From: Leif Lindholm <leif.lindholm@linaro.org>
To: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: edk2-devel@lists.01.org
Subject: Re: [PATCH edk2-platforms v2 2/7] Platform/NinetySixBoards: introduce package and mezzanine protocol
Date: Thu, 22 Feb 2018 13:15:53 +0000 [thread overview]
Message-ID: <20180222131553.dixmsbldbufxdgat@bivouac.eciton.net> (raw)
In-Reply-To: <20180220174944.525-3-ard.biesheuvel@linaro.org>
On Tue, Feb 20, 2018 at 05:49:39PM +0000, Ard Biesheuvel wrote:
> Introduce the mezzanine protocol and the 96boards package defining
> the PCDs and GUIDs that may be used by implementations of the
> protocol.
This looks really good. Comments below are all style related.
> Contributed-under: TianoCore Contribution Agreement 1.1
> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
> ---
> Platform/NinetySixBoards/Include/Protocol/Mezzanine.h | 71 ++++++++++++++++++++
> Platform/NinetySixBoards/NinetySixBoards.dec | 67 ++++++++++++++++++
Why NinetySixBoards? Is 96Boards ENOTENOUGHCAMEL?
> 2 files changed, 138 insertions(+)
>
> diff --git a/Platform/NinetySixBoards/Include/Protocol/Mezzanine.h b/Platform/NinetySixBoards/Include/Protocol/Mezzanine.h
> new file mode 100644
> index 000000000000..7869ea979b48
> --- /dev/null
> +++ b/Platform/NinetySixBoards/Include/Protocol/Mezzanine.h
> @@ -0,0 +1,71 @@
> +/** @file
> +
> + Copyright (c) 2018, Linaro, Ltd. All rights reserved.<BR>
> +
> + This program and the accompanying materials are licensed and made available
> + under the terms and conditions of the BSD License which accompanies this
> + distribution. The full text of the license may be found at
> + http://opensource.org/licenses/bsd-license.php
> +
> + THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> + WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
> +
> +**/
> +
> +#ifndef _MEZZANINE_H_
> +#define _MEZZANINE_H_
Maybe do the fulle _96BOARDS_MEZZANINE_H_?
> +
> +#include <Pi/PiI2c.h>
> +#include <Protocol/SpiConfiguration.h>
> +
> +#define MEZZANINE_PROTOCOL_GUID \
> + { 0xf0467a37, 0x3436, 0x40ef, { 0x94, 0x09, 0x4d, 0x1d, 0x7f, 0x51, 0x06, 0xd3 } }
> +
> +typedef struct _MEZZANINE_PROTOCOL MEZZANINE_PROTOCOL;
> +
> +/**
> + Apply the mezzanine's DT overlay
> +
> + @param[in] This Pointer to the MEZZANINE_PROTOCOL instance.
> + @param[in,out] Dtb Pointer to the device tree blob
> +
> + @return EFI_SUCCESS Operation succeeded.
> + @return other An error has occurred.
> +**/
> +typedef
> +EFI_STATUS
> +(EFIAPI *APPLY_DEVICE_TREE_OVERLAY) (
> + IN MEZZANINE_PROTOCOL *This,
> + IN OUT VOID *Dtb
> + );
> +
> +struct _MEZZANINE_PROTOCOL {
> + //
> + // Get the device tree overlay for this mezzanine board
> + //
> + APPLY_DEVICE_TREE_OVERLAY ApplyDeviceTreeOverlay;
> + //
> + // The number of devices on LS connector I2C bus #0
> + //
> + UINT32 I2c0NumDevices;
> + //
> + // The number of devices on LS connector I2C bus #1
> + //
> + UINT32 I2c1NumDevices;
> + //
> + // Linear array of I2C devices on LS connector bus #0
> + //
> + CONST EFI_I2C_DEVICE *I2c0DeviceArray;
> + //
> + // Linear array of I2C devices on LS connector bus #0
> + //
> + CONST EFI_I2C_DEVICE *I2c1DeviceArray;
> + //
> + // NULL terminated linked list of SPI devices attached to the LS connector
> + //
> + CONST EFI_SPI_PERIPHERAL *SpiDeviceLinkedList;
> +};
> +
> +extern EFI_GUID gNinetySixBoardsMezzanineProtocolGuid;
> +
> +#endif // _MEZZANINE_H_
> diff --git a/Platform/NinetySixBoards/NinetySixBoards.dec b/Platform/NinetySixBoards/NinetySixBoards.dec
> new file mode 100644
> index 000000000000..f7e2b01459d7
> --- /dev/null
> +++ b/Platform/NinetySixBoards/NinetySixBoards.dec
> @@ -0,0 +1,67 @@
> +## @file
> +#
> +# Copyright (c) 2018, Linaro Ltd. All rights reserved.
> +#
> +# This program and the accompanying materials
> +# are licensed and made available under the terms and conditions of the BSD License
> +# which accompanies this distribution. The full text of the license may be found at
> +# http://opensource.org/licenses/bsd-license.php
> +#
> +# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> +# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
> +#
> +##
> +
> +[Defines]
> + DEC_SPECIFICATION = 0x0001001A
> + PACKAGE_NAME = NinetySixBoards
> + PACKAGE_GUID = ce4a4683-6e2d-4ec3-bc11-974289a09ab0
> + PACKAGE_VERSION = 0.1
> +
> +[Includes]
> + Include
> +
> +[Protocols]
> + ## Include/Protocol/Mezzanine.h
> + gNinetySixBoardsMezzanineProtocolGuid = { 0xf0467a37, 0x3436, 0x40ef, { 0x94, 0x09, 0x4d, 0x1d, 0x7f, 0x51, 0x06, 0xd3 } }
> +
> +[Guids]
> + # PCD scope GUID
> + gNinetySixBoardsTokenSpaceGuid = { 0xe0d2f33a, 0xb7dd, 0x4a69, { 0xb6, 0x76, 0xda, 0xe8, 0xa4, 0x17, 0xa7, 0xb5 } }
> +
> + # GUIDs to be installed as protocols to identify which controller connects to which bus
> + gNinetySixBoardsI2c0MasterGuid = { 0xba10e402, 0xcfdd, 0x4b87, { 0xbd, 0x02, 0x6e, 0x26, 0x9f, 0x01, 0x94, 0x11 } }
> + gNinetySixBoardsI2c1MasterGuid = { 0xcf64ac46, 0xd0be, 0x4a69, { 0x90, 0xa2, 0xf2, 0x82, 0x5b, 0x92, 0x25, 0x61 } }
> + gNinetySixBoardsSpiMasterGuid = { 0x9703fd99, 0xe638, 0x42b8, { 0xab, 0x81, 0x52, 0x61, 0x1b, 0xf7, 0xf7, 0x5d } }
> +
> +[PcdsFixedAtBuild]
> + # ASCII DT paths to the I2C parent nodes of the 96boards LS connector
> + gNinetySixBoardsTokenSpaceGuid.PcdI2c0Parent|""|VOID*|0x00000001
> + gNinetySixBoardsTokenSpaceGuid.PcdI2c1Parent|""|VOID*|0x00000002
> +
> + # I2C bus frequency in Hertz
> + gNinetySixBoardsTokenSpaceGuid.PcdI2c0BusFrequencyHz|0|UINT32|0x00000003
> + gNinetySixBoardsTokenSpaceGuid.PcdI2c1BusFrequencyHz|0|UINT32|0x00000004
> +
> + # ASCII DT path to the SPI parent node of the 96boards LS connector
> + gNinetySixBoardsTokenSpaceGuid.PcdSpiParent|""|VOID*|0x00000005
> +
> + # ASCII DT path to the GPIO parent node of the 96boards LS connector
> + gNinetySixBoardsTokenSpaceGuid.PcdGpioParent|""|VOID*|0x00000006
> +
> + # Polarity of the 96boards LS connector GPIOs (0 == GPIO_ACTIVE_HIGH, 1 == GPIO_ACTIVE_LOW)
> + gNinetySixBoardsTokenSpaceGuid.PcdGpioPolarity|0|UINT32|0x00000007
> +
> + # Pin numbers of the 96boards LS connector GPIOs
> + gNinetySixBoardsTokenSpaceGuid.PcdGpioPinA|0|UINT32|0x00000010
> + gNinetySixBoardsTokenSpaceGuid.PcdGpioPinB|0|UINT32|0x00000011
> + gNinetySixBoardsTokenSpaceGuid.PcdGpioPinC|0|UINT32|0x00000012
> + gNinetySixBoardsTokenSpaceGuid.PcdGpioPinD|0|UINT32|0x00000013
> + gNinetySixBoardsTokenSpaceGuid.PcdGpioPinE|0|UINT32|0x00000014
> + gNinetySixBoardsTokenSpaceGuid.PcdGpioPinF|0|UINT32|0x00000015
> + gNinetySixBoardsTokenSpaceGuid.PcdGpioPinG|0|UINT32|0x00000016
> + gNinetySixBoardsTokenSpaceGuid.PcdGpioPinH|0|UINT32|0x00000017
> + gNinetySixBoardsTokenSpaceGuid.PcdGpioPinI|0|UINT32|0x00000018
> + gNinetySixBoardsTokenSpaceGuid.PcdGpioPinJ|0|UINT32|0x00000019
> + gNinetySixBoardsTokenSpaceGuid.PcdGpioPinK|0|UINT32|0x0000001A
> + gNinetySixBoardsTokenSpaceGuid.PcdGpioPinL|0|UINT32|0x0000001B
> --
> 2.11.0
>
next prev parent reply other threads:[~2018-02-22 13:09 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-02-20 17:49 [PATCH edk2-platforms v2 0/7] Add Secure96 mezzanine support Ard Biesheuvel
2018-02-20 17:49 ` [PATCH edk2-platforms v2 1/7] Silicon/Atmel: add support for AtSha204a RNG Ard Biesheuvel
2018-02-22 13:08 ` Leif Lindholm
2018-02-23 15:33 ` Ard Biesheuvel
2018-02-20 17:49 ` [PATCH edk2-platforms v2 2/7] Platform/NinetySixBoards: introduce package and mezzanine protocol Ard Biesheuvel
2018-02-22 13:15 ` Leif Lindholm [this message]
2018-02-22 13:21 ` Ard Biesheuvel
2018-02-22 13:44 ` Leif Lindholm
2018-02-22 15:13 ` Ard Biesheuvel
2018-02-20 17:49 ` [PATCH edk2-platforms v2 3/7] Platform/NinetySixBoards: introduce I2C driver Ard Biesheuvel
2018-02-20 17:49 ` [PATCH edk2-platforms v2 4/7] Platform/NinetySixBoards: introduce LsConnector protocol Ard Biesheuvel
2018-02-22 15:29 ` Leif Lindholm
2018-02-20 17:49 ` [PATCH edk2-platforms v2 5/7] Platform/NinetySixBoards: add a driver for the Secure96 mezzanine board Ard Biesheuvel
2018-02-22 15:38 ` Leif Lindholm
2018-02-20 17:49 ` [PATCH edk2-platforms v2 6/7] Platform/NinetySixBoards: add core driver for LS connector and config Ard Biesheuvel
2018-02-22 15:59 ` Leif Lindholm
2018-02-22 19:00 ` Ard Biesheuvel
2018-02-22 19:10 ` Ard Biesheuvel
2018-02-22 20:21 ` Leif Lindholm
2018-02-20 17:49 ` [PATCH edk2-platforms v2 7/7] Platform/Socionext/DeveloperBox: add 96boards mezzanine support Ard Biesheuvel
2018-02-22 16:04 ` [PATCH edk2-platforms v2 0/7] Add Secure96 " Leif Lindholm
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180222131553.dixmsbldbufxdgat@bivouac.eciton.net \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox