[Patch 2/4] Vlv2TbltDevicePkg/Feature/Capsule: Add FmpDeviceLib instances

[Michael D Kinney <michael.d.kinney@intel.com>]

Cc: David Wei <david.wei@intel.com>
Cc: Mang Guo <mang.guo@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
---
 .../Capsule/Library/FmpDeviceLib/FmpDeviceLib.c    | 607 +++++++++++++++++++++
 .../Capsule/Library/FmpDeviceLib/FmpDeviceLib.inf  |  63 +++
 .../Library/FmpDeviceLibSample/FmpDeviceLib.c      | 429 +++++++++++++++
 .../Library/FmpDeviceLibSample/FmpDeviceLib.inf    |  51 ++
 4 files changed, 1150 insertions(+)
 create mode 100644 Vlv2TbltDevicePkg/Feature/Capsule/Library/FmpDeviceLib/FmpDeviceLib.c
 create mode 100644 Vlv2TbltDevicePkg/Feature/Capsule/Library/FmpDeviceLib/FmpDeviceLib.inf
 create mode 100644 Vlv2TbltDevicePkg/Feature/Capsule/Library/FmpDeviceLibSample/FmpDeviceLib.c
 create mode 100644 Vlv2TbltDevicePkg/Feature/Capsule/Library/FmpDeviceLibSample/FmpDeviceLib.inf

diff --git a/Vlv2TbltDevicePkg/Feature/Capsule/Library/FmpDeviceLib/FmpDeviceLib.c b/Vlv2TbltDevicePkg/Feature/Capsule/Library/FmpDeviceLib/FmpDeviceLib.c
new file mode 100644
index 0000000000..6725632664
--- /dev/null
+++ b/Vlv2TbltDevicePkg/Feature/Capsule/Library/FmpDeviceLib/FmpDeviceLib.c
@@ -0,0 +1,607 @@
+/**
+
+Copyright (c) 2016, Microsoft Corporation
+
+All rights reserved.
+Redistribution and use in source and binary forms, with or without
+modification, are permitted provided that the following conditions are met:
+1. Redistributions of source code must retain the above copyright notice,
+this list of conditions and the following disclaimer.
+2. Redistributions in binary form must reproduce the above copyright notice,
+this list of conditions and the following disclaimer in the documentation
+ and/or other materials provided with the distribution.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
+INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
+OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+**/
+
+#include <PiDxe.h>
+
+#include <Library/FmpDeviceLib.h>
+
+#include <Library/DebugLib.h>
+#include <Library/BaseLib.h>
+#include <Library/BaseMemoryLib.h>
+#include <Library/MemoryAllocationLib.h>
+#include <Library/UefiBootServicesTableLib.h>
+
+#include <Library/PlatformFlashAccessLib.h>
+
+//#include <Protocol/FirmwareManagement.h>
+
+//#include <Guid/SystemResourceTable.h>
+
+typedef struct {
+  PLATFORM_FIRMWARE_TYPE          FirmwareType;
+  FLASH_ADDRESS_TYPE              AddressType;
+  EFI_PHYSICAL_ADDRESS            BaseAddress;
+  UINTN                           Length;
+  UINTN                           ImageOffset;
+} UPDATE_CONFIG_DATA;
+
+UPDATE_CONFIG_DATA mUpdateConfigData[] = {
+  { PlatformFirmwareTypeSystemFirmware, FlashAddressTypeRelativeAddress, 0x00000000, 0x00040000, 0x00000000 },
+  { PlatformFirmwareTypeSystemFirmware, FlashAddressTypeRelativeAddress, 0x000C0000, 0x00050000, 0x000C0000 },
+  { PlatformFirmwareTypeSystemFirmware, FlashAddressTypeRelativeAddress, 0x00110000, 0x00210000, 0x00110000 },
+  { PlatformFirmwareTypeSystemFirmware, FlashAddressTypeRelativeAddress, 0x00320000, 0x00070000, 0x00320000 },
+  { PlatformFirmwareTypeSystemFirmware, FlashAddressTypeRelativeAddress, 0x00390000, 0x00070000, 0x00390000 },
+  { PlatformFirmwareTypeNvRam,          FlashAddressTypeRelativeAddress, 0x00040000, 0x00080000, 0x00040000 }
+};
+
+/**
+  Used to pass the FMP install function to this lib.  This allows the library to
+  have control of the handle that the FMP instance is installed on.  This allows
+  the library to use DriverBinding protocol model to locate its device(s) in the
+  system.
+
+  @param[in] Func  Function pointer to FMP install function.
+
+  @retval EFI_SUCCESS       Library has saved function pointer and will call
+                            function pointer on each DriverBinding Start.
+  @retval EFI_UNSUPPORTED   Library doesn't use driver binding and only supports
+                            a single instance.
+  @retval other error       Error occurred.  Don't install FMP
+
+**/
+EFI_STATUS
+EFIAPI
+RegisterFmpInstaller (
+  IN FMP_DEVICE_LIB_REGISTER_FMP_INSTALLER Func
+  )
+{
+  //
+  // This is a system firmware update that does not use Driver Binding Protocol
+  //
+  return EFI_UNSUPPORTED;
+}
+
+
+/**
+  Returns the size, in bytes, of the firmware image currently stored in the
+  firmware device.  This function is used to by the GetImage() and
+  GetImageInfo() services of the Firmware Management Protocol.  If the image
+  size can not be determined from the firmware device, then 0 must be returned.
+
+  @param[out] Size  Pointer to the size, in bytes, of the firmware image
+                    currently stored in the firmware device.
+
+  @retval EFI_SUCCESS            The size of the firmware image currently
+                                 stored in the firmware device was returned.
+  @retval EFI_INVALID_PARAMETER  Size is NULL.
+  @retval EFI_UNSUPPORTED        The firmware device does not support reporting
+                                 the size of the currently stored firmware image.
+  @retval EFI_DEVICE_ERROR       An error occured attempting to determine the
+                                 size of the firmware image currently stored in
+                                 in the firmware device.
+
+**/
+EFI_STATUS
+EFIAPI
+FmpDeviceGetSize (
+  IN UINTN  *Size
+  )
+{
+  if (Size == NULL) {
+    return EFI_INVALID_PARAMETER;
+  }
+  *Size = PcdGet32 (PcdBiosRomBase);
+  return EFI_SUCCESS;
+}
+
+/**
+  Used to return a library supplied guid that will be the ImageTypeId guid of
+  the FMP descriptor.  This is optional but can be used if at runtime the guid
+  needs to be determined.
+
+  @param[out] Guid  Double Guid Ptr that will be updated to point to guid.
+                    This should be from static memory and will not be freed.
+
+  @return EFI_UNSUPPORTED  Library instance doesn't need dynamic guid.
+  @return Error            Any error will cause the wrapper to use the GUID
+                           defined by PCD.
+  @return EFI_SUCCESS      Guid ptr should be updated to point to static memeory
+                           which contains a valid guid.
+
+**/
+EFI_STATUS
+EFIAPI
+FmpDeviceGetImageTypeIdGuidPtr (
+  OUT EFI_GUID  **Guid
+  )
+{
+  return EFI_UNSUPPORTED;
+}
+
+/**
+  Returns values used to fill in the AttributesSupported and AttributesSettings
+  fields of the EFI_FIRMWARE_IMAGE_DESCRIPTOR structure that is returned by the
+  GetImageInfo() service of the Firmware Management Protocol.  The following
+  bit values from the Firmware Management Protocol may be combined:
+    IMAGE_ATTRIBUTE_IMAGE_UPDATABLE
+    IMAGE_ATTRIBUTE_RESET_REQUIRED
+    IMAGE_ATTRIBUTE_AUTHENTICATION_REQUIRED
+    IMAGE_ATTRIBUTE_IN_USE
+    IMAGE_ATTRIBUTE_UEFI_IMAGE
+
+  @param[out] Supported  Attributes supported by this firmware device.
+  @param[out] Setting    Attributes settings for this firmware device.
+
+  @retval EFI_SUCCESS            The attributes supported by the firmware
+                                 device were returned.
+  @retval EFI_INVALID_PARAMETER  Supported is NULL.
+  @retval EFI_INVALID_PARAMETER  Setting is NULL.
+
+**/
+EFI_STATUS
+EFIAPI
+FmpDeviceGetAttributes (
+  IN OUT UINT64  *Supported,
+  IN OUT UINT64  *Setting
+  )
+{
+  if (Supported == NULL || Setting == NULL) {
+    return EFI_INVALID_PARAMETER;
+  }
+  *Supported = (IMAGE_ATTRIBUTE_IMAGE_UPDATABLE         |
+                IMAGE_ATTRIBUTE_RESET_REQUIRED          |
+                IMAGE_ATTRIBUTE_AUTHENTICATION_REQUIRED |
+                IMAGE_ATTRIBUTE_IN_USE
+                );
+  *Setting   = (IMAGE_ATTRIBUTE_IMAGE_UPDATABLE         |
+                IMAGE_ATTRIBUTE_RESET_REQUIRED          |
+                IMAGE_ATTRIBUTE_AUTHENTICATION_REQUIRED |
+                IMAGE_ATTRIBUTE_IN_USE
+                );
+  return EFI_SUCCESS;
+}
+
+/**
+  Gets the current Lowest Supported Version.
+
+  This is a protection mechanism so that a previous version with known issue is
+  not applied.  ONLY implement this if your running firmware has a method to
+  return this at runtime.  If EFI_UNSUPPORTED is returned, then the Lowest
+  Supported Version is stored in a UEFI Variable.
+
+  @param[out] Version  On return this value represents the current Lowest
+                       Supported Version (in same format as GetVersion).
+
+  @retval EFI_SUCCESS       The Lowest Supported Version was correctly retrieved
+  @retval EFI_UNSUPPORTED   Device firmware doesn't support reporting LSV
+  @retval EFI_DEVICE_ERROR  Error occurred when trying to get the LSV
+**/
+EFI_STATUS
+EFIAPI
+FmpDeviceGetLowestSupportedVersion (
+  IN OUT UINT32  *LowestSupportedVersion
+  )
+{
+  //
+  // Retrieve the lowest support version from a PCD
+  // NOTE: This method of using a PCD can only be used for the system firmware
+  //       FMP instance that is updated every time the system firmware is
+  //       updated.  If system firmware updates support partial updates that
+  //       would not include the system firmware FMP instance, then a PCD can
+  //       not be used and the value must come from the currently running system
+  //       firmware image.
+  //
+  *LowestSupportedVersion = PcdGet32 (PcdSystemFirmwareFmpLowestSupportedVersion);
+  return EFI_SUCCESS;
+}
+
+
+/**
+  Returns the Null-terminated Unicode string that is used to fill in the
+  VersionName field of the EFI_FIRMWARE_IMAGE_DESCRIPTOR structure that is
+  returned by the GetImageInfo() service of the Firmware Management Protocol.
+  The returned string must be allocated using EFI_BOOT_SERVICES.AllocatePool().
+
+  @note It is recommended that all firmware devices support a method to report
+        the VersionName string from the currently stored firmware image.
+
+  @param[out] VersionString  The version string retrieved from the currently
+                             stored firmware image.
+
+  @retval EFI_SUCCESS            The version string of currently stored
+                                 firmware image was returned in Version.
+  @retval EFI_INVALID_PARAMETER  VersionString is NULL.
+  @retval EFI_UNSUPPORTED        The firmware device does not support a method
+                                 to report the version string of the currently
+                                 stored firmware image.
+  @retval EFI_DEVICE_ERROR       An error occurred attempting to retrieve the
+                                 version string of the currently stored
+                                 firmware image.
+  @retval EFI_OUT_OF_RESOURCES   There are not enough resources to allocate the
+                                 buffer for the version string of the currently
+                                 stored firmware image.
+
+**/
+EFI_STATUS
+EFIAPI
+FmpDeviceGetVersionString (
+  OUT CHAR16  **VersionString
+  )
+{
+  if (VersionString == NULL) {
+    return EFI_INVALID_PARAMETER;
+  }
+
+  //
+  // Retrieve the version string from a PCD
+  // NOTE: This method of using a PCD can only be used for the system firmware
+  //       FMP instance that is updated every time the system firmware is
+  //       updated.  If system firmware updates support partial updates that
+  //       would not include the system firmware FMP instance, then a PCD can
+  //       not be used and the value must come from the currently running system
+  //       firmware image.
+  //
+  *VersionString = (CHAR16 *)AllocateCopyPool (
+                               PcdGetSize (PcdSystemFirmwareFmpVersionString),
+                               PcdGetPtr (PcdSystemFirmwareFmpVersionString)
+                               );
+  if (*VersionString == NULL) {
+    return EFI_OUT_OF_RESOURCES;
+  }
+  return EFI_SUCCESS;
+}
+
+/**
+  Gets the current running version.
+
+  ONLY implement this if your running firmware has a method to return this at
+  runtime.
+
+  @param[out] Version  On return this value represents the current running
+                       version.
+
+  @retval EFI_SUCCESS       The version was correctly retrieved.
+  @retval EFI_UNSUPPORTED   Device firmware doesn't support reporting current
+                            version.
+  @retval EFI_DEVICE_ERROR  Error occurred when trying to get the version.
+**/
+EFI_STATUS
+EFIAPI
+FmpDeviceGetVersion (
+  IN OUT UINT32  *Version
+  )
+{
+  //
+  // Retrieve the version string from a PCD
+  // NOTE: This method of using a PCD can only be used for the system firmware
+  //       FMP instance that is updated every time the system firmware is
+  //       updated.  If system firmware updates support partial updates that
+  //       would not include the system firmware FMP instance, then a PCD can
+  //       not be used and the value must come from the currently running system
+  //       firmware image.
+  //
+  *Version = PcdGet32 (PcdSystemFirmwareFmpVersion);
+  return EFI_SUCCESS;
+}
+
+
+/**
+  Retrieves a copy of the current firmware image of the device.
+
+  This function allows a copy of the current firmware image to be created and
+  saved.  The saved copy could later been used, for example, in firmware image
+  recovery or rollback.
+
+  @param[out] Image      Points to the buffer where the current image is copied
+                         to.
+  @param[out] ImageSize  On entry, points to the size of the buffer pointed to
+                         by Image, in bytes.  On return, points to the length of
+                         the image, in bytes.
+
+  @retval EFI_SUCCESS            The image was successfully read from the device.
+  @retval EFI_BUFFER_TOO_SMALL   The buffer specified by ImageSize is too small
+                                 to hold the image. The current buffer size
+                                 needed to hold the image is returned in
+                                 ImageSize.
+  @retval EFI_INVALID_PARAMETER  The Image was NULL.
+  @retval EFI_NOT_FOUND          The current image is not copied to the buffer.
+  @retval EFI_UNSUPPORTED        The operation is not supported.
+
+**/
+EFI_STATUS
+EFIAPI
+FmpDeviceGetImage (
+  IN OUT VOID   *Image,
+  IN OUT UINTN  *ImageSize
+  )
+{
+  //
+  // Check for invalid p;arameters
+  //
+  if (Image == NULL || ImageSize == NULL) {
+    return EFI_INVALID_PARAMETER;
+  }
+
+  //
+  // Make sure the buffer is big enough to hold the device image
+  //
+  if (*ImageSize < PcdGet32 (PcdBiosRomSize)) {
+    *ImageSize = PcdGet32 (PcdBiosRomSize);
+    return EFI_BUFFER_TOO_SMALL;
+  }
+
+  //
+  // Copy the device image to the buffer
+  //
+  *ImageSize = PcdGet32 (PcdBiosRomSize);
+  CopyMem (
+    Image,
+    (VOID *)(UINTN)PcdGet32 (PcdBiosRomBase),
+    *ImageSize
+    );
+
+  return EFI_SUCCESS;
+}
+
+/**
+  Updates the firmware image of the device.
+
+  This function updates the hardware with the new firmware image.  This function
+  returns EFI_UNSUPPORTED if the firmware image is not updatable.  If the
+  firmware image is updatable, the function should perform the following minimal
+  validations before proceeding to do the firmware image update.
+    - Validate the image is a supported image for this device.  The function
+      returns EFI_ABORTED if the image is unsupported.  The function can
+      optionally provide more detailed information on why the image is not a
+      supported image.
+    - Validate the data from VendorCode if not null.  Image validation must be
+      performed before VendorCode data validation.  VendorCode data is ignored
+      or considered invalid if image validation failed.  The function returns
+      EFI_ABORTED if the data is invalid.
+
+  VendorCode enables vendor to implement vendor-specific firmware image update
+  policy.  Null if the caller did not specify the policy or use the default
+  policy.  As an example, vendor can implement a policy to allow an option to
+  force a firmware image update when the abort reason is due to the new firmware
+  image version is older than the current firmware image version or bad image
+  checksum.  Sensitive operations such as those wiping the entire firmware image
+  and render the device to be non-functional should be encoded in the image
+  itself rather than passed with the VendorCode.  AbortReason enables vendor to
+  have the option to provide a more detailed description of the abort reason to
+  the caller.
+
+  @param[in]  Image             Points to the new image.
+  @param[in]  ImageSize         Size of the new image in bytes.
+  @param[in]  VendorCode        This enables vendor to implement vendor-specific
+                                firmware image update policy. Null indicates the
+                                caller did not specify the policy or use the
+                                default policy.
+  @param[in]  Progress          A function used by the driver to report the
+                                progress of the firmware update.
+  @param[in]  CapsuleFwVersion  FMP Payload Header version of the image.
+  @param[out] AbortReason       A pointer to a pointer to a null-terminated
+                                string providing more details for the aborted
+                                operation. The buffer is allocated by this
+                                function with AllocatePool(), and it is the
+                                caller's responsibility to free it with a call
+                                to FreePool().
+
+  @retval EFI_SUCCESS            The device was successfully updated with the
+                                 new image.
+  @retval EFI_ABORTED            The operation is aborted.
+  @retval EFI_INVALID_PARAMETER  The Image was NULL.
+  @retval EFI_UNSUPPORTED        The operation is not supported.
+
+**/
+EFI_STATUS
+EFIAPI
+FmpDeviceSetImage (
+  IN  CONST VOID                                     *Image,
+  IN  UINTN                                          ImageSize,
+  IN  CONST VOID                                     *VendorCode,
+  IN  EFI_FIRMWARE_MANAGEMENT_UPDATE_IMAGE_PROGRESS  Progress,
+  IN  UINT32                                         CapsuleFwVersion,
+  OUT CHAR16                                         **AbortReason
+  )
+{
+  EFI_STATUS          Status;
+  UINT32              Updateable;
+  UINTN               Percentage;
+  UINTN               Index;
+  UPDATE_CONFIG_DATA  *ConfigData;
+  UINTN               TotalSize;
+  UINTN               BytesWritten;
+
+  Updateable = 0;
+  Status = FmpDeviceCheckImage (Image, ImageSize, &Updateable);
+  if (EFI_ERROR (Status)) {
+    DEBUG((DEBUG_ERROR, "FmpDeviceSetImage - Check Image failed with %r.\n", Status));
+    return Status;
+  }
+
+  if (Updateable != IMAGE_UPDATABLE_VALID) {
+    DEBUG((DEBUG_ERROR, "FmpDeviceSetImage - Check Image returned that the Image was not valid for update.  Updatable value = 0x%X.\n", Updateable));
+    return EFI_ABORTED;
+  }
+
+  if (Progress == NULL) {
+    DEBUG((DEBUG_ERROR, "FmpDeviceSetImage - Invalid progress callback\n"));
+    return EFI_INVALID_PARAMETER;
+  }
+
+  Status = Progress (15);
+  if (EFI_ERROR (Status)) {
+    DEBUG((DEBUG_ERROR, "FmpDeviceSetImage - Progress Callback failed with Status %r.\n", Status));
+  }
+
+  //
+  // Write the image to the firmware device
+  //
+  Progress (20);
+  if (EFI_ERROR (Status)) {
+    DEBUG((DEBUG_ERROR, "FmpDeviceSetImage - Progress Callback failed with Status %r.\n", Status));
+  }
+
+  //
+  // Simulate update with delays between progress updates
+  //
+  for (Percentage = 20; Percentage <= 100; Percentage++) {
+    //
+    // Wait 0.05 seconds
+    //
+//    gBS->Stall (50000);
+
+//    Progress (Percentage);
+//    if (EFI_ERROR (Status)) {
+//      DEBUG((DEBUG_ERROR, "FmpDeviceSetImage - Progress Callback failed with Status %r.\n", Status));
+//    }
+  }
+
+  DEBUG ((DEBUG_INFO, "FmpDeviceSetImage - %d Images ...\n", ARRAY_SIZE (mUpdateConfigData)));
+
+  if (ARRAY_SIZE (mUpdateConfigData) == 0) {
+    DEBUG((DEBUG_INFO, "PlatformUpdate: BaseAddress - 0x%lx ImageOffset - 0x%x Length - 0x%x\n", 0, 0, ImageSize));
+    Status = PerformFlashWriteWithProgress (
+               PlatformFirmwareTypeSystemFirmware,  // FirmwareType
+               0x00000000,                          // FlashAddress
+               FlashAddressTypeRelativeAddress,     // FlashAddressType
+               (VOID *)(UINTN)Image,                // Buffer
+               ImageSize,                           // BufferLength
+               Progress,                            // Progress
+               20,                                  // StartPercentage
+               100                                  // EndPercentage
+               );
+  }
+
+
+  //
+  // Compute total size of update
+  //
+  for (Index = 0, TotalSize = 0; Index < ARRAY_SIZE (mUpdateConfigData); Index++) {
+    TotalSize += mUpdateConfigData[Index].Length;
+  }
+
+  BytesWritten = 0;
+  for (Index = 0, ConfigData = mUpdateConfigData; Index < ARRAY_SIZE (mUpdateConfigData); Index++, ConfigData++) {
+    DEBUG((DEBUG_INFO, "PlatformUpdate(%d): BaseAddress - 0x%lx ImageOffset - 0x%x Length - 0x%x\n",
+      Index,
+      ConfigData->BaseAddress,
+      ConfigData->ImageOffset,
+      ConfigData->Length
+      ));
+    Status = PerformFlashWriteWithProgress (
+               ConfigData->FirmwareType,                                     // FirmwareType
+               ConfigData->BaseAddress,                                      // FlashAddress
+               ConfigData->AddressType,                                      // FlashAddressType
+               (VOID *)((UINTN)Image + (UINTN)ConfigData->ImageOffset),      // Buffer
+               ConfigData->Length,                                           // BufferLength
+               Progress,                                                     // Progress
+               20 + (BytesWritten * 80) / TotalSize,                         // StartPercentage
+               20 + ((BytesWritten + ConfigData->Length) * 80) / TotalSize   // EndPercentage
+               );
+    if (EFI_ERROR(Status)) {
+      break;
+    }
+    BytesWritten += ConfigData->Length;
+  }
+
+  DEBUG ((DEBUG_INFO, "FmpDeviceSetImage - %r\n", Status));
+
+  return Status;
+}
+
+/**
+Checks if the firmware image is valid for the device.
+
+This function allows firmware update application to validate the firmware image without
+invoking the SetImage() first.
+
+@param[in]  Image              Points to the new image.
+@param[in]  ImageSize          Size of the new image in bytes.
+@param[out] ImageUpdatable     Indicates if the new image is valid for update. It also provides,
+if available, additional information if the image is invalid.
+
+@retval EFI_SUCCESS            The image was successfully checked.
+@retval EFI_INVALID_PARAMETER  The Image was NULL.
+
+**/
+EFI_STATUS
+EFIAPI
+FmpDeviceCheckImage (
+  IN  CONST VOID  *Image,
+  IN  UINTN       ImageSize,
+  OUT UINT32      *ImageUpdateable
+  )
+{
+  if (ImageUpdateable == NULL) {
+    DEBUG((DEBUG_ERROR, "CheckImage - ImageUpdateable Pointer Parameter is NULL.\n"));
+    return EFI_INVALID_PARAMETER;
+  }
+
+  //
+  //Set to valid and then if any tests fail it will update this flag.
+  //
+  *ImageUpdateable = IMAGE_UPDATABLE_VALID;
+
+  if (Image == NULL) {
+    DEBUG((DEBUG_ERROR, "CheckImage - Image Pointer Parameter is NULL.\n"));
+    //
+    // Not sure if this is needed
+    //
+    *ImageUpdateable = IMAGE_UPDATABLE_INVALID;
+    return EFI_INVALID_PARAMETER;
+  }
+
+  //
+  // Make sure the image size is correct
+  //
+  if (ImageSize != PcdGet32 (PcdBiosRomSize)) {
+    *ImageUpdateable = IMAGE_UPDATABLE_INVALID;
+    return EFI_INVALID_PARAMETER;
+  }
+
+  return EFI_SUCCESS;
+}
+
+/**
+  Device firmware should trigger lock mechanism so that device fw can not be
+  updated or tampered with. This lock mechanism is generally only cleared by a
+  full system reset (not just sleep state/low power mode)
+
+  @retval EFI_SUCCESS           The device was successfully locked.
+  @retval EFI_UNSUPPORTED       The hardware device/firmware doesn't support locking
+
+**/
+EFI_STATUS
+EFIAPI
+FmpDeviceLock (
+  VOID
+  )
+{
+  DEBUG ((DEBUG_INFO, "VLV2: FmpDeviceLock() for system FLASH\n"));
+  // TODO: Add lock logic
+  return EFI_UNSUPPORTED;
+}
diff --git a/Vlv2TbltDevicePkg/Feature/Capsule/Library/FmpDeviceLib/FmpDeviceLib.inf b/Vlv2TbltDevicePkg/Feature/Capsule/Library/FmpDeviceLib/FmpDeviceLib.inf
new file mode 100644
index 0000000000..af4eabf0ad
--- /dev/null
+++ b/Vlv2TbltDevicePkg/Feature/Capsule/Library/FmpDeviceLib/FmpDeviceLib.inf
@@ -0,0 +1,63 @@
+##
+# Copyright (c) 2016, Microsoft Corporation
+
+# All rights reserved.
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+# 1. Redistributions of source code must retain the above copyright notice,
+# this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright notice,
+# this list of conditions and the following disclaimer in the documentation
+# and/or other materials provided with the distribution.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+# ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+# WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+# IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
+# INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+# LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
+# OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+##
+
+
+[Defines]
+  INF_VERSION                    = 0x00010005
+  BASE_NAME                      = Vlv2FmpDeviceLib
+  FILE_GUID                      = 83723F51-39B5-4D99-A974-90132AB55F83
+  MODULE_TYPE                    = DXE_DRIVER
+  VERSION_STRING                 = 1.0
+  LIBRARY_CLASS                  = FmpDeviceLib|DXE_DRIVER
+
+#
+# The following information is for reference only and not required by the build tools.
+#
+#  VALID_ARCHITECTURES           = IA32 X64
+#
+
+[Sources]
+  FmpDeviceLib.c
+
+[Packages]
+  MdePkg/MdePkg.dec
+  FmpDevicePkg/FmpDevicePkg.dec
+  SignedCapsulePkg/SignedCapsulePkg.dec
+  Vlv2TbltDevicePkg/PlatformPkg.dec
+
+[LibraryClasses]
+  DebugLib
+  BaseLib
+  BaseMemoryLib
+  MemoryAllocationLib
+  UefiBootServicesTableLib
+  PlatformFlashAccessLib
+
+[Pcd]
+  gPlatformModuleTokenSpaceGuid.PcdBiosRomBase
+  gPlatformModuleTokenSpaceGuid.PcdBiosRomSize
+  gPlatformModuleTokenSpaceGuid.PcdSystemFirmwareFmpLowestSupportedVersion
+  gPlatformModuleTokenSpaceGuid.PcdSystemFirmwareFmpVersion
+  gPlatformModuleTokenSpaceGuid.PcdSystemFirmwareFmpVersionString
+
diff --git a/Vlv2TbltDevicePkg/Feature/Capsule/Library/FmpDeviceLibSample/FmpDeviceLib.c b/Vlv2TbltDevicePkg/Feature/Capsule/Library/FmpDeviceLibSample/FmpDeviceLib.c
new file mode 100644
index 0000000000..19a152bfc5
--- /dev/null
+++ b/Vlv2TbltDevicePkg/Feature/Capsule/Library/FmpDeviceLibSample/FmpDeviceLib.c
@@ -0,0 +1,429 @@
+/**
+
+Copyright (c) 2016, Microsoft Corporation
+
+All rights reserved.
+Redistribution and use in source and binary forms, with or without
+modification, are permitted provided that the following conditions are met:
+1. Redistributions of source code must retain the above copyright notice,
+this list of conditions and the following disclaimer.
+2. Redistributions in binary form must reproduce the above copyright notice,
+this list of conditions and the following disclaimer in the documentation
+ and/or other materials provided with the distribution.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
+INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
+OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+**/
+
+
+#include <PiDxe.h>
+#include <Library/DebugLib.h>
+#include <Protocol/FirmwareManagement.h>
+#include <Library/BaseLib.h>
+#include <Library/MemoryAllocationLib.h>
+#include <Library/BaseMemoryLib.h>
+#include <Library/FmpDeviceLib.h>
+#include <Library/UefiBootServicesTableLib.h>
+
+/**
+  Used to pass the FMP install function to this lib.
+  This allows the library to have control of the handle
+  that the FMP instance is installed on.  This allows the library
+  to use DriverBinding protocol model to locate its device(s) in the
+  system.
+
+  @param[in]  Function pointer to FMP install function.
+
+  @retval EFI_SUCCESS      Library has saved function pointer and will call function pointer on each DriverBinding Start.
+  @retval EFI_UNSUPPORTED  Library doesn't use driver binding and only supports a single instance.
+  @retval other error      Error occurred.  Don't install FMP
+
+**/
+EFI_STATUS
+EFIAPI
+RegisterFmpInstaller(
+IN FMP_DEVICE_LIB_REGISTER_FMP_INSTALLER Func
+)
+{
+  // Because this is a sample lib with very simple fake device we don't use
+  // the driverbinding protocol to locate our device.
+  //
+  return EFI_UNSUPPORTED;
+}
+
+
+/**
+Used to get the size of the image in bytes.
+NOTE - Do not return zero as that will identify the device as
+not updatable.
+
+@retval UINTN that represents the size of the firmware.
+
+**/
+EFI_STATUS
+EFIAPI
+FmpDeviceGetSize (
+  IN UINTN  *Size
+  )
+{
+  if (Size == NULL) {
+    return EFI_INVALID_PARAMETER;
+  }
+  *Size = 0x1000;
+  return EFI_SUCCESS;
+}
+
+/**
+Used to return a library supplied guid that will be the ImageTypeId guid of the FMP descriptor.
+This is optional but can be used if at runtime the guid needs to be determined.
+
+@param  Guid:  Double Guid Ptr that will be updated to point to guid.  This should be from static memory
+and will not be freed.
+@return EFI_UNSUPPORTED: if you library instance doesn't need dynamic guid return this.
+@return Error: Any error will cause the wrapper to use the GUID defined by PCD
+@return EFI_SUCCESS:  Guid ptr should be updated to point to static memeory which contains a valid guid
+**/
+EFI_STATUS
+EFIAPI
+FmpDeviceGetImageTypeIdGuidPtr(
+  OUT EFI_GUID** Guid)
+{
+  //this instance doesn't need dynamic guid detection.
+  return EFI_UNSUPPORTED;
+}
+
+/**
+  Returns values used to fill in the AttributesSupported and AttributesSettings
+  fields of the EFI_FIRMWARE_IMAGE_DESCRIPTOR structure that is returned by the
+  GetImageInfo() service of the Firmware Management Protocol.  The following
+  bit values from the Firmware Management Protocol may be combined:
+    IMAGE_ATTRIBUTE_IMAGE_UPDATABLE
+    IMAGE_ATTRIBUTE_RESET_REQUIRED
+    IMAGE_ATTRIBUTE_AUTHENTICATION_REQUIRED
+    IMAGE_ATTRIBUTE_IN_USE
+    IMAGE_ATTRIBUTE_UEFI_IMAGE
+
+  @param[out] Supported  Attributes supported by this firmware device.
+  @param[out] Setting    Attributes settings for this firmware device.
+
+  @retval EFI_SUCCESS            The attributes supported by the firmware
+                                 device were returned.
+  @retval EFI_INVALID_PARAMETER  Supported is NULL.
+  @retval EFI_INVALID_PARAMETER  Setting is NULL.
+
+**/
+EFI_STATUS
+EFIAPI
+FmpDeviceGetAttributes (
+  IN OUT UINT64  *Supported,
+  IN OUT UINT64  *Setting
+  )
+{
+  if (Supported == NULL || Setting == NULL) {
+    return EFI_INVALID_PARAMETER;
+  }
+  *Supported = (IMAGE_ATTRIBUTE_IMAGE_UPDATABLE | IMAGE_ATTRIBUTE_IN_USE);
+  *Setting   = (IMAGE_ATTRIBUTE_IMAGE_UPDATABLE | IMAGE_ATTRIBUTE_IN_USE);
+  return EFI_SUCCESS;
+}
+
+/**
+Gets the current Lowest Supported Version.
+This is a protection mechanism so that a previous version with known issue is not
+applied.
+
+ONLY implement this if your running firmware has a method to return this at runtime.
+
+@param[out] Version           On return this value represents the
+current Lowest Supported Version (in same format as GetVersion).
+
+@retval EFI_SUCCESS           The Lowest Supported Version was correctly retrieved
+@retval EFI_UNSUPPORTED       Device firmware doesn't support reporting LSV
+@retval EFI_DEVICE_ERROR      Error occurred when trying to get the LSV
+**/
+EFI_STATUS
+EFIAPI
+FmpDeviceGetLowestSupportedVersion (
+  IN OUT UINT32* LowestSupportedVersion
+  )
+{
+  return EFI_UNSUPPORTED;
+}
+
+
+/**
+  Returns the Null-terminated Unicode string that is used to fill in the
+  VersionName field of the EFI_FIRMWARE_IMAGE_DESCRIPTOR structure that is
+  returned by the GetImageInfo() service of the Firmware Management Protocol.
+  The returned string must be allocated using EFI_BOOT_SERVICES.AllocatePool().
+
+  @note It is recommended that all firmware devices support a method to report
+        the VersionName string from the currently stored firmware image.
+
+  @param[out] VersionString  The version string retrieved from the currently
+                             stored firmware image.
+
+  @retval EFI_SUCCESS            The version string of currently stored
+                                 firmware image was returned in Version.
+  @retval EFI_INVALID_PARAMETER  VersionString is NULL.
+  @retval EFI_UNSUPPORTED        The firmware device does not support a method
+                                 to report the version string of the currently
+                                 stored firmware image.
+  @retval EFI_DEVICE_ERROR       An error occurred attempting to retrieve the
+                                 version string of the currently stored
+                                 firmware image.
+  @retval EFI_OUT_OF_RESOURCES   There are not enough resources to allocate the
+                                 buffer for the version string of the currently
+                                 stored firmware image.
+
+**/
+EFI_STATUS
+EFIAPI
+FmpDeviceGetVersionString (
+  OUT CHAR16  **VersionString
+  )
+{
+  if (VersionString == NULL) {
+    return EFI_INVALID_PARAMETER;
+  }
+  *VersionString = NULL;
+  return EFI_UNSUPPORTED;
+}
+
+/**
+Gets the current running version.
+ONLY implement this if your running firmware has a method to return this at runtime.
+
+@param[out] Version           On return this value represents the current running version
+
+@retval EFI_SUCCESS           The version was correctly retrieved
+@retval EFI_UNSUPPORTED       Device firmware doesn't support reporting current version
+@retval EFI_DEVICE_ERROR      Error occurred when trying to get the version
+**/
+EFI_STATUS
+EFIAPI
+FmpDeviceGetVersion(
+IN OUT UINT32* Version
+)
+{
+  return EFI_UNSUPPORTED;
+}
+
+
+/**
+Retrieves a copy of the current firmware image of the device.
+
+This function allows a copy of the current firmware image to be created and saved.
+The saved copy could later been used, for example, in firmware image recovery or rollback.
+
+@param[out] Image              Points to the buffer where the current image is copied to.
+@param[out] ImageSize          On entry, points to the size of the buffer pointed to by Image, in bytes.
+On return, points to the length of the image, in bytes.
+
+@retval EFI_SUCCESS            The device was successfully updated with the new image.
+@retval EFI_BUFFER_TOO_SMALL   The buffer specified by ImageSize is too small to hold the
+image. The current buffer size needed to hold the image is returned
+in ImageSize.
+@retval EFI_INVALID_PARAMETER  The Image was NULL.
+@retval EFI_NOT_FOUND          The current image is not copied to the buffer.
+@retval EFI_UNSUPPORTED        The operation is not supported.
+
+**/
+EFI_STATUS
+EFIAPI
+FmpDeviceGetImage(
+IN  OUT  VOID                         *Image,
+IN  OUT  UINTN                        *ImageSize
+)
+/*++
+
+Routine Description:
+
+    This is a function used to read the current firmware from the device into memory.
+    This is an optional function and can return EFI_UNSUPPORTED.  This is useful for
+    test and diagnostics.
+
+Arguments:
+    Image               -- Buffer to place the image into.
+    ImageSize           -- Size of the Image buffer.
+
+Return Value:
+
+    EFI_STATUS code.
+    If not possible or not practical return EFI_UNSUPPORTED.
+
+--*/
+{
+  return EFI_UNSUPPORTED;
+}//GetImage()
+
+
+/**
+Updates the firmware image of the device.
+
+This function updates the hardware with the new firmware image.
+This function returns EFI_UNSUPPORTED if the firmware image is not updatable.
+If the firmware image is updatable, the function should perform the following minimal validations
+before proceeding to do the firmware image update.
+- Validate the image is a supported image for this device.  The function returns EFI_ABORTED if
+the image is unsupported.  The function can optionally provide more detailed information on
+why the image is not a supported image.
+- Validate the data from VendorCode if not null.  Image validation must be performed before
+VendorCode data validation.  VendorCode data is ignored or considered invalid if image
+validation failed.  The function returns EFI_ABORTED if the data is invalid.
+
+VendorCode enables vendor to implement vendor-specific firmware image update policy.  Null if
+the caller did not specify the policy or use the default policy.  As an example, vendor can implement
+a policy to allow an option to force a firmware image update when the abort reason is due to the new
+firmware image version is older than the current firmware image version or bad image checksum.
+Sensitive operations such as those wiping the entire firmware image and render the device to be
+non-functional should be encoded in the image itself rather than passed with the VendorCode.
+AbortReason enables vendor to have the option to provide a more detailed description of the abort
+reason to the caller.
+
+@param[in]  Image              Points to the new image.
+@param[in]  ImageSize          Size of the new image in bytes.
+@param[in]  VendorCode         This enables vendor to implement vendor-specific firmware image update policy.
+Null indicates the caller did not specify the policy or use the default policy.
+@param[in]  Progress           A function used by the driver to report the progress of the firmware update.
+@param[in]  CapsuleFwVersion   FMP Payload Header version of the image
+@param[out] AbortReason        A pointer to a pointer to a null-terminated string providing more
+details for the aborted operation. The buffer is allocated by this function
+with AllocatePool(), and it is the caller's responsibility to free it with a
+call to FreePool().
+
+@retval EFI_SUCCESS            The device was successfully updated with the new image.
+@retval EFI_ABORTED            The operation is aborted.
+@retval EFI_INVALID_PARAMETER  The Image was NULL.
+@retval EFI_UNSUPPORTED        The operation is not supported.
+
+**/
+EFI_STATUS
+EFIAPI
+FmpDeviceSetImage (
+IN  CONST VOID                                       *Image,
+IN  UINTN                                            ImageSize,
+IN  CONST VOID                                       *VendorCode,
+IN  EFI_FIRMWARE_MANAGEMENT_UPDATE_IMAGE_PROGRESS    Progress,
+IN  UINT32                                           CapsuleFwVersion,
+OUT CHAR16                                           **AbortReason
+)
+{
+    EFI_STATUS Status                         = EFI_SUCCESS;
+    UINT32 Updateable                         = 0;
+
+    Status = FmpDeviceCheckImage(Image, ImageSize, &Updateable);
+    if (EFI_ERROR(Status))
+    {
+        DEBUG((DEBUG_ERROR, "SetImage - Check Image failed with %r.\n", Status));
+        goto cleanup;
+    }
+
+    if (Updateable != IMAGE_UPDATABLE_VALID)
+    {
+        DEBUG((DEBUG_ERROR, "SetImage - Check Image returned that the Image was not valid for update.  Updatable value = 0x%X.\n", Updateable));
+        Status = EFI_ABORTED;
+        goto cleanup;
+    }
+
+    if (Progress == NULL)
+    {
+        DEBUG((DEBUG_ERROR, "SetImage - Invalid progress callback\n"));
+        Status = EFI_INVALID_PARAMETER;
+        goto cleanup;
+    }
+
+    Status = Progress(15);
+    if (EFI_ERROR(Status))
+    {
+        DEBUG((DEBUG_ERROR, "SetImage - Progress Callback failed with Status %r.\n", Status));
+    }
+
+    {
+      UINTN  p;
+
+      for (p = 20; p < 100; p++) {
+        gBS->Stall (100000);  //us  = 0.1 seconds
+        Progress (p);
+      }
+    }
+
+    //TODO: add support for VendorCode, and AbortReason
+cleanup:
+    return Status;
+}// SetImage()
+
+
+
+/**
+Checks if the firmware image is valid for the device.
+
+This function allows firmware update application to validate the firmware image without
+invoking the SetImage() first.
+
+@param[in]  Image              Points to the new image.
+@param[in]  ImageSize          Size of the new image in bytes.
+@param[out] ImageUpdatable     Indicates if the new image is valid for update. It also provides,
+if available, additional information if the image is invalid.
+
+@retval EFI_SUCCESS            The image was successfully checked.
+@retval EFI_INVALID_PARAMETER  The Image was NULL.
+
+**/
+EFI_STATUS
+EFIAPI
+FmpDeviceCheckImage(
+IN  CONST VOID                        *Image,
+IN  UINTN                             ImageSize,
+OUT UINT32                            *ImageUpdateable
+)
+{
+    EFI_STATUS status = EFI_SUCCESS;
+
+    if (ImageUpdateable == NULL)
+    {
+        DEBUG((DEBUG_ERROR, "CheckImage - ImageUpdateable Pointer Parameter is NULL.\n"));
+        status = EFI_INVALID_PARAMETER;
+        goto cleanup;
+    }
+
+    //
+    //Set to valid and then if any tests fail it will update this flag.
+    //
+    *ImageUpdateable = IMAGE_UPDATABLE_VALID;
+
+    if (Image == NULL)
+    {
+        DEBUG((DEBUG_ERROR, "CheckImage - Image Pointer Parameter is NULL.\n"));
+        *ImageUpdateable = IMAGE_UPDATABLE_INVALID; //not sure if this is needed
+        return EFI_INVALID_PARAMETER;
+    }
+
+cleanup:
+    return status;
+}// CheckImage()
+
+/**
+Device firmware should trigger lock mechanism so that device fw can not be updated or tampered with.
+This lock mechanism is generally only cleared by a full system reset (not just sleep state/low power mode)
+
+@retval EFI_SUCCESS           The device was successfully locked.
+@retval EFI_UNSUPPORTED       The hardware device/firmware doesn't support locking
+
+**/
+EFI_STATUS
+EFIAPI
+FmpDeviceLock(
+)
+{
+  return EFI_SUCCESS;
+}
diff --git a/Vlv2TbltDevicePkg/Feature/Capsule/Library/FmpDeviceLibSample/FmpDeviceLib.inf b/Vlv2TbltDevicePkg/Feature/Capsule/Library/FmpDeviceLibSample/FmpDeviceLib.inf
new file mode 100644
index 0000000000..6914c57ee7
--- /dev/null
+++ b/Vlv2TbltDevicePkg/Feature/Capsule/Library/FmpDeviceLibSample/FmpDeviceLib.inf
@@ -0,0 +1,51 @@
+##
+# Copyright (c) 2016, Microsoft Corporation
+
+# All rights reserved.
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+# 1. Redistributions of source code must retain the above copyright notice,
+# this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright notice,
+# this list of conditions and the following disclaimer in the documentation
+# and/or other materials provided with the distribution.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+# ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+# WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+# IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
+# INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+# LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
+# OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+##
+
+
+[Defines]
+  INF_VERSION                    = 0x00010005
+  BASE_NAME                      = Vlv2FmpDeviceLibSample
+  FILE_GUID                      = 582DF9AB-E626-42A8-A11C-3FEA098FF3FA
+  MODULE_TYPE                    = DXE_DRIVER
+  VERSION_STRING                 = 1.0
+  LIBRARY_CLASS                  = FmpDeviceLib|DXE_DRIVER
+
+#
+# The following information is for reference only and not required by the build tools.
+#
+#  VALID_ARCHITECTURES           = IA32 X64
+#
+
+[Sources]
+  FmpDeviceLib.c
+
+[Packages]
+  MdePkg/MdePkg.dec
+  FmpDevicePkg/FmpDevicePkg.dec
+
+[LibraryClasses]
+  DebugLib
+  BaseLib
+  UefiBootServicesTableLib   #for stall...remove later as stall is only needed to show progress
+
-- 
2.14.2.windows.3