From: Hao Wu <hao.a.wu@intel.com>
To: edk2-devel@lists.01.org
Cc: Hao Wu <hao.a.wu@intel.com>, Jiewen Yao <jiewen.yao@intel.com>
Subject: [PATCH edk2-platforms\devel-MinPlatform 4/4] AdvancedFeaturePkg/Ipmi: Delete IpmiEx.h
Date: Mon, 9 Jul 2018 11:09:19 +0800 [thread overview]
Message-ID: <20180709030919.8464-5-hao.a.wu@intel.com> (raw)
In-Reply-To: <20180709030919.8464-1-hao.a.wu@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
---
Platform/Intel/AdvancedFeaturePkg/Ipmi/Include/IpmiEx.h | 296 --------------------
1 file changed, 296 deletions(-)
diff --git a/Platform/Intel/AdvancedFeaturePkg/Ipmi/Include/IpmiEx.h b/Platform/Intel/AdvancedFeaturePkg/Ipmi/Include/IpmiEx.h
deleted file mode 100644
index 788ad40890..0000000000
--- a/Platform/Intel/AdvancedFeaturePkg/Ipmi/Include/IpmiEx.h
+++ /dev/null
@@ -1,296 +0,0 @@
-/** @file
- IPMI 2.0 definitions from the IPMI Specification Version 2.0, Revision 1.1.
-
- See IPMI specification, Appendix G, Command Assignments
- and Appendix H, Sub-function Assignments.
-
- Copyright (c) 1999 - 2015, Intel Corporation. All rights reserved.<BR>
- This program and the accompanying materials
- are licensed and made available under the terms and conditions of the BSD License
- which accompanies this distribution. The full text of the license may be found at
- http://opensource.org/licenses/bsd-license.php
-
- THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
- WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-**/
-
-#ifndef _IPMI_EX_H_
-#define _IPMI_EX_H_
-
-#pragma pack(1)
-
-//
-// Generic completion Codes
-//
-#define IPMI_COMP_CODE_NORMAL 0x00
-#define IPMI_COMP_CODE_NODE_BUSY 0xC0
-#define IPMI_COMP_CODE_TIMEOUT 0xC3
-#define IPMI_COMP_CODE_OUT_OF_SPACE 0xC4
-#define IPMI_COMP_CODE_OUT_OF_RANGE 0xC9
-#define IPMI_COMP_CODE_CMD_RESP_NOT_PROVIDED 0xCE
-#define IPMI_COMP_CODE_FAIL_DUP_REQUEST 0xCF
-#define IPMI_COMP_CODE_SDR_REP_IN_UPDATE_MODE 0xD0
-#define IPMI_COMP_CODE_DEV_IN_FW_UPDATE_MODE 0xD1
-#define IPMI_COMP_CODE_BMC_INIT_IN_PROGRESS 0xD2
-#define IPMI_COMP_CODE_UNSPECIFIED 0xFF
-
-//
-// Watchdog timer
-//
-#define IPMI_WATCHDOG_TIMER_BIOS_FRB2 0x1
-#define IPMI_WATCHDOG_TIMER_BIOS_POST 0x2
-#define IPMI_WATCHDOG_TIMER_OS_LOADER 0x3
-#define IPMI_WATCHDOG_TIMER_SMS 0x4
-
-#define IPMI_WATCHDOG_TIMER_ACTION_NO_ACTION 0x0
-#define IPMI_WATCHDOG_TIMER_ACTION_HARD_RESET 0x1
-#define IPMI_WATCHDOG_TIMER_ACTION_POWER_DONW 0x2
-#define IPMI_WATCHDOG_TIMER_ACTION_POWER_CYCLE 0x3
-
-//
-// Device and Messaging
-//
-
-typedef struct {
- UINT8 EnableReceiveMessageQueueInterrupt : 1;
- UINT8 EnableEventMessageBufferFullInterrupt : 1;
- UINT8 EnableEventMessageBuffer : 1;
- UINT8 EnableSystemEventLogging : 1;
- UINT8 Reserved : 1;
- UINT8 Oem0Enable : 1;
- UINT8 Oem1Enable : 1;
- UINT8 Oem2Enable : 1;
-} IPMI_SET_BMC_GLOBAL_ENABLES_REQUEST;
-
-typedef struct {
- UINT8 CompletionCode;
- UINT8 ReceiveMessageQueueInterrupt : 1;
- UINT8 EventMessageBufferFullInterrupt : 1;
- UINT8 EventMessageBuffer : 1;
- UINT8 SystemEventLogging : 1;
- UINT8 Reserved : 1;
- UINT8 Oem0Enable : 1;
- UINT8 Oem1Enable : 1;
- UINT8 Oem2Enable : 1;
-} IPMI_GET_BMC_GLOBAL_ENABLES_RESPONSE;
-
-typedef struct {
- UINT8 ClearReceiveMessageQueue : 1;
- UINT8 ClearEventMessageBuffer : 1;
- UINT8 Reserved0 : 1;
- UINT8 ClearWatchdogPerTimeoutInterruptFlag : 1;
- UINT8 Reserved : 1;
- UINT8 ClearOem0Enable : 1;
- UINT8 ClearOem1Enable : 1;
- UINT8 ClearOem2Enable : 1;
-} IPMI_CLEAR_MESSAGE_FLAGS_REQUEST;
-
-typedef struct {
- UINT8 CompletionCode;
- UINT8 ReceiveMessageAvailable : 1;
- UINT8 EventMessageBufferFull : 1;
- UINT8 Reserved0 : 1;
- UINT8 WatchdogPerTimeoutInterruptOccurred : 1;
- UINT8 Reserved : 1;
- UINT8 Oem0DataAvailable : 1;
- UINT8 Oem1DataAvailable : 1;
- UINT8 Oem2DataAvailable : 1;
-} IPMI_GET_MESSAGE_FLAGS_RESPONSE;
-
-typedef struct {
- UINT8 CompletionCode;
- UINT8 ChannelNumber : 4;
- UINT8 InferredPrivilegeLevel : 4;
- UINT8 MessageData[];
-} IPMI_GET_MESSAGE_RESPONSE;
-
-typedef struct {
- UINT8 CompletionCode;
- UINT8 ChannelNumber : 4;
- UINT8 Authentication : 1;
- UINT8 Encryption : 1;
- UINT8 Tracking : 2;
- UINT8 MessageData[];
-} IPMI_SEND_MESSAGE_REQUEST;
-
-typedef struct {
- UINT8 CompletionCode;
- UINT8 ResponseData[];
-} IPMI_SEND_MESSAGE_RESPONSE;
-
-//
-// SOL
-//
-
-typedef struct {
- UINT8 SessionState : 4;
- UINT8 Reserved : 4;
- UINT8 PayloadInstance;
- UINT8 FormatVersionMajor; // 1
- UINT8 FormatVersionMinor; // 0
-} IPMI_SOL_ACTIVATING_REQUEST;
-
-typedef struct {
- UINT8 ChannelNumber : 4;
- UINT8 Reserved : 4;
- UINT8 ParameterSelector;
- UINT8 ParameterData[1];
-} IPMI_SET_SOL_CONFIGURATION_PARAMETERS_REQUEST;
-
-typedef struct {
- UINT8 ChannelNumber : 4;
- UINT8 Reserved : 3;
- UINT8 GetParameter : 1;
- UINT8 ParameterSelector;
- UINT8 SetSelector;
- UINT8 BlockSelector;
-} IPMI_GET_SOL_CONFIGURATION_PARAMETERS_REQUEST;
-
-typedef struct {
- UINT8 CompletionCode;
- UINT8 ParameterRevision;
- UINT8 ParameterData[1];
-} IPMI_GET_SOL_CONFIGURATION_PARAMETERS_RESPONSE;
-
-#define IPMI_SOL_CONFIGURATION_PARAMETER_SET_IN_PROGRESS 0
-#define IPMI_SOL_CONFIGURATION_PARAMETER_SOL_ENABLE 1
-#define IPMI_SOL_CONFIGURATION_PARAMETER_SOL_AUTHENTICATION 2
-#define IPMI_SOL_CONFIGURATION_PARAMETER_SOL_CHARACTER_PARAM 3
-#define IPMI_SOL_CONFIGURATION_PARAMETER_SOL_RETRY 4
-#define IPMI_SOL_CONFIGURATION_PARAMETER_SOL_NV_BIT_RATE 5
-#define IPMI_SOL_CONFIGURATION_PARAMETER_SOL_VOLATILE_BIT_RATE 6
-#define IPMI_SOL_CONFIGURATION_PARAMETER_SOL_PAYLOAD_CHANNEL 7
-#define IPMI_SOL_CONFIGURATION_PARAMETER_SOL_PAYLOAD_PORT 8
-
-//
-// Chasis
-//
-
-typedef struct {
- UINT8 CompletionCode;
- UINT8 CapabilitiesFlags;
- UINT8 ChassisFruInfoDeviceAddress;
- UINT8 ChassisSDRDeviceAddress;
- UINT8 ChassisSELDeviceAddress;
- UINT8 ChassisSystemManagementDeviceAddress;
- UINT8 ChassisBridgeDeviceAddress;
-} IPMI_GET_CHASSIS_CAPABILITIES_RESPONSE;
-
-typedef struct {
- UINT8 CompletionCode;
- UINT8 CurrentPowerState;
- UINT8 LastPowerEvent;
- UINT8 MiscChassisState;
- UINT8 FrontPanelButtonCapabilities;
-} IPMI_GET_CHASSIS_STATUS_RESPONSE;
-
-typedef struct {
- UINT8 ChassisControl:4;
- UINT8 Reserved:4;
-} IPMI_CHASSIS_CONTROL_REQUEST;
-
-typedef struct {
- UINT8 PowerRestorePolicy:3;
- UINT8 Reserved:5;
-} IPMI_SET_POWER_RESTORE_POLICY_REQUEST;
-
-typedef struct {
- UINT8 CompletionCode;
- UINT8 PowerRestorePolicySupport;
-} IPMI_SET_POWER_RESTORE_POLICY_RESPONSE;
-
-//
-// FRU
-//
-
-typedef struct {
- UINT8 DeviceId;
-} IPMI_GET_FRU_INVENTORY_AREA_INFO_REQUEST;
-
-typedef struct {
- UINT8 CompletionCode;
- UINT16 InventoryAreaSize;
- UINT8 AccessType;
-} IPMI_GET_FRU_INVENTORY_AREA_INFO_RESPONSE;
-
-typedef struct {
- UINT8 DeviceId;
- UINT16 InventoryOffset;
- UINT8 CountToRead;
-} IPMI_READ_FRU_DATA_REQUEST;
-
-typedef struct {
- UINT8 CompletionCode;
- UINT8 CountReturned;
- UINT8 Data[];
-} IPMI_READ_FRU_DATA_RESPONSE;
-
-typedef struct {
- UINT8 DeviceId;
- UINT16 InventoryOffset;
- UINT8 Data[];
-} IPMI_WRITE_FRU_DATA_REQUEST;
-
-typedef struct {
- UINT8 CompletionCode;
- UINT8 CountWritten;
-} IPMI_WRITE_FRU_DATA_RESPONSE;
-
-//
-// SEL
-//
-
-typedef struct {
- UINT8 CompletionCode;
- UINT16 NextSelRecord;
- UINT8 RecordData[];
-} IPMI_GET_SEL_ENTRY_RESPONSE;
-
-typedef struct {
- UINT8 RecordData[16];
-} IPMI_ADD_SEL_ENTRY_REQUEST;
-
-typedef struct {
- UINT8 CompletionCode;
- UINT16 RecordId;
-} IPMI_ADD_SEL_ENTRY_RESPONSE;
-
-typedef struct {
- UINT16 ReservationId;
- UINT16 RecordId;
- UINT8 OffsetIntoRecord;
- UINT8 InProgress;
- UINT8 RecordData[];
-} IPMI_PARTIAL_ADD_SEL_ENTRY_REQUEST;
-
-typedef struct {
- UINT8 CompletionCode;
- UINT16 RecordId;
-} IPMI_PARTIAL_ADD_SEL_ENTRY_RESPONSE;
-
-typedef struct {
- UINT8 CompletionCode;
- UINT8 ErasureProgress;
-} IPMI_CLEAR_SEL_RESPONSE;
-
-typedef struct {
- UINT8 CompletionCode;
- UINT32 Timestamp;
-} IPMI_GET_SEL_TIME_RESPONSE;
-
-typedef struct {
- UINT32 Timestamp;
-} IPMI_SET_SEL_TIME_REQUEST;
-
-//
-// SDR
-//
-typedef struct {
- UINT8 CompletionCode;
- UINT16 RecordId;
- UINT8 RecordData[];
-} IPMI_GET_SDR_RESPONSE;
-
-#pragma pack()
-
-#endif
\ No newline at end of file
--
2.12.0.windows.1
next prev parent reply other threads:[~2018-07-09 3:09 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-07-09 3:09 [PATCH edk2-platforms\devel-MinPlatform 0/4] IPMI codes update Hao Wu
2018-07-09 3:09 ` [PATCH edk2-platforms\devel-MinPlatform 1/4] AdvancedFeaturePkg/IpmiFru.c: Use 'DEBUG_' prefix for debug macros Hao Wu
2018-07-09 3:09 ` [PATCH edk2-platforms\devel-MinPlatform 2/4] AdvancedFeaturePkg/Ipmi: Update codes for header changes in MdePkg Hao Wu
2018-07-09 3:09 ` [PATCH edk2-platforms\devel-MinPlatform 3/4] PurleyOpenBoardPkg Ipmi: " Hao Wu
2018-07-09 3:09 ` Hao Wu [this message]
2018-07-09 3:31 ` [PATCH edk2-platforms\devel-MinPlatform 0/4] IPMI codes update Yao, Jiewen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180709030919.8464-5-hao.a.wu@intel.com \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox