From: Leif Lindholm <leif.lindholm@linaro.org>
To: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: edk2-devel@lists.01.org, daniel.thompson@linaro.org,
methavanitpong.pipat@socionext.com, masahisa.kojima@linaro.org,
masami.hiramatsu@linaro.org
Subject: Re: [PATCH edk2-platforms v5 0/6] add remaining support for Socionext SynQuacer
Date: Sat, 25 Nov 2017 12:23:33 +0000 [thread overview]
Message-ID: <20171125122333.d2uzog5aefjcudij@bivouac.eciton.net> (raw)
In-Reply-To: <20171117190423.19511-1-ard.biesheuvel@linaro.org>
On Fri, Nov 17, 2017 at 07:04:17PM +0000, Ard Biesheuvel wrote:
> These are the remaining patches that still need review after the majority
> of the Socionext SynQuacer support patches were merged.
All remaining patches in series:
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
> Changes since v4:
> - minor changes, please see the notes in the individual patches
>
> Changes since v3:
> - remove ACPI support for now, we can add it on top if we manage to sort
> out all the SoC quirks that make it difficult to have full support under
> ACPI
> - add RTC support to DeveloperBox
> - add eMMC support to SynQuacerEvalBoard
> - incorporate review feedback on the SPI NOR driver (which was possible
> after noticing that I did in fact have a manual for this IP)
> - map NOR and EEPROM as writeback cacheable non-shareable; this allows the
> split FV hack to be reverted, and improves boot time considerably
> - some other minor changes have been applied, these have been added to the
> individual patches as notes
>
> Changes since v2:
> - converted NETSEC driver to UEFI driver model
> - added a platform DXE driver that declares the non-discoverable NETSEC
> device for the UEFI driver model driver to bind to
> - remove hardcoded DRAM information - everything is now retrieved from
> ARM Trusted Firmware
> - added DT descriptions of the GPIO and interrupt controller IP blocks
> - addressed various style issues and merge errors highlighted by Leif
>
> Ard Biesheuvel (6):
> Silicon/SynQuacer: implement 'clear NVRAM' feature using a DIP switch
> Silicon/SynQuacer: add DT description of the SDHCI controller
> Silicon/Socionext: implement I2C master protocol for SynQuacer I2C
> Silicon/NXP: add RTC support library for PCF8563 I2C IP
> Platform/DeveloperBox: wire up RTC support
> Platform/SynQuacerEvalBoard: add eMMC driver stack
>
> Platform/Socionext/DeveloperBox/DeveloperBox.dsc | 13 +-
> Platform/Socionext/DeveloperBox/DeveloperBox.fdf | 6 +
> Platform/Socionext/SynQuacerEvalBoard/SynQuacerEvalBoard.dsc | 12 +
> Platform/Socionext/SynQuacerEvalBoard/SynQuacerEvalBoard.fdf | 8 +
> Silicon/NXP/Library/Pcf8563RealTimeClockLib/Pcf8563RealTimeClockLib.c | 402 +++++++++++++
> Silicon/NXP/Library/Pcf8563RealTimeClockLib/Pcf8563RealTimeClockLib.dec | 31 ++
> Silicon/NXP/Library/Pcf8563RealTimeClockLib/Pcf8563RealTimeClockLib.inf | 52 ++
> Silicon/Socionext/SynQuacer/DeviceTree/SynQuacer.dtsi | 27 +
> Silicon/Socionext/SynQuacer/DeviceTree/SynQuacerEvalBoard.dts | 4 +
> Silicon/Socionext/SynQuacer/Drivers/PlatformDxe/Emmc.c | 201 +++++++
> Silicon/Socionext/SynQuacer/Drivers/PlatformDxe/PlatformDxe.c | 88 ++-
> Silicon/Socionext/SynQuacer/Drivers/PlatformDxe/PlatformDxe.h | 37 ++
> Silicon/Socionext/SynQuacer/Drivers/PlatformDxe/PlatformDxe.inf | 11 +-
> Silicon/Socionext/SynQuacer/Drivers/SynQuacerI2cDxe/ComponentName.c | 185 ++++++
> Silicon/Socionext/SynQuacer/Drivers/SynQuacerI2cDxe/DriverBinding.c | 238 ++++++++
> Silicon/Socionext/SynQuacer/Drivers/SynQuacerI2cDxe/SynQuacerI2cDxe.c | 588 ++++++++++++++++++++
> Silicon/Socionext/SynQuacer/Drivers/SynQuacerI2cDxe/SynQuacerI2cDxe.h | 162 ++++++
> Silicon/Socionext/SynQuacer/Drivers/SynQuacerI2cDxe/SynQuacerI2cDxe.inf | 59 ++
> Silicon/Socionext/SynQuacer/Include/Platform/MemoryMap.h | 8 +
> Silicon/Socionext/SynQuacer/Library/SynQuacerMemoryInitPeiLib/SynQuacerMemoryInitPeiLib.c | 4 +
> Silicon/Socionext/SynQuacer/Library/SynQuacerPlatformPeiLib/SynQuacerPlatformPeiLib.c | 30 +-
> Silicon/Socionext/SynQuacer/Library/SynQuacerPlatformPeiLib/SynQuacerPlatformPeiLib.inf | 6 +
> Silicon/Socionext/SynQuacer/SynQuacer.dec | 8 +
> 23 files changed, 2160 insertions(+), 20 deletions(-)
> create mode 100644 Silicon/NXP/Library/Pcf8563RealTimeClockLib/Pcf8563RealTimeClockLib.c
> create mode 100644 Silicon/NXP/Library/Pcf8563RealTimeClockLib/Pcf8563RealTimeClockLib.dec
> create mode 100644 Silicon/NXP/Library/Pcf8563RealTimeClockLib/Pcf8563RealTimeClockLib.inf
> create mode 100644 Silicon/Socionext/SynQuacer/Drivers/PlatformDxe/Emmc.c
> create mode 100644 Silicon/Socionext/SynQuacer/Drivers/PlatformDxe/PlatformDxe.h
> create mode 100644 Silicon/Socionext/SynQuacer/Drivers/SynQuacerI2cDxe/ComponentName.c
> create mode 100644 Silicon/Socionext/SynQuacer/Drivers/SynQuacerI2cDxe/DriverBinding.c
> create mode 100644 Silicon/Socionext/SynQuacer/Drivers/SynQuacerI2cDxe/SynQuacerI2cDxe.c
> create mode 100644 Silicon/Socionext/SynQuacer/Drivers/SynQuacerI2cDxe/SynQuacerI2cDxe.h
> create mode 100644 Silicon/Socionext/SynQuacer/Drivers/SynQuacerI2cDxe/SynQuacerI2cDxe.inf
>
> --
> 2.11.0
>
next prev parent reply other threads:[~2017-11-25 12:19 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-11-17 19:04 [PATCH edk2-platforms v5 0/6] add remaining support for Socionext SynQuacer Ard Biesheuvel
2017-11-17 19:04 ` [PATCH edk2-platforms v5 1/6] Silicon/SynQuacer: implement 'clear NVRAM' feature using a DIP switch Ard Biesheuvel
2017-11-25 12:17 ` Leif Lindholm
2017-11-17 19:04 ` [PATCH edk2-platforms v5 2/6] Silicon/SynQuacer: add DT description of the SDHCI controller Ard Biesheuvel
2017-11-17 19:04 ` [PATCH edk2-platforms v5 3/6] Silicon/Socionext: implement I2C master protocol for SynQuacer I2C Ard Biesheuvel
2017-11-17 19:04 ` [PATCH edk2-platforms v5 4/6] Silicon/NXP: add RTC support library for PCF8563 I2C IP Ard Biesheuvel
2017-11-17 19:04 ` [PATCH edk2-platforms v5 5/6] Platform/DeveloperBox: wire up RTC support Ard Biesheuvel
2017-11-17 19:04 ` [PATCH edk2-platforms v5 6/6] Platform/SynQuacerEvalBoard: add eMMC driver stack Ard Biesheuvel
2017-11-25 12:23 ` Leif Lindholm [this message]
2017-11-26 10:30 ` [PATCH edk2-platforms v5 0/6] add remaining support for Socionext SynQuacer Ard Biesheuvel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20171125122333.d2uzog5aefjcudij@bivouac.eciton.net \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox