From: Leif Lindholm <leif.lindholm@linaro.org>
To: Haojian Zhuang <haojian.zhuang@linaro.org>
Cc: edk2-devel@lists.01.org, Ard Biesheuvel <ard.biesheuvel@linaro.org>
Subject: Re: [PATCH edk2-platforms v4 1/6] Platform/Hisilicon/HiKey960: add gpio platform driver
Date: Mon, 21 May 2018 10:26:05 +0100 [thread overview]
Message-ID: <20180521092605.jsgorbgkrlzb2nmm@bivouac.eciton.net> (raw)
In-Reply-To: <1526272473-25565-2-git-send-email-haojian.zhuang@linaro.org>
On Mon, May 14, 2018 at 12:34:28PM +0800, Haojian Zhuang wrote:
> Add gpio platform driver to enable GPIO in HiKey960 platform.
>
> Cc: Leif Lindholm <leif.lindholm@linaro.org>
> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
> Contributed-under: TianoCore Contribution Agreement 1.1
> Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
> ---
> Platform/Hisilicon/HiKey960/HiKey960.dsc | 1 +
> Platform/Hisilicon/HiKey960/HiKey960.fdf | 1 +
> .../HiKey960/HiKey960GpioDxe/HiKey960GpioDxe.c | 83 ++++++++++++++++++++++
> .../HiKey960/HiKey960GpioDxe/HiKey960GpioDxe.inf | 35 +++++++++
> 4 files changed, 120 insertions(+)
> create mode 100644 Platform/Hisilicon/HiKey960/HiKey960GpioDxe/HiKey960GpioDxe.c
> create mode 100644 Platform/Hisilicon/HiKey960/HiKey960GpioDxe/HiKey960GpioDxe.inf
>
> diff --git a/Platform/Hisilicon/HiKey960/HiKey960.dsc b/Platform/Hisilicon/HiKey960/HiKey960.dsc
> index 36f43956ab40..3da1b8556321 100644
> --- a/Platform/Hisilicon/HiKey960/HiKey960.dsc
> +++ b/Platform/Hisilicon/HiKey960/HiKey960.dsc
> @@ -179,6 +179,7 @@ [Components.common]
> #
> # GPIO
> #
> + Platform/Hisilicon/HiKey960/HiKey960GpioDxe/HiKey960GpioDxe.inf
> ArmPlatformPkg/Drivers/PL061GpioDxe/PL061GpioDxe.inf
>
> #
> diff --git a/Platform/Hisilicon/HiKey960/HiKey960.fdf b/Platform/Hisilicon/HiKey960/HiKey960.fdf
> index 655032a36c53..162dbaaf2646 100644
> --- a/Platform/Hisilicon/HiKey960/HiKey960.fdf
> +++ b/Platform/Hisilicon/HiKey960/HiKey960.fdf
> @@ -120,6 +120,7 @@ [FV.FvMain]
> #
> # GPIO
> #
> + INF Platform/Hisilicon/HiKey960/HiKey960GpioDxe/HiKey960GpioDxe.inf
> INF ArmPlatformPkg/Drivers/PL061GpioDxe/PL061GpioDxe.inf
>
> #
> diff --git a/Platform/Hisilicon/HiKey960/HiKey960GpioDxe/HiKey960GpioDxe.c b/Platform/Hisilicon/HiKey960/HiKey960GpioDxe/HiKey960GpioDxe.c
> new file mode 100644
> index 000000000000..b196455072cc
> --- /dev/null
> +++ b/Platform/Hisilicon/HiKey960/HiKey960GpioDxe/HiKey960GpioDxe.c
> @@ -0,0 +1,83 @@
> +/** @file
> +*
> +* Copyright (c) 2018, Linaro. All rights reserved.
> +*
> +* This program and the accompanying materials
> +* are licensed and made available under the terms and conditions of the BSD License
> +* which accompanies this distribution. The full text of the license may be found at
> +* http://opensource.org/licenses/bsd-license.php
> +*
> +* THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> +* WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
> +*
> +**/
> +
> +#include <Library/UefiBootServicesTableLib.h>
> +
> +#include <Protocol/EmbeddedGpio.h>
> +
> +GPIO_CONTROLLER gGpioDevice[] = {
> + //
> + // { base address, gpio index, gpio count }
> + //
> + { 0xe8a0b000, 0, 8 }, // GPIO0
> + { 0xe8a0c000, 8, 8 }, // GPIO1
> + { 0xe8a0d000, 16, 8 }, // GPIO2
> + { 0xe8a0e000, 24, 8 }, // GPIO3
> + { 0xe8a0f000, 32, 8 }, // GPIO4
> + { 0xe8a10000, 40, 8 }, // GPIO5
> + { 0xe8a11000, 48, 8 }, // GPIO6
> + { 0xe8a12000, 56, 8 }, // GPIO7
> + { 0xe8a13000, 64, 8 }, // GPIO8
> + { 0xe8a14000, 72, 8 }, // GPIO9
> + { 0xe8a15000, 80, 8 }, // GPIO10
> + { 0xe8a16000, 88, 8 }, // GPIO11
> + { 0xe8a17000, 96, 8 }, // GPIO12
> + { 0xe8a18000, 104, 8 }, // GPIO13
> + { 0xe8a19000, 112, 8 }, // GPIO14
> + { 0xe8a1a000, 120, 8 }, // GPIO15
> + { 0xe8a1b000, 128, 8 }, // GPIO16
> + { 0xe8a1c000, 136, 8 }, // GPIO17
> + { 0xff3b4000, 144, 8 }, // GPIO18
> + { 0xff3b5000, 152, 8 }, // GPIO19
> + { 0xe8a1f000, 160, 8 }, // GPIO20
> + { 0xe8a20000, 168, 8 }, // GPIO21
> + { 0xfff0b000, 176, 8 }, // GPIO22
> + { 0xfff0c000, 184, 8 }, // GPIO23
> + { 0xfff0d000, 192, 8 }, // GPIO24
> + { 0xfff0e000, 200, 8 }, // GPIO25
> + { 0xfff0f000, 208, 8 }, // GPIO26
> + { 0xfff10000, 216, 8 }, // GPIO27
> + { 0xfff1d000, 224, 8 }, // GPIO28
> +};
> +
> +PLATFORM_GPIO_CONTROLLER gPlatformGpioDevice = {
> + //
> + // { global gpio count, gpio controller count, GPIO_CONTROLLER }
> + //
> + 232, 29, gGpioDevice
> +};
> +
> +EFI_STATUS
> +EFIAPI
> +HiKey960GpioEntryPoint (
> + IN EFI_HANDLE ImageHandle,
> + IN EFI_SYSTEM_TABLE *SystemTable
> + )
> +{
> + EFI_STATUS Status;
> + EFI_HANDLE Handle;
> +
> + // Install the Embedded Platform GPIO Protocol onto a new handle
> + Handle = NULL;
> + Status = gBS->InstallMultipleProtocolInterfaces(
> + &Handle,
> + &gPlatformGpioProtocolGuid, &gPlatformGpioDevice,
> + NULL
> + );
> + if (EFI_ERROR(Status)) {
> + Status = EFI_OUT_OF_RESOURCES;
> + }
> +
> + return Status;
> +}
> diff --git a/Platform/Hisilicon/HiKey960/HiKey960GpioDxe/HiKey960GpioDxe.inf b/Platform/Hisilicon/HiKey960/HiKey960GpioDxe/HiKey960GpioDxe.inf
> new file mode 100644
> index 000000000000..5ea3747321d8
> --- /dev/null
> +++ b/Platform/Hisilicon/HiKey960/HiKey960GpioDxe/HiKey960GpioDxe.inf
> @@ -0,0 +1,35 @@
> +#
> +# Copyright (c) 2018, Linaro. All rights reserved.
> +#
> +# This program and the accompanying materials
> +# are licensed and made available under the terms and conditions of the BSD License
> +# which accompanies this distribution. The full text of the license may be found at
> +# http://opensource.org/licenses/bsd-license.php
> +#
> +# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> +# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
> +#
> +
> +[Defines]
> + INF_VERSION = 0x0001001a
> + BASE_NAME = HiKey960GpioDxe
> + FILE_GUID = 6aa12592-7e36-4aec-acf8-2ac2fd13815c
> + MODULE_TYPE = DXE_DRIVER
> + VERSION_STRING = 1.0
> + ENTRY_POINT = HiKey960GpioEntryPoint
> +
> +[Sources]
> + HiKey960GpioDxe.c
> +
> +[Packages]
> + EmbeddedPkg/EmbeddedPkg.dec
> + MdePkg/MdePkg.dec
> +
> +[LibraryClasses]
> + UefiDriverEntryPoint
> +
> +[Protocols]
> + gPlatformGpioProtocolGuid
> +
> +[Depex]
> + TRUE
> --
> 2.7.4
>
next prev parent reply other threads:[~2018-05-21 9:26 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-05-14 4:34 [PATCH v4 0/6] enable virtual keyboard Haojian Zhuang
2018-05-14 4:34 ` [PATCH edk2-platforms v4 1/6] Platform/Hisilicon/HiKey960: add gpio platform driver Haojian Zhuang
2018-05-21 9:26 ` Leif Lindholm [this message]
2018-05-14 4:34 ` [PATCH edk2-platforms v4 2/6] Platform/HiKey960: do basic initialization Haojian Zhuang
2018-05-21 9:41 ` Leif Lindholm
2018-05-23 7:14 ` Haojian Zhuang
2018-05-14 4:34 ` [PATCH edk2-platforms v4 3/6] Platform/HiKey960: enable virtual keyboard Haojian Zhuang
2018-05-21 9:48 ` Leif Lindholm
2018-05-14 4:34 ` [PATCH edk2-platforms v4 4/6] Platform/Hisilicon/HiKey: add gpio platform driver Haojian Zhuang
2018-05-21 9:48 ` Leif Lindholm
2018-05-14 4:34 ` [PATCH edk2-platforms v4 5/6] Platform/HiKey: do basic initialization on hikey Haojian Zhuang
2018-05-21 9:54 ` Leif Lindholm
2018-05-14 4:34 ` [PATCH edk2-platforms v4 6/6] Platform/HiKey: enable virtual keyboard Haojian Zhuang
2018-05-21 9:55 ` Leif Lindholm
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180521092605.jsgorbgkrlzb2nmm@bivouac.eciton.net \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox