* [PATCH edk2-platforms v1 00/13] Switching to generic PciHostBridge driver
@ 2018-07-20 8:02 Ming Huang
2018-07-20 8:02 ` [PATCH edk2-platforms v1 01/13] Hisilicon: Enable WARN and INFO debug message Ming Huang
` (12 more replies)
0 siblings, 13 replies; 16+ messages in thread
From: Ming Huang @ 2018-07-20 8:02 UTC (permalink / raw)
To: leif.lindholm, linaro-uefi, edk2-devel, graeme.gregory
Cc: ard.biesheuvel, guoheyi, wanghuiqiang, huangming23, zhangjinsong2,
huangdaode, john.garry, Ming Huang
The major features of this patchset include:
1 switching to generic PciHostBridge driver;
2 Change DEBUG log level;
Code can also be found in github: https://github.com/hisilicon/OpenPlatformPkg.git
branch: pcihostbridge-v1
Heyi Guo (10):
Hisilicon: Enable WARN and INFO debug message
Hisilicon/D05/PlatformPciLib: fix misuse of macro
Hisilicon/Pci: Move PciPlatform to common directory
Hisilicon/PlatformPciLib: add segment for each root bridge
Hisilicon: add PciHostBridgeLib
Hisilicon: add PciCpuIo2Dxe
Hisilicon: add PciSegmentLib for Hi161x
Hisilicon/D0x: Switch to generic PciHostBridge driver
Hisilicon: remove platform specific PciHostBridge
Hisilicon/PlatformPciLib: clear redundant felds in RESOURCE_APPETURE
Ming Huang (3):
Hisilicon/Pci: Add two api for PciPlatform driver
Hisilicon/Pci: move ATU configuration to PciPlatformLib
Hisilicon/Pci: move EnlargeAtuConfig0() to PciPlatformLib
Platform/Hisilicon/D03/D03.dsc | 13 +-
Platform/Hisilicon/D03/D03.fdf | 5 +-
.../D03/Drivers/PciPlatform/PciPlatform.h | 180 --
.../Library/PlatformPciLib/PlatformPciLib.c | 24 +-
Platform/Hisilicon/D05/D05.dsc | 13 +-
Platform/Hisilicon/D05/D05.fdf | 5 +-
.../Library/PlatformPciLib/PlatformPciLib.c | 66 +-
.../PciHostBridgeLib/PciHostBridgeLib.c | 304 +++
.../PciHostBridgeLib/PciHostBridgeLib.inf | 51 +
.../Drivers/ArmPciCpuIo2Dxe/ArmPciCpuIo2Dxe.c | 557 ++++
.../ArmPciCpuIo2Dxe/ArmPciCpuIo2Dxe.inf | 48 +
.../Drivers/PciHostBridgeDxe/PciHostBridge.c | 1659 ------------
.../Drivers/PciHostBridgeDxe/PciHostBridge.h | 528 ----
.../PciHostBridgeDxe/PciHostBridgeDxe.inf | 74 -
.../PciHostBridgeDxe/PciRootBridgeIo.c | 2405 -----------------
.../Drivers/PciPlatform/PciPlatform.c | 45 +
.../Drivers/PciPlatform/PciPlatform.inf | 1 +
.../Hi161xPciPlatformLib.c | 384 +++
.../Hi161xPciPlatformLib.inf | 42 +
.../Hi161xPciSegmentLib.inf | 36 +
.../Hi161xPciSegmentLib/PciSegmentLib.c | 1503 ++++++++++
Silicon/Hisilicon/Hisilicon.dsc.inc | 8 +-
.../Include/Library/PlatformPciLib.h | 3 +-
23 files changed, 3037 insertions(+), 4917 deletions(-)
delete mode 100644 Platform/Hisilicon/D03/Drivers/PciPlatform/PciPlatform.h
create mode 100644 Platform/Hisilicon/Library/PciHostBridgeLib/PciHostBridgeLib.c
create mode 100644 Platform/Hisilicon/Library/PciHostBridgeLib/PciHostBridgeLib.inf
create mode 100644 Silicon/Hisilicon/Drivers/ArmPciCpuIo2Dxe/ArmPciCpuIo2Dxe.c
create mode 100644 Silicon/Hisilicon/Drivers/ArmPciCpuIo2Dxe/ArmPciCpuIo2Dxe.inf
delete mode 100644 Silicon/Hisilicon/Drivers/PciHostBridgeDxe/PciHostBridge.c
delete mode 100644 Silicon/Hisilicon/Drivers/PciHostBridgeDxe/PciHostBridge.h
delete mode 100644 Silicon/Hisilicon/Drivers/PciHostBridgeDxe/PciHostBridgeDxe.inf
delete mode 100644 Silicon/Hisilicon/Drivers/PciHostBridgeDxe/PciRootBridgeIo.c
rename {Platform/Hisilicon/D03 => Silicon/Hisilicon}/Drivers/PciPlatform/PciPlatform.c (89%)
rename {Platform/Hisilicon/D03 => Silicon/Hisilicon}/Drivers/PciPlatform/PciPlatform.inf (94%)
create mode 100644 Silicon/Hisilicon/Hi1610/Library/Hi161xPciPlatformLib/Hi161xPciPlatformLib.c
create mode 100644 Silicon/Hisilicon/Hi1610/Library/Hi161xPciPlatformLib/Hi161xPciPlatformLib.inf
create mode 100644 Silicon/Hisilicon/Hi1610/Library/Hi161xPciSegmentLib/Hi161xPciSegmentLib.inf
create mode 100644 Silicon/Hisilicon/Hi1610/Library/Hi161xPciSegmentLib/PciSegmentLib.c
--
2.17.0
^ permalink raw reply [flat|nested] 16+ messages in thread
* [PATCH edk2-platforms v1 01/13] Hisilicon: Enable WARN and INFO debug message
2018-07-20 8:02 [PATCH edk2-platforms v1 00/13] Switching to generic PciHostBridge driver Ming Huang
@ 2018-07-20 8:02 ` Ming Huang
2018-07-20 8:02 ` [PATCH edk2-platforms v1 02/13] Hisilicon/D05/PlatformPciLib: fix misuse of macro Ming Huang
` (11 subsequent siblings)
12 siblings, 0 replies; 16+ messages in thread
From: Ming Huang @ 2018-07-20 8:02 UTC (permalink / raw)
To: leif.lindholm, linaro-uefi, edk2-devel, graeme.gregory
Cc: ard.biesheuvel, guoheyi, wanghuiqiang, huangming23, zhangjinsong2,
huangdaode, john.garry, Heyi Guo, Michael D Kinney,
Haojian Zhuang
From: Heyi Guo <heyi.guo@linaro.org>
INFO and WARN messages are useful when we are debugging, something
like PCI enumeration process, and more debug messages should not
impact much for they will only be displayed in DEBUG version, not
RELEASE one.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Heyi Guo <heyi.guo@linaro.org>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Haojian Zhuang <haojian.zhuang@linaro.org>
---
Silicon/Hisilicon/Hisilicon.dsc.inc | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/Silicon/Hisilicon/Hisilicon.dsc.inc b/Silicon/Hisilicon/Hisilicon.dsc.inc
index 4fba78045d..20ff1ec25b 100644
--- a/Silicon/Hisilicon/Hisilicon.dsc.inc
+++ b/Silicon/Hisilicon/Hisilicon.dsc.inc
@@ -294,7 +294,7 @@
# DEBUG_EVENT 0x00080000 // Event messages
# DEBUG_ERROR 0x80000000 // Error
- gEfiMdePkgTokenSpaceGuid.PcdDebugPrintErrorLevel|0x80000004
+ gEfiMdePkgTokenSpaceGuid.PcdDebugPrintErrorLevel|0x80000046
gEfiMdePkgTokenSpaceGuid.PcdReportStatusCodePropertyMask|0x06
#
--
2.17.0
^ permalink raw reply related [flat|nested] 16+ messages in thread
* [PATCH edk2-platforms v1 02/13] Hisilicon/D05/PlatformPciLib: fix misuse of macro
2018-07-20 8:02 [PATCH edk2-platforms v1 00/13] Switching to generic PciHostBridge driver Ming Huang
2018-07-20 8:02 ` [PATCH edk2-platforms v1 01/13] Hisilicon: Enable WARN and INFO debug message Ming Huang
@ 2018-07-20 8:02 ` Ming Huang
2018-07-20 8:02 ` [PATCH edk2-platforms v1 03/13] Hisilicon/Pci: Move PciPlatform to common directory Ming Huang
` (10 subsequent siblings)
12 siblings, 0 replies; 16+ messages in thread
From: Ming Huang @ 2018-07-20 8:02 UTC (permalink / raw)
To: leif.lindholm, linaro-uefi, edk2-devel, graeme.gregory
Cc: ard.biesheuvel, guoheyi, wanghuiqiang, huangming23, zhangjinsong2,
huangdaode, john.garry, Heyi Guo, Michael D Kinney
From: Heyi Guo <heyi.guo@linaro.org>
Each PCI root bridge has its own macro definitions for its resource
aperture, so that one root bridge should not use macro definitions of
other root bridges.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Heyi Guo <heyi.guo@linaro.org>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
---
Platform/Hisilicon/D05/Library/PlatformPciLib/PlatformPciLib.c | 18 +++++++++---------
1 file changed, 9 insertions(+), 9 deletions(-)
diff --git a/Platform/Hisilicon/D05/Library/PlatformPciLib/PlatformPciLib.c b/Platform/Hisilicon/D05/Library/PlatformPciLib/PlatformPciLib.c
index ed6c4ac321..c0b756ccfb 100644
--- a/Platform/Hisilicon/D05/Library/PlatformPciLib/PlatformPciLib.c
+++ b/Platform/Hisilicon/D05/Library/PlatformPciLib/PlatformPciLib.c
@@ -159,7 +159,7 @@ PCI_ROOT_BRIDGE_RESOURCE_APPETURE mResAppeture[PCIE_MAX_HOSTBRIDGE][PCIE_MAX_RO
(PCI_HB1RB0_ECAM_BASE), //MemBase
(PCI_HB1RB0_CPUMEMREGIONBASE + PCI_HB1RB0_PCIREGION_SIZE - 1), //MemLimit
PCI_HB1RB0_IO_BASE, //IoBase
- (PCI_HB0RB0_CPUIOREGIONBASE + PCI_HB0RB0_IO_SIZE - 1), //IoLimit
+ (PCI_HB1RB0_CPUIOREGIONBASE + PCI_HB1RB0_IO_SIZE - 1), //IoLimit
PCI_HB1RB0_CPUMEMREGIONBASE, //CpuMemRegionBase
PCI_HB1RB0_CPUIOREGIONBASE, //CpuIoRegionBase
(PCI_HB1RB0_PCI_BASE), //RbPciBar
@@ -174,7 +174,7 @@ PCI_ROOT_BRIDGE_RESOURCE_APPETURE mResAppeture[PCIE_MAX_HOSTBRIDGE][PCIE_MAX_RO
(PCI_HB1RB1_ECAM_BASE), //MemBase
(PCI_HB1RB1_CPUMEMREGIONBASE + PCI_HB1RB1_PCIREGION_SIZE - 1), //MemLimit
PCI_HB1RB1_IO_BASE, //IoBase
- (PCI_HB0RB1_CPUIOREGIONBASE + PCI_HB0RB0_IO_SIZE - 1), //IoLimit
+ (PCI_HB1RB1_CPUIOREGIONBASE + PCI_HB1RB1_IO_SIZE - 1), //IoLimit
PCI_HB1RB1_CPUMEMREGIONBASE, //CpuMemRegionBase
PCI_HB1RB1_CPUIOREGIONBASE, //CpuIoRegionBase
(PCI_HB1RB1_PCI_BASE), //RbPciBar
@@ -189,7 +189,7 @@ PCI_ROOT_BRIDGE_RESOURCE_APPETURE mResAppeture[PCIE_MAX_HOSTBRIDGE][PCIE_MAX_RO
PCI_HB1RB2_CPUMEMREGIONBASE, //MemBase
PCI_HB1RB2_CPUMEMREGIONBASE + PCI_HB1RB2_PCIREGION_SIZE - 1, //MemLimit
PCI_HB1RB2_IO_BASE, //IoBase
- (PCI_HB0RB2_CPUIOREGIONBASE + PCI_HB0RB0_IO_SIZE - 1), //IoLimit
+ (PCI_HB1RB2_CPUIOREGIONBASE + PCI_HB1RB2_IO_SIZE - 1), //IoLimit
PCI_HB1RB2_CPUMEMREGIONBASE, //CpuMemRegionBase
PCI_HB1RB2_CPUIOREGIONBASE, //CpuIoRegionBase
(PCI_HB1RB2_PCI_BASE), //RbPciBar
@@ -205,7 +205,7 @@ PCI_ROOT_BRIDGE_RESOURCE_APPETURE mResAppeture[PCIE_MAX_HOSTBRIDGE][PCIE_MAX_RO
(PCI_HB1RB3_ECAM_BASE), //MemBase
(PCI_HB1RB3_CPUMEMREGIONBASE + PCI_HB1RB3_PCIREGION_SIZE - 1), //MemLimit
PCI_HB1RB3_IO_BASE, //IoBase
- (PCI_HB0RB3_CPUIOREGIONBASE + PCI_HB0RB0_IO_SIZE - 1), //IoLimit
+ (PCI_HB1RB3_CPUIOREGIONBASE + PCI_HB1RB3_IO_SIZE - 1), //IoLimit
PCI_HB1RB3_CPUMEMREGIONBASE, //CpuMemRegionBase
PCI_HB1RB3_CPUIOREGIONBASE, //CpuIoRegionBase
(PCI_HB1RB3_PCI_BASE), //RbPciBar
@@ -220,7 +220,7 @@ PCI_ROOT_BRIDGE_RESOURCE_APPETURE mResAppeture[PCIE_MAX_HOSTBRIDGE][PCIE_MAX_RO
PCI_HB1RB4_CPUMEMREGIONBASE, //MemBase
PCI_HB1RB4_CPUMEMREGIONBASE + PCI_HB1RB4_PCIREGION_SIZE - 1, //MemLimit
PCI_HB1RB4_IO_BASE, //IoBase
- (PCI_HB0RB4_CPUIOREGIONBASE + PCI_HB0RB0_IO_SIZE - 1), //IoLimit
+ (PCI_HB1RB4_CPUIOREGIONBASE + PCI_HB1RB4_IO_SIZE - 1), //IoLimit
PCI_HB1RB4_CPUMEMREGIONBASE, //CpuMemRegionBase
PCI_HB1RB4_CPUIOREGIONBASE, //CpuIoRegionBase
(PCI_HB1RB4_PCI_BASE), //RbPciBar
@@ -235,7 +235,7 @@ PCI_ROOT_BRIDGE_RESOURCE_APPETURE mResAppeture[PCIE_MAX_HOSTBRIDGE][PCIE_MAX_RO
PCI_HB1RB5_CPUMEMREGIONBASE, //MemBase
PCI_HB1RB5_CPUMEMREGIONBASE + PCI_HB1RB5_PCIREGION_SIZE - 1, //MemLimit
PCI_HB1RB5_IO_BASE, //IoBase
- (PCI_HB0RB5_CPUIOREGIONBASE + PCI_HB0RB0_IO_SIZE - 1), //IoLimit
+ (PCI_HB1RB5_CPUIOREGIONBASE + PCI_HB1RB5_IO_SIZE - 1), //IoLimit
PCI_HB1RB5_CPUMEMREGIONBASE, //CpuMemRegionBase
PCI_HB1RB5_CPUIOREGIONBASE, //CpuIoRegionBase
(PCI_HB1RB5_PCI_BASE), //RbPciBar
@@ -250,12 +250,12 @@ PCI_ROOT_BRIDGE_RESOURCE_APPETURE mResAppeture[PCIE_MAX_HOSTBRIDGE][PCIE_MAX_RO
(PCI_HB1RB6_ECAM_BASE), //MemBase
PCI_HB1RB6_CPUMEMREGIONBASE + PCI_HB1RB6_PCIREGION_SIZE - 1, //MemLimit
PCI_HB1RB6_IO_BASE, //IoBase
- (PCI_HB0RB6_CPUIOREGIONBASE + PCI_HB0RB0_IO_SIZE - 1), //IoLimit
+ (PCI_HB1RB6_CPUIOREGIONBASE + PCI_HB1RB6_IO_SIZE - 1), //IoLimit
PCI_HB1RB6_CPUMEMREGIONBASE, //CpuMemRegionBase
PCI_HB1RB6_CPUIOREGIONBASE, //CpuIoRegionBase
(PCI_HB1RB6_PCI_BASE), //RbPciBar
PCI_HB1RB6_PCIREGION_BASE, //PciRegionbase
- PCI_HB1RB0_PCIREGION_BASE + PCI_HB1RB0_PCIREGION_SIZE - 1 //PciRegionlimit
+ PCI_HB1RB6_PCIREGION_BASE + PCI_HB1RB6_PCIREGION_SIZE - 1 //PciRegionlimit
},
/* Port 7 */
@@ -266,7 +266,7 @@ PCI_ROOT_BRIDGE_RESOURCE_APPETURE mResAppeture[PCIE_MAX_HOSTBRIDGE][PCIE_MAX_RO
(PCI_HB1RB7_ECAM_BASE), //MemBase
PCI_HB1RB7_CPUMEMREGIONBASE + PCI_HB1RB7_PCIREGION_SIZE - 1, //MemLimit
PCI_HB1RB7_IO_BASE, //IoBase
- (PCI_HB0RB7_CPUIOREGIONBASE + PCI_HB0RB0_IO_SIZE - 1), //IoLimit
+ (PCI_HB1RB7_CPUIOREGIONBASE + PCI_HB1RB7_IO_SIZE - 1), //IoLimit
PCI_HB1RB7_CPUMEMREGIONBASE, //CpuMemRegionBase
PCI_HB1RB7_CPUIOREGIONBASE, //CpuIoRegionBase
(PCI_HB1RB7_PCI_BASE), //RbPciBar
--
2.17.0
^ permalink raw reply related [flat|nested] 16+ messages in thread
* [PATCH edk2-platforms v1 03/13] Hisilicon/Pci: Move PciPlatform to common directory
2018-07-20 8:02 [PATCH edk2-platforms v1 00/13] Switching to generic PciHostBridge driver Ming Huang
2018-07-20 8:02 ` [PATCH edk2-platforms v1 01/13] Hisilicon: Enable WARN and INFO debug message Ming Huang
2018-07-20 8:02 ` [PATCH edk2-platforms v1 02/13] Hisilicon/D05/PlatformPciLib: fix misuse of macro Ming Huang
@ 2018-07-20 8:02 ` Ming Huang
2018-07-20 8:02 ` [PATCH edk2-platforms v1 04/13] Hisilicon/Pci: Add two api for PciPlatform driver Ming Huang
` (9 subsequent siblings)
12 siblings, 0 replies; 16+ messages in thread
From: Ming Huang @ 2018-07-20 8:02 UTC (permalink / raw)
To: leif.lindholm, linaro-uefi, edk2-devel, graeme.gregory
Cc: ard.biesheuvel, guoheyi, wanghuiqiang, huangming23, zhangjinsong2,
huangdaode, john.garry, Heyi Guo, Ming Huang, Michael D Kinney
From: Heyi Guo <heyi.guo@linaro.org>
This is to prepare for switching to generic PciHostBridge driver, so
we move all platform specific code to platform specific drivers, not
in PciHostBridge driver.
The PciPlatform driver is design a common driver in Hisilicon,so move
this driver to Hisilion/Drvers. Remove the useless file PciPlatform.h.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Heyi Guo <heyi.guo@linaro.org>
Signed-off-by: Ming Huang <ming.huang@linaro.org>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
---
Platform/Hisilicon/D03/D03.dsc | 2 +-
Platform/Hisilicon/D03/D03.fdf | 2 +-
Platform/Hisilicon/D03/Drivers/PciPlatform/PciPlatform.h | 180 --------------------
Platform/Hisilicon/D05/D05.dsc | 2 +-
Platform/Hisilicon/D05/D05.fdf | 2 +-
{Platform/Hisilicon/D03 => Silicon/Hisilicon}/Drivers/PciPlatform/PciPlatform.c | 0
{Platform/Hisilicon/D03 => Silicon/Hisilicon}/Drivers/PciPlatform/PciPlatform.inf | 0
7 files changed, 4 insertions(+), 184 deletions(-)
diff --git a/Platform/Hisilicon/D03/D03.dsc b/Platform/Hisilicon/D03/D03.dsc
index 3fce2174fe..6ceebba4ee 100644
--- a/Platform/Hisilicon/D03/D03.dsc
+++ b/Platform/Hisilicon/D03/D03.dsc
@@ -458,7 +458,7 @@
<LibraryClasses>
NULL|Platform/Hisilicon/D03/Library/PlatformPciLib/PlatformPciLib.inf
}
- Platform/Hisilicon/D03/Drivers/PciPlatform/PciPlatform.inf
+ Silicon/Hisilicon/Drivers/PciPlatform/PciPlatform.inf
Silicon/Hisilicon/Drivers/PciHostBridgeDxe/PciHostBridgeDxe.inf {
<LibraryClasses>
DmaLib|EmbeddedPkg/Library/CoherentDmaLib/CoherentDmaLib.inf
diff --git a/Platform/Hisilicon/D03/D03.fdf b/Platform/Hisilicon/D03/D03.fdf
index 1383aa1091..264d134f98 100644
--- a/Platform/Hisilicon/D03/D03.fdf
+++ b/Platform/Hisilicon/D03/D03.fdf
@@ -263,7 +263,7 @@ READ_LOCK_STATUS = TRUE
# PCI Support
#
INF Silicon/Hisilicon/Hi1610/Drivers/PcieInit1610/PcieInitDxe.inf
- INF Platform/Hisilicon/D03/Drivers/PciPlatform/PciPlatform.inf
+ INF Silicon/Hisilicon/Drivers/PciPlatform/PciPlatform.inf
INF Silicon/Hisilicon/Drivers/PciHostBridgeDxe/PciHostBridgeDxe.inf
INF MdeModulePkg/Bus/Pci/PciBusDxe/PciBusDxe.inf
diff --git a/Platform/Hisilicon/D03/Drivers/PciPlatform/PciPlatform.h b/Platform/Hisilicon/D03/Drivers/PciPlatform/PciPlatform.h
deleted file mode 100644
index a89f7c61b6..0000000000
--- a/Platform/Hisilicon/D03/Drivers/PciPlatform/PciPlatform.h
+++ /dev/null
@@ -1,180 +0,0 @@
-/** @file
-*
-* Copyright (c) 2016, Hisilicon Limited. All rights reserved.
-* Copyright (c) 2016, Linaro Limited. All rights reserved.
-*
-* This program and the accompanying materials
-* are licensed and made available under the terms and conditions of the BSD License
-* which accompanies this distribution. The full text of the license may be found at
-* http://opensource.org/licenses/bsd-license.php
-*
-* THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
-* WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-*
-**/
-
-#ifndef PCI_PLATFORM_H_
-#define PCI_PLATFORM_H_
-
-#include <Library/DebugLib.h>
-#include <Library/BaseLib.h>
-#include <Library/UefiLib.h>
-#include <Protocol/PciPlatform.h>
-
-
-//
-// Global variables for Option ROMs
-//
-#define NULL_ROM_FILE_GUID \
- { \
- 0x00000000, 0x0000, 0x0000, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 \
- }
-
-
-typedef struct {
- EFI_GUID FileName;
- UINTN Segment;
- UINTN Bus;
- UINTN Device;
- UINTN Function;
- UINT16 VendorId;
- UINT16 DeviceId;
-} PCI_OPTION_ROM_TABLE;
-
-#define INVALID 0xBD
-
-
-typedef struct {
- EFI_HANDLE PciPlatformHandle;
- EFI_PCI_PLATFORM_PROTOCOL PciPlatform;
-} PCI_PLATFORM_PRIVATE_DATA;
-
-
-
-extern PCI_PLATFORM_PRIVATE_DATA mPciPrivateData;
-
-EFI_STATUS
-EFIAPI
-PhaseNotify (
- IN EFI_PCI_PLATFORM_PROTOCOL *This,
- IN EFI_HANDLE HostBridge,
- IN EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PHASE Phase,
- IN EFI_PCI_CHIPSET_EXECUTION_PHASE ChipsetPhase
- )
-/*++
-
-Routine Description:
-
- Perform initialization by the phase indicated.
-
-Arguments:
-
- This - Pointer to the EFI_PCI_PLATFORM_PROTOCOL instance.
- HostBridge - The associated PCI host bridge handle.
- Phase - The phase of the PCI controller enumeration.
- ChipsetPhase - Defines the execution phase of the PCI chipset driver.
-
-Returns:
-
- EFI_SUCCESS - Must return with success.
-
---*/
-;
-
-EFI_STATUS
-EFIAPI
-PlatformPrepController (
- IN EFI_PCI_PLATFORM_PROTOCOL *This,
- IN EFI_HANDLE HostBridge,
- IN EFI_HANDLE RootBridge,
- IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_PCI_ADDRESS PciAddress,
- IN EFI_PCI_CONTROLLER_RESOURCE_ALLOCATION_PHASE Phase,
- IN EFI_PCI_CHIPSET_EXECUTION_PHASE ChipsetPhase
- )
-/*++
-
-Routine Description:
-
- The PlatformPrepController() function can be used to notify the platform driver so that
- it can perform platform-specific actions. No specific actions are required.
- Several notification points are defined at this time. More synchronization points may be
- added as required in the future. The PCI bus driver calls the platform driver twice for
- every PCI controller-once before the PCI Host Bridge Resource Allocation Protocol driver
- is notified, and once after the PCI Host Bridge Resource Allocation Protocol driver has
- been notified.
- This member function may not perform any error checking on the input parameters. It also
- does not return any error codes. If this member function detects any error condition, it
- needs to handle those errors on its own because there is no way to surface any errors to
- the caller.
-
-Arguments:
-
- This - Pointer to the EFI_PCI_PLATFORM_PROTOCOL instance.
- HostBridge - The associated PCI host bridge handle.
- RootBridge - The associated PCI root bridge handle.
- PciAddress - The address of the PCI device on the PCI bus.
- Phase - The phase of the PCI controller enumeration.
- ChipsetPhase - Defines the execution phase of the PCI chipset driver.
-
-Returns:
-
- EFI_SUCCESS - The function completed successfully.
-
---*/
-;
-
-EFI_STATUS
-EFIAPI
-GetPlatformPolicy (
- IN EFI_PCI_PLATFORM_PROTOCOL *This,
- OUT EFI_PCI_PLATFORM_POLICY *PciPolicy
- )
-/*++
-
-Routine Description:
-
- Set the PciPolicy as EFI_RESERVE_ISA_IO_NO_ALIAS | EFI_RESERVE_VGA_IO_NO_ALIAS.
-
-Arguments:
-
- This - The pointer to the Protocol itself.
- PciPolicy - the returned Policy.
-
-Returns:
-
- EFI_UNSUPPORTED - Function not supported.
- EFI_INVALID_PARAMETER - Invalid PciPolicy value.
-
---*/
-;
-
-EFI_STATUS
-EFIAPI
-GetPciRom (
- IN EFI_PCI_PLATFORM_PROTOCOL *This,
- IN EFI_HANDLE PciHandle,
- OUT VOID **RomImage,
- OUT UINTN *RomSize
- )
-/*++
-
-Routine Description:
-
- Return a PCI ROM image for the onboard device represented by PciHandle.
-
-Arguments:
-
- This - Protocol instance pointer.
- PciHandle - PCI device to return the ROM image for.
- RomImage - PCI Rom Image for onboard device.
- RomSize - Size of RomImage in bytes.
-
-Returns:
-
- EFI_SUCCESS - RomImage is valid.
- EFI_NOT_FOUND - No RomImage.
-
---*/
-;
-
-#endif
diff --git a/Platform/Hisilicon/D05/D05.dsc b/Platform/Hisilicon/D05/D05.dsc
index ab7c5caf86..585184654b 100644
--- a/Platform/Hisilicon/D05/D05.dsc
+++ b/Platform/Hisilicon/D05/D05.dsc
@@ -611,7 +611,7 @@
<LibraryClasses>
NULL|Platform/Hisilicon/D05/Library/PlatformPciLib/PlatformPciLib.inf
}
- Platform/Hisilicon/D03/Drivers/PciPlatform/PciPlatform.inf
+ Silicon/Hisilicon/Drivers/PciPlatform/PciPlatform.inf
Silicon/Hisilicon/Drivers/PciHostBridgeDxe/PciHostBridgeDxe.inf {
<LibraryClasses>
DmaLib|EmbeddedPkg/Library/CoherentDmaLib/CoherentDmaLib.inf
diff --git a/Platform/Hisilicon/D05/D05.fdf b/Platform/Hisilicon/D05/D05.fdf
index 61e8d907f9..2fa7a63d72 100644
--- a/Platform/Hisilicon/D05/D05.fdf
+++ b/Platform/Hisilicon/D05/D05.fdf
@@ -285,7 +285,7 @@ READ_LOCK_STATUS = TRUE
# PCI Support
#
INF Silicon/Hisilicon/Hi1610/Drivers/PcieInit1610/PcieInitDxe.inf
- INF Platform/Hisilicon/D03/Drivers/PciPlatform/PciPlatform.inf
+ INF Silicon/Hisilicon/Drivers/PciPlatform/PciPlatform.inf
INF Silicon/Hisilicon/Drivers/PciHostBridgeDxe/PciHostBridgeDxe.inf
INF MdeModulePkg/Bus/Pci/PciBusDxe/PciBusDxe.inf
diff --git a/Platform/Hisilicon/D03/Drivers/PciPlatform/PciPlatform.c b/Silicon/Hisilicon/Drivers/PciPlatform/PciPlatform.c
similarity index 100%
rename from Platform/Hisilicon/D03/Drivers/PciPlatform/PciPlatform.c
rename to Silicon/Hisilicon/Drivers/PciPlatform/PciPlatform.c
diff --git a/Platform/Hisilicon/D03/Drivers/PciPlatform/PciPlatform.inf b/Silicon/Hisilicon/Drivers/PciPlatform/PciPlatform.inf
similarity index 100%
rename from Platform/Hisilicon/D03/Drivers/PciPlatform/PciPlatform.inf
rename to Silicon/Hisilicon/Drivers/PciPlatform/PciPlatform.inf
--
2.17.0
^ permalink raw reply related [flat|nested] 16+ messages in thread
* [PATCH edk2-platforms v1 04/13] Hisilicon/Pci: Add two api for PciPlatform driver
2018-07-20 8:02 [PATCH edk2-platforms v1 00/13] Switching to generic PciHostBridge driver Ming Huang
` (2 preceding siblings ...)
2018-07-20 8:02 ` [PATCH edk2-platforms v1 03/13] Hisilicon/Pci: Move PciPlatform to common directory Ming Huang
@ 2018-07-20 8:02 ` Ming Huang
2018-07-20 8:02 ` [PATCH edk2-platforms v1 05/13] Hisilicon/Pci: move ATU configuration to PciPlatformLib Ming Huang
` (8 subsequent siblings)
12 siblings, 0 replies; 16+ messages in thread
From: Ming Huang @ 2018-07-20 8:02 UTC (permalink / raw)
To: leif.lindholm, linaro-uefi, edk2-devel, graeme.gregory
Cc: ard.biesheuvel, guoheyi, wanghuiqiang, huangming23, zhangjinsong2,
huangdaode, john.garry, Ming Huang, Heyi Guo
PciPlatform may add some features platform special, like
InitAtu and EnlargeAtu for Hi161x, MaxPlayload for Hi1620.
So Add two api for expansibility.
This patch is to prepare moving EnlargeAtuConfig0() out of
PciHostBridge. Since the function was originally called in
NotifyPhase() of phase EfiPciHostBridgeEndEnumeration, so we propose
to move it to EFI_PCI_PLATFORM_PROTOCOL->PlatformNotify().
To reduce redundant ATU definitions, we also move InitAtu to
PciPlatformLib in Hi161x.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ming Huang <ming.huang@linaro.org>
Signed-off-by: Heyi Guo <heyi.guo@linaro.org>
---
Silicon/Hisilicon/Drivers/PciPlatform/PciPlatform.c | 45 ++++++++++++++++++++
Silicon/Hisilicon/Drivers/PciPlatform/PciPlatform.inf | 1 +
2 files changed, 46 insertions(+)
diff --git a/Silicon/Hisilicon/Drivers/PciPlatform/PciPlatform.c b/Silicon/Hisilicon/Drivers/PciPlatform/PciPlatform.c
index 8bfac2d99f..fcdd36cf94 100644
--- a/Silicon/Hisilicon/Drivers/PciPlatform/PciPlatform.c
+++ b/Silicon/Hisilicon/Drivers/PciPlatform/PciPlatform.c
@@ -103,6 +103,48 @@ PCI_OPTION_ROM_TABLE mPciOptionRomTable[] = {
}
};
+/*++
+
+ Routine Description:
+
+ Perform Platform initialization first in PciPlatform.
+
+ Arguments:
+
+ Returns:
+
+ VOID.
+
+--*/
+VOID
+EFIAPI
+PciInitPlatform (
+ VOID
+ );
+
+/*++
+
+ Routine Description:
+
+ Perform Platform initialization by the phase indicated.
+
+ Arguments:
+
+ HostBridge - The associated PCI host bridge handle.
+ Phase - The phase of the PCI controller enumeration.
+ ChipsetPhase - Defines the execution phase of the PCI chipset driver.
+
+ Returns:
+
+--*/
+VOID
+EFIAPI
+PhaseNotifyPlatform (
+ IN EFI_HANDLE HostBridge,
+ IN EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PHASE Phase,
+ IN EFI_PCI_CHIPSET_EXECUTION_PHASE ChipsetPhase
+ );
+
EFI_STATUS
EFIAPI
GetPlatformPolicy (
@@ -387,6 +429,7 @@ Returns:
--*/
{
+ PhaseNotifyPlatform (HostBridge, Phase, ChipsetPhase);
return EFI_SUCCESS;
}
@@ -415,6 +458,8 @@ Returns:
EFI_STATUS Status;
PCI_PLATFORM_PRIVATE_DATA *PciPrivateData;
+ PciInitPlatform ();
+
PciPrivateData = AllocateZeroPool (sizeof (PCI_PLATFORM_PRIVATE_DATA));
mPciPrivateData = PciPrivateData;
diff --git a/Silicon/Hisilicon/Drivers/PciPlatform/PciPlatform.inf b/Silicon/Hisilicon/Drivers/PciPlatform/PciPlatform.inf
index 8b170d2654..099021fcc8 100644
--- a/Silicon/Hisilicon/Drivers/PciPlatform/PciPlatform.inf
+++ b/Silicon/Hisilicon/Drivers/PciPlatform/PciPlatform.inf
@@ -38,6 +38,7 @@
ArmLib
IoLib
MemoryAllocationLib
+ PciPlatformLib
[Protocols]
gEfiPciPlatformProtocolGuid
--
2.17.0
^ permalink raw reply related [flat|nested] 16+ messages in thread
* [PATCH edk2-platforms v1 05/13] Hisilicon/Pci: move ATU configuration to PciPlatformLib
2018-07-20 8:02 [PATCH edk2-platforms v1 00/13] Switching to generic PciHostBridge driver Ming Huang
` (3 preceding siblings ...)
2018-07-20 8:02 ` [PATCH edk2-platforms v1 04/13] Hisilicon/Pci: Add two api for PciPlatform driver Ming Huang
@ 2018-07-20 8:02 ` Ming Huang
2018-07-20 8:02 ` [PATCH edk2-platforms v1 06/13] Hisilicon/Pci: move EnlargeAtuConfig0() " Ming Huang
` (7 subsequent siblings)
12 siblings, 0 replies; 16+ messages in thread
From: Ming Huang @ 2018-07-20 8:02 UTC (permalink / raw)
To: leif.lindholm, linaro-uefi, edk2-devel, graeme.gregory
Cc: ard.biesheuvel, guoheyi, wanghuiqiang, huangming23, zhangjinsong2,
huangdaode, john.garry, Ming Huang, Heyi Guo, Michael D Kinney
we move all platform specific code to platform specific module, not
in PciHostBridge driver.
This is to prepare for switching to generic PciHostBridge driver, so
This patch add Hi161xPciPlatformLib and moves ATU initialization to
Hi161xPciPlatformLib and add api PciInitPlatform for PciPlatform driver.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Heyi Guo <heyi.guo@linaro.org>
Signed-off-by: Ming Huang <ming.huang@linaro.org>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
---
Silicon/Hisilicon/Drivers/PciHostBridgeDxe/PciRootBridgeIo.c | 107 -----------
Silicon/Hisilicon/Hi1610/Library/Hi161xPciPlatformLib/Hi161xPciPlatformLib.c | 185 ++++++++++++++++++++
Silicon/Hisilicon/Hi1610/Library/Hi161xPciPlatformLib/Hi161xPciPlatformLib.inf | 42 +++++
3 files changed, 227 insertions(+), 107 deletions(-)
diff --git a/Silicon/Hisilicon/Drivers/PciHostBridgeDxe/PciRootBridgeIo.c b/Silicon/Hisilicon/Drivers/PciHostBridgeDxe/PciRootBridgeIo.c
index 3f894e8eec..273a322ee4 100644
--- a/Silicon/Hisilicon/Drivers/PciHostBridgeDxe/PciRootBridgeIo.c
+++ b/Silicon/Hisilicon/Drivers/PciHostBridgeDxe/PciRootBridgeIo.c
@@ -633,112 +633,6 @@ UINT64 GetPcieCfgAddress (
}
-void SetAtuConfig0RW (
- PCI_ROOT_BRIDGE_INSTANCE *Private,
- UINT32 Index
- )
-{
- UINTN RbPciBase = Private->RbPciBar;
- UINT64 MemLimit = GetPcieCfgAddress (Private->Ecam, Private->BusBase + 1, 1, 0, 0) - 1;
- UINT64 Cfg0Base = GetPcieCfgAddress (Private->Ecam, Private->BusBase, 0, 0, 0);
-
-
- MmioWrite32 (RbPciBase + IATU_OFFSET + IATU_VIEW_POINT, Index);
- MmioWrite32 (RbPciBase + IATU_OFFSET + IATU_REGION_BASE_LOW, (UINT32)(Cfg0Base));
- MmioWrite32 (RbPciBase + IATU_OFFSET + IATU_REGION_BASE_HIGH, (UINT32)(Cfg0Base >> 32));
- MmioWrite32 (RbPciBase + IATU_OFFSET + IATU_REGION_BASE_LIMIT, (UINT32) MemLimit);
- MmioWrite32 (RbPciBase + IATU_OFFSET + IATU_REGION_TARGET_LOW, 0);
- MmioWrite32 (RbPciBase + IATU_OFFSET + IATU_REGION_TARGET_HIGH, 0);
- MmioWrite32 (RbPciBase + IATU_OFFSET + IATU_REGION_CTRL1, IATU_CTRL1_TYPE_CONFIG0);
- MmioWrite32 (RbPciBase + IATU_OFFSET + IATU_REGION_CTRL2, IATU_SHIIF_MODE);
-
- {
- UINTN i;
- for (i=0; i<0x20; i+=4) {
- DEBUG ((EFI_D_ERROR, "[%a:%d] - Base=%p value=%x\n", __FUNCTION__, __LINE__, RbPciBase + 0x900 + i, MmioRead32(RbPciBase + 0x900 + i)));
- }
- }
-}
-
-void SetAtuConfig1RW (
- PCI_ROOT_BRIDGE_INSTANCE *Private,
- UINT32 Index
- )
-{
- UINTN RbPciBase = Private->RbPciBar;
- UINT64 MemLimit = GetPcieCfgAddress (Private->Ecam, Private->BusLimit, 0x1F, 0x07, 0xFFF);
- UINT64 Cfg1Base = GetPcieCfgAddress (Private->Ecam, Private->BusBase + 2, 0, 0, 0);
-
- MmioWrite32 (RbPciBase + IATU_OFFSET + IATU_VIEW_POINT, Index);
- MmioWrite32 (RbPciBase + IATU_OFFSET + IATU_REGION_CTRL1, IATU_CTRL1_TYPE_CONFIG1);
- MmioWrite32 (RbPciBase + IATU_OFFSET + IATU_REGION_BASE_LOW, (UINT32)(Cfg1Base));
- MmioWrite32 (RbPciBase + IATU_OFFSET + IATU_REGION_BASE_HIGH, (UINT32)(Cfg1Base >> 32));
- MmioWrite32 (RbPciBase + IATU_OFFSET + IATU_REGION_BASE_LIMIT, (UINT32) MemLimit);
- MmioWrite32 (RbPciBase + IATU_OFFSET + IATU_REGION_TARGET_LOW, 0);
- MmioWrite32 (RbPciBase + IATU_OFFSET + IATU_REGION_TARGET_HIGH, 0);
- MmioWrite32 (RbPciBase + IATU_OFFSET + IATU_REGION_CTRL2, IATU_SHIIF_MODE);
-
- {
- UINTN i;
- for (i=0; i<0x20; i+=4) {
- DEBUG ((EFI_D_ERROR, "[%a:%d] - Base=%p value=%x\n", __FUNCTION__, __LINE__, RbPciBase + 0x900 + i, MmioRead32(RbPciBase + 0x900 + i)));
- }
- }
-}
-
-void SetAtuIoRW(UINT64 RbPciBase,UINT64 IoBase,UINT64 CpuIoRegionLimit, UINT64 CpuIoRegionBase, UINT32 Index)
-{
-
- MmioWrite32 (RbPciBase + IATU_OFFSET + IATU_VIEW_POINT, Index);
- MmioWrite32 (RbPciBase + IATU_OFFSET + IATU_REGION_CTRL1, IATU_CTRL1_TYPE_IO);
-
- MmioWrite32 (RbPciBase + IATU_OFFSET + IATU_REGION_BASE_LOW, (UINT32)(CpuIoRegionBase));
- MmioWrite32 (RbPciBase + IATU_OFFSET + IATU_REGION_BASE_HIGH, (UINT32)((UINT64)CpuIoRegionBase >> 32));
- MmioWrite32 (RbPciBase + IATU_OFFSET + IATU_REGION_BASE_LIMIT, (UINT32)(CpuIoRegionLimit));
- MmioWrite32 (RbPciBase + IATU_OFFSET + IATU_REGION_TARGET_LOW, (UINT32)(IoBase));
- MmioWrite32 (RbPciBase + IATU_OFFSET + IATU_REGION_TARGET_HIGH, (UINT32)((UINT64)(IoBase) >> 32));
-
- MmioWrite32 (RbPciBase + IATU_OFFSET + IATU_REGION_CTRL2, IATU_NORMAL_MODE);
-
- {
- UINTN i;
- for (i=0; i<0x20; i+=4) {
- DEBUG ((EFI_D_ERROR, "[%a:%d] - Base=%p value=%x\n", __FUNCTION__, __LINE__, RbPciBase + 0x900 + i, MmioRead32(RbPciBase + 0x900 + i)));
- }
- }
-}
-
-void SetAtuMemRW(UINT64 RbPciBase,UINT64 MemBase,UINT64 CpuMemRegionLimit, UINT64 CpuMemRegionBase, UINT32 Index)
-{
-
- MmioWrite32 (RbPciBase + IATU_OFFSET + IATU_VIEW_POINT, Index);
- MmioWrite32 (RbPciBase + IATU_OFFSET + IATU_REGION_CTRL1, IATU_CTRL1_TYPE_MEM);
-
- MmioWrite32 (RbPciBase + IATU_OFFSET + IATU_REGION_BASE_LOW, (UINT32)(CpuMemRegionBase));
- MmioWrite32 (RbPciBase + IATU_OFFSET + IATU_REGION_BASE_HIGH, (UINT32)((UINT64)(CpuMemRegionBase) >> 32));
- MmioWrite32 (RbPciBase + IATU_OFFSET + IATU_REGION_BASE_LIMIT, (UINT32)(CpuMemRegionLimit));
- MmioWrite32 (RbPciBase + IATU_OFFSET + IATU_REGION_TARGET_LOW, (UINT32)(MemBase));
- MmioWrite32 (RbPciBase + IATU_OFFSET + IATU_REGION_TARGET_HIGH, (UINT32)((UINT64)(MemBase) >> 32));
-
- MmioWrite32 (RbPciBase + IATU_OFFSET + IATU_REGION_CTRL2, IATU_NORMAL_MODE);
-
- {
- UINTN i;
- for (i=0; i<0x20; i+=4) {
- DEBUG ((EFI_D_ERROR, "[%a:%d] - Base=%p value=%x\n", __FUNCTION__, __LINE__, RbPciBase + 0x900 + i, MmioRead32(RbPciBase + 0x900 + i)));
- }
- }
-}
-
-VOID InitAtu (PCI_ROOT_BRIDGE_INSTANCE *Private)
-{
- SetAtuMemRW (Private->RbPciBar, Private->PciRegionBase, Private->PciRegionLimit, Private->CpuMemRegionBase, 0);
- SetAtuConfig0RW (Private, 1);
- SetAtuConfig1RW (Private, 2);
- SetAtuIoRW (Private->RbPciBar, Private->IoBase, Private->IoLimit, Private->CpuIoRegionBase, 3);
-}
-
-
BOOLEAN PcieIsLinkUp (UINT32 SocType, UINTN RbPciBar, UINTN Port)
{
UINT32 Value = 0;
@@ -861,7 +755,6 @@ RootBridgeConstructor (
Protocol->SegmentNumber = Seg;
- InitAtu (PrivateData);
Status = gBS->LocateProtocol (&gEfiMetronomeArchProtocolGuid, NULL, (VOID **)&mMetronome);
if (EFI_ERROR(Status))
diff --git a/Silicon/Hisilicon/Hi1610/Library/Hi161xPciPlatformLib/Hi161xPciPlatformLib.c b/Silicon/Hisilicon/Hi1610/Library/Hi161xPciPlatformLib/Hi161xPciPlatformLib.c
new file mode 100644
index 0000000000..de26259778
--- /dev/null
+++ b/Silicon/Hisilicon/Hi1610/Library/Hi161xPciPlatformLib/Hi161xPciPlatformLib.c
@@ -0,0 +1,185 @@
+/** @file
+*
+* Copyright (c) 2018, Hisilicon Limited. All rights reserved.
+* Copyright (c) 2018, Linaro Limited. All rights reserved.
+*
+* This program and the accompanying materials
+* are licensed and made available under the terms and conditions of the BSD License
+* which accompanies this distribution. The full text of the license may be found at
+* http://opensource.org/licenses/bsd-license.php
+*
+* THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+* WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+*
+**/
+
+#include <Uefi.h>
+#include <Library/DebugLib.h>
+#include <Library/IoLib.h>
+#include <Library/OemMiscLib.h>
+#include <Library/PcdLib.h>
+#include <Library/PciExpressLib.h>
+#include <Library/PlatformPciLib.h>
+#include <Library/UefiBootServicesTableLib.h>
+#include <Regs/HisiPcieV1RegOffset.h>
+
+
+STATIC
+UINT64
+GetPcieCfgAddress (
+ UINT64 Ecam,
+ UINTN Bus,
+ UINTN Device,
+ UINTN Function,
+ UINTN Reg
+ )
+{
+ return Ecam + PCI_EXPRESS_LIB_ADDRESS (Bus, Device, Function, Reg);
+}
+
+STATIC
+VOID
+SetAtuConfig0RW (
+ PCI_ROOT_BRIDGE_RESOURCE_APPETURE *Private,
+ UINT32 Index
+ )
+{
+ UINTN RbPciBase = Private->RbPciBar;
+ UINT64 MemLimit = GetPcieCfgAddress (Private->Ecam, Private->BusBase + 1, 1, 0, 0) - 1;
+ UINT64 MemBase = GetPcieCfgAddress (Private->Ecam, Private->BusBase, 0, 0, 0);
+
+
+ MmioWrite32 (RbPciBase + IATU_OFFSET + IATU_VIEW_POINT, Index);
+ MmioWrite32 (RbPciBase + IATU_OFFSET + IATU_REGION_BASE_LOW, (UINT32)MemBase);
+ MmioWrite32 (RbPciBase + IATU_OFFSET + IATU_REGION_BASE_HIGH, (UINT32)(MemBase >> 32));
+ MmioWrite32 (RbPciBase + IATU_OFFSET + IATU_REGION_BASE_LIMIT, (UINT32) MemLimit);
+ MmioWrite32 (RbPciBase + IATU_OFFSET + IATU_REGION_TARGET_LOW, 0);
+ MmioWrite32 (RbPciBase + IATU_OFFSET + IATU_REGION_TARGET_HIGH, 0);
+ MmioWrite32 (RbPciBase + IATU_OFFSET + IATU_REGION_CTRL1, IATU_CTRL1_TYPE_CONFIG0);
+ MmioWrite32 (RbPciBase + IATU_OFFSET + IATU_REGION_CTRL2, IATU_SHIIF_MODE);
+
+ {
+ UINTN i;
+ for (i=0; i<0x20; i+=4) {
+ DEBUG ((DEBUG_ERROR, "[%a:%d] - Base=%p value=%x\n", __FUNCTION__, __LINE__, RbPciBase + 0x900 + i, MmioRead32(RbPciBase + 0x900 + i)));
+ }
+ }
+}
+
+STATIC
+VOID
+SetAtuConfig1RW (
+ PCI_ROOT_BRIDGE_RESOURCE_APPETURE *Private,
+ UINT32 Index
+ )
+{
+ UINTN RbPciBase = Private->RbPciBar;
+ UINT64 MemLimit = GetPcieCfgAddress (Private->Ecam, Private->BusLimit + 1, 0, 0, 0) - 1;
+ UINT64 MemBase = GetPcieCfgAddress (Private->Ecam, Private->BusBase + 2, 0, 0, 0);
+
+
+ MmioWrite32 (RbPciBase + IATU_OFFSET + IATU_VIEW_POINT, Index);
+ MmioWrite32 (RbPciBase + IATU_OFFSET + IATU_REGION_CTRL1, IATU_CTRL1_TYPE_CONFIG1);
+ MmioWrite32 (RbPciBase + IATU_OFFSET + IATU_REGION_BASE_LOW, (UINT32)MemBase);
+ MmioWrite32 (RbPciBase + IATU_OFFSET + IATU_REGION_BASE_HIGH, (UINT32)(MemBase >> 32));
+ MmioWrite32 (RbPciBase + IATU_OFFSET + IATU_REGION_BASE_LIMIT, (UINT32) MemLimit);
+ MmioWrite32 (RbPciBase + IATU_OFFSET + IATU_REGION_TARGET_LOW, 0);
+ MmioWrite32 (RbPciBase + IATU_OFFSET + IATU_REGION_TARGET_HIGH, 0);
+ MmioWrite32 (RbPciBase + IATU_OFFSET + IATU_REGION_CTRL2, IATU_SHIIF_MODE);
+
+ {
+ UINTN i;
+ for (i=0; i<0x20; i+=4) {
+ DEBUG ((DEBUG_ERROR, "[%a:%d] - Base=%p value=%x\n", __FUNCTION__, __LINE__, RbPciBase + 0x900 + i, MmioRead32(RbPciBase + 0x900 + i)));
+ }
+ }
+}
+
+STATIC
+VOID
+SetAtuIoRW (UINT64 RbPciBase,UINT64 IoBase,UINT64 CpuIoRegionLimit, UINT64 CpuIoRegionBase, UINT32 Index)
+{
+
+ MmioWrite32 (RbPciBase + IATU_OFFSET + IATU_VIEW_POINT, Index);
+ MmioWrite32 (RbPciBase + IATU_OFFSET + IATU_REGION_CTRL1, IATU_CTRL1_TYPE_IO);
+
+ MmioWrite32 (RbPciBase + IATU_OFFSET + IATU_REGION_BASE_LOW, (UINT32)(CpuIoRegionBase));
+ MmioWrite32 (RbPciBase + IATU_OFFSET + IATU_REGION_BASE_HIGH, (UINT32)((UINT64)CpuIoRegionBase >> 32));
+ MmioWrite32 (RbPciBase + IATU_OFFSET + IATU_REGION_BASE_LIMIT, (UINT32)(CpuIoRegionLimit));
+ MmioWrite32 (RbPciBase + IATU_OFFSET + IATU_REGION_TARGET_LOW, (UINT32)(IoBase));
+ MmioWrite32 (RbPciBase + IATU_OFFSET + IATU_REGION_TARGET_HIGH, (UINT32)((UINT64)(IoBase) >> 32));
+
+ MmioWrite32 (RbPciBase + IATU_OFFSET + IATU_REGION_CTRL2, IATU_NORMAL_MODE);
+
+ {
+ UINTN i;
+ for (i=0; i<0x20; i+=4) {
+ DEBUG ((DEBUG_ERROR, "[%a:%d] - Base=%p value=%x\n", __FUNCTION__, __LINE__, RbPciBase + 0x900 + i, MmioRead32(RbPciBase + 0x900 + i)));
+ }
+ }
+}
+
+STATIC
+VOID
+SetAtuMemRW(UINT64 RbPciBase,UINT64 MemBase,UINT64 CpuMemRegionLimit, UINT64 CpuMemRegionBase, UINT32 Index)
+{
+
+ MmioWrite32 (RbPciBase + IATU_OFFSET + IATU_VIEW_POINT, Index);
+ MmioWrite32 (RbPciBase + IATU_OFFSET + IATU_REGION_CTRL1, IATU_CTRL1_TYPE_MEM);
+
+ MmioWrite32 (RbPciBase + IATU_OFFSET + IATU_REGION_BASE_LOW, (UINT32)(CpuMemRegionBase));
+ MmioWrite32 (RbPciBase + IATU_OFFSET + IATU_REGION_BASE_HIGH, (UINT32)((UINT64)(CpuMemRegionBase) >> 32));
+ MmioWrite32 (RbPciBase + IATU_OFFSET + IATU_REGION_BASE_LIMIT, (UINT32)(CpuMemRegionLimit));
+ MmioWrite32 (RbPciBase + IATU_OFFSET + IATU_REGION_TARGET_LOW, (UINT32)(MemBase));
+ MmioWrite32 (RbPciBase + IATU_OFFSET + IATU_REGION_TARGET_HIGH, (UINT32)((UINT64)(MemBase) >> 32));
+
+ MmioWrite32 (RbPciBase + IATU_OFFSET + IATU_REGION_CTRL2, IATU_NORMAL_MODE);
+
+ {
+ UINTN i;
+ for (i=0; i<0x20; i+=4) {
+ DEBUG ((DEBUG_ERROR, "[%a:%d] - Base=%p value=%x\n", __FUNCTION__, __LINE__, RbPciBase + 0x900 + i, MmioRead32(RbPciBase + 0x900 + i)));
+ }
+ }
+}
+
+VOID
+InitAtu (PCI_ROOT_BRIDGE_RESOURCE_APPETURE *Private)
+{
+ SetAtuMemRW (Private->RbPciBar, Private->PciRegionBase, Private->PciRegionLimit, Private->CpuMemRegionBase, 0);
+ SetAtuConfig0RW (Private, 1);
+ SetAtuConfig1RW (Private, 2);
+ SetAtuIoRW (Private->RbPciBar, Private->IoBase, Private->IoLimit, Private->CpuIoRegionBase, 3);
+}
+
+/*++
+
+Routine Description:
+
+ Perform Platform initialization first in PciPlatform.
+
+Arguments:
+
+Returns:
+
+ VOID.
+
+--*/
+VOID
+EFIAPI
+PciInitPlatform (
+ VOID
+ )
+{
+ UINT32 Port;
+ UINT32 HostBridgeNum = 0;
+
+ for (HostBridgeNum = 0; HostBridgeNum < PCIE_MAX_HOSTBRIDGE; HostBridgeNum++) {
+ for (Port = 0; Port < PCIE_MAX_ROOTBRIDGE; Port++) {
+ InitAtu (&mResAppeture[HostBridgeNum][Port]);
+ }
+ }
+
+ return;
+}
+
diff --git a/Silicon/Hisilicon/Hi1610/Library/Hi161xPciPlatformLib/Hi161xPciPlatformLib.inf b/Silicon/Hisilicon/Hi1610/Library/Hi161xPciPlatformLib/Hi161xPciPlatformLib.inf
new file mode 100644
index 0000000000..274cad0abf
--- /dev/null
+++ b/Silicon/Hisilicon/Hi1610/Library/Hi161xPciPlatformLib/Hi161xPciPlatformLib.inf
@@ -0,0 +1,42 @@
+## @file
+# PCI Segment Library for Hisilicon Hi1610/Hi1616 SoC with multiple RCs
+#
+# Copyright (c) 2007 - 2014, Intel Corporation. All rights reserved.<BR>
+# Copyright (c) 2017 - 2018, Linaro Ltd. All rights reserved.<BR>
+# Copyright (c) 2018, Hisilicon Ltd. All rights reserved.<BR>
+#
+# This program and the accompanying materials
+# are licensed and made available under the terms and conditions of the BSD License
+# which accompanies this distribution. The full text of the license may be found at
+# http://opensource.org/licenses/bsd-license.php.
+# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+#
+#
+##
+
+[Defines]
+ INF_VERSION = 0x0001001A
+ BASE_NAME = Hi161xPciPlatformLib
+ FILE_GUID = 22447df4-0baa-11e8-b6de-286ed489ee9b
+ MODULE_TYPE = BASE
+ VERSION_STRING = 1.0
+ LIBRARY_CLASS = PciPlatformLib
+
+[Sources]
+ Hi161xPciPlatformLib.c
+
+[Packages]
+ MdePkg/MdePkg.dec
+ Silicon/Hisilicon/HisiPkg.dec
+
+[LibraryClasses]
+ BaseLib
+ DebugLib
+ IoLib
+ PlatformPciLib
+
+[Protocols]
+ gEfiPciHostBridgeResourceAllocationProtocolGuid
+ gEfiPciIoProtocolGuid
+ gEfiPciRootBridgeIoProtocolGuid
--
2.17.0
^ permalink raw reply related [flat|nested] 16+ messages in thread
* [PATCH edk2-platforms v1 06/13] Hisilicon/Pci: move EnlargeAtuConfig0() to PciPlatformLib
2018-07-20 8:02 [PATCH edk2-platforms v1 00/13] Switching to generic PciHostBridge driver Ming Huang
` (4 preceding siblings ...)
2018-07-20 8:02 ` [PATCH edk2-platforms v1 05/13] Hisilicon/Pci: move ATU configuration to PciPlatformLib Ming Huang
@ 2018-07-20 8:02 ` Ming Huang
2018-07-20 8:02 ` [PATCH edk2-platforms v1 07/13] Hisilicon/PlatformPciLib: add segment for each root bridge Ming Huang
` (6 subsequent siblings)
12 siblings, 0 replies; 16+ messages in thread
From: Ming Huang @ 2018-07-20 8:02 UTC (permalink / raw)
To: leif.lindholm, linaro-uefi, edk2-devel, graeme.gregory
Cc: ard.biesheuvel, guoheyi, wanghuiqiang, huangming23, zhangjinsong2,
huangdaode, john.garry, Ming Huang, Heyi Guo, Michael D Kinney
we move all platform specific code to platform specific module, not
in PciHostBridge driver.
This is to prepare for switching to generic PciHostBridge driver, so
This patch is to move EnlargeAtuConfig0() into PcieInitDxe, in
PlatformNotify() of EFI_PCI_PLATFORM_PROTOCOL and implement api
PhaseNotifyPlatform for PciPlatform driver.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Heyi Guo <heyi.guo@linaro.org>
Signed-off-by: Ming Huang <ming.huang@linaro.org>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
---
Silicon/Hisilicon/Drivers/PciHostBridgeDxe/PciHostBridge.c | 1 -
Silicon/Hisilicon/Drivers/PciHostBridgeDxe/PciHostBridge.h | 8 -
Silicon/Hisilicon/Drivers/PciHostBridgeDxe/PciRootBridgeIo.c | 78 --------
Silicon/Hisilicon/Hi1610/Library/Hi161xPciPlatformLib/Hi161xPciPlatformLib.c | 199 ++++++++++++++++++++
4 files changed, 199 insertions(+), 87 deletions(-)
diff --git a/Silicon/Hisilicon/Drivers/PciHostBridgeDxe/PciHostBridge.c b/Silicon/Hisilicon/Drivers/PciHostBridgeDxe/PciHostBridge.c
index 9fa3f84098..e3d3988a64 100644
--- a/Silicon/Hisilicon/Drivers/PciHostBridgeDxe/PciHostBridge.c
+++ b/Silicon/Hisilicon/Drivers/PciHostBridgeDxe/PciHostBridge.c
@@ -839,7 +839,6 @@ NotifyPhase(
case EfiPciHostBridgeEndEnumeration:
PCIE_DEBUG("Case EfiPciHostBridgeEndEnumeration\n");
- EnlargeAtuConfig0 (This);
break;
case EfiPciHostBridgeBeginBusAllocation:
diff --git a/Silicon/Hisilicon/Drivers/PciHostBridgeDxe/PciHostBridge.h b/Silicon/Hisilicon/Drivers/PciHostBridgeDxe/PciHostBridge.h
index c04361fcee..435385491a 100644
--- a/Silicon/Hisilicon/Drivers/PciHostBridgeDxe/PciHostBridge.h
+++ b/Silicon/Hisilicon/Drivers/PciHostBridgeDxe/PciHostBridge.h
@@ -401,10 +401,6 @@ PreprocessController (
#define EFI_RESOURCE_NONEXISTENT 0xFFFFFFFFFFFFFFFFULL
#define EFI_RESOURCE_LESS 0xFFFFFFFFFFFFFFFEULL
-#define INVALID_CAPABILITY_00 0x00
-#define INVALID_CAPABILITY_FF 0xFF
-#define PCI_CAPABILITY_POINTER_MASK 0xFC
-
//
// Driver Instance Data Prototypes
//
@@ -521,8 +517,4 @@ RootBridgeConstructor (
IN UINT32 Seg
);
-VOID
-EnlargeAtuConfig0 (
- IN EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL *This
- );
#endif
diff --git a/Silicon/Hisilicon/Drivers/PciHostBridgeDxe/PciRootBridgeIo.c b/Silicon/Hisilicon/Drivers/PciHostBridgeDxe/PciRootBridgeIo.c
index 273a322ee4..3c265ea433 100644
--- a/Silicon/Hisilicon/Drivers/PciHostBridgeDxe/PciRootBridgeIo.c
+++ b/Silicon/Hisilicon/Drivers/PciHostBridgeDxe/PciRootBridgeIo.c
@@ -2218,81 +2218,3 @@ RootBridgeIoConfiguration (
return EFI_SUCCESS;
}
-BOOLEAN
-PcieCheckAriFwdEn (
- UINTN PciBaseAddr
- )
-{
- UINT8 PciPrimaryStatus;
- UINT8 CapabilityOffset;
- UINT8 CapId;
- UINT8 TempData;
-
- PciPrimaryStatus = MmioRead16 (PciBaseAddr + PCI_PRIMARY_STATUS_OFFSET);
-
- if (PciPrimaryStatus & EFI_PCI_STATUS_CAPABILITY) {
- CapabilityOffset = MmioRead8 (PciBaseAddr + PCI_CAPBILITY_POINTER_OFFSET);
- CapabilityOffset &= PCI_CAPABILITY_POINTER_MASK;
-
- while ((CapabilityOffset != INVALID_CAPABILITY_00) && (CapabilityOffset != INVALID_CAPABILITY_FF)) {
- CapId = MmioRead8 (PciBaseAddr + CapabilityOffset);
- if (CapId == EFI_PCI_CAPABILITY_ID_PCIEXP) {
- break;
- }
- CapabilityOffset = MmioRead8 (PciBaseAddr + CapabilityOffset + 1);
- CapabilityOffset &= PCI_CAPABILITY_POINTER_MASK;
- }
- } else {
- PCIE_DEBUG ("[%a:%d] - No PCIE Capability.\n", __FUNCTION__, __LINE__);
- return FALSE;
- }
-
- if ((CapabilityOffset == INVALID_CAPABILITY_FF) || (CapabilityOffset == INVALID_CAPABILITY_00)) {
- PCIE_DEBUG ("[%a:%d] - No PCIE Capability.\n", __FUNCTION__, __LINE__);
- return FALSE;
- }
-
- TempData = MmioRead16 (PciBaseAddr + CapabilityOffset +
- EFI_PCIE_CAPABILITY_DEVICE_CONTROL_2_OFFSET);
- TempData &= EFI_PCIE_CAPABILITY_DEVICE_CAPABILITIES_2_ARI_FORWARDING;
-
- if (TempData == EFI_PCIE_CAPABILITY_DEVICE_CAPABILITIES_2_ARI_FORWARDING) {
- return TRUE;
- } else {
- return FALSE;
- }
-}
-
-VOID
-EnlargeAtuConfig0 (
- IN EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL *This
- )
-{
- UINTN RbPciBase;
- UINT64 MemLimit;
- LIST_ENTRY *List;
- PCI_HOST_BRIDGE_INSTANCE *HostBridgeInstance;
- PCI_ROOT_BRIDGE_INSTANCE *RootBridgeInstance;
-
- PCIE_DEBUG ("In Enlarge RP iatu Config 0.\n");
-
- HostBridgeInstance = INSTANCE_FROM_RESOURCE_ALLOCATION_THIS (This);
- List = HostBridgeInstance->Head.ForwardLink;
-
- while (List != &HostBridgeInstance->Head) {
- PCIE_DEBUG ("HostBridge has data.\n");
- RootBridgeInstance = DRIVER_INSTANCE_FROM_LIST_ENTRY (List);
-
- RbPciBase = RootBridgeInstance->RbPciBar;
-
- // Those ARI FWD Enable Root Bridge, need enlarge iatu window.
- if (PcieCheckAriFwdEn (RbPciBase)) {
- MemLimit = GetPcieCfgAddress (RootBridgeInstance->Ecam,
- RootBridgeInstance->BusBase + 2, 0, 0, 0)
- - 1;
- MmioWrite32 (RbPciBase + IATU_OFFSET + IATU_VIEW_POINT, 1);
- MmioWrite32 (RbPciBase + IATU_OFFSET + IATU_REGION_BASE_LIMIT, (UINT32) MemLimit);
- }
- List = List->ForwardLink;
- }
-}
diff --git a/Silicon/Hisilicon/Hi1610/Library/Hi161xPciPlatformLib/Hi161xPciPlatformLib.c b/Silicon/Hisilicon/Hi1610/Library/Hi161xPciPlatformLib/Hi161xPciPlatformLib.c
index de26259778..dad848e714 100644
--- a/Silicon/Hisilicon/Hi1610/Library/Hi161xPciPlatformLib/Hi161xPciPlatformLib.c
+++ b/Silicon/Hisilicon/Hi1610/Library/Hi161xPciPlatformLib/Hi161xPciPlatformLib.c
@@ -14,6 +14,7 @@
**/
#include <Uefi.h>
+#include <IndustryStandard/Acpi.h>
#include <Library/DebugLib.h>
#include <Library/IoLib.h>
#include <Library/OemMiscLib.h>
@@ -21,8 +22,14 @@
#include <Library/PciExpressLib.h>
#include <Library/PlatformPciLib.h>
#include <Library/UefiBootServicesTableLib.h>
+#include <Protocol/PciHostBridgeResourceAllocation.h>
+#include <Protocol/PciPlatform.h>
+#include <Protocol/PciRootBridgeIo.h>
#include <Regs/HisiPcieV1RegOffset.h>
+#define INVALID_CAPABILITY_00 0x00
+#define INVALID_CAPABILITY_FF 0xFF
+#define PCI_CAPABILITY_POINTER_MASK 0xFC
STATIC
UINT64
@@ -37,6 +44,53 @@ GetPcieCfgAddress (
return Ecam + PCI_EXPRESS_LIB_ADDRESS (Bus, Device, Function, Reg);
}
+STATIC
+PCI_ROOT_BRIDGE_RESOURCE_APPETURE *
+GetAppetureByRootBridgeIo (
+ IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *RootBridge
+ )
+{
+ EFI_STATUS Status;
+ EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR *Configuration = NULL;
+ UINTN Hb;
+ UINTN Rb;
+
+ Status = RootBridge->Configuration (
+ RootBridge,
+ (VOID **)&Configuration
+ );
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_ERROR, "[%a:%d] RootBridgeIo->Configuration failed %r\n",
+ __FUNCTION__, __LINE__, Status));
+ return NULL;
+ };
+
+ while (Configuration->Desc == ACPI_ADDRESS_SPACE_DESCRIPTOR) {
+ if (Configuration->ResType == ACPI_ADDRESS_SPACE_TYPE_BUS) {
+ break;
+ }
+ Configuration++;
+ }
+
+ if (Configuration->Desc != ACPI_ADDRESS_SPACE_DESCRIPTOR) {
+ DEBUG ((DEBUG_ERROR, "[%a:%d] Can't find bus descriptor\n", __FUNCTION__, __LINE__));
+ return NULL;
+ }
+
+ for (Hb = 0; Hb < PCIE_MAX_HOSTBRIDGE; Hb++) {
+ for (Rb = 0; Rb < PCIE_MAX_ROOTBRIDGE; Rb++) {
+ if (RootBridge->SegmentNumber == mResAppeture[Hb][Rb].Segment &&
+ Configuration->AddrRangeMin >= mResAppeture[Hb][Rb].BusBase &&
+ Configuration->AddrRangeMax <= mResAppeture[Hb][Rb].BusLimit) {
+ return &mResAppeture[Hb][Rb];
+ }
+ }
+ }
+
+ DEBUG ((DEBUG_ERROR, "[%a:%d] Can't find PCI appeture\n", __FUNCTION__, __LINE__));
+ return NULL;
+}
+
STATIC
VOID
SetAtuConfig0RW (
@@ -183,3 +237,148 @@ PciInitPlatform (
return;
}
+STATIC
+BOOLEAN
+PcieCheckAriFwdEn (
+ UINTN PciBaseAddr
+ )
+{
+ UINT8 PciPrimaryStatus;
+ UINT8 CapabilityOffset;
+ UINT8 CapId;
+ UINT8 TempData;
+
+ PciPrimaryStatus = MmioRead16 (PciBaseAddr + PCI_PRIMARY_STATUS_OFFSET);
+
+ if (PciPrimaryStatus & EFI_PCI_STATUS_CAPABILITY) {
+ CapabilityOffset = MmioRead8 (PciBaseAddr + PCI_CAPBILITY_POINTER_OFFSET);
+ CapabilityOffset &= PCI_CAPABILITY_POINTER_MASK;
+
+ while ((CapabilityOffset != INVALID_CAPABILITY_00) && (CapabilityOffset != INVALID_CAPABILITY_FF)) {
+ CapId = MmioRead8 (PciBaseAddr + CapabilityOffset);
+ if (CapId == EFI_PCI_CAPABILITY_ID_PCIEXP) {
+ break;
+ }
+ CapabilityOffset = MmioRead8 (PciBaseAddr + CapabilityOffset + 1);
+ CapabilityOffset &= PCI_CAPABILITY_POINTER_MASK;
+ }
+ } else {
+ return FALSE;
+ }
+
+ if ((CapabilityOffset == INVALID_CAPABILITY_FF) || (CapabilityOffset == INVALID_CAPABILITY_00)) {
+ return FALSE;
+ }
+
+ TempData = MmioRead16 (PciBaseAddr + CapabilityOffset +
+ EFI_PCIE_CAPABILITY_DEVICE_CONTROL_2_OFFSET);
+ TempData &= EFI_PCIE_CAPABILITY_DEVICE_CAPABILITIES_2_ARI_FORWARDING;
+
+ if (TempData == EFI_PCIE_CAPABILITY_DEVICE_CAPABILITIES_2_ARI_FORWARDING) {
+ return TRUE;
+ } else {
+ return FALSE;
+ }
+}
+
+VOID
+EnlargeAtuConfig0 (
+ IN EFI_HANDLE HostBridge
+ )
+{
+ EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL *ResAlloc = NULL;
+ EFI_STATUS Status;
+ EFI_HANDLE RootBridgeHandle = NULL;
+ EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *RootBridgeIo = NULL;
+ PCI_ROOT_BRIDGE_RESOURCE_APPETURE *Appeture;
+ UINTN RbPciBase;
+ UINT64 MemLimit;
+
+ DEBUG ((DEBUG_INFO, "In Enlarge RP iATU Config 0.\n"));
+
+ Status = gBS->HandleProtocol (
+ HostBridge,
+ &gEfiPciHostBridgeResourceAllocationProtocolGuid,
+ (VOID **)&ResAlloc
+ );
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_ERROR, "[%a:%d] - HandleProtocol failed %r\n", __FUNCTION__,
+ __LINE__, Status));
+ return;
+ }
+
+ while (TRUE) {
+ Status = ResAlloc->GetNextRootBridge (
+ ResAlloc,
+ &RootBridgeHandle
+ );
+ if (EFI_ERROR (Status)) {
+ break;
+ }
+ Status = gBS->HandleProtocol (
+ RootBridgeHandle,
+ &gEfiPciRootBridgeIoProtocolGuid,
+ (VOID **)&RootBridgeIo
+ );
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_ERROR, "[%a:%d] - HandleProtocol failed %r\n", __FUNCTION__, __LINE__, Status));
+ // This should never happen so that it is a fatal error and we don't try
+ // to continue
+ break;
+ }
+
+ Appeture = GetAppetureByRootBridgeIo (RootBridgeIo);
+ if (Appeture == NULL) {
+ DEBUG ((DEBUG_ERROR, "[%a:%d] Get appeture failed\n", __FUNCTION__,
+ __LINE__));
+ continue;
+ }
+
+ RbPciBase = Appeture->RbPciBar;
+ // Those ARI FWD Enable Root Bridge, need enlarge iATU window.
+ if (PcieCheckAriFwdEn (RbPciBase)) {
+ MemLimit = GetPcieCfgAddress (Appeture->Ecam, Appeture->BusBase + 2, 0, 0, 0) - 1;
+ MmioWrite32 (RbPciBase + IATU_OFFSET + IATU_VIEW_POINT, 1);
+ MmioWrite32 (RbPciBase + IATU_OFFSET + IATU_REGION_BASE_LIMIT, (UINT32) MemLimit);
+ }
+ }
+}
+
+/*++
+
+Routine Description:
+
+ Perform Platform initialization by the phase indicated.
+
+Arguments:
+
+ HostBridge - The associated PCI host bridge handle.
+ Phase - The phase of the PCI controller enumeration.
+ ChipsetPhase - Defines the execution phase of the PCI chipset driver.
+
+Returns:
+
+--*/
+VOID
+EFIAPI
+PhaseNotifyPlatform (
+ IN EFI_HANDLE HostBridge,
+ IN EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PHASE Phase,
+ IN EFI_PCI_CHIPSET_EXECUTION_PHASE ChipsetPhase
+ )
+{
+ switch (Phase) {
+ case EfiPciHostBridgeEndEnumeration:
+ // Only do once
+ if (ChipsetPhase == ChipsetEntry) {
+ DEBUG ((DEBUG_INFO, "PCI end enumeration platform hook\n"));
+ EnlargeAtuConfig0 (HostBridge);
+ }
+ break;
+ default:
+ break;
+ }
+
+ return ;
+}
+
--
2.17.0
^ permalink raw reply related [flat|nested] 16+ messages in thread
* [PATCH edk2-platforms v1 07/13] Hisilicon/PlatformPciLib: add segment for each root bridge
2018-07-20 8:02 [PATCH edk2-platforms v1 00/13] Switching to generic PciHostBridge driver Ming Huang
` (5 preceding siblings ...)
2018-07-20 8:02 ` [PATCH edk2-platforms v1 06/13] Hisilicon/Pci: move EnlargeAtuConfig0() " Ming Huang
@ 2018-07-20 8:02 ` Ming Huang
2018-07-20 8:02 ` [PATCH edk2-platforms v1 08/13] Hisilicon: add PciHostBridgeLib Ming Huang
` (5 subsequent siblings)
12 siblings, 0 replies; 16+ messages in thread
From: Ming Huang @ 2018-07-20 8:02 UTC (permalink / raw)
To: leif.lindholm, linaro-uefi, edk2-devel, graeme.gregory
Cc: ard.biesheuvel, guoheyi, wanghuiqiang, huangming23, zhangjinsong2,
huangdaode, john.garry, Heyi Guo
From: Heyi Guo <heyi.guo@linaro.org>
This is to prepare for switching to generic PciHostBridge driver. We
are going to create a PciHostBridgeLib instance for D0x and fetch
PCI root bridge informance from PlatformPciLib, so we add Segment to
PCI_ROOT_BRIDGE_RESOURCE_APPETURE along with other PCI resource
information. Segment numbers are kept the same as ACPI MCFG.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Heyi Guo <heyi.guo@linaro.org>
---
Platform/Hisilicon/D03/Library/PlatformPciLib/PlatformPciLib.c | 8 ++++++++
Platform/Hisilicon/D05/Library/PlatformPciLib/PlatformPciLib.c | 16 ++++++++++++++++
Silicon/Hisilicon/Include/Library/PlatformPciLib.h | 1 +
3 files changed, 25 insertions(+)
diff --git a/Platform/Hisilicon/D03/Library/PlatformPciLib/PlatformPciLib.c b/Platform/Hisilicon/D03/Library/PlatformPciLib/PlatformPciLib.c
index c58118fe5e..3a770d17bb 100644
--- a/Platform/Hisilicon/D03/Library/PlatformPciLib/PlatformPciLib.c
+++ b/Platform/Hisilicon/D03/Library/PlatformPciLib/PlatformPciLib.c
@@ -28,6 +28,7 @@ PCI_ROOT_BRIDGE_RESOURCE_APPETURE mResAppeture[PCIE_MAX_HOSTBRIDGE][PCIE_MAX_RO
{// HostBridge 0
/* Port 0 */
{
+ 0, //Segment
PCI_HB0RB0_ECAM_BASE, //ecam
0, //BusBase
31, //BusLimit
@@ -44,6 +45,7 @@ PCI_ROOT_BRIDGE_RESOURCE_APPETURE mResAppeture[PCIE_MAX_HOSTBRIDGE][PCIE_MAX_RO
},
/* Port 1 */
{
+ 1, //Segment
PCI_HB0RB1_ECAM_BASE,//ecam
224, //BusBase
254, //BusLimit
@@ -59,6 +61,7 @@ PCI_ROOT_BRIDGE_RESOURCE_APPETURE mResAppeture[PCIE_MAX_HOSTBRIDGE][PCIE_MAX_RO
},
/* Port 2 */
{
+ 2, //Segment
PCI_HB0RB2_ECAM_BASE,
128, //BusBase
159, //BusLimit
@@ -75,6 +78,7 @@ PCI_ROOT_BRIDGE_RESOURCE_APPETURE mResAppeture[PCIE_MAX_HOSTBRIDGE][PCIE_MAX_RO
/* Port 3 */
{
+ 3, //Segment
PCI_HB0RB3_ECAM_BASE,
96, //BusBase
127, //BusLimit
@@ -92,6 +96,7 @@ PCI_ROOT_BRIDGE_RESOURCE_APPETURE mResAppeture[PCIE_MAX_HOSTBRIDGE][PCIE_MAX_RO
{// HostBridge 1
/* Port 0 */
{
+ 4, //Segment
PCI_HB1RB0_ECAM_BASE,
128, //BusBase
159, //BusLimit
@@ -107,6 +112,7 @@ PCI_ROOT_BRIDGE_RESOURCE_APPETURE mResAppeture[PCIE_MAX_HOSTBRIDGE][PCIE_MAX_RO
},
/* Port 1 */
{
+ 5, //Segment
PCI_HB1RB1_ECAM_BASE,
160, //BusBase
191, //BusLimit
@@ -122,6 +128,7 @@ PCI_ROOT_BRIDGE_RESOURCE_APPETURE mResAppeture[PCIE_MAX_HOSTBRIDGE][PCIE_MAX_RO
},
/* Port 2 */
{
+ 6, //Segment
PCI_HB1RB2_ECAM_BASE,
192, //BusBase
223, //BusLimit
@@ -138,6 +145,7 @@ PCI_ROOT_BRIDGE_RESOURCE_APPETURE mResAppeture[PCIE_MAX_HOSTBRIDGE][PCIE_MAX_RO
/* Port 3 */
{
+ 7, //Segment
PCI_HB1RB3_ECAM_BASE,
224, //BusBase
255, //BusLimit
diff --git a/Platform/Hisilicon/D05/Library/PlatformPciLib/PlatformPciLib.c b/Platform/Hisilicon/D05/Library/PlatformPciLib/PlatformPciLib.c
index c0b756ccfb..42bbdd8c98 100644
--- a/Platform/Hisilicon/D05/Library/PlatformPciLib/PlatformPciLib.c
+++ b/Platform/Hisilicon/D05/Library/PlatformPciLib/PlatformPciLib.c
@@ -29,6 +29,7 @@ PCI_ROOT_BRIDGE_RESOURCE_APPETURE mResAppeture[PCIE_MAX_HOSTBRIDGE][PCIE_MAX_RO
{// HostBridge 0
/* Port 0 */
{
+ 0, //Segment
PCI_HB0RB0_ECAM_BASE, //ecam
0x80, //BusBase
0x87, //BusLimit
@@ -44,6 +45,7 @@ PCI_ROOT_BRIDGE_RESOURCE_APPETURE mResAppeture[PCIE_MAX_HOSTBRIDGE][PCIE_MAX_RO
},
/* Port 1 */
{
+ 1, //Segment
PCI_HB0RB1_ECAM_BASE,//ecam
0x90, //BusBase
0x97, //BusLimit
@@ -59,6 +61,7 @@ PCI_ROOT_BRIDGE_RESOURCE_APPETURE mResAppeture[PCIE_MAX_HOSTBRIDGE][PCIE_MAX_RO
},
/* Port 2 */
{
+ 2, //Segment
PCI_HB0RB2_ECAM_BASE,
0xF8, //BusBase
0xFF, //BusLimit
@@ -75,6 +78,7 @@ PCI_ROOT_BRIDGE_RESOURCE_APPETURE mResAppeture[PCIE_MAX_HOSTBRIDGE][PCIE_MAX_RO
/* Port 3 */
{
+ 3, //Segment
PCI_HB0RB3_ECAM_BASE,
0xb0, //BusBase
0xb7, //BusLimit
@@ -90,6 +94,7 @@ PCI_ROOT_BRIDGE_RESOURCE_APPETURE mResAppeture[PCIE_MAX_HOSTBRIDGE][PCIE_MAX_RO
},
/* Port 4 */
{
+ 4, //Segment
PCI_HB0RB4_ECAM_BASE, //ecam
0x88, //BusBase
0x8f, //BusLimit
@@ -105,6 +110,7 @@ PCI_ROOT_BRIDGE_RESOURCE_APPETURE mResAppeture[PCIE_MAX_HOSTBRIDGE][PCIE_MAX_RO
},
/* Port 5 */
{
+ 5, //Segment
PCI_HB0RB5_ECAM_BASE,//ecam
0x78, //BusBase
0x7F, //BusLimit
@@ -120,6 +126,7 @@ PCI_ROOT_BRIDGE_RESOURCE_APPETURE mResAppeture[PCIE_MAX_HOSTBRIDGE][PCIE_MAX_RO
},
/* Port 6 */
{
+ 6, //Segment
PCI_HB0RB6_ECAM_BASE,
0xC0, //BusBase
0xC7, //BusLimit
@@ -136,6 +143,7 @@ PCI_ROOT_BRIDGE_RESOURCE_APPETURE mResAppeture[PCIE_MAX_HOSTBRIDGE][PCIE_MAX_RO
/* Port 7 */
{
+ 7, //Segment
PCI_HB0RB7_ECAM_BASE,
0x90, //BusBase
0x97, //BusLimit
@@ -153,6 +161,7 @@ PCI_ROOT_BRIDGE_RESOURCE_APPETURE mResAppeture[PCIE_MAX_HOSTBRIDGE][PCIE_MAX_RO
{// HostBridge 1
/* Port 0 */
{
+ 8, //Segment
PCI_HB1RB0_ECAM_BASE,
0x80, //BusBase
0x87, //BusLimit
@@ -168,6 +177,7 @@ PCI_ROOT_BRIDGE_RESOURCE_APPETURE mResAppeture[PCIE_MAX_HOSTBRIDGE][PCIE_MAX_RO
},
/* Port 1 */
{
+ 9, //Segment
PCI_HB1RB1_ECAM_BASE,
0x90, //BusBase
0x97, //BusLimit
@@ -183,6 +193,7 @@ PCI_ROOT_BRIDGE_RESOURCE_APPETURE mResAppeture[PCIE_MAX_HOSTBRIDGE][PCIE_MAX_RO
},
/* Port 2 */
{
+ 0xa, //Segment
PCI_HB1RB2_ECAM_BASE,
0x10, //BusBase
0x1f, //BusLimit
@@ -199,6 +210,7 @@ PCI_ROOT_BRIDGE_RESOURCE_APPETURE mResAppeture[PCIE_MAX_HOSTBRIDGE][PCIE_MAX_RO
/* Port 3 */
{
+ 0xb, //Segment
PCI_HB1RB3_ECAM_BASE,
0xb0, //BusBase
0xb7, //BusLimit
@@ -214,6 +226,7 @@ PCI_ROOT_BRIDGE_RESOURCE_APPETURE mResAppeture[PCIE_MAX_HOSTBRIDGE][PCIE_MAX_RO
},
/* Port 4 */
{
+ 0xc, //Segment
PCI_HB1RB4_ECAM_BASE,
0x20, //BusBase
0x2f, //BusLimit
@@ -229,6 +242,7 @@ PCI_ROOT_BRIDGE_RESOURCE_APPETURE mResAppeture[PCIE_MAX_HOSTBRIDGE][PCIE_MAX_RO
},
/* Port 5 */
{
+ 0xd, //Segment
PCI_HB1RB5_ECAM_BASE,
0x30, //BusBase
0x3f, //BusLimit
@@ -244,6 +258,7 @@ PCI_ROOT_BRIDGE_RESOURCE_APPETURE mResAppeture[PCIE_MAX_HOSTBRIDGE][PCIE_MAX_RO
},
/* Port 6 */
{
+ 0xe, //Segment
PCI_HB1RB6_ECAM_BASE,
0xa8, //BusBase
0xaf, //BusLimit
@@ -260,6 +275,7 @@ PCI_ROOT_BRIDGE_RESOURCE_APPETURE mResAppeture[PCIE_MAX_HOSTBRIDGE][PCIE_MAX_RO
/* Port 7 */
{
+ 0xf, //Segment
PCI_HB1RB7_ECAM_BASE,
0xb8, //BusBase
0xbf, //BusLimit
diff --git a/Silicon/Hisilicon/Include/Library/PlatformPciLib.h b/Silicon/Hisilicon/Include/Library/PlatformPciLib.h
index 9d28fec375..6725a547d5 100644
--- a/Silicon/Hisilicon/Include/Library/PlatformPciLib.h
+++ b/Silicon/Hisilicon/Include/Library/PlatformPciLib.h
@@ -190,6 +190,7 @@ extern UINT64 PCIE_ITS_1610[PCIE_MAX_HOSTBRIDGE][PCIE_MAX_ROOTBRIDGE];
typedef struct {
+ UINT32 Segment;
UINT64 Ecam;
UINT64 BusBase;
UINT64 BusLimit;
--
2.17.0
^ permalink raw reply related [flat|nested] 16+ messages in thread
* [PATCH edk2-platforms v1 08/13] Hisilicon: add PciHostBridgeLib
2018-07-20 8:02 [PATCH edk2-platforms v1 00/13] Switching to generic PciHostBridge driver Ming Huang
` (6 preceding siblings ...)
2018-07-20 8:02 ` [PATCH edk2-platforms v1 07/13] Hisilicon/PlatformPciLib: add segment for each root bridge Ming Huang
@ 2018-07-20 8:02 ` Ming Huang
2018-07-20 8:02 ` [PATCH edk2-platforms v1 09/13] Hisilicon: add PciCpuIo2Dxe Ming Huang
` (4 subsequent siblings)
12 siblings, 0 replies; 16+ messages in thread
From: Ming Huang @ 2018-07-20 8:02 UTC (permalink / raw)
To: leif.lindholm, linaro-uefi, edk2-devel, graeme.gregory
Cc: ard.biesheuvel, guoheyi, wanghuiqiang, huangming23, zhangjinsong2,
huangdaode, john.garry, Heyi Guo, Michael D Kinney
From: Heyi Guo <heyi.guo@linaro.org>
This is to prepare for switching to generic PciHostBridge, and
PciHostBridgeLib is needed by PciHostBridge driver.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Heyi Guo <heyi.guo@linaro.org>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
---
Platform/Hisilicon/Library/PciHostBridgeLib/PciHostBridgeLib.c | 304 ++++++++++++++++++++
Platform/Hisilicon/Library/PciHostBridgeLib/PciHostBridgeLib.inf | 51 ++++
2 files changed, 355 insertions(+)
diff --git a/Platform/Hisilicon/Library/PciHostBridgeLib/PciHostBridgeLib.c b/Platform/Hisilicon/Library/PciHostBridgeLib/PciHostBridgeLib.c
new file mode 100644
index 0000000000..6aff5cdd3d
--- /dev/null
+++ b/Platform/Hisilicon/Library/PciHostBridgeLib/PciHostBridgeLib.c
@@ -0,0 +1,304 @@
+/** @file
+ PCI Host Bridge Library instance for Hisilicon D0x
+
+ Copyright (c) 2018, Hisilicon Limited. All rights reserved.<BR>
+ Copyright (c) 2017 - 2018, Linaro Ltd. All rights reserved.<BR>
+
+ This program and the accompanying materials are licensed and made available
+ under the terms and conditions of the BSD License which accompanies this
+ distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php.
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, WITHOUT
+ WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+#include <PiDxe.h>
+#include <Library/BaseMemoryLib.h>
+#include <Library/DebugLib.h>
+#include <Library/DevicePathLib.h>
+#include <Library/IoLib.h>
+#include <Library/MemoryAllocationLib.h>
+#include <Library/OemMiscLib.h>
+#include <Library/PcdLib.h>
+#include <Library/PciHostBridgeLib.h>
+#include <Library/PlatformPciLib.h>
+
+#include <Protocol/PciHostBridgeResourceAllocation.h>
+#include <Protocol/PciRootBridgeIo.h>
+
+
+#pragma pack(1)
+typedef struct {
+ ACPI_HID_DEVICE_PATH AcpiDevicePath;
+ EFI_DEVICE_PATH_PROTOCOL EndDevicePath;
+} EFI_PCI_ROOT_BRIDGE_DEVICE_PATH;
+#pragma pack ()
+
+STATIC EFI_PCI_ROOT_BRIDGE_DEVICE_PATH mEfiPciRootBridgeDevicePath = {
+ {
+ {
+ ACPI_DEVICE_PATH,
+ ACPI_DP,
+ {
+ (UINT8) (sizeof(ACPI_HID_DEVICE_PATH)),
+ (UINT8) ((sizeof(ACPI_HID_DEVICE_PATH)) >> 8)
+ }
+ },
+ EISA_PNP_ID(0x0A03), // PCI
+ 0
+ }, {
+ END_DEVICE_PATH_TYPE,
+ END_ENTIRE_DEVICE_PATH_SUBTYPE,
+ {
+ END_DEVICE_PATH_LENGTH,
+ 0
+ }
+ }
+};
+
+STATIC PCI_ROOT_BRIDGE mRootBridgeTemplate = {
+ 0, // Segment
+ 0, // Supports
+ 0, // Attributes
+ TRUE, // DmaAbove4G
+ FALSE, // NoExtendedConfigSpace
+ FALSE, // ResourceAssigned
+ EFI_PCI_HOST_BRIDGE_COMBINE_MEM_PMEM | // AllocationAttributes
+ EFI_PCI_HOST_BRIDGE_MEM64_DECODE,
+ {
+ // Bus
+ 0,
+ 0
+ }, {
+ // Io
+ 0,
+ 0,
+ 0
+ }, {
+ // Mem
+ MAX_UINT64,
+ 0,
+ 0
+ }, {
+ // MemAbove4G
+ MAX_UINT64,
+ 0,
+ 0
+ }, {
+ // PMem
+ MAX_UINT64,
+ 0,
+ 0
+ }, {
+ // PMemAbove4G
+ MAX_UINT64,
+ 0,
+ 0
+ },
+ (EFI_DEVICE_PATH_PROTOCOL *)&mEfiPciRootBridgeDevicePath
+};
+
+STATIC
+EFI_STATUS
+ConstructRootBridge (
+ PCI_ROOT_BRIDGE *Bridge,
+ PCI_ROOT_BRIDGE_RESOURCE_APPETURE *Appeture
+ )
+{
+ EFI_PCI_ROOT_BRIDGE_DEVICE_PATH *DevicePath;
+ CopyMem (Bridge, &mRootBridgeTemplate, sizeof *Bridge);
+ Bridge->Segment = Appeture->Segment;
+ Bridge->Bus.Base = Appeture->BusBase;
+ Bridge->Bus.Limit = Appeture->BusLimit;
+ Bridge->Io.Base = Appeture->IoBase;
+ // According to UEFI 2.7, device address = host address + translation
+ Bridge->Io.Translation = Appeture->IoBase - Appeture->CpuIoRegionBase;
+ // IoLimit is actually an address in CPU view
+ // TODO: improve the definition of PCI_ROOT_BRIDGE_RESOURCE_APPETURE
+ Bridge->Io.Limit = Appeture->IoLimit + Bridge->Io.Translation;
+ if (Appeture->PciRegionBase > MAX_UINT32) {
+ Bridge->MemAbove4G.Base = Appeture->PciRegionBase;
+ Bridge->MemAbove4G.Limit = Appeture->PciRegionLimit;
+ Bridge->MemAbove4G.Translation = Appeture->PciRegionBase - Appeture->CpuMemRegionBase;
+ } else {
+ Bridge->Mem.Base = Appeture->PciRegionBase;
+ Bridge->Mem.Limit = Appeture->PciRegionLimit;
+ Bridge->Mem.Translation = Appeture->PciRegionBase - Appeture->CpuMemRegionBase;
+ }
+
+ DevicePath = AllocateCopyPool(sizeof mEfiPciRootBridgeDevicePath, &mEfiPciRootBridgeDevicePath);
+ if (DevicePath == NULL) {
+ DEBUG ((DEBUG_ERROR, "[%a]:[%dL] AllocatePool failed!\n", __FUNCTION__, __LINE__));
+ return EFI_OUT_OF_RESOURCES;
+ }
+
+ DevicePath->AcpiDevicePath.UID = Bridge->Segment;
+ Bridge->DevicePath = (EFI_DEVICE_PATH_PROTOCOL *)DevicePath;
+ return EFI_SUCCESS;
+}
+
+/**
+ Return all the root bridge instances in an array.
+
+ @param Count Return the count of root bridge instances.
+
+ @return All the root bridge instances in an array.
+ The array should be passed into PciHostBridgeFreeRootBridges()
+ when it's not used.
+**/
+PCI_ROOT_BRIDGE *
+EFIAPI
+PciHostBridgeGetRootBridges (
+ UINTN *Count
+ )
+{
+ EFI_STATUS Status;
+ UINTN Loop1;
+ UINTN Loop2;
+ UINT32 PcieRootBridgeMask;
+ UINTN RootBridgeCount = 0;
+ PCI_ROOT_BRIDGE *Bridges;
+
+ // Set default value to 0 in case we got any error.
+ *Count = 0;
+
+
+ if (!OemIsMpBoot())
+ {
+ PcieRootBridgeMask = PcdGet32(PcdPcieRootBridgeMask);
+ }
+ else
+ {
+ PcieRootBridgeMask = PcdGet32(PcdPcieRootBridgeMask2P);
+ }
+
+ for (Loop1 = 0; Loop1 < PCIE_MAX_HOSTBRIDGE; Loop1++) {
+ if (((PcieRootBridgeMask >> (PCIE_MAX_ROOTBRIDGE * Loop1)) & 0xFF ) == 0) {
+ continue;
+ }
+
+ for (Loop2 = 0; Loop2 < PCIE_MAX_ROOTBRIDGE; Loop2++) {
+ if (!(((PcieRootBridgeMask >> (PCIE_MAX_ROOTBRIDGE * Loop1)) >> Loop2 ) & 0x01)) {
+ continue;
+ }
+ RootBridgeCount++;
+ }
+ }
+
+ Bridges = AllocatePool (RootBridgeCount * sizeof *Bridges);
+ if (Bridges == NULL) {
+ DEBUG ((DEBUG_ERROR, "[%a:%d] - AllocatePool failed!\n", __FUNCTION__, __LINE__));
+ return NULL;
+ }
+
+ for (Loop1 = 0; Loop1 < PCIE_MAX_HOSTBRIDGE; Loop1++) {
+ if (((PcieRootBridgeMask >> (PCIE_MAX_ROOTBRIDGE * Loop1)) & 0xFF ) == 0) {
+ continue;
+ }
+
+ for (Loop2 = 0; Loop2 < PCIE_MAX_ROOTBRIDGE; Loop2++) {
+ if (!(((PcieRootBridgeMask >> (PCIE_MAX_ROOTBRIDGE * Loop1)) >> Loop2 ) & 0x01)) {
+ continue;
+ }
+ Status = ConstructRootBridge (&Bridges[*Count], &mResAppeture[Loop1][Loop2]);
+ if (EFI_ERROR (Status)) {
+ continue;
+ }
+ (*Count)++;
+ }
+ }
+
+ if (*Count == 0) {
+ FreePool (Bridges);
+ return NULL;
+ }
+ return Bridges;
+}
+
+/**
+ Free the root bridge instances array returned from PciHostBridgeGetRootBridges().
+
+ @param Bridges The root bridge instances array.
+ @param Count The count of the array.
+**/
+VOID
+EFIAPI
+PciHostBridgeFreeRootBridges (
+ PCI_ROOT_BRIDGE *Bridges,
+ UINTN Count
+ )
+{
+ UINTN Index;
+
+ for (Index = 0; Index < Count; Index++) {
+ FreePool (Bridges[Index].DevicePath);
+ }
+
+ if (Bridges != NULL) {
+ FreePool (Bridges);
+ }
+}
+
+
+#ifndef MDEPKG_NDEBUG
+STATIC CONST CHAR16 mPciHostBridgeLibAcpiAddressSpaceTypeStr[][4] = {
+ L"Mem", L"I/O", L"Bus"
+};
+#endif
+
+/**
+ Inform the platform that the resource conflict happens.
+
+ @param HostBridgeHandle Handle of the Host Bridge.
+ @param Configuration Pointer to PCI I/O and PCI memory resource
+ descriptors. The Configuration contains the resources
+ for all the root bridges. The resource for each root
+ bridge is terminated with END descriptor and an
+ additional END is appended indicating the end of the
+ entire resources. The resource descriptor field
+ values follow the description in
+ EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL
+ .SubmitResources().
+**/
+VOID
+EFIAPI
+PciHostBridgeResourceConflict (
+ EFI_HANDLE HostBridgeHandle,
+ VOID *Configuration
+ )
+{
+ EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR *Descriptor;
+ UINTN RootBridgeIndex;
+ DEBUG ((DEBUG_ERROR, "PciHostBridge: Resource conflict happens!\n"));
+
+ RootBridgeIndex = 0;
+ Descriptor = (EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR *) Configuration;
+ while (Descriptor->Desc == ACPI_ADDRESS_SPACE_DESCRIPTOR) {
+ DEBUG ((DEBUG_ERROR, "RootBridge[%d]:\n", RootBridgeIndex++));
+ for (; Descriptor->Desc == ACPI_ADDRESS_SPACE_DESCRIPTOR; Descriptor++) {
+ ASSERT (Descriptor->ResType <
+ ARRAY_SIZE (mPciHostBridgeLibAcpiAddressSpaceTypeStr)
+ );
+ DEBUG ((DEBUG_ERROR, " %s: Length/Alignment = 0x%lx / 0x%lx\n",
+ mPciHostBridgeLibAcpiAddressSpaceTypeStr[Descriptor->ResType],
+ Descriptor->AddrLen, Descriptor->AddrRangeMax
+ ));
+ if (Descriptor->ResType == ACPI_ADDRESS_SPACE_TYPE_MEM) {
+ DEBUG ((DEBUG_ERROR, " Granularity/SpecificFlag = %ld / %02x%s\n",
+ Descriptor->AddrSpaceGranularity, Descriptor->SpecificFlag,
+ ((Descriptor->SpecificFlag &
+ EFI_ACPI_MEMORY_RESOURCE_SPECIFIC_FLAG_CACHEABLE_PREFETCHABLE
+ ) != 0) ? L" (Prefetchable)" : L""
+ ));
+ }
+ }
+ //
+ // Skip the END descriptor for root bridge
+ //
+ ASSERT (Descriptor->Desc == ACPI_END_TAG_DESCRIPTOR);
+ Descriptor = (EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR *)(
+ (EFI_ACPI_END_TAG_DESCRIPTOR *)Descriptor + 1
+ );
+ }
+}
diff --git a/Platform/Hisilicon/Library/PciHostBridgeLib/PciHostBridgeLib.inf b/Platform/Hisilicon/Library/PciHostBridgeLib/PciHostBridgeLib.inf
new file mode 100644
index 0000000000..dd451cff33
--- /dev/null
+++ b/Platform/Hisilicon/Library/PciHostBridgeLib/PciHostBridgeLib.inf
@@ -0,0 +1,51 @@
+## @file
+# PCI Host Bridge Library instance for Hisilicon D0x
+#
+# Copyright (c) 2018, Hisilicon Limited. All rights reserved.<BR>
+# Copyright (c) 2017 - 2018, Linaro Ltd. All rights reserved.<BR>
+#
+# This program and the accompanying materials are licensed and made available
+# under the terms and conditions of the BSD License which accompanies this
+# distribution. The full text of the license may be found at
+# http://opensource.org/licenses/bsd-license.php
+# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR
+# IMPLIED.
+#
+#
+##
+
+[Defines]
+ INF_VERSION = 0x0001000A
+ BASE_NAME = PciHostBridgeLib
+ FILE_GUID = e5c91e8a-0b2b-11e8-9533-286ed489ee9b
+ MODULE_TYPE = DXE_DRIVER
+ VERSION_STRING = 1.0
+ LIBRARY_CLASS = PciHostBridgeLib|DXE_DRIVER
+
+#
+# The following information is for reference only and not required by the build
+# tools.
+#
+# VALID_ARCHITECTURES = AARCH64 ARM
+#
+
+[Sources]
+ PciHostBridgeLib.c
+
+[Packages]
+ MdeModulePkg/MdeModulePkg.dec
+ MdePkg/MdePkg.dec
+ Silicon/Hisilicon/HisiPkg.dec
+
+[LibraryClasses]
+ BaseLib
+ BaseMemoryLib
+ DebugLib
+ DevicePathLib
+ MemoryAllocationLib
+ OemMiscLib
+
+[Pcd]
+ gHisiTokenSpaceGuid.PcdPcieRootBridgeMask
+ gHisiTokenSpaceGuid.PcdPcieRootBridgeMask2P
--
2.17.0
^ permalink raw reply related [flat|nested] 16+ messages in thread
* [PATCH edk2-platforms v1 09/13] Hisilicon: add PciCpuIo2Dxe
2018-07-20 8:02 [PATCH edk2-platforms v1 00/13] Switching to generic PciHostBridge driver Ming Huang
` (7 preceding siblings ...)
2018-07-20 8:02 ` [PATCH edk2-platforms v1 08/13] Hisilicon: add PciHostBridgeLib Ming Huang
@ 2018-07-20 8:02 ` Ming Huang
2018-07-20 10:31 ` Ard Biesheuvel
2018-07-20 8:02 ` [PATCH edk2-platforms v1 10/13] Hisilicon: add PciSegmentLib for Hi161x Ming Huang
` (3 subsequent siblings)
12 siblings, 1 reply; 16+ messages in thread
From: Ming Huang @ 2018-07-20 8:02 UTC (permalink / raw)
To: leif.lindholm, linaro-uefi, edk2-devel, graeme.gregory
Cc: ard.biesheuvel, guoheyi, wanghuiqiang, huangming23, zhangjinsong2,
huangdaode, john.garry, Heyi Guo, Michael D Kinney
From: Heyi Guo <heyi.guo@linaro.org>
This is to prepare for switching to generic PciHostBridge, and
CpuIo2Dxe is needed by generic PciHostBridge driver.
The driver is copied from ArmPkg/Drivers/ArmPciCpuIo2Dxe and changed
for D0x.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Heyi Guo <heyi.guo@linaro.org>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
---
Silicon/Hisilicon/Drivers/ArmPciCpuIo2Dxe/ArmPciCpuIo2Dxe.c | 557 ++++++++++++++++++++
Silicon/Hisilicon/Drivers/ArmPciCpuIo2Dxe/ArmPciCpuIo2Dxe.inf | 48 ++
2 files changed, 605 insertions(+)
diff --git a/Silicon/Hisilicon/Drivers/ArmPciCpuIo2Dxe/ArmPciCpuIo2Dxe.c b/Silicon/Hisilicon/Drivers/ArmPciCpuIo2Dxe/ArmPciCpuIo2Dxe.c
new file mode 100644
index 0000000000..8426c5935c
--- /dev/null
+++ b/Silicon/Hisilicon/Drivers/ArmPciCpuIo2Dxe/ArmPciCpuIo2Dxe.c
@@ -0,0 +1,557 @@
+/** @file
+ Produces the CPU I/O 2 Protocol.
+
+Copyright (c) 2009 - 2012, Intel Corporation. All rights reserved.<BR>
+Copyright (c) 2016 - 2018, Linaro Ltd. All rights reserved.<BR>
+Copyright (c) 2018, Hisilicon Ltd. All rights reserved.<BR>
+
+This program and the accompanying materials
+are licensed and made available under the terms and conditions of the BSD License
+which accompanies this distribution. The full text of the license may be found at
+http://opensource.org/licenses/bsd-license.php
+
+THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+#include <PiDxe.h>
+
+#include <Protocol/CpuIo2.h>
+
+#include <Library/BaseLib.h>
+#include <Library/DebugLib.h>
+#include <Library/IoLib.h>
+#include <Library/PcdLib.h>
+#include <Library/UefiBootServicesTableLib.h>
+
+// The translated IO PORT address is already a MMIO address, so we make it the
+// same as memory address for range check.
+#define MAX_IO_PORT_ADDRESS MAX_ADDRESS
+
+//
+// Lookup table for increment values based on transfer widths
+//
+STATIC CONST UINT8 mInStride[] = {
+ 1, // EfiCpuIoWidthUint8
+ 2, // EfiCpuIoWidthUint16
+ 4, // EfiCpuIoWidthUint32
+ 8, // EfiCpuIoWidthUint64
+ 0, // EfiCpuIoWidthFifoUint8
+ 0, // EfiCpuIoWidthFifoUint16
+ 0, // EfiCpuIoWidthFifoUint32
+ 0, // EfiCpuIoWidthFifoUint64
+ 1, // EfiCpuIoWidthFillUint8
+ 2, // EfiCpuIoWidthFillUint16
+ 4, // EfiCpuIoWidthFillUint32
+ 8 // EfiCpuIoWidthFillUint64
+};
+
+//
+// Lookup table for increment values based on transfer widths
+//
+STATIC CONST UINT8 mOutStride[] = {
+ 1, // EfiCpuIoWidthUint8
+ 2, // EfiCpuIoWidthUint16
+ 4, // EfiCpuIoWidthUint32
+ 8, // EfiCpuIoWidthUint64
+ 1, // EfiCpuIoWidthFifoUint8
+ 2, // EfiCpuIoWidthFifoUint16
+ 4, // EfiCpuIoWidthFifoUint32
+ 8, // EfiCpuIoWidthFifoUint64
+ 0, // EfiCpuIoWidthFillUint8
+ 0, // EfiCpuIoWidthFillUint16
+ 0, // EfiCpuIoWidthFillUint32
+ 0 // EfiCpuIoWidthFillUint64
+};
+
+/**
+ Check parameters to a CPU I/O 2 Protocol service request.
+
+ The I/O operations are carried out exactly as requested. The caller is responsible
+ for satisfying any alignment and I/O width restrictions that a PI System on a
+ platform might require. For example on some platforms, width requests of
+ EfiCpuIoWidthUint64 do not work. Misaligned buffers, on the other hand, will
+ be handled by the driver.
+
+ @param[in] MmioOperation TRUE for an MMIO operation, FALSE for I/O Port operation.
+ @param[in] Width Signifies the width of the I/O or Memory operation.
+ @param[in] Address The base address of the I/O operation.
+ @param[in] Count The number of I/O operations to perform. The number of
+ bytes moved is Width size * Count, starting at Address.
+ @param[in] Buffer For read operations, the destination buffer to store the results.
+ For write operations, the source buffer from which to write data.
+
+ @retval EFI_SUCCESS The parameters for this request pass the checks.
+ @retval EFI_INVALID_PARAMETER Width is invalid for this PI system.
+ @retval EFI_INVALID_PARAMETER Buffer is NULL.
+ @retval EFI_UNSUPPORTED The Buffer is not aligned for the given Width.
+ @retval EFI_UNSUPPORTED The address range specified by Address, Width,
+ and Count is not valid for this PI system.
+
+**/
+STATIC
+EFI_STATUS
+CpuIoCheckParameter (
+ IN BOOLEAN MmioOperation,
+ IN EFI_CPU_IO_PROTOCOL_WIDTH Width,
+ IN UINT64 Address,
+ IN UINTN Count,
+ IN VOID *Buffer
+ )
+{
+ UINT64 MaxCount;
+ UINT64 Limit;
+
+ //
+ // Check to see if Buffer is NULL
+ //
+ if (Buffer == NULL) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ //
+ // Check to see if Width is in the valid range
+ //
+ if ((UINT32)Width >= EfiCpuIoWidthMaximum) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ //
+ // For FIFO type, the target address won't increase during the access,
+ // so treat Count as 1
+ //
+ if (Width >= EfiCpuIoWidthFifoUint8 && Width <= EfiCpuIoWidthFifoUint64) {
+ Count = 1;
+ }
+
+ //
+ // Check to see if Width is in the valid range for I/O Port operations
+ //
+ Width = (EFI_CPU_IO_PROTOCOL_WIDTH) (Width & 0x03);
+ if (!MmioOperation && (Width == EfiCpuIoWidthUint64)) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ //
+ // Check to see if Address is aligned
+ //
+ if ((Address & (UINT64)(mInStride[Width] - 1)) != 0) {
+ return EFI_UNSUPPORTED;
+ }
+
+ //
+ // Check to see if any address associated with this transfer exceeds the maximum
+ // allowed address. The maximum address implied by the parameters passed in is
+ // Address + Size * Count. If the following condition is met, then the transfer
+ // is not supported.
+ //
+ // Address + Size * Count > (MmioOperation ? MAX_ADDRESS : MAX_IO_PORT_ADDRESS) + 1
+ //
+ // Since MAX_ADDRESS can be the maximum integer value supported by the CPU and Count
+ // can also be the maximum integer value supported by the CPU, this range
+ // check must be adjusted to avoid all oveflow conditions.
+ //
+ // The following form of the range check is equivalent but assumes that
+ // MAX_ADDRESS and MAX_IO_PORT_ADDRESS are of the form (2^n - 1).
+ //
+ Limit = (MmioOperation ? MAX_ADDRESS : MAX_IO_PORT_ADDRESS);
+ if (Count == 0) {
+ if (Address > Limit) {
+ return EFI_UNSUPPORTED;
+ }
+ } else {
+ MaxCount = RShiftU64 (Limit, Width);
+ if (MaxCount < (Count - 1)) {
+ return EFI_UNSUPPORTED;
+ }
+ if (Address > LShiftU64 (MaxCount - Count + 1, Width)) {
+ return EFI_UNSUPPORTED;
+ }
+ }
+
+ //
+ // Check to see if Buffer is aligned
+ //
+ if (((UINTN)Buffer & ((MIN (sizeof (UINTN), mInStride[Width]) - 1))) != 0) {
+ return EFI_UNSUPPORTED;
+ }
+
+ return EFI_SUCCESS;
+}
+
+/**
+ Reads memory-mapped registers.
+
+ The I/O operations are carried out exactly as requested. The caller is responsible
+ for satisfying any alignment and I/O width restrictions that a PI System on a
+ platform might require. For example on some platforms, width requests of
+ EfiCpuIoWidthUint64 do not work. Misaligned buffers, on the other hand, will
+ be handled by the driver.
+
+ If Width is EfiCpuIoWidthUint8, EfiCpuIoWidthUint16, EfiCpuIoWidthUint32,
+ or EfiCpuIoWidthUint64, then both Address and Buffer are incremented for
+ each of the Count operations that is performed.
+
+ If Width is EfiCpuIoWidthFifoUint8, EfiCpuIoWidthFifoUint16,
+ EfiCpuIoWidthFifoUint32, or EfiCpuIoWidthFifoUint64, then only Buffer is
+ incremented for each of the Count operations that is performed. The read or
+ write operation is performed Count times on the same Address.
+
+ If Width is EfiCpuIoWidthFillUint8, EfiCpuIoWidthFillUint16,
+ EfiCpuIoWidthFillUint32, or EfiCpuIoWidthFillUint64, then only Address is
+ incremented for each of the Count operations that is performed. The read or
+ write operation is performed Count times from the first element of Buffer.
+
+ @param[in] This A pointer to the EFI_CPU_IO2_PROTOCOL instance.
+ @param[in] Width Signifies the width of the I/O or Memory operation.
+ @param[in] Address The base address of the I/O operation.
+ @param[in] Count The number of I/O operations to perform. The number of
+ bytes moved is Width size * Count, starting at Address.
+ @param[out] Buffer For read operations, the destination buffer to store the results.
+ For write operations, the source buffer from which to write data.
+
+ @retval EFI_SUCCESS The data was read from or written to the PI system.
+ @retval EFI_INVALID_PARAMETER Width is invalid for this PI system.
+ @retval EFI_INVALID_PARAMETER Buffer is NULL.
+ @retval EFI_UNSUPPORTED The Buffer is not aligned for the given Width.
+ @retval EFI_UNSUPPORTED The address range specified by Address, Width,
+ and Count is not valid for this PI system.
+
+**/
+STATIC
+EFI_STATUS
+EFIAPI
+CpuMemoryServiceRead (
+ IN EFI_CPU_IO2_PROTOCOL *This,
+ IN EFI_CPU_IO_PROTOCOL_WIDTH Width,
+ IN UINT64 Address,
+ IN UINTN Count,
+ OUT VOID *Buffer
+ )
+{
+ EFI_STATUS Status;
+ UINT8 InStride;
+ UINT8 OutStride;
+ EFI_CPU_IO_PROTOCOL_WIDTH OperationWidth;
+ UINT8 *Uint8Buffer;
+
+ Status = CpuIoCheckParameter (TRUE, Width, Address, Count, Buffer);
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+
+ //
+ // Select loop based on the width of the transfer
+ //
+ InStride = mInStride[Width];
+ OutStride = mOutStride[Width];
+ OperationWidth = (EFI_CPU_IO_PROTOCOL_WIDTH) (Width & 0x03);
+ for (Uint8Buffer = Buffer; Count > 0; Address += InStride, Uint8Buffer += OutStride, Count--) {
+ if (OperationWidth == EfiCpuIoWidthUint8) {
+ *Uint8Buffer = MmioRead8 ((UINTN)Address);
+ } else if (OperationWidth == EfiCpuIoWidthUint16) {
+ *((UINT16 *)Uint8Buffer) = MmioRead16 ((UINTN)Address);
+ } else if (OperationWidth == EfiCpuIoWidthUint32) {
+ *((UINT32 *)Uint8Buffer) = MmioRead32 ((UINTN)Address);
+ } else if (OperationWidth == EfiCpuIoWidthUint64) {
+ *((UINT64 *)Uint8Buffer) = MmioRead64 ((UINTN)Address);
+ }
+ }
+ return EFI_SUCCESS;
+}
+
+/**
+ Writes memory-mapped registers.
+
+ The I/O operations are carried out exactly as requested. The caller is responsible
+ for satisfying any alignment and I/O width restrictions that a PI System on a
+ platform might require. For example on some platforms, width requests of
+ EfiCpuIoWidthUint64 do not work. Misaligned buffers, on the other hand, will
+ be handled by the driver.
+
+ If Width is EfiCpuIoWidthUint8, EfiCpuIoWidthUint16, EfiCpuIoWidthUint32,
+ or EfiCpuIoWidthUint64, then both Address and Buffer are incremented for
+ each of the Count operations that is performed.
+
+ If Width is EfiCpuIoWidthFifoUint8, EfiCpuIoWidthFifoUint16,
+ EfiCpuIoWidthFifoUint32, or EfiCpuIoWidthFifoUint64, then only Buffer is
+ incremented for each of the Count operations that is performed. The read or
+ write operation is performed Count times on the same Address.
+
+ If Width is EfiCpuIoWidthFillUint8, EfiCpuIoWidthFillUint16,
+ EfiCpuIoWidthFillUint32, or EfiCpuIoWidthFillUint64, then only Address is
+ incremented for each of the Count operations that is performed. The read or
+ write operation is performed Count times from the first element of Buffer.
+
+ @param[in] This A pointer to the EFI_CPU_IO2_PROTOCOL instance.
+ @param[in] Width Signifies the width of the I/O or Memory operation.
+ @param[in] Address The base address of the I/O operation.
+ @param[in] Count The number of I/O operations to perform. The number of
+ bytes moved is Width size * Count, starting at Address.
+ @param[in] Buffer For read operations, the destination buffer to store the results.
+ For write operations, the source buffer from which to write data.
+
+ @retval EFI_SUCCESS The data was read from or written to the PI system.
+ @retval EFI_INVALID_PARAMETER Width is invalid for this PI system.
+ @retval EFI_INVALID_PARAMETER Buffer is NULL.
+ @retval EFI_UNSUPPORTED The Buffer is not aligned for the given Width.
+ @retval EFI_UNSUPPORTED The address range specified by Address, Width,
+ and Count is not valid for this PI system.
+
+**/
+STATIC
+EFI_STATUS
+EFIAPI
+CpuMemoryServiceWrite (
+ IN EFI_CPU_IO2_PROTOCOL *This,
+ IN EFI_CPU_IO_PROTOCOL_WIDTH Width,
+ IN UINT64 Address,
+ IN UINTN Count,
+ IN VOID *Buffer
+ )
+{
+ EFI_STATUS Status;
+ UINT8 InStride;
+ UINT8 OutStride;
+ EFI_CPU_IO_PROTOCOL_WIDTH OperationWidth;
+ UINT8 *Uint8Buffer;
+
+ Status = CpuIoCheckParameter (TRUE, Width, Address, Count, Buffer);
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+
+ //
+ // Select loop based on the width of the transfer
+ //
+ InStride = mInStride[Width];
+ OutStride = mOutStride[Width];
+ OperationWidth = (EFI_CPU_IO_PROTOCOL_WIDTH) (Width & 0x03);
+ for (Uint8Buffer = Buffer; Count > 0; Address += InStride, Uint8Buffer += OutStride, Count--) {
+ if (OperationWidth == EfiCpuIoWidthUint8) {
+ MmioWrite8 ((UINTN)Address, *Uint8Buffer);
+ } else if (OperationWidth == EfiCpuIoWidthUint16) {
+ MmioWrite16 ((UINTN)Address, *((UINT16 *)Uint8Buffer));
+ } else if (OperationWidth == EfiCpuIoWidthUint32) {
+ MmioWrite32 ((UINTN)Address, *((UINT32 *)Uint8Buffer));
+ } else if (OperationWidth == EfiCpuIoWidthUint64) {
+ MmioWrite64 ((UINTN)Address, *((UINT64 *)Uint8Buffer));
+ }
+ }
+ return EFI_SUCCESS;
+}
+
+/**
+ Reads I/O registers.
+
+ The I/O operations are carried out exactly as requested. The caller is responsible
+ for satisfying any alignment and I/O width restrictions that a PI System on a
+ platform might require. For example on some platforms, width requests of
+ EfiCpuIoWidthUint64 do not work. Misaligned buffers, on the other hand, will
+ be handled by the driver.
+
+ If Width is EfiCpuIoWidthUint8, EfiCpuIoWidthUint16, EfiCpuIoWidthUint32,
+ or EfiCpuIoWidthUint64, then both Address and Buffer are incremented for
+ each of the Count operations that is performed.
+
+ If Width is EfiCpuIoWidthFifoUint8, EfiCpuIoWidthFifoUint16,
+ EfiCpuIoWidthFifoUint32, or EfiCpuIoWidthFifoUint64, then only Buffer is
+ incremented for each of the Count operations that is performed. The read or
+ write operation is performed Count times on the same Address.
+
+ If Width is EfiCpuIoWidthFillUint8, EfiCpuIoWidthFillUint16,
+ EfiCpuIoWidthFillUint32, or EfiCpuIoWidthFillUint64, then only Address is
+ incremented for each of the Count operations that is performed. The read or
+ write operation is performed Count times from the first element of Buffer.
+
+ @param[in] This A pointer to the EFI_CPU_IO2_PROTOCOL instance.
+ @param[in] Width Signifies the width of the I/O or Memory operation.
+ @param[in] Address The base address of the I/O operation.
+ @param[in] Count The number of I/O operations to perform. The number of
+ bytes moved is Width size * Count, starting at Address.
+ @param[out] Buffer For read operations, the destination buffer to store the results.
+ For write operations, the source buffer from which to write data.
+
+ @retval EFI_SUCCESS The data was read from or written to the PI system.
+ @retval EFI_INVALID_PARAMETER Width is invalid for this PI system.
+ @retval EFI_INVALID_PARAMETER Buffer is NULL.
+ @retval EFI_UNSUPPORTED The Buffer is not aligned for the given Width.
+ @retval EFI_UNSUPPORTED The address range specified by Address, Width,
+ and Count is not valid for this PI system.
+
+**/
+STATIC
+EFI_STATUS
+EFIAPI
+CpuIoServiceRead (
+ IN EFI_CPU_IO2_PROTOCOL *This,
+ IN EFI_CPU_IO_PROTOCOL_WIDTH Width,
+ IN UINT64 Address,
+ IN UINTN Count,
+ OUT VOID *Buffer
+ )
+{
+ EFI_STATUS Status;
+ UINT8 InStride;
+ UINT8 OutStride;
+ EFI_CPU_IO_PROTOCOL_WIDTH OperationWidth;
+ UINT8 *Uint8Buffer;
+
+ Status = CpuIoCheckParameter (FALSE, Width, Address, Count, Buffer);
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+
+ //
+ // Select loop based on the width of the transfer
+ //
+ InStride = mInStride[Width];
+ OutStride = mOutStride[Width];
+ OperationWidth = (EFI_CPU_IO_PROTOCOL_WIDTH) (Width & 0x03);
+
+ // Assuming address has already been translated into MMIO address by PCI host
+ // bridge driver, so we call MmioRead/Write directly.
+ for (Uint8Buffer = Buffer; Count > 0; Address += InStride, Uint8Buffer += OutStride, Count--) {
+ if (OperationWidth == EfiCpuIoWidthUint8) {
+ *Uint8Buffer = MmioRead8 ((UINTN)Address);
+ } else if (OperationWidth == EfiCpuIoWidthUint16) {
+ *((UINT16 *)Uint8Buffer) = MmioRead16 ((UINTN)Address);
+ } else if (OperationWidth == EfiCpuIoWidthUint32) {
+ *((UINT32 *)Uint8Buffer) = MmioRead32 ((UINTN)Address);
+ }
+ }
+
+ return EFI_SUCCESS;
+}
+
+/**
+ Write I/O registers.
+
+ The I/O operations are carried out exactly as requested. The caller is responsible
+ for satisfying any alignment and I/O width restrictions that a PI System on a
+ platform might require. For example on some platforms, width requests of
+ EfiCpuIoWidthUint64 do not work. Misaligned buffers, on the other hand, will
+ be handled by the driver.
+
+ If Width is EfiCpuIoWidthUint8, EfiCpuIoWidthUint16, EfiCpuIoWidthUint32,
+ or EfiCpuIoWidthUint64, then both Address and Buffer are incremented for
+ each of the Count operations that is performed.
+
+ If Width is EfiCpuIoWidthFifoUint8, EfiCpuIoWidthFifoUint16,
+ EfiCpuIoWidthFifoUint32, or EfiCpuIoWidthFifoUint64, then only Buffer is
+ incremented for each of the Count operations that is performed. The read or
+ write operation is performed Count times on the same Address.
+
+ If Width is EfiCpuIoWidthFillUint8, EfiCpuIoWidthFillUint16,
+ EfiCpuIoWidthFillUint32, or EfiCpuIoWidthFillUint64, then only Address is
+ incremented for each of the Count operations that is performed. The read or
+ write operation is performed Count times from the first element of Buffer.
+
+ @param[in] This A pointer to the EFI_CPU_IO2_PROTOCOL instance.
+ @param[in] Width Signifies the width of the I/O or Memory operation.
+ @param[in] Address The base address of the I/O operation.
+ @param[in] Count The number of I/O operations to perform. The number of
+ bytes moved is Width size * Count, starting at Address.
+ @param[in] Buffer For read operations, the destination buffer to store the results.
+ For write operations, the source buffer from which to write data.
+
+ @retval EFI_SUCCESS The data was read from or written to the PI system.
+ @retval EFI_INVALID_PARAMETER Width is invalid for this PI system.
+ @retval EFI_INVALID_PARAMETER Buffer is NULL.
+ @retval EFI_UNSUPPORTED The Buffer is not aligned for the given Width.
+ @retval EFI_UNSUPPORTED The address range specified by Address, Width,
+ and Count is not valid for this PI system.
+
+**/
+STATIC
+EFI_STATUS
+EFIAPI
+CpuIoServiceWrite (
+ IN EFI_CPU_IO2_PROTOCOL *This,
+ IN EFI_CPU_IO_PROTOCOL_WIDTH Width,
+ IN UINT64 Address,
+ IN UINTN Count,
+ IN VOID *Buffer
+ )
+{
+ EFI_STATUS Status;
+ UINT8 InStride;
+ UINT8 OutStride;
+ EFI_CPU_IO_PROTOCOL_WIDTH OperationWidth;
+ UINT8 *Uint8Buffer;
+
+ //
+ // Make sure the parameters are valid
+ //
+ Status = CpuIoCheckParameter (FALSE, Width, Address, Count, Buffer);
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+
+ //
+ // Select loop based on the width of the transfer
+ //
+ InStride = mInStride[Width];
+ OutStride = mOutStride[Width];
+ OperationWidth = (EFI_CPU_IO_PROTOCOL_WIDTH) (Width & 0x03);
+
+ // Assuming address has already been translated into MMIO address by PCI host
+ // bridge driver, so we call MmioRead/Write directly.
+ for (Uint8Buffer = (UINT8 *)Buffer; Count > 0; Address += InStride, Uint8Buffer += OutStride, Count--) {
+ if (OperationWidth == EfiCpuIoWidthUint8) {
+ MmioWrite8 ((UINTN)Address, *Uint8Buffer);
+ } else if (OperationWidth == EfiCpuIoWidthUint16) {
+ MmioWrite16 ((UINTN)Address, *((UINT16 *)Uint8Buffer));
+ } else if (OperationWidth == EfiCpuIoWidthUint32) {
+ MmioWrite32 ((UINTN)Address, *((UINT32 *)Uint8Buffer));
+ }
+ }
+
+ return EFI_SUCCESS;
+}
+
+//
+// CPU I/O 2 Protocol instance
+//
+STATIC EFI_CPU_IO2_PROTOCOL mCpuIo2 = {
+ {
+ CpuMemoryServiceRead,
+ CpuMemoryServiceWrite
+ },
+ {
+ CpuIoServiceRead,
+ CpuIoServiceWrite
+ }
+};
+
+
+/**
+ The user Entry Point for module CpuIo2Dxe. The user code starts with this function.
+
+ @param[in] ImageHandle The firmware allocated handle for the EFI image.
+ @param[in] SystemTable A pointer to the EFI System Table.
+
+ @retval EFI_SUCCESS The entry point is executed successfully.
+ @retval other Some error occurs when executing this entry point.
+
+**/
+EFI_STATUS
+EFIAPI
+ArmPciCpuIo2Initialize (
+ IN EFI_HANDLE ImageHandle,
+ IN EFI_SYSTEM_TABLE *SystemTable
+ )
+{
+ EFI_STATUS Status;
+
+ ASSERT_PROTOCOL_ALREADY_INSTALLED (NULL, &gEfiCpuIo2ProtocolGuid);
+ Status = gBS->InstallMultipleProtocolInterfaces (
+ &ImageHandle,
+ &gEfiCpuIo2ProtocolGuid, &mCpuIo2,
+ NULL
+ );
+ ASSERT_EFI_ERROR (Status);
+
+ return Status;
+}
diff --git a/Silicon/Hisilicon/Drivers/ArmPciCpuIo2Dxe/ArmPciCpuIo2Dxe.inf b/Silicon/Hisilicon/Drivers/ArmPciCpuIo2Dxe/ArmPciCpuIo2Dxe.inf
new file mode 100644
index 0000000000..fbb28319ca
--- /dev/null
+++ b/Silicon/Hisilicon/Drivers/ArmPciCpuIo2Dxe/ArmPciCpuIo2Dxe.inf
@@ -0,0 +1,48 @@
+## @file
+# Produces the CPU I/O 2 Protocol by using the services of the I/O Library.
+#
+# Copyright (c) 2009 - 2014, Intel Corporation. All rights reserved.<BR>
+# Copyright (c) 2016 - 2018, Linaro Ltd. All rights reserved.<BR>
+# Copyright (c) 2018, Hisilicon Ltd. All rights reserved.<BR>
+#
+# This program and the accompanying materials
+# are licensed and made available under the terms and conditions of the BSD License
+# which accompanies this distribution. The full text of the license may be found at
+# http://opensource.org/licenses/bsd-license.php
+#
+# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+#
+##
+
+[Defines]
+ INF_VERSION = 0x0001001A
+ BASE_NAME = ArmPciCpuIo2Dxe
+ FILE_GUID = 94577c7e-0bce-11e8-b4e8-286ed489ee9b
+ MODULE_TYPE = DXE_DRIVER
+ VERSION_STRING = 1.0
+ ENTRY_POINT = ArmPciCpuIo2Initialize
+
+#
+# The following information is for reference only and not required by the build tools.
+#
+# VALID_ARCHITECTURES = ARM AARCH64
+#
+
+[Sources]
+ ArmPciCpuIo2Dxe.c
+
+[Packages]
+ MdePkg/MdePkg.dec
+
+[LibraryClasses]
+ UefiDriverEntryPoint
+ BaseLib
+ DebugLib
+ IoLib
+
+[Protocols]
+ gEfiCpuIo2ProtocolGuid ## PRODUCES
+
+[Depex]
+ TRUE
--
2.17.0
^ permalink raw reply related [flat|nested] 16+ messages in thread
* [PATCH edk2-platforms v1 10/13] Hisilicon: add PciSegmentLib for Hi161x
2018-07-20 8:02 [PATCH edk2-platforms v1 00/13] Switching to generic PciHostBridge driver Ming Huang
` (8 preceding siblings ...)
2018-07-20 8:02 ` [PATCH edk2-platforms v1 09/13] Hisilicon: add PciCpuIo2Dxe Ming Huang
@ 2018-07-20 8:02 ` Ming Huang
2018-07-20 8:02 ` [PATCH edk2-platforms v1 11/13] Hisilicon/D0x: Switch to generic PciHostBridge driver Ming Huang
` (2 subsequent siblings)
12 siblings, 0 replies; 16+ messages in thread
From: Ming Huang @ 2018-07-20 8:02 UTC (permalink / raw)
To: leif.lindholm, linaro-uefi, edk2-devel, graeme.gregory
Cc: ard.biesheuvel, guoheyi, wanghuiqiang, huangming23, zhangjinsong2,
huangdaode, john.garry, Heyi Guo, Michael D Kinney
From: Heyi Guo <heyi.guo@linaro.org>
This is to prepare for switching to generic PciHostBridge, and
PciSegmentLib is needed by generic PciHostBridge driver.
This module copied from
edk2-platforms/Silicon/Socionext/SynQuacer/Library/SynQuacerPciSegmentLib.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Heyi Guo <heyi.guo@linaro.org>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
---
Silicon/Hisilicon/Hi1610/Library/Hi161xPciSegmentLib/Hi161xPciSegmentLib.inf | 36 +
Silicon/Hisilicon/Hi1610/Library/Hi161xPciSegmentLib/PciSegmentLib.c | 1503 ++++++++++++++++++++
2 files changed, 1539 insertions(+)
diff --git a/Silicon/Hisilicon/Hi1610/Library/Hi161xPciSegmentLib/Hi161xPciSegmentLib.inf b/Silicon/Hisilicon/Hi1610/Library/Hi161xPciSegmentLib/Hi161xPciSegmentLib.inf
new file mode 100644
index 0000000000..cd2ae88102
--- /dev/null
+++ b/Silicon/Hisilicon/Hi1610/Library/Hi161xPciSegmentLib/Hi161xPciSegmentLib.inf
@@ -0,0 +1,36 @@
+## @file
+# PCI Segment Library for Hisilicon Hi1610/Hi1616 SoC with multiple RCs
+#
+# Copyright (c) 2007 - 2014, Intel Corporation. All rights reserved.<BR>
+# Copyright (c) 2017 - 2018, Linaro Ltd. All rights reserved.<BR>
+# Copyright (c) 2018, Hisilicon Ltd. All rights reserved.<BR>
+#
+# This program and the accompanying materials
+# are licensed and made available under the terms and conditions of the BSD License
+# which accompanies this distribution. The full text of the license may be found at
+# http://opensource.org/licenses/bsd-license.php.
+# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+#
+#
+##
+
+[Defines]
+ INF_VERSION = 0x0001001A
+ BASE_NAME = Hi161xPciSegmentLib
+ FILE_GUID = 22447df4-0baa-11e8-b6de-286ed489ee9b
+ MODULE_TYPE = BASE
+ VERSION_STRING = 1.0
+ LIBRARY_CLASS = PciSegmentLib
+
+[Sources]
+ PciSegmentLib.c
+
+[Packages]
+ MdePkg/MdePkg.dec
+ Silicon/Hisilicon/HisiPkg.dec
+
+[LibraryClasses]
+ BaseLib
+ DebugLib
+ IoLib
diff --git a/Silicon/Hisilicon/Hi1610/Library/Hi161xPciSegmentLib/PciSegmentLib.c b/Silicon/Hisilicon/Hi1610/Library/Hi161xPciSegmentLib/PciSegmentLib.c
new file mode 100644
index 0000000000..2e66244a47
--- /dev/null
+++ b/Silicon/Hisilicon/Hi1610/Library/Hi161xPciSegmentLib/PciSegmentLib.c
@@ -0,0 +1,1503 @@
+/** @file
+ PCI Segment Library for SynQuacer SoC with multiple RCs
+
+ Copyright (c) 2007 - 2012, Intel Corporation. All rights reserved.<BR>
+ Copyright (c) 2017, Linaro, Ltd. All rights reserved.<BR>
+
+ This program and the accompanying materials are
+ licensed and made available under the terms and conditions of
+ the BSD License which accompanies this distribution. The full
+ text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php.
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+#include <Base.h>
+
+#include <Library/PciSegmentLib.h>
+#include <Library/BaseLib.h>
+#include <Library/DebugLib.h>
+#include <Library/IoLib.h>
+#include <Library/PlatformPciLib.h>
+
+typedef enum {
+ PciCfgWidthUint8 = 0,
+ PciCfgWidthUint16,
+ PciCfgWidthUint32,
+ PciCfgWidthMax
+} PCI_CFG_WIDTH;
+
+/**
+ Assert the validity of a PCI Segment address.
+ A valid PCI Segment address should not contain 1's in bits 28..31 and 48..63
+
+ @param A The address to validate.
+ @param M Additional bits to assert to be zero.
+
+**/
+#define ASSERT_INVALID_PCI_SEGMENT_ADDRESS(A,M) \
+ ASSERT (((A) & (0xffff0000f0000000ULL | (M))) == 0)
+
+#define EXTRACT_PCIE_ADDRESS(Address, Segment, Bus, Device, Function, Register) \
+{ \
+ (Segment) = (RShiftU64 (Address, 32) & 0xffff); \
+ (Bus) = (((Address) >> 20) & 0xff); \
+ (Device) = (((Address) >> 15) & 0x1f); \
+ (Function) = (((Address) >> 12) & 0x07); \
+ (Register) = ((Address) & 0xfff); \
+}
+
+STATIC
+PCI_ROOT_BRIDGE_RESOURCE_APPETURE *
+PciSegmentLibGetAppeture (
+ IN UINT32 Segment
+ )
+{
+ UINTN Hb;
+ UINTN Rb;
+
+ for (Hb = 0; Hb < PCIE_MAX_HOSTBRIDGE; Hb++) {
+ for (Rb = 0; Rb < PCIE_MAX_ROOTBRIDGE; Rb++) {
+ if (Segment == mResAppeture[Hb][Rb].Segment) {
+ return &mResAppeture[Hb][Rb];
+ }
+ }
+ }
+
+ // Shouldn't reach here
+ ASSERT (FALSE);
+ return NULL;
+}
+
+BOOLEAN PcieIsLinkUp (UINTN RbPciBar)
+{
+ UINT32 Value;
+
+ Value = MmioRead32(RbPciBar + 0x131C);
+ if ((Value & 0x3F) == 0x11) {
+ return TRUE;
+ }
+ return FALSE;
+}
+
+
+STATIC
+UINT32
+CpuMemoryServiceRead (
+ IN UINT64 Address,
+ IN PCI_CFG_WIDTH Width
+ )
+{
+
+ UINT32 Uint32Buffer;
+
+ //
+ // Select loop based on the width of the transfer
+ //
+ if (Width == PciCfgWidthUint8) {
+ Uint32Buffer = MmioRead32((UINTN)(Address & (~0x3)));
+ return BitFieldRead32 (Uint32Buffer, (Address & 0x3) * 8, (Address & 0x3) * 8 + 7);
+ } else if (Width == PciCfgWidthUint16) {
+ if (((Address & 0x3) == 1) || ((Address & 0x3) == 3)) {
+ return 0xffff;
+ }
+ Uint32Buffer = MmioRead32((UINTN)(Address & (~0x3)));
+ return BitFieldRead32 (Uint32Buffer, (Address & 0x3) * 8, (Address & 0x3) * 8 + 15);
+ } else if (Width == PciCfgWidthUint32) {
+ return MmioRead32 ((UINTN)Address);
+ } else {
+ return 0xffffffff;
+ }
+}
+
+STATIC
+UINT32
+CpuMemoryServiceWrite (
+ IN UINT64 Address,
+ IN PCI_CFG_WIDTH Width,
+ IN UINT32 Data
+ )
+{
+
+ UINT32 Uint32Buffer;
+
+ //
+ // Select loop based on the width of the transfer
+ //
+ if (Width == PciCfgWidthUint8) {
+ Uint32Buffer = MmioRead32((UINTN)(Address & (~0x3)));
+ Uint32Buffer = BitFieldWrite32 (Uint32Buffer, (Address & 0x3) * 8, (Address & 0x3) * 8 + 7, Data);
+ MmioWrite32 ((UINTN)(Address & (~0x3)), Uint32Buffer);
+ } else if (Width == PciCfgWidthUint16) {
+ if (((Address & 0x3) == 1) || ((Address & 0x3) == 3)) {
+ return 0xffffffff;
+ }
+ Uint32Buffer = MmioRead32((UINTN)(Address & (~0x3)));
+ Uint32Buffer = BitFieldWrite32 (Uint32Buffer, (Address & 0x3) * 8, (Address & 0x3) * 8 + 15, Data);
+ MmioWrite32 ((UINTN)(Address & (~0x3)), Uint32Buffer);
+ } else if (Width == PciCfgWidthUint32) {
+ MmioWrite32 ((UINTN)Address, Data);
+ } else {
+ return 0xffffffff;
+ }
+ return Data;
+}
+/**
+ Internal worker function to read a PCI configuration register.
+
+ @param Address The address that encodes the PCI Bus, Device, Function and
+ Register.
+ @param Width The width of data to read
+
+ @return The value read from the PCI configuration register.
+
+**/
+STATIC
+UINT32
+PciSegmentLibReadWorker (
+ IN UINT64 Address,
+ IN PCI_CFG_WIDTH Width
+ )
+{
+ PCI_ROOT_BRIDGE_RESOURCE_APPETURE *Appeture;
+ UINT32 Segment;
+ UINT8 Bus;
+ UINT8 Device;
+ UINT8 Function;
+ UINT32 Register;
+
+ UINT64 MmioAddress;
+
+ EXTRACT_PCIE_ADDRESS (Address, Segment, Bus, Device, Function, Register);
+ Appeture = PciSegmentLibGetAppeture (Segment);
+ if (Appeture == NULL) {
+ return 0xffffffff;
+ }
+
+ if (Bus == Appeture->BusBase) {
+ // ignore device > 0 or function > 0 on base bus
+ if (Device != 0 || Function != 0) {
+ return 0xffffffff;
+ }
+ MmioAddress = Appeture->RbPciBar + Register;
+ } else {
+ // Cannot read from device under root port when link is not up
+ if (Bus == Appeture->BusBase + 1 && !PcieIsLinkUp (Appeture->RbPciBar)) {
+ return 0xffffffff;
+ }
+
+ MmioAddress = Appeture->Ecam + (UINT32)Address;
+ }
+
+ return CpuMemoryServiceRead (MmioAddress, Width);
+}
+
+/**
+ Internal worker function to writes a PCI configuration register.
+
+ @param Address The address that encodes the PCI Bus, Device, Function and
+ Register.
+ @param Width The width of data to write
+ @param Data The value to write.
+
+ @return The value written to the PCI configuration register.
+
+**/
+STATIC
+UINT32
+PciSegmentLibWriteWorker (
+ IN UINT64 Address,
+ IN PCI_CFG_WIDTH Width,
+ IN UINT32 Data
+ )
+{
+ PCI_ROOT_BRIDGE_RESOURCE_APPETURE *Appeture;
+ UINT32 Segment;
+ UINT8 Bus;
+ UINT8 Device;
+ UINT8 Function;
+ UINT32 Register;
+
+ UINT64 MmioAddress;
+
+ EXTRACT_PCIE_ADDRESS (Address, Segment, Bus, Device, Function, Register);
+ Appeture = PciSegmentLibGetAppeture (Segment);
+ if (Appeture == NULL) {
+ return 0xffffffff;
+ }
+
+ if (Bus == Appeture->BusBase) {
+ // ignore device > 0 or function > 0 on base bus
+ if (Device != 0 || Function != 0) {
+ return Data;
+ }
+ // Ignore writing to root port BAR registers, in case we get wrong BAR length
+ if ((Register & ~0x3) == 0x14 || (Register & ~0x3) == 0x10) {
+ return Data;
+ }
+ MmioAddress = Appeture->RbPciBar + Register;
+ } else {
+ // Cannot read from device under root port when link is not up
+ if (Bus == Appeture->BusBase + 1 && !PcieIsLinkUp (Appeture->RbPciBar)) {
+ return 0xffffffff;
+ }
+ MmioAddress = Appeture->Ecam + (UINT32)Address;
+ }
+
+ return CpuMemoryServiceWrite (MmioAddress, Width, Data);
+}
+
+/**
+ Register a PCI device so PCI configuration registers may be accessed after
+ SetVirtualAddressMap().
+
+ If any reserved bits in Address are set, then ASSERT().
+
+ @param Address The address that encodes the PCI Bus, Device, Function and
+ Register.
+
+ @retval RETURN_SUCCESS The PCI device was registered for runtime access.
+ @retval RETURN_UNSUPPORTED An attempt was made to call this function
+ after ExitBootServices().
+ @retval RETURN_UNSUPPORTED The resources required to access the PCI device
+ at runtime could not be mapped.
+ @retval RETURN_OUT_OF_RESOURCES There are not enough resources available to
+ complete the registration.
+
+**/
+RETURN_STATUS
+EFIAPI
+PciSegmentRegisterForRuntimeAccess (
+ IN UINTN Address
+ )
+{
+ ASSERT_INVALID_PCI_SEGMENT_ADDRESS (Address, 0);
+ return RETURN_UNSUPPORTED;
+}
+
+/**
+ Reads an 8-bit PCI configuration register.
+
+ Reads and returns the 8-bit PCI configuration register specified by Address.
+ This function must guarantee that all PCI read and write operations are serialized.
+
+ If any reserved bits in Address are set, then ASSERT().
+
+ @param Address The address that encodes the PCI Segment, Bus, Device, Function,
+ and Register.
+
+ @return The 8-bit PCI configuration register specified by Address.
+
+**/
+UINT8
+EFIAPI
+PciSegmentRead8 (
+ IN UINT64 Address
+ )
+{
+ ASSERT_INVALID_PCI_SEGMENT_ADDRESS (Address, 0);
+
+ return (UINT8) PciSegmentLibReadWorker (Address, PciCfgWidthUint8);
+}
+
+/**
+ Writes an 8-bit PCI configuration register.
+
+ Writes the 8-bit PCI configuration register specified by Address with the value specified by Value.
+ Value is returned. This function must guarantee that all PCI read and write operations are serialized.
+
+ If any reserved bits in Address are set, then ASSERT().
+
+ @param Address The address that encodes the PCI Segment, Bus, Device, Function, and Register.
+ @param Value The value to write.
+
+ @return The value written to the PCI configuration register.
+
+**/
+UINT8
+EFIAPI
+PciSegmentWrite8 (
+ IN UINT64 Address,
+ IN UINT8 Value
+ )
+{
+ ASSERT_INVALID_PCI_SEGMENT_ADDRESS (Address, 0);
+
+ return (UINT8) PciSegmentLibWriteWorker (Address, PciCfgWidthUint8, Value);
+}
+
+/**
+ Performs a bitwise OR of an 8-bit PCI configuration register with an 8-bit value.
+
+ Reads the 8-bit PCI configuration register specified by Address,
+ performs a bitwise OR between the read result and the value specified by OrData,
+ and writes the result to the 8-bit PCI configuration register specified by Address.
+ The value written to the PCI configuration register is returned.
+ This function must guarantee that all PCI read and write operations are serialized.
+
+ If any reserved bits in Address are set, then ASSERT().
+
+ @param Address The address that encodes the PCI Segment, Bus, Device, Function, and Register.
+ @param OrData The value to OR with the PCI configuration register.
+
+ @return The value written to the PCI configuration register.
+
+**/
+UINT8
+EFIAPI
+PciSegmentOr8 (
+ IN UINT64 Address,
+ IN UINT8 OrData
+ )
+{
+ return PciSegmentWrite8 (Address, (UINT8) (PciSegmentRead8 (Address) | OrData));
+}
+
+/**
+ Performs a bitwise AND of an 8-bit PCI configuration register with an 8-bit value.
+
+ Reads the 8-bit PCI configuration register specified by Address,
+ performs a bitwise AND between the read result and the value specified by AndData,
+ and writes the result to the 8-bit PCI configuration register specified by Address.
+ The value written to the PCI configuration register is returned.
+ This function must guarantee that all PCI read and write operations are serialized.
+ If any reserved bits in Address are set, then ASSERT().
+
+ @param Address The address that encodes the PCI Segment, Bus, Device, Function, and Register.
+ @param AndData The value to AND with the PCI configuration register.
+
+ @return The value written to the PCI configuration register.
+
+**/
+UINT8
+EFIAPI
+PciSegmentAnd8 (
+ IN UINT64 Address,
+ IN UINT8 AndData
+ )
+{
+ return PciSegmentWrite8 (Address, (UINT8) (PciSegmentRead8 (Address) & AndData));
+}
+
+/**
+ Performs a bitwise AND of an 8-bit PCI configuration register with an 8-bit value,
+ followed a bitwise OR with another 8-bit value.
+
+ Reads the 8-bit PCI configuration register specified by Address,
+ performs a bitwise AND between the read result and the value specified by AndData,
+ performs a bitwise OR between the result of the AND operation and the value specified by OrData,
+ and writes the result to the 8-bit PCI configuration register specified by Address.
+ The value written to the PCI configuration register is returned.
+ This function must guarantee that all PCI read and write operations are serialized.
+
+ If any reserved bits in Address are set, then ASSERT().
+
+ @param Address The address that encodes the PCI Segment, Bus, Device, Function, and Register.
+ @param AndData The value to AND with the PCI configuration register.
+ @param OrData The value to OR with the PCI configuration register.
+
+ @return The value written to the PCI configuration register.
+
+**/
+UINT8
+EFIAPI
+PciSegmentAndThenOr8 (
+ IN UINT64 Address,
+ IN UINT8 AndData,
+ IN UINT8 OrData
+ )
+{
+ return PciSegmentWrite8 (Address, (UINT8) ((PciSegmentRead8 (Address) & AndData) | OrData));
+}
+
+/**
+ Reads a bit field of a PCI configuration register.
+
+ Reads the bit field in an 8-bit PCI configuration register. The bit field is
+ specified by the StartBit and the EndBit. The value of the bit field is
+ returned.
+
+ If any reserved bits in Address are set, then ASSERT().
+ If StartBit is greater than 7, then ASSERT().
+ If EndBit is greater than 7, then ASSERT().
+ If EndBit is less than StartBit, then ASSERT().
+
+ @param Address The PCI configuration register to read.
+ @param StartBit The ordinal of the least significant bit in the bit field.
+ Range 0..7.
+ @param EndBit The ordinal of the most significant bit in the bit field.
+ Range 0..7.
+
+ @return The value of the bit field read from the PCI configuration register.
+
+**/
+UINT8
+EFIAPI
+PciSegmentBitFieldRead8 (
+ IN UINT64 Address,
+ IN UINTN StartBit,
+ IN UINTN EndBit
+ )
+{
+ return BitFieldRead8 (PciSegmentRead8 (Address), StartBit, EndBit);
+}
+
+/**
+ Writes a bit field to a PCI configuration register.
+
+ Writes Value to the bit field of the PCI configuration register. The bit
+ field is specified by the StartBit and the EndBit. All other bits in the
+ destination PCI configuration register are preserved. The new value of the
+ 8-bit register is returned.
+
+ If any reserved bits in Address are set, then ASSERT().
+ If StartBit is greater than 7, then ASSERT().
+ If EndBit is greater than 7, then ASSERT().
+ If EndBit is less than StartBit, then ASSERT().
+ If Value is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT().
+
+ @param Address The PCI configuration register to write.
+ @param StartBit The ordinal of the least significant bit in the bit field.
+ Range 0..7.
+ @param EndBit The ordinal of the most significant bit in the bit field.
+ Range 0..7.
+ @param Value The new value of the bit field.
+
+ @return The value written back to the PCI configuration register.
+
+**/
+UINT8
+EFIAPI
+PciSegmentBitFieldWrite8 (
+ IN UINT64 Address,
+ IN UINTN StartBit,
+ IN UINTN EndBit,
+ IN UINT8 Value
+ )
+{
+ return PciSegmentWrite8 (
+ Address,
+ BitFieldWrite8 (PciSegmentRead8 (Address), StartBit, EndBit, Value)
+ );
+}
+
+/**
+ Reads a bit field in an 8-bit PCI configuration, performs a bitwise OR, and
+ writes the result back to the bit field in the 8-bit port.
+
+ Reads the 8-bit PCI configuration register specified by Address, performs a
+ bitwise OR between the read result and the value specified by
+ OrData, and writes the result to the 8-bit PCI configuration register
+ specified by Address. The value written to the PCI configuration register is
+ returned. This function must guarantee that all PCI read and write operations
+ are serialized. Extra left bits in OrData are stripped.
+
+ If any reserved bits in Address are set, then ASSERT().
+ If StartBit is greater than 7, then ASSERT().
+ If EndBit is greater than 7, then ASSERT().
+ If EndBit is less than StartBit, then ASSERT().
+ If OrData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT().
+
+ @param Address The PCI configuration register to write.
+ @param StartBit The ordinal of the least significant bit in the bit field.
+ Range 0..7.
+ @param EndBit The ordinal of the most significant bit in the bit field.
+ Range 0..7.
+ @param OrData The value to OR with the PCI configuration register.
+
+ @return The value written back to the PCI configuration register.
+
+**/
+UINT8
+EFIAPI
+PciSegmentBitFieldOr8 (
+ IN UINT64 Address,
+ IN UINTN StartBit,
+ IN UINTN EndBit,
+ IN UINT8 OrData
+ )
+{
+ return PciSegmentWrite8 (
+ Address,
+ BitFieldOr8 (PciSegmentRead8 (Address), StartBit, EndBit, OrData)
+ );
+}
+
+/**
+ Reads a bit field in an 8-bit PCI configuration register, performs a bitwise
+ AND, and writes the result back to the bit field in the 8-bit register.
+
+ Reads the 8-bit PCI configuration register specified by Address, performs a
+ bitwise AND between the read result and the value specified by AndData, and
+ writes the result to the 8-bit PCI configuration register specified by
+ Address. The value written to the PCI configuration register is returned.
+ This function must guarantee that all PCI read and write operations are
+ serialized. Extra left bits in AndData are stripped.
+
+ If any reserved bits in Address are set, then ASSERT().
+ If StartBit is greater than 7, then ASSERT().
+ If EndBit is greater than 7, then ASSERT().
+ If EndBit is less than StartBit, then ASSERT().
+ If AndData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT().
+
+ @param Address The PCI configuration register to write.
+ @param StartBit The ordinal of the least significant bit in the bit field.
+ Range 0..7.
+ @param EndBit The ordinal of the most significant bit in the bit field.
+ Range 0..7.
+ @param AndData The value to AND with the PCI configuration register.
+
+ @return The value written back to the PCI configuration register.
+
+**/
+UINT8
+EFIAPI
+PciSegmentBitFieldAnd8 (
+ IN UINT64 Address,
+ IN UINTN StartBit,
+ IN UINTN EndBit,
+ IN UINT8 AndData
+ )
+{
+ return PciSegmentWrite8 (
+ Address,
+ BitFieldAnd8 (PciSegmentRead8 (Address), StartBit, EndBit, AndData)
+ );
+}
+
+/**
+ Reads a bit field in an 8-bit port, performs a bitwise AND followed by a
+ bitwise OR, and writes the result back to the bit field in the
+ 8-bit port.
+
+ Reads the 8-bit PCI configuration register specified by Address, performs a
+ bitwise AND followed by a bitwise OR between the read result and
+ the value specified by AndData, and writes the result to the 8-bit PCI
+ configuration register specified by Address. The value written to the PCI
+ configuration register is returned. This function must guarantee that all PCI
+ read and write operations are serialized. Extra left bits in both AndData and
+ OrData are stripped.
+
+ If any reserved bits in Address are set, then ASSERT().
+ If StartBit is greater than 7, then ASSERT().
+ If EndBit is greater than 7, then ASSERT().
+ If EndBit is less than StartBit, then ASSERT().
+ If AndData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT().
+ If OrData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT().
+
+ @param Address The PCI configuration register to write.
+ @param StartBit The ordinal of the least significant bit in the bit field.
+ Range 0..7.
+ @param EndBit The ordinal of the most significant bit in the bit field.
+ Range 0..7.
+ @param AndData The value to AND with the PCI configuration register.
+ @param OrData The value to OR with the result of the AND operation.
+
+ @return The value written back to the PCI configuration register.
+
+**/
+UINT8
+EFIAPI
+PciSegmentBitFieldAndThenOr8 (
+ IN UINT64 Address,
+ IN UINTN StartBit,
+ IN UINTN EndBit,
+ IN UINT8 AndData,
+ IN UINT8 OrData
+ )
+{
+ return PciSegmentWrite8 (
+ Address,
+ BitFieldAndThenOr8 (PciSegmentRead8 (Address), StartBit, EndBit, AndData, OrData)
+ );
+}
+
+/**
+ Reads a 16-bit PCI configuration register.
+
+ Reads and returns the 16-bit PCI configuration register specified by Address.
+ This function must guarantee that all PCI read and write operations are serialized.
+
+ If any reserved bits in Address are set, then ASSERT().
+ If Address is not aligned on a 16-bit boundary, then ASSERT().
+
+ @param Address The address that encodes the PCI Segment, Bus, Device, Function, and Register.
+
+ @return The 16-bit PCI configuration register specified by Address.
+
+**/
+UINT16
+EFIAPI
+PciSegmentRead16 (
+ IN UINT64 Address
+ )
+{
+ ASSERT_INVALID_PCI_SEGMENT_ADDRESS (Address, 1);
+
+ return (UINT16) PciSegmentLibReadWorker (Address, PciCfgWidthUint16);
+}
+
+/**
+ Writes a 16-bit PCI configuration register.
+
+ Writes the 16-bit PCI configuration register specified by Address with the value specified by Value.
+ Value is returned. This function must guarantee that all PCI read and write operations are serialized.
+
+ If any reserved bits in Address are set, then ASSERT().
+ If Address is not aligned on a 16-bit boundary, then ASSERT().
+
+ @param Address The address that encodes the PCI Segment, Bus, Device, Function, and Register.
+ @param Value The value to write.
+
+ @return The parameter of Value.
+
+**/
+UINT16
+EFIAPI
+PciSegmentWrite16 (
+ IN UINT64 Address,
+ IN UINT16 Value
+ )
+{
+ ASSERT_INVALID_PCI_SEGMENT_ADDRESS (Address, 1);
+
+ return (UINT16) PciSegmentLibWriteWorker (Address, PciCfgWidthUint16, Value);
+}
+
+/**
+ Performs a bitwise OR of a 16-bit PCI configuration register with
+ a 16-bit value.
+
+ Reads the 16-bit PCI configuration register specified by Address, performs a
+ bitwise OR between the read result and the value specified by
+ OrData, and writes the result to the 16-bit PCI configuration register
+ specified by Address. The value written to the PCI configuration register is
+ returned. This function must guarantee that all PCI read and write operations
+ are serialized.
+
+ If any reserved bits in Address are set, then ASSERT().
+ If Address is not aligned on a 16-bit boundary, then ASSERT().
+
+ @param Address The address that encodes the PCI Segment, Bus, Device, Function and
+ Register.
+ @param OrData The value to OR with the PCI configuration register.
+
+ @return The value written back to the PCI configuration register.
+
+**/
+UINT16
+EFIAPI
+PciSegmentOr16 (
+ IN UINT64 Address,
+ IN UINT16 OrData
+ )
+{
+ return PciSegmentWrite16 (Address, (UINT16) (PciSegmentRead16 (Address) | OrData));
+}
+
+/**
+ Performs a bitwise AND of a 16-bit PCI configuration register with a 16-bit value.
+
+ Reads the 16-bit PCI configuration register specified by Address,
+ performs a bitwise AND between the read result and the value specified by AndData,
+ and writes the result to the 16-bit PCI configuration register specified by Address.
+ The value written to the PCI configuration register is returned.
+ This function must guarantee that all PCI read and write operations are serialized.
+
+ If any reserved bits in Address are set, then ASSERT().
+ If Address is not aligned on a 16-bit boundary, then ASSERT().
+
+ @param Address The address that encodes the PCI Segment, Bus, Device, Function, and Register.
+ @param AndData The value to AND with the PCI configuration register.
+
+ @return The value written to the PCI configuration register.
+
+**/
+UINT16
+EFIAPI
+PciSegmentAnd16 (
+ IN UINT64 Address,
+ IN UINT16 AndData
+ )
+{
+ return PciSegmentWrite16 (Address, (UINT16) (PciSegmentRead16 (Address) & AndData));
+}
+
+/**
+ Performs a bitwise AND of a 16-bit PCI configuration register with a 16-bit value,
+ followed a bitwise OR with another 16-bit value.
+
+ Reads the 16-bit PCI configuration register specified by Address,
+ performs a bitwise AND between the read result and the value specified by AndData,
+ performs a bitwise OR between the result of the AND operation and the value specified by OrData,
+ and writes the result to the 16-bit PCI configuration register specified by Address.
+ The value written to the PCI configuration register is returned.
+ This function must guarantee that all PCI read and write operations are serialized.
+
+ If any reserved bits in Address are set, then ASSERT().
+ If Address is not aligned on a 16-bit boundary, then ASSERT().
+
+ @param Address The address that encodes the PCI Segment, Bus, Device, Function, and Register.
+ @param AndData The value to AND with the PCI configuration register.
+ @param OrData The value to OR with the PCI configuration register.
+
+ @return The value written to the PCI configuration register.
+
+**/
+UINT16
+EFIAPI
+PciSegmentAndThenOr16 (
+ IN UINT64 Address,
+ IN UINT16 AndData,
+ IN UINT16 OrData
+ )
+{
+ return PciSegmentWrite16 (Address, (UINT16) ((PciSegmentRead16 (Address) & AndData) | OrData));
+}
+
+/**
+ Reads a bit field of a PCI configuration register.
+
+ Reads the bit field in a 16-bit PCI configuration register. The bit field is
+ specified by the StartBit and the EndBit. The value of the bit field is
+ returned.
+
+ If any reserved bits in Address are set, then ASSERT().
+ If Address is not aligned on a 16-bit boundary, then ASSERT().
+ If StartBit is greater than 15, then ASSERT().
+ If EndBit is greater than 15, then ASSERT().
+ If EndBit is less than StartBit, then ASSERT().
+
+ @param Address The PCI configuration register to read.
+ @param StartBit The ordinal of the least significant bit in the bit field.
+ Range 0..15.
+ @param EndBit The ordinal of the most significant bit in the bit field.
+ Range 0..15.
+
+ @return The value of the bit field read from the PCI configuration register.
+
+**/
+UINT16
+EFIAPI
+PciSegmentBitFieldRead16 (
+ IN UINT64 Address,
+ IN UINTN StartBit,
+ IN UINTN EndBit
+ )
+{
+ return BitFieldRead16 (PciSegmentRead16 (Address), StartBit, EndBit);
+}
+
+/**
+ Writes a bit field to a PCI configuration register.
+
+ Writes Value to the bit field of the PCI configuration register. The bit
+ field is specified by the StartBit and the EndBit. All other bits in the
+ destination PCI configuration register are preserved. The new value of the
+ 16-bit register is returned.
+
+ If any reserved bits in Address are set, then ASSERT().
+ If Address is not aligned on a 16-bit boundary, then ASSERT().
+ If StartBit is greater than 15, then ASSERT().
+ If EndBit is greater than 15, then ASSERT().
+ If EndBit is less than StartBit, then ASSERT().
+ If Value is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT().
+
+ @param Address The PCI configuration register to write.
+ @param StartBit The ordinal of the least significant bit in the bit field.
+ Range 0..15.
+ @param EndBit The ordinal of the most significant bit in the bit field.
+ Range 0..15.
+ @param Value The new value of the bit field.
+
+ @return The value written back to the PCI configuration register.
+
+**/
+UINT16
+EFIAPI
+PciSegmentBitFieldWrite16 (
+ IN UINT64 Address,
+ IN UINTN StartBit,
+ IN UINTN EndBit,
+ IN UINT16 Value
+ )
+{
+ return PciSegmentWrite16 (
+ Address,
+ BitFieldWrite16 (PciSegmentRead16 (Address), StartBit, EndBit, Value)
+ );
+}
+
+/**
+ Reads the 16-bit PCI configuration register specified by Address,
+ performs a bitwise OR between the read result and the value specified by OrData,
+ and writes the result to the 16-bit PCI configuration register specified by Address.
+
+ If any reserved bits in Address are set, then ASSERT().
+ If Address is not aligned on a 16-bit boundary, then ASSERT().
+ If StartBit is greater than 15, then ASSERT().
+ If EndBit is greater than 15, then ASSERT().
+ If EndBit is less than StartBit, then ASSERT().
+ If OrData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT().
+
+ @param Address The PCI configuration register to write.
+ @param StartBit The ordinal of the least significant bit in the bit field.
+ Range 0..15.
+ @param EndBit The ordinal of the most significant bit in the bit field.
+ Range 0..15.
+ @param OrData The value to OR with the PCI configuration register.
+
+ @return The value written back to the PCI configuration register.
+
+**/
+UINT16
+EFIAPI
+PciSegmentBitFieldOr16 (
+ IN UINT64 Address,
+ IN UINTN StartBit,
+ IN UINTN EndBit,
+ IN UINT16 OrData
+ )
+{
+ return PciSegmentWrite16 (
+ Address,
+ BitFieldOr16 (PciSegmentRead16 (Address), StartBit, EndBit, OrData)
+ );
+}
+
+/**
+ Reads a bit field in a 16-bit PCI configuration, performs a bitwise OR,
+ and writes the result back to the bit field in the 16-bit port.
+
+ Reads the 16-bit PCI configuration register specified by Address,
+ performs a bitwise OR between the read result and the value specified by OrData,
+ and writes the result to the 16-bit PCI configuration register specified by Address.
+ The value written to the PCI configuration register is returned.
+ This function must guarantee that all PCI read and write operations are serialized.
+ Extra left bits in OrData are stripped.
+
+ If any reserved bits in Address are set, then ASSERT().
+ If Address is not aligned on a 16-bit boundary, then ASSERT().
+ If StartBit is greater than 7, then ASSERT().
+ If EndBit is greater than 7, then ASSERT().
+ If EndBit is less than StartBit, then ASSERT().
+ If AndData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT().
+
+ @param Address The address that encodes the PCI Segment, Bus, Device, Function, and Register.
+ @param StartBit The ordinal of the least significant bit in the bit field.
+ The ordinal of the least significant bit in a byte is bit 0.
+ @param EndBit The ordinal of the most significant bit in the bit field.
+ The ordinal of the most significant bit in a byte is bit 7.
+ @param AndData The value to AND with the read value from the PCI configuration register.
+
+ @return The value written to the PCI configuration register.
+
+**/
+UINT16
+EFIAPI
+PciSegmentBitFieldAnd16 (
+ IN UINT64 Address,
+ IN UINTN StartBit,
+ IN UINTN EndBit,
+ IN UINT16 AndData
+ )
+{
+ return PciSegmentWrite16 (
+ Address,
+ BitFieldAnd16 (PciSegmentRead16 (Address), StartBit, EndBit, AndData)
+ );
+}
+
+/**
+ Reads a bit field in a 16-bit port, performs a bitwise AND followed by a
+ bitwise OR, and writes the result back to the bit field in the
+ 16-bit port.
+
+ Reads the 16-bit PCI configuration register specified by Address, performs a
+ bitwise AND followed by a bitwise OR between the read result and
+ the value specified by AndData, and writes the result to the 16-bit PCI
+ configuration register specified by Address. The value written to the PCI
+ configuration register is returned. This function must guarantee that all PCI
+ read and write operations are serialized. Extra left bits in both AndData and
+ OrData are stripped.
+
+ If any reserved bits in Address are set, then ASSERT().
+ If StartBit is greater than 15, then ASSERT().
+ If EndBit is greater than 15, then ASSERT().
+ If EndBit is less than StartBit, then ASSERT().
+ If AndData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT().
+ If OrData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT().
+
+ @param Address The PCI configuration register to write.
+ @param StartBit The ordinal of the least significant bit in the bit field.
+ Range 0..15.
+ @param EndBit The ordinal of the most significant bit in the bit field.
+ Range 0..15.
+ @param AndData The value to AND with the PCI configuration register.
+ @param OrData The value to OR with the result of the AND operation.
+
+ @return The value written back to the PCI configuration register.
+
+**/
+UINT16
+EFIAPI
+PciSegmentBitFieldAndThenOr16 (
+ IN UINT64 Address,
+ IN UINTN StartBit,
+ IN UINTN EndBit,
+ IN UINT16 AndData,
+ IN UINT16 OrData
+ )
+{
+ return PciSegmentWrite16 (
+ Address,
+ BitFieldAndThenOr16 (PciSegmentRead16 (Address), StartBit, EndBit, AndData, OrData)
+ );
+}
+
+/**
+ Reads a 32-bit PCI configuration register.
+
+ Reads and returns the 32-bit PCI configuration register specified by Address.
+ This function must guarantee that all PCI read and write operations are serialized.
+
+ If any reserved bits in Address are set, then ASSERT().
+ If Address is not aligned on a 32-bit boundary, then ASSERT().
+
+ @param Address The address that encodes the PCI Segment, Bus, Device, Function,
+ and Register.
+
+ @return The 32-bit PCI configuration register specified by Address.
+
+**/
+UINT32
+EFIAPI
+PciSegmentRead32 (
+ IN UINT64 Address
+ )
+{
+ ASSERT_INVALID_PCI_SEGMENT_ADDRESS (Address, 3);
+
+ return PciSegmentLibReadWorker (Address, PciCfgWidthUint32);
+}
+
+/**
+ Writes a 32-bit PCI configuration register.
+
+ Writes the 32-bit PCI configuration register specified by Address with the value specified by Value.
+ Value is returned. This function must guarantee that all PCI read and write operations are serialized.
+
+ If any reserved bits in Address are set, then ASSERT().
+ If Address is not aligned on a 32-bit boundary, then ASSERT().
+
+ @param Address The address that encodes the PCI Segment, Bus, Device,
+ Function, and Register.
+ @param Value The value to write.
+
+ @return The parameter of Value.
+
+**/
+UINT32
+EFIAPI
+PciSegmentWrite32 (
+ IN UINT64 Address,
+ IN UINT32 Value
+ )
+{
+ ASSERT_INVALID_PCI_SEGMENT_ADDRESS (Address, 3);
+
+ return PciSegmentLibWriteWorker (Address, PciCfgWidthUint32, Value);
+}
+
+/**
+ Performs a bitwise OR of a 32-bit PCI configuration register with a 32-bit value.
+
+ Reads the 32-bit PCI configuration register specified by Address,
+ performs a bitwise OR between the read result and the value specified by OrData,
+ and writes the result to the 32-bit PCI configuration register specified by Address.
+ The value written to the PCI configuration register is returned.
+ This function must guarantee that all PCI read and write operations are serialized.
+
+ If any reserved bits in Address are set, then ASSERT().
+ If Address is not aligned on a 32-bit boundary, then ASSERT().
+
+ @param Address The address that encodes the PCI Segment, Bus, Device, Function, and Register.
+ @param OrData The value to OR with the PCI configuration register.
+
+ @return The value written to the PCI configuration register.
+
+**/
+UINT32
+EFIAPI
+PciSegmentOr32 (
+ IN UINT64 Address,
+ IN UINT32 OrData
+ )
+{
+ return PciSegmentWrite32 (Address, PciSegmentRead32 (Address) | OrData);
+}
+
+/**
+ Performs a bitwise AND of a 32-bit PCI configuration register with a 32-bit value.
+
+ Reads the 32-bit PCI configuration register specified by Address,
+ performs a bitwise AND between the read result and the value specified by AndData,
+ and writes the result to the 32-bit PCI configuration register specified by Address.
+ The value written to the PCI configuration register is returned.
+ This function must guarantee that all PCI read and write operations are serialized.
+
+ If any reserved bits in Address are set, then ASSERT().
+ If Address is not aligned on a 32-bit boundary, then ASSERT().
+
+ @param Address The address that encodes the PCI Segment, Bus, Device, Function,
+ and Register.
+ @param AndData The value to AND with the PCI configuration register.
+
+ @return The value written to the PCI configuration register.
+
+**/
+UINT32
+EFIAPI
+PciSegmentAnd32 (
+ IN UINT64 Address,
+ IN UINT32 AndData
+ )
+{
+ return PciSegmentWrite32 (Address, PciSegmentRead32 (Address) & AndData);
+}
+
+/**
+ Performs a bitwise AND of a 32-bit PCI configuration register with a 32-bit value,
+ followed a bitwise OR with another 32-bit value.
+
+ Reads the 32-bit PCI configuration register specified by Address,
+ performs a bitwise AND between the read result and the value specified by AndData,
+ performs a bitwise OR between the result of the AND operation and the value specified by OrData,
+ and writes the result to the 32-bit PCI configuration register specified by Address.
+ The value written to the PCI configuration register is returned.
+ This function must guarantee that all PCI read and write operations are serialized.
+
+ If any reserved bits in Address are set, then ASSERT().
+ If Address is not aligned on a 32-bit boundary, then ASSERT().
+
+ @param Address The address that encodes the PCI Segment, Bus, Device, Function,
+ and Register.
+ @param AndData The value to AND with the PCI configuration register.
+ @param OrData The value to OR with the PCI configuration register.
+
+ @return The value written to the PCI configuration register.
+
+**/
+UINT32
+EFIAPI
+PciSegmentAndThenOr32 (
+ IN UINT64 Address,
+ IN UINT32 AndData,
+ IN UINT32 OrData
+ )
+{
+ return PciSegmentWrite32 (Address, (PciSegmentRead32 (Address) & AndData) | OrData);
+}
+
+/**
+ Reads a bit field of a PCI configuration register.
+
+ Reads the bit field in a 32-bit PCI configuration register. The bit field is
+ specified by the StartBit and the EndBit. The value of the bit field is
+ returned.
+
+ If any reserved bits in Address are set, then ASSERT().
+ If Address is not aligned on a 32-bit boundary, then ASSERT().
+ If StartBit is greater than 31, then ASSERT().
+ If EndBit is greater than 31, then ASSERT().
+ If EndBit is less than StartBit, then ASSERT().
+
+ @param Address The PCI configuration register to read.
+ @param StartBit The ordinal of the least significant bit in the bit field.
+ Range 0..31.
+ @param EndBit The ordinal of the most significant bit in the bit field.
+ Range 0..31.
+
+ @return The value of the bit field read from the PCI configuration register.
+
+**/
+UINT32
+EFIAPI
+PciSegmentBitFieldRead32 (
+ IN UINT64 Address,
+ IN UINTN StartBit,
+ IN UINTN EndBit
+ )
+{
+ return BitFieldRead32 (PciSegmentRead32 (Address), StartBit, EndBit);
+}
+
+/**
+ Writes a bit field to a PCI configuration register.
+
+ Writes Value to the bit field of the PCI configuration register. The bit
+ field is specified by the StartBit and the EndBit. All other bits in the
+ destination PCI configuration register are preserved. The new value of the
+ 32-bit register is returned.
+
+ If any reserved bits in Address are set, then ASSERT().
+ If Address is not aligned on a 32-bit boundary, then ASSERT().
+ If StartBit is greater than 31, then ASSERT().
+ If EndBit is greater than 31, then ASSERT().
+ If EndBit is less than StartBit, then ASSERT().
+ If Value is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT().
+
+ @param Address The PCI configuration register to write.
+ @param StartBit The ordinal of the least significant bit in the bit field.
+ Range 0..31.
+ @param EndBit The ordinal of the most significant bit in the bit field.
+ Range 0..31.
+ @param Value The new value of the bit field.
+
+ @return The value written back to the PCI configuration register.
+
+**/
+UINT32
+EFIAPI
+PciSegmentBitFieldWrite32 (
+ IN UINT64 Address,
+ IN UINTN StartBit,
+ IN UINTN EndBit,
+ IN UINT32 Value
+ )
+{
+ return PciSegmentWrite32 (
+ Address,
+ BitFieldWrite32 (PciSegmentRead32 (Address), StartBit, EndBit, Value)
+ );
+}
+
+/**
+ Reads a bit field in a 32-bit PCI configuration, performs a bitwise OR, and
+ writes the result back to the bit field in the 32-bit port.
+
+ Reads the 32-bit PCI configuration register specified by Address, performs a
+ bitwise OR between the read result and the value specified by
+ OrData, and writes the result to the 32-bit PCI configuration register
+ specified by Address. The value written to the PCI configuration register is
+ returned. This function must guarantee that all PCI read and write operations
+ are serialized. Extra left bits in OrData are stripped.
+
+ If any reserved bits in Address are set, then ASSERT().
+ If StartBit is greater than 31, then ASSERT().
+ If EndBit is greater than 31, then ASSERT().
+ If EndBit is less than StartBit, then ASSERT().
+ If OrData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT().
+
+ @param Address The PCI configuration register to write.
+ @param StartBit The ordinal of the least significant bit in the bit field.
+ Range 0..31.
+ @param EndBit The ordinal of the most significant bit in the bit field.
+ Range 0..31.
+ @param OrData The value to OR with the PCI configuration register.
+
+ @return The value written back to the PCI configuration register.
+
+**/
+UINT32
+EFIAPI
+PciSegmentBitFieldOr32 (
+ IN UINT64 Address,
+ IN UINTN StartBit,
+ IN UINTN EndBit,
+ IN UINT32 OrData
+ )
+{
+ return PciSegmentWrite32 (
+ Address,
+ BitFieldOr32 (PciSegmentRead32 (Address), StartBit, EndBit, OrData)
+ );
+}
+
+/**
+ Reads a bit field in a 32-bit PCI configuration register, performs a bitwise
+ AND, and writes the result back to the bit field in the 32-bit register.
+
+
+ Reads the 32-bit PCI configuration register specified by Address, performs a bitwise
+ AND between the read result and the value specified by AndData, and writes the result
+ to the 32-bit PCI configuration register specified by Address. The value written to
+ the PCI configuration register is returned. This function must guarantee that all PCI
+ read and write operations are serialized. Extra left bits in AndData are stripped.
+ If any reserved bits in Address are set, then ASSERT().
+ If Address is not aligned on a 32-bit boundary, then ASSERT().
+ If StartBit is greater than 31, then ASSERT().
+ If EndBit is greater than 31, then ASSERT().
+ If EndBit is less than StartBit, then ASSERT().
+ If AndData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT().
+
+ @param Address The PCI configuration register to write.
+ @param StartBit The ordinal of the least significant bit in the bit field.
+ Range 0..31.
+ @param EndBit The ordinal of the most significant bit in the bit field.
+ Range 0..31.
+ @param AndData The value to AND with the PCI configuration register.
+
+ @return The value written back to the PCI configuration register.
+
+**/
+UINT32
+EFIAPI
+PciSegmentBitFieldAnd32 (
+ IN UINT64 Address,
+ IN UINTN StartBit,
+ IN UINTN EndBit,
+ IN UINT32 AndData
+ )
+{
+ return PciSegmentWrite32 (
+ Address,
+ BitFieldAnd32 (PciSegmentRead32 (Address), StartBit, EndBit, AndData)
+ );
+}
+
+/**
+ Reads a bit field in a 32-bit port, performs a bitwise AND followed by a
+ bitwise OR, and writes the result back to the bit field in the
+ 32-bit port.
+
+ Reads the 32-bit PCI configuration register specified by Address, performs a
+ bitwise AND followed by a bitwise OR between the read result and
+ the value specified by AndData, and writes the result to the 32-bit PCI
+ configuration register specified by Address. The value written to the PCI
+ configuration register is returned. This function must guarantee that all PCI
+ read and write operations are serialized. Extra left bits in both AndData and
+ OrData are stripped.
+
+ If any reserved bits in Address are set, then ASSERT().
+ If StartBit is greater than 31, then ASSERT().
+ If EndBit is greater than 31, then ASSERT().
+ If EndBit is less than StartBit, then ASSERT().
+ If AndData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT().
+ If OrData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT().
+
+ @param Address The PCI configuration register to write.
+ @param StartBit The ordinal of the least significant bit in the bit field.
+ Range 0..31.
+ @param EndBit The ordinal of the most significant bit in the bit field.
+ Range 0..31.
+ @param AndData The value to AND with the PCI configuration register.
+ @param OrData The value to OR with the result of the AND operation.
+
+ @return The value written back to the PCI configuration register.
+
+**/
+UINT32
+EFIAPI
+PciSegmentBitFieldAndThenOr32 (
+ IN UINT64 Address,
+ IN UINTN StartBit,
+ IN UINTN EndBit,
+ IN UINT32 AndData,
+ IN UINT32 OrData
+ )
+{
+ return PciSegmentWrite32 (
+ Address,
+ BitFieldAndThenOr32 (PciSegmentRead32 (Address), StartBit, EndBit, AndData, OrData)
+ );
+}
+
+/**
+ Reads a range of PCI configuration registers into a caller supplied buffer.
+
+ Reads the range of PCI configuration registers specified by StartAddress and
+ Size into the buffer specified by Buffer. This function only allows the PCI
+ configuration registers from a single PCI function to be read. Size is
+ returned. When possible 32-bit PCI configuration read cycles are used to read
+ from StartAdress to StartAddress + Size. Due to alignment restrictions, 8-bit
+ and 16-bit PCI configuration read cycles may be used at the beginning and the
+ end of the range.
+
+ If any reserved bits in StartAddress are set, then ASSERT().
+ If ((StartAddress & 0xFFF) + Size) > 0x1000, then ASSERT().
+ If Size > 0 and Buffer is NULL, then ASSERT().
+
+ @param StartAddress The starting address that encodes the PCI Segment, Bus,
+ Device, Function and Register.
+ @param Size The size in bytes of the transfer.
+ @param Buffer The pointer to a buffer receiving the data read.
+
+ @return Size
+
+**/
+UINTN
+EFIAPI
+PciSegmentReadBuffer (
+ IN UINT64 StartAddress,
+ IN UINTN Size,
+ OUT VOID *Buffer
+ )
+{
+ UINTN ReturnValue;
+
+ ASSERT_INVALID_PCI_SEGMENT_ADDRESS (StartAddress, 0);
+ ASSERT (((StartAddress & 0xFFF) + Size) <= 0x1000);
+
+ if (Size == 0) {
+ return Size;
+ }
+
+ ASSERT (Buffer != NULL);
+
+ //
+ // Save Size for return
+ //
+ ReturnValue = Size;
+
+ if ((StartAddress & BIT0) != 0) {
+ //
+ // Read a byte if StartAddress is byte aligned
+ //
+ *(volatile UINT8 *)Buffer = PciSegmentRead8 (StartAddress);
+ StartAddress += sizeof (UINT8);
+ Size -= sizeof (UINT8);
+ Buffer = (UINT8*)Buffer + 1;
+ }
+
+ if (Size >= sizeof (UINT16) && (StartAddress & BIT1) != 0) {
+ //
+ // Read a word if StartAddress is word aligned
+ //
+ WriteUnaligned16 (Buffer, PciSegmentRead16 (StartAddress));
+ StartAddress += sizeof (UINT16);
+ Size -= sizeof (UINT16);
+ Buffer = (UINT16*)Buffer + 1;
+ }
+
+ while (Size >= sizeof (UINT32)) {
+ //
+ // Read as many double words as possible
+ //
+ WriteUnaligned32 (Buffer, PciSegmentRead32 (StartAddress));
+ StartAddress += sizeof (UINT32);
+ Size -= sizeof (UINT32);
+ Buffer = (UINT32*)Buffer + 1;
+ }
+
+ if (Size >= sizeof (UINT16)) {
+ //
+ // Read the last remaining word if exist
+ //
+ WriteUnaligned16 (Buffer, PciSegmentRead16 (StartAddress));
+ StartAddress += sizeof (UINT16);
+ Size -= sizeof (UINT16);
+ Buffer = (UINT16*)Buffer + 1;
+ }
+
+ if (Size >= sizeof (UINT8)) {
+ //
+ // Read the last remaining byte if exist
+ //
+ *(volatile UINT8 *)Buffer = PciSegmentRead8 (StartAddress);
+ }
+
+ return ReturnValue;
+}
+
+
+/**
+ Copies the data in a caller supplied buffer to a specified range of PCI
+ configuration space.
+
+ Writes the range of PCI configuration registers specified by StartAddress and
+ Size from the buffer specified by Buffer. This function only allows the PCI
+ configuration registers from a single PCI function to be written. Size is
+ returned. When possible 32-bit PCI configuration write cycles are used to
+ write from StartAdress to StartAddress + Size. Due to alignment restrictions,
+ 8-bit and 16-bit PCI configuration write cycles may be used at the beginning
+ and the end of the range.
+
+ If any reserved bits in StartAddress are set, then ASSERT().
+ If ((StartAddress & 0xFFF) + Size) > 0x1000, then ASSERT().
+ If Size > 0 and Buffer is NULL, then ASSERT().
+
+ @param StartAddress The starting address that encodes the PCI Segment, Bus,
+ Device, Function and Register.
+ @param Size The size in bytes of the transfer.
+ @param Buffer The pointer to a buffer containing the data to write.
+
+ @return The parameter of Size.
+
+**/
+UINTN
+EFIAPI
+PciSegmentWriteBuffer (
+ IN UINT64 StartAddress,
+ IN UINTN Size,
+ IN VOID *Buffer
+ )
+{
+ UINTN ReturnValue;
+
+ ASSERT_INVALID_PCI_SEGMENT_ADDRESS (StartAddress, 0);
+ ASSERT (((StartAddress & 0xFFF) + Size) <= 0x1000);
+
+ if (Size == 0) {
+ return 0;
+ }
+
+ ASSERT (Buffer != NULL);
+
+ //
+ // Save Size for return
+ //
+ ReturnValue = Size;
+
+ if ((StartAddress & BIT0) != 0) {
+ //
+ // Write a byte if StartAddress is byte aligned
+ //
+ PciSegmentWrite8 (StartAddress, *(UINT8*)Buffer);
+ StartAddress += sizeof (UINT8);
+ Size -= sizeof (UINT8);
+ Buffer = (UINT8*)Buffer + 1;
+ }
+
+ if (Size >= sizeof (UINT16) && (StartAddress & BIT1) != 0) {
+ //
+ // Write a word if StartAddress is word aligned
+ //
+ PciSegmentWrite16 (StartAddress, ReadUnaligned16 (Buffer));
+ StartAddress += sizeof (UINT16);
+ Size -= sizeof (UINT16);
+ Buffer = (UINT16*)Buffer + 1;
+ }
+
+ while (Size >= sizeof (UINT32)) {
+ //
+ // Write as many double words as possible
+ //
+ PciSegmentWrite32 (StartAddress, ReadUnaligned32 (Buffer));
+ StartAddress += sizeof (UINT32);
+ Size -= sizeof (UINT32);
+ Buffer = (UINT32*)Buffer + 1;
+ }
+
+ if (Size >= sizeof (UINT16)) {
+ //
+ // Write the last remaining word if exist
+ //
+ PciSegmentWrite16 (StartAddress, ReadUnaligned16 (Buffer));
+ StartAddress += sizeof (UINT16);
+ Size -= sizeof (UINT16);
+ Buffer = (UINT16*)Buffer + 1;
+ }
+
+ if (Size >= sizeof (UINT8)) {
+ //
+ // Write the last remaining byte if exist
+ //
+ PciSegmentWrite8 (StartAddress, *(UINT8*)Buffer);
+ }
+
+ return ReturnValue;
+}
--
2.17.0
^ permalink raw reply related [flat|nested] 16+ messages in thread
* [PATCH edk2-platforms v1 11/13] Hisilicon/D0x: Switch to generic PciHostBridge driver
2018-07-20 8:02 [PATCH edk2-platforms v1 00/13] Switching to generic PciHostBridge driver Ming Huang
` (9 preceding siblings ...)
2018-07-20 8:02 ` [PATCH edk2-platforms v1 10/13] Hisilicon: add PciSegmentLib for Hi161x Ming Huang
@ 2018-07-20 8:02 ` Ming Huang
2018-07-20 8:02 ` [PATCH edk2-platforms v1 12/13] Hisilicon: remove platform specific PciHostBridge Ming Huang
2018-07-20 8:02 ` [PATCH edk2-platforms v1 13/13] Hisilicon/PlatformPciLib: clear redundant felds in RESOURCE_APPETURE Ming Huang
12 siblings, 0 replies; 16+ messages in thread
From: Ming Huang @ 2018-07-20 8:02 UTC (permalink / raw)
To: leif.lindholm, linaro-uefi, edk2-devel, graeme.gregory
Cc: ard.biesheuvel, guoheyi, wanghuiqiang, huangming23, zhangjinsong2,
huangdaode, john.garry, Heyi Guo, Ming Huang, Michael D Kinney,
Haojian Zhuang
From: Heyi Guo <heyi.guo@linaro.org>
Address translation support is added to generic PciHostBridge driver
in edk2 by commit 74d0a33, so we can switch to it for Hisilicon D03
and D05 which are using address translation between device address and
host address for resource BAR.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Heyi Guo <heyi.guo@linaro.org>
Signed-off-by: Ming Huang <ming.huang@linaro.org>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Haojian Zhuang <haojian.zhuang@linaro.org>
---
Platform/Hisilicon/D03/D03.dsc | 13 ++++++++++---
Platform/Hisilicon/D03/D03.fdf | 3 ++-
Platform/Hisilicon/D05/D05.dsc | 13 ++++++++++---
Platform/Hisilicon/D05/D05.fdf | 3 ++-
Silicon/Hisilicon/Hisilicon.dsc.inc | 6 +++++-
5 files changed, 29 insertions(+), 9 deletions(-)
diff --git a/Platform/Hisilicon/D03/D03.dsc b/Platform/Hisilicon/D03/D03.dsc
index 6ceebba4ee..9e766a05a0 100644
--- a/Platform/Hisilicon/D03/D03.dsc
+++ b/Platform/Hisilicon/D03/D03.dsc
@@ -81,7 +81,11 @@
UefiUsbLib|MdePkg/Library/UefiUsbLib/UefiUsbLib.inf
LpcLib|Silicon/Hisilicon/Hi1610/Library/LpcLib/LpcLib.inf
+ PlatformPciLib|Platform/Hisilicon/D05/Library/PlatformPciLib/PlatformPciLib.inf
SerialPortLib|Silicon/Hisilicon/Hi1610/Library/Uart/LpcSerialPortLib/LpcSerialPortLib.inf
+ PciHostBridgeLib|Platform/Hisilicon/Library/PciHostBridgeLib/PciHostBridgeLib.inf
+ PciSegmentLib|Silicon/Hisilicon/Hi1610/Library/Hi161xPciSegmentLib/Hi161xPciSegmentLib.inf
+ PciPlatformLib|Silicon/Hisilicon/Hi1610/Library/Hi161xPciPlatformLib/Hi161xPciPlatformLib.inf
## GIC on D02/D03 is not fully ARM GIC compatible: IRQ cannot be cancelled when
## input signal is de-asserted, except for virtual timer interrupt IRQ #27.
@@ -337,6 +341,7 @@
ArmPkg/Drivers/CpuDxe/CpuDxe.inf
MdeModulePkg/Core/RuntimeDxe/RuntimeDxe.inf
+ Silicon/Hisilicon/Drivers/ArmPciCpuIo2Dxe/ArmPciCpuIo2Dxe.inf
Platform/Hisilicon/D03/Drivers/OemNicConfig2PHi1610/OemNicConfig2P.inf
Platform/Hisilicon/D03/Drivers/SFC/SfcDxeDriver.inf
@@ -458,10 +463,12 @@
<LibraryClasses>
NULL|Platform/Hisilicon/D03/Library/PlatformPciLib/PlatformPciLib.inf
}
- Silicon/Hisilicon/Drivers/PciPlatform/PciPlatform.inf
- Silicon/Hisilicon/Drivers/PciHostBridgeDxe/PciHostBridgeDxe.inf {
+ Silicon/Hisilicon/Drivers/PciPlatform/PciPlatform.inf {
+ <LibraryClasses>
+ NULL|Platform/Hisilicon/D05/Library/PlatformPciLib/PlatformPciLib.inf
+ }
+ MdeModulePkg/Bus/Pci/PciHostBridgeDxe/PciHostBridgeDxe.inf {
<LibraryClasses>
- DmaLib|EmbeddedPkg/Library/CoherentDmaLib/CoherentDmaLib.inf
NULL|Platform/Hisilicon/D03/Library/PlatformPciLib/PlatformPciLib.inf
}
diff --git a/Platform/Hisilicon/D03/D03.fdf b/Platform/Hisilicon/D03/D03.fdf
index 264d134f98..cc15a5469c 100644
--- a/Platform/Hisilicon/D03/D03.fdf
+++ b/Platform/Hisilicon/D03/D03.fdf
@@ -157,6 +157,7 @@ READ_LOCK_STATUS = TRUE
INF MdeModulePkg/Core/RuntimeDxe/RuntimeDxe.inf
INF MdeModulePkg/Universal/SecurityStubDxe/SecurityStubDxe.inf
+ INF Silicon/Hisilicon/Drivers/ArmPciCpuIo2Dxe/ArmPciCpuIo2Dxe.inf
INF Platform/Hisilicon/D03/Drivers/SFC/SfcDxeDriver.inf
INF Platform/Hisilicon/D03/Drivers/OemNicConfig2PHi1610/OemNicConfig2P.inf
@@ -264,7 +265,7 @@ READ_LOCK_STATUS = TRUE
#
INF Silicon/Hisilicon/Hi1610/Drivers/PcieInit1610/PcieInitDxe.inf
INF Silicon/Hisilicon/Drivers/PciPlatform/PciPlatform.inf
- INF Silicon/Hisilicon/Drivers/PciHostBridgeDxe/PciHostBridgeDxe.inf
+ INF MdeModulePkg/Bus/Pci/PciHostBridgeDxe/PciHostBridgeDxe.inf
INF MdeModulePkg/Bus/Pci/PciBusDxe/PciBusDxe.inf
INF Platform/Hisilicon/D03/Drivers/ReportPciePlugDidVidToBmc/ReportPciePlugDidVidToBmc.inf
diff --git a/Platform/Hisilicon/D05/D05.dsc b/Platform/Hisilicon/D05/D05.dsc
index 585184654b..db8cf2b8f9 100644
--- a/Platform/Hisilicon/D05/D05.dsc
+++ b/Platform/Hisilicon/D05/D05.dsc
@@ -97,6 +97,10 @@
LpcLib|Silicon/Hisilicon/Hi1610/Library/LpcLib/LpcLib.inf
SerialPortLib|ArmPlatformPkg/Library/PL011SerialPortLib/PL011SerialPortLib.inf
+ PlatformPciLib|Platform/Hisilicon/D05/Library/PlatformPciLib/PlatformPciLib.inf
+ PciHostBridgeLib|Platform/Hisilicon/Library/PciHostBridgeLib/PciHostBridgeLib.inf
+ PciSegmentLib|Silicon/Hisilicon/Hi1610/Library/Hi161xPciSegmentLib/Hi161xPciSegmentLib.inf
+ PciPlatformLib|Silicon/Hisilicon/Hi1610/Library/Hi161xPciPlatformLib/Hi161xPciPlatformLib.inf
[LibraryClasses.common.SEC]
ArmPlatformLib|Silicon/Hisilicon/Library/ArmPlatformLibHisilicon/ArmPlatformLibSec.inf
@@ -472,6 +476,7 @@
ArmPkg/Drivers/CpuDxe/CpuDxe.inf
MdeModulePkg/Core/RuntimeDxe/RuntimeDxe.inf
+ Silicon/Hisilicon/Drivers/ArmPciCpuIo2Dxe/ArmPciCpuIo2Dxe.inf
Platform/Hisilicon/D03/Drivers/OemNicConfig2PHi1610/OemNicConfig2P.inf
Platform/Hisilicon/D05/Drivers/SFC/SfcDxeDriver.inf
@@ -611,10 +616,12 @@
<LibraryClasses>
NULL|Platform/Hisilicon/D05/Library/PlatformPciLib/PlatformPciLib.inf
}
- Silicon/Hisilicon/Drivers/PciPlatform/PciPlatform.inf
- Silicon/Hisilicon/Drivers/PciHostBridgeDxe/PciHostBridgeDxe.inf {
+ Silicon/Hisilicon/Drivers/PciPlatform/PciPlatform.inf {
+ <LibraryClasses>
+ NULL|Platform/Hisilicon/D05/Library/PlatformPciLib/PlatformPciLib.inf
+ }
+ MdeModulePkg/Bus/Pci/PciHostBridgeDxe/PciHostBridgeDxe.inf {
<LibraryClasses>
- DmaLib|EmbeddedPkg/Library/CoherentDmaLib/CoherentDmaLib.inf
NULL|Platform/Hisilicon/D05/Library/PlatformPciLib/PlatformPciLib.inf
}
diff --git a/Platform/Hisilicon/D05/D05.fdf b/Platform/Hisilicon/D05/D05.fdf
index 2fa7a63d72..6ca2b45345 100644
--- a/Platform/Hisilicon/D05/D05.fdf
+++ b/Platform/Hisilicon/D05/D05.fdf
@@ -161,6 +161,7 @@ READ_LOCK_STATUS = TRUE
INF MdeModulePkg/Core/RuntimeDxe/RuntimeDxe.inf
INF MdeModulePkg/Universal/SecurityStubDxe/SecurityStubDxe.inf
+ INF Silicon/Hisilicon/Drivers/ArmPciCpuIo2Dxe/ArmPciCpuIo2Dxe.inf
INF Platform/Hisilicon/D05/Drivers/SFC/SfcDxeDriver.inf
INF Platform/Hisilicon/D03/Drivers/OemNicConfig2PHi1610/OemNicConfig2P.inf
@@ -286,7 +287,7 @@ READ_LOCK_STATUS = TRUE
#
INF Silicon/Hisilicon/Hi1610/Drivers/PcieInit1610/PcieInitDxe.inf
INF Silicon/Hisilicon/Drivers/PciPlatform/PciPlatform.inf
- INF Silicon/Hisilicon/Drivers/PciHostBridgeDxe/PciHostBridgeDxe.inf
+ INF MdeModulePkg/Bus/Pci/PciHostBridgeDxe/PciHostBridgeDxe.inf
INF MdeModulePkg/Bus/Pci/PciBusDxe/PciBusDxe.inf
INF Platform/Hisilicon/D05/Drivers/ReportPciePlugDidVidToBmc/ReportPciePlugDidVidToBmc.inf
diff --git a/Silicon/Hisilicon/Hisilicon.dsc.inc b/Silicon/Hisilicon/Hisilicon.dsc.inc
index 20ff1ec25b..3ac8e20232 100644
--- a/Silicon/Hisilicon/Hisilicon.dsc.inc
+++ b/Silicon/Hisilicon/Hisilicon.dsc.inc
@@ -254,7 +254,11 @@
[PcdsFixedAtBuild.common]
gEmbeddedTokenSpaceGuid.PcdPrePiCpuMemorySize|44
- gEmbeddedTokenSpaceGuid.PcdPrePiCpuIoSize|0
+ #
+ # IO is mapped to memory space, so we use the same size of
+ # PcdPrePiCpuMemorySize
+ #
+ gEmbeddedTokenSpaceGuid.PcdPrePiCpuIoSize|44
gEfiMdePkgTokenSpaceGuid.PcdMaximumUnicodeStringLength|1000000
gEfiMdePkgTokenSpaceGuid.PcdMaximumAsciiStringLength|1000000
gEfiMdePkgTokenSpaceGuid.PcdMaximumLinkedListLength|1000000
--
2.17.0
^ permalink raw reply related [flat|nested] 16+ messages in thread
* [PATCH edk2-platforms v1 12/13] Hisilicon: remove platform specific PciHostBridge
2018-07-20 8:02 [PATCH edk2-platforms v1 00/13] Switching to generic PciHostBridge driver Ming Huang
` (10 preceding siblings ...)
2018-07-20 8:02 ` [PATCH edk2-platforms v1 11/13] Hisilicon/D0x: Switch to generic PciHostBridge driver Ming Huang
@ 2018-07-20 8:02 ` Ming Huang
2018-07-20 8:02 ` [PATCH edk2-platforms v1 13/13] Hisilicon/PlatformPciLib: clear redundant felds in RESOURCE_APPETURE Ming Huang
12 siblings, 0 replies; 16+ messages in thread
From: Ming Huang @ 2018-07-20 8:02 UTC (permalink / raw)
To: leif.lindholm, linaro-uefi, edk2-devel, graeme.gregory
Cc: ard.biesheuvel, guoheyi, wanghuiqiang, huangming23, zhangjinsong2,
huangdaode, john.garry, Heyi Guo, Yi Li, Michael D Kinney
From: Heyi Guo <heyi.guo@linaro.org>
PciHostBridge in Silicon/Hisilicon is specific for D03/D05. After we
switch to generic PciHostBridge in MdeModulePkg, this driver is
useless and can be removed.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Heyi Guo <heyi.guo@linaro.org>
Signed-off-by: Yi Li <phoenix.liyi@huawei.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
---
Silicon/Hisilicon/Drivers/PciHostBridgeDxe/PciHostBridge.c | 1658 ---------------
Silicon/Hisilicon/Drivers/PciHostBridgeDxe/PciHostBridge.h | 520 -----
Silicon/Hisilicon/Drivers/PciHostBridgeDxe/PciHostBridgeDxe.inf | 74 -
Silicon/Hisilicon/Drivers/PciHostBridgeDxe/PciRootBridgeIo.c | 2220 --------------------
4 files changed, 4472 deletions(-)
diff --git a/Silicon/Hisilicon/Drivers/PciHostBridgeDxe/PciHostBridge.c b/Silicon/Hisilicon/Drivers/PciHostBridgeDxe/PciHostBridge.c
deleted file mode 100644
index e3d3988a64..0000000000
--- a/Silicon/Hisilicon/Drivers/PciHostBridgeDxe/PciHostBridge.c
+++ /dev/null
@@ -1,1658 +0,0 @@
-/**
- * Copyright (c) 2014, AppliedMicro Corp. All rights reserved.
- * Copyright (c) 2016, Hisilicon Limited. All rights reserved.
- * Copyright (c) 2016, Linaro Limited. All rights reserved.
- *
- * This program and the accompanying materials
- * are licensed and made available under the terms and conditions of the BSD License
- * which accompanies this distribution. The full text of the license may be found at
- * http://opensource.org/licenses/bsd-license.php
- *
- * THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
- * WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
- *
- **/
-
-#include <Uefi.h>
-#include <Protocol/EmbeddedGpio.h>
-#include <Guid/EventGroup.h>
-#include <Library/UefiBootServicesTableLib.h>
-#include <Library/UefiRuntimeServicesTableLib.h>
-#include <Library/OemMiscLib.h>
-
-#include "PciHostBridge.h"
-
-UINTN RootBridgeNumber[PCIE_MAX_HOSTBRIDGE] = { PCIE_MAX_ROOTBRIDGE,PCIE_MAX_ROOTBRIDGE };
-
-UINT64 RootBridgeAttribute[PCIE_MAX_HOSTBRIDGE][PCIE_MAX_ROOTBRIDGE] = {
- { //Host Bridge0
- EFI_PCI_HOST_BRIDGE_MEM64_DECODE,
- EFI_PCI_HOST_BRIDGE_MEM64_DECODE,
- EFI_PCI_HOST_BRIDGE_MEM64_DECODE,
- EFI_PCI_HOST_BRIDGE_MEM64_DECODE,
- EFI_PCI_HOST_BRIDGE_MEM64_DECODE,
- EFI_PCI_HOST_BRIDGE_MEM64_DECODE,
- EFI_PCI_HOST_BRIDGE_MEM64_DECODE,
- EFI_PCI_HOST_BRIDGE_MEM64_DECODE,
- },
- { //Host Bridge1
- EFI_PCI_HOST_BRIDGE_MEM64_DECODE,
- EFI_PCI_HOST_BRIDGE_MEM64_DECODE,
- EFI_PCI_HOST_BRIDGE_MEM64_DECODE,
- EFI_PCI_HOST_BRIDGE_MEM64_DECODE,
- EFI_PCI_HOST_BRIDGE_MEM64_DECODE,
- EFI_PCI_HOST_BRIDGE_MEM64_DECODE,
- EFI_PCI_HOST_BRIDGE_MEM64_DECODE,
- EFI_PCI_HOST_BRIDGE_MEM64_DECODE,
- }
- };
-
-EFI_PCI_ROOT_BRIDGE_DEVICE_PATH mEfiPciRootBridgeDevicePath[PCIE_MAX_HOSTBRIDGE][PCIE_MAX_ROOTBRIDGE] = {
- { //Host Bridge0
- /* Port 0 */
- {
- {
- {
- ACPI_DEVICE_PATH,
- ACPI_DP,
- {
- (UINT8) (sizeof(ACPI_HID_DEVICE_PATH)),
- (UINT8) ((sizeof(ACPI_HID_DEVICE_PATH)) >> 8)
- }
- },
- EISA_PNP_ID(0x0A03),
- 0
- },
-
- {
- END_DEVICE_PATH_TYPE,
- END_ENTIRE_DEVICE_PATH_SUBTYPE,
- {
- END_DEVICE_PATH_LENGTH,
- 0
- }
- }
- },
- /* Port 1 */
- {
- {
- {
- ACPI_DEVICE_PATH,
- ACPI_DP,
- {
- (UINT8) (sizeof(ACPI_HID_DEVICE_PATH)),
- (UINT8) ((sizeof(ACPI_HID_DEVICE_PATH)) >> 8)
- }
- },
- EISA_PNP_ID(0x0A04),
- 0
- },
-
- {
- END_DEVICE_PATH_TYPE,
- END_ENTIRE_DEVICE_PATH_SUBTYPE,
- {
- END_DEVICE_PATH_LENGTH,
- 0
- }
- }
- },
- /* Port 2 */
- {
- {
- {
- ACPI_DEVICE_PATH,
- ACPI_DP,
- {
- (UINT8) (sizeof(ACPI_HID_DEVICE_PATH)),
- (UINT8) ((sizeof(ACPI_HID_DEVICE_PATH)) >> 8)
- }
- },
- EISA_PNP_ID(0x0A05),
- 0
- },
-
- {
- END_DEVICE_PATH_TYPE,
- END_ENTIRE_DEVICE_PATH_SUBTYPE,
- {
- END_DEVICE_PATH_LENGTH,
- 0
- }
- }
- },
- /* Port 3 */
- {
- {
- {
- ACPI_DEVICE_PATH,
- ACPI_DP,
- {
- (UINT8) (sizeof(ACPI_HID_DEVICE_PATH)),
- (UINT8) ((sizeof(ACPI_HID_DEVICE_PATH)) >> 8)
- }
- },
- EISA_PNP_ID(0x0A06),
- 0
- },
-
- {
- END_DEVICE_PATH_TYPE,
- END_ENTIRE_DEVICE_PATH_SUBTYPE,
- {
- END_DEVICE_PATH_LENGTH,
- 0
- }
- }
- },
- /* Port 4 */
- {
- {
- {
- ACPI_DEVICE_PATH,
- ACPI_DP,
- {
- (UINT8) (sizeof(ACPI_HID_DEVICE_PATH)),
- (UINT8) ((sizeof(ACPI_HID_DEVICE_PATH)) >> 8)
- }
- },
- EISA_PNP_ID(0x0A07),
- 0
- },
-
- {
- END_DEVICE_PATH_TYPE,
- END_ENTIRE_DEVICE_PATH_SUBTYPE,
- {
- END_DEVICE_PATH_LENGTH,
- 0
- }
- }
- },
- /* Port 5 */
- {
- {
- {
- ACPI_DEVICE_PATH,
- ACPI_DP,
- {
- (UINT8) (sizeof(ACPI_HID_DEVICE_PATH)),
- (UINT8) ((sizeof(ACPI_HID_DEVICE_PATH)) >> 8)
- }
- },
- EISA_PNP_ID(0x0A08),
- 0
- },
-
- {
- END_DEVICE_PATH_TYPE,
- END_ENTIRE_DEVICE_PATH_SUBTYPE,
- {
- END_DEVICE_PATH_LENGTH,
- 0
- }
- }
- },
- /* Port 6 */
- {
- {
- {
- ACPI_DEVICE_PATH,
- ACPI_DP,
- {
- (UINT8) (sizeof(ACPI_HID_DEVICE_PATH)),
- (UINT8) ((sizeof(ACPI_HID_DEVICE_PATH)) >> 8)
- }
- },
- EISA_PNP_ID(0x0A09),
- 0
- },
-
- {
- END_DEVICE_PATH_TYPE,
- END_ENTIRE_DEVICE_PATH_SUBTYPE,
- {
- END_DEVICE_PATH_LENGTH,
- 0
- }
- }
- },
- /* Port 7 */
- {
- {
- {
- ACPI_DEVICE_PATH,
- ACPI_DP,
- {
- (UINT8) (sizeof(ACPI_HID_DEVICE_PATH)),
- (UINT8) ((sizeof(ACPI_HID_DEVICE_PATH)) >> 8)
- }
- },
- EISA_PNP_ID(0x0A0A),
- 0
- },
-
- {
- END_DEVICE_PATH_TYPE,
- END_ENTIRE_DEVICE_PATH_SUBTYPE,
- {
- END_DEVICE_PATH_LENGTH,
- 0
- }
- }
- }
-},
-{ // Host Bridge1
- /* Port 0 */
- {
- {
- {
- ACPI_DEVICE_PATH,
- ACPI_DP,
- {
- (UINT8) (sizeof(ACPI_HID_DEVICE_PATH)),
- (UINT8) ((sizeof(ACPI_HID_DEVICE_PATH)) >> 8)
- }
- },
- EISA_PNP_ID(0x0A0B),
- 0
- },
-
- {
- END_DEVICE_PATH_TYPE,
- END_ENTIRE_DEVICE_PATH_SUBTYPE,
- {
- END_DEVICE_PATH_LENGTH,
- 0
- }
- }
- },
- /* Port 1 */
- {
- {
- {
- ACPI_DEVICE_PATH,
- ACPI_DP,
- {
- (UINT8) (sizeof(ACPI_HID_DEVICE_PATH)),
- (UINT8) ((sizeof(ACPI_HID_DEVICE_PATH)) >> 8)
- }
- },
- EISA_PNP_ID(0x0A0C),
- 0
- },
-
- {
- END_DEVICE_PATH_TYPE,
- END_ENTIRE_DEVICE_PATH_SUBTYPE,
- {
- END_DEVICE_PATH_LENGTH,
- 0
- }
- }
- },
- /* Port 2 */
- {
- {
- {
- ACPI_DEVICE_PATH,
- ACPI_DP,
- {
- (UINT8) (sizeof(ACPI_HID_DEVICE_PATH)),
- (UINT8) ((sizeof(ACPI_HID_DEVICE_PATH)) >> 8)
- }
- },
- EISA_PNP_ID(0x0A0D),
- 0
- },
-
- {
- END_DEVICE_PATH_TYPE,
- END_ENTIRE_DEVICE_PATH_SUBTYPE,
- {
- END_DEVICE_PATH_LENGTH,
- 0
- }
- }
- },
- /* Port 3 */
- {
- {
- {
- ACPI_DEVICE_PATH,
- ACPI_DP,
- {
- (UINT8) (sizeof(ACPI_HID_DEVICE_PATH)),
- (UINT8) ((sizeof(ACPI_HID_DEVICE_PATH)) >> 8)
- }
- },
- EISA_PNP_ID(0x0A0E),
- 0
- },
-
- {
- END_DEVICE_PATH_TYPE,
- END_ENTIRE_DEVICE_PATH_SUBTYPE,
- {
- END_DEVICE_PATH_LENGTH,
- 0
- }
- }
- },
- /* Port 4 */
- {
- {
- {
- ACPI_DEVICE_PATH,
- ACPI_DP,
- {
- (UINT8) (sizeof(ACPI_HID_DEVICE_PATH)),
- (UINT8) ((sizeof(ACPI_HID_DEVICE_PATH)) >> 8)
- }
- },
- EISA_PNP_ID(0x0A0F),
- 0
- },
-
- {
- END_DEVICE_PATH_TYPE,
- END_ENTIRE_DEVICE_PATH_SUBTYPE,
- {
- END_DEVICE_PATH_LENGTH,
- 0
- }
- }
- },
- /* Port 5 */
- {
- {
- {
- ACPI_DEVICE_PATH,
- ACPI_DP,
- {
- (UINT8) (sizeof(ACPI_HID_DEVICE_PATH)),
- (UINT8) ((sizeof(ACPI_HID_DEVICE_PATH)) >> 8)
- }
- },
- EISA_PNP_ID(0x0A10),
- 0
- },
-
- {
- END_DEVICE_PATH_TYPE,
- END_ENTIRE_DEVICE_PATH_SUBTYPE,
- {
- END_DEVICE_PATH_LENGTH,
- 0
- }
- }
- },
- /* Port 6 */
- {
- {
- {
- ACPI_DEVICE_PATH,
- ACPI_DP,
- {
- (UINT8) (sizeof(ACPI_HID_DEVICE_PATH)),
- (UINT8) ((sizeof(ACPI_HID_DEVICE_PATH)) >> 8)
- }
- },
- EISA_PNP_ID(0x0A11),
- 0
- },
-
- {
- END_DEVICE_PATH_TYPE,
- END_ENTIRE_DEVICE_PATH_SUBTYPE,
- {
- END_DEVICE_PATH_LENGTH,
- 0
- }
- }
- },
- /* Port 7 */
- {
- {
- {
- ACPI_DEVICE_PATH,
- ACPI_DP,
- {
- (UINT8) (sizeof(ACPI_HID_DEVICE_PATH)),
- (UINT8) ((sizeof(ACPI_HID_DEVICE_PATH)) >> 8)
- }
- },
- EISA_PNP_ID(0x0A12),
- 0
- },
-
- {
- END_DEVICE_PATH_TYPE,
- END_ENTIRE_DEVICE_PATH_SUBTYPE,
- {
- END_DEVICE_PATH_LENGTH,
- 0
- }
- }
- }
- }
-};
-
-EFI_HANDLE mDriverImageHandle;
-
-PCI_HOST_BRIDGE_INSTANCE mPciHostBridgeInstanceTemplate = {
- PCI_HOST_BRIDGE_SIGNATURE, // Signature
- NULL, // HostBridgeHandle
- 0, // RootBridgeNumber
- {NULL, NULL}, // Head
- FALSE, // ResourceSubiteed
- TRUE, // CanRestarted
- {
- NotifyPhase,
- GetNextRootBridge,
- GetAttributes,
- StartBusEnumeration,
- SetBusNumbers,
- SubmitResources,
- GetProposedResources,
- PreprocessController
- }
-};
-
-/**
- Entry point of this driver
-
- @param ImageHandle Handle of driver image
- @param SystemTable Point to EFI_SYSTEM_TABLE
-
- @retval EFI_OUT_OF_RESOURCES Can not allocate memory resource
- @retval EFI_DEVICE_ERROR Can not install the protocol instance
- @retval EFI_SUCCESS Success to initialize the Pci host bridge.
-**/
-EFI_STATUS
-EFIAPI
-InitializePciHostBridge (
- IN EFI_HANDLE ImageHandle,
- IN EFI_SYSTEM_TABLE *SystemTable
- )
-{
- EFI_STATUS Status;
- UINTN Loop1;
- UINTN Loop2;
- PCI_HOST_BRIDGE_INSTANCE *HostBridge = NULL;
- PCI_ROOT_BRIDGE_INSTANCE *PrivateData;
- UINT32 PcieRootBridgeMask;
-
- if (!OemIsMpBoot())
- {
- PcieRootBridgeMask = PcdGet32(PcdPcieRootBridgeMask);
- }
- else
- {
- PcieRootBridgeMask = PcdGet32(PcdPcieRootBridgeMask2P);
- }
-
- mDriverImageHandle = ImageHandle;
- //
- // Create Host Bridge Device Handle
- //
- //Each Host Bridge have 8 Root Bridges max, every bits of 0xFF(8 bit) stands for the according PCIe Port
- //is enable or not
- for (Loop1 = 0; Loop1 < PCIE_MAX_HOSTBRIDGE; Loop1++) {
- if (((PcieRootBridgeMask >> (PCIE_MAX_ROOTBRIDGE * Loop1)) & 0xFF ) == 0) {
- continue;
- }
-
-
- HostBridge = AllocateCopyPool (sizeof(PCI_HOST_BRIDGE_INSTANCE), &mPciHostBridgeInstanceTemplate);
- if (HostBridge == NULL) {
- return EFI_OUT_OF_RESOURCES;
- }
-
- HostBridge->RootBridgeNumber = RootBridgeNumber[Loop1];
- InitializeListHead (&HostBridge->Head);
-
- Status = gBS->InstallMultipleProtocolInterfaces (
- &HostBridge->HostBridgeHandle,
- &gEfiPciHostBridgeResourceAllocationProtocolGuid, &HostBridge->ResAlloc,
- NULL
- );
- if (EFI_ERROR (Status)) {
- FreePool (HostBridge);
- return EFI_DEVICE_ERROR;
- }
-
- //
- // Create Root Bridge Device Handle in this Host Bridge
- //
- for (Loop2 = 0; Loop2 < HostBridge->RootBridgeNumber; Loop2++) {
- if (!(((PcieRootBridgeMask >> (PCIE_MAX_ROOTBRIDGE * Loop1)) >> Loop2 ) & 0x01)) {
- continue;
- }
-
- PrivateData = AllocateZeroPool (sizeof(PCI_ROOT_BRIDGE_INSTANCE));
- if (PrivateData == NULL) {
- FreePool (HostBridge);
- return EFI_OUT_OF_RESOURCES;
- }
- PrivateData->Port = Loop2;
- PrivateData->SocType = PcdGet32(Pcdsoctype);
- PrivateData->Signature = PCI_ROOT_BRIDGE_SIGNATURE;
- PrivateData->DevicePath = (EFI_DEVICE_PATH_PROTOCOL *)&mEfiPciRootBridgeDevicePath[Loop1][Loop2];
-
- (VOID)RootBridgeConstructor (
- &PrivateData->Io,
- HostBridge->HostBridgeHandle,
- RootBridgeAttribute[Loop1][Loop2],
- &mResAppeture[Loop1][Loop2],
- Loop1
- );
-
- Status = gBS->InstallMultipleProtocolInterfaces(
- &PrivateData->Handle,
- &gEfiDevicePathProtocolGuid, PrivateData->DevicePath,
- &gEfiPciRootBridgeIoProtocolGuid, &PrivateData->Io,
- NULL
- );
- if (EFI_ERROR (Status)) {
- (VOID)gBS->UninstallMultipleProtocolInterfaces (
- HostBridge->HostBridgeHandle,
- &gEfiPciHostBridgeResourceAllocationProtocolGuid, &HostBridge->ResAlloc,
- NULL
- );
- FreePool(PrivateData);
- FreePool (HostBridge);
- return EFI_DEVICE_ERROR;
- }
- // PCI Memory Space
- Status = gDS->AddMemorySpace (
- EfiGcdMemoryTypeMemoryMappedIo,
- mResAppeture[Loop1][Loop2] .MemBase,
- mResAppeture[Loop1][Loop2] .MemLimit -mResAppeture[Loop1][Loop2] .MemBase + 1,
- 0
- );
- if (EFI_ERROR (Status)) {
- DEBUG((EFI_D_ERROR,"PCIE AddMemorySpace Error\n"));
- }
- InsertTailList (&HostBridge->Head, &PrivateData->Link);
- }
- }
-
- return EFI_SUCCESS;
-}
-
-EFI_STATUS
-EFIAPI
-NotifyAllocateMemResources(
- IN PCI_ROOT_BRIDGE_INSTANCE *RootBridgeInstance,
- IN PCI_RESOURCE_TYPE Index,
- IN OUT UINT64 *AllocatedLenMem
-)
-{
- EFI_PHYSICAL_ADDRESS BaseAddress;
- EFI_STATUS ReturnStatus;
- UINT64 AddrLen;
- UINTN BitsOfAlignment;
-
- AddrLen = RootBridgeInstance->ResAllocNode[Index].Length;
- PCIE_DEBUG("Addrlen:%llx\n", AddrLen);
- // Get the number of '1' in Alignment.
- BitsOfAlignment = (UINTN) (HighBitSet64 (RootBridgeInstance->ResAllocNode[Index].Alignment) + 1);
-
- BaseAddress = (RootBridgeInstance->MemBase + *AllocatedLenMem +
- RootBridgeInstance->ResAllocNode[Index].Alignment)
- & ~(RootBridgeInstance->ResAllocNode[Index].Alignment);
- if ((BaseAddress + AddrLen - 1) > RootBridgeInstance->MemLimit) {
- ReturnStatus = EFI_OUT_OF_RESOURCES;
- RootBridgeInstance->ResAllocNode[Index].Length = 0;
- return ReturnStatus;
- }
-
- PCIE_DEBUG("(P)Mem32/64 request memory at:%llx\n", BaseAddress);
- ReturnStatus = gDS->AllocateMemorySpace (
- EfiGcdAllocateAddress,
- EfiGcdMemoryTypeMemoryMappedIo,
- BitsOfAlignment,
- AddrLen,
- &BaseAddress,
- mDriverImageHandle,
- NULL
- );
-
- if (!EFI_ERROR (ReturnStatus)) {
- // We were able to allocate the PCI memory
- RootBridgeInstance->ResAllocNode[Index].Base = (UINTN)BaseAddress;
- RootBridgeInstance->ResAllocNode[Index].Status = ResAllocated;
- *AllocatedLenMem += AddrLen;
- PCIE_DEBUG("(P)Mem32/64 resource allocated:%llx\n", BaseAddress);
-
- } else {
- // Not able to allocate enough PCI memory
- if (ReturnStatus != EFI_OUT_OF_RESOURCES) {
- RootBridgeInstance->ResAllocNode[Index].Length = 0;
- }
- }
- return ReturnStatus;
-}
-
-EFI_STATUS
-EFIAPI
-NotifyAllocateResources(
- IN PCI_HOST_BRIDGE_INSTANCE *HostBridgeInstance
-)
-{
- EFI_STATUS ReturnStatus;
- LIST_ENTRY *List;
- PCI_ROOT_BRIDGE_INSTANCE *RootBridgeInstance;
- PCI_RESOURCE_TYPE Index;
-
- ReturnStatus = EFI_SUCCESS;
- List = HostBridgeInstance->Head.ForwardLink;
-
- while (List != &HostBridgeInstance->Head) {
- RootBridgeInstance = DRIVER_INSTANCE_FROM_LIST_ENTRY (List);
-
- UINT64 AllocatedLenMem = 0;
- for (Index = TypeIo; Index < TypeBus; Index++) {
- if (RootBridgeInstance->ResAllocNode[Index].Status != ResNone) {
- if(Index == TypeIo) {
- PCIE_DEBUG("NOT SUPPOER IO RESOURCES ON THIS PLATFORM\n");
- } else if ((Index >= TypeMem32) && (Index <= TypePMem64)) {
- ReturnStatus = NotifyAllocateMemResources(RootBridgeInstance,Index,&AllocatedLenMem);
- } else {
- ASSERT (FALSE);
- }
- }
- }
-
- List = List->ForwardLink;
- }
-
- return ReturnStatus;
-}
-
-EFI_STATUS
-EFIAPI
-NotifyFreeResources(
- IN PCI_HOST_BRIDGE_INSTANCE *HostBridgeInstance
-)
-{
- EFI_STATUS ReturnStatus;
- LIST_ENTRY *List;
- PCI_ROOT_BRIDGE_INSTANCE *RootBridgeInstance;
- PCI_RESOURCE_TYPE Index;
- UINT64 AddrLen;
- EFI_PHYSICAL_ADDRESS BaseAddress;
-
- ReturnStatus = EFI_SUCCESS;
- List = HostBridgeInstance->Head.ForwardLink;
- while (List != &HostBridgeInstance->Head) {
- RootBridgeInstance = DRIVER_INSTANCE_FROM_LIST_ENTRY (List);
- for (Index = TypeIo; Index < TypeBus; Index++) {
- if (RootBridgeInstance->ResAllocNode[Index].Status == ResAllocated) {
- AddrLen = RootBridgeInstance->ResAllocNode[Index].Length;
- BaseAddress = RootBridgeInstance->ResAllocNode[Index].Base;
-
- if(Index <= TypePMem64){
- ReturnStatus = gDS->FreeMemorySpace (BaseAddress, AddrLen);
- }else{
- ASSERT (FALSE);
- }
-
- RootBridgeInstance->ResAllocNode[Index].Type = Index;
- RootBridgeInstance->ResAllocNode[Index].Base = 0;
- RootBridgeInstance->ResAllocNode[Index].Length = 0;
- RootBridgeInstance->ResAllocNode[Index].Status = ResNone;
- }
- }
-
- List = List->ForwardLink;
- }
-
- HostBridgeInstance->ResourceSubmited = FALSE;
- HostBridgeInstance->CanRestarted = TRUE;
- return ReturnStatus;
-
-}
-
-VOID
-EFIAPI
-NotifyBeginEnumeration(
- IN PCI_HOST_BRIDGE_INSTANCE *HostBridgeInstance
-)
-{
- LIST_ENTRY *List;
- PCI_ROOT_BRIDGE_INSTANCE *RootBridgeInstance;
- PCI_RESOURCE_TYPE Index;
-
- //
- // Reset the Each Root Bridge
- //
- List = HostBridgeInstance->Head.ForwardLink;
-
- while (List != &HostBridgeInstance->Head) {
- RootBridgeInstance = DRIVER_INSTANCE_FROM_LIST_ENTRY (List);
- for (Index = TypeIo; Index < TypeMax; Index++) {
- RootBridgeInstance->ResAllocNode[Index].Type = Index;
- RootBridgeInstance->ResAllocNode[Index].Base = 0;
- RootBridgeInstance->ResAllocNode[Index].Length = 0;
- RootBridgeInstance->ResAllocNode[Index].Status = ResNone;
- }
-
- List = List->ForwardLink;
- }
-
- HostBridgeInstance->ResourceSubmited = FALSE;
- HostBridgeInstance->CanRestarted = TRUE;
-}
-
-/**
- These are the notifications from the PCI bus driver that it is about to enter a certain
- phase of the PCI enumeration process.
-
- This member function can be used to notify the host bridge driver to perform specific actions,
- including any chipset-specific initialization, so that the chipset is ready to enter the next phase.
- Eight notification points are defined at this time. See belows:
- EfiPciHostBridgeBeginEnumeration Resets the host bridge PCI apertures and internal data
- structures. The PCI enumerator should issue this notification
- before starting a fresh enumeration process. Enumeration cannot
- be restarted after sending any other notification such as
- EfiPciHostBridgeBeginBusAllocation.
- EfiPciHostBridgeBeginBusAllocation The bus allocation phase is about to begin. No specific action is
- required here. This notification can be used to perform any
- chipset-specific programming.
- EfiPciHostBridgeEndBusAllocation The bus allocation and bus programming phase is complete. No
- specific action is required here. This notification can be used to
- perform any chipset-specific programming.
- EfiPciHostBridgeBeginResourceAllocation
- The resource allocation phase is about to begin. No specific
- action is required here. This notification can be used to perform
- any chipset-specific programming.
- EfiPciHostBridgeAllocateResources Allocates resources per previously submitted requests for all the PCI
- root bridges. These resource settings are returned on the next call to
- GetProposedResources(). Before calling NotifyPhase() with a Phase of
- EfiPciHostBridgeAllocateResource, the PCI bus enumerator is responsible
- for gathering I/O and memory requests for
- all the PCI root bridges and submitting these requests using
- SubmitResources(). This function pads the resource amount
- to suit the root bridge hardware, takes care of dependencies between
- the PCI root bridges, and calls the Global Coherency Domain (GCD)
- with the allocation request. In the case of padding, the allocated range
- could be bigger than what was requested.
- EfiPciHostBridgeSetResources Programs the host bridge hardware to decode previously allocated
- resources (proposed resources) for all the PCI root bridges. After the
- hardware is programmed, reassigning resources will not be supported.
- The bus settings are not affected.
- EfiPciHostBridgeFreeResources Deallocates resources that were previously allocated for all the PCI
- root bridges and resets the I/O and memory apertures to their initial
- state. The bus settings are not affected. If the request to allocate
- resources fails, the PCI enumerator can use this notification to
- deallocate previous resources, adjust the requests, and retry
- allocation.
- EfiPciHostBridgeEndResourceAllocation The resource allocation phase is completed. No specific action is
- required here. This notification can be used to perform any chipsetspecific
- programming.
-
- @param[in] This The instance pointer of EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL
- @param[in] Phase The phase during enumeration
-
- @retval EFI_NOT_READY This phase cannot be entered at this time. For example, this error
- is valid for a Phase of EfiPciHostBridgeAllocateResources if
- SubmitResources() has not been called for one or more
- PCI root bridges before this call
- @retval EFI_DEVICE_ERROR Programming failed due to a hardware error. This error is valid
- for a Phase of EfiPciHostBridgeSetResources.
- @retval EFI_INVALID_PARAMETER Invalid phase parameter
- @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources.
- This error is valid for a Phase of EfiPciHostBridgeAllocateResources if the
- previously submitted resource requests cannot be fulfilled or
- were only partially fulfilled.
- @retval EFI_SUCCESS The notification was accepted without any errors.
-
-**/
-EFI_STATUS
-EFIAPI
-NotifyPhase(
- IN EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL *This,
- IN EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PHASE Phase
- )
-{
- PCI_HOST_BRIDGE_INSTANCE *HostBridgeInstance;
- EFI_STATUS ReturnStatus;
-
- HostBridgeInstance = INSTANCE_FROM_RESOURCE_ALLOCATION_THIS (This);
- ReturnStatus = EFI_SUCCESS;
-
- switch (Phase) {
-
- case EfiPciHostBridgeBeginEnumeration:
- PCIE_DEBUG("Case EfiPciHostBridgeBeginEnumeration\n");
- if (HostBridgeInstance->CanRestarted) {
- NotifyBeginEnumeration(HostBridgeInstance);
- } else {
- //
- // Can not restart
- //
- return EFI_NOT_READY;
- }
- break;
-
- case EfiPciHostBridgeEndEnumeration:
- PCIE_DEBUG("Case EfiPciHostBridgeEndEnumeration\n");
- break;
-
- case EfiPciHostBridgeBeginBusAllocation:
- PCIE_DEBUG("Case EfiPciHostBridgeBeginBusAllocation\n");
- //
- // No specific action is required here, can perform any chipset specific programing
- //
-
- HostBridgeInstance->CanRestarted = FALSE;
- break;
-
- case EfiPciHostBridgeEndBusAllocation:
- PCIE_DEBUG("Case EfiPciHostBridgeEndBusAllocation\n");
- //
- // No specific action is required here, can perform any chipset specific programing
- //
- break;
-
- case EfiPciHostBridgeBeginResourceAllocation:
- PCIE_DEBUG("Case EfiPciHostBridgeBeginResourceAllocation\n");
- //
- // No specific action is required here, can perform any chipset specific programing
- //
- break;
-
- case EfiPciHostBridgeAllocateResources:
- PCIE_DEBUG("Case EfiPciHostBridgeAllocateResources\n");
-
- if (HostBridgeInstance->ResourceSubmited) {
- //
- // Take care of the resource dependencies between the root bridges
- //
- ReturnStatus = NotifyAllocateResources(HostBridgeInstance);
- } else {
- return EFI_NOT_READY;
- }
- //break;
-
- case EfiPciHostBridgeSetResources:
- PCIE_DEBUG("Case EfiPciHostBridgeSetResources\n");
- break;
-
- case EfiPciHostBridgeFreeResources:
- PCIE_DEBUG("Case EfiPciHostBridgeFreeResources\n");
-
- ReturnStatus = NotifyFreeResources(HostBridgeInstance);
- break;
-
- case EfiPciHostBridgeEndResourceAllocation:
- PCIE_DEBUG("Case EfiPciHostBridgeEndResourceAllocation\n");
- HostBridgeInstance->CanRestarted = FALSE;
- break;
-
- default:
- return EFI_INVALID_PARAMETER;
- }
-
- return ReturnStatus;
-}
-
-/**
- Return the device handle of the next PCI root bridge that is associated with this Host Bridge.
-
- This function is called multiple times to retrieve the device handles of all the PCI root bridges that
- are associated with this PCI host bridge. Each PCI host bridge is associated with one or more PCI
- root bridges. On each call, the handle that was returned by the previous call is passed into the
- interface, and on output the interface returns the device handle of the next PCI root bridge. The
- caller can use the handle to obtain the instance of the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL
- for that root bridge. When there are no more PCI root bridges to report, the interface returns
- EFI_NOT_FOUND. A PCI enumerator must enumerate the PCI root bridges in the order that they
- are returned by this function.
- For D945 implementation, there is only one root bridge in PCI host bridge.
-
- @param[in] This The instance pointer of EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL
- @param[in, out] RootBridgeHandle Returns the device handle of the next PCI root bridge.
-
- @retval EFI_SUCCESS If parameter RootBridgeHandle = NULL, then return the first Rootbridge handle of the
- specific Host bridge and return EFI_SUCCESS.
- @retval EFI_NOT_FOUND Can not find the any more root bridge in specific host bridge.
- @retval EFI_INVALID_PARAMETER RootBridgeHandle is not an EFI_HANDLE that was
- returned on a previous call to GetNextRootBridge().
-**/
-EFI_STATUS
-EFIAPI
-GetNextRootBridge(
- IN EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL *This,
- IN OUT EFI_HANDLE *RootBridgeHandle
- )
-{
- BOOLEAN NoRootBridge;
- LIST_ENTRY *List;
- PCI_HOST_BRIDGE_INSTANCE *HostBridgeInstance;
- PCI_ROOT_BRIDGE_INSTANCE *RootBridgeInstance;
-
- NoRootBridge = TRUE;
- HostBridgeInstance = INSTANCE_FROM_RESOURCE_ALLOCATION_THIS (This);
- List = HostBridgeInstance->Head.ForwardLink;
-
-
- while (List != &HostBridgeInstance->Head) {
- NoRootBridge = FALSE;
- RootBridgeInstance = DRIVER_INSTANCE_FROM_LIST_ENTRY (List);
- if (*RootBridgeHandle == NULL) {
- //
- // Return the first Root Bridge Handle of the Host Bridge
- //
- *RootBridgeHandle = RootBridgeInstance->Handle;
- return EFI_SUCCESS;
- } else {
- if (*RootBridgeHandle == RootBridgeInstance->Handle) {
- //
- // Get next if have
- //
- List = List->ForwardLink;
- if (List!=&HostBridgeInstance->Head) {
- RootBridgeInstance = DRIVER_INSTANCE_FROM_LIST_ENTRY (List);
- *RootBridgeHandle = RootBridgeInstance->Handle;
- return EFI_SUCCESS;
- } else {
- return EFI_NOT_FOUND;
- }
- }
- }
-
- List = List->ForwardLink;
- } //end while
-
- if (NoRootBridge) {
- return EFI_NOT_FOUND;
- } else {
- return EFI_INVALID_PARAMETER;
- }
-}
-
-/**
- Returns the allocation attributes of a PCI root bridge.
-
- The function returns the allocation attributes of a specific PCI root bridge. The attributes can vary
- from one PCI root bridge to another. These attributes are different from the decode-related
- attributes that are returned by the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL.GetAttributes() member function. The
- RootBridgeHandle parameter is used to specify the instance of the PCI root bridge. The device
- handles of all the root bridges that are associated with this host bridge must be obtained by calling
- GetNextRootBridge(). The attributes are static in the sense that they do not change during or
- after the enumeration process. The hardware may provide mechanisms to change the attributes on
- the fly, but such changes must be completed before EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL is
- installed. The permitted values of EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_ATTRIBUTES are defined in
- "Related Definitions" below. The caller uses these attributes to combine multiple resource requests.
- For example, if the flag EFI_PCI_HOST_BRIDGE_COMBINE_MEM_PMEM is set, the PCI bus enumerator needs to
- include requests for the prefetchable memory in the nonprefetchable memory pool and not request any
- prefetchable memory.
- Attribute Description
- ------------------------------------ ----------------------------------------------------------------------
- EFI_PCI_HOST_BRIDGE_COMBINE_MEM_PMEM If this bit is set, then the PCI root bridge does not support separate
- windows for nonprefetchable and prefetchable memory. A PCI bus
- driver needs to include requests for prefetchable memory in the
- nonprefetchable memory pool.
-
- EFI_PCI_HOST_BRIDGE_MEM64_DECODE If this bit is set, then the PCI root bridge supports 64-bit memory
- windows. If this bit is not set, the PCI bus driver needs to include
- requests for a 64-bit memory address in the corresponding 32-bit
- memory pool.
-
- @param[in] This The instance pointer of EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL
- @param[in] RootBridgeHandle The device handle of the PCI root bridge in which the caller is interested. Type
- EFI_HANDLE is defined in InstallProtocolInterface() in the UEFI 2.0 Specification.
- @param[out] Attributes The pointer to attribte of root bridge, it is output parameter
-
- @retval EFI_INVALID_PARAMETER Attribute pointer is NULL
- @retval EFI_INVALID_PARAMETER RootBridgehandle is invalid.
- @retval EFI_SUCCESS Success to get attribute of interested root bridge.
-
-**/
-EFI_STATUS
-EFIAPI
-GetAttributes(
- IN EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL *This,
- IN EFI_HANDLE RootBridgeHandle,
- OUT UINT64 *Attributes
- )
-{
- LIST_ENTRY *List;
- PCI_HOST_BRIDGE_INSTANCE *HostBridgeInstance;
- PCI_ROOT_BRIDGE_INSTANCE *RootBridgeInstance;
-
- if (Attributes == NULL) {
- return EFI_INVALID_PARAMETER;
- }
-
- HostBridgeInstance = INSTANCE_FROM_RESOURCE_ALLOCATION_THIS (This);
- List = HostBridgeInstance->Head.ForwardLink;
-
- while (List != &HostBridgeInstance->Head) {
- RootBridgeInstance = DRIVER_INSTANCE_FROM_LIST_ENTRY (List);
- if (RootBridgeHandle == RootBridgeInstance->Handle) {
- *Attributes = RootBridgeInstance->RootBridgeAttrib;
- return EFI_SUCCESS;
- }
-
- List = List->ForwardLink;
- }
-
- //
- // RootBridgeHandle is not an EFI_HANDLE
- // that was returned on a previous call to GetNextRootBridge()
- //
- return EFI_INVALID_PARAMETER;
-}
-
-/**
- Sets up the specified PCI root bridge for the bus enumeration process.
-
- This member function sets up the root bridge for bus enumeration and returns the PCI bus range
- over which the search should be performed in ACPI 2.0 resource descriptor format.
-
- @param[in] This The EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_ PROTOCOL instance.
- @param[in] RootBridgeHandle The PCI Root Bridge to be set up.
- @param[out] Configuration Pointer to the pointer to the PCI bus resource descriptor.
-
- @retval EFI_INVALID_PARAMETER Invalid Root bridge's handle
- @retval EFI_OUT_OF_RESOURCES Fail to allocate ACPI resource descriptor tag.
- @retval EFI_SUCCESS Sucess to allocate ACPI resource descriptor.
-
-**/
-EFI_STATUS
-EFIAPI
-StartBusEnumeration(
- IN EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL *This,
- IN EFI_HANDLE RootBridgeHandle,
- OUT VOID **Configuration
- )
-{
- LIST_ENTRY *List;
- PCI_HOST_BRIDGE_INSTANCE *HostBridgeInstance;
- PCI_ROOT_BRIDGE_INSTANCE *RootBridgeInstance;
- VOID *Buffer;
- UINT8 *Temp;
- UINT64 BusStart;
- UINT64 BusEnd;
-
- HostBridgeInstance = INSTANCE_FROM_RESOURCE_ALLOCATION_THIS (This);
- List = HostBridgeInstance->Head.ForwardLink;
-
- while (List != &HostBridgeInstance->Head) {
- RootBridgeInstance = DRIVER_INSTANCE_FROM_LIST_ENTRY (List);
- if (RootBridgeHandle == RootBridgeInstance->Handle) {
- //
- // Set up the Root Bridge for Bus Enumeration
- //
- BusStart = RootBridgeInstance->BusBase;
- BusEnd = RootBridgeInstance->BusLimit;
- //
- // Program the Hardware(if needed) if error return EFI_DEVICE_ERROR
- //
-
- Buffer = AllocatePool (sizeof(EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR) + sizeof(EFI_ACPI_END_TAG_DESCRIPTOR));
- if (Buffer == NULL) {
- return EFI_OUT_OF_RESOURCES;
- }
-
- Temp = (UINT8 *)Buffer;
-
- ((EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR *)Temp)->Desc = 0x8A;
- ((EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR *)Temp)->Len = 0x2B;
- ((EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR *)Temp)->ResType = 2;
- ((EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR *)Temp)->GenFlag = 0;
- ((EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR *)Temp)->SpecificFlag = 0;
- ((EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR *)Temp)->AddrSpaceGranularity = 0;
- ((EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR *)Temp)->AddrRangeMin = BusStart;
- ((EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR *)Temp)->AddrRangeMax = 0;
- ((EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR *)Temp)->AddrTranslationOffset = 0;
- ((EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR *)Temp)->AddrLen = BusEnd - BusStart + 1;
-
- Temp = Temp + sizeof(EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR);
- ((EFI_ACPI_END_TAG_DESCRIPTOR *)Temp)->Desc = 0x79;
- ((EFI_ACPI_END_TAG_DESCRIPTOR *)Temp)->Checksum = 0x0;
-
- *Configuration = Buffer;
- return EFI_SUCCESS;
- }
- List = List->ForwardLink;
- }
-
- return EFI_INVALID_PARAMETER;
-}
-
-/**
- Programs the PCI root bridge hardware so that it decodes the specified PCI bus range.
-
- This member function programs the specified PCI root bridge to decode the bus range that is
- specified by the input parameter Configuration.
- The bus range information is specified in terms of the ACPI 2.0 resource descriptor format.
-
- @param[in] This The EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_ PROTOCOL instance
- @param[in] RootBridgeHandle The PCI Root Bridge whose bus range is to be programmed
- @param[in] Configuration The pointer to the PCI bus resource descriptor
-
- @retval EFI_INVALID_PARAMETER RootBridgeHandle is not a valid root bridge handle.
- @retval EFI_INVALID_PARAMETER Configuration is NULL.
- @retval EFI_INVALID_PARAMETER Configuration does not point to a valid ACPI 2.0 resource descriptor.
- @retval EFI_INVALID_PARAMETER Configuration does not include a valid ACPI 2.0 bus resource descriptor.
- @retval EFI_INVALID_PARAMETER Configuration includes valid ACPI 2.0 resource descriptors other than
- bus descriptors.
- @retval EFI_INVALID_PARAMETER Configuration contains one or more invalid ACPI resource descriptors.
- @retval EFI_INVALID_PARAMETER "Address Range Minimum" is invalid for this root bridge.
- @retval EFI_INVALID_PARAMETER "Address Range Length" is invalid for this root bridge.
- @retval EFI_DEVICE_ERROR Programming failed due to a hardware error.
- @retval EFI_SUCCESS The bus range for the PCI root bridge was programmed.
-
-**/
-EFI_STATUS
-EFIAPI
-SetBusNumbers(
- IN EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL *This,
- IN EFI_HANDLE RootBridgeHandle,
- IN VOID *Configuration
- )
-{
- LIST_ENTRY *List;
- PCI_HOST_BRIDGE_INSTANCE *HostBridgeInstance;
- PCI_ROOT_BRIDGE_INSTANCE *RootBridgeInstance;
- UINT8 *Ptr;
- UINTN BusStart;
- UINTN BusEnd;
- UINTN BusLen;
-
- if (Configuration == NULL) {
- return EFI_INVALID_PARAMETER;
- }
-
- Ptr = Configuration;
-
- //
- // Check the Configuration is valid
- //
- if(*Ptr != ACPI_ADDRESS_SPACE_DESCRIPTOR) {
- return EFI_INVALID_PARAMETER;
- }
-
- if (((EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR *)Ptr)->ResType != 2) {
- return EFI_INVALID_PARAMETER;
- }
-
- Ptr += sizeof(EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR);
- if (*Ptr != ACPI_END_TAG_DESCRIPTOR) {
- return EFI_INVALID_PARAMETER;
- }
-
- HostBridgeInstance = INSTANCE_FROM_RESOURCE_ALLOCATION_THIS (This);
- List = HostBridgeInstance->Head.ForwardLink;
-
- Ptr = Configuration;
-
- while (List != &HostBridgeInstance->Head) {
- RootBridgeInstance = DRIVER_INSTANCE_FROM_LIST_ENTRY (List);
- if (RootBridgeHandle == RootBridgeInstance->Handle) {
- BusStart = (UINTN)((EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR *)Ptr)->AddrRangeMin;
- BusLen = (UINTN)((EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR *)Ptr)->AddrLen;
- BusEnd = BusStart + BusLen - 1;
-
- if (BusStart > BusEnd) {
- return EFI_INVALID_PARAMETER;
- }
-
- if ((BusStart < RootBridgeInstance->BusBase) || (BusEnd > RootBridgeInstance->BusLimit)) {
- return EFI_INVALID_PARAMETER;
- }
-
- //
- // Update the Bus Range
- //
- RootBridgeInstance->ResAllocNode[TypeBus].Base = BusStart;
- RootBridgeInstance->ResAllocNode[TypeBus].Length = BusLen;
- RootBridgeInstance->ResAllocNode[TypeBus].Status = ResAllocated;
-
- //
- // Program the Root Bridge Hardware
- //
-
- return EFI_SUCCESS;
- }
-
- List = List->ForwardLink;
- }
-
- return EFI_INVALID_PARAMETER;
-}
-
-VOID
-EFIAPI
-SubmitGetResourceType(
- IN EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR *Ptr,
- OUT UINT64* Index
-)
-{
- switch (Ptr->ResType) {
- case 0:
- if (Ptr->AddrSpaceGranularity == 32) {
- if (Ptr->SpecificFlag == 0x06)
- *Index = TypePMem32;
- else
- *Index = TypeMem32;
- }
-
- if (Ptr->AddrSpaceGranularity == 64) {
- if (Ptr->SpecificFlag == 0x06)
- *Index = TypePMem64;
- else
- *Index = TypeMem64;
- }
- break;
-
- case 1:
- *Index = TypeIo;
- break;
-
- default:
- break;
- };
-
-}
-
-/**
- Submits the I/O and memory resource requirements for the specified PCI root bridge.
-
- This function is used to submit all the I/O and memory resources that are required by the specified
- PCI root bridge. The input parameter Configuration is used to specify the following:
- - The various types of resources that are required
- - The associated lengths in terms of ACPI 2.0 resource descriptor format
-
- @param[in] This Pointer to the EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL instance.
- @param[in] RootBridgeHandle The PCI root bridge whose I/O and memory resource requirements are being submitted.
- @param[in] Configuration The pointer to the PCI I/O and PCI memory resource descriptor.
-
- @retval EFI_SUCCESS The I/O and memory resource requests for a PCI root bridge were accepted.
- @retval EFI_INVALID_PARAMETER RootBridgeHandle is not a valid root bridge handle.
- @retval EFI_INVALID_PARAMETER Configuration is NULL.
- @retval EFI_INVALID_PARAMETER Configuration does not point to a valid ACPI 2.0 resource descriptor.
- @retval EFI_INVALID_PARAMETER Configuration includes requests for one or more resource types that are
- not supported by this PCI root bridge. This error will happen if the caller
- did not combine resources according to Attributes that were returned by
- GetAllocAttributes().
- @retval EFI_INVALID_PARAMETER Address Range Maximum" is invalid.
- @retval EFI_INVALID_PARAMETER "Address Range Length" is invalid for this PCI root bridge.
- @retval EFI_INVALID_PARAMETER "Address Space Granularity" is invalid for this PCI root bridge.
-
-**/
-EFI_STATUS
-EFIAPI
-SubmitResources(
- IN EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL *This,
- IN EFI_HANDLE RootBridgeHandle,
- IN VOID *Configuration
- )
-{
- LIST_ENTRY *List;
- PCI_HOST_BRIDGE_INSTANCE *HostBridgeInstance;
- PCI_ROOT_BRIDGE_INSTANCE *RootBridgeInstance;
- UINT8 *Temp;
- EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR *Ptr;
- UINT64 AddrLen;
- UINT64 Alignment;
- UINTN Index;
-
- PCIE_DEBUG("In SubmitResources\n");
- //
- // Check the input parameter: Configuration
- //
- if (Configuration == NULL)
- return EFI_INVALID_PARAMETER;
-
- HostBridgeInstance = INSTANCE_FROM_RESOURCE_ALLOCATION_THIS (This);
- List = HostBridgeInstance->Head.ForwardLink;
-
- Temp = (UINT8 *)Configuration;
- while ( *Temp == 0x8A)
- Temp += sizeof (EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR) ;
-
- if (*Temp != 0x79)
- return EFI_INVALID_PARAMETER;
-
- Temp = (UINT8 *)Configuration;
- while (List != &HostBridgeInstance->Head) {
- RootBridgeInstance = DRIVER_INSTANCE_FROM_LIST_ENTRY (List);
- if (RootBridgeHandle == RootBridgeInstance->Handle) {
- while ( *Temp == 0x8A) {
- Ptr = (EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR *) Temp ;
- PCIE_DEBUG("Ptr->ResType:%d\n", Ptr->ResType);
- PCIE_DEBUG("Ptr->Addrlen:%llx\n", Ptr->AddrLen);
- PCIE_DEBUG("Ptr->AddrRangeMax:%llx\n", Ptr->AddrRangeMax);
- PCIE_DEBUG("Ptr->AddrRangeMin:%llx\n", Ptr->AddrRangeMin);
- PCIE_DEBUG("Ptr->SpecificFlag:%llx\n", Ptr->SpecificFlag);
- PCIE_DEBUG("Ptr->AddrSpaceGranularity:%d\n", Ptr->AddrSpaceGranularity);
- PCIE_DEBUG("RootBridgeInstance->RootBridgeAttrib:%llx\n", RootBridgeInstance->RootBridgeAttrib);
- //
- // Check address range alignment
- //
- if (Ptr->AddrRangeMax != (GetPowerOfTwo64 (Ptr->AddrRangeMax + 1) - 1)) {
- return EFI_INVALID_PARAMETER;
- }
- Index = 0;
- SubmitGetResourceType(Ptr,&Index);
- AddrLen = (UINTN) Ptr->AddrLen;
- Alignment = (UINTN) Ptr->AddrRangeMax;
- RootBridgeInstance->ResAllocNode[Index].Length = AddrLen;
- RootBridgeInstance->ResAllocNode[Index].Alignment = Alignment;
- RootBridgeInstance->ResAllocNode[Index].Status = ResRequested;
- HostBridgeInstance->ResourceSubmited = TRUE;
-
- Temp += sizeof (EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR) ;
- }
-
- return EFI_SUCCESS;
- }
-
- List = List->ForwardLink;
- }
- return EFI_INVALID_PARAMETER;
-}
-
-/**
- Returns the proposed resource settings for the specified PCI root bridge.
-
- This member function returns the proposed resource settings for the specified PCI root bridge. The
- proposed resource settings are prepared when NotifyPhase() is called with a Phase of
- EfiPciHostBridgeAllocateResources. The output parameter Configuration
- specifies the following:
- - The various types of resources, excluding bus resources, that are allocated
- - The associated lengths in terms of ACPI 2.0 resource descriptor format
-
- @param[in] This Pointer to the EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL instance.
- @param[in] RootBridgeHandle The PCI root bridge handle. Type EFI_HANDLE is defined in InstallProtocolInterface() in the UEFI 2.0 Specification.
- @param[out] Configuration The pointer to the pointer to the PCI I/O and memory resource descriptor.
-
- @retval EFI_SUCCESS The requested parameters were returned.
- @retval EFI_INVALID_PARAMETER RootBridgeHandle is not a valid root bridge handle.
- @retval EFI_DEVICE_ERROR Programming failed due to a hardware error.
- @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources.
-
-**/
-EFI_STATUS
-EFIAPI
-SetResource(
- PCI_ROOT_BRIDGE_INSTANCE *RootBridgeInstance,
- VOID *Buffer
-
-)
-{
- UINTN Index;
- UINT8 *Temp;
- EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR *Ptr;
- UINT64 ResStatus;
-
- Temp = Buffer;
-
- for (Index = 0; Index < TypeBus; Index ++)
- {
- if (RootBridgeInstance->ResAllocNode[Index].Status != ResNone) {
- Ptr = (EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR *) Temp ;
- ResStatus = RootBridgeInstance->ResAllocNode[Index].Status;
-
- switch (Index) {
-
- case TypeIo:
- //
- // Io
- //
- Ptr->Desc = 0x8A;
- Ptr->Len = 0x2B;
- Ptr->ResType = 1;
- Ptr->GenFlag = 0;
- Ptr->SpecificFlag = 0;
- /* PCIE Device Iobar address should be based on IoBase */
- Ptr->AddrRangeMin = RootBridgeInstance->IoBase;
- Ptr->AddrRangeMax = 0;
- Ptr->AddrTranslationOffset = \
- (ResStatus == ResAllocated) ? EFI_RESOURCE_SATISFIED : EFI_RESOURCE_LESS;
- Ptr->AddrLen = RootBridgeInstance->ResAllocNode[Index].Length;
- break;
-
- case TypeMem32:
- //
- // Memory 32
- //
- Ptr->Desc = 0x8A;
- Ptr->Len = 0x2B;
- Ptr->ResType = 0;
- Ptr->GenFlag = 0;
- Ptr->SpecificFlag = 0;
- Ptr->AddrSpaceGranularity = 32;
- /* PCIE device Bar should be based on PciRegionBase */
- if (RootBridgeInstance->PciRegionBase > MAX_UINT32) {
- DEBUG((DEBUG_ERROR, "PCIE Res(TypeMem32) unsupported.\n"));
- return EFI_UNSUPPORTED;
- }
- Ptr->AddrRangeMin = RootBridgeInstance->ResAllocNode[Index].Base - RootBridgeInstance->MemBase +
- RootBridgeInstance->PciRegionBase;
- Ptr->AddrRangeMax = 0;
- Ptr->AddrTranslationOffset = \
- (ResStatus == ResAllocated) ? EFI_RESOURCE_SATISFIED : EFI_RESOURCE_LESS;
- Ptr->AddrLen = RootBridgeInstance->ResAllocNode[Index].Length;
- break;
-
- case TypePMem32:
- //
- // Prefetch memory 32
- //
- Ptr->Desc = 0x8A;
- Ptr->Len = 0x2B;
- Ptr->ResType = 0;
- Ptr->GenFlag = 0;
- Ptr->SpecificFlag = 6;
- Ptr->AddrSpaceGranularity = 32;
- /* PCIE device Bar should be based on PciRegionBase */
- if (RootBridgeInstance->PciRegionBase > MAX_UINT32) {
- DEBUG((DEBUG_ERROR, "PCIE Res(TypePMem32) unsupported.\n"));
- return EFI_UNSUPPORTED;
- }
- Ptr->AddrRangeMin = RootBridgeInstance->ResAllocNode[Index].Base - RootBridgeInstance->MemBase +
- RootBridgeInstance->PciRegionBase;
- Ptr->AddrRangeMax = 0;
- Ptr->AddrTranslationOffset = \
- (ResStatus == ResAllocated) ? EFI_RESOURCE_SATISFIED : EFI_RESOURCE_LESS;
- Ptr->AddrLen = RootBridgeInstance->ResAllocNode[Index].Length;
- break;
-
- case TypeMem64:
- //
- // Memory 64
- //
- Ptr->Desc = 0x8A;
- Ptr->Len = 0x2B;
- Ptr->ResType = 0;
- Ptr->GenFlag = 0;
- Ptr->SpecificFlag = 0;
- Ptr->AddrSpaceGranularity = 64;
- /* PCIE device Bar should be based on PciRegionBase */
- Ptr->AddrRangeMin = RootBridgeInstance->ResAllocNode[Index].Base - RootBridgeInstance->MemBase +
- RootBridgeInstance->PciRegionBase;
- Ptr->AddrRangeMax = 0;
- Ptr->AddrTranslationOffset = \
- (ResStatus == ResAllocated) ? EFI_RESOURCE_SATISFIED : EFI_RESOURCE_LESS;
- Ptr->AddrLen = RootBridgeInstance->ResAllocNode[Index].Length;
- break;
-
- case TypePMem64:
- //
- // Prefetch memory 64
- //
- Ptr->Desc = 0x8A;
- Ptr->Len = 0x2B;
- Ptr->ResType = 0;
- Ptr->GenFlag = 0;
- Ptr->SpecificFlag = 6;
- Ptr->AddrSpaceGranularity = 64;
- /* PCIE device Bar should be based on PciRegionBase */
- Ptr->AddrRangeMin = RootBridgeInstance->ResAllocNode[Index].Base - RootBridgeInstance->MemBase +
- RootBridgeInstance->PciRegionBase;
- Ptr->AddrRangeMax = 0;
- Ptr->AddrTranslationOffset = \
- (ResStatus == ResAllocated) ? EFI_RESOURCE_SATISFIED : EFI_RESOURCE_LESS;
- Ptr->AddrLen = RootBridgeInstance->ResAllocNode[Index].Length;
- break;
- };
- PCIE_DEBUG("Ptr->ResType:%d\n", Ptr->ResType);
- PCIE_DEBUG("Ptr->Addrlen:%llx\n", Ptr->AddrLen);
- PCIE_DEBUG("Ptr->AddrRangeMax:%llx\n", Ptr->AddrRangeMax);
- PCIE_DEBUG("Ptr->AddrRangeMin:%llx\n", Ptr->AddrRangeMin);
- PCIE_DEBUG("Ptr->SpecificFlag:%llx\n", Ptr->SpecificFlag);
- PCIE_DEBUG("Ptr->AddrTranslationOffset:%d\n", Ptr->AddrTranslationOffset);
- PCIE_DEBUG("Ptr->AddrSpaceGranularity:%d\n", Ptr->AddrSpaceGranularity);
-
- Temp += sizeof (EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR);
- }
- }
- ((EFI_ACPI_END_TAG_DESCRIPTOR *)Temp)->Desc = 0x79;
- ((EFI_ACPI_END_TAG_DESCRIPTOR *)Temp)->Checksum = 0x0;
-
- return EFI_SUCCESS;
-}
-/**
- Returns the proposed resource settings for the specified PCI root bridge.
-
- This member function returns the proposed resource settings for the specified PCI root bridge. The
- proposed resource settings are prepared when NotifyPhase() is called with a Phase of
- EfiPciHostBridgeAllocateResources. The output parameter Configuration
- specifies the following:
- - The various types of resources, excluding bus resources, that are allocated
- - The associated lengths in terms of ACPI 2.0 resource descriptor format
-
- @param[in] This Pointer to the EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL instance.
- @param[in] RootBridgeHandle The PCI root bridge handle. Type EFI_HANDLE is defined in InstallProtocolInterface() in the UEFI 2.0 Specification.
- @param[out] Configuration The pointer to the pointer to the PCI I/O and memory resource descriptor.
-
- @retval EFI_SUCCESS The requested parameters were returned.
- @retval EFI_INVALID_PARAMETER RootBridgeHandle is not a valid root bridge handle.
- @retval EFI_DEVICE_ERROR Programming failed due to a hardware error.
- @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources.
-
-**/
-EFI_STATUS
-EFIAPI
-GetProposedResources(
- IN EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL *This,
- IN EFI_HANDLE RootBridgeHandle,
- OUT VOID **Configuration
- )
-{
- LIST_ENTRY *List;
- PCI_HOST_BRIDGE_INSTANCE *HostBridgeInstance;
- PCI_ROOT_BRIDGE_INSTANCE *RootBridgeInstance;
- UINTN Index;
- UINTN Number;
- VOID *Buffer;
-
- Buffer = NULL;
- Number = 0;
-
- PCIE_DEBUG("In GetProposedResources\n");
- //
- // Get the Host Bridge Instance from the resource allocation protocol
- //
- HostBridgeInstance = INSTANCE_FROM_RESOURCE_ALLOCATION_THIS (This);
- List = HostBridgeInstance->Head.ForwardLink;
-
- //
- // Enumerate the root bridges in this host bridge
- //
- while (List != &HostBridgeInstance->Head) {
- RootBridgeInstance = DRIVER_INSTANCE_FROM_LIST_ENTRY (List);
- if (RootBridgeHandle == RootBridgeInstance->Handle) {
- for (Index = 0; Index < TypeBus; Index ++) {
- if (RootBridgeInstance->ResAllocNode[Index].Status != ResNone) {
- Number ++;
- }
- }
-
- Buffer = AllocateZeroPool (Number * sizeof(EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR) + sizeof(EFI_ACPI_END_TAG_DESCRIPTOR));
- if (Buffer == NULL) {
- return EFI_OUT_OF_RESOURCES;
- }
-
- (VOID)SetResource(RootBridgeInstance,Buffer);
-
- *Configuration = Buffer;
-
- return EFI_SUCCESS;
- }
-
- List = List->ForwardLink;
- }
-
- return EFI_INVALID_PARAMETER;
-}
-
-/**
- Provides the hooks from the PCI bus driver to every PCI controller (device/function) at various
- stages of the PCI enumeration process that allow the host bridge driver to preinitialize individual
- PCI controllers before enumeration.
-
- This function is called during the PCI enumeration process. No specific action is expected from this
- member function. It allows the host bridge driver to preinitialize individual PCI controllers before
- enumeration.
-
- @param This Pointer to the EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL instance.
- @param RootBridgeHandle The associated PCI root bridge handle. Type EFI_HANDLE is defined in
- InstallProtocolInterface() in the UEFI 2.0 Specification.
- @param PciAddress The address of the PCI device on the PCI bus. This address can be passed to the
- EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL member functions to access the PCI
- configuration space of the device. See Table 12-1 in the UEFI 2.0 Specification for
- the definition of EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_PCI_ADDRESS.
- @param Phase The phase of the PCI device enumeration.
-
- @retval EFI_SUCCESS The requested parameters were returned.
- @retval EFI_INVALID_PARAMETER RootBridgeHandle is not a valid root bridge handle.
- @retval EFI_INVALID_PARAMETER Phase is not a valid phase that is defined in
- EFI_PCI_CONTROLLER_RESOURCE_ALLOCATION_PHASE.
- @retval EFI_DEVICE_ERROR Programming failed due to a hardware error. The PCI enumerator should
- not enumerate this device, including its child devices if it is a PCI-to-PCI
- bridge.
-
-**/
-EFI_STATUS
-EFIAPI
-PreprocessController (
- IN EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL *This,
- IN EFI_HANDLE RootBridgeHandle,
- IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_PCI_ADDRESS PciAddress,
- IN EFI_PCI_CONTROLLER_RESOURCE_ALLOCATION_PHASE Phase
- )
-{
- PCI_HOST_BRIDGE_INSTANCE *HostBridgeInstance;
- PCI_ROOT_BRIDGE_INSTANCE *RootBridgeInstance;
- LIST_ENTRY *List;
-
- HostBridgeInstance = INSTANCE_FROM_RESOURCE_ALLOCATION_THIS (This);
- List = HostBridgeInstance->Head.ForwardLink;
-
- //
- // Enumerate the root bridges in this host bridge
- //
- while (List != &HostBridgeInstance->Head) {
- RootBridgeInstance = DRIVER_INSTANCE_FROM_LIST_ENTRY (List);
- if (RootBridgeHandle == RootBridgeInstance->Handle) {
- break;
- }
- List = List->ForwardLink;
- }
- if (List == &HostBridgeInstance->Head) {
- return EFI_INVALID_PARAMETER;
- }
-
- if ((UINT32)Phase > EfiPciBeforeResourceCollection) {
- return EFI_INVALID_PARAMETER;
- }
-
- return EFI_SUCCESS;
-}
diff --git a/Silicon/Hisilicon/Drivers/PciHostBridgeDxe/PciHostBridge.h b/Silicon/Hisilicon/Drivers/PciHostBridgeDxe/PciHostBridge.h
deleted file mode 100644
index 435385491a..0000000000
--- a/Silicon/Hisilicon/Drivers/PciHostBridgeDxe/PciHostBridge.h
+++ /dev/null
@@ -1,520 +0,0 @@
-/**
- * Copyright (c) 2014, AppliedMicro Corp. All rights reserved.
- * Copyright (c) 2016, Hisilicon Limited. All rights reserved.
- * Copyright (c) 2016, Linaro Limited. All rights reserved.
- *
- * This program and the accompanying materials
- * are licensed and made available under the terms and conditions of the BSD License
- * which accompanies this distribution. The full text of the license may be found at
- * http://opensource.org/licenses/bsd-license.php
- *
- * THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
- * WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
- *
- **/
-
-#ifndef _PCI_HOST_BRIDGE_H_
-#define _PCI_HOST_BRIDGE_H_
-
-#include <PiDxe.h>
-
-#include <IndustryStandard/Pci.h>
-#include <IndustryStandard/Acpi.h>
-
-#include <Protocol/PciHostBridgeResourceAllocation.h>
-#include <Protocol/PciRootBridgeIo.h>
-#include <Protocol/Metronome.h>
-#include <Protocol/DevicePath.h>
-#include <Protocol/PciIo.h>
-#include <Protocol/CpuIo2.h>
-
-
-#include <Library/BaseLib.h>
-#include <Library/DebugLib.h>
-#include <Library/BaseMemoryLib.h>
-#include <Library/MemoryAllocationLib.h>
-#include <Library/UefiLib.h>
-#include <Library/UefiBootServicesTableLib.h>
-#include <Library/DxeServicesTableLib.h>
-#include <Library/DevicePathLib.h>
-#include <Library/IoLib.h>
-#include <Library/PciLib.h>
-#include <Library/PcdLib.h>
-#include <Library/PlatformPciLib.h>
-
-// Enable below statments to enable PCIE debug
-//#define PCIE_DEBUG_ENABLE
-//#define PCIE_VDEBUG_ENABLE
-//#define PCIE_CDEBUG_ENABLE
-
-#ifdef PCIE_CDEBUG_ENABLE
-# define PCIE_CSR_DEBUG(arg...) DEBUG((EFI_D_VERBOSE,## arg))
-#else
-# define PCIE_CSR_DEBUG(arg...)
-#endif
-
-#ifdef PCIE_VDEBUG_ENABLE
-# define PCIE_VDEBUG(arg...) DEBUG((EFI_D_VERBOSE,## arg))
-#else
-# define PCIE_VDEBUG(arg...)
-#endif
-
-#ifdef PCIE_DEBUG_ENABLE
-# define PCIE_DEBUG(arg...) DEBUG((EFI_D_VERBOSE,## arg))
-#else
-# define PCIE_DEBUG(arg...)
-#endif
-#define PCIE_WARN(arg...) DEBUG((EFI_D_WARN,## arg))
-#define PCIE_ERR(arg...) DEBUG((EFI_D_ERROR,## arg))
-#define PCIE_INFO(arg...) DEBUG((EFI_D_INFO,## arg))
-
-#define MAX_PCI_DEVICE_NUMBER 31
-#define MAX_PCI_FUNCTION_NUMBER 7
-#define MAX_PCI_REG_ADDRESS 0xFFFF
-
-typedef enum {
- IoOperation,
- MemOperation,
- PciOperation
-} OPERATION_TYPE;
-
-#define PCI_HOST_BRIDGE_SIGNATURE SIGNATURE_32('e', 'h', 's', 't')
-typedef struct {
- UINTN Signature;
- EFI_HANDLE HostBridgeHandle;
- UINTN RootBridgeNumber;
- LIST_ENTRY Head;
- BOOLEAN ResourceSubmited;
- BOOLEAN CanRestarted;
- EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL ResAlloc;
-} PCI_HOST_BRIDGE_INSTANCE;
-
-#define INSTANCE_FROM_RESOURCE_ALLOCATION_THIS(a) \
- CR(a, PCI_HOST_BRIDGE_INSTANCE, ResAlloc, PCI_HOST_BRIDGE_SIGNATURE)
-
-//
-// HostBridge Resource Allocation interface
-//
-
-/**
- These are the notifications from the PCI bus driver that it is about to enter a certain
- phase of the PCI enumeration process.
-
- This member function can be used to notify the host bridge driver to perform specific actions,
- including any chipset-specific initialization, so that the chipset is ready to enter the next phase.
- Eight notification points are defined at this time. See belows:
- EfiPciHostBridgeBeginEnumeration Resets the host bridge PCI apertures and internal data
- structures. The PCI enumerator should issue this notification
- before starting a fresh enumeration process. Enumeration cannot
- be restarted after sending any other notification such as
- EfiPciHostBridgeBeginBusAllocation.
- EfiPciHostBridgeBeginBusAllocation The bus allocation phase is about to begin. No specific action is
- required here. This notification can be used to perform any
- chipset-specific programming.
- EfiPciHostBridgeEndBusAllocation The bus allocation and bus programming phase is complete. No
- specific action is required here. This notification can be used to
- perform any chipset-specific programming.
- EfiPciHostBridgeBeginResourceAllocation
- The resource allocation phase is about to begin. No specific
- action is required here. This notification can be used to perform
- any chipset-specific programming.
- EfiPciHostBridgeAllocateResources Allocates resources per previously submitted requests for all the PCI
- root bridges. These resource settings are returned on the next call to
- GetProposedResources(). Before calling NotifyPhase() with a Phase of
- EfiPciHostBridgeAllocateResource, the PCI bus enumerator is responsible
- for gathering I/O and memory requests for
- all the PCI root bridges and submitting these requests using
- SubmitResources(). This function pads the resource amount
- to suit the root bridge hardware, takes care of dependencies between
- the PCI root bridges, and calls the Global Coherency Domain (GCD)
- with the allocation request. In the case of padding, the allocated range
- could be bigger than what was requested.
- EfiPciHostBridgeSetResources Programs the host bridge hardware to decode previously allocated
- resources (proposed resources) for all the PCI root bridges. After the
- hardware is programmed, reassigning resources will not be supported.
- The bus settings are not affected.
- EfiPciHostBridgeFreeResources Deallocates resources that were previously allocated for all the PCI
- root bridges and resets the I/O and memory apertures to their initial
- state. The bus settings are not affected. If the request to allocate
- resources fails, the PCI enumerator can use this notification to
- deallocate previous resources, adjust the requests, and retry
- allocation.
- EfiPciHostBridgeEndResourceAllocation The resource allocation phase is completed. No specific action is
- required here. This notification can be used to perform any chipsetspecific
- programming.
-
- @param[in] This The instance pointer of EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL
- @param[in] Phase The phase during enumeration
-
- @retval EFI_NOT_READY This phase cannot be entered at this time. For example, this error
- is valid for a Phase of EfiPciHostBridgeAllocateResources if
- SubmitResources() has not been called for one or more
- PCI root bridges before this call
- @retval EFI_DEVICE_ERROR Programming failed due to a hardware error. This error is valid
- for a Phase of EfiPciHostBridgeSetResources.
- @retval EFI_INVALID_PARAMETER Invalid phase parameter
- @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources.
- This error is valid for a Phase of EfiPciHostBridgeAllocateResources if the
- previously submitted resource requests cannot be fulfilled or
- were only partially fulfilled.
- @retval EFI_SUCCESS The notification was accepted without any errors.
-
-**/
-EFI_STATUS
-EFIAPI
-NotifyPhase(
- IN EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL *This,
- IN EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PHASE Phase
- );
-
-/**
- Return the device handle of the next PCI root bridge that is associated with this Host Bridge.
-
- This function is called multiple times to retrieve the device handles of all the PCI root bridges that
- are associated with this PCI host bridge. Each PCI host bridge is associated with one or more PCI
- root bridges. On each call, the handle that was returned by the previous call is passed into the
- interface, and on output the interface returns the device handle of the next PCI root bridge. The
- caller can use the handle to obtain the instance of the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL
- for that root bridge. When there are no more PCI root bridges to report, the interface returns
- EFI_NOT_FOUND. A PCI enumerator must enumerate the PCI root bridges in the order that they
- are returned by this function.
- For D945 implementation, there is only one root bridge in PCI host bridge.
-
- @param[in] This The instance pointer of EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL
- @param[in, out] RootBridgeHandle Returns the device handle of the next PCI root bridge.
-
- @retval EFI_SUCCESS If parameter RootBridgeHandle = NULL, then return the first Rootbridge handle of the
- specific Host bridge and return EFI_SUCCESS.
- @retval EFI_NOT_FOUND Can not find the any more root bridge in specific host bridge.
- @retval EFI_INVALID_PARAMETER RootBridgeHandle is not an EFI_HANDLE that was
- returned on a previous call to GetNextRootBridge().
-**/
-EFI_STATUS
-EFIAPI
-GetNextRootBridge(
- IN EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL *This,
- IN OUT EFI_HANDLE *RootBridgeHandle
- );
-
-/**
- Returns the allocation attributes of a PCI root bridge.
-
- The function returns the allocation attributes of a specific PCI root bridge. The attributes can vary
- from one PCI root bridge to another. These attributes are different from the decode-related
- attributes that are returned by the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL.GetAttributes() member function. The
- RootBridgeHandle parameter is used to specify the instance of the PCI root bridge. The device
- handles of all the root bridges that are associated with this host bridge must be obtained by calling
- GetNextRootBridge(). The attributes are static in the sense that they do not change during or
- after the enumeration process. The hardware may provide mechanisms to change the attributes on
- the fly, but such changes must be completed before EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL is
- installed. The permitted values of EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_ATTRIBUTES are defined in
- "Related Definitions" below. The caller uses these attributes to combine multiple resource requests.
- For example, if the flag EFI_PCI_HOST_BRIDGE_COMBINE_MEM_PMEM is set, the PCI bus enumerator needs to
- include requests for the prefetchable memory in the nonprefetchable memory pool and not request any
- prefetchable memory.
- Attribute Description
- ------------------------------------ ----------------------------------------------------------------------
- EFI_PCI_HOST_BRIDGE_COMBINE_MEM_PMEM If this bit is set, then the PCI root bridge does not support separate
- windows for nonprefetchable and prefetchable memory. A PCI bus
- driver needs to include requests for prefetchable memory in the
- nonprefetchable memory pool.
-
- EFI_PCI_HOST_BRIDGE_MEM64_DECODE If this bit is set, then the PCI root bridge supports 64-bit memory
- windows. If this bit is not set, the PCI bus driver needs to include
- requests for a 64-bit memory address in the corresponding 32-bit
- memory pool.
-
- @param[in] This The instance pointer of EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL
- @param[in] RootBridgeHandle The device handle of the PCI root bridge in which the caller is interested. Type
- EFI_HANDLE is defined in InstallProtocolInterface() in the UEFI 2.0 Specification.
- @param[out] Attributes The pointer to attribte of root bridge, it is output parameter
-
- @retval EFI_INVALID_PARAMETER Attribute pointer is NULL
- @retval EFI_INVALID_PARAMETER RootBridgehandle is invalid.
- @retval EFI_SUCCESS Success to get attribute of interested root bridge.
-
-**/
-EFI_STATUS
-EFIAPI
-GetAttributes(
- IN EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL *This,
- IN EFI_HANDLE RootBridgeHandle,
- OUT UINT64 *Attributes
- );
-
-/**
- Sets up the specified PCI root bridge for the bus enumeration process.
-
- This member function sets up the root bridge for bus enumeration and returns the PCI bus range
- over which the search should be performed in ACPI 2.0 resource descriptor format.
-
- @param[in] This The EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_ PROTOCOL instance.
- @param[in] RootBridgeHandle The PCI Root Bridge to be set up.
- @param[out] Configuration Pointer to the pointer to the PCI bus resource descriptor.
-
- @retval EFI_INVALID_PARAMETER Invalid Root bridge's handle
- @retval EFI_OUT_OF_RESOURCES Fail to allocate ACPI resource descriptor tag.
- @retval EFI_SUCCESS Sucess to allocate ACPI resource descriptor.
-
-**/
-EFI_STATUS
-EFIAPI
-StartBusEnumeration(
- IN EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL *This,
- IN EFI_HANDLE RootBridgeHandle,
- OUT VOID **Configuration
- );
-
-/**
- Programs the PCI root bridge hardware so that it decodes the specified PCI bus range.
-
- This member function programs the specified PCI root bridge to decode the bus range that is
- specified by the input parameter Configuration.
- The bus range information is specified in terms of the ACPI 2.0 resource descriptor format.
-
- @param[in] This The EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_ PROTOCOL instance
- @param[in] RootBridgeHandle The PCI Root Bridge whose bus range is to be programmed
- @param[in] Configuration The pointer to the PCI bus resource descriptor
-
- @retval EFI_INVALID_PARAMETER RootBridgeHandle is not a valid root bridge handle.
- @retval EFI_INVALID_PARAMETER Configuration is NULL.
- @retval EFI_INVALID_PARAMETER Configuration does not point to a valid ACPI 2.0 resource descriptor.
- @retval EFI_INVALID_PARAMETER Configuration does not include a valid ACPI 2.0 bus resource descriptor.
- @retval EFI_INVALID_PARAMETER Configuration includes valid ACPI 2.0 resource descriptors other than
- bus descriptors.
- @retval EFI_INVALID_PARAMETER Configuration contains one or more invalid ACPI resource descriptors.
- @retval EFI_INVALID_PARAMETER "Address Range Minimum" is invalid for this root bridge.
- @retval EFI_INVALID_PARAMETER "Address Range Length" is invalid for this root bridge.
- @retval EFI_DEVICE_ERROR Programming failed due to a hardware error.
- @retval EFI_SUCCESS The bus range for the PCI root bridge was programmed.
-
-**/
-EFI_STATUS
-EFIAPI
-SetBusNumbers(
- IN EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL *This,
- IN EFI_HANDLE RootBridgeHandle,
- IN VOID *Configuration
- );
-
-/**
- Submits the I/O and memory resource requirements for the specified PCI root bridge.
-
- This function is used to submit all the I/O and memory resources that are required by the specified
- PCI root bridge. The input parameter Configuration is used to specify the following:
- - The various types of resources that are required
- - The associated lengths in terms of ACPI 2.0 resource descriptor format
-
- @param[in] This Pointer to the EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL instance.
- @param[in] RootBridgeHandle The PCI root bridge whose I/O and memory resource requirements are being submitted.
- @param[in] Configuration The pointer to the PCI I/O and PCI memory resource descriptor.
-
- @retval EFI_SUCCESS The I/O and memory resource requests for a PCI root bridge were accepted.
- @retval EFI_INVALID_PARAMETER RootBridgeHandle is not a valid root bridge handle.
- @retval EFI_INVALID_PARAMETER Configuration is NULL.
- @retval EFI_INVALID_PARAMETER Configuration does not point to a valid ACPI 2.0 resource descriptor.
- @retval EFI_INVALID_PARAMETER Configuration includes requests for one or more resource types that are
- not supported by this PCI root bridge. This error will happen if the caller
- did not combine resources according to Attributes that were returned by
- GetAllocAttributes().
- @retval EFI_INVALID_PARAMETER Address Range Maximum" is invalid.
- @retval EFI_INVALID_PARAMETER "Address Range Length" is invalid for this PCI root bridge.
- @retval EFI_INVALID_PARAMETER "Address Space Granularity" is invalid for this PCI root bridge.
-
-**/
-EFI_STATUS
-EFIAPI
-SubmitResources(
- IN EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL *This,
- IN EFI_HANDLE RootBridgeHandle,
- IN VOID *Configuration
- );
-
-/**
- Returns the proposed resource settings for the specified PCI root bridge.
-
- This member function returns the proposed resource settings for the specified PCI root bridge. The
- proposed resource settings are prepared when NotifyPhase() is called with a Phase of
- EfiPciHostBridgeAllocateResources. The output parameter Configuration
- specifies the following:
- - The various types of resources, excluding bus resources, that are allocated
- - The associated lengths in terms of ACPI 2.0 resource descriptor format
-
- @param[in] This Pointer to the EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL instance.
- @param[in] RootBridgeHandle The PCI root bridge handle. Type EFI_HANDLE is defined in InstallProtocolInterface() in the UEFI 2.0 Specification.
- @param[out] Configuration The pointer to the pointer to the PCI I/O and memory resource descriptor.
-
- @retval EFI_SUCCESS The requested parameters were returned.
- @retval EFI_INVALID_PARAMETER RootBridgeHandle is not a valid root bridge handle.
- @retval EFI_DEVICE_ERROR Programming failed due to a hardware error.
- @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources.
-
-**/
-EFI_STATUS
-EFIAPI
-GetProposedResources(
- IN EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL *This,
- IN EFI_HANDLE RootBridgeHandle,
- OUT VOID **Configuration
- );
-
-/**
- Provides the hooks from the PCI bus driver to every PCI controller (device/function) at various
- stages of the PCI enumeration process that allow the host bridge driver to preinitialize individual
- PCI controllers before enumeration.
-
- This function is called during the PCI enumeration process. No specific action is expected from this
- member function. It allows the host bridge driver to preinitialize individual PCI controllers before
- enumeration.
-
- @param This Pointer to the EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL instance.
- @param RootBridgeHandle The associated PCI root bridge handle. Type EFI_HANDLE is defined in
- InstallProtocolInterface() in the UEFI 2.0 Specification.
- @param PciAddress The address of the PCI device on the PCI bus. This address can be passed to the
- EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL member functions to access the PCI
- configuration space of the device. See Table 12-1 in the UEFI 2.0 Specification for
- the definition of EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_PCI_ADDRESS.
- @param Phase The phase of the PCI device enumeration.
-
- @retval EFI_SUCCESS The requested parameters were returned.
- @retval EFI_INVALID_PARAMETER RootBridgeHandle is not a valid root bridge handle.
- @retval EFI_INVALID_PARAMETER Phase is not a valid phase that is defined in
- EFI_PCI_CONTROLLER_RESOURCE_ALLOCATION_PHASE.
- @retval EFI_DEVICE_ERROR Programming failed due to a hardware error. The PCI enumerator should
- not enumerate this device, including its child devices if it is a PCI-to-PCI
- bridge.
-
-**/
-EFI_STATUS
-EFIAPI
-PreprocessController (
- IN EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL *This,
- IN EFI_HANDLE RootBridgeHandle,
- IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_PCI_ADDRESS PciAddress,
- IN EFI_PCI_CONTROLLER_RESOURCE_ALLOCATION_PHASE Phase
- );
-
-
-//
-// Define resource status constant
-//
-#define EFI_RESOURCE_NONEXISTENT 0xFFFFFFFFFFFFFFFFULL
-#define EFI_RESOURCE_LESS 0xFFFFFFFFFFFFFFFEULL
-
-//
-// Driver Instance Data Prototypes
-//
-
-typedef struct {
- EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_OPERATION Operation;
- UINTN NumberOfBytes;
- UINTN NumberOfPages;
- EFI_PHYSICAL_ADDRESS HostAddress;
- EFI_PHYSICAL_ADDRESS MappedHostAddress;
-} MAP_INFO;
-
-typedef struct {
- ACPI_HID_DEVICE_PATH AcpiDevicePath;
- EFI_DEVICE_PATH_PROTOCOL EndDevicePath;
-} EFI_PCI_ROOT_BRIDGE_DEVICE_PATH;
-
-typedef enum {
- TypeIo = 0,
- TypeMem32,
- TypePMem32,
- TypeMem64,
- TypePMem64,
- TypeBus,
- TypeMax
-} PCI_RESOURCE_TYPE;
-
-typedef enum {
- ResNone = 0,
- ResSubmitted,
- ResRequested,
- ResAllocated,
- ResStatusMax
-} RES_STATUS;
-
-typedef struct {
- PCI_RESOURCE_TYPE Type;
- UINT64 Base;
- UINT64 Length;
- UINT64 Alignment;
- RES_STATUS Status;
-} PCI_RES_NODE;
-
-#define PCI_ROOT_BRIDGE_SIGNATURE SIGNATURE_32('e', '2', 'p', 'b')
-
-typedef struct {
- UINT32 Signature;
- LIST_ENTRY Link;
- EFI_HANDLE Handle;
- UINT64 RootBridgeAttrib;
- UINT64 Attributes;
- UINT64 Supports;
-
- //
- // Specific for this memory controller: Bus, I/O, Mem
- //
- PCI_RES_NODE ResAllocNode[6];
-
- //
- // Addressing for Memory and I/O and Bus arrange
- //
- UINT64 BusBase;
- UINT64 MemBase;
- UINT64 IoBase;
- UINT64 BusLimit;
- UINT64 MemLimit;
- UINT64 IoLimit;
- UINT64 RbPciBar;
- UINT64 Ecam;
-
- UINTN PciAddress;
- UINTN PciData;
- UINTN Port;
- UINT32 SocType;
- UINT64 CpuMemRegionBase;
- UINT64 CpuIoRegionBase;
- UINT64 PciRegionBase;
- UINT64 PciRegionLimit;
-
- EFI_DEVICE_PATH_PROTOCOL *DevicePath;
- EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL Io;
-
-} PCI_ROOT_BRIDGE_INSTANCE;
-
-
-//
-// Driver Instance Data Macros
-//
-#define DRIVER_INSTANCE_FROM_PCI_ROOT_BRIDGE_IO_THIS(a) \
- CR(a, PCI_ROOT_BRIDGE_INSTANCE, Io, PCI_ROOT_BRIDGE_SIGNATURE)
-
-
-#define DRIVER_INSTANCE_FROM_LIST_ENTRY(a) \
- CR(a, PCI_ROOT_BRIDGE_INSTANCE, Link, PCI_ROOT_BRIDGE_SIGNATURE)
-
-/**
-
- Construct the Pci Root Bridge Io protocol
-
- @param Protocol Point to protocol instance
- @param HostBridgeHandle Handle of host bridge
- @param Attri Attribute of host bridge
- @param ResAppeture ResourceAppeture for host bridge
-
- @retval EFI_SUCCESS Success to initialize the Pci Root Bridge.
-
-**/
-EFI_STATUS
-RootBridgeConstructor (
- IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *Protocol,
- IN EFI_HANDLE HostBridgeHandle,
- IN UINT64 Attri,
- IN PCI_ROOT_BRIDGE_RESOURCE_APPETURE *ResAppeture,
- IN UINT32 Seg
- );
-
-#endif
diff --git a/Silicon/Hisilicon/Drivers/PciHostBridgeDxe/PciHostBridgeDxe.inf b/Silicon/Hisilicon/Drivers/PciHostBridgeDxe/PciHostBridgeDxe.inf
deleted file mode 100644
index 7f5e1751ec..0000000000
--- a/Silicon/Hisilicon/Drivers/PciHostBridgeDxe/PciHostBridgeDxe.inf
+++ /dev/null
@@ -1,74 +0,0 @@
-## @file
-#
-# Component description file PCI Host Bridge driver.
-# Copyright (c) 2014, AppliedMicro Corp. All rights reserved.
-# Copyright (c) 2016, Hisilicon Limited. All rights reserved.
-# Copyright (c) 2016, Linaro Limited. All rights reserved.
-#
-# This program and the accompanying materials
-# are licensed and made available under the terms and conditions of the BSD License
-# which accompanies this distribution. The full text of the license may be found at
-# http://opensource.org/licenses/bsd-license.php
-#
-# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
-# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-##
-
-[Defines]
- INF_VERSION = 0x00010005
- BASE_NAME = PciHostBridge
- FILE_GUID = B0E61270-263F-11E3-8224-0800200C9A66
- MODULE_TYPE = DXE_DRIVER
- VERSION_STRING = 1.0
-
- ENTRY_POINT = InitializePciHostBridge
-
-[Packages]
- MdePkg/MdePkg.dec
- ArmPkg/ArmPkg.dec
- ArmPlatformPkg/ArmPlatformPkg.dec
- EmbeddedPkg/EmbeddedPkg.dec
- Silicon/Hisilicon/HisiPkg.dec
-
-[LibraryClasses]
- UefiDriverEntryPoint
- UefiBootServicesTableLib
- MemoryAllocationLib
- DxeServicesTableLib
- CacheMaintenanceLib
- DmaLib
- BaseMemoryLib
- BaseLib
- DebugLib
- TimerLib
- ArmLib
- DevicePathLib
- PcdLib
- OemMiscLib
-
-[Sources]
- PciHostBridge.c
- PciRootBridgeIo.c
- PciHostBridge.h
-
-[Protocols]
- gEfiPciHostBridgeResourceAllocationProtocolGuid
- gEfiPciRootBridgeIoProtocolGuid
- gEfiMetronomeArchProtocolGuid
- gEfiDevicePathProtocolGuid
- gEmbeddedGpioProtocolGuid
-
-[depex]
- gEfiMetronomeArchProtocolGuid
-
-[FeaturePcd]
-
-[Pcd]
-
-[FixedPcd]
- gHisiTokenSpaceGuid.PcdPcieRootBridgeMask
- gHisiTokenSpaceGuid.PcdPcieRootBridgeMask2P
- gHisiTokenSpaceGuid.Pcdsoctype
-
-[Guids]
- gEfiEventExitBootServicesGuid ## PRODUCES ## Event
diff --git a/Silicon/Hisilicon/Drivers/PciHostBridgeDxe/PciRootBridgeIo.c b/Silicon/Hisilicon/Drivers/PciHostBridgeDxe/PciRootBridgeIo.c
deleted file mode 100644
index 3c265ea433..0000000000
--- a/Silicon/Hisilicon/Drivers/PciHostBridgeDxe/PciRootBridgeIo.c
+++ /dev/null
@@ -1,2220 +0,0 @@
-/**
- * Copyright (c) 2014, AppliedMicro Corp. All rights reserved.
- * Copyright (c) 2016, Hisilicon Limited. All rights reserved.
- * Copyright (c) 2016, Linaro Limited. All rights reserved.
- *
- * This program and the accompanying materials
- * are licensed and made available under the terms and conditions of the BSD License
- * which accompanies this distribution. The full text of the license may be found at
- * http://opensource.org/licenses/bsd-license.php
- *
- * THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
- * WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
- *
- **/
-
-#include "PciHostBridge.h"
-#include <IndustryStandard/PciExpress30.h>
-#include <Library/DevicePathLib.h>
-#include <Library/DmaLib.h>
-#include <Library/PciExpressLib.h>
-#include <Regs/HisiPcieV1RegOffset.h>
-
-
-typedef struct {
- EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR SpaceDesp[TypeMax];
- EFI_ACPI_END_TAG_DESCRIPTOR EndDesp;
-} RESOURCE_CONFIGURATION;
-
-RESOURCE_CONFIGURATION Configuration = {
- {{0x8A, 0x2B, 1, 0, 0, 0, 0, 0, 0, 0},
- {0x8A, 0x2B, 0, 0, 0, 32, 0, 0, 0, 0},
- {0x8A, 0x2B, 0, 0, 6, 32, 0, 0, 0, 0},
- {0x8A, 0x2B, 0, 0, 0, 64, 0, 0, 0, 0},
- {0x8A, 0x2B, 0, 0, 6, 64, 0, 0, 0, 0},
- {0x8A, 0x2B, 2, 0, 0, 0, 0, 0, 0, 0}},
- {0x79, 0}
-};
-
-//
-// Protocol Member Function Prototypes
-//
-
-/**
- Polls an address in memory mapped I/O space until an exit condition is met, or
- a timeout occurs.
-
- This function provides a standard way to poll a PCI memory location. A PCI memory read
- operation is performed at the PCI memory address specified by Address for the width specified
- by Width. The result of this PCI memory read operation is stored in Result. This PCI memory
- read operation is repeated until either a timeout of Delay 100 ns units has expired, or (Result &
- Mask) is equal to Value.
-
- @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL.
- @param[in] Width Signifies the width of the memory operations.
- @param[in] Address The base address of the memory operations. The caller is
- responsible for aligning Address if required.
- @param[in] Mask Mask used for the polling criteria. Bytes above Width in Mask
- are ignored. The bits in the bytes below Width which are zero in
- Mask are ignored when polling the memory address.
- @param[in] Value The comparison value used for the polling exit criteria.
- @param[in] Delay The number of 100 ns units to poll. Note that timer available may
- be of poorer granularity.
- @param[out] Result Pointer to the last value read from the memory location.
-
- @retval EFI_SUCCESS The last data returned from the access matched the poll exit criteria.
- @retval EFI_INVALID_PARAMETER Width is invalid.
- @retval EFI_INVALID_PARAMETER Result is NULL.
- @retval EFI_TIMEOUT Delay expired before a match occurred.
- @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources.
-
-**/
-EFI_STATUS
-EFIAPI
-RootBridgeIoPollMem (
- IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This,
- IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH Width,
- IN UINT64 Address,
- IN UINT64 Mask,
- IN UINT64 Value,
- IN UINT64 Delay,
- OUT UINT64 *Result
- );
-
-/**
- Reads from the I/O space of a PCI Root Bridge. Returns when either the polling exit criteria is
- satisfied or after a defined duration.
-
- This function provides a standard way to poll a PCI I/O location. A PCI I/O read operation is
- performed at the PCI I/O address specified by Address for the width specified by Width.
- The result of this PCI I/O read operation is stored in Result. This PCI I/O read operation is
- repeated until either a timeout of Delay 100 ns units has expired, or (Result & Mask) is equal
- to Value.
-
- @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL.
- @param[in] Width Signifies the width of the I/O operations.
- @param[in] Address The base address of the I/O operations. The caller is responsible
- for aligning Address if required.
- @param[in] Mask Mask used for the polling criteria. Bytes above Width in Mask
- are ignored. The bits in the bytes below Width which are zero in
- Mask are ignored when polling the I/O address.
- @param[in] Value The comparison value used for the polling exit criteria.
- @param[in] Delay The number of 100 ns units to poll. Note that timer available may
- be of poorer granularity.
- @param[out] Result Pointer to the last value read from the memory location.
-
- @retval EFI_SUCCESS The last data returned from the access matched the poll exit criteria.
- @retval EFI_INVALID_PARAMETER Width is invalid.
- @retval EFI_INVALID_PARAMETER Result is NULL.
- @retval EFI_TIMEOUT Delay expired before a match occurred.
- @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources.
-
-**/
-EFI_STATUS
-EFIAPI
-RootBridgeIoPollIo (
- IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This,
- IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH Width,
- IN UINT64 Address,
- IN UINT64 Mask,
- IN UINT64 Value,
- IN UINT64 Delay,
- OUT UINT64 *Result
- );
-
-/**
- Enables a PCI driver to access PCI controller registers in the PCI root bridge memory space.
-
- The Mem.Read(), and Mem.Write() functions enable a driver to access PCI controller
- registers in the PCI root bridge memory space.
- The memory operations are carried out exactly as requested. The caller is responsible for satisfying
- any alignment and memory width restrictions that a PCI Root Bridge on a platform might require.
-
- @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL.
- @param[in] Width Signifies the width of the memory operation.
- @param[in] Address The base address of the memory operation. The caller is
- responsible for aligning the Address if required.
- @param[in] Count The number of memory operations to perform. Bytes moved is
- Width size * Count, starting at Address.
- @param[out] Buffer For read operations, the destination buffer to store the results. For
- write operations, the source buffer to write data from.
-
- @retval EFI_SUCCESS The data was read from or written to the PCI root bridge.
- @retval EFI_INVALID_PARAMETER Width is invalid for this PCI root bridge.
- @retval EFI_INVALID_PARAMETER Buffer is NULL.
- @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources.
-
-**/
-EFI_STATUS
-EFIAPI
-RootBridgeIoMemRead (
- IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This,
- IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH Width,
- IN UINT64 Address,
- IN UINTN Count,
- OUT VOID *Buffer
- );
-
-/**
- Enables a PCI driver to access PCI controller registers in the PCI root bridge memory space.
-
- The Mem.Read(), and Mem.Write() functions enable a driver to access PCI controller
- registers in the PCI root bridge memory space.
- The memory operations are carried out exactly as requested. The caller is responsible for satisfying
- any alignment and memory width restrictions that a PCI Root Bridge on a platform might require.
-
- @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL.
- @param[in] Width Signifies the width of the memory operation.
- @param[in] Address The base address of the memory operation. The caller is
- responsible for aligning the Address if required.
- @param[in] Count The number of memory operations to perform. Bytes moved is
- Width size * Count, starting at Address.
- @param[in] Buffer For read operations, the destination buffer to store the results. For
- write operations, the source buffer to write data from.
-
- @retval EFI_SUCCESS The data was read from or written to the PCI root bridge.
- @retval EFI_INVALID_PARAMETER Width is invalid for this PCI root bridge.
- @retval EFI_INVALID_PARAMETER Buffer is NULL.
- @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources.
-**/
-EFI_STATUS
-EFIAPI
-RootBridgeIoMemWrite (
- IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This,
- IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH Width,
- IN UINT64 Address,
- IN UINTN Count,
- IN VOID *Buffer
- );
-
-/**
- Enables a PCI driver to access PCI controller registers in the PCI root bridge I/O space.
-
- @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL.
- @param[in] Width Signifies the width of the memory operations.
- @param[in] UserAddress The base address of the I/O operation. The caller is responsible for
- aligning the Address if required.
- @param[in] Count The number of I/O operations to perform. Bytes moved is Width
- size * Count, starting at Address.
- @param[out] UserBuffer For read operations, the destination buffer to store the results. For
- write operations, the source buffer to write data from.
-
- @retval EFI_SUCCESS The data was read from or written to the PCI root bridge.
- @retval EFI_INVALID_PARAMETER Width is invalid for this PCI root bridge.
- @retval EFI_INVALID_PARAMETER Buffer is NULL.
- @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources.
-
-**/
-EFI_STATUS
-EFIAPI
-RootBridgeIoIoRead (
- IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This,
- IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH Width,
- IN UINT64 UserAddress,
- IN UINTN Count,
- OUT VOID *UserBuffer
- );
-
-/**
- Enables a PCI driver to access PCI controller registers in the PCI root bridge I/O space.
-
- @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL.
- @param[in] Width Signifies the width of the memory operations.
- @param[in] UserAddress The base address of the I/O operation. The caller is responsible for
- aligning the Address if required.
- @param[in] Count The number of I/O operations to perform. Bytes moved is Width
- size * Count, starting at Address.
- @param[in] UserBuffer For read operations, the destination buffer to store the results. For
- write operations, the source buffer to write data from.
-
- @retval EFI_SUCCESS The data was read from or written to the PCI root bridge.
- @retval EFI_INVALID_PARAMETER Width is invalid for this PCI root bridge.
- @retval EFI_INVALID_PARAMETER Buffer is NULL.
- @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources.
-
-**/
-EFI_STATUS
-EFIAPI
-RootBridgeIoIoWrite (
- IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This,
- IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH Width,
- IN UINT64 UserAddress,
- IN UINTN Count,
- IN VOID *UserBuffer
- );
-
-/**
- Enables a PCI driver to copy one region of PCI root bridge memory space to another region of PCI
- root bridge memory space.
-
- The CopyMem() function enables a PCI driver to copy one region of PCI root bridge memory
- space to another region of PCI root bridge memory space. This is especially useful for video scroll
- operation on a memory mapped video buffer.
- The memory operations are carried out exactly as requested. The caller is responsible for satisfying
- any alignment and memory width restrictions that a PCI root bridge on a platform might require.
-
- @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL instance.
- @param[in] Width Signifies the width of the memory operations.
- @param[in] DestAddress The destination address of the memory operation. The caller is
- responsible for aligning the DestAddress if required.
- @param[in] SrcAddress The source address of the memory operation. The caller is
- responsible for aligning the SrcAddress if required.
- @param[in] Count The number of memory operations to perform. Bytes moved is
- Width size * Count, starting at DestAddress and SrcAddress.
-
- @retval EFI_SUCCESS The data was copied from one memory region to another memory region.
- @retval EFI_INVALID_PARAMETER Width is invalid for this PCI root bridge.
- @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources.
-
-**/
-EFI_STATUS
-EFIAPI
-RootBridgeIoCopyMem (
- IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This,
- IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH Width,
- IN UINT64 DestAddress,
- IN UINT64 SrcAddress,
- IN UINTN Count
- );
-
-/**
- Enables a PCI driver to access PCI controller registers in a PCI root bridge's configuration space.
-
- The Pci.Read() and Pci.Write() functions enable a driver to access PCI configuration
- registers for a PCI controller.
- The PCI Configuration operations are carried out exactly as requested. The caller is responsible for
- any alignment and PCI configuration width issues that a PCI Root Bridge on a platform might
- require.
-
- @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL.
- @param[in] Width Signifies the width of the memory operations.
- @param[in] Address The address within the PCI configuration space for the PCI controller.
- @param[in] Count The number of PCI configuration operations to perform. Bytes
- moved is Width size * Count, starting at Address.
- @param[out] Buffer For read operations, the destination buffer to store the results. For
- write operations, the source buffer to write data from.
-
- @retval EFI_SUCCESS The data was read from or written to the PCI root bridge.
- @retval EFI_INVALID_PARAMETER Width is invalid for this PCI root bridge.
- @retval EFI_INVALID_PARAMETER Buffer is NULL.
- @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources.
-
-**/
-EFI_STATUS
-EFIAPI
-RootBridgeIoPciRead (
- IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This,
- IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH Width,
- IN UINT64 Address,
- IN UINTN Count,
- OUT VOID *Buffer
- );
-
-/**
- Enables a PCI driver to access PCI controller registers in a PCI root bridge's configuration space.
-
- The Pci.Read() and Pci.Write() functions enable a driver to access PCI configuration
- registers for a PCI controller.
- The PCI Configuration operations are carried out exactly as requested. The caller is responsible for
- any alignment and PCI configuration width issues that a PCI Root Bridge on a platform might
- require.
-
- @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL.
- @param[in] Width Signifies the width of the memory operations.
- @param[in] Address The address within the PCI configuration space for the PCI controller.
- @param[in] Count The number of PCI configuration operations to perform. Bytes
- moved is Width size * Count, starting at Address.
- @param[in] Buffer For read operations, the destination buffer to store the results. For
- write operations, the source buffer to write data from.
-
- @retval EFI_SUCCESS The data was read from or written to the PCI root bridge.
- @retval EFI_INVALID_PARAMETER Width is invalid for this PCI root bridge.
- @retval EFI_INVALID_PARAMETER Buffer is NULL.
- @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources.
-
-**/
-EFI_STATUS
-EFIAPI
-RootBridgeIoPciWrite (
- IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This,
- IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH Width,
- IN UINT64 Address,
- IN UINTN Count,
- IN VOID *Buffer
- );
-
-/**
- Provides the PCI controller-specific addresses required to access system memory from a
- DMA bus master.
-
- The Map() function provides the PCI controller specific addresses needed to access system
- memory. This function is used to map system memory for PCI bus master DMA accesses.
-
- @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL.
- @param[in] Operation Indicates if the bus master is going to read or write to system memory.
- @param[in] HostAddress The system memory address to map to the PCI controller.
- @param[in, out] NumberOfBytes On input the number of bytes to map. On output the number of bytes that were mapped.
- @param[out] DeviceAddress The resulting map address for the bus master PCI controller to use
- to access the system memory's HostAddress.
- @param[out] Mapping The value to pass to Unmap() when the bus master DMA operation is complete.
-
- @retval EFI_SUCCESS The range was mapped for the returned NumberOfBytes.
- @retval EFI_INVALID_PARAMETER Operation is invalid.
- @retval EFI_INVALID_PARAMETER HostAddress is NULL.
- @retval EFI_INVALID_PARAMETER NumberOfBytes is NULL.
- @retval EFI_INVALID_PARAMETER DeviceAddress is NULL.
- @retval EFI_INVALID_PARAMETER Mapping is NULL.
- @retval EFI_UNSUPPORTED The HostAddress cannot be mapped as a common buffer.
- @retval EFI_DEVICE_ERROR The system hardware could not map the requested address.
- @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources.
-
-**/
-EFI_STATUS
-EFIAPI
-RootBridgeIoMap (
- IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This,
- IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_OPERATION Operation,
- IN VOID *HostAddress,
- IN OUT UINTN *NumberOfBytes,
- OUT EFI_PHYSICAL_ADDRESS *DeviceAddress,
- OUT VOID **Mapping
- );
-
-/**
- Completes the Map() operation and releases any corresponding resources.
-
- The Unmap() function completes the Map() operation and releases any corresponding resources.
- If the operation was an EfiPciOperationBusMasterWrite or
- EfiPciOperationBusMasterWrite64, the data is committed to the target system memory.
- Any resources used for the mapping are freed.
-
- @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL.
- @param[in] Mapping The mapping value returned from Map().
-
- @retval EFI_SUCCESS The range was unmapped.
- @retval EFI_INVALID_PARAMETER Mapping is not a value that was returned by Map().
- @retval EFI_DEVICE_ERROR The data was not committed to the target system memory.
-
-**/
-EFI_STATUS
-EFIAPI
-RootBridgeIoUnmap (
- IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This,
- IN VOID *Mapping
- );
-
-/**
- Allocates pages that are suitable for an EfiPciOperationBusMasterCommonBuffer or
- EfiPciOperationBusMasterCommonBuffer64 mapping.
-
- @param This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL.
- @param Type This parameter is not used and must be ignored.
- @param MemoryType The type of memory to allocate, EfiBootServicesData or EfiRuntimeServicesData.
- @param Pages The number of pages to allocate.
- @param HostAddress A pointer to store the base system memory address of the allocated range.
- @param Attributes The requested bit mask of attributes for the allocated range. Only
- the attributes EFI_PCI_ATTRIBUTE_MEMORY_WRITE_COMBINE, EFI_PCI_ATTRIBUTE_MEMORY_CACHED,
- and EFI_PCI_ATTRIBUTE_DUAL_ADDRESS_CYCLE may be used with this function.
-
- @retval EFI_SUCCESS The requested memory pages were allocated.
- @retval EFI_INVALID_PARAMETER MemoryType is invalid.
- @retval EFI_INVALID_PARAMETER HostAddress is NULL.
- @retval EFI_UNSUPPORTED Attributes is unsupported. The only legal attribute bits are
- MEMORY_WRITE_COMBINE, MEMORY_CACHED, and DUAL_ADDRESS_CYCLE.
- @retval EFI_OUT_OF_RESOURCES The memory pages could not be allocated.
-
-**/
-EFI_STATUS
-EFIAPI
-RootBridgeIoAllocateBuffer (
- IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This,
- IN EFI_ALLOCATE_TYPE Type,
- IN EFI_MEMORY_TYPE MemoryType,
- IN UINTN Pages,
- OUT VOID **HostAddress,
- IN UINT64 Attributes
- );
-
-/**
- Frees memory that was allocated with AllocateBuffer().
-
- The FreeBuffer() function frees memory that was allocated with AllocateBuffer().
-
- @param This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL.
- @param Pages The number of pages to free.
- @param HostAddress The base system memory address of the allocated range.
-
- @retval EFI_SUCCESS The requested memory pages were freed.
- @retval EFI_INVALID_PARAMETER The memory range specified by HostAddress and Pages
- was not allocated with AllocateBuffer().
-
-**/
-EFI_STATUS
-EFIAPI
-RootBridgeIoFreeBuffer (
- IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This,
- IN UINTN Pages,
- OUT VOID *HostAddress
- );
-
-/**
- Flushes all PCI posted write transactions from a PCI host bridge to system memory.
-
- The Flush() function flushes any PCI posted write transactions from a PCI host bridge to system
- memory. Posted write transactions are generated by PCI bus masters when they perform write
- transactions to target addresses in system memory.
- This function does not flush posted write transactions from any PCI bridges. A PCI controller
- specific action must be taken to guarantee that the posted write transactions have been flushed from
- the PCI controller and from all the PCI bridges into the PCI host bridge. This is typically done with
- a PCI read transaction from the PCI controller prior to calling Flush().
-
- @param This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL.
-
- @retval EFI_SUCCESS The PCI posted write transactions were flushed from the PCI host
- bridge to system memory.
- @retval EFI_DEVICE_ERROR The PCI posted write transactions were not flushed from the PCI
- host bridge due to a hardware error.
-
-**/
-EFI_STATUS
-EFIAPI
-RootBridgeIoFlush (
- IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This
- );
-
-/**
- Gets the attributes that a PCI root bridge supports setting with SetAttributes(), and the
- attributes that a PCI root bridge is currently using.
-
- The GetAttributes() function returns the mask of attributes that this PCI root bridge supports
- and the mask of attributes that the PCI root bridge is currently using.
-
- @param This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL.
- @param Supported A pointer to the mask of attributes that this PCI root bridge
- supports setting with SetAttributes().
- @param Attributes A pointer to the mask of attributes that this PCI root bridge is
- currently using.
-
- @retval EFI_SUCCESS If Supports is not NULL, then the attributes that the PCI root
- bridge supports is returned in Supports. If Attributes is
- not NULL, then the attributes that the PCI root bridge is currently
- using is returned in Attributes.
- @retval EFI_INVALID_PARAMETER Both Supports and Attributes are NULL.
-
-**/
-EFI_STATUS
-EFIAPI
-RootBridgeIoGetAttributes (
- IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This,
- OUT UINT64 *Supported,
- OUT UINT64 *Attributes
- );
-
-/**
- Sets attributes for a resource range on a PCI root bridge.
-
- The SetAttributes() function sets the attributes specified in Attributes for the PCI root
- bridge on the resource range specified by ResourceBase and ResourceLength. Since the
- granularity of setting these attributes may vary from resource type to resource type, and from
- platform to platform, the actual resource range and the one passed in by the caller may differ. As a
- result, this function may set the attributes specified by Attributes on a larger resource range
- than the caller requested. The actual range is returned in ResourceBase and
- ResourceLength. The caller is responsible for verifying that the actual range for which the
- attributes were set is acceptable.
-
- @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL.
- @param[in] Attributes The mask of attributes to set. If the attribute bit
- MEMORY_WRITE_COMBINE, MEMORY_CACHED, or
- MEMORY_DISABLE is set, then the resource range is specified by
- ResourceBase and ResourceLength. If
- MEMORY_WRITE_COMBINE, MEMORY_CACHED, and
- MEMORY_DISABLE are not set, then ResourceBase and
- ResourceLength are ignored, and may be NULL.
- @param[in, out] ResourceBase A pointer to the base address of the resource range to be modified
- by the attributes specified by Attributes.
- @param[in, out] ResourceLength A pointer to the length of the resource range to be modified by the
- attributes specified by Attributes.
-
- @retval EFI_SUCCESS The current configuration of this PCI root bridge was returned in Resources.
- @retval EFI_UNSUPPORTED The current configuration of this PCI root bridge could not be retrieved.
- @retval EFI_INVALID_PARAMETER Invalid pointer of EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL
-
-**/
-EFI_STATUS
-EFIAPI
-RootBridgeIoSetAttributes (
- IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This,
- IN UINT64 Attributes,
- IN OUT UINT64 *ResourceBase,
- IN OUT UINT64 *ResourceLength
- );
-
-/**
- Retrieves the current resource settings of this PCI root bridge in the form of a set of ACPI 2.0
- resource descriptors.
-
- There are only two resource descriptor types from the ACPI Specification that may be used to
- describe the current resources allocated to a PCI root bridge. These are the QWORD Address
- Space Descriptor (ACPI 2.0 Section 6.4.3.5.1), and the End Tag (ACPI 2.0 Section 6.4.2.8). The
- QWORD Address Space Descriptor can describe memory, I/O, and bus number ranges for dynamic
- or fixed resources. The configuration of a PCI root bridge is described with one or more QWORD
- Address Space Descriptors followed by an End Tag.
-
- @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL.
- @param[out] Resources A pointer to the ACPI 2.0 resource descriptors that describe the
- current configuration of this PCI root bridge. The storage for the
- ACPI 2.0 resource descriptors is allocated by this function. The
- caller must treat the return buffer as read-only data, and the buffer
- must not be freed by the caller.
-
- @retval EFI_SUCCESS The current configuration of this PCI root bridge was returned in Resources.
- @retval EFI_UNSUPPORTED The current configuration of this PCI root bridge could not be retrieved.
- @retval EFI_INVALID_PARAMETER Invalid pointer of EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL
-
-**/
-EFI_STATUS
-EFIAPI
-RootBridgeIoConfiguration (
- IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This,
- OUT VOID **Resources
- );
-
-//
-// Memory Controller Pci Root Bridge Io Module Variables
-//
-EFI_METRONOME_ARCH_PROTOCOL *mMetronome;
-
-//
-// Lookup table for increment values based on transfer widths
-//
-UINT8 mInStride[] = {
- 1, // EfiPciWidthUint8
- 2, // EfiPciWidthUint16
- 4, // EfiPciWidthUint32
- 8, // EfiPciWidthUint64
- 0, // EfiPciWidthFifoUint8
- 0, // EfiPciWidthFifoUint16
- 0, // EfiPciWidthFifoUint32
- 0, // EfiPciWidthFifoUint64
- 1, // EfiPciWidthFillUint8
- 2, // EfiPciWidthFillUint16
- 4, // EfiPciWidthFillUint32
- 8 // EfiPciWidthFillUint64
-};
-
-//
-// Lookup table for increment values based on transfer widths
-//
-UINT8 mOutStride[] = {
- 1, // EfiPciWidthUint8
- 2, // EfiPciWidthUint16
- 4, // EfiPciWidthUint32
- 8, // EfiPciWidthUint64
- 1, // EfiPciWidthFifoUint8
- 2, // EfiPciWidthFifoUint16
- 4, // EfiPciWidthFifoUint32
- 8, // EfiPciWidthFifoUint64
- 0, // EfiPciWidthFillUint8
- 0, // EfiPciWidthFillUint16
- 0, // EfiPciWidthFillUint32
- 0 // EfiPciWidthFillUint64
-};
-
-
-UINT64 GetPcieCfgAddress (
- UINT64 Ecam,
- UINTN Bus,
- UINTN Device,
- UINTN Function,
- UINTN Reg
- )
-{
- return Ecam + PCI_EXPRESS_LIB_ADDRESS (Bus, Device, Function, Reg);
-}
-
-
-BOOLEAN PcieIsLinkUp (UINT32 SocType, UINTN RbPciBar, UINTN Port)
-{
- UINT32 Value = 0;
-
- if (0x1610 == SocType)
- {
- Value = MmioRead32(RbPciBar + 0x131C);
- if ((Value & 0x3F) == 0x11)
- {
- return TRUE;
- }
- return FALSE;
- }
- else
- {
- Value = MmioRead32 (0xb0000000 + 0x6818 + 0x100 * Port);
- if ((Value & 0x3F) == 0x11)
- {
- return TRUE;
- }
- return FALSE;
- }
-}
-
-/**
-
- Construct the Pci Root Bridge Io protocol
-
- @param Protocol Point to protocol instance
- @param HostBridgeHandle Handle of host bridge
- @param Attri Attribute of host bridge
- @param ResAppeture ResourceAppeture for host bridge
-
- @retval EFI_SUCCESS Success to initialize the Pci Root Bridge.
-
-**/
-EFI_STATUS
-RootBridgeConstructor (
- IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *Protocol,
- IN EFI_HANDLE HostBridgeHandle,
- IN UINT64 Attri,
- IN PCI_ROOT_BRIDGE_RESOURCE_APPETURE *ResAppeture,
- IN UINT32 Seg
- )
-{
- EFI_STATUS Status;
- PCI_ROOT_BRIDGE_INSTANCE *PrivateData;
- PCI_RESOURCE_TYPE Index;
-
- PrivateData = DRIVER_INSTANCE_FROM_PCI_ROOT_BRIDGE_IO_THIS (Protocol);
-
- //
- // The host to pci bridge, the host memory and io addresses are
- // direct mapped to pci addresses, so no need translate, set bases to 0.
- //
- PrivateData->MemBase = ResAppeture->MemBase;
- PrivateData->IoBase = ResAppeture->IoBase;
- PrivateData->RbPciBar = ResAppeture->RbPciBar;
- PrivateData->MemLimit = ResAppeture->MemLimit;
- PrivateData->IoLimit = ResAppeture->IoLimit;
- PrivateData->Ecam = ResAppeture->Ecam;
- PrivateData->CpuMemRegionBase = ResAppeture->CpuMemRegionBase;
- PrivateData->CpuIoRegionBase = ResAppeture->CpuIoRegionBase;
- PrivateData->PciRegionBase = ResAppeture->PciRegionBase;
- PrivateData->PciRegionLimit = ResAppeture->PciRegionLimit;
-
- //
- // Bus Appeture for this Root Bridge (Possible Range)
- //
- PrivateData->BusBase = ResAppeture->BusBase;
- PrivateData->BusLimit = ResAppeture->BusLimit;
-
- //
- // Specific for this chipset
- //
- for (Index = TypeIo; Index < TypeMax; Index++) {
- PrivateData->ResAllocNode[Index].Type = Index;
- PrivateData->ResAllocNode[Index].Base = 0;
- PrivateData->ResAllocNode[Index].Length = 0;
- PrivateData->ResAllocNode[Index].Status = ResNone;
- }
-
- PrivateData->RootBridgeAttrib = Attri;
-
- PrivateData->Supports = EFI_PCI_ATTRIBUTE_IDE_PRIMARY_IO | EFI_PCI_ATTRIBUTE_IDE_SECONDARY_IO | \
- EFI_PCI_ATTRIBUTE_ISA_IO_16 | EFI_PCI_ATTRIBUTE_ISA_MOTHERBOARD_IO | \
- EFI_PCI_ATTRIBUTE_VGA_MEMORY | \
- EFI_PCI_ATTRIBUTE_VGA_IO_16 | EFI_PCI_ATTRIBUTE_VGA_PALETTE_IO_16 | \
- EFI_PCI_ATTRIBUTE_VALID_FOR_ALLOCATE_BUFFER;
- PrivateData->Attributes = PrivateData->Supports;
-
- Protocol->ParentHandle = HostBridgeHandle;
-
- Protocol->PollMem = RootBridgeIoPollMem;
- Protocol->PollIo = RootBridgeIoPollIo;
-
- Protocol->Mem.Read = RootBridgeIoMemRead;
- Protocol->Mem.Write = RootBridgeIoMemWrite;
-
- Protocol->Io.Read = RootBridgeIoIoRead;
- Protocol->Io.Write = RootBridgeIoIoWrite;
-
- Protocol->CopyMem = RootBridgeIoCopyMem;
-
- Protocol->Pci.Read = RootBridgeIoPciRead;
- Protocol->Pci.Write = RootBridgeIoPciWrite;
-
- Protocol->Map = RootBridgeIoMap;
- Protocol->Unmap = RootBridgeIoUnmap;
-
- Protocol->AllocateBuffer = RootBridgeIoAllocateBuffer;
- Protocol->FreeBuffer = RootBridgeIoFreeBuffer;
-
- Protocol->Flush = RootBridgeIoFlush;
-
- Protocol->GetAttributes = RootBridgeIoGetAttributes;
- Protocol->SetAttributes = RootBridgeIoSetAttributes;
-
- Protocol->Configuration = RootBridgeIoConfiguration;
-
- Protocol->SegmentNumber = Seg;
-
-
- Status = gBS->LocateProtocol (&gEfiMetronomeArchProtocolGuid, NULL, (VOID **)&mMetronome);
- if (EFI_ERROR(Status))
- {
- DEBUG((EFI_D_ERROR,"LocateProtocol MetronomeArchProtocol Error\n"));
- }
-
- return EFI_SUCCESS;
-}
-
-/**
- Check parameters for IO,MMIO,PCI read/write services of PCI Root Bridge IO.
-
- The I/O operations are carried out exactly as requested. The caller is responsible
- for satisfying any alignment and I/O width restrictions that a PI System on a
- platform might require. For example on some platforms, width requests of
- EfiCpuIoWidthUint64 do not work. Misaligned buffers, on the other hand, will
- be handled by the driver.
-
- @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL.
- @param[in] OperationType I/O operation type: IO/MMIO/PCI.
- @param[in] Width Signifies the width of the I/O or Memory operation.
- @param[in] Address The base address of the I/O operation.
- @param[in] Count The number of I/O operations to perform. The number of
- bytes moved is Width size * Count, starting at Address.
- @param[in] Buffer For read operations, the destination buffer to store the results.
- For write operations, the source buffer from which to write data.
-
- @retval EFI_SUCCESS The parameters for this request pass the checks.
- @retval EFI_INVALID_PARAMETER Width is invalid for this PI system.
- @retval EFI_INVALID_PARAMETER Buffer is NULL.
- @retval EFI_UNSUPPORTED The Buffer is not aligned for the given Width.
- @retval EFI_UNSUPPORTED The address range specified by Address, Width,
- and Count is not valid for this PI system.
-
-**/
-EFI_STATUS
-RootBridgeIoCheckParameter (
- IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This,
- IN OPERATION_TYPE OperationType,
- IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH Width,
- IN UINT64 Address,
- IN UINTN Count,
- IN VOID *Buffer
- )
-{
- PCI_ROOT_BRIDGE_INSTANCE *PrivateData;
- EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_PCI_ADDRESS *PciRbAddr;
- UINT64 MaxCount;
- UINT64 Base;
- UINT64 Limit;
-
- //
- // Check to see if Buffer is NULL
- //
- if (Buffer == NULL) {
- return EFI_INVALID_PARAMETER;
- }
-
- //
- // Check to see if Width is in the valid range
- //
- if ((UINT32)Width >= EfiPciWidthMaximum) {
- return EFI_INVALID_PARAMETER;
- }
-
- //
- // For FIFO type, the target address won't increase during the access,
- // so treat Count as 1
- //
- if (Width >= EfiPciWidthFifoUint8 && Width <= EfiPciWidthFifoUint64) {
- Count = 1;
- }
-
- //
- // Check to see if Width is in the valid range for I/O Port operations
- //
- Width = (EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH) (Width & 0x03);
- if ((OperationType != MemOperation) && (Width == EfiPciWidthUint64)) {
- ASSERT (FALSE);
- return EFI_INVALID_PARAMETER;
- }
-
- //
- // Check to see if Address is aligned
- //
- if ((Address & (UINT64)(mInStride[Width] - 1)) != 0) {
- return EFI_UNSUPPORTED;
- }
-
- PrivateData = DRIVER_INSTANCE_FROM_PCI_ROOT_BRIDGE_IO_THIS (This);
-
- //
- // Check to see if any address associated with this transfer exceeds the maximum
- // allowed address. The maximum address implied by the parameters passed in is
- // Address + Size * Count. If the following condition is met, then the transfer
- // is not supported.
- //
- // Address + Size * Count > Limit + 1
- //
- // Since Limit can be the maximum integer value supported by the CPU and Count
- // can also be the maximum integer value supported by the CPU, this range
- // check must be adjusted to avoid all oveflow conditions.
- //
- // The following form of the range check is equivalent but assumes that
- // Limit is of the form (2^n - 1).
- //
- if (OperationType == IoOperation) {
- Base = PrivateData->IoBase;
- Limit = PrivateData->IoLimit;
- } else if (OperationType == MemOperation) {
- Base = PrivateData->MemBase;
- Limit = PrivateData->MemLimit;
- } else {
- PciRbAddr = (EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_PCI_ADDRESS*) &Address;
- if (PciRbAddr->Bus < PrivateData->BusBase || PciRbAddr->Bus > PrivateData->BusLimit) {
- return EFI_INVALID_PARAMETER;
- }
-
- /* The root complex has only one device / function */
- if (PciRbAddr->Bus == PrivateData->BusBase && PciRbAddr->Device != 0) {
- return EFI_INVALID_PARAMETER;
- }
-
- /* The other side of the RC has only one device as well */
- if (PciRbAddr->Bus == (PrivateData->BusBase + 1 ) && PciRbAddr->Device != 0) {
- return EFI_INVALID_PARAMETER;
- }
-
- if (PciRbAddr->Device > MAX_PCI_DEVICE_NUMBER || PciRbAddr->Function > MAX_PCI_FUNCTION_NUMBER) {
- return EFI_INVALID_PARAMETER;
- }
-
- if (PciRbAddr->ExtendedRegister != 0) {
- Address = PciRbAddr->ExtendedRegister;
- } else {
- Address = PciRbAddr->Register;
- }
- Base = 0;
- Limit = MAX_PCI_REG_ADDRESS;
- }
-
- if (Address < Base) {
- return EFI_INVALID_PARAMETER;
- }
-
- if (Count == 0) {
- if (Address > Limit) {
- return EFI_UNSUPPORTED;
- }
- } else {
- MaxCount = RShiftU64 (Limit, Width);
- if (MaxCount < (Count - 1)) {
- return EFI_UNSUPPORTED;
- }
- if (Address > LShiftU64 (MaxCount - Count + 1, Width)) {
- return EFI_UNSUPPORTED;
- }
- }
-
- return EFI_SUCCESS;
-}
-
-/**
- Internal help function for read and write memory space.
-
- @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL.
- @param[in] Write Switch value for Read or Write.
- @param[in] Width Signifies the width of the memory operations.
- @param[in] UserAddress The address within the PCI configuration space for the PCI controller.
- @param[in] Count The number of PCI configuration operations to perform. Bytes
- moved is Width size * Count, starting at Address.
- @param[in, out] UserBuffer For read operations, the destination buffer to store the results. For
- write operations, the source buffer to write data from.
-
- @retval EFI_SUCCESS The data was read from or written to the PCI root bridge.
- @retval EFI_INVALID_PARAMETER Width is invalid for this PCI root bridge.
- @retval EFI_INVALID_PARAMETER Buffer is NULL.
- @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources.
-
-**/
-EFI_STATUS
-RootBridgeIoMemRW (
- IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This,
- IN BOOLEAN Write,
- IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH Width,
- IN UINT64 Address,
- IN UINTN Count,
- IN OUT VOID *Buffer
- )
-{
- EFI_STATUS Status;
- UINT8 InStride;
- UINT8 OutStride;
- EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH OperationWidth;
- UINT8 *Uint8Buffer;
- PCI_ROOT_BRIDGE_INSTANCE *PrivateData;
-
- PrivateData = DRIVER_INSTANCE_FROM_PCI_ROOT_BRIDGE_IO_THIS (This);
- /* Address is bus resource */
- Address -= PrivateData->PciRegionBase;
- Address += PrivateData->CpuMemRegionBase;
-
- PCIE_DEBUG("RootBridgeIoMemRW Address:0x%llx\n", Address);
- PCIE_DEBUG("RootBridgeIoMemRW Count:0x%llx\n", Count);
- PCIE_DEBUG("RootBridgeIoMemRW Write:0x%llx\n", Write);
- PCIE_DEBUG("RootBridgeIoMemRW Width:0x%llx\n", Width);
-
- Status = RootBridgeIoCheckParameter (This, MemOperation, Width, Address, Count, Buffer);
- if (EFI_ERROR (Status)) {
- return Status;
- }
-
- InStride = mInStride[Width];
- OutStride = mOutStride[Width];
- OperationWidth = (EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH) (Width & 0x03);
- for (Uint8Buffer = Buffer; Count > 0; Address += InStride, Uint8Buffer += OutStride, Count--) {
- if (Write) {
- switch (OperationWidth) {
- case EfiPciWidthUint8:
- MmioWrite8 ((UINTN)Address, *Uint8Buffer);
- break;
- case EfiPciWidthUint16:
- MmioWrite16 ((UINTN)Address, *((UINT16 *)Uint8Buffer));
- break;
- case EfiPciWidthUint32:
- MmioWrite32 ((UINTN)Address, *((UINT32 *)Uint8Buffer));
- break;
- case EfiPciWidthUint64:
- MmioWrite64 ((UINTN)Address, *((UINT64 *)Uint8Buffer));
- break;
- default:
- //
- // The RootBridgeIoCheckParameter call above will ensure that this
- // path is not taken.
- //
- ASSERT (FALSE);
- break;
- }
- } else {
- switch (OperationWidth) {
- case EfiPciWidthUint8:
- *Uint8Buffer = MmioRead8 ((UINTN)Address);
- break;
- case EfiPciWidthUint16:
- *((UINT16 *)Uint8Buffer) = MmioRead16 ((UINTN)Address);
- break;
- case EfiPciWidthUint32:
- *((UINT32 *)Uint8Buffer) = MmioRead32 ((UINTN)Address);
- break;
- case EfiPciWidthUint64:
- *((UINT64 *)Uint8Buffer) = MmioRead64 ((UINTN)Address);
- break;
- default:
- //
- // The RootBridgeIoCheckParameter call above will ensure that this
- // path is not taken.
- //
- ASSERT (FALSE);
- break;
- }
- }
- }
- return EFI_SUCCESS;
-}
-
-/**
- Internal help function for read and write IO space.
-
- @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL.
- @param[in] Write Switch value for Read or Write.
- @param[in] Width Signifies the width of the memory operations.
- @param[in] UserAddress The address within the PCI configuration space for the PCI controller.
- @param[in] Count The number of PCI configuration operations to perform. Bytes
- moved is Width size * Count, starting at Address.
- @param[in, out] UserBuffer For read operations, the destination buffer to store the results. For
- write operations, the source buffer to write data from.
-
- @retval EFI_SUCCESS The data was read from or written to the PCI root bridge.
- @retval EFI_INVALID_PARAMETER Width is invalid for this PCI root bridge.
- @retval EFI_INVALID_PARAMETER Buffer is NULL.
- @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources.
-
-**/
-EFI_STATUS
-RootBridgeIoIoRW (
- IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This,
- IN BOOLEAN Write,
- IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH Width,
- IN UINT64 Address,
- IN UINTN Count,
- IN OUT VOID *Buffer
- )
-{
- EFI_STATUS Status;
- UINT8 InStride;
- UINT8 OutStride;
- EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH OperationWidth;
- UINT8 *Uint8Buffer;
- PCI_ROOT_BRIDGE_INSTANCE *PrivateData;
-
- PrivateData = DRIVER_INSTANCE_FROM_PCI_ROOT_BRIDGE_IO_THIS (This);
- /* Address is bus resource */
- Address -= PrivateData->IoBase;
- Address += PrivateData->CpuIoRegionBase;
-
- Status = RootBridgeIoCheckParameter (This, IoOperation, Width, Address, Count, Buffer);
- if (EFI_ERROR (Status)) {
- return Status;
- }
-
- InStride = mInStride[Width];
- OutStride = mOutStride[Width];
- OperationWidth = (EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH) (Width & 0x03);
-
- for (Uint8Buffer = Buffer; Count > 0; Address += InStride, Uint8Buffer += OutStride, Count--) {
- if (Write) {
- switch (OperationWidth) {
- case EfiPciWidthUint8:
- MmioWrite8 ((UINTN)Address, *Uint8Buffer);
- break;
- case EfiPciWidthUint16:
- MmioWrite16 ((UINTN)Address, *((UINT16 *)Uint8Buffer));
- break;
- case EfiPciWidthUint32:
- MmioWrite32 ((UINTN)Address, *((UINT32 *)Uint8Buffer));
- break;
- case EfiPciWidthUint64:
- MmioWrite64 ((UINTN)Address, *((UINT64 *)Uint8Buffer));
- break;
- default:
- //
- // The RootBridgeIoCheckParameter call above will ensure that this
- // path is not taken.
- //
- ASSERT (FALSE);
- break;
- }
- } else {
- switch (OperationWidth) {
- case EfiPciWidthUint8:
- *Uint8Buffer = MmioRead8 ((UINTN)Address);
- break;
- case EfiPciWidthUint16:
- *((UINT16 *)Uint8Buffer) = MmioRead16 ((UINTN)Address);
- break;
- case EfiPciWidthUint32:
- *((UINT32 *)Uint8Buffer) = MmioRead32 ((UINTN)Address);
- break;
- case EfiPciWidthUint64:
- *((UINT64 *)Uint8Buffer) = MmioRead64 ((UINTN)Address);
- break;
- default:
- //
- // The RootBridgeIoCheckParameter call above will ensure that this
- // path is not taken.
- //
- ASSERT (FALSE);
- break;
- }
- }
- }
- return EFI_SUCCESS;
-}
-
-
-/**
- Polls an address in memory mapped I/O space until an exit condition is met, or
- a timeout occurs.
-
- This function provides a standard way to poll a PCI memory location. A PCI memory read
- operation is performed at the PCI memory address specified by Address for the width specified
- by Width. The result of this PCI memory read operation is stored in Result. This PCI memory
- read operation is repeated until either a timeout of Delay 100 ns units has expired, or (Result &
- Mask) is equal to Value.
-
- @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL.
- @param[in] Width Signifies the width of the memory operations.
- @param[in] Address The base address of the memory operations. The caller is
- responsible for aligning Address if required.
- @param[in] Mask Mask used for the polling criteria. Bytes above Width in Mask
- are ignored. The bits in the bytes below Width which are zero in
- Mask are ignored when polling the memory address.
- @param[in] Value The comparison value used for the polling exit criteria.
- @param[in] Delay The number of 100 ns units to poll. Note that timer available may
- be of poorer granularity.
- @param[out] Result Pointer to the last value read from the memory location.
-
- @retval EFI_SUCCESS The last data returned from the access matched the poll exit criteria.
- @retval EFI_INVALID_PARAMETER Width is invalid.
- @retval EFI_INVALID_PARAMETER Result is NULL.
- @retval EFI_TIMEOUT Delay expired before a match occurred.
- @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources.
-
-**/
-EFI_STATUS
-EFIAPI
-RootBridgeIoPollMem (
- IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This,
- IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH Width,
- IN UINT64 Address,
- IN UINT64 Mask,
- IN UINT64 Value,
- IN UINT64 Delay,
- OUT UINT64 *Result
- )
-{
- EFI_STATUS Status;
- UINT64 NumberOfTicks;
- UINT32 Remainder;
-
- if (Result == NULL) {
- return EFI_INVALID_PARAMETER;
- }
-
- //
- // No matter what, always do a single poll.
- //
- Status = This->Mem.Read (This, Width, Address, 1, Result);
- if (EFI_ERROR (Status)) {
- return Status;
- }
- if ((*Result & Mask) == Value) {
- return EFI_SUCCESS;
- }
-
- if (Delay == 0) {
- return EFI_TIMEOUT;
-
- } else {
-
- //
- // Determine the proper # of metronome ticks to wait for polling the
- // location. The nuber of ticks is Roundup (Delay / mMetronome->TickPeriod)+1
- // The "+1" to account for the possibility of the first tick being short
- // because we started in the middle of a tick.
- //
- // BugBug: overriding mMetronome->TickPeriod with UINT32 until Metronome
- // protocol definition is updated.
- //
- NumberOfTicks = DivU64x32Remainder (Delay, (UINT32) mMetronome->TickPeriod, &Remainder);
- if (Remainder != 0) {
- NumberOfTicks += 1;
- }
- NumberOfTicks += 1;
-
- while (NumberOfTicks != 0) {
-
- mMetronome->WaitForTick (mMetronome, 1);
-
- Status = This->Mem.Read (This, Width, Address, 1, Result);
- if (EFI_ERROR (Status)) {
- return Status;
- }
-
- if ((*Result & Mask) == Value) {
- return EFI_SUCCESS;
- }
-
- NumberOfTicks -= 1;
- }
- }
- return EFI_TIMEOUT;
-}
-
-/**
- Reads from the I/O space of a PCI Root Bridge. Returns when either the polling exit criteria is
- satisfied or after a defined duration.
-
- This function provides a standard way to poll a PCI I/O location. A PCI I/O read operation is
- performed at the PCI I/O address specified by Address for the width specified by Width.
- The result of this PCI I/O read operation is stored in Result. This PCI I/O read operation is
- repeated until either a timeout of Delay 100 ns units has expired, or (Result & Mask) is equal
- to Value.
-
- @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL.
- @param[in] Width Signifies the width of the I/O operations.
- @param[in] Address The base address of the I/O operations. The caller is responsible
- for aligning Address if required.
- @param[in] Mask Mask used for the polling criteria. Bytes above Width in Mask
- are ignored. The bits in the bytes below Width which are zero in
- Mask are ignored when polling the I/O address.
- @param[in] Value The comparison value used for the polling exit criteria.
- @param[in] Delay The number of 100 ns units to poll. Note that timer available may
- be of poorer granularity.
- @param[out] Result Pointer to the last value read from the memory location.
-
- @retval EFI_SUCCESS The last data returned from the access matched the poll exit criteria.
- @retval EFI_INVALID_PARAMETER Width is invalid.
- @retval EFI_INVALID_PARAMETER Result is NULL.
- @retval EFI_TIMEOUT Delay expired before a match occurred.
- @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources.
-
-**/
-EFI_STATUS
-EFIAPI
-RootBridgeIoPollIo (
- IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This,
- IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH Width,
- IN UINT64 Address,
- IN UINT64 Mask,
- IN UINT64 Value,
- IN UINT64 Delay,
- OUT UINT64 *Result
- )
-{
- EFI_STATUS Status;
- UINT64 NumberOfTicks;
- UINT32 Remainder;
-
- //
- // No matter what, always do a single poll.
- //
-
- if (Result == NULL) {
- return EFI_INVALID_PARAMETER;
- }
-
- Status = This->Io.Read (This, Width, Address, 1, Result);
- if (EFI_ERROR (Status)) {
- return Status;
- }
- if ((*Result & Mask) == Value) {
- return EFI_SUCCESS;
- }
-
- if (Delay == 0) {
- return EFI_SUCCESS;
-
- } else {
-
- //
- // Determine the proper # of metronome ticks to wait for polling the
- // location. The number of ticks is Roundup (Delay / mMetronome->TickPeriod)+1
- // The "+1" to account for the possibility of the first tick being short
- // because we started in the middle of a tick.
- //
- NumberOfTicks = DivU64x32Remainder (Delay, (UINT32)mMetronome->TickPeriod, &Remainder);
- if (Remainder != 0) {
- NumberOfTicks += 1;
- }
- NumberOfTicks += 1;
-
- while (NumberOfTicks != 0) {
-
- mMetronome->WaitForTick (mMetronome, 1);
-
- Status = This->Io.Read (This, Width, Address, 1, Result);
- if (EFI_ERROR (Status)) {
- return Status;
- }
-
- if ((*Result & Mask) == Value) {
- return EFI_SUCCESS;
- }
-
- NumberOfTicks -= 1;
- }
- }
- return EFI_TIMEOUT;
-}
-
-/**
- Enables a PCI driver to access PCI controller registers in the PCI root bridge memory space.
-
- The Mem.Read(), and Mem.Write() functions enable a driver to access PCI controller
- registers in the PCI root bridge memory space.
- The memory operations are carried out exactly as requested. The caller is responsible for satisfying
- any alignment and memory width restrictions that a PCI Root Bridge on a platform might require.
-
- @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL.
- @param[in] Width Signifies the width of the memory operation.
- @param[in] Address The base address of the memory operation. The caller is
- responsible for aligning the Address if required.
- @param[in] Count The number of memory operations to perform. Bytes moved is
- Width size * Count, starting at Address.
- @param[out] Buffer For read operations, the destination buffer to store the results. For
- write operations, the source buffer to write data from.
-
- @retval EFI_SUCCESS The data was read from or written to the PCI root bridge.
- @retval EFI_INVALID_PARAMETER Width is invalid for this PCI root bridge.
- @retval EFI_INVALID_PARAMETER Buffer is NULL.
- @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources.
-
-**/
-EFI_STATUS
-EFIAPI
-RootBridgeIoMemRead (
- IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This,
- IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH Width,
- IN UINT64 Address,
- IN UINTN Count,
- OUT VOID *Buffer
- )
-{
- return RootBridgeIoMemRW (This, FALSE, Width, Address, Count, Buffer);
-}
-
-/**
- Enables a PCI driver to access PCI controller registers in the PCI root bridge memory space.
-
- The Mem.Read(), and Mem.Write() functions enable a driver to access PCI controller
- registers in the PCI root bridge memory space.
- The memory operations are carried out exactly as requested. The caller is responsible for satisfying
- any alignment and memory width restrictions that a PCI Root Bridge on a platform might require.
-
- @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL.
- @param[in] Width Signifies the width of the memory operation.
- @param[in] Address The base address of the memory operation. The caller is
- responsible for aligning the Address if required.
- @param[in] Count The number of memory operations to perform. Bytes moved is
- Width size * Count, starting at Address.
- @param[in] Buffer For read operations, the destination buffer to store the results. For
- write operations, the source buffer to write data from.
-
- @retval EFI_SUCCESS The data was read from or written to the PCI root bridge.
- @retval EFI_INVALID_PARAMETER Width is invalid for this PCI root bridge.
- @retval EFI_INVALID_PARAMETER Buffer is NULL.
- @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources.
-**/
-EFI_STATUS
-EFIAPI
-RootBridgeIoMemWrite (
- IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This,
- IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH Width,
- IN UINT64 Address,
- IN UINTN Count,
- IN VOID *Buffer
- )
-{
- return RootBridgeIoMemRW (This, TRUE, Width, Address, Count, Buffer);
-}
-
-/**
- Enables a PCI driver to access PCI controller registers in the PCI root bridge I/O space.
-
- @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL.
- @param[in] Width Signifies the width of the memory operations.
- @param[in] Address The base address of the I/O operation. The caller is responsible for
- aligning the Address if required.
- @param[in] Count The number of I/O operations to perform. Bytes moved is Width
- size * Count, starting at Address.
- @param[out] Buffer For read operations, the destination buffer to store the results. For
- write operations, the source buffer to write data from.
-
- @retval EFI_SUCCESS The data was read from or written to the PCI root bridge.
- @retval EFI_INVALID_PARAMETER Width is invalid for this PCI root bridge.
- @retval EFI_INVALID_PARAMETER Buffer is NULL.
- @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources.
-
-**/
-EFI_STATUS
-EFIAPI
-RootBridgeIoIoRead (
- IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This,
- IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH Width,
- IN UINT64 Address,
- IN UINTN Count,
- OUT VOID *Buffer
- )
-{
- return RootBridgeIoIoRW (This, FALSE, Width, Address, Count, Buffer);
-}
-
-/**
- Enables a PCI driver to access PCI controller registers in the PCI root bridge I/O space.
-
- @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL.
- @param[in] Width Signifies the width of the memory operations.
- @param[in] Address The base address of the I/O operation. The caller is responsible for
- aligning the Address if required.
- @param[in] Count The number of I/O operations to perform. Bytes moved is Width
- size * Count, starting at Address.
- @param[in] Buffer For read operations, the destination buffer to store the results. For
- write operations, the source buffer to write data from.
-
- @retval EFI_SUCCESS The data was read from or written to the PCI root bridge.
- @retval EFI_INVALID_PARAMETER Width is invalid for this PCI root bridge.
- @retval EFI_INVALID_PARAMETER Buffer is NULL.
- @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources.
-
-**/
-EFI_STATUS
-EFIAPI
-RootBridgeIoIoWrite (
- IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This,
- IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH Width,
- IN UINT64 Address,
- IN UINTN Count,
- IN VOID *Buffer
- )
-{
- return RootBridgeIoIoRW (This, TRUE, Width, Address, Count, Buffer);
-}
-
-/**
- Enables a PCI driver to copy one region of PCI root bridge memory space to another region of PCI
- root bridge memory space.
-
- The CopyMem() function enables a PCI driver to copy one region of PCI root bridge memory
- space to another region of PCI root bridge memory space. This is especially useful for video scroll
- operation on a memory mapped video buffer.
- The memory operations are carried out exactly as requested. The caller is responsible for satisfying
- any alignment and memory width restrictions that a PCI root bridge on a platform might require.
-
- @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL instance.
- @param[in] Width Signifies the width of the memory operations.
- @param[in] DestAddress The destination address of the memory operation. The caller is
- responsible for aligning the DestAddress if required.
- @param[in] SrcAddress The source address of the memory operation. The caller is
- responsible for aligning the SrcAddress if required.
- @param[in] Count The number of memory operations to perform. Bytes moved is
- Width size * Count, starting at DestAddress and SrcAddress.
-
- @retval EFI_SUCCESS The data was copied from one memory region to another memory region.
- @retval EFI_INVALID_PARAMETER Width is invalid for this PCI root bridge.
- @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources.
-
-**/
-EFI_STATUS
-EFIAPI
-RootBridgeIoCopyMem (
- IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This,
- IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH Width,
- IN UINT64 DestAddress,
- IN UINT64 SrcAddress,
- IN UINTN Count
- )
-{
- EFI_STATUS Status;
- BOOLEAN Direction;
- UINTN Stride;
- UINTN Index;
- UINT64 Result;
-
- if ((UINT32)Width > EfiPciWidthUint64) {
- return EFI_INVALID_PARAMETER;
- }
-
- if (DestAddress == SrcAddress) {
- return EFI_SUCCESS;
- }
-
- Stride = (UINTN)((UINTN)1 << Width);
-
- Direction = TRUE;
- if ((DestAddress > SrcAddress) && (DestAddress < (SrcAddress + Count * Stride))) {
- Direction = FALSE;
- SrcAddress = SrcAddress + (Count-1) * Stride;
- DestAddress = DestAddress + (Count-1) * Stride;
- }
-
- for (Index = 0;Index < Count;Index++) {
- Status = RootBridgeIoMemRead (
- This,
- Width,
- SrcAddress,
- 1,
- &Result
- );
- if (EFI_ERROR (Status)) {
- return Status;
- }
- Status = RootBridgeIoMemWrite (
- This,
- Width,
- DestAddress,
- 1,
- &Result
- );
- if (EFI_ERROR (Status)) {
- return Status;
- }
- if (Direction) {
- SrcAddress += Stride;
- DestAddress += Stride;
- } else {
- SrcAddress -= Stride;
- DestAddress -= Stride;
- }
- }
- return EFI_SUCCESS;
-}
-
-/**
- Reads memory-mapped registers.
- @param[in] Width Signifies the width of the I/O or Memory operation.
- @param[in] Address The base address of the I/O operation.
- @param[in] Count The number of I/O operations to perform. The number of
- bytes moved is Width size * Count, starting at Address.
- @param[out] Buffer For read operations, the destination buffer to store the results.
- For write operations, the source buffer from which to write data.
-
- @retval EFI_SUCCESS The data was read from or written to the PI system.
- @retval EFI_INVALID_PARAMETER Width is invalid for this PI system.
- @retval EFI_INVALID_PARAMETER Buffer is NULL.
- @retval EFI_UNSUPPORTED The Buffer is not aligned for the given Width.
- @retval EFI_UNSUPPORTED The address range specified by Address, Width,
- and Count is not valid for this PI system.
-
-**/
-EFI_STATUS
-CpuMemoryServiceRead (
- IN EFI_CPU_IO_PROTOCOL_WIDTH Width,
- IN UINT64 Address,
- IN UINTN Count,
- OUT VOID *Buffer
- )
-{
-
- UINT8 InStride;
- UINT8 OutStride;
- EFI_CPU_IO_PROTOCOL_WIDTH OperationWidth;
- UINT8 *Uint8Buffer;
- UINT32 Uint32Buffer = 0;
-
- //
- // Select loop based on the width of the transfer
- //
- InStride = mInStride[Width];
- OutStride = mOutStride[Width];
- OperationWidth = (EFI_CPU_IO_PROTOCOL_WIDTH) (Width & 0x03);
- for (Uint8Buffer = Buffer; Count > 0; Address += InStride, Uint8Buffer += OutStride, Count--) {
- if (OperationWidth == EfiCpuIoWidthUint8) {
- Uint32Buffer = MmioRead32((UINTN)(Address & (~0x3)));
- Uint32Buffer &= (0xFF << ((Address & 0x3) * 8));
- *((UINT8*)Uint8Buffer) = (UINT8)(Uint32Buffer >> (((Address & 0x3) * 8)));
- } else if (OperationWidth == EfiCpuIoWidthUint16) {
- if (((Address & 0x3) == 1) || ((Address & 0x3) == 3)) {
- return EFI_INVALID_PARAMETER;
- }
- Uint32Buffer = MmioRead32((UINTN)(Address & (~0x3)));
- Uint32Buffer &= (0xFFFF << ((Address & 0x3) * 8));
- *(UINT16 *)Uint8Buffer = (UINT16)(Uint32Buffer >> (((Address & 0x3) * 8)));
- } else if (OperationWidth == EfiCpuIoWidthUint32) {
- *((UINT32 *)Uint8Buffer) = MmioRead32 ((UINTN)Address);
- } else if (OperationWidth == EfiCpuIoWidthUint64) {
- *((UINT64 *)Uint8Buffer) = MmioRead64 ((UINTN)Address);
- }
- }
- return EFI_SUCCESS;
-}
-
-/**
- Enables a PCI driver to access PCI controller registers in a PCI root bridge's configuration space.
-
- The Pci.Read() and Pci.Write() functions enable a driver to access PCI configuration
- registers for a PCI controller.
- The PCI Configuration operations are carried out exactly as requested. The caller is responsible for
- any alignment and PCI configuration width issues that a PCI Root Bridge on a platform might
- require.
-
- @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL.
- @param[in] Width Signifies the width of the memory operations.
- @param[in] Address The address within the PCI configuration space for the PCI controller.
- @param[in] Count The number of PCI configuration operations to perform. Bytes
- moved is Width size * Count, starting at Address.
- @param[out] Buffer For read operations, the destination buffer to store the results. For
- write operations, the source buffer to write data from.
-
- @retval EFI_SUCCESS The data was read from or written to the PCI root bridge.
- @retval EFI_INVALID_PARAMETER Width is invalid for this PCI root bridge.
- @retval EFI_INVALID_PARAMETER Buffer is NULL.
- @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources.
-
-**/
-EFI_STATUS
-EFIAPI
-RootBridgeIoPciRead (
- IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This,
- IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH Width,
- IN UINT64 EfiAddress,
- IN UINTN Count,
- OUT VOID *Buffer
- )
-{
- UINT32 Offset;
- EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_PCI_ADDRESS *EfiPciAddress;
- UINT64 Address;
- PCI_ROOT_BRIDGE_INSTANCE *PrivateData;
-
- EfiPciAddress = (EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_PCI_ADDRESS *)&EfiAddress;
- PrivateData = DRIVER_INSTANCE_FROM_PCI_ROOT_BRIDGE_IO_THIS(This);
-
- if (Buffer == NULL) {
- return EFI_INVALID_PARAMETER;
- }
-
- if (Width >= EfiPciWidthMaximum) {
- return EFI_INVALID_PARAMETER;
- }
-
- if (EfiPciAddress->ExtendedRegister) {
- Offset = EfiPciAddress->ExtendedRegister;
- } else {
- Offset = EfiPciAddress->Register;
- }
-
- PCIE_DEBUG ("[%a:%d] - bus %x dev %x func %x Off %x\n", __FUNCTION__, __LINE__,
- EfiPciAddress->Bus,
- EfiPciAddress->Device,
- EfiPciAddress->Function,
- Offset
- );
- if (EfiPciAddress->Bus < PrivateData->BusBase || EfiPciAddress->Bus > PrivateData->BusLimit) {
- PCIE_DEBUG ("[%a:%d] - Bus number out of range %d\n", __FUNCTION__, __LINE__, EfiPciAddress->Bus);
- SetMem (Buffer, mOutStride[Width] * Count, 0xFF);
- return EFI_INVALID_PARAMETER;
- }
-
- // The UEFI PCI enumerator scans for devices at all possible addresses,
- // and ignores some PCI rules - this results in some hardware being
- // detected multiple times. We work around this by faking absent
- // devices
- if(EfiPciAddress->Bus == PrivateData->BusBase)
- {
- if((EfiPciAddress->Device != 0x0) || (EfiPciAddress->Function != 0)) {
- SetMem (Buffer, mOutStride[Width] * Count, 0xFF);
- return EFI_UNSUPPORTED;
- }
- }
-
- if (EfiPciAddress->Bus == PrivateData->BusBase){
- Address = PrivateData->RbPciBar + Offset;
- }
- else if(EfiPciAddress->Bus == PrivateData->BusBase + 1)
- {
- if (!PcieIsLinkUp(PrivateData->SocType,PrivateData->RbPciBar, PrivateData->Port))
- {
- SetMem (Buffer, mOutStride[Width] * Count, 0xFF);
- return EFI_NOT_READY;
- }
- Address = GetPcieCfgAddress (
- PrivateData->Ecam,
- EfiPciAddress->Bus,
- EfiPciAddress->Device,
- EfiPciAddress->Function,
- Offset
- );
- }
- else
- {
- Address = GetPcieCfgAddress (
- PrivateData->Ecam,
- EfiPciAddress->Bus,
- EfiPciAddress->Device,
- EfiPciAddress->Function,
- Offset
- );
- }
-
- (VOID)CpuMemoryServiceRead((EFI_CPU_IO_PROTOCOL_WIDTH)Width, Address, Count, Buffer);
- PCIE_DEBUG ("[%a:%d] - %x\n", __FUNCTION__, __LINE__, *(UINT32 *)Buffer);
-
- return EFI_SUCCESS;
-}
-
-/**
- Writes memory-mapped registers.
- @param[in] Width Signifies the width of the I/O or Memory operation.
- @param[in] Address The base address of the I/O operation.
- @param[in] Count The number of I/O operations to perform. The number of
- bytes moved is Width size * Count, starting at Address.
- @param[in] Buffer For read operations, the destination buffer to store the results.
- For write operations, the source buffer from which to write data.
-
- @retval EFI_SUCCESS The data was read from or written to the PI system.
- @retval EFI_INVALID_PARAMETER Width is invalid for this PI system.
- @retval EFI_INVALID_PARAMETER Buffer is NULL.
- @retval EFI_UNSUPPORTED The Buffer is not aligned for the given Width.
- @retval EFI_UNSUPPORTED The address range specified by Address, Width,
- and Count is not valid for this PI system.
-
-**/
-EFI_STATUS
-CpuMemoryServiceWrite (
- IN EFI_CPU_IO_PROTOCOL_WIDTH Width,
- IN UINT64 Address,
- IN UINTN Count,
- IN VOID *Buffer
- )
-{
- UINT8 InStride;
- UINT8 OutStride;
- EFI_CPU_IO_PROTOCOL_WIDTH OperationWidth;
- UINT8 *Uint8Buffer;
- UINT32 Uint32Buffer;
-
- //
- // Select loop based on the width of the transfer
- //
- InStride = mInStride[Width];
- OutStride = mOutStride[Width];
- OperationWidth = (EFI_CPU_IO_PROTOCOL_WIDTH) (Width & 0x03);
- for (Uint8Buffer = Buffer; Count > 0; Address += InStride, Uint8Buffer += OutStride, Count--) {
- if (OperationWidth == EfiCpuIoWidthUint8) {
- Uint32Buffer = MmioRead32 ((UINTN)(Address & (~0x03)));
- Uint32Buffer &= ~(UINT32)(0xFF << ((Address & 0x3) * 8));
- Uint32Buffer |= (UINT32)(*(UINT8 *)Uint8Buffer) << ((Address & 0x3) * 8);
- MmioWrite32 ((UINTN)(Address & (~0x03)), Uint32Buffer);
- } else if (OperationWidth == EfiCpuIoWidthUint16) {
- if (((Address & 0x3) == 1) || ((Address & 0x3) == 3)) {
- return EFI_INVALID_PARAMETER;
- }
- Uint32Buffer = MmioRead32 ((UINTN)(Address & (~0x03)));
- Uint32Buffer &= ~(UINT32)(0xFFFF << ((Address & 0x3) * 8));
- Uint32Buffer |= (UINT32)(*(UINT16 *)Uint8Buffer) << ((Address & 0x3) * 8);
- MmioWrite32 ((UINTN)(Address & (~0x03)), Uint32Buffer);
- } else if (OperationWidth == EfiCpuIoWidthUint32) {
- MmioWrite32 ((UINTN)Address, *((UINT32 *)Uint8Buffer));
- } else if (OperationWidth == EfiCpuIoWidthUint64) {
- MmioWrite64 ((UINTN)Address, *((UINT64 *)Uint8Buffer));
- }
- }
- return EFI_SUCCESS;
-}
-
-/**
- Enables a PCI driver to access PCI controller registers in a PCI root bridge's configuration space.
-
- The Pci.Read() and Pci.Write() functions enable a driver to access PCI configuration
- registers for a PCI controller.
- The PCI Configuration operations are carried out exactly as requested. The caller is responsible for
- any alignment and PCI configuration width issues that a PCI Root Bridge on a platform might
- require.
-
- @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL.
- @param[in] Width Signifies the width of the memory operations.
- @param[in] Address The address within the PCI configuration space for the PCI controller.
- @param[in] Count The number of PCI configuration operations to perform. Bytes
- moved is Width size * Count, starting at Address.
- @param[in] Buffer For read operations, the destination buffer to store the results. For
- write operations, the source buffer to write data from.
-
- @retval EFI_SUCCESS The data was read from or written to the PCI root bridge.
- @retval EFI_INVALID_PARAMETER Width is invalid for this PCI root bridge.
- @retval EFI_INVALID_PARAMETER Buffer is NULL.
- @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources.
-
-**/
-EFI_STATUS
-EFIAPI
-RootBridgeIoPciWrite (
- IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This,
- IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH Width,
- IN UINT64 EfiAddress,
- IN UINTN Count,
- IN VOID *Buffer
- )
-{
- UINT32 Offset;
- EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_PCI_ADDRESS *EfiPciAddress;
- UINT64 Address;
- PCI_ROOT_BRIDGE_INSTANCE *PrivateData;
-
- EfiPciAddress = (EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_PCI_ADDRESS *)&EfiAddress;
- PrivateData = DRIVER_INSTANCE_FROM_PCI_ROOT_BRIDGE_IO_THIS(This);
-
- if (Buffer == NULL) {
- return EFI_INVALID_PARAMETER;
- }
-
- if (Width >= EfiPciWidthMaximum) {
- return EFI_INVALID_PARAMETER;
- }
-
- if (EfiPciAddress->ExtendedRegister)
- Offset = EfiPciAddress->ExtendedRegister;
- else
- Offset = EfiPciAddress->Register;
-
- PCIE_DEBUG ("[%a:%d] - bus %x dev %x func %x Off %x\n", __FUNCTION__, __LINE__,
- EfiPciAddress->Bus,
- EfiPciAddress->Device,
- EfiPciAddress->Function,
- Offset
- );
- if (((EfiPciAddress->Bus == PrivateData->BusBase) && (EfiPciAddress->Device == 0x00) && (EfiPciAddress->Function == 0))){
- Address = PrivateData->RbPciBar + Offset;
- if ((Offset == 0x14) || (Offset == 0x10)) {
- return EFI_SUCCESS;
- }
- }
- else if (EfiPciAddress->Bus == PrivateData->BusBase + 1)
- {
- if (!PcieIsLinkUp(PrivateData->SocType,PrivateData->RbPciBar, PrivateData->Port)) {
- return EFI_NOT_READY;
- }
- Address = GetPcieCfgAddress (
- PrivateData->Ecam,
- EfiPciAddress->Bus,
- EfiPciAddress->Device,
- EfiPciAddress->Function,
- Offset
- );
- }
- else
- {
- Address = GetPcieCfgAddress (
- PrivateData->Ecam,
- EfiPciAddress->Bus,
- EfiPciAddress->Device,
- EfiPciAddress->Function,
- Offset
- );
- }
-
- (VOID)CpuMemoryServiceWrite ((EFI_CPU_IO_PROTOCOL_WIDTH)Width, Address, Count, Buffer);
- PCIE_DEBUG ("[%a:%d] - 0x%08x\n", __FUNCTION__, __LINE__, *(UINT32 *)Buffer);
- return EFI_SUCCESS;
-}
-
-/**
- Provides the PCI controller-specific addresses required to access system memory from a
- DMA bus master.
-
- The Map() function provides the PCI controller specific addresses needed to access system
- memory. This function is used to map system memory for PCI bus master DMA accesses.
-
- @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL.
- @param[in] Operation Indicates if the bus master is going to read or write to system memory.
- @param[in] HostAddress The system memory address to map to the PCI controller.
- @param[in, out] NumberOfBytes On input the number of bytes to map. On output the number of bytes that were mapped.
- @param[out] DeviceAddress The resulting map address for the bus master PCI controller to use
- to access the system memory's HostAddress.
- @param[out] Mapping The value to pass to Unmap() when the bus master DMA operation is complete.
-
- @retval EFI_SUCCESS The range was mapped for the returned NumberOfBytes.
- @retval EFI_INVALID_PARAMETER Operation is invalid.
- @retval EFI_INVALID_PARAMETER HostAddress is NULL.
- @retval EFI_INVALID_PARAMETER NumberOfBytes is NULL.
- @retval EFI_INVALID_PARAMETER DeviceAddress is NULL.
- @retval EFI_INVALID_PARAMETER Mapping is NULL.
- @retval EFI_UNSUPPORTED The HostAddress cannot be mapped as a common buffer.
- @retval EFI_DEVICE_ERROR The system hardware could not map the requested address.
- @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources.
-
-**/
-EFI_STATUS
-EFIAPI
-RootBridgeIoMap (
- IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This,
- IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_OPERATION Operation,
- IN VOID *HostAddress,
- IN OUT UINTN *NumberOfBytes,
- OUT EFI_PHYSICAL_ADDRESS *DeviceAddress,
- OUT VOID **Mapping
- )
-{
- DMA_MAP_OPERATION DmaOperation;
-
- if (Operation == EfiPciOperationBusMasterRead) {
- DmaOperation = MapOperationBusMasterRead;
- } else if (Operation == EfiPciOperationBusMasterWrite) {
- DmaOperation = MapOperationBusMasterWrite;
- } else if (Operation == EfiPciOperationBusMasterCommonBuffer) {
- DmaOperation = MapOperationBusMasterCommonBuffer;
- } else if (Operation == EfiPciOperationBusMasterRead64) {
- DmaOperation = MapOperationBusMasterRead;
- } else if (Operation == EfiPciOperationBusMasterWrite64) {
- DmaOperation = MapOperationBusMasterWrite;
- } else if (Operation == EfiPciOperationBusMasterCommonBuffer64) {
- DmaOperation = MapOperationBusMasterCommonBuffer;
- } else {
- return EFI_INVALID_PARAMETER;
- }
- (VOID)DmaMap (DmaOperation, HostAddress, NumberOfBytes, DeviceAddress, Mapping);
- return EFI_SUCCESS;
-}
-
-/**
- Completes the Map() operation and releases any corresponding resources.
-
- The Unmap() function completes the Map() operation and releases any corresponding resources.
- If the operation was an EfiPciOperationBusMasterWrite or
- EfiPciOperationBusMasterWrite64, the data is committed to the target system memory.
- Any resources used for the mapping are freed.
-
- @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL.
- @param[in] Mapping The mapping value returned from Map().
-
- @retval EFI_SUCCESS The range was unmapped.
- @retval EFI_INVALID_PARAMETER Mapping is not a value that was returned by Map().
- @retval EFI_DEVICE_ERROR The data was not committed to the target system memory.
-
-**/
-EFI_STATUS
-EFIAPI
-RootBridgeIoUnmap (
- IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This,
- IN VOID *Mapping
- )
-{
- return DmaUnmap (Mapping);
-}
-
-/**
- Allocates pages that are suitable for an EfiPciOperationBusMasterCommonBuffer or
- EfiPciOperationBusMasterCommonBuffer64 mapping.
-
- @param This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL.
- @param Type This parameter is not used and must be ignored.
- @param MemoryType The type of memory to allocate, EfiBootServicesData or EfiRuntimeServicesData.
- @param Pages The number of pages to allocate.
- @param HostAddress A pointer to store the base system memory address of the allocated range.
- @param Attributes The requested bit mask of attributes for the allocated range. Only
- the attributes EFI_PCI_ATTRIBUTE_MEMORY_WRITE_COMBINE, EFI_PCI_ATTRIBUTE_MEMORY_CACHED,
- and EFI_PCI_ATTRIBUTE_DUAL_ADDRESS_CYCLE may be used with this function.
-
- @retval EFI_SUCCESS The requested memory pages were allocated.
- @retval EFI_INVALID_PARAMETER MemoryType is invalid.
- @retval EFI_INVALID_PARAMETER HostAddress is NULL.
- @retval EFI_UNSUPPORTED Attributes is unsupported. The only legal attribute bits are
- MEMORY_WRITE_COMBINE, MEMORY_CACHED, and DUAL_ADDRESS_CYCLE.
- @retval EFI_OUT_OF_RESOURCES The memory pages could not be allocated.
-
-**/
-EFI_STATUS
-EFIAPI
-RootBridgeIoAllocateBuffer (
- IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This,
- IN EFI_ALLOCATE_TYPE Type,
- IN EFI_MEMORY_TYPE MemoryType,
- IN UINTN Pages,
- OUT VOID **HostAddress,
- IN UINT64 Attributes
- )
-{
- if (Attributes & EFI_PCI_ATTRIBUTE_INVALID_FOR_ALLOCATE_BUFFER) {
- return EFI_UNSUPPORTED;
- }
-
- return DmaAllocateBuffer (MemoryType, Pages, HostAddress);
-
-}
-
-/**
- Frees memory that was allocated with AllocateBuffer().
-
- The FreeBuffer() function frees memory that was allocated with AllocateBuffer().
-
- @param This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL.
- @param Pages The number of pages to free.
- @param HostAddress The base system memory address of the allocated range.
-
- @retval EFI_SUCCESS The requested memory pages were freed.
- @retval EFI_INVALID_PARAMETER The memory range specified by HostAddress and Pages
- was not allocated with AllocateBuffer().
-
-**/
-EFI_STATUS
-EFIAPI
-RootBridgeIoFreeBuffer (
- IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This,
- IN UINTN Pages,
- OUT VOID *HostAddress
- )
-{
- return DmaFreeBuffer (Pages, HostAddress);
-}
-
-/**
- Flushes all PCI posted write transactions from a PCI host bridge to system memory.
-
- The Flush() function flushes any PCI posted write transactions from a PCI host bridge to system
- memory. Posted write transactions are generated by PCI bus masters when they perform write
- transactions to target addresses in system memory.
- This function does not flush posted write transactions from any PCI bridges. A PCI controller
- specific action must be taken to guarantee that the posted write transactions have been flushed from
- the PCI controller and from all the PCI bridges into the PCI host bridge. This is typically done with
- a PCI read transaction from the PCI controller prior to calling Flush().
-
- @param This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL.
-
- @retval EFI_SUCCESS The PCI posted write transactions were flushed from the PCI host
- bridge to system memory.
- @retval EFI_DEVICE_ERROR The PCI posted write transactions were not flushed from the PCI
- host bridge due to a hardware error.
-
-**/
-EFI_STATUS
-EFIAPI
-RootBridgeIoFlush (
- IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This
- )
-{
- //
- // not supported yet
- //
- return EFI_SUCCESS;
-}
-
-/**
- Gets the attributes that a PCI root bridge supports setting with SetAttributes(), and the
- attributes that a PCI root bridge is currently using.
-
- The GetAttributes() function returns the mask of attributes that this PCI root bridge supports
- and the mask of attributes that the PCI root bridge is currently using.
-
- @param This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL.
- @param Supported A pointer to the mask of attributes that this PCI root bridge
- supports setting with SetAttributes().
- @param Attributes A pointer to the mask of attributes that this PCI root bridge is
- currently using.
-
- @retval EFI_SUCCESS If Supports is not NULL, then the attributes that the PCI root
- bridge supports is returned in Supports. If Attributes is
- not NULL, then the attributes that the PCI root bridge is currently
- using is returned in Attributes.
- @retval EFI_INVALID_PARAMETER Both Supports and Attributes are NULL.
-
-**/
-EFI_STATUS
-EFIAPI
-RootBridgeIoGetAttributes (
- IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This,
- OUT UINT64 *Supported,
- OUT UINT64 *Attributes
- )
-{
- PCI_ROOT_BRIDGE_INSTANCE *PrivateData;
-
- PrivateData = DRIVER_INSTANCE_FROM_PCI_ROOT_BRIDGE_IO_THIS(This);
-
- if (Attributes == NULL && Supported == NULL) {
- return EFI_INVALID_PARAMETER;
- }
-
- //
- // Set the return value for Supported and Attributes
- //
- if (Supported != NULL) {
- *Supported = PrivateData->Supports;
- }
-
- if (Attributes != NULL) {
- *Attributes = PrivateData->Attributes;
- }
-
- return EFI_SUCCESS;
-}
-
-/**
- Sets attributes for a resource range on a PCI root bridge.
-
- The SetAttributes() function sets the attributes specified in Attributes for the PCI root
- bridge on the resource range specified by ResourceBase and ResourceLength. Since the
- granularity of setting these attributes may vary from resource type to resource type, and from
- platform to platform, the actual resource range and the one passed in by the caller may differ. As a
- result, this function may set the attributes specified by Attributes on a larger resource range
- than the caller requested. The actual range is returned in ResourceBase and
- ResourceLength. The caller is responsible for verifying that the actual range for which the
- attributes were set is acceptable.
-
- @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL.
- @param[in] Attributes The mask of attributes to set. If the attribute bit
- MEMORY_WRITE_COMBINE, MEMORY_CACHED, or
- MEMORY_DISABLE is set, then the resource range is specified by
- ResourceBase and ResourceLength. If
- MEMORY_WRITE_COMBINE, MEMORY_CACHED, and
- MEMORY_DISABLE are not set, then ResourceBase and
- ResourceLength are ignored, and may be NULL.
- @param[in, out] ResourceBase A pointer to the base address of the resource range to be modified
- by the attributes specified by Attributes.
- @param[in, out] ResourceLength A pointer to the length of the resource range to be modified by the
- attributes specified by Attributes.
-
- @retval EFI_SUCCESS The current configuration of this PCI root bridge was returned in Resources.
- @retval EFI_UNSUPPORTED The current configuration of this PCI root bridge could not be retrieved.
- @retval EFI_INVALID_PARAMETER Invalid pointer of EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL
-
-**/
-EFI_STATUS
-EFIAPI
-RootBridgeIoSetAttributes (
- IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This,
- IN UINT64 Attributes,
- IN OUT UINT64 *ResourceBase,
- IN OUT UINT64 *ResourceLength
- )
-{
- PCI_ROOT_BRIDGE_INSTANCE *PrivateData;
-
- PrivateData = DRIVER_INSTANCE_FROM_PCI_ROOT_BRIDGE_IO_THIS(This);
-
- if (Attributes != 0) {
- if ((Attributes & (~(PrivateData->Supports))) != 0) {
- return EFI_UNSUPPORTED;
- }
- }
-
- //
- // This is a generic driver for a PC-AT class system. It does not have any
- // chipset specific knowlegde, so none of the attributes can be set or
- // cleared. Any attempt to set attribute that are already set will succeed,
- // and any attempt to set an attribute that is not supported will fail.
- //
- if (Attributes & (~PrivateData->Attributes)) {
- /* FIXME: */
- return EFI_UNSUPPORTED;
- }
-
- return EFI_SUCCESS;
-}
-
-/**
- Retrieves the current resource settings of this PCI root bridge in the form of a set of ACPI 2.0
- resource descriptors.
-
- There are only two resource descriptor types from the ACPI Specification that may be used to
- describe the current resources allocated to a PCI root bridge. These are the QWORD Address
- Space Descriptor (ACPI 2.0 Section 6.4.3.5.1), and the End Tag (ACPI 2.0 Section 6.4.2.8). The
- QWORD Address Space Descriptor can describe memory, I/O, and bus number ranges for dynamic
- or fixed resources. The configuration of a PCI root bridge is described with one or more QWORD
- Address Space Descriptors followed by an End Tag.
-
- @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL.
- @param[out] Resources A pointer to the ACPI 2.0 resource descriptors that describe the
- current configuration of this PCI root bridge. The storage for the
- ACPI 2.0 resource descriptors is allocated by this function. The
- caller must treat the return buffer as read-only data, and the buffer
- must not be freed by the caller.
-
- @retval EFI_SUCCESS The current configuration of this PCI root bridge was returned in Resources.
- @retval EFI_UNSUPPORTED The current configuration of this PCI root bridge could not be retrieved.
- @retval EFI_INVALID_PARAMETER Invalid pointer of EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL
-
-**/
-EFI_STATUS
-EFIAPI
-RootBridgeIoConfiguration (
- IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This,
- OUT VOID **Resources
- )
-{
- PCI_ROOT_BRIDGE_INSTANCE *PrivateData;
- UINTN Index;
-
- PrivateData = DRIVER_INSTANCE_FROM_PCI_ROOT_BRIDGE_IO_THIS (This);
- for (Index = 0; Index < TypeMax; Index++) {
- if (PrivateData->ResAllocNode[Index].Status == ResAllocated) {
- switch (Index) {
- case TypeIo:
- Configuration.SpaceDesp[Index].AddrRangeMin = PrivateData->IoBase;
- break;
- case TypeBus:
- Configuration.SpaceDesp[Index].AddrRangeMin = PrivateData->ResAllocNode[Index].Base;
- break;
- default:
- /* PCIE Device bar address should be base on PciRegionBase */
- Configuration.SpaceDesp[Index].AddrRangeMin = PrivateData->ResAllocNode[Index].Base - PrivateData->MemBase +
- PrivateData->PciRegionBase;
- }
- Configuration.SpaceDesp[Index].AddrRangeMax = Configuration.SpaceDesp[Index].AddrRangeMin + PrivateData->ResAllocNode[Index].Length - 1;
- Configuration.SpaceDesp[Index].AddrLen = PrivateData->ResAllocNode[Index].Length;
- Configuration.SpaceDesp[Index].AddrTranslationOffset = PrivateData->MemBase - PrivateData->PciRegionBase;
- }
- }
-
- *Resources = &Configuration;
- return EFI_SUCCESS;
-}
-
--
2.17.0
^ permalink raw reply related [flat|nested] 16+ messages in thread
* [PATCH edk2-platforms v1 13/13] Hisilicon/PlatformPciLib: clear redundant felds in RESOURCE_APPETURE
2018-07-20 8:02 [PATCH edk2-platforms v1 00/13] Switching to generic PciHostBridge driver Ming Huang
` (11 preceding siblings ...)
2018-07-20 8:02 ` [PATCH edk2-platforms v1 12/13] Hisilicon: remove platform specific PciHostBridge Ming Huang
@ 2018-07-20 8:02 ` Ming Huang
12 siblings, 0 replies; 16+ messages in thread
From: Ming Huang @ 2018-07-20 8:02 UTC (permalink / raw)
To: leif.lindholm, linaro-uefi, edk2-devel, graeme.gregory
Cc: ard.biesheuvel, guoheyi, wanghuiqiang, huangming23, zhangjinsong2,
huangdaode, john.garry, Heyi Guo, Yi Li, Michael D Kinney
From: Heyi Guo <heyi.guo@linaro.org>
In structure PCI_ROOT_BRIDGE_RESOURCE_APPETURE, MemBase is redundant
with CpuMemRegionBase, and MemLimit can be calculated by
CpuMemRegionBase + PciRegionLimit - PciRegionBase so it is also
redundant.
Remove these two fields to make things simple and clear.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Heyi Guo <heyi.guo@linaro.org>
Signed-off-by: Yi Li <phoenix.liyi@huawei.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
---
Platform/Hisilicon/D03/Library/PlatformPciLib/PlatformPciLib.c | 16 ----------
Platform/Hisilicon/D05/Library/PlatformPciLib/PlatformPciLib.c | 32 --------------------
Silicon/Hisilicon/Include/Library/PlatformPciLib.h | 2 --
3 files changed, 50 deletions(-)
diff --git a/Platform/Hisilicon/D03/Library/PlatformPciLib/PlatformPciLib.c b/Platform/Hisilicon/D03/Library/PlatformPciLib/PlatformPciLib.c
index 3a770d17bb..59c468ac4b 100644
--- a/Platform/Hisilicon/D03/Library/PlatformPciLib/PlatformPciLib.c
+++ b/Platform/Hisilicon/D03/Library/PlatformPciLib/PlatformPciLib.c
@@ -32,8 +32,6 @@ PCI_ROOT_BRIDGE_RESOURCE_APPETURE mResAppeture[PCIE_MAX_HOSTBRIDGE][PCIE_MAX_RO
PCI_HB0RB0_ECAM_BASE, //ecam
0, //BusBase
31, //BusLimit
- PCI_HB0RB0_PCIREGION_BASE, //Membase
- PCI_HB0RB0_PCIREGION_BASE + PCI_HB0RB0_PCIREGION_SIZE - 1, //Memlimit
PCI_HB0RB0_IO_BASE, //IoBase
(PCI_HB0RB0_CPUIOREGIONBASE + PCI_HB0RB0_IO_SIZE - 1), //IoLimit
PCI_HB0RB0_CPUMEMREGIONBASE, //CpuMemRegionBase
@@ -49,8 +47,6 @@ PCI_ROOT_BRIDGE_RESOURCE_APPETURE mResAppeture[PCIE_MAX_HOSTBRIDGE][PCIE_MAX_RO
PCI_HB0RB1_ECAM_BASE,//ecam
224, //BusBase
254, //BusLimit
- PCI_HB0RB1_PCIREGION_BASE, //Membase
- PCI_HB0RB1_PCIREGION_BASE + PCI_HB0RB1_PCIREGION_SIZE - 1, //MemLimit
(PCI_HB0RB1_IO_BASE), //IoBase
(PCI_HB0RB1_CPUIOREGIONBASE + PCI_HB0RB1_IO_SIZE - 1), //IoLimit
PCI_HB0RB1_CPUMEMREGIONBASE, //CpuMemRegionBase
@@ -65,8 +61,6 @@ PCI_ROOT_BRIDGE_RESOURCE_APPETURE mResAppeture[PCIE_MAX_HOSTBRIDGE][PCIE_MAX_RO
PCI_HB0RB2_ECAM_BASE,
128, //BusBase
159, //BusLimit
- PCI_HB0RB2_PCIREGION_BASE ,//MemBase
- PCI_HB0RB2_PCIREGION_BASE + PCI_HB0RB2_PCIREGION_SIZE - 1, //MemLimit
(PCI_HB0RB2_IO_BASE), //IOBase
(PCI_HB0RB2_CPUIOREGIONBASE + PCI_HB0RB2_IO_SIZE - 1), //IoLimit
PCI_HB0RB2_CPUMEMREGIONBASE, //CpuMemRegionBase
@@ -82,8 +76,6 @@ PCI_ROOT_BRIDGE_RESOURCE_APPETURE mResAppeture[PCIE_MAX_HOSTBRIDGE][PCIE_MAX_RO
PCI_HB0RB3_ECAM_BASE,
96, //BusBase
127, //BusLimit
- (PCI_HB0RB3_ECAM_BASE), //MemBase
- (PCI_HB0RB3_ECAM_BASE + PCI_HB0RB3_ECAM_SIZE - 1), //MemLimit
(0), //IoBase
(0), //IoLimit
0,
@@ -100,8 +92,6 @@ PCI_ROOT_BRIDGE_RESOURCE_APPETURE mResAppeture[PCIE_MAX_HOSTBRIDGE][PCIE_MAX_RO
PCI_HB1RB0_ECAM_BASE,
128, //BusBase
159, //BusLimit
- (PCI_HB1RB0_ECAM_BASE), //MemBase
- (PCI_HB1RB0_ECAM_BASE + PCI_HB1RB0_ECAM_SIZE - 1), //MemLimit
(0), //IoBase
(0), //IoLimit
0,
@@ -116,8 +106,6 @@ PCI_ROOT_BRIDGE_RESOURCE_APPETURE mResAppeture[PCIE_MAX_HOSTBRIDGE][PCIE_MAX_RO
PCI_HB1RB1_ECAM_BASE,
160, //BusBase
191, //BusLimit
- (PCI_HB1RB1_ECAM_BASE), //MemBase
- (PCI_HB1RB1_ECAM_BASE + PCI_HB1RB1_ECAM_SIZE - 1), //MemLimit
(0), //IoBase
(0), //IoLimit
0,
@@ -132,8 +120,6 @@ PCI_ROOT_BRIDGE_RESOURCE_APPETURE mResAppeture[PCIE_MAX_HOSTBRIDGE][PCIE_MAX_RO
PCI_HB1RB2_ECAM_BASE,
192, //BusBase
223, //BusLimit
- (PCI_HB1RB2_ECAM_BASE), //MemBase
- (PCI_HB1RB2_ECAM_BASE + PCI_HB1RB2_ECAM_SIZE - 1), //MemLimit
(0), //IoBase
(0), //IoLimit
0,
@@ -149,8 +135,6 @@ PCI_ROOT_BRIDGE_RESOURCE_APPETURE mResAppeture[PCIE_MAX_HOSTBRIDGE][PCIE_MAX_RO
PCI_HB1RB3_ECAM_BASE,
224, //BusBase
255, //BusLimit
- (PCI_HB1RB3_ECAM_BASE), //MemBase
- (PCI_HB1RB3_ECAM_BASE + PCI_HB1RB3_ECAM_SIZE - 1), //MemLimit
(0), //IoBase
(0), //IoLimit
0,
diff --git a/Platform/Hisilicon/D05/Library/PlatformPciLib/PlatformPciLib.c b/Platform/Hisilicon/D05/Library/PlatformPciLib/PlatformPciLib.c
index 42bbdd8c98..0dc988a1d3 100644
--- a/Platform/Hisilicon/D05/Library/PlatformPciLib/PlatformPciLib.c
+++ b/Platform/Hisilicon/D05/Library/PlatformPciLib/PlatformPciLib.c
@@ -33,8 +33,6 @@ PCI_ROOT_BRIDGE_RESOURCE_APPETURE mResAppeture[PCIE_MAX_HOSTBRIDGE][PCIE_MAX_RO
PCI_HB0RB0_ECAM_BASE, //ecam
0x80, //BusBase
0x87, //BusLimit
- PCI_HB0RB0_PCIREGION_BASE, //Membase
- PCI_HB0RB0_CPUMEMREGIONBASE + PCI_HB0RB0_PCIREGION_SIZE - 1, //Memlimit
PCI_HB0RB0_IO_BASE, //IoBase
(PCI_HB0RB0_CPUIOREGIONBASE + PCI_HB0RB0_IO_SIZE - 1), //IoLimit
PCI_HB0RB0_CPUMEMREGIONBASE, //CpuMemRegionBase
@@ -49,8 +47,6 @@ PCI_ROOT_BRIDGE_RESOURCE_APPETURE mResAppeture[PCIE_MAX_HOSTBRIDGE][PCIE_MAX_RO
PCI_HB0RB1_ECAM_BASE,//ecam
0x90, //BusBase
0x97, //BusLimit
- PCI_HB0RB1_PCIREGION_BASE, //Membase
- PCI_HB0RB1_CPUMEMREGIONBASE + PCI_HB0RB1_PCIREGION_SIZE - 1, //MemLimit
(PCI_HB0RB1_IO_BASE), //IoBase
(PCI_HB0RB1_CPUIOREGIONBASE + PCI_HB0RB1_IO_SIZE - 1), //IoLimit
PCI_HB0RB1_CPUMEMREGIONBASE, //CpuMemRegionBase
@@ -65,8 +61,6 @@ PCI_ROOT_BRIDGE_RESOURCE_APPETURE mResAppeture[PCIE_MAX_HOSTBRIDGE][PCIE_MAX_RO
PCI_HB0RB2_ECAM_BASE,
0xF8, //BusBase
0xFF, //BusLimit
- PCI_HB0RB2_CPUMEMREGIONBASE ,//MemBase
- PCI_HB0RB2_CPUMEMREGIONBASE + PCI_HB0RB2_PCIREGION_SIZE - 1, //MemLimit
(PCI_HB0RB2_IO_BASE), //IOBase
(PCI_HB0RB2_CPUIOREGIONBASE + PCI_HB0RB2_IO_SIZE - 1), //IoLimit
PCI_HB0RB2_CPUMEMREGIONBASE, //CpuMemRegionBase
@@ -82,8 +76,6 @@ PCI_ROOT_BRIDGE_RESOURCE_APPETURE mResAppeture[PCIE_MAX_HOSTBRIDGE][PCIE_MAX_RO
PCI_HB0RB3_ECAM_BASE,
0xb0, //BusBase
0xb7, //BusLimit
- (PCI_HB0RB3_ECAM_BASE), //MemBase
- (PCI_HB0RB3_CPUMEMREGIONBASE + PCI_HB0RB3_PCIREGION_SIZE - 1), //MemLimit
(PCI_HB0RB3_IO_BASE), //IoBase
(PCI_HB0RB3_CPUIOREGIONBASE + PCI_HB0RB3_IO_SIZE - 1), //IoLimit
PCI_HB0RB3_CPUMEMREGIONBASE,
@@ -98,8 +90,6 @@ PCI_ROOT_BRIDGE_RESOURCE_APPETURE mResAppeture[PCIE_MAX_HOSTBRIDGE][PCIE_MAX_RO
PCI_HB0RB4_ECAM_BASE, //ecam
0x88, //BusBase
0x8f, //BusLimit
- PCI_HB0RB4_CPUMEMREGIONBASE, //Membase
- PCI_HB0RB4_CPUMEMREGIONBASE + PCI_HB0RB4_PCIREGION_SIZE - 1, //Memlimit
PCI_HB0RB4_IO_BASE, //IoBase
(PCI_HB0RB4_CPUIOREGIONBASE + PCI_HB0RB4_IO_SIZE - 1), //IoLimit
PCI_HB0RB4_CPUMEMREGIONBASE, //CpuMemRegionBase
@@ -114,8 +104,6 @@ PCI_ROOT_BRIDGE_RESOURCE_APPETURE mResAppeture[PCIE_MAX_HOSTBRIDGE][PCIE_MAX_RO
PCI_HB0RB5_ECAM_BASE,//ecam
0x78, //BusBase
0x7F, //BusLimit
- PCI_HB0RB5_CPUMEMREGIONBASE, //Membase
- PCI_HB0RB5_CPUMEMREGIONBASE + PCI_HB0RB5_PCIREGION_SIZE - 1, //MemLimit
(PCI_HB0RB5_IO_BASE), //IoBase
(PCI_HB0RB5_CPUIOREGIONBASE + PCI_HB0RB5_IO_SIZE - 1), //IoLimit
PCI_HB0RB5_CPUMEMREGIONBASE, //CpuMemRegionBase
@@ -130,8 +118,6 @@ PCI_ROOT_BRIDGE_RESOURCE_APPETURE mResAppeture[PCIE_MAX_HOSTBRIDGE][PCIE_MAX_RO
PCI_HB0RB6_ECAM_BASE,
0xC0, //BusBase
0xC7, //BusLimit
- PCI_HB0RB6_PCIREGION_BASE ,//MemBase
- PCI_HB0RB6_CPUMEMREGIONBASE + PCI_HB0RB6_PCIREGION_SIZE - 1, //MemLimit
(PCI_HB0RB6_IO_BASE), //IOBase
(PCI_HB0RB6_CPUIOREGIONBASE + PCI_HB0RB6_IO_SIZE - 1), //IoLimit
PCI_HB0RB6_CPUMEMREGIONBASE, //CpuMemRegionBase
@@ -147,8 +133,6 @@ PCI_ROOT_BRIDGE_RESOURCE_APPETURE mResAppeture[PCIE_MAX_HOSTBRIDGE][PCIE_MAX_RO
PCI_HB0RB7_ECAM_BASE,
0x90, //BusBase
0x97, //BusLimit
- PCI_HB0RB7_CPUMEMREGIONBASE, //MemBase
- PCI_HB0RB7_CPUMEMREGIONBASE + PCI_HB0RB7_PCIREGION_SIZE - 1, //MemLimit
(PCI_HB0RB7_IO_BASE), //IoBase
(PCI_HB0RB7_CPUIOREGIONBASE + PCI_HB0RB7_IO_SIZE - 1), //IoLimit
PCI_HB0RB7_CPUMEMREGIONBASE,
@@ -165,8 +149,6 @@ PCI_ROOT_BRIDGE_RESOURCE_APPETURE mResAppeture[PCIE_MAX_HOSTBRIDGE][PCIE_MAX_RO
PCI_HB1RB0_ECAM_BASE,
0x80, //BusBase
0x87, //BusLimit
- (PCI_HB1RB0_ECAM_BASE), //MemBase
- (PCI_HB1RB0_CPUMEMREGIONBASE + PCI_HB1RB0_PCIREGION_SIZE - 1), //MemLimit
PCI_HB1RB0_IO_BASE, //IoBase
(PCI_HB1RB0_CPUIOREGIONBASE + PCI_HB1RB0_IO_SIZE - 1), //IoLimit
PCI_HB1RB0_CPUMEMREGIONBASE, //CpuMemRegionBase
@@ -181,8 +163,6 @@ PCI_ROOT_BRIDGE_RESOURCE_APPETURE mResAppeture[PCIE_MAX_HOSTBRIDGE][PCIE_MAX_RO
PCI_HB1RB1_ECAM_BASE,
0x90, //BusBase
0x97, //BusLimit
- (PCI_HB1RB1_ECAM_BASE), //MemBase
- (PCI_HB1RB1_CPUMEMREGIONBASE + PCI_HB1RB1_PCIREGION_SIZE - 1), //MemLimit
PCI_HB1RB1_IO_BASE, //IoBase
(PCI_HB1RB1_CPUIOREGIONBASE + PCI_HB1RB1_IO_SIZE - 1), //IoLimit
PCI_HB1RB1_CPUMEMREGIONBASE, //CpuMemRegionBase
@@ -197,8 +177,6 @@ PCI_ROOT_BRIDGE_RESOURCE_APPETURE mResAppeture[PCIE_MAX_HOSTBRIDGE][PCIE_MAX_RO
PCI_HB1RB2_ECAM_BASE,
0x10, //BusBase
0x1f, //BusLimit
- PCI_HB1RB2_CPUMEMREGIONBASE, //MemBase
- PCI_HB1RB2_CPUMEMREGIONBASE + PCI_HB1RB2_PCIREGION_SIZE - 1, //MemLimit
PCI_HB1RB2_IO_BASE, //IoBase
(PCI_HB1RB2_CPUIOREGIONBASE + PCI_HB1RB2_IO_SIZE - 1), //IoLimit
PCI_HB1RB2_CPUMEMREGIONBASE, //CpuMemRegionBase
@@ -214,8 +192,6 @@ PCI_ROOT_BRIDGE_RESOURCE_APPETURE mResAppeture[PCIE_MAX_HOSTBRIDGE][PCIE_MAX_RO
PCI_HB1RB3_ECAM_BASE,
0xb0, //BusBase
0xb7, //BusLimit
- (PCI_HB1RB3_ECAM_BASE), //MemBase
- (PCI_HB1RB3_CPUMEMREGIONBASE + PCI_HB1RB3_PCIREGION_SIZE - 1), //MemLimit
PCI_HB1RB3_IO_BASE, //IoBase
(PCI_HB1RB3_CPUIOREGIONBASE + PCI_HB1RB3_IO_SIZE - 1), //IoLimit
PCI_HB1RB3_CPUMEMREGIONBASE, //CpuMemRegionBase
@@ -230,8 +206,6 @@ PCI_ROOT_BRIDGE_RESOURCE_APPETURE mResAppeture[PCIE_MAX_HOSTBRIDGE][PCIE_MAX_RO
PCI_HB1RB4_ECAM_BASE,
0x20, //BusBase
0x2f, //BusLimit
- PCI_HB1RB4_CPUMEMREGIONBASE, //MemBase
- PCI_HB1RB4_CPUMEMREGIONBASE + PCI_HB1RB4_PCIREGION_SIZE - 1, //MemLimit
PCI_HB1RB4_IO_BASE, //IoBase
(PCI_HB1RB4_CPUIOREGIONBASE + PCI_HB1RB4_IO_SIZE - 1), //IoLimit
PCI_HB1RB4_CPUMEMREGIONBASE, //CpuMemRegionBase
@@ -246,8 +220,6 @@ PCI_ROOT_BRIDGE_RESOURCE_APPETURE mResAppeture[PCIE_MAX_HOSTBRIDGE][PCIE_MAX_RO
PCI_HB1RB5_ECAM_BASE,
0x30, //BusBase
0x3f, //BusLimit
- PCI_HB1RB5_CPUMEMREGIONBASE, //MemBase
- PCI_HB1RB5_CPUMEMREGIONBASE + PCI_HB1RB5_PCIREGION_SIZE - 1, //MemLimit
PCI_HB1RB5_IO_BASE, //IoBase
(PCI_HB1RB5_CPUIOREGIONBASE + PCI_HB1RB5_IO_SIZE - 1), //IoLimit
PCI_HB1RB5_CPUMEMREGIONBASE, //CpuMemRegionBase
@@ -262,8 +234,6 @@ PCI_ROOT_BRIDGE_RESOURCE_APPETURE mResAppeture[PCIE_MAX_HOSTBRIDGE][PCIE_MAX_RO
PCI_HB1RB6_ECAM_BASE,
0xa8, //BusBase
0xaf, //BusLimit
- (PCI_HB1RB6_ECAM_BASE), //MemBase
- PCI_HB1RB6_CPUMEMREGIONBASE + PCI_HB1RB6_PCIREGION_SIZE - 1, //MemLimit
PCI_HB1RB6_IO_BASE, //IoBase
(PCI_HB1RB6_CPUIOREGIONBASE + PCI_HB1RB6_IO_SIZE - 1), //IoLimit
PCI_HB1RB6_CPUMEMREGIONBASE, //CpuMemRegionBase
@@ -279,8 +249,6 @@ PCI_ROOT_BRIDGE_RESOURCE_APPETURE mResAppeture[PCIE_MAX_HOSTBRIDGE][PCIE_MAX_RO
PCI_HB1RB7_ECAM_BASE,
0xb8, //BusBase
0xbf, //BusLimit
- (PCI_HB1RB7_ECAM_BASE), //MemBase
- PCI_HB1RB7_CPUMEMREGIONBASE + PCI_HB1RB7_PCIREGION_SIZE - 1, //MemLimit
PCI_HB1RB7_IO_BASE, //IoBase
(PCI_HB1RB7_CPUIOREGIONBASE + PCI_HB1RB7_IO_SIZE - 1), //IoLimit
PCI_HB1RB7_CPUMEMREGIONBASE, //CpuMemRegionBase
diff --git a/Silicon/Hisilicon/Include/Library/PlatformPciLib.h b/Silicon/Hisilicon/Include/Library/PlatformPciLib.h
index 6725a547d5..5fdc3d3e0a 100644
--- a/Silicon/Hisilicon/Include/Library/PlatformPciLib.h
+++ b/Silicon/Hisilicon/Include/Library/PlatformPciLib.h
@@ -194,8 +194,6 @@ typedef struct {
UINT64 Ecam;
UINT64 BusBase;
UINT64 BusLimit;
- UINT64 MemBase;
- UINT64 MemLimit;
UINT64 IoBase;
UINT64 IoLimit;
UINT64 CpuMemRegionBase;
--
2.17.0
^ permalink raw reply related [flat|nested] 16+ messages in thread
* Re: [PATCH edk2-platforms v1 09/13] Hisilicon: add PciCpuIo2Dxe
2018-07-20 8:02 ` [PATCH edk2-platforms v1 09/13] Hisilicon: add PciCpuIo2Dxe Ming Huang
@ 2018-07-20 10:31 ` Ard Biesheuvel
2018-07-23 1:12 ` Ming
0 siblings, 1 reply; 16+ messages in thread
From: Ard Biesheuvel @ 2018-07-20 10:31 UTC (permalink / raw)
To: Ming Huang
Cc: Leif Lindholm, linaro-uefi, edk2-devel@lists.01.org,
Graeme Gregory, guoheyi, wanghuiqiang, huangming, Jason Zhang,
huangdaode, John Garry, Heyi Guo, Michael D Kinney
(reply to correct version of the patch - apologies for the spam if you
got this twice)
On 20 July 2018 at 17:02, Ming Huang <ming.huang@linaro.org> wrote:
> From: Heyi Guo <heyi.guo@linaro.org>
>
> This is to prepare for switching to generic PciHostBridge, and
> CpuIo2Dxe is needed by generic PciHostBridge driver.
>
> The driver is copied from ArmPkg/Drivers/ArmPciCpuIo2Dxe and changed
> for D0x.
>
> Contributed-under: TianoCore Contribution Agreement 1.1
> Signed-off-by: Heyi Guo <heyi.guo@linaro.org>
> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
> Cc: Leif Lindholm <leif.lindholm@linaro.org>
> Cc: Michael D Kinney <michael.d.kinney@intel.com>
Why do you need this driver? Can you not simply set
gArmTokenSpaceGuid.PcdPciIoTranslation to 0x0 and use
ArmPkg/Drivers/ArmPciCpuIo2Dxe/ArmPciCpuIo2Dxe.inf instead?
> ---
> Silicon/Hisilicon/Drivers/ArmPciCpuIo2Dxe/ArmPciCpuIo2Dxe.c | 557 ++++++++++++++++++++
> Silicon/Hisilicon/Drivers/ArmPciCpuIo2Dxe/ArmPciCpuIo2Dxe.inf | 48 ++
> 2 files changed, 605 insertions(+)
>
> diff --git a/Silicon/Hisilicon/Drivers/ArmPciCpuIo2Dxe/ArmPciCpuIo2Dxe.c b/Silicon/Hisilicon/Drivers/ArmPciCpuIo2Dxe/ArmPciCpuIo2Dxe.c
> new file mode 100644
> index 0000000000..8426c5935c
> --- /dev/null
> +++ b/Silicon/Hisilicon/Drivers/ArmPciCpuIo2Dxe/ArmPciCpuIo2Dxe.c
> @@ -0,0 +1,557 @@
> +/** @file
> + Produces the CPU I/O 2 Protocol.
> +
> +Copyright (c) 2009 - 2012, Intel Corporation. All rights reserved.<BR>
> +Copyright (c) 2016 - 2018, Linaro Ltd. All rights reserved.<BR>
> +Copyright (c) 2018, Hisilicon Ltd. All rights reserved.<BR>
> +
> +This program and the accompanying materials
> +are licensed and made available under the terms and conditions of the BSD License
> +which accompanies this distribution. The full text of the license may be found at
> +http://opensource.org/licenses/bsd-license.php
> +
> +THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> +WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
> +
> +**/
> +
> +#include <PiDxe.h>
> +
> +#include <Protocol/CpuIo2.h>
> +
> +#include <Library/BaseLib.h>
> +#include <Library/DebugLib.h>
> +#include <Library/IoLib.h>
> +#include <Library/PcdLib.h>
> +#include <Library/UefiBootServicesTableLib.h>
> +
> +// The translated IO PORT address is already a MMIO address, so we make it the
> +// same as memory address for range check.
> +#define MAX_IO_PORT_ADDRESS MAX_ADDRESS
> +
> +//
> +// Lookup table for increment values based on transfer widths
> +//
> +STATIC CONST UINT8 mInStride[] = {
> + 1, // EfiCpuIoWidthUint8
> + 2, // EfiCpuIoWidthUint16
> + 4, // EfiCpuIoWidthUint32
> + 8, // EfiCpuIoWidthUint64
> + 0, // EfiCpuIoWidthFifoUint8
> + 0, // EfiCpuIoWidthFifoUint16
> + 0, // EfiCpuIoWidthFifoUint32
> + 0, // EfiCpuIoWidthFifoUint64
> + 1, // EfiCpuIoWidthFillUint8
> + 2, // EfiCpuIoWidthFillUint16
> + 4, // EfiCpuIoWidthFillUint32
> + 8 // EfiCpuIoWidthFillUint64
> +};
> +
> +//
> +// Lookup table for increment values based on transfer widths
> +//
> +STATIC CONST UINT8 mOutStride[] = {
> + 1, // EfiCpuIoWidthUint8
> + 2, // EfiCpuIoWidthUint16
> + 4, // EfiCpuIoWidthUint32
> + 8, // EfiCpuIoWidthUint64
> + 1, // EfiCpuIoWidthFifoUint8
> + 2, // EfiCpuIoWidthFifoUint16
> + 4, // EfiCpuIoWidthFifoUint32
> + 8, // EfiCpuIoWidthFifoUint64
> + 0, // EfiCpuIoWidthFillUint8
> + 0, // EfiCpuIoWidthFillUint16
> + 0, // EfiCpuIoWidthFillUint32
> + 0 // EfiCpuIoWidthFillUint64
> +};
> +
> +/**
> + Check parameters to a CPU I/O 2 Protocol service request.
> +
> + The I/O operations are carried out exactly as requested. The caller is responsible
> + for satisfying any alignment and I/O width restrictions that a PI System on a
> + platform might require. For example on some platforms, width requests of
> + EfiCpuIoWidthUint64 do not work. Misaligned buffers, on the other hand, will
> + be handled by the driver.
> +
> + @param[in] MmioOperation TRUE for an MMIO operation, FALSE for I/O Port operation.
> + @param[in] Width Signifies the width of the I/O or Memory operation.
> + @param[in] Address The base address of the I/O operation.
> + @param[in] Count The number of I/O operations to perform. The number of
> + bytes moved is Width size * Count, starting at Address.
> + @param[in] Buffer For read operations, the destination buffer to store the results.
> + For write operations, the source buffer from which to write data.
> +
> + @retval EFI_SUCCESS The parameters for this request pass the checks.
> + @retval EFI_INVALID_PARAMETER Width is invalid for this PI system.
> + @retval EFI_INVALID_PARAMETER Buffer is NULL.
> + @retval EFI_UNSUPPORTED The Buffer is not aligned for the given Width.
> + @retval EFI_UNSUPPORTED The address range specified by Address, Width,
> + and Count is not valid for this PI system.
> +
> +**/
> +STATIC
> +EFI_STATUS
> +CpuIoCheckParameter (
> + IN BOOLEAN MmioOperation,
> + IN EFI_CPU_IO_PROTOCOL_WIDTH Width,
> + IN UINT64 Address,
> + IN UINTN Count,
> + IN VOID *Buffer
> + )
> +{
> + UINT64 MaxCount;
> + UINT64 Limit;
> +
> + //
> + // Check to see if Buffer is NULL
> + //
> + if (Buffer == NULL) {
> + return EFI_INVALID_PARAMETER;
> + }
> +
> + //
> + // Check to see if Width is in the valid range
> + //
> + if ((UINT32)Width >= EfiCpuIoWidthMaximum) {
> + return EFI_INVALID_PARAMETER;
> + }
> +
> + //
> + // For FIFO type, the target address won't increase during the access,
> + // so treat Count as 1
> + //
> + if (Width >= EfiCpuIoWidthFifoUint8 && Width <= EfiCpuIoWidthFifoUint64) {
> + Count = 1;
> + }
> +
> + //
> + // Check to see if Width is in the valid range for I/O Port operations
> + //
> + Width = (EFI_CPU_IO_PROTOCOL_WIDTH) (Width & 0x03);
> + if (!MmioOperation && (Width == EfiCpuIoWidthUint64)) {
> + return EFI_INVALID_PARAMETER;
> + }
> +
> + //
> + // Check to see if Address is aligned
> + //
> + if ((Address & (UINT64)(mInStride[Width] - 1)) != 0) {
> + return EFI_UNSUPPORTED;
> + }
> +
> + //
> + // Check to see if any address associated with this transfer exceeds the maximum
> + // allowed address. The maximum address implied by the parameters passed in is
> + // Address + Size * Count. If the following condition is met, then the transfer
> + // is not supported.
> + //
> + // Address + Size * Count > (MmioOperation ? MAX_ADDRESS : MAX_IO_PORT_ADDRESS) + 1
> + //
> + // Since MAX_ADDRESS can be the maximum integer value supported by the CPU and Count
> + // can also be the maximum integer value supported by the CPU, this range
> + // check must be adjusted to avoid all oveflow conditions.
> + //
> + // The following form of the range check is equivalent but assumes that
> + // MAX_ADDRESS and MAX_IO_PORT_ADDRESS are of the form (2^n - 1).
> + //
> + Limit = (MmioOperation ? MAX_ADDRESS : MAX_IO_PORT_ADDRESS);
> + if (Count == 0) {
> + if (Address > Limit) {
> + return EFI_UNSUPPORTED;
> + }
> + } else {
> + MaxCount = RShiftU64 (Limit, Width);
> + if (MaxCount < (Count - 1)) {
> + return EFI_UNSUPPORTED;
> + }
> + if (Address > LShiftU64 (MaxCount - Count + 1, Width)) {
> + return EFI_UNSUPPORTED;
> + }
> + }
> +
> + //
> + // Check to see if Buffer is aligned
> + //
> + if (((UINTN)Buffer & ((MIN (sizeof (UINTN), mInStride[Width]) - 1))) != 0) {
> + return EFI_UNSUPPORTED;
> + }
> +
> + return EFI_SUCCESS;
> +}
> +
> +/**
> + Reads memory-mapped registers.
> +
> + The I/O operations are carried out exactly as requested. The caller is responsible
> + for satisfying any alignment and I/O width restrictions that a PI System on a
> + platform might require. For example on some platforms, width requests of
> + EfiCpuIoWidthUint64 do not work. Misaligned buffers, on the other hand, will
> + be handled by the driver.
> +
> + If Width is EfiCpuIoWidthUint8, EfiCpuIoWidthUint16, EfiCpuIoWidthUint32,
> + or EfiCpuIoWidthUint64, then both Address and Buffer are incremented for
> + each of the Count operations that is performed.
> +
> + If Width is EfiCpuIoWidthFifoUint8, EfiCpuIoWidthFifoUint16,
> + EfiCpuIoWidthFifoUint32, or EfiCpuIoWidthFifoUint64, then only Buffer is
> + incremented for each of the Count operations that is performed. The read or
> + write operation is performed Count times on the same Address.
> +
> + If Width is EfiCpuIoWidthFillUint8, EfiCpuIoWidthFillUint16,
> + EfiCpuIoWidthFillUint32, or EfiCpuIoWidthFillUint64, then only Address is
> + incremented for each of the Count operations that is performed. The read or
> + write operation is performed Count times from the first element of Buffer.
> +
> + @param[in] This A pointer to the EFI_CPU_IO2_PROTOCOL instance.
> + @param[in] Width Signifies the width of the I/O or Memory operation.
> + @param[in] Address The base address of the I/O operation.
> + @param[in] Count The number of I/O operations to perform. The number of
> + bytes moved is Width size * Count, starting at Address.
> + @param[out] Buffer For read operations, the destination buffer to store the results.
> + For write operations, the source buffer from which to write data.
> +
> + @retval EFI_SUCCESS The data was read from or written to the PI system.
> + @retval EFI_INVALID_PARAMETER Width is invalid for this PI system.
> + @retval EFI_INVALID_PARAMETER Buffer is NULL.
> + @retval EFI_UNSUPPORTED The Buffer is not aligned for the given Width.
> + @retval EFI_UNSUPPORTED The address range specified by Address, Width,
> + and Count is not valid for this PI system.
> +
> +**/
> +STATIC
> +EFI_STATUS
> +EFIAPI
> +CpuMemoryServiceRead (
> + IN EFI_CPU_IO2_PROTOCOL *This,
> + IN EFI_CPU_IO_PROTOCOL_WIDTH Width,
> + IN UINT64 Address,
> + IN UINTN Count,
> + OUT VOID *Buffer
> + )
> +{
> + EFI_STATUS Status;
> + UINT8 InStride;
> + UINT8 OutStride;
> + EFI_CPU_IO_PROTOCOL_WIDTH OperationWidth;
> + UINT8 *Uint8Buffer;
> +
> + Status = CpuIoCheckParameter (TRUE, Width, Address, Count, Buffer);
> + if (EFI_ERROR (Status)) {
> + return Status;
> + }
> +
> + //
> + // Select loop based on the width of the transfer
> + //
> + InStride = mInStride[Width];
> + OutStride = mOutStride[Width];
> + OperationWidth = (EFI_CPU_IO_PROTOCOL_WIDTH) (Width & 0x03);
> + for (Uint8Buffer = Buffer; Count > 0; Address += InStride, Uint8Buffer += OutStride, Count--) {
> + if (OperationWidth == EfiCpuIoWidthUint8) {
> + *Uint8Buffer = MmioRead8 ((UINTN)Address);
> + } else if (OperationWidth == EfiCpuIoWidthUint16) {
> + *((UINT16 *)Uint8Buffer) = MmioRead16 ((UINTN)Address);
> + } else if (OperationWidth == EfiCpuIoWidthUint32) {
> + *((UINT32 *)Uint8Buffer) = MmioRead32 ((UINTN)Address);
> + } else if (OperationWidth == EfiCpuIoWidthUint64) {
> + *((UINT64 *)Uint8Buffer) = MmioRead64 ((UINTN)Address);
> + }
> + }
> + return EFI_SUCCESS;
> +}
> +
> +/**
> + Writes memory-mapped registers.
> +
> + The I/O operations are carried out exactly as requested. The caller is responsible
> + for satisfying any alignment and I/O width restrictions that a PI System on a
> + platform might require. For example on some platforms, width requests of
> + EfiCpuIoWidthUint64 do not work. Misaligned buffers, on the other hand, will
> + be handled by the driver.
> +
> + If Width is EfiCpuIoWidthUint8, EfiCpuIoWidthUint16, EfiCpuIoWidthUint32,
> + or EfiCpuIoWidthUint64, then both Address and Buffer are incremented for
> + each of the Count operations that is performed.
> +
> + If Width is EfiCpuIoWidthFifoUint8, EfiCpuIoWidthFifoUint16,
> + EfiCpuIoWidthFifoUint32, or EfiCpuIoWidthFifoUint64, then only Buffer is
> + incremented for each of the Count operations that is performed. The read or
> + write operation is performed Count times on the same Address.
> +
> + If Width is EfiCpuIoWidthFillUint8, EfiCpuIoWidthFillUint16,
> + EfiCpuIoWidthFillUint32, or EfiCpuIoWidthFillUint64, then only Address is
> + incremented for each of the Count operations that is performed. The read or
> + write operation is performed Count times from the first element of Buffer.
> +
> + @param[in] This A pointer to the EFI_CPU_IO2_PROTOCOL instance.
> + @param[in] Width Signifies the width of the I/O or Memory operation.
> + @param[in] Address The base address of the I/O operation.
> + @param[in] Count The number of I/O operations to perform. The number of
> + bytes moved is Width size * Count, starting at Address.
> + @param[in] Buffer For read operations, the destination buffer to store the results.
> + For write operations, the source buffer from which to write data.
> +
> + @retval EFI_SUCCESS The data was read from or written to the PI system.
> + @retval EFI_INVALID_PARAMETER Width is invalid for this PI system.
> + @retval EFI_INVALID_PARAMETER Buffer is NULL.
> + @retval EFI_UNSUPPORTED The Buffer is not aligned for the given Width.
> + @retval EFI_UNSUPPORTED The address range specified by Address, Width,
> + and Count is not valid for this PI system.
> +
> +**/
> +STATIC
> +EFI_STATUS
> +EFIAPI
> +CpuMemoryServiceWrite (
> + IN EFI_CPU_IO2_PROTOCOL *This,
> + IN EFI_CPU_IO_PROTOCOL_WIDTH Width,
> + IN UINT64 Address,
> + IN UINTN Count,
> + IN VOID *Buffer
> + )
> +{
> + EFI_STATUS Status;
> + UINT8 InStride;
> + UINT8 OutStride;
> + EFI_CPU_IO_PROTOCOL_WIDTH OperationWidth;
> + UINT8 *Uint8Buffer;
> +
> + Status = CpuIoCheckParameter (TRUE, Width, Address, Count, Buffer);
> + if (EFI_ERROR (Status)) {
> + return Status;
> + }
> +
> + //
> + // Select loop based on the width of the transfer
> + //
> + InStride = mInStride[Width];
> + OutStride = mOutStride[Width];
> + OperationWidth = (EFI_CPU_IO_PROTOCOL_WIDTH) (Width & 0x03);
> + for (Uint8Buffer = Buffer; Count > 0; Address += InStride, Uint8Buffer += OutStride, Count--) {
> + if (OperationWidth == EfiCpuIoWidthUint8) {
> + MmioWrite8 ((UINTN)Address, *Uint8Buffer);
> + } else if (OperationWidth == EfiCpuIoWidthUint16) {
> + MmioWrite16 ((UINTN)Address, *((UINT16 *)Uint8Buffer));
> + } else if (OperationWidth == EfiCpuIoWidthUint32) {
> + MmioWrite32 ((UINTN)Address, *((UINT32 *)Uint8Buffer));
> + } else if (OperationWidth == EfiCpuIoWidthUint64) {
> + MmioWrite64 ((UINTN)Address, *((UINT64 *)Uint8Buffer));
> + }
> + }
> + return EFI_SUCCESS;
> +}
> +
> +/**
> + Reads I/O registers.
> +
> + The I/O operations are carried out exactly as requested. The caller is responsible
> + for satisfying any alignment and I/O width restrictions that a PI System on a
> + platform might require. For example on some platforms, width requests of
> + EfiCpuIoWidthUint64 do not work. Misaligned buffers, on the other hand, will
> + be handled by the driver.
> +
> + If Width is EfiCpuIoWidthUint8, EfiCpuIoWidthUint16, EfiCpuIoWidthUint32,
> + or EfiCpuIoWidthUint64, then both Address and Buffer are incremented for
> + each of the Count operations that is performed.
> +
> + If Width is EfiCpuIoWidthFifoUint8, EfiCpuIoWidthFifoUint16,
> + EfiCpuIoWidthFifoUint32, or EfiCpuIoWidthFifoUint64, then only Buffer is
> + incremented for each of the Count operations that is performed. The read or
> + write operation is performed Count times on the same Address.
> +
> + If Width is EfiCpuIoWidthFillUint8, EfiCpuIoWidthFillUint16,
> + EfiCpuIoWidthFillUint32, or EfiCpuIoWidthFillUint64, then only Address is
> + incremented for each of the Count operations that is performed. The read or
> + write operation is performed Count times from the first element of Buffer.
> +
> + @param[in] This A pointer to the EFI_CPU_IO2_PROTOCOL instance.
> + @param[in] Width Signifies the width of the I/O or Memory operation.
> + @param[in] Address The base address of the I/O operation.
> + @param[in] Count The number of I/O operations to perform. The number of
> + bytes moved is Width size * Count, starting at Address.
> + @param[out] Buffer For read operations, the destination buffer to store the results.
> + For write operations, the source buffer from which to write data.
> +
> + @retval EFI_SUCCESS The data was read from or written to the PI system.
> + @retval EFI_INVALID_PARAMETER Width is invalid for this PI system.
> + @retval EFI_INVALID_PARAMETER Buffer is NULL.
> + @retval EFI_UNSUPPORTED The Buffer is not aligned for the given Width.
> + @retval EFI_UNSUPPORTED The address range specified by Address, Width,
> + and Count is not valid for this PI system.
> +
> +**/
> +STATIC
> +EFI_STATUS
> +EFIAPI
> +CpuIoServiceRead (
> + IN EFI_CPU_IO2_PROTOCOL *This,
> + IN EFI_CPU_IO_PROTOCOL_WIDTH Width,
> + IN UINT64 Address,
> + IN UINTN Count,
> + OUT VOID *Buffer
> + )
> +{
> + EFI_STATUS Status;
> + UINT8 InStride;
> + UINT8 OutStride;
> + EFI_CPU_IO_PROTOCOL_WIDTH OperationWidth;
> + UINT8 *Uint8Buffer;
> +
> + Status = CpuIoCheckParameter (FALSE, Width, Address, Count, Buffer);
> + if (EFI_ERROR (Status)) {
> + return Status;
> + }
> +
> + //
> + // Select loop based on the width of the transfer
> + //
> + InStride = mInStride[Width];
> + OutStride = mOutStride[Width];
> + OperationWidth = (EFI_CPU_IO_PROTOCOL_WIDTH) (Width & 0x03);
> +
> + // Assuming address has already been translated into MMIO address by PCI host
> + // bridge driver, so we call MmioRead/Write directly.
> + for (Uint8Buffer = Buffer; Count > 0; Address += InStride, Uint8Buffer += OutStride, Count--) {
> + if (OperationWidth == EfiCpuIoWidthUint8) {
> + *Uint8Buffer = MmioRead8 ((UINTN)Address);
> + } else if (OperationWidth == EfiCpuIoWidthUint16) {
> + *((UINT16 *)Uint8Buffer) = MmioRead16 ((UINTN)Address);
> + } else if (OperationWidth == EfiCpuIoWidthUint32) {
> + *((UINT32 *)Uint8Buffer) = MmioRead32 ((UINTN)Address);
> + }
> + }
> +
> + return EFI_SUCCESS;
> +}
> +
> +/**
> + Write I/O registers.
> +
> + The I/O operations are carried out exactly as requested. The caller is responsible
> + for satisfying any alignment and I/O width restrictions that a PI System on a
> + platform might require. For example on some platforms, width requests of
> + EfiCpuIoWidthUint64 do not work. Misaligned buffers, on the other hand, will
> + be handled by the driver.
> +
> + If Width is EfiCpuIoWidthUint8, EfiCpuIoWidthUint16, EfiCpuIoWidthUint32,
> + or EfiCpuIoWidthUint64, then both Address and Buffer are incremented for
> + each of the Count operations that is performed.
> +
> + If Width is EfiCpuIoWidthFifoUint8, EfiCpuIoWidthFifoUint16,
> + EfiCpuIoWidthFifoUint32, or EfiCpuIoWidthFifoUint64, then only Buffer is
> + incremented for each of the Count operations that is performed. The read or
> + write operation is performed Count times on the same Address.
> +
> + If Width is EfiCpuIoWidthFillUint8, EfiCpuIoWidthFillUint16,
> + EfiCpuIoWidthFillUint32, or EfiCpuIoWidthFillUint64, then only Address is
> + incremented for each of the Count operations that is performed. The read or
> + write operation is performed Count times from the first element of Buffer.
> +
> + @param[in] This A pointer to the EFI_CPU_IO2_PROTOCOL instance.
> + @param[in] Width Signifies the width of the I/O or Memory operation.
> + @param[in] Address The base address of the I/O operation.
> + @param[in] Count The number of I/O operations to perform. The number of
> + bytes moved is Width size * Count, starting at Address.
> + @param[in] Buffer For read operations, the destination buffer to store the results.
> + For write operations, the source buffer from which to write data.
> +
> + @retval EFI_SUCCESS The data was read from or written to the PI system.
> + @retval EFI_INVALID_PARAMETER Width is invalid for this PI system.
> + @retval EFI_INVALID_PARAMETER Buffer is NULL.
> + @retval EFI_UNSUPPORTED The Buffer is not aligned for the given Width.
> + @retval EFI_UNSUPPORTED The address range specified by Address, Width,
> + and Count is not valid for this PI system.
> +
> +**/
> +STATIC
> +EFI_STATUS
> +EFIAPI
> +CpuIoServiceWrite (
> + IN EFI_CPU_IO2_PROTOCOL *This,
> + IN EFI_CPU_IO_PROTOCOL_WIDTH Width,
> + IN UINT64 Address,
> + IN UINTN Count,
> + IN VOID *Buffer
> + )
> +{
> + EFI_STATUS Status;
> + UINT8 InStride;
> + UINT8 OutStride;
> + EFI_CPU_IO_PROTOCOL_WIDTH OperationWidth;
> + UINT8 *Uint8Buffer;
> +
> + //
> + // Make sure the parameters are valid
> + //
> + Status = CpuIoCheckParameter (FALSE, Width, Address, Count, Buffer);
> + if (EFI_ERROR (Status)) {
> + return Status;
> + }
> +
> + //
> + // Select loop based on the width of the transfer
> + //
> + InStride = mInStride[Width];
> + OutStride = mOutStride[Width];
> + OperationWidth = (EFI_CPU_IO_PROTOCOL_WIDTH) (Width & 0x03);
> +
> + // Assuming address has already been translated into MMIO address by PCI host
> + // bridge driver, so we call MmioRead/Write directly.
> + for (Uint8Buffer = (UINT8 *)Buffer; Count > 0; Address += InStride, Uint8Buffer += OutStride, Count--) {
> + if (OperationWidth == EfiCpuIoWidthUint8) {
> + MmioWrite8 ((UINTN)Address, *Uint8Buffer);
> + } else if (OperationWidth == EfiCpuIoWidthUint16) {
> + MmioWrite16 ((UINTN)Address, *((UINT16 *)Uint8Buffer));
> + } else if (OperationWidth == EfiCpuIoWidthUint32) {
> + MmioWrite32 ((UINTN)Address, *((UINT32 *)Uint8Buffer));
> + }
> + }
> +
> + return EFI_SUCCESS;
> +}
> +
> +//
> +// CPU I/O 2 Protocol instance
> +//
> +STATIC EFI_CPU_IO2_PROTOCOL mCpuIo2 = {
> + {
> + CpuMemoryServiceRead,
> + CpuMemoryServiceWrite
> + },
> + {
> + CpuIoServiceRead,
> + CpuIoServiceWrite
> + }
> +};
> +
> +
> +/**
> + The user Entry Point for module CpuIo2Dxe. The user code starts with this function.
> +
> + @param[in] ImageHandle The firmware allocated handle for the EFI image.
> + @param[in] SystemTable A pointer to the EFI System Table.
> +
> + @retval EFI_SUCCESS The entry point is executed successfully.
> + @retval other Some error occurs when executing this entry point.
> +
> +**/
> +EFI_STATUS
> +EFIAPI
> +ArmPciCpuIo2Initialize (
> + IN EFI_HANDLE ImageHandle,
> + IN EFI_SYSTEM_TABLE *SystemTable
> + )
> +{
> + EFI_STATUS Status;
> +
> + ASSERT_PROTOCOL_ALREADY_INSTALLED (NULL, &gEfiCpuIo2ProtocolGuid);
> + Status = gBS->InstallMultipleProtocolInterfaces (
> + &ImageHandle,
> + &gEfiCpuIo2ProtocolGuid, &mCpuIo2,
> + NULL
> + );
> + ASSERT_EFI_ERROR (Status);
> +
> + return Status;
> +}
> diff --git a/Silicon/Hisilicon/Drivers/ArmPciCpuIo2Dxe/ArmPciCpuIo2Dxe.inf b/Silicon/Hisilicon/Drivers/ArmPciCpuIo2Dxe/ArmPciCpuIo2Dxe.inf
> new file mode 100644
> index 0000000000..fbb28319ca
> --- /dev/null
> +++ b/Silicon/Hisilicon/Drivers/ArmPciCpuIo2Dxe/ArmPciCpuIo2Dxe.inf
> @@ -0,0 +1,48 @@
> +## @file
> +# Produces the CPU I/O 2 Protocol by using the services of the I/O Library.
> +#
> +# Copyright (c) 2009 - 2014, Intel Corporation. All rights reserved.<BR>
> +# Copyright (c) 2016 - 2018, Linaro Ltd. All rights reserved.<BR>
> +# Copyright (c) 2018, Hisilicon Ltd. All rights reserved.<BR>
> +#
> +# This program and the accompanying materials
> +# are licensed and made available under the terms and conditions of the BSD License
> +# which accompanies this distribution. The full text of the license may be found at
> +# http://opensource.org/licenses/bsd-license.php
> +#
> +# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> +# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
> +#
> +##
> +
> +[Defines]
> + INF_VERSION = 0x0001001A
> + BASE_NAME = ArmPciCpuIo2Dxe
> + FILE_GUID = 94577c7e-0bce-11e8-b4e8-286ed489ee9b
> + MODULE_TYPE = DXE_DRIVER
> + VERSION_STRING = 1.0
> + ENTRY_POINT = ArmPciCpuIo2Initialize
> +
> +#
> +# The following information is for reference only and not required by the build tools.
> +#
> +# VALID_ARCHITECTURES = ARM AARCH64
> +#
> +
> +[Sources]
> + ArmPciCpuIo2Dxe.c
> +
> +[Packages]
> + MdePkg/MdePkg.dec
> +
> +[LibraryClasses]
> + UefiDriverEntryPoint
> + BaseLib
> + DebugLib
> + IoLib
> +
> +[Protocols]
> + gEfiCpuIo2ProtocolGuid ## PRODUCES
> +
> +[Depex]
> + TRUE
> --
> 2.17.0
>
^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [PATCH edk2-platforms v1 09/13] Hisilicon: add PciCpuIo2Dxe
2018-07-20 10:31 ` Ard Biesheuvel
@ 2018-07-23 1:12 ` Ming
0 siblings, 0 replies; 16+ messages in thread
From: Ming @ 2018-07-23 1:12 UTC (permalink / raw)
To: Ard Biesheuvel
Cc: Leif Lindholm, linaro-uefi, edk2-devel@lists.01.org,
Graeme Gregory, guoheyi, wanghuiqiang, huangming, Jason Zhang,
huangdaode, John Garry, Heyi Guo, Michael D Kinney
在 7/20/2018 6:31 PM, Ard Biesheuvel 写道:
> (reply to correct version of the patch - apologies for the spam if you
> got this twice)
>
> On 20 July 2018 at 17:02, Ming Huang <ming.huang@linaro.org> wrote:
>> From: Heyi Guo <heyi.guo@linaro.org>
>>
>> This is to prepare for switching to generic PciHostBridge, and
>> CpuIo2Dxe is needed by generic PciHostBridge driver.
>>
>> The driver is copied from ArmPkg/Drivers/ArmPciCpuIo2Dxe and changed
>> for D0x.
>>
>> Contributed-under: TianoCore Contribution Agreement 1.1
>> Signed-off-by: Heyi Guo <heyi.guo@linaro.org>
>> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
>> Cc: Leif Lindholm <leif.lindholm@linaro.org>
>> Cc: Michael D Kinney <michael.d.kinney@intel.com>
>
> Why do you need this driver? Can you not simply set
> gArmTokenSpaceGuid.PcdPciIoTranslation to 0x0 and use
> ArmPkg/Drivers/ArmPciCpuIo2Dxe/ArmPciCpuIo2Dxe.inf instead?
>
Yes, using ArmPciCpuIo2Dxe is a good idea, I will modify it in v2.
Thanks.
>> ---
>> Silicon/Hisilicon/Drivers/ArmPciCpuIo2Dxe/ArmPciCpuIo2Dxe.c | 557 ++++++++++++++++++++
>> Silicon/Hisilicon/Drivers/ArmPciCpuIo2Dxe/ArmPciCpuIo2Dxe.inf | 48 ++
>> 2 files changed, 605 insertions(+)
>>
>> diff --git a/Silicon/Hisilicon/Drivers/ArmPciCpuIo2Dxe/ArmPciCpuIo2Dxe.c b/Silicon/Hisilicon/Drivers/ArmPciCpuIo2Dxe/ArmPciCpuIo2Dxe.c
>> new file mode 100644
>> index 0000000000..8426c5935c
>> --- /dev/null
>> +++ b/Silicon/Hisilicon/Drivers/ArmPciCpuIo2Dxe/ArmPciCpuIo2Dxe.c
>> @@ -0,0 +1,557 @@
>> +/** @file
>> + Produces the CPU I/O 2 Protocol.
>> +
>> +Copyright (c) 2009 - 2012, Intel Corporation. All rights reserved.<BR>
>> +Copyright (c) 2016 - 2018, Linaro Ltd. All rights reserved.<BR>
>> +Copyright (c) 2018, Hisilicon Ltd. All rights reserved.<BR>
>> +
>> +This program and the accompanying materials
>> +are licensed and made available under the terms and conditions of the BSD License
>> +which accompanies this distribution. The full text of the license may be found at
>> +http://opensource.org/licenses/bsd-license.php
>> +
>> +THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
>> +WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
>> +
>> +**/
>> +
>> +#include <PiDxe.h>
>> +
>> +#include <Protocol/CpuIo2.h>
>> +
>> +#include <Library/BaseLib.h>
>> +#include <Library/DebugLib.h>
>> +#include <Library/IoLib.h>
>> +#include <Library/PcdLib.h>
>> +#include <Library/UefiBootServicesTableLib.h>
>> +
>> +// The translated IO PORT address is already a MMIO address, so we make it the
>> +// same as memory address for range check.
>> +#define MAX_IO_PORT_ADDRESS MAX_ADDRESS
>> +
>> +//
>> +// Lookup table for increment values based on transfer widths
>> +//
>> +STATIC CONST UINT8 mInStride[] = {
>> + 1, // EfiCpuIoWidthUint8
>> + 2, // EfiCpuIoWidthUint16
>> + 4, // EfiCpuIoWidthUint32
>> + 8, // EfiCpuIoWidthUint64
>> + 0, // EfiCpuIoWidthFifoUint8
>> + 0, // EfiCpuIoWidthFifoUint16
>> + 0, // EfiCpuIoWidthFifoUint32
>> + 0, // EfiCpuIoWidthFifoUint64
>> + 1, // EfiCpuIoWidthFillUint8
>> + 2, // EfiCpuIoWidthFillUint16
>> + 4, // EfiCpuIoWidthFillUint32
>> + 8 // EfiCpuIoWidthFillUint64
>> +};
>> +
>> +//
>> +// Lookup table for increment values based on transfer widths
>> +//
>> +STATIC CONST UINT8 mOutStride[] = {
>> + 1, // EfiCpuIoWidthUint8
>> + 2, // EfiCpuIoWidthUint16
>> + 4, // EfiCpuIoWidthUint32
>> + 8, // EfiCpuIoWidthUint64
>> + 1, // EfiCpuIoWidthFifoUint8
>> + 2, // EfiCpuIoWidthFifoUint16
>> + 4, // EfiCpuIoWidthFifoUint32
>> + 8, // EfiCpuIoWidthFifoUint64
>> + 0, // EfiCpuIoWidthFillUint8
>> + 0, // EfiCpuIoWidthFillUint16
>> + 0, // EfiCpuIoWidthFillUint32
>> + 0 // EfiCpuIoWidthFillUint64
>> +};
>> +
>> +/**
>> + Check parameters to a CPU I/O 2 Protocol service request.
>> +
>> + The I/O operations are carried out exactly as requested. The caller is responsible
>> + for satisfying any alignment and I/O width restrictions that a PI System on a
>> + platform might require. For example on some platforms, width requests of
>> + EfiCpuIoWidthUint64 do not work. Misaligned buffers, on the other hand, will
>> + be handled by the driver.
>> +
>> + @param[in] MmioOperation TRUE for an MMIO operation, FALSE for I/O Port operation.
>> + @param[in] Width Signifies the width of the I/O or Memory operation.
>> + @param[in] Address The base address of the I/O operation.
>> + @param[in] Count The number of I/O operations to perform. The number of
>> + bytes moved is Width size * Count, starting at Address.
>> + @param[in] Buffer For read operations, the destination buffer to store the results.
>> + For write operations, the source buffer from which to write data.
>> +
>> + @retval EFI_SUCCESS The parameters for this request pass the checks.
>> + @retval EFI_INVALID_PARAMETER Width is invalid for this PI system.
>> + @retval EFI_INVALID_PARAMETER Buffer is NULL.
>> + @retval EFI_UNSUPPORTED The Buffer is not aligned for the given Width.
>> + @retval EFI_UNSUPPORTED The address range specified by Address, Width,
>> + and Count is not valid for this PI system.
>> +
>> +**/
>> +STATIC
>> +EFI_STATUS
>> +CpuIoCheckParameter (
>> + IN BOOLEAN MmioOperation,
>> + IN EFI_CPU_IO_PROTOCOL_WIDTH Width,
>> + IN UINT64 Address,
>> + IN UINTN Count,
>> + IN VOID *Buffer
>> + )
>> +{
>> + UINT64 MaxCount;
>> + UINT64 Limit;
>> +
>> + //
>> + // Check to see if Buffer is NULL
>> + //
>> + if (Buffer == NULL) {
>> + return EFI_INVALID_PARAMETER;
>> + }
>> +
>> + //
>> + // Check to see if Width is in the valid range
>> + //
>> + if ((UINT32)Width >= EfiCpuIoWidthMaximum) {
>> + return EFI_INVALID_PARAMETER;
>> + }
>> +
>> + //
>> + // For FIFO type, the target address won't increase during the access,
>> + // so treat Count as 1
>> + //
>> + if (Width >= EfiCpuIoWidthFifoUint8 && Width <= EfiCpuIoWidthFifoUint64) {
>> + Count = 1;
>> + }
>> +
>> + //
>> + // Check to see if Width is in the valid range for I/O Port operations
>> + //
>> + Width = (EFI_CPU_IO_PROTOCOL_WIDTH) (Width & 0x03);
>> + if (!MmioOperation && (Width == EfiCpuIoWidthUint64)) {
>> + return EFI_INVALID_PARAMETER;
>> + }
>> +
>> + //
>> + // Check to see if Address is aligned
>> + //
>> + if ((Address & (UINT64)(mInStride[Width] - 1)) != 0) {
>> + return EFI_UNSUPPORTED;
>> + }
>> +
>> + //
>> + // Check to see if any address associated with this transfer exceeds the maximum
>> + // allowed address. The maximum address implied by the parameters passed in is
>> + // Address + Size * Count. If the following condition is met, then the transfer
>> + // is not supported.
>> + //
>> + // Address + Size * Count > (MmioOperation ? MAX_ADDRESS : MAX_IO_PORT_ADDRESS) + 1
>> + //
>> + // Since MAX_ADDRESS can be the maximum integer value supported by the CPU and Count
>> + // can also be the maximum integer value supported by the CPU, this range
>> + // check must be adjusted to avoid all oveflow conditions.
>> + //
>> + // The following form of the range check is equivalent but assumes that
>> + // MAX_ADDRESS and MAX_IO_PORT_ADDRESS are of the form (2^n - 1).
>> + //
>> + Limit = (MmioOperation ? MAX_ADDRESS : MAX_IO_PORT_ADDRESS);
>> + if (Count == 0) {
>> + if (Address > Limit) {
>> + return EFI_UNSUPPORTED;
>> + }
>> + } else {
>> + MaxCount = RShiftU64 (Limit, Width);
>> + if (MaxCount < (Count - 1)) {
>> + return EFI_UNSUPPORTED;
>> + }
>> + if (Address > LShiftU64 (MaxCount - Count + 1, Width)) {
>> + return EFI_UNSUPPORTED;
>> + }
>> + }
>> +
>> + //
>> + // Check to see if Buffer is aligned
>> + //
>> + if (((UINTN)Buffer & ((MIN (sizeof (UINTN), mInStride[Width]) - 1))) != 0) {
>> + return EFI_UNSUPPORTED;
>> + }
>> +
>> + return EFI_SUCCESS;
>> +}
>> +
>> +/**
>> + Reads memory-mapped registers.
>> +
>> + The I/O operations are carried out exactly as requested. The caller is responsible
>> + for satisfying any alignment and I/O width restrictions that a PI System on a
>> + platform might require. For example on some platforms, width requests of
>> + EfiCpuIoWidthUint64 do not work. Misaligned buffers, on the other hand, will
>> + be handled by the driver.
>> +
>> + If Width is EfiCpuIoWidthUint8, EfiCpuIoWidthUint16, EfiCpuIoWidthUint32,
>> + or EfiCpuIoWidthUint64, then both Address and Buffer are incremented for
>> + each of the Count operations that is performed.
>> +
>> + If Width is EfiCpuIoWidthFifoUint8, EfiCpuIoWidthFifoUint16,
>> + EfiCpuIoWidthFifoUint32, or EfiCpuIoWidthFifoUint64, then only Buffer is
>> + incremented for each of the Count operations that is performed. The read or
>> + write operation is performed Count times on the same Address.
>> +
>> + If Width is EfiCpuIoWidthFillUint8, EfiCpuIoWidthFillUint16,
>> + EfiCpuIoWidthFillUint32, or EfiCpuIoWidthFillUint64, then only Address is
>> + incremented for each of the Count operations that is performed. The read or
>> + write operation is performed Count times from the first element of Buffer.
>> +
>> + @param[in] This A pointer to the EFI_CPU_IO2_PROTOCOL instance.
>> + @param[in] Width Signifies the width of the I/O or Memory operation.
>> + @param[in] Address The base address of the I/O operation.
>> + @param[in] Count The number of I/O operations to perform. The number of
>> + bytes moved is Width size * Count, starting at Address.
>> + @param[out] Buffer For read operations, the destination buffer to store the results.
>> + For write operations, the source buffer from which to write data.
>> +
>> + @retval EFI_SUCCESS The data was read from or written to the PI system.
>> + @retval EFI_INVALID_PARAMETER Width is invalid for this PI system.
>> + @retval EFI_INVALID_PARAMETER Buffer is NULL.
>> + @retval EFI_UNSUPPORTED The Buffer is not aligned for the given Width.
>> + @retval EFI_UNSUPPORTED The address range specified by Address, Width,
>> + and Count is not valid for this PI system.
>> +
>> +**/
>> +STATIC
>> +EFI_STATUS
>> +EFIAPI
>> +CpuMemoryServiceRead (
>> + IN EFI_CPU_IO2_PROTOCOL *This,
>> + IN EFI_CPU_IO_PROTOCOL_WIDTH Width,
>> + IN UINT64 Address,
>> + IN UINTN Count,
>> + OUT VOID *Buffer
>> + )
>> +{
>> + EFI_STATUS Status;
>> + UINT8 InStride;
>> + UINT8 OutStride;
>> + EFI_CPU_IO_PROTOCOL_WIDTH OperationWidth;
>> + UINT8 *Uint8Buffer;
>> +
>> + Status = CpuIoCheckParameter (TRUE, Width, Address, Count, Buffer);
>> + if (EFI_ERROR (Status)) {
>> + return Status;
>> + }
>> +
>> + //
>> + // Select loop based on the width of the transfer
>> + //
>> + InStride = mInStride[Width];
>> + OutStride = mOutStride[Width];
>> + OperationWidth = (EFI_CPU_IO_PROTOCOL_WIDTH) (Width & 0x03);
>> + for (Uint8Buffer = Buffer; Count > 0; Address += InStride, Uint8Buffer += OutStride, Count--) {
>> + if (OperationWidth == EfiCpuIoWidthUint8) {
>> + *Uint8Buffer = MmioRead8 ((UINTN)Address);
>> + } else if (OperationWidth == EfiCpuIoWidthUint16) {
>> + *((UINT16 *)Uint8Buffer) = MmioRead16 ((UINTN)Address);
>> + } else if (OperationWidth == EfiCpuIoWidthUint32) {
>> + *((UINT32 *)Uint8Buffer) = MmioRead32 ((UINTN)Address);
>> + } else if (OperationWidth == EfiCpuIoWidthUint64) {
>> + *((UINT64 *)Uint8Buffer) = MmioRead64 ((UINTN)Address);
>> + }
>> + }
>> + return EFI_SUCCESS;
>> +}
>> +
>> +/**
>> + Writes memory-mapped registers.
>> +
>> + The I/O operations are carried out exactly as requested. The caller is responsible
>> + for satisfying any alignment and I/O width restrictions that a PI System on a
>> + platform might require. For example on some platforms, width requests of
>> + EfiCpuIoWidthUint64 do not work. Misaligned buffers, on the other hand, will
>> + be handled by the driver.
>> +
>> + If Width is EfiCpuIoWidthUint8, EfiCpuIoWidthUint16, EfiCpuIoWidthUint32,
>> + or EfiCpuIoWidthUint64, then both Address and Buffer are incremented for
>> + each of the Count operations that is performed.
>> +
>> + If Width is EfiCpuIoWidthFifoUint8, EfiCpuIoWidthFifoUint16,
>> + EfiCpuIoWidthFifoUint32, or EfiCpuIoWidthFifoUint64, then only Buffer is
>> + incremented for each of the Count operations that is performed. The read or
>> + write operation is performed Count times on the same Address.
>> +
>> + If Width is EfiCpuIoWidthFillUint8, EfiCpuIoWidthFillUint16,
>> + EfiCpuIoWidthFillUint32, or EfiCpuIoWidthFillUint64, then only Address is
>> + incremented for each of the Count operations that is performed. The read or
>> + write operation is performed Count times from the first element of Buffer.
>> +
>> + @param[in] This A pointer to the EFI_CPU_IO2_PROTOCOL instance.
>> + @param[in] Width Signifies the width of the I/O or Memory operation.
>> + @param[in] Address The base address of the I/O operation.
>> + @param[in] Count The number of I/O operations to perform. The number of
>> + bytes moved is Width size * Count, starting at Address.
>> + @param[in] Buffer For read operations, the destination buffer to store the results.
>> + For write operations, the source buffer from which to write data.
>> +
>> + @retval EFI_SUCCESS The data was read from or written to the PI system.
>> + @retval EFI_INVALID_PARAMETER Width is invalid for this PI system.
>> + @retval EFI_INVALID_PARAMETER Buffer is NULL.
>> + @retval EFI_UNSUPPORTED The Buffer is not aligned for the given Width.
>> + @retval EFI_UNSUPPORTED The address range specified by Address, Width,
>> + and Count is not valid for this PI system.
>> +
>> +**/
>> +STATIC
>> +EFI_STATUS
>> +EFIAPI
>> +CpuMemoryServiceWrite (
>> + IN EFI_CPU_IO2_PROTOCOL *This,
>> + IN EFI_CPU_IO_PROTOCOL_WIDTH Width,
>> + IN UINT64 Address,
>> + IN UINTN Count,
>> + IN VOID *Buffer
>> + )
>> +{
>> + EFI_STATUS Status;
>> + UINT8 InStride;
>> + UINT8 OutStride;
>> + EFI_CPU_IO_PROTOCOL_WIDTH OperationWidth;
>> + UINT8 *Uint8Buffer;
>> +
>> + Status = CpuIoCheckParameter (TRUE, Width, Address, Count, Buffer);
>> + if (EFI_ERROR (Status)) {
>> + return Status;
>> + }
>> +
>> + //
>> + // Select loop based on the width of the transfer
>> + //
>> + InStride = mInStride[Width];
>> + OutStride = mOutStride[Width];
>> + OperationWidth = (EFI_CPU_IO_PROTOCOL_WIDTH) (Width & 0x03);
>> + for (Uint8Buffer = Buffer; Count > 0; Address += InStride, Uint8Buffer += OutStride, Count--) {
>> + if (OperationWidth == EfiCpuIoWidthUint8) {
>> + MmioWrite8 ((UINTN)Address, *Uint8Buffer);
>> + } else if (OperationWidth == EfiCpuIoWidthUint16) {
>> + MmioWrite16 ((UINTN)Address, *((UINT16 *)Uint8Buffer));
>> + } else if (OperationWidth == EfiCpuIoWidthUint32) {
>> + MmioWrite32 ((UINTN)Address, *((UINT32 *)Uint8Buffer));
>> + } else if (OperationWidth == EfiCpuIoWidthUint64) {
>> + MmioWrite64 ((UINTN)Address, *((UINT64 *)Uint8Buffer));
>> + }
>> + }
>> + return EFI_SUCCESS;
>> +}
>> +
>> +/**
>> + Reads I/O registers.
>> +
>> + The I/O operations are carried out exactly as requested. The caller is responsible
>> + for satisfying any alignment and I/O width restrictions that a PI System on a
>> + platform might require. For example on some platforms, width requests of
>> + EfiCpuIoWidthUint64 do not work. Misaligned buffers, on the other hand, will
>> + be handled by the driver.
>> +
>> + If Width is EfiCpuIoWidthUint8, EfiCpuIoWidthUint16, EfiCpuIoWidthUint32,
>> + or EfiCpuIoWidthUint64, then both Address and Buffer are incremented for
>> + each of the Count operations that is performed.
>> +
>> + If Width is EfiCpuIoWidthFifoUint8, EfiCpuIoWidthFifoUint16,
>> + EfiCpuIoWidthFifoUint32, or EfiCpuIoWidthFifoUint64, then only Buffer is
>> + incremented for each of the Count operations that is performed. The read or
>> + write operation is performed Count times on the same Address.
>> +
>> + If Width is EfiCpuIoWidthFillUint8, EfiCpuIoWidthFillUint16,
>> + EfiCpuIoWidthFillUint32, or EfiCpuIoWidthFillUint64, then only Address is
>> + incremented for each of the Count operations that is performed. The read or
>> + write operation is performed Count times from the first element of Buffer.
>> +
>> + @param[in] This A pointer to the EFI_CPU_IO2_PROTOCOL instance.
>> + @param[in] Width Signifies the width of the I/O or Memory operation.
>> + @param[in] Address The base address of the I/O operation.
>> + @param[in] Count The number of I/O operations to perform. The number of
>> + bytes moved is Width size * Count, starting at Address.
>> + @param[out] Buffer For read operations, the destination buffer to store the results.
>> + For write operations, the source buffer from which to write data.
>> +
>> + @retval EFI_SUCCESS The data was read from or written to the PI system.
>> + @retval EFI_INVALID_PARAMETER Width is invalid for this PI system.
>> + @retval EFI_INVALID_PARAMETER Buffer is NULL.
>> + @retval EFI_UNSUPPORTED The Buffer is not aligned for the given Width.
>> + @retval EFI_UNSUPPORTED The address range specified by Address, Width,
>> + and Count is not valid for this PI system.
>> +
>> +**/
>> +STATIC
>> +EFI_STATUS
>> +EFIAPI
>> +CpuIoServiceRead (
>> + IN EFI_CPU_IO2_PROTOCOL *This,
>> + IN EFI_CPU_IO_PROTOCOL_WIDTH Width,
>> + IN UINT64 Address,
>> + IN UINTN Count,
>> + OUT VOID *Buffer
>> + )
>> +{
>> + EFI_STATUS Status;
>> + UINT8 InStride;
>> + UINT8 OutStride;
>> + EFI_CPU_IO_PROTOCOL_WIDTH OperationWidth;
>> + UINT8 *Uint8Buffer;
>> +
>> + Status = CpuIoCheckParameter (FALSE, Width, Address, Count, Buffer);
>> + if (EFI_ERROR (Status)) {
>> + return Status;
>> + }
>> +
>> + //
>> + // Select loop based on the width of the transfer
>> + //
>> + InStride = mInStride[Width];
>> + OutStride = mOutStride[Width];
>> + OperationWidth = (EFI_CPU_IO_PROTOCOL_WIDTH) (Width & 0x03);
>> +
>> + // Assuming address has already been translated into MMIO address by PCI host
>> + // bridge driver, so we call MmioRead/Write directly.
>> + for (Uint8Buffer = Buffer; Count > 0; Address += InStride, Uint8Buffer += OutStride, Count--) {
>> + if (OperationWidth == EfiCpuIoWidthUint8) {
>> + *Uint8Buffer = MmioRead8 ((UINTN)Address);
>> + } else if (OperationWidth == EfiCpuIoWidthUint16) {
>> + *((UINT16 *)Uint8Buffer) = MmioRead16 ((UINTN)Address);
>> + } else if (OperationWidth == EfiCpuIoWidthUint32) {
>> + *((UINT32 *)Uint8Buffer) = MmioRead32 ((UINTN)Address);
>> + }
>> + }
>> +
>> + return EFI_SUCCESS;
>> +}
>> +
>> +/**
>> + Write I/O registers.
>> +
>> + The I/O operations are carried out exactly as requested. The caller is responsible
>> + for satisfying any alignment and I/O width restrictions that a PI System on a
>> + platform might require. For example on some platforms, width requests of
>> + EfiCpuIoWidthUint64 do not work. Misaligned buffers, on the other hand, will
>> + be handled by the driver.
>> +
>> + If Width is EfiCpuIoWidthUint8, EfiCpuIoWidthUint16, EfiCpuIoWidthUint32,
>> + or EfiCpuIoWidthUint64, then both Address and Buffer are incremented for
>> + each of the Count operations that is performed.
>> +
>> + If Width is EfiCpuIoWidthFifoUint8, EfiCpuIoWidthFifoUint16,
>> + EfiCpuIoWidthFifoUint32, or EfiCpuIoWidthFifoUint64, then only Buffer is
>> + incremented for each of the Count operations that is performed. The read or
>> + write operation is performed Count times on the same Address.
>> +
>> + If Width is EfiCpuIoWidthFillUint8, EfiCpuIoWidthFillUint16,
>> + EfiCpuIoWidthFillUint32, or EfiCpuIoWidthFillUint64, then only Address is
>> + incremented for each of the Count operations that is performed. The read or
>> + write operation is performed Count times from the first element of Buffer.
>> +
>> + @param[in] This A pointer to the EFI_CPU_IO2_PROTOCOL instance.
>> + @param[in] Width Signifies the width of the I/O or Memory operation.
>> + @param[in] Address The base address of the I/O operation.
>> + @param[in] Count The number of I/O operations to perform. The number of
>> + bytes moved is Width size * Count, starting at Address.
>> + @param[in] Buffer For read operations, the destination buffer to store the results.
>> + For write operations, the source buffer from which to write data.
>> +
>> + @retval EFI_SUCCESS The data was read from or written to the PI system.
>> + @retval EFI_INVALID_PARAMETER Width is invalid for this PI system.
>> + @retval EFI_INVALID_PARAMETER Buffer is NULL.
>> + @retval EFI_UNSUPPORTED The Buffer is not aligned for the given Width.
>> + @retval EFI_UNSUPPORTED The address range specified by Address, Width,
>> + and Count is not valid for this PI system.
>> +
>> +**/
>> +STATIC
>> +EFI_STATUS
>> +EFIAPI
>> +CpuIoServiceWrite (
>> + IN EFI_CPU_IO2_PROTOCOL *This,
>> + IN EFI_CPU_IO_PROTOCOL_WIDTH Width,
>> + IN UINT64 Address,
>> + IN UINTN Count,
>> + IN VOID *Buffer
>> + )
>> +{
>> + EFI_STATUS Status;
>> + UINT8 InStride;
>> + UINT8 OutStride;
>> + EFI_CPU_IO_PROTOCOL_WIDTH OperationWidth;
>> + UINT8 *Uint8Buffer;
>> +
>> + //
>> + // Make sure the parameters are valid
>> + //
>> + Status = CpuIoCheckParameter (FALSE, Width, Address, Count, Buffer);
>> + if (EFI_ERROR (Status)) {
>> + return Status;
>> + }
>> +
>> + //
>> + // Select loop based on the width of the transfer
>> + //
>> + InStride = mInStride[Width];
>> + OutStride = mOutStride[Width];
>> + OperationWidth = (EFI_CPU_IO_PROTOCOL_WIDTH) (Width & 0x03);
>> +
>> + // Assuming address has already been translated into MMIO address by PCI host
>> + // bridge driver, so we call MmioRead/Write directly.
>> + for (Uint8Buffer = (UINT8 *)Buffer; Count > 0; Address += InStride, Uint8Buffer += OutStride, Count--) {
>> + if (OperationWidth == EfiCpuIoWidthUint8) {
>> + MmioWrite8 ((UINTN)Address, *Uint8Buffer);
>> + } else if (OperationWidth == EfiCpuIoWidthUint16) {
>> + MmioWrite16 ((UINTN)Address, *((UINT16 *)Uint8Buffer));
>> + } else if (OperationWidth == EfiCpuIoWidthUint32) {
>> + MmioWrite32 ((UINTN)Address, *((UINT32 *)Uint8Buffer));
>> + }
>> + }
>> +
>> + return EFI_SUCCESS;
>> +}
>> +
>> +//
>> +// CPU I/O 2 Protocol instance
>> +//
>> +STATIC EFI_CPU_IO2_PROTOCOL mCpuIo2 = {
>> + {
>> + CpuMemoryServiceRead,
>> + CpuMemoryServiceWrite
>> + },
>> + {
>> + CpuIoServiceRead,
>> + CpuIoServiceWrite
>> + }
>> +};
>> +
>> +
>> +/**
>> + The user Entry Point for module CpuIo2Dxe. The user code starts with this function.
>> +
>> + @param[in] ImageHandle The firmware allocated handle for the EFI image.
>> + @param[in] SystemTable A pointer to the EFI System Table.
>> +
>> + @retval EFI_SUCCESS The entry point is executed successfully.
>> + @retval other Some error occurs when executing this entry point.
>> +
>> +**/
>> +EFI_STATUS
>> +EFIAPI
>> +ArmPciCpuIo2Initialize (
>> + IN EFI_HANDLE ImageHandle,
>> + IN EFI_SYSTEM_TABLE *SystemTable
>> + )
>> +{
>> + EFI_STATUS Status;
>> +
>> + ASSERT_PROTOCOL_ALREADY_INSTALLED (NULL, &gEfiCpuIo2ProtocolGuid);
>> + Status = gBS->InstallMultipleProtocolInterfaces (
>> + &ImageHandle,
>> + &gEfiCpuIo2ProtocolGuid, &mCpuIo2,
>> + NULL
>> + );
>> + ASSERT_EFI_ERROR (Status);
>> +
>> + return Status;
>> +}
>> diff --git a/Silicon/Hisilicon/Drivers/ArmPciCpuIo2Dxe/ArmPciCpuIo2Dxe.inf b/Silicon/Hisilicon/Drivers/ArmPciCpuIo2Dxe/ArmPciCpuIo2Dxe.inf
>> new file mode 100644
>> index 0000000000..fbb28319ca
>> --- /dev/null
>> +++ b/Silicon/Hisilicon/Drivers/ArmPciCpuIo2Dxe/ArmPciCpuIo2Dxe.inf
>> @@ -0,0 +1,48 @@
>> +## @file
>> +# Produces the CPU I/O 2 Protocol by using the services of the I/O Library.
>> +#
>> +# Copyright (c) 2009 - 2014, Intel Corporation. All rights reserved.<BR>
>> +# Copyright (c) 2016 - 2018, Linaro Ltd. All rights reserved.<BR>
>> +# Copyright (c) 2018, Hisilicon Ltd. All rights reserved.<BR>
>> +#
>> +# This program and the accompanying materials
>> +# are licensed and made available under the terms and conditions of the BSD License
>> +# which accompanies this distribution. The full text of the license may be found at
>> +# http://opensource.org/licenses/bsd-license.php
>> +#
>> +# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
>> +# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
>> +#
>> +##
>> +
>> +[Defines]
>> + INF_VERSION = 0x0001001A
>> + BASE_NAME = ArmPciCpuIo2Dxe
>> + FILE_GUID = 94577c7e-0bce-11e8-b4e8-286ed489ee9b
>> + MODULE_TYPE = DXE_DRIVER
>> + VERSION_STRING = 1.0
>> + ENTRY_POINT = ArmPciCpuIo2Initialize
>> +
>> +#
>> +# The following information is for reference only and not required by the build tools.
>> +#
>> +# VALID_ARCHITECTURES = ARM AARCH64
>> +#
>> +
>> +[Sources]
>> + ArmPciCpuIo2Dxe.c
>> +
>> +[Packages]
>> + MdePkg/MdePkg.dec
>> +
>> +[LibraryClasses]
>> + UefiDriverEntryPoint
>> + BaseLib
>> + DebugLib
>> + IoLib
>> +
>> +[Protocols]
>> + gEfiCpuIo2ProtocolGuid ## PRODUCES
>> +
>> +[Depex]
>> + TRUE
>> --
>> 2.17.0
>>
^ permalink raw reply [flat|nested] 16+ messages in thread
end of thread, other threads:[~2018-07-23 1:12 UTC | newest]
Thread overview: 16+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2018-07-20 8:02 [PATCH edk2-platforms v1 00/13] Switching to generic PciHostBridge driver Ming Huang
2018-07-20 8:02 ` [PATCH edk2-platforms v1 01/13] Hisilicon: Enable WARN and INFO debug message Ming Huang
2018-07-20 8:02 ` [PATCH edk2-platforms v1 02/13] Hisilicon/D05/PlatformPciLib: fix misuse of macro Ming Huang
2018-07-20 8:02 ` [PATCH edk2-platforms v1 03/13] Hisilicon/Pci: Move PciPlatform to common directory Ming Huang
2018-07-20 8:02 ` [PATCH edk2-platforms v1 04/13] Hisilicon/Pci: Add two api for PciPlatform driver Ming Huang
2018-07-20 8:02 ` [PATCH edk2-platforms v1 05/13] Hisilicon/Pci: move ATU configuration to PciPlatformLib Ming Huang
2018-07-20 8:02 ` [PATCH edk2-platforms v1 06/13] Hisilicon/Pci: move EnlargeAtuConfig0() " Ming Huang
2018-07-20 8:02 ` [PATCH edk2-platforms v1 07/13] Hisilicon/PlatformPciLib: add segment for each root bridge Ming Huang
2018-07-20 8:02 ` [PATCH edk2-platforms v1 08/13] Hisilicon: add PciHostBridgeLib Ming Huang
2018-07-20 8:02 ` [PATCH edk2-platforms v1 09/13] Hisilicon: add PciCpuIo2Dxe Ming Huang
2018-07-20 10:31 ` Ard Biesheuvel
2018-07-23 1:12 ` Ming
2018-07-20 8:02 ` [PATCH edk2-platforms v1 10/13] Hisilicon: add PciSegmentLib for Hi161x Ming Huang
2018-07-20 8:02 ` [PATCH edk2-platforms v1 11/13] Hisilicon/D0x: Switch to generic PciHostBridge driver Ming Huang
2018-07-20 8:02 ` [PATCH edk2-platforms v1 12/13] Hisilicon: remove platform specific PciHostBridge Ming Huang
2018-07-20 8:02 ` [PATCH edk2-platforms v1 13/13] Hisilicon/PlatformPciLib: clear redundant felds in RESOURCE_APPETURE Ming Huang
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox