* [Patch][edk2-platforms/devel-MinnowBoard3-UDK2017] SMBus Host driver.
@ 2018-02-13 5:55 zwei4
0 siblings, 0 replies; only message in thread
From: zwei4 @ 2018-02-13 5:55 UTC (permalink / raw)
To: edk2-devel
Add Apollo Lake SMBus host controller DXE driver.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: zwei4 <david.wei@intel.com>
---
.../BroxtonSiPkg/SouthCluster/Smbus/Dxe/PchSmbus.h | 358 +++++++++++
.../SouthCluster/Smbus/Dxe/PchSmbusArp.c | 673 +++++++++++++++++++++
.../SouthCluster/Smbus/Dxe/PchSmbusDxe.inf | 63 ++
.../SouthCluster/Smbus/Dxe/PchSmbusEntry.c | 155 +++++
4 files changed, 1249 insertions(+)
create mode 100644 Silicon/BroxtonSoC/BroxtonSiPkg/SouthCluster/Smbus/Dxe/PchSmbus.h
create mode 100644 Silicon/BroxtonSoC/BroxtonSiPkg/SouthCluster/Smbus/Dxe/PchSmbusArp.c
create mode 100644 Silicon/BroxtonSoC/BroxtonSiPkg/SouthCluster/Smbus/Dxe/PchSmbusDxe.inf
create mode 100644 Silicon/BroxtonSoC/BroxtonSiPkg/SouthCluster/Smbus/Dxe/PchSmbusEntry.c
diff --git a/Silicon/BroxtonSoC/BroxtonSiPkg/SouthCluster/Smbus/Dxe/PchSmbus.h b/Silicon/BroxtonSoC/BroxtonSiPkg/SouthCluster/Smbus/Dxe/PchSmbus.h
new file mode 100644
index 000000000..5e226a80d
--- /dev/null
+++ b/Silicon/BroxtonSoC/BroxtonSiPkg/SouthCluster/Smbus/Dxe/PchSmbus.h
@@ -0,0 +1,358 @@
+/** @file
+ PCH SMBus Protocol.
+
+ Copyright (c) 2018, Intel Corporation. All rights reserved.<BR>
+
+ This program and the accompanying materials
+ are licensed and made available under the terms and conditions of the BSD License
+ which accompanies this distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php.
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+#ifndef _DXE_PCH_SMBUS_H
+#define _DXE_PCH_SMBUS_H
+
+#include <Uefi.h>
+#include <Library/UefiLib.h>
+#include <Library/BaseLib.h>
+#include <Protocol/SmbusHc.h>
+#include <Library/DebugLib.h>
+#include <PiDxe.h>
+#include <Library/HobLib.h>
+#include <Guid/HobList.h>
+#include <Library/MemoryAllocationLib.h>
+#include <Library/UefiBootServicesTableLib.h>
+#include <Library/BaseMemoryLib.h>
+#include <ScAccess.h>
+#include <Private/Guid/ScPolicyHobGuid.h>
+#include <Private/Library/ScSmbusCommonLib.h>
+
+//
+// Definitions
+//
+
+///
+/// Max number of SMBus devices (7 bit address yields 128 combinations but 21 of those are reserved)
+///
+#define MAX_SMBUS_DEVICES 107
+#define MICROSECOND 10
+#define MILLISECOND (1000 * MICROSECOND)
+#define ONESECOND (1000 * MILLISECOND)
+
+///
+/// Private Data Structures
+///
+typedef struct _SMBUS_NOTIFY_FUNCTION_LIST_NODE {
+ UINT32 Signature;
+ LIST_ENTRY Link;
+ EFI_SMBUS_DEVICE_ADDRESS SlaveAddress;
+ UINTN Data;
+ EFI_SMBUS_NOTIFY_FUNCTION NotifyFunction;
+} SMBUS_NOTIFY_FUNCTION_LIST_NODE;
+
+#define SMBUS_NOTIFY_FUNCTION_LIST_NODE_FROM_LINK(_node) \
+ CR ( \
+ _node, \
+ SMBUS_NOTIFY_FUNCTION_LIST_NODE, \
+ Link, \
+ PCH_SMBUS_PRIVATE_DATA_SIGNATURE \
+ )
+
+///
+/// Declare a local instance structure for this driver
+///
+typedef struct _SMBUS_INSTANCE {
+ UINTN Signature;
+ EFI_HANDLE Handle;
+
+ UINT32 SmbusIoBase;
+ SMBUS_IO_READ SmbusIoRead;
+ SMBUS_IO_WRITE SmbusIoWrite;
+ SMBUS_IO_DONE IoDone;
+
+ ///
+ /// Published interface
+ ///
+ EFI_SMBUS_HC_PROTOCOL SmbusController;
+
+ UINT8 DeviceMapEntries;
+ EFI_SMBUS_DEVICE_MAP DeviceMap[MAX_SMBUS_DEVICES];
+
+ UINT8 PlatformNumRsvd;
+ CONST UINT8 *PlatformRsvdAddr;
+
+ LIST_ENTRY NotifyFunctionList;
+ EFI_EVENT NotificationEvent;
+
+} SMBUS_INSTANCE;
+
+//
+// Driver global data
+//
+SMBUS_INSTANCE *mSmbusContext;
+
+//
+// Prototypes
+//
+
+/**
+ Execute an SMBUS operation
+
+ @param[in] This The protocol instance
+ @param[in] SlaveAddress The address of the SMBUS slave device
+ @param[in] Command The SMBUS command
+ @param[in] Operation Which SMBus protocol will be issued
+ @param[in] PecCheck If Packet Error Code Checking is to be used
+ @param[in, out] Length Length of dta
+ @param[in, out] Buffer Data buffer
+
+ @retval EFI_SUCCESS The SMBUS operation is successful
+ @retval Others Something error occurred
+**/
+EFI_STATUS
+EFIAPI
+SmbusExecute (
+ IN CONST EFI_SMBUS_HC_PROTOCOL *This,
+ IN EFI_SMBUS_DEVICE_ADDRESS SlaveAddress,
+ IN EFI_SMBUS_DEVICE_COMMAND Command,
+ IN EFI_SMBUS_OPERATION Operation,
+ IN BOOLEAN PecCheck,
+ IN OUT UINTN *Length,
+ IN OUT VOID *Buffer
+ );
+
+/**
+ SMBus DXE Module Entry Point.
+
+ - Introduction
+ The SMBus module is a DXE driver that provides a standard way to execute an SMBus command.
+
+ - @pre
+ - @link SC_POLICY SC_POLICY_HOB @endlink
+ - This module uses the parameters in SmbusConfig for platform reserved (non ARP capable) addresses.
+
+ - @result
+ The SMBus driver produces EFI_SMBUS_HC_PROTOCOL which is documented in the SMBus Host Controller
+ Protocol Specification.
+
+ @param[in] ImageHandle ImageHandle of this module
+ @param[in] SystemTable EFI System Table
+
+ @retval EFI_SUCCESS Driver initializes successfully
+ @retval Others Some error occurred
+**/
+EFI_STATUS
+EFIAPI
+InitializePchSmbus (
+ IN EFI_HANDLE ImageHandle,
+ IN EFI_SYSTEM_TABLE *SystemTable
+ );
+
+/**
+ Set Slave address for an Smbus device with a known UDID or perform a general
+ ARP of all devices.
+
+ @param[in] This Pointer to the instance of the EFI_SMBUS_HC_PROTOCOL.
+ @param[in] ArpAll If TRUE, do a full ARP. Otherwise, just ARP the specified UDID.
+ @param[in] SmbusUdid When doing a directed ARP, ARP the device with this UDID.
+ @param[in, out] SlaveAddress Buffer to store new Slave Address during directed ARP. On output,If
+ ArpAlll == TRUE, this will contain the newly assigned Slave address.
+
+ @retval EFI_SUCCESS The function completed successfully
+ @retval EFI_INVALID_PARAMETER ArpAll == FALSE but SmbusUdid or SlaveAddress are NULL.
+ @retval Others Return value from SmbusFullArp() or SmbusDirectedArp().
+**/
+EFI_STATUS
+EFIAPI
+SmbusArpDevice (
+ IN CONST EFI_SMBUS_HC_PROTOCOL *This,
+ IN BOOLEAN ArpAll,
+ IN EFI_SMBUS_UDID * SmbusUdid, OPTIONAL
+ IN OUT EFI_SMBUS_DEVICE_ADDRESS * SlaveAddress OPTIONAL
+ );
+
+/**
+ Get a pointer to the assigned mappings of UDID's to Slave Addresses.
+
+ @param[in] This Pointer to the instance of the EFI_SMBUS_HC_PROTOCOL.
+ @param[in, out] Length Buffer to contain the lenght of the Device Map, it will be updated to
+ contain the number of pairs of UDID's mapped to Slave Addresses.
+ @param[in, out] SmbusDeviceMap Buffer to contian a pointer to the Device Map, it will be updated to
+ point to the first pair in the Device Map
+
+ @retval EFI_SUCCESS Function completed successfully.
+**/
+EFI_STATUS
+EFIAPI
+SmbusGetArpMap (
+ IN CONST EFI_SMBUS_HC_PROTOCOL *This,
+ IN OUT UINTN *Length,
+ IN OUT EFI_SMBUS_DEVICE_MAP **SmbusDeviceMap
+ );
+
+/**
+ Register a callback in the event of a Host Notify command being sent by a
+ specified Slave Device.
+
+ @param[in] This Pointer to the instance of the EFI_SMBUS_HC_PROTOCOL.
+ @param[in] SlaveAddress Address of the device whose Host Notify command we want to
+ trap.
+ @param[in] Data Data of the Host Notify command we want to trap.
+ @param[in] NotifyFunction Function to be called in the event the desired Host Notify
+ command occurs.
+
+ @retval EFI_UNSUPPORTED Unable to create the event needed for notifications.
+ @retval EFI_INVALID_PARAMETER NotifyFunction was NULL.
+ @retval EFI_OUT_OF_RESOURCES Unable to allocate space to register the notification.
+ @retval EFI_SUCCESS Function completed successfully
+**/
+EFI_STATUS
+EFIAPI
+SmbusNotify (
+ IN CONST EFI_SMBUS_HC_PROTOCOL *This,
+ IN EFI_SMBUS_DEVICE_ADDRESS SlaveAddress,
+ IN UINTN Data,
+ IN EFI_SMBUS_NOTIFY_FUNCTION NotifyFunction
+ );
+
+/**
+ Set up a periodic event so that we can check if any Slave Device has sent a
+ Notify ARP Master command.
+
+ @retval EFI_SUCCESS Periodic event successfully set up.
+ @retval Others Failed to set up Periodic event.
+ Error value from CreateEvent().
+ Error value from SetTimer().
+**/
+EFI_STATUS
+InitializePeriodicEvent (
+ VOID
+ );
+
+/**
+ Function to be called every time periodic event happens. This will check if
+ the SMBus Host Controller has received a Host Notify command. If so, it will
+ see if a notification has been reqested on that event and make any callbacks
+ that may be necessary.
+
+ @param[in] Event The periodic event that occured and got us into this callback.
+ @param[in] Context Event context. Will be NULL in this case, since we already have our
+ private data in a module global variable.
+**/
+VOID
+EFIAPI
+PollSmbusNotify (
+ IN EFI_EVENT Event,
+ IN VOID *Context
+ );
+
+/**
+ Issue a prepare ARP command to informs all devices that the ARP Master is starting the ARP process
+
+ @param[in] Private Pointer to the SMBUS_INSTANCE
+
+ @retval EFI_SUCCESS The SMBUS operation is successful
+ @retval Others Something error occurred
+**/
+EFI_STATUS
+SmbusPrepareToArp (
+ IN SMBUS_INSTANCE *Private
+ );
+
+/**
+ Issue a Get UDID (general) command to requests ARP-capable and/or Discoverable devices to
+ return their slave address along with their UDID.
+
+ @param[in] Private Pointer to the SMBUS_INSTANCE
+ @param[in, out] DeviceMap Pointer to SMBUS device map table that slave device return
+
+ @retval EFI_SUCCESS The SMBUS operation is successful
+ @retval Others Something error occurred
+**/
+EFI_STATUS
+SmbusGetUdidGeneral (
+ IN SMBUS_INSTANCE *Private,
+ IN OUT EFI_SMBUS_DEVICE_MAP *DeviceMap
+ );
+
+/**
+ Issue a Assign address command to assigns an address to a specific slave device.
+
+ @param[in] Private Pointer to the SMBUS_INSTANCE
+ @param[in, out] DeviceMap Pointer to SMBUS device map table that send to slave device
+
+ @retval EFI_SUCCESS The SMBUS operation is successful
+ @retval Others Something error occurred
+**/
+EFI_STATUS
+SmbusAssignAddress (
+ IN SMBUS_INSTANCE *Private,
+ IN OUT EFI_SMBUS_DEVICE_MAP *DeviceMap
+ );
+
+/**
+ Do a fully (general) Arp procress to assign the slave address of all ARP-capable device.
+ This function will issue the "Prepare to ARP", "Get UDID" and "Assign Address" commands.
+
+ @param[in] Private Pointer to the SMBUS_INSTANCE
+
+ @retval EFI_OUT_OF_RESOURCES No available address to assign
+ @retval EFI_SUCCESS The function completed successfully
+**/
+EFI_STATUS
+SmbusFullArp (
+ IN SMBUS_INSTANCE *Private
+ );
+
+/**
+ Do a directed Arp procress to assign the slave address of a single ARP-capable device.
+
+ @param[in] Private Pointer to the SMBUS_INSTANCE
+ @param[in] SmbusUdid When doing a directed ARP, ARP the device with this UDID.
+ @param[in, out] SlaveAddress Buffer to store new Slave Address during directed ARP.
+
+ @retval EFI_OUT_OF_RESOURCES DeviceMapEntries is more than Max number of SMBus devices
+ Or there is no available address to assign
+ @retval EFI_SUCCESS The function completed successfully
+**/
+EFI_STATUS
+SmbusDirectedArp (
+ IN SMBUS_INSTANCE *Private,
+ IN EFI_SMBUS_UDID *SmbusUdid,
+ IN OUT EFI_SMBUS_DEVICE_ADDRESS *SlaveAddress
+ );
+
+/**
+ Find an available address to assign
+
+ @param[in] Private Pointer to the SMBUS_INSTANCE
+ @param[in, out] SlaveAddress Buffer to store new Slave Address during directed ARP.
+
+ @retval EFI_OUT_OF_RESOURCES There is no available address to assign
+ @retval EFI_SUCCESS The function completed successfully
+**/
+EFI_STATUS
+GetNextAvailableAddress (
+ IN SMBUS_INSTANCE *Private,
+ IN OUT EFI_SMBUS_DEVICE_ADDRESS *SlaveAddress
+ );
+
+/**
+ Check whether the address is assignable.
+
+ @param[in] Private Pointer to the SMBUS_INSTANCE
+ @param[in] SlaveAddress The Slave Address for checking
+
+ @retval TRUE The address is assignable
+ @retval FALSE The address is not assignable
+**/
+BOOLEAN
+IsAddressAvailable (
+ IN SMBUS_INSTANCE *Private,
+ IN EFI_SMBUS_DEVICE_ADDRESS SlaveAddress
+ );
+
+#endif
diff --git a/Silicon/BroxtonSoC/BroxtonSiPkg/SouthCluster/Smbus/Dxe/PchSmbusArp.c b/Silicon/BroxtonSoC/BroxtonSiPkg/SouthCluster/Smbus/Dxe/PchSmbusArp.c
new file mode 100644
index 000000000..7d616be8a
--- /dev/null
+++ b/Silicon/BroxtonSoC/BroxtonSiPkg/SouthCluster/Smbus/Dxe/PchSmbusArp.c
@@ -0,0 +1,673 @@
+/** @file
+ PCH SMBus Driver, ARP functions.
+
+ Copyright (c) 2018, Intel Corporation. All rights reserved.<BR>
+
+ This program and the accompanying materials
+ are licensed and made available under the terms and conditions of the BSD License
+ which accompanies this distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php.
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+#include "PchSmbus.h"
+
+///
+/// These addresses are reserved by the SMBus 2.0 specification
+///
+static UINT8 mReservedAddress[SMBUS_NUM_RESERVED] = {
+ 0x00,
+ 0x02,
+ 0x04,
+ 0x06,
+ 0x08,
+ 0x0A,
+ 0x0C,
+ 0x0E,
+ 0x10,
+ 0x18,
+ 0x50,
+ 0x6E,
+ 0xC2,
+ 0xF0,
+ 0xF2,
+ 0xF4,
+ 0xF6,
+ 0xF8,
+ 0xFA,
+ 0xFC,
+ 0xFE,
+ 0x12,
+ 0x14,
+ 0x16,
+ 0x58,
+ 0x5A,
+ 0x80,
+ 0x82,
+ 0x84,
+ 0x86,
+ 0x88,
+ 0x90,
+ 0x92,
+ 0x94,
+ 0x96,
+ 0x1A,
+ 0x1C,
+ 0x1E
+};
+
+/**
+ Set Slave address for an SMBus device with a known UDID or perform a general
+ ARP of all devices.
+
+ @param[in] This Pointer to the instance of the EFI_SMBUS_HC_PROTOCOL.
+ @param[in] ArpAll If TRUE, do a full ARP. Otherwise, just ARP the specified UDID.
+ @param[in] SmbusUdid When doing a directed ARP, ARP the device with this UDID.
+ @@param[in, out] SlaveAddress Buffer to store new Slave Address during directed ARP. On output,If
+ ArpAlll == TRUE, this will contain the newly assigned Slave address.
+
+ @retval EFI_SUCCESS The function completed successfully
+ @retval EFI_INVALID_PARAMETER ArpAll == FALSE but SmbusUdid or SlaveAddress are NULL.
+ @retval Others Return value from SmbusFullArp() or SmbusDirectedArp().
+**/
+EFI_STATUS
+EFIAPI
+SmbusArpDevice (
+ IN CONST EFI_SMBUS_HC_PROTOCOL *This,
+ IN BOOLEAN ArpAll,
+ IN EFI_SMBUS_UDID * SmbusUdid, OPTIONAL
+ IN OUT EFI_SMBUS_DEVICE_ADDRESS * SlaveAddress OPTIONAL
+ )
+{
+ DEBUG ((DEBUG_INFO, "SmbusArpDevice() Start\n"));
+
+ InitializeSmbusRegisters ();
+
+ DEBUG ((DEBUG_INFO, "SmbusArpDevice() End\n"));
+
+ if (ArpAll) {
+ return SmbusFullArp (mSmbusContext);
+ } else {
+ if ((SmbusUdid == NULL) || (SlaveAddress == NULL)) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ return SmbusDirectedArp (mSmbusContext, SmbusUdid, SlaveAddress);
+ }
+}
+
+/**
+ Get a pointer to the assigned mappings of UDID's to Slave Addresses.
+
+ @param[in] This Pointer to the instance of the EFI_SMBUS_HC_PROTOCOL.
+ @param[in, out] Length Buffer to contain the lenght of the Device Map, it will be updated to
+ contain the number of pairs of UDID's mapped to Slave Addresses.
+ @param[in, out] SmbusDeviceMap Buffer to contian a pointer to the Device Map, it will be updated to
+ point to the first pair in the Device Map
+
+ @retval EFI_SUCCESS Function completed successfully.
+**/
+EFI_STATUS
+EFIAPI
+SmbusGetArpMap (
+ IN CONST EFI_SMBUS_HC_PROTOCOL *This,
+ IN OUT UINTN *Length,
+ IN OUT EFI_SMBUS_DEVICE_MAP **SmbusDeviceMap
+ )
+{
+ *Length = mSmbusContext->DeviceMapEntries * sizeof (EFI_SMBUS_DEVICE_MAP);
+ *SmbusDeviceMap = mSmbusContext->DeviceMap;
+ return EFI_SUCCESS;
+}
+
+/**
+ Register a callback in the event of a Host Notify command being sent by a
+ specified Slave Device.
+
+ @param[in] This Pointer to the instance of the EFI_SMBUS_HC_PROTOCOL.
+ @param[in] SlaveAddress Address of the device whose Host Notify command we want to
+ trap.
+ @param[in] Data Data of the Host Notify command we want to trap.
+ @param[in] NotifyFunction Function to be called in the event the desired Host Notify
+ command occurs.
+
+ @retval EFI_UNSUPPORTED Unable to create the event needed for notifications.
+ @retval EFI_INVALID_PARAMETER NotifyFunction was NULL.
+ @retval EFI_OUT_OF_RESOURCES Unable to allocate space to register the notification.
+ @retval EFI_SUCCESS Function completed successfully
+**/
+EFI_STATUS
+EFIAPI
+SmbusNotify (
+ IN CONST EFI_SMBUS_HC_PROTOCOL *This,
+ IN EFI_SMBUS_DEVICE_ADDRESS SlaveAddress,
+ IN UINTN Data,
+ IN EFI_SMBUS_NOTIFY_FUNCTION NotifyFunction
+ )
+{
+ EFI_STATUS Status;
+ SMBUS_NOTIFY_FUNCTION_LIST_NODE *NewNode;
+
+ DEBUG ((DEBUG_INFO, "SmbusNotify() Start\n"));
+
+ if (NotifyFunction == NULL) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ NewNode = (SMBUS_NOTIFY_FUNCTION_LIST_NODE *) AllocatePool (sizeof (SMBUS_NOTIFY_FUNCTION_LIST_NODE));
+ if (NewNode == NULL) {
+ DEBUG ((DEBUG_ERROR, "Failed to allocate memory for NewNode! \n"));
+ return EFI_OUT_OF_RESOURCES;
+ }
+ //
+ // If this is the first notification request, start an event to periodically
+ // check for a Notify master command.
+ //
+ if (!mSmbusContext->NotificationEvent) {
+ Status = InitializePeriodicEvent ();
+ if (EFI_ERROR (Status)) {
+ FreePool (NewNode);
+ return EFI_UNSUPPORTED;
+ }
+ }
+
+ NewNode->Signature = PCH_SMBUS_PRIVATE_DATA_SIGNATURE;
+ NewNode->SlaveAddress.SmbusDeviceAddress = SlaveAddress.SmbusDeviceAddress;
+ NewNode->Data = Data;
+ NewNode->NotifyFunction = NotifyFunction;
+
+ InsertTailList (&mSmbusContext->NotifyFunctionList, &NewNode->Link);
+
+ DEBUG ((DEBUG_INFO, "SmbusNotify() End\n"));
+ return EFI_SUCCESS;
+}
+
+/**
+ Set up a periodic event so that we can check if any Slave Device has sent a
+ Notify ARP Master command.
+
+ @retval EFI_SUCCESS Periodic event successfully set up.
+ @retval Others Failed to set up Periodic event.
+ Error value from CreateEvent().
+ Error value from SetTimer().
+**/
+EFI_STATUS
+InitializePeriodicEvent (
+ VOID
+ )
+{
+ EFI_STATUS Status;
+
+ Status = gBS->CreateEvent (
+ (EVT_TIMER | EVT_NOTIFY_SIGNAL),
+ TPL_CALLBACK,
+ PollSmbusNotify,
+ NULL,
+ &mSmbusContext->NotificationEvent
+ );
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+
+ Status = gBS->SetTimer (
+ mSmbusContext->NotificationEvent,
+ TimerPeriodic,
+ 1000 * MILLISECOND
+ );
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+
+ return EFI_SUCCESS;
+}
+
+/**
+ Function to be called every time periodic event happens. This will check if
+ the SMBus Host Controller has received a Host Notify command. If so, it will
+ see if a notification has been reqested on that event and make any callbacks
+ that may be necessary.
+
+ @param[in] Event The periodic event that occured and got us into this callback.
+ @param[in] Context Event context. Will be NULL in this case, since we already have our
+ private data in a module global variable.
+**/
+VOID
+EFIAPI
+PollSmbusNotify (
+ IN EFI_EVENT Event,
+ IN VOID *Context
+ )
+{
+ LIST_ENTRY *Link;
+ EFI_SMBUS_DEVICE_ADDRESS SlaveAddress;
+ SMBUS_NOTIFY_FUNCTION_LIST_NODE *Node;
+ UINT8 SstsReg;
+ UINTN Data;
+
+ DEBUG ((DEBUG_INFO, "PollSmbusNotify() Start\n"));
+
+ InitializeSmbusRegisters ();
+
+ SstsReg = SmbusIoRead (R_SMBUS_SSTS);
+ if (!(SstsReg & B_SMBUS_HOST_NOTIFY_STS)) {
+ //
+ // Host Notify has not been received
+ //
+ return;
+ }
+
+ //
+ // There was a Host Notify, see if any one wants to know about it
+ //
+ SlaveAddress.SmbusDeviceAddress = (SmbusIoRead (R_SMBUS_NDA)) >> 1;
+
+ Link = GetFirstNode (&mSmbusContext->NotifyFunctionList);
+
+ while (!IsNull (&mSmbusContext->NotifyFunctionList, Link)) {
+ Node = SMBUS_NOTIFY_FUNCTION_LIST_NODE_FROM_LINK (Link);
+
+ if (Node->SlaveAddress.SmbusDeviceAddress == SlaveAddress.SmbusDeviceAddress) {
+ Data = (SmbusIoRead (R_SMBUS_NDHB) << 8) + (SmbusIoRead (R_SMBUS_NDLB));
+ if ((UINT16) Node->Data == (UINT16) Data) {
+ //
+ // We have a match, notify the requested function
+ //
+ Node->NotifyFunction (SlaveAddress, Data);
+ }
+ }
+
+ Link = GetNextNode (&mSmbusContext->NotifyFunctionList, &Node->Link);
+ }
+
+ //
+ // Clear the Notify Status bit and exit.
+ //
+ SmbusIoWrite (R_SMBUS_SSTS, B_SMBUS_HOST_NOTIFY_STS);
+
+ DEBUG ((DEBUG_INFO, "PollSmbusNotify() End\n"));
+
+ return;
+}
+
+/**
+ Issue a prepare ARP command to informs all devices that the ARP Master is starting the ARP process
+
+ @param[in] Private Pointer to the SMBUS_INSTANCE
+
+ @retval EFI_SUCCESS The SMBUS operation is successful
+ @retval Others Something error occurred
+**/
+EFI_STATUS
+SmbusPrepareToArp (
+ IN SMBUS_INSTANCE *Private
+ )
+{
+ EFI_SMBUS_DEVICE_ADDRESS SlaveAddress;
+ EFI_STATUS Status;
+ UINTN Length;
+ UINT8 Buffer;
+
+ DEBUG ((DEBUG_INFO, "SmbusPrepareToArp() Start\n"));
+
+ SlaveAddress.SmbusDeviceAddress = SMBUS_ADDRESS_ARP;
+ Length = 1;
+ Buffer = SMBUS_DATA_PREPARE_TO_ARP;
+
+ Status = SmbusExec (
+ SlaveAddress,
+ 0,
+ EfiSmbusSendByte,
+ TRUE,
+ &Length,
+ &Buffer
+ );
+
+ DEBUG ((DEBUG_INFO, "SmbusPrepareToArp() End\n"));
+
+ return Status;
+}
+
+/**
+ Issue a Get UDID (general) command to requests ARP-capable and/or Discoverable devices to
+ return their slave address along with their UDID.
+
+ @param[in] Private Pointer to the SMBUS_INSTANCE
+ @param[in, out] DeviceMap Pointer to SMBUS device map table that slave device return
+
+ @retval EFI_SUCCESS The SMBUS operation is successful
+ @retval Others Something error occurred
+**/
+EFI_STATUS
+SmbusGetUdidGeneral (
+ IN SMBUS_INSTANCE *Private,
+ IN OUT EFI_SMBUS_DEVICE_MAP *DeviceMap
+ )
+{
+ EFI_SMBUS_DEVICE_ADDRESS SlaveAddress;
+ EFI_STATUS Status;
+ UINTN Length;
+ UINT8 Buffer[SMBUS_GET_UDID_LENGTH];
+
+ DEBUG ((DEBUG_INFO, "SmbusGetUdidGeneral() Start\n"));
+
+ SlaveAddress.SmbusDeviceAddress = SMBUS_ADDRESS_ARP;
+ Length = SMBUS_GET_UDID_LENGTH;
+
+ Status = SmbusExec (
+ SlaveAddress,
+ SMBUS_DATA_GET_UDID_GENERAL,
+ EfiSmbusReadBlock,
+ TRUE,
+ &Length,
+ Buffer
+ );
+
+ if (!EFI_ERROR (Status)) {
+ if (Length == SMBUS_GET_UDID_LENGTH) {
+ DeviceMap->SmbusDeviceUdid.DeviceCapabilities = Buffer[0];
+ DeviceMap->SmbusDeviceUdid.VendorRevision = Buffer[1];
+ DeviceMap->SmbusDeviceUdid.VendorId = (UINT16) ((Buffer[2] << 8) + Buffer[3]);
+ DeviceMap->SmbusDeviceUdid.DeviceId = (UINT16) ((Buffer[4] << 8) + Buffer[5]);
+ DeviceMap->SmbusDeviceUdid.Interface = (UINT16) ((Buffer[6] << 8) + Buffer[7]);
+ DeviceMap->SmbusDeviceUdid.SubsystemVendorId = (UINT16) ((Buffer[8] << 8) + Buffer[9]);
+ DeviceMap->SmbusDeviceUdid.SubsystemDeviceId = (UINT16) ((Buffer[10] << 8) + Buffer[11]);
+ DeviceMap->SmbusDeviceUdid.VendorSpecificId = (UINT32) ((Buffer[12] << 24) + (Buffer[13] << 16) + (Buffer[14] << 8) + Buffer[15]);
+ DeviceMap->SmbusDeviceAddress.SmbusDeviceAddress = (UINT8) (Buffer[16] >> 1);
+ } else {
+ Status = EFI_DEVICE_ERROR;
+ }
+ }
+
+ DEBUG ((DEBUG_INFO, "SmbusGetUdidGeneral() End\n"));
+
+ return Status;
+}
+
+/**
+ Issue a Assign address command to assigns an address to a specific slave device.
+
+ @param[in] Private Pointer to the SMBUS_INSTANCE
+ @param[in, out] DeviceMap Pointer to SMBus device map table that send to slave device
+
+ @retval EFI_SUCCESS The SMBus operation is successful
+ @retval Others Something error occurred
+**/
+EFI_STATUS
+SmbusAssignAddress (
+ IN SMBUS_INSTANCE *Private,
+ IN OUT EFI_SMBUS_DEVICE_MAP *DeviceMap
+ )
+{
+ EFI_SMBUS_DEVICE_ADDRESS SlaveAddress;
+ EFI_STATUS Status;
+ UINTN Length;
+ UINT8 Buffer[SMBUS_GET_UDID_LENGTH];
+
+ DEBUG ((DEBUG_INFO, "SmbusAssignAddress() Start\n"));
+
+ Buffer[0] = DeviceMap->SmbusDeviceUdid.DeviceCapabilities;
+ Buffer[1] = DeviceMap->SmbusDeviceUdid.VendorRevision;
+ Buffer[2] = (UINT8) (DeviceMap->SmbusDeviceUdid.VendorId >> 8);
+ Buffer[3] = (UINT8) (DeviceMap->SmbusDeviceUdid.VendorId);
+ Buffer[4] = (UINT8) (DeviceMap->SmbusDeviceUdid.DeviceId >> 8);
+ Buffer[5] = (UINT8) (DeviceMap->SmbusDeviceUdid.DeviceId);
+ Buffer[6] = (UINT8) (DeviceMap->SmbusDeviceUdid.Interface >> 8);
+ Buffer[7] = (UINT8) (DeviceMap->SmbusDeviceUdid.Interface);
+ Buffer[8] = (UINT8) (DeviceMap->SmbusDeviceUdid.SubsystemVendorId >> 8);
+ Buffer[9] = (UINT8) (DeviceMap->SmbusDeviceUdid.SubsystemVendorId);
+ Buffer[10] = (UINT8) (DeviceMap->SmbusDeviceUdid.SubsystemDeviceId >> 8);
+ Buffer[11] = (UINT8) (DeviceMap->SmbusDeviceUdid.SubsystemDeviceId);
+ Buffer[12] = (UINT8) (DeviceMap->SmbusDeviceUdid.VendorSpecificId >> 24);
+ Buffer[13] = (UINT8) (DeviceMap->SmbusDeviceUdid.VendorSpecificId >> 16);
+ Buffer[14] = (UINT8) (DeviceMap->SmbusDeviceUdid.VendorSpecificId >> 8);
+ Buffer[15] = (UINT8) (DeviceMap->SmbusDeviceUdid.VendorSpecificId);
+ Buffer[16] = (UINT8) (DeviceMap->SmbusDeviceAddress.SmbusDeviceAddress << 1);
+
+ SlaveAddress.SmbusDeviceAddress = SMBUS_ADDRESS_ARP;
+ Length = SMBUS_GET_UDID_LENGTH;
+
+ Status = SmbusExec (
+ SlaveAddress,
+ SMBUS_DATA_ASSIGN_ADDRESS,
+ EfiSmbusWriteBlock,
+ TRUE,
+ &Length,
+ Buffer
+ );
+
+ DEBUG ((DEBUG_INFO, "SmbusAssignAddress() End\n"));
+
+ return Status;
+}
+
+/**
+ Do a fully (general) Arp procress to assign the slave address of all ARP-capable device.
+ This function will issue issue the "Prepare to ARP", "Get UDID" and "Assign Address" commands.
+
+ @param[in] Private Pointer to the SMBUS_INSTANCE
+
+ @retval EFI_OUT_OF_RESOURCES No available address to assign
+ @retval EFI_SUCCESS The function completed successfully
+**/
+EFI_STATUS
+SmbusFullArp (
+ IN SMBUS_INSTANCE *Private
+ )
+{
+ EFI_STATUS Status;
+ EFI_SMBUS_DEVICE_MAP *CurrentDeviceMap;
+
+ DEBUG ((DEBUG_INFO, "SmbusFullArp() Start\n"));
+
+ Status = SmbusPrepareToArp (Private);
+ if (EFI_ERROR (Status)) {
+ if (Status == EFI_DEVICE_ERROR) {
+ //
+ // ARP is complete
+ //
+ return EFI_SUCCESS;
+ } else {
+ return Status;
+ }
+ }
+ //
+ // Main loop to ARP all ARP-capable devices
+ //
+ do {
+ CurrentDeviceMap = &Private->DeviceMap[Private->DeviceMapEntries];
+ Status = SmbusGetUdidGeneral (Private, CurrentDeviceMap);
+ if (EFI_ERROR (Status)) {
+ break;
+ }
+
+ if (CurrentDeviceMap->SmbusDeviceAddress.SmbusDeviceAddress == (0xFF >> 1)) {
+ //
+ // If address is unassigned, assign it
+ //
+ Status = GetNextAvailableAddress (
+ Private,
+ &CurrentDeviceMap->SmbusDeviceAddress
+ );
+ if (EFI_ERROR (Status)) {
+ return EFI_OUT_OF_RESOURCES;
+ }
+ } else if (((CurrentDeviceMap->SmbusDeviceUdid.DeviceCapabilities) & 0xC0) != 0) {
+ //
+ // if address is not fixed, check if the current address is available
+ //
+ if (!IsAddressAvailable (
+ Private,
+ CurrentDeviceMap->SmbusDeviceAddress
+ )) {
+ //
+ // if currently assigned address is already used, get a new one
+ //
+ Status = GetNextAvailableAddress (
+ Private,
+ &CurrentDeviceMap->SmbusDeviceAddress
+ );
+ if (EFI_ERROR (Status)) {
+ return EFI_OUT_OF_RESOURCES;
+ }
+ }
+ }
+
+ Status = SmbusAssignAddress (Private, CurrentDeviceMap);
+ if (EFI_ERROR (Status)) {
+ //
+ // If there was a device error, just continue on and try again.
+ // Other errors should be reported.
+ //
+ if (Status != EFI_DEVICE_ERROR) {
+ return Status;
+ }
+ } else {
+ //
+ // If there was no error, the address was assigned and we must update our
+ // records.
+ //
+ Private->DeviceMapEntries++;
+ }
+
+ } while (Private->DeviceMapEntries < MAX_SMBUS_DEVICES);
+
+ DEBUG ((DEBUG_INFO, "SmbusFullArp() End\n"));
+
+ return EFI_SUCCESS;
+}
+
+/**
+ Do a directed Arp procress to assign the slave address of a single ARP-capable device.
+
+ @param[in] Private Pointer to the SMBUS_INSTANCE
+ @param[in] SmbusUdid When doing a directed ARP, ARP the device with this UDID.
+ @param[in, out] SlaveAddress Buffer to store new Slave Address during directed ARP.
+
+ @retval EFI_OUT_OF_RESOURCES DeviceMapEntries is more than Max number of SMBus devices
+ Or there is no available address to assign
+ @retval EFI_SUCCESS The function completed successfully
+**/
+EFI_STATUS
+SmbusDirectedArp (
+ IN SMBUS_INSTANCE *Private,
+ IN EFI_SMBUS_UDID *SmbusUdid,
+ IN OUT EFI_SMBUS_DEVICE_ADDRESS *SlaveAddress
+ )
+{
+ EFI_STATUS Status;
+ EFI_SMBUS_DEVICE_MAP *CurrentDeviceMap;
+
+ DEBUG ((DEBUG_INFO, "SmbusDirectedArp() Start\n"));
+
+ if (Private->DeviceMapEntries >= MAX_SMBUS_DEVICES) {
+ return EFI_OUT_OF_RESOURCES;
+ }
+
+ CurrentDeviceMap = &Private->DeviceMap[Private->DeviceMapEntries];
+
+ //
+ // Find an available address to assign
+ //
+ Status = GetNextAvailableAddress (
+ Private,
+ &CurrentDeviceMap->SmbusDeviceAddress
+ );
+ if (EFI_ERROR (Status)) {
+ return EFI_OUT_OF_RESOURCES;
+ }
+
+ CurrentDeviceMap->SmbusDeviceUdid.DeviceCapabilities = SmbusUdid->DeviceCapabilities;
+ CurrentDeviceMap->SmbusDeviceUdid.DeviceId = SmbusUdid->DeviceId;
+ CurrentDeviceMap->SmbusDeviceUdid.Interface = SmbusUdid->Interface;
+ CurrentDeviceMap->SmbusDeviceUdid.SubsystemDeviceId = SmbusUdid->SubsystemDeviceId;
+ CurrentDeviceMap->SmbusDeviceUdid.SubsystemVendorId = SmbusUdid->SubsystemVendorId;
+ CurrentDeviceMap->SmbusDeviceUdid.VendorId = SmbusUdid->VendorId;
+ CurrentDeviceMap->SmbusDeviceUdid.VendorRevision = SmbusUdid->VendorRevision;
+ CurrentDeviceMap->SmbusDeviceUdid.VendorSpecificId = SmbusUdid->VendorSpecificId;
+
+ Status = SmbusAssignAddress (Private, CurrentDeviceMap);
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+
+ Private->DeviceMapEntries++;
+ SlaveAddress->SmbusDeviceAddress = CurrentDeviceMap->SmbusDeviceAddress.SmbusDeviceAddress;
+
+ DEBUG ((DEBUG_INFO, "SmbusDirectedArp() End\n"));
+
+ return EFI_SUCCESS;
+}
+
+/**
+ Find an available address to assign
+
+ @param[in] Private Pointer to the SMBUS_INSTANCE
+ @param[in, out] SlaveAddress Buffer to store new Slave Address during directed ARP.
+
+ @retval EFI_OUT_OF_RESOURCES There is no available address to assign
+ @retval EFI_SUCCESS The function completed successfully
+**/
+EFI_STATUS
+GetNextAvailableAddress (
+ IN SMBUS_INSTANCE *Private,
+ IN OUT EFI_SMBUS_DEVICE_ADDRESS *SlaveAddress
+ )
+{
+ for (SlaveAddress->SmbusDeviceAddress = 0x03;
+ SlaveAddress->SmbusDeviceAddress < 0x7F;
+ SlaveAddress->SmbusDeviceAddress++
+ ) {
+ if (IsAddressAvailable (Private, *SlaveAddress)) {
+ return EFI_SUCCESS;
+ }
+ }
+
+ return EFI_OUT_OF_RESOURCES;
+}
+
+/**
+ Check whether the address is assignable.
+
+ @param[in] Private Pointer to the SMBUS_INSTANCE
+ @param[in] SlaveAddress The Slave Address for checking
+
+ @retval TRUE The address is assignable
+ @retval FALSE The address is not assignable
+**/
+BOOLEAN
+IsAddressAvailable (
+ IN SMBUS_INSTANCE *Private,
+ IN EFI_SMBUS_DEVICE_ADDRESS SlaveAddress
+ )
+{
+ UINT8 Index;
+
+ //
+ // See if we have already assigned this address to a device
+ //
+ for (Index = 0; Index < Private->DeviceMapEntries; Index++) {
+ if (SlaveAddress.SmbusDeviceAddress == Private->DeviceMap[Index].SmbusDeviceAddress.SmbusDeviceAddress) {
+ return FALSE;
+ }
+ }
+ //
+ // See if this address is claimed by a platform non-ARP-capable device
+ //
+ for (Index = 0; Index < Private->PlatformNumRsvd; Index++) {
+ if ((SlaveAddress.SmbusDeviceAddress << 1) == Private->PlatformRsvdAddr[Index]) {
+ return FALSE;
+ }
+ }
+ //
+ // See if this is a reserved address
+ //
+ for (Index = 0; Index < SMBUS_NUM_RESERVED; Index++) {
+ if ((SlaveAddress.SmbusDeviceAddress << 1) == (UINTN) mReservedAddress[Index]) {
+ return FALSE;
+ }
+ }
+
+ return TRUE;
+}
diff --git a/Silicon/BroxtonSoC/BroxtonSiPkg/SouthCluster/Smbus/Dxe/PchSmbusDxe.inf b/Silicon/BroxtonSoC/BroxtonSiPkg/SouthCluster/Smbus/Dxe/PchSmbusDxe.inf
new file mode 100644
index 000000000..ef083d09b
--- /dev/null
+++ b/Silicon/BroxtonSoC/BroxtonSiPkg/SouthCluster/Smbus/Dxe/PchSmbusDxe.inf
@@ -0,0 +1,63 @@
+## @file
+# SMBus driver.
+#
+# Copyright (c) 2018, Intel Corporation. All rights reserved.<BR>
+#
+# This program and the accompanying materials
+# are licensed and made available under the terms and conditions of the BSD License
+# which accompanies this distribution. The full text of the license may be found at
+# http://opensource.org/licenses/bsd-license.php.
+#
+# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+#
+##
+
+[Defines]
+ INF_VERSION = 0x00010005
+ BASE_NAME = ScSmbusDxe
+ FILE_GUID = E052D8A6-224A-4c32-8D37-2E0AE162364D
+ MODULE_TYPE = DXE_DRIVER
+ VERSION_STRING = 1.0
+ ENTRY_POINT = InitializeScSmbus
+
+#
+# The following information is for reference only and not required by the build tools.
+#
+# VALID_ARCHITECTURES = IA32 X64 EBC
+
+[Sources]
+ PchSmbusEntry.c
+ PchSmbus.h
+ PchSmbusArp.c
+
+[Packages]
+ MdePkg/MdePkg.dec
+ BroxtonSiPkg/BroxtonSiPkg.dec
+ BroxtonSiPkg/BroxtonSiPrivate.dec
+
+[LibraryClasses]
+ UefiDriverEntryPoint
+ IoLib
+ BaseLib
+ DebugLib
+ TimerLib
+ UefiBootServicesTableLib
+ ScPlatformLib
+ UefiLib
+ HobLib
+ BaseMemoryLib
+ ScSmbusCommonLib
+ ConfigBlockLib
+
+[Protocols]
+ gEfiSmbusHcProtocolGuid ## PRODUCES
+
+[Guids]
+ gEfiSmbusArpMapGuid ## UNDEFINED
+ gEfiHobListGuid ## UNDEFINED
+ gScPolicyHobGuid ## UNDEFINED
+ gSmbusConfigGuid
+
+[Depex]
+ TRUE
\ No newline at end of file
diff --git a/Silicon/BroxtonSoC/BroxtonSiPkg/SouthCluster/Smbus/Dxe/PchSmbusEntry.c b/Silicon/BroxtonSoC/BroxtonSiPkg/SouthCluster/Smbus/Dxe/PchSmbusEntry.c
new file mode 100644
index 000000000..6ae16f343
--- /dev/null
+++ b/Silicon/BroxtonSoC/BroxtonSiPkg/SouthCluster/Smbus/Dxe/PchSmbusEntry.c
@@ -0,0 +1,155 @@
+/** @file
+ PCH SMBus Driver.
+
+ Copyright (c) 2018, Intel Corporation. All rights reserved.<BR>
+
+ This program and the accompanying materials
+ are licensed and made available under the terms and conditions of the BSD License
+ which accompanies this distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php.
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+#include "PchSmbus.h"
+#include <Library/ConfigBlockLib.h>
+
+extern EFI_GUID gEfiSmbusArpMapGuid;
+
+/**
+ Execute an SMBus operation
+
+ @param[in] This The protocol instance
+ @param[in] SlaveAddress The address of the SMBUS slave device
+ @param[in] Command The SMBUS command
+ @param[in] Operation Which SMBus protocol will be issued
+ @param[in] PecCheck If Packet Error Code Checking is to be used
+ @param[in, out] Length Length of data
+ @param[in, out] Buffer Data buffer
+
+ @retval EFI_SUCCESS The SMBUS operation is successful
+ @retval Others Something error occurred
+**/
+EFI_STATUS
+EFIAPI
+SmbusExecute (
+ IN CONST EFI_SMBUS_HC_PROTOCOL *This,
+ IN EFI_SMBUS_DEVICE_ADDRESS SlaveAddress,
+ IN EFI_SMBUS_DEVICE_COMMAND Command,
+ IN EFI_SMBUS_OPERATION Operation,
+ IN BOOLEAN PecCheck,
+ IN OUT UINTN *Length,
+ IN OUT VOID *Buffer
+ )
+{
+ DEBUG ((DEBUG_INFO, "SmbusExecute() Start, SmbusDeviceAddress=%x, Command=%x, Operation=%x\n", (SlaveAddress.SmbusDeviceAddress << 1), Command, Operation));
+ InitializeSmbusRegisters ();
+
+ return SmbusExec (
+ SlaveAddress,
+ Command,
+ Operation,
+ PecCheck,
+ Length,
+ Buffer
+ );
+}
+
+/**
+ <b>SMBus DXE Module Entry Point</b>\n
+ - <b>Introduction</b>\n
+ The SMBus module is a DXE driver that provides a standard way to execute an SMBus command.
+
+ - @pre
+ - @link SC_POLICY SC_POLICY_HOB @endlink
+ - This module uses the parameters in SmbusConfig for platform reserved (non ARP capable) addresses.
+
+ - @result
+ The SMBus driver produces EFI_SMBUS_HC_PROTOCOL which is documented in the SMBus Host Controller
+ Protocol Specification.
+
+ @param[in] ImageHandle ImageHandle of this module
+ @param[in] SystemTable EFI System Table
+
+ @retval EFI_SUCCESS Driver initializes successfully
+ @retval Others Some error occurred
+**/
+EFI_STATUS
+EFIAPI
+InitializeScSmbus (
+ IN EFI_HANDLE ImageHandle,
+ IN EFI_SYSTEM_TABLE *SystemTable
+ )
+{
+ SC_POLICY_HOB *ScPolicy;
+ EFI_STATUS Status;
+ UINTN DataSize;
+ VOID *Data;
+ EFI_PEI_HOB_POINTERS HobList;
+ SC_SMBUS_CONFIG *SmbusConfig;
+
+ DEBUG ((DEBUG_INFO, "InitializeScSmbus() Start\n"));
+
+ HobList.Guid = GetFirstGuidHob (&gScPolicyHobGuid);
+ ASSERT (HobList.Guid != NULL);
+ ScPolicy = GET_GUID_HOB_DATA (HobList.Guid);
+ Status = GetConfigBlock ((VOID *) ScPolicy, &gSmbusConfigGuid, (VOID *) &SmbusConfig);
+ ASSERT_EFI_ERROR (Status);
+
+ mSmbusContext = AllocateZeroPool (sizeof (SMBUS_INSTANCE));
+ if (mSmbusContext == NULL) {
+ ASSERT (FALSE);
+ return EFI_OUT_OF_RESOURCES;
+ }
+
+ mSmbusContext->Signature = PCH_SMBUS_PRIVATE_DATA_SIGNATURE;
+ mSmbusContext->IoDone = IoDone;
+ mSmbusContext->SmbusIoRead = SmbusIoRead;
+ mSmbusContext->SmbusIoWrite = SmbusIoWrite;
+ mSmbusContext->SmbusController.Execute = SmbusExecute;
+ mSmbusContext->SmbusController.ArpDevice = SmbusArpDevice;
+ mSmbusContext->SmbusController.GetArpMap = SmbusGetArpMap;
+ mSmbusContext->SmbusController.Notify = SmbusNotify;
+ mSmbusContext->PlatformNumRsvd = SmbusConfig->NumRsvdSmbusAddresses;
+ mSmbusContext->PlatformRsvdAddr = SmbusConfig->RsvdSmbusAddressTable;
+ ASSERT (mSmbusContext->PlatformNumRsvd <= SC_MAX_SMBUS_RESERVED_ADDRESS);
+
+ //
+ // See if PEI already ARPed any devices, and if so, update our device map.
+ //
+ // Get Hob list
+ //
+ Status = EfiGetSystemConfigurationTable (&gEfiHobListGuid, (VOID **) &HobList.Raw);
+ ASSERT_EFI_ERROR (Status);
+
+ HobList.Raw = GetNextGuidHob (&gEfiSmbusArpMapGuid, HobList.Raw);
+ //
+ // If we found the right hob, store the information. Otherwise, continue.
+ //
+ if (HobList.Raw != NULL) {
+ Data = (VOID *) ((UINT8 *) (&HobList.Guid->Name) + sizeof (EFI_GUID));
+ DataSize = HobList.Header->HobLength - sizeof (EFI_HOB_GUID_TYPE);
+ CopyMem (mSmbusContext->DeviceMap, Data, DataSize);
+ mSmbusContext->DeviceMapEntries = (UINT8) (DataSize / sizeof (EFI_SMBUS_DEVICE_MAP));
+ }
+ //
+ // Initialize the NotifyFunctionList
+ //
+ InitializeListHead (&mSmbusContext->NotifyFunctionList);
+
+ //
+ // Install the SMBus interface
+ //
+ Status = gBS->InstallMultipleProtocolInterfaces (
+ &mSmbusContext->Handle,
+ &gEfiSmbusHcProtocolGuid,
+ &mSmbusContext->SmbusController,
+ NULL
+ );
+ ASSERT_EFI_ERROR (Status);
+
+ DEBUG ((DEBUG_INFO, "InitializeScSmbus() End\n"));
+
+ return EFI_SUCCESS;
+}
--
2.14.1.windows.1
^ permalink raw reply related [flat|nested] only message in thread
only message in thread, other threads:[~2018-02-13 5:49 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2018-02-13 5:55 [Patch][edk2-platforms/devel-MinnowBoard3-UDK2017] SMBus Host driver zwei4
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox