[PATCH edk2-platforms 27/27] Platform/Solidrun: Add i.MX 6Quad Hummingboard Edge dsc and fdf files

[Chris Co <Christopher.Co@microsoft.com>]

This adds the dsd and fdf definitions for Solidrun's i.MX 6Quad
Hummingboard Edge platform.

Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Christopher Co <christopher.co@microsoft.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
---
 Platform/SolidRun/HummingBoardEdge_iMX6Q_2GB/HummingBoardEdge_iMX6Q_2GB.dsc | 141 ++++++++++++++++++++
 Platform/SolidRun/HummingBoardEdge_iMX6Q_2GB/HummingBoardEdge_iMX6Q_2GB.fdf | 117 ++++++++++++++++
 2 files changed, 258 insertions(+)

diff --git a/Platform/SolidRun/HummingBoardEdge_iMX6Q_2GB/HummingBoardEdge_iMX6Q_2GB.dsc b/Platform/SolidRun/HummingBoardEdge_iMX6Q_2GB/HummingBoardEdge_iMX6Q_2GB.dsc
new file mode 100644
index 000000000000..5e203bc92447
--- /dev/null
+++ b/Platform/SolidRun/HummingBoardEdge_iMX6Q_2GB/HummingBoardEdge_iMX6Q_2GB.dsc
@@ -0,0 +1,141 @@
+#
+# HummingBoard Edge board description
+# The board is iMX6 Quad with 2GB DRAM
+#
+#  Copyright (c) 2018 Microsoft Corporation. All rights reserved.
+#
+#  This program and the accompanying materials
+#  are licensed and made available under the terms and conditions of the BSD License
+#  which accompanies this distribution.  The full text of the license may be found at
+#  http://opensource.org/licenses/bsd-license.php
+#
+#  THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+#  WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+#
+
+################################################################################
+#
+# Board [Defines] Section
+#
+################################################################################
+
+[Defines]
+  DEFINE BOARD_NAME     = HummingBoardEdge_iMX6Q_2GB
+  DEFINE IMX_FAMILY     = IMX6DQ
+  DEFINE IMX_CHIP_TYPE  = QUAD
+  DEFINE DRAM_SIZE      = DRAM_2GB
+  BOARD_DIR             = Platform/SolidRun/$(BOARD_NAME)
+  FLASH_DEFINITION      = $(BOARD_DIR)/$(BOARD_NAME).fdf
+
+################################################################################
+#
+# Platform Description
+#
+################################################################################
+!include Silicon/NXP/iMX6Pkg/iMX6CommonDsc.inc
+
+[LibraryClasses.common]
+  ArmPlatformLib|$(BOARD_DIR)/Library/iMX6BoardLib/iMX6BoardLib.inf
+
+[Components.common]
+  # Display Support
+!if $(CONFIG_HEADLESS) == FALSE
+  MdeModulePkg/Universal/Console/ConPlatformDxe/ConPlatformDxe.inf
+  MdeModulePkg/Universal/Console/ConSplitterDxe/ConSplitterDxe.inf
+  MdeModulePkg/Universal/Console/GraphicsConsoleDxe/GraphicsConsoleDxe.inf
+  !if $(IMX_FAMILY) == IMX6SX
+    #
+    # Use board-specific GOP for SoloX
+    #
+    $(BOARD_DIR)/Drivers/GraphicsOutputDxe/GraphicsOutputDxe.inf
+  !else
+    Silicon/NXP/iMX6Pkg/Drivers/GopDxe/GopDxe.inf
+  !endif
+!endif
+
+  # ACPI Support
+  MdeModulePkg/Universal/Acpi/AcpiTableDxe/AcpiTableDxe.inf
+  MdeModulePkg/Universal/Acpi/AcpiPlatformDxe/AcpiPlatformDxe.inf
+  $(BOARD_DIR)/AcpiTables/AcpiTables.inf
+
+  # SMBIOS Support
+  Silicon/NXP/iMX6Pkg/Drivers/PlatformSmbiosDxe/PlatformSmbiosDxe.inf
+  MdeModulePkg/Universal/SmbiosDxe/SmbiosDxe.inf
+
+################################################################################
+#
+# Board PCD Sections
+#
+################################################################################
+
+########################
+#
+# iMX6Pkg PCDs
+#
+########################
+[PcdsFixedAtBuild.common]
+
+# SMBIOS Type0 Strings
+gEfiMdeModulePkgTokenSpaceGuid.PcdFirmwareVendor|L"SolidRun"
+gEfiMdeModulePkgTokenSpaceGuid.PcdFirmwareRevision|0x00000001 # FirmwareRevision 0.1
+
+# SMBIOS Type1 Strings
+giMX6TokenSpaceGuid.PcdSystemFamily|L"HummingBoard"
+giMX6TokenSpaceGuid.PcdSystemManufacturer|L"SolidRun"
+giMX6TokenSpaceGuid.PcdSystemProductName|L"HummingBoard-Edge i4Pro"
+giMX6TokenSpaceGuid.PcdSystemSkuNumber|L"MSMX6QDW00D02GE008E00CH"
+giMX6TokenSpaceGuid.PcdSystemVersionNumber|L"1.4"
+giMX6TokenSpaceGuid.PcdSystemUuid|{0xfa,0x00,0xe9,0x0f,0x97,0x4a,0x40,0x6f,0xaf,0x0f,0x4a,0xd4,0x66,0x50,0xbe,0x5a}
+
+# SMBIOS Type2 Strings
+giMX6TokenSpaceGuid.PcdBoardAssetTag|L"0"
+giMX6TokenSpaceGuid.PcdBoardLocationInChassis|L"Open Board"
+giMX6TokenSpaceGuid.PcdBoardManufacturer|L"SolidRun"
+giMX6TokenSpaceGuid.PcdBoardProductName|L"HummingBoard-Edge i4Pro"
+giMX6TokenSpaceGuid.PcdBoardVersionNumber|L"1.4"
+
+# SMBIOS Type3 Strings
+giMX6TokenSpaceGuid.PcdChassisAssetTag|L"0"
+giMX6TokenSpaceGuid.PcdChassisManufacturer|L"SolidRun"
+giMX6TokenSpaceGuid.PcdChassisVersionNumber|L"1.4"
+
+# SMBIOS Type4 Strings
+giMX6TokenSpaceGuid.PcdProcessorAssetTag|L"0"
+giMX6TokenSpaceGuid.PcdProcessorManufacturer|L"NXP"
+giMX6TokenSpaceGuid.PcdProcessorPartNumber|L"i.MX 6Quad"
+giMX6TokenSpaceGuid.PcdProcessorSocketDesignation|L"FCPBGA"
+giMX6TokenSpaceGuid.PcdProcessorVersionNumber|L"1.0"
+
+# SMBIOS Type16
+giMX6TokenSpaceGuid.PcdPhysicalMemoryMaximumCapacity|0x200000 # 2GB
+
+# SMBIOS Type17
+giMX6TokenSpaceGuid.PcdMemoryBankLocation|L"Bank 0"
+giMX6TokenSpaceGuid.PcdMemoryDeviceLocation|L"On SoM"
+
+#
+# USB EHCI Controller (USB_UH1)
+#
+giMX6TokenSpaceGuid.PcdEHCIBase|0x02184200
+
+#
+# Enable uSDHC2 and uSDHC3 Controllers.
+# On HummingBoardEdge, SDCard slot is attached to uSDHC2
+# with CD wired to SD2_CD_B, eMMC is attached to uSDHC3
+#
+giMXPlatformTokenSpaceGuid.PcdSdhc2Enable|TRUE
+giMXPlatformTokenSpaceGuid.PcdSdhc2CardDetectSignal|0xFFFF # Use uSDHC internal CD circuit
+giMXPlatformTokenSpaceGuid.PcdSdhc3Enable|TRUE
+
+#
+# UART initialization required
+#
+giMXPlatformTokenSpaceGuid.PcdSerialRegisterBase|0x02020000   # UART1
+giMXPlatformTokenSpaceGuid.PcdKdUartInstance|1                # UART1
+
+#
+# GPIO reset pin (PERST)
+#
+giMX6TokenSpaceGuid.PcdPcieResetGpio|TRUE
+giMX6TokenSpaceGuid.PcdPcieResetGpioBankNumber|2
+giMX6TokenSpaceGuid.PcdPcieResetGpioIoNumber|11
diff --git a/Platform/SolidRun/HummingBoardEdge_iMX6Q_2GB/HummingBoardEdge_iMX6Q_2GB.fdf b/Platform/SolidRun/HummingBoardEdge_iMX6Q_2GB/HummingBoardEdge_iMX6Q_2GB.fdf
new file mode 100644
index 000000000000..f40ee824e1e3
--- /dev/null
+++ b/Platform/SolidRun/HummingBoardEdge_iMX6Q_2GB/HummingBoardEdge_iMX6Q_2GB.fdf
@@ -0,0 +1,117 @@
+#
+#  iMX6 Quad Hummingboard FLASH layout
+#
+#  Copyright (c) 2018 Microsoft Corporation. All rights reserved.
+#
+#  This program and the accompanying materials
+#  are licensed and made available under the terms and conditions of the BSD License
+#  which accompanies this distribution.  The full text of the license may be found at
+#  http://opensource.org/licenses/bsd-license.php
+#
+#  THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+#  WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+#
+
+################################################################################
+#
+# FD Section
+# The [FD] Section is made up of the definition statements and a
+# description of what goes into  the Flash Device Image.  Each FD section
+# defines one flash "device" image.  A flash device image may be one of
+# the following: Removable media bootable image (like a boot floppy
+# image,) an Option ROM image (that would be "flashed" into an add-in
+# card,) a System "Flash"  image (that would be burned into a system's
+# flash) or an Update ("Capsule") image that will be used to update and
+# existing system flash.
+#
+################################################################################
+
+[FD.iMXBoard_EFI]
+!if $(IMX_FAMILY) == IMX6SX
+BaseAddress   = 0x82004000|gArmTokenSpaceGuid.PcdFdBaseAddress  #The base address of UEFI image
+!else
+BaseAddress   = 0x10820000|gArmTokenSpaceGuid.PcdFdBaseAddress  #The base address of UEFI image
+!endif
+Size          = 0x001D0000|gArmTokenSpaceGuid.PcdFdSize         #The size in bytes of UEFI image
+ErasePolarity = 1
+BlockSize     = 0x1
+NumBlocks     = 0x001D0000
+
+################################################################################
+#
+# Following are lists of FD Region layout which correspond to the locations of different
+# images within the flash device.
+#
+# Regions must be defined in ascending order and may not overlap.
+#
+# A Layout Region start with a eight digit hex offset (leading "0x" required) followed by
+# the pipe "|" character, followed by the size of the region, also in hex with the leading
+# "0x" characters. Like:
+# Offset|Size
+# PcdOffsetCName|PcdSizeCName
+# RegionType <FV, DATA, or FILE>
+#
+################################################################################
+0x00000000|0x001D0000    # 1792Kb for the Pei phase boot
+
+gArmTokenSpaceGuid.PcdFvBaseAddress|gArmTokenSpaceGuid.PcdFvSize
+FV = FVMAIN_COMPACT
+
+################################################################################
+#
+# FV Section
+#
+# [FV] section is used to define what components or modules are placed within a flash
+# device file.  This section also defines order the components and modules are positioned
+# within the image.  The [FV] section consists of define statements, set statements and
+# module statements.
+#
+################################################################################
+[FV.FvMain]
+BlockSize          = 0x1
+NumBlocks          = 0         # This FV gets compressed so make it just big enough
+FvAlignment        = 8         # FV alignment and FV attributes setting.
+ERASE_POLARITY     = 1
+MEMORY_MAPPED      = TRUE
+STICKY_WRITE       = TRUE
+LOCK_CAP           = TRUE
+LOCK_STATUS        = TRUE
+WRITE_DISABLED_CAP = TRUE
+WRITE_ENABLED_CAP  = TRUE
+WRITE_STATUS       = TRUE
+WRITE_LOCK_CAP     = TRUE
+WRITE_LOCK_STATUS  = TRUE
+READ_DISABLED_CAP  = TRUE
+READ_ENABLED_CAP   = TRUE
+READ_STATUS        = TRUE
+READ_LOCK_CAP      = TRUE
+READ_LOCK_STATUS   = TRUE
+
+  #
+  # ACPI
+  #
+  INF MdeModulePkg/Universal/Acpi/AcpiTableDxe/AcpiTableDxe.inf
+  INF MdeModulePkg/Universal/Acpi/AcpiPlatformDxe/AcpiPlatformDxe.inf
+  INF RuleOverride=ACPITABLE $(BOARD_DIR)/AcpiTables/AcpiTables.inf
+
+!if $(CONFIG_HEADLESS) == FALSE
+  INF MdeModulePkg/Universal/Console/ConPlatformDxe/ConPlatformDxe.inf
+  INF MdeModulePkg/Universal/Console/ConSplitterDxe/ConSplitterDxe.inf
+  INF MdeModulePkg/Universal/Console/GraphicsConsoleDxe/GraphicsConsoleDxe.inf
+  !if $(IMX_FAMILY) == IMX6SX
+    #
+    # Use board-specific GOP for SoloX
+    #
+    INF $(BOARD_DIR)/Drivers/GraphicsOutputDxe/GraphicsOutputDxe.inf
+  !else
+    INF Silicon/NXP/iMX6Pkg/Drivers/GopDxe/GopDxe.inf
+  !endif
+!endif
+
+  #
+  # SMBIOS Support
+  #
+  INF Silicon/NXP/iMX6Pkg/Drivers/PlatformSmbiosDxe/PlatformSmbiosDxe.inf
+  INF MdeModulePkg/Universal/SmbiosDxe/SmbiosDxe.inf
+
+!include Silicon/NXP/iMX6Pkg/iMX6CommonFdf.inc
-- 
2.16.2.gvfs.1.33.gf5370f1