From: Leif Lindholm <leif.lindholm@linaro.org>
To: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: "edk2-devel@lists.01.org" <edk2-devel@lists.01.org>
Subject: Re: [PATCH edk2-platforms 1/2] Silicon/SynQuacer: add preliminary support for PCIe MMIO32 translation
Date: Tue, 26 Jun 2018 15:34:26 +0100 [thread overview]
Message-ID: <20180626143426.b2bsv7hdjkjv7znd@bivouac.eciton.net> (raw)
In-Reply-To: <CAKv+Gu-dAN0Ozu-vWSJo5LDjcy6hfKQxYhiHFaetN_0_Dtc1uA@mail.gmail.com>
On Tue, Jun 26, 2018 at 04:25:46PM +0200, Ard Biesheuvel wrote:
> On 26 June 2018 at 16:24, Leif Lindholm <leif.lindholm@linaro.org> wrote:
> > On Tue, Jun 26, 2018 at 12:44:23PM +0200, Ard Biesheuvel wrote:
> >> Add the basic support for enabling PCIe MMIO32 translation on the
> >> SynQuacer, without actually enabling it just yet. It would allow us
> >> to increase the bus range to 255 MB [from 127 MB] and the MMIO32
> >> range to 512 MB or more [from 128 MB], but it is more likely to
> >> cause compatibility issues with code ported from the PC platform.
> >>
> >> Contributed-under: TianoCore Contribution Agreement 1.1
> >> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
> >> ---
> >> Silicon/Socionext/SynQuacer/AcpiTables/AcpiSsdtRootPci.asl | 8 ++++----
> >> Silicon/Socionext/SynQuacer/Include/Platform/Pcie.h | 2 ++
> >> Silicon/Socionext/SynQuacer/Library/SynQuacerPciHostBridgeLib/SynQuacerPciHostBridgeLib.c | 6 ++++--
> >> Silicon/Socionext/SynQuacer/Library/SynQuacerPciHostBridgeLib/SynQuacerPciHostBridgeLibConstructor.c | 2 +-
> >> 4 files changed, 11 insertions(+), 7 deletions(-)
> >>
> >> diff --git a/Silicon/Socionext/SynQuacer/AcpiTables/AcpiSsdtRootPci.asl b/Silicon/Socionext/SynQuacer/AcpiTables/AcpiSsdtRootPci.asl
> >> index 51e9d0b22c3d..77d4763d1a85 100644
> >> --- a/Silicon/Socionext/SynQuacer/AcpiTables/AcpiSsdtRootPci.asl
> >> +++ b/Silicon/Socionext/SynQuacer/AcpiTables/AcpiSsdtRootPci.asl
> >> @@ -86,14 +86,14 @@ DefinitionBlock ("SsdtPci.aml", "SSDT", 1, "SNI", "SYNQUACR",
> >> SYNQUACER_PCI_SEG0_BUSNUM_RANGE // RangeLength - # of Busses
> >> )
> >>
> >> - DWordMemory ( // 32-bit BAR Windows
> >> + QWordMemory ( // 32-bit BAR Windows
> >> ResourceProducer, PosDecode,
> >> MinFixed, MaxFixed,
> >> Cacheable, ReadWrite,
> >> 0x00000000, // Granularity
> >> SYNQUACER_PCI_SEG0_MMIO32_MIN, // Min Base Address
> >> SYNQUACER_PCI_SEG0_MMIO32_MAX, // Max Base Address
> >> - 0x00000000, // Translate
> >> + SYNQUACER_PCI_SEG0_MMIO32_XLATE, // Translate
> >> SYNQUACER_PCI_SEG0_MMIO32_SIZE // Length
> >> )
> >>
> >> @@ -224,14 +224,14 @@ DefinitionBlock ("SsdtPci.aml", "SSDT", 1, "SNI", "SYNQUACR",
> >> SYNQUACER_PCI_SEG1_BUSNUM_RANGE // RangeLength - # of Busses
> >> )
> >>
> >> - DWordMemory ( // 32-bit BAR Windows
> >> + QWordMemory ( // 32-bit BAR Windows
> >> ResourceProducer, PosDecode,
> >> MinFixed, MaxFixed,
> >> Cacheable, ReadWrite,
> >> 0x00000000, // Granularity
> >> SYNQUACER_PCI_SEG1_MMIO32_MIN, // Min Base Address
> >> SYNQUACER_PCI_SEG1_MMIO32_MAX, // Max Base Address
> >> - 0x00000000, // Translate
> >> + SYNQUACER_PCI_SEG1_MMIO32_XLATE, // Translate
> >> SYNQUACER_PCI_SEG1_MMIO32_SIZE // Length
> >> )
> >>
> >> diff --git a/Silicon/Socionext/SynQuacer/Include/Platform/Pcie.h b/Silicon/Socionext/SynQuacer/Include/Platform/Pcie.h
> >> index 950cece13e81..798f59db2a94 100644
> >> --- a/Silicon/Socionext/SynQuacer/Include/Platform/Pcie.h
> >> +++ b/Silicon/Socionext/SynQuacer/Include/Platform/Pcie.h
> >> @@ -34,6 +34,7 @@
> >> #define SYNQUACER_PCI_SEG0_MMIO32_MIN 0x68000000
> >> #define SYNQUACER_PCI_SEG0_MMIO32_MAX 0x6fffffff
> >> #define SYNQUACER_PCI_SEG0_MMIO32_SIZE 0x08000000
> >> +#define SYNQUACER_PCI_SEG0_MMIO32_XLATE 0x0
> >>
> >> #define SYNQUACER_PCI_SEG0_MMIO64_MIN 0x3e00000000
> >> #define SYNQUACER_PCI_SEG0_MMIO64_MAX 0x3effffffff
> >> @@ -57,6 +58,7 @@
> >> #define SYNQUACER_PCI_SEG1_MMIO32_MIN 0x78000000
> >> #define SYNQUACER_PCI_SEG1_MMIO32_MAX 0x7fffffff
> >> #define SYNQUACER_PCI_SEG1_MMIO32_SIZE 0x08000000
> >> +#define SYNQUACER_PCI_SEG1_MMIO32_XLATE 0x0
> >>
> >> #define SYNQUACER_PCI_SEG1_MMIO64_MIN 0x3f00000000
> >> #define SYNQUACER_PCI_SEG1_MMIO64_MAX 0x3fffffffff
> >> diff --git a/Silicon/Socionext/SynQuacer/Library/SynQuacerPciHostBridgeLib/SynQuacerPciHostBridgeLib.c b/Silicon/Socionext/SynQuacer/Library/SynQuacerPciHostBridgeLib/SynQuacerPciHostBridgeLib.c
> >> index 341939876bd3..7c096f0801dd 100644
> >> --- a/Silicon/Socionext/SynQuacer/Library/SynQuacerPciHostBridgeLib/SynQuacerPciHostBridgeLib.c
> >> +++ b/Silicon/Socionext/SynQuacer/Library/SynQuacerPciHostBridgeLib/SynQuacerPciHostBridgeLib.c
> >> @@ -107,7 +107,8 @@ PCI_ROOT_BRIDGE mPciRootBridges[] = {
> >> SYNQUACER_PCI_SEG0_PORTIO_MAX,
> >> MAX_UINT64 - SYNQUACER_PCI_SEG0_PORTIO_OFFSET + 1 }, // Io
> >> { SYNQUACER_PCI_SEG0_MMIO32_MIN,
> >> - SYNQUACER_PCI_SEG0_MMIO32_MAX }, // Mem
> >> + SYNQUACER_PCI_SEG0_MMIO32_MAX,
> >> + MAX_UINT64 - SYNQUACER_PCI_SEG0_MMIO32_XLATE + 1 }, // Mem
> >
> > So, this had me scratching my head for a second.
> > I may get pickier about requring explicitly initializing the
> > Translation field in future, but for this patch:
> > Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
> >
>
> That field did not exist yet when this code was merged. It was
> introduced by Heyi's recent PCI patches.
Ah, fair enough.
Slightly unfortunate C just silently lets that through though...
/
Leif
> >> { SYNQUACER_PCI_SEG0_MMIO64_MIN,
> >> SYNQUACER_PCI_SEG0_MMIO64_MAX }, // MemAbove4G
> >> { MAX_UINT64, 0x0 }, // PMem
> >> @@ -127,7 +128,8 @@ PCI_ROOT_BRIDGE mPciRootBridges[] = {
> >> SYNQUACER_PCI_SEG1_PORTIO_MAX,
> >> MAX_UINT64 - SYNQUACER_PCI_SEG1_PORTIO_OFFSET + 1 }, // Io
> >> { SYNQUACER_PCI_SEG1_MMIO32_MIN,
> >> - SYNQUACER_PCI_SEG1_MMIO32_MAX }, // Mem
> >> + SYNQUACER_PCI_SEG1_MMIO32_MAX,
> >> + MAX_UINT64 - SYNQUACER_PCI_SEG1_MMIO32_XLATE + 1 }, // Mem
> >> { SYNQUACER_PCI_SEG1_MMIO64_MIN,
> >> SYNQUACER_PCI_SEG1_MMIO64_MAX }, // MemAbove4G
> >> { MAX_UINT64, 0x0 }, // PMem
> >> diff --git a/Silicon/Socionext/SynQuacer/Library/SynQuacerPciHostBridgeLib/SynQuacerPciHostBridgeLibConstructor.c b/Silicon/Socionext/SynQuacer/Library/SynQuacerPciHostBridgeLib/SynQuacerPciHostBridgeLibConstructor.c
> >> index 227f9a725ce8..75a663e974e1 100644
> >> --- a/Silicon/Socionext/SynQuacer/Library/SynQuacerPciHostBridgeLib/SynQuacerPciHostBridgeLibConstructor.c
> >> +++ b/Silicon/Socionext/SynQuacer/Library/SynQuacerPciHostBridgeLib/SynQuacerPciHostBridgeLibConstructor.c
> >> @@ -322,7 +322,7 @@ PciInitControllerPost (
> >>
> >> // Region 0: MMIO32 range
> >> ConfigureWindow (DbiBase, 0,
> >> - RootBridge->Mem.Base,
> >> + RootBridge->Mem.Base - RootBridge->Mem.Translation,
> >> RootBridge->Mem.Base,
> >> RootBridge->Mem.Limit - RootBridge->Mem.Base + 1,
> >> IATU_REGION_CTRL_1_OFF_OUTBOUND_0_TYPE_MEM |
> >> --
> >> 2.17.1
> >>
next prev parent reply other threads:[~2018-06-26 14:34 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-06-26 10:44 [PATCH edk2-platforms 0/2] SynQuacer: enable MMIO translation Ard Biesheuvel
2018-06-26 10:44 ` [PATCH edk2-platforms 1/2] Silicon/SynQuacer: add preliminary support for PCIe MMIO32 translation Ard Biesheuvel
2018-06-26 14:24 ` Leif Lindholm
2018-06-26 14:25 ` Ard Biesheuvel
2018-06-26 14:34 ` Leif Lindholm [this message]
2018-06-26 18:21 ` Ard Biesheuvel
2018-06-26 10:44 ` [PATCH edk2-platforms 2/2] Silicon/Socionext/SynQuacer: use single translated MMIO window for PCI1 Ard Biesheuvel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180626143426.b2bsv7hdjkjv7znd@bivouac.eciton.net \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox