From: Leif Lindholm <leif.lindholm@linaro.org>
To: Marcin Wojtas <mw@semihalf.com>
Cc: edk2-devel@lists.01.org, ard.biesheuvel@linaro.org,
nadavh@marvell.com, jinghua@marvell.com, jsd@semihalf.com,
jaz@semihalf.com
Subject: Re: [platforms PATCH 08/25] Marvell/Armada7k8k: Extend ArmadaSoCDescLib with PP2 information
Date: Tue, 12 Jun 2018 19:21:28 +0100 [thread overview]
Message-ID: <20180612182128.kgozd2zhwuwh6pzc@bivouac.eciton.net> (raw)
In-Reply-To: <1528472063-1660-9-git-send-email-mw@semihalf.com>
On Fri, Jun 08, 2018 at 05:34:06PM +0200, Marcin Wojtas wrote:
> This patch introduces new library callback (ArmadaSoCDescPp2Get ()),
> which dynamically allocates and fills MV_SOC_PP2_DESC structure with
> the SoC description of PP2 NICs.
>
> Contributed-under: TianoCore Contribution Agreement 1.1
> Signed-off-by: Marcin Wojtas <mw@semihalf.com>
> Reviewed-by: Hua Jing <jinghua@marvell.com>
> ---
> Silicon/Marvell/Armada7k8k/Library/Armada7k8kSoCDescLib/Armada7k8kSoCDescLib.c | 34 ++++++++++++++++++++
> Silicon/Marvell/Include/Library/ArmadaSoCDescLib.h | 15 +++++++++
> 2 files changed, 49 insertions(+)
>
> diff --git a/Silicon/Marvell/Armada7k8k/Library/Armada7k8kSoCDescLib/Armada7k8kSoCDescLib.c b/Silicon/Marvell/Armada7k8k/Library/Armada7k8kSoCDescLib/Armada7k8kSoCDescLib.c
> index 0ee943b..36b445e 100644
> --- a/Silicon/Marvell/Armada7k8k/Library/Armada7k8kSoCDescLib/Armada7k8kSoCDescLib.c
> +++ b/Silicon/Marvell/Armada7k8k/Library/Armada7k8kSoCDescLib/Armada7k8kSoCDescLib.c
> @@ -32,6 +32,40 @@
> #define MV_SOC_CP_BASE(Cp) (0xF2000000 + (Cp) * 0x2000000)
>
> //
> +// Platform description of PP2 NIC
> +//
> +#define MV_SOC_PP2_BASE(Cp) MV_SOC_CP_BASE ((Cp))
> +#define MV_SOC_PP2_CLK_FREQ 333333333
> +
> +EFI_STATUS
> +EFIAPI
> +ArmadaSoCDescPp2Get (
> + IN OUT MV_SOC_PP2_DESC **Pp2Desc,
> + IN OUT UINT8 *DescCount
> + )
> +{
> + MV_SOC_PP2_DESC *Desc;
> + UINT8 CpCount = FixedPcdGet8 (PcdMaxCpCount);
Please use UINTN for counters.
/
Leif
> + UINT8 CpIndex;
> +
> + Desc = AllocateZeroPool (CpCount * sizeof (MV_SOC_PP2_DESC));
> + if (Desc == NULL) {
> + DEBUG ((DEBUG_ERROR, "%a: Cannot allocate memory\n", __FUNCTION__));
> + return EFI_OUT_OF_RESOURCES;
> + }
> +
> + for (CpIndex = 0; CpIndex < CpCount; CpIndex++) {
> + Desc[CpIndex].Pp2BaseAddress = MV_SOC_PP2_BASE (CpIndex);
> + Desc[CpIndex].Pp2ClockFrequency = MV_SOC_PP2_CLK_FREQ;
> + }
> +
> + *Pp2Desc = Desc;
> + *DescCount = CpCount;
> +
> + return EFI_SUCCESS;
> +}
> +
> +//
> // Platform description of UTMI PHY's
> //
> #define MV_SOC_UTMI_PER_CP_COUNT 2
> diff --git a/Silicon/Marvell/Include/Library/ArmadaSoCDescLib.h b/Silicon/Marvell/Include/Library/ArmadaSoCDescLib.h
> index 22f5c17..559642b 100644
> --- a/Silicon/Marvell/Include/Library/ArmadaSoCDescLib.h
> +++ b/Silicon/Marvell/Include/Library/ArmadaSoCDescLib.h
> @@ -15,6 +15,21 @@
> #define __ARMADA_SOC_DESC_LIB_H__
>
> //
> +// PP2 NIC devices SoC description
> +//
> +typedef struct {
> + UINTN Pp2BaseAddress;
> + UINTN Pp2ClockFrequency;
> +} MV_SOC_PP2_DESC;
> +
> +EFI_STATUS
> +EFIAPI
> +ArmadaSoCDescPp2Get (
> + IN OUT MV_SOC_PP2_DESC **Pp2Desc,
> + IN OUT UINT8 *DescCount
> + );
> +
> +//
> // UTMI PHY devices SoC description
> //
> typedef struct {
> --
> 2.7.4
>
next prev parent reply other threads:[~2018-06-12 18:21 UTC|newest]
Thread overview: 50+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-06-08 15:33 [platforms PATCH 00/25] Armada herdware description rework Marcin Wojtas
2018-06-08 15:33 ` [platforms PATCH 01/25] Marvell/Library: Introduce ArmadaSoCDescLib class Marcin Wojtas
2018-06-12 15:16 ` Leif Lindholm
2018-06-08 15:34 ` [platforms PATCH 02/25] Marvell/Library: Introduce ArmadaBoardDescLib class Marcin Wojtas
2018-06-12 15:36 ` Leif Lindholm
2018-06-08 15:34 ` [platforms PATCH 03/25] Marvell: Introduce MARVELL_BOARD_DESC_PROTOCOL Marcin Wojtas
2018-06-08 15:34 ` [platforms PATCH 04/25] Marvell/Drivers: MvBoardDescDxe: Introduce board description driver Marcin Wojtas
2018-06-12 16:00 ` Leif Lindholm
2018-06-08 15:34 ` [platforms PATCH 05/25] Marvell/Armada7k8k: Enable board description driver compilation Marcin Wojtas
2018-06-08 15:34 ` [platforms PATCH 06/25] Marvell/Library: UtmiPhyLib: Switch to use MARVELL_BOARD_DESC protocol Marcin Wojtas
2018-06-08 15:34 ` [platforms PATCH 07/25] Marvell/Library: RealTimeClockLib: Simplify obtaining base address Marcin Wojtas
2018-06-08 15:34 ` [platforms PATCH 08/25] Marvell/Armada7k8k: Extend ArmadaSoCDescLib with PP2 information Marcin Wojtas
2018-06-12 18:21 ` Leif Lindholm [this message]
2018-06-08 15:34 ` [platforms PATCH 09/25] Marvell/Drivers: MvBoardDesc: Extend protocol with PP2 support Marcin Wojtas
2018-06-12 18:24 ` Leif Lindholm
2018-06-08 15:34 ` [platforms PATCH 10/25] Marvell/Drivers: Pp2Dxe: Switch to use MARVELL_BOARD_DESC protocol Marcin Wojtas
2018-06-12 20:25 ` Leif Lindholm
2018-06-08 15:34 ` [platforms PATCH 11/25] Marvell/Armada7k8k: Extend ArmadaSoCDescLib with AHCI/SDMMC/XHCI Marcin Wojtas
2018-06-12 18:37 ` Leif Lindholm
2018-06-08 15:34 ` [platforms PATCH 12/25] Marvell/Drivers: MvBoardDesc: Extend protocol " Marcin Wojtas
2018-06-12 20:39 ` Leif Lindholm
2018-06-08 15:34 ` [platforms PATCH 13/25] Marvell/Drivers: NonDiscoverable: Switch to use MARVELL_BOARD_DESC Marcin Wojtas
2018-06-08 15:34 ` [platforms PATCH 14/25] Marvell/Library: ComPhyLib: Get AHCI data with MARVELL_BOARD_DESC Marcin Wojtas
2018-06-12 20:46 ` Leif Lindholm
2018-06-08 15:34 ` [platforms PATCH 15/25] Marvell/Armada7k8k: Extend ArmadaSoCDescLib with ComPhy information Marcin Wojtas
2018-06-12 20:51 ` Leif Lindholm
2018-06-08 15:34 ` [platforms PATCH 16/25] Marvell/Drivers: MvBoardDesc: Extend protocol with COMPHY support Marcin Wojtas
2018-06-12 21:02 ` Leif Lindholm
2018-06-08 15:34 ` [platforms PATCH 17/25] Marvell/Library: ComPhyLib: Switch library to use MARVELL_BOARD_DESC Marcin Wojtas
2018-06-12 21:12 ` Leif Lindholm
2018-06-08 15:34 ` [platforms PATCH 18/25] Marvell/Armada7k8k: Extend ArmadaSoCDescLib with MDIO information Marcin Wojtas
2018-06-12 21:18 ` Leif Lindholm
2018-06-08 15:34 ` [platforms PATCH 19/25] Marvell/Drivers: MvBoardDesc: Extend protocol with MDIO support Marcin Wojtas
2018-06-12 21:24 ` Leif Lindholm
2018-06-08 15:34 ` [platforms PATCH 20/25] Marvell/Drivers: MvMdioDxe: Enable 64bit addressing Marcin Wojtas
2018-06-08 15:34 ` [platforms PATCH 21/25] Marvell/Drivers: MvMdioDxe: Switch driver to use MARVELL_BOARD_DESC Marcin Wojtas
2018-06-08 15:34 ` [platforms PATCH 22/25] Marvell/Armada7k8k: Extend ArmadaSoCDescLib with I2C information Marcin Wojtas
2018-06-12 22:26 ` Leif Lindholm
2018-06-08 15:34 ` [platforms PATCH 23/25] Marvell/Drivers: MvBoardDesc: Extend protocol with I2C support Marcin Wojtas
2018-06-12 22:41 ` Leif Lindholm
2018-06-08 15:34 ` [platforms PATCH 24/25] Marvell/Drivers: MvI2cDxe: Switch driver to use MARVELL_BOARD_DESC Marcin Wojtas
2018-06-12 22:42 ` Leif Lindholm
2018-06-08 15:34 ` [platforms PATCH 25/25] Marvell/Drivers: MvPhyDxe: Remove MvHwDescLib.h dependency Marcin Wojtas
2018-06-12 22:44 ` Leif Lindholm
2018-06-11 11:00 ` [platforms PATCH 00/25] Armada herdware description rework Ard Biesheuvel
2018-06-11 11:49 ` Marcin Wojtas
2018-06-11 12:01 ` Ard Biesheuvel
2018-06-11 12:04 ` Marcin Wojtas
2018-06-12 22:48 ` Leif Lindholm
2018-06-13 7:40 ` Marcin Wojtas
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180612182128.kgozd2zhwuwh6pzc@bivouac.eciton.net \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox