From: Leif Lindholm <leif.lindholm@linaro.org>
To: Ming Huang <ming.huang@linaro.org>
Cc: linaro-uefi@lists.linaro.org, edk2-devel@lists.01.org,
graeme.gregory@linaro.org, ard.biesheuvel@linaro.org,
guoheyi@huawei.com, wanghuiqiang@huawei.com,
huangming23@huawei.com, zhangjinsong2@huawei.com,
huangdaode@hisilicon.com, john.garry@huawei.com,
xinliang.liu@linaro.org, Heyi Guo <heyi.guo@linaro.org>
Subject: Re: [PATCH edk2-platforms v1 36/38] Silicon/Hisilicon/setup: Support SMMU switch
Date: Mon, 6 Aug 2018 10:59:59 +0100 [thread overview]
Message-ID: <20180806095959.c55sn5vszfix5pdy@bivouac.eciton.net> (raw)
In-Reply-To: <20180724070922.63362-37-ming.huang@linaro.org>
On Tue, Jul 24, 2018 at 03:09:20PM +0800, Ming Huang wrote:
> Select without SMMU iort while SMMU item is disable,
> Select with SMMU iort while SMMU item is enable.
>
> Contributed-under: TianoCore Contribution Agreement 1.1
> Signed-off-by: Ming Huang <ming.huang@linaro.org>
> Signed-off-by: Heyi Guo <heyi.guo@linaro.org>
> ---
> Silicon/Hisilicon/Drivers/HisiAcpiPlatformDxe/UpdateAcpiTable.c | 81 ++++++++++++++++++++
> 1 file changed, 81 insertions(+)
>
> diff --git a/Silicon/Hisilicon/Drivers/HisiAcpiPlatformDxe/UpdateAcpiTable.c b/Silicon/Hisilicon/Drivers/HisiAcpiPlatformDxe/UpdateAcpiTable.c
> index 32878ca4f9..4f0998dd24 100644
> --- a/Silicon/Hisilicon/Drivers/HisiAcpiPlatformDxe/UpdateAcpiTable.c
> +++ b/Silicon/Hisilicon/Drivers/HisiAcpiPlatformDxe/UpdateAcpiTable.c
> @@ -24,6 +24,83 @@
>
> #define CORECOUNT(X) ((X) * CORE_NUM_PER_SOCKET)
>
> +#define FIELD_IORT_NODE_OFFSET 40
> +
> +typedef enum {
> + NodeTypeIts = 0,
> + NodeTypeNameComponent,
> + NodeTypePciRC,
> + NodeTypeSmmuV1,
> + NodeTypeSmmuV3,
> + NodeTypePMCG
> +} IORT_NODE_TYPE;
> +
> +#pragma pack(1)
> +typedef struct {
> + UINT8 Type;
> + UINT16 Length;
> + UINT8 Revision;
> + UINT32 Reserved;
> + UINT32 IdMapNumber;
> + UINT32 IdArrayOffset;
> +} IORT_NODE_HEAD;
> +#pragma pack()
> +
> +BOOLEAN
> +IsIortWithSmmu (
> + IN EFI_ACPI_DESCRIPTION_HEADER *TableHeader
> + )
> +{
> + UINT32 *NodeOffset;
> + UINT32 NextOffset;
> + IORT_NODE_HEAD *Node;
> +
> + NodeOffset = (UINT32 *)((UINT8 *)TableHeader + FIELD_IORT_NODE_OFFSET);
> + NextOffset = *NodeOffset;
> +
> + while (NextOffset < TableHeader->Length) {
> + Node = (IORT_NODE_HEAD *)((UINT8 *)TableHeader + NextOffset);
> + NextOffset += Node->Length;
> +
> + if ((Node->Type == NodeTypeSmmuV1) || (Node->Type == NodeTypeSmmuV3)) {
> + return TRUE;
> + }
> + }
> +
> + return FALSE;
> +}
> +
> +EFI_STATUS
> +SelectIort (
> + IN EFI_ACPI_DESCRIPTION_HEADER *TableHeader
> + )
> +{
> + EFI_STATUS Status;
> + UINTN Size;
> + OEM_CONFIG_DATA Configuration;
> +
> + Configuration.EnableSmmu = 0;
> + Size = sizeof (OEM_CONFIG_DATA);
> + Status = gRT->GetVariable (OEM_CONFIG_NAME, &gOemConfigGuid, NULL, &Size, &Configuration);
Wrap long line.
> + if (EFI_ERROR (Status)) {
> + DEBUG ((DEBUG_ERROR, "Get OemConfig variable (%r).\n", Status));
> + }
> +
> + Status = EFI_SUCCESS;
> + if (IsIortWithSmmu (TableHeader)) {
> + if (!Configuration.EnableSmmu) {
> + Status = EFI_ABORTED;
> + }
> + } else {
> + if (Configuration.EnableSmmu) {
> + Status = EFI_ABORTED;
> + }
> + }
> + DEBUG ((DEBUG_INFO, "SmmuEnable=%x, return %r for Iort table.\n", Configuration.EnableSmmu, Status));
Wrap long line.
/
Leif
> +
> + return Status;
> +}
> +
> STATIC
> VOID
> RemoveUnusedMemoryNode (
> @@ -151,6 +228,10 @@ UpdateAcpiTable (
> case EFI_ACPI_6_0_SYSTEM_LOCALITY_INFORMATION_TABLE_SIGNATURE:
> Status = UpdateSlit (TableHeader);
> break;
> +
> + case EFI_ACPI_6_2_IO_REMAPPING_TABLE_SIGNATURE:
> + Status = SelectIort (TableHeader);
> + break;
> case EFI_ACPI_6_2_SERIAL_PORT_CONSOLE_REDIRECTION_TABLE_SIGNATURE:
> Status = IsNeedSpcr (TableHeader);
> break;
> --
> 2.17.0
>
next prev parent reply other threads:[~2018-08-06 10:00 UTC|newest]
Thread overview: 153+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-07-24 7:08 [PATCH edk2-platforms v1 00/38] Upload for D06 platform Ming Huang
2018-07-24 7:08 ` [PATCH edk2-platforms v1 01/38] Silicon/Hisilicon: Modify the MRC interface for other module Ming Huang
2018-08-02 14:42 ` Leif Lindholm
2018-08-05 3:35 ` Ming
2018-07-24 7:08 ` [PATCH edk2-platforms v1 02/38] Silicon/Hisilicon: Separate PlatformArch.h Ming Huang
2018-08-02 14:56 ` Leif Lindholm
2018-08-05 15:11 ` Ming
2018-07-24 7:08 ` [PATCH edk2-platforms v1 03/38] Hisilicon/D06: Add several basal file for D06 Ming Huang
2018-08-02 16:14 ` Leif Lindholm
2018-08-05 15:06 ` Ming
2018-08-06 3:01 ` Ming
2018-08-06 9:57 ` Leif Lindholm
2018-07-24 7:08 ` [PATCH edk2-platforms v1 04/38] Platform/Hisilicon/D06: Add M41T83RealTimeClockLib Ming Huang
2018-08-02 16:56 ` Leif Lindholm
2018-08-08 8:02 ` Ming
2018-08-08 9:12 ` Leif Lindholm
2018-07-24 7:08 ` [PATCH edk2-platforms v1 05/38] Platform/Hisilicon/D06: Add binary file for D06 Ming Huang
2018-08-02 17:05 ` Leif Lindholm
2018-08-07 15:04 ` Ming
2018-07-24 7:08 ` [PATCH edk2-platforms v1 06/38] Hisilicon/D06: Add OemMiscLibD06 Ming Huang
2018-08-02 17:22 ` Leif Lindholm
2018-08-08 3:49 ` Ming
2018-08-08 9:43 ` Leif Lindholm
2018-07-24 7:08 ` [PATCH edk2-platforms v1 07/38] Silicon/Hisilicon/D06: Wait for all disk ready Ming Huang
2018-08-02 17:36 ` Leif Lindholm
2018-08-08 9:02 ` Ming
2018-08-08 9:59 ` Leif Lindholm
2018-08-08 11:44 ` Ming
2018-08-08 12:53 ` Leif Lindholm
2018-08-10 1:44 ` Ming
2018-08-14 15:26 ` Leif Lindholm
2018-08-15 4:01 ` Ming
2018-08-15 13:12 ` Leif Lindholm
2018-07-24 7:08 ` [PATCH edk2-platforms v1 08/38] Silicon/Hisilicon/Acpi: Unify HisiAcipPlatformDxe Ming Huang
2018-08-02 17:39 ` Leif Lindholm
2018-07-24 7:08 ` [PATCH edk2-platforms v1 09/38] Hisilicon/D06: Add Debug Serial Port Init Driver Ming Huang
2018-08-02 18:10 ` Leif Lindholm
2018-08-08 7:37 ` Ming
2018-08-08 10:01 ` Leif Lindholm
2018-08-08 14:48 ` Ming
2018-07-24 7:08 ` [PATCH edk2-platforms v1 10/38] Hisilicon/D06: Add ACPI Tables for D06 Ming Huang
2018-08-02 18:13 ` Leif Lindholm
2018-08-02 18:24 ` Ard Biesheuvel
2018-07-24 7:08 ` [PATCH edk2-platforms v1 11/38] Hisilicon/D06: Add Hi1620OemConfigUiLib Ming Huang
2018-08-03 10:24 ` Leif Lindholm
2018-08-08 12:09 ` Ming
2018-08-11 6:35 ` Ming
2018-07-24 7:08 ` [PATCH edk2-platforms v1 12/38] Silicon/Hisilicon/D06: Stop watchdog Ming Huang
2018-08-03 10:28 ` Leif Lindholm
2018-08-08 9:49 ` Ming
2018-08-03 10:31 ` Ard Biesheuvel
2018-08-09 11:40 ` Ming
2018-08-09 11:53 ` Leif Lindholm
2018-07-24 7:08 ` [PATCH edk2-platforms v1 13/38] Silicon/Hisilicon/Acpi: Move some macro to PlatformArch.h Ming Huang
2018-08-03 10:37 ` Leif Lindholm
2018-08-08 12:22 ` Ming
2018-08-08 12:57 ` Leif Lindholm
2018-07-24 7:08 ` [PATCH edk2-platforms v1 14/38] Silicon/Hisilicon/D06: Fix I2C enable fail issue for D06 Ming Huang
2018-08-03 10:40 ` Leif Lindholm
2018-08-08 14:33 ` Ming
2018-07-24 7:08 ` [PATCH edk2-platforms v1 15/38] Silicon/Hisilicon/I2C: Optimize I2C library Ming Huang
2018-08-03 13:24 ` Leif Lindholm
2018-08-08 14:41 ` Ming
2018-07-24 7:09 ` [PATCH edk2-platforms v1 16/38] Silicon/Hisilicon/D06: Add I2C delay for HNS auto config Ming Huang
2018-08-03 13:28 ` Leif Lindholm
2018-08-09 3:59 ` Ming
2018-07-24 7:09 ` [PATCH edk2-platforms v1 17/38] Silicon/Hisilicon/D06: Optimize HNS config CDR post time Ming Huang
2018-08-03 13:30 ` Leif Lindholm
2018-08-08 14:54 ` Ming
2018-07-24 7:09 ` [PATCH edk2-platforms v1 18/38] Silicon/Hisilicon/Setup: Add Setup Item "EnableGOP" Ming Huang
2018-08-03 13:32 ` Leif Lindholm
2018-08-09 0:35 ` Ming
2018-07-24 7:09 ` [PATCH edk2-platforms v1 19/38] Hisilicon/Hi1620: Add ACPI PPTT table Ming Huang
2018-08-03 13:42 ` Leif Lindholm
2018-08-09 0:52 ` Ming
2018-07-24 7:09 ` [PATCH edk2-platforms v1 20/38] Platform/Hisilicon/D06: Enable ACPI PPTT Ming Huang
2018-08-03 13:43 ` Leif Lindholm
2018-07-24 7:09 ` [PATCH edk2-platforms v1 21/38] Silicon/Hisilicon/D0x: Move macro definition to PlatformArch.h Ming Huang
2018-08-03 13:44 ` Leif Lindholm
2018-07-24 7:09 ` [PATCH edk2-platforms v1 22/38] Platform/Hisilicon/D06: Add OemNicLib Ming Huang
2018-08-03 14:36 ` Leif Lindholm
2018-08-09 6:16 ` Ming
2018-08-09 10:19 ` Leif Lindholm
2018-08-09 14:41 ` Ming
2018-08-14 2:38 ` Ming
2018-08-14 15:48 ` Leif Lindholm
2018-08-15 11:08 ` Ming
2018-08-15 13:22 ` Leif Lindholm
2018-08-15 14:16 ` Ming
2018-07-24 7:09 ` [PATCH edk2-platforms v1 23/38] Hisilicon/D0X: Rename the global variable gDS3231RtcDevice Ming Huang
2018-08-03 15:20 ` Leif Lindholm
2018-08-09 6:22 ` Ming
2018-07-24 7:09 ` [PATCH edk2-platforms v1 24/38] Platform/Hisilicon/D06: Add OemNicConfig2P Driver Ming Huang
2018-08-03 15:23 ` Leif Lindholm
2018-08-09 6:24 ` Ming
2018-07-24 7:09 ` [PATCH edk2-platforms v1 25/38] Hisilicon/D0x: Update SMBIOS type9 info Ming Huang
2018-08-04 9:28 ` Leif Lindholm
2018-08-09 6:34 ` Ming
2018-07-24 7:09 ` [PATCH edk2-platforms v1 26/38] Silicon/Hisilicon/D0x: Move macro definition to PlatformArch.h Ming Huang
2018-08-04 9:34 ` Leif Lindholm
2018-08-09 6:37 ` Ming
2018-07-24 7:09 ` [PATCH edk2-platforms v1 27/38] Platform/Hisilicon/D06: Add EarlyConfigPeim peim Ming Huang
2018-08-04 9:59 ` Leif Lindholm
2018-08-09 7:07 ` Ming
2018-08-09 10:27 ` Leif Lindholm
2018-08-09 11:54 ` Ming
2018-08-14 2:31 ` Ming
2018-08-14 15:42 ` Leif Lindholm
2018-07-24 7:09 ` [PATCH edk2-platforms v1 28/38] Hisilicon/D0x: Unify FlashFvbDxe driver Ming Huang
2018-08-04 10:06 ` Leif Lindholm
2018-08-09 7:15 ` Ming
2018-07-24 7:09 ` [PATCH edk2-platforms v1 29/38] Platform/Hisilicon/D06: Add PciHostBridgeLib Ming Huang
2018-08-04 13:41 ` Leif Lindholm
2018-08-09 7:22 ` Ming
2018-07-24 7:09 ` [PATCH edk2-platforms v1 30/38] Hisilicon/D06: add apei driver Ming Huang
2018-08-04 14:47 ` Leif Lindholm
2018-08-10 2:46 ` Ming
2018-08-14 15:39 ` Leif Lindholm
2018-08-15 8:57 ` Ming
2018-07-24 7:09 ` [PATCH edk2-platforms v1 31/38] Silicon/Hisilicon/D06: Add some Lpc macro to LpcLib.h Ming Huang
2018-08-04 14:58 ` Leif Lindholm
2018-08-09 12:02 ` Ming
2018-07-24 7:09 ` [PATCH edk2-platforms v1 32/38] Platform/Hisilicon/D06: Add capsule upgrade support Ming Huang
2018-08-04 15:08 ` Leif Lindholm
2018-07-24 7:09 ` [PATCH edk2-platforms v1 33/38] Silicon/Hisilicon/D06: Modify for close slave core clock Ming Huang
2018-08-04 15:14 ` Leif Lindholm
2018-08-09 12:15 ` Ming
2018-08-09 12:27 ` Leif Lindholm
2018-08-10 2:05 ` Ming
2018-07-24 7:09 ` [PATCH edk2-platforms v1 34/38] Silicon/Hisilicon/D06: Add I2C Bus Exception deal function Ming Huang
2018-08-04 15:18 ` Leif Lindholm
2018-08-10 2:19 ` Ming
2018-07-24 7:09 ` [PATCH edk2-platforms v1 35/38] Silicon/Hisilicon/Setup: Support SPCR table switch Ming Huang
2018-08-04 15:20 ` Leif Lindholm
2018-08-09 14:17 ` Ming
2018-08-09 14:44 ` Leif Lindholm
2018-08-09 15:40 ` Ming
2018-08-09 15:48 ` Leif Lindholm
2018-07-24 7:09 ` [PATCH edk2-platforms v1 36/38] Silicon/Hisilicon/setup: Support SMMU switch Ming Huang
2018-08-06 9:59 ` Leif Lindholm [this message]
2018-08-09 14:19 ` Ming
2018-07-24 7:09 ` [PATCH edk2-platforms v1 37/38] Hisilicon/D06: Add PciPlatformLib Ming Huang
2018-08-06 10:01 ` Leif Lindholm
2018-08-09 14:27 ` Ming
2018-07-24 7:09 ` [PATCH edk2-platforms v1 38/38] Platform/Hisilicon/D0x: Update version string to 18.08 Ming Huang
2018-08-06 10:03 ` Leif Lindholm
2018-08-09 14:29 ` Ming
2018-08-01 21:56 ` [PATCH edk2-platforms v1 00/38] Upload for D06 platform Leif Lindholm
2018-08-02 1:46 ` Ming
2018-08-02 3:17 ` 答复: " Guoheyi
2018-08-02 10:12 ` Leif Lindholm
2018-08-02 15:36 ` Graeme Gregory
2018-08-04 14:26 ` Ming
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180806095959.c55sn5vszfix5pdy@bivouac.eciton.net \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox