From: Ard Biesheuvel <ard.biesheuvel@linaro.org>
To: edk2-devel@lists.01.org
Cc: leif.lindholm@linaro.org, Ard Biesheuvel <ard.biesheuvel@linaro.org>
Subject: [PATCH edk2-platforms] Silicon/SynQuacerPciHostBridgeLib: fix weird indentation
Date: Wed, 29 Nov 2017 18:35:05 +0000 [thread overview]
Message-ID: <20171129183505.7954-1-ard.biesheuvel@linaro.org> (raw)
Fix the weird indentation in the various #defines in the file containing
the RC init code. This is a whitespace only change.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
---
Silicon/Socionext/SynQuacer/Library/SynQuacerPciHostBridgeLib/SynQuacerPciHostBridgeLibConstructor.c | 138 ++++++++++----------
1 file changed, 69 insertions(+), 69 deletions(-)
diff --git a/Silicon/Socionext/SynQuacer/Library/SynQuacerPciHostBridgeLib/SynQuacerPciHostBridgeLibConstructor.c b/Silicon/Socionext/SynQuacer/Library/SynQuacerPciHostBridgeLib/SynQuacerPciHostBridgeLibConstructor.c
index 1bbef5b6cf98..6b42d3e29806 100644
--- a/Silicon/Socionext/SynQuacer/Library/SynQuacerPciHostBridgeLib/SynQuacerPciHostBridgeLibConstructor.c
+++ b/Silicon/Socionext/SynQuacer/Library/SynQuacerPciHostBridgeLib/SynQuacerPciHostBridgeLibConstructor.c
@@ -46,75 +46,75 @@
#define IATU_LWR_TARGET_ADDR_OFF_OUTBOUND_0 0x918
#define IATU_UPPER_TARGET_ADDR_OFF_OUTBOUND_0 0x91C
-#define CORE_CONTROL 0x000
-#define APP_LTSSM_ENABLE BIT4
-#define DEVICE_TYPE (BIT3 | BIT2 | BIT1 | BIT0)
-
-#define AXI_CLK_STOP 0x004
-#define DBI_ACLK_STOP BIT8
-#define SLV_ACLK_STOP BIT4
-#define MSTR_ACLK_STOP BIT0
-#define DBI_CSYSREQ_REG BIT9
-#define SLV_CSYSREQ_REG BIT5
-#define MSTR_CSYSREQ_REG BIT1
-
-#define RESET_CONTROL_1 0x00C
-#define PERST_N_O_REG BIT5
-#define PERST_N_I_REG BIT4
-#define BUTTON_RST_N_REG BIT1
-#define PWUP_RST_N_REG BIT0
-
-#define RESET_CONTROL_2 0x010
-
-#define RESET_SELECT_1 0x014
-#define SQU_RST_SEL BIT29
-#define PHY_RST_SEL BIT28
-#define PWR_RST_SEL BIT24
-#define STI_RST_SEL BIT20
-#define N_STI_RST_SEL BIT16
-#define CORE_RST_SEL BIT12
-#define PERST_SEL BIT4
-#define BUTTON_RST_SEL BIT1
-#define PWUP_RST_SEL BIT0
-
-#define RESET_SELECT_2 0x018
-#define DBI_ARST_SEL BIT8
-#define SLV_ARST_SEL BIT4
-#define MSTR_ARST_SEL BIT0
-
-#define EM_CONTROL 0x030
-#define PRE_DET_STT_REG BIT4
-
-#define EM_SELECT 0x034
-#define PRE_DET_STT_SEL BIT4
-
-#define PM_CONTROL_2 0x050
-#define SYS_AUX_PWR_DET BIT8
-
-#define PHY_CONFIG_COM_6 0x114
-#define PIPE_PORT_SEL (BIT1 | BIT0)
-
-#define LINK_MONITOR 0x210
-#define SMLH_LINK_UP BIT0
-
-#define LINK_CAPABILITIES_REG 0x07C
-#define PCIE_CAP_MAX_LINK_WIDTH (BIT7 | BIT6 | BIT5 | BIT4)
-#define PCIE_CAP_MAX_LINK_SPEED (BIT3 | BIT2 | BIT1 | BIT0)
-
-#define LINK_CONTROL_LINK_STATUS_REG 0x080
-#define PCIE_CAP_NEGO_LINK_WIDTH (BIT23 | BIT22 | BIT21 | BIT20)
-#define PCIE_CAP_LINK_SPEED (BIT19 | BIT18 | BIT17 | BIT16)
-
-#define TYPE1_CLASS_CODE_REV_ID_REG 0x008
-#define BASE_CLASS_CODE 0xFF000000
-#define BASE_CLASS_CODE_VALUE 0x06
-#define SUBCLASS_CODE 0x00FF0000
-#define SUBCLASS_CODE_VALUE 0x04
-#define PROGRAM_INTERFACE 0x0000FF00
-#define PROGRAM_INTERFACE_VALUE 0x00
-
-#define MISC_CONTROL_1_OFF 0x8BC
-#define DBI_RO_WR_EN BIT0
+#define CORE_CONTROL 0x000
+#define APP_LTSSM_ENABLE BIT4
+#define DEVICE_TYPE (BIT3 | BIT2 | BIT1 | BIT0)
+
+#define AXI_CLK_STOP 0x004
+#define DBI_ACLK_STOP BIT8
+#define SLV_ACLK_STOP BIT4
+#define MSTR_ACLK_STOP BIT0
+#define DBI_CSYSREQ_REG BIT9
+#define SLV_CSYSREQ_REG BIT5
+#define MSTR_CSYSREQ_REG BIT1
+
+#define RESET_CONTROL_1 0x00C
+#define PERST_N_O_REG BIT5
+#define PERST_N_I_REG BIT4
+#define BUTTON_RST_N_REG BIT1
+#define PWUP_RST_N_REG BIT0
+
+#define RESET_CONTROL_2 0x010
+
+#define RESET_SELECT_1 0x014
+#define SQU_RST_SEL BIT29
+#define PHY_RST_SEL BIT28
+#define PWR_RST_SEL BIT24
+#define STI_RST_SEL BIT20
+#define N_STI_RST_SEL BIT16
+#define CORE_RST_SEL BIT12
+#define PERST_SEL BIT4
+#define BUTTON_RST_SEL BIT1
+#define PWUP_RST_SEL BIT0
+
+#define RESET_SELECT_2 0x018
+#define DBI_ARST_SEL BIT8
+#define SLV_ARST_SEL BIT4
+#define MSTR_ARST_SEL BIT0
+
+#define EM_CONTROL 0x030
+#define PRE_DET_STT_REG BIT4
+
+#define EM_SELECT 0x034
+#define PRE_DET_STT_SEL BIT4
+
+#define PM_CONTROL_2 0x050
+#define SYS_AUX_PWR_DET BIT8
+
+#define PHY_CONFIG_COM_6 0x114
+#define PIPE_PORT_SEL (BIT1 | BIT0)
+
+#define LINK_MONITOR 0x210
+#define SMLH_LINK_UP BIT0
+
+#define LINK_CAPABILITIES_REG 0x07C
+#define PCIE_CAP_MAX_LINK_WIDTH (BIT7 | BIT6 | BIT5 | BIT4)
+#define PCIE_CAP_MAX_LINK_SPEED (BIT3 | BIT2 | BIT1 | BIT0)
+
+#define LINK_CONTROL_LINK_STATUS_REG 0x080
+#define PCIE_CAP_NEGO_LINK_WIDTH (BIT23 | BIT22 | BIT21 | BIT20)
+#define PCIE_CAP_LINK_SPEED (BIT19 | BIT18 | BIT17 | BIT16)
+
+#define TYPE1_CLASS_CODE_REV_ID_REG 0x008
+#define BASE_CLASS_CODE 0xFF000000
+#define BASE_CLASS_CODE_VALUE 0x06
+#define SUBCLASS_CODE 0x00FF0000
+#define SUBCLASS_CODE_VALUE 0x04
+#define PROGRAM_INTERFACE 0x0000FF00
+#define PROGRAM_INTERFACE_VALUE 0x00
+
+#define MISC_CONTROL_1_OFF 0x8BC
+#define DBI_RO_WR_EN BIT0
STATIC
VOID
--
2.11.0
next reply other threads:[~2017-11-29 18:30 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-11-29 18:35 Ard Biesheuvel [this message]
2017-11-29 19:14 ` [PATCH edk2-platforms] Silicon/SynQuacerPciHostBridgeLib: fix weird indentation Leif Lindholm
2017-11-29 19:24 ` Laszlo Ersek
2017-11-30 18:48 ` Ard Biesheuvel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20171129183505.7954-1-ard.biesheuvel@linaro.org \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox