From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received-SPF: Pass (sender SPF authorized) identity=mailfrom; client-ip=2a00:1450:400c:c0c::229; helo=mail-wr0-x229.google.com; envelope-from=ard.biesheuvel@linaro.org; receiver=edk2-devel@lists.01.org Received: from mail-wr0-x229.google.com (mail-wr0-x229.google.com [IPv6:2a00:1450:400c:c0c::229]) (using TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits)) (No client certificate requested) by ml01.01.org (Postfix) with ESMTPS id C74CA20359E96 for ; Mon, 4 Dec 2017 14:18:37 -0800 (PST) Received: by mail-wr0-x229.google.com with SMTP id q9so18989845wre.7 for ; Mon, 04 Dec 2017 14:23:07 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; h=from:to:cc:subject:date:message-id:in-reply-to:references; bh=THoPk4NtQwshgtltQhm36rQHgZFUqU6CCcj4/P2VIT0=; b=EIkIdGf3zLBLUw1eIMTDdEQS9QDohL+ElwmeWcEu8f9EQleDOHaasNG3P6y2/TCgLc VKOnhByEy+pu0XWVM5ulm3BodQUmSrsIkELAcVDKfQg15mbErlLdbwSjuZZlQlN+iqG6 O2F9iqeIsg2TDOpyIoGa7Lztb26ArQ+2lVK7g= X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:from:to:cc:subject:date:message-id:in-reply-to :references; bh=THoPk4NtQwshgtltQhm36rQHgZFUqU6CCcj4/P2VIT0=; b=ZpTm6FnXL2rZMPrfn6X7d87MSMB3s971kHMbzWA0sdwV856+xx6/CWA4g4xnoppaT5 AMIxht2C7XvxZuEmyIcOQ9FnCB232QLCF+gDWq/e7oX3ny8H+lm+NlRMVz0H93Epx+dv veUag11rTrNSy50qWP80p9a7riSgn8gDA2RdxxwThiOG9fekjmQihoxMU1StfET8S9Ev HI0aMmNfcX24cJzAuJy11zMlypAgKTiGE9ZhawsNoheOhFSRjTTYk6ZOx6o51rnJMSqu ziAO7EEcsJJJaF3NLAWk7eAU5uCFhZ/uU+G0cX/l8DLkg1YDkBidIpjm07gmcN3RpMqZ UB0A== X-Gm-Message-State: AJaThX65K7myWTPbIBbnmIfIXOVpxiMVFIQlivrLieX9eevK24eNCsNH T9f0kAObdcb4Bd2nnbX38GnUhDx3W4A= X-Google-Smtp-Source: AGs4zMZ1sHDgQP3gh2uYn5ef79JiKzjhePEUkDD/1fOjefxX784TDEsP9N+MfVKWbBBNU/GLao1Vig== X-Received: by 10.223.201.138 with SMTP id f10mr14113868wrh.9.1512426185848; Mon, 04 Dec 2017 14:23:05 -0800 (PST) Received: from localhost.localdomain ([105.150.171.234]) by smtp.gmail.com with ESMTPSA id x133sm5667961wmd.44.2017.12.04.14.23.03 (version=TLS1_2 cipher=ECDHE-RSA-AES128-GCM-SHA256 bits=128/128); Mon, 04 Dec 2017 14:23:05 -0800 (PST) From: Ard Biesheuvel To: edk2-devel@lists.01.org Cc: leif.lindholm@linaro.org, Ard Biesheuvel Date: Mon, 4 Dec 2017 22:22:35 +0000 Message-Id: <20171204222243.15950-6-ard.biesheuvel@linaro.org> X-Mailer: git-send-email 2.11.0 In-Reply-To: <20171204222243.15950-1-ard.biesheuvel@linaro.org> References: <20171204222243.15950-1-ard.biesheuvel@linaro.org> Subject: [PATCH v2 05/13] ArmPlatformPkg: remove old PL011UartLib implementation X-BeenThere: edk2-devel@lists.01.org X-Mailman-Version: 2.1.22 Precedence: list List-Id: EDK II Development List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 04 Dec 2017 22:18:38 -0000 Remove the PL011UartLib implementation that has been superseded by the one under Library/ Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Ard Biesheuvel --- ArmPlatformPkg/Drivers/PL011Uart/PL011Uart.c | 470 -------------------- ArmPlatformPkg/Drivers/PL011Uart/PL011Uart.inf | 42 -- ArmPlatformPkg/Include/Drivers/PL011Uart.h | 290 ------------ 3 files changed, 802 deletions(-) diff --git a/ArmPlatformPkg/Drivers/PL011Uart/PL011Uart.c b/ArmPlatformPkg/Drivers/PL011Uart/PL011Uart.c deleted file mode 100644 index 77630237ae91..000000000000 --- a/ArmPlatformPkg/Drivers/PL011Uart/PL011Uart.c +++ /dev/null @@ -1,470 +0,0 @@ -/** @file - Serial I/O Port library functions with no library constructor/destructor - - Copyright (c) 2008 - 2010, Apple Inc. All rights reserved.
- Copyright (c) 2011 - 2016, ARM Ltd. All rights reserved.
- - This program and the accompanying materials - are licensed and made available under the terms and conditions of the BSD License - which accompanies this distribution. The full text of the license may be found at - http://opensource.org/licenses/bsd-license.php - - THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, - WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. - -**/ - -#include -#include -#include - -#include - -#define FRACTION_PART_SIZE_IN_BITS 6 -#define FRACTION_PART_MASK ((1 << FRACTION_PART_SIZE_IN_BITS) - 1) - -// -// EFI_SERIAL_SOFTWARE_LOOPBACK_ENABLE is the only -// control bit that is not supported. -// -STATIC CONST UINT32 mInvalidControlBits = EFI_SERIAL_SOFTWARE_LOOPBACK_ENABLE; - -/** - - Initialise the serial port to the specified settings. - The serial port is re-configured only if the specified settings - are different from the current settings. - All unspecified settings will be set to the default values. - - @param UartBase The base address of the serial device. - @param UartClkInHz The clock in Hz for the serial device. - Ignored if the PCD PL011UartInteger is not 0 - @param BaudRate The baud rate of the serial device. If the - baud rate is not supported, the speed will be - reduced to the nearest supported one and the - variable's value will be updated accordingly. - @param ReceiveFifoDepth The number of characters the device will - buffer on input. Value of 0 will use the - device's default FIFO depth. - @param Parity If applicable, this is the EFI_PARITY_TYPE - that is computed or checked as each character - is transmitted or received. If the device - does not support parity, the value is the - default parity value. - @param DataBits The number of data bits in each character. - @param StopBits If applicable, the EFI_STOP_BITS_TYPE number - of stop bits per character. - If the device does not support stop bits, the - value is the default stop bit value. - - @retval RETURN_SUCCESS All attributes were set correctly on the - serial device. - @retval RETURN_INVALID_PARAMETER One or more of the attributes has an - unsupported value. - -**/ -RETURN_STATUS -EFIAPI -PL011UartInitializePort ( - IN UINTN UartBase, - IN UINT32 UartClkInHz, - IN OUT UINT64 *BaudRate, - IN OUT UINT32 *ReceiveFifoDepth, - IN OUT EFI_PARITY_TYPE *Parity, - IN OUT UINT8 *DataBits, - IN OUT EFI_STOP_BITS_TYPE *StopBits - ) -{ - UINT32 LineControl; - UINT32 Divisor; - UINT32 Integer; - UINT32 Fractional; - UINT32 HardwareFifoDepth; - - HardwareFifoDepth = (PL011_UARTPID2_VER (MmioRead32 (UartBase + UARTPID2)) \ - > PL011_VER_R1P4) \ - ? 32 : 16 ; - // The PL011 supports a buffer of 1, 16 or 32 chars. Therefore we can accept - // 1 char buffer as the minimum FIFO size. Because everything can be rounded - // down, there is no maximum FIFO size. - if ((*ReceiveFifoDepth == 0) || (*ReceiveFifoDepth >= HardwareFifoDepth)) { - // Enable FIFO - LineControl = PL011_UARTLCR_H_FEN; - *ReceiveFifoDepth = HardwareFifoDepth; - } else { - // Disable FIFO - LineControl = 0; - // Nothing else to do. 1 byte FIFO is default. - *ReceiveFifoDepth = 1; - } - - // - // Parity - // - switch (*Parity) { - case DefaultParity: - *Parity = NoParity; - case NoParity: - // Nothing to do. Parity is disabled by default. - break; - case EvenParity: - LineControl |= (PL011_UARTLCR_H_PEN | PL011_UARTLCR_H_EPS); - break; - case OddParity: - LineControl |= PL011_UARTLCR_H_PEN; - break; - case MarkParity: - LineControl |= ( PL011_UARTLCR_H_PEN \ - | PL011_UARTLCR_H_SPS \ - | PL011_UARTLCR_H_EPS); - break; - case SpaceParity: - LineControl |= (PL011_UARTLCR_H_PEN | PL011_UARTLCR_H_SPS); - break; - default: - return RETURN_INVALID_PARAMETER; - } - - // - // Data Bits - // - switch (*DataBits) { - case 0: - *DataBits = 8; - case 8: - LineControl |= PL011_UARTLCR_H_WLEN_8; - break; - case 7: - LineControl |= PL011_UARTLCR_H_WLEN_7; - break; - case 6: - LineControl |= PL011_UARTLCR_H_WLEN_6; - break; - case 5: - LineControl |= PL011_UARTLCR_H_WLEN_5; - break; - default: - return RETURN_INVALID_PARAMETER; - } - - // - // Stop Bits - // - switch (*StopBits) { - case DefaultStopBits: - *StopBits = OneStopBit; - case OneStopBit: - // Nothing to do. One stop bit is enabled by default. - break; - case TwoStopBits: - LineControl |= PL011_UARTLCR_H_STP2; - break; - case OneFiveStopBits: - // Only 1 or 2 stop bits are supported - default: - return RETURN_INVALID_PARAMETER; - } - - // Don't send the LineControl value to the PL011 yet, - // wait until after the Baud Rate setting. - // This ensures we do not mess up the UART settings halfway through - // in the rare case when there is an error with the Baud Rate. - - // - // Baud Rate - // - - // If PL011 Integer value has been defined then always ignore the BAUD rate - if (FixedPcdGet32 (PL011UartInteger) != 0) { - Integer = FixedPcdGet32 (PL011UartInteger); - Fractional = FixedPcdGet32 (PL011UartFractional); - } else { - // If BAUD rate is zero then replace it with the system default value - if (*BaudRate == 0) { - *BaudRate = FixedPcdGet32 (PcdSerialBaudRate); - if (*BaudRate == 0) { - return RETURN_INVALID_PARAMETER; - } - } - if (0 == UartClkInHz) { - return RETURN_INVALID_PARAMETER; - } - - Divisor = (UartClkInHz * 4) / *BaudRate; - Integer = Divisor >> FRACTION_PART_SIZE_IN_BITS; - Fractional = Divisor & FRACTION_PART_MASK; - } - - // - // If PL011 is already initialized, check the current settings - // and re-initialize only if the settings are different. - // - if (((MmioRead32 (UartBase + UARTCR) & PL011_UARTCR_UARTEN) != 0) && - (MmioRead32 (UartBase + UARTLCR_H) == LineControl) && - (MmioRead32 (UartBase + UARTIBRD) == Integer) && - (MmioRead32 (UartBase + UARTFBRD) == Fractional)) { - // Nothing to do - already initialized with correct attributes - return RETURN_SUCCESS; - } - - // Wait for the end of transmission - while ((MmioRead32 (UartBase + UARTFR) & PL011_UARTFR_TXFE) == 0); - - // Disable UART: "The UARTLCR_H, UARTIBRD, and UARTFBRD registers must not be changed - // when the UART is enabled" - MmioWrite32 (UartBase + UARTCR, 0); - - // Set Baud Rate Registers - MmioWrite32 (UartBase + UARTIBRD, Integer); - MmioWrite32 (UartBase + UARTFBRD, Fractional); - - // No parity, 1 stop, no fifo, 8 data bits - MmioWrite32 (UartBase + UARTLCR_H, LineControl); - - // Clear any pending errors - MmioWrite32 (UartBase + UARTECR, 0); - - // Enable Tx, Rx, and UART overall - MmioWrite32 (UartBase + UARTCR, - PL011_UARTCR_RXE | PL011_UARTCR_TXE | PL011_UARTCR_UARTEN); - - return RETURN_SUCCESS; -} - -/** - - Assert or deassert the control signals on a serial port. - The following control signals are set according their bit settings : - . Request to Send - . Data Terminal Ready - - @param[in] UartBase UART registers base address - @param[in] Control The following bits are taken into account : - . EFI_SERIAL_REQUEST_TO_SEND : assert/deassert the - "Request To Send" control signal if this bit is - equal to one/zero. - . EFI_SERIAL_DATA_TERMINAL_READY : assert/deassert - the "Data Terminal Ready" control signal if this - bit is equal to one/zero. - . EFI_SERIAL_HARDWARE_LOOPBACK_ENABLE : enable/disable - the hardware loopback if this bit is equal to - one/zero. - . EFI_SERIAL_SOFTWARE_LOOPBACK_ENABLE : not supported. - . EFI_SERIAL_HARDWARE_FLOW_CONTROL_ENABLE : enable/ - disable the hardware flow control based on CTS (Clear - To Send) and RTS (Ready To Send) control signals. - - @retval RETURN_SUCCESS The new control bits were set on the device. - @retval RETURN_UNSUPPORTED The device does not support this operation. - -**/ -RETURN_STATUS -EFIAPI -PL011UartSetControl ( - IN UINTN UartBase, - IN UINT32 Control - ) -{ - UINT32 Bits; - - if (Control & (mInvalidControlBits)) { - return RETURN_UNSUPPORTED; - } - - Bits = MmioRead32 (UartBase + UARTCR); - - if (Control & EFI_SERIAL_REQUEST_TO_SEND) { - Bits |= PL011_UARTCR_RTS; - } else { - Bits &= ~PL011_UARTCR_RTS; - } - - if (Control & EFI_SERIAL_DATA_TERMINAL_READY) { - Bits |= PL011_UARTCR_DTR; - } else { - Bits &= ~PL011_UARTCR_DTR; - } - - if (Control & EFI_SERIAL_HARDWARE_LOOPBACK_ENABLE) { - Bits |= PL011_UARTCR_LBE; - } else { - Bits &= ~PL011_UARTCR_LBE; - } - - if (Control & EFI_SERIAL_HARDWARE_FLOW_CONTROL_ENABLE) { - Bits |= (PL011_UARTCR_CTSEN | PL011_UARTCR_RTSEN); - } else { - Bits &= ~(PL011_UARTCR_CTSEN | PL011_UARTCR_RTSEN); - } - - MmioWrite32 (UartBase + UARTCR, Bits); - - return RETURN_SUCCESS; -} - -/** - - Retrieve the status of the control bits on a serial device. - - @param[in] UartBase UART registers base address - @param[out] Control Status of the control bits on a serial device : - - . EFI_SERIAL_DATA_CLEAR_TO_SEND, - EFI_SERIAL_DATA_SET_READY, - EFI_SERIAL_RING_INDICATE, - EFI_SERIAL_CARRIER_DETECT, - EFI_SERIAL_REQUEST_TO_SEND, - EFI_SERIAL_DATA_TERMINAL_READY - are all related to the DTE (Data Terminal Equipment) - and DCE (Data Communication Equipment) modes of - operation of the serial device. - . EFI_SERIAL_INPUT_BUFFER_EMPTY : equal to one if the - receive buffer is empty, 0 otherwise. - . EFI_SERIAL_OUTPUT_BUFFER_EMPTY : equal to one if the - transmit buffer is empty, 0 otherwise. - . EFI_SERIAL_HARDWARE_LOOPBACK_ENABLE : equal to one if - the hardware loopback is enabled (the ouput feeds the - receive buffer), 0 otherwise. - . EFI_SERIAL_SOFTWARE_LOOPBACK_ENABLE : equal to one if - a loopback is accomplished by software, 0 otherwise. - . EFI_SERIAL_HARDWARE_FLOW_CONTROL_ENABLE : equal to - one if the hardware flow control based on CTS (Clear - To Send) and RTS (Ready To Send) control signals is - enabled, 0 otherwise. - - @retval RETURN_SUCCESS The control bits were read from the serial device. - -**/ -RETURN_STATUS -EFIAPI -PL011UartGetControl ( - IN UINTN UartBase, - OUT UINT32 *Control - ) -{ - UINT32 FlagRegister; - UINT32 ControlRegister; - - - FlagRegister = MmioRead32 (UartBase + UARTFR); - ControlRegister = MmioRead32 (UartBase + UARTCR); - - *Control = 0; - - if ((FlagRegister & PL011_UARTFR_CTS) == PL011_UARTFR_CTS) { - *Control |= EFI_SERIAL_CLEAR_TO_SEND; - } - - if ((FlagRegister & PL011_UARTFR_DSR) == PL011_UARTFR_DSR) { - *Control |= EFI_SERIAL_DATA_SET_READY; - } - - if ((FlagRegister & PL011_UARTFR_RI) == PL011_UARTFR_RI) { - *Control |= EFI_SERIAL_RING_INDICATE; - } - - if ((FlagRegister & PL011_UARTFR_DCD) == PL011_UARTFR_DCD) { - *Control |= EFI_SERIAL_CARRIER_DETECT; - } - - if ((ControlRegister & PL011_UARTCR_RTS) == PL011_UARTCR_RTS) { - *Control |= EFI_SERIAL_REQUEST_TO_SEND; - } - - if ((ControlRegister & PL011_UARTCR_DTR) == PL011_UARTCR_DTR) { - *Control |= EFI_SERIAL_DATA_TERMINAL_READY; - } - - if ((FlagRegister & PL011_UARTFR_RXFE) == PL011_UARTFR_RXFE) { - *Control |= EFI_SERIAL_INPUT_BUFFER_EMPTY; - } - - if ((FlagRegister & PL011_UARTFR_TXFE) == PL011_UARTFR_TXFE) { - *Control |= EFI_SERIAL_OUTPUT_BUFFER_EMPTY; - } - - if ((ControlRegister & (PL011_UARTCR_CTSEN | PL011_UARTCR_RTSEN)) - == (PL011_UARTCR_CTSEN | PL011_UARTCR_RTSEN)) { - *Control |= EFI_SERIAL_HARDWARE_FLOW_CONTROL_ENABLE; - } - - if ((ControlRegister & PL011_UARTCR_LBE) == PL011_UARTCR_LBE) { - *Control |= EFI_SERIAL_HARDWARE_LOOPBACK_ENABLE; - } - - return RETURN_SUCCESS; -} - -/** - Write data to serial device. - - @param Buffer Point of data buffer which need to be written. - @param NumberOfBytes Number of output bytes which are cached in Buffer. - - @retval 0 Write data failed. - @retval !0 Actual number of bytes written to serial device. - -**/ -UINTN -EFIAPI -PL011UartWrite ( - IN UINTN UartBase, - IN UINT8 *Buffer, - IN UINTN NumberOfBytes - ) -{ - UINT8* CONST Final = &Buffer[NumberOfBytes]; - - while (Buffer < Final) { - // Wait until UART able to accept another char - while ((MmioRead32 (UartBase + UARTFR) & UART_TX_FULL_FLAG_MASK)); - - MmioWrite8 (UartBase + UARTDR, *Buffer++); - } - - return NumberOfBytes; -} - -/** - Read data from serial device and save the data in buffer. - - @param Buffer Point of data buffer which need to be written. - @param NumberOfBytes Number of output bytes which are cached in Buffer. - - @retval 0 Read data failed. - @retval !0 Actual number of bytes read from serial device. - -**/ -UINTN -EFIAPI -PL011UartRead ( - IN UINTN UartBase, - OUT UINT8 *Buffer, - IN UINTN NumberOfBytes - ) -{ - UINTN Count; - - for (Count = 0; Count < NumberOfBytes; Count++, Buffer++) { - while ((MmioRead32 (UartBase + UARTFR) & UART_RX_EMPTY_FLAG_MASK) != 0); - *Buffer = MmioRead8 (UartBase + UARTDR); - } - - return NumberOfBytes; -} - -/** - Check to see if any data is available to be read from the debug device. - - @retval TRUE At least one byte of data is available to be read - @retval FALSE No data is available to be read - -**/ -BOOLEAN -EFIAPI -PL011UartPoll ( - IN UINTN UartBase - ) -{ - return ((MmioRead32 (UartBase + UARTFR) & UART_RX_EMPTY_FLAG_MASK) == 0); -} diff --git a/ArmPlatformPkg/Drivers/PL011Uart/PL011Uart.inf b/ArmPlatformPkg/Drivers/PL011Uart/PL011Uart.inf deleted file mode 100644 index 3fd4602a2578..000000000000 --- a/ArmPlatformPkg/Drivers/PL011Uart/PL011Uart.inf +++ /dev/null @@ -1,42 +0,0 @@ -#/** @file -# -# Component description file for PL011Uart module -# -# Copyright (c) 2011-2016, ARM Ltd. All rights reserved.
-# -# This program and the accompanying materials -# are licensed and made available under the terms and conditions of the BSD License -# which accompanies this distribution. The full text of the license may be found at -# http://opensource.org/licenses/bsd-license.php -# -# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, -# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. -# -#**/ - -[Defines] - INF_VERSION = 0x00010005 - BASE_NAME = PL011Uart - FILE_GUID = 4ec8b120-8307-11e0-bc91-0002a5d5c51b - MODULE_TYPE = BASE - VERSION_STRING = 1.0 - LIBRARY_CLASS = PL011UartLib - -[Sources.common] - PL011Uart.c - -[LibraryClasses] - DebugLib - IoLib - -[Packages] - MdePkg/MdePkg.dec - MdeModulePkg/MdeModulePkg.dec - ArmPlatformPkg/ArmPlatformPkg.dec - -[FixedPcd] - gEfiMdeModulePkgTokenSpaceGuid.PcdSerialBaudRate - - gArmPlatformTokenSpaceGuid.PL011UartInteger - gArmPlatformTokenSpaceGuid.PL011UartFractional - gArmPlatformTokenSpaceGuid.PL011UartRegOffsetVariant diff --git a/ArmPlatformPkg/Include/Drivers/PL011Uart.h b/ArmPlatformPkg/Include/Drivers/PL011Uart.h deleted file mode 100644 index 4957dbf85846..000000000000 --- a/ArmPlatformPkg/Include/Drivers/PL011Uart.h +++ /dev/null @@ -1,290 +0,0 @@ -/** @file -* -* Copyright (c) 2011-2016, ARM Limited. All rights reserved. -* -* This program and the accompanying materials -* are licensed and made available under the terms and conditions of the BSD License -* which accompanies this distribution. The full text of the license may be found at -* http://opensource.org/licenses/bsd-license.php -* -* THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, -* WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. -* -**/ - -#ifndef __PL011_UART_H__ -#define __PL011_UART_H__ - -#include -#include - -#define PL011_VARIANT_ZTE 1 - -// PL011 Registers -#if FixedPcdGet8 (PL011UartRegOffsetVariant) == PL011_VARIANT_ZTE -#define UARTDR 0x004 -#define UARTRSR 0x010 -#define UARTECR 0x010 -#define UARTFR 0x014 -#define UARTIBRD 0x024 -#define UARTFBRD 0x028 -#define UARTLCR_H 0x030 -#define UARTCR 0x034 -#define UARTIFLS 0x038 -#define UARTIMSC 0x040 -#define UARTRIS 0x044 -#define UARTMIS 0x048 -#define UARTICR 0x04c -#define UARTDMACR 0x050 -#else -#define UARTDR 0x000 -#define UARTRSR 0x004 -#define UARTECR 0x004 -#define UARTFR 0x018 -#define UARTILPR 0x020 -#define UARTIBRD 0x024 -#define UARTFBRD 0x028 -#define UARTLCR_H 0x02C -#define UARTCR 0x030 -#define UARTIFLS 0x034 -#define UARTIMSC 0x038 -#define UARTRIS 0x03C -#define UARTMIS 0x040 -#define UARTICR 0x044 -#define UARTDMACR 0x048 -#endif - -#define UARTPID0 0xFE0 -#define UARTPID1 0xFE4 -#define UARTPID2 0xFE8 -#define UARTPID3 0xFEC - -// Data status bits -#define UART_DATA_ERROR_MASK 0x0F00 - -// Status reg bits -#define UART_STATUS_ERROR_MASK 0x0F - -// Flag reg bits -#if FixedPcdGet8 (PL011UartRegOffsetVariant) == PL011_VARIANT_ZTE -#define PL011_UARTFR_RI (1 << 0) // Ring indicator -#define PL011_UARTFR_TXFE (1 << 7) // Transmit FIFO empty -#define PL011_UARTFR_RXFF (1 << 6) // Receive FIFO full -#define PL011_UARTFR_TXFF (1 << 5) // Transmit FIFO full -#define PL011_UARTFR_RXFE (1 << 4) // Receive FIFO empty -#define PL011_UARTFR_BUSY (1 << 8) // UART busy -#define PL011_UARTFR_DCD (1 << 2) // Data carrier detect -#define PL011_UARTFR_DSR (1 << 3) // Data set ready -#define PL011_UARTFR_CTS (1 << 1) // Clear to send -#else -#define PL011_UARTFR_RI (1 << 8) // Ring indicator -#define PL011_UARTFR_TXFE (1 << 7) // Transmit FIFO empty -#define PL011_UARTFR_RXFF (1 << 6) // Receive FIFO full -#define PL011_UARTFR_TXFF (1 << 5) // Transmit FIFO full -#define PL011_UARTFR_RXFE (1 << 4) // Receive FIFO empty -#define PL011_UARTFR_BUSY (1 << 3) // UART busy -#define PL011_UARTFR_DCD (1 << 2) // Data carrier detect -#define PL011_UARTFR_DSR (1 << 1) // Data set ready -#define PL011_UARTFR_CTS (1 << 0) // Clear to send -#endif - -// Flag reg bits - alternative names -#define UART_TX_EMPTY_FLAG_MASK PL011_UARTFR_TXFE -#define UART_RX_FULL_FLAG_MASK PL011_UARTFR_RXFF -#define UART_TX_FULL_FLAG_MASK PL011_UARTFR_TXFF -#define UART_RX_EMPTY_FLAG_MASK PL011_UARTFR_RXFE -#define UART_BUSY_FLAG_MASK PL011_UARTFR_BUSY - -// Control reg bits -#define PL011_UARTCR_CTSEN (1 << 15) // CTS hardware flow control enable -#define PL011_UARTCR_RTSEN (1 << 14) // RTS hardware flow control enable -#define PL011_UARTCR_RTS (1 << 11) // Request to send -#define PL011_UARTCR_DTR (1 << 10) // Data transmit ready. -#define PL011_UARTCR_RXE (1 << 9) // Receive enable -#define PL011_UARTCR_TXE (1 << 8) // Transmit enable -#define PL011_UARTCR_LBE (1 << 7) // Loopback enable -#define PL011_UARTCR_UARTEN (1 << 0) // UART Enable - -// Line Control Register Bits -#define PL011_UARTLCR_H_SPS (1 << 7) // Stick parity select -#define PL011_UARTLCR_H_WLEN_8 (3 << 5) -#define PL011_UARTLCR_H_WLEN_7 (2 << 5) -#define PL011_UARTLCR_H_WLEN_6 (1 << 5) -#define PL011_UARTLCR_H_WLEN_5 (0 << 5) -#define PL011_UARTLCR_H_FEN (1 << 4) // FIFOs Enable -#define PL011_UARTLCR_H_STP2 (1 << 3) // Two stop bits select -#define PL011_UARTLCR_H_EPS (1 << 2) // Even parity select -#define PL011_UARTLCR_H_PEN (1 << 1) // Parity Enable -#define PL011_UARTLCR_H_BRK (1 << 0) // Send break - -#define PL011_UARTPID2_VER(X) (((X) >> 4) & 0xF) -#define PL011_VER_R1P4 0x2 - -/** - - Initialise the serial port to the specified settings. - All unspecified settings will be set to the default values. - - @param[in] UartBase The base address of the serial device. - @param[in] UartClkInHz The clock in Hz for the serial device. - Ignored if the PCD PL011UartInteger is not 0 - @param[in out] BaudRate The baud rate of the serial device. If the - baud rate is not supported, the speed will be - reduced to the nearest supported one and the - variable's value will be updated accordingly. - @param[in out] ReceiveFifoDepth The number of characters the device will - buffer on input. Value of 0 will use the - device's default FIFO depth. - @param[in out] Parity If applicable, this is the EFI_PARITY_TYPE - that is computed or checked as each character - is transmitted or received. If the device - does not support parity, the value is the - default parity value. - @param[in out] DataBits The number of data bits in each character. - @param[in out] StopBits If applicable, the EFI_STOP_BITS_TYPE number - of stop bits per character. - If the device does not support stop bits, the - value is the default stop bit value. - - @retval RETURN_SUCCESS All attributes were set correctly on the - serial device. - @retval RETURN_INVALID_PARAMETER One or more of the attributes has an - unsupported value. - -**/ -RETURN_STATUS -EFIAPI -PL011UartInitializePort ( - IN UINTN UartBase, - IN UINT32 UartClkInHz, - IN OUT UINT64 *BaudRate, - IN OUT UINT32 *ReceiveFifoDepth, - IN OUT EFI_PARITY_TYPE *Parity, - IN OUT UINT8 *DataBits, - IN OUT EFI_STOP_BITS_TYPE *StopBits - ); - -/** - - Assert or deassert the control signals on a serial port. - The following control signals are set according their bit settings : - . Request to Send - . Data Terminal Ready - - @param[in] UartBase UART registers base address - @param[in] Control The following bits are taken into account : - . EFI_SERIAL_REQUEST_TO_SEND : assert/deassert the - "Request To Send" control signal if this bit is - equal to one/zero. - . EFI_SERIAL_DATA_TERMINAL_READY : assert/deassert - the "Data Terminal Ready" control signal if this - bit is equal to one/zero. - . EFI_SERIAL_HARDWARE_LOOPBACK_ENABLE : enable/disable - the hardware loopback if this bit is equal to - one/zero. - . EFI_SERIAL_SOFTWARE_LOOPBACK_ENABLE : not supported. - . EFI_SERIAL_HARDWARE_FLOW_CONTROL_ENABLE : enable/ - disable the hardware flow control based on CTS (Clear - To Send) and RTS (Ready To Send) control signals. - - @retval RETURN_SUCCESS The new control bits were set on the device. - @retval RETURN_UNSUPPORTED The device does not support this operation. - -**/ -RETURN_STATUS -EFIAPI -PL011UartSetControl ( - IN UINTN UartBase, - IN UINT32 Control - ); - -/** - - Retrieve the status of the control bits on a serial device. - - @param[in] UartBase UART registers base address - @param[out] Control Status of the control bits on a serial device : - - . EFI_SERIAL_DATA_CLEAR_TO_SEND, - EFI_SERIAL_DATA_SET_READY, - EFI_SERIAL_RING_INDICATE, - EFI_SERIAL_CARRIER_DETECT, - EFI_SERIAL_REQUEST_TO_SEND, - EFI_SERIAL_DATA_TERMINAL_READY - are all related to the DTE (Data Terminal Equipment) - and DCE (Data Communication Equipment) modes of - operation of the serial device. - . EFI_SERIAL_INPUT_BUFFER_EMPTY : equal to one if the - receive buffer is empty, 0 otherwise. - . EFI_SERIAL_OUTPUT_BUFFER_EMPTY : equal to one if the - transmit buffer is empty, 0 otherwise. - . EFI_SERIAL_HARDWARE_LOOPBACK_ENABLE : equal to one if - the hardware loopback is enabled (the ouput feeds the - receive buffer), 0 otherwise. - . EFI_SERIAL_SOFTWARE_LOOPBACK_ENABLE : equal to one if - a loopback is accomplished by software, 0 otherwise. - . EFI_SERIAL_HARDWARE_FLOW_CONTROL_ENABLE : equal to - one if the hardware flow control based on CTS (Clear - To Send) and RTS (Ready To Send) control signals is - enabled, 0 otherwise. - - @retval RETURN_SUCCESS The control bits were read from the serial device. - -**/ -RETURN_STATUS -EFIAPI -PL011UartGetControl ( - IN UINTN UartBase, - OUT UINT32 *Control - ); - -/** - Write data to serial device. - - @param Buffer Point of data buffer which need to be written. - @param NumberOfBytes Number of output bytes which are cached in Buffer. - - @retval 0 Write data failed. - @retval !0 Actual number of bytes written to serial device. - -**/ -UINTN -EFIAPI -PL011UartWrite ( - IN UINTN UartBase, - IN UINT8 *Buffer, - IN UINTN NumberOfBytes - ); - -/** - Read data from serial device and save the data in buffer. - - @param Buffer Point of data buffer which need to be written. - @param NumberOfBytes Number of output bytes which are cached in Buffer. - - @retval 0 Read data failed. - @retval !0 Actual number of bytes read from serial device. - -**/ -UINTN -EFIAPI -PL011UartRead ( - IN UINTN UartBase, - OUT UINT8 *Buffer, - IN UINTN NumberOfBytes - ); - -/** - Check to see if any data is available to be read from the debug device. - - @retval TRUE At least one byte of data is available to be read - @retval FALSE No data is available to be read - -**/ -BOOLEAN -EFIAPI -PL011UartPoll ( - IN UINTN UartBase - ); - -#endif -- 2.11.0