From: Leif Lindholm <leif.lindholm@linaro.org>
To: Ming Huang <ming.huang@linaro.org>
Cc: linaro-uefi@lists.linaro.org, edk2-devel@lists.01.org,
graeme.gregory@linaro.org, ard.biesheuvel@linaro.org,
guoheyi@huawei.com, wanghuiqiang@huawei.com,
huangming23@huawei.com, zhangjinsong2@huawei.com,
huangdaode@hisilicon.com, john.garry@huawei.com,
xinliang.liu@linaro.org, Heyi Guo <heyi.guo@linaro.org>
Subject: Re: [PATCH edk2-platforms v1 27/38] Platform/Hisilicon/D06: Add EarlyConfigPeim peim
Date: Sat, 4 Aug 2018 10:59:34 +0100 [thread overview]
Message-ID: <20180804095934.7dgxsy6ne7squzz7@bivouac.eciton.net> (raw)
In-Reply-To: <20180724070922.63362-28-ming.huang@linaro.org>
On Tue, Jul 24, 2018 at 03:09:11PM +0800, Ming Huang wrote:
> This peim configuare SMMU,AP,MN.
configuare -> configure
I know SMMU and AP, but I don't know MN.
Hmm, also, 'AP' is a bit unfortunate to use in EDK2 context.
PI specifies 'BSP' for Boot-strap Processor, as the one executing all
of the EDK2 code. It then uses 'AP' to refer to Additional Processors,
which can be assigned tasks using the EFI_MP_SERVICES_PROTOCOL.
So I think in a TianoCore context, this should be 'BSP'.
> Contributed-under: TianoCore Contribution Agreement 1.1
> Signed-off-by: Ming Huang <ming.huang@linaro.org>
> Signed-off-by: Heyi Guo <heyi.guo@linaro.org>
> ---
> Platform/Hisilicon/D06/D06.dsc | 1 +
> Platform/Hisilicon/D06/D06.fdf | 1 +
> Platform/Hisilicon/D06/EarlyConfigPeim/EarlyConfigPeimD06.c | 108 ++++++++++++++++++++
> Platform/Hisilicon/D06/EarlyConfigPeim/EarlyConfigPeimD06.inf | 50 +++++++++
> 4 files changed, 160 insertions(+)
>
> diff --git a/Platform/Hisilicon/D06/D06.dsc b/Platform/Hisilicon/D06/D06.dsc
> index 49322f8304..9e4f961116 100644
> --- a/Platform/Hisilicon/D06/D06.dsc
> +++ b/Platform/Hisilicon/D06/D06.dsc
> @@ -267,6 +267,7 @@
> MdeModulePkg/Universal/FaultTolerantWritePei/FaultTolerantWritePei.inf
> MdeModulePkg/Universal/Variable/Pei/VariablePei.inf
>
> + Platform/Hisilicon/D06/EarlyConfigPeim/EarlyConfigPeimD06.inf
> Silicon/Hisilicon/Drivers/VersionInfoPeim/VersionInfoPeim.inf
>
> MdeModulePkg/Core/DxeIplPeim/DxeIpl.inf {
> diff --git a/Platform/Hisilicon/D06/D06.fdf b/Platform/Hisilicon/D06/D06.fdf
> index e65dddd4e9..ec424d49ed 100644
> --- a/Platform/Hisilicon/D06/D06.fdf
> +++ b/Platform/Hisilicon/D06/D06.fdf
> @@ -359,6 +359,7 @@ READ_LOCK_STATUS = TRUE
> INF ArmPkg/Drivers/CpuPei/CpuPei.inf
> INF MdeModulePkg/Universal/PCD/Pei/Pcd.inf
> INF IntelFrameworkModulePkg/Universal/StatusCode/Pei/StatusCodePei.inf
> + INF Platform/Hisilicon/D06/EarlyConfigPeim/EarlyConfigPeimD06.inf
>
> INF MdeModulePkg/Core/DxeIplPeim/DxeIpl.inf
>
> diff --git a/Platform/Hisilicon/D06/EarlyConfigPeim/EarlyConfigPeimD06.c b/Platform/Hisilicon/D06/EarlyConfigPeim/EarlyConfigPeimD06.c
> new file mode 100644
> index 0000000000..606cdf926a
> --- /dev/null
> +++ b/Platform/Hisilicon/D06/EarlyConfigPeim/EarlyConfigPeimD06.c
> @@ -0,0 +1,108 @@
> +/** @file
> +*
> +* Copyright (c) 2018, Hisilicon Limited. All rights reserved.
> +* Copyright (c) 2018, Linaro Limited. All rights reserved.
> +*
> +* This program and the accompanying materials
> +* are licensed and made available under the terms and conditions of the BSD License
> +* which accompanies this distribution. The full text of the license may be found at
> +* http://opensource.org/licenses/bsd-license.php
> +*
> +* THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> +* WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
> +*
> +**/
> +
> +
> +#include <Uefi.h>
> +#include <PlatformArch.h> // This header file should be on ahead
Then please move it down instead of leaving a comment :)
> +#include <Library/ArmLib.h>
> +#include <Library/CacheMaintenanceLib.h>
> +#include <Library/DebugLib.h>
> +#include <Library/IoLib.h>
> +#include <Library/OemAddressMapLib.h>
> +#include <Library/OemMiscLib.h>
> +#include <Library/PcdLib.h>
> +#include <Library/PlatformSysCtrlLib.h>
> +#include <PiPei.h>
> +
> +#define PERI_SUBCTRL_BASE (0x40000000)
> +#define MDIO_SUBCTRL_BASE (0x60000000)
> +#define PCIE2_SUBCTRL_BASE (0xA0000000)
> +#define PCIE0_SUBCTRL_BASE (0xB0000000)
> +#define ALG_BASE (0xD0000000)
> +
> +#define SC_BROADCAST_EN_REG (0x16220)
> +#define SC_BROADCAST_SCL1_ADDR0_REG (0x16230)
> +#define SC_BROADCAST_SCL1_ADDR1_REG (0x16234)
> +#define SC_BROADCAST_SCL2_ADDR0_REG (0x16238)
> +#define SC_BROADCAST_SCL2_ADDR1_REG (0x1623C)
> +#define SC_BROADCAST_SCL3_ADDR0_REG (0x16240)
> +#define SC_BROADCAST_SCL3_ADDR1_REG (0x16244)
> +#define PCIE_SUBCTRL_SC_DISP_DAW_EN_REG (0x1000)
> +#define PCIE_SUBCTRL_SC_DISPATCH_DAW_ARRAY3_REG (0x1010)
> +#define PCIE_SUBCTRL_SC_DISPATCH_DAW_ARRAY4_REG (0x1014)
> +#define PCIE_SUBCTRL_SC_DISPATCH_DAW_ARRAY5_REG (0x1018)
> +#define PCIE_SUBCTRL_SC_DISPATCH_DAW_ARRAY6_REG (0x101C)
> +#define PCIE_SUBCTRL_SC_REMAP_CTRL_REG (0x1200)
> +#define SC_ITS_M3_INT_MUX_SEL_REG (0x21F0)
> +#define SC_TM_CLKEN0_REG (0x2050)
> +
> +#define SC_TM_CLKEN0_REG_VALUE (0x3)
> +#define SC_BROADCAST_EN_REG_VALUE (0x7)
> +#define SC_BROADCAST_SCLx_ADDRx_REG_VALUE0 (0x0)
> +#define SC_BROADCAST_SCLx_ADDRx_REG_VALUE1 (0x40016260)
> +#define SC_BROADCAST_SCLx_ADDRx_REG_VALUE2 (0x60016260)
> +#define SC_BROADCAST_SCLx_ADDRx_REG_VALUE3 (0x400)
> +#define SC_ITS_M3_INT_MUX_SEL_REG_VALUE (0x7)
> +#define PCIE_SUBCTRL_SC_REMAP_CTRL_REG_VALUE0 (0x0)
> +#define PCIE_SUBCTRL_SC_DISP_DAW_EN_REG_VALUE0 (0x27)
> +#define PCIE_SUBCTRL_SC_DISP_DAW_EN_REG_VALUE1 (0x2F)
> +#define PCIE_SUBCTRL_SC_DISP_DAW_EN_REG_VALUE2 (0x77)
> +#define PCIE_SUBCTRL_SC_DISPATCH_DAW_ARRAY3_REG_VALUE0 (0x178033)
> +#define PCIE_SUBCTRL_SC_DISPATCH_DAW_ARRAY4_REG_VALUE0 (0x17003c)
> +#define PCIE_SUBCTRL_SC_DISPATCH_DAW_ARRAY5_REG_VALUE0 (0x15003d)
> +#define PCIE_SUBCTRL_SC_DISPATCH_DAW_ARRAY5_REG_VALUE1 (0x170035)
> +#define PCIE_SUBCTRL_SC_DISPATCH_DAW_ARRAY6_REG_VALUE0 (0x16003e)
> +
> +VOID
> +QResetAp (
Hmm. No function definitions in header files please.
Move to .c file (and make STATIC).
> + VOID
> + )
> +{
> + MmioWrite64 (FixedPcdGet64 (PcdMailBoxAddress), 0x0);
> + (void)WriteBackInvalidateDataCacheRange (
VOID
> + (VOID *)FixedPcdGet64 (PcdMailBoxAddress),
> + 8
sizeof (UINT64)?
> + );
> +
> + //SCCL A
> + if (!PcdGet64 (PcdTrustedFirmwareEnable))
> + {
That { goes at the end of the previous line.
> + StartupAp ();
Hmm. At some point, we want to rename that function, to align with my
comments above.
> + }
> +}
> +
> +
> +EFI_STATUS
> +EFIAPI
> +EarlyConfigEntry (
No definitions in .h files. Move to .c file and make STATIC.
> + IN EFI_PEI_FILE_HANDLE FileHandle,
> + IN CONST EFI_PEI_SERVICES **PeiServices
> + )
> +{
> + DEBUG ((DEBUG_INFO,"SMMU CONFIG........."));
> + (VOID)SmmuConfigForBios ();
> + DEBUG ((DEBUG_INFO,"Done\n"));
> +
> + DEBUG ((DEBUG_INFO,"AP CONFIG........."));
> + (VOID)QResetAp ();
> + DEBUG ((DEBUG_INFO,"Done\n"));
> +
> + DEBUG ((DEBUG_INFO,"MN CONFIG........."));
> + (VOID)MN_CONFIG ();
> + DEBUG ((DEBUG_INFO,"Done\n"));
> +
> + return EFI_SUCCESS;
> +}
> +
> diff --git a/Platform/Hisilicon/D06/EarlyConfigPeim/EarlyConfigPeimD06.inf b/Platform/Hisilicon/D06/EarlyConfigPeim/EarlyConfigPeimD06.inf
> new file mode 100644
> index 0000000000..58ee5537c2
> --- /dev/null
> +++ b/Platform/Hisilicon/D06/EarlyConfigPeim/EarlyConfigPeimD06.inf
> @@ -0,0 +1,50 @@
> +#/** @file
> +#
> +# Copyright (c) 2018, Hisilicon Limited. All rights reserved.
> +# Copyright (c) 2017, Linaro Limited. All rights reserved.
> +#
> +# This program and the accompanying materials
> +# are licensed and made available under the terms and conditions of the BSD License
> +# which accompanies this distribution. The full text of the license may be found at
> +# http://opensource.org/licenses/bsd-license.php
> +#
> +# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> +# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
> +#
> +#**/
> +
> +
> +[Defines]
> + INF_VERSION = 0x0001001A
> + BASE_NAME = EarlyConfigPeimD06
> + FILE_GUID = FB8C65EB-0199-40C3-A82B-029921A9E9B3
> + MODULE_TYPE = PEIM
> + VERSION_STRING = 1.0
> + ENTRY_POINT = EarlyConfigEntry
> +
> +[Sources.common]
> + EarlyConfigPeimD06.c
> +
> +[Packages]
> + ArmPkg/ArmPkg.dec
> + MdeModulePkg/MdeModulePkg.dec
> + MdePkg/MdePkg.dec
> + Silicon/Hisilicon/HisiPkg.dec
> +
> +[LibraryClasses]
> + ArmLib
> + CacheMaintenanceLib
> + DebugLib
> + IoLib
> + PcdLib
> + PeimEntryPoint
> + PlatformSysCtrlLib
> +
> +[Pcd]
> + gHisiTokenSpaceGuid.PcdMailBoxAddress
> + gHisiTokenSpaceGuid.PcdTrustedFirmwareEnable
> + gHisiTokenSpaceGuid.PcdPeriSubctrlAddress
Swap previous two lines around.
/
Leif
> +
> +[Depex]
> +## As we will clean mailbox in this module, need to wait memory init complete
> + gEfiPeiMemoryDiscoveredPpiGuid
> --
> 2.17.0
>
next prev parent reply other threads:[~2018-08-04 9:59 UTC|newest]
Thread overview: 153+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-07-24 7:08 [PATCH edk2-platforms v1 00/38] Upload for D06 platform Ming Huang
2018-07-24 7:08 ` [PATCH edk2-platforms v1 01/38] Silicon/Hisilicon: Modify the MRC interface for other module Ming Huang
2018-08-02 14:42 ` Leif Lindholm
2018-08-05 3:35 ` Ming
2018-07-24 7:08 ` [PATCH edk2-platforms v1 02/38] Silicon/Hisilicon: Separate PlatformArch.h Ming Huang
2018-08-02 14:56 ` Leif Lindholm
2018-08-05 15:11 ` Ming
2018-07-24 7:08 ` [PATCH edk2-platforms v1 03/38] Hisilicon/D06: Add several basal file for D06 Ming Huang
2018-08-02 16:14 ` Leif Lindholm
2018-08-05 15:06 ` Ming
2018-08-06 3:01 ` Ming
2018-08-06 9:57 ` Leif Lindholm
2018-07-24 7:08 ` [PATCH edk2-platforms v1 04/38] Platform/Hisilicon/D06: Add M41T83RealTimeClockLib Ming Huang
2018-08-02 16:56 ` Leif Lindholm
2018-08-08 8:02 ` Ming
2018-08-08 9:12 ` Leif Lindholm
2018-07-24 7:08 ` [PATCH edk2-platforms v1 05/38] Platform/Hisilicon/D06: Add binary file for D06 Ming Huang
2018-08-02 17:05 ` Leif Lindholm
2018-08-07 15:04 ` Ming
2018-07-24 7:08 ` [PATCH edk2-platforms v1 06/38] Hisilicon/D06: Add OemMiscLibD06 Ming Huang
2018-08-02 17:22 ` Leif Lindholm
2018-08-08 3:49 ` Ming
2018-08-08 9:43 ` Leif Lindholm
2018-07-24 7:08 ` [PATCH edk2-platforms v1 07/38] Silicon/Hisilicon/D06: Wait for all disk ready Ming Huang
2018-08-02 17:36 ` Leif Lindholm
2018-08-08 9:02 ` Ming
2018-08-08 9:59 ` Leif Lindholm
2018-08-08 11:44 ` Ming
2018-08-08 12:53 ` Leif Lindholm
2018-08-10 1:44 ` Ming
2018-08-14 15:26 ` Leif Lindholm
2018-08-15 4:01 ` Ming
2018-08-15 13:12 ` Leif Lindholm
2018-07-24 7:08 ` [PATCH edk2-platforms v1 08/38] Silicon/Hisilicon/Acpi: Unify HisiAcipPlatformDxe Ming Huang
2018-08-02 17:39 ` Leif Lindholm
2018-07-24 7:08 ` [PATCH edk2-platforms v1 09/38] Hisilicon/D06: Add Debug Serial Port Init Driver Ming Huang
2018-08-02 18:10 ` Leif Lindholm
2018-08-08 7:37 ` Ming
2018-08-08 10:01 ` Leif Lindholm
2018-08-08 14:48 ` Ming
2018-07-24 7:08 ` [PATCH edk2-platforms v1 10/38] Hisilicon/D06: Add ACPI Tables for D06 Ming Huang
2018-08-02 18:13 ` Leif Lindholm
2018-08-02 18:24 ` Ard Biesheuvel
2018-07-24 7:08 ` [PATCH edk2-platforms v1 11/38] Hisilicon/D06: Add Hi1620OemConfigUiLib Ming Huang
2018-08-03 10:24 ` Leif Lindholm
2018-08-08 12:09 ` Ming
2018-08-11 6:35 ` Ming
2018-07-24 7:08 ` [PATCH edk2-platforms v1 12/38] Silicon/Hisilicon/D06: Stop watchdog Ming Huang
2018-08-03 10:28 ` Leif Lindholm
2018-08-08 9:49 ` Ming
2018-08-03 10:31 ` Ard Biesheuvel
2018-08-09 11:40 ` Ming
2018-08-09 11:53 ` Leif Lindholm
2018-07-24 7:08 ` [PATCH edk2-platforms v1 13/38] Silicon/Hisilicon/Acpi: Move some macro to PlatformArch.h Ming Huang
2018-08-03 10:37 ` Leif Lindholm
2018-08-08 12:22 ` Ming
2018-08-08 12:57 ` Leif Lindholm
2018-07-24 7:08 ` [PATCH edk2-platforms v1 14/38] Silicon/Hisilicon/D06: Fix I2C enable fail issue for D06 Ming Huang
2018-08-03 10:40 ` Leif Lindholm
2018-08-08 14:33 ` Ming
2018-07-24 7:08 ` [PATCH edk2-platforms v1 15/38] Silicon/Hisilicon/I2C: Optimize I2C library Ming Huang
2018-08-03 13:24 ` Leif Lindholm
2018-08-08 14:41 ` Ming
2018-07-24 7:09 ` [PATCH edk2-platforms v1 16/38] Silicon/Hisilicon/D06: Add I2C delay for HNS auto config Ming Huang
2018-08-03 13:28 ` Leif Lindholm
2018-08-09 3:59 ` Ming
2018-07-24 7:09 ` [PATCH edk2-platforms v1 17/38] Silicon/Hisilicon/D06: Optimize HNS config CDR post time Ming Huang
2018-08-03 13:30 ` Leif Lindholm
2018-08-08 14:54 ` Ming
2018-07-24 7:09 ` [PATCH edk2-platforms v1 18/38] Silicon/Hisilicon/Setup: Add Setup Item "EnableGOP" Ming Huang
2018-08-03 13:32 ` Leif Lindholm
2018-08-09 0:35 ` Ming
2018-07-24 7:09 ` [PATCH edk2-platforms v1 19/38] Hisilicon/Hi1620: Add ACPI PPTT table Ming Huang
2018-08-03 13:42 ` Leif Lindholm
2018-08-09 0:52 ` Ming
2018-07-24 7:09 ` [PATCH edk2-platforms v1 20/38] Platform/Hisilicon/D06: Enable ACPI PPTT Ming Huang
2018-08-03 13:43 ` Leif Lindholm
2018-07-24 7:09 ` [PATCH edk2-platforms v1 21/38] Silicon/Hisilicon/D0x: Move macro definition to PlatformArch.h Ming Huang
2018-08-03 13:44 ` Leif Lindholm
2018-07-24 7:09 ` [PATCH edk2-platforms v1 22/38] Platform/Hisilicon/D06: Add OemNicLib Ming Huang
2018-08-03 14:36 ` Leif Lindholm
2018-08-09 6:16 ` Ming
2018-08-09 10:19 ` Leif Lindholm
2018-08-09 14:41 ` Ming
2018-08-14 2:38 ` Ming
2018-08-14 15:48 ` Leif Lindholm
2018-08-15 11:08 ` Ming
2018-08-15 13:22 ` Leif Lindholm
2018-08-15 14:16 ` Ming
2018-07-24 7:09 ` [PATCH edk2-platforms v1 23/38] Hisilicon/D0X: Rename the global variable gDS3231RtcDevice Ming Huang
2018-08-03 15:20 ` Leif Lindholm
2018-08-09 6:22 ` Ming
2018-07-24 7:09 ` [PATCH edk2-platforms v1 24/38] Platform/Hisilicon/D06: Add OemNicConfig2P Driver Ming Huang
2018-08-03 15:23 ` Leif Lindholm
2018-08-09 6:24 ` Ming
2018-07-24 7:09 ` [PATCH edk2-platforms v1 25/38] Hisilicon/D0x: Update SMBIOS type9 info Ming Huang
2018-08-04 9:28 ` Leif Lindholm
2018-08-09 6:34 ` Ming
2018-07-24 7:09 ` [PATCH edk2-platforms v1 26/38] Silicon/Hisilicon/D0x: Move macro definition to PlatformArch.h Ming Huang
2018-08-04 9:34 ` Leif Lindholm
2018-08-09 6:37 ` Ming
2018-07-24 7:09 ` [PATCH edk2-platforms v1 27/38] Platform/Hisilicon/D06: Add EarlyConfigPeim peim Ming Huang
2018-08-04 9:59 ` Leif Lindholm [this message]
2018-08-09 7:07 ` Ming
2018-08-09 10:27 ` Leif Lindholm
2018-08-09 11:54 ` Ming
2018-08-14 2:31 ` Ming
2018-08-14 15:42 ` Leif Lindholm
2018-07-24 7:09 ` [PATCH edk2-platforms v1 28/38] Hisilicon/D0x: Unify FlashFvbDxe driver Ming Huang
2018-08-04 10:06 ` Leif Lindholm
2018-08-09 7:15 ` Ming
2018-07-24 7:09 ` [PATCH edk2-platforms v1 29/38] Platform/Hisilicon/D06: Add PciHostBridgeLib Ming Huang
2018-08-04 13:41 ` Leif Lindholm
2018-08-09 7:22 ` Ming
2018-07-24 7:09 ` [PATCH edk2-platforms v1 30/38] Hisilicon/D06: add apei driver Ming Huang
2018-08-04 14:47 ` Leif Lindholm
2018-08-10 2:46 ` Ming
2018-08-14 15:39 ` Leif Lindholm
2018-08-15 8:57 ` Ming
2018-07-24 7:09 ` [PATCH edk2-platforms v1 31/38] Silicon/Hisilicon/D06: Add some Lpc macro to LpcLib.h Ming Huang
2018-08-04 14:58 ` Leif Lindholm
2018-08-09 12:02 ` Ming
2018-07-24 7:09 ` [PATCH edk2-platforms v1 32/38] Platform/Hisilicon/D06: Add capsule upgrade support Ming Huang
2018-08-04 15:08 ` Leif Lindholm
2018-07-24 7:09 ` [PATCH edk2-platforms v1 33/38] Silicon/Hisilicon/D06: Modify for close slave core clock Ming Huang
2018-08-04 15:14 ` Leif Lindholm
2018-08-09 12:15 ` Ming
2018-08-09 12:27 ` Leif Lindholm
2018-08-10 2:05 ` Ming
2018-07-24 7:09 ` [PATCH edk2-platforms v1 34/38] Silicon/Hisilicon/D06: Add I2C Bus Exception deal function Ming Huang
2018-08-04 15:18 ` Leif Lindholm
2018-08-10 2:19 ` Ming
2018-07-24 7:09 ` [PATCH edk2-platforms v1 35/38] Silicon/Hisilicon/Setup: Support SPCR table switch Ming Huang
2018-08-04 15:20 ` Leif Lindholm
2018-08-09 14:17 ` Ming
2018-08-09 14:44 ` Leif Lindholm
2018-08-09 15:40 ` Ming
2018-08-09 15:48 ` Leif Lindholm
2018-07-24 7:09 ` [PATCH edk2-platforms v1 36/38] Silicon/Hisilicon/setup: Support SMMU switch Ming Huang
2018-08-06 9:59 ` Leif Lindholm
2018-08-09 14:19 ` Ming
2018-07-24 7:09 ` [PATCH edk2-platforms v1 37/38] Hisilicon/D06: Add PciPlatformLib Ming Huang
2018-08-06 10:01 ` Leif Lindholm
2018-08-09 14:27 ` Ming
2018-07-24 7:09 ` [PATCH edk2-platforms v1 38/38] Platform/Hisilicon/D0x: Update version string to 18.08 Ming Huang
2018-08-06 10:03 ` Leif Lindholm
2018-08-09 14:29 ` Ming
2018-08-01 21:56 ` [PATCH edk2-platforms v1 00/38] Upload for D06 platform Leif Lindholm
2018-08-02 1:46 ` Ming
2018-08-02 3:17 ` 答复: " Guoheyi
2018-08-02 10:12 ` Leif Lindholm
2018-08-02 15:36 ` Graeme Gregory
2018-08-04 14:26 ` Ming
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180804095934.7dgxsy6ne7squzz7@bivouac.eciton.net \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox