocation Library,
+  then ASSERT().
+  If Pages is zero, then ASSERT().
+
+  @param  Buffer                Pointer to the buffer of pages to free.
+  @param  Pages                 The number of 4 KB pages to free.
+
+**/
+VOID
+EFIAPI
+UncachedFreePages (
+  IN VOID   *Buffer,
+  IN UINTN  Pages
+  );
+
+/**
+  Allocates one or more 4KB pages of type EfiBootServicesData at a specified alignment.
+
+  Allocates the number of 4KB pages specified by Pages of type EfiBootServicesData with an
+  alignment specified by Alignment.  The allocated buffer is returned.  If Pages is 0, then NULL is
+  returned.  If there is not enough memory at the specified alignment remaining to satisfy the
+  request, then NULL is returned.
+  If Alignment is not a power of two and Alignment is not zero, then ASSERT().
+
+  @param  Pages                 The number of 4 KB pages to allocate.
+  @param  Alignment             The requested alignment of the allocation.  Must be a power of two.
+                                If Alignment is zero, then byte alignment is used.
+
+  @return A pointer to the allocated buffer or NULL if allocation fails.
+
+**/
+VOID *
+EFIAPI
+UncachedAllocateAlignedPages (
+  IN UINTN  Pages,
+  IN UINTN  Alignment
+  );
+
+/**
+  Allocates one or more 4KB pages of type EfiRuntimeServicesData at a specified alignment.
+
+  Allocates the number of 4KB pages specified by Pages of type EfiRuntimeServicesData with an
+  alignment specified by Alignment.  The allocated buffer is returned.  If Pages is 0, then NULL is
+  returned.  If there is not enough memory at the specified alignment remaining to satisfy the
+  request, then NULL is returned.
+  If Alignment is not a power of two and Alignment is not zero, then ASSERT().
+
+  @param  Pages                 The number of 4 KB pages to allocate.
+  @param  Alignment             The requested alignment of the allocation.  Must be a power of two.
+                                If Alignment is zero, then byte alignment is used.
+
+  @return A pointer to the allocated buffer or NULL if allocation fails.
+
+**/
+VOID *
+EFIAPI
+UncachedAllocateAlignedRuntimePages (
+  IN UINTN  Pages,
+  IN UINTN  Alignment
+  );
+
+/**
+  Allocates one or more 4KB pages of type EfiReservedMemoryType at a specified alignment.
+
+  Allocates the number of 4KB pages specified by Pages of type EfiReservedMemoryType with an
+  alignment specified by Alignment.  The allocated buffer is returned.  If Pages is 0, then NULL is
+  returned.  If there is not enough memory at the specified alignment remaining to satisfy the
+  request, then NULL is returned.
+  If Alignment is not a power of two and Alignment is not zero, then ASSERT().
+
+  @param  Pages                 The number of 4 KB pages to allocate.
+  @param  Alignment             The requested alignment of the allocation.  Must be a power of two.
+                                If Alignment is zero, then byte alignment is used.
+
+  @return A pointer to the allocated buffer or NULL if allocation fails.
+
+**/
+VOID *
+EFIAPI
+UncachedAllocateAlignedReservedPages (
+  IN UINTN  Pages,
+  IN UINTN  Alignment
+  );
+
+/**
+  Frees one or more 4KB pages that were previously allocated with one of the aligned page
+  allocation functions in the Memory Allocation Library.
+
+  Frees the number of 4KB pages specified by Pages from the buffer specified by Buffer.  Buffer
+  must have been allocated on a previous call to the aligned page allocation services of the Memory
+  Allocation Library.
+  If Buffer was not allocated with an aligned page allocation function in the Memory Allocation
+  Library, then ASSERT().
+  If Pages is zero, then ASSERT().
+
+  @param  Buffer                Pointer to the buffer of pages to free.
+  @param  Pages                 The number of 4 KB pages to free.
+
+**/
+VOID
+EFIAPI
+UncachedFreeAlignedPages (
+  IN VOID   *Buffer,
+  IN UINTN  Pages
+  );
+
+/**
+  Allocates a buffer of type EfiBootServicesData.
+
+  Allocates the number bytes specified by AllocationSize of type EfiBootServicesData and returns a
+  pointer to the allocated buffer.  If AllocationSize is 0, then a valid buffer of 0 size is
+  returned.  If there is not enough memory remaining to satisfy the request, then NULL is returned.
+
+  @param  AllocationSize        The number of bytes to allocate.
+
+  @return A pointer to the allocated buffer or NULL if allocation fails.
+
+**/
+VOID *
+EFIAPI
+UncachedAllocatePool (
+  IN UINTN  AllocationSize
+  );
+
+/**
+  Allocates a buffer of type EfiRuntimeServicesData.
+
+  Allocates the number bytes specified by AllocationSize of type EfiRuntimeServicesData and returns
+  a pointer to the allocated buffer.  If AllocationSize is 0, then a valid buffer of 0 size is
+  returned.  If there is not enough memory remaining to satisfy the request, then NULL is returned.
+
+  @param  AllocationSize        The number of bytes to allocate.
+
+  @return A pointer to the allocated buffer or NULL if allocation fails.
+
+**/
+VOID *
+EFIAPI
+UncachedAllocateRuntimePool (
+  IN UINTN  AllocationSize
+  );
+
+/**
+  Allocates a buffer of type EfieservedMemoryType.
+
+  Allocates the number bytes specified by AllocationSize of type EfieservedMemoryType and returns
+  a pointer to the allocated buffer.  If AllocationSize is 0, then a valid buffer of 0 size is
+  returned.  If there is not enough memory remaining to satisfy the request, then NULL is returned.
+
+  @param  AllocationSize        The number of bytes to allocate.
+
+  @return A pointer to the allocated buffer or NULL if allocation fails.
+
+**/
+VOID *
+EFIAPI
+UncachedAllocateReservedPool (
+  IN UINTN  AllocationSize
+  );
+
+/**
+  Allocates and zeros a buffer of type EfiBootServicesData.
+
+  Allocates the number bytes specified by AllocationSize of type EfiBootServicesData, clears the
+  buffer with zeros, and returns a pointer to the allocated buffer.  If AllocationSize is 0, then a
+  valid buffer of 0 size is returned.  If there is not enough memory remaining to satisfy the
+  request, then NULL is returned.
+
+  @param  AllocationSize        The number of bytes to allocate and zero.
+
+  @return A pointer to the allocated buffer or NULL if allocation fails.
+
+**/
+VOID *
+EFIAPI
+UncachedAllocateZeroPool (
+  IN UINTN  AllocationSize
+  );
+
+/**
+  Allocates and zeros a buffer of type EfiRuntimeServicesData.
+
+  Allocates the number bytes specified by AllocationSize of type EfiRuntimeServicesData, clears the
+  buffer with zeros, and returns a pointer to the allocated buffer.  If AllocationSize is 0, then a
+  valid buffer of 0 size is returned.  If there is not enough memory remaining to satisfy the
+  request, then NULL is returned.
+
+  @param  AllocationSize        The number of bytes to allocate and zero.
+
+  @return A pointer to the allocated buffer or NULL if allocation fails.
+
+**/
+VOID *
+EFIAPI
+UncachedAllocateRuntimeZeroPool (
+  IN UINTN  AllocationSize
+  );
+
+/**
+  Allocates and zeros a buffer of type EfiReservedMemoryType.
+
+  Allocates the number bytes specified by AllocationSize of type EfiReservedMemoryType, clears the
+  buffer with zeros, and returns a pointer to the allocated buffer.  If AllocationSize is 0, then a
+  valid buffer of 0 size is returned.  If there is not enough memory remaining to satisfy the
+  request, then NULL is returned.
+
+  @param  AllocationSize        The number of bytes to allocate and zero.
+
+  @return A pointer to the allocated buffer or NULL if allocation fails.
+
+**/
+VOID *
+EFIAPI
+UncachedAllocateReservedZeroPool (
+  IN UINTN  AllocationSize
+  );
+
+/**
+  Copies a buffer to an allocated buffer of type EfiBootServicesData.
+
+  Allocates the number bytes specified by AllocationSize of type EfiBootServicesData, copies
+  AllocationSize bytes from Buffer to the newly allocated buffer, and returns a pointer to the
+  allocated buffer.  If AllocationSize is 0, then a valid buffer of 0 size is returned.  If there
+  is not enough memory remaining to satisfy the request, then NULL is returned.
+  If Buffer is NULL, then ASSERT().
+  If AllocationSize is greater than (MAX_ADDRESS ? Buffer + 1), then ASSERT().
+
+  @param  AllocationSize        The number of bytes to allocate and zero.
+  @param  Buffer                The buffer to copy to the allocated buffer.
+
+  @return A pointer to the allocated buffer or NULL if allocation fails.
+
+**/
+VOID *
+EFIAPI
+UncachedAllocateCopyPool (
+  IN UINTN       AllocationSize,
+  IN CONST VOID  *Buffer
+  );
+
+/**
+  Copies a buffer to an allocated buffer of type EfiRuntimeServicesData.
+
+  Allocates the number bytes specified by AllocationSize of type EfiRuntimeServicesData, copies
+  AllocationSize bytes from Buffer to the newly allocated buffer, and returns a pointer to the
+  allocated buffer.  If AllocationSize is 0, then a valid buffer of 0 size is returned.  If there
+  is not enough memory remaining to satisfy the request, then NULL is returned.
+  If Buffer is NULL, then ASSERT().
+  If AllocationSize is greater than (MAX_ADDRESS ? Buffer + 1), then ASSERT().
+
+  @param  AllocationSize        The number of bytes to allocate and zero.
+  @param  Buffer                The buffer to copy to the allocated buffer.
+
+  @return A pointer to the allocated buffer or NULL if allocation fails.
+
+**/
+VOID *
+EFIAPI
+UncachedAllocateRuntimeCopyPool (
+  IN UINTN       AllocationSize,
+  IN CONST VOID  *Buffer
+  );
+
+/**
+  Copies a buffer to an allocated buffer of type EfiReservedMemoryType.
+
+  Allocates the number bytes specified by AllocationSize of type EfiReservedMemoryType, copies
+  AllocationSize bytes from Buffer to the newly allocated buffer, and returns a pointer to the
+  allocated buffer.  If AllocationSize is 0, then a valid buffer of 0 size is returned.  If there
+  is not enough memory remaining to satisfy the request, then NULL is returned.
+  If Buffer is NULL, then ASSERT().
+  If AllocationSize is greater than (MAX_ADDRESS ? Buffer + 1), then ASSERT().
+
+  @param  AllocationSize        The number of bytes to allocate and zero.
+  @param  Buffer                The buffer to copy to the allocated buffer.
+
+  @return A pointer to the allocated buffer or NULL if allocation fails.
+
+**/
+VOID *
+EFIAPI
+UncachedAllocateReservedCopyPool (
+  IN UINTN       AllocationSize,
+  IN CONST VOID  *Buffer
+  );
+
+/**
+  Frees a buffer that was previously allocated with one of the pool allocation functions in the
+  Memory Allocation Library.
+
+  Frees the buffer specified by Buffer.  Buffer must have been allocated on a previous call to the
+  pool allocation services of the Memory Allocation Library.
+  If Buffer was not allocated with a pool allocation function in the Memory Allocation Library,
+  then ASSERT().
+
+  @param  Buffer                Pointer to the buffer to free.
+
+**/
+VOID
+EFIAPI
+UncachedFreePool (
+  IN VOID   *Buffer
+  );
+
+/**
+  Allocates a buffer of type EfiBootServicesData at a specified alignment.
+
+  Allocates the number bytes specified by AllocationSize of type EfiBootServicesData with an
+  alignment specified by Alignment.  The allocated buffer is returned.  If AllocationSize is 0,
+  then a valid buffer of 0 size is returned.  If there is not enough memory at the specified
+  alignment remaining to satisfy the request, then NULL is returned.
+  If Alignment is not a power of two and Alignment is not zero, then ASSERT().
+
+  @param  AllocationSize        The number of bytes to allocate.
+  @param  Alignment             The requested alignment of the allocation.  Must be a power of two.
+                                If Alignment is zero, then byte alignment is used.
+
+  @return A pointer to the allocated buffer or NULL if allocation fails.
+
+**/
+VOID *
+EFIAPI
+UncachedAllocateAlignedPool (
+  IN UINTN  AllocationSize,
+  IN UINTN  Alignment
+  );
+
+/**
+  Allocates a buffer of type EfiRuntimeServicesData at a specified alignment.
+
+  Allocates the number bytes specified by AllocationSize of type EfiRuntimeServicesData with an
+  alignment specified by Alignment.  The allocated buffer is returned.  If AllocationSize is 0,
+  then a valid buffer of 0 size is returned.  If there is not enough memory at the specified
+  alignment remaining to satisfy the request, then NULL is returned.
+  If Alignment is not a power of two and Alignment is not zero, then ASSERT().
+
+  @param  AllocationSize        The number of bytes to allocate.
+  @param  Alignment             The requested alignment of the allocation.  Must be a power of two.
+                                If Alignment is zero, then byte alignment is used.
+
+  @return A pointer to the allocated buffer or NULL if allocation fails.
+
+**/
+VOID *
+EFIAPI
+UncachedAllocateAlignedRuntimePool (
+  IN UINTN  AllocationSize,
+  IN UINTN  Alignment
+  );
+
+/**
+  Allocates a buffer of type EfieservedMemoryType at a specified alignment.
+
+  Allocates the number bytes specified by AllocationSize of type EfieservedMemoryType with an
+  alignment specified by Alignment.  The allocated buffer is returned.  If AllocationSize is 0,
+  then a valid buffer of 0 size is returned.  If there is not enough memory at the specified
+  alignment remaining to satisfy the request, then NULL is returned.
+  If Alignment is not a power of two and Alignment is not zero, then ASSERT().
+
+  @param  AllocationSize        The number of bytes to allocate.
+  @param  Alignment             The requested alignment of the allocation.  Must be a power of two.
+                                If Alignment is zero, then byte alignment is used.
+
+  @return A pointer to the allocated buffer or NULL if allocation fails.
+
+**/
+VOID *
+EFIAPI
+UncachedAllocateAlignedReservedPool (
+  IN UINTN  AllocationSize,
+  IN UINTN  Alignment
+  );
+
+/**
+  Allocates and zeros a buffer of type EfiBootServicesData at a specified alignment.
+
+  Allocates the number bytes specified by AllocationSize of type EfiBootServicesData with an
+  alignment specified by Alignment, clears the buffer with zeros, and returns a pointer to the
+  allocated buffer.  If AllocationSize is 0, then a valid buffer of 0 size is returned.  If there
+  is not enough memory at the specified alignment remaining to satisfy the request, then NULL is
+  returned.
+  If Alignment is not a power of two and Alignment is not zero, then ASSERT().
+
+  @param  AllocationSize        The number of bytes to allocate.
+  @param  Alignment             The requested alignment of the allocation.  Must be a power of two.
+                                If Alignment is zero, then byte alignment is used.
+
+  @return A pointer to the allocated buffer or NULL if allocation fails.
+
+**/
+VOID *
+EFIAPI
+UncachedAllocateAlignedZeroPool (
+  IN UINTN  AllocationSize,
+  IN UINTN  Alignment
+  );
+
+/**
+  Allocates and zeros a buffer of type EfiRuntimeServicesData at a specified alignment.
+
+  Allocates the number bytes specified by AllocationSize of type EfiRuntimeServicesData with an
+  alignment specified by Alignment, clears the buffer with zeros, and returns a pointer to the
+  allocated buffer.  If AllocationSize is 0, then a valid buffer of 0 size is returned.  If there
+  is not enough memory at the specified alignment remaining to satisfy the request, then NULL is
+  returned.
+  If Alignment is not a power of two and Alignment is not zero, then ASSERT().
+
+  @param  AllocationSize        The number of bytes to allocate.
+  @param  Alignment             The requested alignment of the allocation.  Must be a power of two.
+                                If Alignment is zero, then byte alignment is used.
+
+  @return A pointer to the allocated buffer or NULL if allocation fails.
+
+**/
+VOID *
+EFIAPI
+UncachedAllocateAlignedRuntimeZeroPool (
+  IN UINTN  AllocationSize,
+  IN UINTN  Alignment
+  );
+
+/**
+  Allocates and zeros a buffer of type EfieservedMemoryType at a specified alignment.
+
+  Allocates the number bytes specified by AllocationSize of type EfieservedMemoryType with an
+  alignment specified by Alignment, clears the buffer with zeros, and returns a pointer to the
+  allocated buffer.  If AllocationSize is 0, then a valid buffer of 0 size is returned.  If there
+  is not enough memory at the specified alignment remaining to satisfy the request, then NULL is
+  returned.
+  If Alignment is not a power of two and Alignment is not zero, then ASSERT().
+
+  @param  AllocationSize        The number of bytes to allocate.
+  @param  Alignment             The requested alignment of the allocation.  Must be a power of two.
+                                If Alignment is zero, then byte alignment is used.
+
+  @return A pointer to the allocated buffer or NULL if allocation fails.
+
+**/
+VOID *
+EFIAPI
+UncachedAllocateAlignedReservedZeroPool (
+  IN UINTN  AllocationSize,
+  IN UINTN  Alignment
+  );
+
+/**
+  Copies a buffer to an allocated buffer of type EfiBootServicesData at a specified alignment.
+
+  Allocates the number bytes specified by AllocationSize of type EfiBootServicesData type with an
+  alignment specified by Alignment.  The allocated buffer is returned.  If AllocationSize is 0,
+  then a valid buffer of 0 size is returned.  If there is not enough memory at the specified
+  alignment remaining to satisfy the request, then NULL is returned.
+  If Alignment is not a power of two and Alignment is not zero, then ASSERT().
+
+  @param  AllocationSize        The number of bytes to allocate.
+  @param  Buffer                The buffer to copy to the allocated buffer.
+  @param  Alignment             The requested alignment of the allocation.  Must be a power of two.
+                                If Alignment is zero, then byte alignment is used.
+
+  @return A pointer to the allocated buffer or NULL if allocation fails.
+
+**/
+VOID *
+EFIAPI
+UncachedAllocateAlignedCopyPool (
+  IN UINTN       AllocationSize,
+  IN CONST VOID  *Buffer,
+  IN UINTN       Alignment
+  );
+
+/**
+  Copies a buffer to an allocated buffer of type EfiRuntimeServicesData at a specified alignment.
+
+  Allocates the number bytes specified by AllocationSize of type EfiRuntimeServicesData type with an
+  alignment specified by Alignment.  The allocated buffer is returned.  If AllocationSize is 0,
+  then a valid buffer of 0 size is returned.  If there is not enough memory at the specified
+  alignment remaining to satisfy the request, then NULL is returned.
+  If Alignment is not a power of two and Alignment is not zero, then ASSERT().
+
+  @param  AllocationSize        The number of bytes to allocate.
+  @param  Buffer                The buffer to copy to the allocated buffer.
+  @param  Alignment             The requested alignment of the allocation.  Must be a power of two.
+                                If Alignment is zero, then byte alignment is used.
+
+  @return A pointer to the allocated buffer or NULL if allocation fails.
+
+**/
+VOID *
+EFIAPI
+UncachedAllocateAlignedRuntimeCopyPool (
+  IN UINTN       AllocationSize,
+  IN CONST VOID  *Buffer,
+  IN UINTN       Alignment
+  );
+
+/**
+  Copies a buffer to an allocated buffer of type EfiReservedMemoryType at a specified alignment.
+
+  Allocates the number bytes specified by AllocationSize of type EfiReservedMemoryType type with an
+  alignment specified by Alignment.  The allocated buffer is returned.  If AllocationSize is 0,
+  then a valid buffer of 0 size is returned.  If there is not enough memory at the specified
+  alignment remaining to satisfy the request, then NULL is returned.
+  If Alignment is not a power of two and Alignment is not zero, then ASSERT().
+
+  @param  AllocationSize        The number of bytes to allocate.
+  @param  Buffer                The buffer to copy to the allocated buffer.
+  @param  Alignment             The requested alignment of the allocation.  Must be a power of two.
+                                If Alignment is zero, then byte alignment is used.
+
+  @return A pointer to the allocated buffer or NULL if allocation fails.
+
+**/
+VOID *
+EFIAPI
+UncachedAllocateAlignedReservedCopyPool (
+  IN UINTN       AllocationSize,
+  IN CONST VOID  *Buffer,
+  IN UINTN       Alignment
+  );
+
+/**
+  Frees a buffer that was previously allocated with one of the aligned pool allocation functions
+  in the Memory Allocation Library.
+
+  Frees the buffer specified by Buffer.  Buffer must have been allocated on a previous call to the
+  aligned pool allocation services of the Memory Allocation Library.
+  If Buffer was not allocated with an aligned pool allocation function in the Memory Allocation
+  Library, then ASSERT().
+
+  @param  Buffer                Pointer to the buffer to free.
+
+**/
+VOID
+EFIAPI
+UncachedFreeAlignedPool (
+  IN VOID   *Buffer
+  );
+
+VOID
+EFIAPI
+UncachedSafeFreePool (
+  IN VOID   *Buffer
+  );
+
+#endif // __UNCACHED_MEMORY_ALLOCATION_LIB_H__
diff --git a/Platform/Hisilicon/HiKey/Library/ArmDmaLib/ArmDmaLib.c b/Platform/Hisilicon/HiKey/Library/ArmDmaLib/ArmDmaLib.c
new file mode 100644
index 000000000..f4ee9e4c5
--- /dev/null
+++ b/Platform/Hisilicon/HiKey/Library/ArmDmaLib/ArmDmaLib.c
@@ -0,0 +1,342 @@
+/** @file
+  Generic ARM implementation of DmaLib.h
+
+  Copyright (c) 2008 - 2010, Apple Inc. All rights reserved.<BR>
+
+  This program and the accompanying materials
+  are licensed and made available under the terms and conditions of the BSD License
+  which accompanies this distribution.  The full text of the license may be found at
+  http://opensource.org/licenses/bsd-license.php
+
+  THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+  WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+#include <PiDxe.h>
+#include <Library/DebugLib.h>
+#include <Library/DmaLib.h>
+#include <Library/DxeServicesTableLib.h>
+#include <Library/MemoryAllocationLib.h>
+#include <Library/UefiBootServicesTableLib.h>
+#include <Library/UncachedMemoryAllocationLib.h>
+#include <Library/IoLib.h>
+#include <Library/BaseMemoryLib.h>
+
+#include <Protocol/Cpu.h>
+
+typedef struct {
+  EFI_PHYSICAL_ADDRESS      HostAddress;
+  VOID                      *BufferAddress;
+  UINTN                     NumberOfBytes;
+  DMA_MAP_OPERATION         Operation;
+  BOOLEAN                   DoubleBuffer;
+} MAP_INFO_INSTANCE;
+
+
+
+STATIC EFI_CPU_ARCH_PROTOCOL      *mCpu;
+
+STATIC
+PHYSICAL_ADDRESS
+HostToDeviceAddress (
+  IN  PHYSICAL_ADDRESS  HostAddress
+  )
+{
+  return HostAddress + PcdGet64 (PcdArmDmaDeviceOffset);
+}
+
+/**
+  Provides the DMA controller-specific addresses needed to access system memory.
+
+  Operation is relative to the DMA bus master.
+
+  @param  Operation             Indicates if the bus master is going to read or write to system memory.
+  @param  HostAddress           The system memory address to map to the DMA controller.
+  @param  NumberOfBytes         On input the number of bytes to map. On output the number of bytes
+                                that were mapped.
+  @param  DeviceAddress         The resulting map address for the bus master controller to use to
+                                access the hosts HostAddress.
+  @param  Mapping               A resulting value to pass to Unmap().
+
+  @retval EFI_SUCCESS           The range was mapped for the returned NumberOfBytes.
+  @retval EFI_UNSUPPORTED       The HostAddress cannot be mapped as a common buffer.
+  @retval EFI_INVALID_PARAMETER One or more parameters are invalid.
+  @retval EFI_OUT_OF_RESOURCES  The request could not be completed due to a lack of resources.
+  @retval EFI_DEVICE_ERROR      The system hardware could not map the requested address.
+
+**/
+EFI_STATUS
+EFIAPI
+DmaMap (
+  IN     DMA_MAP_OPERATION              Operation,
+  IN     VOID                           *HostAddress,
+  IN OUT UINTN                          *NumberOfBytes,
+  OUT    PHYSICAL_ADDRESS               *DeviceAddress,
+  OUT    VOID                           **Mapping
+  )
+{
+  EFI_STATUS                      Status;
+  MAP_INFO_INSTANCE               *Map;
+  VOID                            *Buffer;
+  EFI_GCD_MEMORY_SPACE_DESCRIPTOR GcdDescriptor;
+
+  if (HostAddress == NULL || NumberOfBytes == NULL || DeviceAddress == NULL || Mapping == NULL ) {
+    return EFI_INVALID_PARAMETER;
+  }
+
+  if (Operation >= MapOperationMaximum) {
+    return EFI_INVALID_PARAMETER;
+  }
+
+  //
+  // The debug implementation of UncachedMemoryAllocationLib in ArmPkg returns
+  // a virtual uncached alias, and unmaps the cached ID mapping of the buffer,
+  // in order to catch inadvertent references to the cached mapping.
+  // Since HostToDeviceAddress () expects ID mapped input addresses, convert
+  // the host address to an ID mapped address first.
+  //
+  *DeviceAddress = HostToDeviceAddress (ConvertToPhysicalAddress (HostAddress));
+
+  // Remember range so we can flush on the other side
+  Map = AllocatePool (sizeof (MAP_INFO_INSTANCE));
+  if (Map == NULL) {
+    return  EFI_OUT_OF_RESOURCES;
+  }
+
+  if ((((UINTN)HostAddress & (mCpu->DmaBufferAlignment - 1)) != 0) ||
+      ((*NumberOfBytes & (mCpu->DmaBufferAlignment - 1)) != 0)) {
+
+    // Get the cacheability of the region
+    Status = gDS->GetMemorySpaceDescriptor ((UINTN)HostAddress, &GcdDescriptor);
+    if (EFI_ERROR(Status)) {
+      goto FreeMapInfo;
+    }
+
+    // If the mapped buffer is not an uncached buffer
+    if ((GcdDescriptor.Attributes & (EFI_MEMORY_WB | EFI_MEMORY_WT)) != 0) {
+      //
+      // Operations of type MapOperationBusMasterCommonBuffer are only allowed
+      // on uncached buffers.
+      //
+      if (Operation == MapOperationBusMasterCommonBuffer) {
+        DEBUG ((EFI_D_ERROR,
+          "%a: Operation type 'MapOperationBusMasterCommonBuffer' is only supported\n"
+          "on memory regions that were allocated using DmaAllocateBuffer ()\n",
+          __FUNCTION__));
+        Status = EFI_UNSUPPORTED;
+        goto FreeMapInfo;
+      }
+
+      //
+      // If the buffer does not fill entire cache lines we must double buffer into
+      // uncached memory. Device (PCI) address becomes uncached page.
+      //
+      Map->DoubleBuffer  = TRUE;
+      Status = DmaAllocateBuffer (EfiBootServicesData, EFI_SIZE_TO_PAGES (*NumberOfBytes), &Buffer);
+      if (EFI_ERROR (Status)) {
+        goto FreeMapInfo;
+      }
+
+      if (Operation == MapOperationBusMasterRead) {
+        CopyMem (Buffer, HostAddress, *NumberOfBytes);
+      }
+
+      *DeviceAddress = HostToDeviceAddress (ConvertToPhysicalAddress (Buffer));
+      Map->BufferAddress = Buffer;
+    } else {
+      Map->DoubleBuffer  = FALSE;
+    }
+  } else {
+    Map->DoubleBuffer  = FALSE;
+
+    DEBUG_CODE_BEGIN ();
+
+    //
+    // The operation type check above only executes if the buffer happens to be
+    // misaligned with respect to CWG, but even if it is aligned, we should not
+    // allow arbitrary buffers to be used for creating consistent mappings.
+    // So duplicate the check here when running in DEBUG mode, just to assert
+    // that we are not trying to create a consistent mapping for cached memory.
+    //
+    Status = gDS->GetMemorySpaceDescriptor ((UINTN)HostAddress, &GcdDescriptor);
+    ASSERT_EFI_ERROR(Status);
+
+    ASSERT (Operation != MapOperationBusMasterCommonBuffer ||
+            (GcdDescriptor.Attributes & (EFI_MEMORY_WB | EFI_MEMORY_WT)) == 0);
+
+    DEBUG_CODE_END ();
+
+    // Flush the Data Cache (should not have any effect if the memory region is uncached)
+    mCpu->FlushDataCache (mCpu, (UINTN)HostAddress, *NumberOfBytes,
+            EfiCpuFlushTypeWriteBackInvalidate);
+  }
+
+  Map->HostAddress   = (UINTN)HostAddress;
+  Map->NumberOfBytes = *NumberOfBytes;
+  Map->Operation     = Operation;
+
+  *Mapping = Map;
+
+  return EFI_SUCCESS;
+
+FreeMapInfo:
+  FreePool (Map);
+
+  return Status;
+}
+
+
+/**
+  Completes the DmaMapBusMasterRead(), DmaMapBusMasterWrite(), or DmaMapBusMasterCommonBuffer()
+  operation and releases any corresponding resources.
+
+  @param  Mapping               The mapping value returned from DmaMap*().
+
+  @retval EFI_SUCCESS           The range was unmapped.
+  @retval EFI_DEVICE_ERROR      The data was not committed to the target system memory.
+  @retval EFI_INVALID_PARAMETER An inconsistency was detected between the mapping type
+                                and the DoubleBuffer field
+
+**/
+EFI_STATUS
+EFIAPI
+DmaUnmap (
+  IN  VOID                         *Mapping
+  )
+{
+  MAP_INFO_INSTANCE *Map;
+  EFI_STATUS        Status;
+
+  if (Mapping == NULL) {
+    ASSERT (FALSE);
+    return EFI_INVALID_PARAMETER;
+  }
+
+  Map = (MAP_INFO_INSTANCE *)Mapping;
+
+  Status = EFI_SUCCESS;
+  if (Map->DoubleBuffer) {
+    ASSERT (Map->Operation != MapOperationBusMasterCommonBuffer);
+
+    if (Map->Operation == MapOperationBusMasterCommonBuffer) {
+      Status = EFI_INVALID_PARAMETER;
+    } else if (Map->Operation == MapOperationBusMasterWrite) {
+      CopyMem ((VOID *)(UINTN)Map->HostAddress, Map->BufferAddress,
+        Map->NumberOfBytes);
+    }
+
+    DmaFreeBuffer (EFI_SIZE_TO_PAGES (Map->NumberOfBytes), Map->BufferAddress);
+
+  } else {
+    if (Map->Operation == MapOperationBusMasterWrite) {
+      //
+      // Make sure we read buffer from uncached memory and not the cache
+      //
+      mCpu->FlushDataCache (mCpu, Map->HostAddress, Map->NumberOfBytes,
+              EfiCpuFlushTypeInvalidate);
+    }
+  }
+
+  FreePool (Map);
+
+  return Status;
+}
+
+/**
+  Allocates pages that are suitable for an DmaMap() of type MapOperationBusMasterCommonBuffer.
+  mapping.
+
+  @param  MemoryType            The type of memory to allocate, EfiBootServicesData or
+                                EfiRuntimeServicesData.
+  @param  Pages                 The number of pages to allocate.
+  @param  HostAddress           A pointer to store the base system memory address of the
+                                allocated range.
+
+                                @retval EFI_SUCCESS           The requested memory pages were allocated.
+  @retval EFI_UNSUPPORTED       Attributes is unsupported. The only legal attribute bits are
+                                MEMORY_WRITE_COMBINE and MEMORY_CACHED.
+  @retval EFI_INVALID_PARAMETER One or more parameters are invalid.
+  @retval EFI_OUT_OF_RESOURCES  The memory pages could not be allocated.
+
+**/
+EFI_STATUS
+EFIAPI
+DmaAllocateBuffer (
+  IN  EFI_MEMORY_TYPE              MemoryType,
+  IN  UINTN                        Pages,
+  OUT VOID                         **HostAddress
+  )
+{
+  VOID    *Allocation;
+
+  if (HostAddress == NULL) {
+    return EFI_INVALID_PARAMETER;
+  }
+
+  //
+  // The only valid memory types are EfiBootServicesData and EfiRuntimeServicesData
+  //
+  // We used uncached memory to keep coherency
+  //
+  if (MemoryType == EfiBootServicesData) {
+    Allocation = UncachedAllocatePages (Pages);
+  } else if (MemoryType == EfiRuntimeServicesData) {
+    Allocation = UncachedAllocateRuntimePages (Pages);
+  } else {
+    return EFI_INVALID_PARAMETER;
+  }
+
+  if (Allocation == NULL) {
+    return EFI_OUT_OF_RESOURCES;
+  }
+
+  *HostAddress = Allocation;
+
+  return EFI_SUCCESS;
+}
+
+
+/**
+  Frees memory that was allocated with DmaAllocateBuffer().
+
+  @param  Pages                 The number of pages to free.
+  @param  HostAddress           The base system memory address of the allocated range.
+
+  @retval EFI_SUCCESS           The requested memory pages were freed.
+  @retval EFI_INVALID_PARAMETER The memory range specified by HostAddress and Pages
+                                was not allocated with DmaAllocateBuffer().
+
+**/
+EFI_STATUS
+EFIAPI
+DmaFreeBuffer (
+  IN  UINTN                        Pages,
+  IN  VOID                         *HostAddress
+  )
+{
+  if (HostAddress == NULL) {
+     return EFI_INVALID_PARAMETER;
+  }
+
+  UncachedFreePages (HostAddress, Pages);
+  return EFI_SUCCESS;
+}
+
+
+EFI_STATUS
+EFIAPI
+ArmDmaLibConstructor (
+  IN EFI_HANDLE       ImageHandle,
+  IN EFI_SYSTEM_TABLE *SystemTable
+  )
+{
+  EFI_STATUS              Status;
+
+  // Get the Cpu protocol for later use
+  Status = gBS->LocateProtocol (&gEfiCpuArchProtocolGuid, NULL, (VOID **)&mCpu);
+  ASSERT_EFI_ERROR(Status);
+
+  return Status;
+}
+
diff --git a/Platform/Hisilicon/HiKey/Library/ArmDmaLib/ArmDmaLib.inf b/Platform/Hisilicon/HiKey/Library/ArmDmaLib/ArmDmaLib.inf
new file mode 100644
index 000000000..9b7dad114
--- /dev/null
+++ b/Platform/Hisilicon/HiKey/Library/ArmDmaLib/ArmDmaLib.inf
@@ -0,0 +1,50 @@
+#/** @file
+#
+#  Copyright (c) 2008 - 2010, Apple Inc. All rights reserved.<BR>
+#  This program and the accompanying materials
+#  are licensed and made available under the terms and conditions of the BSD License
+#  which accompanies this distribution.  The full text of the license may be found at
+#  http://opensource.org/licenses/bsd-license.php
+#
+#  THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+#  WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+#
+#**/
+
+[Defines]
+  INF_VERSION                    = 0x00010005
+  BASE_NAME                      = ArmDmaLib
+  FILE_GUID                      = F1BD6B36-B705-43aa-8A28-33F58ED85EFB
+  MODULE_TYPE                    = UEFI_DRIVER
+  VERSION_STRING                 = 1.0
+  LIBRARY_CLASS                  = DmaLib
+  CONSTRUCTOR                    = ArmDmaLibConstructor
+
+[Sources.common]
+  ArmDmaLib.c
+
+[Packages]
+  MdePkg/MdePkg.dec
+  EmbeddedPkg/EmbeddedPkg.dec
+  ArmPkg/ArmPkg.dec
+
+
+[LibraryClasses]
+  DebugLib
+  DxeServicesTableLib
+  UefiBootServicesTableLib
+  MemoryAllocationLib
+  UncachedMemoryAllocationLib
+  IoLib
+  BaseMemoryLib
+
+[Protocols]
+  gEfiCpuArchProtocolGuid
+
+[Guids]
+
+[Pcd]
+  gArmTokenSpaceGuid.PcdArmDmaDeviceOffset
+
+[Depex]
+  gEfiCpuArchProtocolGuid
diff --git a/Platform/Hisilicon/HiKey/Library/UncachedMemoryAllocationLib/UncachedMemoryAllocationLib.c b/Platform/Hisilicon/HiKey/Library/UncachedMemoryAllocationLib/UncachedMemoryAllocationLib.c
new file mode 100644
index 000000000..f6c692f9a
--- /dev/null
+++ b/Platform/Hisilicon/HiKey/Library/UncachedMemoryAllocationLib/UncachedMemoryAllocationLib.c
@@ -0,0 +1,692 @@
+/** @file
+  UncachedMemoryAllocation lib that uses DXE Service to change cachability for
+  a buffer.
+
+  Copyright (c) 2008 - 2010, Apple Inc. All rights reserved.<BR>
+  Copyright (c) 2014, AMR Ltd. All rights reserved.<BR>
+
+  This program and the accompanying materials
+  are licensed and made available under the terms and conditions of the BSD License
+  which accompanies this distribution.  The full text of the license may be found at
+  http://opensource.org/licenses/bsd-license.php
+
+  THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+  WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+#include <Base.h>
+#include <Library/BaseLib.h>
+#include <Library/BaseMemoryLib.h>
+#include <Library/MemoryAllocationLib.h>
+#include <Library/DebugLib.h>
+#include <Library/UefiBootServicesTableLib.h>
+#include <Library/UncachedMemoryAllocationLib.h>
+#include <Library/PcdLib.h>
+#include <Library/ArmLib.h>
+#include <Library/DxeServicesTableLib.h>
+#include <Library/CacheMaintenanceLib.h>
+
+VOID *
+UncachedInternalAllocatePages (
+  IN EFI_MEMORY_TYPE  MemoryType,
+  IN UINTN            Pages
+  );
+
+VOID *
+UncachedInternalAllocateAlignedPages (
+  IN EFI_MEMORY_TYPE  MemoryType,
+  IN UINTN            Pages,
+  IN UINTN            Alignment
+  );
+
+
+
+//
+// Assume all of memory has the same cache attributes, unless we do our magic
+//
+UINT64  gAttributes;
+
+typedef struct {
+  EFI_PHYSICAL_ADDRESS  Base;
+  VOID                  *Allocation;
+  UINTN                 Pages;
+  EFI_MEMORY_TYPE       MemoryType;
+  BOOLEAN               Allocated;
+  LIST_ENTRY            Link;
+} FREE_PAGE_NODE;
+
+STATIC LIST_ENTRY  mPageList = INITIALIZE_LIST_HEAD_VARIABLE (mPageList);
+// Track the size of the non-allocated buffer in the linked-list
+STATIC UINTN   mFreedBufferSize = 0;
+
+/**
+ * This function firstly checks if the requested allocation can fit into one
+ * of the previously allocated buffer.
+ * If the requested allocation does not fit in the existing pool then
+ * the function makes a new allocation.
+ *
+ * @param MemoryType    Type of memory requested for the new allocation
+ * @param Pages         Number of requested page
+ * @param Alignment     Required alignment
+ * @param Allocation    Address of the newly allocated buffer
+ *
+ * @return EFI_SUCCESS  If the function manage to allocate a buffer
+ * @return !EFI_SUCCESS If the function did not manage to allocate a buffer
+ */
+STATIC
+EFI_STATUS
+AllocatePagesFromList (
+  IN EFI_MEMORY_TYPE  MemoryType,
+  IN UINTN            Pages,
+  IN UINTN            Alignment,
+  OUT VOID            **Allocation
+  )
+{
+  EFI_STATUS       Status;
+  LIST_ENTRY      *Link;
+  FREE_PAGE_NODE  *Node;
+  FREE_PAGE_NODE  *NewNode;
+  UINTN            AlignmentMask;
+  EFI_PHYSICAL_ADDRESS Memory;
+  EFI_GCD_MEMORY_SPACE_DESCRIPTOR Descriptor;
+
+  // Alignment must be a power of two or zero.
+  ASSERT ((Alignment & (Alignment - 1)) == 0);
+
+  //
+  // Look in our list for the smallest page that could satisfy the new allocation
+  //
+  Node = NULL;
+  NewNode = NULL;
+  for (Link = mPageList.ForwardLink; Link != &mPageList; Link = Link->ForwardLink) {
+    Node = BASE_CR (Link, FREE_PAGE_NODE, Link);
+    if ((Node->Allocated == FALSE) && (Node->MemoryType == MemoryType)) {
+      // We have a node that fits our requirements
+      if (((UINTN)Node->Base & (Alignment - 1)) == 0) {
+        // We found a page that matches the page size
+        if (Node->Pages == Pages) {
+          Node->Allocated  = TRUE;
+          Node->Allocation = (VOID*)(UINTN)Node->Base;
+          *Allocation      = Node->Allocation;
+
+          // Update the size of the freed buffer
+          mFreedBufferSize  -= Pages * EFI_PAGE_SIZE;
+          return EFI_SUCCESS;
+        } else if (Node->Pages > Pages) {
+          if (NewNode == NULL) {
+            // It is the first node that could contain our new allocation
+            NewNode = Node;
+          } else if (NewNode->Pages > Node->Pages) {
+            // This node offers a smaller number of page.
+            NewNode = Node;
+          }
+        }
+      }
+    }
+  }
+  // Check if we have found a node that could contain our new allocation
+  if (NewNode != NULL) {
+    NewNode->Allocated  = TRUE;
+    NewNode->Allocation = (VOID*)(UINTN)NewNode->Base;
+    *Allocation         = NewNode->Allocation;
+    mFreedBufferSize    -= NewNode->Pages * EFI_PAGE_SIZE;
+    return EFI_SUCCESS;
+  }
+
+  //
+  // Otherwise, we need to allocate a new buffer
+  //
+
+  // We do not want to over-allocate in case the alignment requirement does not
+  // require extra pages
+  if (Alignment > EFI_PAGE_SIZE) {
+    AlignmentMask  = Alignment - 1;
+    Pages          += EFI_SIZE_TO_PAGES (Alignment);
+  } else {
+    AlignmentMask  = 0;
+  }
+
+  Status = gBS->AllocatePages (AllocateAnyPages, MemoryType, Pages, &Memory);
+  if (EFI_ERROR (Status)) {
+    return Status;
+  }
+
+  Status = gDS->GetMemorySpaceDescriptor (Memory, &Descriptor);
+  if (!EFI_ERROR (Status)) {
+    // We are making an assumption that all of memory has the same default attributes
+    gAttributes = Descriptor.Attributes;
+  } else {
+    gBS->FreePages (Memory, Pages);
+    return Status;
+  }
+
+  Status = gDS->SetMemorySpaceAttributes (Memory, EFI_PAGES_TO_SIZE (Pages), EFI_MEMORY_WC);
+  if (EFI_ERROR (Status)) {
+    gBS->FreePages (Memory, Pages);
+    return Status;
+  }
+
+  InvalidateDataCacheRange ((VOID *)(UINTN)Memory, EFI_PAGES_TO_SIZE (Pages));
+
+  NewNode = AllocatePool (sizeof (FREE_PAGE_NODE));
+  if (NewNode == NULL) {
+    ASSERT (FALSE);
+    gBS->FreePages (Memory, Pages);
+    return EFI_OUT_OF_RESOURCES;
+  }
+
+  NewNode->Base       = Memory;
+  NewNode->Allocation = (VOID*)(((UINTN)Memory + AlignmentMask) & ~AlignmentMask);
+  NewNode->Pages      = Pages;
+  NewNode->Allocated  = TRUE;
+  NewNode->MemoryType = MemoryType;
+
+  InsertTailList (&mPageList, &NewNode->Link);
+
+  *Allocation = NewNode->Allocation;
+  return EFI_SUCCESS;
+}
+
+/**
+ * Free the memory allocation
+ *
+ * This function will actually try to find the allocation in the linked list.
+ * And it will then mark the entry as freed.
+ *
+ * @param  Allocation  Base address of the buffer to free
+ *
+ * @return EFI_SUCCESS            The allocation has been freed
+ * @return EFI_NOT_FOUND          The allocation was not found in the pool.
+ * @return EFI_INVALID_PARAMETER  If Allocation is NULL
+ *
+ */
+STATIC
+EFI_STATUS
+FreePagesFromList (
+  IN  VOID  *Allocation
+  )
+{
+  LIST_ENTRY      *Link;
+  FREE_PAGE_NODE  *Node;
+
+  if (Allocation == NULL) {
+    return EFI_INVALID_PARAMETER;
+  }
+
+  for (Link = mPageList.ForwardLink; Link != &mPageList; Link = Link->ForwardLink) {
+    Node = BASE_CR (Link, FREE_PAGE_NODE, Link);
+    if ((UINTN)Node->Allocation == (UINTN)Allocation) {
+      Node->Allocated = FALSE;
+
+      // Update the size of the freed buffer
+      mFreedBufferSize  += Node->Pages * EFI_PAGE_SIZE;
+
+      // If the size of the non-allocated reaches the threshold we raise a warning.
+      // It might be an expected behaviour in some cases.
+      // We might device to free some of these buffers later on.
+      if (mFreedBufferSize > PcdGet64 (PcdArmFreeUncachedMemorySizeThreshold)) {
+        DEBUG ((EFI_D_WARN, "Warning: The list of non-allocated buffer has reach the threshold.\n"));
+      }
+      return EFI_SUCCESS;
+    }
+  }
+
+  return EFI_NOT_FOUND;
+}
+
+/**
+ * This function is automatically invoked when the driver exits
+ * It frees all the non-allocated memory buffer.
+ * This function is not responsible to free allocated buffer (eg: case of memory leak,
+ * runtime allocation).
+ */
+EFI_STATUS
+EFIAPI
+UncachedMemoryAllocationLibDestructor (
+  IN EFI_HANDLE        ImageHandle,
+  IN EFI_SYSTEM_TABLE  *SystemTable
+  )
+{
+  LIST_ENTRY      *Link;
+  FREE_PAGE_NODE  *OldNode;
+
+  // Test if the list is empty
+  Link = mPageList.ForwardLink;
+  if (Link == &mPageList) {
+    return EFI_SUCCESS;
+  }
+
+  // Free all the pages and nodes
+  do {
+    OldNode = BASE_CR (Link, FREE_PAGE_NODE, Link);
+    // Point to the next entry
+    Link = Link->ForwardLink;
+
+    // We only free the non-allocated buffer
+    if (OldNode->Allocated == FALSE) {
+      gBS->FreePages ((EFI_PHYSICAL_ADDRESS)(UINTN)OldNode->Base, OldNode->Pages);
+      RemoveEntryList (&OldNode->Link);
+      FreePool (OldNode);
+    }
+  } while (Link != &mPageList);
+
+  return EFI_SUCCESS;
+}
+
+/**
+  Converts a cached or uncached address to a physical address suitable for use in SoC registers.
+
+  @param  VirtualAddress                 The pointer to convert.
+
+  @return The physical address of the supplied virtual pointer.
+
+**/
+EFI_PHYSICAL_ADDRESS
+ConvertToPhysicalAddress (
+  IN VOID *VirtualAddress
+  )
+{
+  return (EFI_PHYSICAL_ADDRESS)(UINTN)VirtualAddress;
+}
+
+
+VOID *
+UncachedInternalAllocatePages (
+  IN EFI_MEMORY_TYPE  MemoryType,
+  IN UINTN            Pages
+  )
+{
+  return UncachedInternalAllocateAlignedPages (MemoryType, Pages, EFI_PAGE_SIZE);
+}
+
+
+VOID *
+EFIAPI
+UncachedAllocatePages (
+  IN UINTN  Pages
+  )
+{
+  return UncachedInternalAllocatePages (EfiBootServicesData, Pages);
+}
+
+VOID *
+EFIAPI
+UncachedAllocateRuntimePages (
+  IN UINTN  Pages
+  )
+{
+  return UncachedInternalAllocatePages (EfiRuntimeServicesData, Pages);
+}
+
+VOID *
+EFIAPI
+UncachedAllocateReservedPages (
+  IN UINTN  Pages
+  )
+{
+  return UncachedInternalAllocatePages (EfiReservedMemoryType, Pages);
+}
+
+
+
+VOID
+EFIAPI
+UncachedFreePages (
+  IN VOID   *Buffer,
+  IN UINTN  Pages
+  )
+{
+  UncachedFreeAlignedPages (Buffer, Pages);
+  return;
+}
+
+
+VOID *
+UncachedInternalAllocateAlignedPages (
+  IN EFI_MEMORY_TYPE  MemoryType,
+  IN UINTN            Pages,
+  IN UINTN            Alignment
+  )
+{
+  EFI_STATUS Status;
+  VOID   *Allocation;
+
+  if (Pages == 0) {
+    return NULL;
+  }
+
+  Allocation = NULL;
+  Status = AllocatePagesFromList (MemoryType, Pages, Alignment, &Allocation);
+  if (EFI_ERROR (Status)) {
+    ASSERT_EFI_ERROR (Status);
+    return NULL;
+  } else {
+    return Allocation;
+  }
+}
+
+
+VOID
+EFIAPI
+UncachedFreeAlignedPages (
+  IN VOID   *Buffer,
+  IN UINTN  Pages
+  )
+{
+  FreePagesFromList (Buffer);
+}
+
+
+VOID *
+UncachedInternalAllocateAlignedPool (
+  IN EFI_MEMORY_TYPE  PoolType,
+  IN UINTN            AllocationSize,
+  IN UINTN            Alignment
+  )
+{
+  VOID      *AlignedAddress;
+
+  //
+  // Alignment must be a power of two or zero.
+  //
+  ASSERT ((Alignment & (Alignment - 1)) == 0);
+
+  if (Alignment < EFI_PAGE_SIZE) {
+    Alignment = EFI_PAGE_SIZE;
+  }
+
+  AlignedAddress = UncachedInternalAllocateAlignedPages (PoolType, EFI_SIZE_TO_PAGES (AllocationSize), Alignment);
+  if (AlignedAddress == NULL) {
+    return NULL;
+  }
+
+  return (VOID *) AlignedAddress;
+}
+
+VOID *
+EFIAPI
+UncachedAllocateAlignedPool (
+  IN UINTN  AllocationSize,
+  IN UINTN  Alignment
+  )
+{
+  return UncachedInternalAllocateAlignedPool (EfiBootServicesData, AllocationSize, Alignment);
+}
+
+VOID *
+EFIAPI
+UncachedAllocateAlignedRuntimePool (
+  IN UINTN  AllocationSize,
+  IN UINTN  Alignment
+  )
+{
+  return UncachedInternalAllocateAlignedPool (EfiRuntimeServicesData, AllocationSize, Alignment);
+}
+
+VOID *
+EFIAPI
+UncachedAllocateAlignedReservedPool (
+  IN UINTN  AllocationSize,
+  IN UINTN  Alignment
+  )
+{
+  return UncachedInternalAllocateAlignedPool (EfiReservedMemoryType, AllocationSize, Alignment);
+}
+
+VOID *
+UncachedInternalAllocateAlignedZeroPool (
+  IN EFI_MEMORY_TYPE  PoolType,
+  IN UINTN            AllocationSize,
+  IN UINTN            Alignment
+  )
+{
+  VOID    *Memory;
+  Memory = UncachedInternalAllocateAlignedPool (PoolType, AllocationSize, Alignment);
+  if (Memory != NULL) {
+    Memory = ZeroMem (Memory, AllocationSize);
+  }
+  return Memory;
+}
+
+VOID *
+EFIAPI
+UncachedAllocateAlignedZeroPool (
+  IN UINTN  AllocationSize,
+  IN UINTN  Alignment
+  )
+{
+  return UncachedInternalAllocateAlignedZeroPool (EfiBootServicesData, AllocationSize, Alignment);
+}
+
+VOID *
+EFIAPI
+UncachedAllocateAlignedRuntimeZeroPool (
+  IN UINTN  AllocationSize,
+  IN UINTN  Alignment
+  )
+{
+  return UncachedInternalAllocateAlignedZeroPool (EfiRuntimeServicesData, AllocationSize, Alignment);
+}
+
+VOID *
+EFIAPI
+UncachedAllocateAlignedReservedZeroPool (
+  IN UINTN  AllocationSize,
+  IN UINTN  Alignment
+  )
+{
+  return UncachedInternalAllocateAlignedZeroPool (EfiReservedMemoryType, AllocationSize, Alignment);
+}
+
+VOID *
+UncachedInternalAllocateAlignedCopyPool (
+  IN EFI_MEMORY_TYPE  PoolType,
+  IN UINTN            AllocationSize,
+  IN CONST VOID       *Buffer,
+  IN UINTN            Alignment
+  )
+{
+  VOID  *Memory;
+
+  ASSERT (Buffer != NULL);
+  ASSERT (AllocationSize <= (MAX_ADDRESS - (UINTN) Buffer + 1));
+
+  Memory = UncachedInternalAllocateAlignedPool (PoolType, AllocationSize, Alignment);
+  if (Memory != NULL) {
+    Memory = CopyMem (Memory, Buffer, AllocationSize);
+  }
+  return Memory;
+}
+
+VOID *
+EFIAPI
+UncachedAllocateAlignedCopyPool (
+  IN UINTN       AllocationSize,
+  IN CONST VOID  *Buffer,
+  IN UINTN       Alignment
+  )
+{
+  return UncachedInternalAllocateAlignedCopyPool (EfiBootServicesData, AllocationSize, Buffer, Alignment);
+}
+
+VOID *
+EFIAPI
+UncachedAllocateAlignedRuntimeCopyPool (
+  IN UINTN       AllocationSize,
+  IN CONST VOID  *Buffer,
+  IN UINTN       Alignment
+  )
+{
+  return UncachedInternalAllocateAlignedCopyPool (EfiRuntimeServicesData, AllocationSize, Buffer, Alignment);
+}
+
+VOID *
+EFIAPI
+UncachedAllocateAlignedReservedCopyPool (
+  IN UINTN       AllocationSize,
+  IN CONST VOID  *Buffer,
+  IN UINTN       Alignment
+  )
+{
+  return UncachedInternalAllocateAlignedCopyPool (EfiReservedMemoryType, AllocationSize, Buffer, Alignment);
+}
+
+VOID
+EFIAPI
+UncachedFreeAlignedPool (
+  IN VOID   *Allocation
+  )
+{
+  UncachedFreePages (Allocation, 0);
+}
+
+VOID *
+UncachedInternalAllocatePool (
+  IN EFI_MEMORY_TYPE  MemoryType,
+  IN UINTN            AllocationSize
+  )
+{
+  UINTN CacheLineLength = ArmDataCacheLineLength ();
+  return UncachedInternalAllocateAlignedPool (MemoryType, AllocationSize, CacheLineLength);
+}
+
+VOID *
+EFIAPI
+UncachedAllocatePool (
+  IN UINTN  AllocationSize
+  )
+{
+  return UncachedInternalAllocatePool (EfiBootServicesData, AllocationSize);
+}
+
+VOID *
+EFIAPI
+UncachedAllocateRuntimePool (
+  IN UINTN  AllocationSize
+  )
+{
+  return UncachedInternalAllocatePool (EfiRuntimeServicesData, AllocationSize);
+}
+
+VOID *
+EFIAPI
+UncachedAllocateReservedPool (
+  IN UINTN  AllocationSize
+  )
+{
+  return UncachedInternalAllocatePool (EfiReservedMemoryType, AllocationSize);
+}
+
+VOID *
+UncachedInternalAllocateZeroPool (
+  IN EFI_MEMORY_TYPE  PoolType,
+  IN UINTN            AllocationSize
+  )
+{
+  VOID  *Memory;
+
+  Memory = UncachedInternalAllocatePool (PoolType, AllocationSize);
+  if (Memory != NULL) {
+    Memory = ZeroMem (Memory, AllocationSize);
+  }
+  return Memory;
+}
+
+VOID *
+EFIAPI
+UncachedAllocateZeroPool (
+  IN UINTN  AllocationSize
+  )
+{
+  return UncachedInternalAllocateZeroPool (EfiBootServicesData, AllocationSize);
+}
+
+VOID *
+EFIAPI
+UncachedAllocateRuntimeZeroPool (
+  IN UINTN  AllocationSize
+  )
+{
+  return UncachedInternalAllocateZeroPool (EfiRuntimeServicesData, AllocationSize);
+}
+
+VOID *
+EFIAPI
+UncachedAllocateReservedZeroPool (
+  IN UINTN  AllocationSize
+  )
+{
+  return UncachedInternalAllocateZeroPool (EfiReservedMemoryType, AllocationSize);
+}
+
+VOID *
+UncachedInternalAllocateCopyPool (
+  IN EFI_MEMORY_TYPE  PoolType,
+  IN UINTN            AllocationSize,
+  IN CONST VOID       *Buffer
+  )
+{
+  VOID  *Memory;
+
+  ASSERT (Buffer != NULL);
+  ASSERT (AllocationSize <= (MAX_ADDRESS - (UINTN) Buffer + 1));
+
+  Memory = UncachedInternalAllocatePool (PoolType, AllocationSize);
+  if (Memory != NULL) {
+     Memory = CopyMem (Memory, Buffer, AllocationSize);
+  }
+  return Memory;
+}
+
+VOID *
+EFIAPI
+UncachedAllocateCopyPool (
+  IN UINTN       AllocationSize,
+  IN CONST VOID  *Buffer
+  )
+{
+  return UncachedInternalAllocateCopyPool (EfiBootServicesData, AllocationSize, Buffer);
+}
+
+VOID *
+EFIAPI
+UncachedAllocateRuntimeCopyPool (
+  IN UINTN       AllocationSize,
+  IN CONST VOID  *Buffer
+  )
+{
+  return UncachedInternalAllocateCopyPool (EfiRuntimeServicesData, AllocationSize, Buffer);
+}
+
+VOID *
+EFIAPI
+UncachedAllocateReservedCopyPool (
+  IN UINTN       AllocationSize,
+  IN CONST VOID  *Buffer
+  )
+{
+  return UncachedInternalAllocateCopyPool (EfiReservedMemoryType, AllocationSize, Buffer);
+}
+
+VOID
+EFIAPI
+UncachedFreePool (
+  IN VOID   *Buffer
+  )
+{
+  UncachedFreeAlignedPool (Buffer);
+}
+
+VOID
+EFIAPI
+UncachedSafeFreePool (
+  IN VOID   *Buffer
+  )
+{
+  if (Buffer != NULL) {
+    UncachedFreePool (Buffer);
+    Buffer = NULL;
+  }
+}
+
diff --git a/Platform/Hisilicon/HiKey/Library/UncachedMemoryAllocationLib/UncachedMemoryAllocationLib.inf b/Platform/Hisilicon/HiKey/Library/UncachedMemoryAllocationLib/UncachedMemoryAllocationLib.inf
new file mode 100644
index 000000000..64edc32cf
--- /dev/null
+++ b/Platform/Hisilicon/HiKey/Library/UncachedMemoryAllocationLib/UncachedMemoryAllocationLib.inf
@@ -0,0 +1,45 @@
+#/** @file
+#
+#  UncachedMemoryAllocation lib that uses DXE Service to change cachability for
+#  a buffer.
+#
+# Copyright (c) 2008 - 2010, Apple Inc. All rights reserved.<BR>
+#
+#  This program and the accompanying materials
+#  are licensed and made available under the terms and conditions of the BSD License
+#  which accompanies this distribution. The full text of the license may be found at
+#  http://opensource.org/licenses/bsd-license.php
+#  THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+#  WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+#
+#
+#**/
+
+[Defines]
+  INF_VERSION                    = 0x00010005
+  BASE_NAME                      = UncachedMemoryAllocationLib
+  FILE_GUID                      = DC101A1A-7525-429B-84AF-EEAA630E576C
+  MODULE_TYPE                    = DXE_DRIVER
+  VERSION_STRING                 = 1.0
+  LIBRARY_CLASS                  = UncachedMemoryAllocationLib
+
+  DESTRUCTOR                     = UncachedMemoryAllocationLibDestructor
+
+[Sources.common]
+  UncachedMemoryAllocationLib.c
+
+[Packages]
+  ArmPkg/ArmPkg.dec
+  MdePkg/MdePkg.dec
+  Platform/Hisilicon/HiKey/HiKey.dec
+
+[LibraryClasses]
+  BaseLib
+  ArmLib
+  MemoryAllocationLib
+  PcdLib
+  DxeServicesTableLib
+  CacheMaintenanceLib
+
+[Pcd]
+  gArmTokenSpaceGuid.PcdArmFreeUncachedMemorySizeThreshold
diff --git a/Silicon/Synopsys/Usb/DwNonPci/DwNonPciUsbDxe.inf b/Silicon/Synopsys/Usb/DwNonPci/DwNonPciUsbDxe.inf
new file mode 100644
index 000000000..0211c937f
--- /dev/null
+++ b/Silicon/Synopsys/Usb/DwNonPci/DwNonPciUsbDxe.inf
@@ -0,0 +1,47 @@
+## @file
+#
+#  Initialize Designware USB controller via dummy PCI device
+#
+#  Copyright (c) 2016, Linaro, Ltd. All rights reserved.<BR>
+#  Copyright (c) 2016, Jeremy Linton
+#
+#  This program and the accompanying materials
+#  are licensed and made available under the terms and conditions of the BSD License
+#  which accompanies this distribution.  The full text of the license may be found at
+#  http://opensource.org/licenses/bsd-license.php
+#
+#  THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+#  WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+#
+##
+
+[Defines]
+  INF_VERSION                    = 0x00010019
+  BASE_NAME                      = DwNonPcieUsbDxe
+  FILE_GUID                      = 298e1629-54bb-4763-8c66-e43f934a555d
+  MODULE_TYPE                    = DXE_DRIVER
+  VERSION_STRING                 = 1.0
+  ENTRY_POINT                    = DwNonPciUsbDxeEntryPoint
+
+[Sources]
+  InitController.c
+
+[Packages]
+  MdeModulePkg/MdeModulePkg.dec
+  MdePkg/MdePkg.dec
+  Silicon/Synopsys/Usb/DwUsbDxe/DwUsbDxe.dec
+
+[LibraryClasses]
+  BaseLib
+  DebugLib
+  IoLib
+  NonDiscoverableDeviceRegistrationLib
+  UefiBootServicesTableLib
+  UefiDriverEntryPoint
+
+[Pcd]
+  gDwUsbDxeTokenSpaceGuid.PcdDwUsbBaseAddress
+  gDwUsbDxeTokenSpaceGuid.PcdDwUsbSysCtrlBaseAddress
+
+[Depex]
+  TRUE
diff --git a/Silicon/Synopsys/Usb/DwNonPci/InitController.c b/Silicon/Synopsys/Usb/DwNonPci/InitController.c
new file mode 100644
index 000000000..832d9dcaf
--- /dev/null
+++ b/Silicon/Synopsys/Usb/DwNonPci/InitController.c
@@ -0,0 +1,37 @@
+/** @file
+  Initialize Designware USB controller via dummy PCI device
+
+  Copyright (c) 2016, Linaro, Ltd. All rights reserved.<BR>
+  Copyright (c) 2016, Jeremy Linton
+
+  This program and the accompanying materials are licensed and made available
+  under the terms and conditions of the BSD License which accompanies this
+  distribution.  The full text of the license may be found at
+  http://opensource.org/licenses/bsd-license.php
+
+  THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+  WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+**/
+
+#include <Library/DebugLib.h>
+#include <Library/IoLib.h>
+#include <Library/NonDiscoverableDeviceRegistrationLib.h>
+#include <Protocol/NonDiscoverableDevice.h>
+
+EFI_STATUS
+EFIAPI
+DwNonPciUsbDxeEntryPoint (
+  IN EFI_HANDLE         ImageHandle,
+  IN EFI_SYSTEM_TABLE   *SystemTable
+  )
+{
+  DEBUG ((EFI_D_ERROR, "DwUsbExportController \n"));
+  return RegisterNonDiscoverableMmioDevice (
+           NonDiscoverableDeviceTypeEhci,
+           NonDiscoverableDeviceDmaTypeNonCoherent,
+           NULL,
+           NULL,
+           1,
+           FixedPcdGet32 (PcdDwUsbBaseAddress), SIZE_256KB,
+		   FixedPcdGet32 (PcdDwUsbSysCtrlBaseAddress), SIZE_8KB);
+}
diff --git a/Silicon/Synopsys/Usb/DwUsbDxe/ComponentName.c b/Silicon/Synopsys/Usb/DwUsbDxe/ComponentName.c
new file mode 100644
index 000000000..53a65bb9b
--- /dev/null
+++ b/Silicon/Synopsys/Usb/DwUsbDxe/ComponentName.c
@@ -0,0 +1,244 @@
+/** @file
+UEFI Component Name and Name2 protocol for Designware USB driver.
+
+Copyright (c) 2013-2015 Intel Corporation.
+Copyright (c) 2017 Jeremy Linton
+
+This program and the accompanying materials
+are licensed and made available under the terms and conditions of the BSD License
+which accompanies this distribution.  The full text of the license may be found at
+http://opensource.org/licenses/bsd-license.php
+
+THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+
+
+#include <Uefi.h>
+
+#include <Protocol/UsbHostController.h>
+#include <Protocol/PciIo.h>
+
+#include <Guid/EventGroup.h>
+
+#include <Library/DebugLib.h>
+#include <Library/BaseMemoryLib.h>
+#include <Library/UefiBootServicesTableLib.h>
+#include <Library/UefiLib.h>
+#include <Library/BaseLib.h>
+#include <Library/MemoryAllocationLib.h>
+
+#include <IndustryStandard/Pci.h>
+
+//#include "Ohci.h"
+#include "ComponentName.h"
+#include "DwUsbDxe.h"
+
+//
+// EFI Component Name Protocol
+//
+GLOBAL_REMOVE_IF_UNREFERENCED EFI_COMPONENT_NAME_PROTOCOL  gOhciComponentName = {
+  OhciComponentNameGetDriverName,
+  OhciComponentNameGetControllerName,
+  "eng"
+};
+
+//
+// EFI Component Name 2 Protocol
+//
+GLOBAL_REMOVE_IF_UNREFERENCED EFI_COMPONENT_NAME2_PROTOCOL gOhciComponentName2 = {
+  (EFI_COMPONENT_NAME2_GET_DRIVER_NAME) OhciComponentNameGetDriverName,
+  (EFI_COMPONENT_NAME2_GET_CONTROLLER_NAME) OhciComponentNameGetControllerName,
+  "en"
+};
+
+
+GLOBAL_REMOVE_IF_UNREFERENCED EFI_UNICODE_STRING_TABLE mOhciDriverNameTable[] = {
+  { "eng;en", L"Designware Usb Driver" },
+  { NULL, NULL }
+};
+
+
+/**
+  Retrieves a Unicode string that is the user readable name of the driver.
+
+  This function retrieves the user readable name of a driver in the form of a
+  Unicode string. If the driver specified by This has a user readable name in
+  the language specified by Language, then a pointer to the driver name is
+  returned in DriverName, and EFI_SUCCESS is returned. If the driver specified
+  by This does not support the language specified by Language,
+  then EFI_UNSUPPORTED is returned.
+
+  @param  This[in]              A pointer to the EFI_COMPONENT_NAME2_PROTOCOL or
+                                EFI_COMPONENT_NAME_PROTOCOL instance.
+
+  @param  Language[in]          A pointer to a Null-terminated ASCII string
+                                array indicating the language. This is the
+                                language of the driver name that the caller is
+                                requesting, and it must match one of the
+                                languages specified in SupportedLanguages. The
+                                number of languages supported by a driver is up
+                                to the driver writer. Language is specified
+                                in RFC 4646 or ISO 639-2 language code format.
+
+  @param  DriverName[out]       A pointer to the Unicode string to return.
+                                This Unicode string is the name of the
+                                driver specified by This in the language
+                                specified by Language.
+
+  @retval EFI_SUCCESS           The Unicode string for the Driver specified by
+                                This and the language specified by Language was
+                                returned in DriverName.
+
+  @retval EFI_INVALID_PARAMETER Language is NULL.
+
+  @retval EFI_INVALID_PARAMETER DriverName is NULL.
+
+  @retval EFI_UNSUPPORTED       The driver specified by This does not support
+                                the language specified by Language.
+
+**/
+EFI_STATUS
+EFIAPI
+OhciComponentNameGetDriverName (
+  IN  EFI_COMPONENT_NAME_PROTOCOL  *This,
+  IN  CHAR8                        *Language,
+  OUT CHAR16                       **DriverName
+  )
+{
+  return LookupUnicodeString2 (
+           Language,
+           This->SupportedLanguages,
+           mOhciDriverNameTable,
+           DriverName,
+           (BOOLEAN)(This == &gOhciComponentName)
+           );
+}
+
+/**
+  Retrieves a Unicode string that is the user readable name of the controller
+  that is being managed by a driver.
+
+  This function retrieves the user readable name of the controller specified by
+  ControllerHandle and ChildHandle in the form of a Unicode string. If the
+  driver specified by This has a user readable name in the language specified by
+  Language, then a pointer to the controller name is returned in ControllerName,
+  and EFI_SUCCESS is returned.  If the driver specified by This is not currently
+  managing the controller specified by ControllerHandle and ChildHandle,
+  then EFI_UNSUPPORTED is returned.  If the driver specified by This does not
+  support the language specified by Language, then EFI_UNSUPPORTED is returned.
+
+  @param  This[in]              A pointer to the EFI_COMPONENT_NAME2_PROTOCOL or
+                                EFI_COMPONENT_NAME_PROTOCOL instance.
+
+  @param  ControllerHandle[in]  The handle of a controller that the driver
+                                specified by This is managing.  This handle
+                                specifies the controller whose name is to be
+                                returned.
+
+  @param  ChildHandle[in]       The handle of the child controller to retrieve
+                                the name of.  This is an optional parameter that
+                                may be NULL.  It will be NULL for device
+                                drivers.  It will also be NULL for a bus drivers
+                                that wish to retrieve the name of the bus
+                                controller.  It will not be NULL for a bus
+                                driver that wishes to retrieve the name of a
+                                child controller.
+
+  @param  Language[in]          A pointer to a Null-terminated ASCII string
+                                array indicating the language.  This is the
+                                language of the driver name that the caller is
+                                requesting, and it must match one of the
+                                languages specified in SupportedLanguages. The
+                                number of languages supported by a driver is up
+                                to the driver writer. Language is specified in
+                                RFC 4646 or ISO 639-2 language code format.
+
+  @param  ControllerName[out]   A pointer to the Unicode string to return.
+                                This Unicode string is the name of the
+                                controller specified by ControllerHandle and
+                                ChildHandle in the language specified by
+                                Language from the point of view of the driver
+                                specified by This.
+
+  @retval EFI_SUCCESS           The Unicode string for the user readable name in
+                                the language specified by Language for the
+                                driver specified by This was returned in
+                                DriverName.
+
+  @retval EFI_INVALID_PARAMETER ControllerHandle is not a valid EFI_HANDLE.
+
+  @retval EFI_INVALID_PARAMETER ChildHandle is not NULL and it is not a valid
+                                EFI_HANDLE.
+
+  @retval EFI_INVALID_PARAMETER Language is NULL.
+
+  @retval EFI_INVALID_PARAMETER ControllerName is NULL.
+
+  @retval EFI_UNSUPPORTED       The driver specified by This is not currently
+                                managing the controller specified by
+                                ControllerHandle and ChildHandle.
+
+  @retval EFI_UNSUPPORTED       The driver specified by This does not support
+                                the language specified by Language.
+
+**/
+EFI_STATUS
+EFIAPI
+OhciComponentNameGetControllerName (
+  IN  EFI_COMPONENT_NAME_PROTOCOL                     *This,
+  IN  EFI_HANDLE                                      ControllerHandle,
+  IN  EFI_HANDLE                                      ChildHandle        OPTIONAL,
+  IN  CHAR8                                           *Language,
+  OUT CHAR16                                          **ControllerName
+  )
+{
+  EFI_STATUS           Status;
+  USB_OHCI_HC_DEV      *OhciDev;
+  EFI_USB_HC_PROTOCOL  *UsbHc;
+
+  //
+  // This is a device driver, so ChildHandle must be NULL.
+  //
+  if (ChildHandle != NULL) {
+    return EFI_UNSUPPORTED;
+  }
+  //
+  // Make sure this driver is currently managing ControllerHandle
+  //
+/*  Status = EfiTestManagedDevice (
+             ControllerHandle,
+             gOhciDriverBinding.DriverBindingHandle,
+             &gEfiPciIoProtocolGuid
+             );
+  if (EFI_ERROR (Status)) {
+    return Status;
+}*/
+  //
+  // Get the device context
+  //
+  Status = gBS->OpenProtocol (
+                  ControllerHandle,
+                  &gEfiUsbHcProtocolGuid,
+                  (VOID **) &UsbHc,
+                  gOhciDriverBinding.DriverBindingHandle,
+                  ControllerHandle,
+                  EFI_OPEN_PROTOCOL_GET_PROTOCOL
+                  );
+  if (EFI_ERROR (Status)) {
+    return Status;
+  }
+
+  OhciDev = USB_OHCI_HC_DEV_FROM_THIS (UsbHc);
+
+  return LookupUnicodeString2 (
+           Language,
+           This->SupportedLanguages,
+           OhciDev->ControllerNameTable,
+           ControllerName,
+           (BOOLEAN)(This == &gOhciComponentName)
+           );
+
+}
diff --git a/Silicon/Synopsys/Usb/DwUsbDxe/ComponentName.h b/Silicon/Synopsys/Usb/DwUsbDxe/ComponentName.h
new file mode 100644
index 000000000..cfc660334
--- /dev/null
+++ b/Silicon/Synopsys/Usb/DwUsbDxe/ComponentName.h
@@ -0,0 +1,148 @@
+/** @file
+UEFI Component Name and Name2 protocol for Designware USB driver.
+
+Copyright (c) 2013-2015 Intel Corporation.
+Copyright (c) 2017 Jeremy Linton
+
+This program and the accompanying materials
+are licensed and made available under the terms and conditions of the BSD License
+which accompanies this distribution.  The full text of the license may be found at
+http://opensource.org/licenses/bsd-license.php
+
+THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+#ifndef _COMPONENT_NAME_H_
+#define _COMPONENT_NAME_H_
+
+
+/**
+  Retrieves a Unicode string that is the user readable name of the driver.
+
+  This function retrieves the user readable name of a driver in the form of a
+  Unicode string. If the driver specified by This has a user readable name in
+  the language specified by Language, then a pointer to the driver name is
+  returned in DriverName, and EFI_SUCCESS is returned. If the driver specified
+  by This does not support the language specified by Language,
+  then EFI_UNSUPPORTED is returned.
+
+  @param  This[in]              A pointer to the EFI_COMPONENT_NAME2_PROTOCOL or
+                                EFI_COMPONENT_NAME_PROTOCOL instance.
+
+  @param  Language[in]          A pointer to a Null-terminated ASCII string
+                                array indicating the language. This is the
+                                language of the driver name that the caller is
+                                requesting, and it must match one of the
+                                languages specified in SupportedLanguages. The
+                                number of languages supported by a driver is up
+                                to the driver writer. Language is specified
+                                in RFC 4646 or ISO 639-2 language code format.
+
+  @param  DriverName[out]       A pointer to the Unicode string to return.
+                                This Unicode string is the name of the
+                                driver specified by This in the language
+                                specified by Language.
+
+  @retval EFI_SUCCESS           The Unicode string for the Driver specified by
+                                This and the language specified by Language was
+                                returned in DriverName.
+
+  @retval EFI_INVALID_PARAMETER Language is NULL.
+
+  @retval EFI_INVALID_PARAMETER DriverName is NULL.
+
+  @retval EFI_UNSUPPORTED       The driver specified by This does not support
+                                the language specified by Language.
+
+**/
+EFI_STATUS
+EFIAPI
+OhciComponentNameGetDriverName (
+  IN  EFI_COMPONENT_NAME_PROTOCOL  *This,
+  IN  CHAR8                        *Language,
+  OUT CHAR16                       **DriverName
+  );
+
+
+/**
+  Retrieves a Unicode string that is the user readable name of the controller
+  that is being managed by a driver.
+
+  This function retrieves the user readable name of the controller specified by
+  ControllerHandle and ChildHandle in the form of a Unicode string. If the
+  driver specified by This has a user readable name in the language specified by
+  Language, then a pointer to the controller name is returned in ControllerName,
+  and EFI_SUCCESS is returned.  If the driver specified by This is not currently
+  managing the controller specified by ControllerHandle and ChildHandle,
+  then EFI_UNSUPPORTED is returned.  If the driver specified by This does not
+  support the language specified by Language, then EFI_UNSUPPORTED is returned.
+
+  @param  This[in]              A pointer to the EFI_COMPONENT_NAME2_PROTOCOL or
+                                EFI_COMPONENT_NAME_PROTOCOL instance.
+
+  @param  ControllerHandle[in]  The handle of a controller that the driver
+                                specified by This is managing.  This handle
+                                specifies the controller whose name is to be
+                                returned.
+
+  @param  ChildHandle[in]       The handle of the child controller to retrieve
+                                the name of.  This is an optional parameter that
+                                may be NULL.  It will be NULL for device
+                                drivers.  It will also be NULL for a bus drivers
+                                that wish to retrieve the name of the bus
+                                controller.  It will not be NULL for a bus
+                                driver that wishes to retrieve the name of a
+                                child controller.
+
+  @param  Language[in]          A pointer to a Null-terminated ASCII string
+                                array indicating the language.  This is the
+                                language of the driver name that the caller is
+                                requesting, and it must match one of the
+                                languages specified in SupportedLanguages. The
+                                number of languages supported by a driver is up
+                                to the driver writer. Language is specified in
+                                RFC 4646 or ISO 639-2 language code format.
+
+  @param  ControllerName[out]   A pointer to the Unicode string to return.
+                                This Unicode string is the name of the
+                                controller specified by ControllerHandle and
+                                ChildHandle in the language specified by
+                                Language from the point of view of the driver
+                                specified by This.
+
+  @retval EFI_SUCCESS           The Unicode string for the user readable name in
+                                the language specified by Language for the
+                                driver specified by This was returned in
+                                DriverName.
+
+  @retval EFI_INVALID_PARAMETER ControllerHandle is not a valid EFI_HANDLE.
+
+  @retval EFI_INVALID_PARAMETER ChildHandle is not NULL and it is not a valid
+                                EFI_HANDLE.
+
+  @retval EFI_INVALID_PARAMETER Language is NULL.
+
+  @retval EFI_INVALID_PARAMETER ControllerName is NULL.
+
+  @retval EFI_UNSUPPORTED       The driver specified by This is not currently
+                                managing the controller specified by
+                                ControllerHandle and ChildHandle.
+
+  @retval EFI_UNSUPPORTED       The driver specified by This does not support
+                                the language specified by Language.
+
+**/
+EFI_STATUS
+EFIAPI
+OhciComponentNameGetControllerName (
+  IN  EFI_COMPONENT_NAME_PROTOCOL                     *This,
+  IN  EFI_HANDLE                                      ControllerHandle,
+  IN  EFI_HANDLE                                      ChildHandle        OPTIONAL,
+  IN  CHAR8                                           *Language,
+  OUT CHAR16                                          **ControllerName
+  );
+
+#endif
+
diff --git a/Silicon/Synopsys/Usb/DwUsbDxe/DwUsbDxe.c b/Silicon/Synopsys/Usb/DwUsbDxe/DwUsbDxe.c
new file mode 100644
index 000000000..6903112f9
--- /dev/null
+++ b/Silicon/Synopsys/Usb/DwUsbDxe/DwUsbDxe.c
@@ -0,0 +1,2324 @@
+/** @file
+
+  Copyright (c) 2015, Linaro Limited. All rights reserved.
+  Copyright (c) 2015, Hisilicon Limited. All rights reserved.
+  Copyright (c) 2017, Jeremy Linton. All rights reserved.
+
+  This program and the accompanying materials
+  are licensed and made available under the terms and conditions of the BSD License
+  which accompanies this distribution.  The full text of the license may be found at
+  http://opensource.org/licenses/bsd-license.php
+
+  THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+  WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+#include <IndustryStandard/Usb.h>
+#include <Library/TimerLib.h>
+#include <Library/DebugLib.h>
+#include <Library/UefiBootServicesTableLib.h>
+#include <Library/UefiDriverEntryPoint.h>
+#include <Library/UefiLib.h>
+#include <Library/UefiRuntimeServicesTableLib.h>
+#include <Library/UefiBootServicesTableLib.h>
+#include <Library/IoLib.h>
+#include <Library/MemoryAllocationLib.h>
+#include <Library/UncachedMemoryAllocationLib.h>
+#include <Library/CacheMaintenanceLib.h>
+#include <Library/BaseMemoryLib.h>
+#include <Library/BaseLib.h>
+#include <Protocol/UsbDevice.h>
+#include <Protocol/UsbHostController.h>
+#include <Protocol/Usb2HostController.h>
+#include <Protocol/PciIo.h>
+#include <IndustryStandard/Pci.h>
+
+#include "DwUsbDxe.h"
+#include "Hi6220.h"
+
+// Blah, the existing hikey driver only works in OTG mode (aka its an endpoint device for fastboot)
+// out of the box this driver configures a made up protocol which
+// setups the port to act as a fastboot programming taget. This sucks!
+#ifdef NOTACTIVE
+
+STATIC dwc_otg_dev_dma_desc_t *g_dma_desc,*g_dma_desc_ep0,*g_dma_desc_in;
+STATIC USB_DEVICE_REQUEST *p_ctrlreq;
+STATIC VOID *rx_buf;
+STATIC UINT32 rx_desc_bytes = 0;
+STATIC UINTN mNumDataBytes;
+
+#define USB_BLOCK_HIGH_SPEED_SIZE    512
+#define DATA_SIZE 32768
+#define CMD_SIZE 512
+#define MATCH_CMD_LITERAL(Cmd, Buf) !AsciiStrnCmp (Cmd, Buf, sizeof (Cmd) - 1)
+
+
+
+STATIC USB_DEVICE_DESCRIPTOR    *mDeviceDescriptor;
+
+// The config descriptor, interface descriptor, and endpoint descriptors in a
+// buffer (in that order)
+STATIC VOID                     *mDescriptors;
+// Convenience pointers to those descriptors inside the buffer:
+STATIC USB_INTERFACE_DESCRIPTOR *mInterfaceDescriptor;
+STATIC USB_CONFIG_DESCRIPTOR    *mConfigDescriptor;
+STATIC USB_ENDPOINT_DESCRIPTOR  *mEndpointDescriptors;
+
+STATIC USB_DEVICE_RX_CALLBACK   mDataReceivedCallback;
+STATIC USB_DEVICE_TX_CALLBACK   mDataSentCallback;
+
+STATIC EFI_USB_STRING_DESCRIPTOR mLangStringDescriptor = {
+  4,
+  USB_DESC_TYPE_STRING,
+  {0x409}
+};
+
+
+// The time between interrupt polls, in units of 100 nanoseconds
+// 10 Microseconds
+#define DW_INTERRUPT_POLL_PERIOD 10000
+STATIC int usb_drv_port_speed(void) /*To detect which mode was run, high speed or full speed*/
+{
+    /*
+    * 2'b00: High speed (PHY clock is running at 30 or 60 MHz)
+    */
+    UINT32 val = READ_REG32(DSTS) & 2;
+    return (!val);
+}
+
+
+
+STATIC VOID reset_endpoints(void)
+{
+  /* EP0 IN ACTIVE NEXT=1 */
+  WRITE_REG32(DIEPCTL0, 0x8800);
+
+  /* EP0 OUT ACTIVE */
+  WRITE_REG32(DOEPCTL0, 0x8000);
+
+  /* Clear any pending OTG Interrupts */
+  WRITE_REG32(GOTGINT, 0xFFFFFFFF);
+
+  /* Clear any pending interrupts */
+  WRITE_REG32(GINTSTS, 0xFFFFFFFF);
+  WRITE_REG32(DIEPINT0, 0xFFFFFFFF);
+  WRITE_REG32(DOEPINT0, 0xFFFFFFFF);
+  WRITE_REG32(DIEPINT1, 0xFFFFFFFF);
+  WRITE_REG32(DOEPINT1, 0xFFFFFFFF);
+
+  /* IN EP interrupt mask */
+  WRITE_REG32(DIEPMSK, 0x0D);
+  /* OUT EP interrupt mask */
+  WRITE_REG32(DOEPMSK, 0x0D);
+  /* Enable interrupts on Ep0 */
+  WRITE_REG32(DAINTMSK, 0x00010001);
+
+  /* EP0 OUT Transfer Size:64 Bytes, 1 Packet, 3 Setup Packet, Read to receive setup packet*/
+  WRITE_REG32(DOEPTSIZ0, 0x60080040);
+
+  //notes that:the compulsive conversion is expectable.
+  g_dma_desc_ep0->status.b.bs = 0x3;
+  g_dma_desc_ep0->status.b.mtrf = 0;
+  g_dma_desc_ep0->status.b.sr = 0;
+  g_dma_desc_ep0->status.b.l = 1;
+  g_dma_desc_ep0->status.b.ioc = 1;
+  g_dma_desc_ep0->status.b.sp = 0;
+  g_dma_desc_ep0->status.b.bytes = 64;
+  g_dma_desc_ep0->buf = (UINT32)(UINTN)(p_ctrlreq);
+  g_dma_desc_ep0->status.b.sts = 0;
+  g_dma_desc_ep0->status.b.bs = 0x0;
+  WRITE_REG32(DOEPDMA0, (unsigned long)(g_dma_desc_ep0));
+  /* EP0 OUT ENABLE CLEARNAK */
+  WRITE_REG32(DOEPCTL0, (READ_REG32(DOEPCTL0) | 0x84000000));
+}
+
+STATIC VOID ep_tx(IN UINT8 ep, CONST VOID *ptr, UINT32 len)
+{
+    UINT32 blocksize;
+    UINT32 packets;
+
+    /* EPx OUT ACTIVE */
+    WRITE_REG32(DIEPCTL(ep), (READ_REG32(DIEPCTL(ep))) | 0x8000);
+    if(!ep) {
+        blocksize = 64;
+    } else {
+        blocksize = usb_drv_port_speed() ? USB_BLOCK_HIGH_SPEED_SIZE : 64;
+    }
+    packets = (len + blocksize - 1) / blocksize;
+
+    if (!len) { //send a null packet
+        /* one empty packet */
+        g_dma_desc_in->status.b.bs = 0x3;
+        g_dma_desc_in->status.b.l = 1;
+        g_dma_desc_in->status.b.ioc = 1;
+        g_dma_desc_in->status.b.sp = 1;
+        g_dma_desc_in->status.b.bytes = 0;
+        g_dma_desc_in->buf = 0;
+        g_dma_desc_in->status.b.sts = 0;
+        g_dma_desc_in->status.b.bs = 0x0;
+
+        WRITE_REG32(DIEPDMA(ep), (unsigned long)(g_dma_desc_in));             // DMA Address (DMAAddr) is zero
+    } else { //prepare to send a packet
+        /*WRITE_REG32((len | (packets << 19)), DIEPTSIZ(ep));*/  // packets+transfer size
+	WRITE_REG32(DIEPTSIZ(ep), len | (packets << 19));
+
+	//flush cache
+	WriteBackDataCacheRange ((void*)ptr, len);
+
+        g_dma_desc_in->status.b.bs = 0x3;
+        g_dma_desc_in->status.b.l = 1;
+        g_dma_desc_in->status.b.ioc = 1;
+        g_dma_desc_in->status.b.sp = 1;
+        g_dma_desc_in->status.b.bytes = len;
+        g_dma_desc_in->buf = (UINT32)((UINTN)ptr);
+        g_dma_desc_in->status.b.sts = 0;
+        g_dma_desc_in->status.b.bs = 0x0;
+        WRITE_REG32(DIEPDMA(ep), (unsigned long)(g_dma_desc_in));         // ptr is DMA address
+    }
+    asm("dsb  sy");
+    asm("isb  sy");
+    /* epena & cnak*/
+    WRITE_REG32(DIEPCTL(ep), READ_REG32(DIEPCTL(ep)) | 0x84000800);
+    return;
+}
+
+STATIC VOID ep_rx(unsigned ep, UINT32 len)
+{
+    /* EPx UNSTALL */
+    WRITE_REG32(DOEPCTL(ep), ((READ_REG32(DOEPCTL(ep))) & (~0x00200000)));
+    /* EPx OUT ACTIVE */
+    WRITE_REG32(DOEPCTL(ep), (READ_REG32(DOEPCTL(ep)) | 0x8000));
+
+    if (len >= DATA_SIZE)
+	    rx_desc_bytes = DATA_SIZE;
+    else
+	    rx_desc_bytes = len;
+
+    rx_buf = AllocatePool (DATA_SIZE);
+    ASSERT (rx_buf != NULL);
+
+    InvalidateDataCacheRange (rx_buf, len);
+
+    g_dma_desc->status.b.bs = 0x3;
+    g_dma_desc->status.b.mtrf = 0;
+    g_dma_desc->status.b.sr = 0;
+    g_dma_desc->status.b.l = 1;
+    g_dma_desc->status.b.ioc = 1;
+    g_dma_desc->status.b.sp = 0;
+    g_dma_desc->status.b.bytes = rx_desc_bytes;
+    g_dma_desc->buf = (UINT32)((UINTN)rx_buf);
+    g_dma_desc->status.b.sts = 0;
+    g_dma_desc->status.b.bs = 0x0;
+
+    asm("dsb  sy");
+    asm("isb  sy");
+    WRITE_REG32(DOEPDMA(ep), (UINT32)((UINTN)g_dma_desc));
+    /* EPx OUT ENABLE CLEARNAK */
+    WRITE_REG32(DOEPCTL(ep), (READ_REG32(DOEPCTL(ep)) | 0x84000000));
+}
+
+STATIC
+EFI_STATUS
+HandleGetDescriptor (
+  IN USB_DEVICE_REQUEST  *Request
+  )
+{
+  UINT8       DescriptorType;
+  UINTN       ResponseSize;
+  VOID       *ResponseData;
+//  CHAR16      SerialNo[16];
+//  UINTN       SerialNoLen;
+//  EFI_STATUS  Status;
+
+  ResponseSize = 0;
+  ResponseData = NULL;
+
+  // Pretty confused if bmRequestType is anything but this:
+  ASSERT (Request->RequestType == USB_DEV_GET_DESCRIPTOR_REQ_TYPE);
+
+  // Choose the response
+  DescriptorType = Request->Value >> 8;
+  switch (DescriptorType) {
+  case USB_DESC_TYPE_DEVICE:
+    DEBUG ((EFI_D_ERROR, "USB: Got a request for device descriptor\n"));
+    ResponseSize = sizeof (USB_DEVICE_DESCRIPTOR);
+    ResponseData = mDeviceDescriptor;
+    break;
+  case USB_DESC_TYPE_CONFIG:
+    DEBUG ((EFI_D_ERROR, "USB: Got a request for config descriptor\n"));
+    ResponseSize = mConfigDescriptor->TotalLength;
+    ResponseData = mDescriptors;
+    break;
+  case USB_DESC_TYPE_STRING:
+    DEBUG ((EFI_D_ERROR, "USB: Got a request for String descriptor %d\n", Request->Value & 0xFF));
+    switch (Request->Value & 0xff) {
+    case 0:
+      ResponseSize = mLangStringDescriptor.Length;
+      ResponseData = &mLangStringDescriptor;
+      break;
+    case 1:
+      ResponseSize = mManufacturerStringDescriptor.Hdr.Length;
+      ResponseData = &mManufacturerStringDescriptor;
+      break;
+    case 2:
+      ResponseSize = mProductStringDescriptor.Hdr.Length;
+      ResponseData = &mProductStringDescriptor;
+      break;
+    case 3:
+/*      Status = gRT->GetVariable (
+                      (CHAR16*)L"SerialNo",
+                      &gArmGlobalVariableGuid,
+                      NULL,
+                      &SerialNoLen,
+                      SerialNo
+                      );
+      if (EFI_ERROR (Status) == 0) {
+        CopyMem (mSerialStringDescriptor.String, SerialNo, SerialNoLen);
+      }
+      ResponseSize = mSerialStringDescriptor.Length;
+      ResponseData = &mSerialStringDescriptor;*/
+      CopyMem (mSerialStringDescriptor.Hdr.String, "12345", 6);
+      ResponseSize = 6;
+      ResponseData = &mSerialStringDescriptor;
+
+      break;
+    }
+    break;
+  default:
+    DEBUG ((EFI_D_ERROR, "USB: Didn't understand request for descriptor 0x%04x\n", Request->Value));
+    break;
+  }
+
+  // Send the response
+  if (ResponseData) {
+    ASSERT (ResponseSize != 0);
+
+    if (Request->Length < ResponseSize) {
+      // Truncate response
+      ResponseSize = Request->Length;
+    } else if (Request->Length > ResponseSize) {
+      DEBUG ((EFI_D_ERROR, "USB: Info: ResponseSize < wLength\n"));
+    }
+
+    ep_tx(0, ResponseData, ResponseSize);
+  }
+
+  return EFI_SUCCESS;
+}
+
+STATIC
+EFI_STATUS
+HandleSetAddress (
+  IN USB_DEVICE_REQUEST  *Request
+  )
+{
+  // Pretty confused if bmRequestType is anything but this:
+  ASSERT (Request->RequestType == USB_DEV_SET_ADDRESS_REQ_TYPE);
+  DEBUG ((EFI_D_ERROR, "USB: Setting address to %d\n", Request->Value));
+  reset_endpoints();
+
+  WRITE_REG32(DCFG, (READ_REG32(DCFG) & ~0x7F0) | (Request->Value << 4));
+  ep_tx(0, 0, 0);
+
+  return EFI_SUCCESS;
+}
+
+int usb_drv_request_endpoint(unsigned int type, int dir)
+{
+  unsigned int ep = 1;    /*FIXME*/
+  int ret;
+  unsigned long newbits;
+  
+  ret = (int)ep | dir;
+  newbits = (type << 18) | 0x10000000;
+  
+  /*
+   * (type << 18):Endpoint Type (EPType)
+   * 0x10000000:Endpoint Enable (EPEna)
+   * 0x000C000:Endpoint Type (EPType);Hardcoded to 00 for control.
+   * (ep<<22):TxFIFO Number (TxFNum)
+   * 0x20000:NAK Status (NAKSts);The core is transmitting NAK handshakes on this endpoint.
+   */
+  if (dir) {  // IN: to host
+  	WRITE_REG32(DIEPCTL(ep), ((READ_REG32(DIEPCTL(ep)))& ~0x000C0000) | newbits | (ep<<22)|0x20000);
+  } else {    // OUT: to device
+  	WRITE_REG32(DOEPCTL(ep), ((READ_REG32(DOEPCTL(ep))) & ~0x000C0000) | newbits);
+  }
+  
+  return ret;
+}
+STATIC
+EFI_STATUS
+HandleSetConfiguration (
+  IN USB_DEVICE_REQUEST  *Request
+  )
+{
+  ASSERT (Request->RequestType == USB_DEV_SET_CONFIGURATION_REQ_TYPE);
+
+  // Cancel all transfers
+  reset_endpoints();
+
+  usb_drv_request_endpoint(2, 0);
+  usb_drv_request_endpoint(2, 0x80);
+
+  WRITE_REG32(DIEPCTL1, (READ_REG32(DIEPCTL1)) | 0x10088800);
+
+  /* Enable interrupts on all endpoints */
+  WRITE_REG32(DAINTMSK, 0xFFFFFFFF);
+
+  ep_rx(1, CMD_SIZE);
+  ep_tx(0, 0, 0);
+  return EFI_SUCCESS;
+}
+
+
+STATIC
+EFI_STATUS
+HandleDeviceRequest (
+  IN USB_DEVICE_REQUEST  *Request
+  )
+{
+  EFI_STATUS  Status;
+
+  switch (Request->Request) {
+  case USB_DEV_GET_DESCRIPTOR:
+    Status = HandleGetDescriptor (Request);
+    break;
+  case USB_DEV_SET_ADDRESS:
+    Status = HandleSetAddress (Request);
+    break;
+  case USB_DEV_SET_CONFIGURATION:
+    Status = HandleSetConfiguration (Request);
+    break;
+  default:
+    DEBUG ((EFI_D_ERROR,
+      "Didn't understand RequestType 0x%x Request 0x%x\n",
+      Request->RequestType, Request->Request));
+      Status = EFI_INVALID_PARAMETER;
+    break;
+  }
+
+  return Status;
+}
+
+
+// Instead of actually registering interrupt handlers, we poll the controller's
+//  interrupt source register in this function.
+STATIC
+VOID
+CheckInterrupts (
+  IN EFI_EVENT  Event,
+  IN VOID      *Context
+  )
+{
+  UINT32 ints = READ_REG32(GINTSTS);    // interrupt register
+  UINT32 epints;
+
+  /*
+   * bus reset
+   * The core sets this bit to indicate that a reset is detected on the USB.
+   */
+  if (ints & 0x1000) {
+	  WRITE_REG32(DCFG, 0x800004);
+	  reset_endpoints();
+  }
+
+  /*
+   * enumeration done, we now know the speed
+   * The core sets this bit to indicate that speed enumeration is complete. The
+   * application must read the Device Status (DSTS) register to obtain the
+   * enumerated speed.
+   */
+  if (ints & 0x2000) {
+	  /* Set up the maximum packet sizes accordingly */
+	  unsigned long maxpacket = usb_drv_port_speed() ? USB_BLOCK_HIGH_SPEED_SIZE : 64;
+	  //Set Maximum In Packet Size (MPS)
+	  WRITE_REG32(DIEPCTL1, ((READ_REG32(DIEPCTL1)) & ~0x000003FF) | maxpacket);
+	  //Set Maximum Out Packet Size (MPS)
+	  WRITE_REG32(DOEPCTL1, ((READ_REG32(DOEPCTL1)) & ~0x000003FF) | maxpacket);
+  }
+
+  /*
+   * IN EP event
+   * The core sets this bit to indicate that an interrupt is pending on one of the IN
+   * endpoints of the core (in Device mode). The application must read the
+   * Device All Endpoints Interrupt (DAINT) register to determine the exact
+   * number of the IN endpoint on which the interrupt occurred, and then read
+   * the corresponding Device IN Endpoint-n Interrupt (DIEPINTn) register to
+   * determine the exact cause of the interrupt. The application must clear the
+   * appropriate status bit in the corresponding DIEPINTn register to clear this bit.
+   */
+  if (ints & 0x40000) {
+	  epints = READ_REG32(DIEPINT0);
+	  WRITE_REG32(DIEPINT0, epints);
+	  if (epints & 0x1) /* Transfer Completed Interrupt (XferCompl) */
+		  DEBUG ((EFI_D_ERROR, "INT: IN TX completed.DIEPTSIZ(0) = 0x%x.\n", READ_REG32(DIEPTSIZ0)));
+
+	  epints = READ_REG32(DIEPINT1);
+	  WRITE_REG32(DIEPINT1, epints);
+	  if (epints & 0x1)
+		  DEBUG ((EFI_D_ERROR, "ep1: IN TX completed\n"));
+  }
+
+  /*
+   * OUT EP event
+   * The core sets this bit to indicate that an interrupt is pending on one of the
+   * OUT endpoints of the core (in Device mode). The application must read the
+   * Device All Endpoints Interrupt (DAINT) register to determine the exact
+   * number of the OUT endpoint on which the interrupt occurred, and then read
+   * the corresponding Device OUT Endpoint-n Interrupt (DOEPINTn) register
+   * to determine the exact cause of the interrupt. The application must clear the
+   * appropriate status bit in the corresponding DOEPINTn register to clear this bit.
+   */
+  if (ints & 0x80000) {
+	  /* indicates the status of an endpoint
+	   * with respect to USB- and AHB-related events. */
+	  epints = READ_REG32(DOEPINT0);
+	  if(epints) {
+		  WRITE_REG32(DOEPINT0, epints);
+		  if (epints & 0x1)
+			  DEBUG ((EFI_D_ERROR,"INT: EP0 RX completed. DOEPTSIZ(0) = 0x%x.\n", READ_REG32(DOEPTSIZ0)));
+		  /*
+		   *
+		   IN Token Received When TxFIFO is Empty (INTknTXFEmp)
+		   * Indicates that an IN token was received when the associated TxFIFO (periodic/nonperiodic)
+		   * was empty. This interrupt is asserted on the endpoint for which the IN token
+		   * was received.
+		   */
+		  if (epints & 0x8) { /* SETUP phase done */
+			  // PRINT_DEBUG("Setup phase \n");
+			  WRITE_REG32(DIEPCTL0, READ_REG32(DIEPCTL0) | 0x08000000);
+			  WRITE_REG32(DOEPCTL0, READ_REG32(DOEPCTL0) | 0x08000000);
+			  /*clear IN EP intr*/
+			  WRITE_REG32(DIEPINT0, 0xffffffff);
+			  HandleDeviceRequest((USB_DEVICE_REQUEST *)p_ctrlreq);
+		  }
+
+		  /* Make sure EP0 OUT is set up to accept the next request */
+		  /* memset(p_ctrlreq, 0, NUM_ENDPOINTS*8); */
+		  WRITE_REG32(DOEPTSIZ0, 0x60080040);
+		  /*
+		   * IN Token Received When TxFIFO is Empty (INTknTXFEmp)
+		   * Indicates that an IN token was received when the associated TxFIFO (periodic/nonperiodic)
+		   * was empty. This interrupt is asserted on the endpoint for which the IN token
+		   * was received.
+		   */
+		  g_dma_desc_ep0->status.b.bs = 0x3;
+		  g_dma_desc_ep0->status.b.mtrf = 0;
+		  g_dma_desc_ep0->status.b.sr = 0;
+		  g_dma_desc_ep0->status.b.l = 1;
+		  g_dma_desc_ep0->status.b.ioc = 1;
+		  g_dma_desc_ep0->status.b.sp = 0;
+		  g_dma_desc_ep0->status.b.bytes = 64;
+		  g_dma_desc_ep0->buf = (UINT32)(UINTN)(p_ctrlreq);
+		  g_dma_desc_ep0->status.b.sts = 0;
+		  g_dma_desc_ep0->status.b.bs = 0x0;
+		  WRITE_REG32(DOEPDMA0, (unsigned long)(g_dma_desc_ep0));
+		  // endpoint enable; clear NAK
+		  WRITE_REG32(DOEPCTL0, 0x84000000);
+	  }
+
+	  epints = (READ_REG32(DOEPINT1));
+	  if(epints) {
+		  WRITE_REG32(DOEPINT1, epints);
+		  /* Transfer Completed Interrupt (XferCompl);Transfer completed */
+		  if (epints & 0x1) {
+			  asm("dsb  sy");
+			  asm("isb  sy");
+
+			  UINT32 bytes = rx_desc_bytes - g_dma_desc->status.b.bytes;
+			  UINT32 len = 0;
+
+			  if (MATCH_CMD_LITERAL ("download", rx_buf)) {
+				  mNumDataBytes = AsciiStrHexToUint64 (rx_buf + sizeof ("download"));
+			  } else {
+				if (mNumDataBytes != 0)
+					mNumDataBytes -= bytes;
+			  }
+
+			  mDataReceivedCallback (bytes, rx_buf);
+
+			  if (mNumDataBytes == 0)
+				  len = CMD_SIZE;
+			  else if (mNumDataBytes > DATA_SIZE)
+				  len = DATA_SIZE;
+			  else
+				  len = mNumDataBytes;
+
+			  ep_rx(1, len);
+		  }
+	  }
+  }
+
+  //WRITE_REG32 clear ints
+  WRITE_REG32(GINTSTS, ints);
+}
+
+EFI_STATUS
+DwUsbSend (
+  IN        UINT8  EndpointIndex,
+  IN        UINTN  Size,
+  IN  CONST VOID  *Buffer
+  )
+{
+    ep_tx(EndpointIndex, Buffer, Size);
+    return 0;
+}
+
+
+STATIC VOID usb_init()
+{
+  VOID* buf;
+
+  buf = UncachedAllocatePages (1);
+  g_dma_desc = buf;
+  g_dma_desc_ep0 = g_dma_desc + sizeof(struct dwc_otg_dev_dma_desc);
+  g_dma_desc_in = g_dma_desc_ep0 + sizeof(struct dwc_otg_dev_dma_desc);
+  p_ctrlreq = (USB_DEVICE_REQUEST *)g_dma_desc_in + sizeof(struct dwc_otg_dev_dma_desc);
+
+  SetMem(g_dma_desc, sizeof(struct dwc_otg_dev_dma_desc), 0);
+  SetMem(g_dma_desc_ep0, sizeof(struct dwc_otg_dev_dma_desc), 0);
+  SetMem(g_dma_desc_in, sizeof(struct dwc_otg_dev_dma_desc), 0);
+
+  /*Reset usb controller.*/
+  /* Wait for AHB master idle */
+  while (!((READ_REG32(GRSTCTL)) & 0x80000000));
+
+  /* OTG: Assert Software Reset */
+  WRITE_REG32(GRSTCTL, 1);
+
+  /* Wait for OTG to ack reset */
+  while ((READ_REG32(GRSTCTL)) & 1);
+
+  /* Wait for OTG AHB master idle */
+  while (!((READ_REG32(GRSTCTL)) & 0x80000000));
+
+  WRITE_REG32(GDFIFOCFG, DATA_FIFO_CONFIG);
+  WRITE_REG32(GRXFSIZ, RX_SIZE);
+  WRITE_REG32(GNPTXFSIZ, ENDPOINT_TX_SIZE);
+  WRITE_REG32(DIEPTXF1, DATA_IN_ENDPOINT_TX_FIFO1);
+
+  /*
+   * set Periodic TxFIFO Empty Level,
+   * Non-Periodic TxFIFO Empty Level,
+   * Enable DMA, Unmask Global Intr
+   */
+  WRITE_REG32(GAHBCFG, 0x1a1);
+
+  /*select 8bit UTMI+, ULPI Inerface*/
+  WRITE_REG32(GUSBCFG, 0x2400);
+
+  /* Detect usb work mode,host or device? */
+  while ((READ_REG32(GINTSTS)) & 1);
+  MicroSecondDelay(1);
+
+  /*Init global and device mode csr register.*/
+  /*set Non-Zero-Length status out handshake */
+  WRITE_REG32(DCFG, 0x800004);
+
+  /* Interrupt unmask: IN event, OUT event, bus reset */
+  WRITE_REG32(GINTMSK, 0xC3C08);
+
+  while ((READ_REG32(GINTSTS)) & 0x2000);
+
+  /* Clear any pending OTG Interrupts */
+  WRITE_REG32(GOTGINT, 0xFFFFFFFF);
+  /* Clear any pending interrupts */
+  WRITE_REG32(GINTSTS, 0xFFFFFFFF);
+  WRITE_REG32(GINTMSK, 0xFFFFFFFF);
+  WRITE_REG32(GOTGINT, READ_REG32(GOTGINT) & (~0x3000));
+  /*endpoint settings cfg*/
+  reset_endpoints();
+
+  /*init finish. and ready to transfer data*/
+
+  /* Soft Disconnect */
+  WRITE_REG32(DCTL, 0x802);
+  MicroSecondDelay(1);
+
+  /* Soft Reconnect */
+  WRITE_REG32(DCTL, 0x800);
+}
+
+
+
+EFI_STATUS
+EFIAPI
+DwUsbStart (
+  IN USB_DEVICE_DESCRIPTOR   *DeviceDescriptor,
+  IN VOID                   **Descriptors,
+  IN USB_DEVICE_RX_CALLBACK   RxCallback,
+  IN USB_DEVICE_TX_CALLBACK   TxCallback
+  )
+{
+  UINT8                    *Ptr;
+  EFI_STATUS                Status;
+  EFI_EVENT                 TimerEvent;
+
+  ASSERT (DeviceDescriptor != NULL);
+  ASSERT (Descriptors[0] != NULL);
+  ASSERT (RxCallback != NULL);
+  ASSERT (TxCallback != NULL);
+
+  usb_init();
+
+  mDeviceDescriptor = DeviceDescriptor;
+  mDescriptors = Descriptors[0];
+
+  // Right now we just support one configuration
+  ASSERT (mDeviceDescriptor->NumConfigurations == 1);
+  // ... and one interface
+  mConfigDescriptor = (USB_CONFIG_DESCRIPTOR *)mDescriptors;
+  ASSERT (mConfigDescriptor->NumInterfaces == 1);
+
+  Ptr = ((UINT8 *) mDescriptors) + sizeof (USB_CONFIG_DESCRIPTOR);
+  mInterfaceDescriptor = (USB_INTERFACE_DESCRIPTOR *) Ptr;
+  Ptr += sizeof (USB_INTERFACE_DESCRIPTOR);
+
+  mEndpointDescriptors = (USB_ENDPOINT_DESCRIPTOR *) Ptr;
+
+  mDataReceivedCallback = RxCallback;
+  mDataSentCallback = TxCallback;
+
+  // Register a timer event so CheckInterupts gets called periodically
+  Status = gBS->CreateEvent (
+                  EVT_TIMER | EVT_NOTIFY_SIGNAL,
+                  TPL_CALLBACK,
+                  CheckInterrupts,
+                  NULL,
+                  &TimerEvent
+                  );
+  ASSERT_EFI_ERROR (Status);
+  if (EFI_ERROR (Status)) {
+    return Status;
+  }
+
+  Status = gBS->SetTimer (
+                  TimerEvent,
+                  TimerPeriodic,
+                  DW_INTERRUPT_POLL_PERIOD
+                  );
+  ASSERT_EFI_ERROR (Status);
+
+  return Status;
+}
+
+USB_DEVICE_PROTOCOL mUsbDevice = {
+  DwUsbStart,
+  DwUsbSend
+};
+
+
+
+
+#endif
+
+
+STATIC VOID phy_init(USB_OHCI_HC_DEV *Ehc)
+{
+  UINT32 val;
+
+  DEBUG ((EFI_D_ERROR, "phy_init() sequence\n"));
+	// setup direction of hub
+	val = GPIO_READ_REG32(GPIODIR);
+  DEBUG ((EFI_D_ERROR, "GPIO0_3=%X DIR=%X CTL=%X\n",	GPIO_READ_REG32(GPIODATA_3),val,GPIO_READ_REG32(GPIOAFSEL)));
+	val |= 0x84;
+	GPIO_WRITE_REG32(GPIODIR,val);
+
+
+	asm("dsb  sy");
+	asm("isb  sy");
+	MicroSecondDelay (1000); 
+	GPIO_WRITE_REG32(GPIODATA_3,1<<3);
+	GPIO_WRITE_REG32(GPIODATA_7,1<<7);
+
+	asm("dsb  sy");
+	asm("isb  sy");
+	MicroSecondDelay (1000); 
+  DEBUG ((EFI_D_ERROR, "GPIO0_3=%X DIR=%X CTL=%X\n",	GPIO_READ_REG32(GPIODATA_3),val,GPIO_READ_REG32(GPIOAFSEL)));
+  DEBUG ((EFI_D_ERROR, "GPIO0=%X\n",	GPIO_READ_REG32(0x3FC)));
+//  DEBUG ((EFI_D_ERROR, "GPIO0_7=%X\n",	GPIO_READ_REG32(GPIODATA_7))); //turn on Hub port
+/*
++STATIC
++VOID
++HiKeyDetectUsbModeInit (
++  IN VOID
++  )
++{
++  EFI_STATUS     Status;
++
++   //set pullup on both GPIO2_5 & GPIO2_6. It's required for inupt. 
++  MmioWrite32 (0xf8001864, 1);
++  MmioWrite32 (0xf8001868, 1);
++
++  Status = gBS->LocateProtocol (&gEmbeddedGpioProtocolGuid, NULL, (VOID **)&mGpio);
++  ASSERT_EFI_ERROR (Status);
++  Status = mGpio->Set (mGpio, USB_SEL_GPIO0_3, GPIO_MODE_OUTPUT_0);
++  ASSERT_EFI_ERROR (Status);
++  Status = mGpio->Set (mGpio, USB_5V_HUB_EN, GPIO_MODE_OUTPUT_0);
++  ASSERT_EFI_ERROR (Status);
++  MicroSecondDelay (1000);
++
++  Status = mGpio->Set (mGpio, USB_ID_DET_GPIO2_5, GPIO_MODE_INPUT);
++  ASSERT_EFI_ERROR (Status);
++  Status = mGpio->Set (mGpio, USB_VBUS_DET_GPIO2_6, GPIO_MODE_INPUT);
++  ASSERT_EFI_ERROR (Status);
++} */
+
+  //setup clock
+  val = PHY_READ_REG32(SC_PERIPH_CLKEN0);
+  val |= BIT4;
+  PHY_WRITE_REG32(SC_PERIPH_CLKEN0, val);
+
+	do {
+     val = PHY_READ_REG32(SC_PERIPH_CLKSTAT0);
+	} while ((val & BIT4) == 0);
+
+  // setup phy (this is just hi6220_phy_init() minus the "reset enable"?
+	// AKA looks like its just pulling the phy out of reset
+  val = PHY_READ_REG32(SC_PERIPH_RSTDIS0);
+  val |= RST0_USBOTG_BUS | RST0_POR_PICOPHY |  RST0_USBOTG | RST0_USBOTG_32K;
+  PHY_WRITE_REG32(SC_PERIPH_RSTDIS0, val);
+
+	// this is the "on" mode from linux hi6220_phy_setup()
+  val = PHY_READ_REG32(SC_PERIPH_CTRL5);
+  val &= ~CTRL5_PICOPHY_BC_MODE;
+  val |= CTRL5_USBOTG_RES_SEL | CTRL5_PICOPHY_ACAENB; //newer HIsi edk has this | CTRL5_PICOPHY_VDATDETENB | CTRL5_PICOPHY_DCDENB; ;
+  PHY_WRITE_REG32(SC_PERIPH_CTRL5, val);
+
+  val = PHY_READ_REG32(SC_PERIPH_CTRL4);
+  val &=  ~(CTRL4_PICO_SIDDQ | CTRL4_PICO_OGDISABLE);
+  val |=  CTRL4_PICO_VBUSVLDEXT | CTRL4_PICO_VBUSVLDEXTSEL |  CTRL4_OTG_PHY_SEL;
+  PHY_WRITE_REG32(SC_PERIPH_CTRL4, val);
+
+  PHY_WRITE_REG32(SC_PERIPH_CTRL8, EYE_PATTERN_PARA);
+}
+
+// Try to get the controller inited, the appropriate linux function
+// is probably dwc2_core_host_init()
+STATIC VOID DwHostInit(USB_OHCI_HC_DEV *Ehc)
+{
+	UINT32 reg;
+
+		// rpi needs the USB controller powered?
+		// do we?
+	  // play with PCGCCTL 
+/*    status = dwc_power_on();
+    if (status != USB_STATUS_SUCCESS)
+    {
+        return status;
+				}*/
+
+	DEBUG ((EFI_D_ERROR, "DwHostInit reset\n"));
+  /*Reset usb controller.*/
+	/* Wait for AHB master idle */
+	while (!((READ_REG32(GRSTCTL)) & GRSTCTL_AHBIDLE));
+  /* Assert Software Reset */
+  WRITE_REG32(GRSTCTL, GRSTCTL_CSFTRST);
+  /* Wait for ack reset */
+  while ((READ_REG32(GRSTCTL)) & GRSTCTL_CSFTRST);
+	/* Wait for AHB master idle */
+	while (!((READ_REG32(GRSTCTL)) & GRSTCTL_AHBIDLE));
+
+	// version
+	reg=READ_REG32(GSNPSID); //global rx fifo size
+	DEBUG ((EFI_D_ERROR, "DwHostInit version %X\n",reg));
+
+	DEBUG ((EFI_D_ERROR, "DwHostInit setup dma\n"));
+	reg=READ_REG32(GRXFSIZ); //global rx fifo size
+	DEBUG ((EFI_D_ERROR, "DwHostInit global rx fifo size 0x%X\n",reg));
+	reg=READ_REG32(GNPTXFSIZ); //global np tx fifo size
+	DEBUG ((EFI_D_ERROR, "DwHostInit global np tx fifo size 0x%X\n",reg));
+	reg=READ_REG32(HPTXFSIZ); //global tx fifo size
+	DEBUG ((EFI_D_ERROR, "DwHostInit global tx fifo size 0x%X\n",reg));
+	reg=READ_REG32(GNPTXSTS); //global np tx fifo status
+	DEBUG ((EFI_D_ERROR, "DwHostInit global np tx fifo status 0x%X\n",reg));
+
+	reg=READ_REG32(GAHBCFG);
+	DEBUG ((EFI_D_ERROR, "DwHostInit global AHB config 0x%X\n",reg));
+	reg |= GAHBCFG_DMA_EN;
+  WRITE_REG32(GAHBCFG, reg);
+	
+//    dwc_soft_reset();
+//    dwc_setup_dma_mode();
+//    dwc_setup_interrupts();
+//    status = dwc_start_xfer_scheduler();
+/*    if (status != USB_STATUS_SUCCESS)
+    {
+        dwc_power_off();
+				}*/
+}
+
+// Compare with dwc2_hc_init()
+// Can we get away with just using a single channel?
+// after all, we only want sync request/response type 
+// behavior....
+STATIC EFI_STATUS DwChannelInit(USB_OHCI_HC_DEV *Ehc, int DevAddr, int EpNum, EFI_USB_DATA_DIRECTION EpDir, BOOLEAN Slow, UINT8 Type, UINT8 MaxPacket)
+{
+  UINT32 hcchar;
+	int channel = 0;
+	hcchar  = DevAddr   << HCCHAR_DEVADDR_SHIFT & HCCHAR_DEVADDR_MASK;
+	hcchar |= EpNum     << HCCHAR_EPNUM_SHIFT   & HCCHAR_EPNUM_MASK;
+	hcchar |= Type      << HCCHAR_EPTYPE_SHIFT  & HCCHAR_EPTYPE_MASK;
+	hcchar |= MaxPacket << HCCHAR_MPS_SHIFT     & HCCHAR_MPS_MASK;
+
+	if (EpDir == EfiUsbDataIn)	{
+		hcchar |= HCCHAR_EPDIR;
+	}
+	if (Slow)	{
+		hcchar |= HCCHAR_LSPDDEV;
+	}
+	hcchar |= (READ_REG32(HFNUM) +1) & 1; //set odd frame???
+	hcchar |= HCCHAR_CHENA; // enable channel, disable is already cleared
+
+	WRITE_REG32(HCINT(channel), 0);             //clear existing channel status
+	WRITE_REG32(HCINTMSK(channel), 0xFFFFFFFF); //enable all status flags
+  WRITE_REG32(HCCHAR(channel),  hcchar);
+
+	return EFI_SUCCESS;
+}
+
+
+
+/**
+  Provides software reset for the USB host controller.
+
+  @param  This                  This EFI_USB_HC_PROTOCOL instance.
+  @param  Attributes            A bit mask of the reset operation to perform.
+
+  @retval EFI_SUCCESS           The reset operation succeeded.
+  @retval EFI_INVALID_PARAMETER Attributes is not valid.
+  @retval EFI_UNSUPPOURTED      The type of reset specified by Attributes is
+                                not currently supported by the host controller.
+  @retval EFI_DEVICE_ERROR      Host controller isn't halted to reset.
+
+**/
+EFI_STATUS
+EFIAPI
+OhciReset (
+  IN EFI_USB_HC_PROTOCOL  *This,
+  IN UINT16               Attributes
+  )
+{
+  DEBUG ((EFI_D_ERROR, "USB: OhciReset\n"));
+  return EFI_SUCCESS;
+}
+
+/**
+  Retrieve the current state of the USB host controller.
+
+  @param  This                  This EFI_USB_HC_PROTOCOL instance.
+  @param  State                 Variable to return the current host controller
+                                state.
+
+  @retval EFI_SUCCESS           Host controller state was returned in State.
+  @retval EFI_INVALID_PARAMETER State is NULL.
+  @retval EFI_DEVICE_ERROR      An error was encountered while attempting to
+                                retrieve the host controller's current state.
+
+**/
+
+EFI_STATUS
+EFIAPI
+OhciGetState (
+  IN  EFI_USB_HC_PROTOCOL  *This,
+  OUT EFI_USB_HC_STATE     *State
+  )
+{
+  DEBUG ((EFI_D_ERROR, "USB: OhciGetState\n"));
+	return EFI_SUCCESS;
+}
+
+/**
+  Sets the USB host controller to a specific state.
+
+  @param  This                  This EFI_USB_HC_PROTOCOL instance.
+  @param  State                 The state of the host controller that will be set.
+
+  @retval EFI_SUCCESS           The USB host controller was successfully placed
+                                in the state specified by State.
+  @retval EFI_INVALID_PARAMETER State is invalid.
+  @retval EFI_DEVICE_ERROR      Failed to set the state due to device error.
+
+**/
+
+EFI_STATUS
+EFIAPI
+OhciSetState(
+  IN EFI_USB_HC_PROTOCOL  *This,
+  IN EFI_USB_HC_STATE     State
+  )
+{
+  DEBUG ((EFI_D_ERROR, "USB: OhciSetState\n"));
+	return EFI_SUCCESS;
+}
+
+/**
+
+  Submits control transfer to a target USB device.
+
+  @param  This                  A pointer to the EFI_USB_HC_PROTOCOL instance.
+  @param  DeviceAddress         Represents the address of the target device on the USB,
+                                which is assigned during USB enumeration.
+  @param  IsSlowDevice          Indicates whether the target device is slow device
+                                or full-speed device.
+  @param  MaxPaketLength        Indicates the maximum packet size that the
+                                default control transfer endpoint is capable of
+                                sending or receiving.
+  @param  Request               A pointer to the USB device request that will be sent
+                                to the USB device.
+  @param  TransferDirection     Specifies the data direction for the transfer.
+                                There are three values available, DataIn, DataOut
+                                and NoData.
+  @param  Data                  A pointer to the buffer of data that will be transmitted
+                                to USB device or received from USB device.
+  @param  DataLength            Indicates the size, in bytes, of the data buffer
+                                specified by Data.
+  @param  TimeOut               Indicates the maximum time, in microseconds,
+                                which the transfer is allowed to complete.
+  @param  TransferResult        A pointer to the detailed result information generated
+                                by this control transfer.
+
+  @retval EFI_SUCCESS           The control transfer was completed successfully.
+  @retval EFI_OUT_OF_RESOURCES  The control transfer could not be completed due to a lack of resources.
+  @retval EFI_INVALID_PARAMETER Some parameters are invalid.
+  @retval EFI_TIMEOUT           The control transfer failed due to timeout.
+  @retval EFI_DEVICE_ERROR      The control transfer failed due to host controller or device error.
+                                Caller should check TranferResult for detailed error information.
+
+--*/
+
+void DumpRequest(EFI_USB_DEVICE_REQUEST *Request)
+{
+	if (Request->RequestType & 0x80) {
+		DEBUG ((EFI_D_ERROR, "USB: RequestType %X -> Host\n",Request->RequestType));
+	}
+	else {
+		DEBUG ((EFI_D_ERROR, "USB: RequestType %X -> Device\n",Request->RequestType));
+	}
+	if (Request->RequestType & 0x60)	{
+		DEBUG ((EFI_D_ERROR, "USB:                -> CLS/VEND\n"));
+	}
+	else	{
+  	DEBUG ((EFI_D_ERROR, "USB:                -> STD\n"));
+	}
+	switch (Request->RequestType & 0x03)	{
+ 	  case USB_TARGET_DEVICE:
+  	  DEBUG ((EFI_D_ERROR, "USB:                -> DEVICE\n"));
+			break;
+ 	  case USB_TARGET_INTERFACE:
+  	  DEBUG ((EFI_D_ERROR, "USB:                -> ITERFACE\n"));
+			break;
+ 	  case USB_TARGET_ENDPOINT:
+  	  DEBUG ((EFI_D_ERROR, "USB:                -> ENDPOINT\n"));
+			break;
+ 	  case USB_TARGET_OTHER:
+  	  DEBUG ((EFI_D_ERROR, "USB:                -> OTHER\n"));
+			break;
+	}
+	DEBUG ((EFI_D_ERROR, "USB: RequestType 0x%X\n",Request->RequestType));
+  switch (Request->Request)	{
+		case USB_DEV_GET_STATUS:
+			DEBUG ((EFI_D_ERROR, "USB:             GET STATUS\n"));
+			break;
+		case USB_DEV_CLEAR_FEATURE:
+			DEBUG ((EFI_D_ERROR, "USB:             CLEAR FEATURE\n"));
+			break;
+		case USB_DEV_SET_FEATURE:
+			DEBUG ((EFI_D_ERROR, "USB:             SET FEATURE\n"));
+			break;
+		case USB_DEV_SET_ADDRESS:
+			DEBUG ((EFI_D_ERROR, "USB:             SET ADDRESS\n"));
+			break;
+		case USB_DEV_GET_DESCRIPTOR:
+			DEBUG ((EFI_D_ERROR, "USB:             GET DESCRIPTOR\n"));
+			break;
+		case USB_DEV_SET_DESCRIPTOR:
+			DEBUG ((EFI_D_ERROR, "USB:             SET DESCRIPTOR\n"));
+			break;
+		default:
+			break;
+	}
+	DEBUG ((EFI_D_ERROR, "USB: Request     %d\n",Request->Request));
+	DEBUG ((EFI_D_ERROR, "USB: Value       0x%X\n",Request->Value));
+	DEBUG ((EFI_D_ERROR, "USB: Index       0x%X\n",Request->Index));
+	DEBUG ((EFI_D_ERROR, "USB: Length      %d\n",Request->Length));
+}
+
+STATIC USB_DEVICE_DESCRIPTOR RootDevDescriptor = 
+{
+		.Length = sizeof(USB_DEVICE_DESCRIPTOR),
+		.DescriptorType = USB_DESC_TYPE_DEVICE,
+		.BcdUSB = 0x200,
+		.DeviceClass = 0x09, //TYPE HUB
+		.DeviceSubClass = 0,
+		.DeviceProtocol = 1,
+		.MaxPacketSize0 = 18,
+		.IdVendor = 0,
+		.IdProduct = 2,
+		.BcdDevice = 0,
+		.StrManufacturer = 0,
+		.StrProduct = 1,
+		.StrSerialNumber = 2,
+		.NumConfigurations = 1
+};
+
+STATIC struct ROOT_HUB_CFG 
+{
+		USB_CONFIG_DESCRIPTOR RootCfgDescriptor;
+		USB_INTERFACE_DESCRIPTOR RootIntDescriptor;
+		USB_ENDPOINT_DESCRIPTOR RootEndDescriptor;
+} RootCfg =
+{
+	.RootCfgDescriptor =
+	{
+		.Length = sizeof(USB_CONFIG_DESCRIPTOR),
+		.DescriptorType = USB_DESC_TYPE_CONFIG,
+		.TotalLength = sizeof(struct ROOT_HUB_CFG),
+		.NumInterfaces = 1,
+		.ConfigurationValue = 1,
+		.Configuration = 0 ,
+		.Attributes = 0xC0,
+		.MaxPower = 0
+	},
+	.RootIntDescriptor = 
+	{
+		.Length = sizeof(USB_INTERFACE_DESCRIPTOR),
+		.DescriptorType = USB_DESC_TYPE_INTERFACE,
+		.InterfaceNumber = 0,
+		.AlternateSetting = 0,
+		.NumEndpoints = 1,
+		.InterfaceClass = 0x09, //hub
+		.InterfaceSubClass = 0,
+		.InterfaceProtocol = 0,
+		.Interface = 0
+	},
+	.RootEndDescriptor = 
+	{
+		.Length = sizeof(USB_ENDPOINT_DESCRIPTOR),
+		.DescriptorType = USB_DESC_TYPE_ENDPOINT,
+		.EndpointAddress = 0x81,
+		.Attributes = 0x03,
+		.MaxPacketSize = 64,
+		.Interval = 0xFF
+	},
+};
+
+typedef struct {
+  EFI_USB_STRING_DESCRIPTOR Hdr;
+  CHAR16 buf[16];
+} DEF_EFI_USB_STRING_DESCRIPTOR;
+
+STATIC DEF_EFI_USB_STRING_DESCRIPTOR mManufacturerStringDescriptor = {
+  { 
+	18,
+    USB_DESC_TYPE_STRING,
+    {'9'}
+  }, 
+  {'6', 'B', 'o', 'a', 'r', 'd', 's'}
+};
+
+STATIC DEF_EFI_USB_STRING_DESCRIPTOR mProductStringDescriptor = {
+  {
+    12,
+    USB_DESC_TYPE_STRING,
+	{'H'}
+  }, 
+  {'i', 'K', 'e', 'y'}
+};
+
+STATIC DEF_EFI_USB_STRING_DESCRIPTOR mSerialStringDescriptor = {
+  {
+    34,
+    USB_DESC_TYPE_STRING,
+    {'0'}
+  },
+  {'1','2','3','4','5','6','7','8','9','A','B','C','D','E','F'}
+};
+
+
+
+
+EFI_STATUS
+EFIAPI
+OhciControlTransfer (
+  IN     EFI_USB_HC_PROTOCOL     *This,
+  IN     UINT8                   DeviceAddress,
+  IN     BOOLEAN                 IsSlowDevice,
+  IN     UINT8                   MaxPacketLength,
+  IN     EFI_USB_DEVICE_REQUEST  *Request,
+  IN     EFI_USB_DATA_DIRECTION  TransferDirection,
+  IN OUT VOID                    *Data                 OPTIONAL,
+  IN OUT UINTN                   *DataLength           OPTIONAL,
+  IN     UINTN                   TimeOut,
+  OUT    UINT32                  *TransferResult
+  )
+{
+  int handled = 0;
+  static int first = 1;
+#define ENABLE_EMULATION 20
+  DEBUG ((EFI_D_ERROR, "USB: OhciControlTransfer (addr:%d) (direction:%d) Len:%d\n",DeviceAddress,TransferDirection,*DataLength));
+
+  DumpRequest(Request);
+  if ((DeviceAddress == 0+ENABLE_EMULATION) && (first))
+  {
+		  // ignore first set addr
+		  first = 0;
+		  handled = 1;
+		  DEBUG ((EFI_D_ERROR, "USB: OhciControlTransfer, ignore first set addr for root port\n"));
+  }
+  if (DeviceAddress == 1+ENABLE_EMULATION) { //root port fake response
+	  if (Request->RequestType == 0x80) { //device to host
+		  if (Request->Request == USB_DEV_GET_DESCRIPTOR)	{
+				DEBUG ((EFI_D_ERROR, "USB: OhciControlTransfer get descriptor\n"));
+			  if ((Request->Value & 0xFF) == 0)
+			  {
+				  switch (Request->Value >> 8) {
+					  case USB_DESC_TYPE_DEVICE:
+						CopyMem (Data, &RootDevDescriptor, *DataLength);
+						  handled = 1;
+						  break;
+					  case USB_DESC_TYPE_CONFIG:
+						  CopyMem (Data, &RootCfg, *DataLength);
+						  handled = 1;
+						  break;
+					  case USB_DESC_TYPE_STRING:
+						  switch (Request->Index)
+						  {
+						  case 0:
+							  CopyMem (Data, &mManufacturerStringDescriptor, *DataLength);
+						    handled = 1;
+							  break;
+						  case 1:
+							  CopyMem (Data, &mProductStringDescriptor, *DataLength);
+								handled = 1;
+							  break;
+						  case 2:
+							  CopyMem (Data, &mSerialStringDescriptor, *DataLength);
+								handled = 1;
+							  break;
+
+						  }
+						  break;
+				  }
+			  }
+		  }
+	  }
+		if (Request->RequestType == 0) //host to device
+		{
+			if (Request->Request == USB_DEV_SET_CONFIGURATION)
+			{
+					DEBUG ((EFI_D_ERROR, "USB: OhciControlTransfer Set configuration\n"));
+					handled = 1;
+			}
+		}
+	}
+
+  if (!handled) {
+		USB_OHCI_HC_DEV *Ehc;
+		UINT64 addr; 
+		UINT32 transfer;
+
+		EFI_PHYSICAL_ADDRESS  BusPhysAddr;
+		UINTN                 BusLength;
+		VOID                  *Mapping;
+		EFI_STATUS            Status;
+
+
+		DEBUG ((EFI_D_ERROR, "USB: OhciControlTransfer forward to (slow=%d) (MaxTransfer=%d) bus\n",IsSlowDevice,MaxPacketLength));
+		Ehc = USB_OHCI_HC_DEV_FROM_THIS (This);
+
+		BusLength = sizeof(EFI_USB_DEVICE_REQUEST);
+		Status = Ehc->PciIo->Map(Ehc->PciIo, EfiPciIoOperationBusMasterRead, Request, &BusLength, &BusPhysAddr, &Mapping);
+    if (EFI_ERROR (Status)) {
+      DEBUG ((EFI_D_ERROR, "Usb: Map DMA failed\n"));
+    }
+
+		addr = BusPhysAddr;
+		DEBUG ((EFI_D_ERROR, "USB: OhciControlTransfer 1 DMAADDR=%X BUSADDR=%X\n",Request,addr));
+		// Ek gad, really? Split each control transfer into its phases? (see dwc2_hc_init_xfer)
+		// SETUP->DATA->STATUS
+//		ASSERT(Request<32bit);
+		WRITE_REG32(HCDMA(0), (UINT32)addr);
+		transfer = TSIZ_SC_MC_PID_SETUP<<TSIZ_SC_MC_PID_SHIFT;
+		transfer |= sizeof(EFI_USB_DEVICE_REQUEST)<<TSIZ_XFERSIZE_SHIFT;
+		transfer |= 1 << TSIZ_PKTCNT_SHIFT;
+		WRITE_REG32(HCTSIZ(0),transfer);
+
+
+
+		DEBUG ((EFI_D_ERROR, "USB: OhciControlTransfer 2\n"));
+//		DwChannelInit(Ehc, DeviceAddress, 0 , EfiUsbDataIn, IsSlowDevice, USB_ENDPOINT_XFER_CONTROL, MaxPacketLength);
+		DwChannelInit(Ehc, DeviceAddress, 0 , EfiUsbNoData, IsSlowDevice, USB_ENDPOINT_XFER_CONTROL, MaxPacketLength);
+		DEBUG ((EFI_D_ERROR, "USB: OhciControlTransfer 3\n"));
+		DEBUG ((EFI_D_ERROR, "USB: OhciControlTransfer Status = %X\n",READ_REG32(HCINT(0))));
+		while (READ_REG32(HCINT(0))==0); 
+		DEBUG ((EFI_D_ERROR, "USB: OhciControlTransfer Status = %X pkt_remaining = %d \n",READ_REG32(HCINT(0)), READ_REG32(HCTSIZ(0))));
+		DEBUG ((EFI_D_ERROR, "USB: OhciControlTransfer 4\n"));
+
+    Status = Ehc->PciIo->Unmap (Ehc->PciIo, Mapping);
+    if (EFI_ERROR (Status)) {
+      DEBUG ((EFI_D_ERROR, "Usb: failed to Unmap DMA\n"));
+    }
+
+
+		// word aligned buffer can go directly to HCDMA
+		// packet count = 1, send 'Request'
+		// wait for complete packet
+		if (*DataLength)
+		{
+				// do the data phase.
+				BusLength = *DataLength;
+				Mapping = NULL;
+				Status = Ehc->PciIo->Map(Ehc->PciIo, EfiPciIoOperationBusMasterCommonBuffer , Data, &BusLength, &BusPhysAddr, &Mapping);
+				if (EFI_ERROR (Status)) {
+						DEBUG ((EFI_D_ERROR, "Usb: Map DMA failed\n"));
+				}
+				
+				addr = BusPhysAddr;
+
+//				addr=(UINT64)Data;
+				DEBUG ((EFI_D_ERROR, "USB: OhciControlTransfer 6 datap=%X\n",addr));
+				WRITE_REG32(HCDMA(0), (UINT32)addr);
+				transfer = TSIZ_SC_MC_PID_DATA0<<TSIZ_SC_MC_PID_SHIFT;
+				transfer |= *DataLength<<TSIZ_XFERSIZE_SHIFT;
+				transfer |= 1 << TSIZ_PKTCNT_SHIFT;
+				WRITE_REG32(HCTSIZ(0),transfer);
+		
+
+				DwChannelInit(Ehc, DeviceAddress, 0 , TransferDirection, IsSlowDevice, USB_ENDPOINT_XFER_CONTROL, MaxPacketLength);
+				DEBUG ((EFI_D_ERROR, "USB: OhciControlTransfer Status = %X\n",READ_REG32(HCINT(0))));
+				while (READ_REG32(HCINT(0))==0); 
+				DEBUG ((EFI_D_ERROR, "USB: OhciControlTransfer Status = %X pkt_remaining = %d \n",READ_REG32(HCINT(0)), READ_REG32(HCTSIZ(0))));
+				Status = Ehc->PciIo->Unmap (Ehc->PciIo, Mapping);
+				if (EFI_ERROR (Status)) {
+						DEBUG ((EFI_D_ERROR, "Usb: failed to Unmap DMA\n"));
+				}
+
+		}
+
+		// do the status phase
+		// status flows in the oposite direction of data
+		if (TransferDirection == EfiUsbDataIn) {
+				TransferDirection = EfiUsbDataOut;
+		}
+		else	{
+				TransferDirection = EfiUsbDataIn;
+		}
+
+		*TransferResult=0;
+
+		BusLength = 4;
+		Status = Ehc->PciIo->Map(Ehc->PciIo, EfiPciIoOperationBusMasterWrite , TransferResult , &BusLength, &BusPhysAddr, &Mapping);
+		if (EFI_ERROR (Status)) {
+				DEBUG ((EFI_D_ERROR, "Usb: Map DMA failed\n"));
+		}
+		
+		addr = BusPhysAddr;
+
+//		addr=(UINT64)TransferResult;
+		WRITE_REG32(HCDMA(0), (UINT32)addr);
+		transfer = TSIZ_SC_MC_PID_DATA1<<TSIZ_SC_MC_PID_SHIFT;
+		transfer |= 0<<TSIZ_XFERSIZE_SHIFT;
+		transfer |= 1 << TSIZ_PKTCNT_SHIFT;
+		WRITE_REG32(HCTSIZ(0),transfer);
+		DwChannelInit(Ehc, DeviceAddress, 0 , TransferDirection, IsSlowDevice, USB_ENDPOINT_XFER_CONTROL, MaxPacketLength);
+		DEBUG ((EFI_D_ERROR, "USB: OhciControlTransfer Status = %X\n",READ_REG32(HCINT(0))));
+		while (READ_REG32(HCINT(0))==0); 
+
+		Status = Ehc->PciIo->Unmap (Ehc->PciIo, Mapping);
+		if (EFI_ERROR (Status)) {
+				DEBUG ((EFI_D_ERROR, "Usb: failed to Unmap DMA\n"));
+		}
+
+		DEBUG ((EFI_D_ERROR, "USB: OhciControlTransfer Status = %X pkt_remaining = %d \n",READ_REG32(HCINT(0)), READ_REG32(HCTSIZ(0))));
+		DEBUG ((EFI_D_ERROR, "USB: OhciControlTransfer Status = %X tdata =%X\n",READ_REG32(HCINT(0)),*TransferResult ));
+		// packet count = DataLength/Maxpacket (+1) send/recv 'Data'
+		// wait from complete
+		// (other direction for status)
+		//DwChannelInit(Ehc, DeviceAddress, 0 , TransferDirection, IsSlowDevice, USB_ENDPOINT_XFER_CONTROL, MaxPacketLength);
+  }
+
+  return EFI_SUCCESS;
+}
+
+
+/**
+
+  Submits bulk transfer to a bulk endpoint of a USB device.
+
+  @param  This                  A pointer to the EFI_USB_HC_PROTOCOL instance.
+  @param  DeviceAddress         Represents the address of the target device on the USB,
+                                which is assigned during USB enumeration.
+  @param  EndPointAddress       The combination of an endpoint number and an
+                                endpoint direction of the target USB device.
+                                Each endpoint address supports data transfer in
+                                one direction except the control endpoint
+                                (whose default endpoint address is 0).
+                                It is the caller's responsibility to make sure that
+                                the EndPointAddress represents a bulk endpoint.
+  @param  MaximumPacketLength   Indicates the maximum packet size the target endpoint
+                                is capable of sending or receiving.
+  @param  Data                  A pointer to the buffer of data that will be transmitted
+                                to USB device or received from USB device.
+  @param  DataLength            When input, indicates the size, in bytes, of the data buffer
+                                specified by Data. When output, indicates the actually
+                                transferred data size.
+  @param  DataToggle            A pointer to the data toggle value. On input, it indicates
+                                the initial data toggle value the bulk transfer should adopt;
+                                on output, it is updated to indicate the data toggle value
+                                of the subsequent bulk transfer.
+  @param  TimeOut               Indicates the maximum time, in microseconds, which the
+                                transfer is allowed to complete.
+  TransferResult                A pointer to the detailed result information of the
+                                bulk transfer.
+
+  @retval EFI_SUCCESS           The bulk transfer was completed successfully.
+  @retval EFI_OUT_OF_RESOURCES  The bulk transfer could not be submitted due to lack of resource.
+  @retval EFI_INVALID_PARAMETER Some parameters are invalid.
+  @retval EFI_TIMEOUT           The bulk transfer failed due to timeout.
+  @retval EFI_DEVICE_ERROR      The bulk transfer failed due to host controller or device error.
+                                Caller should check TranferResult for detailed error information.
+
+**/
+
+
+EFI_STATUS
+EFIAPI
+OhciBulkTransfer(
+  IN     EFI_USB_HC_PROTOCOL  *This,
+  IN     UINT8                DeviceAddress,
+  IN     UINT8                EndPointAddress,
+  IN     UINT8                MaxPacketLength,
+  IN OUT VOID                 *Data,
+  IN OUT UINTN                *DataLength,
+  IN OUT UINT8                *DataToggle,
+  IN     UINTN                TimeOut,
+  OUT    UINT32               *TransferResult
+  )
+{
+  DEBUG ((EFI_D_ERROR, "USB: OhciBulkTransfer\n"));
+	return EFI_SUCCESS;
+}
+
+
+/**
+
+  Submits an interrupt transfer to an interrupt endpoint of a USB device.
+
+  @param  Ohc                   Device private data
+  @param  DeviceAddress         Represents the address of the target device on the USB,
+                                which is assigned during USB enumeration.
+  @param  EndPointAddress       The combination of an endpoint number and an endpoint
+                                direction of the target USB device. Each endpoint address
+                                supports data transfer in one direction except the
+                                control endpoint (whose default endpoint address is 0).
+                                It is the caller's responsibility to make sure that
+                                the EndPointAddress represents an interrupt endpoint.
+  @param  IsSlowDevice          Indicates whether the target device is slow device
+                                or full-speed device.
+  @param  MaxPacketLength       Indicates the maximum packet size the target endpoint
+                                is capable of sending or receiving.
+  @param  IsNewTransfer         If TRUE, an asynchronous interrupt pipe is built between
+                                the host and the target interrupt endpoint.
+                                If FALSE, the specified asynchronous interrupt pipe
+                                is canceled.
+  @param  DataToggle            A pointer to the data toggle value.  On input, it is valid
+                                when IsNewTransfer is TRUE, and it indicates the initial
+                                data toggle value the asynchronous interrupt transfer
+                                should adopt.
+                                On output, it is valid when IsNewTransfer is FALSE,
+                                and it is updated to indicate the data toggle value of
+                                the subsequent asynchronous interrupt transfer.
+  @param  PollingInterval       Indicates the interval, in milliseconds, that the
+                                asynchronous interrupt transfer is polled.
+                                This parameter is required when IsNewTransfer is TRUE.
+  @param  UCBuffer              Uncacheable buffer
+  @param  DataLength            Indicates the length of data to be received at the
+                                rate specified by PollingInterval from the target
+                                asynchronous interrupt endpoint.  This parameter
+                                is only required when IsNewTransfer is TRUE.
+  @param  CallBackFunction      The Callback function.This function is called at the
+                                rate specified by PollingInterval.This parameter is
+                                only required when IsNewTransfer is TRUE.
+  @param  Context               The context that is passed to the CallBackFunction.
+                                This is an optional parameter and may be NULL.
+  @param  IsPeriodic            Periodic interrupt or not
+  @param  OutputED              The correspoding ED carried out
+  @param  OutputTD              The correspoding TD carried out
+
+
+  @retval EFI_SUCCESS           The asynchronous interrupt transfer request has been successfully
+                                submitted or canceled.
+  @retval EFI_INVALID_PARAMETER Some parameters are invalid.
+  @retval EFI_OUT_OF_RESOURCES  The request could not be completed due to a lack of resources.
+
+**/
+
+EFI_STATUS
+OhciInterruptTransfer (
+  IN     USB_OHCI_HC_DEV                  *Ohc,
+  IN     UINT8                            DeviceAddress,
+  IN     UINT8                            EndPointAddress,
+  IN     BOOLEAN                          IsSlowDevice,
+  IN     UINT8                            MaxPacketLength,
+  IN     BOOLEAN                          IsNewTransfer,
+  IN OUT UINT8                            *DataToggle        OPTIONAL,
+  IN     UINTN                            PollingInterval    OPTIONAL,
+  IN     VOID                             *UCBuffer          OPTIONAL,
+  IN     UINTN                            DataLength         OPTIONAL,
+  IN     EFI_ASYNC_USB_TRANSFER_CALLBACK  CallBackFunction   OPTIONAL,
+  IN     VOID                             *Context           OPTIONAL,
+  IN     BOOLEAN                          IsPeriodic         OPTIONAL,
+  OUT    VOID                             **OutputED         OPTIONAL,
+  OUT    VOID                             **OutputTD         OPTIONAL
+  )
+{
+  DEBUG ((EFI_D_ERROR, "USB: OhciInterruptTransfer\n"));
+	return EFI_SUCCESS;
+}
+
+/**
+
+  Submits an asynchronous interrupt transfer to an interrupt endpoint of a USB device.
+
+  @param  This                  A pointer to the EFI_USB_HC_PROTOCOL instance.
+  @param  DeviceAddress         Represents the address of the target device on the USB,
+                                which is assigned during USB enumeration.
+  @param  EndPointAddress       The combination of an endpoint number and an endpoint
+                                direction of the target USB device. Each endpoint address
+                                supports data transfer in one direction except the
+                                control endpoint (whose default endpoint address is 0).
+                                It is the caller's responsibility to make sure that
+                                the EndPointAddress represents an interrupt endpoint.
+  @param  IsSlowDevice          Indicates whether the target device is slow device
+                                or full-speed device.
+  @param  MaxiumPacketLength    Indicates the maximum packet size the target endpoint
+                                is capable of sending or receiving.
+  @param  IsNewTransfer         If TRUE, an asynchronous interrupt pipe is built between
+                                the host and the target interrupt endpoint.
+                                If FALSE, the specified asynchronous interrupt pipe
+                                is canceled.
+  @param  DataToggle            A pointer to the data toggle value.  On input, it is valid
+                                when IsNewTransfer is TRUE, and it indicates the initial
+                                data toggle value the asynchronous interrupt transfer
+                                should adopt.
+                                On output, it is valid when IsNewTransfer is FALSE,
+                                and it is updated to indicate the data toggle value of
+                                the subsequent asynchronous interrupt transfer.
+  @param  PollingInterval       Indicates the interval, in milliseconds, that the
+                                asynchronous interrupt transfer is polled.
+                                This parameter is required when IsNewTransfer is TRUE.
+  @param  DataLength            Indicates the length of data to be received at the
+                                rate specified by PollingInterval from the target
+                                asynchronous interrupt endpoint.  This parameter
+                                is only required when IsNewTransfer is TRUE.
+  @param  CallBackFunction      The Callback function.This function is called at the
+                                rate specified by PollingInterval.This parameter is
+                                only required when IsNewTransfer is TRUE.
+  @param  Context               The context that is passed to the CallBackFunction.
+                                This is an optional parameter and may be NULL.
+
+  @retval EFI_SUCCESS           The asynchronous interrupt transfer request has been successfully
+                                submitted or canceled.
+  @retval EFI_INVALID_PARAMETER Some parameters are invalid.
+  @retval EFI_OUT_OF_RESOURCES  The request could not be completed due to a lack of resources.
+
+**/
+
+
+EFI_STATUS
+EFIAPI
+OhciAsyncInterruptTransfer (
+  IN     EFI_USB_HC_PROTOCOL              *This,
+  IN     UINT8                            DeviceAddress,
+  IN     UINT8                            EndPointAddress,
+  IN     BOOLEAN                          IsSlowDevice,
+  IN     UINT8                            MaxPacketLength,
+  IN     BOOLEAN                          IsNewTransfer,
+  IN OUT UINT8                            *DataToggle        OPTIONAL,
+  IN     UINTN                            PollingInterval    OPTIONAL,
+  IN     UINTN                            DataLength         OPTIONAL,
+  IN     EFI_ASYNC_USB_TRANSFER_CALLBACK  CallBackFunction   OPTIONAL,
+  IN     VOID                             *Context           OPTIONAL
+  )
+{
+  DEBUG ((EFI_D_ERROR, "USB: OhciAsyncInterruptTransfer\n"));
+	return EFI_SUCCESS;
+}
+
+/**
+
+  Submits synchronous interrupt transfer to an interrupt endpoint
+  of a USB device.
+
+  @param  This                  A pointer to the EFI_USB_HC_PROTOCOL instance.
+  @param  DeviceAddress         Represents the address of the target device on the USB,
+                                which is assigned during USB enumeration.
+  @param  EndPointAddress       The combination of an endpoint number and an endpoint
+                                direction of the target USB device. Each endpoint
+                                address supports data transfer in one direction
+                                except the control endpoint (whose default
+                                endpoint address is 0). It is the caller's responsibility
+                                to make sure that the EndPointAddress represents
+                                an interrupt endpoint.
+  @param  IsSlowDevice          Indicates whether the target device is slow device
+                                or full-speed device.
+  @param  MaxPacketLength       Indicates the maximum packet size the target endpoint
+                                is capable of sending or receiving.
+  @param  Data                  A pointer to the buffer of data that will be transmitted
+                                to USB device or received from USB device.
+  @param  DataLength            On input, the size, in bytes, of the data buffer specified
+                                by Data. On output, the number of bytes transferred.
+  @param  DataToggle            A pointer to the data toggle value. On input, it indicates
+                                the initial data toggle value the synchronous interrupt
+                                transfer should adopt;
+                                on output, it is updated to indicate the data toggle value
+                                of the subsequent synchronous interrupt transfer.
+  @param  TimeOut               Indicates the maximum time, in microseconds, which the
+                                transfer is allowed to complete.
+  @param  TransferResult        A pointer to the detailed result information from
+                                the synchronous interrupt transfer.
+
+  @retval EFI_UNSUPPORTED       This interface not available.
+  @retval EFI_INVALID_PARAMETER Parameters not follow spec
+
+**/
+
+
+EFI_STATUS
+EFIAPI
+OhciSyncInterruptTransfer (
+  IN     EFI_USB_HC_PROTOCOL  *This,
+  IN     UINT8                DeviceAddress,
+  IN     UINT8                EndPointAddress,
+  IN     BOOLEAN              IsSlowDevice,
+  IN     UINT8                MaxPacketLength,
+  IN OUT VOID                 *Data,
+  IN OUT UINTN                *DataLength,
+  IN OUT UINT8                *DataToggle,
+  IN     UINTN                TimeOut,
+  OUT    UINT32               *TransferResult
+  )
+{
+  DEBUG ((EFI_D_ERROR, "USB: OhciSyncInterruptTransfer\n"));
+	return EFI_SUCCESS;
+}
+
+/**
+
+  Submits isochronous transfer to a target USB device.
+
+  @param  This                  A pointer to the EFI_USB_HC_PROTOCOL instance.
+  @param  DeviceAddress         Represents the address of the target device on the USB,
+                                which is assigned during USB enumeration.
+  @param  EndPointAddress       End point address
+  @param  MaximumPacketLength   Indicates the maximum packet size that the
+                                default control transfer endpoint is capable of
+                                sending or receiving.
+  @param  Data                  A pointer to the buffer of data that will be transmitted
+                                to USB device or received from USB device.
+  @param  DataLength            Indicates the size, in bytes, of the data buffer
+                                specified by Data.
+  @param  TransferResult        A pointer to the detailed result information generated
+                                by this control transfer.
+
+  @retval EFI_UNSUPPORTED       This interface not available
+  @retval EFI_INVALID_PARAMETER Data is NULL or DataLength is 0 or TransferResult is NULL
+
+**/
+
+
+EFI_STATUS
+EFIAPI
+OhciIsochronousTransfer (
+  IN     EFI_USB_HC_PROTOCOL  *This,
+  IN     UINT8                DeviceAddress,
+  IN     UINT8                EndPointAddress,
+  IN     UINT8                MaximumPacketLength,
+  IN OUT VOID                 *Data,
+  IN OUT UINTN                DataLength,
+  OUT    UINT32               *TransferResult
+  )
+{
+  DEBUG ((EFI_D_ERROR, "USB: OhciIsochronousTransfer\n"));
+  if (Data == NULL || DataLength == 0 || TransferResult == NULL) {
+    return EFI_INVALID_PARAMETER;
+  }
+
+  return EFI_UNSUPPORTED;
+}
+
+
+/**
+
+  Submits Async isochronous transfer to a target USB device.
+
+  @param  his                   A pointer to the EFI_USB_HC_PROTOCOL instance.
+  @param  DeviceAddress         Represents the address of the target device on the USB,
+                                which is assigned during USB enumeration.
+  @param  EndPointAddress       End point address
+  @param  MaximumPacketLength   Indicates the maximum packet size that the
+                                default control transfer endpoint is capable of
+                                sending or receiving.
+  @param  Data                  A pointer to the buffer of data that will be transmitted
+                                to USB device or received from USB device.
+  @param  IsochronousCallBack   When the transfer complete, the call back function will be called
+  @param  Context               Pass to the call back function as parameter
+
+  @retval EFI_UNSUPPORTED       This interface not available
+  @retval EFI_INVALID_PARAMETER Data is NULL or Datalength is 0
+
+**/
+
+EFI_STATUS
+EFIAPI
+OhciAsyncIsochronousTransfer (
+  IN     EFI_USB_HC_PROTOCOL                *This,
+  IN     UINT8                              DeviceAddress,
+  IN     UINT8                              EndPointAddress,
+  IN     UINT8                              MaximumPacketLength,
+  IN OUT VOID                               *Data,
+  IN OUT UINTN                              DataLength,
+  IN     EFI_ASYNC_USB_TRANSFER_CALLBACK    IsochronousCallBack,
+  IN     VOID                               *Context OPTIONAL
+  )
+{
+  DEBUG ((EFI_D_ERROR, "USB: OhciAsyncIsochronousTransfer\n"));
+  if (Data == NULL || DataLength == 0) {
+    return EFI_INVALID_PARAMETER;
+  }
+
+  return EFI_UNSUPPORTED;
+}
+
+/**
+
+  Retrieves the number of root hub ports.
+
+  @param  This                  A pointer to the EFI_USB_HC_PROTOCOL instance.
+  @param  NumOfPorts            A pointer to the number of the root hub ports.
+
+  @retval EFI_SUCCESS           The port number was retrieved successfully.
+**/
+EFI_STATUS
+EFIAPI
+OhciGetRootHubNumOfPorts (
+  IN  EFI_USB_HC_PROTOCOL  *This,
+  OUT UINT8                *NumOfPorts
+  )
+{
+  DEBUG ((EFI_D_ERROR, "USB: OhciGetRootHubNumOfPorts\n"));
+  //TODO, so apparently this devices root port can't be probed?
+  // default to one port, and simulate it?
+  *NumOfPorts = 1;
+  return EFI_SUCCESS;
+}
+
+#define MAXPORTS 4;
+
+/**
+
+  Retrieves the current status of a USB root hub port.
+
+  @param  This                  A pointer to the EFI_USB_HC_PROTOCOL.
+  @param  PortNumber            Specifies the root hub port from which the status
+                                is to be retrieved.  This value is zero-based. For example,
+                                if a root hub has two ports, then the first port is numbered 0,
+                                and the second port is numbered 1.
+  @param  PortStatus            A pointer to the current port status bits and
+                                port status change bits.
+
+  @retval EFI_SUCCESS           The status of the USB root hub port specified by PortNumber
+                                was returned in PortStatus.
+  @retval EFI_INVALID_PARAMETER Port number not valid
+**/
+
+
+EFI_STATUS
+EFIAPI
+OhciGetRootHubPortStatus (
+  IN  EFI_USB_HC_PROTOCOL  *This,
+  IN  UINT8                PortNumber,
+  OUT EFI_USB_PORT_STATUS  *PortStatus
+  )
+{
+  USB_OHCI_HC_DEV           *Ehc;
+
+//	DEBUG ((EFI_D_ERROR, "USB: OhciGetRootHubPortStatus %d\n",PortNumber));
+  if (PortStatus == NULL) {
+    return EFI_INVALID_PARAMETER;
+  }
+
+  Ehc = USB_OHCI_HC_DEV_FROM_THIS (This);
+
+	//TODO more faked status?
+	// The HPRT register contains the host status
+	// indicating speed/power etc
+	PortStatus->PortStatus        = 0;
+  PortStatus->PortChangeStatus  = 0;
+	PortStatus->PortStatus       |= USB_PORT_STAT_LOW_SPEED;
+	PortStatus->PortStatus       |= USB_PORT_STAT_ENABLE;
+	PortStatus->PortStatus       |= USB_PORT_STAT_POWER;
+	PortStatus->PortStatus       |= USB_PORT_STAT_CONNECTION;
+
+	// on first status (reset/whatever) describe a new connection
+  if (Ehc->PortStatus) {
+		DEBUG ((EFI_D_ERROR, "USB: OhciGetRootHubPortStatus %d change to connected\n",PortNumber));
+		DEBUG ((EFI_D_ERROR, "USB: OhciGetRootHubPortStatus actual hport status %X\n",READ_REG32(HPRT)));
+		Ehc->PortStatus = 0;
+		PortStatus->PortChangeStatus |= USB_PORT_STAT_CONNECTION;
+	}
+
+  return EFI_SUCCESS;
+}
+
+/**
+
+  Sets a feature for the specified root hub port.
+
+  @param  This                  A pointer to the EFI_USB_HC_PROTOCOL.
+  @param  PortNumber            Specifies the root hub port whose feature
+                                is requested to be set.
+  @param  PortFeature           Indicates the feature selector associated
+                                with the feature set request.
+
+  @retval EFI_SUCCESS           The feature specified by PortFeature was set for the
+                                USB root hub port specified by PortNumber.
+  @retval EFI_DEVICE_ERROR      Set feature failed because of hardware issue
+  @retval EFI_INVALID_PARAMETER PortNumber is invalid or PortFeature is invalid.
+**/
+EFI_STATUS
+EFIAPI
+OhciSetRootHubPortFeature (
+  IN EFI_USB_HC_PROTOCOL   *This,
+  IN UINT8                 PortNumber,
+  IN EFI_USB_PORT_FEATURE  PortFeature
+  )
+{
+	DEBUG ((EFI_D_ERROR, "USB: OhciSetRootHubPortFeature port(%d) -> %d\n",PortNumber,PortFeature));
+  switch (PortFeature)	{
+			case EfiUsbPortReset:
+					DEBUG ((EFI_D_ERROR, "USB: OhciSetRootHubPortFeature reset\n"));
+					break;
+			case EfiUsbPortEnable:
+					DEBUG ((EFI_D_ERROR, "USB: OhciSetRootHubPortFeature enable\n"));
+					break;
+			default:
+					DEBUG ((EFI_D_ERROR, "USB: OhciSetRootHubPortFeature (other)\n"));
+	}
+	return EFI_SUCCESS;
+}
+
+
+/**
+
+  Clears a feature for the specified root hub port.
+
+  @param  This                  A pointer to the EFI_USB_HC_PROTOCOL instance.
+  @param  PortNumber            Specifies the root hub port whose feature
+                                is requested to be cleared.
+  @param  PortFeature           Indicates the feature selector associated with the
+                                feature clear request.
+
+  @retval EFI_SUCCESS           The feature specified by PortFeature was cleared for the
+                                USB root hub port specified by PortNumber.
+  @retval EFI_INVALID_PARAMETER PortNumber is invalid or PortFeature is invalid.
+  @retval EFI_DEVICE_ERROR      Some error happened when clearing feature
+**/
+EFI_STATUS
+EFIAPI
+OhciClearRootHubPortFeature (
+  IN EFI_USB_HC_PROTOCOL   *This,
+  IN UINT8                 PortNumber,
+  IN EFI_USB_PORT_FEATURE  PortFeature
+  )
+{
+	DEBUG ((EFI_D_ERROR, "USB: OhciClearRootHubPortFeature port(%d) -> %d\n",PortNumber,PortFeature));
+	return EFI_SUCCESS;
+}
+
+USB_OHCI_HC_DEV *
+OhciAllocateDev (
+  IN EFI_PCI_IO_PROTOCOL  *PciIo
+  )
+{
+  USB_OHCI_HC_DEV         *Ohc;
+//  EFI_STATUS              Status;
+//  VOID                    *Buf;
+//  EFI_PHYSICAL_ADDRESS    PhyAddr;
+//  VOID                    *Map;
+  UINTN                   Pages;
+  UINTN                   Bytes;
+
+  Ohc = AllocateZeroPool (sizeof (USB_OHCI_HC_DEV));
+  if (Ohc == NULL) {
+    return NULL;
+  }
+
+  Ohc->Signature                      = USB_DW_HC_DEV_SIGNATURE;
+  Ohc->PciIo                          = PciIo;
+
+  Ohc->UsbHc.Reset                    = OhciReset;
+  Ohc->UsbHc.GetState                 = OhciGetState;
+  Ohc->UsbHc.SetState                 = OhciSetState;
+  Ohc->UsbHc.ControlTransfer          = OhciControlTransfer;
+  Ohc->UsbHc.BulkTransfer             = OhciBulkTransfer;
+  Ohc->UsbHc.AsyncInterruptTransfer   = OhciAsyncInterruptTransfer;
+  Ohc->UsbHc.SyncInterruptTransfer    = OhciSyncInterruptTransfer;
+  Ohc->UsbHc.IsochronousTransfer      = OhciIsochronousTransfer;
+  Ohc->UsbHc.AsyncIsochronousTransfer = OhciAsyncIsochronousTransfer;
+  Ohc->UsbHc.GetRootHubPortNumber     = OhciGetRootHubNumOfPorts;
+  Ohc->UsbHc.GetRootHubPortStatus     = OhciGetRootHubPortStatus;
+  Ohc->UsbHc.SetRootHubPortFeature    = OhciSetRootHubPortFeature;
+  Ohc->UsbHc.ClearRootHubPortFeature  = OhciClearRootHubPortFeature;
+  Ohc->UsbHc.MajorRevision            = 0x1;
+  Ohc->UsbHc.MinorRevision            = 0x1;
+
+//  Ohc->HccaMemoryBlock = NULL;
+  Ohc->HccaMemoryMapping   = NULL;
+  Ohc->HccaMemoryBuf = NULL;
+  Ohc->HccaMemoryPages = 0;
+//  Ohc->InterruptContextList = NULL;
+  Ohc->ControllerNameTable = NULL;
+  Ohc->HouseKeeperTimer = NULL;
+
+/*  Ohc->MemPool = UsbHcInitMemPool(PciIo, TRUE, 0);
+  if(Ohc->MemPool == NULL) {
+    goto FREE_DEV_BUFFER;
+	}*/
+
+  Bytes = 4096;
+  Pages = EFI_SIZE_TO_PAGES (Bytes);
+
+/*  Status = PciIo->AllocateBuffer (
+                    PciIo,
+                    AllocateAnyPages,
+                    EfiBootServicesData,
+                    Pages,
+                    &Buf,
+                    0
+                    );
+
+  if (EFI_ERROR (Status)) {
+    goto FREE_MEM_POOL;
+  }
+
+  Status = PciIo->Map (
+                    PciIo,
+                    EfiPciIoOperationBusMasterCommonBuffer,
+                    Buf,
+                    &Bytes,
+                    &PhyAddr,
+                    &Map
+                    );
+
+  if (EFI_ERROR (Status) || (Bytes != 4096)) {
+    goto FREE_MEM_PAGE;
+  }*/
+
+//  Ohc->HccaMemoryBlock = (HCCA_MEMORY_BLOCK *)(UINTN)PhyAddr;
+//  Ohc->HccaMemoryMapping = Map;
+//  Ohc->HccaMemoryBuf = (VOID *)(UINTN)Buf;
+  Ohc->HccaMemoryPages = Pages;
+  Ohc->PortStatus = 1;
+
+  return Ohc;
+
+//FREE_MEM_PAGE:
+//  PciIo->FreeBuffer (PciIo, Pages, Buf);
+//FREE_MEM_POOL:
+//  UsbHcFreeMemPool (Ohc->MemPool);
+//FREE_DEV_BUFFER:
+//  FreePool(Ohc);
+
+  return NULL;
+}
+
+/**
+
+  One notified function to stop the Host Controller when gBS->ExitBootServices() called.
+
+  @param  Event                 Pointer to this event
+  @param  Context               Event handler private data
+**/
+VOID
+EFIAPI
+DwHcExitBootService (
+  EFI_EVENT                      Event,
+  VOID                           *Context
+  )
+{
+  DEBUG ((EFI_D_ERROR, "DwUsbExitBootService!\n"));
+}
+
+
+#pragma pack(1)
+typedef struct {
+  UINT8               ProgInterface;
+  UINT8               SubClassCode;
+  UINT8               BaseCode;
+} USB_CLASSC;
+#pragma pack()
+//typedef struct _USB2_HC_DEV  USB2_HC_DEV;
+
+/**
+  Test to see if this driver supports ControllerHandle. Any
+  ControllerHandle that has Usb2HcProtocol installed will
+  be supported.
+
+  @param  This                 Protocol instance pointer.
+  @param  Controller           Handle of device to test.
+  @param  RemainingDevicePath  Not used.
+
+  @return EFI_SUCCESS          This driver supports this device.
+  @return EFI_UNSUPPORTED      This driver does not support this device.
+
+**/
+EFI_STATUS
+EFIAPI
+DwUsbDriverBindingSupported (
+  IN EFI_DRIVER_BINDING_PROTOCOL *This,
+  IN EFI_HANDLE                  Controller,
+  IN EFI_DEVICE_PATH_PROTOCOL    *RemainingDevicePath
+  )
+{
+  EFI_STATUS              Status;
+  EFI_PCI_IO_PROTOCOL     *PciIo;
+  USB_CLASSC              UsbClassCReg;
+
+//  DEBUG ((EFI_D_ERROR, "DwUsbDriverBindingSupported\n"));
+  //
+  // Test whether there is PCI IO Protocol attached on the controller handle.
+  //
+  Status = gBS->OpenProtocol (
+                  Controller,
+                  &gEfiPciIoProtocolGuid,
+                  (VOID **) &PciIo,
+                  This->DriverBindingHandle,
+                  Controller,
+                  EFI_OPEN_PROTOCOL_BY_DRIVER
+                  );
+
+  if (EFI_ERROR (Status)) {
+    return EFI_UNSUPPORTED;
+  }
+
+  Status = PciIo->Pci.Read (
+                        PciIo,
+                        EfiPciIoWidthUint8,
+                        PCI_CLASSCODE_OFFSET,
+                        sizeof (USB_CLASSC) / sizeof (UINT8),
+                        &UsbClassCReg
+                        );
+
+  if (EFI_ERROR (Status)) {
+    Status = EFI_UNSUPPORTED;
+    goto ON_EXIT;
+  }
+
+  //
+  // Test whether the controller belongs to Usb class type
+  //
+  if ((UsbClassCReg.BaseCode != PCI_CLASS_SERIAL) || (UsbClassCReg.SubClassCode != PCI_CLASS_SERIAL_USB)) {
+    Status = EFI_UNSUPPORTED;
+  }
+  else  {
+	  DEBUG ((EFI_D_ERROR, "DwUsbDriverBindingSupported found board!\n"));
+  }
+
+ON_EXIT:
+  gBS->CloseProtocol (
+         Controller,
+         &gEfiPciIoProtocolGuid,
+         This->DriverBindingHandle,
+         Controller
+         );
+
+  return Status;
+}
+
+/**
+  Starting the Usb EHCI Driver.
+
+  @param  This                 Protocol instance pointer.
+  @param  Controller           Handle of device to test.
+  @param  RemainingDevicePath  Not used.
+
+  @return EFI_SUCCESS          supports this device.
+  @return EFI_UNSUPPORTED      do not support this device.
+  @return EFI_DEVICE_ERROR     cannot be started due to device Error.
+  @return EFI_OUT_OF_RESOURCES cannot allocate resources.
+
+**/
+EFI_STATUS
+EFIAPI
+DwUsbDriverBindingStart (
+  IN EFI_DRIVER_BINDING_PROTOCOL *This,
+  IN EFI_HANDLE                  Controller,
+  IN EFI_DEVICE_PATH_PROTOCOL    *RemainingDevicePath
+  )
+{
+  EFI_STATUS                Status;
+//  USB2_HC_DEV               *Ehc;
+  USB_OHCI_HC_DEV           *Ehc;
+  EFI_PCI_IO_PROTOCOL       *PciIo;
+  EFI_DEVICE_PATH_PROTOCOL  *HcDevicePath;
+
+  DEBUG ((EFI_D_ERROR, "DwUsbDriverBindingStart \n"));
+  //
+  // Open the PciIo Protocol, then enable the USB host controller
+  //
+  Status = gBS->OpenProtocol (
+                  Controller,
+                  &gEfiPciIoProtocolGuid,
+                  (VOID **) &PciIo,
+                  This->DriverBindingHandle,
+                  Controller,
+                  EFI_OPEN_PROTOCOL_BY_DRIVER
+                  );
+
+  if (EFI_ERROR (Status)) {
+    return Status;
+  }
+  DEBUG ((EFI_D_ERROR, "DwUsbDriverBindingStart2 \n"));
+  //
+  // Open Device Path Protocol for on USB host controller
+  //
+  HcDevicePath = NULL;
+  Status = gBS->OpenProtocol (
+                  Controller,
+                  &gEfiDevicePathProtocolGuid,
+                  (VOID **) &HcDevicePath,
+                  This->DriverBindingHandle,
+                  Controller,
+                  EFI_OPEN_PROTOCOL_GET_PROTOCOL
+                  );
+  DEBUG ((EFI_D_ERROR, "DwUsbDriverBindingStart3 \n"));
+  //
+  // Create then install USB2_HC_PROTOCOL
+  //
+//  Ehc = EhcCreateUsb2Hc (PciIo, HcDevicePath, OriginalPciAttributes);
+//  Ehc = EhcCreateUsb2Hc (PciIo, HcDevicePath, 0);
+  Ehc = OhciAllocateDev(PciIo);
+  DEBUG ((EFI_D_ERROR, "DwUsbDriverBindingStart4 \n"));
+  if (Ehc == NULL) {
+    DEBUG ((EFI_D_ERROR, "EhcDriverBindingStart: failed to create USB2_HC\n"));
+
+    Status = EFI_OUT_OF_RESOURCES;
+    goto CLOSE_PCIIO;
+  }
+  Status = gBS->InstallProtocolInterface (
+                  &Controller,
+//                  &gEfiUsb2HcProtocolGuid,
+                  &gEfiUsbHcProtocolGuid,
+                  EFI_NATIVE_INTERFACE,
+                  &Ehc->UsbHc
+                  );
+  DEBUG ((EFI_D_ERROR, "DwUsbDriverBindingStart5 \n"));
+  if (EFI_ERROR (Status)) {
+    DEBUG ((EFI_D_ERROR, "EhcDriverBindingStart: failed to install USB2_HC Protocol\n"));
+    goto FREE_POOL;
+  }
+  //
+  // Start the asynchronous interrupt monitor
+  //
+/*  Status = gBS->SetTimer (Ehc->PollTimer, TimerPeriodic, EHC_ASYNC_POLL_INTERVAL);
+
+  if (EFI_ERROR (Status)) {
+    DEBUG ((EFI_D_ERROR, "EhcDriverBindingStart: failed to start async interrupt monitor\n"));
+
+    EhcHaltHC (Ehc, EHC_GENERIC_TIMEOUT);
+    goto UNINSTALL_USBHC;
+  }
+*/
+  //
+  // Create event to stop the HC when exit boot service.
+  //
+  Status = gBS->CreateEventEx (
+                  EVT_NOTIFY_SIGNAL,
+                  TPL_NOTIFY,
+                  DwHcExitBootService,
+                  Ehc,
+                  &gEfiEventExitBootServicesGuid,
+                  &Ehc->ExitBootServiceEvent
+                  );
+  if (EFI_ERROR (Status)) {
+    goto UNINSTALL_USBHC;
+  }
+
+  //
+  // Install the component name protocol, don't fail the start
+  // because of something for display.
+  //
+  DEBUG ((EFI_D_ERROR, "DwUsbDriverBindingStart6 \n"));
+  AddUnicodeString2 (
+    "eng",
+    gOhciComponentName.SupportedLanguages,
+    &Ehc->ControllerNameTable,
+    L"Designware Host Controller (USB 2.0)",
+    TRUE
+    );
+  AddUnicodeString2 (
+    "en",
+    gOhciComponentName2.SupportedLanguages,
+    &Ehc->ControllerNameTable,
+    L"Designware Host Controller (USB 2.0)",
+    FALSE
+    );
+  DEBUG ((EFI_D_ERROR, "DwUsbDriverBindingStart7 \n"));
+  phy_init(Ehc); //TODO these need the pci protocol so they talk to the right device...
+  DEBUG ((EFI_D_ERROR, "DwUsbDriverBindingStart8 \n"));
+	DwHostInit(Ehc); 
+
+UNINSTALL_USBHC:
+CLOSE_PCIIO:
+FREE_POOL:
+
+  DEBUG ((EFI_D_INFO, "EhcDriverBindingStart: EHCI started for controller @ %p\n", Controller));
+  DEBUG ((EFI_D_ERROR, "DwUsbDriverBindingStart9 \n"));
+  return EFI_SUCCESS;
+
+}
+
+/**
+  Stop this driver on ControllerHandle. Support stopping any child handles
+  created by this driver.
+
+  @param  This                 Protocol instance pointer.
+  @param  Controller           Handle of device to stop driver on.
+  @param  NumberOfChildren     Number of Children in the ChildHandleBuffer.
+  @param  ChildHandleBuffer    List of handles for the children we need to stop.
+
+  @return EFI_SUCCESS          Success.
+  @return EFI_DEVICE_ERROR     Fail.
+
+**/
+EFI_STATUS
+EFIAPI
+DwUsbDriverBindingStop (
+  IN EFI_DRIVER_BINDING_PROTOCOL *This,
+  IN EFI_HANDLE                  Controller,
+  IN UINTN                       NumberOfChildren,
+  IN EFI_HANDLE                  *ChildHandleBuffer
+  )
+{
+  EFI_STATUS            Status;
+  EFI_USB2_HC_PROTOCOL  *Usb2Hc;
+//  EFI_PCI_IO_PROTOCOL   *PciIo;
+  USB_OHCI_HC_DEV       *Ehc;
+
+  DEBUG ((EFI_D_ERROR, "DwUsbDriverBindingStop \n"));
+  //
+  // Test whether the Controller handler passed in is a valid
+  // Usb controller handle that should be supported, if not,
+  // return the error status directly
+  //
+  Status = gBS->OpenProtocol (
+                  Controller,
+//                  &gEfiUsb2HcProtocolGuid,
+                  &gEfiUsbHcProtocolGuid,
+                  (VOID **) &Usb2Hc,
+                  This->DriverBindingHandle,
+                  Controller,
+                  EFI_OPEN_PROTOCOL_GET_PROTOCOL
+                  );
+
+  if (EFI_ERROR (Status)) {
+    return Status;
+  }
+
+//  Ehc   = EHC_FROM_THIS (Usb2Hc);
+  Ehc = USB_OHCI_HC_DEV_FROM_THIS (This);
+//  PciIo = Ehc->PciIo;
+
+  Status = gBS->UninstallProtocolInterface (
+                  Controller,
+//                  &gEfiUsb2HcProtocolGuid,
+                  &gEfiUsbHcProtocolGuid,
+                  Usb2Hc
+                  );
+
+  if (EFI_ERROR (Status)) {
+    return Status;
+  }
+
+  //
+  // Stop AsyncRequest Polling timer then stop the EHCI driver
+  // and uninstall the EHCI protocl.
+  //
+/*  gBS->SetTimer (Ehc->PollTimer, TimerCancel, EHC_ASYNC_POLL_INTERVAL);
+  EhcHaltHC (Ehc, EHC_GENERIC_TIMEOUT);
+
+  if (Ehc->PollTimer != NULL) {
+    gBS->CloseEvent (Ehc->PollTimer);
+  }
+*/
+  if (Ehc->ExitBootServiceEvent != NULL) {
+    gBS->CloseEvent (Ehc->ExitBootServiceEvent);
+  }
+/*
+  EhcFreeSched (Ehc);
+
+  if (Ehc->ControllerNameTable != NULL) {
+    FreeUnicodeStringTable (Ehc->ControllerNameTable);
+  }
+*/
+  //
+  // Disable routing of all ports to EHCI controller, so all ports are 
+  // routed back to the UHCI or OHCI controller.
+  //
+  /*EhcClearOpRegBit (Ehc, EHC_CONFIG_FLAG_OFFSET, CONFIGFLAG_ROUTE_EHC);
+
+  //
+  // Restore original PCI attributes
+  //
+  PciIo->Attributes (
+                  PciIo,
+                  EfiPciIoAttributeOperationSet,
+                  Ehc->OriginalPciAttributes,
+                  NULL
+                  );
+  */
+  gBS->CloseProtocol (
+         Controller,
+         &gEfiPciIoProtocolGuid,
+         This->DriverBindingHandle,
+         Controller
+         );
+
+  FreePool (Ehc);
+
+  return EFI_SUCCESS;
+}
+
+
+
+EFI_DRIVER_BINDING_PROTOCOL
+gOhciDriverBinding = {
+  DwUsbDriverBindingSupported,
+  DwUsbDriverBindingStart,
+  DwUsbDriverBindingStop,
+  0x30,
+  NULL,
+  NULL
+};
+
+EFI_STATUS
+EFIAPI
+DwUsbEntryPoint (
+  IN EFI_HANDLE                            ImageHandle,
+  IN EFI_SYSTEM_TABLE                      *SystemTable
+  )
+{
+  DEBUG ((EFI_D_ERROR, "DwUsbEntryPoint \n"));
+  return EfiLibInstallDriverBindingComponentName2 (
+           ImageHandle,
+           SystemTable,
+           &gOhciDriverBinding,
+           ImageHandle,
+           &gOhciComponentName,
+           &gOhciComponentName2
+           );
+}
diff --git a/Silicon/Synopsys/Usb/DwUsbDxe/DwUsbDxe.dec b/Silicon/Synopsys/Usb/DwUsbDxe/DwUsbDxe.dec
new file mode 100644
index 000000000..860da80bd
--- /dev/null
+++ b/Silicon/Synopsys/Usb/DwUsbDxe/DwUsbDxe.dec
@@ -0,0 +1,42 @@
+#/** @file
+# Framework Module Development Environment Industry Standards
+#
+# This Package provides headers and libraries that conform to EFI/PI Industry standards.
+# Copyright (c) 2007, Intel Corporation. All rights reserved.<BR>
+# Copyright (c) 2012-2014, ARM Ltd. All rights reserved.<BR>
+# Copyright (c) 2015-2017, Linaro. All rights reserved.<BR>
+#
+#    This program and the accompanying materials are licensed and made available under
+#    the terms and conditions of the BSD License which accompanies this distribution.
+#    The full text of the license may be found at
+#    http://opensource.org/licenses/bsd-license.php
+#
+#    THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+#    WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+#
+#**/
+
+[Defines]
+  DEC_SPECIFICATION              = 0x00010019
+  PACKAGE_NAME                   = DwUsbDxePkg
+  PACKAGE_GUID                   = 6c9afc9afb83-e3cd-4453-9b3f-78ffba3e67af
+  PACKAGE_VERSION                = 0.1
+
+
+################################################################################
+#
+# Include Section - list of Include Paths that are provided by this package.
+#                   Comments are used for Keywords and Module Types.
+#
+# Supported Module Types:
+#  BASE SEC PEI_CORE PEIM DXE_CORE DXE_DRIVER DXE_RUNTIME_DRIVER DXE_SMM_DRIVER DXE_SAL_DRIVER UEFI_DRIVER UEFI_APPLICATION
+#
+################################################################################
+
+[Guids.common]
+  gDwUsbDxeTokenSpaceGuid       = { 0x6fdd76a9, 0xf220, 0x4f1d,  { 0x9c, 0xcf, 0xbc, 0x2d, 0x68, 0x29, 0xab, 0x9d }}
+
+[PcdsFixedAtBuild.common]
+  # DwEmmc Driver PCDs
+  gDwUsbDxeTokenSpaceGuid.PcdDwUsbBaseAddress|0x0|UINT32|0x00000001
+  gDwUsbDxeTokenSpaceGuid.PcdDwUsbSysCtrlBaseAddress|0x0|UINT32|0x0000002
diff --git a/Silicon/Synopsys/Usb/DwUsbDxe/DwUsbDxe.h b/Silicon/Synopsys/Usb/DwUsbDxe/DwUsbDxe.h
new file mode 100644
index 000000000..95ee0a5ee
--- /dev/null
+++ b/Silicon/Synopsys/Usb/DwUsbDxe/DwUsbDxe.h
@@ -0,0 +1,534 @@
+/** @file
+
+  Copyright (c) 2015, Linaro Limited. All rights reserved.
+  Copyright (c) 2015, Hisilicon Limited. All rights reserved.
+  Copyright (c) 2017, Jeremy Linton. All rights reserved.
+
+  This program and the accompanying materials
+  are licensed and made available under the terms and conditions of the BSD License
+  which accompanies this distribution.  The full text of the license may be found at
+  http://opensource.org/licenses/bsd-license.php
+
+  THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+  WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+#ifndef __DW_USB_DXE_H__
+#define __DW_USB_DXE_H__
+
+#define DW_USB_BASE FixedPcdGet32 (PcdDwUsbBaseAddress)
+#define USB_PHY_BASE FixedPcdGet32 (PcdDwUsbSysCtrlBaseAddress)
+
+// This stuff is a verbatim copy of the linux phy-hi6220-usb.c driver
+// Its also in the linaro hikey edk2 git tree.
+// No real explanation of what these do beyond that file.
+/*#define SC_PERIPH_CTRL4			0x00c
+
+#define CTRL4_PICO_SIDDQ		BIT6
+#define CTRL4_PICO_OGDISABLE		BIT8
+#define CTRL4_PICO_VBUSVLDEXT		BIT10
+#define CTRL4_PICO_VBUSVLDEXTSEL	BIT11
+#define CTRL4_OTG_PHY_SEL		BIT21
+
+#define SC_PERIPH_CTRL5			0x010
+
+#define CTRL5_USBOTG_RES_SEL		BIT3
+#define CTRL5_PICOPHY_ACAENB		BIT4
+#define CTRL5_PICOPHY_BC_MODE		BIT5
+#define CTRL5_PICOPHY_CHRGSEL		BIT6
+#define CTRL5_PICOPHY_VDATSRCEND	BIT7
+#define CTRL5_PICOPHY_VDATDETENB	BIT8
+#define CTRL5_PICOPHY_DCDENB		BIT9
+#define CTRL5_PICOPHY_IDDIG		BIT10
+
+#define SC_PERIPH_CTRL8			0x018
+#define SC_PERIPH_RSTEN0		0x300
+#define SC_PERIPH_RSTDIS0		0x304
+
+#define RST0_USBOTG_BUS			BIT4
+#define RST0_POR_PICOPHY		BIT5
+#define RST0_USBOTG			BIT6
+#define RST0_USBOTG_32K			BIT7
+
+#define EYE_PATTERN_PARA		0x7053348c*/
+
+// GPIO pins to enable hub and turn on host mode
+#define GPIODATA_3              0x0020
+#define GPIODATA_7              0x0200
+#define GPIODIR                 0x0400
+#define GPIOAFSEL               0x0420
+
+#define USB_SEL_GPIO0_3          3     // GPIO 0_3
+#define USB_5V_HUB_EN            7     // GPIO 0_7
+#define USB_ID_DET_GPIO2_5       21    // GPIO 2_5
+#define USB_VBUS_DET_GPIO2_6     22    // GPIO 2_6
+ 
+
+#define PHY_READ_REG32(Offset) MmioRead32 (USB_PHY_BASE + Offset)
+#define PHY_WRITE_REG32(Offset, Val)  MmioWrite32 (USB_PHY_BASE + Offset, Val)
+#define GPIO_READ_REG32(Offset) MmioRead32(0xf8011000+Offset)
+#define GPIO_WRITE_REG32(Offset, Val) MmioWrite32(0xf8011000+Offset,Val)
+
+#define READ_REG64(Offset) MmioRead64 (DW_USB_BASE + Offset)
+#define READ_REG32(Offset) MmioRead32 (DW_USB_BASE + Offset)
+#define READ_REG16(Offset) (UINT16) READ_REG32 (Offset)
+#define WRITE_REG64(Offset, Val)  MmioWrite64 (DW_USB_BASE + Offset, Val)
+#define WRITE_REG32(Offset, Val)  MmioWrite32 (DW_USB_BASE + Offset, Val)
+#define WRITE_REG16(Offset, Val)  MmioWrite32 (DW_USB_BASE + Offset, (UINT32) Val)
+#define WRITE_REG8(Offset, Val)   MmioWrite32 (DW_USB_BASE + Offset, (UINT32) Val)
+
+// Max packet size in bytes (For Full Speed USB 64 is the only valid value)
+#define MAX_PACKET_SIZE_CONTROL     64
+
+#define MAX_PACKET_SIZE_BULK        512
+
+// 8 Endpoints, in and out. Don't count the Endpoint 0 setup buffer
+#define DW_NUM_ENDPOINTS               16
+
+// Endpoint Indexes
+#define DW_EP0SETUP                    0x20
+#define DW_EP0RX                       0x00
+#define DW_EP0TX                       0x01
+#define DW_EP1RX                       0x02
+#define DW_EP1TX                       0x03
+
+// DcInterrupt bits
+#define DW_DC_INTERRUPT_BRESET         BIT0
+#define DW_DC_INTERRUPT_SOF            BIT1
+#define DW_DC_INTERRUPT_PSOF           BIT2
+#define DW_DC_INTERRUPT_SUSP           BIT3
+#define DW_DC_INTERRUPT_RESUME         BIT4
+#define DW_DC_INTERRUPT_HS_STAT        BIT5
+#define DW_DC_INTERRUPT_DMA            BIT6
+#define DW_DC_INTERRUPT_VBUS           BIT7
+#define DW_DC_INTERRUPT_EP0SETUP       BIT8
+#define DW_DC_INTERRUPT_EP0RX          BIT10
+#define DW_DC_INTERRUPT_EP0TX          BIT11
+#define DW_DC_INTERRUPT_EP1RX          BIT12
+#define DW_DC_INTERRUPT_EP1TX          BIT13
+// All valid peripheral controller interrupts
+#define DW_DC_INTERRUPT_MASK           0x003FFFDFF
+
+#define DW_ADDRESS                     0x200
+#define DW_ADDRESS_DEVEN               BIT7
+
+#define DW_MODE                        0x20C
+#define DW_MODE_DATA_BUS_WIDTH         BIT8
+#define DW_MODE_CLKAON                 BIT7
+#define DW_MODE_SFRESET                BIT4
+#define DW_MODE_WKUPCS                 BIT2
+
+#define DW_ENDPOINT_MAX_PACKET_SIZE    0x204
+
+#define DW_ENDPOINT_TYPE               0x208
+#define DW_ENDPOINT_TYPE_NOEMPKT       BIT4
+#define DW_ENDPOINT_TYPE_ENABLE        BIT3
+
+#define DW_INTERRUPT_CONFIG            0x210
+// Interrupt config value to only interrupt on ACK of IN and OUT tokens
+#define DW_INTERRUPT_CONFIG_ACK_ONLY   BIT2 | BIT5 | BIT6
+
+#define DW_DC_INTERRUPT                0x218
+#define DW_DC_INTERRUPT_ENABLE         0x214
+
+#define DW_CTRL_FUNCTION               0x228
+#define DW_CTRL_FUNCTION_VENDP         BIT3
+#define DW_CTRL_FUNCTION_DSEN          BIT2
+#define DW_CTRL_FUNCTION_STATUS        BIT1
+
+#define DW_DEVICE_UNLOCK               0x27C
+#define DW_DEVICE_UNLOCK_MAGIC         0xAA37
+
+#define DW_SW_RESET_REG                0x30C
+#define DW_SW_RESET_ALL                BIT0
+
+#define DW_DEVICE_ID                   0x370
+
+#define DW_OTG_CTRL_SET                0x374
+#define DW_OTG_CTRL_CLR                OTG_CTRL_SET + 2
+#define DW_OTG_CTRL_OTG_DISABLE        BIT10
+#define DW_OTG_CTRL_VBUS_CHRG          BIT6
+#define DW_OTG_CTRL_VBUS_DISCHRG       BIT5
+#define DW_OTG_CTRL_DM_PULLDOWN        BIT2
+#define DW_OTG_CTRL_DP_PULLDOWN        BIT1
+#define DW_OTG_CTRL_DP_PULLUP          BIT0
+
+#define DW_OTG_STATUS                  0x378
+#define DW_OTG_STATUS_B_SESS_END       BIT7
+#define DW_OTG_STATUS_A_B_SESS_VLD     BIT1
+
+#define DW_OTG_INTERRUPT_LATCH_SET     0x37C
+#define DW_OTG_INTERRUPT_LATCH_CLR     0x37E
+#define DW_OTG_INTERRUPT_ENABLE_RISE   0x384
+
+#define DW_DMA_ENDPOINT_INDEX          0x258
+
+#define DW_ENDPOINT_INDEX              0x22c
+#define DW_DATA_PORT                   0x220
+#define DW_BUFFER_LENGTH               0x21c
+
+// Device ID Values
+#define PHILLIPS_VENDOR_ID_VAL 0x04cc
+#define DW_PRODUCT_ID_VAL 0x1761
+#define DW_DEVICE_ID_VAL ((ISP1761_PRODUCT_ID_VAL << 16) |\
+                               PHILLIPS_VENDOR_ID_VAL)
+
+#define DWC_OTG_BASE		       DW_USB_BASE
+
+#define USB_NUM_ENDPOINTS          2
+#define MAX_EPS_CHANNELS 		   16
+
+#define BULK_OUT_EP 			   1
+#define BULK_IN_EP				   1
+
+#define RX_REQ_LEN 				   512
+#define MAX_PACKET_LEN 			   512
+
+#define DATA_FIFO_CONFIG 		   0x0F801000
+/* RX FIFO: 2048 bytes */
+#define RX_SIZE          		   0x00000200
+/* Non-periodic TX FIFO: 128 bytes. start address: 0x200 * 4. */
+#define ENDPOINT_TX_SIZE 		   0x01000200
+
+/* EP1  TX FIFO: 1024 bytes. start address: 0x300 * 4. */
+/* EP2  TX FIFO: 1024 bytes. start address: 0x400 * 4. */
+/* EP3  TX FIFO: 1024 bytes. start address: 0x500 * 4. */
+/* EP4  TX FIFO: 1024 bytes. start address: 0x600 * 4. */
+/* EP5  TX FIFO: 1024 bytes. start address: 0x700 * 4. */
+/* EP6  TX FIFO: 1024 bytes. start address: 0x800 * 4. */
+/* EP7  TX FIFO: 1024 bytes. start address: 0x900 * 4. */
+/* EP8  TX FIFO: 1024 bytes. start address: 0xA00 * 4. */
+/* EP9  TX FIFO: 1024 bytes. start address: 0xB00 * 4. */
+/* EP10 TX FIFO: 1024 bytes. start address: 0xC00 * 4. */
+/* EP11 TX FIFO: 512  bytes. start address: 0xD00 * 4. */
+/* EP12 TX FIFO: 512  bytes. start address: 0xD80 * 4. */
+/* EP13 TX FIFO: 512  bytes. start address: 0xE00 * 4. */
+/* EP14 TX FIFO: 512  bytes. start address: 0xE80 * 4. */
+/* EP15 TX FIFO: 512  bytes. start address: 0xF00 * 4. */
+
+#define DATA_IN_ENDPOINT_TX_FIFO1  0x01000300
+#define DATA_IN_ENDPOINT_TX_FIFO2  0x01000400
+#define DATA_IN_ENDPOINT_TX_FIFO3  0x01000500
+#define DATA_IN_ENDPOINT_TX_FIFO4  0x01000600
+#define DATA_IN_ENDPOINT_TX_FIFO5  0x01000700
+#define DATA_IN_ENDPOINT_TX_FIFO6  0x01000800
+#define DATA_IN_ENDPOINT_TX_FIFO7  0x01000900
+#define DATA_IN_ENDPOINT_TX_FIFO8  0x01000A00
+#define DATA_IN_ENDPOINT_TX_FIFO9  0x01000B00
+#define DATA_IN_ENDPOINT_TX_FIFO10 0x01000C00
+#define DATA_IN_ENDPOINT_TX_FIFO11 0x00800D00
+#define DATA_IN_ENDPOINT_TX_FIFO12 0x00800D80
+#define DATA_IN_ENDPOINT_TX_FIFO13 0x00800E00
+#define DATA_IN_ENDPOINT_TX_FIFO14 0x00800E80
+#define DATA_IN_ENDPOINT_TX_FIFO15 0x00800F00
+
+/*DWC_OTG regsiter descriptor*/
+/*Device mode CSR MAP*/
+#define DEVICE_CSR_BASE			(0x800)
+/*Device mode CSR MAP*/
+#define DEVICE_INEP_BASE		(0x900)
+/*Device mode CSR MAP*/
+#define DEVICE_OUTEP_BASE		(0xB00)
+
+/*** OTG LINK CORE REGISTERS ***/
+/* Core Global Registers */
+#define GOTGCTL     			(0x000) 
+#define GOTGINT     			(0x004)
+#define GAHBCFG     			(0x008) //Global AHB Config
+#define GAHBCFG_AHB_SINGLE              (1 << 23)
+#define GAHBCFG_NOTI_ALL_DMA_WRIT       (1 << 22)
+#define GAHBCFG_REM_MEM_SUPP            (1 << 21)
+#define GAHBCFG_P_TXF_EMP_LVL           (1 << 8)
+#define GAHBCFG_NP_TXF_EMP_LVL          (1 << 7)
+#define GAHBCFG_DMA_EN                  (1 << 5)
+#define GAHBCFG_HBSTLEN_MASK            (0xf << 1)
+#define GAHBCFG_HBSTLEN_SHIFT           1
+#define GAHBCFG_HBSTLEN_SINGLE          0
+#define GAHBCFG_HBSTLEN_INCR            1
+#define GAHBCFG_HBSTLEN_INCR4           3
+#define GAHBCFG_HBSTLEN_INCR8           5
+#define GAHBCFG_HBSTLEN_INCR16          7
+#define GAHBCFG_GLBL_INTR_EN            (1 << 0)
+#define GAHBCFG_CTRL_MASK               (GAHBCFG_P_TXF_EMP_LVL | \
+                                         GAHBCFG_NP_TXF_EMP_LVL | \
+                                         GAHBCFG_DMA_EN | \
+                                         GAHBCFG_GLBL_INTR_EN)
+#define GUSBCFG     			(0x00C)
+#define GRSTCTL     			(0x010) //Global reset control
+#define GRSTCTL_AHBIDLE                 (1 << 31)
+#define GRSTCTL_DMAREQ                  (1 << 30)
+#define GRSTCTL_TXFNUM_MASK             (0x1f << 6)
+#define GRSTCTL_TXFNUM_SHIFT            6
+#define GRSTCTL_TXFNUM_LIMIT            0x1f
+#define GRSTCTL_TXFNUM(_x)              ((_x) << 6)
+#define GRSTCTL_TXFFLSH                 (1 << 5)
+#define GRSTCTL_RXFFLSH                 (1 << 4)
+#define GRSTCTL_IN_TKNQ_FLSH            (1 << 3)
+#define GRSTCTL_FRMCNTRRST              (1 << 2)
+#define GRSTCTL_HSFTRST                 (1 << 1)
+#define GRSTCTL_CSFTRST                 (1 << 0)
+
+#define GINTSTS				    (0x014)
+#define GINTMSK     			(0x018)
+#define GRXSTSR     			(0x01C)
+#define GRXSTSP     			(0x020)
+#define GRXFSIZ     			(0x024) //Global RX FIFO Size
+#define GNPTXFSIZ   			(0x028) //Global non periodic TX FIFO Size
+#define GNPTXSTS    			(0x02C) //Global non periodic TX FIFO Status
+#define GSNPSID                 (0x040) //looks like a chip version?
+
+#define GHWCFG1     			(0x044)
+#define GHWCFG2     			(0x048)
+#define GHWCFG3     			(0x04c)
+#define GHWCFG4     			(0x050)
+#define GLPMCFG     			(0x054)
+
+#define GDFIFOCFG     			(0x05c)
+
+#define HPTXFSIZ    			(0x100)
+#define DIEPTXF(x) 			(0x100 + 4 * (x))
+#define DIEPTXF1   			(0x104)
+#define DIEPTXF2   			(0x108)
+#define DIEPTXF3   			(0x10C)
+#define DIEPTXF4   			(0x110)
+#define DIEPTXF5   			(0x114)
+#define DIEPTXF6   			(0x118)
+#define DIEPTXF7   			(0x11C)
+#define DIEPTXF8   			(0x120)
+#define DIEPTXF9   			(0x124)
+#define DIEPTXF10  			(0x128)
+#define DIEPTXF11  			(0x12C)
+#define DIEPTXF12  			(0x130)
+#define DIEPTXF13  			(0x134)
+#define DIEPTXF14  			(0x138)
+#define DIEPTXF15  			(0x13C)
+
+/*** HOST MODE REGISTERS ***/
+/* Host Global Registers */
+#define HCFG       			(0x400) // host config
+#define HFIR       			(0x404) // host frame interval
+#define HFNUM      			(0x408) // host frame number
+#define HFNUM_FRNUM_MASK                (0xffff << 0) 
+#define HPTXSTS    			(0x410) // host tx fifo stats
+#define HAINT      			(0x414) // host all channels interrupt flags
+#define HAINTMSK   			(0x418) // host all channels interrupt mask
+
+/* Host Port Control and Status Registers */
+#define HPRT        			(0x440)
+#define HPRT0_SPD_MASK                  (0x3 << 17)
+#define HPRT0_SPD_SHIFT                 17
+#define HPRT0_SPD_HIGH_SPEED            0
+#define HPRT0_SPD_FULL_SPEED            1
+#define HPRT0_SPD_LOW_SPEED             2
+#define HPRT0_TSTCTL_MASK               (0xf << 13)
+#define HPRT0_TSTCTL_SHIFT              13
+#define HPRT0_PWR                       (1 << 12)
+#define HPRT0_LNSTS_MASK                (0x3 << 10)
+#define HPRT0_LNSTS_SHIFT               10
+#define HPRT0_RST                       (1 << 8)
+#define HPRT0_SUSP                      (1 << 7)
+#define HPRT0_RES                       (1 << 6)
+#define HPRT0_OVRCURRCHG                (1 << 5)
+#define HPRT0_OVRCURRACT                (1 << 4)
+#define HPRT0_ENACHG                    (1 << 3)
+#define HPRT0_ENA                       (1 << 2)
+#define HPRT0_CONNDET                   (1 << 1)
+#define HPRT0_CONNSTS                   (1 << 0)
+
+/* Host Channel-Specific Registers */
+#define HCCHAR(x)   			(0x500 + 0x20 * (x)) //channel characteristics
+#define HCCHAR_CHENA                    (1 << 31) // channel enable
+#define HCCHAR_CHDIS                    (1 << 30) // channel disable
+#define HCCHAR_ODDFRM                   (1 << 29)
+#define HCCHAR_DEVADDR_MASK             (0x7f << 22)
+#define HCCHAR_DEVADDR_SHIFT            22
+#define HCCHAR_MULTICNT_MASK            (0x3 << 20)
+#define HCCHAR_MULTICNT_SHIFT           20
+#define HCCHAR_EPTYPE_MASK              (0x3 << 18)
+#define HCCHAR_EPTYPE_SHIFT             18
+#define HCCHAR_LSPDDEV                  (1 << 17)
+#define HCCHAR_EPDIR                    (1 << 15)
+#define HCCHAR_EPNUM_MASK               (0xf << 11)
+#define HCCHAR_EPNUM_SHIFT              11
+#define HCCHAR_MPS_MASK                 (0x7ff << 0)
+#define HCCHAR_MPS_SHIFT                0
+#define HCSPLT(x)   			(0x504 + 0x20 * (x))
+#define HCINT(x)    			(0x508 + 0x20 * (x))
+#define HCINTMSK(x) 			(0x50C + 0x20 * (x))
+#define HCINTMSK_RESERVED14_31          (0x3ffff << 14)
+#define HCINTMSK_FRM_LIST_ROLL          (1 << 13)
+#define HCINTMSK_XCS_XACT               (1 << 12)
+#define HCINTMSK_BNA                    (1 << 11)
+#define HCINTMSK_DATATGLERR             (1 << 10)
+#define HCINTMSK_FRMOVRUN               (1 << 9)
+#define HCINTMSK_BBLERR                 (1 << 8)
+#define HCINTMSK_XACTERR                (1 << 7)
+#define HCINTMSK_NYET                   (1 << 6)
+#define HCINTMSK_ACK                    (1 << 5)
+#define HCINTMSK_NAK                    (1 << 4)
+#define HCINTMSK_STALL                  (1 << 3)
+#define HCINTMSK_AHBERR                 (1 << 2)
+#define HCINTMSK_CHHLTD                 (1 << 1) //channel halted
+#define HCINTMSK_XFERCOMPL              (1 << 0)
+#define HCTSIZ(x)   			(0x510 + 0x20 * (x)) //transfer size/packet reg
+#define TSIZ_DOPNG                      (1 << 31) //do ping before transfer
+#define TSIZ_SC_MC_PID_MASK             (0x3 << 29) //USB packet id
+#define TSIZ_SC_MC_PID_SHIFT            29
+#define TSIZ_SC_MC_PID_DATA0            0
+#define TSIZ_SC_MC_PID_DATA2            1
+#define TSIZ_SC_MC_PID_DATA1            2
+#define TSIZ_SC_MC_PID_MDATA            3
+#define TSIZ_SC_MC_PID_SETUP            3
+#define TSIZ_PKTCNT_MASK                (0x3ff << 19)
+#define TSIZ_PKTCNT_SHIFT               19
+#define TSIZ_NTD_MASK                   (0xff << 8)
+#define TSIZ_NTD_SHIFT                  8
+#define TSIZ_SCHINFO_MASK               (0xff << 0)
+#define TSIZ_SCHINFO_SHIFT              0
+#define TSIZ_XFERSIZE_MASK              (0x7ffff << 0)
+#define TSIZ_XFERSIZE_SHIFT             0
+#define HCDMA(x)    			(0x514 + 0x20 * (x))
+
+/*** DEVICE MODE REGISTERS ***/
+/* Device Global Registers */
+#define DCFG        			(0x800)
+#define DCTL        			(0x804)
+#define DSTS        			(0x808)
+#define DIEPMSK     			(0x810)
+#define DOEPMSK     			(0x814)
+#define DAINT       			(0x818)
+#define DAINTMSK    			(0x81C)
+#define DTKNQR1     			(0x820)
+#define DTKNQR2     			(0x824)
+#define DVBUSDIS    			(0x828)
+#define DVBUSPULSE  			(0x82C)
+#define DTHRCTL     			(0x830)
+
+/* Device Logical IN Endpoint-Specific Registers */
+#define DIEPCTL(x)  			(0x900 + 0x20 * (x))
+#define DIEPINT(x)  			(0x908 + 0x20 * (x))
+#define DIEPTSIZ(x) 			(0x910 + 0x20 * (x))
+#define DIEPDMA(x)  			(0x914 + 0x20 * (x))
+#define DTXFSTS(x)  			(0x918 + 0x20 * (x))
+
+/* Device Logical OUT Endpoint-Specific Registers */
+#define DOEPCTL(x)  			(0xB00 + 0x20 * (x))
+#define DOEPINT(x)  			(0xB08 + 0x20 * (x))
+#define DOEPTSIZ(x) 			(0xB10 + 0x20 * (x))
+#define DOEPDMA(x)  			(0xB14 + 0x20 * (x))
+
+/* Power and Clock Gating Register */
+#define PCGCCTL				(0xE00)
+
+#define EP0FIFO				(0x1000)
+
+#define USB_ENDPOINT_XFER_CONTROL       0
+#define USB_ENDPOINT_XFER_ISOC          1
+#define USB_ENDPOINT_XFER_BULK          2
+#define USB_ENDPOINT_XFER_INT           3
+
+/**
+ * This union represents the bit fields in the DMA Descriptor
+ * status quadlet. Read the quadlet into the <i>d32</i> member then
+ * set/clear the bits using the <i>b</i>it, <i>b_iso_out</i> and
+ * <i>b_iso_in</i> elements.
+ */
+typedef union dev_dma_desc_sts {
+		/** raw register data */
+	unsigned int d32;
+		/** quadlet bits */
+	struct {
+		/** Received number of bytes */
+		unsigned bytes:16;
+		/** NAK bit - only for OUT EPs */
+		unsigned nak:1;
+		unsigned reserved17_22:6;
+		/** Multiple Transfer - only for OUT EPs */
+		unsigned mtrf:1;
+		/** Setup Packet received - only for OUT EPs */
+		unsigned sr:1;
+		/** Interrupt On Complete */
+		unsigned ioc:1;
+		/** Short Packet */
+		unsigned sp:1;
+		/** Last */
+		unsigned l:1;
+		/** Receive Status */
+		unsigned sts:2;
+		/** Buffer Status */
+		unsigned bs:2;
+	} b;
+} dev_dma_desc_sts_t;
+
+/**
+ * DMA Descriptor structure
+ *
+ * DMA Descriptor structure contains two quadlets:
+ * Status quadlet and Data buffer pointer.
+ */
+typedef struct dwc_otg_dev_dma_desc {
+	/** DMA Descriptor status quadlet */
+	dev_dma_desc_sts_t status;
+	/** DMA Descriptor data buffer pointer */
+	UINT32 buf;
+} dwc_otg_dev_dma_desc_t;
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+typedef struct _USB_OHCI_HC_DEV USB_OHCI_HC_DEV;
+
+struct _USB_OHCI_HC_DEV {
+  UINTN                     Signature;
+  EFI_USB_HC_PROTOCOL       UsbHc;
+  EFI_USB2_HC_PROTOCOL      Usb2Hc;
+  EFI_PCI_IO_PROTOCOL       *PciIo;
+  UINT64                    OriginalPciAttributes;
+
+//  HCCA_MEMORY_BLOCK         *HccaMemoryBlock;
+  VOID                      *HccaMemoryBuf;
+  VOID                      *HccaMemoryMapping;
+  UINTN                     HccaMemoryPages;
+
+//  ED_DESCRIPTOR             *IntervalList[6][32];
+//  INTERRUPT_CONTEXT_ENTRY   *InterruptContextList;
+  VOID                      *MemPool;
+
+  UINT32                    ToggleFlag;
+
+  EFI_EVENT                 HouseKeeperTimer;
+  //
+  // ExitBootServicesEvent is used to stop the OHC DMA operation
+  // after exit boot service.
+  //
+  EFI_EVENT                  ExitBootServiceEvent;
+
+  EFI_UNICODE_STRING_TABLE  *ControllerNameTable;
+
+  UINT32                    PortStatus;
+};
+
+#define USB_DW_HC_DEV_SIGNATURE     SIGNATURE_32('d','u','s','b')
+extern EFI_DRIVER_BINDING_PROTOCOL   gOhciDriverBinding;
+extern EFI_COMPONENT_NAME_PROTOCOL   gOhciComponentName;
+extern EFI_COMPONENT_NAME2_PROTOCOL  gOhciComponentName2;
+
+#define USB_OHCI_HC_DEV_FROM_THIS(a)    CR(a, USB_OHCI_HC_DEV, UsbHc, USB_DW_HC_DEV_SIGNATURE)
+#define USB2_OHCI_HC_DEV_FROM_THIS(a)    CR(a, USB_OHCI_HC_DEV, Usb2Hc, USB_DW_HC_DEV_SIGNATURE)
+
+
+
+
+
+#endif //ifndef __DW_USB_DXE_H__
diff --git a/Silicon/Synopsys/Usb/DwUsbDxe/DwUsbDxe.inf b/Silicon/Synopsys/Usb/DwUsbDxe/DwUsbDxe.inf
new file mode 100644
index 000000000..e733e1172
--- /dev/null
+++ b/Silicon/Synopsys/Usb/DwUsbDxe/DwUsbDxe.inf
@@ -0,0 +1,60 @@
+#/** @file
+#
+#  Copyright (c) 2015, Linaro Limited. All rights reserved.
+#  Copyright (c) 2015, Hisilicon Limited. All rights reserved.
+#  Copyright (c) 2017, Jeremy Linton
+#
+#  This program and the accompanying materials
+#  are licensed and made available under the terms and conditions of the BSD License
+#  which accompanies this distribution. The full text of the license may be found at
+#  http://opensource.org/licenses/bsd-license.php
+#  THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+#  WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+#
+#
+#**/
+
+[Defines]
+  INF_VERSION                    = 0x00010005
+  BASE_NAME                      = DwUsbDxe
+  FILE_GUID                      = 72d78ea6-4dee-11e3-8100-f3842a48d0a0
+  MODULE_TYPE                    = UEFI_DRIVER
+  VERSION_STRING                 = 1.0
+  ENTRY_POINT                    = DwUsbEntryPoint
+
+[Sources.common]
+  DwUsbDxe.c
+  ComponentName.c
+
+[LibraryClasses]
+  DebugLib
+  IoLib
+  MemoryAllocationLib
+  TimerLib
+  UefiLib
+  UefiBootServicesTableLib
+  UefiDriverEntryPoint
+  UncachedMemoryAllocationLib
+  CacheMaintenanceLib
+
+[Guids]
+  gEfiEventExitBootServicesGuid                 ## consume
+
+[Protocols]
+  gEfiDriverBindingProtocolGuid
+  gUsbDeviceProtocolGuid
+  gEfiUsbHcProtocolGuid                         ## produce
+  gEfiPciIoProtocolGuid                         ## TO_START
+
+
+[Packages]
+  ArmPkg/ArmPkg.dec
+  ArmPlatformPkg/ArmPlatformPkg.dec
+  MdePkg/MdePkg.dec
+  MdeModulePkg/MdeModulePkg.dec
+  EmbeddedPkg/EmbeddedPkg.dec
+  Platform/Drivers/Usb/DwUsbDxe/DwUsbDxe.dec
+
+[Pcd]
+  gDwUsbDxeTokenSpaceGuid.PcdDwUsbBaseAddress
+  gDwUsbDxeTokenSpaceGuid.PcdDwUsbSysCtrlBaseAddress
diff --git a/Silicon/Synopsys/Usb/DwUsbHostDxe/ComponentName.c b/Silicon/Synopsys/Usb/DwUsbHostDxe/ComponentName.c
new file mode 100644
index 000000000..4357e091c
--- /dev/null
+++ b/Silicon/Synopsys/Usb/DwUsbHostDxe/ComponentName.c
@@ -0,0 +1,243 @@
+/** @file
+UEFI Component Name and Name2 protocol for Designware USB driver.
+
+Copyright (c) 2013-2015 Intel Corporation.
+Copyright (c) 2017 Jeremy Linton
+
+This program and the accompanying materials
+are licensed and made available under the terms and conditions of the BSD License
+which accompanies this distribution.  The full text of the license may be found at
+http://opensource.org/licenses/bsd-license.php
+
+THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+
+
+#include <Uefi.h>
+
+#include <Protocol/UsbHostController.h>
+#include <Protocol/PciIo.h>
+
+#include <Guid/EventGroup.h>
+
+#include <Library/DebugLib.h>
+#include <Library/BaseMemoryLib.h>
+#include <Library/UefiBootServicesTableLib.h>
+#include <Library/UefiLib.h>
+#include <Library/BaseLib.h>
+#include <Library/MemoryAllocationLib.h>
+
+#include <IndustryStandard/Pci.h>
+
+#include "ComponentName.h"
+#include "DwUsbHostDxe.h"
+
+//
+// EFI Component Name Protocol
+//
+GLOBAL_REMOVE_IF_UNREFERENCED EFI_COMPONENT_NAME_PROTOCOL  gDwUsbComponentName = {
+  DwUsbComponentNameGetDriverName,
+  DwUsbComponentNameGetControllerName,
+  "eng"
+};
+
+//
+// EFI Component Name 2 Protocol
+//
+GLOBAL_REMOVE_IF_UNREFERENCED EFI_COMPONENT_NAME2_PROTOCOL gDwUsbComponentName2 = {
+  (EFI_COMPONENT_NAME2_GET_DRIVER_NAME) DwUsbComponentNameGetDriverName,
+  (EFI_COMPONENT_NAME2_GET_CONTROLLER_NAME) DwUsbComponentNameGetControllerName,
+  "en"
+};
+
+
+GLOBAL_REMOVE_IF_UNREFERENCED EFI_UNICODE_STRING_TABLE mDwUsbDriverNameTable[] = {
+  { "eng;en", L"Designware Usb Driver" },
+  { NULL, NULL }
+};
+
+
+/**
+  Retrieves a Unicode string that is the user readable name of the driver.
+
+  This function retrieves the user readable name of a driver in the form of a
+  Unicode string. If the driver specified by This has a user readable name in
+  the language specified by Language, then a pointer to the driver name is
+  returned in DriverName, and EFI_SUCCESS is returned. If the driver specified
+  by This does not support the language specified by Language,
+  then EFI_UNSUPPORTED is returned.
+
+  @param  This[in]              A pointer to the EFI_COMPONENT_NAME2_PROTOCOL or
+                                EFI_COMPONENT_NAME_PROTOCOL instance.
+
+  @param  Language[in]          A pointer to a Null-terminated ASCII string
+                                array indicating the language. This is the
+                                language of the driver name that the caller is
+                                requesting, and it must match one of the
+                                languages specified in SupportedLanguages. The
+                                number of languages supported by a driver is up
+                                to the driver writer. Language is specified
+                                in RFC 4646 or ISO 639-2 language code format.
+
+  @param  DriverName[out]       A pointer to the Unicode string to return.
+                                This Unicode string is the name of the
+                                driver specified by This in the language
+                                specified by Language.
+
+  @retval EFI_SUCCESS           The Unicode string for the Driver specified by
+                                This and the language specified by Language was
+                                returned in DriverName.
+
+  @retval EFI_INVALID_PARAMETER Language is NULL.
+
+  @retval EFI_INVALID_PARAMETER DriverName is NULL.
+
+  @retval EFI_UNSUPPORTED       The driver specified by This does not support
+                                the language specified by Language.
+
+**/
+EFI_STATUS
+EFIAPI
+DwUsbComponentNameGetDriverName (
+  IN  EFI_COMPONENT_NAME_PROTOCOL  *This,
+  IN  CHAR8                        *Language,
+  OUT CHAR16                       **DriverName
+  )
+{
+  return LookupUnicodeString2 (
+           Language,
+           This->SupportedLanguages,
+           mDwUsbDriverNameTable,
+           DriverName,
+           (BOOLEAN)(This == &gDwUsbComponentName)
+           );
+}
+
+/**
+  Retrieves a Unicode string that is the user readable name of the controller
+  that is being managed by a driver.
+
+  This function retrieves the user readable name of the controller specified by
+  ControllerHandle and ChildHandle in the form of a Unicode string. If the
+  driver specified by This has a user readable name in the language specified by
+  Language, then a pointer to the controller name is returned in ControllerName,
+  and EFI_SUCCESS is returned.  If the driver specified by This is not currently
+  managing the controller specified by ControllerHandle and ChildHandle,
+  then EFI_UNSUPPORTED is returned.  If the driver specified by This does not
+  support the language specified by Language, then EFI_UNSUPPORTED is returned.
+
+  @param  This[in]              A pointer to the EFI_COMPONENT_NAME2_PROTOCOL or
+                                EFI_COMPONENT_NAME_PROTOCOL instance.
+
+  @param  ControllerHandle[in]  The handle of a controller that the driver
+                                specified by This is managing.  This handle
+                                specifies the controller whose name is to be
+                                returned.
+
+  @param  ChildHandle[in]       The handle of the child controller to retrieve
+                                the name of.  This is an optional parameter that
+                                may be NULL.  It will be NULL for device
+                                drivers.  It will also be NULL for a bus drivers
+                                that wish to retrieve the name of the bus
+                                controller.  It will not be NULL for a bus
+                                driver that wishes to retrieve the name of a
+                                child controller.
+
+  @param  Language[in]          A pointer to a Null-terminated ASCII string
+                                array indicating the language.  This is the
+                                language of the driver name that the caller is
+                                requesting, and it must match one of the
+                                languages specified in SupportedLanguages. The
+                                number of languages supported by a driver is up
+                                to the driver writer. Language is specified in
+                                RFC 4646 or ISO 639-2 language code format.
+
+  @param  ControllerName[out]   A pointer to the Unicode string to return.
+                                This Unicode string is the name of the
+                                controller specified by ControllerHandle and
+                                ChildHandle in the language specified by
+                                Language from the point of view of the driver
+                                specified by This.
+
+  @retval EFI_SUCCESS           The Unicode string for the user readable name in
+                                the language specified by Language for the
+                                driver specified by This was returned in
+                                DriverName.
+
+  @retval EFI_INVALID_PARAMETER ControllerHandle is not a valid EFI_HANDLE.
+
+  @retval EFI_INVALID_PARAMETER ChildHandle is not NULL and it is not a valid
+                                EFI_HANDLE.
+
+  @retval EFI_INVALID_PARAMETER Language is NULL.
+
+  @retval EFI_INVALID_PARAMETER ControllerName is NULL.
+
+  @retval EFI_UNSUPPORTED       The driver specified by This is not currently
+                                managing the controller specified by
+                                ControllerHandle and ChildHandle.
+
+  @retval EFI_UNSUPPORTED       The driver specified by This does not support
+                                the language specified by Language.
+
+**/
+EFI_STATUS
+EFIAPI
+DwUsbComponentNameGetControllerName (
+  IN  EFI_COMPONENT_NAME_PROTOCOL                     *This,
+  IN  EFI_HANDLE                                      ControllerHandle,
+  IN  EFI_HANDLE                                      ChildHandle        OPTIONAL,
+  IN  CHAR8                                           *Language,
+  OUT CHAR16                                          **ControllerName
+  )
+{
+  EFI_STATUS           Status;
+  DWUSB_OTGHC_DEV      *DwUsbDev;
+  EFI_USB2_HC_PROTOCOL  *UsbHc;
+
+  //
+  // This is a device driver, so ChildHandle must be NULL.
+  //
+  if (ChildHandle != NULL) {
+    return EFI_UNSUPPORTED;
+  }
+  //
+  // Make sure this driver is currently managing ControllerHandle
+  //
+/*  Status = EfiTestManagedDevice (
+             ControllerHandle,
+             gOhciDriverBinding.DriverBindingHandle,
+             &gEfiPciIoProtocolGuid
+             );
+  if (EFI_ERROR (Status)) {
+    return Status;
+}*/
+  //
+  // Get the device context
+  //
+  Status = gBS->OpenProtocol (
+                  ControllerHandle,
+                  &gEfiUsb2HcProtocolGuid,
+                  (VOID **) &UsbHc,
+                  gDwUsbDriverBinding.DriverBindingHandle,
+                  ControllerHandle,
+                  EFI_OPEN_PROTOCOL_GET_PROTOCOL
+                  );
+  if (EFI_ERROR (Status)) {
+    return Status;
+  }
+
+  DwUsbDev = DWHC_FROM_THIS(UsbHc);
+
+  return LookupUnicodeString2 (
+           Language,
+           This->SupportedLanguages,
+           DwUsbDev->ControllerNameTable,
+           ControllerName,
+           (BOOLEAN)(This == &gDwUsbComponentName)
+           );
+
+}
diff --git a/Silicon/Synopsys/Usb/DwUsbHostDxe/ComponentName.h b/Silicon/Synopsys/Usb/DwUsbHostDxe/ComponentName.h
new file mode 100644
index 000000000..814a8501d
--- /dev/null
+++ b/Silicon/Synopsys/Usb/DwUsbHostDxe/ComponentName.h
@@ -0,0 +1,148 @@
+/** @file
+UEFI Component Name and Name2 protocol for Designware USB driver.
+
+Copyright (c) 2013-2015 Intel Corporation.
+Copyright (c) 2017 Jeremy Linton
+
+This program and the accompanying materials
+are licensed and made available under the terms and conditions of the BSD License
+which accompanies this distribution.  The full text of the license may be found at
+http://opensource.org/licenses/bsd-license.php
+
+THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+#ifndef _COMPONENT_NAME_H_
+#define _COMPONENT_NAME_H_
+
+
+/**
+  Retrieves a Unicode string that is the user readable name of the driver.
+
+  This function retrieves the user readable name of a driver in the form of a
+  Unicode string. If the driver specified by This has a user readable name in
+  the language specified by Language, then a pointer to the driver name is
+  returned in DriverName, and EFI_SUCCESS is returned. If the driver specified
+  by This does not support the language specified by Language,
+  then EFI_UNSUPPORTED is returned.
+
+  @param  This[in]              A pointer to the EFI_COMPONENT_NAME2_PROTOCOL or
+                                EFI_COMPONENT_NAME_PROTOCOL instance.
+
+  @param  Language[in]          A pointer to a Null-terminated ASCII string
+                                array indicating the language. This is the
+                                language of the driver name that the caller is
+                                requesting, and it must match one of the
+                                languages specified in SupportedLanguages. The
+                                number of languages supported by a driver is up
+                                to the driver writer. Language is specified
+                                in RFC 4646 or ISO 639-2 language code format.
+
+  @param  DriverName[out]       A pointer to the Unicode string to return.
+                                This Unicode string is the name of the
+                                driver specified by This in the language
+                                specified by Language.
+
+  @retval EFI_SUCCESS           The Unicode string for the Driver specified by
+                                This and the language specified by Language was
+                                returned in DriverName.
+
+  @retval EFI_INVALID_PARAMETER Language is NULL.
+
+  @retval EFI_INVALID_PARAMETER DriverName is NULL.
+
+  @retval EFI_UNSUPPORTED       The driver specified by This does not support
+                                the language specified by Language.
+
+**/
+EFI_STATUS
+EFIAPI
+DwUsbComponentNameGetDriverName (
+  IN  EFI_COMPONENT_NAME_PROTOCOL  *This,
+  IN  CHAR8                        *Language,
+  OUT CHAR16                       **DriverName
+  );
+
+
+/**
+  Retrieves a Unicode string that is the user readable name of the controller
+  that is being managed by a driver.
+
+  This function retrieves the user readable name of the controller specified by
+  ControllerHandle and ChildHandle in the form of a Unicode string. If the
+  driver specified by This has a user readable name in the language specified by
+  Language, then a pointer to the controller name is returned in ControllerName,
+  and EFI_SUCCESS is returned.  If the driver specified by This is not currently
+  managing the controller specified by ControllerHandle and ChildHandle,
+  then EFI_UNSUPPORTED is returned.  If the driver specified by This does not
+  support the language specified by Language, then EFI_UNSUPPORTED is returned.
+
+  @param  This[in]              A pointer to the EFI_COMPONENT_NAME2_PROTOCOL or
+                                EFI_COMPONENT_NAME_PROTOCOL instance.
+
+  @param  ControllerHandle[in]  The handle of a controller that the driver
+                                specified by This is managing.  This handle
+                                specifies the controller whose name is to be
+                                returned.
+
+  @param  ChildHandle[in]       The handle of the child controller to retrieve
+                                the name of.  This is an optional parameter that
+                                may be NULL.  It will be NULL for device
+                                drivers.  It will also be NULL for a bus drivers
+                                that wish to retrieve the name of the bus
+                                controller.  It will not be NULL for a bus
+                                driver that wishes to retrieve the name of a
+                                child controller.
+
+  @param  Language[in]          A pointer to a Null-terminated ASCII string
+                                array indicating the language.  This is the
+                                language of the driver name that the caller is
+                                requesting, and it must match one of the
+                                languages specified in SupportedLanguages. The
+                                number of languages supported by a driver is up
+                                to the driver writer. Language is specified in
+                                RFC 4646 or ISO 639-2 language code format.
+
+  @param  ControllerName[out]   A pointer to the Unicode string to return.
+                                This Unicode string is the name of the
+                                controller specified by ControllerHandle and
+                                ChildHandle in the language specified by
+                                Language from the point of view of the driver
+                                specified by This.
+
+  @retval EFI_SUCCESS           The Unicode string for the user readable name in
+                                the language specified by Language for the
+                                driver specified by This was returned in
+                                DriverName.
+
+  @retval EFI_INVALID_PARAMETER ControllerHandle is not a valid EFI_HANDLE.
+
+  @retval EFI_INVALID_PARAMETER ChildHandle is not NULL and it is not a valid
+                                EFI_HANDLE.
+
+  @retval EFI_INVALID_PARAMETER Language is NULL.
+
+  @retval EFI_INVALID_PARAMETER ControllerName is NULL.
+
+  @retval EFI_UNSUPPORTED       The driver specified by This is not currently
+                                managing the controller specified by
+                                ControllerHandle and ChildHandle.
+
+  @retval EFI_UNSUPPORTED       The driver specified by This does not support
+                                the language specified by Language.
+
+**/
+EFI_STATUS
+EFIAPI
+DwUsbComponentNameGetControllerName (
+  IN  EFI_COMPONENT_NAME_PROTOCOL                     *This,
+  IN  EFI_HANDLE                                      ControllerHandle,
+  IN  EFI_HANDLE                                      ChildHandle        OPTIONAL,
+  IN  CHAR8                                           *Language,
+  OUT CHAR16                                          **ControllerName
+  );
+
+#endif
+
diff --git a/Silicon/Synopsys/Usb/DwUsbHostDxe/DwUsbHostDxe.c b/Silicon/Synopsys/Usb/DwUsbHostDxe/DwUsbHostDxe.c
new file mode 100644
index 000000000..28a3cde98
--- /dev/null
+++ b/Silicon/Synopsys/Usb/DwUsbHostDxe/DwUsbHostDxe.c
@@ -0,0 +1,2043 @@
+/** @file
+
+    Copyright (c) 2015, Linaro Limited. All rights reserved.
+    Copyright (c) 2015, Hisilicon Limited. All rights reserved.
+	Copyright (c) 2017, Jeremy Linton
+
+    This program and the accompanying materials
+    are licensed and made available under the terms and conditions of the BSD License
+    which accompanies this distribution.  The full text of the license may be found at
+    http://opensource.org/licenses/bsd-license.php
+
+    THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+    WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+
+// Some notes about this driver:
+//
+//  First as it stands all transfers are routed through the "nonperiodic" queues
+//  including interrupt transfers. This means we emulate interrupt transfers using
+//  the UEFI timer and a queue. All the fancy hardware scheduling is unused.
+//
+//  This also means that there is absolutely no prioritization, bandwidth reservations
+//  or anything else that are generally required of interrupt/isochronous transfers.
+//
+//  We no round robin the channels, this in theory allows us to have multiple commands
+//  outstanding, but due to the fact that we are either using a timer and mostly
+//  blocking thta timer during the command submission, its really unlikely that we 
+//  have more than a single command outstanding.
+//
+//  At the moment this is host only driver, and the phy config, which should be attached
+//  to the DW i2c channel likely isn't. 
+//
+//  This driver defaults to High speed, but if we detect split transaction problems with
+//  low/full speed devices then we reset the root port and everything attached, and restart
+//  at a lower speed. This allows us to transparently support high/full/low speed devices. 
+//  That said, it seems low speed devices don't really work worth a darn on this controller. 
+//  There are assorted knobs that can be tiwiddled to tweak the low speed bitstream, but
+//  my USB analyzer is truly just a protocol analyzer and is unable to tell me how far out
+//  of spec the physical singaling is, and I'm currently to lazy to try an analyze it 
+//  with my scope/logic analyzer.
+//
+
+#include "DwUsbHostDxe.h"
+#include "DwcHw.h"
+
+// Enabling this, disables attempting split transactions, and 
+// sets the initial root port to full speed (rather than high)
+// This option is less useful now that we detect full/low speed
+// devices having split transaction problems and automatically 
+// reset to full speed
+#define DW_AT_FULLSPEED 0
+
+// Forcing host mode may allow HS/FS/LS devices? Nah, doesn't 
+// appear that way on the HiSi, but do it anyway for the time.
+#define DW_FORCE_HOST   1 
+
+// This timer controls how frequently we wake up to service
+// interrupt transfers (in milliseconds). 
+#define DW_USB_POLL_TIMER 50
+
+// timeout for interrupt transfers
+#define DW_USB_POLL_INTERRUPT   100 //100 ms
+// We delay ops for a few poll intervals following bulk transfers
+// in a lame (non USB standard) way to avoid burning bandwidth
+// on interrupt transfers if bulk/setup is active. This also
+// avoids colliding interrupts with bulk transfers although this
+// seems to work fine now.
+#define POLL_DELAY 10
+
+
+VOID DwHcInit (IN DWUSB_OTGHC_DEV *DwHc);
+VOID DwCoreInit (IN DWUSB_OTGHC_DEV *DwHc);
+
+
+#define HI6220_PERI_BASE         0xF7030000
+#define PERI_SC_PERIPH_CLK0_EN	 0x200
+#define PERI_SC_PERIPH_CLK0_DIS	 0x204
+#define PERI_SC_PERIPH_CLK0_STAT 0x208
+/* this routine is the only really HiKey specific routine
+   in the module, replace it with appropriate calls elsewhere */
+VOID
+ConfigureUsbPhy (
+    VOID
+    )
+{
+    UINT32 Data;
+    DEBUG ((EFI_D_VERBOSE, "ConfigureUsbPhy \n",__func__));
+    /*Enable USB clock*/
+    Data = MmioRead32 (HI6220_PERI_BASE + PERI_SC_PERIPH_CLK0_EN);
+    Data |= 0x10;
+    MmioWrite32 (HI6220_PERI_BASE + PERI_SC_PERIPH_CLK0_EN, 0x10);
+
+    do {
+        Data = MmioRead32 (HI6220_PERI_BASE + PERI_SC_PERIPH_CLK0_STAT);
+    } while ((Data & 0x10) == 0);
+
+    /*Take USB IPs out of reset*/
+    MmioWrite32 (0xF7030000 + 0x304, 0xF0);
+
+    do {
+        Data = MmioRead32 (HI6220_PERI_BASE + 0x308);
+        Data &= 0xF0;
+    } while (Data);
+
+    /*CTRL5*/
+    Data = MmioRead32 (HI6220_PERI_BASE + 0x010);
+    Data &= ~0x20;
+    Data |= 0x318;
+    MmioWrite32 (HI6220_PERI_BASE + 0x010, Data);
+
+    /*CTRL4*/
+    /*Configure USB PHY*/
+    Data = MmioRead32 (HI6220_PERI_BASE + 0x00C);
+
+    /*make PHY out of low power mode*/
+    Data &= ~0x40;
+    Data &= ~0x100;
+    Data |= 0xC00;
+    Data &= ~0x200000;
+    MmioWrite32 (HI6220_PERI_BASE + 0x00C, Data);
+
+    MmioWrite32 (HI6220_PERI_BASE + 0x018, 0x70533483); //EYE_PATTERN
+
+    MicroSecondDelay (5000);
+}
+
+UINT32
+Wait4Bit (
+    IN UINT32     Reg,
+    IN UINT32     Mask,
+    IN BOOLEAN    Set
+    )
+{
+    UINT32  Timeout = DW_USB_POLL_INTERRUPT;
+    UINT32  Value;
+    DEBUG ((EFI_D_VERBOSE, "Wait4Bit \n",__func__));
+
+    while (--Timeout) {
+        Value = MmioRead32 (Reg);
+        if (!Set)
+            Value = ~Value;
+
+        if ((Value & Mask) == Mask) {
+            DEBUG ((EFI_D_VERBOSE, "Wait4Bit val=%X return\n",Value));
+            return 0;
+        }
+
+        MicroSecondDelay (1);
+    }
+
+//    DEBUG ((EFI_D_ERROR, "Wait4Bit: Timeout (Reg:0x%x, mask:0x%x, wait_set:%d, val:0x%X)\n", Reg, Mask, Set, Value));
+
+    return 1;
+}
+
+
+UINT32
+Wait4AnyBit (
+    IN UINT32     Reg,
+    IN UINT32     Mask,
+	IN UINT32     MaskFail,
+	IN UINT32     Timeout // in milliseconds
+    )
+{
+    UINT32  Value = MmioRead32 (Reg);
+    Timeout *= 1000; // we want this in microseconds
+    DEBUG ((EFI_D_VERBOSE, "Wait4AnyBit \n"));
+
+    while (--Timeout) {
+        Value = MmioRead32 (Reg);
+
+        if (Value & Mask) {
+            DEBUG ((EFI_D_VERBOSE, "Wait4AnyBit val=%X return\n",Value));
+            return 0;
+        }
+		// fail early
+		if ((Timeout < DW_USB_POLL_INTERRUPT/4) & (Value & MaskFail)) {
+			DEBUG ((EFI_D_ERROR, "Wait4AnyBit val=%X early fail return\n",Value));
+			return 0;
+		}
+
+        MicroSecondDelay (1);
+    }
+
+    DEBUG ((EFI_D_VERBOSE, "Wait4AnyBit: Timeout (Reg:0x%x, mask:0x%x, val:0x%X)\n", Reg, Mask, Value));
+
+    return 1;
+}
+
+
+// The Num parameter corresponds to the FIFO being flushed
+//  0000 Non periodic TX FIFO in host mode
+//  0001 Periodic FIFO host mode
+//  xxx0 Device mode FIFO
+// 10000 Flush all transmit FIFOs
+VOID
+DwFlushTxFifo (
+    IN DWUSB_OTGHC_DEV *DwHc,
+    IN INT32 Num
+    )
+{
+    UINT32 Status;
+    DEBUG ((EFI_D_VERBOSE, "DwFlushTxFifo \n",__func__));
+    MmioWrite32 (DwHc->DwUsbBase + GRSTCTL, DWC2_GRSTCTL_TXFFLSH | (Num << DWC2_GRSTCTL_TXFNUM_OFFSET));
+
+    Status = Wait4Bit (DwHc->DwUsbBase + GRSTCTL, DWC2_GRSTCTL_TXFFLSH, 0);
+    if (Status)
+        DEBUG ((EFI_D_ERROR, "DwFlushTxFifo: Timeout!\n"));
+
+    MicroSecondDelay (1);
+}
+
+VOID
+DwFlushRxFifo (
+    IN DWUSB_OTGHC_DEV *DwHc
+    )
+{
+    UINT32 Status;
+    DEBUG ((EFI_D_VERBOSE, "DwFlushRxFifo \n",__func__));
+    MmioWrite32 (DwHc->DwUsbBase + GRSTCTL, DWC2_GRSTCTL_RXFFLSH);
+
+    Status = Wait4Bit (DwHc->DwUsbBase + GRSTCTL, DWC2_GRSTCTL_RXFFLSH, 0);
+    if (Status)
+        DEBUG ((EFI_D_ERROR, "DwFlushRxFifo: Timeout!\n"));
+
+    MicroSecondDelay (1);
+}
+
+void DwUsbAttemptClear(
+	IN DWUSB_OTGHC_DEV  *DwHc,
+	IN UINT32   Channel
+	)
+{
+
+	MmioWrite32 (DwHc->DwUsbBase + HCINT(Channel), 0x3FFF);		
+	// disable channel
+	MmioAndThenOr32 (DwHc->DwUsbBase + HCCHAR(Channel),
+					 ~(DWC2_HCCHAR_CHEN | DWC2_HCCHAR_EPDIR),
+					 DWC2_HCCHAR_CHDIS);
+
+    DwFlushTxFifo (DwHc, 0x00); //flush non periodic queue
+    DwFlushRxFifo (DwHc);
+
+    MicroSecondDelay (50000);	
+
+	MmioWrite32 (DwHc->DwUsbBase + HCINT(Channel), 0x3FFF);		
+
+	MmioAndThenOr32 (DwHc->DwUsbBase + HCCHAR(Channel),
+					 ~(DWC2_HCCHAR_EPDIR|DWC2_HCCHAR_CHDIS),
+					 DWC2_HCCHAR_CHEN|DWC2_HCCHAR_CHDIS);
+	Wait4Bit (DwHc->DwUsbBase + HCCHAR(Channel), DWC2_HCCHAR_CHEN, 0);
+}
+
+
+UINT32
+Wait4Chhltd (
+    IN DWUSB_OTGHC_DEV  *DwHc,
+	IN UINT32   Channel,
+    IN UINT32   *Sub,
+    IN UINT32   *Toggle,
+    IN BOOLEAN   IgnoreAck,
+	IN BOOLEAN   IgnoreComplete,
+	IN UINT32    Timeout
+    )
+{
+    UINT32  HcintCompHltAck = DWC2_HCINT_XFERCOMP | DWC2_HCINT_CHHLTD;
+    INT32 Ret;
+    UINT32  Hcint, Hctsiz;
+    DEBUG ((EFI_D_VERBOSE, "Wait4Chhltd \n",__func__));
+
+    MicroSecondDelay (100);
+//    Ret = Wait4Bit (DwHc->DwUsbBase + HCINT(Channel), DWC2_HCINT_CHHLTD, 1); //wait only for channel halt, cosider waiting for NAK/STALL too....
+
+//    Ret = Wait4AnyBit (DwHc->DwUsbBase + HCINT(Channel), DWC2_HCINT_CHHLTD|DWC2_HCINT_XFERCOMP, DWC2_HCINT_NAK|DWC2_HCINT_STALL); //Ok really the sequence should be wait for complete
+	// then halt the channel and wait for channel halt
+	Ret = Wait4AnyBit (DwHc->DwUsbBase + HCINT(Channel), DWC2_HCINT_CHHLTD, DWC2_HCINT_NAK|DWC2_HCINT_STALL, Timeout); //for whatever reason just waiting for halt tends to work
+
+    MicroSecondDelay (100);
+    Hcint = MmioRead32 (DwHc->DwUsbBase + HCINT(Channel));
+    if (Hcint & DWC2_HCINT_STALL) {
+        DEBUG ((EFI_D_ERROR, "Wait4Chhltd: STALL Hcint=%X\n", Hcint));
+		DwUsbAttemptClear(DwHc, Channel);
+        return EFI_USB_ERR_STALL;
+    }
+    if (Hcint & DWC2_HCINT_BBLERR)  {
+        DEBUG ((EFI_D_ERROR, "Wait4Chhltd: BABBLE Hcint=%X\n", Hcint));
+        return EFI_USB_ERR_BABBLE;
+    }   
+    if (Hcint & DWC2_HCINT_FRMOVRUN) {
+        DEBUG ((EFI_D_VERBOSE, "Wait4Chhltd: Overrun Hcint=%X\n", Hcint));
+        return EFI_USB_ERR_SYSTEM+1;
+    }
+
+    if (Hcint & DWC2_HCINT_XACTERR) {
+        DEBUG ((EFI_D_ERROR, "Wait4Chhltd: CRC/bitstuff/etc error Hcint=%X\n", Hcint));
+        return EFI_USB_ERR_CRC;
+    }
+
+    if (Hcint & DWC2_HCINT_NAK) {
+        //NAKs are part of the normal interrupt protocol
+        DEBUG ((EFI_D_VERBOSE, "Wait4Chhltd: NAK Hcint=%X\n", Hcint)); 
+        return EFI_USB_ERR_NAK;
+    }
+
+    if (Hcint & DWC2_HCINT_DATATGLERR) {
+        DEBUG ((EFI_D_ERROR, "Wait4Chhltd: DATA toggle Hcint=%X\n", Hcint));
+        return EFI_USB_ERR_SYSTEM; //what is the correct return? 
+    }
+
+    // Moved this down here so that NAK & other error conditions are 
+    // handled before timeout
+    if (Ret) {
+        DEBUG ((EFI_D_VERBOSE, "Wait4Chhltd ret\n"));
+		DwUsbAttemptClear(DwHc, Channel);
+        return EFI_USB_ERR_TIMEOUT;
+    }
+
+	// A happy transfer is halted/complete/acked
+	// an ignore ack transaction is just complete/halted
+    if (IgnoreAck) {
+        Hcint &= ~DWC2_HCINT_ACK;
+    }
+    else {
+        HcintCompHltAck |= DWC2_HCINT_ACK;
+    }
+	if (IgnoreComplete)	{
+		Hcint |= DWC2_HCINT_XFERCOMP;
+	}
+
+    if (Hcint != HcintCompHltAck) {
+        DEBUG ((EFI_D_ERROR, "Wait4Chhltd: HCINT Error 0x%x\n", Hcint));
+        return EFI_USB_ERR_STALL; //JL take this out to unstick device?
+    }
+
+    Hctsiz = MmioRead32 (DwHc->DwUsbBase + HCTSIZ(Channel));
+    *Sub = (Hctsiz & DWC2_HCTSIZ_XFERSIZE_MASK) >> DWC2_HCTSIZ_XFERSIZE_OFFSET;
+    *Toggle = (Hctsiz & DWC2_HCTSIZ_PID_MASK) >> DWC2_HCTSIZ_PID_OFFSET;
+
+    return EFI_USB_NOERROR;
+}
+
+VOID
+DwOtgHcInit (
+    IN DWUSB_OTGHC_DEV  *DwHc,
+    IN UINT8    Channel,
+    IN UINT8    DevAddr,
+    IN UINT8    Endpoint,
+    IN UINT8    EpDir,
+    IN UINT8    EpType,
+    IN UINT16   MaxPacket,
+	IN UINT8    DeviceSpeed,
+	IN UINT8    TtPort,
+	IN UINT8    TtHub,
+	IN UINT8    DoComplete
+    )
+{
+	UINT32 Split = 0;
+    UINT32  Hcchar = (DevAddr << DWC2_HCCHAR_DEVADDR_OFFSET) |
+        (Endpoint << DWC2_HCCHAR_EPNUM_OFFSET) |
+        (EpDir << DWC2_HCCHAR_EPDIR_OFFSET) |
+        (EpType << DWC2_HCCHAR_EPTYPE_OFFSET) |
+        (MaxPacket << DWC2_HCCHAR_MPS_OFFSET);
+
+	if ((DeviceSpeed != EFI_USB_SPEED_HIGH) && (!DwHc->AtFullSpeed))
+	{
+		DEBUG ((EFI_D_ERROR, "Split Message to %d speed device (%d,%d)  \n", DeviceSpeed, TtPort, TtHub));
+		Split = TtPort | (TtHub << DWC2_HCSPLT_HUBADDR_OFFSET);
+		Split |= DWC2_HCSPLT_XACTPOS_ALL << DWC2_HCSPLT_XACTPOS_OFFSET; //do all packets? Or just the data payload?
+//		Split |= DWC2_HCSPLT_XACTPOS_BEGIN << DWC2_HCSPLT_XACTPOS_OFFSET;
+		Split |= DoComplete?DWC2_HCSPLT_COMPSPLT:0;
+		//Split |= DWC2_HCSPLT_COMPSPLT; //do a complete split transaction? (docs aren't 100% clear on what this means, although maybe its because i'm in DMA mode (hint that splits may not work with DMA)
+		Split |= DWC2_HCSPLT_SPLTENA;
+		// Do we need to set lowspeed? I'm guessing this is only when the root port is full/low
+		// because the "speed" of a split transaction is still high to the TT..
+		Hcchar |= DWC2_HCCHAR_LSPDDEV;
+	} 
+	else if (DeviceSpeed == EFI_USB_SPEED_LOW)
+	{
+		Hcchar |= DWC2_HCCHAR_LSPDDEV;
+	}
+
+    DEBUG ((EFI_D_VERBOSE, "DwOtgHcInit \n",__func__));
+
+    MmioWrite32 (DwHc->DwUsbBase + HCINT(Channel), 0x3FFF);
+
+    MmioWrite32 (DwHc->DwUsbBase + HCCHAR(Channel), Hcchar);
+
+    MmioWrite32 (DwHc->DwUsbBase + HCSPLT(Channel), Split); 
+}
+
+VOID
+DwCoreReset (
+    IN DWUSB_OTGHC_DEV *DwHc
+    )
+{
+    UINT32  Status;
+    DEBUG ((EFI_D_VERBOSE, "DwCoreReset \n",__func__));
+
+    Status = Wait4Bit (DwHc->DwUsbBase + GRSTCTL, DWC2_GRSTCTL_AHBIDLE, 1);
+    if (Status)
+        DEBUG ((EFI_D_ERROR, "DwCoreReset: Timeout!\n"));
+
+    MmioWrite32 (DwHc->DwUsbBase + GRSTCTL, DWC2_GRSTCTL_CSFTRST);
+
+    Status = Wait4Bit (DwHc->DwUsbBase + GRSTCTL, DWC2_GRSTCTL_CSFTRST, 0);
+    if (Status)
+        DEBUG ((EFI_D_ERROR, "DwCoreReset: Timeout!\n"));
+
+    MicroSecondDelay (100000);
+}
+
+EFI_STATUS
+DwHcTransfer (
+    IN     DWUSB_OTGHC_DEV  *DwHc,
+    IN     UINT8      DeviceAddress,
+    IN     UINTN      MaximumPacketLength,
+    IN OUT UINT32     *Pid,
+    IN     UINT32     TransferDirection,
+    IN OUT VOID       *Data,
+    IN OUT UINTN      *DataLength,
+    IN     UINT32     EpAddress,
+    IN     UINT32     EpType,
+    OUT    UINT32     *TransferResult,
+    IN     BOOLEAN    IgnoreAck,
+    IN     BOOLEAN    DoPing,
+	IN     UINT8      DeviceSpeed,
+	IN     UINT8      TtPort,
+	IN     UINT8      TtHub,
+	IN     UINT8      IgnoreComplete,
+	IN     UINT32     Timeout
+    )
+{
+    UINT32                          TxferLen;
+    UINTN                           BufferLen;
+    UINT32                          Done = 0;
+    UINT32                          NumPackets;
+    UINT32                          Sub;
+    UINT32                          StopTransfer = 0;
+    EFI_STATUS                      Status = EFI_SUCCESS;
+	UINT32                          SplitDone = 0;
+	EFI_PHYSICAL_ADDRESS            BusPhysAddr;
+	VOID                            *Mapping = NULL;
+	// picking a channel based on EP works in this driver but doesn't seem to afford andy
+	// advantages (at the moment).
+//	UINT32                          Channel = (EpAddress & 0x7F) % DWC2_MAX_CHANNELS;
+	EFI_TPL                         OriginalTPL;				
+//	UINT32                          Channel = DWC2_HC_CHANNEL; //just use channel 0 for everything
+//	UINT32                          Channel = 0;
+
+	static UINT32                   StaticChannel = 0;
+	UINT32                          Channel = (StaticChannel++) % DWC2_MAX_CHANNELS;
+	UINT32                          ChannelRetries = DWC2_MAX_CHANNELS;
+
+	OriginalTPL = gBS->RaiseTPL(TPL_HIGH_LEVEL);    
+	for (ChannelRetries = 0 ; ChannelRetries < DWC2_MAX_CHANNELS; ChannelRetries++)
+	{
+		if (DwHc->ActiveChannel[Channel])
+		{
+			Channel++;
+			DEBUG ((EFI_D_ERROR, "DwHcTransfer: Channel Collision\n"));
+		}
+		else
+		{
+			DwHc->ActiveChannel[Channel] = TRUE;
+			break;
+		}
+	}
+	gBS->RestoreTPL (OriginalTPL);
+
+	if (ChannelRetries == DWC2_MAX_CHANNELS)
+	{
+		DEBUG ((EFI_D_ERROR, "DwHcTransfer: Out of channels\n"));
+	}
+ 	DEBUG ((EFI_D_VERBOSE, "DwHcTransfer channel=%d\n",Channel));
+
+
+	OriginalTPL = gBS->RaiseTPL(TPL_NOTIFY);
+
+    do {
+        DwOtgHcInit (DwHc, Channel, DeviceAddress, EpAddress, TransferDirection, EpType, MaximumPacketLength, DeviceSpeed, TtPort, TtHub, SplitDone);
+
+        TxferLen = *DataLength - Done;
+        if (TxferLen > DWC2_MAX_TRANSFER_SIZE)
+            TxferLen = DWC2_MAX_TRANSFER_SIZE - MaximumPacketLength + 1;
+        if (TxferLen > DWC2_DATA_BUF_SIZE)
+            TxferLen = DWC2_DATA_BUF_SIZE - MaximumPacketLength + 1;
+
+        if (TxferLen > 0) {
+            NumPackets = (TxferLen + MaximumPacketLength - 1) / MaximumPacketLength;
+            if (NumPackets > DWC2_MAX_PACKET_COUNT) {
+                NumPackets = DWC2_MAX_PACKET_COUNT;
+                TxferLen = NumPackets * MaximumPacketLength;
+            }
+        } else {
+            NumPackets = 1;
+        }
+
+        if (TransferDirection)
+            TxferLen = NumPackets * MaximumPacketLength;
+
+        MmioWrite32 (DwHc->DwUsbBase + HCTSIZ(Channel), (TxferLen << DWC2_HCTSIZ_XFERSIZE_OFFSET) |
+                     (NumPackets << DWC2_HCTSIZ_PKTCNT_OFFSET) | (DoPing << DWC2_HCTSIZ_DOPNG_OFFSET) |
+                     (*Pid << DWC2_HCTSIZ_PID_OFFSET));
+
+		DEBUG ((EFI_D_VERBOSE, "Usb: dma (%d) size %d %d\n",TransferDirection, *DataLength, TxferLen));
+
+		if (TransferDirection) // direction=1 IN from USB
+		{
+			if (*DataLength < TxferLen)
+			{
+				BufferLen = *DataLength;
+			}
+			else
+			{
+				BufferLen = TxferLen;
+			}
+			Status = DwHc->PciIo->Map (DwHc->PciIo, EfiPciIoOperationBusMasterWrite , Data+Done , &BufferLen, &BusPhysAddr, &Mapping);
+		}
+		else 
+		{
+			BufferLen = TxferLen;
+			Status = DwHc->PciIo->Map (DwHc->PciIo, EfiPciIoOperationBusMasterRead , Data+Done , &BufferLen, &BusPhysAddr, &Mapping);
+		}
+
+		// something is horribly wrong with the way i'm binding the PciIo if this stabilizes 
+		// the transfers (and it removes nearly all the remaining stalls)
+		asm("dsb sy");
+		asm("isb sy");
+
+		if (EFI_ERROR (Status)) {
+				DEBUG ((EFI_D_ERROR, "Usb: Map DMA failed\n"));
+		}
+
+        MmioWrite32 (DwHc->DwUsbBase + HCDMA(Channel), (UINTN)BusPhysAddr);
+
+        MmioAndThenOr32 (DwHc->DwUsbBase + HCCHAR(Channel), ~(DWC2_HCCHAR_MULTICNT_MASK |
+															  DWC2_HCCHAR_CHEN |
+															  DWC2_HCCHAR_CHDIS),
+                         ((1 << DWC2_HCCHAR_MULTICNT_OFFSET) |
+                          DWC2_HCCHAR_CHEN));
+
+//		ArmDataSynchronizationBarrier();
+
+        *TransferResult = Wait4Chhltd (DwHc, Channel, &Sub, Pid, IgnoreAck, IgnoreComplete, Timeout);
+		if ((DeviceSpeed != EFI_USB_SPEED_HIGH) && (!SplitDone) && (!DwHc->AtFullSpeed))
+		{
+			SplitDone++;
+			MmioWrite32 (DwHc->DwUsbBase + HCINT(Channel), 0x3FFF);
+			MmioAndThenOr32 (DwHc->DwUsbBase + HCCHAR(Channel), ~(DWC2_HCCHAR_MULTICNT_MASK | DWC2_HCCHAR_CHEN | DWC2_HCCHAR_CHDIS),
+							 ((1 << DWC2_HCCHAR_MULTICNT_OFFSET) | DWC2_HCCHAR_CHEN | DWC2_HCSPLT_COMPSPLT));
+			*TransferResult = Wait4Chhltd (DwHc, Channel, &Sub, Pid, IgnoreAck, IgnoreComplete, Timeout);
+//						continue;
+		}
+
+		DwHc->PciIo->Flush(DwHc->PciIo);
+
+		if (Mapping)
+		{
+			DwHc->PciIo->Unmap (DwHc->PciIo, Mapping);
+			Mapping = NULL;
+		}
+
+        if (*TransferResult) {
+            DEBUG ((EFI_D_VERBOSE, "DwHcTransfer: failed\n"));
+            Status = EFI_DEVICE_ERROR;
+            break;
+        }
+
+        if (TransferDirection) {
+            TxferLen -= Sub;
+            if (Sub)
+                StopTransfer = 1;
+		}
+
+
+        Done += TxferLen;
+    } while (Done < *DataLength && !StopTransfer);
+
+    MmioWrite32 (DwHc->DwUsbBase + HCINTMSK(Channel), 0);
+    MmioWrite32 (DwHc->DwUsbBase + HCINT(Channel), 0xFFFFFFFF);
+
+    *DataLength = Done;
+
+	gBS->RestoreTPL (OriginalTPL);
+
+	OriginalTPL = gBS->RaiseTPL(TPL_HIGH_LEVEL);    
+	DwHc->ActiveChannel[Channel] = FALSE;
+	gBS->RestoreTPL (OriginalTPL);
+
+    return Status;
+}
+
+/**
+   EFI_USB2_HC_PROTOCOL APIs
+**/
+
+EFI_STATUS
+EFIAPI
+DwHcGetCapability (
+    IN  EFI_USB2_HC_PROTOCOL  *This,
+    OUT UINT8                 *MaxSpeed,
+    OUT UINT8                 *PortNumber,
+    OUT UINT8                 *Is64BitCapable
+    )
+{
+    DWUSB_OTGHC_DEV *DwHc;
+    DEBUG ((EFI_D_VERBOSE, "DwHcGetCapability \n",__func__));
+
+    DwHc = DWHC_FROM_THIS (This);
+
+    if ((MaxSpeed == NULL) || (PortNumber == NULL) || (Is64BitCapable == NULL)) {
+        return EFI_INVALID_PARAMETER;
+    }
+
+	if (DwHc->AtFullSpeed)
+	{
+		*MaxSpeed = EFI_USB_SPEED_FULL;
+	}
+	else
+	{
+		*MaxSpeed = EFI_USB_SPEED_HIGH;
+	}
+    *PortNumber = 1;
+    *Is64BitCapable = 1;
+
+    return EFI_SUCCESS;
+}
+
+EFI_STATUS
+EFIAPI
+DwHcReset (
+    IN EFI_USB2_HC_PROTOCOL *This,
+    IN UINT16               Attributes
+    )
+{
+    DWUSB_OTGHC_DEV *DwHc;
+    DEBUG ((EFI_D_ERROR, "Designware HostController Reset\n"));
+
+    DwHc = DWHC_FROM_THIS (This);
+
+    ConfigureUsbPhy ();
+    DwCoreInit(DwHc);
+    DwHcInit(DwHc);
+
+    MmioAndThenOr32 (DwHc->DwUsbBase + HPRT0,
+                     ~(DWC2_HPRT0_PRTENA | DWC2_HPRT0_PRTCONNDET |
+                       DWC2_HPRT0_PRTENCHNG | DWC2_HPRT0_PRTOVRCURRCHNG),
+                     DWC2_HPRT0_PRTRST);
+
+    MicroSecondDelay (50000);
+
+    MmioAnd32 (DwHc->DwUsbBase + HPRT0, ~(DWC2_HPRT0_PRTENA | DWC2_HPRT0_PRTCONNDET |
+                                          DWC2_HPRT0_PRTENCHNG | DWC2_HPRT0_PRTOVRCURRCHNG |
+                                          DWC2_HPRT0_PRTRST));
+
+    return EFI_SUCCESS;
+}
+
+EFI_STATUS
+EFIAPI
+DwHcGetState (
+    IN   EFI_USB2_HC_PROTOCOL  *This,
+    OUT  EFI_USB_HC_STATE      *State
+    )
+{
+    DWUSB_OTGHC_DEV *DwHc;
+
+    DEBUG ((EFI_D_VERBOSE, "GetState \n",__func__));
+
+    DwHc = DWHC_FROM_THIS (This);
+
+    *State = DwHc->DwHcState;
+
+    return EFI_SUCCESS;
+}
+
+EFI_STATUS
+EFIAPI
+DwHcSetState (
+    IN EFI_USB2_HC_PROTOCOL *This,
+    IN EFI_USB_HC_STATE     State
+    )
+{
+    DWUSB_OTGHC_DEV *DwHc;
+    DEBUG ((EFI_D_VERBOSE, "DwHcSetState \n",__func__));
+
+    DwHc = DWHC_FROM_THIS (This);
+
+    DwHc->DwHcState = State;
+
+    return EFI_SUCCESS;
+}
+
+EFI_STATUS
+EFIAPI
+DwHcGetRootHubPortStatus (
+    IN   EFI_USB2_HC_PROTOCOL  *This,
+    IN   UINT8                 PortNumber,
+    OUT  EFI_USB_PORT_STATUS   *PortStatus
+    )
+{
+    DWUSB_OTGHC_DEV *DwHc;
+    UINT32    Hprt0;
+    static    int first = 1;
+//  DEBUG ((EFI_D_ERROR, "%s \n",L __func__));
+//    DEBUG ((EFI_D_ERROR, "GetPortStatus \n"));
+
+    if (first)
+    {
+        first = 0 ;
+		DEBUG ((EFI_D_ERROR, "DwHcReset first \n"));
+        DwHcReset(This,0);
+    }
+
+    if (PortNumber > DWC2_HC_CHANNEL)
+        return EFI_INVALID_PARAMETER;
+
+    if (PortStatus == NULL)
+        return EFI_INVALID_PARAMETER;
+
+    DwHc = DWHC_FROM_THIS (This);
+
+    PortStatus->PortStatus = 0;
+    PortStatus->PortChangeStatus = 0;
+
+    Hprt0 = MmioRead32 (DwHc->DwUsbBase + HPRT0);
+
+    if (Hprt0 & DWC2_HPRT0_PRTCONNSTS) {
+        PortStatus->PortStatus |= USB_PORT_STAT_CONNECTION;
+    }
+
+    if (Hprt0 & DWC2_HPRT0_PRTENA) {
+        PortStatus->PortStatus |= USB_PORT_STAT_ENABLE;
+    }
+
+    if (Hprt0 & DWC2_HPRT0_PRTSUSP) {
+        PortStatus->PortStatus |= USB_PORT_STAT_SUSPEND;
+    }
+
+    if (Hprt0 & DWC2_HPRT0_PRTOVRCURRACT) {
+        PortStatus->PortStatus |= USB_PORT_STAT_OVERCURRENT;
+    }
+
+    if (Hprt0 & DWC2_HPRT0_PRTRST) {
+        PortStatus->PortStatus |= USB_PORT_STAT_RESET;
+    }
+
+    if (Hprt0 & DWC2_HPRT0_PRTPWR) {
+        PortStatus->PortStatus |= USB_PORT_STAT_POWER;
+    }
+
+	if (!DwHc->AtFullSpeed)
+	{
+		PortStatus->PortStatus |= USB_PORT_STAT_HIGH_SPEED;
+	}
+
+    if (Hprt0 & DWC2_HPRT0_PRTENCHNG) {
+//    PortStatus->PortChangeStatus |= USB_PORT_STAT_C_ENABLE;
+    }
+
+    if (Hprt0 & DWC2_HPRT0_PRTCONNDET) {
+        PortStatus->PortChangeStatus |= USB_PORT_STAT_C_CONNECTION;
+    }
+
+    if (Hprt0 & DWC2_HPRT0_PRTOVRCURRCHNG) {
+        PortStatus->PortChangeStatus |= USB_PORT_STAT_C_OVERCURRENT;
+    }
+
+//  DEBUG ((EFI_D_ERROR, "GetPortStatus %X %X\n",PortStatus->PortStatus,PortStatus->PortChangeStatus));
+
+    return EFI_SUCCESS;
+}
+
+EFI_STATUS
+EFIAPI
+DwHcSetRootHubPortFeature (
+    IN  EFI_USB2_HC_PROTOCOL  *This,
+    IN  UINT8                 PortNumber,
+    IN  EFI_USB_PORT_FEATURE  PortFeature
+    )
+{
+    DWUSB_OTGHC_DEV   *DwHc;
+    UINT32      Hprt0;
+    EFI_STATUS    Status = EFI_SUCCESS;
+
+    DEBUG ((EFI_D_ERROR, "DwHcSetRootHubPortFeature \n"));
+
+    if (PortNumber > DWC2_HC_CHANNEL) {
+        Status = EFI_INVALID_PARAMETER;
+        goto End;
+    }
+
+    DwHc = DWHC_FROM_THIS (This);
+
+    switch (PortFeature) {
+        case EfiUsbPortEnable:
+            break;
+        case EfiUsbPortSuspend:
+            Hprt0 = MmioRead32 (DwHc->DwUsbBase + HPRT0);
+            Hprt0 &= ~(DWC2_HPRT0_PRTENA | DWC2_HPRT0_PRTCONNDET |
+                       DWC2_HPRT0_PRTENCHNG | DWC2_HPRT0_PRTOVRCURRCHNG);
+            Hprt0 |= DWC2_HPRT0_PRTSUSP;
+            MmioWrite32 (DwHc->DwUsbBase + HPRT0, Hprt0);
+            break;
+        case EfiUsbPortReset:
+            MmioAndThenOr32 (DwHc->DwUsbBase + HPRT0,
+                             ~(DWC2_HPRT0_PRTENA | DWC2_HPRT0_PRTCONNDET |
+                               DWC2_HPRT0_PRTENCHNG | DWC2_HPRT0_PRTOVRCURRCHNG),
+                             DWC2_HPRT0_PRTRST);
+            MicroSecondDelay (50000);
+            MmioAnd32 (DwHc->DwUsbBase + HPRT0, ~DWC2_HPRT0_PRTRST);
+            break;
+        case EfiUsbPortPower:
+            Hprt0 = MmioRead32 (DwHc->DwUsbBase + HPRT0);
+            Hprt0 &= ~(DWC2_HPRT0_PRTENA | DWC2_HPRT0_PRTCONNDET |
+                       DWC2_HPRT0_PRTENCHNG | DWC2_HPRT0_PRTOVRCURRCHNG);
+            Hprt0 |= DWC2_HPRT0_PRTPWR;
+            MmioWrite32 (DwHc->DwUsbBase + HPRT0, Hprt0);
+            break;
+        case EfiUsbPortOwner:
+            break;
+        default:
+            Status = EFI_INVALID_PARAMETER;
+            break;
+    }
+
+  End:
+    return Status;
+}
+
+EFI_STATUS
+EFIAPI
+DwHcClearRootHubPortFeature (
+    IN  EFI_USB2_HC_PROTOCOL  *This,
+    IN  UINT8                 PortNumber,
+    IN  EFI_USB_PORT_FEATURE  PortFeature
+    )
+{
+    DWUSB_OTGHC_DEV   *DwHc;
+    UINT32      Hprt0;
+    EFI_STATUS    Status = EFI_SUCCESS;
+
+    DEBUG ((EFI_D_ERROR, "DwHcClearRootHubPortFeature \n"));
+
+    if (PortNumber > DWC2_HC_CHANNEL) {
+        Status = EFI_INVALID_PARAMETER;
+        goto End;
+    }
+
+    DwHc = DWHC_FROM_THIS (This);
+
+    switch (PortFeature) {
+        case EfiUsbPortEnable:
+            Hprt0 = MmioRead32 (DwHc->DwUsbBase + HPRT0);
+            Hprt0 &= ~(DWC2_HPRT0_PRTENA | DWC2_HPRT0_PRTCONNDET |
+                       DWC2_HPRT0_PRTENCHNG | DWC2_HPRT0_PRTOVRCURRCHNG);
+            Hprt0 |= DWC2_HPRT0_PRTENA;
+            MmioWrite32 (DwHc->DwUsbBase + HPRT0, Hprt0);
+            break;
+        case EfiUsbPortReset:
+            MmioAndThenOr32 (DwHc->DwUsbBase + HPRT0,
+                             ~(DWC2_HPRT0_PRTENA | DWC2_HPRT0_PRTCONNDET |
+                               DWC2_HPRT0_PRTENCHNG | DWC2_HPRT0_PRTOVRCURRCHNG),
+                             DWC2_HPRT0_PRTRST);
+            MicroSecondDelay (50000);
+            MmioAnd32 (DwHc->DwUsbBase + HPRT0, ~DWC2_HPRT0_PRTRST);
+            break;
+        case EfiUsbPortSuspend:
+            MmioWrite32 (DwHc->DwUsbBase + PCGCCTL, 0);
+            MicroSecondDelay (40000);
+            Hprt0 = MmioRead32 (DwHc->DwUsbBase + HPRT0);
+            Hprt0 &= ~(DWC2_HPRT0_PRTENA | DWC2_HPRT0_PRTCONNDET |
+                       DWC2_HPRT0_PRTENCHNG | DWC2_HPRT0_PRTOVRCURRCHNG);
+            Hprt0 |= DWC2_HPRT0_PRTRES;
+            MmioWrite32 (DwHc->DwUsbBase + HPRT0, Hprt0);
+            Hprt0 &= ~DWC2_HPRT0_PRTSUSP;
+            MicroSecondDelay (150000);
+            Hprt0 &= ~DWC2_HPRT0_PRTRES;
+            MmioWrite32 (DwHc->DwUsbBase + HPRT0, Hprt0);
+            break;
+        case EfiUsbPortPower:
+            Hprt0 = MmioRead32 (DwHc->DwUsbBase + HPRT0);
+            Hprt0 &= ~(DWC2_HPRT0_PRTENA | DWC2_HPRT0_PRTCONNDET |
+                       DWC2_HPRT0_PRTENCHNG | DWC2_HPRT0_PRTOVRCURRCHNG);
+            Hprt0 &= ~DWC2_HPRT0_PRTPWR;
+            MmioWrite32 (DwHc->DwUsbBase + HPRT0, Hprt0);
+            break;
+        case EfiUsbPortOwner:
+            break;
+        case EfiUsbPortConnectChange:
+            Hprt0 = MmioRead32 (DwHc->DwUsbBase + HPRT0);
+            Hprt0 &= ~DWC2_HPRT0_PRTCONNDET;
+            MmioWrite32 (DwHc->DwUsbBase + HPRT0, Hprt0);
+            break;
+        case EfiUsbPortResetChange:
+            break;
+        case EfiUsbPortEnableChange:
+            Hprt0 = MmioRead32 (DwHc->DwUsbBase + HPRT0);
+            Hprt0 &= ~DWC2_HPRT0_PRTENCHNG;
+            MmioWrite32 (DwHc->DwUsbBase + HPRT0, Hprt0);
+            break;
+        case EfiUsbPortSuspendChange:
+            break;
+        case EfiUsbPortOverCurrentChange:
+            Hprt0 = MmioRead32 (DwHc->DwUsbBase + HPRT0);
+            Hprt0 &= ~DWC2_HPRT0_PRTOVRCURRCHNG;
+            MmioWrite32 (DwHc->DwUsbBase + HPRT0, Hprt0);
+            break;
+        default:
+            Status = EFI_INVALID_PARAMETER;
+            break;
+    }
+
+  End:
+    return Status;
+}
+
+void DumpRequest(EFI_USB_DEVICE_REQUEST *Request)
+{
+	if (Request->RequestType & 0x80) {
+		DEBUG ((EFI_D_VERBOSE, "USB: RequestType %X -> Host\n",Request->RequestType));
+	}
+	else {
+		DEBUG ((EFI_D_VERBOSE, "USB: RequestType %X -> Device\n",Request->RequestType));
+	}
+	if (Request->RequestType & 0x60)  {
+		DEBUG ((EFI_D_VERBOSE, "USB:                -> CLS/VEND\n"));
+	}
+	else  {
+		DEBUG ((EFI_D_VERBOSE, "USB:                -> STD\n"));
+	}
+	switch (Request->RequestType & 0x03)  {
+		case USB_TARGET_DEVICE:
+			DEBUG ((EFI_D_VERBOSE, "USB:                -> DEVICE\n"));
+			break;
+		case USB_TARGET_INTERFACE:
+			DEBUG ((EFI_D_VERBOSE, "USB:                -> ITERFACE\n"));
+			break;
+		case USB_TARGET_ENDPOINT:
+			DEBUG ((EFI_D_VERBOSE, "USB:                -> ENDPOINT\n"));
+			break;
+		case USB_TARGET_OTHER:
+			DEBUG ((EFI_D_VERBOSE, "USB:                -> OTHER\n"));
+			break;
+	}
+	DEBUG ((EFI_D_VERBOSE, "USB: RequestType 0x%X\n",Request->RequestType));
+	switch (Request->Request) {
+		case USB_DEV_GET_STATUS:
+			DEBUG ((EFI_D_VERBOSE, "USB:             GET STATUS\n"));
+			break;
+		case USB_DEV_CLEAR_FEATURE:
+			DEBUG ((EFI_D_VERBOSE, "USB:             CLEAR FEATURE\n"));
+			break;
+		case USB_DEV_SET_FEATURE:
+			DEBUG ((EFI_D_VERBOSE, "USB:             SET FEATURE\n"));
+			break;
+		case USB_DEV_SET_ADDRESS:
+			DEBUG ((EFI_D_VERBOSE, "USB:             SET ADDRESS\n"));
+			break;
+		case USB_DEV_GET_DESCRIPTOR:
+			DEBUG ((EFI_D_VERBOSE, "USB:             GET DESCRIPTOR\n"));
+			break;
+		case USB_DEV_SET_DESCRIPTOR:
+			DEBUG ((EFI_D_VERBOSE, "USB:             SET DESCRIPTOR\n"));
+			break;
+		default:
+			break;
+	}
+	DEBUG ((EFI_D_VERBOSE, "USB: Request     %d\n",Request->Request));
+	DEBUG ((EFI_D_VERBOSE, "USB: Value       0x%X\n",Request->Value));
+	DEBUG ((EFI_D_VERBOSE, "USB: Index       0x%X\n",Request->Index));
+	DEBUG ((EFI_D_VERBOSE, "USB: Length      %d\n",Request->Length));
+}
+
+
+EFI_STATUS
+EFIAPI
+DwHcControlTransfer (
+    IN  EFI_USB2_HC_PROTOCOL                *This,
+    IN  UINT8                               DeviceAddress,
+    IN  UINT8                               DeviceSpeed,
+    IN  UINTN                               MaximumPacketLength,
+    IN  EFI_USB_DEVICE_REQUEST              *Request,
+    IN  EFI_USB_DATA_DIRECTION              TransferDirection,
+    IN  OUT VOID                            *Data,
+    IN  OUT UINTN                           *DataLength,
+    IN  UINTN                               TimeOut,
+    IN  EFI_USB2_HC_TRANSACTION_TRANSLATOR  *Translator,
+    OUT UINT32                              *TransferResult
+    )
+{
+    DWUSB_OTGHC_DEV   *DwHc;
+    EFI_STATUS    Status;
+    UINT32      Pid;
+    UINTN     Length;
+    EFI_USB_DATA_DIRECTION  StatusDirection;
+    UINT32      Direction;
+	UINT8				*StatusBuffer;
+	EFI_TPL   OriginalTPL;				
+
+    DEBUG ((EFI_D_VERBOSE, "DwHcControlTranfer \n"));
+    DumpRequest(Request);
+
+    if ((Request == NULL) || (TransferResult == NULL)) {
+        return EFI_INVALID_PARAMETER;
+    }
+
+    if ((TransferDirection != EfiUsbDataIn) &&
+        (TransferDirection != EfiUsbDataOut) &&
+        (TransferDirection != EfiUsbNoData)) {
+        return EFI_INVALID_PARAMETER;
+    }
+
+    if ((TransferDirection == EfiUsbNoData) &&
+        ((Data != NULL) || (*DataLength != 0))) {
+        return EFI_INVALID_PARAMETER;
+    }
+
+    if ((TransferDirection != EfiUsbNoData) &&
+        ((Data == NULL) || (*DataLength == 0))) {
+        return EFI_INVALID_PARAMETER;
+    }
+
+    if ((MaximumPacketLength != 8) && (MaximumPacketLength != 16) &&
+        (MaximumPacketLength != 32) && (MaximumPacketLength != 64)) {
+        return EFI_INVALID_PARAMETER;
+    }
+
+    if ((DeviceSpeed == EFI_USB_SPEED_LOW) && (MaximumPacketLength != 8)) {
+        return EFI_INVALID_PARAMETER;
+    }
+
+    DwHc  = DWHC_FROM_THIS(This);
+
+	OriginalTPL = gBS->RaiseTPL(TPL_HIGH_LEVEL);
+	DwHc->BulkActive=POLL_DELAY;
+	gBS->RestoreTPL (OriginalTPL);
+
+    *TransferResult = EFI_USB_ERR_SYSTEM;
+    Status    = EFI_DEVICE_ERROR;
+
+    Pid = DWC2_HC_PID_SETUP;
+    Length = 8;
+    Status = DwHcTransfer (DwHc, DeviceAddress, MaximumPacketLength, &Pid, 0, Request, &Length,
+                           0, DWC2_HCCHAR_EPTYPE_CONTROL, TransferResult, 1, 0, DeviceSpeed, 
+						   Translator->TranslatorPortNumber, Translator->TranslatorHubAddress, 0, TimeOut);
+
+    if (EFI_ERROR(Status)) {
+        DEBUG ((EFI_D_ERROR, "DwHcControlTransfer: Setup Stage Error\n"));
+		if ((DeviceSpeed != EFI_USB_SPEED_HIGH) && (DwHc->AtFullSpeed == 0))
+		{
+			DEBUG ((EFI_D_ERROR, "DwHcControlTransfer: Split transaction failed, reducing bus speed\n"));
+			DwHc->AtFullSpeed = 1;
+			DwHcReset(This, 0);
+		}
+		Status = EFI_USB_ERR_SYSTEM;
+        goto EXIT;
+    }
+
+    if (Data) {
+        Pid = DWC2_HC_PID_DATA1;
+
+        if (TransferDirection == EfiUsbDataIn)
+            Direction = 1;
+        else
+            Direction = 0;
+
+        Status = DwHcTransfer (DwHc, DeviceAddress, MaximumPacketLength, &Pid, Direction,
+                               Data, DataLength, 0, DWC2_HCCHAR_EPTYPE_CONTROL, TransferResult, 0, 0, DeviceSpeed, 
+							   Translator->TranslatorPortNumber, Translator->TranslatorHubAddress, 0, TimeOut);
+
+        if (EFI_ERROR(Status)) {
+            DEBUG ((EFI_D_ERROR, "DwHcControlTransfer: Data Stage Error\n"));
+            goto EXIT;
+        }
+    }
+
+    if ((TransferDirection == EfiUsbDataOut) || (TransferDirection == EfiUsbNoData))
+        StatusDirection = 1;
+    else
+        StatusDirection = 0;
+
+    Pid = DWC2_HC_PID_DATA1;
+    Length = 0;
+
+    StatusBuffer = UncachedAllocatePages (EFI_SIZE_TO_PAGES (DWC2_STATUS_BUF_SIZE));
+    if (StatusBuffer == NULL) {
+        DEBUG ((EFI_D_ERROR, "CreateDwUsbHc: No page availablefor StatusBuffer\n"));
+		goto EXIT;
+    }
+
+    Status = DwHcTransfer (DwHc, DeviceAddress, MaximumPacketLength, &Pid, StatusDirection, StatusBuffer,
+                           &Length, 0, DWC2_HCCHAR_EPTYPE_CONTROL, TransferResult, 0, 0, DeviceSpeed,
+						   Translator->TranslatorPortNumber, Translator->TranslatorHubAddress, 0, TimeOut);
+
+    UncachedFreePages (StatusBuffer, EFI_SIZE_TO_PAGES (DWC2_STATUS_BUF_SIZE));
+    if (EFI_ERROR(Status)) {
+        DEBUG ((EFI_D_ERROR, "DwHcControlTransfer: Status Stage Error\n"));
+    }
+
+  EXIT:
+    return Status;
+}
+
+EFI_STATUS
+EFIAPI
+DwHcBulkTransfer (
+    IN  EFI_USB2_HC_PROTOCOL                *This,
+    IN  UINT8                               DeviceAddress,
+    IN  UINT8                               EndPointAddress,
+    IN  UINT8                               DeviceSpeed,
+    IN  UINTN                               MaximumPacketLength,
+    IN  UINT8                               DataBuffersNumber,
+    IN  OUT VOID                            *Data[EFI_USB_MAX_BULK_BUFFER_NUM],
+    IN  OUT UINTN                           *DataLength,
+    IN  OUT UINT8                           *DataToggle,
+    IN  UINTN                               TimeOut,
+    IN  EFI_USB2_HC_TRANSACTION_TRANSLATOR  *Translator,
+    OUT UINT32                              *TransferResult
+    )
+{
+    DWUSB_OTGHC_DEV   *DwHc;
+    EFI_STATUS    Status;
+    UINT8     TransferDirection;
+    UINT8     EpAddress;
+    UINT32      Pid;
+    UINT8     Ping;
+	EFI_TPL   OriginalTPL;				
+
+    DEBUG ((EFI_D_VERBOSE, "DwHcBulkTransfer DEV=%X EP=%X LEN=%X \n",DeviceAddress,EndPointAddress,*DataLength));
+    if ((Data == NULL) || (Data[0] == NULL) ||
+        (DataLength == NULL) || (*DataLength == 0) ||
+        (TransferResult == NULL)) {
+        return EFI_INVALID_PARAMETER;
+    }
+
+    if ((*DataToggle != 0) && (*DataToggle != 1))
+        return EFI_INVALID_PARAMETER;
+
+    if ((DeviceSpeed == EFI_USB_SPEED_LOW) || (DeviceSpeed == EFI_USB_SPEED_SUPER))
+        return EFI_INVALID_PARAMETER;
+
+    if (((DeviceSpeed == EFI_USB_SPEED_FULL) && (MaximumPacketLength > 64)) ||
+        ((DeviceSpeed == EFI_USB_SPEED_HIGH) && (MaximumPacketLength > 512)))
+        return EFI_INVALID_PARAMETER;
+
+    DwHc = DWHC_FROM_THIS (This);
+
+    *TransferResult   = EFI_USB_ERR_SYSTEM;
+    Status      = EFI_DEVICE_ERROR;
+    TransferDirection = (EndPointAddress >> 7) & 0x01; //IN = 1, OUT = 0
+    EpAddress   = EndPointAddress & 0x0F;
+    Pid     = (*DataToggle << 1);
+    Ping    = 0;
+//    Ping    = TransferDirection; //for write do ping first
+
+	OriginalTPL = gBS->RaiseTPL(TPL_HIGH_LEVEL);
+	DwHc->BulkActive=POLL_DELAY;
+	gBS->RestoreTPL (OriginalTPL);
+
+    Status = DwHcTransfer (DwHc, DeviceAddress, MaximumPacketLength, &Pid, TransferDirection, Data[0], DataLength,
+                           EpAddress, DWC2_HCCHAR_EPTYPE_BULK, TransferResult, 1, Ping, DeviceSpeed,
+						   Translator->TranslatorPortNumber, Translator->TranslatorHubAddress, 0, TimeOut);
+
+    *DataToggle = (Pid >> 1);
+
+//    MicroSecondDelay (5000);
+//	DwHc->BulkActive=POLL_DELAY;
+
+    return Status;
+}
+
+EFI_STATUS
+EFIAPI
+DwHcAsyncInterruptTransfer (
+    IN  EFI_USB2_HC_PROTOCOL                  *This,
+    IN  UINT8                                 DeviceAddress,
+    IN  UINT8                                 EndPointAddress,
+    IN  UINT8                                 DeviceSpeed,
+    IN  UINTN                                 MaximumPacketLength,
+    IN  BOOLEAN                               IsNewTransfer,
+    IN  OUT UINT8                             *DataToggle,
+    IN  UINTN                                 PollingInterval,
+    IN  UINTN                                 DataLength,
+    IN  EFI_USB2_HC_TRANSACTION_TRANSLATOR    *Translator,
+    IN  EFI_ASYNC_USB_TRANSFER_CALLBACK       CallBackFunction,
+    IN  VOID                                  *Context OPTIONAL
+    )
+{
+    DWUSB_OTGHC_DEV       *DwHc;
+    EFI_STATUS            Status;
+	EFI_TPL               OriginalTPL;				
+	DWUSB_INTERRUPT_QUEUE *CompletionEntry;
+    DEBUG ((EFI_D_VERBOSE, "DwHcAsyncInterruptTransfer Addr=%d, EP=%d len=%d new=%d Interval=%d(%d)\n",DeviceAddress, EndPointAddress, DataLength, IsNewTransfer, PollingInterval, PollingInterval/DW_USB_POLL_TIMER));
+
+    if (!(EndPointAddress & USB_ENDPOINT_DIR_IN)) {
+        DEBUG ((EFI_D_ERROR, "DwHcAsyncInterruptTransfer: endpoint direction not right\n"));
+        return EFI_INVALID_PARAMETER;
+    }
+
+    DwHc = DWHC_FROM_THIS (This);
+
+    if (IsNewTransfer) {
+        if (DataLength == 0) {
+            DEBUG ((EFI_D_ERROR, "DwHcAsyncInterruptTransfer: invalid len\n"));
+            return EFI_INVALID_PARAMETER;
+        }
+
+        if ((*DataToggle != 1) && (*DataToggle != 0)) {
+            DEBUG ((EFI_D_ERROR, "DwHcAsyncInterruptTransfer: invalid datatoggle\n"));
+            return EFI_INVALID_PARAMETER;
+        }
+
+        if ((PollingInterval > 255) || (PollingInterval < 1)) {
+            DEBUG ((EFI_D_ERROR, "DwHcAsyncInterruptTransfer: Invalid polling interval\n"));
+            return EFI_INVALID_PARAMETER;
+        }
+    }
+	else {
+		// The async nature of this callback is bonkers with
+		// relation to how it should work. So we do all the 
+		// "scheduled" processing in the foreground and then
+		// just queue the results..
+		OriginalTPL = gBS->RaiseTPL(TPL_HIGH_LEVEL);
+		// Which means we want to cancel any outstanding items here..
+		CompletionEntry = DwHc->InterruptQueue;
+		while (CompletionEntry) {
+			if ((CompletionEntry->DeviceAddress == DeviceAddress) && (CompletionEntry->EndPointAddress == EndPointAddress))	{
+				CompletionEntry->Cancel = 1;
+			}
+			CompletionEntry = CompletionEntry->Next;
+		}
+		gBS->RestoreTPL (OriginalTPL);
+		return EFI_SUCCESS;
+	}
+
+    CompletionEntry = AllocateZeroPool (sizeof(DWUSB_INTERRUPT_QUEUE));
+	if (CompletionEntry == NULL)	{
+		DEBUG ((EFI_D_ERROR, "DwHcAsyncInterruptTransfer: failed to allocate buffer\n"));
+        Status = EFI_OUT_OF_RESOURCES;
+        goto EXIT;
+	}
+
+    CompletionEntry->Data = AllocateZeroPool (DataLength);
+    if (CompletionEntry->Data == NULL) {
+		FreePool(CompletionEntry);
+		DEBUG ((EFI_D_ERROR, "DwHcAsyncInterruptTransfer: failed to allocate buffer\n"));
+        Status = EFI_OUT_OF_RESOURCES;
+        goto EXIT;     
+    }
+
+	CompletionEntry->CallBackFunction = CallBackFunction;
+	CompletionEntry->DataLength = DataLength;
+	CompletionEntry->Context = Context;
+	CompletionEntry->TransferResult = EFI_USB_NOERROR;
+	CompletionEntry->DeviceAddress = DeviceAddress;
+	CompletionEntry->EndPointAddress = EndPointAddress;
+	CompletionEntry->Cancel = 0;
+	CompletionEntry->This = This;
+	CompletionEntry->DeviceSpeed = DeviceSpeed;
+	CompletionEntry->MaximumPacketLength = MaximumPacketLength;
+	CompletionEntry->Translator = Translator;
+	if (PollingInterval > DW_USB_POLL_TIMER) {
+		CompletionEntry->TicksBeforeActive = (PollingInterval/DW_USB_POLL_TIMER);
+	} else {
+		CompletionEntry->TicksBeforeActive = 1;
+	}
+	CompletionEntry->Ticks = -1;
+
+    Status      = EFI_SUCCESS;
+
+	CompletionEntry->DataToggle = *DataToggle;
+
+	DEBUG ((EFI_D_VERBOSE, "DwHcAsyncInterruptTransfer: Save off results of interrupt transfer\n"));
+	// queue the result to be reported on the timer
+	OriginalTPL = gBS->RaiseTPL(TPL_HIGH_LEVEL);
+	CompletionEntry->Next = DwHc->InterruptQueue;
+	DwHc->InterruptQueue = CompletionEntry;
+	gBS->RestoreTPL (OriginalTPL);
+
+
+
+  EXIT:
+    return Status;
+}
+
+EFI_STATUS
+EFIAPI
+DwHcSyncInterruptTransfer (
+    IN  EFI_USB2_HC_PROTOCOL                *This,
+    IN  UINT8                               DeviceAddress,
+    IN  UINT8                               EndPointAddress,
+    IN  UINT8                               DeviceSpeed,
+    IN  UINTN                               MaximumPacketLength,
+    IN  OUT VOID                            *Data,
+    IN  OUT UINTN                           *DataLength,
+    IN  OUT UINT8                           *DataToggle,
+    IN  UINTN                               TimeOut,
+    IN  EFI_USB2_HC_TRANSACTION_TRANSLATOR  *Translator,
+    OUT UINT32                              *TransferResult
+    )
+{
+    DEBUG ((EFI_D_ERROR, "DwHcSyncInterruptTransfer Not Supported\n",__func__));
+    return EFI_UNSUPPORTED;
+}
+
+EFI_STATUS
+EFIAPI
+DwHcIsochronousTransfer (
+    IN  EFI_USB2_HC_PROTOCOL                *This,
+    IN  UINT8                               DeviceAddress,
+    IN  UINT8                               EndPointAddress,
+    IN  UINT8                               DeviceSpeed,
+    IN  UINTN                               MaximumPacketLength,
+    IN  UINT8                               DataBuffersNumber,
+    IN  OUT VOID                            *Data[EFI_USB_MAX_ISO_BUFFER_NUM],
+    IN  UINTN                               DataLength,
+    IN  EFI_USB2_HC_TRANSACTION_TRANSLATOR  *Translator,
+    OUT UINT32                              *TransferResult
+    )
+{
+    DEBUG ((EFI_D_ERROR, "DwHcIsochronousTransfer Not Supported\n",__func__));
+    return EFI_UNSUPPORTED;
+}
+
+EFI_STATUS
+EFIAPI
+DwHcAsyncIsochronousTransfer (
+    IN  EFI_USB2_HC_PROTOCOL                *This,
+    IN  UINT8                               DeviceAddress,
+    IN  UINT8                               EndPointAddress,
+    IN  UINT8                               DeviceSpeed,
+    IN  UINTN                               MaximumPacketLength,
+    IN  UINT8                               DataBuffersNumber,
+    IN  OUT VOID                            *Data[EFI_USB_MAX_ISO_BUFFER_NUM],
+    IN  UINTN                               DataLength,
+    IN  EFI_USB2_HC_TRANSACTION_TRANSLATOR  *Translator,
+    IN  EFI_ASYNC_USB_TRANSFER_CALLBACK     IsochronousCallBack,
+    IN  VOID                                *Context
+    )
+{
+    DEBUG ((EFI_D_ERROR, "DwHcAsyncIsochronousTransfer Not Supported\n",__func__));
+    return EFI_UNSUPPORTED;
+}
+
+/**
+   Supported Functions
+**/
+
+VOID
+InitFslspClkSel (
+    IN DWUSB_OTGHC_DEV *DwHc
+    )
+{
+    UINT32  PhyClk;
+    DEBUG ((EFI_D_VERBOSE, "InitFslspClkSel \n",__func__));
+    PhyClk = DWC2_HCFG_FSLSPCLKSEL_30_60_MHZ;
+
+    MmioAndThenOr32 (DwHc->DwUsbBase + HCFG,
+                     ~DWC2_HCFG_FSLSPCLKSEL_MASK,
+                     PhyClk << DWC2_HCFG_FSLSPCLKSEL_OFFSET);
+	if (DwHc->AtFullSpeed)
+	{
+		MmioAndThenOr32 (DwHc->DwUsbBase + HCFG,
+						 ~DWC2_HCFG_FSLSSUPP,
+						 DWC2_HCFG_FSLSSUPP);
+	}
+}		
+
+
+/**
+
+   Timer to submit periodic interrupt transfer, and invoke callbacks
+
+   @param  Event                 Event handle
+   @param  Context               Device private data
+
+**/
+
+VOID
+EFIAPI
+DwHcTimerCallback (
+	IN  EFI_EVENT           Event,
+	IN  VOID                *Context
+	)
+{
+	DWUSB_OTGHC_DEV *DwHc = (DWUSB_OTGHC_DEV *) Context;
+	EFI_TPL                  OriginalTPL;
+	DWUSB_INTERRUPT_QUEUE    *CompletionEntry;
+	DWUSB_INTERRUPT_QUEUE    *CompletionNext;
+	UINT32                   ret = 0;
+
+	OriginalTPL = gBS->RaiseTPL(TPL_HIGH_LEVEL);
+	if (DwHc->BulkActive>0) {
+		// This is a gentle hack 
+		// to avoid colliding requests
+		// for now.
+		DwHc->BulkActive--;
+		ret = 1;
+	}
+	gBS->RestoreTPL (OriginalTPL);
+
+	if (ret)
+		return;
+
+//	DEBUG ((EFI_D_ERROR, "DwHcTimerCallback TPL=%dn\n",OriginalTPL));
+
+	// pick off all queued items.
+	OriginalTPL = gBS->RaiseTPL(TPL_HIGH_LEVEL);
+	CompletionNext = DwHc->InterruptQueue;
+	//DwHc->InterruptQueue = NULL;
+	gBS->RestoreTPL (OriginalTPL);
+
+	// perform callbacks on queued interrupt status
+	while (CompletionNext)	{
+		DEBUG ((EFI_D_VERBOSE, "DwHcTimerCallbackn\n"));
+		CompletionEntry = CompletionNext;
+		CompletionNext = CompletionEntry->Next;
+		CompletionEntry->Ticks++;
+		if ((CompletionEntry->CallBackFunction) && ( CompletionEntry->Cancel == 0 ) && (CompletionEntry->Ticks > CompletionEntry->TicksBeforeActive))
+		{
+			UINT32        Pid;
+			UINT8         TransferDirection;
+			UINT8         EpAddress;
+			EFI_STATUS    Status;
+			EFI_USB2_HC_TRANSACTION_TRANSLATOR    *Translator = CompletionEntry->Translator;
+			UINTN         DataLength;
+			UINT32        Timeout = DW_USB_POLL_INTERRUPT;
+			
+			if ( CompletionEntry->DeviceAddress == 1 )
+			{
+				// fast timeouts on first hub port
+				Timeout = 10;
+				DEBUG ((EFI_D_VERBOSE, "DwHcTimerCallbackn Reset timer for addr1\n"));
+			}
+
+			// ok execute thie
+			EpAddress   = CompletionEntry->EndPointAddress & 0x0F;
+			TransferDirection = (CompletionEntry->EndPointAddress >> 7) & 0x01;
+								
+			Pid         = CompletionEntry->DataToggle;
+			DataLength  = CompletionEntry->DataLength;
+				
+			DEBUG ((EFI_D_VERBOSE, "DwHcTimerCallback message to  addr=%d, EP=%d Pid=%d\n",CompletionEntry->DeviceAddress, EpAddress, Pid));
+
+			Status = DwHcTransfer (DwHc, CompletionEntry->DeviceAddress, CompletionEntry->MaximumPacketLength, &Pid, TransferDirection, 
+								   CompletionEntry->Data, &DataLength,
+								   EpAddress, DWC2_HCCHAR_EPTYPE_INTR, &CompletionEntry->TransferResult, 1, 0, CompletionEntry->DeviceSpeed,
+								   Translator->TranslatorPortNumber, Translator->TranslatorHubAddress, 1, Timeout);
+
+			DEBUG ((EFI_D_VERBOSE, "DwHcTimerCallback Pid=%d\n", Pid));
+			if (EFI_ERROR(Status))
+			{
+				//DEBUG ((EFI_D_ERROR, "Consider canceling the transaction here?\n"));
+				if (CompletionEntry->TransferResult == EFI_USB_ERR_NAK ) {
+					// NAK's are still successful transmission
+					// particularly for interrupt transfers
+					Status = EFI_USB_NOERROR;
+				}
+
+				if (CompletionEntry->TransferResult == (EFI_USB_ERR_SYSTEM+1) ) {
+					// overruns may still have data, lets pass it on
+					Status = EFI_USB_NOERROR;
+					//DataLength = CompletionEntry->DataLength;
+					//CompletionEntry->TransferResult = EFI_USB_NOERROR;
+				}
+				if (CompletionEntry->TransferResult == EFI_USB_ERR_TIMEOUT)
+				{
+					// This actually appears to recovery everything correctly
+					// but does it really need recovery, or just a retry?
+					//DEBUG ((EFI_D_ERROR, "Doing full reset\n"));
+					// doing full reset
+					DwHcReset(CompletionEntry->This,0);
+				}
+
+			}
+				
+			CompletionEntry->DataToggle = Pid;
+			
+			// don't report NAK's and DATA Toggle errors, what the end user doesn't know won't kill them..
+			if ((CompletionEntry->TransferResult != EFI_USB_ERR_SYSTEM) && (CompletionEntry->TransferResult != EFI_USB_ERR_NAK )) {
+				CompletionEntry->CallBackFunction (CompletionEntry->Data, DataLength, CompletionEntry->Context, CompletionEntry->TransferResult);
+			}
+			CompletionEntry->Ticks = 0; //reset the ticks
+		}
+	}
+
+	{
+		// Nove canceled items to a cancel list
+		// and then delete all the entries on the canceled list
+		DWUSB_INTERRUPT_QUEUE *Canceled;
+		// now remove any canceled entries
+		OriginalTPL = gBS->RaiseTPL(TPL_HIGH_LEVEL);
+		CompletionNext = DwHc->InterruptQueue;
+		DwHc->InterruptQueue = NULL;
+		Canceled = NULL;
+		
+		while (CompletionNext)	{
+			
+			CompletionEntry = CompletionNext;
+			CompletionNext = CompletionEntry->Next;
+			if (CompletionEntry->Cancel)
+			{
+				// toss it on the canceled queue
+				CompletionEntry->Next = Canceled;
+				Canceled = CompletionEntry->Next;
+			}
+			else
+			{
+				// toss it back on the pending queue
+				CompletionEntry->Next = DwHc->InterruptQueue;
+				DwHc->InterruptQueue = CompletionEntry;
+			}
+		}
+		gBS->RestoreTPL (OriginalTPL);
+
+		while (Canceled)
+		{
+			DEBUG ((EFI_D_VERBOSE, "DwHcTimerCallback cancel\n"));
+			CompletionEntry = Canceled;
+			Canceled = CompletionEntry->Next;
+			FreePool(CompletionEntry->Data);
+			FreePool(CompletionEntry);
+		}
+	}
+
+}
+
+VOID
+DwHcInit (
+    IN DWUSB_OTGHC_DEV *DwHc
+    )
+{
+    UINT32 NpTxFifoSz = 0;
+    UINT32 pTxFifoSz = 0;
+    UINT32 Hprt0 = 0;
+    INT32  i, Status, NumChannels;
+    DEBUG ((EFI_D_VERBOSE, "HwHcInit \n",__func__));
+
+    MmioWrite32 (DwHc->DwUsbBase + PCGCCTL, 0);
+
+    InitFslspClkSel (DwHc);
+
+    MmioWrite32 (DwHc->DwUsbBase + GRXFSIZ, DWC2_HOST_RX_FIFO_SIZE);
+
+    NpTxFifoSz |= DWC2_HOST_NPERIO_TX_FIFO_SIZE << DWC2_FIFOSIZE_DEPTH_OFFSET;
+    NpTxFifoSz |= DWC2_HOST_RX_FIFO_SIZE << DWC2_FIFOSIZE_STARTADDR_OFFSET;
+    MmioWrite32 (DwHc->DwUsbBase + GNPTXFSIZ, NpTxFifoSz);
+
+    pTxFifoSz |= DWC2_HOST_PERIO_TX_FIFO_SIZE << DWC2_FIFOSIZE_DEPTH_OFFSET;
+    pTxFifoSz |= (DWC2_HOST_RX_FIFO_SIZE + DWC2_HOST_NPERIO_TX_FIFO_SIZE) <<
+        DWC2_FIFOSIZE_STARTADDR_OFFSET;
+    MmioWrite32 (DwHc->DwUsbBase + HPTXFSIZ, pTxFifoSz);
+
+    MmioAnd32 (DwHc->DwUsbBase + GOTGCTL, ~(DWC2_GOTGCTL_HSTSETHNPEN));
+
+    DwFlushTxFifo (DwHc, 0x10);
+    DwFlushRxFifo (DwHc);
+
+    NumChannels = MmioRead32 (DwHc->DwUsbBase + GHWCFG2);
+    NumChannels &= DWC2_HWCFG2_NUM_HOST_CHAN_MASK;
+    NumChannels >>= DWC2_HWCFG2_NUM_HOST_CHAN_OFFSET;
+    NumChannels += 1;
+
+    for (i=0; i<NumChannels; i++)
+        MmioAndThenOr32 (DwHc->DwUsbBase + HCCHAR(i),
+                         ~(DWC2_HCCHAR_CHEN | DWC2_HCCHAR_EPDIR),
+                         DWC2_HCCHAR_CHDIS);
+
+    for (i=0; i<NumChannels; i++) {
+        MmioAndThenOr32 (DwHc->DwUsbBase + HCCHAR(i),
+                         ~DWC2_HCCHAR_EPDIR,
+                         (DWC2_HCCHAR_CHEN | DWC2_HCCHAR_CHDIS));
+        Status = Wait4Bit (DwHc->DwUsbBase + HCCHAR(i), DWC2_HCCHAR_CHEN, 0);
+        if (Status)
+            DEBUG ((EFI_D_VERBOSE, "DwHcInit: Timeout!\n"));
+    }
+
+    if (MmioRead32 (DwHc->DwUsbBase + GINTSTS) & DWC2_GINTSTS_CURMODE_HOST) {
+        Hprt0 = MmioRead32 (DwHc->DwUsbBase + HPRT0);
+        Hprt0 &= ~(DWC2_HPRT0_PRTENA | DWC2_HPRT0_PRTCONNDET);
+        Hprt0 &= ~(DWC2_HPRT0_PRTENCHNG | DWC2_HPRT0_PRTOVRCURRCHNG);
+
+        if (!(Hprt0 & DWC2_HPRT0_PRTPWR)) {
+            Hprt0 |= DWC2_HPRT0_PRTPWR;
+            MmioWrite32 (DwHc->DwUsbBase + HPRT0, Hprt0);
+        }
+    }
+}
+
+VOID
+DwCoreInit (
+    IN DWUSB_OTGHC_DEV *DwHc
+    )
+{
+    UINT32    AhbCfg = 0;
+    UINT32    UsbCfg = 0;
+    DEBUG ((EFI_D_VERBOSE, "DwCoreInit \n"));
+
+    UsbCfg = MmioRead32 (DwHc->DwUsbBase + GUSBCFG);
+
+    UsbCfg |= DWC2_GUSBCFG_ULPI_EXT_VBUS_DRV;
+    UsbCfg &= ~DWC2_GUSBCFG_TERM_SEL_DL_PULSE;
+
+    MmioWrite32 (DwHc->DwUsbBase + GUSBCFG, UsbCfg);
+
+    DwCoreReset (DwHc);
+
+    UsbCfg &= ~(DWC2_GUSBCFG_ULPI_UTMI_SEL | DWC2_GUSBCFG_PHYIF);
+    UsbCfg |= CONFIG_DWC2_PHY_TYPE << DWC2_GUSBCFG_ULPI_UTMI_SEL_OFFSET;
+
+    UsbCfg &= ~DWC2_GUSBCFG_DDRSEL;
+
+    MmioWrite32 (DwHc->DwUsbBase + GUSBCFG, UsbCfg);
+
+    DwCoreReset (DwHc);
+
+    UsbCfg = MmioRead32 (DwHc->DwUsbBase + GUSBCFG);
+    UsbCfg &= ~(DWC2_GUSBCFG_ULPI_FSLS | DWC2_GUSBCFG_ULPI_CLK_SUS_M);
+	if (DW_FORCE_HOST) {
+		UsbCfg |= DWC2_GUSBCFG_FORCEHOSTMODE; 
+	}
+    UsbCfg &= ~(DWC2_GUSBCFG_HNPCAP | DWC2_GUSBCFG_SRPCAP); //disable host neg protocol and SRP
+    MmioWrite32 (DwHc->DwUsbBase + GUSBCFG, UsbCfg);
+
+    DEBUG ((EFI_D_ERROR, "DwCoreInit USB cfg %X\n",UsbCfg));
+
+    AhbCfg |= DWC2_GAHBCFG_HBURSTLEN_INCR4;
+    AhbCfg |= DWC2_GAHBCFG_DMAENABLE;
+
+    MmioWrite32 (DwHc->DwUsbBase + GAHBCFG, AhbCfg);
+//    MmioOr32 (DwHc->DwUsbBase + GUSBCFG, DWC2_GUSBCFG_HNPCAP | DWC2_GUSBCFG_SRPCAP); //enable host negotiation, and session request (not wanted for host mode)
+
+}
+
+DWUSB_OTGHC_DEV *
+CreateDwUsbHc (
+	IN EFI_PCI_IO_PROTOCOL  *PciIo
+    )
+{
+    DWUSB_OTGHC_DEV *DwHc;
+	UINT32  Channel;
+    DEBUG ((EFI_D_VERBOSE, "CreateDwUsbHc \n",__func__));
+
+    DwHc = AllocateZeroPool (sizeof(DWUSB_OTGHC_DEV));
+
+    if (DwHc == NULL) {
+        return NULL;
+    }
+
+    DwHc->Signature                                 = DWUSB_OTGHC_DEV_SIGNATURE;
+    DwHc->DwUsbOtgHc.GetCapability                  = DwHcGetCapability;
+    DwHc->DwUsbOtgHc.Reset                          = DwHcReset;
+    DwHc->DwUsbOtgHc.GetState                       = DwHcGetState;
+    DwHc->DwUsbOtgHc.SetState                       = DwHcSetState;
+    DwHc->DwUsbOtgHc.ControlTransfer                = DwHcControlTransfer;
+    DwHc->DwUsbOtgHc.BulkTransfer                   = DwHcBulkTransfer;
+    DwHc->DwUsbOtgHc.AsyncInterruptTransfer         = DwHcAsyncInterruptTransfer;
+    DwHc->DwUsbOtgHc.SyncInterruptTransfer          = DwHcSyncInterruptTransfer;
+    DwHc->DwUsbOtgHc.IsochronousTransfer            = DwHcIsochronousTransfer;
+    DwHc->DwUsbOtgHc.AsyncIsochronousTransfer       = DwHcAsyncIsochronousTransfer;
+    DwHc->DwUsbOtgHc.GetRootHubPortStatus           = DwHcGetRootHubPortStatus;
+    DwHc->DwUsbOtgHc.SetRootHubPortFeature          = DwHcSetRootHubPortFeature;
+    DwHc->DwUsbOtgHc.ClearRootHubPortFeature        = DwHcClearRootHubPortFeature;
+    DwHc->DwUsbOtgHc.MajorRevision                  = 0x02;
+    DwHc->DwUsbOtgHc.MinorRevision                  = 0x00;
+    DwHc->DwUsbBase         = FixedPcdGet32 (PcdDwUsbBaseAddress); //TODO remove this and convert to Pci->Mem.Read/Write() calls
+
+	DwHc->InterruptQueue = NULL;
+	DwHc->PciIo = PciIo;
+	DwHc->BulkActive = 0;
+	DwHc->AtFullSpeed = DW_AT_FULLSPEED;
+
+	for (Channel = 0 ; Channel < DWC2_MAX_CHANNELS; Channel++)
+	{
+		DwHc->ActiveChannel[Channel] = FALSE;
+	}
+
+
+    return DwHc;
+}
+
+VOID
+EFIAPI
+DwUsbHcExitBootService (
+    EFI_EVENT Event,
+    VOID    *Context
+    )
+{
+    DWUSB_OTGHC_DEV   *DwHc;
+	
+	DEBUG ((EFI_D_ERROR, "\n\n\nEXIT BOOT SERVICES!\n\n\n"));
+
+    DwHc = (DWUSB_OTGHC_DEV *) Context;
+
+    MmioAndThenOr32 (DwHc->DwUsbBase + HPRT0,
+                     ~(DWC2_HPRT0_PRTENA | DWC2_HPRT0_PRTCONNDET |
+                       DWC2_HPRT0_PRTENCHNG | DWC2_HPRT0_PRTOVRCURRCHNG),
+                     DWC2_HPRT0_PRTRST);
+
+    MicroSecondDelay (50000);
+
+    DwCoreReset (DwHc);
+}
+
+#pragma pack(1)
+typedef struct {
+	UINT8               ProgInterface;
+	UINT8               SubClassCode;
+	UINT8               BaseCode;
+} USB_CLASSC;
+#pragma pack()
+
+/**
+   Test to see if this driver supports ControllerHandle. Any
+   ControllerHandle that has Usb2HcProtocol installed will
+   be supported.
+
+   @param  This                 Protocol instance pointer.
+   @param  Controller           Handle of device to test.
+   @param  RemainingDevicePath  Not used.
+
+   @return EFI_SUCCESS          This driver supports this device.
+   @return EFI_UNSUPPORTED      This driver does not support this device.
+
+**/
+EFI_STATUS
+EFIAPI
+DwUsbDriverBindingSupported (
+	IN EFI_DRIVER_BINDING_PROTOCOL *This,
+	IN EFI_HANDLE                  Controller,
+	IN EFI_DEVICE_PATH_PROTOCOL    *RemainingDevicePath
+	)
+{
+	EFI_STATUS              Status;
+	EFI_PCI_IO_PROTOCOL     *PciIo;
+	USB_CLASSC              UsbClassCReg;
+
+	//
+	// Test whether there is PCI IO Protocol attached on the controller handle.
+	//
+	Status = gBS->OpenProtocol (
+		Controller,
+		&gEfiPciIoProtocolGuid,
+		(VOID **) &PciIo,
+		This->DriverBindingHandle,
+		Controller,
+		EFI_OPEN_PROTOCOL_BY_DRIVER
+		);
+
+	if (EFI_ERROR (Status)) {
+		return EFI_UNSUPPORTED;
+	}
+
+	Status = PciIo->Pci.Read (
+		PciIo,
+		EfiPciIoWidthUint8,
+		PCI_CLASSCODE_OFFSET,
+		sizeof (USB_CLASSC) / sizeof (UINT8),
+		&UsbClassCReg
+		);
+
+	if (EFI_ERROR (Status)) {
+		Status = EFI_UNSUPPORTED;
+		goto ON_EXIT;
+	}
+
+	//
+	// Test whether the controller belongs to Usb class type
+	//
+	if ((UsbClassCReg.BaseCode != PCI_CLASS_SERIAL) || (UsbClassCReg.SubClassCode != PCI_CLASS_SERIAL_USB)) {
+		Status = EFI_UNSUPPORTED;
+	}
+	else  {
+		DEBUG ((EFI_D_VERBOSE, "DwUsbDriverBindingSupported found board!\n"));
+	}
+
+  ON_EXIT:
+	gBS->CloseProtocol (
+		Controller,
+		&gEfiPciIoProtocolGuid,
+		This->DriverBindingHandle,
+		Controller
+		);
+
+	return Status;
+}
+
+EFI_STATUS
+EFIAPI
+DwUsbDriverBindingStart (
+	IN EFI_DRIVER_BINDING_PROTOCOL *This,
+	IN EFI_HANDLE                  Controller,
+	IN EFI_DEVICE_PATH_PROTOCOL    *RemainingDevicePath
+	)
+{
+    EFI_STATUS              Status;
+    DWUSB_OTGHC_DEV         *DwHc;
+	EFI_PCI_IO_PROTOCOL       *PciIo;
+	EFI_DEVICE_PATH_PROTOCOL  *HcDevicePath;
+
+    Status = EFI_SUCCESS;
+
+	//
+	// Open the PciIo Protocol, then enable the USB host controller
+	//
+	Status = gBS->OpenProtocol ( Controller,
+								 &gEfiPciIoProtocolGuid, 
+								 (VOID **) &PciIo,
+								 This->DriverBindingHandle,
+								 Controller,
+								 EFI_OPEN_PROTOCOL_BY_DRIVER );
+
+	if (EFI_ERROR (Status)) {
+		return Status;
+	}
+
+	DEBUG ((EFI_D_VERBOSE, "DwUsbDriverBindingStart2 \n"));
+	//
+	// Open Device Path Protocol for on USB host controller
+	//
+	HcDevicePath = NULL;
+	Status = gBS->OpenProtocol ( Controller,
+								 &gEfiDevicePathProtocolGuid,
+								 (VOID **) &HcDevicePath,
+								 This->DriverBindingHandle,
+								 Controller,
+								 EFI_OPEN_PROTOCOL_GET_PROTOCOL );
+	DEBUG ((EFI_D_VERBOSE, "DwUsbDriverBindingStart3 \n"));
+
+    if (EFI_ERROR (Status)) {
+        return Status;
+    }
+
+
+    DwHc = CreateDwUsbHc (PciIo);
+
+    if (DwHc == NULL) {
+        Status = EFI_OUT_OF_RESOURCES;
+        goto EXIT;
+    }
+
+	DEBUG ((EFI_D_VERBOSE, "DwUsbDriverBindingStart4 \n"));
+	Status = gBS->InstallProtocolInterface ( &Controller,
+											 &gEfiUsb2HcProtocolGuid,
+											 EFI_NATIVE_INTERFACE,
+											 &DwHc->DwUsbOtgHc );
+
+	DEBUG ((EFI_D_VERBOSE, "DwUsbDriverBindingStart5 \n"));
+    if (EFI_ERROR (Status)) {
+		goto UNINSTALL_PROTOCOL;
+    }
+
+	DEBUG ((EFI_D_VERBOSE, "DwUsbDriverBindingStart6 \n"));
+	//
+	// Start the asynchronous interrupt monitor
+	//
+	Status = gBS->CreateEvent (EVT_TIMER | EVT_NOTIFY_SIGNAL,
+							   TPL_CALLBACK,
+							   DwHcTimerCallback,
+							   DwHc,
+							   &DwHc->PollTimer);
+	if (EFI_ERROR (Status)) {
+		DEBUG ((EFI_D_ERROR, "Failed to register DwUsbHostDxe Timer\n"));				
+	}
+
+	Status = gBS->SetTimer (DwHc->PollTimer, TimerPeriodic, EFI_TIMER_PERIOD_MILLISECONDS(DW_USB_POLL_TIMER));
+	if (EFI_ERROR (Status)) {
+		DEBUG ((EFI_D_ERROR, "Failed to enable DwUsbHostDxe Timer\n"));				
+	}
+
+
+    Status = gBS->CreateEventEx (EVT_NOTIFY_SIGNAL,
+								 TPL_NOTIFY,
+								 DwUsbHcExitBootService,
+								 DwHc,
+								 &gEfiEventExitBootServicesGuid,
+								 &DwHc->ExitBootServiceEvent );
+
+    if (EFI_ERROR (Status)) {
+        goto UNINSTALL_PROTOCOL;
+    }
+
+    return Status;
+
+  UNINSTALL_PROTOCOL:
+    FreePool (DwHc);
+  EXIT:
+    return Status;
+}
+
+/**
+   Stop this driver on ControllerHandle. Support stopping any child handles
+   created by this driver.
+
+   @param  This                 Protocol instance pointer.
+   @param  Controller           Handle of device to stop driver on.
+   @param  NumberOfChildren     Number of Children in the ChildHandleBuffer.
+   @param  ChildHandleBuffer    List of handles for the children we need to stop.
+
+   @return EFI_SUCCESS          Success.
+   @return EFI_DEVICE_ERROR     Fail.
+
+**/
+EFI_STATUS
+EFIAPI
+DwUsbDriverBindingStop (
+	IN EFI_DRIVER_BINDING_PROTOCOL *This,
+	IN EFI_HANDLE                  Controller,
+	IN UINTN                       NumberOfChildren,
+	IN EFI_HANDLE                  *ChildHandleBuffer
+	)
+{
+	EFI_STATUS            Status;
+	EFI_USB2_HC_PROTOCOL  *Usb2Hc;
+//  EFI_PCI_IO_PROTOCOL   *PciIo;
+	DWUSB_OTGHC_DEV       *DwHc;
+
+	DEBUG ((EFI_D_ERROR, "DwUsbDriverBindingStop \n"));
+	//
+	// Test whether the Controller handler passed in is a valid
+	// Usb controller handle that should be supported, if not,
+	// return the error status directly
+	//
+	Status = gBS->OpenProtocol (
+		Controller,
+		&gEfiUsb2HcProtocolGuid,
+		(VOID **) &Usb2Hc,
+		This->DriverBindingHandle,
+		Controller,
+		EFI_OPEN_PROTOCOL_GET_PROTOCOL
+		);
+
+	if (EFI_ERROR (Status)) {
+		return Status;
+	}
+
+	DwHc = DWHC_FROM_THIS (This);
+
+	Status = gBS->UninstallProtocolInterface (
+		Controller,
+		&gEfiUsb2HcProtocolGuid,
+		DwHc
+		);
+
+	if (EFI_ERROR (Status)) {
+		return Status;
+	}
+
+	//
+	// Stop AsyncRequest Polling timer then stop the EHCI driver
+	// and uninstall the EHCI protocl.
+	//
+
+	// stop the interrupt handing
+	Status = gBS->SetTimer (DwHc->PollTimer, TimerCancel, 0 );
+	if (DwHc->PollTimer != NULL) {
+		gBS->CloseEvent (DwHc->PollTimer);
+	}
+  
+	if (DwHc->ExitBootServiceEvent != NULL) {
+		gBS->CloseEvent (DwHc->ExitBootServiceEvent);
+	}
+  
+/*
+  EhcFreeSched (Ehc);
+
+  if (Ehc->ControllerNameTable != NULL) {
+  FreeUnicodeStringTable (Ehc->ControllerNameTable);
+  }
+*/
+	//
+	// Disable routing of all ports to EHCI controller, so all ports are 
+	// routed back to the UHCI or OHCI controller.
+	//
+	/*EhcClearOpRegBit (Ehc, EHC_CONFIG_FLAG_OFFSET, CONFIGFLAG_ROUTE_EHC);
+
+	//
+	// Restore original PCI attributes
+	//
+	PciIo->Attributes (
+	PciIo,
+	EfiPciIoAttributeOperationSet,
+	Ehc->OriginalPciAttributes,
+	NULL
+	);
+	*/
+
+	gBS->CloseProtocol (
+		Controller,
+		&gEfiPciIoProtocolGuid,
+		This->DriverBindingHandle,
+		Controller
+		);
+
+	FreePool (DwHc);
+
+	return EFI_SUCCESS;
+}
+
+EFI_STATUS
+EFIAPI
+DwUsbHostExitPoint (
+    IN EFI_HANDLE ImageHandle
+    )
+{
+    EFI_STATUS              Status;
+
+    Status = EFI_SUCCESS;
+
+    return Status;
+}
+
+
+EFI_DRIVER_BINDING_PROTOCOL
+gDwUsbDriverBinding = {
+	DwUsbDriverBindingSupported,
+	DwUsbDriverBindingStart,
+	DwUsbDriverBindingStop,
+	0x30,
+	NULL,
+	NULL
+};
+
+EFI_STATUS
+EFIAPI
+DwUsbHostEntryPoint (
+	IN EFI_HANDLE                            ImageHandle,
+	IN EFI_SYSTEM_TABLE                      *SystemTable
+	)
+{
+	DEBUG ((EFI_D_ERROR, "DwUsbEntryPoint \n"));
+	return EfiLibInstallDriverBindingComponentName2 ( 
+		ImageHandle,
+		SystemTable,
+		&gDwUsbDriverBinding,
+		ImageHandle,
+		&gDwUsbComponentName,
+		&gDwUsbComponentName2
+		);
+}
diff --git a/Silicon/Synopsys/Usb/DwUsbHostDxe/DwUsbHostDxe.h b/Silicon/Synopsys/Usb/DwUsbHostDxe/DwUsbHostDxe.h
new file mode 100644
index 000000000..e76094646
--- /dev/null
+++ b/Silicon/Synopsys/Usb/DwUsbHostDxe/DwUsbHostDxe.h
@@ -0,0 +1,121 @@
+/** @file
+
+  Copyright (c) 2015-2016, Linaro Limited. All rights reserved.
+  Copyright (c) 2017, Jeremy Linton
+
+  This program and the accompanying materials
+  are licensed and made available under the terms and conditions of the BSD License
+  which accompanies this distribution.  The full text of the license may be found at
+  http://opensource.org/licenses/bsd-license.php
+
+  THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+  WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+
+#ifndef _DWUSBHOSTDXE_H_
+#define _DWUSBHOSTDXE_H_
+
+#include <Uefi.h>
+
+#include <IndustryStandard/Pci.h>
+#include <IndustryStandard/Usb.h>
+
+#include <Protocol/PciIo.h>
+#include <Protocol/Usb2HostController.h>
+
+#include <Guid/EventGroup.h>
+
+#include <Library/DebugLib.h>
+#include <Library/BaseMemoryLib.h>
+#include <Library/UefiDriverEntryPoint.h>
+#include <Library/UefiBootServicesTableLib.h>
+#include <Library/UefiLib.h>
+#include <Library/BaseLib.h>
+#include <Library/MemoryAllocationLib.h>
+#include <Library/UncachedMemoryAllocationLib.h>
+#include <Library/PcdLib.h>
+#include <Library/ReportStatusCodeLib.h>
+#include <Library/DevicePathLib.h>
+#include <Library/PcdLib.h>
+#include <Library/IoLib.h>
+#include <Library/TimerLib.h>
+#include "DwcHw.h"
+
+#define MAX_DEVICE                      16
+#define MAX_ENDPOINT                    16
+
+typedef struct _DWUSB_OTGHC_DEV DWUSB_OTGHC_DEV;
+
+#define DWUSB_OTGHC_DEV_SIGNATURE	SIGNATURE_32 ('d', 'w', 'h', 'c')
+#define DWHC_FROM_THIS(a)		CR(a, DWUSB_OTGHC_DEV, DwUsbOtgHc, DWUSB_OTGHC_DEV_SIGNATURE)
+
+extern EFI_DRIVER_BINDING_PROTOCOL   gDwUsbDriverBinding;
+extern EFI_COMPONENT_NAME_PROTOCOL   gDwUsbComponentName;
+extern EFI_COMPONENT_NAME2_PROTOCOL  gDwUsbComponentName2;
+
+//
+// The RequestType in EFI_USB_DEVICE_REQUEST is composed of
+// three fields: One bit direction, 2 bit type, and 5 bit
+// target.
+//
+#define USB_REQUEST_TYPE(Dir, Type, Target) \
+          ((UINT8)((((Dir) == EfiUsbDataIn ? 0x01 : 0) << 7) | (Type) | (Target)))
+
+typedef struct {
+	ACPI_HID_DEVICE_PATH		AcpiDevicePath;
+	PCI_DEVICE_PATH			    PciDevicePath;
+	EFI_DEVICE_PATH_PROTOCOL	EndDevicePath;
+} EFI_USB_PCIIO_DEVICE_PATH;
+
+typedef struct _DWUSB_INTERRUPT_QUEUE DWUSB_INTERRUPT_QUEUE;
+struct _DWUSB_INTERRUPT_QUEUE {
+	DWUSB_INTERRUPT_QUEUE                *Next;
+	EFI_ASYNC_USB_TRANSFER_CALLBACK       CallBackFunction;
+    VOID                                 *Data;
+	UINTN                                 DataLength;
+	VOID                                 *Context;
+    UINT32                                TransferResult;
+    UINT8                                 DeviceAddress; //used for matching
+    UINT8                                 EndPointAddress;
+	UINT8                                 Cancel;
+//  Now everything needed to queue another interrupt transfer
+	EFI_USB2_HC_PROTOCOL                  *This;
+	UINT8                                 DeviceSpeed;
+    UINTN                                 MaximumPacketLength;
+    EFI_USB2_HC_TRANSACTION_TRANSLATOR    *Translator;
+	UINT8                                 DataToggle;
+	UINT32                                TicksBeforeActive;
+	INT32                                 Ticks;
+};
+
+struct _DWUSB_OTGHC_DEV {
+	UINTN				Signature;
+	EFI_HANDLE			DeviceHandle;
+
+	EFI_USB2_HC_PROTOCOL		DwUsbOtgHc;
+
+	EFI_USB_HC_STATE		DwHcState;
+
+	EFI_USB_PCIIO_DEVICE_PATH	DevicePath;
+
+	EFI_EVENT			ExitBootServiceEvent;
+
+	UINT64				DwUsbBase;
+
+	UINT16				PortStatus;
+	UINT16				PortChangeStatus;
+
+	UINT32				RhDevNum;
+
+	EFI_EVENT           PollTimer; //interrupt transfers require an async response model, use a timer to send the query/callback
+	DWUSB_INTERRUPT_QUEUE *InterruptQueue; //the queue of interrupt transfer results
+	EFI_PCI_IO_PROTOCOL  *PciIo;
+	EFI_UNICODE_STRING_TABLE  *ControllerNameTable;
+	UINT32              BulkActive;
+	BOOLEAN             AtFullSpeed;
+	BOOLEAN             ActiveChannel[DWC2_MAX_CHANNELS];
+};
+
+#endif //_DWUSBHOSTDXE_H_
diff --git a/Silicon/Synopsys/Usb/DwUsbHostDxe/DwUsbHostDxe.inf b/Silicon/Synopsys/Usb/DwUsbHostDxe/DwUsbHostDxe.inf
new file mode 100644
index 000000000..5a2109599
--- /dev/null
+++ b/Silicon/Synopsys/Usb/DwUsbHostDxe/DwUsbHostDxe.inf
@@ -0,0 +1,61 @@
+#/** @file
+#
+#  Copyright (c) 2015-2016, Linaro Limited. All rights reserved.
+#  Copyright (c) 2017, Jeremy Linton
+#
+#  This program and the accompanying materials
+#  are licensed and made available under the terms and conditions of the BSD License
+#  which accompanies this distribution. The full text of the license may be found at
+#  http://opensource.org/licenses/bsd-license.php
+#  THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+#  WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+#
+#
+#**/
+
+[Defines]
+  INF_VERSION                    = 0x00010005
+  BASE_NAME                      = DwUsbHostDxe
+  FILE_GUID                      = 4bf1704c-03f4-46d5-bca6-82fa580badfd
+  MODULE_TYPE                    = UEFI_DRIVER
+  VERSION_STRING                 = 1.0
+  ENTRY_POINT                    = DwUsbHostEntryPoint
+#  UNLOAD_IMAGE                   = DwUsbHostExitPoint
+
+[Sources.common]
+  DwUsbHostDxe.c
+  ComponentName.c
+
+[Packages]
+  ArmPkg/ArmPkg.dec
+  EmbeddedPkg/EmbeddedPkg.dec
+  MdePkg/MdePkg.dec
+  MdeModulePkg/MdeModulePkg.dec
+  Silicon/Synopsys/Usb/DwUsbDxe/DwUsbDxe.dec
+
+[LibraryClasses]
+  DmaLib
+  MemoryAllocationLib
+  BaseLib
+  UefiLib
+  UefiBootServicesTableLib
+  UefiDriverEntryPoint
+  BaseMemoryLib
+  DebugLib
+  PcdLib
+  ReportStatusCodeLib
+  TimerLib
+  IoLib
+
+[Guids]
+  gEfiEventExitBootServicesGuid
+
+[Protocols]
+  gEfiDriverBindingProtocolGuid
+  gEfiUsb2HcProtocolGuid
+  gEfiPciIoProtocolGuid                         ## TO_START
+
+[Pcd]
+  gDwUsbDxeTokenSpaceGuid.PcdDwUsbBaseAddress
+  gDwUsbDxeTokenSpaceGuid.PcdDwUsbSysCtrlBaseAddress
+
diff --git a/Silicon/Synopsys/Usb/DwUsbHostDxe/DwcHw.h b/Silicon/Synopsys/Usb/DwUsbHostDxe/DwcHw.h
new file mode 100644
index 000000000..fbe07f64b
--- /dev/null
+++ b/Silicon/Synopsys/Usb/DwUsbHostDxe/DwcHw.h
@@ -0,0 +1,792 @@
+/** @file
+
+  Copyright (c) 2015-2016, Linaro Limited. All rights reserved.
+  Copyright (c) 2017, Jeremy Linton
+
+  This program and the accompanying materials
+  are licensed and made available under the terms and conditions of the BSD License
+  which accompanies this distribution.  The full text of the license may be found at
+  http://opensource.org/licenses/bsd-license.php
+
+  THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+  WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+#ifndef __DWCHW_H__
+#define __DWCHW_H__
+
+#define HSOTG_REG(x)    (x)
+
+#define HCCHAR(_ch)                     HSOTG_REG(0x0500 + 0x20 * (_ch))
+#define HCSPLT(_ch)                     HSOTG_REG(0x0504 + 0x20 * (_ch))
+#define HCINT(_ch)                      HSOTG_REG(0x0508 + 0x20 * (_ch))
+#define HCINTMSK(_ch)                   HSOTG_REG(0x050c + 0x20 * (_ch))
+#define HCTSIZ(_ch)                     HSOTG_REG(0x0510 + 0x20 * (_ch))
+#define HCDMA(_ch)                      HSOTG_REG(0x0514 + 0x20 * (_ch))
+#define HCDMAB(_ch)                     HSOTG_REG(0x051c + 0x20 * (_ch))
+
+#define HCFG                            HSOTG_REG(0x0400) //Host Config
+#define HFIR                            HSOTG_REG(0x0404) //Host Frame interval register
+#define HFNUM                           HSOTG_REG(0x0408) //Host Frame number/frame time
+#define HPTXSTS                         HSOTG_REG(0x0410) //Host periodic transmit fifo queue status reg
+#define HAINT                           HSOTG_REG(0x0414) //Host all channel interrupt register
+#define HAINTMSK                        HSOTG_REG(0x0418) //Host all channel interrupt mask
+#define HFLBADDR                        HSOTG_REG(0x041c) 
+
+#define GOTGCTL                         HSOTG_REG(0x000)
+#define GOTGINT                         HSOTG_REG(0x004)
+#define GAHBCFG                         HSOTG_REG(0x008)
+#define GUSBCFG                         HSOTG_REG(0x00C) //Global USB config
+#define GRSTCTL                         HSOTG_REG(0x010)
+#define GINTSTS                         HSOTG_REG(0x014)
+#define GINTMSK                         HSOTG_REG(0x018)
+#define GRXSTSR                         HSOTG_REG(0x01C)
+#define GRXSTSP                         HSOTG_REG(0x020)
+#define GRXFSIZ                         HSOTG_REG(0x024)
+#define GNPTXFSIZ                       HSOTG_REG(0x028)
+#define GNPTXSTS                        HSOTG_REG(0x02C)
+#define GI2CCTL                         HSOTG_REG(0x0030)
+#define GPVNDCTL                        HSOTG_REG(0x0034)
+#define GGPIO                           HSOTG_REG(0x0038)
+#define GUID                            HSOTG_REG(0x003c)
+#define GSNPSID                         HSOTG_REG(0x0040)
+#define GHWCFG1                         HSOTG_REG(0x0044)
+#define GHWCFG2                         HSOTG_REG(0x0048)
+#define GHWCFG3                         HSOTG_REG(0x004c)
+#define GHWCFG4                         HSOTG_REG(0x0050)
+#define GLPMCFG                         HSOTG_REG(0x0054)
+#define HPTXFSIZ                        HSOTG_REG(0x100)
+#define DPTXFSIZN(_a)                   HSOTG_REG(0x104 + (((_a) - 1) * 4))
+#define HPRT0                           HSOTG_REG(0x0440)
+#define PCGCCTL				HSOTG_REG(0xE00)
+
+#define DWC2_GOTGCTL_SESREQSCS				(1 << 0)
+#define DWC2_GOTGCTL_SESREQSCS_OFFSET			0
+#define DWC2_GOTGCTL_SESREQ				(1 << 1)
+#define DWC2_GOTGCTL_SESREQ_OFFSET			1
+#define DWC2_GOTGCTL_HSTNEGSCS				(1 << 8)
+#define DWC2_GOTGCTL_HSTNEGSCS_OFFSET			8
+#define DWC2_GOTGCTL_HNPREQ				(1 << 9)
+#define DWC2_GOTGCTL_HNPREQ_OFFSET			9
+#define DWC2_GOTGCTL_HSTSETHNPEN			(1 << 10)
+#define DWC2_GOTGCTL_HSTSETHNPEN_OFFSET			10
+#define DWC2_GOTGCTL_DEVHNPEN				(1 << 11)
+#define DWC2_GOTGCTL_DEVHNPEN_OFFSET			11
+#define DWC2_GOTGCTL_CONIDSTS				(1 << 16)
+#define DWC2_GOTGCTL_CONIDSTS_OFFSET			16
+#define DWC2_GOTGCTL_DBNCTIME				(1 << 17)
+#define DWC2_GOTGCTL_DBNCTIME_OFFSET			17
+#define DWC2_GOTGCTL_ASESVLD				(1 << 18)
+#define DWC2_GOTGCTL_ASESVLD_OFFSET			18
+#define DWC2_GOTGCTL_BSESVLD				(1 << 19)
+#define DWC2_GOTGCTL_BSESVLD_OFFSET			19
+#define DWC2_GOTGCTL_OTGVER				(1 << 20)
+#define DWC2_GOTGCTL_OTGVER_OFFSET			20
+#define DWC2_GOTGINT_SESENDDET				(1 << 2)
+#define DWC2_GOTGINT_SESENDDET_OFFSET			2
+#define DWC2_GOTGINT_SESREQSUCSTSCHNG			(1 << 8)
+#define DWC2_GOTGINT_SESREQSUCSTSCHNG_OFFSET		8
+#define DWC2_GOTGINT_HSTNEGSUCSTSCHNG			(1 << 9)
+#define DWC2_GOTGINT_HSTNEGSUCSTSCHNG_OFFSET		9
+#define DWC2_GOTGINT_RESERVER10_16_MASK			(0x7F << 10)
+#define DWC2_GOTGINT_RESERVER10_16_OFFSET		10
+#define DWC2_GOTGINT_HSTNEGDET				(1 << 17)
+#define DWC2_GOTGINT_HSTNEGDET_OFFSET			17
+#define DWC2_GOTGINT_ADEVTOUTCHNG			(1 << 18)
+#define DWC2_GOTGINT_ADEVTOUTCHNG_OFFSET		18
+#define DWC2_GOTGINT_DEBDONE				(1 << 19)
+#define DWC2_GOTGINT_DEBDONE_OFFSET			19
+#define DWC2_GAHBCFG_GLBLINTRMSK			(1 << 0)
+#define DWC2_GAHBCFG_GLBLINTRMSK_OFFSET			0
+#define DWC2_GAHBCFG_HBURSTLEN_SINGLE			(0 << 1)
+#define DWC2_GAHBCFG_HBURSTLEN_INCR			(1 << 1)
+#define DWC2_GAHBCFG_HBURSTLEN_INCR4			(3 << 1)
+#define DWC2_GAHBCFG_HBURSTLEN_INCR8			(5 << 1)
+#define DWC2_GAHBCFG_HBURSTLEN_INCR16			(7 << 1)
+#define DWC2_GAHBCFG_HBURSTLEN_MASK			(0xF << 1)
+#define DWC2_GAHBCFG_HBURSTLEN_OFFSET			1
+#define DWC2_GAHBCFG_DMAENABLE				(1 << 5)
+#define DWC2_GAHBCFG_DMAENABLE_OFFSET			5
+#define DWC2_GAHBCFG_NPTXFEMPLVL_TXFEMPLVL		(1 << 7)
+#define DWC2_GAHBCFG_NPTXFEMPLVL_TXFEMPLVL_OFFSET	7
+#define DWC2_GAHBCFG_PTXFEMPLVL				(1 << 8)
+#define DWC2_GAHBCFG_PTXFEMPLVL_OFFSET			8
+#define DWC2_GUSBCFG_TOUTCAL_MASK			(0x7 << 0)
+#define DWC2_GUSBCFG_TOUTCAL_OFFSET			0
+#define DWC2_GUSBCFG_PHYIF				(1 << 3)
+#define DWC2_GUSBCFG_PHYIF_OFFSET			3
+#define DWC2_GUSBCFG_ULPI_UTMI_SEL			(1 << 4)
+#define DWC2_GUSBCFG_ULPI_UTMI_SEL_OFFSET		4
+#define DWC2_GUSBCFG_FSINTF				(1 << 5)
+#define DWC2_GUSBCFG_FSINTF_OFFSET			5
+#define DWC2_GUSBCFG_PHYSEL				(1 << 6) //Phy select (host only) 1 full speed phy, 0 external hign speed
+#define DWC2_GUSBCFG_PHYSEL_OFFSET			6
+#define DWC2_GUSBCFG_DDRSEL				(1 << 7)
+#define DWC2_GUSBCFG_DDRSEL_OFFSET			7
+#define DWC2_GUSBCFG_SRPCAP				(1 << 8)
+#define DWC2_GUSBCFG_SRPCAP_OFFSET			8
+#define DWC2_GUSBCFG_HNPCAP				(1 << 9)
+#define DWC2_GUSBCFG_HNPCAP_OFFSET			9
+#define DWC2_GUSBCFG_USBTRDTIM_MASK			(0xF << 10)
+#define DWC2_GUSBCFG_USBTRDTIM_OFFSET			10
+#define DWC2_GUSBCFG_NPTXFRWNDEN			(1 << 14)
+#define DWC2_GUSBCFG_NPTXFRWNDEN_OFFSET			14
+#define DWC2_GUSBCFG_PHYLPWRCLKSEL			(1 << 15)
+#define DWC2_GUSBCFG_PHYLPWRCLKSEL_OFFSET		15
+#define DWC2_GUSBCFG_OTGUTMIFSSEL			(1 << 16)
+#define DWC2_GUSBCFG_OTGUTMIFSSEL_OFFSET		16
+#define DWC2_GUSBCFG_ULPI_FSLS				(1 << 17)
+#define DWC2_GUSBCFG_ULPI_FSLS_OFFSET			17
+#define DWC2_GUSBCFG_ULPI_AUTO_RES			(1 << 18)
+#define DWC2_GUSBCFG_ULPI_AUTO_RES_OFFSET		18
+#define DWC2_GUSBCFG_ULPI_CLK_SUS_M			(1 << 19)
+#define DWC2_GUSBCFG_ULPI_CLK_SUS_M_OFFSET		19
+#define DWC2_GUSBCFG_ULPI_EXT_VBUS_DRV			(1 << 20)
+#define DWC2_GUSBCFG_ULPI_EXT_VBUS_DRV_OFFSET		20
+#define DWC2_GUSBCFG_ULPI_INT_VBUS_INDICATOR		(1 << 21)
+#define DWC2_GUSBCFG_ULPI_INT_VBUS_INDICATOR_OFFSET	21
+#define DWC2_GUSBCFG_TERM_SEL_DL_PULSE			(1 << 22)
+#define DWC2_GUSBCFG_TERM_SEL_DL_PULSE_OFFSET		22
+#define DWC2_GUSBCFG_IC_USB_CAP				(1 << 26)
+#define DWC2_GUSBCFG_IC_USB_CAP_OFFSET			26
+#define DWC2_GUSBCFG_IC_TRAFFIC_PULL_REMOVE		(1 << 27)
+#define DWC2_GUSBCFG_IC_TRAFFIC_PULL_REMOVE_OFFSET	27
+#define DWC2_GUSBCFG_TX_END_DELAY			(1 << 28)
+#define DWC2_GUSBCFG_TX_END_DELAY_OFFSET		28
+#define DWC2_GUSBCFG_FORCEHOSTMODE			(1 << 29) //force host mode
+#define DWC2_GUSBCFG_FORCEHOSTMODE_OFFSET		29
+#define DWC2_GUSBCFG_FORCEDEVMODE			(1 << 30) //force device mode
+#define DWC2_GUSBCFG_FORCEDEVMODE_OFFSET		30
+#define DWC2_GLPMCTL_LPM_CAP_EN				(1 << 0)
+#define DWC2_GLPMCTL_LPM_CAP_EN_OFFSET			0
+#define DWC2_GLPMCTL_APPL_RESP				(1 << 1)
+#define DWC2_GLPMCTL_APPL_RESP_OFFSET			1
+#define DWC2_GLPMCTL_HIRD_MASK				(0xF << 2)
+#define DWC2_GLPMCTL_HIRD_OFFSET			2
+#define DWC2_GLPMCTL_REM_WKUP_EN			(1 << 6)
+#define DWC2_GLPMCTL_REM_WKUP_EN_OFFSET			6
+#define DWC2_GLPMCTL_EN_UTMI_SLEEP			(1 << 7)
+#define DWC2_GLPMCTL_EN_UTMI_SLEEP_OFFSET		7
+#define DWC2_GLPMCTL_HIRD_THRES_MASK			(0x1F << 8)
+#define DWC2_GLPMCTL_HIRD_THRES_OFFSET			8
+#define DWC2_GLPMCTL_LPM_RESP_MASK			(0x3 << 13)
+#define DWC2_GLPMCTL_LPM_RESP_OFFSET			13
+#define DWC2_GLPMCTL_PRT_SLEEP_STS			(1 << 15)
+#define DWC2_GLPMCTL_PRT_SLEEP_STS_OFFSET		15
+#define DWC2_GLPMCTL_SLEEP_STATE_RESUMEOK		(1 << 16)
+#define DWC2_GLPMCTL_SLEEP_STATE_RESUMEOK_OFFSET	16
+#define DWC2_GLPMCTL_LPM_CHAN_INDEX_MASK		(0xF << 17)
+#define DWC2_GLPMCTL_LPM_CHAN_INDEX_OFFSET		17
+#define DWC2_GLPMCTL_RETRY_COUNT_MASK			(0x7 << 21)
+#define DWC2_GLPMCTL_RETRY_COUNT_OFFSET			21
+#define DWC2_GLPMCTL_SEND_LPM				(1 << 24)
+#define DWC2_GLPMCTL_SEND_LPM_OFFSET			24
+#define DWC2_GLPMCTL_RETRY_COUNT_STS_MASK		(0x7 << 25)
+#define DWC2_GLPMCTL_RETRY_COUNT_STS_OFFSET		25
+#define DWC2_GLPMCTL_HSIC_CONNECT			(1 << 30)
+#define DWC2_GLPMCTL_HSIC_CONNECT_OFFSET		30
+#define DWC2_GLPMCTL_INV_SEL_HSIC			(1 << 31)
+#define DWC2_GLPMCTL_INV_SEL_HSIC_OFFSET		31
+#define DWC2_GRSTCTL_CSFTRST				(1 << 0)
+#define DWC2_GRSTCTL_CSFTRST_OFFSET			0
+#define DWC2_GRSTCTL_HSFTRST				(1 << 1)
+#define DWC2_GRSTCTL_HSFTRST_OFFSET			1
+#define DWC2_GRSTCTL_HSTFRM				(1 << 2)
+#define DWC2_GRSTCTL_HSTFRM_OFFSET			2
+#define DWC2_GRSTCTL_INTKNQFLSH				(1 << 3)
+#define DWC2_GRSTCTL_INTKNQFLSH_OFFSET			3
+#define DWC2_GRSTCTL_RXFFLSH				(1 << 4)
+#define DWC2_GRSTCTL_RXFFLSH_OFFSET			4
+#define DWC2_GRSTCTL_TXFFLSH				(1 << 5)
+#define DWC2_GRSTCTL_TXFFLSH_OFFSET			5
+#define DWC2_GRSTCTL_TXFNUM_MASK			(0x1F << 6)
+#define DWC2_GRSTCTL_TXFNUM_OFFSET			6
+#define DWC2_GRSTCTL_DMAREQ				(1 << 30)
+#define DWC2_GRSTCTL_DMAREQ_OFFSET			30
+#define DWC2_GRSTCTL_AHBIDLE				(1 << 31)
+#define DWC2_GRSTCTL_AHBIDLE_OFFSET			31
+#define DWC2_GINTMSK_MODEMISMATCH			(1 << 1)
+#define DWC2_GINTMSK_MODEMISMATCH_OFFSET		1
+#define DWC2_GINTMSK_OTGINTR				(1 << 2)
+#define DWC2_GINTMSK_OTGINTR_OFFSET			2
+#define DWC2_GINTMSK_SOFINTR				(1 << 3)
+#define DWC2_GINTMSK_SOFINTR_OFFSET			3
+#define DWC2_GINTMSK_RXSTSQLVL				(1 << 4)
+#define DWC2_GINTMSK_RXSTSQLVL_OFFSET			4
+#define DWC2_GINTMSK_NPTXFEMPTY				(1 << 5)
+#define DWC2_GINTMSK_NPTXFEMPTY_OFFSET			5
+#define DWC2_GINTMSK_GINNAKEFF				(1 << 6)
+#define DWC2_GINTMSK_GINNAKEFF_OFFSET			6
+#define DWC2_GINTMSK_GOUTNAKEFF				(1 << 7)
+#define DWC2_GINTMSK_GOUTNAKEFF_OFFSET			7
+#define DWC2_GINTMSK_I2CINTR				(1 << 9)
+#define DWC2_GINTMSK_I2CINTR_OFFSET			9
+#define DWC2_GINTMSK_ERLYSUSPEND			(1 << 10)
+#define DWC2_GINTMSK_ERLYSUSPEND_OFFSET			10
+#define DWC2_GINTMSK_USBSUSPEND				(1 << 11)
+#define DWC2_GINTMSK_USBSUSPEND_OFFSET			11
+#define DWC2_GINTMSK_USBRESET				(1 << 12)
+#define DWC2_GINTMSK_USBRESET_OFFSET			12
+#define DWC2_GINTMSK_ENUMDONE				(1 << 13)
+#define DWC2_GINTMSK_ENUMDONE_OFFSET			13
+#define DWC2_GINTMSK_ISOOUTDROP				(1 << 14)
+#define DWC2_GINTMSK_ISOOUTDROP_OFFSET			14
+#define DWC2_GINTMSK_EOPFRAME				(1 << 15)
+#define DWC2_GINTMSK_EOPFRAME_OFFSET			15
+#define DWC2_GINTMSK_EPMISMATCH				(1 << 17)
+#define DWC2_GINTMSK_EPMISMATCH_OFFSET			17
+#define DWC2_GINTMSK_INEPINTR				(1 << 18)
+#define DWC2_GINTMSK_INEPINTR_OFFSET			18
+#define DWC2_GINTMSK_OUTEPINTR				(1 << 19)
+#define DWC2_GINTMSK_OUTEPINTR_OFFSET			19
+#define DWC2_GINTMSK_INCOMPLISOIN			(1 << 20)
+#define DWC2_GINTMSK_INCOMPLISOIN_OFFSET		20
+#define DWC2_GINTMSK_INCOMPLISOOUT			(1 << 21)
+#define DWC2_GINTMSK_INCOMPLISOOUT_OFFSET		21
+#define DWC2_GINTMSK_PORTINTR				(1 << 24)
+#define DWC2_GINTMSK_PORTINTR_OFFSET			24
+#define DWC2_GINTMSK_HCINTR				(1 << 25)
+#define DWC2_GINTMSK_HCINTR_OFFSET			25
+#define DWC2_GINTMSK_PTXFEMPTY				(1 << 26)
+#define DWC2_GINTMSK_PTXFEMPTY_OFFSET			26
+#define DWC2_GINTMSK_LPMTRANRCVD			(1 << 27)
+#define DWC2_GINTMSK_LPMTRANRCVD_OFFSET			27
+#define DWC2_GINTMSK_CONIDSTSCHNG			(1 << 28)
+#define DWC2_GINTMSK_CONIDSTSCHNG_OFFSET		28
+#define DWC2_GINTMSK_DISCONNECT				(1 << 29)
+#define DWC2_GINTMSK_DISCONNECT_OFFSET			29
+#define DWC2_GINTMSK_SESSREQINTR			(1 << 30)
+#define DWC2_GINTMSK_SESSREQINTR_OFFSET			30
+#define DWC2_GINTMSK_WKUPINTR				(1 << 31)
+#define DWC2_GINTMSK_WKUPINTR_OFFSET			31
+#define DWC2_GINTSTS_CURMODE_DEVICE			(0 << 0)
+#define DWC2_GINTSTS_CURMODE_HOST			(1 << 0)
+#define DWC2_GINTSTS_CURMODE				(1 << 0)
+#define DWC2_GINTSTS_CURMODE_OFFSET			0
+#define DWC2_GINTSTS_MODEMISMATCH			(1 << 1)
+#define DWC2_GINTSTS_MODEMISMATCH_OFFSET		1
+#define DWC2_GINTSTS_OTGINTR				(1 << 2)
+#define DWC2_GINTSTS_OTGINTR_OFFSET			2
+#define DWC2_GINTSTS_SOFINTR				(1 << 3)
+#define DWC2_GINTSTS_SOFINTR_OFFSET			3
+#define DWC2_GINTSTS_RXSTSQLVL				(1 << 4)
+#define DWC2_GINTSTS_RXSTSQLVL_OFFSET			4
+#define DWC2_GINTSTS_NPTXFEMPTY				(1 << 5)
+#define DWC2_GINTSTS_NPTXFEMPTY_OFFSET			5
+#define DWC2_GINTSTS_GINNAKEFF				(1 << 6)
+#define DWC2_GINTSTS_GINNAKEFF_OFFSET			6
+#define DWC2_GINTSTS_GOUTNAKEFF				(1 << 7)
+#define DWC2_GINTSTS_GOUTNAKEFF_OFFSET			7
+#define DWC2_GINTSTS_I2CINTR				(1 << 9)
+#define DWC2_GINTSTS_I2CINTR_OFFSET			9
+#define DWC2_GINTSTS_ERLYSUSPEND			(1 << 10)
+#define DWC2_GINTSTS_ERLYSUSPEND_OFFSET			10
+#define DWC2_GINTSTS_USBSUSPEND				(1 << 11)
+#define DWC2_GINTSTS_USBSUSPEND_OFFSET			11
+#define DWC2_GINTSTS_USBRESET				(1 << 12)
+#define DWC2_GINTSTS_USBRESET_OFFSET			12
+#define DWC2_GINTSTS_ENUMDONE				(1 << 13)
+#define DWC2_GINTSTS_ENUMDONE_OFFSET			13
+#define DWC2_GINTSTS_ISOOUTDROP				(1 << 14)
+#define DWC2_GINTSTS_ISOOUTDROP_OFFSET			14
+#define DWC2_GINTSTS_EOPFRAME				(1 << 15)
+#define DWC2_GINTSTS_EOPFRAME_OFFSET			15
+#define DWC2_GINTSTS_INTOKENRX				(1 << 16)
+#define DWC2_GINTSTS_INTOKENRX_OFFSET			16
+#define DWC2_GINTSTS_EPMISMATCH				(1 << 17)
+#define DWC2_GINTSTS_EPMISMATCH_OFFSET			17
+#define DWC2_GINTSTS_INEPINT				(1 << 18)
+#define DWC2_GINTSTS_INEPINT_OFFSET			18
+#define DWC2_GINTSTS_OUTEPINTR				(1 << 19)
+#define DWC2_GINTSTS_OUTEPINTR_OFFSET			19
+#define DWC2_GINTSTS_INCOMPLISOIN			(1 << 20)
+#define DWC2_GINTSTS_INCOMPLISOIN_OFFSET		20
+#define DWC2_GINTSTS_INCOMPLISOOUT			(1 << 21)
+#define DWC2_GINTSTS_INCOMPLISOOUT_OFFSET		21
+#define DWC2_GINTSTS_PORTINTR				(1 << 24)
+#define DWC2_GINTSTS_PORTINTR_OFFSET			24
+#define DWC2_GINTSTS_HCINTR				(1 << 25)
+#define DWC2_GINTSTS_HCINTR_OFFSET			25
+#define DWC2_GINTSTS_PTXFEMPTY				(1 << 26)
+#define DWC2_GINTSTS_PTXFEMPTY_OFFSET			26
+#define DWC2_GINTSTS_LPMTRANRCVD			(1 << 27)
+#define DWC2_GINTSTS_LPMTRANRCVD_OFFSET			27
+#define DWC2_GINTSTS_CONIDSTSCHNG			(1 << 28)
+#define DWC2_GINTSTS_CONIDSTSCHNG_OFFSET		28
+#define DWC2_GINTSTS_DISCONNECT				(1 << 29)
+#define DWC2_GINTSTS_DISCONNECT_OFFSET			29
+#define DWC2_GINTSTS_SESSREQINTR			(1 << 30)
+#define DWC2_GINTSTS_SESSREQINTR_OFFSET			30
+#define DWC2_GINTSTS_WKUPINTR				(1 << 31)
+#define DWC2_GINTSTS_WKUPINTR_OFFSET			31
+#define DWC2_GRXSTS_EPNUM_MASK				(0xF << 0)
+#define DWC2_GRXSTS_EPNUM_OFFSET			0
+#define DWC2_GRXSTS_BCNT_MASK				(0x7FF << 4)
+#define DWC2_GRXSTS_BCNT_OFFSET				4
+#define DWC2_GRXSTS_DPID_MASK				(0x3 << 15)
+#define DWC2_GRXSTS_DPID_OFFSET				15
+#define DWC2_GRXSTS_PKTSTS_MASK				(0xF << 17)
+#define DWC2_GRXSTS_PKTSTS_OFFSET			17
+#define DWC2_GRXSTS_FN_MASK				(0xF << 21)
+#define DWC2_GRXSTS_FN_OFFSET				21
+#define DWC2_FIFOSIZE_STARTADDR_MASK			(0xFFFF << 0)
+#define DWC2_FIFOSIZE_STARTADDR_OFFSET			0
+#define DWC2_FIFOSIZE_DEPTH_MASK			(0xFFFF << 16)
+#define DWC2_FIFOSIZE_DEPTH_OFFSET			16
+#define DWC2_GNPTXSTS_NPTXFSPCAVAIL_MASK		(0xFFFF << 0)
+#define DWC2_GNPTXSTS_NPTXFSPCAVAIL_OFFSET		0
+#define DWC2_GNPTXSTS_NPTXQSPCAVAIL_MASK		(0xFF << 16)
+#define DWC2_GNPTXSTS_NPTXQSPCAVAIL_OFFSET		16
+#define DWC2_GNPTXSTS_NPTXQTOP_TERMINATE		(1 << 24)
+#define DWC2_GNPTXSTS_NPTXQTOP_TERMINATE_OFFSET		24
+#define DWC2_GNPTXSTS_NPTXQTOP_TOKEN_MASK		(0x3 << 25)
+#define DWC2_GNPTXSTS_NPTXQTOP_TOKEN_OFFSET		25
+#define DWC2_GNPTXSTS_NPTXQTOP_CHNEP_MASK		(0xF << 27)
+#define DWC2_GNPTXSTS_NPTXQTOP_CHNEP_OFFSET		27
+#define DWC2_DTXFSTS_TXFSPCAVAIL_MASK			(0xFFFF << 0)
+#define DWC2_DTXFSTS_TXFSPCAVAIL_OFFSET			0
+#define DWC2_GI2CCTL_RWDATA_MASK			(0xFF << 0)
+#define DWC2_GI2CCTL_RWDATA_OFFSET			0
+#define DWC2_GI2CCTL_REGADDR_MASK			(0xFF << 8)
+#define DWC2_GI2CCTL_REGADDR_OFFSET			8
+#define DWC2_GI2CCTL_ADDR_MASK				(0x7F << 16)
+#define DWC2_GI2CCTL_ADDR_OFFSET			16
+#define DWC2_GI2CCTL_I2CEN				(1 << 23)
+#define DWC2_GI2CCTL_I2CEN_OFFSET			23
+#define DWC2_GI2CCTL_ACK				(1 << 24)
+#define DWC2_GI2CCTL_ACK_OFFSET				24
+#define DWC2_GI2CCTL_I2CSUSPCTL				(1 << 25)
+#define DWC2_GI2CCTL_I2CSUSPCTL_OFFSET			25
+#define DWC2_GI2CCTL_I2CDEVADDR_MASK			(0x3 << 26)
+#define DWC2_GI2CCTL_I2CDEVADDR_OFFSET			26
+#define DWC2_GI2CCTL_RW					(1 << 30)
+#define DWC2_GI2CCTL_RW_OFFSET				30
+#define DWC2_GI2CCTL_BSYDNE				(1 << 31)
+#define DWC2_GI2CCTL_BSYDNE_OFFSET			31
+#define DWC2_HWCFG1_EP_DIR0_MASK			(0x3 << 0)
+#define DWC2_HWCFG1_EP_DIR0_OFFSET			0
+#define DWC2_HWCFG1_EP_DIR1_MASK			(0x3 << 2)
+#define DWC2_HWCFG1_EP_DIR1_OFFSET			2
+#define DWC2_HWCFG1_EP_DIR2_MASK			(0x3 << 4)
+#define DWC2_HWCFG1_EP_DIR2_OFFSET			4
+#define DWC2_HWCFG1_EP_DIR3_MASK			(0x3 << 6)
+#define DWC2_HWCFG1_EP_DIR3_OFFSET			6
+#define DWC2_HWCFG1_EP_DIR4_MASK			(0x3 << 8)
+#define DWC2_HWCFG1_EP_DIR4_OFFSET			8
+#define DWC2_HWCFG1_EP_DIR5_MASK			(0x3 << 10)
+#define DWC2_HWCFG1_EP_DIR5_OFFSET			10
+#define DWC2_HWCFG1_EP_DIR6_MASK			(0x3 << 12)
+#define DWC2_HWCFG1_EP_DIR6_OFFSET			12
+#define DWC2_HWCFG1_EP_DIR7_MASK			(0x3 << 14)
+#define DWC2_HWCFG1_EP_DIR7_OFFSET			14
+#define DWC2_HWCFG1_EP_DIR8_MASK			(0x3 << 16)
+#define DWC2_HWCFG1_EP_DIR8_OFFSET			16
+#define DWC2_HWCFG1_EP_DIR9_MASK			(0x3 << 18)
+#define DWC2_HWCFG1_EP_DIR9_OFFSET			18
+#define DWC2_HWCFG1_EP_DIR10_MASK			(0x3 << 20)
+#define DWC2_HWCFG1_EP_DIR10_OFFSET			20
+#define DWC2_HWCFG1_EP_DIR11_MASK			(0x3 << 22)
+#define DWC2_HWCFG1_EP_DIR11_OFFSET			22
+#define DWC2_HWCFG1_EP_DIR12_MASK			(0x3 << 24)
+#define DWC2_HWCFG1_EP_DIR12_OFFSET			24
+#define DWC2_HWCFG1_EP_DIR13_MASK			(0x3 << 26)
+#define DWC2_HWCFG1_EP_DIR13_OFFSET			26
+#define DWC2_HWCFG1_EP_DIR14_MASK			(0x3 << 28)
+#define DWC2_HWCFG1_EP_DIR14_OFFSET			28
+#define DWC2_HWCFG1_EP_DIR15_MASK			(0x3 << 30)
+#define DWC2_HWCFG1_EP_DIR15_OFFSET			30
+#define DWC2_HWCFG2_OP_MODE_MASK			(0x7 << 0)
+#define DWC2_HWCFG2_OP_MODE_OFFSET			0
+#define DWC2_HWCFG2_ARCHITECTURE_SLAVE_ONLY		(0x0 << 3)
+#define DWC2_HWCFG2_ARCHITECTURE_EXT_DMA		(0x1 << 3)
+#define DWC2_HWCFG2_ARCHITECTURE_INT_DMA		(0x2 << 3)
+#define DWC2_HWCFG2_ARCHITECTURE_MASK			(0x3 << 3)
+#define DWC2_HWCFG2_ARCHITECTURE_OFFSET			3
+#define DWC2_HWCFG2_POINT2POINT				(1 << 5)
+#define DWC2_HWCFG2_POINT2POINT_OFFSET			5
+#define DWC2_HWCFG2_HS_PHY_TYPE_MASK			(0x3 << 6)
+#define DWC2_HWCFG2_HS_PHY_TYPE_OFFSET			6
+#define DWC2_HWCFG2_FS_PHY_TYPE_MASK			(0x3 << 8)
+#define DWC2_HWCFG2_FS_PHY_TYPE_OFFSET			8
+#define DWC2_HWCFG2_NUM_DEV_EP_MASK			(0xF << 10)
+#define DWC2_HWCFG2_NUM_DEV_EP_OFFSET			10
+#define DWC2_HWCFG2_NUM_HOST_CHAN_MASK			(0xF << 14)
+#define DWC2_HWCFG2_NUM_HOST_CHAN_OFFSET		14
+#define DWC2_HWCFG2_PERIO_EP_SUPPORTED			(1 << 18)
+#define DWC2_HWCFG2_PERIO_EP_SUPPORTED_OFFSET		18
+#define DWC2_HWCFG2_DYNAMIC_FIFO			(1 << 19)
+#define DWC2_HWCFG2_DYNAMIC_FIFO_OFFSET			19
+#define DWC2_HWCFG2_MULTI_PROC_INT			(1 << 20)
+#define DWC2_HWCFG2_MULTI_PROC_INT_OFFSET		20
+#define DWC2_HWCFG2_NONPERIO_TX_Q_DEPTH_MASK		(0x3 << 22)
+#define DWC2_HWCFG2_NONPERIO_TX_Q_DEPTH_OFFSET		22
+#define DWC2_HWCFG2_HOST_PERIO_TX_Q_DEPTH_MASK		(0x3 << 24)
+#define DWC2_HWCFG2_HOST_PERIO_TX_Q_DEPTH_OFFSET	24
+#define DWC2_HWCFG2_DEV_TOKEN_Q_DEPTH_MASK		(0x1F << 26)
+#define DWC2_HWCFG2_DEV_TOKEN_Q_DEPTH_OFFSET		26
+#define DWC2_HWCFG3_XFER_SIZE_CNTR_WIDTH_MASK		(0xF << 0)
+#define DWC2_HWCFG3_XFER_SIZE_CNTR_WIDTH_OFFSET		0
+#define DWC2_HWCFG3_PACKET_SIZE_CNTR_WIDTH_MASK		(0x7 << 4)
+#define DWC2_HWCFG3_PACKET_SIZE_CNTR_WIDTH_OFFSET	4
+#define DWC2_HWCFG3_OTG_FUNC				(1 << 7)
+#define DWC2_HWCFG3_OTG_FUNC_OFFSET			7
+#define DWC2_HWCFG3_I2C					(1 << 8)
+#define DWC2_HWCFG3_I2C_OFFSET				8
+#define DWC2_HWCFG3_VENDOR_CTRL_IF			(1 << 9)
+#define DWC2_HWCFG3_VENDOR_CTRL_IF_OFFSET		9
+#define DWC2_HWCFG3_OPTIONAL_FEATURES			(1 << 10)
+#define DWC2_HWCFG3_OPTIONAL_FEATURES_OFFSET		10
+#define DWC2_HWCFG3_SYNCH_RESET_TYPE			(1 << 11)
+#define DWC2_HWCFG3_SYNCH_RESET_TYPE_OFFSET		11
+#define DWC2_HWCFG3_OTG_ENABLE_IC_USB			(1 << 12)
+#define DWC2_HWCFG3_OTG_ENABLE_IC_USB_OFFSET		12
+#define DWC2_HWCFG3_OTG_ENABLE_HSIC			(1 << 13)
+#define DWC2_HWCFG3_OTG_ENABLE_HSIC_OFFSET		13
+#define DWC2_HWCFG3_OTG_LPM_EN				(1 << 15)
+#define DWC2_HWCFG3_OTG_LPM_EN_OFFSET			15
+#define DWC2_HWCFG3_DFIFO_DEPTH_MASK			(0xFFFF << 16)
+#define DWC2_HWCFG3_DFIFO_DEPTH_OFFSET			16
+#define DWC2_HWCFG4_NUM_DEV_PERIO_IN_EP_MASK		(0xF << 0)
+#define DWC2_HWCFG4_NUM_DEV_PERIO_IN_EP_OFFSET		0
+#define DWC2_HWCFG4_POWER_OPTIMIZ			(1 << 4)
+#define DWC2_HWCFG4_POWER_OPTIMIZ_OFFSET		4
+#define DWC2_HWCFG4_MIN_AHB_FREQ_MASK			(0x1FF << 5)
+#define DWC2_HWCFG4_MIN_AHB_FREQ_OFFSET			5
+#define DWC2_HWCFG4_UTMI_PHY_DATA_WIDTH_MASK		(0x3 << 14)
+#define DWC2_HWCFG4_UTMI_PHY_DATA_WIDTH_OFFSET		14
+#define DWC2_HWCFG4_NUM_DEV_MODE_CTRL_EP_MASK		(0xF << 16)
+#define DWC2_HWCFG4_NUM_DEV_MODE_CTRL_EP_OFFSET		16
+#define DWC2_HWCFG4_IDDIG_FILT_EN			(1 << 20)
+#define DWC2_HWCFG4_IDDIG_FILT_EN_OFFSET		20
+#define DWC2_HWCFG4_VBUS_VALID_FILT_EN			(1 << 21)
+#define DWC2_HWCFG4_VBUS_VALID_FILT_EN_OFFSET		21
+#define DWC2_HWCFG4_A_VALID_FILT_EN			(1 << 22)
+#define DWC2_HWCFG4_A_VALID_FILT_EN_OFFSET		22
+#define DWC2_HWCFG4_B_VALID_FILT_EN			(1 << 23)
+#define DWC2_HWCFG4_B_VALID_FILT_EN_OFFSET		23
+#define DWC2_HWCFG4_SESSION_END_FILT_EN			(1 << 24)
+#define DWC2_HWCFG4_SESSION_END_FILT_EN_OFFSET		24
+#define DWC2_HWCFG4_DED_FIFO_EN				(1 << 25)
+#define DWC2_HWCFG4_DED_FIFO_EN_OFFSET			25
+#define DWC2_HWCFG4_NUM_IN_EPS_MASK			(0xF << 26)
+#define DWC2_HWCFG4_NUM_IN_EPS_OFFSET			26
+#define DWC2_HWCFG4_DESC_DMA				(1 << 30)
+#define DWC2_HWCFG4_DESC_DMA_OFFSET			30
+#define DWC2_HWCFG4_DESC_DMA_DYN			(1 << 31)
+#define DWC2_HWCFG4_DESC_DMA_DYN_OFFSET			31
+#define DWC2_HCFG_FSLSPCLKSEL_30_60_MHZ			0
+#define DWC2_HCFG_FSLSPCLKSEL_48_MHZ			1
+#define DWC2_HCFG_FSLSPCLKSEL_6_MHZ			2
+#define DWC2_HCFG_FSLSPCLKSEL_MASK			(0x3 << 0)
+#define DWC2_HCFG_FSLSPCLKSEL_OFFSET			0
+#define DWC2_HCFG_FSLSSUPP				(1 << 2) //Force core to enumerate at FS/LS mode
+#define DWC2_HCFG_FSLSSUPP_OFFSET			2
+#define DWC2_HCFG_DESCDMA				(1 << 23)
+#define DWC2_HCFG_DESCDMA_OFFSET			23
+#define DWC2_HCFG_FRLISTEN_MASK				(0x3 << 24)
+#define DWC2_HCFG_FRLISTEN_OFFSET			24
+#define DWC2_HCFG_PERSCHEDENA				(1 << 26)
+#define DWC2_HCFG_PERSCHEDENA_OFFSET			26
+#define DWC2_HCFG_PERSCHEDSTAT				(1 << 27)
+#define DWC2_HCFG_PERSCHEDSTAT_OFFSET			27
+#define DWC2_HFIR_FRINT_MASK				(0xFFFF << 0)
+#define DWC2_HFIR_FRINT_OFFSET				0
+#define DWC2_HFNUM_FRNUM_MASK				(0xFFFF << 0)
+#define DWC2_HFNUM_FRNUM_OFFSET				0
+#define DWC2_HFNUM_FRREM_MASK				(0xFFFF << 16)
+#define DWC2_HFNUM_FRREM_OFFSET				16
+#define DWC2_HPTXSTS_PTXFSPCAVAIL_MASK			(0xFFFF << 0)
+#define DWC2_HPTXSTS_PTXFSPCAVAIL_OFFSET		0
+#define DWC2_HPTXSTS_PTXQSPCAVAIL_MASK			(0xFF << 16)
+#define DWC2_HPTXSTS_PTXQSPCAVAIL_OFFSET		16
+#define DWC2_HPTXSTS_PTXQTOP_TERMINATE			(1 << 24)
+#define DWC2_HPTXSTS_PTXQTOP_TERMINATE_OFFSET		24
+#define DWC2_HPTXSTS_PTXQTOP_TOKEN_MASK			(0x3 << 25)
+#define DWC2_HPTXSTS_PTXQTOP_TOKEN_OFFSET		25
+#define DWC2_HPTXSTS_PTXQTOP_CHNUM_MASK			(0xF << 27)
+#define DWC2_HPTXSTS_PTXQTOP_CHNUM_OFFSET		27
+#define DWC2_HPTXSTS_PTXQTOP_ODD			(1 << 31)
+#define DWC2_HPTXSTS_PTXQTOP_ODD_OFFSET			31
+#define DWC2_HPRT0_PRTCONNSTS				(1 << 0)
+#define DWC2_HPRT0_PRTCONNSTS_OFFSET			0
+#define DWC2_HPRT0_PRTCONNDET				(1 << 1)
+#define DWC2_HPRT0_PRTCONNDET_OFFSET			1
+#define DWC2_HPRT0_PRTENA				(1 << 2)
+#define DWC2_HPRT0_PRTENA_OFFSET			2
+#define DWC2_HPRT0_PRTENCHNG				(1 << 3)
+#define DWC2_HPRT0_PRTENCHNG_OFFSET			3
+#define DWC2_HPRT0_PRTOVRCURRACT			(1 << 4)
+#define DWC2_HPRT0_PRTOVRCURRACT_OFFSET			4
+#define DWC2_HPRT0_PRTOVRCURRCHNG			(1 << 5)
+#define DWC2_HPRT0_PRTOVRCURRCHNG_OFFSET		5
+#define DWC2_HPRT0_PRTRES				(1 << 6)
+#define DWC2_HPRT0_PRTRES_OFFSET			6
+#define DWC2_HPRT0_PRTSUSP				(1 << 7)
+#define DWC2_HPRT0_PRTSUSP_OFFSET			7
+#define DWC2_HPRT0_PRTRST				(1 << 8)
+#define DWC2_HPRT0_PRTRST_OFFSET			8
+#define DWC2_HPRT0_PRTLNSTS_MASK			(0x3 << 10)
+#define DWC2_HPRT0_PRTLNSTS_OFFSET			10
+#define DWC2_HPRT0_PRTPWR				(1 << 12)
+#define DWC2_HPRT0_PRTPWR_OFFSET			12
+#define DWC2_HPRT0_PRTTSTCTL_MASK			(0xF << 13)
+#define DWC2_HPRT0_PRTTSTCTL_OFFSET			13
+#define DWC2_HPRT0_PRTSPD_MASK				(0x3 << 17)
+#define DWC2_HPRT0_PRTSPD_OFFSET			17
+#define DWC2_HAINT_CH0					(1 << 0)
+#define DWC2_HAINT_CH0_OFFSET				0
+#define DWC2_HAINT_CH1					(1 << 1)
+#define DWC2_HAINT_CH1_OFFSET				1
+#define DWC2_HAINT_CH2					(1 << 2)
+#define DWC2_HAINT_CH2_OFFSET				2
+#define DWC2_HAINT_CH3					(1 << 3)
+#define DWC2_HAINT_CH3_OFFSET				3
+#define DWC2_HAINT_CH4					(1 << 4)
+#define DWC2_HAINT_CH4_OFFSET				4
+#define DWC2_HAINT_CH5					(1 << 5)
+#define DWC2_HAINT_CH5_OFFSET				5
+#define DWC2_HAINT_CH6					(1 << 6)
+#define DWC2_HAINT_CH6_OFFSET				6
+#define DWC2_HAINT_CH7					(1 << 7)
+#define DWC2_HAINT_CH7_OFFSET				7
+#define DWC2_HAINT_CH8					(1 << 8)
+#define DWC2_HAINT_CH8_OFFSET				8
+#define DWC2_HAINT_CH9					(1 << 9)
+#define DWC2_HAINT_CH9_OFFSET				9
+#define DWC2_HAINT_CH10					(1 << 10)
+#define DWC2_HAINT_CH10_OFFSET				10
+#define DWC2_HAINT_CH11					(1 << 11)
+#define DWC2_HAINT_CH11_OFFSET				11
+#define DWC2_HAINT_CH12					(1 << 12)
+#define DWC2_HAINT_CH12_OFFSET				12
+#define DWC2_HAINT_CH13					(1 << 13)
+#define DWC2_HAINT_CH13_OFFSET				13
+#define DWC2_HAINT_CH14					(1 << 14)
+#define DWC2_HAINT_CH14_OFFSET				14
+#define DWC2_HAINT_CH15					(1 << 15)
+#define DWC2_HAINT_CH15_OFFSET				15
+#define DWC2_HAINT_CHINT_MASK				0xffff
+#define DWC2_HAINT_CHINT_OFFSET				0
+#define DWC2_HAINTMSK_CH0				(1 << 0)
+#define DWC2_HAINTMSK_CH0_OFFSET			0
+#define DWC2_HAINTMSK_CH1				(1 << 1)
+#define DWC2_HAINTMSK_CH1_OFFSET			1
+#define DWC2_HAINTMSK_CH2				(1 << 2)
+#define DWC2_HAINTMSK_CH2_OFFSET			2
+#define DWC2_HAINTMSK_CH3				(1 << 3)
+#define DWC2_HAINTMSK_CH3_OFFSET			3
+#define DWC2_HAINTMSK_CH4				(1 << 4)
+#define DWC2_HAINTMSK_CH4_OFFSET			4
+#define DWC2_HAINTMSK_CH5				(1 << 5)
+#define DWC2_HAINTMSK_CH5_OFFSET			5
+#define DWC2_HAINTMSK_CH6				(1 << 6)
+#define DWC2_HAINTMSK_CH6_OFFSET			6
+#define DWC2_HAINTMSK_CH7				(1 << 7)
+#define DWC2_HAINTMSK_CH7_OFFSET			7
+#define DWC2_HAINTMSK_CH8				(1 << 8)
+#define DWC2_HAINTMSK_CH8_OFFSET			8
+#define DWC2_HAINTMSK_CH9				(1 << 9)
+#define DWC2_HAINTMSK_CH9_OFFSET			9
+#define DWC2_HAINTMSK_CH10				(1 << 10)
+#define DWC2_HAINTMSK_CH10_OFFSET			10
+#define DWC2_HAINTMSK_CH11				(1 << 11)
+#define DWC2_HAINTMSK_CH11_OFFSET			11
+#define DWC2_HAINTMSK_CH12				(1 << 12)
+#define DWC2_HAINTMSK_CH12_OFFSET			12
+#define DWC2_HAINTMSK_CH13				(1 << 13)
+#define DWC2_HAINTMSK_CH13_OFFSET			13
+#define DWC2_HAINTMSK_CH14				(1 << 14)
+#define DWC2_HAINTMSK_CH14_OFFSET			14
+#define DWC2_HAINTMSK_CH15				(1 << 15)
+#define DWC2_HAINTMSK_CH15_OFFSET			15
+#define DWC2_HAINTMSK_CHINT_MASK			0xffff
+#define DWC2_HAINTMSK_CHINT_OFFSET			0
+#define DWC2_HCCHAR_MPS_MASK				(0x7FF << 0)
+#define DWC2_HCCHAR_MPS_OFFSET				0
+#define DWC2_HCCHAR_EPNUM_MASK				(0xF << 11)
+#define DWC2_HCCHAR_EPNUM_OFFSET			11
+#define DWC2_HCCHAR_EPDIR				(1 << 15)
+#define DWC2_HCCHAR_EPDIR_OFFSET			15
+#define DWC2_HCCHAR_LSPDDEV				(1 << 17)
+#define DWC2_HCCHAR_LSPDDEV_OFFSET			17
+#define DWC2_HCCHAR_EPTYPE_CONTROL			0
+#define DWC2_HCCHAR_EPTYPE_ISOC				1
+#define DWC2_HCCHAR_EPTYPE_BULK				2
+#define DWC2_HCCHAR_EPTYPE_INTR				3
+#define DWC2_HCCHAR_EPTYPE_MASK				(0x3 << 18)
+#define DWC2_HCCHAR_EPTYPE_OFFSET			18
+#define DWC2_HCCHAR_MULTICNT_MASK			(0x3 << 20)
+#define DWC2_HCCHAR_MULTICNT_OFFSET			20
+#define DWC2_HCCHAR_DEVADDR_MASK			(0x7F << 22)
+#define DWC2_HCCHAR_DEVADDR_OFFSET			22
+#define DWC2_HCCHAR_ODDFRM				(1 << 29)
+#define DWC2_HCCHAR_ODDFRM_OFFSET			29
+#define DWC2_HCCHAR_CHDIS				(1 << 30)
+#define DWC2_HCCHAR_CHDIS_OFFSET			30
+#define DWC2_HCCHAR_CHEN				(1 << 31)
+#define DWC2_HCCHAR_CHEN_OFFSET				31
+#define DWC2_HCSPLT_PRTADDR_MASK			(0x7F << 0)
+#define DWC2_HCSPLT_PRTADDR_OFFSET			0
+#define DWC2_HCSPLT_HUBADDR_MASK			(0x7F << 7)
+#define DWC2_HCSPLT_HUBADDR_OFFSET			7
+#define DWC2_HCSPLT_XACTPOS_MASK			(0x3 << 14)
+#define DWC2_HCSPLT_XACTPOS_MID              0
+#define DWC2_HCSPLT_XACTPOS_END              1 //otherwise each transaction needs to indicate if its beginning/mid/end
+#define DWC2_HCSPLT_XACTPOS_BEGIN            2
+#define DWC2_HCSPLT_XACTPOS_ALL              3 //Xact all, is for complete transactions < 188 bytes
+#define DWC2_HCSPLT_XACTPOS_OFFSET			14
+#define DWC2_HCSPLT_COMPSPLT				(1 << 16) //Do complete split, (request host to do the complete split transaction)
+#define DWC2_HCSPLT_COMPSPLT_OFFSET			16
+#define DWC2_HCSPLT_SPLTENA				(1 << 31)
+#define DWC2_HCSPLT_SPLTENA_OFFSET			31
+#define DWC2_HCINT_XFERCOMP				(1 << 0)
+#define DWC2_HCINT_XFERCOMP_OFFSET			0
+#define DWC2_HCINT_CHHLTD				(1 << 1) //Channel Halt
+#define DWC2_HCINT_CHHLTD_OFFSET			1
+#define DWC2_HCINT_AHBERR				(1 << 2)
+#define DWC2_HCINT_AHBERR_OFFSET			2
+#define DWC2_HCINT_STALL				(1 << 3)
+#define DWC2_HCINT_STALL_OFFSET				3
+#define DWC2_HCINT_NAK					(1 << 4)
+#define DWC2_HCINT_NAK_OFFSET				4
+#define DWC2_HCINT_ACK					(1 << 5)
+#define DWC2_HCINT_ACK_OFFSET				5
+#define DWC2_HCINT_NYET					(1 << 6)
+#define DWC2_HCINT_NYET_OFFSET				6
+#define DWC2_HCINT_XACTERR				(1 << 7)
+#define DWC2_HCINT_XACTERR_OFFSET			7
+#define DWC2_HCINT_BBLERR				(1 << 8)
+#define DWC2_HCINT_BBLERR_OFFSET			8
+#define DWC2_HCINT_FRMOVRUN				(1 << 9)
+#define DWC2_HCINT_FRMOVRUN_OFFSET			9
+#define DWC2_HCINT_DATATGLERR				(1 << 10)
+#define DWC2_HCINT_DATATGLERR_OFFSET			10
+#define DWC2_HCINT_BNA					(1 << 11)
+#define DWC2_HCINT_BNA_OFFSET				11
+#define DWC2_HCINT_XCS_XACT				(1 << 12)
+#define DWC2_HCINT_XCS_XACT_OFFSET			12
+#define DWC2_HCINT_FRM_LIST_ROLL			(1 << 13)
+#define DWC2_HCINT_FRM_LIST_ROLL_OFFSET			13
+#define DWC2_HCINTMSK_XFERCOMPL				(1 << 0)
+#define DWC2_HCINTMSK_XFERCOMPL_OFFSET			0
+#define DWC2_HCINTMSK_CHHLTD				(1 << 1)
+#define DWC2_HCINTMSK_CHHLTD_OFFSET			1
+#define DWC2_HCINTMSK_AHBERR				(1 << 2)
+#define DWC2_HCINTMSK_AHBERR_OFFSET			2
+#define DWC2_HCINTMSK_STALL				(1 << 3)
+#define DWC2_HCINTMSK_STALL_OFFSET			3
+#define DWC2_HCINTMSK_NAK				(1 << 4)
+#define DWC2_HCINTMSK_NAK_OFFSET			4
+#define DWC2_HCINTMSK_ACK				(1 << 5)
+#define DWC2_HCINTMSK_ACK_OFFSET			5
+#define DWC2_HCINTMSK_NYET				(1 << 6)
+#define DWC2_HCINTMSK_NYET_OFFSET			6
+#define DWC2_HCINTMSK_XACTERR				(1 << 7)
+#define DWC2_HCINTMSK_XACTERR_OFFSET			7
+#define DWC2_HCINTMSK_BBLERR				(1 << 8)
+#define DWC2_HCINTMSK_BBLERR_OFFSET			8
+#define DWC2_HCINTMSK_FRMOVRUN				(1 << 9)
+#define DWC2_HCINTMSK_FRMOVRUN_OFFSET			9
+#define DWC2_HCINTMSK_DATATGLERR			(1 << 10)
+#define DWC2_HCINTMSK_DATATGLERR_OFFSET			10
+#define DWC2_HCINTMSK_BNA				(1 << 11)
+#define DWC2_HCINTMSK_BNA_OFFSET			11
+#define DWC2_HCINTMSK_XCS_XACT				(1 << 12)
+#define DWC2_HCINTMSK_XCS_XACT_OFFSET			12
+#define DWC2_HCINTMSK_FRM_LIST_ROLL			(1 << 13)
+#define DWC2_HCINTMSK_FRM_LIST_ROLL_OFFSET		13
+#define DWC2_HCTSIZ_XFERSIZE_MASK			0x7ffff
+#define DWC2_HCTSIZ_XFERSIZE_OFFSET			0
+#define DWC2_HCTSIZ_SCHINFO_MASK			0xff
+#define DWC2_HCTSIZ_SCHINFO_OFFSET			0
+#define DWC2_HCTSIZ_NTD_MASK				(0xff << 8)
+#define DWC2_HCTSIZ_NTD_OFFSET				8
+#define DWC2_HCTSIZ_PKTCNT_MASK				(0x3ff << 19)
+#define DWC2_HCTSIZ_PKTCNT_OFFSET			19
+#define DWC2_HCTSIZ_PID_MASK				(0x3 << 29)
+#define DWC2_HCTSIZ_PID_OFFSET				29
+#define DWC2_HCTSIZ_DOPNG				(1 << 31)
+#define DWC2_HCTSIZ_DOPNG_OFFSET			31
+#define DWC2_HCDMA_CTD_MASK				(0xFF << 3)
+#define DWC2_HCDMA_CTD_OFFSET				3
+#define DWC2_HCDMA_DMA_ADDR_MASK			(0x1FFFFF << 11)
+#define DWC2_HCDMA_DMA_ADDR_OFFSET			11
+#define DWC2_PCGCCTL_STOPPCLK				(1 << 0)
+#define DWC2_PCGCCTL_STOPPCLK_OFFSET			0
+#define DWC2_PCGCCTL_GATEHCLK				(1 << 1)
+#define DWC2_PCGCCTL_GATEHCLK_OFFSET			1
+#define DWC2_PCGCCTL_PWRCLMP				(1 << 2)
+#define DWC2_PCGCCTL_PWRCLMP_OFFSET			2
+#define DWC2_PCGCCTL_RSTPDWNMODULE			(1 << 3)
+#define DWC2_PCGCCTL_RSTPDWNMODULE_OFFSET		3
+#define DWC2_PCGCCTL_PHYSUSPENDED			(1 << 4)
+#define DWC2_PCGCCTL_PHYSUSPENDED_OFFSET		4
+#define DWC2_PCGCCTL_ENBL_SLEEP_GATING			(1 << 5)
+#define DWC2_PCGCCTL_ENBL_SLEEP_GATING_OFFSET		5
+#define DWC2_PCGCCTL_PHY_IN_SLEEP			(1 << 6)
+#define DWC2_PCGCCTL_PHY_IN_SLEEP_OFFSET		6
+#define DWC2_PCGCCTL_DEEP_SLEEP				(1 << 7)
+#define DWC2_PCGCCTL_DEEP_SLEEP_OFFSET			7
+#define DWC2_SNPSID_DEVID_VER_2xx			(0x4f542 << 12)
+#define DWC2_SNPSID_DEVID_VER_3xx			(0x4f543 << 12)
+#define DWC2_SNPSID_DEVID_MASK				(0xfffff << 12)
+#define DWC2_SNPSID_DEVID_OFFSET			12
+
+/* Host controller specific */
+#define DWC2_HC_PID_DATA0		0
+#define DWC2_HC_PID_DATA2		1
+#define DWC2_HC_PID_DATA1		2
+#define DWC2_HC_PID_MDATA		3
+#define DWC2_HC_PID_SETUP		3
+
+/* roothub.a masks */
+#define RH_A_NDP	(0xff << 0)	/* number of downstream ports */
+#define RH_A_PSM	(1 << 8)	/* power switching mode */
+#define RH_A_NPS	(1 << 9)	/* no power switching */
+#define RH_A_DT		(1 << 10)	/* device type (mbz) */
+#define RH_A_OCPM	(1 << 11)	/* over current protection mode */
+#define RH_A_NOCP	(1 << 12)	/* no over current protection */
+#define RH_A_POTPGT	(0xff << 24)	/* power on to power good time */
+
+/* roothub.b masks */
+#define RH_B_DR		0x0000ffff	/* device removable flags */
+#define RH_B_PPCM	0xffff0000	/* port power control mask */
+
+#define DWC2_PHY_TYPE_FS		0
+#define DWC2_PHY_TYPE_UTMI		1
+#define DWC2_PHY_TYPE_ULPI		2
+#define CONFIG_DWC2_PHY_TYPE		DWC2_PHY_TYPE_UTMI	/* PHY type */
+#define CONFIG_DWC2_UTMI_WIDTH		8	/* UTMI bus width (8/16) */
+
+#define DWC2_DMA_BURST_SIZE              32      /* DMA burst len */
+//#define DWC2_MAX_CHANNELS                16      /* Max # of EPs */
+#define DWC2_MAX_CHANNELS                12      /* Max # of EPs (12 for LS/FS)*/
+#define DWC2_HOST_RX_FIFO_SIZE           (516 + DWC2_MAX_CHANNELS)
+#define DWC2_HOST_NPERIO_TX_FIFO_SIZE    0x100   /* nPeriodic TX FIFO */
+#define DWC2_HOST_PERIO_TX_FIFO_SIZE     0x200   /* Periodic TX FIFO */
+#define DWC2_MAX_TRANSFER_SIZE           65535
+#define DWC2_MAX_PACKET_COUNT            511
+
+#define DWC2_HC_CHANNEL                 0
+
+#define DWC2_STATUS_BUF_SIZE            64
+#define DWC2_DATA_BUF_SIZE              (64 * 1024)
+
+
+#define USB_PORT_FEAT_CONNECTION     0
+#define USB_PORT_FEAT_ENABLE         1
+#define USB_PORT_FEAT_SUSPEND        2
+#define USB_PORT_FEAT_OVER_CURRENT   3
+#define USB_PORT_FEAT_RESET          4
+#define USB_PORT_FEAT_POWER          8
+#define USB_PORT_FEAT_LOWSPEED       9
+#define USB_PORT_FEAT_HIGHSPEED      10
+#define USB_PORT_FEAT_C_CONNECTION   16
+#define USB_PORT_FEAT_C_ENABLE       17
+#define USB_PORT_FEAT_C_SUSPEND      18
+#define USB_PORT_FEAT_C_OVER_CURRENT 19
+#define USB_PORT_FEAT_C_RESET        20
+#define USB_PORT_FEAT_TEST           21
+
+#endif	/* __DWCHW_H__ */
-- 
2.15.0



^ permalink raw reply related	[flat|nested] 2+ messages in thread

* Re: [PATCH] [edk2-platforms]: Adding usb Host driver support from OpenPlatformPkg hikey-wip branch
  2017-11-20 10:25 [PATCH] [edk2-platforms]: Adding usb Host driver support from OpenPlatformPkg hikey-wip branch kalyan-nagabhirava
@ 2017-11-25 15:00 ` Leif Lindholm
  0 siblings, 0 replies; 2+ messages in thread
From: Leif Lindholm @ 2017-11-25 15:00 UTC (permalink / raw)
  To: kalyan-nagabhirava
  Cc: edk2-devel, ard.biesheuvel, mark.gregotski, peter.griffin

Hi Kalyan,

This is a huge (and much appreciated) contribution.
However, in order to simplify reviewing, could you please:
1) Configure your edk2-platforms clone as described in
   https://github.com/tianocore/tianocore.github.io/wiki/Laszlo's-unkempt-git-guide-for-edk2-contributors-and-maintainers#contributor-workflow
   (step 5 onwards)
2) Split this patch up into
   1) DwUsbDxe
   2) DwUsbHostDxe
   3) HiKey-specific changes/additions.

It would probably also be worth cc:ing Jeremy Linton
(Jeremy.Linton@arm.com) on this set.

For some early high-level feedback:
* I see you have included UncachedMemoryAllocationLib under HiKey.
  We did delete that library for a reason - it does not really do what
  people seem to think it does.
  Ard: could you pitch in with a more suitable solution?
* The DwNonPci module is not really part of the generic driver, but
  something that could be integrated somewhere in the platform
  initialization (HiKeylib?).

Best Regards,

Leif

On Mon, Nov 20, 2017 at 03:55:44PM +0530, kalyan-nagabhirava wrote:
> Contributed-under: TianoCore Contribution Agreement 1.1
> Signed-off-by: kalyan-nagabhirava <kalyankumar.nagabhirava@linaro.org>
> ---
>  Platform/Hisilicon/HiKey/HiKey.dec                 |    4 +
>  Platform/Hisilicon/HiKey/HiKey.dsc                 |   11 +
>  Platform/Hisilicon/HiKey/HiKey.fdf                 |    3 +
>  .../Include/Library/UncachedMemoryAllocationLib.h  |  665 ++++++
>  .../Hisilicon/HiKey/Library/ArmDmaLib/ArmDmaLib.c  |  342 +++
>  .../HiKey/Library/ArmDmaLib/ArmDmaLib.inf          |   50 +
>  .../UncachedMemoryAllocationLib.c                  |  692 ++++++
>  .../UncachedMemoryAllocationLib.inf                |   45 +
>  Silicon/Synopsys/Usb/DwNonPci/DwNonPciUsbDxe.inf   |   47 +
>  Silicon/Synopsys/Usb/DwNonPci/InitController.c     |   37 +
>  Silicon/Synopsys/Usb/DwUsbDxe/ComponentName.c      |  244 ++
>  Silicon/Synopsys/Usb/DwUsbDxe/ComponentName.h      |  148 ++
>  Silicon/Synopsys/Usb/DwUsbDxe/DwUsbDxe.c           | 2324 ++++++++++++++++++++
>  Silicon/Synopsys/Usb/DwUsbDxe/DwUsbDxe.dec         |   42 +
>  Silicon/Synopsys/Usb/DwUsbDxe/DwUsbDxe.h           |  534 +++++
>  Silicon/Synopsys/Usb/DwUsbDxe/DwUsbDxe.inf         |   60 +
>  Silicon/Synopsys/Usb/DwUsbHostDxe/ComponentName.c  |  243 ++
>  Silicon/Synopsys/Usb/DwUsbHostDxe/ComponentName.h  |  148 ++
>  Silicon/Synopsys/Usb/DwUsbHostDxe/DwUsbHostDxe.c   | 2043 +++++++++++++++++
>  Silicon/Synopsys/Usb/DwUsbHostDxe/DwUsbHostDxe.h   |  121 +
>  Silicon/Synopsys/Usb/DwUsbHostDxe/DwUsbHostDxe.inf |   61 +
>  Silicon/Synopsys/Usb/DwUsbHostDxe/DwcHw.h          |  792 +++++++
>  22 files changed, 8656 insertions(+)
>  create mode 100644 Platform/Hisilicon/HiKey/Include/Library/UncachedMemoryAllocationLib.h
>  create mode 100644 Platform/Hisilicon/HiKey/Library/ArmDmaLib/ArmDmaLib.c
>  create mode 100644 Platform/Hisilicon/HiKey/Library/ArmDmaLib/ArmDmaLib.inf
>  create mode 100644 Platform/Hisilicon/HiKey/Library/UncachedMemoryAllocationLib/UncachedMemoryAllocationLib.c
>  create mode 100644 Platform/Hisilicon/HiKey/Library/UncachedMemoryAllocationLib/UncachedMemoryAllocationLib.inf
>  create mode 100644 Silicon/Synopsys/Usb/DwNonPci/DwNonPciUsbDxe.inf
>  create mode 100644 Silicon/Synopsys/Usb/DwNonPci/InitController.c
>  create mode 100644 Silicon/Synopsys/Usb/DwUsbDxe/ComponentName.c
>  create mode 100644 Silicon/Synopsys/Usb/DwUsbDxe/ComponentName.h
>  create mode 100644 Silicon/Synopsys/Usb/DwUsbDxe/DwUsbDxe.c
>  create mode 100644 Silicon/Synopsys/Usb/DwUsbDxe/DwUsbDxe.dec
>  create mode 100644 Silicon/Synopsys/Usb/DwUsbDxe/DwUsbDxe.h
>  create mode 100644 Silicon/Synopsys/Usb/DwUsbDxe/DwUsbDxe.inf
>  create mode 100644 Silicon/Synopsys/Usb/DwUsbHostDxe/ComponentName.c
>  create mode 100644 Silicon/Synopsys/Usb/DwUsbHostDxe/ComponentName.h
>  create mode 100644 Silicon/Synopsys/Usb/DwUsbHostDxe/DwUsbHostDxe.c
>  create mode 100644 Silicon/Synopsys/Usb/DwUsbHostDxe/DwUsbHostDxe.h
>  create mode 100644 Silicon/Synopsys/Usb/DwUsbHostDxe/DwUsbHostDxe.inf
>  create mode 100644 Silicon/Synopsys/Usb/DwUsbHostDxe/DwcHw.h


^ permalink raw reply	[flat|nested] 2+ messages in thread

end of thread, other threads:[~2017-11-25 14:56 UTC | newest]

Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2017-11-20 10:25 [PATCH] [edk2-platforms]: Adding usb Host driver support from OpenPlatformPkg hikey-wip branch kalyan-nagabhirava
2017-11-25 15:00 ` Leif Lindholm

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox