From: Teemu Rytkonen <teemu.s.rytkonen@intel.com>
To: edk2-devel@lists.01.org
Cc: david.wei@intel.com, anthony.loeppert@intel.com
Subject: [Patch][edk2-platforms/devel-MinnowBoard3-UDK2017 1/2] Add support for Sony camera imx219
Date: Thu, 11 Jan 2018 09:42:27 -0800 [thread overview]
Message-ID: <20180111174227.16692-1-teemu.s.rytkonen@intel.com> (raw)
Adds support for two ACPI entries for imx219 as front
and back camera of IPU. Both camera entries can be configured
from the Front, Back camera of the BIOS menu settings.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Teemu Rytkonen <teemu.s.rytkonen@intel.com>
---
.../BensonGlacier/BoardInitPostMem/BoardGpios.h | 4 +-
.../PlatformSsdt/Camera/Camera_Sony219A.asl | 223 +++++++++++++++++++++
.../PlatformSsdt/Camera/Camera_Sony219B.asl | 223 +++++++++++++++++++++
.../AcpiTablesPCAT/PlatformSsdt/PlatformSsdt.asl | 3 +
.../PlatformSettings/PlatformSetupDxe/UnCore.vfi | 8 +-
.../PlatformSetupDxe/VfrStrings.uni | Bin 305886 -> 306044 bytes
6 files changed, 456 insertions(+), 5 deletions(-)
create mode 100644 Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/PlatformSsdt/Camera/Camera_Sony219A.asl
create mode 100644 Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/PlatformSsdt/Camera/Camera_Sony219B.asl
diff --git a/Platform/BroxtonPlatformPkg/Board/BensonGlacier/BoardInitPostMem/BoardGpios.h b/Platform/BroxtonPlatformPkg/Board/BensonGlacier/BoardInitPostMem/BoardGpios.h
index e4c1c2ee1..f636852b8 100644
--- a/Platform/BroxtonPlatformPkg/Board/BensonGlacier/BoardInitPostMem/BoardGpios.h
+++ b/Platform/BroxtonPlatformPkg/Board/BensonGlacier/BoardInitPostMem/BoardGpios.h
@@ -73,7 +73,7 @@ BXT_GPIO_PAD_INIT mBenson_GpioInitData_N[] =
BXT_GPIO_PAD_CONF(L"GPIO_7", M1 , NA , NA , NA , NA , Wake_Disabled, P_20K_L, NA , NA, HizRx0I, SAME, GPIO_PADBAR+0x0038, NORTH),//Mux with DISP1_TOUCH_INT_N based on the SW3 switch
BXT_GPIO_PAD_CONF(L"GPIO_8", M1 , NA , NA , NA , NA , Wake_Disabled, P_20K_L, NA , NA, HizRx0I, SAME, GPIO_PADBAR+0x0040, NORTH),//Mux with DISP1_TOUCH_RST_N based on the SW3 switch
BXT_GPIO_PAD_CONF(L"GPIO_9", M0 , GPO , NA , NA , NA , Wake_Disabled, P_20K_L, NA , NA ,NA , NA, GPIO_PADBAR+0x0048, NORTH),//Feature: LB
- BXT_GPIO_PAD_CONF(L"GPIO_10", M0 , GPO , NA , NA , NA , Wake_Enabled , P_20K_L, Inverted,IOAPIC, TxDRxE , NA, GPIO_PADBAR+0x0050, NORTH),//Feature: LB
+ BXT_GPIO_PAD_CONF(L"GPIO_10", M0 , GPO , NA , NA , NA , Wake_Enabled , P_20K_L, Inverted,IOAPIC, TxDRxE , NA, GPIO_PADBAR+0x0050, NORTH),//Feature: CAM0_POWEREN
BXT_GPIO_PAD_CONF(L"GPIO_11", M1 , NA , NA , NA , NA , Wake_Disabled, P_20K_L, NA , NA ,NA , NA, GPIO_PADBAR+0x0058, NORTH),//Feature: LB
BXT_GPIO_PAD_CONF(L"GPIO_12", M1 , NA , NA , NA , NA , Wake_Enabled , P_20K_L, NA , NA ,NA , NA, GPIO_PADBAR+0x0060, NORTH),//Feature: LB
BXT_GPIO_PAD_CONF(L"GPIO_13", M1 , NA , NA , NA , NA , Wake_Disabled, P_20K_L, NA , NA ,NA , NA, GPIO_PADBAR+0x0068, NORTH),//Feature: LB
@@ -82,7 +82,7 @@ BXT_GPIO_PAD_INIT mBenson_GpioInitData_N[] =
BXT_GPIO_PAD_CONF(L"GPIO_16", M0 , GPI , NA , NA , Edge , Wake_Disabled, P_20K_H, Inverted,IOAPIC, HizRx0I ,DisPuPd, GPIO_PADBAR+0x0080, NORTH),//Feature:SIM Card Detect Net in Sch: SIM_CON_CD1, falling edge trigger
BXT_GPIO_PAD_CONF(L"GPIO_17", M0 , GPI , GPIO_D, NA , Edge , Wake_Disabled, P_NONE , NA ,IOAPIC, NA ,DisPuPd, GPIO_PADBAR+0x0088, NORTH), // SOC_LSE_HOST_IRQ_N
BXT_GPIO_PAD_CONF(L"GPIO_18", M1 , NA , NA , NA , NA , Wake_Disabled, P_20K_H, NA , NA, NA , NA, GPIO_PADBAR+0x0090, NORTH),//Feature: LB
- BXT_GPIO_PAD_CONF(L"GPIO_19", M1 , NA , NA , NA , NA , Wake_Disabled, P_20K_H, NA , NA, NA , NA, GPIO_PADBAR+0x0098, NORTH),//Feature: LB
+ BXT_GPIO_PAD_CONF(L"GPIO_19", M0 , NA , NA , NA , NA , Wake_Disabled, P_20K_H, NA , NA, NA , NA, GPIO_PADBAR+0x0098, NORTH),//Feature: CAM0_POWEREN
BXT_GPIO_PAD_CONF(L"GPIO_20", M1 , NA , NA , NA , NA , Wake_Disabled, P_20K_L, NA , NA, NA , NA, GPIO_PADBAR+0x00A0, NORTH),//Feature: LB
BXT_GPIO_PAD_CONF(L"GPIO_21", M1 , NA , NA , NA , NA , Wake_Disabled, P_20K_L, NA , NA, NA , NA, GPIO_PADBAR+0x00A8, NORTH),//Feature: LB
BXT_GPIO_PAD_CONF(L"GPIO_22", M0 , GPIO ,GPIO_D , NA , NA , Wake_Disabled, P_20K_L, NA , NA, NA , NA, GPIO_PADBAR+0x00B0, NORTH),//Feature: LB
diff --git a/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/PlatformSsdt/Camera/Camera_Sony219A.asl b/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/PlatformSsdt/Camera/Camera_Sony219A.asl
new file mode 100644
index 000000000..13cba6e19
--- /dev/null
+++ b/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/PlatformSsdt/Camera/Camera_Sony219A.asl
@@ -0,0 +1,223 @@
+/** @file
+
+@copyright
+ Copyright (c) 2012 - 2016 Intel Corporation. All rights reserved
+ This software and associated documentation (if any) is furnished
+ under a license and may only be used or copied in accordance
+ with the terms of the license. Except as permitted by the
+ license, no part of this software or documentation may be
+ reproduced, stored in a retrieval system, or transmitted in any
+ form or by any means without the express written consent of
+ Intel Corporation.
+ This file contains a 'Sample Driver' and is licensed as such
+ under the terms of your license agreement with Intel or your
+ vendor. This file may be modified by the user, subject to
+ the additional terms of the license agreement.
+
+@par Specification Reference:
+**/
+
+Scope(\_SB.PCI0.I2C0)
+{
+ Device (CAM3)
+ {
+ //
+ // Rear Camera IMX219
+ //
+ Name (_ADR, Zero) // _ADR: Address
+ Name (_HID, "SONY219A") // _HID: Hardware ID
+ Name (_CID, "SONY219A") // _CID: Compatible ID
+ Name (_SUB, "INTL0000") // _SUB: Subsystem ID
+ Name (_DDN, "SONY IMX219") // _DDN: DOS Device Name
+ Name (_UID, One) // _UID: Unique ID
+ /* need to be update after power on
+ Name (_DEP, Package () // _DEP: Dependencies
+ {
+ //PMIC device
+ })
+
+ Name (_PR0, Package (0x03) // _PR0: Power Resources for D0
+ {
+ // Power and Clock
+ })
+ */
+ Name (PLDB, Package (0x01)
+ {
+ Buffer (0x14)
+ {
+ /* 0000 */ 0x82, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ /* 0008 */ 0x61, 0x0C, 0x00, 0x00, 0x03, 0x00, 0x00, 0x00,
+ /* 0010 */ 0xFF, 0xFF, 0xFF, 0xFF
+ }
+ })
+ Method (_PLD, 0, Serialized) // _PLD: Physical Location of Device
+ {
+ Return (PLDB)
+ }
+
+ Method (_STA, 0, NotSerialized) // _STA: Status
+ {
+ If(LEqual(WCAS,3)) { // 3-IMX219
+ Return (0x0F)
+ }
+ Return (0x0)
+ }
+ /*
+ Method (_PS3, 0, Serialized) // _PS3: Power State 3
+ {
+ }
+
+ Method (_PS0, 0, Serialized) // _PS0: Power State 0
+ {
+ }
+ */
+ Name (SBUF, ResourceTemplate ()
+ {
+ GpioIo (Exclusive, PullDefault, 0x0000, 0x0000, IoRestrictionOutputOnly,
+ "\\_SB.GPO0", 0x00, ResourceConsumer, ,
+ )
+ {
+ 0x0A // GPIO_10
+ }
+ //I2C for CMOS
+ I2cSerialBus (0x0010, ControllerInitiated, 0x00061A80,
+ AddressingMode7Bit, "\\_SB.PCI0.I2C0",
+ 0x00, ResourceConsumer, ,
+ )
+ })
+ Method (_CRS, 0, NotSerialized) // _CRS: Current Resource Settings
+ {
+ Return (SBUF)
+ }
+
+ Method (_DSM, 4, NotSerialized) // _DSM: Device-Specific Method
+ {
+ If (LEqual (Arg0, Buffer (0x10)
+ {
+ /* 0000 */ 0x6A, 0xA7, 0x7B, 0x37, 0x90, 0xF3, 0xFF, 0x4A,
+ /* 0008 */ 0xAB, 0x38, 0x9B, 0x1B, 0xF3, 0x3A, 0x30, 0x15
+ }))
+ {
+ Return ("SONY219A") //DSDT_CAM_HWID
+ }
+
+ If (LEqual (Arg0, Buffer (0x10)
+ {
+ /* 0000 */ 0xAA, 0xAA, 0x62, 0x3C, 0xE0, 0xD8, 0x1A, 0x40,
+ /* 0008 */ 0x84, 0xC3, 0xFC, 0x05, 0x65, 0x6F, 0xA2, 0x8C
+ }))
+ {
+ Return ("IMX219") //DSDT_CAM_CMOS
+ }
+
+ If (LEqual (Arg0, Buffer (0x10)
+ {
+ /* 0000 */ 0x8F, 0xCE, 0x2A, 0x82, 0x14, 0x28, 0x74, 0x41,
+ /* 0008 */ 0xA5, 0x6B, 0x5F, 0x02, 0x9F, 0xE0, 0x79, 0xEE
+ }))
+ {
+ Return ("RasperryPi") //DSDT_CAM_MODULE
+ }
+
+ If (LEqual (Arg0, Buffer (0x10)
+ {
+ /* 0000 */ 0x2A, 0x51, 0x59, 0x29, 0x8C, 0x02, 0x46, 0x46,
+ /* 0008 */ 0xB7, 0x3D, 0x4D, 0x1B, 0x56, 0x72, 0xFA, 0xD8
+ }))
+ {
+ Return ("Intel_RVP") //DSDT_CAM_CUSTOM
+ }
+
+
+ If (LEqual (Arg0, Buffer (0x10)
+ {
+ /* 0000 */ 0xD8, 0x7B, 0x3B, 0xEA, 0x9B, 0xE0, 0x39, 0x42,
+ /* 0008 */ 0xAD, 0x6E, 0xED, 0x52, 0x5F, 0x3F, 0x26, 0xAB
+ }))
+ {
+ Return (0x1020) //DSDT_CAM_MIPIPORT
+ }
+
+ If (LEqual (Arg0, Buffer (0x10)
+ {
+ /* 0000 */ 0x92, 0xC4, 0x5A, 0xB6, 0x30, 0x9E, 0x60, 0x4D,
+ /* 0008 */ 0xB5, 0xB2, 0xF4, 0x97, 0xC7, 0x90, 0xD9, 0xCF
+ }))
+ {
+ Return (Zero) //DSDT_CAM_FUNC
+ }
+
+ If (LEqual (Arg0, Buffer (0x10)
+ {
+ /* 0000 */ 0x0F, 0xAB, 0x70, 0xE7, 0x44, 0x26, 0xAB, 0x4B,
+ /* 0008 */ 0x86, 0x28, 0xD6, 0x2F, 0x16, 0x83, 0xFB, 0x9D
+ }))
+ {
+ Return (Zero) //DSDT_CAM_ROM
+ }
+ If (LEqual (Arg0, Buffer (0x10)
+ {
+ /* 0000 */ 0xB2, 0x4A, 0xA5, 0x1E, 0x84, 0xCD, 0xCC, 0x48,
+ /* 0008 */ 0x9D, 0xD4, 0x7F, 0x59, 0x4E, 0xC3, 0xB0, 0x15
+ }))
+ {
+ Return (Zero) //DSDT_CAM_INTF_VER
+ }
+
+ If (LEqual (Arg0, Buffer (0x10)
+ {
+ /* 0000 */ 0x39, 0xA6, 0xC9, 0x75, 0x8A, 0x5C, 0x00, 0x4A,
+ /* 0008 */ 0x9F, 0x48, 0xA9, 0xC3, 0xB5, 0xDA, 0x78, 0x9F
+ }))
+ {
+ Return (Zero) //DSDT_CAM_VCM
+ }
+
+ If (LEqual (Arg0, Buffer (0x10)
+ {
+ /* 0000 */ 0x51, 0x26, 0xBE, 0x8D, 0xC1, 0x70, 0x6F, 0x4C,
+ /* 0008 */ 0xAC, 0x87, 0xA3, 0x7C, 0xB4, 0x6E, 0x4A, 0xF6
+ }))
+ {
+ Return (0x0) //MCLK0 --> OSC_CLKOUT_R_0
+ }
+ If (LEqual (Arg0, Buffer (0x10)
+ {
+ /* 0000 */ 0x49, 0x75, 0x25, 0x26, 0x71, 0x92, 0xA4, 0x4C,
+ /* 0008 */ 0xBB, 0x43, 0xC4, 0x89, 0x9D, 0x5A, 0x48, 0x81
+ }))
+
+ {
+ If (LEqual (Arg2, One)) //DSDT_CAM_I2C
+ {
+ Return (One)
+ }
+
+ If (LEqual (Arg2, 0x02))
+ {
+ Return (0x03003600)
+ }
+ }
+
+ If (LEqual (Arg0, Buffer (0x10)
+ {
+ /* 0000 */ 0x40, 0x46, 0x23, 0x79, 0x10, 0x9E, 0xEA, 0x4F,
+ /* 0008 */ 0xA5, 0xC1, 0xB5, 0xAA, 0x8B, 0x19, 0x75, 0x6F
+ }))
+ {
+ If (LEqual (Arg2, One)) //DSDT_CAM_GPIO
+ {
+ Return (0x01)
+ }
+
+ If (LEqual (Arg2, 0x02))
+ {
+ Return (0x01004300)
+ }
+ }
+
+ Return (Zero)
+ }
+ }
+
+} // Scope(\_SB.PCI0.I2C4)
diff --git a/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/PlatformSsdt/Camera/Camera_Sony219B.asl b/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/PlatformSsdt/Camera/Camera_Sony219B.asl
new file mode 100644
index 000000000..cd9d0be64
--- /dev/null
+++ b/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/PlatformSsdt/Camera/Camera_Sony219B.asl
@@ -0,0 +1,223 @@
+/** @file
+
+@copyright
+ Copyright (c) 2012 - 2016 Intel Corporation. All rights reserved
+ This software and associated documentation (if any) is furnished
+ under a license and may only be used or copied in accordance
+ with the terms of the license. Except as permitted by the
+ license, no part of this software or documentation may be
+ reproduced, stored in a retrieval system, or transmitted in any
+ form or by any means without the express written consent of
+ Intel Corporation.
+ This file contains a 'Sample Driver' and is licensed as such
+ under the terms of your license agreement with Intel or your
+ vendor. This file may be modified by the user, subject to
+ the additional terms of the license agreement.
+
+@par Specification Reference:
+**/
+
+Scope(\_SB.PCI0.I2C6)
+{
+ Device (CAM4)
+ {
+ //
+ // Front Camera IMX219
+ //
+ Name (_ADR, Zero) // _ADR: Address
+ Name (_HID, "SONY219A") // _HID: Hardware ID
+ Name (_CID, "SONY219A") // _CID: Compatible ID
+ Name (_SUB, "INTL0000") // _SUB: Subsystem ID
+ Name (_DDN, "SONY IMX219") // _DDN: DOS Device Name
+ Name (_UID, One) // _UID: Unique ID
+ /* need to be update after power on
+ Name (_DEP, Package () // _DEP: Dependencies
+ {
+ //PMIC device
+ })
+
+ Name (_PR0, Package (0x03) // _PR0: Power Resources for D0
+ {
+ // Power and Clock
+ })
+ */
+ Name (PLDB, Package (0x01)
+ {
+ Buffer (0x14)
+ {
+ /* 0000 */ 0x82, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ /* 0008 */ 0x61, 0x0C, 0x00, 0x00, 0x03, 0x00, 0x00, 0x00,
+ /* 0010 */ 0xFF, 0xFF, 0xFF, 0xFF
+ }
+ })
+ Method (_PLD, 0, Serialized) // _PLD: Physical Location of Device
+ {
+ Return (PLDB)
+ }
+
+ Method (_STA, 0, NotSerialized) // _STA: Status
+ {
+ If(LEqual(UCAS,2)) { // 2-IMX219
+ Return (0x0F)
+ }
+ Return (0x0)
+ }
+ /*
+ Method (_PS3, 0, Serialized) // _PS3: Power State 3
+ {
+ }
+
+ Method (_PS0, 0, Serialized) // _PS0: Power State 0
+ {
+ }
+ */
+ Name (SBUF, ResourceTemplate ()
+ {
+ GpioIo (Exclusive, PullDefault, 0x0000, 0x0000, IoRestrictionOutputOnly,
+ "\\_SB.GPO0", 0x00, ResourceConsumer, ,
+ )
+ {
+ 0x13 // GPIO_19
+ }
+ //I2C for CMOS
+ I2cSerialBus (0x0010, ControllerInitiated, 0x00061A80,
+ AddressingMode7Bit, "\\_SB.PCI0.I2C6",
+ 0x00, ResourceConsumer, ,
+ )
+ })
+ Method (_CRS, 0, NotSerialized) // _CRS: Current Resource Settings
+ {
+ Return (SBUF)
+ }
+
+ Method (_DSM, 4, NotSerialized) // _DSM: Device-Specific Method
+ {
+ If (LEqual (Arg0, Buffer (0x10)
+ {
+ /* 0000 */ 0x6A, 0xA7, 0x7B, 0x37, 0x90, 0xF3, 0xFF, 0x4A,
+ /* 0008 */ 0xAB, 0x38, 0x9B, 0x1B, 0xF3, 0x3A, 0x30, 0x15
+ }))
+ {
+ Return ("SONY219A") //DSDT_CAM_HWID
+ }
+
+ If (LEqual (Arg0, Buffer (0x10)
+ {
+ /* 0000 */ 0xAA, 0xAA, 0x62, 0x3C, 0xE0, 0xD8, 0x1A, 0x40,
+ /* 0008 */ 0x84, 0xC3, 0xFC, 0x05, 0x65, 0x6F, 0xA2, 0x8C
+ }))
+ {
+ Return ("IMX219") //DSDT_CAM_CMOS
+ }
+
+ If (LEqual (Arg0, Buffer (0x10)
+ {
+ /* 0000 */ 0x8F, 0xCE, 0x2A, 0x82, 0x14, 0x28, 0x74, 0x41,
+ /* 0008 */ 0xA5, 0x6B, 0x5F, 0x02, 0x9F, 0xE0, 0x79, 0xEE
+ }))
+ {
+ Return ("RasperryPi") //DSDT_CAM_MODULE
+ }
+
+ If (LEqual (Arg0, Buffer (0x10)
+ {
+ /* 0000 */ 0x2A, 0x51, 0x59, 0x29, 0x8C, 0x02, 0x46, 0x46,
+ /* 0008 */ 0xB7, 0x3D, 0x4D, 0x1B, 0x56, 0x72, 0xFA, 0xD8
+ }))
+ {
+ Return ("Intel_RVP") //DSDT_CAM_CUSTOM
+ }
+
+
+ If (LEqual (Arg0, Buffer (0x10)
+ {
+ /* 0000 */ 0xD8, 0x7B, 0x3B, 0xEA, 0x9B, 0xE0, 0x39, 0x42,
+ /* 0008 */ 0xAD, 0x6E, 0xED, 0x52, 0x5F, 0x3F, 0x26, 0xAB
+ }))
+ {
+ Return (0x1022) //DSDT_CAM_MIPIPORT
+ }
+
+ If (LEqual (Arg0, Buffer (0x10)
+ {
+ /* 0000 */ 0x92, 0xC4, 0x5A, 0xB6, 0x30, 0x9E, 0x60, 0x4D,
+ /* 0008 */ 0xB5, 0xB2, 0xF4, 0x97, 0xC7, 0x90, 0xD9, 0xCF
+ }))
+ {
+ Return (Zero) //DSDT_CAM_FUNC
+ }
+
+ If (LEqual (Arg0, Buffer (0x10)
+ {
+ /* 0000 */ 0x0F, 0xAB, 0x70, 0xE7, 0x44, 0x26, 0xAB, 0x4B,
+ /* 0008 */ 0x86, 0x28, 0xD6, 0x2F, 0x16, 0x83, 0xFB, 0x9D
+ }))
+ {
+ Return (Zero) //DSDT_CAM_ROM
+ }
+ If (LEqual (Arg0, Buffer (0x10)
+ {
+ /* 0000 */ 0xB2, 0x4A, 0xA5, 0x1E, 0x84, 0xCD, 0xCC, 0x48,
+ /* 0008 */ 0x9D, 0xD4, 0x7F, 0x59, 0x4E, 0xC3, 0xB0, 0x15
+ }))
+ {
+ Return (Zero) //DSDT_CAM_INTF_VER
+ }
+
+ If (LEqual (Arg0, Buffer (0x10)
+ {
+ /* 0000 */ 0x39, 0xA6, 0xC9, 0x75, 0x8A, 0x5C, 0x00, 0x4A,
+ /* 0008 */ 0x9F, 0x48, 0xA9, 0xC3, 0xB5, 0xDA, 0x78, 0x9F
+ }))
+ {
+ Return (Zero) //DSDT_CAM_VCM
+ }
+
+ If (LEqual (Arg0, Buffer (0x10)
+ {
+ /* 0000 */ 0x51, 0x26, 0xBE, 0x8D, 0xC1, 0x70, 0x6F, 0x4C,
+ /* 0008 */ 0xAC, 0x87, 0xA3, 0x7C, 0xB4, 0x6E, 0x4A, 0xF6
+ }))
+ {
+ Return (0x0) //MCLK0 --> OSC_CLKOUT_R_0
+ }
+ If (LEqual (Arg0, Buffer (0x10)
+ {
+ /* 0000 */ 0x49, 0x75, 0x25, 0x26, 0x71, 0x92, 0xA4, 0x4C,
+ /* 0008 */ 0xBB, 0x43, 0xC4, 0x89, 0x9D, 0x5A, 0x48, 0x81
+ }))
+
+ {
+ If (LEqual (Arg2, One)) //DSDT_CAM_I2C
+ {
+ Return (One)
+ }
+
+ If (LEqual (Arg2, 0x02))
+ {
+ Return (0x03003600)
+ }
+ }
+
+ If (LEqual (Arg0, Buffer (0x10)
+ {
+ /* 0000 */ 0x40, 0x46, 0x23, 0x79, 0x10, 0x9E, 0xEA, 0x4F,
+ /* 0008 */ 0xA5, 0xC1, 0xB5, 0xAA, 0x8B, 0x19, 0x75, 0x6F
+ }))
+ {
+ If (LEqual (Arg2, One)) //DSDT_CAM_GPIO
+ {
+ Return (0x01)
+ }
+
+ If (LEqual (Arg2, 0x02))
+ {
+ Return (0x01004300)
+ }
+ }
+
+ Return (Zero)
+ }
+ }
+
+} // Scope(\_SB.PCI0.I2C4)
diff --git a/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/PlatformSsdt/PlatformSsdt.asl b/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/PlatformSsdt/PlatformSsdt.asl
index 9cd50ae7f..b86baf357 100644
--- a/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/PlatformSsdt/PlatformSsdt.asl
+++ b/Platform/BroxtonPlatformPkg/Common/Acpi/AcpiTablesPCAT/PlatformSsdt/PlatformSsdt.asl
@@ -26,6 +26,7 @@ DefinitionBlock (
External(\_SB.PCI0.I2C3, DeviceObj)
External(\_SB.PCI0.I2C4, DeviceObj)
External(\_SB.PCI0.I2C5, DeviceObj)
+ External(\_SB.PCI0.I2C6, DeviceObj)
External(\_SB.PCI0.I2C7, DeviceObj)
External(\_SB.PCI0.URT1, DeviceObj)
External(\_SB.PCI0.URT2, DeviceObj)
@@ -52,6 +53,8 @@ DefinitionBlock (
include ("Camera/Camera_INT3471.asl")
include ("Camera/Camera_INT3474.asl")
include ("Camera/Camera_Sony214A.asl")
+ include ("Camera/Camera_Sony219A.asl")
+ include ("Camera/Camera_Sony219B.asl")
include ("Camera/Flash_TPS61311.asl")
}
diff --git a/Platform/BroxtonPlatformPkg/Common/PlatformSettings/PlatformSetupDxe/UnCore.vfi b/Platform/BroxtonPlatformPkg/Common/PlatformSettings/PlatformSetupDxe/UnCore.vfi
index f8b4b47ec..a185e9fbd 100644
--- a/Platform/BroxtonPlatformPkg/Common/PlatformSettings/PlatformSetupDxe/UnCore.vfi
+++ b/Platform/BroxtonPlatformPkg/Common/PlatformSettings/PlatformSetupDxe/UnCore.vfi
@@ -300,14 +300,16 @@ form formid = UNCORE_FORM_ID,
help = STRING_TOKEN(STR_WORLDCAMERA_SELECTION_HELP),
option text = STRING_TOKEN(STR_DISABLE), value = 0, flags = RESET_REQUIRED;
option text = STRING_TOKEN(STR_IMX214), value = 1, flags = RESET_REQUIRED;
- option text = STRING_TOKEN(STR_IMX135), value = 2, flags = MANUFACTURING | DEFAULT | RESET_REQUIRED;
+ option text = STRING_TOKEN(STR_IMX135), value = 2, flags = RESET_REQUIRED;
+ option text = STRING_TOKEN(STR_IMX219), value = 3, flags = MANUFACTURING | DEFAULT | RESET_REQUIRED;
endoneof;
oneof varid = Setup.UserCameraSel,
prompt = STRING_TOKEN(STR_USERCAMERA_SELECTION_PROMPT),
help = STRING_TOKEN(STR_USERCAMERA_SELECTION_HELP),
- option text = STRING_TOKEN(STR_DISABLE), value = 0, flags = RESET_REQUIRED;
- option text = STRING_TOKEN(STR_OV2740), value = 1, flags = MANUFACTURING | DEFAULT | RESET_REQUIRED;
+ option text = STRING_TOKEN(STR_DISABLE), value = 0, flags = MANUFACTURING | DEFAULT | RESET_REQUIRED;
+ option text = STRING_TOKEN(STR_OV2740), value = 1, flags = RESET_REQUIRED;
+ option text = STRING_TOKEN(STR_IMX219), value = 2, flags = RESET_REQUIRED;
endoneof;
// Rotation
diff --git a/Platform/BroxtonPlatformPkg/Common/PlatformSettings/PlatformSetupDxe/VfrStrings.uni b/Platform/BroxtonPlatformPkg/Common/PlatformSettings/PlatformSetupDxe/VfrStrings.uni
index 163b750c3b0c54bd54a0760effffcc6c8296ebe1..df868581ebdda14ee03287bbb2d73bd40e03dbe8 100644
GIT binary patch
delta 60
zcmcb2Rp`$(p$$Reler#AaC<WNGDI*KF&HvfPBs)PW`(dG%E~wAiMQv8GXgOa5HoMj
J6K5%y3;<2w5&{4K
delta 39
scmex!P3YcLp$$RelV@<sOjihFWN8+VXcv%R1Y#y2X5KC!!ICo>039m}#Q*>R
--
2.14.1.windows.1
next reply other threads:[~2018-01-11 17:37 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-01-11 17:42 Teemu Rytkonen [this message]
2018-01-12 8:03 ` [Patch][edk2-platforms/devel-MinnowBoard3-UDK2017 1/2] Add support for Sony camera imx219 Wei, David
2018-01-12 18:46 ` Rytkonen, Teemu S
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180111174227.16692-1-teemu.s.rytkonen@intel.com \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox