From: Leif Lindholm <leif.lindholm@linaro.org>
To: Marcin Wojtas <mw@semihalf.com>
Cc: edk2-devel@lists.01.org, ard.biesheuvel@linaro.org,
nadavh@marvell.com, jinghua@marvell.com, jsd@semihalf.com,
jaz@semihalf.com
Subject: Re: [platforms: PATCH v2 09/25] Marvell/Drivers: MvBoardDesc: Extend protocol with PP2 support
Date: Mon, 18 Jun 2018 16:53:09 +0100 [thread overview]
Message-ID: <20180618155309.lgiiradea4cnkcqn@bivouac.eciton.net> (raw)
In-Reply-To: <1529266325-18371-10-git-send-email-mw@semihalf.com>
On Sun, Jun 17, 2018 at 10:11:49PM +0200, Marcin Wojtas wrote:
> Introduce new callback that can provide information
> about PP2 NICs to the Pp2Dxe driver.
>
> Extend ArmadaBoardDescLib with new structure MV_BOARD_PP2_DESC,
> for holding board specific data. In further steps it should
> be extended and replace PCD port's representation with the
> appropriate structures.
>
> Contributed-under: TianoCore Contribution Agreement 1.1
> Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
> ---
> Silicon/Marvell/Drivers/BoardDesc/MvBoardDescDxe.inf | 1 +
> Silicon/Marvell/Include/Library/ArmadaBoardDescLib.h | 8 +++
> Silicon/Marvell/Include/Protocol/BoardDesc.h | 8 +++
> Silicon/Marvell/Drivers/BoardDesc/MvBoardDescDxe.c | 63 ++++++++++++++++++++
> 4 files changed, 80 insertions(+)
>
> diff --git a/Silicon/Marvell/Drivers/BoardDesc/MvBoardDescDxe.inf b/Silicon/Marvell/Drivers/BoardDesc/MvBoardDescDxe.inf
> index 5da5f21..6f57f06 100644
> --- a/Silicon/Marvell/Drivers/BoardDesc/MvBoardDescDxe.inf
> +++ b/Silicon/Marvell/Drivers/BoardDesc/MvBoardDescDxe.inf
> @@ -58,6 +58,7 @@
>
> [Pcd]
> gMarvellTokenSpaceGuid.PcdPciEXhci
> + gMarvellTokenSpaceGuid.PcdPp2Controllers
> gMarvellTokenSpaceGuid.PcdUtmiControllersEnabled
> gMarvellTokenSpaceGuid.PcdUtmiPortType
>
> diff --git a/Silicon/Marvell/Include/Library/ArmadaBoardDescLib.h b/Silicon/Marvell/Include/Library/ArmadaBoardDescLib.h
> index 068535a..ab94877 100644
> --- a/Silicon/Marvell/Include/Library/ArmadaBoardDescLib.h
> +++ b/Silicon/Marvell/Include/Library/ArmadaBoardDescLib.h
> @@ -17,6 +17,14 @@
> #include <Library/ArmadaSoCDescLib.h>
>
> //
> +// PP2 NIC devices per-board description
> +//
> +typedef struct {
> + MV_SOC_PP2_DESC *SoC;
> + UINT8 Pp2DevCount;
> +} MV_BOARD_PP2_DESC;
> +
> +//
> // UTMI PHY devices per-board description
> //
> typedef struct {
> diff --git a/Silicon/Marvell/Include/Protocol/BoardDesc.h b/Silicon/Marvell/Include/Protocol/BoardDesc.h
> index f8a2902..114a0ec 100644
> --- a/Silicon/Marvell/Include/Protocol/BoardDesc.h
> +++ b/Silicon/Marvell/Include/Protocol/BoardDesc.h
> @@ -43,6 +43,13 @@ typedef struct _MARVELL_BOARD_DESC_PROTOCOL MARVELL_BOARD_DESC_PROTOCOL;
>
> typedef
> EFI_STATUS
> +(EFIAPI *MV_BOARD_DESC_PP2_GET) (
> + IN MARVELL_BOARD_DESC_PROTOCOL *This,
> + IN OUT MV_BOARD_PP2_DESC **Pp2Desc
> + );
> +
> +typedef
> +EFI_STATUS
> (EFIAPI *MV_BOARD_DESC_UTMI_GET) (
> IN MARVELL_BOARD_DESC_PROTOCOL *This,
> IN OUT MV_BOARD_UTMI_DESC **UtmiDesc
> @@ -55,6 +62,7 @@ VOID
> );
>
> struct _MARVELL_BOARD_DESC_PROTOCOL {
> + MV_BOARD_DESC_PP2_GET BoardDescPp2Get;
> MV_BOARD_DESC_UTMI_GET BoardDescUtmiGet;
> MV_BOARD_DESC_FREE BoardDescFree;
> };
> diff --git a/Silicon/Marvell/Drivers/BoardDesc/MvBoardDescDxe.c b/Silicon/Marvell/Drivers/BoardDesc/MvBoardDescDxe.c
> index 0232a21..7c0bc39 100644
> --- a/Silicon/Marvell/Drivers/BoardDesc/MvBoardDescDxe.c
> +++ b/Silicon/Marvell/Drivers/BoardDesc/MvBoardDescDxe.c
> @@ -37,6 +37,68 @@ MV_BOARD_DESC *mBoardDescInstance;
>
> STATIC
> EFI_STATUS
> +MvBoardDescPp2Get (
> + IN MARVELL_BOARD_DESC_PROTOCOL *This,
> + IN OUT MV_BOARD_PP2_DESC **Pp2Desc
> + )
> +{
> + UINT8 *Pp2DeviceEnabled;
> + UINTN Pp2Count, Pp2DeviceTableSize, Pp2Index, Index;
> + MV_BOARD_PP2_DESC *BoardDesc;
> + MV_SOC_PP2_DESC *SoCDesc;
> + EFI_STATUS Status;
> +
> + /* Get SoC data about all available PP2 controllers */
> + Status = ArmadaSoCDescPp2Get (&SoCDesc, &Pp2Count);
> + if (EFI_ERROR (Status)) {
> + return Status;
> + }
> +
> + /*
> + * Obtain table with enabled Pp2 controllers,
> + * which is represented as an array of UINT8 values
> + * (0x0 - disabled, 0x1 enabled).
> + */
> + Pp2DeviceEnabled = PcdGetPtr (PcdPp2Controllers);
> + if (Pp2DeviceEnabled == NULL) {
> + /* No PP2 NIC on platform */
> + return EFI_SUCCESS;
> + }
> +
> + Pp2DeviceTableSize = PcdGetSize (PcdPp2Controllers);
> +
> + /* Check if PCD with PP2 NICs is correctly defined */
> + if (Pp2DeviceTableSize > Pp2Count) {
> + DEBUG ((DEBUG_ERROR, "%a: Wrong PcdPp2Controllers format\n", __FUNCTION__));
> + return EFI_INVALID_PARAMETER;
> + }
> +
> + /* Allocate and fill board description */
> + BoardDesc = AllocateZeroPool (Pp2DeviceTableSize * sizeof (MV_BOARD_PP2_DESC));
> + if (BoardDesc == NULL) {
> + DEBUG ((DEBUG_ERROR, "%a: Cannot allocate memory\n", __FUNCTION__));
> + return EFI_OUT_OF_RESOURCES;
> + }
> +
> + Pp2Index = 0;
> + for (Index = 0; Index < Pp2DeviceTableSize; Index++) {
> + if (!Pp2DeviceEnabled[Index]) {
> + continue;
> + }
> +
> + BoardDesc[Pp2Index].SoC = &SoCDesc[Index];
> + Pp2Index++;
> + }
> +
> + BoardDesc->Pp2DevCount = Pp2Index;
> +
> + *Pp2Desc = BoardDesc;
> +
> + return EFI_SUCCESS;
> +}
> +
> +STATIC
> +EFI_STATUS
> MvBoardDescUtmiGet (
> IN MARVELL_BOARD_DESC_PROTOCOL *This,
> IN OUT MV_BOARD_UTMI_DESC **UtmiDesc
> @@ -140,6 +202,7 @@ MvBoardDescInitProtocol (
> IN MARVELL_BOARD_DESC_PROTOCOL *BoardDescProtocol
> )
> {
> + BoardDescProtocol->BoardDescPp2Get = MvBoardDescPp2Get;
> BoardDescProtocol->BoardDescUtmiGet = MvBoardDescUtmiGet;
> BoardDescProtocol->BoardDescFree = MvBoardDescFree;
>
> --
> 2.7.4
>
next prev parent reply other threads:[~2018-06-18 15:53 UTC|newest]
Thread overview: 47+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-06-17 20:11 [platforms: PATCH v2 00/25] Armada hardware description rework Marcin Wojtas
2018-06-17 20:11 ` [platforms: PATCH v2 01/25] Marvell/Library: Introduce ArmadaSoCDescLib class Marcin Wojtas
2018-06-18 15:44 ` Leif Lindholm
2018-06-18 15:58 ` Marcin Wojtas
2018-06-18 17:09 ` Leif Lindholm
2018-06-17 20:11 ` [platforms: PATCH v2 02/25] Marvell/Library: Introduce ArmadaBoardDescLib class Marcin Wojtas
2018-06-17 20:11 ` [platforms: PATCH v2 03/25] Marvell: Introduce MARVELL_BOARD_DESC_PROTOCOL Marcin Wojtas
2018-06-17 20:11 ` [platforms: PATCH v2 04/25] Marvell/Drivers: MvBoardDesc: Introduce board description driver Marcin Wojtas
2018-06-18 15:50 ` Leif Lindholm
2018-06-17 20:11 ` [platforms: PATCH v2 05/25] Marvell/Armada7k8k: Enable board description driver compilation Marcin Wojtas
2018-06-17 20:11 ` [platforms: PATCH v2 06/25] Marvell/Library: UtmiPhyLib: Switch to use MARVELL_BOARD_DESC protocol Marcin Wojtas
2018-06-17 20:11 ` [platforms: PATCH v2 07/25] Marvell/Library: RealTimeClockLib: Simplify obtaining base address Marcin Wojtas
2018-06-17 20:11 ` [platforms: PATCH v2 08/25] Marvell/Armada7k8k: Extend ArmadaSoCDescLib with PP2 information Marcin Wojtas
2018-06-18 15:51 ` Leif Lindholm
2018-06-17 20:11 ` [platforms: PATCH v2 09/25] Marvell/Drivers: MvBoardDesc: Extend protocol with PP2 support Marcin Wojtas
2018-06-18 15:53 ` Leif Lindholm [this message]
2018-06-17 20:11 ` [platforms: PATCH v2 10/25] Marvell/Drivers: Pp2Dxe: Switch to use MARVELL_BOARD_DESC protocol Marcin Wojtas
2018-06-18 15:55 ` Leif Lindholm
2018-06-17 20:11 ` [platforms: PATCH v2 11/25] Marvell/Armada7k8k: Extend ArmadaSoCDescLib with AHCI/SDMMC/XHCI Marcin Wojtas
2018-06-18 16:06 ` Leif Lindholm
2018-06-17 20:11 ` [platforms: PATCH v2 12/25] Marvell/Drivers: MvBoardDesc: Extend protocol " Marcin Wojtas
2018-06-18 16:09 ` Leif Lindholm
2018-06-17 20:11 ` [platforms: PATCH v2 13/25] Marvell/Drivers: NonDiscoverable: Switch to use MARVELL_BOARD_DESC Marcin Wojtas
2018-06-17 20:11 ` [platforms: PATCH v2 14/25] Marvell/Library: ComPhyLib: Get AHCI data with MARVELL_BOARD_DESC Marcin Wojtas
2018-06-18 16:15 ` Leif Lindholm
2018-06-17 20:11 ` [platforms: PATCH v2 15/25] Marvell/Armada7k8k: Extend ArmadaSoCDescLib with ComPhy information Marcin Wojtas
2018-06-18 16:18 ` Leif Lindholm
2018-06-17 20:11 ` [platforms: PATCH v2 16/25] Marvell/Drivers: MvBoardDesc: Extend protocol with ComPhy support Marcin Wojtas
2018-06-18 16:19 ` Leif Lindholm
2018-06-17 20:11 ` [platforms: PATCH v2 17/25] Marvell/Library: ComPhyLib: Switch library to use MARVELL_BOARD_DESC Marcin Wojtas
2018-06-18 16:20 ` Leif Lindholm
2018-06-17 20:11 ` [platforms: PATCH v2 18/25] Marvell/Armada7k8k: Extend ArmadaSoCDescLib with MDIO information Marcin Wojtas
2018-06-18 16:23 ` Leif Lindholm
2018-06-18 16:27 ` Marcin Wojtas
2018-06-18 17:16 ` Leif Lindholm
2018-06-17 20:11 ` [platforms: PATCH v2 19/25] Marvell/Drivers: MvBoardDesc: Extend protocol with MDIO support Marcin Wojtas
2018-06-18 16:44 ` Leif Lindholm
2018-06-17 20:12 ` [platforms: PATCH v2 20/25] Marvell/Drivers: MvMdioDxe: Enable 64bit addressing Marcin Wojtas
2018-06-17 20:12 ` [platforms: PATCH v2 21/25] Marvell/Drivers: MvMdioDxe: Switch driver to use MARVELL_BOARD_DESC Marcin Wojtas
2018-06-17 20:12 ` [platforms: PATCH v2 22/25] Marvell/Armada7k8k: Extend ArmadaSoCDescLib with I2C information Marcin Wojtas
2018-06-18 16:45 ` Leif Lindholm
2018-06-17 20:12 ` [platforms: PATCH v2 23/25] Marvell/Drivers: MvBoardDesc: Extend protocol with I2C support Marcin Wojtas
2018-06-18 16:47 ` Leif Lindholm
2018-06-17 20:12 ` [platforms: PATCH v2 24/25] Marvell/Drivers: MvI2cDxe: Switch driver to use MARVELL_BOARD_DESC Marcin Wojtas
2018-06-18 16:48 ` Leif Lindholm
2018-06-17 20:12 ` [platforms: PATCH v2 25/25] Marvell/Drivers: MvPhyDxe: Remove MvHwDescLib.h dependency Marcin Wojtas
2018-06-18 16:50 ` Leif Lindholm
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180618155309.lgiiradea4cnkcqn@bivouac.eciton.net \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox