From: Leif Lindholm <leif.lindholm@linaro.org>
To: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: "edk2-devel@lists.01.org" <edk2-devel@lists.01.org>,
Daniel Thompson <daniel.thompson@linaro.org>,
Masami Hiramatsu <masami.hiramatsu@linaro.org>
Subject: Re: [PATCH edk2-platforms 2/8] Platform/Socionext/SynQuacer: expose build number as firmware version
Date: Tue, 12 Dec 2017 18:33:07 +0000 [thread overview]
Message-ID: <20171212183307.shevkybwvpt6fakw@bivouac.eciton.net> (raw)
In-Reply-To: <CAKv+Gu8rL4QB0xzxHNGq+8asjtD+uHG1rOKcfV0eFsHvPhh1Xg@mail.gmail.com>
On Tue, Dec 12, 2017 at 06:28:31PM +0000, Ard Biesheuvel wrote:
> On 12 December 2017 at 18:24, Leif Lindholm <leif.lindholm@linaro.org> wrote:
> > On Tue, Dec 12, 2017 at 06:20:00PM +0000, Ard Biesheuvel wrote:
> >> On 12 December 2017 at 18:17, Leif Lindholm <leif.lindholm@linaro.org> wrote:
> >> > On Tue, Dec 12, 2017 at 10:38:01AM +0000, Ard Biesheuvel wrote:
> >> >> Expose the contents of the .DSC macro BUILD_NUMBER via the
> >> >> PCD gEfiMdeModulePkgTokenSpaceGuid.PcdFirmwareVersionString (if > 1),
> >> >> and as the FMP system firmware version (for capsule update).
> >> >>
> >> >> Also, set the firmware vendor to 'Linaro Enterprise Group', to
> >> >> distinguish our builds from builds by other parties.
> >> >>
> >> >> Contributed-under: TianoCore Contribution Agreement 1.1
> >> >> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
> >> >> ---
> >> >> Platform/Socionext/DeveloperBox/DeveloperBox.dsc | 8 +++++++-
> >> >> Platform/Socionext/DeveloperBox/SystemFirmwareDescriptor/SystemFirmwareDescriptor.inf | 1 +
> >> >> Platform/Socionext/DeveloperBox/SystemFirmwareDescriptor/SystemFirmwareDescriptorTable.aslc | 6 ++++--
> >> >> Platform/Socionext/SynQuacerEvalBoard/SynQuacerEvalBoard.dsc | 8 +++++++-
> >> >> Platform/Socionext/SynQuacerEvalBoard/SystemFirmwareDescriptor/SystemFirmwareDescriptor.inf | 1 +
> >> >> Platform/Socionext/SynQuacerEvalBoard/SystemFirmwareDescriptor/SystemFirmwareDescriptorTable.aslc | 6 ++++--
> >> >> 6 files changed, 24 insertions(+), 6 deletions(-)
> >> >>
> >> >> diff --git a/Platform/Socionext/DeveloperBox/DeveloperBox.dsc b/Platform/Socionext/DeveloperBox/DeveloperBox.dsc
> >> >> index 8fbd7b2d908f..5ec26f9cdd34 100644
> >> >> --- a/Platform/Socionext/DeveloperBox/DeveloperBox.dsc
> >> >> +++ b/Platform/Socionext/DeveloperBox/DeveloperBox.dsc
> >> >> @@ -26,6 +26,7 @@ [Defines]
> >> >> BUILD_TARGETS = DEBUG|RELEASE
> >> >> SKUID_IDENTIFIER = DEFAULT
> >> >> FLASH_DEFINITION = Platform/Socionext/DeveloperBox/DeveloperBox.fdf
> >> >> + BUILD_NUMBER = 1
> >> >>
> >> >> [BuildOptions]
> >> >> RELEASE_*_*_CC_FLAGS = -DMDEPKG_NDEBUG -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=0
> >> >> @@ -222,7 +223,7 @@ [PcdsFeatureFlag]
> >> >> gEfiMdeModulePkgTokenSpaceGuid.PcdInstallAcpiSdtProtocol|TRUE
> >> >>
> >> >> [PcdsFixedAtBuild.common]
> >> >> - gArmPlatformTokenSpaceGuid.PcdFirmwareVendor|"Linaro"
> >> >> + gEfiMdeModulePkgTokenSpaceGuid.PcdFirmwareVendor|L"Linaro Enterprise Group"
> >> >
> >> > Actually, could you just delete this Pcd and let it fall back to the
> >> > default value of "EDK II"?
> >> >
> >>
> >> Yes. But perhaps it makes sense to put $(FW_VENDOR) in there if it is
> >> defined, so we can set it at build time? I would like to have a way to
> >> put something in the FirmwareVendor field in the UEFI system table
> >> that can help us identify firmware builds done by Linaro.
> >
> > Sure, that makes sense. Although we already have FIRMWARE_VER for
> > similar purposes, so something to match that name?
> > I.e. FIRMWARE_VENDOR.
> >
>
> Yes, so replace the hunk above with
>
> @@ -222,7 +227,9 @@ [PcdsFeatureFlag]
> gEfiMdeModulePkgTokenSpaceGuid.PcdInstallAcpiSdtProtocol|TRUE
>
> [PcdsFixedAtBuild.common]
> - gArmPlatformTokenSpaceGuid.PcdFirmwareVendor|"Linaro"
> +!ifdef $(FIRMWARE_VENDOR)
> + gEfiMdeModulePkgTokenSpaceGuid.PcdFirmwareVendor|L"$(FIRMWARE_VENDOR)"
> +!endif
>
> # non-secure SRAM
> gArmPlatformTokenSpaceGuid.PcdCPUCoresStackBase|0x2E000000
>
> ?
Works for me:
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
next prev parent reply other threads:[~2017-12-12 18:28 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-12-12 10:37 [PATCH edk2-platforms 0/8] SynQuacer updates Ard Biesheuvel
2017-12-12 10:38 ` [PATCH edk2-platforms 1/8] Silicon/SynQuacer: enable CPU idle states in device tree Ard Biesheuvel
2017-12-12 10:38 ` [PATCH edk2-platforms 2/8] Platform/Socionext/SynQuacer: expose build number as firmware version Ard Biesheuvel
2017-12-12 18:17 ` Leif Lindholm
2017-12-12 18:20 ` Ard Biesheuvel
2017-12-12 18:24 ` Leif Lindholm
2017-12-12 18:28 ` Ard Biesheuvel
2017-12-12 18:33 ` Leif Lindholm [this message]
2017-12-12 10:38 ` [PATCH edk2-platforms 3/8] Silicon/SynQuacerPciHostBridgeLib: stall for 150 ms during PERST# Ard Biesheuvel
2017-12-12 17:24 ` Leif Lindholm
2017-12-12 10:38 ` [PATCH edk2-platforms 4/8] Silicon/SynQuacerPciHostBridgeLib: enable RCs based on PCD setting Ard Biesheuvel
2017-12-12 10:38 ` [PATCH edk2-platforms 5/8] Silicon/SynQuacer: disable PCI RC #0 DT node if disabled Ard Biesheuvel
2017-12-12 14:54 ` Ard Biesheuvel
2017-12-12 17:32 ` Leif Lindholm
2017-12-12 17:35 ` Ard Biesheuvel
2017-12-12 17:50 ` Leif Lindholm
2017-12-12 18:09 ` Ard Biesheuvel
2017-12-12 18:15 ` Leif Lindholm
2017-12-12 10:38 ` [PATCH edk2-platforms 6/8] Silicon/SynQuacerEvalBoard: enable PCI #0 only when card is detected Ard Biesheuvel
2017-12-12 10:38 ` [PATCH edk2-platforms 7/8] Silicon/Socionext/SynQuacer/DeviceTree: expose SCP serial port to the OS Ard Biesheuvel
2017-12-12 17:37 ` Leif Lindholm
2017-12-12 10:38 ` [PATCH edk2-platforms 8/8] Silicon/SynQuacer/PlatformDxe: retrain PCIe switch links to Gen2 speed Ard Biesheuvel
2017-12-12 17:47 ` Leif Lindholm
2017-12-12 17:51 ` Ard Biesheuvel
2017-12-12 18:15 ` Leif Lindholm
2017-12-12 18:20 ` [PATCH edk2-platforms 0/8] SynQuacer updates Leif Lindholm
2017-12-12 18:38 ` Ard Biesheuvel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20171212183307.shevkybwvpt6fakw@bivouac.eciton.net \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox