From: marcandre.lureau@redhat.com
To: edk2-devel@lists.01.org
Cc: pjones@redhat.com, jiewen.yao@intel.com,
stefanb@linux.vnet.ibm.com, lersek@redhat.com,
qemu-devel@nongnu.org, javierm@redhat.com,
"Marc-André Lureau" <marcandre.lureau@redhat.com>
Subject: [PATCH 2/4] ovmf: add QemuTpm.h header
Date: Tue, 15 May 2018 14:30:05 +0200 [thread overview]
Message-ID: <20180515123007.10164-3-marcandre.lureau@redhat.com> (raw)
In-Reply-To: <20180515123007.10164-1-marcandre.lureau@redhat.com>
From: Marc-André Lureau <marcandre.lureau@redhat.com>
Add some common macros and type definitions corresponding to the QEMU
TPM interface.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
---
OvmfPkg/Include/IndustryStandard/QemuTpm.h | 67 ++++++++++++++++++++++
1 file changed, 67 insertions(+)
create mode 100644 OvmfPkg/Include/IndustryStandard/QemuTpm.h
diff --git a/OvmfPkg/Include/IndustryStandard/QemuTpm.h b/OvmfPkg/Include/IndustryStandard/QemuTpm.h
new file mode 100644
index 000000000000..054cf79374b5
--- /dev/null
+++ b/OvmfPkg/Include/IndustryStandard/QemuTpm.h
@@ -0,0 +1,67 @@
+/** @file
+ Macro and type definitions corresponding to the QEMU TPM interface.
+
+ Refer to "docs/specs/tpm.txt" in the QEMU source directory.
+
+ Copyright (C) 2018, Red Hat, Inc.
+ Copyright (c) 2018, IBM Corporation. All rights reserved.<BR>
+
+ This program and the accompanying materials are licensed and made available
+ under the terms and conditions of the BSD License which accompanies this
+ distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, WITHOUT
+ WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+**/
+
+#ifndef __QEMU_TPM_H__
+#define __QEMU_TPM_H__
+
+#include <Base.h>
+
+/* whether function is blocked by BIOS settings; bits 0, 1, 2 */
+#define QEMU_TPM_PPI_FUNC_NOT_IMPLEMENTED (0 << 0)
+#define QEMU_TPM_PPI_FUNC_BIOS_ONLY (1 << 0)
+#define QEMU_TPM_PPI_FUNC_BLOCKED (2 << 0)
+#define QEMU_TPM_PPI_FUNC_ALLOWED_USR_REQ (3 << 0)
+#define QEMU_TPM_PPI_FUNC_ALLOWED_USR_NOT_REQ (4 << 0)
+#define QEMU_TPM_PPI_FUNC_MASK (7 << 0)
+
+//
+// The following structure is shared between firmware and ACPI.
+//
+#pragma pack (1)
+typedef struct {
+ UINT8 Func[256]; /* func */
+ UINT8 In; /* ppin */
+ UINT32 Ip; /* ppip */
+ UINT32 Response; /* pprp */
+ UINT32 Request; /* pprq */
+ UINT32 RequestParameter; /* pprm */
+ UINT32 LastRequest; /* lppr */
+ UINT32 FRet; /* fret */
+ UINT8 Res1[0x40]; /* res1 */
+ UINT8 NextStep; /* next_step */
+} QEMU_TPM_PPI;
+#pragma pack ()
+
+//
+// The following structure is for the fw_cfg etc/tpm/config file.
+//
+#pragma pack (1)
+typedef struct {
+ UINT32 PpiAddress;
+ UINT8 TpmVersion;
+ UINT8 PpiVersion;
+} QEMU_FWCFG_TPM_CONFIG;
+#pragma pack ()
+
+#define QEMU_TPM_VERSION_UNSPEC 0
+#define QEMU_TPM_VERSION_1_2 1
+#define QEMU_TPM_VERSION_2 2
+
+#define QEMU_TPM_PPI_VERSION_NONE 0
+#define QEMU_TPM_PPI_VERSION_1_30 1
+
+#endif
--
2.17.0.253.g3dd125b46d
next prev parent reply other threads:[~2018-05-15 12:30 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-05-15 12:30 [PATCH 0/4] RFC: ovmf: Add support for TPM Physical Presence interface marcandre.lureau
2018-05-15 12:30 ` [PATCH 1/4] ovmf: add and link with Tcg2PhysicalPresenceLibNull when !TPM2_ENABLE marcandre.lureau
2018-05-17 7:58 ` Laszlo Ersek
2018-05-15 12:30 ` marcandre.lureau [this message]
2018-05-17 8:10 ` [PATCH 2/4] ovmf: add QemuTpm.h header Laszlo Ersek
2018-05-15 12:30 ` [PATCH 3/4] ovmf: replace SecurityPkg with OvfmPkg Tcg2PhysicalPresenceLibQemu marcandre.lureau
2018-05-17 10:14 ` Laszlo Ersek
2018-05-15 12:30 ` [PATCH 4/4] ovmf: process TPM PPI request in AfterConsole() marcandre.lureau
2018-05-17 10:24 ` Laszlo Ersek
2018-05-16 9:29 ` [PATCH 0/4] RFC: ovmf: Add support for TPM Physical Presence interface Laszlo Ersek
2018-05-17 7:41 ` Laszlo Ersek
2018-05-17 14:43 ` Marc-André Lureau
2018-05-17 14:58 ` Laszlo Ersek
2018-05-17 7:54 ` Laszlo Ersek
2018-05-17 8:26 ` Laszlo Ersek
2018-05-17 14:44 ` Marc-André Lureau
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180515123007.10164-3-marcandre.lureau@redhat.com \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox