* [PATCH v1 1/1] ArmPkg: Add support for GICv4
@ 2018-08-21 10:14 Sami Mujawar
2018-08-22 19:19 ` Leif Lindholm
0 siblings, 1 reply; 2+ messages in thread
From: Sami Mujawar @ 2018-08-21 10:14 UTC (permalink / raw)
To: edk2-devel
Cc: ard.biesheuvel, leif.lindholm, Matteo.Carlini,
Stephanie.Hughes-Fitt, evan.lloyd, nd
Updated Redistributor base calculation to allow for the fact that
GICv4 has 2 additional 64KB frames (for VLPI and a reserved frame).
The code now tests the VLPIS bit in the GICR_TYPER register
and calculates the Redistributor granularity accordingly.
The code changes are:
GICR_TYPER register fields, etc, added to the header.
Loop updated to pay attention to GICR_TYPER.Last.
Derive frame "stride" size from GICR_TYPER.VLPIS.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
---
The changes can be seen at:
https://github.com/samimujawar/edk2/tree/329_gicv4_granularity_v1
Notes:
v1:
- Added support for initializing GICv4 [SAMI]
ArmPkg/Drivers/ArmGic/ArmGicLib.c | 37 ++++++++++++--------
ArmPkg/Include/Library/ArmGicLib.h | 19 ++++++++--
2 files changed, 39 insertions(+), 17 deletions(-)
diff --git a/ArmPkg/Drivers/ArmGic/ArmGicLib.c b/ArmPkg/Drivers/ArmGic/ArmGicLib.c
index 0087399fb1dba0e697f7a6ccd6f7432a59311ac6..033d98b75c1fc0414e7b70be1ca53d5c91cb6f3c 100644
--- a/ArmPkg/Drivers/ArmGic/ArmGicLib.c
+++ b/ArmPkg/Drivers/ArmGic/ArmGicLib.c
@@ -1,6 +1,6 @@
/** @file
*
-* Copyright (c) 2011-2017, ARM Limited. All rights reserved.
+* Copyright (c) 2011-2018, ARM Limited. All rights reserved.
*
* This program and the accompanying materials
* are licensed and made available under the terms and conditions of the BSD License
@@ -19,6 +19,16 @@
#include <Library/IoLib.h>
#include <Library/PcdLib.h>
+// In GICv3, there are 2 x 64KB frames:
+// Redistributor control frame + SGI Control & Generation frame
+#define GIC_V3_REDISTRIBUTOR_GRANULARITY (ARM_GICR_CTLR_FRAME_SIZE \
+ + ARM_GICR_SGI_PPI_FRAME_SIZE)
+
+// In GICv4, there are 2 additional 64KB frames:
+// VLPI frame + Reserved page frame
+#define GIC_V4_REDISTRIBUTOR_GRANULARITY (GIC_V3_REDISTRIBUTOR_GRANULARITY \
+ + ARM_GICR_SGI_VLPI_FRAME_SIZE \
+ + ARM_GICR_SGI_RESERVED_FRAME_SIZE)
#define ISENABLER_ADDRESS(base,offset) ((base) + \
ARM_GICR_CTLR_FRAME_SIZE + ARM_GICR_ISENABLER + (4 * offset))
@@ -54,12 +64,11 @@ GicGetCpuRedistributorBase (
IN ARM_GIC_ARCH_REVISION Revision
)
{
- UINTN Index;
UINTN MpId;
UINTN CpuAffinity;
UINTN Affinity;
- UINTN GicRedistributorGranularity;
UINTN GicCpuRedistributorBase;
+ UINT64 GicRTyper;
MpId = ArmReadMpidr ();
// Define CPU affinity as:
@@ -68,27 +77,27 @@ GicGetCpuRedistributorBase (
CpuAffinity = (MpId & (ARM_CORE_AFF0 | ARM_CORE_AFF1 | ARM_CORE_AFF2)) |
((MpId & ARM_CORE_AFF3) >> 8);
- if (Revision == ARM_GIC_ARCH_REVISION_3) {
- // 2 x 64KB frame:
- // Redistributor control frame + SGI Control & Generation frame
- GicRedistributorGranularity = ARM_GICR_CTLR_FRAME_SIZE
- + ARM_GICR_SGI_PPI_FRAME_SIZE;
- } else {
+ if (Revision < ARM_GIC_ARCH_REVISION_3) {
ASSERT_EFI_ERROR (EFI_UNSUPPORTED);
return 0;
}
GicCpuRedistributorBase = GicRedistributorBase;
- for (Index = 0; Index < PcdGet32 (PcdCoreCount); Index++) {
- Affinity = MmioRead64 (GicCpuRedistributorBase + ARM_GICR_TYPER) >> 32;
+ do {
+ GicRTyper = MmioRead64 (GicCpuRedistributorBase + ARM_GICR_TYPER);
+ Affinity = GicRTyper >> 32;
if (Affinity == CpuAffinity) {
return GicCpuRedistributorBase;
}
- // Move to the next GIC Redistributor frame
- GicCpuRedistributorBase += GicRedistributorGranularity;
- }
+ // Move to the next GIC Redistributor frame.
+ // The GIC specification does not forbid a mixture of v3 and v4 frames,
+ // so we test VLPIS for each frame.
+ GicCpuRedistributorBase += (((ARM_GICR_TYPER_VLPIS & GicRTyper) != 0)
+ ? GIC_V4_REDISTRIBUTOR_GRANULARITY
+ : GIC_V3_REDISTRIBUTOR_GRANULARITY);
+ } while ((GicRTyper & ARM_GICR_TYPER_LAST) == 0);
// The Redistributor has not been found for the current CPU
ASSERT_EFI_ERROR (EFI_NOT_FOUND);
diff --git a/ArmPkg/Include/Library/ArmGicLib.h b/ArmPkg/Include/Library/ArmGicLib.h
index 4b21ea9e4e76cb83c0c3421c1d9d88b456192687..4e3468648b255efa247dc4176ce4688986fcb226 100644
--- a/ArmPkg/Include/Library/ArmGicLib.h
+++ b/ArmPkg/Include/Library/ArmGicLib.h
@@ -1,6 +1,6 @@
/** @file
*
-* Copyright (c) 2011-2017, ARM Limited. All rights reserved.
+* Copyright (c) 2011-2018, ARM Limited. All rights reserved.
*
* This program and the accompanying materials
* are licensed and made available under the terms and conditions of the BSD License
@@ -60,12 +60,25 @@
// GIC Redistributor
-#define ARM_GICR_CTLR_FRAME_SIZE SIZE_64KB
-#define ARM_GICR_SGI_PPI_FRAME_SIZE SIZE_64KB
+#define ARM_GICR_CTLR_FRAME_SIZE SIZE_64KB
+#define ARM_GICR_SGI_PPI_FRAME_SIZE SIZE_64KB
+#define ARM_GICR_SGI_VLPI_FRAME_SIZE SIZE_64KB
+#define ARM_GICR_SGI_RESERVED_FRAME_SIZE SIZE_64KB
// GIC Redistributor Control frame
#define ARM_GICR_TYPER 0x0008 // Redistributor Type Register
+// GIC Redistributor TYPER bit assignments
+#define ARM_GICR_TYPER_PLPIS (1 << 0) // Physical LPIs
+#define ARM_GICR_TYPER_VLPIS (1 << 1) // Virtual LPIs
+#define ARM_GICR_TYPER_DIRECTLPI (1 << 3) // Direct LPIs
+#define ARM_GICR_TYPER_LAST (1 << 4) // Last Redistributor in series
+#define ARM_GICR_TYPER_DPGS (1 << 5) // Disable Processor Group
+ // Selection Support
+#define ARM_GICR_TYPER_PROCNO (0xFFFF << 8) // Processor Number
+#define ARM_GICR_TYPER_COMMONLPIAFF (0x3 << 24) // Common LPI Affinity
+#define ARM_GICR_TYPER_AFFINITY (0xFFFFFFFFULL << 32) // Redistributor Affinity
+
// GIC SGI & PPI Redistributor frame
#define ARM_GICR_ISENABLER 0x0100 // Interrupt Set-Enable Registers
#define ARM_GICR_ICENABLER 0x0180 // Interrupt Clear-Enable Registers
--
'Guid(CE165669-3EF3-493F-B85D-6190EE5B9759)'
^ permalink raw reply related [flat|nested] 2+ messages in thread
* Re: [PATCH v1 1/1] ArmPkg: Add support for GICv4
2018-08-21 10:14 [PATCH v1 1/1] ArmPkg: Add support for GICv4 Sami Mujawar
@ 2018-08-22 19:19 ` Leif Lindholm
0 siblings, 0 replies; 2+ messages in thread
From: Leif Lindholm @ 2018-08-22 19:19 UTC (permalink / raw)
To: Sami Mujawar
Cc: edk2-devel, ard.biesheuvel, Matteo.Carlini, Stephanie.Hughes-Fitt,
evan.lloyd, nd
Hi Sami,
On Tue, Aug 21, 2018 at 11:14:43AM +0100, Sami Mujawar wrote:
> Updated Redistributor base calculation to allow for the fact that
> GICv4 has 2 additional 64KB frames (for VLPI and a reserved frame).
> The code now tests the VLPIS bit in the GICR_TYPER register
Can you expand the name for this register (GIC Redistributor Type
Register)?
> and calculates the Redistributor granularity accordingly.
>
> The code changes are:
> GICR_TYPER register fields, etc, added to the header.
> Loop updated to pay attention to GICR_TYPER.Last.
> Derive frame "stride" size from GICR_TYPER.VLPIS.
>
> Contributed-under: TianoCore Contribution Agreement 1.1
> Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
> ---
> The changes can be seen at:
> https://github.com/samimujawar/edk2/tree/329_gicv4_granularity_v1
>
> Notes:
> v1:
> - Added support for initializing GICv4 [SAMI]
>
> ArmPkg/Drivers/ArmGic/ArmGicLib.c | 37 ++++++++++++--------
> ArmPkg/Include/Library/ArmGicLib.h | 19 ++++++++--
Can you add a sort order file in your working tree (git config
diff.orderFile) with the contents in Laszlo's unkempt guide?
> 2 files changed, 39 insertions(+), 17 deletions(-)
>
> diff --git a/ArmPkg/Drivers/ArmGic/ArmGicLib.c b/ArmPkg/Drivers/ArmGic/ArmGicLib.c
> index 0087399fb1dba0e697f7a6ccd6f7432a59311ac6..033d98b75c1fc0414e7b70be1ca53d5c91cb6f3c 100644
> --- a/ArmPkg/Drivers/ArmGic/ArmGicLib.c
> +++ b/ArmPkg/Drivers/ArmGic/ArmGicLib.c
> @@ -1,6 +1,6 @@
> /** @file
> *
> -* Copyright (c) 2011-2017, ARM Limited. All rights reserved.
> +* Copyright (c) 2011-2018, ARM Limited. All rights reserved.
> *
> * This program and the accompanying materials
> * are licensed and made available under the terms and conditions of the BSD License
> @@ -19,6 +19,16 @@
> #include <Library/IoLib.h>
> #include <Library/PcdLib.h>
>
> +// In GICv3, there are 2 x 64KB frames:
> +// Redistributor control frame + SGI Control & Generation frame
> +#define GIC_V3_REDISTRIBUTOR_GRANULARITY (ARM_GICR_CTLR_FRAME_SIZE \
> + + ARM_GICR_SGI_PPI_FRAME_SIZE)
> +
> +// In GICv4, there are 2 additional 64KB frames:
> +// VLPI frame + Reserved page frame
> +#define GIC_V4_REDISTRIBUTOR_GRANULARITY (GIC_V3_REDISTRIBUTOR_GRANULARITY \
> + + ARM_GICR_SGI_VLPI_FRAME_SIZE \
> + + ARM_GICR_SGI_RESERVED_FRAME_SIZE)
>
> #define ISENABLER_ADDRESS(base,offset) ((base) + \
> ARM_GICR_CTLR_FRAME_SIZE + ARM_GICR_ISENABLER + (4 * offset))
> @@ -54,12 +64,11 @@ GicGetCpuRedistributorBase (
> IN ARM_GIC_ARCH_REVISION Revision
> )
> {
> - UINTN Index;
> UINTN MpId;
> UINTN CpuAffinity;
> UINTN Affinity;
> - UINTN GicRedistributorGranularity;
> UINTN GicCpuRedistributorBase;
> + UINT64 GicRTyper;
I know this is the official name of the register, but this is a local
variable in a function specific to the redistributor, so could you
change it to be just TypeRegister?
>
> MpId = ArmReadMpidr ();
> // Define CPU affinity as:
> @@ -68,27 +77,27 @@ GicGetCpuRedistributorBase (
> CpuAffinity = (MpId & (ARM_CORE_AFF0 | ARM_CORE_AFF1 | ARM_CORE_AFF2)) |
> ((MpId & ARM_CORE_AFF3) >> 8);
>
> - if (Revision == ARM_GIC_ARCH_REVISION_3) {
> - // 2 x 64KB frame:
> - // Redistributor control frame + SGI Control & Generation frame
> - GicRedistributorGranularity = ARM_GICR_CTLR_FRAME_SIZE
> - + ARM_GICR_SGI_PPI_FRAME_SIZE;
> - } else {
> + if (Revision < ARM_GIC_ARCH_REVISION_3) {
> ASSERT_EFI_ERROR (EFI_UNSUPPORTED);
> return 0;
> }
>
> GicCpuRedistributorBase = GicRedistributorBase;
>
> - for (Index = 0; Index < PcdGet32 (PcdCoreCount); Index++) {
> - Affinity = MmioRead64 (GicCpuRedistributorBase + ARM_GICR_TYPER) >> 32;
> + do {
> + GicRTyper = MmioRead64 (GicCpuRedistributorBase + ARM_GICR_TYPER);
> + Affinity = GicRTyper >> 32;
Could you add a macro for that >> 32? ARM_GICR_TYPER_AFFINITY(...) ?
Hah, no, that's already used for the other way :)
_GET_AFFINITY?
> if (Affinity == CpuAffinity) {
> return GicCpuRedistributorBase;
> }
>
> - // Move to the next GIC Redistributor frame
> - GicCpuRedistributorBase += GicRedistributorGranularity;
> - }
> + // Move to the next GIC Redistributor frame.
> + // The GIC specification does not forbid a mixture of v3 and v4 frames,
> + // so we test VLPIS for each frame.
Could you expand VLPIS (Virtual LPIs Supported or somesuch)?
"v3 and v4" frames ... is that a correct architectural description?
/
Leif
> + GicCpuRedistributorBase += (((ARM_GICR_TYPER_VLPIS & GicRTyper) != 0)
> + ? GIC_V4_REDISTRIBUTOR_GRANULARITY
> + : GIC_V3_REDISTRIBUTOR_GRANULARITY);
> + } while ((GicRTyper & ARM_GICR_TYPER_LAST) == 0);
>
> // The Redistributor has not been found for the current CPU
> ASSERT_EFI_ERROR (EFI_NOT_FOUND);
> diff --git a/ArmPkg/Include/Library/ArmGicLib.h b/ArmPkg/Include/Library/ArmGicLib.h
> index 4b21ea9e4e76cb83c0c3421c1d9d88b456192687..4e3468648b255efa247dc4176ce4688986fcb226 100644
> --- a/ArmPkg/Include/Library/ArmGicLib.h
> +++ b/ArmPkg/Include/Library/ArmGicLib.h
> @@ -1,6 +1,6 @@
> /** @file
> *
> -* Copyright (c) 2011-2017, ARM Limited. All rights reserved.
> +* Copyright (c) 2011-2018, ARM Limited. All rights reserved.
> *
> * This program and the accompanying materials
> * are licensed and made available under the terms and conditions of the BSD License
> @@ -60,12 +60,25 @@
>
>
> // GIC Redistributor
> -#define ARM_GICR_CTLR_FRAME_SIZE SIZE_64KB
> -#define ARM_GICR_SGI_PPI_FRAME_SIZE SIZE_64KB
> +#define ARM_GICR_CTLR_FRAME_SIZE SIZE_64KB
> +#define ARM_GICR_SGI_PPI_FRAME_SIZE SIZE_64KB
> +#define ARM_GICR_SGI_VLPI_FRAME_SIZE SIZE_64KB
> +#define ARM_GICR_SGI_RESERVED_FRAME_SIZE SIZE_64KB
>
> // GIC Redistributor Control frame
> #define ARM_GICR_TYPER 0x0008 // Redistributor Type Register
>
> +// GIC Redistributor TYPER bit assignments
> +#define ARM_GICR_TYPER_PLPIS (1 << 0) // Physical LPIs
> +#define ARM_GICR_TYPER_VLPIS (1 << 1) // Virtual LPIs
> +#define ARM_GICR_TYPER_DIRECTLPI (1 << 3) // Direct LPIs
> +#define ARM_GICR_TYPER_LAST (1 << 4) // Last Redistributor in series
> +#define ARM_GICR_TYPER_DPGS (1 << 5) // Disable Processor Group
> + // Selection Support
> +#define ARM_GICR_TYPER_PROCNO (0xFFFF << 8) // Processor Number
> +#define ARM_GICR_TYPER_COMMONLPIAFF (0x3 << 24) // Common LPI Affinity
> +#define ARM_GICR_TYPER_AFFINITY (0xFFFFFFFFULL << 32) // Redistributor Affinity
> +
> // GIC SGI & PPI Redistributor frame
> #define ARM_GICR_ISENABLER 0x0100 // Interrupt Set-Enable Registers
> #define ARM_GICR_ICENABLER 0x0180 // Interrupt Clear-Enable Registers
> --
> 'Guid(CE165669-3EF3-493F-B85D-6190EE5B9759)'
>
>
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2018-08-22 19:19 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2018-08-21 10:14 [PATCH v1 1/1] ArmPkg: Add support for GICv4 Sami Mujawar
2018-08-22 19:19 ` Leif Lindholm
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox