[PATCH v2 07/27] MdeModulePkg SdMmcPciHcDxe: Remove redundant functions

[shenglei <shenglei.zhang@intel.com>]

The functions that are never called have been removed.
They are SdCardGetCsd and SdCardGetScr.
https://bugzilla.tianocore.org/show_bug.cgi?id=1062

Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: shenglei <shenglei.zhang@intel.com>
---
 MdeModulePkg/Bus/Pci/SdMmcPciHcDxe/SdDevice.c | 107 ------------------
 1 file changed, 107 deletions(-)

diff --git a/MdeModulePkg/Bus/Pci/SdMmcPciHcDxe/SdDevice.c b/MdeModulePkg/Bus/Pci/SdMmcPciHcDxe/SdDevice.c
index 9e70de956f..8c93933bc6 100644
--- a/MdeModulePkg/Bus/Pci/SdMmcPciHcDxe/SdDevice.c
+++ b/MdeModulePkg/Bus/Pci/SdMmcPciHcDxe/SdDevice.c
@@ -318,116 +318,9 @@ SdCardSetRca (
   return Status;
 }
 
-/**
-  Send command SEND_CSD to the SD device to get the data of the CSD register.
-
-  Refer to SD Physical Layer Simplified Spec 4.1 Section 4.7 for details.
-
-  @param[in]  PassThru      A pointer to the EFI_SD_MMC_PASS_THRU_PROTOCOL instance.
-  @param[in]  Slot          The slot number of the SD card to send the command to.
-  @param[in]  Rca           The relative device address of selected device.
-  @param[out] Csd           The buffer to store the content of the CSD register.
-                            Note the caller should ignore the lowest byte of this
-                            buffer as the content of this byte is meaningless even
-                            if the operation succeeds.
-
-  @retval EFI_SUCCESS       The operation is done correctly.
-  @retval Others            The operation fails.
-
-**/
-EFI_STATUS
-SdCardGetCsd (
-  IN     EFI_SD_MMC_PASS_THRU_PROTOCOL  *PassThru,
-  IN     UINT8                          Slot,
-  IN     UINT16                         Rca,
-     OUT SD_CSD                         *Csd
-  )
-{
-  EFI_SD_MMC_COMMAND_BLOCK              SdMmcCmdBlk;
-  EFI_SD_MMC_STATUS_BLOCK               SdMmcStatusBlk;
-  EFI_SD_MMC_PASS_THRU_COMMAND_PACKET   Packet;
-  EFI_STATUS                            Status;
-
-  ZeroMem (&SdMmcCmdBlk, sizeof (SdMmcCmdBlk));
-  ZeroMem (&SdMmcStatusBlk, sizeof (SdMmcStatusBlk));
-  ZeroMem (&Packet, sizeof (Packet));
-
-  Packet.SdMmcCmdBlk    = &SdMmcCmdBlk;
-  Packet.SdMmcStatusBlk = &SdMmcStatusBlk;
-  Packet.Timeout        = SD_MMC_HC_GENERIC_TIMEOUT;
 
-  SdMmcCmdBlk.CommandIndex = SD_SEND_CSD;
-  SdMmcCmdBlk.CommandType  = SdMmcCommandTypeAc;
-  SdMmcCmdBlk.ResponseType = SdMmcResponseTypeR2;
-  SdMmcCmdBlk.CommandArgument = (UINT32)Rca << 16;
 
-  Status = SdMmcPassThruPassThru (PassThru, Slot, &Packet, NULL);
-  if (!EFI_ERROR (Status)) {
-    //
-    // For details, refer to SD Host Controller Simplified Spec 3.0 Table 2-12.
-    //
-    CopyMem (((UINT8*)Csd) + 1, &SdMmcStatusBlk.Resp0, sizeof (SD_CSD) - 1);
-  }
-
-  return Status;
-}
-
-/**
-  Send command SEND_CSD to the SD device to get the data of the CSD register.
-
-  Refer to SD Physical Layer Simplified Spec 4.1 Section 4.7 for details.
 
-  @param[in]  PassThru      A pointer to the EFI_SD_MMC_PASS_THRU_PROTOCOL instance.
-  @param[in]  Slot          The slot number of the SD card to send the command to.
-  @param[in]  Rca           The relative device address of selected device.
-  @param[out] Scr           The buffer to store the content of the SCR register.
-
-  @retval EFI_SUCCESS       The operation is done correctly.
-  @retval Others            The operation fails.
-
-**/
-EFI_STATUS
-SdCardGetScr (
-  IN     EFI_SD_MMC_PASS_THRU_PROTOCOL  *PassThru,
-  IN     UINT8                          Slot,
-  IN     UINT16                         Rca,
-     OUT SD_SCR                         *Scr
-  )
-{
-  EFI_SD_MMC_COMMAND_BLOCK              SdMmcCmdBlk;
-  EFI_SD_MMC_STATUS_BLOCK               SdMmcStatusBlk;
-  EFI_SD_MMC_PASS_THRU_COMMAND_PACKET   Packet;
-  EFI_STATUS                            Status;
-
-  ZeroMem (&SdMmcCmdBlk, sizeof (SdMmcCmdBlk));
-  ZeroMem (&SdMmcStatusBlk, sizeof (SdMmcStatusBlk));
-  ZeroMem (&Packet, sizeof (Packet));
-
-  Packet.SdMmcCmdBlk    = &SdMmcCmdBlk;
-  Packet.SdMmcStatusBlk = &SdMmcStatusBlk;
-  Packet.Timeout        = SD_MMC_HC_GENERIC_TIMEOUT;
-
-  SdMmcCmdBlk.CommandIndex = SD_APP_CMD;
-  SdMmcCmdBlk.CommandType  = SdMmcCommandTypeAc;
-  SdMmcCmdBlk.ResponseType = SdMmcResponseTypeR1;
-  SdMmcCmdBlk.CommandArgument = (UINT32)Rca << 16;
-
-  Status = SdMmcPassThruPassThru (PassThru, Slot, &Packet, NULL);
-  if (EFI_ERROR (Status)) {
-    return Status;
-  }
-
-  SdMmcCmdBlk.CommandIndex = SD_SEND_SCR;
-  SdMmcCmdBlk.CommandType  = SdMmcCommandTypeAdtc;
-  SdMmcCmdBlk.ResponseType = SdMmcResponseTypeR1;
-
-  Packet.InDataBuffer     = Scr;
-  Packet.InTransferLength = sizeof (SD_SCR);
-
-  Status = SdMmcPassThruPassThru (PassThru, Slot, &Packet, NULL);
-
-  return Status;
-}
 
 /**
   Send command SELECT_DESELECT_CARD to the SD device to select/deselect it.
-- 
2.18.0.windows.1