From: Leif Lindholm <leif.lindholm@linaro.org>
To: Marcin Wojtas <mw@semihalf.com>
Cc: edk2-devel-01 <edk2-devel@lists.01.org>,
Ard Biesheuvel <ard.biesheuvel@linaro.org>,
nadavh@marvell.com, Neta Zur Hershkovits <neta@marvell.com>,
Kostya Porotchkin <kostap@marvell.com>,
Hua Jing <jinghua@marvell.com>,
semihalf-dabros-jan <jsd@semihalf.com>
Subject: Re: [platforms: PATCH v2 4/4] Marvell/Drivers: MvPhyDxe: Cleanup the header
Date: Mon, 4 Dec 2017 16:10:25 +0000 [thread overview]
Message-ID: <20171204161025.rslvdt5hldrs4rf4@bivouac.eciton.net> (raw)
In-Reply-To: <CAPv3WKe50JUh572e49Q1yASsO3r0SyL2igEiR0=DOc3XVHGiUQ@mail.gmail.com>
On Mon, Dec 04, 2017 at 04:22:33PM +0100, Marcin Wojtas wrote:
> Hi Leif,
>
>
>
> 2017-12-04 15:00 GMT+01:00 Leif Lindholm <leif.lindholm@linaro.org>:
> > On Fri, Dec 01, 2017 at 04:35:07PM +0100, Marcin Wojtas wrote:
> >> This patch removes unused macros defined in MvPhyDxe.h, as well
> >> as improves the style and comments. Pick single definition
> >> of the autonegotiation timeout - two different macros were used
> >> for the same purpose.
> >>
> >> Contributed-under: TianoCore Contribution Agreement 1.1
> >> Signed-off-by: Marcin Wojtas <mw@semihalf.com>
> >> ---
> >> Platform/Marvell/Drivers/Net/Phy/MvPhyDxe/MvPhyDxe.c | 2 +-
> >> Platform/Marvell/Drivers/Net/Phy/MvPhyDxe/MvPhyDxe.h | 152 ++++----------------
> >> 2 files changed, 31 insertions(+), 123 deletions(-)
> >>
> >> diff --git a/Platform/Marvell/Drivers/Net/Phy/MvPhyDxe/MvPhyDxe.c b/Platform/Marvell/Drivers/Net/Phy/MvPhyDxe/MvPhyDxe.c
> >> index e776a91..dd2edae 100644
> >> --- a/Platform/Marvell/Drivers/Net/Phy/MvPhyDxe/MvPhyDxe.c
> >> +++ b/Platform/Marvell/Drivers/Net/Phy/MvPhyDxe/MvPhyDxe.c
> >> @@ -328,7 +328,7 @@ MvPhyInit1512 (
> >>
> >> DEBUG((DEBUG_ERROR, "MvPhyDxe: Waiting for PHY auto negotiation... "));
> >> for (i = 0; !(Data & BMSR_ANEGCOMPLETE); i++) {
> >> - if (i > PHY_ANEG_TIMEOUT) {
> >> + if (i > PHY_AUTONEGOTIATE_TIMEOUT) {
> >
> > I think you've had a git accident somewhere:
> > The existing line upstream is still
> > if (i > PHY_AUTONEGOTIATE_TIMEOUT) {
> > This hunk should have just dropped out.
> >
>
> No, it's ok. It just turned out, there were two concurrent definitions
> of the same thing. Please take a look at what's available on top of
> the master branch:
Aah, that's not the same location as in your v1, is it? :)
*grumble*
Sure:
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
> Header:
> [...]
> #define PHY_ANEG_TIMEOUT 4000
>
> #define PHY_INTERFACE_MODE_RGMII 0
> #define PHY_INTERFACE_MODE_RGMII_ID 1
> #define PHY_INTERFACE_MODE_RGMII_RXID 2
> #define PHY_INTERFACE_MODE_RGMII_TXID 3
> #define PHY_INTERFACE_MODE_SGMII 4
> #define PHY_INTERFACE_MODE_RTBI 5
>
> #define PHY_AUTONEGOTIATE_TIMEOUT 5000
> [...]
>
> Driver:
> ~Line 204:
> DEBUG((DEBUG_ERROR,"MvPhyDxe: Waiting for PHY realtime link"));
> while (!(Data & MIIM_88E1xxx_PHYSTAT_SPDDONE)) {
> if (i > PHY_AUTONEGOTIATE_TIMEOUT) {
>
> ~Line 327:
> DEBUG((DEBUG_ERROR, "MvPhyDxe: Waiting for PHY auto negotiation... "));
> for (i = 0; !(Data & BMSR_ANEGCOMPLETE); i++) {
> if (i > PHY_ANEG_TIMEOUT) {
> DEBUG((DEBUG_ERROR, "timeout\n"));
>
> Best regards,
> Marcin
next prev parent reply other threads:[~2017-12-04 16:05 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-12-01 15:35 [platforms: PATCH v2 0/4] Armada 7k/8k - misc improvements pt.3 Marcin Wojtas
2017-12-01 15:35 ` [platforms: PATCH v2 1/4] Marvell/Armada: Switch to dynamic tftp command Marcin Wojtas
2017-12-04 13:32 ` Leif Lindholm
2017-12-04 15:04 ` Marcin Wojtas
2017-12-01 15:35 ` [platforms: PATCH v2 2/4] Marvell/Armada: Fix watchdog control base Marcin Wojtas
2017-12-01 15:35 ` [platforms: PATCH v2 3/4] Marvell/Applications: FirmwareUpdate: Fix usage information Marcin Wojtas
2017-12-04 13:52 ` Leif Lindholm
2017-12-04 15:15 ` Marcin Wojtas
2017-12-01 15:35 ` [platforms: PATCH v2 4/4] Marvell/Drivers: MvPhyDxe: Cleanup the header Marcin Wojtas
2017-12-04 14:00 ` Leif Lindholm
2017-12-04 15:22 ` Marcin Wojtas
2017-12-04 16:10 ` Leif Lindholm [this message]
2017-12-04 16:35 ` Marcin Wojtas
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20171204161025.rslvdt5hldrs4rf4@bivouac.eciton.net \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox