From: Ard Biesheuvel <ard.biesheuvel@linaro.org>
To: edk2-devel@lists.01.org
Cc: leif.lindholm@linaro.org, Ard Biesheuvel <ard.biesheuvel@linaro.org>
Subject: [RFC PATCH edk2-non-osi] Platform/DeveloperBox: add prebuilt binary containing stage 2 page tables
Date: Fri, 23 Feb 2018 13:28:58 +0000 [thread overview]
Message-ID: <20180223132858.26248-1-ard.biesheuvel@linaro.org> (raw)
Now that the secure firmware image BL31 has been moved back into secure
memory where it belongs, we can no longer keep the stage2 translation
tables in the same image, given that EL2 is non-secure.
So instead, let's put those tables in the NOR flash, at the end of the
ARM-TF region. This is difficult to integrate into the build sequence
of either ARM-TF or UEFI, so let's just generate the binary and put it
at the correct offset using the .fdf description of the platform.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
---
I am not sure where to put this and how to integrate this into the build,
hence the RFC.
Platform/Socionext/DeveloperBox/README | 2 +
Platform/Socionext/DeveloperBox/stage2_tables.S | 95 ++++++++++++++++++++
Platform/Socionext/DeveloperBox/stage2_tables.bin | Bin 0 -> 20480 bytes
3 files changed, 97 insertions(+)
diff --git a/Platform/Socionext/DeveloperBox/README b/Platform/Socionext/DeveloperBox/README
index 8f079011e153..5728bf0ef88a 100644
--- a/Platform/Socionext/DeveloperBox/README
+++ b/Platform/Socionext/DeveloperBox/README
@@ -6,3 +6,5 @@ fip_all_arm_tf.bin - prebuilt ARM Trusted Firmware RELEASE binary
Repo: https://git.linaro.org/leg/noupstream/arm-trusted-firmware.git
Commit: cd3de9253d90f5ab6eed046fb7bb9f4e9f87ae5a
+stage2_tables.bin - prebuilt stage 2 translation tables
+Built from stage2_tables.S in the same directory
diff --git a/Platform/Socionext/DeveloperBox/stage2_tables.S b/Platform/Socionext/DeveloperBox/stage2_tables.S
new file mode 100644
index 000000000000..44da21e7e467
--- /dev/null
+++ b/Platform/Socionext/DeveloperBox/stage2_tables.S
@@ -0,0 +1,95 @@
+/** @file
+ Copyright (c) 2018, Linaro, Ltd. All rights reserved.<BR>
+
+ This program and the accompanying materials are licensed and made available
+ under the terms and conditions of the BSD License which accompanies this
+ distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+**/
+
+/*
+ * This file contains the assembler code to instantiate a set of stage 2
+ * translation tables that make the ECAM space of the Synopsys DesignWare
+ * PCIe root complexes appear sane to the OS.
+ * - ECAM 'shadows' caused by non TLP filtering root ports are eliminated
+ * - MMIO region are mapped with device attributes that supersede write combine
+ attributes that the OS may attempt to use, and which is not supported by
+ the SoC.
+ *
+ * Build using:
+ *
+ * gcc -o stage2_tables.elf stage2_tables.S \
+ * -Wl,-e,0x81f8000 -Wl,--section-start=.rodata=0x81f8000 -nostdlib
+ *
+ * objcopy -O binary -j .rodata stage2_tables.elf stage2_tables.bin
+ */
+
+#define TT_S2_CONT_SHIFT 52
+#define TT_S2_AF (0x1 << 10)
+#define TT_S2_SH_NON_SHAREABLE (0x0 << 8)
+#define TT_S2_AP_RW (0x3 << 6)
+#define TT_S2_MEMATTR_DEVICE_nGRE (0x2 << 2)
+#define TT_S2_MEMATTR_MEMORY_WB (0xf << 2)
+#define TT_S2_TABLE (0x3 << 0)
+#define TT_S2_L3_PAGE (0x1 << 1)
+#define TT_S2_VALID (0x1 << 0)
+
+ .altmacro
+ .macro for, start, count, do, arg2, arg3, arg4
+ .if \count == 1
+ \do \start, \arg2, \arg3, \arg4
+ .elseif \count > 1
+ for \start, %(\count / 2), \do, \arg2, \arg3, \arg4
+ for %(\start + \count / 2), %((\count + 1) / 2), \do, \arg2, \arg3, \arg4
+ .endif
+ .endm
+
+ .macro s2_dev_entry, base, shift=30, offset=0, cont=0
+ .quad ((\base << \shift) + \offset) | TT_S2_AF | TT_S2_AP_RW | \
+ TT_S2_SH_NON_SHAREABLE | TT_S2_MEMATTR_DEVICE_nGRE | \
+ TT_S2_VALID | (\cont << TT_S2_CONT_SHIFT)
+ .endm
+
+ .macro s2_mem_entry, base, shift=30, offset=0, cont=0
+ .quad ((\base << \shift) + \offset) | TT_S2_AF | TT_S2_AP_RW | \
+ TT_S2_SH_NON_SHAREABLE | TT_S2_MEMATTR_MEMORY_WB | \
+ TT_S2_VALID | (\cont << TT_S2_CONT_SHIFT)
+ .endm
+
+ .macro s2_l3_entry, base, offset=0, cont=0
+ .quad ((\base << 12) + \offset) | TT_S2_AF | TT_S2_AP_RW | \
+ TT_S2_SH_NON_SHAREABLE | TT_S2_MEMATTR_MEMORY_WB | \
+ TT_S2_L3_PAGE | TT_S2_VALID | (\cont << TT_S2_CONT_SHIFT)
+ .endm
+
+ .section ".rodata", "a", %progbits
+ /* level 1 */
+ s2_mem_entry 0 /* 0x0000_0000 - 0x3fff_ffff */
+ .quad 1f + TT_S2_TABLE /* 0x4000_0000 - 0x7fff_ffff */
+ for 2, 246, s2_mem_entry /* 0x8000_0000 - 0x3d_ffff_ffff */
+ for 248, 8, s2_dev_entry /* PCIe MMIO64 */
+ for 256, 768, s2_mem_entry /* 0x40_0000_0000 - 0xff_ffff_ffff */
+
+ /* level 2 */
+1: for 0, 256, s2_mem_entry, 21, 0x40000000, 1
+
+ .quad 2f + TT_S2_TABLE /* 0x6000_0000 -> RC #0 bus 0 */
+ for 1, 15, s2_mem_entry, 21, 0x60000000
+ for 0, 48, s2_mem_entry, 21, 0x62000000, 1
+ for 0, 64, s2_dev_entry, 21, 0x68000000, 1 /* PCIe MMIO32 */
+
+ .quad 3f + TT_S2_TABLE /* 0x7000_0000 -> RC #1 bus 0 */
+ for 1, 15, s2_mem_entry, 21, 0x70000000
+ for 0, 48, s2_mem_entry, 21, 0x72000000, 1
+ for 0, 64, s2_dev_entry, 21, 0x78000000, 1 /* PCIe MMIO32 */
+
+ /* level 3 */
+2: for 0, 8, s2_l3_entry, 0x60000000
+ for 0, 8, s2_l3_entry, 0x60010000 /* hide device #1 */
+ for 0, 496, s2_l3_entry, 0x60010000, 1
+3: for 0, 8, s2_l3_entry, 0x70000000
+ for 0, 8, s2_l3_entry, 0x70010000 /* hide device #1 */
+ for 0, 496, s2_l3_entry, 0x70010000, 1
diff --git a/Platform/Socionext/DeveloperBox/stage2_tables.bin b/Platform/Socionext/DeveloperBox/stage2_tables.bin
new file mode 100644
index 000000000000..48369f00c022
Binary files /dev/null and b/Platform/Socionext/DeveloperBox/stage2_tables.bin differ
--
2.11.0
next reply other threads:[~2018-02-23 13:23 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-02-23 13:28 Ard Biesheuvel [this message]
2018-02-27 10:37 ` [RFC PATCH edk2-non-osi] Platform/DeveloperBox: add prebuilt binary containing stage 2 page tables Leif Lindholm
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180223132858.26248-1-ard.biesheuvel@linaro.org \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox