public inbox for devel@edk2.groups.io
 help / color / mirror / Atom feed
From: Leif Lindholm <leif.lindholm@linaro.org>
To: Marcin Wojtas <mw@semihalf.com>
Cc: edk2-devel@lists.01.org, ard.biesheuvel@linaro.org,
	jsd@semihalf.com, jinghua@marvell.com, jaz@semihalf.com,
	davidsn@marvell.com
Subject: Re: [platforms PATCH v2 5/5] Marvell/Armada7k8k: Wire up capsule support
Date: Mon, 4 Jun 2018 11:08:17 +0100	[thread overview]
Message-ID: <20180604100817.2of3p2bbxairankc@bivouac.eciton.net> (raw)
In-Reply-To: <1528090175-15791-6-git-send-email-mw@semihalf.com>

On Mon, Jun 04, 2018 at 07:29:35AM +0200, Marcin Wojtas wrote:
> All required components are in place, so we can now
> add all necessary dependencies to build and use capsule support
> for Armada7k8k platforms. It is conditionally enabled
> with '-D CAPSULE_ENABLE' flag added during build time.
> 
> Because the capsule generation must be sequential,
> due to boot requirements and glueing all binaries
> (BLE, ARM-TF, BL33) externally, introduce additional
> .dsc and .fdf file solely for creating the capsule.
> Prior to this step 'flash-image.bin' binary must be placed
> under Platform/Marvell path.
> 
> Contributed-under: TianoCore Contribution Agreement 1.1
> Signed-off-by: Marcin Wojtas <mw@semihalf.com>
> Signed-off-by: David Sniatkiwicz <davidsn@marvell.com>
> ---
>  Platform/Marvell/Armada70x0Db/Armada70x0Db.fdf        | 66 ++++++++++++++++++
>  Platform/Marvell/Armada70x0Db/Armada70x0DbCapsule.dsc | 46 +++++++++++++
>  Platform/Marvell/Armada70x0Db/Armada70x0DbCapsule.fdf | 70 ++++++++++++++++++++
>  Silicon/Marvell/Armada7k8k/Armada7k8k.dsc.inc         | 41 ++++++++++++
>  4 files changed, 223 insertions(+)
> 
> diff --git a/Platform/Marvell/Armada70x0Db/Armada70x0Db.fdf b/Platform/Marvell/Armada70x0Db/Armada70x0Db.fdf
> index bf04f4d..e5e5443 100644
> --- a/Platform/Marvell/Armada70x0Db/Armada70x0Db.fdf
> +++ b/Platform/Marvell/Armada70x0Db/Armada70x0Db.fdf
> @@ -201,6 +201,15 @@ FvNameGuid         = 5eda4200-2c5f-43cb-9da3-0baf74b1b30c
>    INF MdeModulePkg/Universal/BdsDxe/BdsDxe.inf
>    INF MdeModulePkg/Application/UiApp/UiApp.inf
>  
> +!if $(CAPSULE_ENABLE)
> +  # Firmware update
> +  INF MdeModulePkg/Universal/EsrtDxe/EsrtDxe.inf
> +  INF SignedCapsulePkg/Universal/SystemFirmwareUpdate/SystemFirmwareReportDxe.inf
> +  FILE FREEFORM = PCD(gEfiSignedCapsulePkgTokenSpaceGuid.PcdEdkiiPkcs7TestPublicKeyFileGuid) {
> +     SECTION RAW = BaseTools/Source/Python/Pkcs7Sign/TestRoot.cer
> +     SECTION UI = "Pkcs7TestRoot"
> +  }
> +!endif
>  
>  # PEI phase firmware volume
>  [FV.FVMAIN_COMPACT]
> @@ -228,6 +237,11 @@ READ_LOCK_STATUS   = TRUE
>    INF ArmPlatformPkg/MemoryInitPei/MemoryInitPeim.inf
>    INF ArmPkg/Drivers/CpuPei/CpuPei.inf
>    INF MdeModulePkg/Universal/Variable/Pei/VariablePei.inf
> +!if $(CAPSULE_ENABLE)
> +  INF MdeModulePkg/Universal/FaultTolerantWritePei/FaultTolerantWritePei.inf
> +  INF MdeModulePkg/Universal/CapsulePei/CapsulePei.inf
> +  INF RuleOverride = FMP_IMAGE_DESC Silicon/Marvell/Armada7k8k/Feature/Capsule/SystemFirmwareDescriptor/SystemFirmwareDescriptor.inf
> +!endif
>    INF MdeModulePkg/Core/DxeIplPeim/DxeIpl.inf
>  
>    FILE FV_IMAGE = 9E21FD93-9C72-4c15-8C4B-E77F1DB2D792 {
> @@ -236,6 +250,49 @@ READ_LOCK_STATUS   = TRUE
>      }
>    }
>  
> +!if $(CAPSULE_ENABLE)
> +[FV.SystemFirmwareDescriptor]
> +FvAlignment        = 8
> +ERASE_POLARITY     = 1
> +MEMORY_MAPPED      = TRUE
> +STICKY_WRITE       = TRUE
> +LOCK_CAP           = TRUE
> +LOCK_STATUS        = TRUE
> +WRITE_DISABLED_CAP = TRUE
> +WRITE_ENABLED_CAP  = TRUE
> +WRITE_STATUS       = TRUE
> +WRITE_LOCK_CAP     = TRUE
> +WRITE_LOCK_STATUS  = TRUE
> +READ_DISABLED_CAP  = TRUE
> +READ_ENABLED_CAP   = TRUE
> +READ_STATUS        = TRUE
> +READ_LOCK_CAP      = TRUE
> +READ_LOCK_STATUS   = TRUE
> +
> +  INF RuleOverride = FMP_IMAGE_DESC Silicon/Marvell/Armada7k8k/Feature/Capsule/SystemFirmwareDescriptor/SystemFirmwareDescriptor.inf
> +
> +[FV.CapsuleDispatchFv]
> +FvAlignment        = 8
> +ERASE_POLARITY     = 1
> +MEMORY_MAPPED      = TRUE
> +STICKY_WRITE       = TRUE
> +LOCK_CAP           = TRUE
> +LOCK_STATUS        = TRUE
> +WRITE_DISABLED_CAP = TRUE
> +WRITE_ENABLED_CAP  = TRUE
> +WRITE_STATUS       = TRUE
> +WRITE_LOCK_CAP     = TRUE
> +WRITE_LOCK_STATUS  = TRUE
> +READ_DISABLED_CAP  = TRUE
> +READ_ENABLED_CAP   = TRUE
> +READ_STATUS        = TRUE
> +READ_LOCK_CAP      = TRUE
> +READ_LOCK_STATUS   = TRUE
> +
> +  INF  SignedCapsulePkg/Universal/SystemFirmwareUpdate/SystemFirmwareUpdateDxe.inf
> +
> +!endif
> +
>  ################################################################################
>  #
>  # Rules are use with the [FV] section's module INF type to define
> @@ -331,3 +388,12 @@ READ_LOCK_STATUS   = TRUE
>      UI     STRING ="$(MODULE_NAME)" Optional
>      PE32   PE32                         $(INF_OUTPUT)/$(MODULE_NAME).efi
>    }
> +
> +[Rule.Common.PEIM.FMP_IMAGE_DESC]
> +  FILE PEIM = $(NAMED_GUID) {
> +     RAW BIN                  |.acpi
> +     PEI_DEPEX PEI_DEPEX Optional        $(INF_OUTPUT)/$(MODULE_NAME).depex
> +     PE32      PE32    Align=4K          $(INF_OUTPUT)/$(MODULE_NAME).efi
> +     UI       STRING="$(MODULE_NAME)" Optional
> +     VERSION  STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
> +  }
> diff --git a/Platform/Marvell/Armada70x0Db/Armada70x0DbCapsule.dsc b/Platform/Marvell/Armada70x0Db/Armada70x0DbCapsule.dsc
> new file mode 100644
> index 0000000..a7d1382
> --- /dev/null
> +++ b/Platform/Marvell/Armada70x0Db/Armada70x0DbCapsule.dsc
> @@ -0,0 +1,46 @@
> +#Copyright (C) 2018 Marvell International Ltd.
> +#
> +#Marvell BSD License Option
> +#
> +#If you received this File from Marvell, you may opt to use, redistribute and/or
> +#modify this File under the following licensing terms.
> +#Redistribution and use in source and binary forms, with or without modification,
> +#are permitted provided that the following conditions are met:
> +#
> +# * Redistributions of source code must retain the above copyright notice,
> +# this list of conditions and the following disclaimer.
> +#
> +# * Redistributions in binary form must reproduce the above copyright
> +# notice, this list of conditions and the following disclaimer in the
> +# documentation and/or other materials provided with the distribution.
> +#
> +# * Neither the name of Marvell nor the names of its contributors may be
> +# used to endorse or promote products derived from this software without
> +# specific prior written permission.
> +#
> +#THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
> +#ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
> +#WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
> +#DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
> +#ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
> +#(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
> +#LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
> +#ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
> +#(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
> +#SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
> +#
> +################################################################################
> +#
> +# Defines Section - statements that will be processed to create a Makefile.
> +#
> +################################################################################
> +[Defines]
> +  PLATFORM_NAME                  = Armada70x0Db
> +  PLATFORM_GUID                  = 982e2ab1-26ca-4617-92e6-061bd6ba9ae3
> +  PLATFORM_VERSION               = 0.1
> +  DSC_SPECIFICATION              = 0x00010019
> +  OUTPUT_DIRECTORY               = Build/$(PLATFORM_NAME)-$(ARCH)
> +  SUPPORTED_ARCHITECTURES        = AARCH64|ARM
> +  BUILD_TARGETS                  = DEBUG|RELEASE
> +  SKUID_IDENTIFIER               = DEFAULT
> +  FLASH_DEFINITION               = Platform/Marvell/Armada70x0Db/Armada70x0DbCapsule.fdf
> diff --git a/Platform/Marvell/Armada70x0Db/Armada70x0DbCapsule.fdf b/Platform/Marvell/Armada70x0Db/Armada70x0DbCapsule.fdf
> new file mode 100644
> index 0000000..e5a9c68
> --- /dev/null
> +++ b/Platform/Marvell/Armada70x0Db/Armada70x0DbCapsule.fdf
> @@ -0,0 +1,70 @@
> +#
> +#  Copyright (C) Marvell International Ltd. and its affiliates
> +#
> +#  This program and the accompanying materials
> +#  are licensed and made available under the terms and conditions of the BSD License
> +#  which accompanies this distribution.  The full text of the license may be found at
> +#  http://opensource.org/licenses/bsd-license.php
> +#
> +#  THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> +#  WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
> +#
> +
> +[FD.Armada_Capsule]
> +BaseAddress   = 0x00000000 #|gArmTokenSpaceGuid.PcdFdBaseAddress  # The base address of the Firmware in NOR Flash.
> +Size          = 0x00400000 #|gArmTokenSpaceGuid.PcdFdSize         # The size in bytes of the FLASH Device
> +ErasePolarity = 1
> +
> +0x00000000|0x00010000
> +FILE = $(WORKSPACE)/$(OUTPUT_DIRECTORY)/$(TARGET)_$(TOOL_CHAIN_TAG)/FV/SYSTEMFIRMWAREDESCRIPTOR.Fv
> +
> +0x00100000|0x00300000
> +FILE = Platform/Marvell/flash-image.bin

So, I'm happy with everything in this set other than the line above.
(You can take this as Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
for 1-4/5.)

Mandating magic copying into the source tree of special binaries (that
can then not be used to build separate DEBUG/RELEASE images in one
session without deleting them in the meantime) is out.

When I integrated arm-tf build support into uefi-tools, I did the
following, to allow the build artefacts to all reside within the Build
directory:
https://git.linaro.org/uefi/uefi-tools.git/tree/atf-build.sh#n201

Ard hates this, because it makes assumptions about the internals of
the EDK2 build environment not overriding things in Conf/target.txt
(which is admittedly valid when then turning edk2 back into a consumer
of the output - the above was only ever used for publishing purposes).

His preference is replacing the "Platform/Marvell/" bit with a -D
option to tell the build system in which directory to look for the
file. I could go along with that.

So the question remaining is what do we call the option?
Since this situation is likely to reappear for other platforms, let's
keep it generic. ARM_TRUSTED_FIRMWARE_IMAGE_PREFIX or suchlike.

/
    Leif

> +
> +[FV.SystemFirmwareUpdateCargo]
> +FvAlignment        = 8
> +ERASE_POLARITY     = 1
> +MEMORY_MAPPED      = TRUE
> +STICKY_WRITE       = TRUE
> +LOCK_CAP           = TRUE
> +LOCK_STATUS        = TRUE
> +WRITE_DISABLED_CAP = TRUE
> +WRITE_ENABLED_CAP  = TRUE
> +WRITE_STATUS       = TRUE
> +WRITE_LOCK_CAP     = TRUE
> +WRITE_LOCK_STATUS  = TRUE
> +READ_DISABLED_CAP  = TRUE
> +READ_ENABLED_CAP   = TRUE
> +READ_STATUS        = TRUE
> +READ_LOCK_CAP      = TRUE
> +READ_LOCK_STATUS   = TRUE
> +
> +  FILE RAW = b3890e02-c46b-4970-9536-57787a9e06c7 { # PcdEdkiiSystemFirmwareFileGuid
> +     FD = Armada_Capsule
> +  }
> +
> +  FILE RAW = ce57b167-b0e4-41e8-a897-5f4feb781d40 { # gEdkiiSystemFmpCapsuleDriverFvFileGuid
> +    $(WORKSPACE)/$(OUTPUT_DIRECTORY)/$(TARGET)_$(TOOL_CHAIN_TAG)/FV/CAPSULEDISPATCHFV.Fv
> +  }
> +
> +  FILE RAW = 812136D3-4D3A-433A-9418-29BB9BF78F6E { # gEdkiiSystemFmpCapsuleConfigFileGuid
> +    Silicon/Marvell/Armada7k8k/Feature/Capsule/SystemFirmwareUpdateConfig/SystemFirmwareUpdateConfig.ini
> +  }
> +
> +[FmpPayload.FmpPayloadSystemFirmwarePkcs7]
> +IMAGE_HEADER_INIT_VERSION = 0x02
> +IMAGE_TYPE_ID             = 757fc475-6b22-4482-868e-ded286f30940 # PcdSystemFmpCapsuleImageTypeIdGuid
> +IMAGE_INDEX               = 0x1
> +HARDWARE_INSTANCE         = 0x0
> +MONOTONIC_COUNT           = 0x1
> +CERTIFICATE_GUID          = 4AAFD29D-68DF-49EE-8AA9-347D375665A7 # PKCS7
> +
> +  FV = SystemFirmwareUpdateCargo
> +
> +[Capsule.MvFirmwareUpdateCapsuleFmpPkcs7]
> +CAPSULE_GUID                = 6dcbd5ed-e82d-4c44-bda1-7194199ad92a # gEfiFmpCapsuleGuid
> +CAPSULE_HEADER_SIZE         = 0x20
> +CAPSULE_HEADER_INIT_VERSION = 0x1
> +
> +  FMP_PAYLOAD = FmpPayloadSystemFirmwarePkcs7
> +
> diff --git a/Silicon/Marvell/Armada7k8k/Armada7k8k.dsc.inc b/Silicon/Marvell/Armada7k8k/Armada7k8k.dsc.inc
> index 8fb912b..75fa3d4 100644
> --- a/Silicon/Marvell/Armada7k8k/Armada7k8k.dsc.inc
> +++ b/Silicon/Marvell/Armada7k8k/Armada7k8k.dsc.inc
> @@ -42,8 +42,23 @@
>    DebugLib|MdePkg/Library/BaseDebugLibSerialPort/BaseDebugLibSerialPort.inf
>    DebugPrintErrorLevelLib|MdePkg/Library/BaseDebugPrintErrorLevelLib/BaseDebugPrintErrorLevelLib.inf
>  
> +!if $(CAPSULE_ENABLE)
> +  OpensslLib|CryptoPkg/Library/OpensslLib/OpensslLib.inf
> +  IntrinsicLib|CryptoPkg/Library/IntrinsicLib/IntrinsicLib.inf
> +  BaseCryptLib|CryptoPkg/Library/BaseCryptLib/BaseCryptLib.inf
> +  CapsuleLib|MdeModulePkg/Library/DxeCapsuleLibFmp/DxeCapsuleLib.inf
> +  EdkiiSystemCapsuleLib|SignedCapsulePkg/Library/EdkiiSystemCapsuleLib/EdkiiSystemCapsuleLib.inf
> +  FmpAuthenticationLib|SecurityPkg/Library/FmpAuthenticationLibPkcs7/FmpAuthenticationLibPkcs7.inf
> +  IniParsingLib|SignedCapsulePkg/Library/IniParsingLib/IniParsingLib.inf
> +  PlatformFlashAccessLib|Silicon/Marvell/Armada7k8k/Feature/Capsule/PlatformFlashAccessLib/PlatformFlashAccessLib.inf
> +!endif
> +
>  # Basic utility libraries
>    BaseLib|MdePkg/Library/BaseLib/BaseLib.inf
> +!if $(CAPSULE_ENABLE)
> +  BmpSupportLib|MdeModulePkg/Library/BaseBmpSupportLib/BaseBmpSupportLib.inf
> +  SafeIntLib|MdePkg/Library/BaseSafeIntLib/BaseSafeIntLib.inf
> +!endif
>    SynchronizationLib|MdePkg/Library/BaseSynchronizationLib/BaseSynchronizationLib.inf
>    PerformanceLib|MdePkg/Library/BasePerformanceLibNull/BasePerformanceLibNull.inf
>    PrintLib|MdePkg/Library/BasePrintLib/BasePrintLib.inf
> @@ -199,7 +214,11 @@
>  [LibraryClasses.common.DXE_RUNTIME_DRIVER]
>    HobLib|MdePkg/Library/DxeHobLib/DxeHobLib.inf
>    MemoryAllocationLib|MdePkg/Library/UefiMemoryAllocationLib/UefiMemoryAllocationLib.inf
> +!if $(CAPSULE_ENABLE)
> +  CapsuleLib|MdeModulePkg/Library/DxeCapsuleLibFmp/DxeRuntimeCapsuleLib.inf
> +!else
>    CapsuleLib|MdeModulePkg/Library/DxeCapsuleLibNull/DxeCapsuleLibNull.inf
> +!endif
>  !if $(TARGET) != RELEASE
>    DebugLib|MdePkg/Library/DxeRuntimeDebugLibSerialPort/DxeRuntimeDebugLibSerialPort.inf
>  !endif
> @@ -376,6 +395,13 @@
>    gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareBase|0xF93E0000
>    gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareSize|0x00010000
>  
> +!if $(CAPSULE_ENABLE)
> +[PcdsDynamicExDefault.common.DEFAULT]
> +  gEfiSignedCapsulePkgTokenSpaceGuid.PcdEdkiiSystemFirmwareImageDescriptor|{0x0}|VOID*|0x100
> +  gEfiSignedCapsulePkgTokenSpaceGuid.PcdEdkiiSystemFirmwareFileGuid|{0x02, 0x0e, 0x89, 0xb3, 0x6b, 0xc4, 0x70, 0x49, 0x95, 0x36, 0x57, 0x78, 0x7a, 0x9e, 0x06, 0xc7}
> +  gEfiMdeModulePkgTokenSpaceGuid.PcdSystemFmpCapsuleImageTypeIdGuid|{0x75, 0xc4, 0x7f, 0x75, 0x22, 0x6b, 0x82, 0x44, 0x86, 0x8e, 0xde, 0xd2, 0x86, 0xf3, 0x09, 0x40}
> +!endif
> +
>  ################################################################################
>  #
>  # Components Section - list of all EDK II Modules needed by this Platform
> @@ -394,6 +420,11 @@
>    ArmPlatformPkg/MemoryInitPei/MemoryInitPeim.inf
>    ArmPkg/Drivers/CpuPei/CpuPei.inf
>    MdeModulePkg/Universal/Variable/Pei/VariablePei.inf
> +!if $(CAPSULE_ENABLE)
> +  MdeModulePkg/Universal/FaultTolerantWritePei/FaultTolerantWritePei.inf
> +  MdeModulePkg/Universal/CapsulePei/CapsulePei.inf
> +  Silicon/Marvell/Armada7k8k/Feature/Capsule/SystemFirmwareDescriptor/SystemFirmwareDescriptor.inf
> +!endif
>    MdeModulePkg/Core/DxeIplPeim/DxeIpl.inf {
>      <LibraryClasses>
>        NULL|MdeModulePkg/Library/LzmaCustomDecompressLib/LzmaCustomDecompressLib.inf
> @@ -503,6 +534,16 @@
>        NULL|MdeModulePkg/Library/BootMaintenanceManagerUiLib/BootMaintenanceManagerUiLib.inf
>    }
>  
> +!if $(CAPSULE_ENABLE)
> +  MdeModulePkg/Universal/EsrtDxe/EsrtDxe.inf
> +  SignedCapsulePkg/Universal/SystemFirmwareUpdate/SystemFirmwareReportDxe.inf
> +  SignedCapsulePkg/Universal/SystemFirmwareUpdate/SystemFirmwareUpdateDxe.inf {
> +    <LibraryClasses>
> +      FmpAuthenticationLib|SecurityPkg/Library/FmpAuthenticationLibPkcs7/FmpAuthenticationLibPkcs7.inf
> +  }
> +  MdeModulePkg/Application/CapsuleApp/CapsuleApp.inf
> +!endif
> +
>    #
>    # Variable services
>    #
> -- 
> 2.7.4
> 


  reply	other threads:[~2018-06-04 10:08 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-06-04  5:29 [platforms PATCH v2 0/5] Armada capsule support Marcin Wojtas
2018-06-04  5:29 ` [platforms PATCH v2 1/5] Marvell/Armada70x0Db: Shift main FV from 0x0 address Marcin Wojtas
2018-06-04  5:29 ` [platforms PATCH v2 2/5] Marvell/Aramda7k8k: Enable PEI booting stage Marcin Wojtas
2018-06-04  5:29 ` [platforms PATCH v2 3/5] Marvell/Drivers: MvSpiFlashDxe: Add progress API Marcin Wojtas
2018-06-04  5:29 ` [platforms PATCH v2 4/5] Marvell/Armada7k8k: Introduce capsule FW update implementation Marcin Wojtas
2018-06-04  5:29 ` [platforms PATCH v2 5/5] Marvell/Armada7k8k: Wire up capsule support Marcin Wojtas
2018-06-04 10:08   ` Leif Lindholm [this message]
2018-06-04 11:44     ` Marcin Wojtas

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-list from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180604100817.2of3p2bbxairankc@bivouac.eciton.net \
    --to=devel@edk2.groups.io \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox