From: Ard Biesheuvel <ard.biesheuvel@linaro.org>
To: edk2-devel@lists.01.org
Cc: leif.lindholm@linaro.org, daniel.thompson@linaro.org,
masami.hiramatsu@linaro.org,
Ard Biesheuvel <ard.biesheuvel@linaro.org>
Subject: [PATCH edk2-platforms 0/8] SynQuacer updates
Date: Tue, 12 Dec 2017 10:37:59 +0000 [thread overview]
Message-ID: <20171212103807.18836-1-ard.biesheuvel@linaro.org> (raw)
A round of updates for Socionext SynQuacer:
- enable CPU idle states in the DT, so that the OS can put cores to sleep
using PSCI (#1)
- add the build number to PCDs that end up in user visible strings (#2)
- fix a PCIe detection issue in the DeveloperBox x16 slot, by keeping PERST#
asserted for at least 100 ms before link training (#3)
- ignore PCIe RC #0 if no card is inserted on EVB (#4 - #6)
- add the secondary UART to the DT for the OS to use (this is UART #0 on the
LS connector on DeveloperBox) (#7)
- explicitly retrain the downstream links on the Asmedia 1182/1184 PCIe
switch, to enable Gen2 speeds
Ard Biesheuvel (7):
Silicon/SynQuacer: enable CPU idle states in device tree
Platform/Socionext/SynQuacer: expose build number as firmware version
Silicon/SynQuacerPciHostBridgeLib: stall for 150 ms during PERST#
Silicon/SynQuacerPciHostBridgeLib: enable RCs based on PCD setting
Silicon/SynQuacer: disable PCI RC #0 DT node if disabled
Silicon/SynQuacerEvalBoard: enable PCI #0 only when card is detected
Silicon/SynQuacer/PlatformDxe: retrain PCIe switch links to Gen2 speed
Masahisa KOJIMA (1):
Silicon/Socionext/SynQuacer/DeviceTree: expose SCP serial port to the
OS
Platform/Socionext/DeveloperBox/DeveloperBox.dsc | 16 ++-
Platform/Socionext/DeveloperBox/SystemFirmwareDescriptor/SystemFirmwareDescriptor.inf | 1 +
Platform/Socionext/DeveloperBox/SystemFirmwareDescriptor/SystemFirmwareDescriptorTable.aslc | 6 +-
Platform/Socionext/SynQuacerEvalBoard/SynQuacerEvalBoard.dsc | 18 ++-
Platform/Socionext/SynQuacerEvalBoard/SystemFirmwareDescriptor/SystemFirmwareDescriptor.inf | 1 +
Platform/Socionext/SynQuacerEvalBoard/SystemFirmwareDescriptor/SystemFirmwareDescriptorTable.aslc | 6 +-
Silicon/Socionext/SynQuacer/DeviceTree/SynQuacer.dtsi | 57 ++++----
Silicon/Socionext/SynQuacer/Drivers/PlatformDxe/Pcie.c | 140 ++++++++++++++++++++
Silicon/Socionext/SynQuacer/Drivers/PlatformDxe/PlatformDxe.c | 13 +-
Silicon/Socionext/SynQuacer/Drivers/PlatformDxe/PlatformDxe.h | 37 ++++++
Silicon/Socionext/SynQuacer/Drivers/PlatformDxe/PlatformDxe.inf | 3 +
Silicon/Socionext/SynQuacer/Library/SynQuacerDtbLoaderLib/SynQuacerDtbLoaderLib.c | 94 +++++++++++++
Silicon/Socionext/SynQuacer/Library/SynQuacerDtbLoaderLib/SynQuacerDtbLoaderLib.inf | 42 ++++++
Silicon/Socionext/SynQuacer/Library/SynQuacerPciHostBridgeLib/SynQuacerPciHostBridgeLib.c | 19 ++-
Silicon/Socionext/SynQuacer/Library/SynQuacerPciHostBridgeLib/SynQuacerPciHostBridgeLib.inf | 4 +
Silicon/Socionext/SynQuacer/Library/SynQuacerPciHostBridgeLib/SynQuacerPciHostBridgeLibConstructor.c | 58 +++++---
Silicon/Socionext/SynQuacer/Library/SynQuacerPlatformPeiLib/SynQuacerPlatformPeiLib.c | 70 +++++++---
Silicon/Socionext/SynQuacer/Library/SynQuacerPlatformPeiLib/SynQuacerPlatformPeiLib.inf | 2 +
Silicon/Socionext/SynQuacer/SynQuacer.dec | 5 +
19 files changed, 504 insertions(+), 88 deletions(-)
create mode 100644 Silicon/Socionext/SynQuacer/Drivers/PlatformDxe/Pcie.c
create mode 100644 Silicon/Socionext/SynQuacer/Drivers/PlatformDxe/PlatformDxe.h
create mode 100644 Silicon/Socionext/SynQuacer/Library/SynQuacerDtbLoaderLib/SynQuacerDtbLoaderLib.c
create mode 100644 Silicon/Socionext/SynQuacer/Library/SynQuacerDtbLoaderLib/SynQuacerDtbLoaderLib.inf
--
2.11.0
next reply other threads:[~2017-12-12 10:33 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-12-12 10:37 Ard Biesheuvel [this message]
2017-12-12 10:38 ` [PATCH edk2-platforms 1/8] Silicon/SynQuacer: enable CPU idle states in device tree Ard Biesheuvel
2017-12-12 10:38 ` [PATCH edk2-platforms 2/8] Platform/Socionext/SynQuacer: expose build number as firmware version Ard Biesheuvel
2017-12-12 18:17 ` Leif Lindholm
2017-12-12 18:20 ` Ard Biesheuvel
2017-12-12 18:24 ` Leif Lindholm
2017-12-12 18:28 ` Ard Biesheuvel
2017-12-12 18:33 ` Leif Lindholm
2017-12-12 10:38 ` [PATCH edk2-platforms 3/8] Silicon/SynQuacerPciHostBridgeLib: stall for 150 ms during PERST# Ard Biesheuvel
2017-12-12 17:24 ` Leif Lindholm
2017-12-12 10:38 ` [PATCH edk2-platforms 4/8] Silicon/SynQuacerPciHostBridgeLib: enable RCs based on PCD setting Ard Biesheuvel
2017-12-12 10:38 ` [PATCH edk2-platforms 5/8] Silicon/SynQuacer: disable PCI RC #0 DT node if disabled Ard Biesheuvel
2017-12-12 14:54 ` Ard Biesheuvel
2017-12-12 17:32 ` Leif Lindholm
2017-12-12 17:35 ` Ard Biesheuvel
2017-12-12 17:50 ` Leif Lindholm
2017-12-12 18:09 ` Ard Biesheuvel
2017-12-12 18:15 ` Leif Lindholm
2017-12-12 10:38 ` [PATCH edk2-platforms 6/8] Silicon/SynQuacerEvalBoard: enable PCI #0 only when card is detected Ard Biesheuvel
2017-12-12 10:38 ` [PATCH edk2-platforms 7/8] Silicon/Socionext/SynQuacer/DeviceTree: expose SCP serial port to the OS Ard Biesheuvel
2017-12-12 17:37 ` Leif Lindholm
2017-12-12 10:38 ` [PATCH edk2-platforms 8/8] Silicon/SynQuacer/PlatformDxe: retrain PCIe switch links to Gen2 speed Ard Biesheuvel
2017-12-12 17:47 ` Leif Lindholm
2017-12-12 17:51 ` Ard Biesheuvel
2017-12-12 18:15 ` Leif Lindholm
2017-12-12 18:20 ` [PATCH edk2-platforms 0/8] SynQuacer updates Leif Lindholm
2017-12-12 18:38 ` Ard Biesheuvel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20171212103807.18836-1-ard.biesheuvel@linaro.org \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox