public inbox for devel@edk2.groups.io
 help / color / mirror / Atom feed
From: Laszlo Ersek <lersek@redhat.com>
To: edk2-devel-01 <edk2-devel@lists.01.org>
Cc: Liming Gao <liming.gao@intel.com>,
	Michael D Kinney <michael.d.kinney@intel.com>,
	Ruiyu Ni <ruiyu.ni@intel.com>
Subject: [PATCH 1/4] MdePkg/UefiLib: don't special-case EFI_FILE_MODE_CREATE in OpenMode
Date: Fri, 17 Aug 2018 16:35:31 +0200	[thread overview]
Message-ID: <20180817143534.28393-2-lersek@redhat.com> (raw)
In-Reply-To: <20180817143534.28393-1-lersek@redhat.com>

While reviewing the patch that would land as 768b611136d0
("MdePkg/UefiLib: introduce EfiOpenFileByDevicePath()", 2018-08-16), Ray
pointed out that distinguishing EFI_FILE_MODE_CREATE was wasteful. Per
spec, if the file to create exists, then EFI_FILE_MODE_CREATE is ignored
by EFI_FILE_PROTOCOL.Open(), and the existent file is opened.

Therefore we don't need an attempt to "open-but-not-create" first, and a
fallback to "open-and-create-too" second -- that behavior is internal to
EFI_FILE_PROTOCOL.Open(). Remove the special-casing of
EFI_FILE_MODE_CREATE.

Cc: Liming Gao <liming.gao@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Suggested-by: Ruiyu Ni <ruiyu.ni@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1074
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
---

Notes:
    Tested with MdeModulePkg/RamDiskDxe: created a virtual disk from an ISO
    file, using the HII form; browsed the disk contents from the UEFI shell.

 MdePkg/Include/Library/UefiLib.h | 19 ++--------
 MdePkg/Library/UefiLib/UefiLib.c | 40 +++-----------------
 2 files changed, 9 insertions(+), 50 deletions(-)

diff --git a/MdePkg/Include/Library/UefiLib.h b/MdePkg/Include/Library/UefiLib.h
index f950f1c9c648..f80067f11103 100644
--- a/MdePkg/Include/Library/UefiLib.h
+++ b/MdePkg/Include/Library/UefiLib.h
@@ -1533,12 +1533,7 @@ EfiLocateProtocolBuffer (
 
   On the remaining device path, the longest initial sequence of
   FILEPATH_DEVICE_PATH nodes is node-wise traversed with
-  EFI_FILE_PROTOCOL.Open(). For the pathname fragment specified by each
-  traversed FILEPATH_DEVICE_PATH node, EfiOpenFileByDevicePath() first masks
-  EFI_FILE_MODE_CREATE out of OpenMode, and passes 0 for Attributes. If
-  EFI_FILE_PROTOCOL.Open() fails, and OpenMode includes EFI_FILE_MODE_CREATE,
-  then the operation is retried with the caller's OpenMode and Attributes
-  unmodified.
+  EFI_FILE_PROTOCOL.Open().
 
   (As a consequence, if OpenMode includes EFI_FILE_MODE_CREATE, and Attributes
   includes EFI_FILE_DIRECTORY, and each FILEPATH_DEVICE_PATH specifies a single
@@ -1570,18 +1565,10 @@ EfiLocateProtocolBuffer (
                            the last node in FilePath.
 
   @param[in] OpenMode      The OpenMode parameter to pass to
-                           EFI_FILE_PROTOCOL.Open(). For each
-                           FILEPATH_DEVICE_PATH node in FilePath,
-                           EfiOpenFileByDevicePath() first opens the specified
-                           pathname fragment with EFI_FILE_MODE_CREATE masked
-                           out of OpenMode and with Attributes set to 0, and
-                           only retries the operation with EFI_FILE_MODE_CREATE
-                           unmasked and Attributes propagated if the first open
-                           attempt fails.
+                           EFI_FILE_PROTOCOL.Open().
 
   @param[in] Attributes    The Attributes parameter to pass to
-                           EFI_FILE_PROTOCOL.Open(), when EFI_FILE_MODE_CREATE
-                           is propagated unmasked in OpenMode.
+                           EFI_FILE_PROTOCOL.Open().
 
   @retval EFI_SUCCESS            The file or directory has been opened or
                                  created.
diff --git a/MdePkg/Library/UefiLib/UefiLib.c b/MdePkg/Library/UefiLib/UefiLib.c
index 7bcac5613768..39d0ce2b21b3 100644
--- a/MdePkg/Library/UefiLib/UefiLib.c
+++ b/MdePkg/Library/UefiLib/UefiLib.c
@@ -1730,12 +1730,7 @@ EfiLocateProtocolBuffer (
 
   On the remaining device path, the longest initial sequence of
   FILEPATH_DEVICE_PATH nodes is node-wise traversed with
-  EFI_FILE_PROTOCOL.Open(). For the pathname fragment specified by each
-  traversed FILEPATH_DEVICE_PATH node, EfiOpenFileByDevicePath() first masks
-  EFI_FILE_MODE_CREATE out of OpenMode, and passes 0 for Attributes. If
-  EFI_FILE_PROTOCOL.Open() fails, and OpenMode includes EFI_FILE_MODE_CREATE,
-  then the operation is retried with the caller's OpenMode and Attributes
-  unmodified.
+  EFI_FILE_PROTOCOL.Open().
 
   (As a consequence, if OpenMode includes EFI_FILE_MODE_CREATE, and Attributes
   includes EFI_FILE_DIRECTORY, and each FILEPATH_DEVICE_PATH specifies a single
@@ -1767,18 +1762,10 @@ EfiLocateProtocolBuffer (
                            the last node in FilePath.
 
   @param[in] OpenMode      The OpenMode parameter to pass to
-                           EFI_FILE_PROTOCOL.Open(). For each
-                           FILEPATH_DEVICE_PATH node in FilePath,
-                           EfiOpenFileByDevicePath() first opens the specified
-                           pathname fragment with EFI_FILE_MODE_CREATE masked
-                           out of OpenMode and with Attributes set to 0, and
-                           only retries the operation with EFI_FILE_MODE_CREATE
-                           unmasked and Attributes propagated if the first open
-                           attempt fails.
+                           EFI_FILE_PROTOCOL.Open().
 
   @param[in] Attributes    The Attributes parameter to pass to
-                           EFI_FILE_PROTOCOL.Open(), when EFI_FILE_MODE_CREATE
-                           is propagated unmasked in OpenMode.
+                           EFI_FILE_PROTOCOL.Open().
 
   @retval EFI_SUCCESS            The file or directory has been opened or
                                  created.
@@ -1889,31 +1876,16 @@ EfiOpenFileByDevicePath (
     }
 
     //
-    // Open the next pathname fragment with EFI_FILE_MODE_CREATE masked out and
-    // with Attributes set to 0.
+    // Open or create the file corresponding to the next pathname fragment.
     //
     Status = LastFile->Open (
                          LastFile,
                          &NextFile,
                          PathName,
-                         OpenMode & ~(UINT64)EFI_FILE_MODE_CREATE,
-                         0
+                         OpenMode,
+                         Attributes
                          );
 
-    //
-    // Retry with EFI_FILE_MODE_CREATE and the original Attributes if the first
-    // attempt failed, and the caller specified EFI_FILE_MODE_CREATE.
-    //
-    if (EFI_ERROR (Status) && (OpenMode & EFI_FILE_MODE_CREATE) != 0) {
-      Status = LastFile->Open (
-                           LastFile,
-                           &NextFile,
-                           PathName,
-                           OpenMode,
-                           Attributes
-                           );
-    }
-
     //
     // Release any AlignedPathName on both error and success paths; PathName is
     // no longer needed.
-- 
2.14.1.3.gb7cf6e02401b




  reply	other threads:[~2018-08-17 14:35 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-08-17 14:35 [PATCH 0/4] {Mde, IntelFramework, Network, UefiCpu}Pkg: roundup for BZs 1074, 1090, 1092 Laszlo Ersek
2018-08-17 14:35 ` Laszlo Ersek [this message]
2018-08-17 20:35   ` [PATCH 1/4] MdePkg/UefiLib: don't special-case EFI_FILE_MODE_CREATE in OpenMode Gao, Liming
2018-08-17 14:35 ` [PATCH 2/4] IntelFrameworkPkg/FrameworkUefiLib: don't special-case EFI_FILE_MODE_CREATE Laszlo Ersek
2018-08-17 20:35   ` Gao, Liming
2018-08-17 14:35 ` [PATCH 3/4] NetworkPkg/TlsAuthConfigDxe: fix TlsCaCertificate attributes retrieval Laszlo Ersek
2018-08-20  6:29   ` Li, Songpeng
2018-08-21 13:30     ` Laszlo Ersek
2018-08-22  0:36     ` Wu, Jiaxin
2018-08-22  0:31   ` Fu, Siyuan
2018-08-17 14:35 ` [PATCH 4/4] UefiCpuPkg/PiSmmCpuDxeSmm: clear exec file mode bits on "PiSmmCpuDxeSmm.c" Laszlo Ersek
2018-08-20  1:31   ` Zeng, Star
2018-08-22  8:41 ` [PATCH 0/4] {Mde, IntelFramework, Network, UefiCpu}Pkg: roundup for BZs 1074, 1090, 1092 Laszlo Ersek

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-list from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180817143534.28393-2-lersek@redhat.com \
    --to=devel@edk2.groups.io \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox