[edk2-platforms PATCH v2 1/2] VExpressPkg: Add dsc and fdf files for generating Standalone MM Image.

[Supreeth Venkatesh <supreeth.venkatesh@arm.com>]

This patch adds description file and firmware device file to generate
secure world Standalone Management Mode (MM) image on AArch64 FVP. The
secure world Standalone Management Mode (MM) image generated on AArch64
FVP feeds into the fiptool as BL32 image.
These files provide reference for Standalone Management Mode (MM) image
generation on AArch64 FVP.

Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Supreeth Venkatesh <supreeth.venkatesh@arm.com>
---
 .../ArmVExpress-StandaloneMm-FVP-AArch64.dsc       | 102 ++++++++++++
 .../ArmVExpress-StandaloneMm-FVP-AArch64.fdf       | 184 +++++++++++++++++++++
 2 files changed, 286 insertions(+)
 create mode 100644 Platform/ARM/VExpressPkg/ArmVExpress-StandaloneMm-FVP-AArch64.dsc
 create mode 100644 Platform/ARM/VExpressPkg/ArmVExpress-StandaloneMm-FVP-AArch64.fdf

diff --git a/Platform/ARM/VExpressPkg/ArmVExpress-StandaloneMm-FVP-AArch64.dsc b/Platform/ARM/VExpressPkg/ArmVExpress-StandaloneMm-FVP-AArch64.dsc
new file mode 100644
index 0000000000..56d94d352e
--- /dev/null
+++ b/Platform/ARM/VExpressPkg/ArmVExpress-StandaloneMm-FVP-AArch64.dsc
@@ -0,0 +1,102 @@
+#
+#  Copyright (c) 2011-2018, ARM Limited. All rights reserved.
+#
+#  This program and the accompanying materials
+#  are licensed and made available under the terms and conditions of the BSD License
+#  which accompanies this distribution.  The full text of the license may be found at
+#  http://opensource.org/licenses/bsd-license.php
+#
+#  THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+#  WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+#
+#
+
+################################################################################
+#
+# Defines Section - statements that will be processed to create a Makefile.
+#
+################################################################################
+[Defines]
+  PLATFORM_NAME                  = ArmVExpress-StandaloneMm-FVP-AArch64
+  PLATFORM_GUID                  = 49269c13-165c-46f0-85a4-16f290610588
+  PLATFORM_VERSION               = 1.0
+  DSC_SPECIFICATION              = 0x00010011
+!ifdef $(EDK2_OUT_DIR)
+  OUTPUT_DIRECTORY               = $(EDK2_OUT_DIR)
+!else
+  OUTPUT_DIRECTORY               = Build/ArmVExpress-StandaloneMm-FVP-AArch64
+!endif
+  SUPPORTED_ARCHITECTURES        = AARCH64
+  BUILD_TARGETS                  = DEBUG|RELEASE
+  SKUID_IDENTIFIER               = DEFAULT
+  FLASH_DEFINITION               = Platform/ARM/VExpressPkg/ArmVExpress-StandaloneMm-FVP-AArch64.fdf
+
+[LibraryClasses.common]
+  #
+  # Basic
+  #
+  BaseLib|MdePkg/Library/BaseLib/BaseLib.inf
+  BaseMemoryLib|MdePkg/Library/BaseMemoryLib/BaseMemoryLib.inf
+  DebugLib|MdePkg/Library/BaseDebugLibSerialPort/BaseDebugLibSerialPort.inf
+  DebugPrintErrorLevelLib|MdePkg/Library/BaseDebugPrintErrorLevelLib/BaseDebugPrintErrorLevelLib.inf
+  FvLib|StandaloneMmPkg/Library/FvLib/FvLib.inf
+  HobLib|StandaloneMmPkg/Library/StandaloneMmCoreHobLib/StandaloneMmCoreHobLib.inf
+  IoLib|MdePkg/Library/BaseIoLibIntrinsic/BaseIoLibIntrinsic.inf
+  MemLib|StandaloneMmPkg/Library/StandaloneMmMemLib/StandaloneMmMemLib.inf
+  MemoryAllocationLib|StandaloneMmPkg/Library/StandaloneMmCoreMemoryAllocationLib/StandaloneMmCoreMemoryAllocationLib.inf
+  PcdLib|MdePkg/Library/BasePcdLibNull/BasePcdLibNull.inf
+  PeCoffLib|MdePkg/Library/BasePeCoffLib/BasePeCoffLib.inf
+  PrintLib|MdePkg/Library/BasePrintLib/BasePrintLib.inf
+  ReportStatusCodeLib|MdePkg/Library/BaseReportStatusCodeLibNull/BaseReportStatusCodeLibNull.inf
+
+  #
+  # Entry point
+  #
+  StandaloneMmDriverEntryPoint|StandaloneMmPkg/Library/StandaloneMmDriverEntryPoint/StandaloneMmDriverEntryPoint.inf
+
+[LibraryClasses.AARCH64]
+  ArmLib|ArmPkg/Library/ArmLib/ArmBaseLib.inf
+  ArmMmuLib|ArmPkg/Library/ArmMmuLib/ArmMmuStandaloneMmCoreLib.inf
+  ArmSvcLib|ArmPkg/Library/ArmSvcLib/ArmSvcLib.inf
+  CacheMaintenanceLib|ArmPkg/Library/ArmCacheMaintenanceLib/ArmCacheMaintenanceLib.inf
+  PeCoffExtraActionLib|ArmPkg/Library/DebugPeCoffExtraActionLib/DebugPeCoffExtraActionLib.inf
+  PL011UartLib|ArmPlatformPkg/Library/PL011UartLib/PL011UartLib.inf
+  # ARM PL011 UART Driver
+  SerialPortLib|ArmPlatformPkg/Library/PL011SerialPortLib/PL011SerialPortLib.inf
+
+  StandaloneMmCoreEntryPoint|StandaloneMmPkg/Library/StandaloneMmCoreEntryPoint/StandaloneMmCoreEntryPoint.inf
+
+[BuildOptions]
+GCC:*_*_*_DLINK_FLAGS = -z common-page-size=0x1000 -march=armv8-a+nofp
+
+
+################################################################################
+#
+# Pcd Section - list of all EDK II PCD Entries defined by this Platform
+#
+################################################################################
+[PcdsFeatureFlag]
+  gStandaloneMmPkgTokenSpaceGuid.PcdStandaloneMmEnable|TRUE
+
+[PcdsFixedAtBuild]
+  gEfiMdePkgTokenSpaceGuid.PcdDebugPrintErrorLevel|0x800000CF
+  gEfiMdePkgTokenSpaceGuid.PcdDebugPropertyMask|0xff
+  gEfiMdePkgTokenSpaceGuid.PcdReportStatusCodePropertyMask|0x0f
+
+  ## PL011 - Serial Terminal
+  gEfiMdeModulePkgTokenSpaceGuid.PcdSerialRegisterBase|0x1c0b0000
+  gEfiMdePkgTokenSpaceGuid.PcdUartDefaultBaudRate|115200
+
+################################################################################
+#
+# Components Section - list of all EDK II Modules needed by this Platform
+#
+################################################################################
+[Components.common]
+  #
+  # MM Core
+  #
+  StandaloneMmPkg/Core/StandaloneMmCore.inf
+
+[Components.AARCH64]
+  StandaloneMmPkg/Drivers/StandaloneMmCpu/AArch64/StandaloneMmCpu.inf
diff --git a/Platform/ARM/VExpressPkg/ArmVExpress-StandaloneMm-FVP-AArch64.fdf b/Platform/ARM/VExpressPkg/ArmVExpress-StandaloneMm-FVP-AArch64.fdf
new file mode 100644
index 0000000000..11de0e7a8a
--- /dev/null
+++ b/Platform/ARM/VExpressPkg/ArmVExpress-StandaloneMm-FVP-AArch64.fdf
@@ -0,0 +1,184 @@
+#
+#  Copyright (c) 2011 - 2018, ARM Limited. All rights reserved.
+#
+#  This program and the accompanying materials
+#  are licensed and made available under the terms and conditions of the BSD License
+#  which accompanies this distribution.  The full text of the license may be found at
+#  http://opensource.org/licenses/bsd-license.php
+#
+#  THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+#  WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+#
+
+################################################################################
+#
+# FD Section
+# The [FD] Section is made up of the definition statements and a
+# description of what goes into  the Flash Device Image.  Each FD section
+# defines one flash "device" image.  A flash device image may be one of
+# the following: Removable media bootable image (like a boot floppy
+# image,) an Option ROM image (that would be "flashed" into an add-in
+# card,) a System "Flash"  image (that would be burned into a system's
+# flash) or an Update ("Capsule") image that will be used to update and
+# existing system flash.
+#
+################################################################################
+
+[FD.]
+!ifdef ARM_FVP_RUN_NORFLASH
+BaseAddress   = 0x08000000|gArmTokenSpaceGuid.PcdFdBaseAddress  # The base address of the Firmware in Flash0.
+!else
+BaseAddress   = 0xff200000|gArmTokenSpaceGuid.PcdFdBaseAddress  # UEFI in DRAM + 128MB.
+!endif
+Size          = 0x00e00000|gArmTokenSpaceGuid.PcdFdSize         # The size in bytes of the device (64MiB).
+ErasePolarity = 1
+
+# This one is tricky, it must be: BlockSize * NumBlocks = Size
+BlockSize     = 0x00001000
+NumBlocks     = 0x0e00
+
+0x00000000|0x00280000
+gArmTokenSpaceGuid.PcdFvBaseAddress|gArmTokenSpaceGuid.PcdFvSize
+FV = FVMAIN_COMPACT
+
+[FV.FVMAIN_COMPACT]
+FvAlignment        = 16
+ERASE_POLARITY     = 1
+MEMORY_MAPPED      = TRUE
+STICKY_WRITE       = TRUE
+LOCK_CAP           = TRUE
+LOCK_STATUS        = TRUE
+WRITE_DISABLED_CAP = TRUE
+WRITE_ENABLED_CAP  = TRUE
+WRITE_STATUS       = TRUE
+WRITE_LOCK_CAP     = TRUE
+WRITE_LOCK_STATUS  = TRUE
+READ_DISABLED_CAP  = TRUE
+READ_ENABLED_CAP   = TRUE
+READ_STATUS        = TRUE
+READ_LOCK_CAP      = TRUE
+READ_LOCK_STATUS   = TRUE
+
+INF StandaloneMmPkg/Core/StandaloneMmCore.inf
+INF StandaloneMmPkg/Drivers/StandaloneMmCpu/AArch64/StandaloneMmCpu.inf
+
+################################################################################
+#
+# Rules are use with the [FV] section's module INF type to define
+# how an FFS file is created for a given INF file. The following Rule are the default
+# rules for the different module type. User can add the customized rules to define the
+# content of the FFS file.
+#
+################################################################################
+
+
+############################################################################
+# Example of a DXE_DRIVER FFS file with a Checksum encapsulation section   #
+############################################################################
+#
+#[Rule.Common.DXE_DRIVER]
+#  FILE DRIVER = $(NAMED_GUID) {
+#    DXE_DEPEX    DXE_DEPEX               Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
+#    COMPRESS PI_STD {
+#      GUIDED {
+#        PE32     PE32                    $(INF_OUTPUT)/$(MODULE_NAME).efi
+#        UI       STRING="$(MODULE_NAME)" Optional
+#        VERSION  STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
+#      }
+#    }
+#  }
+#
+############################################################################
+
+[Rule.Common.SEC]
+  FILE SEC = $(NAMED_GUID) RELOCS_STRIPPED FIXED {
+    TE  TE Align = Auto                 $(INF_OUTPUT)/$(MODULE_NAME).efi
+  }
+
+[Rule.Common.MM_CORE_STANDALONE]
+  FILE SEC = $(NAMED_GUID) RELOCS_STRIPPED FIXED {
+    PE32  PE32 Align = Auto             $(INF_OUTPUT)/$(MODULE_NAME).efi
+  }
+
+[Rule.Common.MM_STANDALONE]
+  FILE MM_STANDALONE = $(NAMED_GUID) {
+    SMM_DEPEX SMM_DEPEX Optional       $(INF_OUTPUT)/$(MODULE_NAME).depex
+    PE32      PE32                     $(INF_OUTPUT)/$(MODULE_NAME).efi
+    UI        STRING="$(MODULE_NAME)" Optional
+    VERSION   STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
+  }
+
+[Rule.Common.PEI_CORE]
+  FILE PEI_CORE = $(NAMED_GUID) FIXED {
+    TE     TE Align = Auto              $(INF_OUTPUT)/$(MODULE_NAME).efi
+    UI     STRING ="$(MODULE_NAME)" Optional
+  }
+
+[Rule.Common.PEIM]
+  FILE PEIM = $(NAMED_GUID) FIXED {
+     PEI_DEPEX PEI_DEPEX Optional       $(INF_OUTPUT)/$(MODULE_NAME).depex
+     TE       TE Align = Auto           $(INF_OUTPUT)/$(MODULE_NAME).efi
+     UI       STRING="$(MODULE_NAME)" Optional
+  }
+
+[Rule.Common.PEIM.TIANOCOMPRESSED]
+  FILE PEIM = $(NAMED_GUID) DEBUG_MYTOOLS_IA32 {
+    PEI_DEPEX PEI_DEPEX Optional        $(INF_OUTPUT)/$(MODULE_NAME).depex
+    GUIDED A31280AD-481E-41B6-95E8-127F4C984779 PROCESSING_REQUIRED = TRUE {
+      PE32      PE32                    $(INF_OUTPUT)/$(MODULE_NAME).efi
+      UI        STRING="$(MODULE_NAME)" Optional
+    }
+  }
+
+[Rule.Common.DXE_CORE]
+  FILE DXE_CORE = $(NAMED_GUID) {
+    PE32     PE32                       $(INF_OUTPUT)/$(MODULE_NAME).efi
+    UI       STRING="$(MODULE_NAME)" Optional
+  }
+
+[Rule.Common.UEFI_DRIVER]
+  FILE DRIVER = $(NAMED_GUID) {
+    DXE_DEPEX    DXE_DEPEX              Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
+    PE32         PE32                   $(INF_OUTPUT)/$(MODULE_NAME).efi
+    UI           STRING="$(MODULE_NAME)" Optional
+  }
+
+[Rule.Common.DXE_DRIVER]
+  FILE DRIVER = $(NAMED_GUID) {
+    DXE_DEPEX    DXE_DEPEX              Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
+    PE32         PE32                   $(INF_OUTPUT)/$(MODULE_NAME).efi
+    UI           STRING="$(MODULE_NAME)" Optional
+  }
+
+[Rule.Common.DXE_RUNTIME_DRIVER]
+  FILE DRIVER = $(NAMED_GUID) {
+    DXE_DEPEX    DXE_DEPEX              Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
+    PE32         PE32                   $(INF_OUTPUT)/$(MODULE_NAME).efi
+    UI           STRING="$(MODULE_NAME)" Optional
+  }
+
+[Rule.Common.UEFI_APPLICATION]
+  FILE APPLICATION = $(NAMED_GUID) {
+    UI     STRING ="$(MODULE_NAME)"     Optional
+    PE32   PE32                         $(INF_OUTPUT)/$(MODULE_NAME).efi
+  }
+
+[Rule.Common.UEFI_DRIVER.BINARY]
+  FILE DRIVER = $(NAMED_GUID) {
+    DXE_DEPEX DXE_DEPEX Optional      |.depex
+    PE32      PE32                    |.efi
+    UI        STRING="$(MODULE_NAME)" Optional
+    VERSION   STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
+  }
+
+[Rule.Common.UEFI_APPLICATION.BINARY]
+  FILE APPLICATION = $(NAMED_GUID) {
+    PE32      PE32                    |.efi
+    UI        STRING="$(MODULE_NAME)" Optional
+    VERSION   STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
+  }
+
+[Rule.Common.USER_DEFINED.ACPITABLE]
+  FILE FREEFORM = $(NAMED_GUID) {
+    RAW ASL                |.aml
+  }
-- 
2.16.2