From: Leif Lindholm <leif.lindholm@linaro.org>
To: Ming <ming.huang@linaro.org>
Cc: linaro-uefi@lists.linaro.org, edk2-devel@lists.01.org,
graeme.gregory@linaro.org, ard.biesheuvel@linaro.org,
guoheyi@huawei.com, wanghuiqiang@huawei.com,
huangming23@huawei.com, zhangjinsong2@huawei.com,
huangdaode@hisilicon.com, john.garry@huawei.com,
xinliang.liu@linaro.org, Luqi Jiang <jiangluqi@huawei.com>,
Heyi Guo <heyi.guo@linaro.org>
Subject: Re: [PATCH edk2-platforms v1 30/38] Hisilicon/D06: add apei driver
Date: Tue, 14 Aug 2018 16:39:38 +0100 [thread overview]
Message-ID: <20180814153938.7hvetyxd2lfn2tro@bivouac.eciton.net> (raw)
In-Reply-To: <5d23fc72-0b1f-b253-f5c0-85cfc2a3af06@linaro.org>
On Fri, Aug 10, 2018 at 10:46:34AM +0800, Ming wrote:
> >> --- /dev/null
> >> +++ b/Silicon/Hisilicon/Hi1620/Drivers/Apei/Apei.inf
> >> +[sources.common]
> >> + Apei.c
> >
> > Apei.h?
>
> As Apei.h is included by Apei.c, so I think Apei.h
> is no need to add here.
Will the build system still generate correct build dependencies if
Apei.h is modified?
> >> + Bert/bert.c
> >> + Bert/bert.h
And if so, why are these other .h files explicitly specified?
> >> + Einj/einj.c
> >> + Einj/einj.h
> >> + Erst/erst.c
> >> + Erst/erst.h
> >> + Hest/hest.c
> >> + Hest/hest.h
> >> + ErrorSource/Ghes.c
> >> + ErrorSource/Ghes.h
> >> + OemApeiHi1620.c
> >> diff --git a/Silicon/Hisilicon/Hi1620/Drivers/Apei/Einj/einj.h b/Silicon/Hisilicon/Hi1620/Drivers/Apei/Einj/einj.h
> >> new file mode 100644
> >> index 0000000000..a5342b600f
> >> --- /dev/null
> >> +++ b/Silicon/Hisilicon/Hi1620/Drivers/Apei/Einj/einj.h
> >> @@ -0,0 +1,154 @@
> >> +/** @file
> >> +*
> >> +* Copyright (c) 2017 Hisilicon Limited. All rights reserved.
> >> +*
> >> +* This program and the accompanying materials
> >> +* are licensed and made available under the terms and conditions of the BSD License
> >> +* which accompanies this distribution. The full text of the license may be found at
> >> +* http://opensource.org/licenses/bsd-license.php
> >> +*
> >> +* THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> >> +* WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
> >> +*
> >> +**/
> >> +
> >> +#ifndef _EINJ_H_
> >> +#define _EINJ_H_
> >> +
> >> +#include "Apei.h"
> >> +
> >> +#define EINJ_ACTION_NO 10
> >> +#define EINJ_BEGIN_OPERATION_VALUE 0xFFFF
> >> +#define EINJ_END_OPERATION_VALUE 0
> >> +#define EINJ_WRITE_MASK 0xFFFFFFFF
> >> +#define EINJ_READ_VALUE 0xFFFF
> >> +#define EINJ_READ_MASK 0xFFFFFFFF
> >> +
> >> +#define EINJ_TRIGGER_ERROR_ACTION_NO 1
> >> +
> >> +#define EFI_ACPI_EINJ_SET_ERROR_TYPE_WITH_ADDRESS 0x08
> >> +#define EFI_ACPI_EINJ_GET_EXCUTE_OPERATION_TIMINGS 0x09
> >> +
> >> +
> >> +extern EFI_ACPI_TABLE_PROTOCOL *mAcpiTableProtocol;
> >> +extern EFI_ACPI_SDT_PROTOCOL *mAcpiSdtProtocol;
> >> +extern APEI_TRUSTFIRMWARE_STRUCTURE *mApeiTrustfirmwareStruc;
> >> +
> >> +//
> >> +// Error Type Definition
> >> +//
> >> +#define EINJ_PROCESSOR_CORRECTABLE BIT0
> >> +#define EINJ_PROCESSOR_UNCORRECTABLE_NONFATAL BIT1
> >> +#define EINJ_PROCESSOR_UNCORRECTABLE_FATAL BIT2
> >> +#define EINJ_MEMORY_CORRECTABLE BIT3
> >> +#define EINJ_MEMORY_UNCORRECTABLE_NONFATAL BIT4
> >> +#define EINJ_MEMORY_UNCORRECTABLE_FATAL BIT5
> >> +#define EINJ_PCIE_CORRECTABLE BIT6
> >> +#define EINJ_PCIE_UNCORRECTABLE_NONFATAL BIT7
> >> +#define EINJ_PCIE_UNCORRECTABLE_FATAL BIT8
> >> +#define EINJ_PLATFORM_CORRECTABLE BIT9
> >> +#define EINJ_PLATFORM_UNCORRECTABLE_NONFATAL BIT10
> >> +#define EINJ_PLATFORM_UNCORRECTABLE_FATAL BIT11
> >> +#define EINJ_VENDOR_DEFINED_ERROR_TYPE BIT31
> >> +
> >> +//
> >> +#define EINJ_PROCESSOR_APIC_VALID BIT0
> >> +#define EINJ_MEMORY_ADDRESS_VALID BIT1
> >> +#define EINJ_PCIE_SBDF_VALID BIT2
> >> +
> >> +//CPER
> >> +#define EFI_GENERIC_ERROR_PROC_TYPE_ARM 0x02
> >> +
> >> +#define EFI_GENERIC_ERROR_PROC_ISA_ARM32 0x03
> >> +#define EFI_GENERIC_ERROR_PROC_ISA_ARM64 0x04
> >
> > Surely these should be added to MdePkg/Include/Guid/Cper.h instead?
> > Please submit a patch.
>
> OK, should this macro be add to MdePkg/Include/Guid/Cper.h ?
> EFI_GENERIC_ERROR_PROC_TYPE_ARM
Yes please - I could have been more clear on that.
/
Leif
next prev parent reply other threads:[~2018-08-14 15:39 UTC|newest]
Thread overview: 153+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-07-24 7:08 [PATCH edk2-platforms v1 00/38] Upload for D06 platform Ming Huang
2018-07-24 7:08 ` [PATCH edk2-platforms v1 01/38] Silicon/Hisilicon: Modify the MRC interface for other module Ming Huang
2018-08-02 14:42 ` Leif Lindholm
2018-08-05 3:35 ` Ming
2018-07-24 7:08 ` [PATCH edk2-platforms v1 02/38] Silicon/Hisilicon: Separate PlatformArch.h Ming Huang
2018-08-02 14:56 ` Leif Lindholm
2018-08-05 15:11 ` Ming
2018-07-24 7:08 ` [PATCH edk2-platforms v1 03/38] Hisilicon/D06: Add several basal file for D06 Ming Huang
2018-08-02 16:14 ` Leif Lindholm
2018-08-05 15:06 ` Ming
2018-08-06 3:01 ` Ming
2018-08-06 9:57 ` Leif Lindholm
2018-07-24 7:08 ` [PATCH edk2-platforms v1 04/38] Platform/Hisilicon/D06: Add M41T83RealTimeClockLib Ming Huang
2018-08-02 16:56 ` Leif Lindholm
2018-08-08 8:02 ` Ming
2018-08-08 9:12 ` Leif Lindholm
2018-07-24 7:08 ` [PATCH edk2-platforms v1 05/38] Platform/Hisilicon/D06: Add binary file for D06 Ming Huang
2018-08-02 17:05 ` Leif Lindholm
2018-08-07 15:04 ` Ming
2018-07-24 7:08 ` [PATCH edk2-platforms v1 06/38] Hisilicon/D06: Add OemMiscLibD06 Ming Huang
2018-08-02 17:22 ` Leif Lindholm
2018-08-08 3:49 ` Ming
2018-08-08 9:43 ` Leif Lindholm
2018-07-24 7:08 ` [PATCH edk2-platforms v1 07/38] Silicon/Hisilicon/D06: Wait for all disk ready Ming Huang
2018-08-02 17:36 ` Leif Lindholm
2018-08-08 9:02 ` Ming
2018-08-08 9:59 ` Leif Lindholm
2018-08-08 11:44 ` Ming
2018-08-08 12:53 ` Leif Lindholm
2018-08-10 1:44 ` Ming
2018-08-14 15:26 ` Leif Lindholm
2018-08-15 4:01 ` Ming
2018-08-15 13:12 ` Leif Lindholm
2018-07-24 7:08 ` [PATCH edk2-platforms v1 08/38] Silicon/Hisilicon/Acpi: Unify HisiAcipPlatformDxe Ming Huang
2018-08-02 17:39 ` Leif Lindholm
2018-07-24 7:08 ` [PATCH edk2-platforms v1 09/38] Hisilicon/D06: Add Debug Serial Port Init Driver Ming Huang
2018-08-02 18:10 ` Leif Lindholm
2018-08-08 7:37 ` Ming
2018-08-08 10:01 ` Leif Lindholm
2018-08-08 14:48 ` Ming
2018-07-24 7:08 ` [PATCH edk2-platforms v1 10/38] Hisilicon/D06: Add ACPI Tables for D06 Ming Huang
2018-08-02 18:13 ` Leif Lindholm
2018-08-02 18:24 ` Ard Biesheuvel
2018-07-24 7:08 ` [PATCH edk2-platforms v1 11/38] Hisilicon/D06: Add Hi1620OemConfigUiLib Ming Huang
2018-08-03 10:24 ` Leif Lindholm
2018-08-08 12:09 ` Ming
2018-08-11 6:35 ` Ming
2018-07-24 7:08 ` [PATCH edk2-platforms v1 12/38] Silicon/Hisilicon/D06: Stop watchdog Ming Huang
2018-08-03 10:28 ` Leif Lindholm
2018-08-08 9:49 ` Ming
2018-08-03 10:31 ` Ard Biesheuvel
2018-08-09 11:40 ` Ming
2018-08-09 11:53 ` Leif Lindholm
2018-07-24 7:08 ` [PATCH edk2-platforms v1 13/38] Silicon/Hisilicon/Acpi: Move some macro to PlatformArch.h Ming Huang
2018-08-03 10:37 ` Leif Lindholm
2018-08-08 12:22 ` Ming
2018-08-08 12:57 ` Leif Lindholm
2018-07-24 7:08 ` [PATCH edk2-platforms v1 14/38] Silicon/Hisilicon/D06: Fix I2C enable fail issue for D06 Ming Huang
2018-08-03 10:40 ` Leif Lindholm
2018-08-08 14:33 ` Ming
2018-07-24 7:08 ` [PATCH edk2-platforms v1 15/38] Silicon/Hisilicon/I2C: Optimize I2C library Ming Huang
2018-08-03 13:24 ` Leif Lindholm
2018-08-08 14:41 ` Ming
2018-07-24 7:09 ` [PATCH edk2-platforms v1 16/38] Silicon/Hisilicon/D06: Add I2C delay for HNS auto config Ming Huang
2018-08-03 13:28 ` Leif Lindholm
2018-08-09 3:59 ` Ming
2018-07-24 7:09 ` [PATCH edk2-platforms v1 17/38] Silicon/Hisilicon/D06: Optimize HNS config CDR post time Ming Huang
2018-08-03 13:30 ` Leif Lindholm
2018-08-08 14:54 ` Ming
2018-07-24 7:09 ` [PATCH edk2-platforms v1 18/38] Silicon/Hisilicon/Setup: Add Setup Item "EnableGOP" Ming Huang
2018-08-03 13:32 ` Leif Lindholm
2018-08-09 0:35 ` Ming
2018-07-24 7:09 ` [PATCH edk2-platforms v1 19/38] Hisilicon/Hi1620: Add ACPI PPTT table Ming Huang
2018-08-03 13:42 ` Leif Lindholm
2018-08-09 0:52 ` Ming
2018-07-24 7:09 ` [PATCH edk2-platforms v1 20/38] Platform/Hisilicon/D06: Enable ACPI PPTT Ming Huang
2018-08-03 13:43 ` Leif Lindholm
2018-07-24 7:09 ` [PATCH edk2-platforms v1 21/38] Silicon/Hisilicon/D0x: Move macro definition to PlatformArch.h Ming Huang
2018-08-03 13:44 ` Leif Lindholm
2018-07-24 7:09 ` [PATCH edk2-platforms v1 22/38] Platform/Hisilicon/D06: Add OemNicLib Ming Huang
2018-08-03 14:36 ` Leif Lindholm
2018-08-09 6:16 ` Ming
2018-08-09 10:19 ` Leif Lindholm
2018-08-09 14:41 ` Ming
2018-08-14 2:38 ` Ming
2018-08-14 15:48 ` Leif Lindholm
2018-08-15 11:08 ` Ming
2018-08-15 13:22 ` Leif Lindholm
2018-08-15 14:16 ` Ming
2018-07-24 7:09 ` [PATCH edk2-platforms v1 23/38] Hisilicon/D0X: Rename the global variable gDS3231RtcDevice Ming Huang
2018-08-03 15:20 ` Leif Lindholm
2018-08-09 6:22 ` Ming
2018-07-24 7:09 ` [PATCH edk2-platforms v1 24/38] Platform/Hisilicon/D06: Add OemNicConfig2P Driver Ming Huang
2018-08-03 15:23 ` Leif Lindholm
2018-08-09 6:24 ` Ming
2018-07-24 7:09 ` [PATCH edk2-platforms v1 25/38] Hisilicon/D0x: Update SMBIOS type9 info Ming Huang
2018-08-04 9:28 ` Leif Lindholm
2018-08-09 6:34 ` Ming
2018-07-24 7:09 ` [PATCH edk2-platforms v1 26/38] Silicon/Hisilicon/D0x: Move macro definition to PlatformArch.h Ming Huang
2018-08-04 9:34 ` Leif Lindholm
2018-08-09 6:37 ` Ming
2018-07-24 7:09 ` [PATCH edk2-platforms v1 27/38] Platform/Hisilicon/D06: Add EarlyConfigPeim peim Ming Huang
2018-08-04 9:59 ` Leif Lindholm
2018-08-09 7:07 ` Ming
2018-08-09 10:27 ` Leif Lindholm
2018-08-09 11:54 ` Ming
2018-08-14 2:31 ` Ming
2018-08-14 15:42 ` Leif Lindholm
2018-07-24 7:09 ` [PATCH edk2-platforms v1 28/38] Hisilicon/D0x: Unify FlashFvbDxe driver Ming Huang
2018-08-04 10:06 ` Leif Lindholm
2018-08-09 7:15 ` Ming
2018-07-24 7:09 ` [PATCH edk2-platforms v1 29/38] Platform/Hisilicon/D06: Add PciHostBridgeLib Ming Huang
2018-08-04 13:41 ` Leif Lindholm
2018-08-09 7:22 ` Ming
2018-07-24 7:09 ` [PATCH edk2-platforms v1 30/38] Hisilicon/D06: add apei driver Ming Huang
2018-08-04 14:47 ` Leif Lindholm
2018-08-10 2:46 ` Ming
2018-08-14 15:39 ` Leif Lindholm [this message]
2018-08-15 8:57 ` Ming
2018-07-24 7:09 ` [PATCH edk2-platforms v1 31/38] Silicon/Hisilicon/D06: Add some Lpc macro to LpcLib.h Ming Huang
2018-08-04 14:58 ` Leif Lindholm
2018-08-09 12:02 ` Ming
2018-07-24 7:09 ` [PATCH edk2-platforms v1 32/38] Platform/Hisilicon/D06: Add capsule upgrade support Ming Huang
2018-08-04 15:08 ` Leif Lindholm
2018-07-24 7:09 ` [PATCH edk2-platforms v1 33/38] Silicon/Hisilicon/D06: Modify for close slave core clock Ming Huang
2018-08-04 15:14 ` Leif Lindholm
2018-08-09 12:15 ` Ming
2018-08-09 12:27 ` Leif Lindholm
2018-08-10 2:05 ` Ming
2018-07-24 7:09 ` [PATCH edk2-platforms v1 34/38] Silicon/Hisilicon/D06: Add I2C Bus Exception deal function Ming Huang
2018-08-04 15:18 ` Leif Lindholm
2018-08-10 2:19 ` Ming
2018-07-24 7:09 ` [PATCH edk2-platforms v1 35/38] Silicon/Hisilicon/Setup: Support SPCR table switch Ming Huang
2018-08-04 15:20 ` Leif Lindholm
2018-08-09 14:17 ` Ming
2018-08-09 14:44 ` Leif Lindholm
2018-08-09 15:40 ` Ming
2018-08-09 15:48 ` Leif Lindholm
2018-07-24 7:09 ` [PATCH edk2-platforms v1 36/38] Silicon/Hisilicon/setup: Support SMMU switch Ming Huang
2018-08-06 9:59 ` Leif Lindholm
2018-08-09 14:19 ` Ming
2018-07-24 7:09 ` [PATCH edk2-platforms v1 37/38] Hisilicon/D06: Add PciPlatformLib Ming Huang
2018-08-06 10:01 ` Leif Lindholm
2018-08-09 14:27 ` Ming
2018-07-24 7:09 ` [PATCH edk2-platforms v1 38/38] Platform/Hisilicon/D0x: Update version string to 18.08 Ming Huang
2018-08-06 10:03 ` Leif Lindholm
2018-08-09 14:29 ` Ming
2018-08-01 21:56 ` [PATCH edk2-platforms v1 00/38] Upload for D06 platform Leif Lindholm
2018-08-02 1:46 ` Ming
2018-08-02 3:17 ` 答复: " Guoheyi
2018-08-02 10:12 ` Leif Lindholm
2018-08-02 15:36 ` Graeme Gregory
2018-08-04 14:26 ` Ming
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180814153938.7hvetyxd2lfn2tro@bivouac.eciton.net \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox