From: Leif Lindholm <leif.lindholm@linaro.org>
To: Marcin Wojtas <mw@semihalf.com>
Cc: edk2-devel@lists.01.org, ard.biesheuvel@linaro.org,
nadavh@marvell.com, jinghua@marvell.com, jsd@semihalf.com,
jaz@semihalf.com
Subject: Re: [platforms PATCH 14/25] Marvell/Library: ComPhyLib: Get AHCI data with MARVELL_BOARD_DESC
Date: Tue, 12 Jun 2018 21:46:00 +0100 [thread overview]
Message-ID: <20180612204600.exw7obvzertg6pgo@bivouac.eciton.net> (raw)
In-Reply-To: <1528472063-1660-15-git-send-email-mw@semihalf.com>
On Fri, Jun 08, 2018 at 05:34:12PM +0200, Marcin Wojtas wrote:
> ComPhy Library used to get Armada7k8k AHCI/SDMMC/XHCI controller
> description from hardcoded values stored in the header file
> MvHwDescLib.h. As a result it is very hard to support other
> Armada SoC families with this library.
>
> This patch updates the driver to get AHCI controller
> description from newly introduced MARVELL_BOARD_DESC protocol,
> and removes the dependency on the hardcoded structures.
>
> Contributed-under: TianoCore Contribution Agreement 1.1
> Signed-off-by: Marcin Wojtas <mw@semihalf.com>
> Reviewed-by: Hua Jing <jinghua@marvell.com>
> ---
> Silicon/Marvell/Armada7k8k/Library/Armada7k8kLib/Armada7k8kLib.inf | 1 -
> Silicon/Marvell/Include/Library/MvHwDescLib.h | 60 --------------------
> Silicon/Marvell/Library/ComPhyLib/ComPhyCp110.c | 50 ++++++++--------
> Silicon/Marvell/Library/ComPhyLib/ComPhyLib.h | 4 ++
> Silicon/Marvell/Library/ComPhyLib/ComPhyLib.inf | 6 +-
> 5 files changed, 35 insertions(+), 86 deletions(-)
>
> diff --git a/Silicon/Marvell/Armada7k8k/Library/Armada7k8kLib/Armada7k8kLib.inf b/Silicon/Marvell/Armada7k8k/Library/Armada7k8kLib/Armada7k8kLib.inf
> index f2c173c..e888566 100644
> --- a/Silicon/Marvell/Armada7k8k/Library/Armada7k8kLib/Armada7k8kLib.inf
> +++ b/Silicon/Marvell/Armada7k8k/Library/Armada7k8kLib/Armada7k8kLib.inf
> @@ -47,7 +47,6 @@
>
> [LibraryClasses]
> ArmLib
> - ComPhyLib
> DebugLib
> MemoryAllocationLib
> MppLib
> diff --git a/Silicon/Marvell/Include/Library/MvHwDescLib.h b/Silicon/Marvell/Include/Library/MvHwDescLib.h
> index 5fd514c..9f383f4 100644
> --- a/Silicon/Marvell/Include/Library/MvHwDescLib.h
> +++ b/Silicon/Marvell/Include/Library/MvHwDescLib.h
> @@ -36,7 +36,6 @@ SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
> #define __MVHWDESCLIB_H__
>
> #include <Library/MvComPhyLib.h>
> -#include <Library/NonDiscoverableDeviceRegistrationLib.h>
>
> //
> // Helper macros
> @@ -80,31 +79,6 @@ typedef struct {
> } MVHW_MDIO_DESC;
>
> //
> -// NonDiscoverable devices description template definition
> -//
> -#define MVHW_MAX_XHCI_DEVS 4
> -#define MVHW_MAX_AHCI_DEVS 4
> -#define MVHW_MAX_SDHCI_DEVS 4
> -
> -typedef struct {
> - // XHCI
> - UINT8 XhciDevCount;
> - UINTN XhciBaseAddresses[MVHW_MAX_XHCI_DEVS];
> - UINTN XhciMemSize[MVHW_MAX_XHCI_DEVS];
> - NON_DISCOVERABLE_DEVICE_DMA_TYPE XhciDmaType[MVHW_MAX_XHCI_DEVS];
> - // AHCI
> - UINT8 AhciDevCount;
> - UINTN AhciBaseAddresses[MVHW_MAX_AHCI_DEVS];
> - UINTN AhciMemSize[MVHW_MAX_AHCI_DEVS];
> - NON_DISCOVERABLE_DEVICE_DMA_TYPE AhciDmaType[MVHW_MAX_AHCI_DEVS];
> - // SDHCI
> - UINT8 SdhciDevCount;
> - UINTN SdhciBaseAddresses[MVHW_MAX_SDHCI_DEVS];
> - UINTN SdhciMemSize[MVHW_MAX_SDHCI_DEVS];
> - NON_DISCOVERABLE_DEVICE_DMA_TYPE SdhciDmaType[MVHW_MAX_SDHCI_DEVS];
> -} MVHW_NONDISCOVERABLE_DESC;
> -
> -//
> // Platform description of CommonPhy devices
> //
> #define MVHW_CP0_COMPHY_BASE 0xF2441000
> @@ -155,38 +129,4 @@ MVHW_MDIO_DESC mA7k8kMdioDescTemplate = {\
> { MVHW_CP0_MDIO_BASE, MVHW_CP1_MDIO_BASE }\
> }
>
> -//
> -// Platform description of NonDiscoverable devices
> -//
> -#define MVHW_CP0_XHCI0_BASE 0xF2500000
> -#define MVHW_CP0_XHCI1_BASE 0xF2510000
> -#define MVHW_CP1_XHCI0_BASE 0xF4500000
> -#define MVHW_CP1_XHCI1_BASE 0xF4510000
> -
> -#define MVHW_CP0_AHCI0_BASE 0xF2540000
> -#define MVHW_CP0_AHCI0_ID 0
> -#define MVHW_CP1_AHCI0_BASE 0xF4540000
> -#define MVHW_CP1_AHCI0_ID 1
> -
> -#define MVHW_AP0_SDHCI0_BASE 0xF06E0000
> -#define MVHW_CP0_SDHCI0_BASE 0xF2780000
> -
> -#define DECLARE_A7K8K_NONDISCOVERABLE_TEMPLATE \
> -STATIC \
> -MVHW_NONDISCOVERABLE_DESC mA7k8kNonDiscoverableDescTemplate = {\
> - 4, /* XHCI */\
> - { MVHW_CP0_XHCI0_BASE, MVHW_CP0_XHCI1_BASE, MVHW_CP1_XHCI0_BASE, MVHW_CP1_XHCI1_BASE },\
> - { SIZE_16KB, SIZE_16KB, SIZE_16KB, SIZE_16KB },\
> - { NonDiscoverableDeviceDmaTypeCoherent, NonDiscoverableDeviceDmaTypeCoherent,\
> - NonDiscoverableDeviceDmaTypeCoherent, NonDiscoverableDeviceDmaTypeCoherent },\
> - 2, /* AHCI */\
> - { MVHW_CP0_AHCI0_BASE, MVHW_CP1_AHCI0_BASE },\
> - { SIZE_8KB, SIZE_8KB },\
> - { NonDiscoverableDeviceDmaTypeCoherent, NonDiscoverableDeviceDmaTypeCoherent },\
> - 2, /* SDHCI */\
> - { MVHW_AP0_SDHCI0_BASE, MVHW_CP0_SDHCI0_BASE },\
> - { SIZE_1KB, SIZE_1KB },\
> - { NonDiscoverableDeviceDmaTypeCoherent, NonDiscoverableDeviceDmaTypeCoherent }\
> -}
> -
> #endif /* __MVHWDESCLIB_H__ */
> diff --git a/Silicon/Marvell/Library/ComPhyLib/ComPhyCp110.c b/Silicon/Marvell/Library/ComPhyLib/ComPhyCp110.c
> index 09994ca..3c696fb 100755
> --- a/Silicon/Marvell/Library/ComPhyLib/ComPhyCp110.c
> +++ b/Silicon/Marvell/Library/ComPhyLib/ComPhyCp110.c
> @@ -33,7 +33,6 @@ SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
> *******************************************************************************/
>
> #include "ComPhyLib.h"
> -#include <Library/MvHwDescLib.h>
> #include <Library/SampleAtResetLib.h>
>
> #define SD_LANE_ADDR_WIDTH 0x1000
> @@ -46,8 +45,6 @@ SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
> #define CP110_PCIE_REF_CLK_TYPE0 0
> #define CP110_PCIE_REF_CLK_TYPE12 1
>
> -DECLARE_A7K8K_NONDISCOVERABLE_TEMPLATE;
> -
> /*
> * For CP-110 we have 2 Selector registers "PHY Selectors"
> * and " PIPE Selectors".
> @@ -1138,36 +1135,23 @@ ComPhySataCheckPll (
> STATIC
> UINTN
> ComPhySataPowerUp (
> + IN UINT8 ChipId,
UINTN.
/
Leif
> IN UINT32 Lane,
> IN EFI_PHYSICAL_ADDRESS HpipeBase,
> IN EFI_PHYSICAL_ADDRESS ComPhyBase,
> - IN UINT8 SataHostId
> + IN MV_BOARD_AHCI_DESC *Desc
> )
> {
> EFI_STATUS Status;
> - UINT8 *SataDeviceTable;
> - MVHW_NONDISCOVERABLE_DESC *Desc = &mA7k8kNonDiscoverableDescTemplate;
> EFI_PHYSICAL_ADDRESS HpipeAddr = HPIPE_ADDR(HpipeBase, Lane);
> EFI_PHYSICAL_ADDRESS SdIpAddr = SD_ADDR(HpipeBase, Lane);
> EFI_PHYSICAL_ADDRESS ComPhyAddr = COMPHY_ADDR(ComPhyBase, Lane);
>
> - SataDeviceTable = (UINT8 *) PcdGetPtr (PcdPciEAhci);
> -
> - if (SataDeviceTable == NULL || SataHostId >= PcdGetSize (PcdPciEAhci)) {
> - DEBUG ((DEBUG_ERROR, "ComPhySata: Sata host %d is undefined\n", SataHostId));
> - return EFI_INVALID_PARAMETER;
> - }
> -
> - if (!MVHW_DEV_ENABLED (Sata, SataHostId)) {
> - DEBUG ((DEBUG_ERROR, "ComPhySata: Sata host %d is disabled\n", SataHostId));
> - return EFI_INVALID_PARAMETER;
> - }
> -
> DEBUG ((DEBUG_INFO, "ComPhySata: Initialize SATA PHYs\n"));
>
> DEBUG((DEBUG_INFO, "ComPhySataPowerUp: stage: MAC configuration - power down ComPhy\n"));
>
> - ComPhySataMacPowerDown (Desc->AhciBaseAddresses[SataHostId]);
> + ComPhySataMacPowerDown (Desc[ChipId].SoC->AhciBaseAddress);
>
> DEBUG((DEBUG_INFO, "ComPhy: stage: RFU configurations - hard reset ComPhy\n"));
>
> @@ -1183,7 +1167,7 @@ ComPhySataPowerUp (
>
> DEBUG((DEBUG_INFO, "ComPhy: stage: ComPhy power up\n"));
>
> - ComPhySataPhyPowerUp (Desc->AhciBaseAddresses[SataHostId]);
> + ComPhySataPhyPowerUp (Desc[ChipId].SoC->AhciBaseAddress);
>
> DEBUG((DEBUG_INFO, "ComPhy: stage: Check PLL\n"));
>
> @@ -1884,6 +1868,8 @@ ComPhyCp110Init (
> EFI_STATUS Status;
> COMPHY_MAP *PtrComPhyMap, *SerdesMap;
> EFI_PHYSICAL_ADDRESS ComPhyBaseAddr, HpipeBaseAddr;
> + MARVELL_BOARD_DESC_PROTOCOL *BoardDescProtocol;
> + MV_BOARD_AHCI_DESC *AhciBoardDesc;
> UINT32 ComPhyMaxCount, Lane;
> UINT32 PcieWidth = 0;
> UINT8 ChipId;
> @@ -1927,11 +1913,29 @@ ComPhyCp110Init (
> break;
> case COMPHY_TYPE_SATA0:
> case COMPHY_TYPE_SATA1:
> - Status = ComPhySataPowerUp (Lane, HpipeBaseAddr, ComPhyBaseAddr, MVHW_CP0_AHCI0_ID);
> - break;
> case COMPHY_TYPE_SATA2:
> case COMPHY_TYPE_SATA3:
> - Status = ComPhySataPowerUp (Lane, HpipeBaseAddr, ComPhyBaseAddr, MVHW_CP1_AHCI0_ID);
> + /* Obtain AHCI board description */
> + Status = gBS->LocateProtocol (&gMarvellBoardDescProtocolGuid,
> + NULL,
> + (VOID **)&BoardDescProtocol);
> + if (EFI_ERROR (Status)) {
> + break;
> + }
> +
> + Status = BoardDescProtocol->BoardDescAhciGet (BoardDescProtocol,
> + &AhciBoardDesc);
> + if (EFI_ERROR (Status)) {
> + break;
> + }
> +
> + Status = ComPhySataPowerUp (ChipId,
> + Lane,
> + HpipeBaseAddr,
> + ComPhyBaseAddr,
> + AhciBoardDesc);
> +
> + BoardDescProtocol->BoardDescFree (AhciBoardDesc);
> break;
> case COMPHY_TYPE_USB3_HOST0:
> case COMPHY_TYPE_USB3_HOST1:
> diff --git a/Silicon/Marvell/Library/ComPhyLib/ComPhyLib.h b/Silicon/Marvell/Library/ComPhyLib/ComPhyLib.h
> index c675d74..090116d 100644
> --- a/Silicon/Marvell/Library/ComPhyLib/ComPhyLib.h
> +++ b/Silicon/Marvell/Library/ComPhyLib/ComPhyLib.h
> @@ -35,6 +35,7 @@ SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
> #ifndef __COMPHY_H__
> #define __COMPHY_H__
>
> +#include <Uefi.h>
> #include <Library/ArmLib.h>
> #include <Library/ArmPlatformLib.h>
> #include <Library/DebugLib.h>
> @@ -43,6 +44,9 @@ SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
> #include <Library/MvComPhyLib.h>
> #include <Library/IoLib.h>
> #include <Library/TimerLib.h>
> +#include <Library/UefiBootServicesTableLib.h>
> +
> +#include <Protocol/BoardDesc.h>
>
> #define MAX_LANE_OPTIONS 10
>
> diff --git a/Silicon/Marvell/Library/ComPhyLib/ComPhyLib.inf b/Silicon/Marvell/Library/ComPhyLib/ComPhyLib.inf
> index ce0af54..f36c701 100644
> --- a/Silicon/Marvell/Library/ComPhyLib/ComPhyLib.inf
> +++ b/Silicon/Marvell/Library/ComPhyLib/ComPhyLib.inf
> @@ -52,12 +52,16 @@
> PcdLib
> SampleAtResetLib
> IoLib
> + UefiBootServicesTableLib
>
> [Sources.common]
> ComPhyLib.c
> ComPhyCp110.c
> ComPhyMux.c
>
> +[Protocols]
> + gMarvellBoardDescProtocolGuid ## CONSUMES
> +
> [FixedPcd]
> gMarvellTokenSpaceGuid.PcdComPhyDevices
>
> @@ -80,5 +84,3 @@
> gMarvellTokenSpaceGuid.PcdChip3ComPhyTypes
> gMarvellTokenSpaceGuid.PcdChip3ComPhySpeeds
> gMarvellTokenSpaceGuid.PcdChip3ComPhyInvFlags
> -
> - gMarvellTokenSpaceGuid.PcdPciEAhci
> --
> 2.7.4
>
next prev parent reply other threads:[~2018-06-12 20:46 UTC|newest]
Thread overview: 50+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-06-08 15:33 [platforms PATCH 00/25] Armada herdware description rework Marcin Wojtas
2018-06-08 15:33 ` [platforms PATCH 01/25] Marvell/Library: Introduce ArmadaSoCDescLib class Marcin Wojtas
2018-06-12 15:16 ` Leif Lindholm
2018-06-08 15:34 ` [platforms PATCH 02/25] Marvell/Library: Introduce ArmadaBoardDescLib class Marcin Wojtas
2018-06-12 15:36 ` Leif Lindholm
2018-06-08 15:34 ` [platforms PATCH 03/25] Marvell: Introduce MARVELL_BOARD_DESC_PROTOCOL Marcin Wojtas
2018-06-08 15:34 ` [platforms PATCH 04/25] Marvell/Drivers: MvBoardDescDxe: Introduce board description driver Marcin Wojtas
2018-06-12 16:00 ` Leif Lindholm
2018-06-08 15:34 ` [platforms PATCH 05/25] Marvell/Armada7k8k: Enable board description driver compilation Marcin Wojtas
2018-06-08 15:34 ` [platforms PATCH 06/25] Marvell/Library: UtmiPhyLib: Switch to use MARVELL_BOARD_DESC protocol Marcin Wojtas
2018-06-08 15:34 ` [platforms PATCH 07/25] Marvell/Library: RealTimeClockLib: Simplify obtaining base address Marcin Wojtas
2018-06-08 15:34 ` [platforms PATCH 08/25] Marvell/Armada7k8k: Extend ArmadaSoCDescLib with PP2 information Marcin Wojtas
2018-06-12 18:21 ` Leif Lindholm
2018-06-08 15:34 ` [platforms PATCH 09/25] Marvell/Drivers: MvBoardDesc: Extend protocol with PP2 support Marcin Wojtas
2018-06-12 18:24 ` Leif Lindholm
2018-06-08 15:34 ` [platforms PATCH 10/25] Marvell/Drivers: Pp2Dxe: Switch to use MARVELL_BOARD_DESC protocol Marcin Wojtas
2018-06-12 20:25 ` Leif Lindholm
2018-06-08 15:34 ` [platforms PATCH 11/25] Marvell/Armada7k8k: Extend ArmadaSoCDescLib with AHCI/SDMMC/XHCI Marcin Wojtas
2018-06-12 18:37 ` Leif Lindholm
2018-06-08 15:34 ` [platforms PATCH 12/25] Marvell/Drivers: MvBoardDesc: Extend protocol " Marcin Wojtas
2018-06-12 20:39 ` Leif Lindholm
2018-06-08 15:34 ` [platforms PATCH 13/25] Marvell/Drivers: NonDiscoverable: Switch to use MARVELL_BOARD_DESC Marcin Wojtas
2018-06-08 15:34 ` [platforms PATCH 14/25] Marvell/Library: ComPhyLib: Get AHCI data with MARVELL_BOARD_DESC Marcin Wojtas
2018-06-12 20:46 ` Leif Lindholm [this message]
2018-06-08 15:34 ` [platforms PATCH 15/25] Marvell/Armada7k8k: Extend ArmadaSoCDescLib with ComPhy information Marcin Wojtas
2018-06-12 20:51 ` Leif Lindholm
2018-06-08 15:34 ` [platforms PATCH 16/25] Marvell/Drivers: MvBoardDesc: Extend protocol with COMPHY support Marcin Wojtas
2018-06-12 21:02 ` Leif Lindholm
2018-06-08 15:34 ` [platforms PATCH 17/25] Marvell/Library: ComPhyLib: Switch library to use MARVELL_BOARD_DESC Marcin Wojtas
2018-06-12 21:12 ` Leif Lindholm
2018-06-08 15:34 ` [platforms PATCH 18/25] Marvell/Armada7k8k: Extend ArmadaSoCDescLib with MDIO information Marcin Wojtas
2018-06-12 21:18 ` Leif Lindholm
2018-06-08 15:34 ` [platforms PATCH 19/25] Marvell/Drivers: MvBoardDesc: Extend protocol with MDIO support Marcin Wojtas
2018-06-12 21:24 ` Leif Lindholm
2018-06-08 15:34 ` [platforms PATCH 20/25] Marvell/Drivers: MvMdioDxe: Enable 64bit addressing Marcin Wojtas
2018-06-08 15:34 ` [platforms PATCH 21/25] Marvell/Drivers: MvMdioDxe: Switch driver to use MARVELL_BOARD_DESC Marcin Wojtas
2018-06-08 15:34 ` [platforms PATCH 22/25] Marvell/Armada7k8k: Extend ArmadaSoCDescLib with I2C information Marcin Wojtas
2018-06-12 22:26 ` Leif Lindholm
2018-06-08 15:34 ` [platforms PATCH 23/25] Marvell/Drivers: MvBoardDesc: Extend protocol with I2C support Marcin Wojtas
2018-06-12 22:41 ` Leif Lindholm
2018-06-08 15:34 ` [platforms PATCH 24/25] Marvell/Drivers: MvI2cDxe: Switch driver to use MARVELL_BOARD_DESC Marcin Wojtas
2018-06-12 22:42 ` Leif Lindholm
2018-06-08 15:34 ` [platforms PATCH 25/25] Marvell/Drivers: MvPhyDxe: Remove MvHwDescLib.h dependency Marcin Wojtas
2018-06-12 22:44 ` Leif Lindholm
2018-06-11 11:00 ` [platforms PATCH 00/25] Armada herdware description rework Ard Biesheuvel
2018-06-11 11:49 ` Marcin Wojtas
2018-06-11 12:01 ` Ard Biesheuvel
2018-06-11 12:04 ` Marcin Wojtas
2018-06-12 22:48 ` Leif Lindholm
2018-06-13 7:40 ` Marcin Wojtas
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180612204600.exw7obvzertg6pgo@bivouac.eciton.net \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox