* [edk2-test][Patch] uefi-sct/EMS:Add the checkpoint for SetData
@ 2018-10-12 8:20 Eric Jin
2018-10-12 8:57 ` Supreeth Venkatesh
2018-10-13 1:55 ` Wu, Jiaxin
0 siblings, 2 replies; 4+ messages in thread
From: Eric Jin @ 2018-10-12 8:20 UTC (permalink / raw)
To: edk2-devel
Spec clarifies the configuration clearance behavior
Correct the end line
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Eric Jin <eric.jin@intel.com>
Cc: Supreeth Venkatesh <supreeth.venkatesh@arm.com>
---
.../IP4Config2/Include/Ip4Config2AssertionGuid.tcl | 5 +-
.../TestCase/IP4Config2/SetData.Func1.Case2.tcl | 714 +++++++++++++
.../Bin/TestCase/IP6Config/GetData.Conf1.Case1.tcl | 142 +--
.../Bin/TestCase/IP6Config/GetData.Conf2.Case1.tcl | 140 +--
.../Bin/TestCase/IP6Config/GetData.Conf3.Case1.tcl | 788 +++++++-------
.../Bin/TestCase/IP6Config/GetData.Conf4.Case1.tcl | 144 +--
.../Bin/TestCase/IP6Config/GetData.Conf5.Case1.tcl | 982 +++++++++---------
.../Bin/TestCase/IP6Config/GetData.Func1.Case1.tcl | 542 +++++-----
.../TestCase/IP6Config/Include/Ip6Config.inc.tcl | 192 ++--
.../TestCase/IP6Config/Include/Ip6Config.proc.tcl | 30 +-
.../IP6Config/Include/Ip6ConfigAssertionGuid.tcl | 180 ++--
.../TestCase/IP6Config/Include/Ip6ConfigDefine.tcl | 102 +-
.../IP6Config/RegisterDataNotify.Conf1.Case1.tcl | 178 ++--
.../IP6Config/RegisterDataNotify.Conf2.Case1.tcl | 178 ++--
.../IP6Config/RegisterDataNotify.Conf3.Case1.tcl | 216 ++--
.../IP6Config/RegisterDataNotify.Func1.Case1.tcl | 1076 ++++++++++----------
.../IP6Config/RegisterDataNotify.Func1.Case2.tcl | 530 +++++-----
.../Bin/TestCase/IP6Config/SetData.Conf1.Case1.tcl | 142 +--
.../Bin/TestCase/IP6Config/SetData.Conf2.Case1.tcl | 596 +++++------
.../Bin/TestCase/IP6Config/SetData.Conf3.Case1.tcl | 142 +--
.../Bin/TestCase/IP6Config/SetData.Conf4.Case1.tcl | 474 ++++-----
.../Bin/TestCase/IP6Config/SetData.Conf5.Case1.tcl | 556 +++++-----
.../Bin/TestCase/IP6Config/SetData.Conf6.Case1.tcl | 142 +--
.../Bin/TestCase/IP6Config/SetData.Conf7.Case1.tcl | 1020 +++++++++----------
.../Bin/TestCase/IP6Config/SetData.Func1.Case1.tcl | 546 +++++-----
.../Bin/TestCase/IP6Config/SetData.Func2.Case1.tcl | 838 +++++++++++++++
.../IP6Config/UnregisterDataNotify.Conf1.Case1.tcl | 178 ++--
.../IP6Config/UnregisterDataNotify.Conf2.Case1.tcl | 164 +--
.../IP6Config/UnregisterDataNotify.Conf2.Case2.tcl | 196 ++--
.../IP6Config/UnregisterDataNotify.Func1.Case1.tcl | 194 ++--
.../IP6Config/UnregisterDataNotify.Func1.Case2.tcl | 472 ++++-----
31 files changed, 6683 insertions(+), 5116 deletions(-)
create mode 100644 uefi-sct/EMS/Bin/TestCase/IP4Config2/SetData.Func1.Case2.tcl
create mode 100644 uefi-sct/EMS/Bin/TestCase/IP6Config/SetData.Func2.Case1.tcl
diff --git a/uefi-sct/EMS/Bin/TestCase/IP4Config2/Include/Ip4Config2AssertionGuid.tcl b/uefi-sct/EMS/Bin/TestCase/IP4Config2/Include/Ip4Config2AssertionGuid.tcl
index 91a4fd1..e0604b2 100644
--- a/uefi-sct/EMS/Bin/TestCase/IP4Config2/Include/Ip4Config2AssertionGuid.tcl
+++ b/uefi-sct/EMS/Bin/TestCase/IP4Config2/Include/Ip4Config2AssertionGuid.tcl
@@ -1,6 +1,6 @@
#
# Copyright 2017 Unified EFI, Inc.<BR>
-# Copyright (c) 2017, Intel Corporation. All rights reserved.<BR>
+# Copyright (c) 2017 - 2018, Intel Corporation. All rights reserved.<BR>
#
# This program and the accompanying materials
# are licensed and made available under the terms and conditions of the BSD License
@@ -39,6 +39,9 @@ set Ip4Config2SetDataFunc1AssertionGuid008 00FBB58A-4BB3-499F-AE6B-744B6B9932E6
set Ip4Config2SetDataFunc1AssertionGuid009 DB8EF05C-085F-45D1-A0B1-DC2F307B6F1E
set Ip4Config2SetDataFunc1AssertionGuid010 29143621-896C-4FB9-9E70-7A4D2DA6BEE0
set Ip4Config2SetDataFunc1AssertionGuid011 72FEDF83-6755-4212-AF0F-780F457EFAA7
+set Ip4Config2SetDataFunc1AssertionGuid012 EB7769D1-A31F-4F37-86F3-2BBF54834785
+set Ip4Config2SetDataFunc1AssertionGuid013 78F3A664-A8E4-43B8-961F-71033E9145F2
+set Ip4Config2SetDataFunc1AssertionGuid014 7F717D50-3A7C-4E2A-9F15-0A802E9BAFE6
#
# Guid for GetData() interface
diff --git a/uefi-sct/EMS/Bin/TestCase/IP4Config2/SetData.Func1.Case2.tcl b/uefi-sct/EMS/Bin/TestCase/IP4Config2/SetData.Func1.Case2.tcl
new file mode 100644
index 0000000..0517032
--- /dev/null
+++ b/uefi-sct/EMS/Bin/TestCase/IP4Config2/SetData.Func1.Case2.tcl
@@ -0,0 +1,714 @@
+#
+# Copyright (c) 2018, Intel Corporation. All rights reserved.<BR>
+#
+# This program and the accompanying materials
+# are licensed and made available under the terms and conditions of the BSD License
+# which accompanies this distribution. The full text of the license may be found at
+# http://opensource.org/licenses/bsd-license.php
+#
+# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+#
+################################################################################
+CaseLevel FUNCTION
+CaseAttribute AUTO
+CaseVerboseLevel DEFAULT
+set reportfile report.csv
+
+#
+# test case Name, category, description, GUID...
+#
+CaseGuid B2AD20DF-2325-42B2-A199-A49ADF04A5DD
+CaseName SetData.Func1.Case2
+CaseCategory IP4Config2
+CaseDescription {SetData must succeed When DataSize is 0 and
+ Data is NULL,and existing configuration is cleared.}
+
+################################################################################
+Include IP4Config2/Include/Ip4Config2.inc.tcl
+
+
+#
+# Begin log ...
+#
+BeginLog
+
+#
+# BeginScope
+#
+BeginScope _IP4CONFIG2_SETDATA_FUNC1_CASE2
+
+#
+# Parameter Definition
+# R_ represents "Remote EFI Side Parameter"
+# L_ represents "Local ENTS Side Parameter"
+#
+#
+# Parameter Definition
+# R_ represents "Remote EFI Side Parameter"
+# L_ represents "Local ENTS Side Parameter"
+#
+UINTN R_Status
+UINTN R_Context
+UINTN R_DoneEvent
+UINTN R_Ip4Config2DataSize
+UINT32 R_Ip4Config2DataType
+UINT32 R_Ip4Config2Policy
+
+#
+# Check Point: Call Ip4Config2->SetData to set Static policy
+#
+SetVar R_Ip4Config2DataType $IP4C2DT(Policy)
+SetVar R_Ip4Config2DataSize [Sizeof UINT32]
+SetVar R_Ip4Config2Policy $IP4C2P(Static)
+
+SetVar R_Context 0
+BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context,\
+ &@R_DoneEvent, &@R_Status"
+GetAck
+set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
+RecordAssertion $assert $GenericAssertionGuid \
+ "BS.CreateEvent." \
+ "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
+
+Ip4Config2->RegisterDataNotify "@R_Ip4Config2DataType,@R_DoneEvent,&@R_Status"
+GetAck
+set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
+RecordAssertion $assert $GenericAssertionGuid \
+ "Ip4Config2.RegisterDataNotify - Register notification event for configuration." \
+ "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
+
+Ip4Config2->SetData "@R_Ip4Config2DataType,@R_Ip4Config2DataSize,&@R_Ip4Config2Policy,&@R_Status"
+GetAck
+GetVar R_Status
+if { $R_Status == $EFI_SUCCESS } {
+ set assert pass
+ RecordAssertion $assert $Ip4Config2SetDataFunc1AssertionGuid001 \
+ "Ip4Config2.SetData - Call SetData to set Static policy." \
+ "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
+} elseif { $R_Status == $EFI_NOT_READY } {
+ set i 0
+ set L_TimeOut 30
+ while { 1 > 0 } {
+ GetVar R_Context
+ if { $R_Context == 1 } {
+ break
+ } elseif { $i == $L_TimeOut } {
+ set assert fail
+ RecordAssertion $assert $Ip4Config2SetDataFunc1AssertionGuid001 \
+ "SetData failed.(event hasn't been signaled before TIMEOUT)." \
+ "TIMEOUT value is $L_TimeOut (sec), "
+ SetVar R_Ip4Config2DataType $IP4C2DT(Policy)
+ Ip4Config2->UnregisterDataNotify "@R_Ip4Config2DataType,@R_DoneEvent,&@R_Status"
+ GetAck
+ BS->CloseEvent {@R_DoneEvent,&@R_Status}
+ GetAck
+ EndScope _IP4CONFIG2_SETDATA_FUNC1_CASE2
+ EndLog
+ return
+ }
+ incr i
+ Stall 1
+ }
+} else {
+ set assert fail
+ RecordAssertion $assert $Ip4Config2SetDataFunc1AssertionGuid001 \
+ "Ip4Config2.SetData - Call SetData to set Static policy." \
+ "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
+
+ SetVar R_Ip4Config2DataType $IP4C2DT(Policy)
+ Ip4Config2->UnregisterDataNotify "@R_Ip4Config2DataType,@R_DoneEvent,&@R_Status"
+ GetAck
+ BS->CloseEvent {@R_DoneEvent,&@R_Status}
+ GetAck
+ EndScope _IP4CONFIG2_SETDATA_FUNC1_CASE2
+ EndLog
+ return
+}
+
+
+Ip4Config2->GetData "@R_Ip4Config2DataType,&@R_Ip4Config2DataSize,&@R_Ip4Config2Policy,&@R_Status"
+GetAck
+set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
+RecordAssertion $assert $GenericAssertionGuid \
+ "Ip4Config2.GetData - Call GetData to get policy value." \
+ "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
+GetVar R_Ip4Config2Policy
+if { $R_Ip4Config2Policy == $IP4C2P(Static) } {
+ set assert pass
+} else {
+ set assert fail
+
+ RecordAssertion $assert $Ip4Config2SetDataFunc1AssertionGuid002 \
+ "Set Static policy succeeds(event is signaled correctly and data correct)."
+ SetVar R_Ip4Config2Policy $IP4C2DT(Policy)
+ Ip4Config2->UnregisterDataNotify "@R_Ip4Config2DataType,@R_DoneEvent,&@R_Status"
+ GetAck
+ BS->CloseEvent {@R_DoneEvent,&@R_Status}
+ GetAck
+ EndScope _IP4CONFIG2_SETDATA_FUNC1_CASE2
+ EndLog
+ return
+}
+
+Ip4Config2->UnregisterDataNotify "@R_Ip4Config2DataType,@R_DoneEvent,&@R_Status"
+GetAck
+RecordAssertion $assert $Ip4Config2SetDataFunc1AssertionGuid002 \
+ "Set Static policy succeeds(event is signaled correctly and data correct)."
+
+#
+# Check Point : Set Manual Address
+#
+EFI_IP4_CONFIG2_MANUAL_ADDRESS R_Temp_Ip4Config2ManualAddress
+EFI_IP4_CONFIG2_MANUAL_ADDRESS R_Ip4Config2ManualAddress
+SetVar R_Ip4Config2DataType $IP4C2DT(ManualAddress)
+SetVar R_Ip4Config2DataSize [Sizeof EFI_IP4_CONFIG2_MANUAL_ADDRESS]
+SetIpv4Address R_Temp_Ip4Config2ManualAddress.Address "10.239.9.15"
+SetIpv4Address R_Temp_Ip4Config2ManualAddress.SubnetMask "255.255.255.0"
+SetVar R_Ip4Config2ManualAddress @R_Temp_Ip4Config2ManualAddress
+
+SetVar R_Context 0
+Ip4Config2->RegisterDataNotify "@R_Ip4Config2DataType,@R_DoneEvent,&@R_Status"
+GetAck
+set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
+RecordAssertion $assert $GenericAssertionGuid \
+ "Ip4Config2.RegisterDataNotify - Register notification event for configuration." \
+ "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
+
+
+Ip4Config2->SetData "@R_Ip4Config2DataType,@R_Ip4Config2DataSize,&@R_Ip4Config2ManualAddress,&@R_Status"
+GetAck
+GetVar R_Status
+
+if { $R_Status == $EFI_SUCCESS } {
+ set assert pass
+ RecordAssertion $assert $Ip4Config2SetDataFunc1AssertionGuid003 \
+ "Ip4Config2.SetData - Call SetData to set Manual Address." \
+ "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
+} elseif { $R_Status == $EFI_NOT_READY } {
+ set i 0
+ set L_TimeOut 30
+ while { 1 > 0 } {
+ GetVar R_Context
+ if { $R_Context == 1 } {
+ break
+ } elseif { $i == $L_TimeOut } {
+ set assert fail
+ RecordAssertion $assert $Ip4Config2SetDataFunc1AssertionGuid003 \
+ "SetData failed.(event hasn't been signaled before TIMEOUT)." \
+ "TIMEOUT value is $L_TimeOut (sec), "
+ SetVar R_Ip4Config2DataType $IP4C2DT(ManualAddress)
+ Ip4Config2->UnregisterDataNotify "@R_Ip4Config2DataType,@R_DoneEvent,&@R_Status"
+ GetAck
+ BS->CloseEvent {@R_DoneEvent,&@R_Status}
+ GetAck
+ EndScope _IP4CONFIG2_SETDATA_FUNC1_CASE2
+ EndLog
+ return
+ }
+ incr i
+ Stall 1
+ }
+} else {
+ set assert fail
+ RecordAssertion $assert $Ip4Config2SetDataFunc1AssertionGuid003 \
+ "IP4Config2.SetData - Call SetData to set Manual Address." \
+ "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
+
+ SetVar R_Ip4Config2DataType $IP4C2DT(ManualAddress)
+ Ip4Config2->UnregisterDataNotify "@R_Ip4Config2DataType,@R_DoneEvent,&@R_Status"
+ GetAck
+ BS->CloseEvent {@R_DoneEvent,&@R_Status}
+ GetAck
+ EndScope _IP4CONFIG2_SETDATA_FUNC1_CASE2
+ EndLog
+ return
+}
+
+
+Ip4Config2->GetData "@R_Ip4Config2DataType,&@R_Ip4Config2DataSize,&@R_Ip4Config2ManualAddress,&@R_Status"
+GetAck
+set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
+RecordAssertion $assert $GenericAssertionGuid \
+ "Ip4Config2.GetData - Call GetData to get Manual Address." \
+ "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
+
+
+EFI_IPv4_ADDRESS R_Addr1
+EFI_IPv4_ADDRESS R_Addr2
+set R_Addr1 [GetIpv4Address R_Ip4Config2ManualAddress.Address]
+puts "R_Addr1 - $R_Addr1"
+set R_Addr2 [GetIpv4Address R_Ip4Config2ManualAddress.SubnetMask]
+puts "R_Addr1 - $R_Addr2"
+
+if {[string compare -nocase $R_Addr1 10.239.9.15] == 0} {
+ if {[string compare -nocase $R_Addr2 255.255.255.0] == 0} {
+ set assert pass
+ } else {
+ set assert fail
+ RecordAssertion $assert $Ip4Config2SetDataFunc1AssertionGuid004 \
+ "Set ManualAddress succeeds(event is signaled correctly and data correct)."
+ Ip4Config2->UnregisterDataNotify "@R_Ip4Config2DataType,@R_DoneEvent,&@R_Status"
+ GetAck
+ BS->CloseEvent {@R_DoneEvent,&@R_Status}
+ GetAck
+ EndScope _IP4CONFIG2_SETDATA_FUNC1_CASE2
+ EndLog
+ return
+ }
+} else {
+ set assert fail
+
+ RecordAssertion $assert $Ip4Config2SetDataFunc1AssertionGuid004 \
+ "Set ManualAddress succeeds(event is signaled correctly and data correct)."
+ Ip4Config2->UnregisterDataNotify "@R_Ip4Config2DataType,@R_DoneEvent,&@R_Status"
+ GetAck
+ BS->CloseEvent {@R_DoneEvent,&@R_Status}
+ GetAck
+ EndScope _IP4CONFIG2_SETDATA_FUNC1_CASE2
+ EndLog
+ return
+}
+
+Ip4Config2->UnregisterDataNotify "@R_Ip4Config2DataType,@R_DoneEvent,&@R_Status"
+GetAck
+RecordAssertion $assert $Ip4Config2SetDataFunc1AssertionGuid004 \
+ "Set ManualAddress succeeds(event is signaled correctly and data correct)."
+
+#
+# Check Points : Set Gateway
+#
+EFI_IPv4_ADDRESS R_Ip4Config2Gateway
+SetVar R_Ip4Config2DataType $IP4C2DT(Gateway)
+SetVar R_Ip4Config2DataSize [Sizeof EFI_IPv4_ADDRESS]
+SetIpv4Address R_Ip4Config2Gateway "10.239.9.241"
+
+SetVar R_Context 0
+Ip4Config2->RegisterDataNotify "@R_Ip4Config2DataType,@R_DoneEvent,&@R_Status"
+GetAck
+set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
+RecordAssertion $assert $GenericAssertionGuid \
+ "Ip4Config2.RegisterDataNotify - Register notification event for configuration." \
+ "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
+
+Ip4Config2->SetData "@R_Ip4Config2DataType,@R_Ip4Config2DataSize,&@R_Ip4Config2Gateway,&@R_Status"
+GetAck
+GetVar R_Status
+
+if { $R_Status == $EFI_SUCCESS } {
+ set assert pass
+ RecordAssertion $assert $Ip4Config2SetDataFunc1AssertionGuid005 \
+ "Ip4Config2.SetData - Call SetData to set Gateway Address." \
+ "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
+} elseif { $R_Status == $EFI_NOT_READY } {
+ set i 0
+ set L_TimeOut 30
+ while { 1 > 0 } {
+ GetVar R_Context
+ if { $R_Context == 1 } {
+ break
+ } elseif { $i == $L_TimeOut } {
+ set assert fail
+ RecordAssertion $assert $Ip4Config2SetDataFunc1AssertionGuid005 \
+ "SetData failed.(event hasn't been signaled before TIMEOUT)." \
+ "TIMEOUT value is $L_TimeOut (sec), "
+ Ip4Config2->UnregisterDataNotify "@R_Ip4Config2DataType,@R_DoneEvent,&@R_Status"
+ GetAck
+ BS->CloseEvent {@R_DoneEvent,&@R_Status}
+ GetAck
+ EndScope _IP4CONFIG2_SETDATA_FUNC1_CASE2
+ EndLog
+ return
+ }
+ incr i
+ Stall 1
+ }
+} else {
+ set assert fail
+ RecordAssertion $assert $Ip4Config2SetDataFunc1AssertionGuid005 \
+ "Ip4Config2.SetData - Call SetData to set Gateway Address." \
+ "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
+
+ Ip4Config2->UnregisterDataNotify "@R_Ip4Config2DataType,@R_DoneEvent,&@R_Status"
+ GetAck
+ BS->CloseEvent {@R_DoneEvent,&@R_Status}
+ GetAck
+ EndScope _IP4CONFIG2_SETDATA_FUNC1_CASE2
+ EndLog
+ return
+}
+
+
+Ip4Config2->GetData "@R_Ip4Config2DataType,&@R_Ip4Config2DataSize,&@R_Ip4Config2Gateway,&@R_Status"
+GetAck
+set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
+RecordAssertion $assert $GenericAssertionGuid \
+ "Ip4Config2.GetData - Call GetData to get Gateway Address." \
+ "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
+
+EFI_IPv4_ADDRESS R_Addr3
+set R_Addr3 [GetIpv4Address R_Ip4Config2Gateway]
+puts "R_Addr3 - $R_Addr3"
+
+if {[string compare -nocase $R_Addr3 10.239.9.241] == 0} {
+ set assert pass
+} else {
+ set assert fail
+
+ RecordAssertion $assert $Ip4Config2SetDataFunc1AssertionGuid006 \
+ "Set Gateway succeeds(event is signaled correctly and data correct)."
+ Ip4Config2->UnregisterDataNotify "@R_Ip4Config2DataType,@R_DoneEvent,&@R_Status"
+ GetAck
+ BS->CloseEvent {@R_DoneEvent,&@R_Status}
+ GetAck
+ EndScope _IP4CONFIG2_SETDATA_FUNC1_CASE2
+ EndLog
+ return
+}
+
+Ip4Config2->UnregisterDataNotify "@R_Ip4Config2DataType,@R_DoneEvent,&@R_Status"
+GetAck
+RecordAssertion $assert $Ip4Config2SetDataFunc1AssertionGuid006 \
+ "Set Gateway succeeds(event is signaled correctly and data correct)."
+
+#
+# Check Point : Set Dns Server
+#
+EFI_IPv4_ADDRESS R_Ip4Config2DnsServer
+SetVar R_Ip4Config2DataType $IP4C2DT(DnsServer)
+SetVar R_Ip4Config2DataSize [Sizeof EFI_IPv4_ADDRESS]
+SetIpv4Address R_Ip4Config2DnsServer "10.248.2.5"
+
+SetVar R_Context 0
+Ip4Config2->RegisterDataNotify "@R_Ip4Config2DataType,@R_DoneEvent,&@R_Status"
+GetAck
+set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
+RecordAssertion $assert $GenericAssertionGuid \
+ "Ip4Config2.RegisterDataNotify - Register notification event for configuration." \
+ "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
+
+Ip4Config2->SetData "@R_Ip4Config2DataType,@R_Ip4Config2DataSize,&@R_Ip4Config2DnsServer,&@R_Status"
+GetAck
+GetVar R_Status
+
+if { $R_Status == $EFI_SUCCESS } {
+ set assert pass
+ RecordAssertion $assert $Ip4Config2SetDataFunc1AssertionGuid007 \
+ "Ip4Config2.SetData - Call SetData to set Dns Address." \
+ "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
+} elseif { $R_Status == $EFI_NOT_READY } {
+ set i 0
+ set L_TimeOut 30
+ while { 1 > 0 } {
+ GetVar R_Context
+ if { $R_Context == 1 } {
+ break
+ } elseif { $i == $L_TimeOut } {
+ set assert fail
+ RecordAssertion $assert $Ip4Config2SetDataFunc1AssertionGuid007 \
+ "SetData failed.(event hasn't been signaled before TIMEOUT)." \
+ "TIMEOUT value is $L_TimeOut (sec), "
+ Ip4Config2->UnregisterDataNotify "@R_Ip4Config2DataType,@R_DoneEvent,&@R_Status"
+ GetAck
+ BS->CloseEvent {@R_DoneEvent,&@R_Status}
+ GetAck
+ EndScope _IP4CONFIG2_SETDATA_FUNC1_CASE2
+ EndLog
+ return
+ }
+ incr i
+ Stall 1
+ }
+} else {
+ set assert fail
+ RecordAssertion $assert $Ip4Config2SetDataFunc1AssertionGuid007 \
+ "Ip4Config2.SetData - Call SetData to set Dns Address." \
+ "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
+
+ Ip4Config2->UnregisterDataNotify "@R_Ip4Config2DataType,@R_DoneEvent,&@R_Status"
+ GetAck
+ BS->CloseEvent {@R_DoneEvent,&@R_Status}
+ GetAck
+ EndScope _IP4CONFIG2_SETDATA_FUNC1_CASE2
+ EndLog
+ return
+}
+
+
+Ip4Config2->GetData "@R_Ip4Config2DataType,&@R_Ip4Config2DataSize,&@R_Ip4Config2DnsServer,&@R_Status"
+GetAck
+set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
+RecordAssertion $assert $GenericAssertionGuid \
+ "Ip4Config2.GetData - Call GetData to get Dns Address." \
+ "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
+
+EFI_IPv4_ADDRESS R_Addr4
+set R_Addr4 [GetIpv4Address R_Ip4Config2DnsServer]
+puts "R_Addr4 - $R_Addr4"
+
+if {[string compare -nocase $R_Addr4 10.248.2.5] == 0} {
+ set assert pass
+} else {
+ set assert fail
+
+ RecordAssertion $assert $Ip4Config2SetDataFunc1AssertionGuid008 \
+ "Set Dns succeeds(event is signaled correctly and data correct)."
+ Ip4Config2->UnregisterDataNotify "@R_Ip4Config2DataType,@R_DoneEvent,&@R_Status"
+ GetAck
+ BS->CloseEvent {@R_DoneEvent,&@R_Status}
+ GetAck
+ EndScope _IP4CONFIG2_SETDATA_FUNC1_CASE2
+ EndLog
+ return
+}
+
+Ip4Config2->UnregisterDataNotify "@R_Ip4Config2DataType,@R_DoneEvent,&@R_Status"
+GetAck
+RecordAssertion $assert $Ip4Config2SetDataFunc1AssertionGuid008 \
+ "Set Dns succeeds(event is signaled correctly and data correct)."
+
+
+
+#
+# Clean up - Call SetData when DataSize is 0 and Data is NULL
+#
+
+
+
+#
+# Set Manual Address
+#
+
+SetVar R_Ip4Config2DataType $IP4C2DT(ManualAddress)
+SetVar R_Ip4Config2DataSize 0
+
+
+
+SetVar R_Context 0
+Ip4Config2->RegisterDataNotify "@R_Ip4Config2DataType,@R_DoneEvent,&@R_Status"
+GetAck
+set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
+RecordAssertion $assert $GenericAssertionGuid \
+ "Ip4Config2.RegisterDataNotify - Register notification event for configuration." \
+ "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
+
+
+Ip4Config2->SetData "@R_Ip4Config2DataType,@R_Ip4Config2DataSize,NULL,&@R_Status"
+GetAck
+GetVar R_Status
+
+if { $R_Status == $EFI_SUCCESS } {
+ set assert pass
+ RecordAssertion $assert $Ip4Config2SetDataFunc1AssertionGuid012 \
+ "Ip4Config2.SetData - Call SetData to clear Manual Address." \
+ "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
+} elseif { $R_Status == $EFI_NOT_READY } {
+ set i 0
+ set L_TimeOut 30
+ while { 1 > 0 } {
+ GetVar R_Context
+ if { $R_Context == 1 } {
+ break
+ } elseif { $i == $L_TimeOut } {
+ set assert fail
+ RecordAssertion $assert $Ip4Config2SetDataFunc1AssertionGuid012 \
+ "SetData to clear Manual Address failed.(event hasn't been signaled before TIMEOUT)." \
+ "TIMEOUT value is $L_TimeOut (sec), "
+ SetVar R_Ip4Config2DataType $IP4C2DT(ManualAddress)
+ Ip4Config2->UnregisterDataNotify "@R_Ip4Config2DataType,@R_DoneEvent,&@R_Status"
+ GetAck
+ BS->CloseEvent {@R_DoneEvent,&@R_Status}
+ GetAck
+ EndScope _IP4CONFIG2_SETDATA_FUNC1_CASE2
+ EndLog
+ return
+ }
+ incr i
+ Stall 1
+ }
+} else {
+ set assert fail
+ RecordAssertion $assert $Ip4Config2SetDataFunc1AssertionGuid012 \
+ "IP4Config2.SetData - Call SetData to clear Manual Address." \
+ "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
+
+ SetVar R_Ip4Config2DataType $IP4C2DT(ManualAddress)
+ Ip4Config2->UnregisterDataNotify "@R_Ip4Config2DataType,@R_DoneEvent,&@R_Status"
+ GetAck
+ BS->CloseEvent {@R_DoneEvent,&@R_Status}
+ GetAck
+ EndScope _IP4CONFIG2_SETDATA_FUNC1_CASE2
+ EndLog
+ return
+}
+
+Ip4Config2->UnregisterDataNotify "@R_Ip4Config2DataType,@R_DoneEvent,&@R_Status"
+GetAck
+BS->CloseEvent {@R_DoneEvent,&@R_Status}
+GetAck
+
+SetVar R_Ip4Config2DataSize [Sizeof EFI_IP4_CONFIG2_MANUAL_ADDRESS]
+Ip4Config2->GetData "@R_Ip4Config2DataType,&@R_Ip4Config2DataSize,&@R_Ip4Config2ManualAddress,&@R_Status"
+GetAck
+set assert [VerifyReturnStatus R_Status $EFI_NOT_FOUND]
+RecordAssertion $assert $GenericAssertionGuid \
+ "Ip4Config2.GetData - Call GetData to get Manual Address." \
+ "ReturnStatus - $R_Status, ExpectedStatus - $EFI_NOT_FOUND"
+
+#
+# Set Gateway Address
+#
+
+
+SetVar R_Ip4Config2DataType $IP4C2DT(Gateway)
+SetVar R_Ip4Config2DataSize 0
+
+SetVar R_Context 0
+Ip4Config2->RegisterDataNotify "@R_Ip4Config2DataType,@R_DoneEvent,&@R_Status"
+GetAck
+set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
+RecordAssertion $assert $GenericAssertionGuid \
+ "Ip4Config2.RegisterDataNotify - Register notification event for configuration." \
+ "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
+
+Ip4Config2->SetData "@R_Ip4Config2DataType,@R_Ip4Config2DataSize,NULL,&@R_Status"
+GetAck
+GetVar R_Status
+
+if { $R_Status == $EFI_SUCCESS } {
+ set assert pass
+ RecordAssertion $assert $Ip4Config2SetDataFunc1AssertionGuid013 \
+ "Ip4Config2.SetData - Call SetData to clear Gateway Address." \
+ "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
+} elseif { $R_Status == $EFI_NOT_READY } {
+ set i 0
+ set L_TimeOut 30
+ while { 1 > 0 } {
+ GetVar R_Context
+ if { $R_Context == 1 } {
+ break
+ } elseif { $i == $L_TimeOut } {
+ set assert fail
+ RecordAssertion $assert $Ip4Config2SetDataFunc1AssertionGuid013 \
+ "SetData to clear Gateway Address failed.(event hasn't been signaled before TIMEOUT)." \
+ "TIMEOUT value is $L_TimeOut (sec), "
+ Ip4Config2->UnregisterDataNotify "@R_Ip4Config2DataType,@R_DoneEvent,&@R_Status"
+ GetAck
+ BS->CloseEvent {@R_DoneEvent,&@R_Status}
+ GetAck
+ EndScope _IP4CONFIG2_SETDATA_FUNC1_CASE2
+ EndLog
+ return
+ }
+ incr i
+ Stall 1
+ }
+} else {
+ set assert fail
+ RecordAssertion $assert $Ip4Config2SetDataFunc1AssertionGuid013 \
+ "Ip4Config2.SetData - Call SetData to clear Gateway Address." \
+ "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
+
+ Ip4Config2->UnregisterDataNotify "@R_Ip4Config2DataType,@R_DoneEvent,&@R_Status"
+ GetAck
+ BS->CloseEvent {@R_DoneEvent,&@R_Status}
+ GetAck
+ EndScope _IP4CONFIG2_SETDATA_FUNC1_CASE2
+ EndLog
+ return
+}
+
+Ip4Config2->UnregisterDataNotify "@R_Ip4Config2DataType,@R_DoneEvent,&@R_Status"
+GetAck
+BS->CloseEvent {@R_DoneEvent,&@R_Status}
+GetAck
+
+SetVar R_Ip4Config2DataSize [Sizeof EFI_IPv4_ADDRESS]
+Ip4Config2->GetData "@R_Ip4Config2DataType,&@R_Ip4Config2DataSize,&@R_Ip4Config2Gateway,&@R_Status"
+GetAck
+set assert [VerifyReturnStatus R_Status $EFI_NOT_FOUND]
+RecordAssertion $assert $GenericAssertionGuid \
+ "Ip4Config2.GetData - Call GetData to get Gateway Address." \
+ "ReturnStatus - $R_Status, ExpectedStatus - $EFI_NOT_FOUND"
+
+
+#
+# Check Point : Set Dns Server
+#
+
+SetVar R_Ip4Config2DataType $IP4C2DT(DnsServer)
+SetVar R_Ip4Config2DataSize 0
+
+SetVar R_Context 0
+Ip4Config2->RegisterDataNotify "@R_Ip4Config2DataType,@R_DoneEvent,&@R_Status"
+GetAck
+set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
+RecordAssertion $assert $GenericAssertionGuid \
+ "Ip4Config2.RegisterDataNotify - Register notification event for configuration." \
+ "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
+
+Ip4Config2->SetData "@R_Ip4Config2DataType,@R_Ip4Config2DataSize,NULL,&@R_Status"
+GetAck
+GetVar R_Status
+
+if { $R_Status == $EFI_SUCCESS } {
+ set assert pass
+ RecordAssertion $assert $Ip4Config2SetDataFunc1AssertionGuid014 \
+ "Ip4Config2.SetData - Call SetData to clear Dns Address." \
+ "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
+} elseif { $R_Status == $EFI_NOT_READY } {
+ set i 0
+ set L_TimeOut 30
+ while { 1 > 0 } {
+ GetVar R_Context
+ if { $R_Context == 1 } {
+ break
+ } elseif { $i == $L_TimeOut } {
+ set assert fail
+ RecordAssertion $assert $Ip4Config2SetDataFunc1AssertionGuid014 \
+ "SetData to clear Dns Address failed.(event hasn't been signaled before TIMEOUT)." \
+ "TIMEOUT value is $L_TimeOut (sec), "
+ Ip4Config2->UnregisterDataNotify "@R_Ip4Config2DataType,@R_DoneEvent,&@R_Status"
+ GetAck
+ BS->CloseEvent {@R_DoneEvent,&@R_Status}
+ GetAck
+ EndScope _IP4CONFIG2_SETDATA_FUNC1_CASE2
+ EndLog
+ return
+ }
+ incr i
+ Stall 1
+ }
+} else {
+ set assert fail
+ RecordAssertion $assert $Ip4Config2SetDataFunc1AssertionGuid014 \
+ "Ip4Config2.SetData - Call SetData to clear Dns Address." \
+ "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
+
+ Ip4Config2->UnregisterDataNotify "@R_Ip4Config2DataType,@R_DoneEvent,&@R_Status"
+ GetAck
+ BS->CloseEvent {@R_DoneEvent,&@R_Status}
+ GetAck
+ EndScope _IP4CONFIG2_SETDATA_FUNC1_CASE2
+ EndLog
+ return
+}
+
+Ip4Config2->UnregisterDataNotify "@R_Ip4Config2DataType,@R_DoneEvent,&@R_Status"
+GetAck
+BS->CloseEvent {@R_DoneEvent,&@R_Status}
+GetAck
+
+SetVar R_Ip4Config2DataSize [Sizeof EFI_IPv4_ADDRESS]
+Ip4Config2->GetData "@R_Ip4Config2DataType,&@R_Ip4Config2DataSize,&@R_Ip4Config2DnsServer,&@R_Status"
+GetAck
+set assert [VerifyReturnStatus R_Status $EFI_NOT_FOUND]
+RecordAssertion $assert $GenericAssertionGuid \
+ "Ip4Config2.GetData - Call GetData to get Dns Address." \
+ "ReturnStatus - $R_Status, ExpectedStatus - $EFI_NOT_FOUND"
+
+
+
+EndScope _IP4CONFIG2_SETDATA_FUNC1_CASE2
+
+EndLog
\ No newline at end of file
diff --git a/uefi-sct/EMS/Bin/TestCase/IP6Config/GetData.Conf1.Case1.tcl b/uefi-sct/EMS/Bin/TestCase/IP6Config/GetData.Conf1.Case1.tcl
index a6b788d..beeb2fb 100644
--- a/uefi-sct/EMS/Bin/TestCase/IP6Config/GetData.Conf1.Case1.tcl
+++ b/uefi-sct/EMS/Bin/TestCase/IP6Config/GetData.Conf1.Case1.tcl
@@ -1,72 +1,72 @@
-#
-# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
-# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
-#
-# This program and the accompanying materials
-# are licensed and made available under the terms and conditions of the BSD License
-# which accompanies this distribution. The full text of the license may be found at
-# http://opensource.org/licenses/bsd-license.php
-#
-# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
-# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-#
-################################################################################
-CaseLevel CONFORMANCE
-CaseAttribute AUTO
-CaseVerboseLevel DEFAULT
-set reportfile report.csv
-
-#
-# test case Name, category, description, GUID...
-#
-CaseGuid 11FF93B5-8A85-4770-88C2-99E0AF9AE0AA
-CaseName GetData.Conf1.Case1
-CaseCategory IP6Config
-CaseDescription {GetData must not succeed when data size is NULL.}
-
-################################################################################
-Include IP6Config/Include/Ip6Config.inc.tcl
-
-
-#
-# Begin log ...
-#
-BeginLog
-
-#
-# BeginScope
-#
-BeginScope _IP6CONFIG_GETDATA_CONF1
-
-#
-# Parameter Definition
-# R_ represents "Remote EFI Side Parameter"
-# L_ represents "Local ENTS Side Parameter"
-#
-UINTN R_Status
-UINTN R_Context
-UINTN R_DoneEvent
-UINTN R_Ip6ConfigDataSize
-EFI_IP6_CONFIG_INTERFACE_INFO R_Ip6ConfigInterfaceInfo
-EFI_IP6_CONFIG_INTERFACE_ID R_Ip6ConfigInterfaceId
-UINT32 R_Ip6ConfigPolicy
-UINT32 R_Ip6ConfigDataType
-EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS R_Ip6ConfigDadTransmits
-EFI_IP6_CONFIG_MANUAL_ADDRESS R_Ip6ConfigManualAddress
-
-#
-# Check Point: Call Ip6Config->GetData with datasize is NULL.
-#
-SetVar R_Ip6ConfigDataType $IP6CDT(InterfaceInfo)
-SetVar R_Ip6ConfigDataSize [Sizeof EFI_IP6_CONFIG_INTERFACE_INFO]
-
-Ip6Config->GetData "@R_Ip6ConfigDataType,NULL,&@R_Ip6ConfigInterfaceInfo,&@R_Status"
-GetAck
-set assert [VerifyReturnStatus R_Status $EFI_INVALID_PARAMETER]
-RecordAssertion $assert $Ip6ConfigGetDataConf1AssertionGuid001 \
- "Ip6Config.GetData - Call GetData with DataSize NULL." \
- "ReturnStatus - $R_Status, ExpectedStatus - $EFI_INVALID_PARAMETER"
-
-EndScope _IP6CONFIG_GETDATA_CONF1
-
+#
+# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
+# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
+#
+# This program and the accompanying materials
+# are licensed and made available under the terms and conditions of the BSD License
+# which accompanies this distribution. The full text of the license may be found at
+# http://opensource.org/licenses/bsd-license.php
+#
+# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+#
+################################################################################
+CaseLevel CONFORMANCE
+CaseAttribute AUTO
+CaseVerboseLevel DEFAULT
+set reportfile report.csv
+
+#
+# test case Name, category, description, GUID...
+#
+CaseGuid 11FF93B5-8A85-4770-88C2-99E0AF9AE0AA
+CaseName GetData.Conf1.Case1
+CaseCategory IP6Config
+CaseDescription {GetData must not succeed when data size is NULL.}
+
+################################################################################
+Include IP6Config/Include/Ip6Config.inc.tcl
+
+
+#
+# Begin log ...
+#
+BeginLog
+
+#
+# BeginScope
+#
+BeginScope _IP6CONFIG_GETDATA_CONF1
+
+#
+# Parameter Definition
+# R_ represents "Remote EFI Side Parameter"
+# L_ represents "Local ENTS Side Parameter"
+#
+UINTN R_Status
+UINTN R_Context
+UINTN R_DoneEvent
+UINTN R_Ip6ConfigDataSize
+EFI_IP6_CONFIG_INTERFACE_INFO R_Ip6ConfigInterfaceInfo
+EFI_IP6_CONFIG_INTERFACE_ID R_Ip6ConfigInterfaceId
+UINT32 R_Ip6ConfigPolicy
+UINT32 R_Ip6ConfigDataType
+EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS R_Ip6ConfigDadTransmits
+EFI_IP6_CONFIG_MANUAL_ADDRESS R_Ip6ConfigManualAddress
+
+#
+# Check Point: Call Ip6Config->GetData with datasize is NULL.
+#
+SetVar R_Ip6ConfigDataType $IP6CDT(InterfaceInfo)
+SetVar R_Ip6ConfigDataSize [Sizeof EFI_IP6_CONFIG_INTERFACE_INFO]
+
+Ip6Config->GetData "@R_Ip6ConfigDataType,NULL,&@R_Ip6ConfigInterfaceInfo,&@R_Status"
+GetAck
+set assert [VerifyReturnStatus R_Status $EFI_INVALID_PARAMETER]
+RecordAssertion $assert $Ip6ConfigGetDataConf1AssertionGuid001 \
+ "Ip6Config.GetData - Call GetData with DataSize NULL." \
+ "ReturnStatus - $R_Status, ExpectedStatus - $EFI_INVALID_PARAMETER"
+
+EndScope _IP6CONFIG_GETDATA_CONF1
+
EndLog
\ No newline at end of file
diff --git a/uefi-sct/EMS/Bin/TestCase/IP6Config/GetData.Conf2.Case1.tcl b/uefi-sct/EMS/Bin/TestCase/IP6Config/GetData.Conf2.Case1.tcl
index c095756..6f90a9c 100644
--- a/uefi-sct/EMS/Bin/TestCase/IP6Config/GetData.Conf2.Case1.tcl
+++ b/uefi-sct/EMS/Bin/TestCase/IP6Config/GetData.Conf2.Case1.tcl
@@ -1,71 +1,71 @@
-#
-# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
-# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
-#
-# This program and the accompanying materials
-# are licensed and made available under the terms and conditions of the BSD License
-# which accompanies this distribution. The full text of the license may be found at
-# http://opensource.org/licenses/bsd-license.php
-#
-# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
-# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-#
-################################################################################
-CaseLevel CONFORMANCE
-CaseAttribute AUTO
-CaseVerboseLevel DEFAULT
-set reportfile report.csv
-
-#
-# test case Name, category, description, GUID...
-#
-CaseGuid B4C48D71-EF72-42e0-BD57-4825F7EB7B9F
-CaseName GetData.Conf2.Case1
-CaseCategory IP6Config
-CaseDescription {GetData must not succeed when data is NULL if data size is not zero.}
-
-################################################################################
-Include IP6Config/Include/Ip6Config.inc.tcl
-
-
-#
-# Begin log ...
-#
-BeginLog
-
-#
-# BeginScope
-#
-BeginScope _IP6CONFIG_GETDATA_CONF2
-
-#
-# Parameter Definition
-# R_ represents "Remote EFI Side Parameter"
-# L_ represents "Local ENTS Side Parameter"
-#
-UINTN R_Status
-UINTN R_Context
-UINTN R_DoneEvent
-UINTN R_Ip6ConfigDataSize
-UINT32 R_Ip6ConfigDataType
-EFI_IP6_CONFIG_INTERFACE_INFO R_Ip6ConfigInterfaceInfo
-EFI_IP6_CONFIG_INTERFACE_ID R_Ip6ConfigInterfaceId
-EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS R_Ip6ConfigDadTransmits
-EFI_IP6_CONFIG_MANUAL_ADDRESS R_Ip6ConfigManualAddress
-
-#
-# Check Point: Call Ip6Config->GetData with data is NULL.
-#
-SetVar R_Ip6ConfigDataType $IP6CDT(InterfaceInfo)
-SetVar R_Ip6ConfigDataSize [Sizeof EFI_IP6_CONFIG_INTERFACE_INFO]
-
-Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,NULL,&@R_Status"
-GetAck
-set assert [VerifyReturnStatus R_Status $EFI_INVALID_PARAMETER]
-RecordAssertion $assert $Ip6ConfigGetDataConf2AssertionGuid001 \
- "Ip6Config.GetData - Call GetData with Data NULL." \
- "ReturnStatus - $R_Status, ExpectedStatus - $EFI_INVALID_PARAMETER"
-
-EndScope _IP6CONFIG_GETDATA_CONF2
-
+#
+# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
+# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
+#
+# This program and the accompanying materials
+# are licensed and made available under the terms and conditions of the BSD License
+# which accompanies this distribution. The full text of the license may be found at
+# http://opensource.org/licenses/bsd-license.php
+#
+# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+#
+################################################################################
+CaseLevel CONFORMANCE
+CaseAttribute AUTO
+CaseVerboseLevel DEFAULT
+set reportfile report.csv
+
+#
+# test case Name, category, description, GUID...
+#
+CaseGuid B4C48D71-EF72-42e0-BD57-4825F7EB7B9F
+CaseName GetData.Conf2.Case1
+CaseCategory IP6Config
+CaseDescription {GetData must not succeed when data is NULL if data size is not zero.}
+
+################################################################################
+Include IP6Config/Include/Ip6Config.inc.tcl
+
+
+#
+# Begin log ...
+#
+BeginLog
+
+#
+# BeginScope
+#
+BeginScope _IP6CONFIG_GETDATA_CONF2
+
+#
+# Parameter Definition
+# R_ represents "Remote EFI Side Parameter"
+# L_ represents "Local ENTS Side Parameter"
+#
+UINTN R_Status
+UINTN R_Context
+UINTN R_DoneEvent
+UINTN R_Ip6ConfigDataSize
+UINT32 R_Ip6ConfigDataType
+EFI_IP6_CONFIG_INTERFACE_INFO R_Ip6ConfigInterfaceInfo
+EFI_IP6_CONFIG_INTERFACE_ID R_Ip6ConfigInterfaceId
+EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS R_Ip6ConfigDadTransmits
+EFI_IP6_CONFIG_MANUAL_ADDRESS R_Ip6ConfigManualAddress
+
+#
+# Check Point: Call Ip6Config->GetData with data is NULL.
+#
+SetVar R_Ip6ConfigDataType $IP6CDT(InterfaceInfo)
+SetVar R_Ip6ConfigDataSize [Sizeof EFI_IP6_CONFIG_INTERFACE_INFO]
+
+Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,NULL,&@R_Status"
+GetAck
+set assert [VerifyReturnStatus R_Status $EFI_INVALID_PARAMETER]
+RecordAssertion $assert $Ip6ConfigGetDataConf2AssertionGuid001 \
+ "Ip6Config.GetData - Call GetData with Data NULL." \
+ "ReturnStatus - $R_Status, ExpectedStatus - $EFI_INVALID_PARAMETER"
+
+EndScope _IP6CONFIG_GETDATA_CONF2
+
EndLog
\ No newline at end of file
diff --git a/uefi-sct/EMS/Bin/TestCase/IP6Config/GetData.Conf3.Case1.tcl b/uefi-sct/EMS/Bin/TestCase/IP6Config/GetData.Conf3.Case1.tcl
index c90d442..5688648 100644
--- a/uefi-sct/EMS/Bin/TestCase/IP6Config/GetData.Conf3.Case1.tcl
+++ b/uefi-sct/EMS/Bin/TestCase/IP6Config/GetData.Conf3.Case1.tcl
@@ -1,395 +1,395 @@
-#
-# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
-# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
-#
-# This program and the accompanying materials
-# are licensed and made available under the terms and conditions of the BSD License
-# which accompanies this distribution. The full text of the license may be found at
-# http://opensource.org/licenses/bsd-license.php
-#
-# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
-# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-#
-################################################################################
-CaseLevel CONFORMANCE
-CaseAttribute AUTO
-CaseVerboseLevel DEFAULT
-set reportfile report.csv
-
-#
-# test case Name, category, description, GUID...
-#
-CaseGuid 7B341FC4-1F10-4851-83AD-103A56B0EC35
-CaseName GetData.Conf3.Case1
-CaseCategory IP6Config
-CaseDescription {GetData must not succeed when DataSize is too small for the data type.}
-
-################################################################################
-Include IP6Config/Include/Ip6Config.inc.tcl
-
-
-#
-# Begin log ...
-#
-BeginLog
-
-#
-# BeginScope
-#
-BeginScope _IP6CONFIG_GETDATA_CONF3
-
-#
-# Parameter Definition
-# R_ represents "Remote EFI Side Parameter"
-# L_ represents "Local ENTS Side Parameter"
-#
-UINTN R_Status
-UINTN R_Context
-UINTN R_Context1
-UINTN R_DoneEvent
-UINTN R_DoneEvent1
-UINTN R_Ip6ConfigDataSize
-UINT32 R_Ip6ConfigDataType
-EFI_IP6_CONFIG_INTERFACE_INFO R_Ip6ConfigInterfaceInfo
-EFI_IP6_CONFIG_INTERFACE_ID R_Ip6ConfigInterfaceId
-UINT32 R_Ip6ConfigPolicy
-EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS R_Ip6ConfigDadTransmits
-
-#
-# Check Point: Call Ip6Config->SetData to set manual policy
-#
-SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
-SetVar R_Ip6ConfigDataSize [Sizeof UINT32]
-SetVar R_Ip6ConfigPolicy $IP6CP(Manual)
-
-SetVar R_Context 0
-BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context,\
- &@R_DoneEvent, &@R_Status"
-GetAck
-set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
-RecordAssertion $assert $GenericAssertionGuid \
- "BS.CreateEvent." \
- "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
-
-Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
-GetAck
-set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
-RecordAssertion $assert $GenericAssertionGuid \
- "Ip6Config.RegisterDataNotify - Register notification event for configuration." \
- "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
-
-Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_Status"
-GetAck
-GetVar R_Status
-if { $R_Status == $EFI_SUCCESS } {
- set assert pass
- RecordAssertion $assert $GenericAssertionGuid \
- "Ip6Config.SetData - Call SetData to set manual policy." \
- "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
-} elseif { $R_Status == $EFI_NOT_READY } {
- set i 0
- set L_TimeOut 30
- while { 1 > 0 } {
- GetVar R_Context
- if { $R_Context == 1 } {
- break
- } elseif { $i == $L_TimeOut } {
- set assert fail
-
- RecordAssertion $assert $GenericAssertionGuid \
- "SetData failed.(event hasn't been signaled before TIMEOUT)." \
- "TIMEOUT value is $L_TimeOut (sec), "
- SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
- Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
- GetAck
- BS->CloseEvent {@R_DoneEvent,&@R_Status}
- GetAck
- EndScope _IP6CONFIG_GETDATA_CONF3
- EndLog
- return
- }
- incr i
- Stall 1
- }
-} else {
- set assert fail
- RecordAssertion $assert $GenericAssertionGuid \
- "Ip6Config.SetData - Call SetData to set manual policy." \
- "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
-
- SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
- Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
- GetAck
- BS->CloseEvent {@R_DoneEvent,&@R_Status}
- GetAck
- EndScope _IP6CONFIG_GETDATA_CONF3
- EndLog
- return
-}
-
-Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_Status"
-GetAck
-set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
-RecordAssertion $assert $GenericAssertionGuid \
- "Ip6Config.GetData - Call GetData to get policy value." \
- "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
-GetVar R_Ip6ConfigPolicy
-if { $R_Ip6ConfigPolicy == $IP6CP(Manual) } {
- set assert pass
-} else {
- set assert fail
-
- RecordAssertion $assert $GenericAssertionGuid \
- "Set manual policy failure (event is signaled correctly and data correct)."
- SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
- Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
- GetAck
- BS->CloseEvent {@R_DoneEvent,&@R_Status}
- GetAck
- EndScope _IP6CONFIG_GETDATA_CONF3
- EndLog
- return
-}
-RecordAssertion $assert $GenericAssertionGuid \
- "Set manual policy succeeds(event is signaled correctly and data correct)."
-
-#
-# Check Point : Set Manual Address with valid value
-#
-EFI_IP6_CONFIG_MANUAL_ADDRESS R_Temp_Ip6ConfigManualAddress
-
-set L_ManualListLen 1
-EFI_IP6_CONFIG_MANUAL_ADDRESS R_Ip6ConfigManualAddress
-set L_UnitLen [Sizeof EFI_IP6_CONFIG_MANUAL_ADDRESS]
-set L_ListLen [expr {$L_UnitLen * $L_ManualListLen}]
-SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
-SetVar R_Ip6ConfigDataSize $L_ListLen
-SetVar R_Temp_Ip6ConfigManualAddress.IsAnycast FALSE
-SetVar R_Temp_Ip6ConfigManualAddress.PrefixLength 64
-SetIpv6Address R_Temp_Ip6ConfigManualAddress.Address "2002::5001"
-SetVar R_Ip6ConfigManualAddress @R_Temp_Ip6ConfigManualAddress
-
-SetVar R_Context1 0
-BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context1,\
- &@R_DoneEvent1, &@R_Status"
-GetAck
-set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
-RecordAssertion $assert $GenericAssertionGuid \
- "BS.CreateEvent." \
- "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
-
-Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
-GetAck
-set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
-RecordAssertion $assert $GenericAssertionGuid \
- "Ip6Config.RegisterDataNotify - Register notification event for configuration." \
- "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
-
-Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigManualAddress,&@R_Status"
-GetAck
-GetVar R_Status
-if { $R_Status == $EFI_SUCCESS } {
- set assert pass
- RecordAssertion $assert $GenericAssertionGuid \
- "Ip6Config.SetData - Call SetData with valid value." \
- "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
-} elseif { $R_Status == $EFI_NOT_READY } {
- set i 0
- set L_TimeOut 30
- while { 1 > 0 } {
- GetVar R_Context1
- if { $R_Context1 == 1 } {
- break
- } elseif { $i == $L_TimeOut } {
- set assert fail
-
- RecordAssertion $assert $GenericAssertionGuid \
- "SetData failed.(event hasn't been signaled before TIMEOUT)." \
- "TIMEOUT value is $L_TimeOut (sec), "
- SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
- Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
- GetAck
- BS->CloseEvent {@R_DoneEvent1,&@R_Status}
- GetAck
- SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
- Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
- GetAck
- BS->CloseEvent {@R_DoneEvent,&@R_Status}
- GetAck
- EndScope _IP6CONFIG_GETDATA_CONF3
- EndLog
- return
- }
- incr i
- Stall 1
- }
-} else {
- set assert fail
- RecordAssertion $assert $GenericAssertionGuid \
- "Ip6Config.SetData - Call SetData to set manual address." \
- "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
-
- SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
- Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
- GetAck
- BS->CloseEvent {@R_DoneEvent1,&@R_Status}
- GetAck
- SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
- Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
- GetAck
- BS->CloseEvent {@R_DoneEvent,&@R_Status}
- GetAck
- EndScope _IP6CONFIG_GETDATA_CONF3
- EndLog
- return
-}
-
-#
-# Check Point : Get Manual Address with datasize too small
-#
-SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
-SetVar R_Ip6ConfigDataSize 16
-
-Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigManualAddress,&@R_Status"
-GetAck
-set assert [VerifyReturnStatus R_Status $EFI_BUFFER_TOO_SMALL]
-RecordAssertion $assert $Ip6ConfigGetDataConf3AssertionGuid001 \
- "Ip6Config.GetData - Call GetData with the datasize too small." \
- "ReturnStatus - $R_Status, ExpectedStatus - $EFI_BUFFER_TOO_SMALL"
-
-GetVar R_Ip6ConfigDataSize
-set L_ObtainedSize [ expr { $R_Ip6ConfigDataSize } ]
-set L_DesiredSize [ Sizeof EFI_IP6_CONFIG_MANUAL_ADDRESS ]
-if { [ expr { $L_ObtainedSize % $L_DesiredSize } ] == 0 } {
- set assert pass
-} else {
- set assert fail
-}
-RecordAssertion $assert $Ip6ConfigGetDataConf3AssertionGuid002 \
- "Ip6Config.GetData - Correctly Modify the DataSize." \
- "ReturnSize - $L_ObtainedSize, ExpectedSize - $L_DesiredSize"
-
-#
-# Clean up
-#
-
-#
-# Set automatic policy (this will clean up all address information configured)
-#
-SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
-SetVar R_Ip6ConfigDataSize [Sizeof UINT32]
-SetVar R_Ip6ConfigPolicy $IP6CP(Automatic)
-
-SetVar R_Context 0
-
-Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_Status"
-GetAck
-GetVar R_Status
-if { $R_Status == $EFI_SUCCESS } {
- set assert pass
-} elseif { $R_Status == $EFI_NOT_READY } {
- set i 0
- set L_TimeOut 30
- set assert pass
- while { 1 > 0 } {
- GetVar R_Context
- if { $R_Context == 1 } {
- break
- } elseif { $i == $L_TimeOut } {
- set assert fail
-
- SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
- Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
- GetAck
- BS->CloseEvent {@R_DoneEvent,&@R_Status}
- GetAck
- SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
- Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
- GetAck
- BS->CloseEvent {@R_DoneEvent1,&@R_Status}
- GetAck
-
- EndScope _IP6CONFIG_GETDATA_CONF3
- EndLog
- return
- }
- incr i
- Stall 1
- }
-} else {
- set assert fail
-
- SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
- Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
- GetAck
- BS->CloseEvent {@R_DoneEvent,&@R_Status}
- GetAck
- SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
- Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
- GetAck
- BS->CloseEvent {@R_DoneEvent1,&@R_Status}
- GetAck
-
- EndScope _IP6CONFIG_GETDATA_CONF3
- EndLog
- return
-}
-
-Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_Status"
-GetAck
-GetVar R_Ip6ConfigPolicy
-if { $R_Ip6ConfigPolicy == $IP6CP(Automatic) } {
- set assert pass
-} else {
- set assert fail
-
- RecordAssertion $assert $GenericAssertionGuid \
- "Ip6Config.SetData - Set automatic policy to clean up the former configuration." \
- "TimeUsed - $i, TimeOut Value- $L_TimeOut"
- SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
- Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
- GetAck
- BS->CloseEvent {@R_DoneEvent,&@R_Status}
- GetAck
- SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
- Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
- GetAck
- BS->CloseEvent {@R_DoneEvent1,&@R_Status}
- GetAck
-
- EndScope _IP6CONFIG_GETDATA_CONF3
- EndLog
- return
-}
-
-RecordAssertion $assert $GenericAssertionGuid \
- "Ip6Config.SetData - Set automatic policy to clean up the former configuration." \
- "TimeUsed - $i, TimeOut Value- $L_TimeOut"
-
-#
-# Unregister Event for Manual Address and close event
-#
-SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
-Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
-GetAck
-set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
-RecordAssertion $assert $GenericAssertionGuid \
- "Ip6Config.UnregisterDataNotify - Unregister notification event for configuration." \
- "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
-
-BS->CloseEvent {@R_DoneEvent1,&@R_Status}
-GetAck
-SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
-Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
-GetAck
-set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
-RecordAssertion $assert $GenericAssertionGuid \
- "Ip6Config.UnregisterDataNotify - Unregister notification event for configuration." \
- "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
-
-BS->CloseEvent {@R_DoneEvent,&@R_Status}
-GetAck
-
-EndScope _IP6CONFIG_GETDATA_CONF3
-
+#
+# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
+# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
+#
+# This program and the accompanying materials
+# are licensed and made available under the terms and conditions of the BSD License
+# which accompanies this distribution. The full text of the license may be found at
+# http://opensource.org/licenses/bsd-license.php
+#
+# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+#
+################################################################################
+CaseLevel CONFORMANCE
+CaseAttribute AUTO
+CaseVerboseLevel DEFAULT
+set reportfile report.csv
+
+#
+# test case Name, category, description, GUID...
+#
+CaseGuid 7B341FC4-1F10-4851-83AD-103A56B0EC35
+CaseName GetData.Conf3.Case1
+CaseCategory IP6Config
+CaseDescription {GetData must not succeed when DataSize is too small for the data type.}
+
+################################################################################
+Include IP6Config/Include/Ip6Config.inc.tcl
+
+
+#
+# Begin log ...
+#
+BeginLog
+
+#
+# BeginScope
+#
+BeginScope _IP6CONFIG_GETDATA_CONF3
+
+#
+# Parameter Definition
+# R_ represents "Remote EFI Side Parameter"
+# L_ represents "Local ENTS Side Parameter"
+#
+UINTN R_Status
+UINTN R_Context
+UINTN R_Context1
+UINTN R_DoneEvent
+UINTN R_DoneEvent1
+UINTN R_Ip6ConfigDataSize
+UINT32 R_Ip6ConfigDataType
+EFI_IP6_CONFIG_INTERFACE_INFO R_Ip6ConfigInterfaceInfo
+EFI_IP6_CONFIG_INTERFACE_ID R_Ip6ConfigInterfaceId
+UINT32 R_Ip6ConfigPolicy
+EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS R_Ip6ConfigDadTransmits
+
+#
+# Check Point: Call Ip6Config->SetData to set manual policy
+#
+SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
+SetVar R_Ip6ConfigDataSize [Sizeof UINT32]
+SetVar R_Ip6ConfigPolicy $IP6CP(Manual)
+
+SetVar R_Context 0
+BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context,\
+ &@R_DoneEvent, &@R_Status"
+GetAck
+set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
+RecordAssertion $assert $GenericAssertionGuid \
+ "BS.CreateEvent." \
+ "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
+
+Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
+GetAck
+set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
+RecordAssertion $assert $GenericAssertionGuid \
+ "Ip6Config.RegisterDataNotify - Register notification event for configuration." \
+ "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
+
+Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_Status"
+GetAck
+GetVar R_Status
+if { $R_Status == $EFI_SUCCESS } {
+ set assert pass
+ RecordAssertion $assert $GenericAssertionGuid \
+ "Ip6Config.SetData - Call SetData to set manual policy." \
+ "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
+} elseif { $R_Status == $EFI_NOT_READY } {
+ set i 0
+ set L_TimeOut 30
+ while { 1 > 0 } {
+ GetVar R_Context
+ if { $R_Context == 1 } {
+ break
+ } elseif { $i == $L_TimeOut } {
+ set assert fail
+
+ RecordAssertion $assert $GenericAssertionGuid \
+ "SetData failed.(event hasn't been signaled before TIMEOUT)." \
+ "TIMEOUT value is $L_TimeOut (sec), "
+ SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
+ Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
+ GetAck
+ BS->CloseEvent {@R_DoneEvent,&@R_Status}
+ GetAck
+ EndScope _IP6CONFIG_GETDATA_CONF3
+ EndLog
+ return
+ }
+ incr i
+ Stall 1
+ }
+} else {
+ set assert fail
+ RecordAssertion $assert $GenericAssertionGuid \
+ "Ip6Config.SetData - Call SetData to set manual policy." \
+ "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
+
+ SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
+ Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
+ GetAck
+ BS->CloseEvent {@R_DoneEvent,&@R_Status}
+ GetAck
+ EndScope _IP6CONFIG_GETDATA_CONF3
+ EndLog
+ return
+}
+
+Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_Status"
+GetAck
+set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
+RecordAssertion $assert $GenericAssertionGuid \
+ "Ip6Config.GetData - Call GetData to get policy value." \
+ "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
+GetVar R_Ip6ConfigPolicy
+if { $R_Ip6ConfigPolicy == $IP6CP(Manual) } {
+ set assert pass
+} else {
+ set assert fail
+
+ RecordAssertion $assert $GenericAssertionGuid \
+ "Set manual policy failure (event is signaled correctly and data correct)."
+ SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
+ Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
+ GetAck
+ BS->CloseEvent {@R_DoneEvent,&@R_Status}
+ GetAck
+ EndScope _IP6CONFIG_GETDATA_CONF3
+ EndLog
+ return
+}
+RecordAssertion $assert $GenericAssertionGuid \
+ "Set manual policy succeeds(event is signaled correctly and data correct)."
+
+#
+# Check Point : Set Manual Address with valid value
+#
+EFI_IP6_CONFIG_MANUAL_ADDRESS R_Temp_Ip6ConfigManualAddress
+
+set L_ManualListLen 1
+EFI_IP6_CONFIG_MANUAL_ADDRESS R_Ip6ConfigManualAddress
+set L_UnitLen [Sizeof EFI_IP6_CONFIG_MANUAL_ADDRESS]
+set L_ListLen [expr {$L_UnitLen * $L_ManualListLen}]
+SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
+SetVar R_Ip6ConfigDataSize $L_ListLen
+SetVar R_Temp_Ip6ConfigManualAddress.IsAnycast FALSE
+SetVar R_Temp_Ip6ConfigManualAddress.PrefixLength 64
+SetIpv6Address R_Temp_Ip6ConfigManualAddress.Address "2002::5001"
+SetVar R_Ip6ConfigManualAddress @R_Temp_Ip6ConfigManualAddress
+
+SetVar R_Context1 0
+BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context1,\
+ &@R_DoneEvent1, &@R_Status"
+GetAck
+set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
+RecordAssertion $assert $GenericAssertionGuid \
+ "BS.CreateEvent." \
+ "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
+
+Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
+GetAck
+set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
+RecordAssertion $assert $GenericAssertionGuid \
+ "Ip6Config.RegisterDataNotify - Register notification event for configuration." \
+ "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
+
+Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigManualAddress,&@R_Status"
+GetAck
+GetVar R_Status
+if { $R_Status == $EFI_SUCCESS } {
+ set assert pass
+ RecordAssertion $assert $GenericAssertionGuid \
+ "Ip6Config.SetData - Call SetData with valid value." \
+ "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
+} elseif { $R_Status == $EFI_NOT_READY } {
+ set i 0
+ set L_TimeOut 30
+ while { 1 > 0 } {
+ GetVar R_Context1
+ if { $R_Context1 == 1 } {
+ break
+ } elseif { $i == $L_TimeOut } {
+ set assert fail
+
+ RecordAssertion $assert $GenericAssertionGuid \
+ "SetData failed.(event hasn't been signaled before TIMEOUT)." \
+ "TIMEOUT value is $L_TimeOut (sec), "
+ SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
+ Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
+ GetAck
+ BS->CloseEvent {@R_DoneEvent1,&@R_Status}
+ GetAck
+ SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
+ Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
+ GetAck
+ BS->CloseEvent {@R_DoneEvent,&@R_Status}
+ GetAck
+ EndScope _IP6CONFIG_GETDATA_CONF3
+ EndLog
+ return
+ }
+ incr i
+ Stall 1
+ }
+} else {
+ set assert fail
+ RecordAssertion $assert $GenericAssertionGuid \
+ "Ip6Config.SetData - Call SetData to set manual address." \
+ "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
+
+ SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
+ Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
+ GetAck
+ BS->CloseEvent {@R_DoneEvent1,&@R_Status}
+ GetAck
+ SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
+ Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
+ GetAck
+ BS->CloseEvent {@R_DoneEvent,&@R_Status}
+ GetAck
+ EndScope _IP6CONFIG_GETDATA_CONF3
+ EndLog
+ return
+}
+
+#
+# Check Point : Get Manual Address with datasize too small
+#
+SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
+SetVar R_Ip6ConfigDataSize 16
+
+Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigManualAddress,&@R_Status"
+GetAck
+set assert [VerifyReturnStatus R_Status $EFI_BUFFER_TOO_SMALL]
+RecordAssertion $assert $Ip6ConfigGetDataConf3AssertionGuid001 \
+ "Ip6Config.GetData - Call GetData with the datasize too small." \
+ "ReturnStatus - $R_Status, ExpectedStatus - $EFI_BUFFER_TOO_SMALL"
+
+GetVar R_Ip6ConfigDataSize
+set L_ObtainedSize [ expr { $R_Ip6ConfigDataSize } ]
+set L_DesiredSize [ Sizeof EFI_IP6_CONFIG_MANUAL_ADDRESS ]
+if { [ expr { $L_ObtainedSize % $L_DesiredSize } ] == 0 } {
+ set assert pass
+} else {
+ set assert fail
+}
+RecordAssertion $assert $Ip6ConfigGetDataConf3AssertionGuid002 \
+ "Ip6Config.GetData - Correctly Modify the DataSize." \
+ "ReturnSize - $L_ObtainedSize, ExpectedSize - $L_DesiredSize"
+
+#
+# Clean up
+#
+
+#
+# Set automatic policy (this will clean up all address information configured)
+#
+SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
+SetVar R_Ip6ConfigDataSize [Sizeof UINT32]
+SetVar R_Ip6ConfigPolicy $IP6CP(Automatic)
+
+SetVar R_Context 0
+
+Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_Status"
+GetAck
+GetVar R_Status
+if { $R_Status == $EFI_SUCCESS } {
+ set assert pass
+} elseif { $R_Status == $EFI_NOT_READY } {
+ set i 0
+ set L_TimeOut 30
+ set assert pass
+ while { 1 > 0 } {
+ GetVar R_Context
+ if { $R_Context == 1 } {
+ break
+ } elseif { $i == $L_TimeOut } {
+ set assert fail
+
+ SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
+ Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
+ GetAck
+ BS->CloseEvent {@R_DoneEvent,&@R_Status}
+ GetAck
+ SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
+ Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
+ GetAck
+ BS->CloseEvent {@R_DoneEvent1,&@R_Status}
+ GetAck
+
+ EndScope _IP6CONFIG_GETDATA_CONF3
+ EndLog
+ return
+ }
+ incr i
+ Stall 1
+ }
+} else {
+ set assert fail
+
+ SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
+ Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
+ GetAck
+ BS->CloseEvent {@R_DoneEvent,&@R_Status}
+ GetAck
+ SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
+ Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
+ GetAck
+ BS->CloseEvent {@R_DoneEvent1,&@R_Status}
+ GetAck
+
+ EndScope _IP6CONFIG_GETDATA_CONF3
+ EndLog
+ return
+}
+
+Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_Status"
+GetAck
+GetVar R_Ip6ConfigPolicy
+if { $R_Ip6ConfigPolicy == $IP6CP(Automatic) } {
+ set assert pass
+} else {
+ set assert fail
+
+ RecordAssertion $assert $GenericAssertionGuid \
+ "Ip6Config.SetData - Set automatic policy to clean up the former configuration." \
+ "TimeUsed - $i, TimeOut Value- $L_TimeOut"
+ SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
+ Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
+ GetAck
+ BS->CloseEvent {@R_DoneEvent,&@R_Status}
+ GetAck
+ SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
+ Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
+ GetAck
+ BS->CloseEvent {@R_DoneEvent1,&@R_Status}
+ GetAck
+
+ EndScope _IP6CONFIG_GETDATA_CONF3
+ EndLog
+ return
+}
+
+RecordAssertion $assert $GenericAssertionGuid \
+ "Ip6Config.SetData - Set automatic policy to clean up the former configuration." \
+ "TimeUsed - $i, TimeOut Value- $L_TimeOut"
+
+#
+# Unregister Event for Manual Address and close event
+#
+SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
+Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
+GetAck
+set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
+RecordAssertion $assert $GenericAssertionGuid \
+ "Ip6Config.UnregisterDataNotify - Unregister notification event for configuration." \
+ "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
+
+BS->CloseEvent {@R_DoneEvent1,&@R_Status}
+GetAck
+SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
+Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
+GetAck
+set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
+RecordAssertion $assert $GenericAssertionGuid \
+ "Ip6Config.UnregisterDataNotify - Unregister notification event for configuration." \
+ "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
+
+BS->CloseEvent {@R_DoneEvent,&@R_Status}
+GetAck
+
+EndScope _IP6CONFIG_GETDATA_CONF3
+
EndLog
\ No newline at end of file
diff --git a/uefi-sct/EMS/Bin/TestCase/IP6Config/GetData.Conf4.Case1.tcl b/uefi-sct/EMS/Bin/TestCase/IP6Config/GetData.Conf4.Case1.tcl
index e36cdfc..bd38be0 100644
--- a/uefi-sct/EMS/Bin/TestCase/IP6Config/GetData.Conf4.Case1.tcl
+++ b/uefi-sct/EMS/Bin/TestCase/IP6Config/GetData.Conf4.Case1.tcl
@@ -1,73 +1,73 @@
-#
-# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
-# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
-#
-# This program and the accompanying materials
-# are licensed and made available under the terms and conditions of the BSD License
-# which accompanies this distribution. The full text of the license may be found at
-# http://opensource.org/licenses/bsd-license.php
-#
-# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
-# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-#
-################################################################################
-CaseLevel CONFORMANCE
-CaseAttribute AUTO
-CaseVerboseLevel DEFAULT
-set reportfile report.csv
-
-#
-# test case Name, category, description, GUID...
-#
-CaseGuid F340A957-9345-478d-BE53-5F7C561C1866
-CaseName GetData.Conf4.Case1
-CaseCategory IP6Config
-CaseDescription {GetData must not succeed when data type is not found.}
-
-################################################################################
-Include IP6Config/Include/Ip6Config.inc.tcl
-
-
-#
-# Begin log ...
-#
-BeginLog
-
-#
-# BeginScope
-#
-BeginScope _IP6CONFIG_GETDATA_CONF4
-
-#
-# Parameter Definition
-# R_ represents "Remote EFI Side Parameter"
-# L_ represents "Local ENTS Side Parameter"
-#
-UINTN R_Status
-UINTN R_Context
-UINTN R_DoneEvent
-UINTN R_Ip6ConfigDataSize
-UINT32 R_Ip6ConfigDataType
-UINTN R_Ip6ConfigMaximumType
-EFI_IP6_CONFIG_INTERFACE_INFO R_Ip6ConfigInterfaceInfo
-EFI_IP6_CONFIG_INTERFACE_ID R_Ip6ConfigInterfaceId
-UINT32 R_Ip6ConfigPolicy
-EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS R_Ip6ConfigDadTransmits
-EFI_IP6_CONFIG_MANUAL_ADDRESS R_Ip6ConfigManualAddress
-
-#
-# Check Point: Call Ip6Config->GetData with the date type not existing.
-#
-SetVar R_Ip6ConfigDataType $IP6CDT(Maximum)
-SetVar R_Ip6ConfigDataSize [Sizeof UINT32]
-
-Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigMaximumType,&@R_Status"
-GetAck
-set assert [VerifyReturnStatus R_Status $EFI_NOT_FOUND]
-RecordAssertion $assert $Ip6ConfigGetDataConf4AssertionGuid001 \
- "Ip6Config.GetData - Call GetData with Datatype not existing." \
- "ReturnStatus - $R_Status, ExpectedStatus - $EFI_NOT_FOUND"
-
-EndScope _IP6CONFIG_GETDATA_CONF4
-
+#
+# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
+# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
+#
+# This program and the accompanying materials
+# are licensed and made available under the terms and conditions of the BSD License
+# which accompanies this distribution. The full text of the license may be found at
+# http://opensource.org/licenses/bsd-license.php
+#
+# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+#
+################################################################################
+CaseLevel CONFORMANCE
+CaseAttribute AUTO
+CaseVerboseLevel DEFAULT
+set reportfile report.csv
+
+#
+# test case Name, category, description, GUID...
+#
+CaseGuid F340A957-9345-478d-BE53-5F7C561C1866
+CaseName GetData.Conf4.Case1
+CaseCategory IP6Config
+CaseDescription {GetData must not succeed when data type is not found.}
+
+################################################################################
+Include IP6Config/Include/Ip6Config.inc.tcl
+
+
+#
+# Begin log ...
+#
+BeginLog
+
+#
+# BeginScope
+#
+BeginScope _IP6CONFIG_GETDATA_CONF4
+
+#
+# Parameter Definition
+# R_ represents "Remote EFI Side Parameter"
+# L_ represents "Local ENTS Side Parameter"
+#
+UINTN R_Status
+UINTN R_Context
+UINTN R_DoneEvent
+UINTN R_Ip6ConfigDataSize
+UINT32 R_Ip6ConfigDataType
+UINTN R_Ip6ConfigMaximumType
+EFI_IP6_CONFIG_INTERFACE_INFO R_Ip6ConfigInterfaceInfo
+EFI_IP6_CONFIG_INTERFACE_ID R_Ip6ConfigInterfaceId
+UINT32 R_Ip6ConfigPolicy
+EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS R_Ip6ConfigDadTransmits
+EFI_IP6_CONFIG_MANUAL_ADDRESS R_Ip6ConfigManualAddress
+
+#
+# Check Point: Call Ip6Config->GetData with the date type not existing.
+#
+SetVar R_Ip6ConfigDataType $IP6CDT(Maximum)
+SetVar R_Ip6ConfigDataSize [Sizeof UINT32]
+
+Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigMaximumType,&@R_Status"
+GetAck
+set assert [VerifyReturnStatus R_Status $EFI_NOT_FOUND]
+RecordAssertion $assert $Ip6ConfigGetDataConf4AssertionGuid001 \
+ "Ip6Config.GetData - Call GetData with Datatype not existing." \
+ "ReturnStatus - $R_Status, ExpectedStatus - $EFI_NOT_FOUND"
+
+EndScope _IP6CONFIG_GETDATA_CONF4
+
EndLog
\ No newline at end of file
diff --git a/uefi-sct/EMS/Bin/TestCase/IP6Config/GetData.Conf5.Case1.tcl b/uefi-sct/EMS/Bin/TestCase/IP6Config/GetData.Conf5.Case1.tcl
index c39323f..c186520 100644
--- a/uefi-sct/EMS/Bin/TestCase/IP6Config/GetData.Conf5.Case1.tcl
+++ b/uefi-sct/EMS/Bin/TestCase/IP6Config/GetData.Conf5.Case1.tcl
@@ -1,492 +1,492 @@
-#
-# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
-# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
-#
-# This program and the accompanying materials
-# are licensed and made available under the terms and conditions of the BSD License
-# which accompanies this distribution. The full text of the license may be found at
-# http://opensource.org/licenses/bsd-license.php
-#
-# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
-# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-#
-################################################################################
-CaseLevel CONFORMANCE
-CaseAttribute AUTO
-CaseVerboseLevel DEFAULT
-set reportfile report.csv
-
-#
-# test case Name, category, description, GUID...
-#
-CaseGuid 6638523D-470B-4c50-AE75-DE0CE6854DE8
-CaseName GetData.Conf5.Case1
-CaseCategory IP6Config
-CaseDescription {GetData must not succeed when the last asynchronous process for the data type has not been finished yet.}
-
-################################################################################
-Include IP6Config/Include/Ip6Config.inc.tcl
-
-
-#
-# Begin log ...
-#
-BeginLog
-
-#
-# BeginScope
-#
-BeginScope _IP6CONFIG_GETDATA_CONF5
-
-#
-# Parameter Definition
-# R_ represents "Remote EFI Side Parameter"
-# L_ represents "Local ENTS Side Parameter"
-#
-UINTN R_Status
-UINTN R_Context
-UINTN R_DoneEvent
-UINTN R_Context1
-UINTN R_DoneEvent1
-UINTN R_Ip6ConfigDataSize
-UINT32 R_Ip6ConfigDataType
-EFI_IP6_CONFIG_INTERFACE_INFO R_Ip6ConfigInterfaceInfo
-EFI_IP6_CONFIG_INTERFACE_ID R_Ip6ConfigInterfaceId
-UINT32 R_Ip6ConfigPolicy
-EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS R_Ip6ConfigDadTransmits
-
-#
-# Check Point: Call Ip6Config->SetData to set manual policy
-#
-SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
-SetVar R_Ip6ConfigDataSize [Sizeof UINT32]
-SetVar R_Ip6ConfigPolicy $IP6CP(Manual)
-
-SetVar R_Context 0
-BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context,\
- &@R_DoneEvent, &@R_Status"
-GetAck
-set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
-RecordAssertion $assert $GenericAssertionGuid \
- "BS.CreateEvent." \
- "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
-
-Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
-GetAck
-set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
-RecordAssertion $assert $GenericAssertionGuid \
- "Ip6Config.RegisterDataNotify - Register notification event for configuration." \
- "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
-
-Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_Status"
-GetAck
-GetVar R_Status
-if { $R_Status == $EFI_SUCCESS } {
- set assert pass
- RecordAssertion $assert $GenericAssertionGuid \
- "Ip6Config.SetData - Call SetData to set manual policy." \
- "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
-} elseif { $R_Status == $EFI_NOT_READY } {
- set i 0
- set L_TimeOut 30
- while { 1 > 0 } {
- GetVar R_Context
- if { $R_Context == 1 } {
- break
- } elseif { $i == $L_TimeOut } {
- set assert fail
- RecordAssertion $assert $GenericAssertionGuid \
- "SetData failed.(event hasn't been signaled before TIMEOUT)." \
- "TIMEOUT value is $L_TimeOut (sec), "
- SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
- Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
- GetAck
- BS->CloseEvent {@R_DoneEvent,&@R_Status}
- GetAck
- EndScope _IP6CONFIG_GETDATA_CONF5
- EndLog
- return
- }
- incr i
- Stall 1
- }
-} else {
- set assert fail
- RecordAssertion $assert $GenericAssertionGuid \
- "Ip6Config.SetData - Call SetData to set manual policy." \
- "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
-
- SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
- Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
- GetAck
- BS->CloseEvent {@R_DoneEvent,&@R_Status}
- GetAck
- EndScope _IP6CONFIG_GETDATA_CONF5
- EndLog
- return
-}
-
-Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_Status"
-GetAck
-set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
-RecordAssertion $assert $GenericAssertionGuid \
- "Ip6Config.GetData - Call GetData to get policy value." \
- "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
-GetVar R_Ip6ConfigPolicy
-if { $R_Ip6ConfigPolicy == $IP6CP(Manual) } {
- set assert pass
-} else {
- set assert fail
-
- RecordAssertion $assert $GenericAssertionGuid \
- "Set manual policy succeeds(event is signaled correctly and data correct)."
- SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
- Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
- GetAck
- BS->CloseEvent {@R_DoneEvent,&@R_Status}
- GetAck
- EndScope _IP6CONFIG_GETDATA_CONF5
- EndLog
- return
-}
-RecordAssertion $assert $GenericAssertionGuid \
- "Set manual policy succeeds(event is signaled correctly and data correct)."
-#
-# Check Point: Call Ip6Config->SetData to set DadXmits 20
-#
-SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
-SetVar R_Ip6ConfigDataSize [Sizeof EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS]
-SetVar R_Ip6ConfigDadTransmits.DupAddrDetectTransmits 20
-
-SetVar R_Context1 0
-BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context1,\
- &@R_DoneEvent1, &@R_Status"
-GetAck
-set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
-RecordAssertion $assert $GenericAssertionGuid \
- "BS.CreateEvent." \
- "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
-
-Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
-GetAck
-set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
-RecordAssertion $assert $GenericAssertionGuid \
- "Ip6Config.RegisterDataNotify - Register notification event for configuration." \
- "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
-
-Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigDadTransmits,&@R_Status"
-GetAck
-GetVar R_Status
-if { $R_Status == $EFI_SUCCESS } {
- set assert pass
- RecordAssertion $assert $GenericAssertionGuid \
- "Ip6Config.SetData - Call SetData to set DadXmits 10." \
- "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
-} elseif { $R_Status == $EFI_NOT_READY } {
- set i 0
- set L_TimeOut 30
- while { 1 > 0 } {
- GetVar R_Context1
- if { $R_Context1 == 1 } {
- break
- } elseif { $i == $L_TimeOut } {
- set assert fail
- RecordAssertion $assert $GenericAssertionGuid \
- "SetData failed.(event hasn't been signaled before TIMEOUT)." \
- "TIMEOUT value is $L_TimeOut (sec), "
-
- SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
- Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
- GetAck
- BS->CloseEvent {@R_DoneEvent,&@R_Status}
- GetAck
- SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
- Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
- GetAck
- BS->CloseEvent {@R_DoneEvent1,&@R_Status}
- GetAck
- EndScope _IP6CONFIG_GETDATA_CONF5
- EndLog
- return
- }
- incr i
- Stall 1
- }
-} else {
- set assert fail
- RecordAssertion $assert $GenericAssertionGuid \
- "Ip6Config.SetData - Call SetData to set DadXmits 10." \
- "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
-
- SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
- Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
- GetAck
- BS->CloseEvent {@R_DoneEvent,&@R_Status}
- GetAck
- SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
- Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
- GetAck
- BS->CloseEvent {@R_DoneEvent1,&@R_Status}
- GetAck
- EndScope _IP6CONFIG_GETDATA_CONF5
- EndLog
- return
-}
-
-Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigDadTransmits,&@R_Status"
-GetAck
-set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
-RecordAssertion $assert $GenericAssertionGuid \
- "Ip6Config.GetData - Call GetData to get DadXmits value." \
- "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
-GetVar R_Ip6ConfigDadTransmits.DupAddrDetectTransmits
-if { ${R_Ip6ConfigDadTransmits.DupAddrDetectTransmits} == 20 } {
- set assert pass
-} else {
- set assert fail
-
- RecordAssertion $assert $GenericAssertionGuid \
- "Set DadXmits succeeds(event is signaled correctly and data correct)."
- SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
- Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
- GetAck
- BS->CloseEvent {@R_DoneEvent,&@R_Status}
- GetAck
- SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
- Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
- GetAck
- BS->CloseEvent {@R_DoneEvent1,&@R_Status}
- GetAck
- EndScope _IP6CONFIG_GETDATA_CONF5
- EndLog
- return
-}
-RecordAssertion $assert $GenericAssertionGuid \
- "Set DadXmits succeeds(event is signaled correctly and data correct)."
-
-#
-# Check Point : Set Manual Address with valid parameter
-#
-EFI_IP6_CONFIG_MANUAL_ADDRESS R_Temp_Ip6ConfigManualAddress
-
-set L_ManualListLen 1
-EFI_IP6_CONFIG_MANUAL_ADDRESS R_Ip6ConfigManualAddress
-set L_UnitLen [Sizeof EFI_IP6_CONFIG_MANUAL_ADDRESS]
-set L_ListLen [expr {$L_UnitLen * $L_ManualListLen}]
-SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
-SetVar R_Ip6ConfigDataSize $L_ListLen
-SetVar R_Temp_Ip6ConfigManualAddress.IsAnycast FALSE
-SetVar R_Temp_Ip6ConfigManualAddress.PrefixLength 64
-SetIpv6Address R_Temp_Ip6ConfigManualAddress.Address "2002::5000"
-SetVar R_Ip6ConfigManualAddress @R_Temp_Ip6ConfigManualAddress
-
-Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigManualAddress,&@R_Status"
-GetAck
-GetVar R_Status
-if { $R_Status == $EFI_NOT_READY } {
- set assert pass
-} else {
- set assert fail
-
- RecordAssertion $assert $GenericAssertionGuid \
- "Ip6Config.SetData - Call SetData to set manual address with valid parameter." \
- "ReturnStatus - $R_Status, ExpectedStatus - $EFI_NOT_READY"
- SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
- Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
- GetAck
- BS->CloseEvent {@R_DoneEvent,&@R_Status}
- GetAck
- SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
- Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
- GetAck
- BS->CloseEvent {@R_DoneEvent1,&@R_Status}
- GetAck
- EndScope _IP6CONFIG_GETDATA_CONF5
- EndLog
- return
-}
-RecordAssertion $assert $GenericAssertionGuid \
- "Ip6Config.SetData - Call SetData to set manual address with valid parameter." \
- "ReturnStatus - $R_Status, ExpectedStatus - $EFI_NOT_READY"
-
-#
-# Check Point : Get Manual Address with valid parameter before the former setting finishes
-#
-set L_ManualListLen 1
-set L_UnitLen [Sizeof EFI_IP6_CONFIG_MANUAL_ADDRESS]
-set L_ListLen [expr {$L_UnitLen * $L_ManualListLen}]
-SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
-SetVar R_Ip6ConfigDataSize $L_ListLen
-
-Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigManualAddress,&@R_Status"
-GetAck
-set assert [VerifyReturnStatus R_Status $EFI_NOT_READY]
-RecordAssertion $assert $Ip6ConfigGetDataConf5AssertionGuid001 \
- "Ip6Config.SetData - Call GetData to get manual address before the former setting finishes." \
- "ReturnStatus - $R_Status, ExpectedStatus - $EFI_NOT_READY"
-
-#
-# Make sure the former configurations succeeds
-# (Eliminate the side-effect to other cases)
-#
-set i 0
-set L_TimeOut 30
-Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigManualAddress,&@R_Status"
-GetAck
-GetVar R_Status
-set assert pass
-while { $R_Status == $EFI_NOT_READY } {
- Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigManualAddress,&@R_Status"
- GetAck
- GetVar R_Status
- if { $R_Status == $EFI_SUCCESS } {
- break
- } elseif { $i == $L_TimeOut } {
- set assert fail
-
- RecordAssertion $assert $GenericAssertionGuid \
- "Ip6Config.SetData - former SetData finishes." \
- "TimeUsed - $i, TimeOut Value- $L_TimeOut"
- SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
- Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
- GetAck
- BS->CloseEvent {@R_DoneEvent,&@R_Status}
- GetAck
- SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
- Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
- GetAck
- BS->CloseEvent {@R_DoneEvent1,&@R_Status}
- GetAck
- EndScope _IP6CONFIG_GETDATA_CONF5
- EndLog
- return
- }
- incr i
- Stall 1
-}
-RecordAssertion $assert $GenericAssertionGuid \
- "Ip6Config.SetData - former SetData finishes." \
- "TimeUsed - $i, TimeOut Value- $L_TimeOut"
-
-
-#
-# Set automatic policy (this will clean up all address information configured)
-#
-SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
-SetVar R_Ip6ConfigDataSize [Sizeof UINT32]
-SetVar R_Ip6ConfigPolicy $IP6CP(Automatic)
-
-SetVar R_Context 0
-
-Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_Status"
-GetAck
-GetVar R_Status
-if { $R_Status == $EFI_SUCCESS } {
- set assert pass
-} elseif { $R_Status == $EFI_NOT_READY } {
- set i 0
- set L_TimeOut 30
- set assert pass
- while { 1 > 0 } {
- GetVar R_Context
- if { $R_Context == 1 } {
- break
- } elseif { $i == $L_TimeOut } {
- set assert fail
-
- SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
- Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
- GetAck
- BS->CloseEvent {@R_DoneEvent,&@R_Status}
- GetAck
- SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
- Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
- GetAck
- BS->CloseEvent {@R_DoneEvent1,&@R_Status}
- GetAck
-
- EndScope _IP6CONFIG_GETDATA_CONF5
- EndLog
- return
- }
- incr i
- Stall 1
- }
-} else {
- set assert fail
-
- SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
- Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
- GetAck
- BS->CloseEvent {@R_DoneEvent,&@R_Status}
- GetAck
- SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
- Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
- GetAck
- BS->CloseEvent {@R_DoneEvent1,&@R_Status}
- GetAck
-
- EndScope _IP6CONFIG_GETDATA_CONF5
- EndLog
- return
-}
-
-Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_Status"
-GetAck
-GetVar R_Ip6ConfigPolicy
-if { $R_Ip6ConfigPolicy == $IP6CP(Automatic) } {
- set assert pass
-} else {
- set assert fail
-
- RecordAssertion $assert $GenericAssertionGuid \
- "Ip6Config.SetData - Set automatic policy to clean up the former configuration." \
- "TimeUsed - $i, TimeOut Value- $L_TimeOut"
-
- SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
- Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
- GetAck
- BS->CloseEvent {@R_DoneEvent,&@R_Status}
- GetAck
- SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
- Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
- GetAck
- BS->CloseEvent {@R_DoneEvent1,&@R_Status}
- GetAck
-
- EndScope _IP6CONFIG_GETDATA_CONF5
- EndLog
- return
-}
-RecordAssertion $assert $GenericAssertionGuid \
- "Ip6Config.SetData - Set automatic policy to clean up the former configuration." \
- "TimeUsed - $i, TimeOut Value- $L_TimeOut"
-
-#
-# Clean up
-#
-SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
-Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
-GetAck
-set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
-RecordAssertion $assert $GenericAssertionGuid \
- "Ip6Config.UnregisterDataNotify - Unregister notification event for configuration." \
- "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
-
-BS->CloseEvent {@R_DoneEvent,&@R_Status}
-GetAck
-
-SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
-Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
-GetAck
-set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
-RecordAssertion $assert $GenericAssertionGuid \
- "Ip6Config.UnregisterDataNotify - Unregister notification event for configuration." \
- "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
-
-BS->CloseEvent {@R_DoneEvent1,&@R_Status}
-GetAck
-
-EndScope _IP6CONFIG_GETDATA_CONF5
-
+#
+# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
+# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
+#
+# This program and the accompanying materials
+# are licensed and made available under the terms and conditions of the BSD License
+# which accompanies this distribution. The full text of the license may be found at
+# http://opensource.org/licenses/bsd-license.php
+#
+# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+#
+################################################################################
+CaseLevel CONFORMANCE
+CaseAttribute AUTO
+CaseVerboseLevel DEFAULT
+set reportfile report.csv
+
+#
+# test case Name, category, description, GUID...
+#
+CaseGuid 6638523D-470B-4c50-AE75-DE0CE6854DE8
+CaseName GetData.Conf5.Case1
+CaseCategory IP6Config
+CaseDescription {GetData must not succeed when the last asynchronous process for the data type has not been finished yet.}
+
+################################################################################
+Include IP6Config/Include/Ip6Config.inc.tcl
+
+
+#
+# Begin log ...
+#
+BeginLog
+
+#
+# BeginScope
+#
+BeginScope _IP6CONFIG_GETDATA_CONF5
+
+#
+# Parameter Definition
+# R_ represents "Remote EFI Side Parameter"
+# L_ represents "Local ENTS Side Parameter"
+#
+UINTN R_Status
+UINTN R_Context
+UINTN R_DoneEvent
+UINTN R_Context1
+UINTN R_DoneEvent1
+UINTN R_Ip6ConfigDataSize
+UINT32 R_Ip6ConfigDataType
+EFI_IP6_CONFIG_INTERFACE_INFO R_Ip6ConfigInterfaceInfo
+EFI_IP6_CONFIG_INTERFACE_ID R_Ip6ConfigInterfaceId
+UINT32 R_Ip6ConfigPolicy
+EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS R_Ip6ConfigDadTransmits
+
+#
+# Check Point: Call Ip6Config->SetData to set manual policy
+#
+SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
+SetVar R_Ip6ConfigDataSize [Sizeof UINT32]
+SetVar R_Ip6ConfigPolicy $IP6CP(Manual)
+
+SetVar R_Context 0
+BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context,\
+ &@R_DoneEvent, &@R_Status"
+GetAck
+set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
+RecordAssertion $assert $GenericAssertionGuid \
+ "BS.CreateEvent." \
+ "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
+
+Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
+GetAck
+set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
+RecordAssertion $assert $GenericAssertionGuid \
+ "Ip6Config.RegisterDataNotify - Register notification event for configuration." \
+ "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
+
+Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_Status"
+GetAck
+GetVar R_Status
+if { $R_Status == $EFI_SUCCESS } {
+ set assert pass
+ RecordAssertion $assert $GenericAssertionGuid \
+ "Ip6Config.SetData - Call SetData to set manual policy." \
+ "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
+} elseif { $R_Status == $EFI_NOT_READY } {
+ set i 0
+ set L_TimeOut 30
+ while { 1 > 0 } {
+ GetVar R_Context
+ if { $R_Context == 1 } {
+ break
+ } elseif { $i == $L_TimeOut } {
+ set assert fail
+ RecordAssertion $assert $GenericAssertionGuid \
+ "SetData failed.(event hasn't been signaled before TIMEOUT)." \
+ "TIMEOUT value is $L_TimeOut (sec), "
+ SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
+ Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
+ GetAck
+ BS->CloseEvent {@R_DoneEvent,&@R_Status}
+ GetAck
+ EndScope _IP6CONFIG_GETDATA_CONF5
+ EndLog
+ return
+ }
+ incr i
+ Stall 1
+ }
+} else {
+ set assert fail
+ RecordAssertion $assert $GenericAssertionGuid \
+ "Ip6Config.SetData - Call SetData to set manual policy." \
+ "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
+
+ SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
+ Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
+ GetAck
+ BS->CloseEvent {@R_DoneEvent,&@R_Status}
+ GetAck
+ EndScope _IP6CONFIG_GETDATA_CONF5
+ EndLog
+ return
+}
+
+Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_Status"
+GetAck
+set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
+RecordAssertion $assert $GenericAssertionGuid \
+ "Ip6Config.GetData - Call GetData to get policy value." \
+ "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
+GetVar R_Ip6ConfigPolicy
+if { $R_Ip6ConfigPolicy == $IP6CP(Manual) } {
+ set assert pass
+} else {
+ set assert fail
+
+ RecordAssertion $assert $GenericAssertionGuid \
+ "Set manual policy succeeds(event is signaled correctly and data correct)."
+ SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
+ Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
+ GetAck
+ BS->CloseEvent {@R_DoneEvent,&@R_Status}
+ GetAck
+ EndScope _IP6CONFIG_GETDATA_CONF5
+ EndLog
+ return
+}
+RecordAssertion $assert $GenericAssertionGuid \
+ "Set manual policy succeeds(event is signaled correctly and data correct)."
+#
+# Check Point: Call Ip6Config->SetData to set DadXmits 20
+#
+SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
+SetVar R_Ip6ConfigDataSize [Sizeof EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS]
+SetVar R_Ip6ConfigDadTransmits.DupAddrDetectTransmits 20
+
+SetVar R_Context1 0
+BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context1,\
+ &@R_DoneEvent1, &@R_Status"
+GetAck
+set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
+RecordAssertion $assert $GenericAssertionGuid \
+ "BS.CreateEvent." \
+ "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
+
+Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
+GetAck
+set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
+RecordAssertion $assert $GenericAssertionGuid \
+ "Ip6Config.RegisterDataNotify - Register notification event for configuration." \
+ "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
+
+Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigDadTransmits,&@R_Status"
+GetAck
+GetVar R_Status
+if { $R_Status == $EFI_SUCCESS } {
+ set assert pass
+ RecordAssertion $assert $GenericAssertionGuid \
+ "Ip6Config.SetData - Call SetData to set DadXmits 10." \
+ "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
+} elseif { $R_Status == $EFI_NOT_READY } {
+ set i 0
+ set L_TimeOut 30
+ while { 1 > 0 } {
+ GetVar R_Context1
+ if { $R_Context1 == 1 } {
+ break
+ } elseif { $i == $L_TimeOut } {
+ set assert fail
+ RecordAssertion $assert $GenericAssertionGuid \
+ "SetData failed.(event hasn't been signaled before TIMEOUT)." \
+ "TIMEOUT value is $L_TimeOut (sec), "
+
+ SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
+ Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
+ GetAck
+ BS->CloseEvent {@R_DoneEvent,&@R_Status}
+ GetAck
+ SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
+ Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
+ GetAck
+ BS->CloseEvent {@R_DoneEvent1,&@R_Status}
+ GetAck
+ EndScope _IP6CONFIG_GETDATA_CONF5
+ EndLog
+ return
+ }
+ incr i
+ Stall 1
+ }
+} else {
+ set assert fail
+ RecordAssertion $assert $GenericAssertionGuid \
+ "Ip6Config.SetData - Call SetData to set DadXmits 10." \
+ "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
+
+ SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
+ Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
+ GetAck
+ BS->CloseEvent {@R_DoneEvent,&@R_Status}
+ GetAck
+ SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
+ Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
+ GetAck
+ BS->CloseEvent {@R_DoneEvent1,&@R_Status}
+ GetAck
+ EndScope _IP6CONFIG_GETDATA_CONF5
+ EndLog
+ return
+}
+
+Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigDadTransmits,&@R_Status"
+GetAck
+set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
+RecordAssertion $assert $GenericAssertionGuid \
+ "Ip6Config.GetData - Call GetData to get DadXmits value." \
+ "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
+GetVar R_Ip6ConfigDadTransmits.DupAddrDetectTransmits
+if { ${R_Ip6ConfigDadTransmits.DupAddrDetectTransmits} == 20 } {
+ set assert pass
+} else {
+ set assert fail
+
+ RecordAssertion $assert $GenericAssertionGuid \
+ "Set DadXmits succeeds(event is signaled correctly and data correct)."
+ SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
+ Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
+ GetAck
+ BS->CloseEvent {@R_DoneEvent,&@R_Status}
+ GetAck
+ SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
+ Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
+ GetAck
+ BS->CloseEvent {@R_DoneEvent1,&@R_Status}
+ GetAck
+ EndScope _IP6CONFIG_GETDATA_CONF5
+ EndLog
+ return
+}
+RecordAssertion $assert $GenericAssertionGuid \
+ "Set DadXmits succeeds(event is signaled correctly and data correct)."
+
+#
+# Check Point : Set Manual Address with valid parameter
+#
+EFI_IP6_CONFIG_MANUAL_ADDRESS R_Temp_Ip6ConfigManualAddress
+
+set L_ManualListLen 1
+EFI_IP6_CONFIG_MANUAL_ADDRESS R_Ip6ConfigManualAddress
+set L_UnitLen [Sizeof EFI_IP6_CONFIG_MANUAL_ADDRESS]
+set L_ListLen [expr {$L_UnitLen * $L_ManualListLen}]
+SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
+SetVar R_Ip6ConfigDataSize $L_ListLen
+SetVar R_Temp_Ip6ConfigManualAddress.IsAnycast FALSE
+SetVar R_Temp_Ip6ConfigManualAddress.PrefixLength 64
+SetIpv6Address R_Temp_Ip6ConfigManualAddress.Address "2002::5000"
+SetVar R_Ip6ConfigManualAddress @R_Temp_Ip6ConfigManualAddress
+
+Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigManualAddress,&@R_Status"
+GetAck
+GetVar R_Status
+if { $R_Status == $EFI_NOT_READY } {
+ set assert pass
+} else {
+ set assert fail
+
+ RecordAssertion $assert $GenericAssertionGuid \
+ "Ip6Config.SetData - Call SetData to set manual address with valid parameter." \
+ "ReturnStatus - $R_Status, ExpectedStatus - $EFI_NOT_READY"
+ SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
+ Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
+ GetAck
+ BS->CloseEvent {@R_DoneEvent,&@R_Status}
+ GetAck
+ SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
+ Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
+ GetAck
+ BS->CloseEvent {@R_DoneEvent1,&@R_Status}
+ GetAck
+ EndScope _IP6CONFIG_GETDATA_CONF5
+ EndLog
+ return
+}
+RecordAssertion $assert $GenericAssertionGuid \
+ "Ip6Config.SetData - Call SetData to set manual address with valid parameter." \
+ "ReturnStatus - $R_Status, ExpectedStatus - $EFI_NOT_READY"
+
+#
+# Check Point : Get Manual Address with valid parameter before the former setting finishes
+#
+set L_ManualListLen 1
+set L_UnitLen [Sizeof EFI_IP6_CONFIG_MANUAL_ADDRESS]
+set L_ListLen [expr {$L_UnitLen * $L_ManualListLen}]
+SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
+SetVar R_Ip6ConfigDataSize $L_ListLen
+
+Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigManualAddress,&@R_Status"
+GetAck
+set assert [VerifyReturnStatus R_Status $EFI_NOT_READY]
+RecordAssertion $assert $Ip6ConfigGetDataConf5AssertionGuid001 \
+ "Ip6Config.SetData - Call GetData to get manual address before the former setting finishes." \
+ "ReturnStatus - $R_Status, ExpectedStatus - $EFI_NOT_READY"
+
+#
+# Make sure the former configurations succeeds
+# (Eliminate the side-effect to other cases)
+#
+set i 0
+set L_TimeOut 30
+Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigManualAddress,&@R_Status"
+GetAck
+GetVar R_Status
+set assert pass
+while { $R_Status == $EFI_NOT_READY } {
+ Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigManualAddress,&@R_Status"
+ GetAck
+ GetVar R_Status
+ if { $R_Status == $EFI_SUCCESS } {
+ break
+ } elseif { $i == $L_TimeOut } {
+ set assert fail
+
+ RecordAssertion $assert $GenericAssertionGuid \
+ "Ip6Config.SetData - former SetData finishes." \
+ "TimeUsed - $i, TimeOut Value- $L_TimeOut"
+ SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
+ Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
+ GetAck
+ BS->CloseEvent {@R_DoneEvent,&@R_Status}
+ GetAck
+ SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
+ Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
+ GetAck
+ BS->CloseEvent {@R_DoneEvent1,&@R_Status}
+ GetAck
+ EndScope _IP6CONFIG_GETDATA_CONF5
+ EndLog
+ return
+ }
+ incr i
+ Stall 1
+}
+RecordAssertion $assert $GenericAssertionGuid \
+ "Ip6Config.SetData - former SetData finishes." \
+ "TimeUsed - $i, TimeOut Value- $L_TimeOut"
+
+
+#
+# Set automatic policy (this will clean up all address information configured)
+#
+SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
+SetVar R_Ip6ConfigDataSize [Sizeof UINT32]
+SetVar R_Ip6ConfigPolicy $IP6CP(Automatic)
+
+SetVar R_Context 0
+
+Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_Status"
+GetAck
+GetVar R_Status
+if { $R_Status == $EFI_SUCCESS } {
+ set assert pass
+} elseif { $R_Status == $EFI_NOT_READY } {
+ set i 0
+ set L_TimeOut 30
+ set assert pass
+ while { 1 > 0 } {
+ GetVar R_Context
+ if { $R_Context == 1 } {
+ break
+ } elseif { $i == $L_TimeOut } {
+ set assert fail
+
+ SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
+ Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
+ GetAck
+ BS->CloseEvent {@R_DoneEvent,&@R_Status}
+ GetAck
+ SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
+ Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
+ GetAck
+ BS->CloseEvent {@R_DoneEvent1,&@R_Status}
+ GetAck
+
+ EndScope _IP6CONFIG_GETDATA_CONF5
+ EndLog
+ return
+ }
+ incr i
+ Stall 1
+ }
+} else {
+ set assert fail
+
+ SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
+ Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
+ GetAck
+ BS->CloseEvent {@R_DoneEvent,&@R_Status}
+ GetAck
+ SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
+ Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
+ GetAck
+ BS->CloseEvent {@R_DoneEvent1,&@R_Status}
+ GetAck
+
+ EndScope _IP6CONFIG_GETDATA_CONF5
+ EndLog
+ return
+}
+
+Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_Status"
+GetAck
+GetVar R_Ip6ConfigPolicy
+if { $R_Ip6ConfigPolicy == $IP6CP(Automatic) } {
+ set assert pass
+} else {
+ set assert fail
+
+ RecordAssertion $assert $GenericAssertionGuid \
+ "Ip6Config.SetData - Set automatic policy to clean up the former configuration." \
+ "TimeUsed - $i, TimeOut Value- $L_TimeOut"
+
+ SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
+ Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
+ GetAck
+ BS->CloseEvent {@R_DoneEvent,&@R_Status}
+ GetAck
+ SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
+ Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
+ GetAck
+ BS->CloseEvent {@R_DoneEvent1,&@R_Status}
+ GetAck
+
+ EndScope _IP6CONFIG_GETDATA_CONF5
+ EndLog
+ return
+}
+RecordAssertion $assert $GenericAssertionGuid \
+ "Ip6Config.SetData - Set automatic policy to clean up the former configuration." \
+ "TimeUsed - $i, TimeOut Value- $L_TimeOut"
+
+#
+# Clean up
+#
+SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
+Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
+GetAck
+set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
+RecordAssertion $assert $GenericAssertionGuid \
+ "Ip6Config.UnregisterDataNotify - Unregister notification event for configuration." \
+ "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
+
+BS->CloseEvent {@R_DoneEvent,&@R_Status}
+GetAck
+
+SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
+Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
+GetAck
+set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
+RecordAssertion $assert $GenericAssertionGuid \
+ "Ip6Config.UnregisterDataNotify - Unregister notification event for configuration." \
+ "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
+
+BS->CloseEvent {@R_DoneEvent1,&@R_Status}
+GetAck
+
+EndScope _IP6CONFIG_GETDATA_CONF5
+
EndLog
\ No newline at end of file
diff --git a/uefi-sct/EMS/Bin/TestCase/IP6Config/GetData.Func1.Case1.tcl b/uefi-sct/EMS/Bin/TestCase/IP6Config/GetData.Func1.Case1.tcl
index 6c4a72b..a0acc20 100644
--- a/uefi-sct/EMS/Bin/TestCase/IP6Config/GetData.Func1.Case1.tcl
+++ b/uefi-sct/EMS/Bin/TestCase/IP6Config/GetData.Func1.Case1.tcl
@@ -1,272 +1,272 @@
-#
-# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
-# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
-#
-# This program and the accompanying materials
-# are licensed and made available under the terms and conditions of the BSD License
-# which accompanies this distribution. The full text of the license may be found at
-# http://opensource.org/licenses/bsd-license.php
-#
-# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
-# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-#
-################################################################################
-CaseLevel FUNCTION
-CaseAttribute AUTO
-CaseVerboseLevel DEFAULT
-set reportfile report.csv
-
-#
-# test case Name, category, description, GUID...
-#
-CaseGuid E4CD5B45-9CF5-4938-A243-7764F1E8CDE9
-CaseName GetData.Func1.Case1
-CaseCategory IP6Config
-CaseDescription {GetData must succeed with valid parameters.}
-
-################################################################################
-Include IP6Config/Include/Ip6Config.inc.tcl
-
-
-#
-# Begin log ...
-#
-BeginLog
-
-#
-# BeginScope
-#
-BeginScope _IP6CONFIG_GETDATA_FUNC1
-
-#
-# Parameter Definition
-# R_ represents "Remote EFI Side Parameter"
-# L_ represents "Local ENTS Side Parameter"
-#
-UINTN R_Status
-UINTN R_Context
-UINTN R_Context1
-UINTN R_DoneEvent
-UINTN R_DoneEvent1
-UINTN R_Ip6ConfigDataSize
-UINT32 R_Ip6ConfigDataType
-EFI_IP6_CONFIG_INTERFACE_INFO R_Ip6ConfigInterfaceInfo
-EFI_IP6_CONFIG_INTERFACE_ID R_Ip6ConfigInterfaceId
-UINT32 R_Ip6ConfigPolicy
-EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS R_Ip6ConfigDadTransmits
-
-#
-# Check Point: Call Ip6Config->GetData to set AltInterfaceId
-#
-SetVar R_Ip6ConfigDataType $IP6CDT(AltInterfaceId)
-SetVar R_Ip6ConfigDataSize [Sizeof EFI_IP6_CONFIG_INTERFACE_ID]
-SetVar R_Ip6ConfigInterfaceId.Id(0) 0
-SetVar R_Ip6ConfigInterfaceId.Id(1) 1
-SetVar R_Ip6ConfigInterfaceId.Id(2) 2
-SetVar R_Ip6ConfigInterfaceId.Id(3) 3
-SetVar R_Ip6ConfigInterfaceId.Id(4) 4
-SetVar R_Ip6ConfigInterfaceId.Id(5) 5
-SetVar R_Ip6ConfigInterfaceId.Id(6) 6
-SetVar R_Ip6ConfigInterfaceId.Id(7) 7
-
-SetVar R_Context 0
-BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context,\
- &@R_DoneEvent, &@R_Status"
-GetAck
-set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
-RecordAssertion $assert $GenericAssertionGuid \
- "BS.CreateEvent." \
- "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
-
-Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
-GetAck
-set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
-RecordAssertion $assert $GenericAssertionGuid \
- "Ip6Config.RegisterDataNotify - Register notification event for configuration." \
- "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
-
-Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigInterfaceId,&@R_Status"
-GetAck
-GetVar R_Status
-if { $R_Status == $EFI_SUCCESS } {
- set assert pass
- RecordAssertion $assert $GenericAssertionGuid \
- "Ip6Config.GetData - Call GetData to set AltInterfaceId." \
- "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
-} elseif { $R_Status == $EFI_NOT_READY } {
- set i 0
- set L_TimeOut 30
- while { 1 > 0 } {
- GetVar R_Context
- if { $R_Context == 1 } {
- break
- } elseif { $i == $L_TimeOut } {
- set assert fail
- RecordAssertion $assert $GenericAssertionGuid \
- "GetData failed.(event hasn't been signaled before TIMEOUT)." \
- "TIMEOUT value is $L_TimeOut (sec), "
- SetVar R_Ip6ConfigDataType $IP6CDT(AltInterfaceId)
- Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
- GetAck
- BS->CloseEvent {@R_DoneEvent,&@R_Status}
- GetAck
- EndScope _IP6CONFIG_GETDATA_FUNC1
- EndLog
- return
- }
- incr i
- Stall 1
- }
-} else {
- set assert fail
- RecordAssertion $assert $GenericAssertionGuid \
- "Ip6Config.GetData - Call GetData to set AltInterfaceId." \
- "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
-
- SetVar R_Ip6ConfigDataType $IP6CDT(AltInterfaceId)
- Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
- GetAck
- BS->CloseEvent {@R_DoneEvent,&@R_Status}
- GetAck
- EndScope _IP6CONFIG_GETDATA_FUNC1
- EndLog
- return
-}
-
-Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigInterfaceId,&@R_Status"
-GetAck
-set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
-RecordAssertion $assert $Ip6ConfigGetDataFunc1AssertionGuid001 \
- "Ip6Config.GetData - Call GetData to get AltInterfaceId value." \
- "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
-GetVar R_Ip6ConfigInterfaceId
-if { ${R_Ip6ConfigInterfaceId.Id(0)} == 0 && ${R_Ip6ConfigInterfaceId.Id(1)} == 1 && ${R_Ip6ConfigInterfaceId.Id(2)} == 2 && ${R_Ip6ConfigInterfaceId.Id(3)} == 3 && ${R_Ip6ConfigInterfaceId.Id(4)} == 4 && ${R_Ip6ConfigInterfaceId.Id(5)} == 5 && ${R_Ip6ConfigInterfaceId.Id(6)} == 6 && ${R_Ip6ConfigInterfaceId.Id(7)} == 7} {
- set assert pass
-} else {
- set assert fail
-}
-RecordAssertion $assert $Ip6ConfigGetDataFunc1AssertionGuid002 \
- "Set AltInterfaceId succeeds(event is signaled correctly and data correct)."
-
-#
-# Check Point: Call Ip6Config->SetData to set DadXmits
-#
-SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
-SetVar R_Ip6ConfigDataSize [Sizeof EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS]
-SetVar R_Ip6ConfigDadTransmits.DupAddrDetectTransmits 3
-
-SetVar R_Context1 0
-BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context1,\
- &@R_DoneEvent1, &@R_Status"
-GetAck
-set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
-RecordAssertion $assert $GenericAssertionGuid \
- "BS.CreateEvent." \
- "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
-
-Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
-GetAck
-set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
-RecordAssertion $assert $GenericAssertionGuid \
- "Ip6Config.RegisterDataNotify - Register notification event for configuration." \
- "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
-
-Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigDadTransmits,&@R_Status"
-GetAck
-GetVar R_Status
-if { $R_Status == $EFI_SUCCESS } {
- set assert pass
- RecordAssertion $assert $GenericAssertionGuid \
- "Ip6Config.GetData - Call GetData to set DadXmits." \
- "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
-} elseif { $R_Status == $EFI_NOT_READY } {
- set i 0
- set L_TimeOut 30
- while { 1 > 0 } {
- GetVar R_Context1
- if { $R_Context1 == 1 } {
- break
- } elseif { $i == $L_TimeOut } {
- set assert fail
- RecordAssertion $assert $GenericAssertionGuid \
- "GetData failed.(event hasn't been signaled before TIMEOUT)." \
- "TIMEOUT value is $L_TimeOut (sec), "
- SetVar R_Ip6ConfigDataType $IP6CDT(AltInterfaceId)
- Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
- GetAck
- BS->CloseEvent {@R_DoneEvent,&@R_Status}
- GetAck
- SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
- Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
- GetAck
- BS->CloseEvent {@R_DoneEvent1,&@R_Status}
- GetAck
- EndScope _IP6CONFIG_GETDATA_FUNC1
- EndLog
- return
- }
- incr i
- Stall 1
- }
-} else {
- set assert fail
- RecordAssertion $assert $GenericAssertionGuid \
- "Ip6Config.GetData - Call GetData to set manual DadXmits." \
- "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
-
- SetVar R_Ip6ConfigDataType $IP6CDT(AltInterfaceId)
- Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
- GetAck
- BS->CloseEvent {@R_DoneEvent,&@R_Status}
- GetAck
- SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
- Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
- GetAck
- BS->CloseEvent {@R_DoneEvent1,&@R_Status}
- GetAck
- EndScope _IP6CONFIG_GETDATA_FUNC1
- EndLog
- return
-}
-
-Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigDadTransmits,&@R_Status"
-GetAck
-set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
-RecordAssertion $assert $Ip6ConfigGetDataFunc1AssertionGuid003 \
- "Ip6Config.GetData - Call GetData to get DadXmits value." \
- "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
-GetVar R_Ip6ConfigDadTransmits
-if { ${R_Ip6ConfigDadTransmits.DupAddrDetectTransmits} == 3 } {
- set assert pass
-} else {
- set assert fail
-}
-RecordAssertion $assert $Ip6ConfigGetDataFunc1AssertionGuid004 \
- "Set DadXmits succeeds(event is signaled correctly and data correct)."
-
-#
-# Clean up
-#
-SetVar R_Ip6ConfigDataType $IP6CDT(AltInterfaceId)
-Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
-GetAck
-set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
-RecordAssertion $assert $GenericAssertionGuid \
- "Ip6Config.UnregisterDataNotify - Unregister notification event for configuration." \
- "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
-BS->CloseEvent {@R_DoneEvent,&@R_Status}
-GetAck
-
-SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
-Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
-GetAck
-set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
-RecordAssertion $assert $GenericAssertionGuid \
- "Ip6Config.UnregisterDataNotify - Unregister notification event for configuration." \
- "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
-BS->CloseEvent {@R_DoneEvent1,&@R_Status}
-GetAck
-
-EndScope _IP6CONFIG_GETDATA_FUNC1
-
+#
+# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
+# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
+#
+# This program and the accompanying materials
+# are licensed and made available under the terms and conditions of the BSD License
+# which accompanies this distribution. The full text of the license may be found at
+# http://opensource.org/licenses/bsd-license.php
+#
+# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+#
+################################################################################
+CaseLevel FUNCTION
+CaseAttribute AUTO
+CaseVerboseLevel DEFAULT
+set reportfile report.csv
+
+#
+# test case Name, category, description, GUID...
+#
+CaseGuid E4CD5B45-9CF5-4938-A243-7764F1E8CDE9
+CaseName GetData.Func1.Case1
+CaseCategory IP6Config
+CaseDescription {GetData must succeed with valid parameters.}
+
+################################################################################
+Include IP6Config/Include/Ip6Config.inc.tcl
+
+
+#
+# Begin log ...
+#
+BeginLog
+
+#
+# BeginScope
+#
+BeginScope _IP6CONFIG_GETDATA_FUNC1
+
+#
+# Parameter Definition
+# R_ represents "Remote EFI Side Parameter"
+# L_ represents "Local ENTS Side Parameter"
+#
+UINTN R_Status
+UINTN R_Context
+UINTN R_Context1
+UINTN R_DoneEvent
+UINTN R_DoneEvent1
+UINTN R_Ip6ConfigDataSize
+UINT32 R_Ip6ConfigDataType
+EFI_IP6_CONFIG_INTERFACE_INFO R_Ip6ConfigInterfaceInfo
+EFI_IP6_CONFIG_INTERFACE_ID R_Ip6ConfigInterfaceId
+UINT32 R_Ip6ConfigPolicy
+EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS R_Ip6ConfigDadTransmits
+
+#
+# Check Point: Call Ip6Config->GetData to set AltInterfaceId
+#
+SetVar R_Ip6ConfigDataType $IP6CDT(AltInterfaceId)
+SetVar R_Ip6ConfigDataSize [Sizeof EFI_IP6_CONFIG_INTERFACE_ID]
+SetVar R_Ip6ConfigInterfaceId.Id(0) 0
+SetVar R_Ip6ConfigInterfaceId.Id(1) 1
+SetVar R_Ip6ConfigInterfaceId.Id(2) 2
+SetVar R_Ip6ConfigInterfaceId.Id(3) 3
+SetVar R_Ip6ConfigInterfaceId.Id(4) 4
+SetVar R_Ip6ConfigInterfaceId.Id(5) 5
+SetVar R_Ip6ConfigInterfaceId.Id(6) 6
+SetVar R_Ip6ConfigInterfaceId.Id(7) 7
+
+SetVar R_Context 0
+BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context,\
+ &@R_DoneEvent, &@R_Status"
+GetAck
+set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
+RecordAssertion $assert $GenericAssertionGuid \
+ "BS.CreateEvent." \
+ "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
+
+Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
+GetAck
+set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
+RecordAssertion $assert $GenericAssertionGuid \
+ "Ip6Config.RegisterDataNotify - Register notification event for configuration." \
+ "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
+
+Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigInterfaceId,&@R_Status"
+GetAck
+GetVar R_Status
+if { $R_Status == $EFI_SUCCESS } {
+ set assert pass
+ RecordAssertion $assert $GenericAssertionGuid \
+ "Ip6Config.GetData - Call GetData to set AltInterfaceId." \
+ "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
+} elseif { $R_Status == $EFI_NOT_READY } {
+ set i 0
+ set L_TimeOut 30
+ while { 1 > 0 } {
+ GetVar R_Context
+ if { $R_Context == 1 } {
+ break
+ } elseif { $i == $L_TimeOut } {
+ set assert fail
+ RecordAssertion $assert $GenericAssertionGuid \
+ "GetData failed.(event hasn't been signaled before TIMEOUT)." \
+ "TIMEOUT value is $L_TimeOut (sec), "
+ SetVar R_Ip6ConfigDataType $IP6CDT(AltInterfaceId)
+ Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
+ GetAck
+ BS->CloseEvent {@R_DoneEvent,&@R_Status}
+ GetAck
+ EndScope _IP6CONFIG_GETDATA_FUNC1
+ EndLog
+ return
+ }
+ incr i
+ Stall 1
+ }
+} else {
+ set assert fail
+ RecordAssertion $assert $GenericAssertionGuid \
+ "Ip6Config.GetData - Call GetData to set AltInterfaceId." \
+ "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
+
+ SetVar R_Ip6ConfigDataType $IP6CDT(AltInterfaceId)
+ Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
+ GetAck
+ BS->CloseEvent {@R_DoneEvent,&@R_Status}
+ GetAck
+ EndScope _IP6CONFIG_GETDATA_FUNC1
+ EndLog
+ return
+}
+
+Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigInterfaceId,&@R_Status"
+GetAck
+set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
+RecordAssertion $assert $Ip6ConfigGetDataFunc1AssertionGuid001 \
+ "Ip6Config.GetData - Call GetData to get AltInterfaceId value." \
+ "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
+GetVar R_Ip6ConfigInterfaceId
+if { ${R_Ip6ConfigInterfaceId.Id(0)} == 0 && ${R_Ip6ConfigInterfaceId.Id(1)} == 1 && ${R_Ip6ConfigInterfaceId.Id(2)} == 2 && ${R_Ip6ConfigInterfaceId.Id(3)} == 3 && ${R_Ip6ConfigInterfaceId.Id(4)} == 4 && ${R_Ip6ConfigInterfaceId.Id(5)} == 5 && ${R_Ip6ConfigInterfaceId.Id(6)} == 6 && ${R_Ip6ConfigInterfaceId.Id(7)} == 7} {
+ set assert pass
+} else {
+ set assert fail
+}
+RecordAssertion $assert $Ip6ConfigGetDataFunc1AssertionGuid002 \
+ "Set AltInterfaceId succeeds(event is signaled correctly and data correct)."
+
+#
+# Check Point: Call Ip6Config->SetData to set DadXmits
+#
+SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
+SetVar R_Ip6ConfigDataSize [Sizeof EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS]
+SetVar R_Ip6ConfigDadTransmits.DupAddrDetectTransmits 3
+
+SetVar R_Context1 0
+BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context1,\
+ &@R_DoneEvent1, &@R_Status"
+GetAck
+set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
+RecordAssertion $assert $GenericAssertionGuid \
+ "BS.CreateEvent." \
+ "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
+
+Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
+GetAck
+set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
+RecordAssertion $assert $GenericAssertionGuid \
+ "Ip6Config.RegisterDataNotify - Register notification event for configuration." \
+ "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
+
+Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigDadTransmits,&@R_Status"
+GetAck
+GetVar R_Status
+if { $R_Status == $EFI_SUCCESS } {
+ set assert pass
+ RecordAssertion $assert $GenericAssertionGuid \
+ "Ip6Config.GetData - Call GetData to set DadXmits." \
+ "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
+} elseif { $R_Status == $EFI_NOT_READY } {
+ set i 0
+ set L_TimeOut 30
+ while { 1 > 0 } {
+ GetVar R_Context1
+ if { $R_Context1 == 1 } {
+ break
+ } elseif { $i == $L_TimeOut } {
+ set assert fail
+ RecordAssertion $assert $GenericAssertionGuid \
+ "GetData failed.(event hasn't been signaled before TIMEOUT)." \
+ "TIMEOUT value is $L_TimeOut (sec), "
+ SetVar R_Ip6ConfigDataType $IP6CDT(AltInterfaceId)
+ Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
+ GetAck
+ BS->CloseEvent {@R_DoneEvent,&@R_Status}
+ GetAck
+ SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
+ Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
+ GetAck
+ BS->CloseEvent {@R_DoneEvent1,&@R_Status}
+ GetAck
+ EndScope _IP6CONFIG_GETDATA_FUNC1
+ EndLog
+ return
+ }
+ incr i
+ Stall 1
+ }
+} else {
+ set assert fail
+ RecordAssertion $assert $GenericAssertionGuid \
+ "Ip6Config.GetData - Call GetData to set manual DadXmits." \
+ "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
+
+ SetVar R_Ip6ConfigDataType $IP6CDT(AltInterfaceId)
+ Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
+ GetAck
+ BS->CloseEvent {@R_DoneEvent,&@R_Status}
+ GetAck
+ SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
+ Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
+ GetAck
+ BS->CloseEvent {@R_DoneEvent1,&@R_Status}
+ GetAck
+ EndScope _IP6CONFIG_GETDATA_FUNC1
+ EndLog
+ return
+}
+
+Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigDadTransmits,&@R_Status"
+GetAck
+set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
+RecordAssertion $assert $Ip6ConfigGetDataFunc1AssertionGuid003 \
+ "Ip6Config.GetData - Call GetData to get DadXmits value." \
+ "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
+GetVar R_Ip6ConfigDadTransmits
+if { ${R_Ip6ConfigDadTransmits.DupAddrDetectTransmits} == 3 } {
+ set assert pass
+} else {
+ set assert fail
+}
+RecordAssertion $assert $Ip6ConfigGetDataFunc1AssertionGuid004 \
+ "Set DadXmits succeeds(event is signaled correctly and data correct)."
+
+#
+# Clean up
+#
+SetVar R_Ip6ConfigDataType $IP6CDT(AltInterfaceId)
+Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
+GetAck
+set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
+RecordAssertion $assert $GenericAssertionGuid \
+ "Ip6Config.UnregisterDataNotify - Unregister notification event for configuration." \
+ "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
+BS->CloseEvent {@R_DoneEvent,&@R_Status}
+GetAck
+
+SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
+Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
+GetAck
+set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
+RecordAssertion $assert $GenericAssertionGuid \
+ "Ip6Config.UnregisterDataNotify - Unregister notification event for configuration." \
+ "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
+BS->CloseEvent {@R_DoneEvent1,&@R_Status}
+GetAck
+
+EndScope _IP6CONFIG_GETDATA_FUNC1
+
EndLog
\ No newline at end of file
diff --git a/uefi-sct/EMS/Bin/TestCase/IP6Config/Include/Ip6Config.inc.tcl b/uefi-sct/EMS/Bin/TestCase/IP6Config/Include/Ip6Config.inc.tcl
index 918038d..9e162e7 100644
--- a/uefi-sct/EMS/Bin/TestCase/IP6Config/Include/Ip6Config.inc.tcl
+++ b/uefi-sct/EMS/Bin/TestCase/IP6Config/Include/Ip6Config.inc.tcl
@@ -1,96 +1,96 @@
-#
-# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
-# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
-#
-# This program and the accompanying materials
-# are licensed and made available under the terms and conditions of the BSD License
-# which accompanies this distribution. The full text of the license may be found at
-# http://opensource.org/licenses/bsd-license.php
-#
-# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
-# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-#
-if {[info exist IP6CONFIG_INC] == 1} {
- return
-}
-set IP6CONFIG_INC 1
-
-Include Include/EntsProtocolTest.inc.tcl
-Include Include/EntsConfigure.tcl
-Include Include/EfiBootService.inc.tcl
-Include Include/EfiGenericService.inc.tcl
-Include EfiUtil/EfiInclude.tcl
-
-Include IP6/Include/Ip6.inc.tcl
-Include IP6Config/Include/Ip6ConfigDefine.tcl
-Include IP6Config/Include/Ip6Config.proc.tcl
-Include IP6Config/Include/Ip6ConfigAssertionGuid.tcl
-Include Include/GenericAssertionGuid.tcl
-
-###################################################################
-# Function Declaration
-###################################################################
-Func Ip6Config->SetData {
- UINT32
- UINTN
- POINTER
- POINTER
-}
-
-Func Ip6Config->GetData {
- UINT32
- POINTER
- POINTER
- POINTER
-}
-
-Func Ip6Config->RegisterDataNotify {
- UINT32
- UINTN
- POINTER
-}
-
-Func Ip6Config->UnregisterDataNotify {
- UINT32
- UINTN
- POINTER
-}
-
-
-###################################################################
-# EFI_IP6_CONFIG_INTERFACE_INFO
-###################################################################
-Struct EFI_IP6_CONFIG_INTERFACE_INFO {
- CHAR16 Name(32);
- UINT8 IfType;
- UINT32 HwAddressSize;
- EFI_MAC_ADDRESS HwAddress;
- UINT32 AddressInfoCount;
- POINTER AddressInfo;
- UINT32 RouteCount;
- POINTER RouteTable;
-}
-
-###################################################################
-# EFI_IP6_CONFIG_INTERFACE_ID
-###################################################################
-Struct EFI_IP6_CONFIG_INTERFACE_ID {
- UINT8 Id(8);
-}
-
-###################################################################
-# EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS
-###################################################################
-Struct EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS {
- UINT32 DupAddrDetectTransmits;
-}
-
-###################################################################
-# EFI_IP6_CONFIG_MANUAL_ADDRESS
-###################################################################
-Struct EFI_IP6_CONFIG_MANUAL_ADDRESS {
- EFI_IPv6_ADDRESS Address;
- BOOLEAN IsAnycast;
- UINT8 PrefixLength;
-}
-
+#
+# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
+# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
+#
+# This program and the accompanying materials
+# are licensed and made available under the terms and conditions of the BSD License
+# which accompanies this distribution. The full text of the license may be found at
+# http://opensource.org/licenses/bsd-license.php
+#
+# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+#
+if {[info exist IP6CONFIG_INC] == 1} {
+ return
+}
+set IP6CONFIG_INC 1
+
+Include Include/EntsProtocolTest.inc.tcl
+Include Include/EntsConfigure.tcl
+Include Include/EfiBootService.inc.tcl
+Include Include/EfiGenericService.inc.tcl
+Include EfiUtil/EfiInclude.tcl
+
+Include IP6/Include/Ip6.inc.tcl
+Include IP6Config/Include/Ip6ConfigDefine.tcl
+Include IP6Config/Include/Ip6Config.proc.tcl
+Include IP6Config/Include/Ip6ConfigAssertionGuid.tcl
+Include Include/GenericAssertionGuid.tcl
+
+###################################################################
+# Function Declaration
+###################################################################
+Func Ip6Config->SetData {
+ UINT32
+ UINTN
+ POINTER
+ POINTER
+}
+
+Func Ip6Config->GetData {
+ UINT32
+ POINTER
+ POINTER
+ POINTER
+}
+
+Func Ip6Config->RegisterDataNotify {
+ UINT32
+ UINTN
+ POINTER
+}
+
+Func Ip6Config->UnregisterDataNotify {
+ UINT32
+ UINTN
+ POINTER
+}
+
+
+###################################################################
+# EFI_IP6_CONFIG_INTERFACE_INFO
+###################################################################
+Struct EFI_IP6_CONFIG_INTERFACE_INFO {
+ CHAR16 Name(32);
+ UINT8 IfType;
+ UINT32 HwAddressSize;
+ EFI_MAC_ADDRESS HwAddress;
+ UINT32 AddressInfoCount;
+ POINTER AddressInfo;
+ UINT32 RouteCount;
+ POINTER RouteTable;
+}
+
+###################################################################
+# EFI_IP6_CONFIG_INTERFACE_ID
+###################################################################
+Struct EFI_IP6_CONFIG_INTERFACE_ID {
+ UINT8 Id(8);
+}
+
+###################################################################
+# EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS
+###################################################################
+Struct EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS {
+ UINT32 DupAddrDetectTransmits;
+}
+
+###################################################################
+# EFI_IP6_CONFIG_MANUAL_ADDRESS
+###################################################################
+Struct EFI_IP6_CONFIG_MANUAL_ADDRESS {
+ EFI_IPv6_ADDRESS Address;
+ BOOLEAN IsAnycast;
+ UINT8 PrefixLength;
+}
+
diff --git a/uefi-sct/EMS/Bin/TestCase/IP6Config/Include/Ip6Config.proc.tcl b/uefi-sct/EMS/Bin/TestCase/IP6Config/Include/Ip6Config.proc.tcl
index de40066..f2a2dda 100644
--- a/uefi-sct/EMS/Bin/TestCase/IP6Config/Include/Ip6Config.proc.tcl
+++ b/uefi-sct/EMS/Bin/TestCase/IP6Config/Include/Ip6Config.proc.tcl
@@ -1,16 +1,16 @@
-#
-# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
-# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
-#
-# This program and the accompanying materials
-# are licensed and made available under the terms and conditions of the BSD License
-# which accompanies this distribution. The full text of the license may be found at
-# http://opensource.org/licenses/bsd-license.php
-#
-# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
-# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-#
-if {[info exist IP6CONFIG_PROC] == 1} {
- return
-}
+#
+# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
+# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
+#
+# This program and the accompanying materials
+# are licensed and made available under the terms and conditions of the BSD License
+# which accompanies this distribution. The full text of the license may be found at
+# http://opensource.org/licenses/bsd-license.php
+#
+# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+#
+if {[info exist IP6CONFIG_PROC] == 1} {
+ return
+}
set IP6CONFIG_PROC 1
\ No newline at end of file
diff --git a/uefi-sct/EMS/Bin/TestCase/IP6Config/Include/Ip6ConfigAssertionGuid.tcl b/uefi-sct/EMS/Bin/TestCase/IP6Config/Include/Ip6ConfigAssertionGuid.tcl
index 9356240..da69bf9 100644
--- a/uefi-sct/EMS/Bin/TestCase/IP6Config/Include/Ip6ConfigAssertionGuid.tcl
+++ b/uefi-sct/EMS/Bin/TestCase/IP6Config/Include/Ip6ConfigAssertionGuid.tcl
@@ -1,84 +1,96 @@
-#
-# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
-# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
-#
-# This program and the accompanying materials
-# are licensed and made available under the terms and conditions of the BSD License
-# which accompanies this distribution. The full text of the license may be found at
-# http://opensource.org/licenses/bsd-license.php
-#
-# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
-# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-#
-#
-# Guid for SetData() interface
-#
-set Ip6ConfigSetDataConf1AssertionGuid001 7A224CCE-B79B-472a-9B8C-A47E074D5EEF
-set Ip6ConfigSetDataConf2AssertionGuid001 46F12872-61F2-46e4-A2F9-5F685B419479
-set Ip6ConfigSetDataConf2AssertionGuid002 1CAC93D3-732A-4e30-894D-EE63B6F486A0
-set Ip6ConfigSetDataConf2AssertionGuid003 D005EBF3-CFD6-498a-9005-C2B3702EB4FC
-set Ip6ConfigSetDataConf2AssertionGuid004 389806D5-4506-4319-8D17-9B4FC9D97E25
-set Ip6ConfigSetDataConf2AssertionGuid005 5AEFDB0C-322F-49c3-9DD2-DFE21B66B308
-set Ip6ConfigSetDataConf2AssertionGuid006 D339988F-2595-4fb5-81AE-A94DC470B234
-set Ip6ConfigSetDataConf3AssertionGuid001 4319A43B-7641-47c0-84BB-985C479902A2
-set Ip6ConfigSetDataConf4AssertionGuid001 01F3B344-EB52-4086-B949-55D7E4DC5BDE
-set Ip6ConfigSetDataConf4AssertionGuid002 F612AF26-2519-497c-B205-37A2914AEE05
-set Ip6ConfigSetDataConf4AssertionGuid003 592C1F3D-249E-4654-B4B1-600421624DD1
-set Ip6ConfigSetDataConf5AssertionGuid001 D70BEC29-8026-4e1b-BA8B-36A313B45859
-set Ip6ConfigSetDataConf5AssertionGuid002 FE793490-53F8-4991-8348-E624530E83E9
-set Ip6ConfigSetDataConf5AssertionGuid003 42CCB2EF-D706-4d1a-B247-F42BBA99F707
-set Ip6ConfigSetDataConf5AssertionGuid004 9168CB20-C891-42da-BB9F-7ADBE488B012
-set Ip6ConfigSetDataConf5AssertionGuid005 AD058D87-1015-4b2d-A351-5BD4B0930B7B
-set Ip6ConfigSetDataConf5AssertionGuid006 388BE3F6-D63E-4cbf-A3D9-3D941823259B
-set Ip6ConfigSetDataConf6AssertionGuid001 2886BAE1-383A-400f-8F88-66376B2A0FF5
-set Ip6ConfigSetDataConf7AssertionGuid001 D2C61F06-8822-4a09-89A1-7F0667FCAF0E
-set Ip6ConfigSetDataFunc1AssertionGuid001 0A5902DA-4142-4494-AC66-2B731FFEA671
-set Ip6ConfigSetDataFunc1AssertionGuid002 D9A9EF5E-D819-49d0-BB12-25ADEC52DDB3
-set Ip6ConfigSetDataFunc1AssertionGuid003 14E96019-0815-4486-916C-E440E166628E
-set Ip6ConfigSetDataFunc1AssertionGuid004 3458BBE0-0D7E-48ec-B380-2A885F44E104
-
-
-#
-# Guid for GetData() interface
-#
-set Ip6ConfigGetDataConf1AssertionGuid001 D15E421D-6228-4fea-8D5A-330FFF3F80D2
-set Ip6ConfigGetDataConf2AssertionGuid001 38B36C04-12E9-4e96-B24F-C453851E6C1D
-set Ip6ConfigGetDataConf3AssertionGuid001 D05A6C59-617F-4549-9659-4E0CFC3C3336
-set Ip6ConfigGetDataConf3AssertionGuid002 ED45C2FE-9EC1-4553-AFA4-771E9D4F7611
-set Ip6ConfigGetDataConf4AssertionGuid001 59118C46-2F2A-4029-ABD6-767418920369
-set Ip6ConfigGetDataConf5AssertionGuid001 55955D09-C806-4777-9FF0-95C00E79AC28
-set Ip6ConfigGetDataFunc1AssertionGuid001 FEAAC1A0-95BD-4dcb-91C3-9F08504BEFA1
-set Ip6ConfigGetDataFunc1AssertionGuid002 3649D729-D6D0-456e-84AE-C7E7B8464343
-set Ip6ConfigGetDataFunc1AssertionGuid003 165E79B4-C987-4100-8AA2-8AB115B07FAD
-set Ip6ConfigGetDataFunc1AssertionGuid004 DB420311-17F7-40cf-A0B1-0294D5DCCC92
-
-#
-# Guid for RegisterDataNotify() interface
-#
-set Ip6ConfigRegisterDataNotifyConf1AssertionGuid001 7E3F6157-EC75-4ecd-A79B-4926F3AA1C0D
-set Ip6ConfigRegisterDataNotifyConf2AssertionGuid001 70DC8C71-C54D-4446-8AD9-BAC086E43D17
-set Ip6ConfigRegisterDataNotifyConf3AssertionGuid001 2D88F18B-0BEF-4616-BDE5-CA4E0086E1D3
-set Ip6ConfigRegisterDataNotifyFunc1AssertionGuid001 9A98DC85-D018-45aa-B851-34EE2F6716D4
-set Ip6ConfigRegisterDataNotifyFunc1AssertionGuid002 39F7FB37-9F9F-485e-8DBC-0F3191DA9909
-set Ip6ConfigRegisterDataNotifyFunc1AssertionGuid003 D13DA599-37E7-474a-9343-83C9EFE80893
-set Ip6ConfigRegisterDataNotifyFunc1AssertionGuid004 5428BDD5-4332-4e3b-841F-3E60540AA35D
-set Ip6ConfigRegisterDataNotifyFunc1AssertionGuid005 1844A7C8-730C-4927-8E02-CE0A6CA08DCC
-set Ip6ConfigRegisterDataNotifyFunc1AssertionGuid006 B0E66591-9076-48e3-8DF6-2A1D59A572DB
-
-
-#
-# Guid for UnregisterDataNotify() interface
-#
-set Ip6ConfigUnregisterDataNotifyConf1AssertionGuid001 8AB0E5A2-A4E1-4282-87B5-E377C763AD2F
-set Ip6ConfigUnregisterDataNotifyConf2AssertionGuid001 5C68228F-AAAE-4d0b-9927-7664476EF360
-set Ip6ConfigUnregisterDataNotifyConf2AssertionGuid002 55D8193E-F58E-4800-924B-73C902098DD8
-set Ip6ConfigUnregisterDataNotifyFunc1AssertionGuid001 42EB4628-8DF6-4704-81E5-F7EAE6CBB270
-set Ip6ConfigUnregisterDataNotifyFunc1AssertionGuid002 174CEC07-E573-434b-8E99-77F8AE9C55B5
-set Ip6ConfigUnregisterDataNotifyFunc1AssertionGuid003 1F5EF1AF-8A19-48d6-831F-51BE00B32AA5
-set Ip6ConfigUnregisterDataNotifyFunc1AssertionGuid004 388C8838-7790-4a1f-9DB7-5017D7AA60DB
-
-
-
-
-
-
+#
+# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
+# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
+#
+# This program and the accompanying materials
+# are licensed and made available under the terms and conditions of the BSD License
+# which accompanies this distribution. The full text of the license may be found at
+# http://opensource.org/licenses/bsd-license.php
+#
+# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+#
+#
+# Guid for SetData() interface
+#
+set Ip6ConfigSetDataConf1AssertionGuid001 7A224CCE-B79B-472a-9B8C-A47E074D5EEF
+set Ip6ConfigSetDataConf2AssertionGuid001 46F12872-61F2-46e4-A2F9-5F685B419479
+set Ip6ConfigSetDataConf2AssertionGuid002 1CAC93D3-732A-4e30-894D-EE63B6F486A0
+set Ip6ConfigSetDataConf2AssertionGuid003 D005EBF3-CFD6-498a-9005-C2B3702EB4FC
+set Ip6ConfigSetDataConf2AssertionGuid004 389806D5-4506-4319-8D17-9B4FC9D97E25
+set Ip6ConfigSetDataConf2AssertionGuid005 5AEFDB0C-322F-49c3-9DD2-DFE21B66B308
+set Ip6ConfigSetDataConf2AssertionGuid006 D339988F-2595-4fb5-81AE-A94DC470B234
+set Ip6ConfigSetDataConf3AssertionGuid001 4319A43B-7641-47c0-84BB-985C479902A2
+set Ip6ConfigSetDataConf4AssertionGuid001 01F3B344-EB52-4086-B949-55D7E4DC5BDE
+set Ip6ConfigSetDataConf4AssertionGuid002 F612AF26-2519-497c-B205-37A2914AEE05
+set Ip6ConfigSetDataConf4AssertionGuid003 592C1F3D-249E-4654-B4B1-600421624DD1
+set Ip6ConfigSetDataConf5AssertionGuid001 D70BEC29-8026-4e1b-BA8B-36A313B45859
+set Ip6ConfigSetDataConf5AssertionGuid002 FE793490-53F8-4991-8348-E624530E83E9
+set Ip6ConfigSetDataConf5AssertionGuid003 42CCB2EF-D706-4d1a-B247-F42BBA99F707
+set Ip6ConfigSetDataConf5AssertionGuid004 9168CB20-C891-42da-BB9F-7ADBE488B012
+set Ip6ConfigSetDataConf5AssertionGuid005 AD058D87-1015-4b2d-A351-5BD4B0930B7B
+set Ip6ConfigSetDataConf5AssertionGuid006 388BE3F6-D63E-4cbf-A3D9-3D941823259B
+set Ip6ConfigSetDataConf6AssertionGuid001 2886BAE1-383A-400f-8F88-66376B2A0FF5
+set Ip6ConfigSetDataConf7AssertionGuid001 D2C61F06-8822-4a09-89A1-7F0667FCAF0E
+set Ip6ConfigSetDataFunc1AssertionGuid001 0A5902DA-4142-4494-AC66-2B731FFEA671
+set Ip6ConfigSetDataFunc1AssertionGuid002 D9A9EF5E-D819-49d0-BB12-25ADEC52DDB3
+set Ip6ConfigSetDataFunc1AssertionGuid003 14E96019-0815-4486-916C-E440E166628E
+set Ip6ConfigSetDataFunc1AssertionGuid004 3458BBE0-0D7E-48ec-B380-2A885F44E104
+
+set Ip6ConfigSetDataFunc2AssertionGuid001 B533A7CF-6C27-421A-A816-B075E7EA4573
+set Ip6ConfigSetDataFunc2AssertionGuid002 C816C0EE-52C0-400E-A9CC-25C263E27B04
+set Ip6ConfigSetDataFunc2AssertionGuid003 2CF2435A-C444-4E09-BC8A-56A6F33CED9C
+set Ip6ConfigSetDataFunc2AssertionGuid004 3B673875-4CE8-4F23-8FE1-E440376604FD
+set Ip6ConfigSetDataFunc2AssertionGuid005 05B7BF41-9CE9-481B-B9A4-2E83AD5E89E3
+set Ip6ConfigSetDataFunc2AssertionGuid006 4D49A668-A44D-4D69-9F20-40B7F147988E
+set Ip6ConfigSetDataFunc2AssertionGuid007 23000969-DFDE-4B04-AD44-0844D595AA66
+set Ip6ConfigSetDataFunc2AssertionGuid008 E444B75C-B559-48C4-8D15-8F882AC7F81E
+set Ip6ConfigSetDataFunc2AssertionGuid009 AC649D07-2063-4045-9DAE-29B4E38E46BB
+set Ip6ConfigSetDataFunc2AssertionGuid010 4EDBB740-405F-4E6D-A4A5-D77122D16278
+set Ip6ConfigSetDataFunc2AssertionGuid011 D131A6D9-CCAB-4460-8402-80ED252FEB09
+set Ip6ConfigSetDataFunc2AssertionGuid012 A5D75088-D8D3-47DD-A623-F6098DF70546
+
+#
+# Guid for GetData() interface
+#
+set Ip6ConfigGetDataConf1AssertionGuid001 D15E421D-6228-4fea-8D5A-330FFF3F80D2
+set Ip6ConfigGetDataConf2AssertionGuid001 38B36C04-12E9-4e96-B24F-C453851E6C1D
+set Ip6ConfigGetDataConf3AssertionGuid001 D05A6C59-617F-4549-9659-4E0CFC3C3336
+set Ip6ConfigGetDataConf3AssertionGuid002 ED45C2FE-9EC1-4553-AFA4-771E9D4F7611
+set Ip6ConfigGetDataConf4AssertionGuid001 59118C46-2F2A-4029-ABD6-767418920369
+set Ip6ConfigGetDataConf5AssertionGuid001 55955D09-C806-4777-9FF0-95C00E79AC28
+set Ip6ConfigGetDataFunc1AssertionGuid001 FEAAC1A0-95BD-4dcb-91C3-9F08504BEFA1
+set Ip6ConfigGetDataFunc1AssertionGuid002 3649D729-D6D0-456e-84AE-C7E7B8464343
+set Ip6ConfigGetDataFunc1AssertionGuid003 165E79B4-C987-4100-8AA2-8AB115B07FAD
+set Ip6ConfigGetDataFunc1AssertionGuid004 DB420311-17F7-40cf-A0B1-0294D5DCCC92
+
+#
+# Guid for RegisterDataNotify() interface
+#
+set Ip6ConfigRegisterDataNotifyConf1AssertionGuid001 7E3F6157-EC75-4ecd-A79B-4926F3AA1C0D
+set Ip6ConfigRegisterDataNotifyConf2AssertionGuid001 70DC8C71-C54D-4446-8AD9-BAC086E43D17
+set Ip6ConfigRegisterDataNotifyConf3AssertionGuid001 2D88F18B-0BEF-4616-BDE5-CA4E0086E1D3
+set Ip6ConfigRegisterDataNotifyFunc1AssertionGuid001 9A98DC85-D018-45aa-B851-34EE2F6716D4
+set Ip6ConfigRegisterDataNotifyFunc1AssertionGuid002 39F7FB37-9F9F-485e-8DBC-0F3191DA9909
+set Ip6ConfigRegisterDataNotifyFunc1AssertionGuid003 D13DA599-37E7-474a-9343-83C9EFE80893
+set Ip6ConfigRegisterDataNotifyFunc1AssertionGuid004 5428BDD5-4332-4e3b-841F-3E60540AA35D
+set Ip6ConfigRegisterDataNotifyFunc1AssertionGuid005 1844A7C8-730C-4927-8E02-CE0A6CA08DCC
+set Ip6ConfigRegisterDataNotifyFunc1AssertionGuid006 B0E66591-9076-48e3-8DF6-2A1D59A572DB
+
+
+#
+# Guid for UnregisterDataNotify() interface
+#
+set Ip6ConfigUnregisterDataNotifyConf1AssertionGuid001 8AB0E5A2-A4E1-4282-87B5-E377C763AD2F
+set Ip6ConfigUnregisterDataNotifyConf2AssertionGuid001 5C68228F-AAAE-4d0b-9927-7664476EF360
+set Ip6ConfigUnregisterDataNotifyConf2AssertionGuid002 55D8193E-F58E-4800-924B-73C902098DD8
+set Ip6ConfigUnregisterDataNotifyFunc1AssertionGuid001 42EB4628-8DF6-4704-81E5-F7EAE6CBB270
+set Ip6ConfigUnregisterDataNotifyFunc1AssertionGuid002 174CEC07-E573-434b-8E99-77F8AE9C55B5
+set Ip6ConfigUnregisterDataNotifyFunc1AssertionGuid003 1F5EF1AF-8A19-48d6-831F-51BE00B32AA5
+set Ip6ConfigUnregisterDataNotifyFunc1AssertionGuid004 388C8838-7790-4a1f-9DB7-5017D7AA60DB
+
+
+
+
+
+
diff --git a/uefi-sct/EMS/Bin/TestCase/IP6Config/Include/Ip6ConfigDefine.tcl b/uefi-sct/EMS/Bin/TestCase/IP6Config/Include/Ip6ConfigDefine.tcl
index 0d78321..1fcd579 100644
--- a/uefi-sct/EMS/Bin/TestCase/IP6Config/Include/Ip6ConfigDefine.tcl
+++ b/uefi-sct/EMS/Bin/TestCase/IP6Config/Include/Ip6ConfigDefine.tcl
@@ -1,51 +1,51 @@
-#
-# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
-# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
-#
-# This program and the accompanying materials
-# are licensed and made available under the terms and conditions of the BSD License
-# which accompanies this distribution. The full text of the license may be found at
-# http://opensource.org/licenses/bsd-license.php
-#
-# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
-# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-#
-if {[info exist IP6CONFIG_DEFINE] == 1} {
- return
-}
-set IP6CONFIG_DEFINE 1
-
-#
-# EUT/ENTS Connection Definition
-#
-#set DEF_EUT_IP_ADDR "2002:0000:0000:0000:0000:0000:0000:0001"
-#set DEF_EUT_MAC_ADDR [GetTargetMac]
-#set DEF_EUT_PRT 0
-
-#set DEF_ENTS_IP_ADDR "2002:0000:0000:0000:0000:0000:0000:4321"
-#set DEF_ENTS_MAC_ADDR [GetHostMac]
-#set DEF_ENTS_PRT 8888
-
-#
-# EFI_IP6_CONFIG_DATA_TYPE
-#
-set IP6CDT(InterfaceInfo) 0
-set IP6CDT(AltInterfaceId) 1
-set IP6CDT(Policy) 2
-set IP6CDT(DupAddrDetectTransmits) 3
-set IP6CDT(ManualAddress) 4
-set IP6CDT(Gateway) 5
-set IP6CDT(DnsServer) 6
-set IP6CDT(Maximum) 7
-
-#
-# EFI_IP6_CONFIG_POLICY
-#
-set IP6CP(Manual) 0
-set IP6CP(Automatic) 1
-
-#
-# Timers
-#
-set i 0
-set L_TimeOut 30
+#
+# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
+# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
+#
+# This program and the accompanying materials
+# are licensed and made available under the terms and conditions of the BSD License
+# which accompanies this distribution. The full text of the license may be found at
+# http://opensource.org/licenses/bsd-license.php
+#
+# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+#
+if {[info exist IP6CONFIG_DEFINE] == 1} {
+ return
+}
+set IP6CONFIG_DEFINE 1
+
+#
+# EUT/ENTS Connection Definition
+#
+#set DEF_EUT_IP_ADDR "2002:0000:0000:0000:0000:0000:0000:0001"
+#set DEF_EUT_MAC_ADDR [GetTargetMac]
+#set DEF_EUT_PRT 0
+
+#set DEF_ENTS_IP_ADDR "2002:0000:0000:0000:0000:0000:0000:4321"
+#set DEF_ENTS_MAC_ADDR [GetHostMac]
+#set DEF_ENTS_PRT 8888
+
+#
+# EFI_IP6_CONFIG_DATA_TYPE
+#
+set IP6CDT(InterfaceInfo) 0
+set IP6CDT(AltInterfaceId) 1
+set IP6CDT(Policy) 2
+set IP6CDT(DupAddrDetectTransmits) 3
+set IP6CDT(ManualAddress) 4
+set IP6CDT(Gateway) 5
+set IP6CDT(DnsServer) 6
+set IP6CDT(Maximum) 7
+
+#
+# EFI_IP6_CONFIG_POLICY
+#
+set IP6CP(Manual) 0
+set IP6CP(Automatic) 1
+
+#
+# Timers
+#
+set i 0
+set L_TimeOut 30
diff --git a/uefi-sct/EMS/Bin/TestCase/IP6Config/RegisterDataNotify.Conf1.Case1.tcl b/uefi-sct/EMS/Bin/TestCase/IP6Config/RegisterDataNotify.Conf1.Case1.tcl
index f8a97a1..aa60cb8 100644
--- a/uefi-sct/EMS/Bin/TestCase/IP6Config/RegisterDataNotify.Conf1.Case1.tcl
+++ b/uefi-sct/EMS/Bin/TestCase/IP6Config/RegisterDataNotify.Conf1.Case1.tcl
@@ -1,90 +1,90 @@
-#
-# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
-# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
-#
-# This program and the accompanying materials
-# are licensed and made available under the terms and conditions of the BSD License
-# which accompanies this distribution. The full text of the license may be found at
-# http://opensource.org/licenses/bsd-license.php
-#
-# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
-# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-#
-################################################################################
-CaseLevel CONFORMANCE
-CaseAttribute AUTO
-CaseVerboseLevel DEFAULT
-set reportfile report.csv
-
-#
-# test case Name, category, description, GUID...
-#
-CaseGuid F76B637C-BA5F-4451-8DF4-A13E1CCAB3A0
-CaseName RegisterDataNotify.Conf1.Case1
-CaseCategory IP6Config
-CaseDescription {RegisterDataNotify must not succeed when event is NULL.}
-
-################################################################################
-Include IP6Config/Include/Ip6Config.inc.tcl
-
-
-#
-# Begin log ...
-#
-BeginLog
-
-#
-# BeginScope
-#
-BeginScope _IP6CONFIG_REGISTERDATANOTIFY_CONF1
-
-#
-# Parameter Definition
-# R_ represents "Remote EFI Side Parameter"
-# L_ represents "Local ENTS Side Parameter"
-#
-UINTN R_Status
-UINTN R_Context
-UINTN R_DoneEvent
-UINTN R_Ip6ConfigDataSize
-UINT32 R_Ip6ConfigDataType
-EFI_IP6_CONFIG_INTERFACE_INFO R_Ip6ConfigInterfaceInfo
-EFI_IP6_CONFIG_INTERFACE_ID R_Ip6ConfigInterfaceId
-UINT32 R_Ip6ConfigPolicy
-EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS R_Ip6ConfigDadTransmits
-
-#
-# Check Point: Call Ip6Config->SetData to set manual policy
-#
-SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
-SetVar R_Ip6ConfigDataSize [Sizeof UINT32]
-SetVar R_Ip6ConfigPolicy $IP6CP(Manual)
-
-SetVar R_Context 0
-BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context,\
- &@R_DoneEvent, &@R_Status"
-GetAck
-set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
-RecordAssertion $assert $GenericAssertionGuid \
- "BS.CreateEvent." \
- "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
-
-#
-# Check Point: Call Ip6Config->RegisterDataNotify with event NULL
-#
-Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType, 0 ,&@R_Status"
-GetAck
-set assert [VerifyReturnStatus R_Status $EFI_INVALID_PARAMETER]
-RecordAssertion $assert $Ip6ConfigRegisterDataNotifyConf1AssertionGuid001 \
- "Ip6Config.RegisterDataNotify - Register notification event with the event NULL." \
- "ReturnStatus - $R_Status, ExpectedStatus - $EFI_INVALID_PARAMETER"
-
-#
-# Clean up
-#
-BS->CloseEvent {@R_DoneEvent,&@R_Status}
-GetAck
-
-EndScope _IP6CONFIG_REGISTERDATANOTIFY_CONF1
-
+#
+# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
+# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
+#
+# This program and the accompanying materials
+# are licensed and made available under the terms and conditions of the BSD License
+# which accompanies this distribution. The full text of the license may be found at
+# http://opensource.org/licenses/bsd-license.php
+#
+# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+#
+################################################################################
+CaseLevel CONFORMANCE
+CaseAttribute AUTO
+CaseVerboseLevel DEFAULT
+set reportfile report.csv
+
+#
+# test case Name, category, description, GUID...
+#
+CaseGuid F76B637C-BA5F-4451-8DF4-A13E1CCAB3A0
+CaseName RegisterDataNotify.Conf1.Case1
+CaseCategory IP6Config
+CaseDescription {RegisterDataNotify must not succeed when event is NULL.}
+
+################################################################################
+Include IP6Config/Include/Ip6Config.inc.tcl
+
+
+#
+# Begin log ...
+#
+BeginLog
+
+#
+# BeginScope
+#
+BeginScope _IP6CONFIG_REGISTERDATANOTIFY_CONF1
+
+#
+# Parameter Definition
+# R_ represents "Remote EFI Side Parameter"
+# L_ represents "Local ENTS Side Parameter"
+#
+UINTN R_Status
+UINTN R_Context
+UINTN R_DoneEvent
+UINTN R_Ip6ConfigDataSize
+UINT32 R_Ip6ConfigDataType
+EFI_IP6_CONFIG_INTERFACE_INFO R_Ip6ConfigInterfaceInfo
+EFI_IP6_CONFIG_INTERFACE_ID R_Ip6ConfigInterfaceId
+UINT32 R_Ip6ConfigPolicy
+EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS R_Ip6ConfigDadTransmits
+
+#
+# Check Point: Call Ip6Config->SetData to set manual policy
+#
+SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
+SetVar R_Ip6ConfigDataSize [Sizeof UINT32]
+SetVar R_Ip6ConfigPolicy $IP6CP(Manual)
+
+SetVar R_Context 0
+BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context,\
+ &@R_DoneEvent, &@R_Status"
+GetAck
+set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
+RecordAssertion $assert $GenericAssertionGuid \
+ "BS.CreateEvent." \
+ "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
+
+#
+# Check Point: Call Ip6Config->RegisterDataNotify with event NULL
+#
+Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType, 0 ,&@R_Status"
+GetAck
+set assert [VerifyReturnStatus R_Status $EFI_INVALID_PARAMETER]
+RecordAssertion $assert $Ip6ConfigRegisterDataNotifyConf1AssertionGuid001 \
+ "Ip6Config.RegisterDataNotify - Register notification event with the event NULL." \
+ "ReturnStatus - $R_Status, ExpectedStatus - $EFI_INVALID_PARAMETER"
+
+#
+# Clean up
+#
+BS->CloseEvent {@R_DoneEvent,&@R_Status}
+GetAck
+
+EndScope _IP6CONFIG_REGISTERDATANOTIFY_CONF1
+
EndLog
\ No newline at end of file
diff --git a/uefi-sct/EMS/Bin/TestCase/IP6Config/RegisterDataNotify.Conf2.Case1.tcl b/uefi-sct/EMS/Bin/TestCase/IP6Config/RegisterDataNotify.Conf2.Case1.tcl
index 3e72249..38b7431 100644
--- a/uefi-sct/EMS/Bin/TestCase/IP6Config/RegisterDataNotify.Conf2.Case1.tcl
+++ b/uefi-sct/EMS/Bin/TestCase/IP6Config/RegisterDataNotify.Conf2.Case1.tcl
@@ -1,90 +1,90 @@
-#
-# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
-# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
-#
-# This program and the accompanying materials
-# are licensed and made available under the terms and conditions of the BSD License
-# which accompanies this distribution. The full text of the license may be found at
-# http://opensource.org/licenses/bsd-license.php
-#
-# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
-# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-#
-################################################################################
-CaseLevel CONFORMANCE
-CaseAttribute AUTO
-CaseVerboseLevel DEFAULT
-set reportfile report.csv
-
-#
-# test case Name, category, description, GUID...
-#
-CaseGuid E5221141-97BC-4e5f-9ABA-304BB11EADA0
-CaseName RegisterDataNotify.Conf2.Case1
-CaseCategory IP6Config
-CaseDescription {RegisterDataNotify must not succeed when data type is not supported.}
-
-################################################################################
-Include IP6Config/Include/Ip6Config.inc.tcl
-
-
-#
-# Begin log ...
-#
-BeginLog
-
-#
-# BeginScope
-#
-BeginScope _IP6CONFIG_REGISTERDATANOTIFY_CONF2
-
-#
-# Parameter Definition
-# R_ represents "Remote EFI Side Parameter"
-# L_ represents "Local ENTS Side Parameter"
-#
-UINTN R_Status
-UINTN R_Context
-UINTN R_DoneEvent
-UINTN R_Ip6ConfigDataSize
-UINT32 R_Ip6ConfigDataType
-UINTN R_Ip6ConfigDataTypeMaximum
-EFI_IP6_CONFIG_INTERFACE_INFO R_Ip6ConfigInterfaceInfo
-EFI_IP6_CONFIG_INTERFACE_ID R_Ip6ConfigInterfaceId
-UINT32 R_Ip6ConfigPolicy
-EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS R_Ip6ConfigDadTransmits
-
-#
-# Check Point: Call Ip6Config->SetData to set manual policy
-#
-SetVar R_Ip6ConfigDataType $IP6CDT(Maximum)
-SetVar R_Ip6ConfigDataSize [Sizeof UINTN]
-
-SetVar R_Context 0
-BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context,\
- &@R_DoneEvent, &@R_Status"
-GetAck
-set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
-RecordAssertion $assert $GenericAssertionGuid \
- "BS.CreateEvent." \
- "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
-
-#
-# Check Point: Call Ip6Config->RegisterDataNotify with the datatype not supported
-#
-Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType, @R_DoneEvent ,&@R_Status"
-GetAck
-set assert [VerifyReturnStatus R_Status $EFI_UNSUPPORTED]
-RecordAssertion $assert $Ip6ConfigRegisterDataNotifyConf2AssertionGuid001 \
- "Ip6Config.RegisterDataNotify - Register notification event with the data type not supported." \
- "ReturnStatus - $R_Status, ExpectedStatus - $EFI_UNSUPPORTED"
-
-#
-# Clean up
-#
-BS->CloseEvent {@R_DoneEvent,&@R_Status}
-GetAck
-
-EndScope _IP6CONFIG_REGISTERDATANOTIFY_CONF2
-
+#
+# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
+# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
+#
+# This program and the accompanying materials
+# are licensed and made available under the terms and conditions of the BSD License
+# which accompanies this distribution. The full text of the license may be found at
+# http://opensource.org/licenses/bsd-license.php
+#
+# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+#
+################################################################################
+CaseLevel CONFORMANCE
+CaseAttribute AUTO
+CaseVerboseLevel DEFAULT
+set reportfile report.csv
+
+#
+# test case Name, category, description, GUID...
+#
+CaseGuid E5221141-97BC-4e5f-9ABA-304BB11EADA0
+CaseName RegisterDataNotify.Conf2.Case1
+CaseCategory IP6Config
+CaseDescription {RegisterDataNotify must not succeed when data type is not supported.}
+
+################################################################################
+Include IP6Config/Include/Ip6Config.inc.tcl
+
+
+#
+# Begin log ...
+#
+BeginLog
+
+#
+# BeginScope
+#
+BeginScope _IP6CONFIG_REGISTERDATANOTIFY_CONF2
+
+#
+# Parameter Definition
+# R_ represents "Remote EFI Side Parameter"
+# L_ represents "Local ENTS Side Parameter"
+#
+UINTN R_Status
+UINTN R_Context
+UINTN R_DoneEvent
+UINTN R_Ip6ConfigDataSize
+UINT32 R_Ip6ConfigDataType
+UINTN R_Ip6ConfigDataTypeMaximum
+EFI_IP6_CONFIG_INTERFACE_INFO R_Ip6ConfigInterfaceInfo
+EFI_IP6_CONFIG_INTERFACE_ID R_Ip6ConfigInterfaceId
+UINT32 R_Ip6ConfigPolicy
+EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS R_Ip6ConfigDadTransmits
+
+#
+# Check Point: Call Ip6Config->SetData to set manual policy
+#
+SetVar R_Ip6ConfigDataType $IP6CDT(Maximum)
+SetVar R_Ip6ConfigDataSize [Sizeof UINTN]
+
+SetVar R_Context 0
+BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context,\
+ &@R_DoneEvent, &@R_Status"
+GetAck
+set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
+RecordAssertion $assert $GenericAssertionGuid \
+ "BS.CreateEvent." \
+ "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
+
+#
+# Check Point: Call Ip6Config->RegisterDataNotify with the datatype not supported
+#
+Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType, @R_DoneEvent ,&@R_Status"
+GetAck
+set assert [VerifyReturnStatus R_Status $EFI_UNSUPPORTED]
+RecordAssertion $assert $Ip6ConfigRegisterDataNotifyConf2AssertionGuid001 \
+ "Ip6Config.RegisterDataNotify - Register notification event with the data type not supported." \
+ "ReturnStatus - $R_Status, ExpectedStatus - $EFI_UNSUPPORTED"
+
+#
+# Clean up
+#
+BS->CloseEvent {@R_DoneEvent,&@R_Status}
+GetAck
+
+EndScope _IP6CONFIG_REGISTERDATANOTIFY_CONF2
+
EndLog
\ No newline at end of file
diff --git a/uefi-sct/EMS/Bin/TestCase/IP6Config/RegisterDataNotify.Conf3.Case1.tcl b/uefi-sct/EMS/Bin/TestCase/IP6Config/RegisterDataNotify.Conf3.Case1.tcl
index 8c8363c..77d9ef5 100644
--- a/uefi-sct/EMS/Bin/TestCase/IP6Config/RegisterDataNotify.Conf3.Case1.tcl
+++ b/uefi-sct/EMS/Bin/TestCase/IP6Config/RegisterDataNotify.Conf3.Case1.tcl
@@ -1,109 +1,109 @@
-#
-# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
-# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
-#
-# This program and the accompanying materials
-# are licensed and made available under the terms and conditions of the BSD License
-# which accompanies this distribution. The full text of the license may be found at
-# http://opensource.org/licenses/bsd-license.php
-#
-# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
-# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-#
-################################################################################
-CaseLevel CONFORMANCE
-CaseAttribute AUTO
-CaseVerboseLevel DEFAULT
-set reportfile report.csv
-
-#
-# test case Name, category, description, GUID...
-#
-CaseGuid B00EBD2E-F23E-434e-80E8-2A17C3BCFDFE
-CaseName RegisterDataNotify.Conf3.Case1
-CaseCategory IP6Config
-CaseDescription {RegisterDataNotify must not succeed when event has already registered.}
-
-################################################################################
-Include IP6Config/Include/Ip6Config.inc.tcl
-
-
-#
-# Begin log ...
-#
-BeginLog
-
-#
-# BeginScope
-#
-BeginScope _IP6CONFIG_REGISTERDATANOTIFY_CONF3
-
-#
-# Parameter Definition
-# R_ represents "Remote EFI Side Parameter"
-# L_ represents "Local ENTS Side Parameter"
-#
-UINTN R_Status
-UINTN R_Context
-UINTN R_DoneEvent
-UINTN R_Ip6ConfigDataSize
-UINT32 R_Ip6ConfigDataType
-EFI_IP6_CONFIG_INTERFACE_INFO R_Ip6ConfigInterfaceInfo
-EFI_IP6_CONFIG_INTERFACE_ID R_Ip6ConfigInterfaceId
-UINT32 R_Ip6ConfigPolicy
-EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS R_Ip6ConfigDadTransmits
-
-#
-# Check Point: Call Ip6Config->SetData to set manual policy
-#
-SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
-SetVar R_Ip6ConfigDataSize [Sizeof UINT32]
-SetVar R_Ip6ConfigPolicy $IP6CP(Manual)
-
-SetVar R_Context 0
-BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context,\
- &@R_DoneEvent, &@R_Status"
-GetAck
-set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
-RecordAssertion $assert $GenericAssertionGuid \
- "BS.CreateEvent." \
- "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
-
-#
-# Check Point: Call Ip6Config->RegisterDataNotify with valid parameters
-#
-Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType, @R_DoneEvent ,&@R_Status"
-GetAck
-set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
-RecordAssertion $assert $GenericAssertionGuid \
- "Ip6Config.RegisterDataNotify - Register notification event with valid parameters." \
- "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
-
-#
-# Check Point : Call RegisterDataNotify() with the same event (has been registered)
-#
-Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType, @R_DoneEvent ,&@R_Status"
-GetAck
-set assert [VerifyReturnStatus R_Status $EFI_ACCESS_DENIED]
-RecordAssertion $assert $Ip6ConfigRegisterDataNotifyConf3AssertionGuid001 \
- "Ip6Config.RegisterDataNotify - Register notification event with the event registered already." \
- "ReturnStatus - $R_Status, ExpectedStatus - $EFI_ACCESS_DENIED"
-
-
-#
-# Clean up
-#
-SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
-Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
-GetAck
-set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
-RecordAssertion $assert $GenericAssertionGuid \
- "Ip6Config.UnregisterDataNotify - Unregister notification event for configuration." \
- "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
-
-BS->CloseEvent {@R_DoneEvent,&@R_Status}
-GetAck
-
-EndScope _IP6CONFIG_REGISTERDATANOTIFY_CONF3
-
+#
+# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
+# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
+#
+# This program and the accompanying materials
+# are licensed and made available under the terms and conditions of the BSD License
+# which accompanies this distribution. The full text of the license may be found at
+# http://opensource.org/licenses/bsd-license.php
+#
+# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+#
+################################################################################
+CaseLevel CONFORMANCE
+CaseAttribute AUTO
+CaseVerboseLevel DEFAULT
+set reportfile report.csv
+
+#
+# test case Name, category, description, GUID...
+#
+CaseGuid B00EBD2E-F23E-434e-80E8-2A17C3BCFDFE
+CaseName RegisterDataNotify.Conf3.Case1
+CaseCategory IP6Config
+CaseDescription {RegisterDataNotify must not succeed when event has already registered.}
+
+################################################################################
+Include IP6Config/Include/Ip6Config.inc.tcl
+
+
+#
+# Begin log ...
+#
+BeginLog
+
+#
+# BeginScope
+#
+BeginScope _IP6CONFIG_REGISTERDATANOTIFY_CONF3
+
+#
+# Parameter Definition
+# R_ represents "Remote EFI Side Parameter"
+# L_ represents "Local ENTS Side Parameter"
+#
+UINTN R_Status
+UINTN R_Context
+UINTN R_DoneEvent
+UINTN R_Ip6ConfigDataSize
+UINT32 R_Ip6ConfigDataType
+EFI_IP6_CONFIG_INTERFACE_INFO R_Ip6ConfigInterfaceInfo
+EFI_IP6_CONFIG_INTERFACE_ID R_Ip6ConfigInterfaceId
+UINT32 R_Ip6ConfigPolicy
+EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS R_Ip6ConfigDadTransmits
+
+#
+# Check Point: Call Ip6Config->SetData to set manual policy
+#
+SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
+SetVar R_Ip6ConfigDataSize [Sizeof UINT32]
+SetVar R_Ip6ConfigPolicy $IP6CP(Manual)
+
+SetVar R_Context 0
+BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context,\
+ &@R_DoneEvent, &@R_Status"
+GetAck
+set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
+RecordAssertion $assert $GenericAssertionGuid \
+ "BS.CreateEvent." \
+ "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
+
+#
+# Check Point: Call Ip6Config->RegisterDataNotify with valid parameters
+#
+Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType, @R_DoneEvent ,&@R_Status"
+GetAck
+set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
+RecordAssertion $assert $GenericAssertionGuid \
+ "Ip6Config.RegisterDataNotify - Register notification event with valid parameters." \
+ "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
+
+#
+# Check Point : Call RegisterDataNotify() with the same event (has been registered)
+#
+Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType, @R_DoneEvent ,&@R_Status"
+GetAck
+set assert [VerifyReturnStatus R_Status $EFI_ACCESS_DENIED]
+RecordAssertion $assert $Ip6ConfigRegisterDataNotifyConf3AssertionGuid001 \
+ "Ip6Config.RegisterDataNotify - Register notification event with the event registered already." \
+ "ReturnStatus - $R_Status, ExpectedStatus - $EFI_ACCESS_DENIED"
+
+
+#
+# Clean up
+#
+SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
+Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
+GetAck
+set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
+RecordAssertion $assert $GenericAssertionGuid \
+ "Ip6Config.UnregisterDataNotify - Unregister notification event for configuration." \
+ "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
+
+BS->CloseEvent {@R_DoneEvent,&@R_Status}
+GetAck
+
+EndScope _IP6CONFIG_REGISTERDATANOTIFY_CONF3
+
EndLog
\ No newline at end of file
diff --git a/uefi-sct/EMS/Bin/TestCase/IP6Config/RegisterDataNotify.Func1.Case1.tcl b/uefi-sct/EMS/Bin/TestCase/IP6Config/RegisterDataNotify.Func1.Case1.tcl
index 38be04c..b2b777c 100644
--- a/uefi-sct/EMS/Bin/TestCase/IP6Config/RegisterDataNotify.Func1.Case1.tcl
+++ b/uefi-sct/EMS/Bin/TestCase/IP6Config/RegisterDataNotify.Func1.Case1.tcl
@@ -1,539 +1,539 @@
-#
-# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
-# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
-#
-# This program and the accompanying materials
-# are licensed and made available under the terms and conditions of the BSD License
-# which accompanies this distribution. The full text of the license may be found at
-# http://opensource.org/licenses/bsd-license.php
-#
-# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
-# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-#
-################################################################################
-CaseLevel FUNCTION
-CaseAttribute AUTO
-CaseVerboseLevel DEFAULT
-set reportfile report.csv
-
-#
-# test case Name, category, description, GUID...
-#
-CaseGuid 7D041B9B-4F68-434a-A0C6-63FDC415D078
-CaseName RegisterDataNotify.Func1.Case1
-CaseCategory IP6Config
-CaseDescription {RegisterDataNotify must succeed with valid parameters when one event registered on one data type.}
-
-################################################################################
-Include IP6Config/Include/Ip6Config.inc.tcl
-
-
-#
-# Begin log ...
-#
-BeginLog
-
-#
-# BeginScope
-#
-BeginScope _IP6CONFIG_REGISTERDATANOTIFY_FUNC1_CASE1
-
-#
-# Parameter Definition
-# R_ represents "Remote EFI Side Parameter"
-# L_ represents "Local ENTS Side Parameter"
-#
-UINTN R_Status
-UINTN R_Context
-UINTN R_DoneEvent
-UINTN R_Context1
-UINTN R_DoneEvent1
-UINTN R_Context2
-UINTN R_DoneEvent2
-UINTN R_Ip6ConfigDataSize
-UINT32 R_Ip6ConfigDataType
-EFI_IP6_CONFIG_INTERFACE_INFO R_Ip6ConfigInterfaceInfo
-EFI_IP6_CONFIG_INTERFACE_ID R_Ip6ConfigInterfaceId
-UINT32 R_Ip6ConfigPolicy
-EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS R_Ip6ConfigDadTransmits
-
-#
-# Check Point: Call Ip6Config->SetData to set manual policy
-#
-SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
-SetVar R_Ip6ConfigDataSize [Sizeof UINT32]
-SetVar R_Ip6ConfigPolicy $IP6CP(Manual)
-
-SetVar R_Context 0
-BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context,\
- &@R_DoneEvent, &@R_Status"
-GetAck
-set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
-RecordAssertion $assert $GenericAssertionGuid \
- "BS.CreateEvent." \
- "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
-
-Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
-GetAck
-set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
-RecordAssertion $assert $GenericAssertionGuid \
- "Ip6Config.RegisterDataNotify - Register notification event for configuration." \
- "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
-
-Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_Status"
-GetAck
-GetVar R_Status
-if { $R_Status == $EFI_SUCCESS } {
- set assert pass
- RecordAssertion $assert $GenericAssertionGuid \
- "Ip6Config.SetData - Call SetData to set manual policy." \
- "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
-} elseif { $R_Status == $EFI_NOT_READY } {
- set i 0
- set L_TimeOut 30
- while { 1 > 0 } {
- GetVar R_Context
- if { $R_Context == 1 } {
- break
- } elseif { $i == $L_TimeOut } {
- set assert fail
- RecordAssertion $assert $GenericAssertionGuid \
- "SetData failed.(event hasn't been signaled before TIMEOUT)." \
- "TIMEOUT value is $L_TimeOut (sec), "
- SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
- Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
- GetAck
- BS->CloseEvent {@R_DoneEvent,&@R_Status}
- GetAck
- EndScope _IP6CONFIG_REGISTERDATANOTIFY_FUNC1_CASE1
- EndLog
- return
- }
- incr i
- Stall 1
- }
-} else {
- set assert fail
- RecordAssertion $assert $GenericAssertionGuid \
- "Ip6Config.SetData - Call SetData to set manual policy." \
- "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
-
- SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
- Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
- GetAck
- BS->CloseEvent {@R_DoneEvent,&@R_Status}
- GetAck
- EndScope _IP6CONFIG_REGISTERDATANOTIFY_FUNC1_CASE1
- EndLog
- return
-}
-
-Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_Status"
-GetAck
-set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
-RecordAssertion $assert $GenericAssertionGuid \
- "Ip6Config.GetData - Call GetData to get policy value." \
- "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
-GetVar R_Ip6ConfigPolicy
-if { $R_Ip6ConfigPolicy == $IP6CP(Manual) } {
- set assert pass
-} else {
- set assert fail
-
- RecordAssertion $assert $GenericAssertionGuid \
- "Set manual policy succeeds(event is signaled correctly and data correct)."
- SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
- Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
- GetAck
- BS->CloseEvent {@R_DoneEvent,&@R_Status}
- GetAck
- EndScope _IP6CONFIG_REGISTERDATANOTIFY_FUNC1_CASE1
- EndLog
- return
-}
-RecordAssertion $assert $GenericAssertionGuid \
- "Set manual policy succeeds(event is signaled correctly and data correct)."
-
-#
-# Check Point: Call Ip6Config->SetData to set DadXmits 0
-#
-SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
-SetVar R_Ip6ConfigDataSize [Sizeof EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS]
-SetVar R_Ip6ConfigDadTransmits.DupAddrDetectTransmits 0
-
-SetVar R_Context1 0
-BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context1,\
- &@R_DoneEvent1, &@R_Status"
-GetAck
-set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
-RecordAssertion $assert $GenericAssertionGuid \
- "BS.CreateEvent." \
- "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
-
-Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
-GetAck
-set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
-RecordAssertion $assert $GenericAssertionGuid \
- "Ip6Config.RegisterDataNotify - Register notification event for configuration." \
- "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
-
-Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigDadTransmits,&@R_Status"
-GetAck
-GetVar R_Status
-if { $R_Status == $EFI_SUCCESS } {
- set assert pass
- RecordAssertion $assert $GenericAssertionGuid \
- "Ip6Config.SetData - Call SetData to set DadXmits 0." \
- "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
-} elseif { $R_Status == $EFI_NOT_READY } {
- set i 0
- set L_TimeOut 30
- while { 1 > 0 } {
- GetVar R_Context1
- if { $R_Context1 == 1 } {
- break
- } elseif { $i == $L_TimeOut } {
- set assert fail
- RecordAssertion $assert $GenericAssertionGuid \
- "SetData failed.(event hasn't been signaled before TIMEOUT)." \
- "TIMEOUT value is $L_TimeOut (sec), "
- SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
- Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
- GetAck
- BS->CloseEvent {@R_DoneEvent,&@R_Status}
- GetAck
- SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
- Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
- GetAck
- BS->CloseEvent {@R_DoneEvent1,&@R_Status}
- GetAck
- EndScope _IP6CONFIG_REGISTERDATANOTIFY_FUNC1_CASE1
- EndLog
- return
- }
- incr i
- Stall 1
- }
-} else {
- set assert fail
- RecordAssertion $assert $GenericAssertionGuid \
- "Ip6Config.SetData - Call SetData to set DadXmits 0." \
- "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
-
- SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
- Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
- GetAck
- BS->CloseEvent {@R_DoneEvent,&@R_Status}
- GetAck
- SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
- Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
- GetAck
- BS->CloseEvent {@R_DoneEvent1,&@R_Status}
- GetAck
- EndScope _IP6CONFIG_REGISTERDATANOTIFY_FUNC1_CASE1
- EndLog
- return
-}
-
-Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigDadTransmits,&@R_Status"
-GetAck
-set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
-RecordAssertion $assert $GenericAssertionGuid \
- "Ip6Config.GetData - Call GetData to get DadXmits value." \
- "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
-GetVar R_Ip6ConfigDadTransmits.DupAddrDetectTransmits
-if { ${R_Ip6ConfigDadTransmits.DupAddrDetectTransmits} == 0 } {
- set assert pass
-} else {
- set assert fail
-
- RecordAssertion $assert $GenericAssertionGuid \
- "Set DadXmits succeeds(event is signaled correctly and data correct)."
- SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
- Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
- GetAck
- BS->CloseEvent {@R_DoneEvent,&@R_Status}
- GetAck
- SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
- Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
- GetAck
- BS->CloseEvent {@R_DoneEvent1,&@R_Status}
- GetAck
- EndScope _IP6CONFIG_REGISTERDATANOTIFY_FUNC1_CASE1
- EndLog
- return
-}
-RecordAssertion $assert $GenericAssertionGuid \
- "Set DadXmits succeeds(event is signaled correctly and data correct)."
-
-#
-# Check Point : Set Manual Address with valid parameter
-#
-EFI_IP6_CONFIG_MANUAL_ADDRESS R_Temp_Ip6ConfigManualAddress
-
-set L_ManualListLen 1
-EFI_IP6_CONFIG_MANUAL_ADDRESS R_Ip6ConfigManualAddress
-set L_UnitLen [Sizeof EFI_IP6_CONFIG_MANUAL_ADDRESS]
-set L_ListLen [expr {$L_UnitLen * $L_ManualListLen}]
-SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
-SetVar R_Ip6ConfigDataSize $L_ListLen
-SetVar R_Temp_Ip6ConfigManualAddress.IsAnycast FALSE
-SetVar R_Temp_Ip6ConfigManualAddress.PrefixLength 64
-SetIpv6Address R_Temp_Ip6ConfigManualAddress.Address "2002::5000"
-SetVar R_Ip6ConfigManualAddress @R_Temp_Ip6ConfigManualAddress
-#
-# Register Event for Manual Address
-#
-SetVar R_Context2 0
-BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context2,\
- &@R_DoneEvent2, &@R_Status"
-GetAck
-set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
-RecordAssertion $assert $GenericAssertionGuid \
- "BS.CreateEvent." \
- "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
-
-Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent2,&@R_Status"
-GetAck
-set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
-RecordAssertion $assert $Ip6ConfigRegisterDataNotifyFunc1AssertionGuid001 \
- "Ip6Config.RegisterDataNotify - Register notification event for configuration." \
- "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
-
-Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigManualAddress,&@R_Status"
-GetAck
-GetVar R_Status
-if { $R_Status == $EFI_SUCCESS } {
- set assert pass
- RecordAssertion $assert $GenericAssertionGuid \
- "Ip6Config.SetData - Call SetData to set manual address." \
- "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
-} elseif { $R_Status == $EFI_NOT_READY } {
- set i 0
- set L_TimeOut 30
- while { 1 > 0 } {
- GetVar R_Context2
- if { $R_Context2 == 1 } {
- break
- } elseif { $i == $L_TimeOut } {
- set assert fail
- RecordAssertion $assert $GenericAssertionGuid \
- "SetData failed.(event hasn't been signaled before TIMEOUT)." \
- "TIMEOUT value is $L_TimeOut (sec), "
- SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
- Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
- GetAck
- BS->CloseEvent {@R_DoneEvent,&@R_Status}
- GetAck
- SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
- Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
- GetAck
- BS->CloseEvent {@R_DoneEvent1,&@R_Status}
- GetAck
- SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
- Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent2,&@R_Status"
- GetAck
- BS->CloseEvent {@R_DoneEvent2,&@R_Status}
- GetAck
- EndScope _IP6CONFIG_REGISTERDATANOTIFY_FUNC1_CASE1
- EndLog
- return
- }
- incr i
- Stall 1
- }
-} else {
- set assert fail
- RecordAssertion $assert $GenericAssertionGuid \
- "Ip6Config.SetData - Call SetData to set manual address." \
- "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
-
- SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
- Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
- GetAck
- BS->CloseEvent {@R_DoneEvent,&@R_Status}
- GetAck
- SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
- Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
- GetAck
- BS->CloseEvent {@R_DoneEvent1,&@R_Status}
- GetAck
- SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
- Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent2,&@R_Status"
- GetAck
- BS->CloseEvent {@R_DoneEvent2,&@R_Status}
- GetAck
- EndScope _IP6CONFIG_REGISTERDATANOTIFY_FUNC1_CASE1
- EndLog
- return
-}
-
-#
-# Check Events for registered datatype
-#
-GetVar R_Context2
-if { $R_Context2 == 1 } {
- set assert pass
-} else {
- set assert fail
-}
-RecordAssertion $assert $Ip6ConfigRegisterDataNotifyFunc1AssertionGuid002 \
- "Ip6Config.RegisterDataNotify - Registered event is signaled."
-
-#
-# GetData to verfiy the data setting
-#
-Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigManualAddress,&@R_Status"
-GetAck
-set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
-RecordAssertion $assert $GenericAssertionGuid \
- "Ip6Config.GetData - Call GetData to get manual address." \
- "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
-
-GetVar R_Ip6ConfigManualAddress.IsAnycast
-if { ${R_Ip6ConfigManualAddress.IsAnycast} == FALSE } {
- set assert pass
-} else {
- set assert fail
-}
-GetVar R_Ip6ConfigManualAddress.PrefixLength
-if { ${R_Ip6ConfigManualAddress.PrefixLength} == 64 } {
- set assert pass
-} else {
- set assert fail
-}
-GetVar R_Ip6ConfigManualAddress.Address
-set L_ManualAddress "2002:0000:0000:0000:0000:0000:0000:5000"
-set L_RemoteAddress [ GetIpv6Address {R_Ip6ConfigManualAddress.Address} ]
-if { [ string compare $L_RemoteAddress $L_ManualAddress ] == 0 } {
- set assert pass
-} else {
- set assert fail
-}
-RecordAssertion $assert $GenericAssertionGuid \
- "Set ManualAddress succeeds(event is signaled correctly and data correct)."
-
-#
-# Set automatic policy (this will clean up all address information configured)
-#
-SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
-SetVar R_Ip6ConfigDataSize [Sizeof UINT32]
-SetVar R_Ip6ConfigPolicy $IP6CP(Automatic)
-
-SetVar R_Context 0
-
-Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_Status"
-GetAck
-GetVar R_Status
-if { $R_Status == $EFI_SUCCESS } {
- set assert pass
-} elseif { $R_Status == $EFI_NOT_READY } {
- set i 0
- set L_TimeOut 30
- set assert pass
- while { 1 > 0 } {
- GetVar R_Context
- if { $R_Context == 1 } {
- break
- } elseif { $i == $L_TimeOut } {
- set assert fail
-
- SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
- Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
- GetAck
- BS->CloseEvent {@R_DoneEvent,&@R_Status}
- GetAck
- SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
- Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
- GetAck
- BS->CloseEvent {@R_DoneEvent1,&@R_Status}
- GetAck
- SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
- Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent2,&@R_Status"
- GetAck
- BS->CloseEvent {@R_DoneEvent2,&@R_Status}
- GetAck
-
- EndScope _IP6CONFIG_REGISTERDATANOTIFY_FUNC1_CASE1
- EndLog
- return
- }
- incr i
- Stall 1
- }
-} else {
- set assert fail
-
- SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
- Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
- GetAck
- BS->CloseEvent {@R_DoneEvent,&@R_Status}
- GetAck
- SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
- Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
- GetAck
- BS->CloseEvent {@R_DoneEvent1,&@R_Status}
- GetAck
- SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
- Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent2,&@R_Status"
- GetAck
- BS->CloseEvent {@R_DoneEvent2,&@R_Status}
- GetAck
-
- EndScope _IP6CONFIG_REGISTERDATANOTIFY_FUNC1_CASE1
- EndLog
- return
-}
-
-Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_Status"
-GetAck
-GetVar R_Ip6ConfigPolicy
-if { $R_Ip6ConfigPolicy == $IP6CP(Automatic) } {
- set assert pass
-} else {
- set assert fail
-}
-
-RecordAssertion $assert $GenericAssertionGuid \
- "Ip6Config.SetData - Set automatic policy to clean up the former configuration." \
- "TimeUsed - $i, TimeOut Value- $L_TimeOut"
-
-#
-# Clean up
-#
-SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
-Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
-GetAck
-set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
-RecordAssertion $assert $GenericAssertionGuid \
- "Ip6Config.UnregisterDataNotify - Unregister notification event for configuration." \
- "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
-
-BS->CloseEvent {@R_DoneEvent,&@R_Status}
-GetAck
-
-SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
-Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
-GetAck
-set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
-RecordAssertion $assert $GenericAssertionGuid \
- "Ip6Config.UnregisterDataNotify - Unregister notification event for configuration." \
- "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
-
-BS->CloseEvent {@R_DoneEvent1,&@R_Status}
-GetAck
-
-SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
-Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent2,&@R_Status"
-GetAck
-set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
-RecordAssertion $assert $GenericAssertionGuid \
- "Ip6Config.UnregisterDataNotify - Unregister notification event for configuration." \
- "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
-
-BS->CloseEvent {@R_DoneEvent2,&@R_Status}
-GetAck
-
-EndScope _IP6CONFIG_REGISTERDATANOTIFY_FUNC1_CASE1
-
+#
+# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
+# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
+#
+# This program and the accompanying materials
+# are licensed and made available under the terms and conditions of the BSD License
+# which accompanies this distribution. The full text of the license may be found at
+# http://opensource.org/licenses/bsd-license.php
+#
+# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+#
+################################################################################
+CaseLevel FUNCTION
+CaseAttribute AUTO
+CaseVerboseLevel DEFAULT
+set reportfile report.csv
+
+#
+# test case Name, category, description, GUID...
+#
+CaseGuid 7D041B9B-4F68-434a-A0C6-63FDC415D078
+CaseName RegisterDataNotify.Func1.Case1
+CaseCategory IP6Config
+CaseDescription {RegisterDataNotify must succeed with valid parameters when one event registered on one data type.}
+
+################################################################################
+Include IP6Config/Include/Ip6Config.inc.tcl
+
+
+#
+# Begin log ...
+#
+BeginLog
+
+#
+# BeginScope
+#
+BeginScope _IP6CONFIG_REGISTERDATANOTIFY_FUNC1_CASE1
+
+#
+# Parameter Definition
+# R_ represents "Remote EFI Side Parameter"
+# L_ represents "Local ENTS Side Parameter"
+#
+UINTN R_Status
+UINTN R_Context
+UINTN R_DoneEvent
+UINTN R_Context1
+UINTN R_DoneEvent1
+UINTN R_Context2
+UINTN R_DoneEvent2
+UINTN R_Ip6ConfigDataSize
+UINT32 R_Ip6ConfigDataType
+EFI_IP6_CONFIG_INTERFACE_INFO R_Ip6ConfigInterfaceInfo
+EFI_IP6_CONFIG_INTERFACE_ID R_Ip6ConfigInterfaceId
+UINT32 R_Ip6ConfigPolicy
+EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS R_Ip6ConfigDadTransmits
+
+#
+# Check Point: Call Ip6Config->SetData to set manual policy
+#
+SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
+SetVar R_Ip6ConfigDataSize [Sizeof UINT32]
+SetVar R_Ip6ConfigPolicy $IP6CP(Manual)
+
+SetVar R_Context 0
+BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context,\
+ &@R_DoneEvent, &@R_Status"
+GetAck
+set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
+RecordAssertion $assert $GenericAssertionGuid \
+ "BS.CreateEvent." \
+ "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
+
+Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
+GetAck
+set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
+RecordAssertion $assert $GenericAssertionGuid \
+ "Ip6Config.RegisterDataNotify - Register notification event for configuration." \
+ "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
+
+Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_Status"
+GetAck
+GetVar R_Status
+if { $R_Status == $EFI_SUCCESS } {
+ set assert pass
+ RecordAssertion $assert $GenericAssertionGuid \
+ "Ip6Config.SetData - Call SetData to set manual policy." \
+ "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
+} elseif { $R_Status == $EFI_NOT_READY } {
+ set i 0
+ set L_TimeOut 30
+ while { 1 > 0 } {
+ GetVar R_Context
+ if { $R_Context == 1 } {
+ break
+ } elseif { $i == $L_TimeOut } {
+ set assert fail
+ RecordAssertion $assert $GenericAssertionGuid \
+ "SetData failed.(event hasn't been signaled before TIMEOUT)." \
+ "TIMEOUT value is $L_TimeOut (sec), "
+ SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
+ Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
+ GetAck
+ BS->CloseEvent {@R_DoneEvent,&@R_Status}
+ GetAck
+ EndScope _IP6CONFIG_REGISTERDATANOTIFY_FUNC1_CASE1
+ EndLog
+ return
+ }
+ incr i
+ Stall 1
+ }
+} else {
+ set assert fail
+ RecordAssertion $assert $GenericAssertionGuid \
+ "Ip6Config.SetData - Call SetData to set manual policy." \
+ "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
+
+ SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
+ Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
+ GetAck
+ BS->CloseEvent {@R_DoneEvent,&@R_Status}
+ GetAck
+ EndScope _IP6CONFIG_REGISTERDATANOTIFY_FUNC1_CASE1
+ EndLog
+ return
+}
+
+Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_Status"
+GetAck
+set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
+RecordAssertion $assert $GenericAssertionGuid \
+ "Ip6Config.GetData - Call GetData to get policy value." \
+ "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
+GetVar R_Ip6ConfigPolicy
+if { $R_Ip6ConfigPolicy == $IP6CP(Manual) } {
+ set assert pass
+} else {
+ set assert fail
+
+ RecordAssertion $assert $GenericAssertionGuid \
+ "Set manual policy succeeds(event is signaled correctly and data correct)."
+ SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
+ Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
+ GetAck
+ BS->CloseEvent {@R_DoneEvent,&@R_Status}
+ GetAck
+ EndScope _IP6CONFIG_REGISTERDATANOTIFY_FUNC1_CASE1
+ EndLog
+ return
+}
+RecordAssertion $assert $GenericAssertionGuid \
+ "Set manual policy succeeds(event is signaled correctly and data correct)."
+
+#
+# Check Point: Call Ip6Config->SetData to set DadXmits 0
+#
+SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
+SetVar R_Ip6ConfigDataSize [Sizeof EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS]
+SetVar R_Ip6ConfigDadTransmits.DupAddrDetectTransmits 0
+
+SetVar R_Context1 0
+BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context1,\
+ &@R_DoneEvent1, &@R_Status"
+GetAck
+set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
+RecordAssertion $assert $GenericAssertionGuid \
+ "BS.CreateEvent." \
+ "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
+
+Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
+GetAck
+set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
+RecordAssertion $assert $GenericAssertionGuid \
+ "Ip6Config.RegisterDataNotify - Register notification event for configuration." \
+ "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
+
+Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigDadTransmits,&@R_Status"
+GetAck
+GetVar R_Status
+if { $R_Status == $EFI_SUCCESS } {
+ set assert pass
+ RecordAssertion $assert $GenericAssertionGuid \
+ "Ip6Config.SetData - Call SetData to set DadXmits 0." \
+ "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
+} elseif { $R_Status == $EFI_NOT_READY } {
+ set i 0
+ set L_TimeOut 30
+ while { 1 > 0 } {
+ GetVar R_Context1
+ if { $R_Context1 == 1 } {
+ break
+ } elseif { $i == $L_TimeOut } {
+ set assert fail
+ RecordAssertion $assert $GenericAssertionGuid \
+ "SetData failed.(event hasn't been signaled before TIMEOUT)." \
+ "TIMEOUT value is $L_TimeOut (sec), "
+ SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
+ Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
+ GetAck
+ BS->CloseEvent {@R_DoneEvent,&@R_Status}
+ GetAck
+ SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
+ Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
+ GetAck
+ BS->CloseEvent {@R_DoneEvent1,&@R_Status}
+ GetAck
+ EndScope _IP6CONFIG_REGISTERDATANOTIFY_FUNC1_CASE1
+ EndLog
+ return
+ }
+ incr i
+ Stall 1
+ }
+} else {
+ set assert fail
+ RecordAssertion $assert $GenericAssertionGuid \
+ "Ip6Config.SetData - Call SetData to set DadXmits 0." \
+ "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
+
+ SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
+ Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
+ GetAck
+ BS->CloseEvent {@R_DoneEvent,&@R_Status}
+ GetAck
+ SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
+ Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
+ GetAck
+ BS->CloseEvent {@R_DoneEvent1,&@R_Status}
+ GetAck
+ EndScope _IP6CONFIG_REGISTERDATANOTIFY_FUNC1_CASE1
+ EndLog
+ return
+}
+
+Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigDadTransmits,&@R_Status"
+GetAck
+set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
+RecordAssertion $assert $GenericAssertionGuid \
+ "Ip6Config.GetData - Call GetData to get DadXmits value." \
+ "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
+GetVar R_Ip6ConfigDadTransmits.DupAddrDetectTransmits
+if { ${R_Ip6ConfigDadTransmits.DupAddrDetectTransmits} == 0 } {
+ set assert pass
+} else {
+ set assert fail
+
+ RecordAssertion $assert $GenericAssertionGuid \
+ "Set DadXmits succeeds(event is signaled correctly and data correct)."
+ SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
+ Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
+ GetAck
+ BS->CloseEvent {@R_DoneEvent,&@R_Status}
+ GetAck
+ SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
+ Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
+ GetAck
+ BS->CloseEvent {@R_DoneEvent1,&@R_Status}
+ GetAck
+ EndScope _IP6CONFIG_REGISTERDATANOTIFY_FUNC1_CASE1
+ EndLog
+ return
+}
+RecordAssertion $assert $GenericAssertionGuid \
+ "Set DadXmits succeeds(event is signaled correctly and data correct)."
+
+#
+# Check Point : Set Manual Address with valid parameter
+#
+EFI_IP6_CONFIG_MANUAL_ADDRESS R_Temp_Ip6ConfigManualAddress
+
+set L_ManualListLen 1
+EFI_IP6_CONFIG_MANUAL_ADDRESS R_Ip6ConfigManualAddress
+set L_UnitLen [Sizeof EFI_IP6_CONFIG_MANUAL_ADDRESS]
+set L_ListLen [expr {$L_UnitLen * $L_ManualListLen}]
+SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
+SetVar R_Ip6ConfigDataSize $L_ListLen
+SetVar R_Temp_Ip6ConfigManualAddress.IsAnycast FALSE
+SetVar R_Temp_Ip6ConfigManualAddress.PrefixLength 64
+SetIpv6Address R_Temp_Ip6ConfigManualAddress.Address "2002::5000"
+SetVar R_Ip6ConfigManualAddress @R_Temp_Ip6ConfigManualAddress
+#
+# Register Event for Manual Address
+#
+SetVar R_Context2 0
+BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context2,\
+ &@R_DoneEvent2, &@R_Status"
+GetAck
+set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
+RecordAssertion $assert $GenericAssertionGuid \
+ "BS.CreateEvent." \
+ "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
+
+Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent2,&@R_Status"
+GetAck
+set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
+RecordAssertion $assert $Ip6ConfigRegisterDataNotifyFunc1AssertionGuid001 \
+ "Ip6Config.RegisterDataNotify - Register notification event for configuration." \
+ "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
+
+Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigManualAddress,&@R_Status"
+GetAck
+GetVar R_Status
+if { $R_Status == $EFI_SUCCESS } {
+ set assert pass
+ RecordAssertion $assert $GenericAssertionGuid \
+ "Ip6Config.SetData - Call SetData to set manual address." \
+ "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
+} elseif { $R_Status == $EFI_NOT_READY } {
+ set i 0
+ set L_TimeOut 30
+ while { 1 > 0 } {
+ GetVar R_Context2
+ if { $R_Context2 == 1 } {
+ break
+ } elseif { $i == $L_TimeOut } {
+ set assert fail
+ RecordAssertion $assert $GenericAssertionGuid \
+ "SetData failed.(event hasn't been signaled before TIMEOUT)." \
+ "TIMEOUT value is $L_TimeOut (sec), "
+ SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
+ Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
+ GetAck
+ BS->CloseEvent {@R_DoneEvent,&@R_Status}
+ GetAck
+ SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
+ Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
+ GetAck
+ BS->CloseEvent {@R_DoneEvent1,&@R_Status}
+ GetAck
+ SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
+ Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent2,&@R_Status"
+ GetAck
+ BS->CloseEvent {@R_DoneEvent2,&@R_Status}
+ GetAck
+ EndScope _IP6CONFIG_REGISTERDATANOTIFY_FUNC1_CASE1
+ EndLog
+ return
+ }
+ incr i
+ Stall 1
+ }
+} else {
+ set assert fail
+ RecordAssertion $assert $GenericAssertionGuid \
+ "Ip6Config.SetData - Call SetData to set manual address." \
+ "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
+
+ SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
+ Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
+ GetAck
+ BS->CloseEvent {@R_DoneEvent,&@R_Status}
+ GetAck
+ SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
+ Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
+ GetAck
+ BS->CloseEvent {@R_DoneEvent1,&@R_Status}
+ GetAck
+ SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
+ Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent2,&@R_Status"
+ GetAck
+ BS->CloseEvent {@R_DoneEvent2,&@R_Status}
+ GetAck
+ EndScope _IP6CONFIG_REGISTERDATANOTIFY_FUNC1_CASE1
+ EndLog
+ return
+}
+
+#
+# Check Events for registered datatype
+#
+GetVar R_Context2
+if { $R_Context2 == 1 } {
+ set assert pass
+} else {
+ set assert fail
+}
+RecordAssertion $assert $Ip6ConfigRegisterDataNotifyFunc1AssertionGuid002 \
+ "Ip6Config.RegisterDataNotify - Registered event is signaled."
+
+#
+# GetData to verfiy the data setting
+#
+Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigManualAddress,&@R_Status"
+GetAck
+set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
+RecordAssertion $assert $GenericAssertionGuid \
+ "Ip6Config.GetData - Call GetData to get manual address." \
+ "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
+
+GetVar R_Ip6ConfigManualAddress.IsAnycast
+if { ${R_Ip6ConfigManualAddress.IsAnycast} == FALSE } {
+ set assert pass
+} else {
+ set assert fail
+}
+GetVar R_Ip6ConfigManualAddress.PrefixLength
+if { ${R_Ip6ConfigManualAddress.PrefixLength} == 64 } {
+ set assert pass
+} else {
+ set assert fail
+}
+GetVar R_Ip6ConfigManualAddress.Address
+set L_ManualAddress "2002:0000:0000:0000:0000:0000:0000:5000"
+set L_RemoteAddress [ GetIpv6Address {R_Ip6ConfigManualAddress.Address} ]
+if { [ string compare $L_RemoteAddress $L_ManualAddress ] == 0 } {
+ set assert pass
+} else {
+ set assert fail
+}
+RecordAssertion $assert $GenericAssertionGuid \
+ "Set ManualAddress succeeds(event is signaled correctly and data correct)."
+
+#
+# Set automatic policy (this will clean up all address information configured)
+#
+SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
+SetVar R_Ip6ConfigDataSize [Sizeof UINT32]
+SetVar R_Ip6ConfigPolicy $IP6CP(Automatic)
+
+SetVar R_Context 0
+
+Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_Status"
+GetAck
+GetVar R_Status
+if { $R_Status == $EFI_SUCCESS } {
+ set assert pass
+} elseif { $R_Status == $EFI_NOT_READY } {
+ set i 0
+ set L_TimeOut 30
+ set assert pass
+ while { 1 > 0 } {
+ GetVar R_Context
+ if { $R_Context == 1 } {
+ break
+ } elseif { $i == $L_TimeOut } {
+ set assert fail
+
+ SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
+ Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
+ GetAck
+ BS->CloseEvent {@R_DoneEvent,&@R_Status}
+ GetAck
+ SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
+ Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
+ GetAck
+ BS->CloseEvent {@R_DoneEvent1,&@R_Status}
+ GetAck
+ SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
+ Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent2,&@R_Status"
+ GetAck
+ BS->CloseEvent {@R_DoneEvent2,&@R_Status}
+ GetAck
+
+ EndScope _IP6CONFIG_REGISTERDATANOTIFY_FUNC1_CASE1
+ EndLog
+ return
+ }
+ incr i
+ Stall 1
+ }
+} else {
+ set assert fail
+
+ SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
+ Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
+ GetAck
+ BS->CloseEvent {@R_DoneEvent,&@R_Status}
+ GetAck
+ SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
+ Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
+ GetAck
+ BS->CloseEvent {@R_DoneEvent1,&@R_Status}
+ GetAck
+ SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
+ Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent2,&@R_Status"
+ GetAck
+ BS->CloseEvent {@R_DoneEvent2,&@R_Status}
+ GetAck
+
+ EndScope _IP6CONFIG_REGISTERDATANOTIFY_FUNC1_CASE1
+ EndLog
+ return
+}
+
+Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_Status"
+GetAck
+GetVar R_Ip6ConfigPolicy
+if { $R_Ip6ConfigPolicy == $IP6CP(Automatic) } {
+ set assert pass
+} else {
+ set assert fail
+}
+
+RecordAssertion $assert $GenericAssertionGuid \
+ "Ip6Config.SetData - Set automatic policy to clean up the former configuration." \
+ "TimeUsed - $i, TimeOut Value- $L_TimeOut"
+
+#
+# Clean up
+#
+SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
+Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
+GetAck
+set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
+RecordAssertion $assert $GenericAssertionGuid \
+ "Ip6Config.UnregisterDataNotify - Unregister notification event for configuration." \
+ "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
+
+BS->CloseEvent {@R_DoneEvent,&@R_Status}
+GetAck
+
+SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
+Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
+GetAck
+set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
+RecordAssertion $assert $GenericAssertionGuid \
+ "Ip6Config.UnregisterDataNotify - Unregister notification event for configuration." \
+ "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
+
+BS->CloseEvent {@R_DoneEvent1,&@R_Status}
+GetAck
+
+SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
+Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent2,&@R_Status"
+GetAck
+set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
+RecordAssertion $assert $GenericAssertionGuid \
+ "Ip6Config.UnregisterDataNotify - Unregister notification event for configuration." \
+ "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
+
+BS->CloseEvent {@R_DoneEvent2,&@R_Status}
+GetAck
+
+EndScope _IP6CONFIG_REGISTERDATANOTIFY_FUNC1_CASE1
+
EndLog
\ No newline at end of file
diff --git a/uefi-sct/EMS/Bin/TestCase/IP6Config/RegisterDataNotify.Func1.Case2.tcl b/uefi-sct/EMS/Bin/TestCase/IP6Config/RegisterDataNotify.Func1.Case2.tcl
index bd52067..6f7e51f 100644
--- a/uefi-sct/EMS/Bin/TestCase/IP6Config/RegisterDataNotify.Func1.Case2.tcl
+++ b/uefi-sct/EMS/Bin/TestCase/IP6Config/RegisterDataNotify.Func1.Case2.tcl
@@ -1,266 +1,266 @@
-#
-# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
-# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
-#
-# This program and the accompanying materials
-# are licensed and made available under the terms and conditions of the BSD License
-# which accompanies this distribution. The full text of the license may be found at
-# http://opensource.org/licenses/bsd-license.php
-#
-# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
-# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-#
-################################################################################
-CaseLevel FUNCTION
-CaseAttribute AUTO
-CaseVerboseLevel DEFAULT
-set reportfile report.csv
-
-#
-# test case Name, category, description, GUID...
-#
-CaseGuid 886AE98A-5D43-47b4-A339-85FB089F21FA
-CaseName RegisterDataNotify.Func1.Case2
-CaseCategory IP6Config
-CaseDescription {RegisterDataNotify must succeed with valid parameters when one event registered on two data types.}
-
-################################################################################
-Include IP6Config/Include/Ip6Config.inc.tcl
-
-
-#
-# Begin log ...
-#
-BeginLog
-
-#
-# BeginScope
-#
-BeginScope _IP6CONFIG_REGISTERDATANOTIFY_FUNC1_CASE2
-
-#
-# Parameter Definition
-# R_ represents "Remote EFI Side Parameter"
-# L_ represents "Local ENTS Side Parameter"
-#
-UINTN R_Status
-UINTN R_Context
-UINTN R_DoneEvent
-UINTN R_Ip6ConfigDataSize
-UINT32 R_Ip6ConfigDataType
-EFI_IP6_CONFIG_INTERFACE_INFO R_Ip6ConfigInterfaceInfo
-EFI_IP6_CONFIG_INTERFACE_ID R_Ip6ConfigInterfaceId
-UINT32 R_Ip6ConfigPolicy
-EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS R_Ip6ConfigDadTransmits
-
-#
-# Check Point: Create Event and register it with data type [Policy] and [DadXmits]
-#
-SetVar R_Context 0
-BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context,\
- &@R_DoneEvent, &@R_Status"
-GetAck
-set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
-RecordAssertion $assert $GenericAssertionGuid \
- "BS.CreateEvent." \
- "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
-
-SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
-SetVar R_Ip6ConfigDataSize [Sizeof UINT32]
-SetVar R_Ip6ConfigPolicy $IP6CP(Manual)
-
-Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
-GetAck
-set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
-RecordAssertion $assert $Ip6ConfigRegisterDataNotifyFunc1AssertionGuid003 \
- "Ip6Config.RegisterDataNotify - Register notification event for configuration." \
- "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
-
-SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
-SetVar R_Ip6ConfigDataSize [Sizeof EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS]
-SetVar R_Ip6ConfigDadTransmits.DupAddrDetectTransmits 3
-
-Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
-GetAck
-set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
-RecordAssertion $assert $Ip6ConfigRegisterDataNotifyFunc1AssertionGuid004 \
- "Ip6Config.RegisterDataNotify - Register notification event for configuration." \
- "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
-
-#
-# Check Point: Call Ip6Cofnig->SetData to set [Policy] and check whether the event is signaled.
-#
-SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
-SetVar R_Ip6ConfigDataSize [Sizeof UINT32]
-SetVar R_Ip6ConfigPolicy $IP6CP(Manual)
-
-GetVar R_Context
-set L_Context1 $R_Context
-set L_Context2 [expr { $L_Context1 + 1 }]
-
-Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_Status"
-GetAck
-GetVar R_Status
-
-if { $R_Status == $EFI_SUCCESS } {
- set assert pass
- RecordAssertion $assert $GenericAssertionGuid \
- "Ip6Config.SetData - Call SetData to set manual policy." \
- "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
-} elseif { $R_Status == $EFI_NOT_READY } {
- set i 0
- set L_TimeOut 30
- while { 1 > 0 } {
- GetVar R_Context
- if { $R_Context == $L_Context2 } {
- break
- } elseif { $i == $L_TimeOut } {
- set assert fail
- RecordAssertion $assert $GenericAssertionGuid \
- "SetData failed.(event hasn't been signaled before TIMEOUT)." \
- "TIMEOUT value is $L_TimeOut (sec), "
- SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
- Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
- GetAck
- SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
- Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
- GetAck
- BS->CloseEvent {@R_DoneEvent,&@R_Status}
- GetAck
- EndScope _IP6CONFIG_REGISTERDATANOTIFY_FUNC1_CASE2
- EndLog
- return
- }
- incr i
- Stall 1
- }
-} else {
- set assert fail
- RecordAssertion $assert $GenericAssertionGuid \
- "Ip6Config.SetData - Call SetData to set manual policy." \
- "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
-
- SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
- Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
- GetAck
- SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
- Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
- GetAck
- BS->CloseEvent {@R_DoneEvent,&@R_Status}
- GetAck
- EndScope _IP6CONFIG_REGISTERDATANOTIFY_FUNC1_CASE2
- EndLog
- return
-}
-
-GetVar R_Context
-if { $R_Context == $L_Context2 } {
- set assert pass
-} else {
- set assert fail
-}
-
-RecordAssertion $assert $Ip6ConfigRegisterDataNotifyFunc1AssertionGuid005 \
- "Ip6Config.RegisterDataNotify - Event is signaled for DataType - Policy."
-
-#
-# Check Point: Call Ip6Config->SetData to set [DadXmits] and check whether the event is signaled.
-#
-SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
-SetVar R_Ip6ConfigDataSize [Sizeof EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS]
-SetVar R_Ip6ConfigDadTransmits.DupAddrDetectTransmits 3
-
-GetVar R_Context
-set L_Context1 $R_Context
-set L_Context2 [expr { $L_Context1 + 1 }]
-
-Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigDadTransmits,&@R_Status"
-GetAck
-GetVar R_Status
-
-if { $R_Status == $EFI_SUCCESS } {
- set assert pass
- RecordAssertion $assert $GenericAssertionGuid \
- "Ip6Config.SetData - Call SetData to set DadXmits." \
- "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
-} elseif { $R_Status == $EFI_NOT_READY } {
- set i 0
- set L_TimeOut 30
- while { 1 > 0 } {
- GetVar R_Context
- if { $R_Context == $L_Context2 } {
- break
- } elseif { $i == $L_TimeOut } {
- set assert fail
- RecordAssertion $assert $GenericAssertionGuid \
- "SetData failed.(event hasn't been signaled before TIMEOUT)." \
- "TIMEOUT value is $L_TimeOut (sec), "
-
- SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
- Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
- GetAck
- SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
- Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
- GetAck
- BS->CloseEvent {@R_DoneEvent,&@R_Status}
- GetAck
- EndScope _IP6CONFIG_REGISTERDATANOTIFY_FUNC1_CASE2
- EndLog
- return
- }
- incr i
- Stall 1
- }
-} else {
- set assert fail
- RecordAssertion $assert $GenericAssertionGuid \
- "Ip6Config.SetData - Call SetData to set DadXmits." \
- "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
-
- SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
- Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
- GetAck
- SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
- Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
- GetAck
- BS->CloseEvent {@R_DoneEvent,&@R_Status}
- GetAck
- EndScope _IP6CONFIG_REGISTERDATANOTIFY_FUNC1_CASE2
- EndLog
- return
-}
-
-GetVar R_Context
-if { $R_Context == $L_Context2 } {
- set assert pass
-} else {
- set assert fail
-}
-RecordAssertion $assert $Ip6ConfigRegisterDataNotifyFunc1AssertionGuid006 \
- "Ip6Config.RegisterDataNotify - Event is signaled for DataType - DadXmits."
-
-#
-# Clean up
-#
-SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
-Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
-GetAck
-set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
-RecordAssertion $assert $GenericAssertionGuid \
- "Ip6Config.UnregisterDataNotify - Unregister notification event for configuration." \
- "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
-
-SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
-Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
-GetAck
-set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
-RecordAssertion $assert $GenericAssertionGuid \
- "Ip6Config.UnregisterDataNotify - Unregister notification event for configuration." \
- "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
-
-BS->CloseEvent {@R_DoneEvent,&@R_Status}
-GetAck
-
-EndScope _IP6CONFIG_REGISTERDATANOTIFY_FUNC1_CASE2
-
+#
+# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
+# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
+#
+# This program and the accompanying materials
+# are licensed and made available under the terms and conditions of the BSD License
+# which accompanies this distribution. The full text of the license may be found at
+# http://opensource.org/licenses/bsd-license.php
+#
+# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+#
+################################################################################
+CaseLevel FUNCTION
+CaseAttribute AUTO
+CaseVerboseLevel DEFAULT
+set reportfile report.csv
+
+#
+# test case Name, category, description, GUID...
+#
+CaseGuid 886AE98A-5D43-47b4-A339-85FB089F21FA
+CaseName RegisterDataNotify.Func1.Case2
+CaseCategory IP6Config
+CaseDescription {RegisterDataNotify must succeed with valid parameters when one event registered on two data types.}
+
+################################################################################
+Include IP6Config/Include/Ip6Config.inc.tcl
+
+
+#
+# Begin log ...
+#
+BeginLog
+
+#
+# BeginScope
+#
+BeginScope _IP6CONFIG_REGISTERDATANOTIFY_FUNC1_CASE2
+
+#
+# Parameter Definition
+# R_ represents "Remote EFI Side Parameter"
+# L_ represents "Local ENTS Side Parameter"
+#
+UINTN R_Status
+UINTN R_Context
+UINTN R_DoneEvent
+UINTN R_Ip6ConfigDataSize
+UINT32 R_Ip6ConfigDataType
+EFI_IP6_CONFIG_INTERFACE_INFO R_Ip6ConfigInterfaceInfo
+EFI_IP6_CONFIG_INTERFACE_ID R_Ip6ConfigInterfaceId
+UINT32 R_Ip6ConfigPolicy
+EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS R_Ip6ConfigDadTransmits
+
+#
+# Check Point: Create Event and register it with data type [Policy] and [DadXmits]
+#
+SetVar R_Context 0
+BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context,\
+ &@R_DoneEvent, &@R_Status"
+GetAck
+set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
+RecordAssertion $assert $GenericAssertionGuid \
+ "BS.CreateEvent." \
+ "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
+
+SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
+SetVar R_Ip6ConfigDataSize [Sizeof UINT32]
+SetVar R_Ip6ConfigPolicy $IP6CP(Manual)
+
+Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
+GetAck
+set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
+RecordAssertion $assert $Ip6ConfigRegisterDataNotifyFunc1AssertionGuid003 \
+ "Ip6Config.RegisterDataNotify - Register notification event for configuration." \
+ "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
+
+SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
+SetVar R_Ip6ConfigDataSize [Sizeof EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS]
+SetVar R_Ip6ConfigDadTransmits.DupAddrDetectTransmits 3
+
+Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
+GetAck
+set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
+RecordAssertion $assert $Ip6ConfigRegisterDataNotifyFunc1AssertionGuid004 \
+ "Ip6Config.RegisterDataNotify - Register notification event for configuration." \
+ "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
+
+#
+# Check Point: Call Ip6Cofnig->SetData to set [Policy] and check whether the event is signaled.
+#
+SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
+SetVar R_Ip6ConfigDataSize [Sizeof UINT32]
+SetVar R_Ip6ConfigPolicy $IP6CP(Manual)
+
+GetVar R_Context
+set L_Context1 $R_Context
+set L_Context2 [expr { $L_Context1 + 1 }]
+
+Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_Status"
+GetAck
+GetVar R_Status
+
+if { $R_Status == $EFI_SUCCESS } {
+ set assert pass
+ RecordAssertion $assert $GenericAssertionGuid \
+ "Ip6Config.SetData - Call SetData to set manual policy." \
+ "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
+} elseif { $R_Status == $EFI_NOT_READY } {
+ set i 0
+ set L_TimeOut 30
+ while { 1 > 0 } {
+ GetVar R_Context
+ if { $R_Context == $L_Context2 } {
+ break
+ } elseif { $i == $L_TimeOut } {
+ set assert fail
+ RecordAssertion $assert $GenericAssertionGuid \
+ "SetData failed.(event hasn't been signaled before TIMEOUT)." \
+ "TIMEOUT value is $L_TimeOut (sec), "
+ SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
+ Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
+ GetAck
+ SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
+ Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
+ GetAck
+ BS->CloseEvent {@R_DoneEvent,&@R_Status}
+ GetAck
+ EndScope _IP6CONFIG_REGISTERDATANOTIFY_FUNC1_CASE2
+ EndLog
+ return
+ }
+ incr i
+ Stall 1
+ }
+} else {
+ set assert fail
+ RecordAssertion $assert $GenericAssertionGuid \
+ "Ip6Config.SetData - Call SetData to set manual policy." \
+ "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
+
+ SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
+ Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
+ GetAck
+ SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
+ Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
+ GetAck
+ BS->CloseEvent {@R_DoneEvent,&@R_Status}
+ GetAck
+ EndScope _IP6CONFIG_REGISTERDATANOTIFY_FUNC1_CASE2
+ EndLog
+ return
+}
+
+GetVar R_Context
+if { $R_Context == $L_Context2 } {
+ set assert pass
+} else {
+ set assert fail
+}
+
+RecordAssertion $assert $Ip6ConfigRegisterDataNotifyFunc1AssertionGuid005 \
+ "Ip6Config.RegisterDataNotify - Event is signaled for DataType - Policy."
+
+#
+# Check Point: Call Ip6Config->SetData to set [DadXmits] and check whether the event is signaled.
+#
+SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
+SetVar R_Ip6ConfigDataSize [Sizeof EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS]
+SetVar R_Ip6ConfigDadTransmits.DupAddrDetectTransmits 3
+
+GetVar R_Context
+set L_Context1 $R_Context
+set L_Context2 [expr { $L_Context1 + 1 }]
+
+Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigDadTransmits,&@R_Status"
+GetAck
+GetVar R_Status
+
+if { $R_Status == $EFI_SUCCESS } {
+ set assert pass
+ RecordAssertion $assert $GenericAssertionGuid \
+ "Ip6Config.SetData - Call SetData to set DadXmits." \
+ "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
+} elseif { $R_Status == $EFI_NOT_READY } {
+ set i 0
+ set L_TimeOut 30
+ while { 1 > 0 } {
+ GetVar R_Context
+ if { $R_Context == $L_Context2 } {
+ break
+ } elseif { $i == $L_TimeOut } {
+ set assert fail
+ RecordAssertion $assert $GenericAssertionGuid \
+ "SetData failed.(event hasn't been signaled before TIMEOUT)." \
+ "TIMEOUT value is $L_TimeOut (sec), "
+
+ SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
+ Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
+ GetAck
+ SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
+ Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
+ GetAck
+ BS->CloseEvent {@R_DoneEvent,&@R_Status}
+ GetAck
+ EndScope _IP6CONFIG_REGISTERDATANOTIFY_FUNC1_CASE2
+ EndLog
+ return
+ }
+ incr i
+ Stall 1
+ }
+} else {
+ set assert fail
+ RecordAssertion $assert $GenericAssertionGuid \
+ "Ip6Config.SetData - Call SetData to set DadXmits." \
+ "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
+
+ SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
+ Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
+ GetAck
+ SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
+ Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
+ GetAck
+ BS->CloseEvent {@R_DoneEvent,&@R_Status}
+ GetAck
+ EndScope _IP6CONFIG_REGISTERDATANOTIFY_FUNC1_CASE2
+ EndLog
+ return
+}
+
+GetVar R_Context
+if { $R_Context == $L_Context2 } {
+ set assert pass
+} else {
+ set assert fail
+}
+RecordAssertion $assert $Ip6ConfigRegisterDataNotifyFunc1AssertionGuid006 \
+ "Ip6Config.RegisterDataNotify - Event is signaled for DataType - DadXmits."
+
+#
+# Clean up
+#
+SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
+Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
+GetAck
+set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
+RecordAssertion $assert $GenericAssertionGuid \
+ "Ip6Config.UnregisterDataNotify - Unregister notification event for configuration." \
+ "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
+
+SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
+Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
+GetAck
+set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
+RecordAssertion $assert $GenericAssertionGuid \
+ "Ip6Config.UnregisterDataNotify - Unregister notification event for configuration." \
+ "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
+
+BS->CloseEvent {@R_DoneEvent,&@R_Status}
+GetAck
+
+EndScope _IP6CONFIG_REGISTERDATANOTIFY_FUNC1_CASE2
+
EndLog
\ No newline at end of file
diff --git a/uefi-sct/EMS/Bin/TestCase/IP6Config/SetData.Conf1.Case1.tcl b/uefi-sct/EMS/Bin/TestCase/IP6Config/SetData.Conf1.Case1.tcl
index 2213ec9..8c33521 100644
--- a/uefi-sct/EMS/Bin/TestCase/IP6Config/SetData.Conf1.Case1.tcl
+++ b/uefi-sct/EMS/Bin/TestCase/IP6Config/SetData.Conf1.Case1.tcl
@@ -1,72 +1,72 @@
-#
-# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
-# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
-#
-# This program and the accompanying materials
-# are licensed and made available under the terms and conditions of the BSD License
-# which accompanies this distribution. The full text of the license may be found at
-# http://opensource.org/licenses/bsd-license.php
-#
-# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
-# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-#
-################################################################################
-CaseLevel CONFORMANCE
-CaseAttribute AUTO
-CaseVerboseLevel DEFAULT
-set reportfile report.csv
-
-#
-# test case Name, category, description, GUID...
-#
-CaseGuid EF4CCB73-577C-4b8c-96E3-91517F0B7056
-CaseName SetData.Conf1.Case1
-CaseCategory IP6Config
-CaseDescription {SetData must not succeed when data is NULL.}
-
-################################################################################
-Include IP6Config/Include/Ip6Config.inc.tcl
-
-
-#
-# Begin log ...
-#
-BeginLog
-
-#
-# BeginScope
-#
-BeginScope _IP6CONFIG_SETDATA_CONF1
-
-#
-# Parameter Definition
-# R_ represents "Remote EFI Side Parameter"
-# L_ represents "Local ENTS Side Parameter"
-#
-UINTN R_Status
-UINTN R_Context
-UINTN R_DoneEvent
-UINTN R_Ip6ConfigDataSize
-UINT32 R_Ip6ConfigDataType
-EFI_IP6_CONFIG_INTERFACE_INFO R_Ip6ConfigInterfaceInfo
-EFI_IP6_CONFIG_INTERFACE_ID R_Ip6ConfigInterfaceId
-UINT32 R_Ip6ConfigPolicy
-EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS R_Ip6ConfigDadTransmits
-EFI_IP6_CONFIG_MANUAL_ADDRESS R_Ip6ConfigManualAddress
-
-#
-# Check Point: Call Ip6Config->SetData with data is NULL.
-#
-SetVar R_Ip6ConfigDataType $IP6CDT(InterfaceInfo)
-SetVar R_Ip6ConfigDataSize [Sizeof EFI_IP6_CONFIG_INTERFACE_INFO]
-
-Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,NULL,&@R_Status"
-GetAck
-set assert [VerifyReturnStatus R_Status $EFI_INVALID_PARAMETER]
-RecordAssertion $assert $Ip6ConfigSetDataConf1AssertionGuid001 \
- "Ip6Config.SetData - Call SetData with Data NULL." \
- "ReturnStatus - $R_Status, ExpectedStatus - $EFI_INVALID_PARAMETER"
-
-EndScope _IP6CONFIG_SETDATA_CONF1
-
+#
+# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
+# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
+#
+# This program and the accompanying materials
+# are licensed and made available under the terms and conditions of the BSD License
+# which accompanies this distribution. The full text of the license may be found at
+# http://opensource.org/licenses/bsd-license.php
+#
+# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+#
+################################################################################
+CaseLevel CONFORMANCE
+CaseAttribute AUTO
+CaseVerboseLevel DEFAULT
+set reportfile report.csv
+
+#
+# test case Name, category, description, GUID...
+#
+CaseGuid EF4CCB73-577C-4b8c-96E3-91517F0B7056
+CaseName SetData.Conf1.Case1
+CaseCategory IP6Config
+CaseDescription {SetData must not succeed when data is NULL.}
+
+################################################################################
+Include IP6Config/Include/Ip6Config.inc.tcl
+
+
+#
+# Begin log ...
+#
+BeginLog
+
+#
+# BeginScope
+#
+BeginScope _IP6CONFIG_SETDATA_CONF1
+
+#
+# Parameter Definition
+# R_ represents "Remote EFI Side Parameter"
+# L_ represents "Local ENTS Side Parameter"
+#
+UINTN R_Status
+UINTN R_Context
+UINTN R_DoneEvent
+UINTN R_Ip6ConfigDataSize
+UINT32 R_Ip6ConfigDataType
+EFI_IP6_CONFIG_INTERFACE_INFO R_Ip6ConfigInterfaceInfo
+EFI_IP6_CONFIG_INTERFACE_ID R_Ip6ConfigInterfaceId
+UINT32 R_Ip6ConfigPolicy
+EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS R_Ip6ConfigDadTransmits
+EFI_IP6_CONFIG_MANUAL_ADDRESS R_Ip6ConfigManualAddress
+
+#
+# Check Point: Call Ip6Config->SetData with data is NULL.
+#
+SetVar R_Ip6ConfigDataType $IP6CDT(InterfaceInfo)
+SetVar R_Ip6ConfigDataSize [Sizeof EFI_IP6_CONFIG_INTERFACE_INFO]
+
+Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,NULL,&@R_Status"
+GetAck
+set assert [VerifyReturnStatus R_Status $EFI_INVALID_PARAMETER]
+RecordAssertion $assert $Ip6ConfigSetDataConf1AssertionGuid001 \
+ "Ip6Config.SetData - Call SetData with Data NULL." \
+ "ReturnStatus - $R_Status, ExpectedStatus - $EFI_INVALID_PARAMETER"
+
+EndScope _IP6CONFIG_SETDATA_CONF1
+
EndLog
\ No newline at end of file
diff --git a/uefi-sct/EMS/Bin/TestCase/IP6Config/SetData.Conf2.Case1.tcl b/uefi-sct/EMS/Bin/TestCase/IP6Config/SetData.Conf2.Case1.tcl
index f14a5bb..bbf7830 100644
--- a/uefi-sct/EMS/Bin/TestCase/IP6Config/SetData.Conf2.Case1.tcl
+++ b/uefi-sct/EMS/Bin/TestCase/IP6Config/SetData.Conf2.Case1.tcl
@@ -1,299 +1,299 @@
-#
-# Copyright 2006 - 2017 Unified EFI, Inc.<BR>
-# Copyright (c) 2010 - 2017, Intel Corporation. All rights reserved.<BR>
-#
-# This program and the accompanying materials
-# are licensed and made available under the terms and conditions of the BSD License
-# which accompanies this distribution. The full text of the license may be found at
-# http://opensource.org/licenses/bsd-license.php
-#
-# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
-# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-#
-################################################################################
-CaseLevel CONFORMANCE
-CaseAttribute AUTO
-CaseVerboseLevel DEFAULT
-set reportfile report.csv
-
-#
-# test case Name, category, description, GUID...
-#
-CaseGuid A9BBCC37-3ED5-4c11-B6B6-BE52A1131568
-CaseName SetData.Conf2.Case1
-CaseCategory IP6Config
-CaseDescription {SetData must not succeed when one or more fields in data is invalid.}
-
-################################################################################
-Include IP6Config/Include/Ip6Config.inc.tcl
-
-
-#
-# Begin log ...
-#
-BeginLog
-
-#
-# BeginScope
-#
-BeginScope _IP6CONFIG_SETDATA_CONF2
-
-#
-# Parameter Definition
-# R_ represents "Remote EFI Side Parameter"
-# L_ represents "Local ENTS Side Parameter"
-#
-UINTN R_Status
-UINTN R_Context
-UINTN R_DoneEvent
-UINTN R_Ip6ConfigDataSize
-UINT32 R_Ip6ConfigDataType
-EFI_IP6_CONFIG_INTERFACE_INFO R_Ip6ConfigInterfaceInfo
-EFI_IP6_CONFIG_INTERFACE_ID R_Ip6ConfigInterfaceId
-UINT32 R_Ip6ConfigPolicy
-EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS R_Ip6ConfigDadTransmits
-
-#
-# Check Point: Call Ip6Config->SetData to set manual policy
-#
-SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
-SetVar R_Ip6ConfigDataSize [Sizeof UINT32]
-SetVar R_Ip6ConfigPolicy $IP6CP(Manual)
-
-SetVar R_Context 0
-BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context,\
- &@R_DoneEvent, &@R_Status"
-GetAck
-set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
-RecordAssertion $assert $GenericAssertionGuid \
- "BS.CreateEvent." \
- "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
-
-Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
-GetAck
-set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
-RecordAssertion $assert $GenericAssertionGuid \
- "Ip6Config.RegisterDataNotify - Register notification event for configuration." \
- "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
-
-Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_Status"
-GetAck
-GetVar R_Status
-if { $R_Status == $EFI_SUCCESS } {
- set assert pass
- RecordAssertion $assert $GenericAssertionGuid \
- "Ip6Config.SetData - Call SetData to set manual policy." \
- "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
-} elseif { $R_Status == $EFI_NOT_READY } {
- set i 0
- set L_TimeOut 30
- while { 1 > 0 } {
- GetVar R_Context
- if { $R_Context == 1 } {
- break
- } elseif { $i == $L_TimeOut } {
- set assert fail
- RecordAssertion $assert $GenericAssertionGuid \
- "SetData failed.(event hasn't been signaled before TIMEOUT)." \
- "TIMEOUT value is $L_TimeOut (sec), "
- SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
- Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
- GetAck
- BS->CloseEvent {@R_DoneEvent,&@R_Status}
- GetAck
- EndScope _IP6CONFIG_SETDATA_CONF2
- EndLog
- return
- }
- incr i
- Stall 1
- }
-} else {
- set assert fail
- RecordAssertion $assert $GenericAssertionGuid \
- "Ip6Config.SetData - Call SetData to set manual policy." \
- "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
-
- SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
- Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
- GetAck
- BS->CloseEvent {@R_DoneEvent,&@R_Status}
- GetAck
- EndScope _IP6CONFIG_SETDATA_CONF2
- EndLog
- return
-}
-
-Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_Status"
-GetAck
-set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
-RecordAssertion $assert $GenericAssertionGuid \
- "Ip6Config.GetData - Call GetData to get policy value." \
- "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
-GetVar R_Ip6ConfigPolicy
-if { $R_Ip6ConfigPolicy == $IP6CP(Manual) } {
- set assert pass
-} else {
- set assert fail
-
- RecordAssertion $assert $GenericAssertionGuid \
- "Set manual policy succeeds(event is signaled correctly and data correct)."
- SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
- Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
- GetAck
- BS->CloseEvent {@R_DoneEvent,&@R_Status}
- GetAck
- EndScope _IP6CONFIG_SETDATA_CONF2
- EndLog
- return
-}
-RecordAssertion $assert $GenericAssertionGuid \
- "Set manual policy succeeds(event is signaled correctly and data correct)."
-
-#
-# Check Point : Set Manual Address with "::"
-#
-EFI_IP6_CONFIG_MANUAL_ADDRESS R_Temp_Ip6ConfigManualAddress
-
-set L_ManualListLen 1
-EFI_IP6_CONFIG_MANUAL_ADDRESS R_Ip6ConfigManualAddress
-set L_UnitLen [Sizeof EFI_IP6_CONFIG_MANUAL_ADDRESS]
-set L_ListLen [expr {$L_UnitLen * $L_ManualListLen}]
-SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
-SetVar R_Ip6ConfigDataSize $L_ListLen
-SetVar R_Temp_Ip6ConfigManualAddress.IsAnycast FALSE
-SetVar R_Temp_Ip6ConfigManualAddress.PrefixLength 64
-SetIpv6Address R_Temp_Ip6ConfigManualAddress.Address "::"
-SetVar R_Ip6ConfigManualAddress @R_Temp_Ip6ConfigManualAddress
-
-Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigManualAddress,&@R_Status"
-GetAck
-set assert [VerifyReturnStatus R_Status $EFI_INVALID_PARAMETER]
-RecordAssertion $assert $Ip6ConfigSetDataConf2AssertionGuid001 \
- "Ip6Config.SetData - Call SetData to set manual address (Not Unicast or Linklocal)." \
- "ReturnStatus - $R_Status, ExpectedStatus - $EFI_INVALID_PARAMETER"
-
-DelVar R_Ip6ConfigManualAddress
-
-#
-# Check Point : Set Manual Address with duplication of list entries
-#
-set L_ManualListLen 3
-EFI_IP6_CONFIG_MANUAL_ADDRESS R_Ip6ConfigManualAddress($L_ManualListLen)
-set L_UnitLen [Sizeof EFI_IP6_CONFIG_MANUAL_ADDRESS]
-set L_ListLen [expr {$L_UnitLen * $L_ManualListLen}]
-SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
-SetVar R_Ip6ConfigDataSize $L_ListLen
-
-SetVar R_Temp_Ip6ConfigManualAddress.IsAnycast FALSE
-SetVar R_Temp_Ip6ConfigManualAddress.PrefixLength 64
-SetIpv6Address R_Temp_Ip6ConfigManualAddress.Address "2002::5000"
-SetVar R_Ip6ConfigManualAddress(0) @R_Temp_Ip6ConfigManualAddress
-
-SetVar R_Temp_Ip6ConfigManualAddress.IsAnycast FALSE
-SetVar R_Temp_Ip6ConfigManualAddress.PrefixLength 64
-SetIpv6Address R_Temp_Ip6ConfigManualAddress.Address "2002::5001"
-SetVar R_Ip6ConfigManualAddress(1) @R_Temp_Ip6ConfigManualAddress
-
-SetVar R_Temp_Ip6ConfigManualAddress.IsAnycast FALSE
-SetVar R_Temp_Ip6ConfigManualAddress.PrefixLength 64
-SetIpv6Address R_Temp_Ip6ConfigManualAddress.Address "2002::5000"
-SetVar R_Ip6ConfigManualAddress(2) @R_Temp_Ip6ConfigManualAddress
-
-Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigManualAddress,&@R_Status"
-GetAck
-set assert [VerifyReturnStatus R_Status $EFI_INVALID_PARAMETER]
-RecordAssertion $assert $Ip6ConfigSetDataConf2AssertionGuid002 \
- "Ip6Config.SetData - Call SetData to set manual address (duplication of list entries)." \
- "ReturnStatus - $R_Status, ExpectedStatus - $EFI_INVALID_PARAMETER"
-
-DelVar R_Ip6ConfigManualAddress
-
-#
-# Check Points : Set Gateway with "ff02::1" (multicast address)
-#
-set L_GatewayListLen 1
-EFI_IPv6_ADDRESS R_Temp_Ip6ConfigGateway
-EFI_IPv6_ADDRESS R_Ip6ConfigGateway
-set L_UnitLen [Sizeof EFI_IPv6_ADDRESS]
-set L_ListLen [expr {$L_UnitLen * $L_GatewayListLen}]
-SetVar R_Ip6ConfigDataType $IP6CDT(Gateway)
-SetVar R_Ip6ConfigDataSize $L_ListLen
-
-SetIpv6Address R_Temp_Ip6ConfigGateway "ff02::1"
-SetVar R_Ip6ConfigGateway @R_Temp_Ip6ConfigGateway
-Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigGateway,&@R_Status"
-GetAck
-set assert [VerifyReturnStatus R_Status $EFI_INVALID_PARAMETER]
-RecordAssertion $assert $Ip6ConfigSetDataConf2AssertionGuid003 \
- "Ip6Config.SetData - Call SetData to set gateway with multicast address." \
- "ReturnStatus - $R_Status, ExpectedStatus - $EFI_INVALID_PARAMETER"
-
-DelVar R_Ip6ConfigGateway
-
-#
-# Check Point : Set Gateway with duplication of list entries
-#
-set L_GatewayListLen 3
-EFI_IPv6_ADDRESS R_Ip6ConfigGateway($L_GatewayListLen)
-set L_UnitLen [Sizeof EFI_IPv6_ADDRESS]
-set L_ListLen [expr {$L_UnitLen * $L_GatewayListLen}]
-SetVar R_Ip6ConfigDataType $IP6CDT(Gateway)
-SetVar R_Ip6ConfigDataSize $L_ListLen
-
-SetIpv6Address R_Temp_Ip6ConfigGateway "2002::5000"
-SetVar R_Ip6ConfigGateway(0) @R_Temp_Ip6ConfigGateway
-SetIpv6Address R_Temp_Ip6ConfigGateway "2002::5001"
-SetVar R_Ip6ConfigGateway(1) @R_Temp_Ip6ConfigGateway
-SetIpv6Address R_Temp_Ip6ConfigGateway "2002::5000"
-SetVar R_Ip6ConfigGateway(2) @R_Temp_Ip6ConfigGateway
-
-Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigGateway,&@R_Status"
-GetAck
-set assert [VerifyReturnStatus R_Status $EFI_INVALID_PARAMETER]
-RecordAssertion $assert $Ip6ConfigSetDataConf2AssertionGuid004 \
- "Ip6Config.SetData - Call SetData to set gateway with duplication of list entries." \
- "ReturnStatus - $R_Status, ExpectedStatus - $EFI_INVALID_PARAMETER"
-
-DelVar R_Ip6ConfigGateway
-
-#
-# Check Point : Set Dns Server with "ff02::1" (link local address)
-#
-set L_DnsServerListLen 1
-EFI_IPv6_ADDRESS R_Temp_Ip6ConfigDnsServer
-EFI_IPv6_ADDRESS R_Ip6ConfigDnsServer
-set L_UnitLen [Sizeof EFI_IPv6_ADDRESS]
-set L_ListLen [expr {$L_UnitLen * $L_DnsServerListLen}]
-SetVar R_Ip6ConfigDataType $IP6CDT(DnsServer)
-SetVar R_Ip6ConfigDataSize $L_ListLen
-
-SetIpv6Address R_Temp_Ip6ConfigDnsServer "ff02::1"
-SetVar R_Ip6ConfigDnsServer @R_Temp_Ip6ConfigDnsServer
-
-Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigDnsServer,&@R_Status"
-GetAck
-set assert [VerifyReturnStatus R_Status $EFI_INVALID_PARAMETER]
-RecordAssertion $assert $Ip6ConfigSetDataConf2AssertionGuid005 \
- "Ip6Config.SetData - Call SetData to set dns server with multicast address." \
- "ReturnStatus - $R_Status, ExpectedStatus - $EFI_INVALID_PARAMETER"
-
-DelVar R_Ip6ConfigDnsServer
-
-#
-# Clean up
-#
-SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
-Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
-GetAck
-set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
-RecordAssertion $assert $GenericAssertionGuid \
- "Ip6Config.UnregisterDataNotify - Unregister notification event for configuration." \
- "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
-
-BS->CloseEvent {@R_DoneEvent,&@R_Status}
-GetAck
-
-EndScope _IP6CONFIG_SETDATA_CONF2
-
+#
+# Copyright 2006 - 2017 Unified EFI, Inc.<BR>
+# Copyright (c) 2010 - 2017, Intel Corporation. All rights reserved.<BR>
+#
+# This program and the accompanying materials
+# are licensed and made available under the terms and conditions of the BSD License
+# which accompanies this distribution. The full text of the license may be found at
+# http://opensource.org/licenses/bsd-license.php
+#
+# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+#
+################################################################################
+CaseLevel CONFORMANCE
+CaseAttribute AUTO
+CaseVerboseLevel DEFAULT
+set reportfile report.csv
+
+#
+# test case Name, category, description, GUID...
+#
+CaseGuid A9BBCC37-3ED5-4c11-B6B6-BE52A1131568
+CaseName SetData.Conf2.Case1
+CaseCategory IP6Config
+CaseDescription {SetData must not succeed when one or more fields in data is invalid.}
+
+################################################################################
+Include IP6Config/Include/Ip6Config.inc.tcl
+
+
+#
+# Begin log ...
+#
+BeginLog
+
+#
+# BeginScope
+#
+BeginScope _IP6CONFIG_SETDATA_CONF2
+
+#
+# Parameter Definition
+# R_ represents "Remote EFI Side Parameter"
+# L_ represents "Local ENTS Side Parameter"
+#
+UINTN R_Status
+UINTN R_Context
+UINTN R_DoneEvent
+UINTN R_Ip6ConfigDataSize
+UINT32 R_Ip6ConfigDataType
+EFI_IP6_CONFIG_INTERFACE_INFO R_Ip6ConfigInterfaceInfo
+EFI_IP6_CONFIG_INTERFACE_ID R_Ip6ConfigInterfaceId
+UINT32 R_Ip6ConfigPolicy
+EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS R_Ip6ConfigDadTransmits
+
+#
+# Check Point: Call Ip6Config->SetData to set manual policy
+#
+SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
+SetVar R_Ip6ConfigDataSize [Sizeof UINT32]
+SetVar R_Ip6ConfigPolicy $IP6CP(Manual)
+
+SetVar R_Context 0
+BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context,\
+ &@R_DoneEvent, &@R_Status"
+GetAck
+set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
+RecordAssertion $assert $GenericAssertionGuid \
+ "BS.CreateEvent." \
+ "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
+
+Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
+GetAck
+set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
+RecordAssertion $assert $GenericAssertionGuid \
+ "Ip6Config.RegisterDataNotify - Register notification event for configuration." \
+ "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
+
+Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_Status"
+GetAck
+GetVar R_Status
+if { $R_Status == $EFI_SUCCESS } {
+ set assert pass
+ RecordAssertion $assert $GenericAssertionGuid \
+ "Ip6Config.SetData - Call SetData to set manual policy." \
+ "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
+} elseif { $R_Status == $EFI_NOT_READY } {
+ set i 0
+ set L_TimeOut 30
+ while { 1 > 0 } {
+ GetVar R_Context
+ if { $R_Context == 1 } {
+ break
+ } elseif { $i == $L_TimeOut } {
+ set assert fail
+ RecordAssertion $assert $GenericAssertionGuid \
+ "SetData failed.(event hasn't been signaled before TIMEOUT)." \
+ "TIMEOUT value is $L_TimeOut (sec), "
+ SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
+ Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
+ GetAck
+ BS->CloseEvent {@R_DoneEvent,&@R_Status}
+ GetAck
+ EndScope _IP6CONFIG_SETDATA_CONF2
+ EndLog
+ return
+ }
+ incr i
+ Stall 1
+ }
+} else {
+ set assert fail
+ RecordAssertion $assert $GenericAssertionGuid \
+ "Ip6Config.SetData - Call SetData to set manual policy." \
+ "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
+
+ SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
+ Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
+ GetAck
+ BS->CloseEvent {@R_DoneEvent,&@R_Status}
+ GetAck
+ EndScope _IP6CONFIG_SETDATA_CONF2
+ EndLog
+ return
+}
+
+Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_Status"
+GetAck
+set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
+RecordAssertion $assert $GenericAssertionGuid \
+ "Ip6Config.GetData - Call GetData to get policy value." \
+ "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
+GetVar R_Ip6ConfigPolicy
+if { $R_Ip6ConfigPolicy == $IP6CP(Manual) } {
+ set assert pass
+} else {
+ set assert fail
+
+ RecordAssertion $assert $GenericAssertionGuid \
+ "Set manual policy succeeds(event is signaled correctly and data correct)."
+ SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
+ Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
+ GetAck
+ BS->CloseEvent {@R_DoneEvent,&@R_Status}
+ GetAck
+ EndScope _IP6CONFIG_SETDATA_CONF2
+ EndLog
+ return
+}
+RecordAssertion $assert $GenericAssertionGuid \
+ "Set manual policy succeeds(event is signaled correctly and data correct)."
+
+#
+# Check Point : Set Manual Address with "::"
+#
+EFI_IP6_CONFIG_MANUAL_ADDRESS R_Temp_Ip6ConfigManualAddress
+
+set L_ManualListLen 1
+EFI_IP6_CONFIG_MANUAL_ADDRESS R_Ip6ConfigManualAddress
+set L_UnitLen [Sizeof EFI_IP6_CONFIG_MANUAL_ADDRESS]
+set L_ListLen [expr {$L_UnitLen * $L_ManualListLen}]
+SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
+SetVar R_Ip6ConfigDataSize $L_ListLen
+SetVar R_Temp_Ip6ConfigManualAddress.IsAnycast FALSE
+SetVar R_Temp_Ip6ConfigManualAddress.PrefixLength 64
+SetIpv6Address R_Temp_Ip6ConfigManualAddress.Address "::"
+SetVar R_Ip6ConfigManualAddress @R_Temp_Ip6ConfigManualAddress
+
+Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigManualAddress,&@R_Status"
+GetAck
+set assert [VerifyReturnStatus R_Status $EFI_INVALID_PARAMETER]
+RecordAssertion $assert $Ip6ConfigSetDataConf2AssertionGuid001 \
+ "Ip6Config.SetData - Call SetData to set manual address (Not Unicast or Linklocal)." \
+ "ReturnStatus - $R_Status, ExpectedStatus - $EFI_INVALID_PARAMETER"
+
+DelVar R_Ip6ConfigManualAddress
+
+#
+# Check Point : Set Manual Address with duplication of list entries
+#
+set L_ManualListLen 3
+EFI_IP6_CONFIG_MANUAL_ADDRESS R_Ip6ConfigManualAddress($L_ManualListLen)
+set L_UnitLen [Sizeof EFI_IP6_CONFIG_MANUAL_ADDRESS]
+set L_ListLen [expr {$L_UnitLen * $L_ManualListLen}]
+SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
+SetVar R_Ip6ConfigDataSize $L_ListLen
+
+SetVar R_Temp_Ip6ConfigManualAddress.IsAnycast FALSE
+SetVar R_Temp_Ip6ConfigManualAddress.PrefixLength 64
+SetIpv6Address R_Temp_Ip6ConfigManualAddress.Address "2002::5000"
+SetVar R_Ip6ConfigManualAddress(0) @R_Temp_Ip6ConfigManualAddress
+
+SetVar R_Temp_Ip6ConfigManualAddress.IsAnycast FALSE
+SetVar R_Temp_Ip6ConfigManualAddress.PrefixLength 64
+SetIpv6Address R_Temp_Ip6ConfigManualAddress.Address "2002::5001"
+SetVar R_Ip6ConfigManualAddress(1) @R_Temp_Ip6ConfigManualAddress
+
+SetVar R_Temp_Ip6ConfigManualAddress.IsAnycast FALSE
+SetVar R_Temp_Ip6ConfigManualAddress.PrefixLength 64
+SetIpv6Address R_Temp_Ip6ConfigManualAddress.Address "2002::5000"
+SetVar R_Ip6ConfigManualAddress(2) @R_Temp_Ip6ConfigManualAddress
+
+Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigManualAddress,&@R_Status"
+GetAck
+set assert [VerifyReturnStatus R_Status $EFI_INVALID_PARAMETER]
+RecordAssertion $assert $Ip6ConfigSetDataConf2AssertionGuid002 \
+ "Ip6Config.SetData - Call SetData to set manual address (duplication of list entries)." \
+ "ReturnStatus - $R_Status, ExpectedStatus - $EFI_INVALID_PARAMETER"
+
+DelVar R_Ip6ConfigManualAddress
+
+#
+# Check Points : Set Gateway with "ff02::1" (multicast address)
+#
+set L_GatewayListLen 1
+EFI_IPv6_ADDRESS R_Temp_Ip6ConfigGateway
+EFI_IPv6_ADDRESS R_Ip6ConfigGateway
+set L_UnitLen [Sizeof EFI_IPv6_ADDRESS]
+set L_ListLen [expr {$L_UnitLen * $L_GatewayListLen}]
+SetVar R_Ip6ConfigDataType $IP6CDT(Gateway)
+SetVar R_Ip6ConfigDataSize $L_ListLen
+
+SetIpv6Address R_Temp_Ip6ConfigGateway "ff02::1"
+SetVar R_Ip6ConfigGateway @R_Temp_Ip6ConfigGateway
+Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigGateway,&@R_Status"
+GetAck
+set assert [VerifyReturnStatus R_Status $EFI_INVALID_PARAMETER]
+RecordAssertion $assert $Ip6ConfigSetDataConf2AssertionGuid003 \
+ "Ip6Config.SetData - Call SetData to set gateway with multicast address." \
+ "ReturnStatus - $R_Status, ExpectedStatus - $EFI_INVALID_PARAMETER"
+
+DelVar R_Ip6ConfigGateway
+
+#
+# Check Point : Set Gateway with duplication of list entries
+#
+set L_GatewayListLen 3
+EFI_IPv6_ADDRESS R_Ip6ConfigGateway($L_GatewayListLen)
+set L_UnitLen [Sizeof EFI_IPv6_ADDRESS]
+set L_ListLen [expr {$L_UnitLen * $L_GatewayListLen}]
+SetVar R_Ip6ConfigDataType $IP6CDT(Gateway)
+SetVar R_Ip6ConfigDataSize $L_ListLen
+
+SetIpv6Address R_Temp_Ip6ConfigGateway "2002::5000"
+SetVar R_Ip6ConfigGateway(0) @R_Temp_Ip6ConfigGateway
+SetIpv6Address R_Temp_Ip6ConfigGateway "2002::5001"
+SetVar R_Ip6ConfigGateway(1) @R_Temp_Ip6ConfigGateway
+SetIpv6Address R_Temp_Ip6ConfigGateway "2002::5000"
+SetVar R_Ip6ConfigGateway(2) @R_Temp_Ip6ConfigGateway
+
+Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigGateway,&@R_Status"
+GetAck
+set assert [VerifyReturnStatus R_Status $EFI_INVALID_PARAMETER]
+RecordAssertion $assert $Ip6ConfigSetDataConf2AssertionGuid004 \
+ "Ip6Config.SetData - Call SetData to set gateway with duplication of list entries." \
+ "ReturnStatus - $R_Status, ExpectedStatus - $EFI_INVALID_PARAMETER"
+
+DelVar R_Ip6ConfigGateway
+
+#
+# Check Point : Set Dns Server with "ff02::1" (link local address)
+#
+set L_DnsServerListLen 1
+EFI_IPv6_ADDRESS R_Temp_Ip6ConfigDnsServer
+EFI_IPv6_ADDRESS R_Ip6ConfigDnsServer
+set L_UnitLen [Sizeof EFI_IPv6_ADDRESS]
+set L_ListLen [expr {$L_UnitLen * $L_DnsServerListLen}]
+SetVar R_Ip6ConfigDataType $IP6CDT(DnsServer)
+SetVar R_Ip6ConfigDataSize $L_ListLen
+
+SetIpv6Address R_Temp_Ip6ConfigDnsServer "ff02::1"
+SetVar R_Ip6ConfigDnsServer @R_Temp_Ip6ConfigDnsServer
+
+Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigDnsServer,&@R_Status"
+GetAck
+set assert [VerifyReturnStatus R_Status $EFI_INVALID_PARAMETER]
+RecordAssertion $assert $Ip6ConfigSetDataConf2AssertionGuid005 \
+ "Ip6Config.SetData - Call SetData to set dns server with multicast address." \
+ "ReturnStatus - $R_Status, ExpectedStatus - $EFI_INVALID_PARAMETER"
+
+DelVar R_Ip6ConfigDnsServer
+
+#
+# Clean up
+#
+SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
+Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
+GetAck
+set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
+RecordAssertion $assert $GenericAssertionGuid \
+ "Ip6Config.UnregisterDataNotify - Unregister notification event for configuration." \
+ "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
+
+BS->CloseEvent {@R_DoneEvent,&@R_Status}
+GetAck
+
+EndScope _IP6CONFIG_SETDATA_CONF2
+
EndLog
\ No newline at end of file
diff --git a/uefi-sct/EMS/Bin/TestCase/IP6Config/SetData.Conf3.Case1.tcl b/uefi-sct/EMS/Bin/TestCase/IP6Config/SetData.Conf3.Case1.tcl
index 84a13c6..1cfc489 100644
--- a/uefi-sct/EMS/Bin/TestCase/IP6Config/SetData.Conf3.Case1.tcl
+++ b/uefi-sct/EMS/Bin/TestCase/IP6Config/SetData.Conf3.Case1.tcl
@@ -1,72 +1,72 @@
-#
-# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
-# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
-#
-# This program and the accompanying materials
-# are licensed and made available under the terms and conditions of the BSD License
-# which accompanies this distribution. The full text of the license may be found at
-# http://opensource.org/licenses/bsd-license.php
-#
-# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
-# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-#
-################################################################################
-CaseLevel CONFORMANCE
-CaseAttribute AUTO
-CaseVerboseLevel DEFAULT
-set reportfile report.csv
-
-#
-# test case Name, category, description, GUID...
-#
-CaseGuid 2FCE7A2D-09F4-4c8e-97CD-68A0045E34B8
-CaseName SetData.Conf3.Case1
-CaseCategory IP6Config
-CaseDescription {SetData must not succeed when data is read-only type.}
-
-################################################################################
-Include IP6Config/Include/Ip6Config.inc.tcl
-
-
-#
-# Begin log ...
-#
-BeginLog
-
-#
-# BeginScope
-#
-BeginScope _IP6CONFIG_SETDATA_CONF3
-
-#
-# Parameter Definition
-# R_ represents "Remote EFI Side Parameter"
-# L_ represents "Local ENTS Side Parameter"
-#
-UINTN R_Status
-UINTN R_Context
-UINTN R_DoneEvent
-UINTN R_Ip6ConfigDataSize
-UINT32 R_Ip6ConfigDataType
-EFI_IP6_CONFIG_INTERFACE_INFO R_Ip6ConfigInterfaceInfo
-EFI_IP6_CONFIG_INTERFACE_ID R_Ip6ConfigInterfaceId
-UINT32 R_Ip6ConfigPolicy
-EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS R_Ip6ConfigDadTransmits
-EFI_IP6_CONFIG_MANUAL_ADDRESS R_Ip6ConfigManualAddress
-
-#
-# Check Point: Call Ip6Config->SetData with data is read only.
-#
-SetVar R_Ip6ConfigDataType $IP6CDT(InterfaceInfo)
-SetVar R_Ip6ConfigDataSize [Sizeof EFI_IP6_CONFIG_INTERFACE_INFO]
-
-Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigInterfaceInfo,&@R_Status"
-GetAck
-set assert [VerifyReturnStatus R_Status $EFI_WRITE_PROTECTED]
-RecordAssertion $assert $Ip6ConfigSetDataConf3AssertionGuid001 \
- "Ip6Config.SetData - Call SetData with data is read only." \
- "ReturnStatus - $R_Status, ExpectedStatus - $EFI_WRITE_PROTECTED"
-
-EndScope _IP6CONFIG_SETDATA_CONF3
-
+#
+# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
+# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
+#
+# This program and the accompanying materials
+# are licensed and made available under the terms and conditions of the BSD License
+# which accompanies this distribution. The full text of the license may be found at
+# http://opensource.org/licenses/bsd-license.php
+#
+# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+#
+################################################################################
+CaseLevel CONFORMANCE
+CaseAttribute AUTO
+CaseVerboseLevel DEFAULT
+set reportfile report.csv
+
+#
+# test case Name, category, description, GUID...
+#
+CaseGuid 2FCE7A2D-09F4-4c8e-97CD-68A0045E34B8
+CaseName SetData.Conf3.Case1
+CaseCategory IP6Config
+CaseDescription {SetData must not succeed when data is read-only type.}
+
+################################################################################
+Include IP6Config/Include/Ip6Config.inc.tcl
+
+
+#
+# Begin log ...
+#
+BeginLog
+
+#
+# BeginScope
+#
+BeginScope _IP6CONFIG_SETDATA_CONF3
+
+#
+# Parameter Definition
+# R_ represents "Remote EFI Side Parameter"
+# L_ represents "Local ENTS Side Parameter"
+#
+UINTN R_Status
+UINTN R_Context
+UINTN R_DoneEvent
+UINTN R_Ip6ConfigDataSize
+UINT32 R_Ip6ConfigDataType
+EFI_IP6_CONFIG_INTERFACE_INFO R_Ip6ConfigInterfaceInfo
+EFI_IP6_CONFIG_INTERFACE_ID R_Ip6ConfigInterfaceId
+UINT32 R_Ip6ConfigPolicy
+EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS R_Ip6ConfigDadTransmits
+EFI_IP6_CONFIG_MANUAL_ADDRESS R_Ip6ConfigManualAddress
+
+#
+# Check Point: Call Ip6Config->SetData with data is read only.
+#
+SetVar R_Ip6ConfigDataType $IP6CDT(InterfaceInfo)
+SetVar R_Ip6ConfigDataSize [Sizeof EFI_IP6_CONFIG_INTERFACE_INFO]
+
+Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigInterfaceInfo,&@R_Status"
+GetAck
+set assert [VerifyReturnStatus R_Status $EFI_WRITE_PROTECTED]
+RecordAssertion $assert $Ip6ConfigSetDataConf3AssertionGuid001 \
+ "Ip6Config.SetData - Call SetData with data is read only." \
+ "ReturnStatus - $R_Status, ExpectedStatus - $EFI_WRITE_PROTECTED"
+
+EndScope _IP6CONFIG_SETDATA_CONF3
+
EndLog
\ No newline at end of file
diff --git a/uefi-sct/EMS/Bin/TestCase/IP6Config/SetData.Conf4.Case1.tcl b/uefi-sct/EMS/Bin/TestCase/IP6Config/SetData.Conf4.Case1.tcl
index 04235cc..597fdac 100644
--- a/uefi-sct/EMS/Bin/TestCase/IP6Config/SetData.Conf4.Case1.tcl
+++ b/uefi-sct/EMS/Bin/TestCase/IP6Config/SetData.Conf4.Case1.tcl
@@ -1,238 +1,238 @@
-#
-# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
-# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
-#
-# This program and the accompanying materials
-# are licensed and made available under the terms and conditions of the BSD License
-# which accompanies this distribution. The full text of the license may be found at
-# http://opensource.org/licenses/bsd-license.php
-#
-# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
-# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-#
-################################################################################
-CaseLevel CONFORMANCE
-CaseAttribute AUTO
-CaseVerboseLevel DEFAULT
-set reportfile report.csv
-
-#
-# test case Name, category, description, GUID...
-#
-CaseGuid D0A2D271-0BBF-4092-A61E-96FB23208DE0
-CaseName SetData.Conf4.Case1
-CaseCategory IP6Config
-CaseDescription {SetData must not succeed when data is not configurable in current policy.}
-
-################################################################################
-Include IP6Config/Include/Ip6Config.inc.tcl
-
-
-#
-# Begin log ...
-#
-BeginLog
-
-#
-# BeginScope
-#
-BeginScope _IP6CONFIG_SETDATA_CONF4
-
-#
-# Parameter Definition
-# R_ represents "Remote EFI Side Parameter"
-# L_ represents "Local ENTS Side Parameter"
-#
-UINTN R_Status
-UINTN R_Context
-UINTN R_DoneEvent
-UINTN R_Ip6ConfigDataSize
-UINT32 R_Ip6ConfigDataType
-EFI_IP6_CONFIG_INTERFACE_INFO R_Ip6ConfigInterfaceInfo
-EFI_IP6_CONFIG_INTERFACE_ID R_Ip6ConfigInterfaceId
-UINT32 R_Ip6ConfigPolicy
-EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS R_Ip6ConfigDadTransmits
-
-#
-# Check Point: Call Ip6Config->SetData to set manual policy
-#
-SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
-SetVar R_Ip6ConfigDataSize [Sizeof UINT32]
-SetVar R_Ip6ConfigPolicy $IP6CP(Automatic)
-
-SetVar R_Context 0
-BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context,\
- &@R_DoneEvent, &@R_Status"
-GetAck
-set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
-RecordAssertion $assert $GenericAssertionGuid \
- "BS.CreateEvent." \
- "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
-Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
-GetAck
-set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
-RecordAssertion $assert $GenericAssertionGuid \
- "Ip6Config.RegisterDataNotify - Register notification event for configuration." \
- "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
-
-Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_Status"
-GetAck
-GetVar R_Status
-if { $R_Status == $EFI_SUCCESS } {
- set assert pass
- RecordAssertion $assert $GenericAssertionGuid \
- "Ip6Config.SetData - Call SetData to set manual policy." \
- "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
-} elseif { $R_Status == $EFI_NOT_READY } {
- set i 0
- set L_TimeOut 30
- while { 1 > 0 } {
- GetVar R_Context
- if { $R_Context == 1 } {
- break
- } elseif { $i == $L_TimeOut } {
- set assert fail
- RecordAssertion $assert $GenericAssertionGuid \
- "SetData failed.(event hasn't been signaled before TIMEOUT)." \
- "TIMEOUT value is $L_TimeOut (sec), "
- SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
- Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
- GetAck
- BS->CloseEvent {@R_DoneEvent,&@R_Status}
- GetAck
- EndScope _IP6CONFIG_SETDATA_CONF4
- EndLog
- return
- }
- incr i
- Stall 1
- }
-} else {
- set assert fail
- RecordAssertion $assert $GenericAssertionGuid \
- "Ip6Config.SetData - Call SetData to set manual policy." \
- "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
-
- SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
- Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
- GetAck
- BS->CloseEvent {@R_DoneEvent,&@R_Status}
- GetAck
- EndScope _IP6CONFIG_SETDATA_CONF4
- EndLog
- return
-}
-
-Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_Status"
-GetAck
-set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
-RecordAssertion $assert $GenericAssertionGuid \
- "Ip6Config.GetData - Call GetData to get policy value." \
- "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
-GetVar R_Ip6ConfigPolicy
-if { $R_Ip6ConfigPolicy == $IP6CP(Automatic) } {
- set assert pass
-} else {
- set assert fail
-
- RecordAssertion $assert $GenericAssertionGuid \
- "Set automatic policy succeeds(event is signaled correctly and data correct)."
- SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
- Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
- GetAck
- BS->CloseEvent {@R_DoneEvent,&@R_Status}
- GetAck
- EndScope _IP6CONFIG_SETDATA_CONF4
- EndLog
- return
-}
-RecordAssertion $assert $GenericAssertionGuid \
- "Set automatic policy succeeds(event is signaled correctly and data correct)."
-
-#
-# Check Point : Set Manual Address under automatic policy
-#
-EFI_IP6_CONFIG_MANUAL_ADDRESS R_Temp_Ip6ConfigManualAddress
-
-set L_ManualListLen 1
-EFI_IP6_CONFIG_MANUAL_ADDRESS R_Ip6ConfigManualAddress
-set L_UnitLen [Sizeof EFI_IP6_CONFIG_MANUAL_ADDRESS]
-set L_ListLen [expr {$L_UnitLen * $L_ManualListLen}]
-SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
-SetVar R_Ip6ConfigDataSize $L_ListLen
-SetVar R_Temp_Ip6ConfigManualAddress.IsAnycast FALSE
-SetVar R_Temp_Ip6ConfigManualAddress.PrefixLength 64
-SetIpv6Address R_Temp_Ip6ConfigManualAddress.Address "2002::5000"
-SetVar R_Ip6ConfigManualAddress @R_Temp_Ip6ConfigManualAddress
-
-Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigManualAddress,&@R_Status"
-GetAck
-set assert [VerifyReturnStatus R_Status $EFI_WRITE_PROTECTED]
-RecordAssertion $assert $Ip6ConfigSetDataConf4AssertionGuid001 \
- "Ip6Config.SetData - Call SetData to set manual address under automatic poilcy." \
- "ReturnStatus - $R_Status, ExpectedStatus - $EFI_WRITE_PROTECTED"
-
-DelVar R_Ip6ConfigManualAddress
-
-#
-# Check Points : Set Gateway under automatic policy
-#
-set L_GatewayListLen 1
-EFI_IPv6_ADDRESS R_Temp_Ip6ConfigGateway
-EFI_IPv6_ADDRESS R_Ip6ConfigGateway
-set L_UnitLen [Sizeof EFI_IPv6_ADDRESS]
-set L_ListLen [expr {$L_UnitLen * $L_GatewayListLen}]
-SetVar R_Ip6ConfigDataType $IP6CDT(Gateway)
-SetVar R_Ip6ConfigDataSize $L_ListLen
-
-SetIpv6Address R_Temp_Ip6ConfigGateway "2002::5001"
-SetVar R_Ip6ConfigGateway @R_Temp_Ip6ConfigGateway
-Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigGateway,&@R_Status"
-GetAck
-set assert [VerifyReturnStatus R_Status $EFI_WRITE_PROTECTED]
-RecordAssertion $assert $Ip6ConfigSetDataConf4AssertionGuid002 \
- "Ip6Config.SetData - Call SetData to set gateway under automatic policy." \
- "ReturnStatus - $R_Status, ExpectedStatus - $EFI_WRITE_PROTECTED"
-
-DelVar R_Ip6ConfigGateway
-
-#
-# Check Point : Set Dns Server under automatic policy
-#
-set L_DnsServerListLen 1
-EFI_IPv6_ADDRESS R_Temp_Ip6ConfigDnsServer
-EFI_IPv6_ADDRESS R_Ip6ConfigDnsServer
-set L_UnitLen [Sizeof EFI_IPv6_ADDRESS]
-set L_ListLen [expr {$L_UnitLen * $L_DnsServerListLen}]
-SetVar R_Ip6ConfigDataType $IP6CDT(DnsServer)
-SetVar R_Ip6ConfigDataSize $L_ListLen
-
-SetIpv6Address R_Temp_Ip6ConfigDnsServer "2002::5001"
-SetVar R_Ip6ConfigDnsServer @R_Temp_Ip6ConfigDnsServer
-
-Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigDnsServer,&@R_Status"
-GetAck
-set assert [VerifyReturnStatus R_Status $EFI_WRITE_PROTECTED]
-RecordAssertion $assert $Ip6ConfigSetDataConf4AssertionGuid003 \
- "Ip6Config.SetData - Call SetData to set dns server under automatic policy." \
- "ReturnStatus - $R_Status, ExpectedStatus - $EFI_WRITE_PROTECTED"
-
-DelVar R_Ip6ConfigDnsServer
-
-#
-# Clean up
-#
-SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
-Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
-GetAck
-set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
-RecordAssertion $assert $GenericAssertionGuid \
- "Ip6Config.UnregisterDataNotify - Unregister notification event for configuration." \
- "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
-
-BS->CloseEvent {@R_DoneEvent,&@R_Status}
-GetAck
-
-EndScope _IP6CONFIG_SETDATA_CONF4
-
+#
+# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
+# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
+#
+# This program and the accompanying materials
+# are licensed and made available under the terms and conditions of the BSD License
+# which accompanies this distribution. The full text of the license may be found at
+# http://opensource.org/licenses/bsd-license.php
+#
+# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+#
+################################################################################
+CaseLevel CONFORMANCE
+CaseAttribute AUTO
+CaseVerboseLevel DEFAULT
+set reportfile report.csv
+
+#
+# test case Name, category, description, GUID...
+#
+CaseGuid D0A2D271-0BBF-4092-A61E-96FB23208DE0
+CaseName SetData.Conf4.Case1
+CaseCategory IP6Config
+CaseDescription {SetData must not succeed when data is not configurable in current policy.}
+
+################################################################################
+Include IP6Config/Include/Ip6Config.inc.tcl
+
+
+#
+# Begin log ...
+#
+BeginLog
+
+#
+# BeginScope
+#
+BeginScope _IP6CONFIG_SETDATA_CONF4
+
+#
+# Parameter Definition
+# R_ represents "Remote EFI Side Parameter"
+# L_ represents "Local ENTS Side Parameter"
+#
+UINTN R_Status
+UINTN R_Context
+UINTN R_DoneEvent
+UINTN R_Ip6ConfigDataSize
+UINT32 R_Ip6ConfigDataType
+EFI_IP6_CONFIG_INTERFACE_INFO R_Ip6ConfigInterfaceInfo
+EFI_IP6_CONFIG_INTERFACE_ID R_Ip6ConfigInterfaceId
+UINT32 R_Ip6ConfigPolicy
+EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS R_Ip6ConfigDadTransmits
+
+#
+# Check Point: Call Ip6Config->SetData to set manual policy
+#
+SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
+SetVar R_Ip6ConfigDataSize [Sizeof UINT32]
+SetVar R_Ip6ConfigPolicy $IP6CP(Automatic)
+
+SetVar R_Context 0
+BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context,\
+ &@R_DoneEvent, &@R_Status"
+GetAck
+set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
+RecordAssertion $assert $GenericAssertionGuid \
+ "BS.CreateEvent." \
+ "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
+Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
+GetAck
+set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
+RecordAssertion $assert $GenericAssertionGuid \
+ "Ip6Config.RegisterDataNotify - Register notification event for configuration." \
+ "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
+
+Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_Status"
+GetAck
+GetVar R_Status
+if { $R_Status == $EFI_SUCCESS } {
+ set assert pass
+ RecordAssertion $assert $GenericAssertionGuid \
+ "Ip6Config.SetData - Call SetData to set manual policy." \
+ "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
+} elseif { $R_Status == $EFI_NOT_READY } {
+ set i 0
+ set L_TimeOut 30
+ while { 1 > 0 } {
+ GetVar R_Context
+ if { $R_Context == 1 } {
+ break
+ } elseif { $i == $L_TimeOut } {
+ set assert fail
+ RecordAssertion $assert $GenericAssertionGuid \
+ "SetData failed.(event hasn't been signaled before TIMEOUT)." \
+ "TIMEOUT value is $L_TimeOut (sec), "
+ SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
+ Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
+ GetAck
+ BS->CloseEvent {@R_DoneEvent,&@R_Status}
+ GetAck
+ EndScope _IP6CONFIG_SETDATA_CONF4
+ EndLog
+ return
+ }
+ incr i
+ Stall 1
+ }
+} else {
+ set assert fail
+ RecordAssertion $assert $GenericAssertionGuid \
+ "Ip6Config.SetData - Call SetData to set manual policy." \
+ "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
+
+ SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
+ Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
+ GetAck
+ BS->CloseEvent {@R_DoneEvent,&@R_Status}
+ GetAck
+ EndScope _IP6CONFIG_SETDATA_CONF4
+ EndLog
+ return
+}
+
+Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_Status"
+GetAck
+set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
+RecordAssertion $assert $GenericAssertionGuid \
+ "Ip6Config.GetData - Call GetData to get policy value." \
+ "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
+GetVar R_Ip6ConfigPolicy
+if { $R_Ip6ConfigPolicy == $IP6CP(Automatic) } {
+ set assert pass
+} else {
+ set assert fail
+
+ RecordAssertion $assert $GenericAssertionGuid \
+ "Set automatic policy succeeds(event is signaled correctly and data correct)."
+ SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
+ Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
+ GetAck
+ BS->CloseEvent {@R_DoneEvent,&@R_Status}
+ GetAck
+ EndScope _IP6CONFIG_SETDATA_CONF4
+ EndLog
+ return
+}
+RecordAssertion $assert $GenericAssertionGuid \
+ "Set automatic policy succeeds(event is signaled correctly and data correct)."
+
+#
+# Check Point : Set Manual Address under automatic policy
+#
+EFI_IP6_CONFIG_MANUAL_ADDRESS R_Temp_Ip6ConfigManualAddress
+
+set L_ManualListLen 1
+EFI_IP6_CONFIG_MANUAL_ADDRESS R_Ip6ConfigManualAddress
+set L_UnitLen [Sizeof EFI_IP6_CONFIG_MANUAL_ADDRESS]
+set L_ListLen [expr {$L_UnitLen * $L_ManualListLen}]
+SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
+SetVar R_Ip6ConfigDataSize $L_ListLen
+SetVar R_Temp_Ip6ConfigManualAddress.IsAnycast FALSE
+SetVar R_Temp_Ip6ConfigManualAddress.PrefixLength 64
+SetIpv6Address R_Temp_Ip6ConfigManualAddress.Address "2002::5000"
+SetVar R_Ip6ConfigManualAddress @R_Temp_Ip6ConfigManualAddress
+
+Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigManualAddress,&@R_Status"
+GetAck
+set assert [VerifyReturnStatus R_Status $EFI_WRITE_PROTECTED]
+RecordAssertion $assert $Ip6ConfigSetDataConf4AssertionGuid001 \
+ "Ip6Config.SetData - Call SetData to set manual address under automatic poilcy." \
+ "ReturnStatus - $R_Status, ExpectedStatus - $EFI_WRITE_PROTECTED"
+
+DelVar R_Ip6ConfigManualAddress
+
+#
+# Check Points : Set Gateway under automatic policy
+#
+set L_GatewayListLen 1
+EFI_IPv6_ADDRESS R_Temp_Ip6ConfigGateway
+EFI_IPv6_ADDRESS R_Ip6ConfigGateway
+set L_UnitLen [Sizeof EFI_IPv6_ADDRESS]
+set L_ListLen [expr {$L_UnitLen * $L_GatewayListLen}]
+SetVar R_Ip6ConfigDataType $IP6CDT(Gateway)
+SetVar R_Ip6ConfigDataSize $L_ListLen
+
+SetIpv6Address R_Temp_Ip6ConfigGateway "2002::5001"
+SetVar R_Ip6ConfigGateway @R_Temp_Ip6ConfigGateway
+Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigGateway,&@R_Status"
+GetAck
+set assert [VerifyReturnStatus R_Status $EFI_WRITE_PROTECTED]
+RecordAssertion $assert $Ip6ConfigSetDataConf4AssertionGuid002 \
+ "Ip6Config.SetData - Call SetData to set gateway under automatic policy." \
+ "ReturnStatus - $R_Status, ExpectedStatus - $EFI_WRITE_PROTECTED"
+
+DelVar R_Ip6ConfigGateway
+
+#
+# Check Point : Set Dns Server under automatic policy
+#
+set L_DnsServerListLen 1
+EFI_IPv6_ADDRESS R_Temp_Ip6ConfigDnsServer
+EFI_IPv6_ADDRESS R_Ip6ConfigDnsServer
+set L_UnitLen [Sizeof EFI_IPv6_ADDRESS]
+set L_ListLen [expr {$L_UnitLen * $L_DnsServerListLen}]
+SetVar R_Ip6ConfigDataType $IP6CDT(DnsServer)
+SetVar R_Ip6ConfigDataSize $L_ListLen
+
+SetIpv6Address R_Temp_Ip6ConfigDnsServer "2002::5001"
+SetVar R_Ip6ConfigDnsServer @R_Temp_Ip6ConfigDnsServer
+
+Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigDnsServer,&@R_Status"
+GetAck
+set assert [VerifyReturnStatus R_Status $EFI_WRITE_PROTECTED]
+RecordAssertion $assert $Ip6ConfigSetDataConf4AssertionGuid003 \
+ "Ip6Config.SetData - Call SetData to set dns server under automatic policy." \
+ "ReturnStatus - $R_Status, ExpectedStatus - $EFI_WRITE_PROTECTED"
+
+DelVar R_Ip6ConfigDnsServer
+
+#
+# Clean up
+#
+SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
+Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
+GetAck
+set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
+RecordAssertion $assert $GenericAssertionGuid \
+ "Ip6Config.UnregisterDataNotify - Unregister notification event for configuration." \
+ "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
+
+BS->CloseEvent {@R_DoneEvent,&@R_Status}
+GetAck
+
+EndScope _IP6CONFIG_SETDATA_CONF4
+
EndLog
\ No newline at end of file
diff --git a/uefi-sct/EMS/Bin/TestCase/IP6Config/SetData.Conf5.Case1.tcl b/uefi-sct/EMS/Bin/TestCase/IP6Config/SetData.Conf5.Case1.tcl
index 9b7e9c1..5e5a3e1 100644
--- a/uefi-sct/EMS/Bin/TestCase/IP6Config/SetData.Conf5.Case1.tcl
+++ b/uefi-sct/EMS/Bin/TestCase/IP6Config/SetData.Conf5.Case1.tcl
@@ -1,279 +1,279 @@
-#
-# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
-# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
-#
-# This program and the accompanying materials
-# are licensed and made available under the terms and conditions of the BSD License
-# which accompanies this distribution. The full text of the license may be found at
-# http://opensource.org/licenses/bsd-license.php
-#
-# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
-# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-#
-################################################################################
-CaseLevel CONFORMANCE
-CaseAttribute AUTO
-CaseVerboseLevel DEFAULT
-set reportfile report.csv
-
-#
-# test case Name, category, description, GUID...
-#
-CaseGuid 1F1728C3-BB62-4f28-9D75-6E631F7A6833
-CaseName SetData.Conf5.Case1
-CaseCategory IP6Config
-CaseDescription {SetData must not succeed when data size does not match the data type.}
-
-################################################################################
-Include IP6Config/Include/Ip6Config.inc.tcl
-
-
-#
-# Begin log ...
-#
-BeginLog
-
-#
-# BeginScope
-#
-BeginScope _IP6CONFIG_SETDATA_CONF5
-
-#
-# Parameter Definition
-# R_ represents "Remote EFI Side Parameter"
-# L_ represents "Local ENTS Side Parameter"
-#
-UINTN R_Status
-UINTN R_Context
-UINTN R_DoneEvent
-UINTN R_Ip6ConfigDataSize
-UINT32 R_Ip6ConfigDataType
-EFI_IP6_CONFIG_INTERFACE_INFO R_Ip6ConfigInterfaceInfo
-EFI_IP6_CONFIG_INTERFACE_ID R_Ip6ConfigInterfaceId
-UINT32 R_Ip6ConfigPolicy
-EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS R_Ip6ConfigDadTransmits
-
-#
-# Check Point: Call Ip6Config->SetData to set manual policy
-#
-SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
-SetVar R_Ip6ConfigDataSize [Sizeof UINT32]
-SetVar R_Ip6ConfigPolicy $IP6CP(Manual)
-
-SetVar R_Context 0
-BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context,\
- &@R_DoneEvent, &@R_Status"
-GetAck
-set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
-RecordAssertion $assert $GenericAssertionGuid \
- "BS.CreateEvent." \
- "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
-
-Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
-GetAck
-set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
-RecordAssertion $assert $GenericAssertionGuid \
- "Ip6Config.RegisterDataNotify - Register notification event for configuration." \
- "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
-
-Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_Status"
-GetAck
-GetVar R_Status
-if { $R_Status == $EFI_SUCCESS } {
- set assert pass
- RecordAssertion $assert $GenericAssertionGuid \
- "Ip6Config.SetData - Call SetData to set manual policy." \
- "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
-} elseif { $R_Status == $EFI_NOT_READY } {
- set i 0
- set L_TimeOut 30
- while { 1 > 0 } {
- GetVar R_Context
- if { $R_Context == 1 } {
- break
- } elseif { $i == $L_TimeOut } {
- set assert fail
- RecordAssertion $assert $GenericAssertionGuid \
- "SetData failed.(event hasn't been signaled before TIMEOUT)." \
- "TIMEOUT value is $L_TimeOut (sec), "
- SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
- Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
- GetAck
- BS->CloseEvent {@R_DoneEvent,&@R_Status}
- GetAck
- EndScope _IP6CONFIG_SETDATA_CONF5
- EndLog
- return
- }
- incr i
- Stall 1
- }
-} else {
- set assert fail
- RecordAssertion $assert $GenericAssertionGuid \
- "Ip6Config.SetData - Call SetData to set manual policy." \
- "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
-
- SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
- Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
- GetAck
- BS->CloseEvent {@R_DoneEvent,&@R_Status}
- GetAck
- EndScope _IP6CONFIG_SETDATA_CONF5
- EndLog
- return
-}
-
-Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_Status"
-GetAck
-set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
-RecordAssertion $assert $GenericAssertionGuid \
- "Ip6Config.GetData - Call GetData to get policy value." \
- "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
-GetVar R_Ip6ConfigPolicy
-if { $R_Ip6ConfigPolicy == $IP6CP(Manual) } {
- set assert pass
-} else {
- set assert fail
-
- RecordAssertion $assert $GenericAssertionGuid \
- "Set manual policy succeeds(event is signaled correctly and data correct)."
- SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
- Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
- GetAck
- BS->CloseEvent {@R_DoneEvent,&@R_Status}
- GetAck
- EndScope _IP6CONFIG_SETDATA_CONF5
- EndLog
- return
-}
-RecordAssertion $assert $GenericAssertionGuid \
- "Set manual policy succeeds(event is signaled correctly and data correct)."
-
-#
-# Check Point : Set Manual Address with wrong data size
-#
-EFI_IP6_CONFIG_MANUAL_ADDRESS R_Temp_Ip6ConfigManualAddress
-
-set L_ManualListLen 1
-EFI_IP6_CONFIG_MANUAL_ADDRESS R_Ip6ConfigManualAddress
-set L_UnitLen [Sizeof EFI_IP6_CONFIG_MANUAL_ADDRESS]
-set L_ListLen [expr {$L_UnitLen * $L_ManualListLen}]
-SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
-SetVar R_Ip6ConfigDataSize 16
-SetVar R_Temp_Ip6ConfigManualAddress.IsAnycast FALSE
-SetVar R_Temp_Ip6ConfigManualAddress.PrefixLength 64
-SetIpv6Address R_Temp_Ip6ConfigManualAddress.Address "2002::5000"
-SetVar R_Ip6ConfigManualAddress @R_Temp_Ip6ConfigManualAddress
-
-Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigManualAddress,&@R_Status"
-GetAck
-set assert [VerifyReturnStatus R_Status $EFI_BAD_BUFFER_SIZE]
-RecordAssertion $assert $Ip6ConfigSetDataConf5AssertionGuid001 \
- "Ip6Config.SetData - Call SetData to set manual address with wrong data size." \
- "ReturnStatus - $R_Status, ExpectedStatus - $EFI_BAD_BUFFER_SIZE"
-DelVar R_Ip6ConfigManualAddress
-
-#
-# Check Points : Set Gateway with wrong data size
-#
-set L_GatewayListLen 1
-EFI_IPv6_ADDRESS R_Temp_Ip6ConfigGateway
-EFI_IPv6_ADDRESS R_Ip6ConfigGateway
-set L_UnitLen [Sizeof EFI_IPv6_ADDRESS]
-set L_ListLen [expr {$L_UnitLen * $L_GatewayListLen}]
-SetVar R_Ip6ConfigDataType $IP6CDT(Gateway)
-SetVar R_Ip6ConfigDataSize 8
-
-SetIpv6Address R_Temp_Ip6ConfigGateway "2002::5001"
-SetVar R_Ip6ConfigGateway @R_Temp_Ip6ConfigGateway
-Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigGateway,&@R_Status"
-GetAck
-set assert [VerifyReturnStatus R_Status $EFI_BAD_BUFFER_SIZE]
-RecordAssertion $assert $Ip6ConfigSetDataConf5AssertionGuid002 \
- "Ip6Config.SetData - Call SetData to set gateway with wrong data size." \
- "ReturnStatus - $R_Status, ExpectedStatus - $EFI_BAD_BUFFER_SIZE"
-
-DelVar R_Ip6ConfigGateway
-
-#
-# Check Point : Set Dns Server with wrong data size
-#
-set L_DnsServerListLen 1
-EFI_IPv6_ADDRESS R_Temp_Ip6ConfigDnsServer
-EFI_IPv6_ADDRESS R_Ip6ConfigDnsServer
-set L_UnitLen [Sizeof EFI_IPv6_ADDRESS]
-set L_ListLen [expr {$L_UnitLen * $L_DnsServerListLen}]
-SetVar R_Ip6ConfigDataType $IP6CDT(DnsServer)
-SetVar R_Ip6ConfigDataSize 8
-
-SetIpv6Address R_Temp_Ip6ConfigDnsServer "2002::5002"
-SetVar R_Ip6ConfigDnsServer @R_Temp_Ip6ConfigDnsServer
-
-Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigDnsServer,&@R_Status"
-GetAck
-set assert [VerifyReturnStatus R_Status $EFI_BAD_BUFFER_SIZE]
-RecordAssertion $assert $Ip6ConfigSetDataConf5AssertionGuid003 \
- "Ip6Config.SetData - Call SetData to set dns server with wrong data size." \
- "ReturnStatus - $R_Status, ExpectedStatus - $EFI_BAD_BUFFER_SIZE"
-
-DelVar R_Ip6ConfigDnsServer
-
-#
-# Check Point : Set Altlfld with wrong data size
-#
-SetVar R_Ip6ConfigDataType $IP6CDT(AltInterfaceId)
-SetVar R_Ip6ConfigDataSize 1
-
-Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigInterfaceId,&@R_Status"
-GetAck
-set assert [VerifyReturnStatus R_Status $EFI_BAD_BUFFER_SIZE]
-RecordAssertion $assert $Ip6ConfigSetDataConf5AssertionGuid004 \
- "Ip6Config.SetData - Call SetData to set Altlfld with wrong data size." \
- "ReturnStatus - $R_Status, ExpectedStatus - $EFI_BAD_BUFFER_SIZE"
-
-#
-# Check Point : Set DadXmits with wrong data size
-#
-SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
-SetVar R_Ip6ConfigDataSize 1
-SetVar R_Ip6ConfigDadTransmits.DupAddrDetectTransmits 3
-
-Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigDadTransmits,&@R_Status"
-GetAck
-set assert [VerifyReturnStatus R_Status $EFI_BAD_BUFFER_SIZE]
-RecordAssertion $assert $Ip6ConfigSetDataConf5AssertionGuid005 \
- "Ip6Config.SetData - Call SetData to set DadXmits with wrong data size." \
- "ReturnStatus - $R_Status, ExpectedStatus - $EFI_BAD_BUFFER_SIZE"
-
-#
-# Check Point : Set Policy with wrong data size
-#
-SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
-SetVar R_Ip6ConfigDataSize 1
-SetVar R_Ip6ConfigPolicy $IP6CP(Manual)
-
-Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_Status"
-GetAck
-set assert [VerifyReturnStatus R_Status $EFI_BAD_BUFFER_SIZE]
-RecordAssertion $assert $Ip6ConfigSetDataConf5AssertionGuid006 \
- "Ip6Config.SetData - Call SetData to set Policy with wrong data size." \
- "ReturnStatus - $R_Status, ExpectedStatus - $EFI_BAD_BUFFER_SIZE"
-
-#
-# Clean up
-#
-SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
-Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
-GetAck
-set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
-RecordAssertion $assert $GenericAssertionGuid \
- "Ip6Config.UnregisterDataNotify - Unregister notification event for configuration." \
- "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
-
-BS->CloseEvent {@R_DoneEvent,&@R_Status}
-GetAck
-
-EndScope _IP6CONFIG_SETDATA_CONF5
-
+#
+# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
+# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
+#
+# This program and the accompanying materials
+# are licensed and made available under the terms and conditions of the BSD License
+# which accompanies this distribution. The full text of the license may be found at
+# http://opensource.org/licenses/bsd-license.php
+#
+# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+#
+################################################################################
+CaseLevel CONFORMANCE
+CaseAttribute AUTO
+CaseVerboseLevel DEFAULT
+set reportfile report.csv
+
+#
+# test case Name, category, description, GUID...
+#
+CaseGuid 1F1728C3-BB62-4f28-9D75-6E631F7A6833
+CaseName SetData.Conf5.Case1
+CaseCategory IP6Config
+CaseDescription {SetData must not succeed when data size does not match the data type.}
+
+################################################################################
+Include IP6Config/Include/Ip6Config.inc.tcl
+
+
+#
+# Begin log ...
+#
+BeginLog
+
+#
+# BeginScope
+#
+BeginScope _IP6CONFIG_SETDATA_CONF5
+
+#
+# Parameter Definition
+# R_ represents "Remote EFI Side Parameter"
+# L_ represents "Local ENTS Side Parameter"
+#
+UINTN R_Status
+UINTN R_Context
+UINTN R_DoneEvent
+UINTN R_Ip6ConfigDataSize
+UINT32 R_Ip6ConfigDataType
+EFI_IP6_CONFIG_INTERFACE_INFO R_Ip6ConfigInterfaceInfo
+EFI_IP6_CONFIG_INTERFACE_ID R_Ip6ConfigInterfaceId
+UINT32 R_Ip6ConfigPolicy
+EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS R_Ip6ConfigDadTransmits
+
+#
+# Check Point: Call Ip6Config->SetData to set manual policy
+#
+SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
+SetVar R_Ip6ConfigDataSize [Sizeof UINT32]
+SetVar R_Ip6ConfigPolicy $IP6CP(Manual)
+
+SetVar R_Context 0
+BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context,\
+ &@R_DoneEvent, &@R_Status"
+GetAck
+set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
+RecordAssertion $assert $GenericAssertionGuid \
+ "BS.CreateEvent." \
+ "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
+
+Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
+GetAck
+set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
+RecordAssertion $assert $GenericAssertionGuid \
+ "Ip6Config.RegisterDataNotify - Register notification event for configuration." \
+ "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
+
+Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_Status"
+GetAck
+GetVar R_Status
+if { $R_Status == $EFI_SUCCESS } {
+ set assert pass
+ RecordAssertion $assert $GenericAssertionGuid \
+ "Ip6Config.SetData - Call SetData to set manual policy." \
+ "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
+} elseif { $R_Status == $EFI_NOT_READY } {
+ set i 0
+ set L_TimeOut 30
+ while { 1 > 0 } {
+ GetVar R_Context
+ if { $R_Context == 1 } {
+ break
+ } elseif { $i == $L_TimeOut } {
+ set assert fail
+ RecordAssertion $assert $GenericAssertionGuid \
+ "SetData failed.(event hasn't been signaled before TIMEOUT)." \
+ "TIMEOUT value is $L_TimeOut (sec), "
+ SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
+ Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
+ GetAck
+ BS->CloseEvent {@R_DoneEvent,&@R_Status}
+ GetAck
+ EndScope _IP6CONFIG_SETDATA_CONF5
+ EndLog
+ return
+ }
+ incr i
+ Stall 1
+ }
+} else {
+ set assert fail
+ RecordAssertion $assert $GenericAssertionGuid \
+ "Ip6Config.SetData - Call SetData to set manual policy." \
+ "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
+
+ SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
+ Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
+ GetAck
+ BS->CloseEvent {@R_DoneEvent,&@R_Status}
+ GetAck
+ EndScope _IP6CONFIG_SETDATA_CONF5
+ EndLog
+ return
+}
+
+Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_Status"
+GetAck
+set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
+RecordAssertion $assert $GenericAssertionGuid \
+ "Ip6Config.GetData - Call GetData to get policy value." \
+ "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
+GetVar R_Ip6ConfigPolicy
+if { $R_Ip6ConfigPolicy == $IP6CP(Manual) } {
+ set assert pass
+} else {
+ set assert fail
+
+ RecordAssertion $assert $GenericAssertionGuid \
+ "Set manual policy succeeds(event is signaled correctly and data correct)."
+ SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
+ Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
+ GetAck
+ BS->CloseEvent {@R_DoneEvent,&@R_Status}
+ GetAck
+ EndScope _IP6CONFIG_SETDATA_CONF5
+ EndLog
+ return
+}
+RecordAssertion $assert $GenericAssertionGuid \
+ "Set manual policy succeeds(event is signaled correctly and data correct)."
+
+#
+# Check Point : Set Manual Address with wrong data size
+#
+EFI_IP6_CONFIG_MANUAL_ADDRESS R_Temp_Ip6ConfigManualAddress
+
+set L_ManualListLen 1
+EFI_IP6_CONFIG_MANUAL_ADDRESS R_Ip6ConfigManualAddress
+set L_UnitLen [Sizeof EFI_IP6_CONFIG_MANUAL_ADDRESS]
+set L_ListLen [expr {$L_UnitLen * $L_ManualListLen}]
+SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
+SetVar R_Ip6ConfigDataSize 16
+SetVar R_Temp_Ip6ConfigManualAddress.IsAnycast FALSE
+SetVar R_Temp_Ip6ConfigManualAddress.PrefixLength 64
+SetIpv6Address R_Temp_Ip6ConfigManualAddress.Address "2002::5000"
+SetVar R_Ip6ConfigManualAddress @R_Temp_Ip6ConfigManualAddress
+
+Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigManualAddress,&@R_Status"
+GetAck
+set assert [VerifyReturnStatus R_Status $EFI_BAD_BUFFER_SIZE]
+RecordAssertion $assert $Ip6ConfigSetDataConf5AssertionGuid001 \
+ "Ip6Config.SetData - Call SetData to set manual address with wrong data size." \
+ "ReturnStatus - $R_Status, ExpectedStatus - $EFI_BAD_BUFFER_SIZE"
+DelVar R_Ip6ConfigManualAddress
+
+#
+# Check Points : Set Gateway with wrong data size
+#
+set L_GatewayListLen 1
+EFI_IPv6_ADDRESS R_Temp_Ip6ConfigGateway
+EFI_IPv6_ADDRESS R_Ip6ConfigGateway
+set L_UnitLen [Sizeof EFI_IPv6_ADDRESS]
+set L_ListLen [expr {$L_UnitLen * $L_GatewayListLen}]
+SetVar R_Ip6ConfigDataType $IP6CDT(Gateway)
+SetVar R_Ip6ConfigDataSize 8
+
+SetIpv6Address R_Temp_Ip6ConfigGateway "2002::5001"
+SetVar R_Ip6ConfigGateway @R_Temp_Ip6ConfigGateway
+Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigGateway,&@R_Status"
+GetAck
+set assert [VerifyReturnStatus R_Status $EFI_BAD_BUFFER_SIZE]
+RecordAssertion $assert $Ip6ConfigSetDataConf5AssertionGuid002 \
+ "Ip6Config.SetData - Call SetData to set gateway with wrong data size." \
+ "ReturnStatus - $R_Status, ExpectedStatus - $EFI_BAD_BUFFER_SIZE"
+
+DelVar R_Ip6ConfigGateway
+
+#
+# Check Point : Set Dns Server with wrong data size
+#
+set L_DnsServerListLen 1
+EFI_IPv6_ADDRESS R_Temp_Ip6ConfigDnsServer
+EFI_IPv6_ADDRESS R_Ip6ConfigDnsServer
+set L_UnitLen [Sizeof EFI_IPv6_ADDRESS]
+set L_ListLen [expr {$L_UnitLen * $L_DnsServerListLen}]
+SetVar R_Ip6ConfigDataType $IP6CDT(DnsServer)
+SetVar R_Ip6ConfigDataSize 8
+
+SetIpv6Address R_Temp_Ip6ConfigDnsServer "2002::5002"
+SetVar R_Ip6ConfigDnsServer @R_Temp_Ip6ConfigDnsServer
+
+Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigDnsServer,&@R_Status"
+GetAck
+set assert [VerifyReturnStatus R_Status $EFI_BAD_BUFFER_SIZE]
+RecordAssertion $assert $Ip6ConfigSetDataConf5AssertionGuid003 \
+ "Ip6Config.SetData - Call SetData to set dns server with wrong data size." \
+ "ReturnStatus - $R_Status, ExpectedStatus - $EFI_BAD_BUFFER_SIZE"
+
+DelVar R_Ip6ConfigDnsServer
+
+#
+# Check Point : Set Altlfld with wrong data size
+#
+SetVar R_Ip6ConfigDataType $IP6CDT(AltInterfaceId)
+SetVar R_Ip6ConfigDataSize 1
+
+Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigInterfaceId,&@R_Status"
+GetAck
+set assert [VerifyReturnStatus R_Status $EFI_BAD_BUFFER_SIZE]
+RecordAssertion $assert $Ip6ConfigSetDataConf5AssertionGuid004 \
+ "Ip6Config.SetData - Call SetData to set Altlfld with wrong data size." \
+ "ReturnStatus - $R_Status, ExpectedStatus - $EFI_BAD_BUFFER_SIZE"
+
+#
+# Check Point : Set DadXmits with wrong data size
+#
+SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
+SetVar R_Ip6ConfigDataSize 1
+SetVar R_Ip6ConfigDadTransmits.DupAddrDetectTransmits 3
+
+Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigDadTransmits,&@R_Status"
+GetAck
+set assert [VerifyReturnStatus R_Status $EFI_BAD_BUFFER_SIZE]
+RecordAssertion $assert $Ip6ConfigSetDataConf5AssertionGuid005 \
+ "Ip6Config.SetData - Call SetData to set DadXmits with wrong data size." \
+ "ReturnStatus - $R_Status, ExpectedStatus - $EFI_BAD_BUFFER_SIZE"
+
+#
+# Check Point : Set Policy with wrong data size
+#
+SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
+SetVar R_Ip6ConfigDataSize 1
+SetVar R_Ip6ConfigPolicy $IP6CP(Manual)
+
+Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_Status"
+GetAck
+set assert [VerifyReturnStatus R_Status $EFI_BAD_BUFFER_SIZE]
+RecordAssertion $assert $Ip6ConfigSetDataConf5AssertionGuid006 \
+ "Ip6Config.SetData - Call SetData to set Policy with wrong data size." \
+ "ReturnStatus - $R_Status, ExpectedStatus - $EFI_BAD_BUFFER_SIZE"
+
+#
+# Clean up
+#
+SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
+Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
+GetAck
+set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
+RecordAssertion $assert $GenericAssertionGuid \
+ "Ip6Config.UnregisterDataNotify - Unregister notification event for configuration." \
+ "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
+
+BS->CloseEvent {@R_DoneEvent,&@R_Status}
+GetAck
+
+EndScope _IP6CONFIG_SETDATA_CONF5
+
EndLog
\ No newline at end of file
diff --git a/uefi-sct/EMS/Bin/TestCase/IP6Config/SetData.Conf6.Case1.tcl b/uefi-sct/EMS/Bin/TestCase/IP6Config/SetData.Conf6.Case1.tcl
index 0430336..0bc8880 100644
--- a/uefi-sct/EMS/Bin/TestCase/IP6Config/SetData.Conf6.Case1.tcl
+++ b/uefi-sct/EMS/Bin/TestCase/IP6Config/SetData.Conf6.Case1.tcl
@@ -1,72 +1,72 @@
-#
-# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
-# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
-#
-# This program and the accompanying materials
-# are licensed and made available under the terms and conditions of the BSD License
-# which accompanies this distribution. The full text of the license may be found at
-# http://opensource.org/licenses/bsd-license.php
-#
-# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
-# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-#
-################################################################################
-CaseLevel CONFORMANCE
-CaseAttribute AUTO
-CaseVerboseLevel DEFAULT
-set reportfile report.csv
-
-#
-# test case Name, category, description, GUID...
-#
-CaseGuid 6C5FB23E-96A5-475a-8B7E-24B9BBB99C2A
-CaseName SetData.Conf6.Case1
-CaseCategory IP6Config
-CaseDescription {SetData must not succeed when data type is not supported.}
-
-################################################################################
-Include IP6Config/Include/Ip6Config.inc.tcl
-
-
-#
-# Begin log ...
-#
-BeginLog
-
-#
-# BeginScope
-#
-BeginScope _IP6CONFIG_SETDATA_CONF6
-
-#
-# Parameter Definition
-# R_ represents "Remote EFI Side Parameter"
-# L_ represents "Local ENTS Side Parameter"
-#
-UINTN R_Status
-UINTN R_Context
-UINTN R_DoneEvent
-UINTN R_Ip6ConfigDataSize
-UINT32 R_Ip6ConfigDataType
-EFI_IP6_CONFIG_INTERFACE_INFO R_Ip6ConfigInterfaceInfo
-EFI_IP6_CONFIG_INTERFACE_ID R_Ip6ConfigInterfaceId
-UINT32 R_Ip6ConfigPolicy
-EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS R_Ip6ConfigDadTransmits
-EFI_IP6_CONFIG_MANUAL_ADDRESS R_Ip6ConfigManualAddress
-UINT32 R_Ip6ConfigMaximum
-#
-# Check Point: Call Ip6Config->SetData when data type is not supported.
-#
-SetVar R_Ip6ConfigDataType $IP6CDT(Maximum)
-SetVar R_Ip6ConfigDataSize [Sizeof UINT32]
-
-Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigMaximum,&@R_Status"
-GetAck
-set assert [VerifyReturnStatus R_Status $EFI_UNSUPPORTED]
-RecordAssertion $assert $Ip6ConfigSetDataConf6AssertionGuid001 \
- "Ip6Config.SetData - Call SetData with the data type not supported." \
- "ReturnStatus - $R_Status, ExpectedStatus - $EFI_UNSUPPORTED"
-
-EndScope _IP6CONFIG_SETDATA_CONF6
-
+#
+# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
+# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
+#
+# This program and the accompanying materials
+# are licensed and made available under the terms and conditions of the BSD License
+# which accompanies this distribution. The full text of the license may be found at
+# http://opensource.org/licenses/bsd-license.php
+#
+# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+#
+################################################################################
+CaseLevel CONFORMANCE
+CaseAttribute AUTO
+CaseVerboseLevel DEFAULT
+set reportfile report.csv
+
+#
+# test case Name, category, description, GUID...
+#
+CaseGuid 6C5FB23E-96A5-475a-8B7E-24B9BBB99C2A
+CaseName SetData.Conf6.Case1
+CaseCategory IP6Config
+CaseDescription {SetData must not succeed when data type is not supported.}
+
+################################################################################
+Include IP6Config/Include/Ip6Config.inc.tcl
+
+
+#
+# Begin log ...
+#
+BeginLog
+
+#
+# BeginScope
+#
+BeginScope _IP6CONFIG_SETDATA_CONF6
+
+#
+# Parameter Definition
+# R_ represents "Remote EFI Side Parameter"
+# L_ represents "Local ENTS Side Parameter"
+#
+UINTN R_Status
+UINTN R_Context
+UINTN R_DoneEvent
+UINTN R_Ip6ConfigDataSize
+UINT32 R_Ip6ConfigDataType
+EFI_IP6_CONFIG_INTERFACE_INFO R_Ip6ConfigInterfaceInfo
+EFI_IP6_CONFIG_INTERFACE_ID R_Ip6ConfigInterfaceId
+UINT32 R_Ip6ConfigPolicy
+EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS R_Ip6ConfigDadTransmits
+EFI_IP6_CONFIG_MANUAL_ADDRESS R_Ip6ConfigManualAddress
+UINT32 R_Ip6ConfigMaximum
+#
+# Check Point: Call Ip6Config->SetData when data type is not supported.
+#
+SetVar R_Ip6ConfigDataType $IP6CDT(Maximum)
+SetVar R_Ip6ConfigDataSize [Sizeof UINT32]
+
+Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigMaximum,&@R_Status"
+GetAck
+set assert [VerifyReturnStatus R_Status $EFI_UNSUPPORTED]
+RecordAssertion $assert $Ip6ConfigSetDataConf6AssertionGuid001 \
+ "Ip6Config.SetData - Call SetData with the data type not supported." \
+ "ReturnStatus - $R_Status, ExpectedStatus - $EFI_UNSUPPORTED"
+
+EndScope _IP6CONFIG_SETDATA_CONF6
+
EndLog
\ No newline at end of file
diff --git a/uefi-sct/EMS/Bin/TestCase/IP6Config/SetData.Conf7.Case1.tcl b/uefi-sct/EMS/Bin/TestCase/IP6Config/SetData.Conf7.Case1.tcl
index 15e118b..22b5676 100644
--- a/uefi-sct/EMS/Bin/TestCase/IP6Config/SetData.Conf7.Case1.tcl
+++ b/uefi-sct/EMS/Bin/TestCase/IP6Config/SetData.Conf7.Case1.tcl
@@ -1,510 +1,510 @@
-#
-# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
-# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
-#
-# This program and the accompanying materials
-# are licensed and made available under the terms and conditions of the BSD License
-# which accompanies this distribution. The full text of the license may be found at
-# http://opensource.org/licenses/bsd-license.php
-#
-# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
-# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-#
-################################################################################
-CaseLevel CONFORMANCE
-CaseAttribute AUTO
-CaseVerboseLevel DEFAULT
-set reportfile report.csv
-
-#
-# test case Name, category, description, GUID...
-#
-CaseGuid 477D07AC-6FEB-460b-BA92-A98245862D09
-CaseName SetData.Conf7.Case1
-CaseCategory IP6Config
-CaseDescription {SetData must not succeed when the last asynchronous process for the data type has not been finished yet.}
-
-################################################################################
-Include IP6Config/Include/Ip6Config.inc.tcl
-
-
-#
-# Begin log ...
-#
-BeginLog
-
-#
-# BeginScope
-#
-BeginScope _IP6CONFIG_SETDATA_CONF7
-
-#
-# Parameter Definition
-# R_ represents "Remote EFI Side Parameter"
-# L_ represents "Local ENTS Side Parameter"
-#
-UINTN R_Status
-UINTN R_Context
-UINTN R_DoneEvent
-UINTN R_Context1
-UINTN R_DoneEvent1
-UINTN R_Ip6ConfigDataSize
-UINT32 R_Ip6ConfigDataType
-EFI_IP6_CONFIG_INTERFACE_INFO R_Ip6ConfigInterfaceInfo
-EFI_IP6_CONFIG_INTERFACE_ID R_Ip6ConfigInterfaceId
-UINT32 R_Ip6ConfigPolicy
-EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS R_Ip6ConfigDadTransmits
-
-#
-# Check Point: Call Ip6Config->SetData to set manual policy
-#
-SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
-SetVar R_Ip6ConfigDataSize [Sizeof UINT32]
-SetVar R_Ip6ConfigPolicy $IP6CP(Manual)
-
-SetVar R_Context 0
-BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context,\
- &@R_DoneEvent, &@R_Status"
-GetAck
-set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
-RecordAssertion $assert $GenericAssertionGuid \
- "BS.CreateEvent." \
- "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
-
-Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
-GetAck
-set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
-RecordAssertion $assert $GenericAssertionGuid \
- "Ip6Config.RegisterDataNotify - Register notification event for configuration." \
- "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
-
-Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_Status"
-GetAck
-GetVar R_Status
-if { $R_Status == $EFI_SUCCESS } {
- set assert pass
- RecordAssertion $assert $GenericAssertionGuid \
- "Ip6Config.SetData - Call SetData to set manual policy." \
- "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
-} elseif { $R_Status == $EFI_NOT_READY } {
- set i 0
- set L_TimeOut 30
- while { 1 > 0 } {
- GetVar R_Context
- if { $R_Context == 1 } {
- break
- } elseif { $i == $L_TimeOut } {
- set assert fail
- RecordAssertion $assert $GenericAssertionGuid \
- "SetData failed.(event hasn't been signaled before TIMEOUT)." \
- "TIMEOUT value is $L_TimeOut (sec), "
-
- SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
- Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
- GetAck
- BS->CloseEvent {@R_DoneEvent,&@R_Status}
- GetAck
- EndScope _IP6CONFIG_SETDATA_CONF7
- EndLog
- return
- }
- incr i
- Stall 1
- }
-} else {
- set assert fail
- RecordAssertion $assert $GenericAssertionGuid \
- "Ip6Config.SetData - Call SetData to set manual policy." \
- "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
-
- SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
- Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
- GetAck
- BS->CloseEvent {@R_DoneEvent,&@R_Status}
- GetAck
- EndScope _IP6CONFIG_SETDATA_CONF7
- EndLog
- return
-}
-
-Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_Status"
-GetAck
-set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
-RecordAssertion $assert $GenericAssertionGuid \
- "Ip6Config.GetData - Call GetData to get policy value." \
- "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
-GetVar R_Ip6ConfigPolicy
-if { $R_Ip6ConfigPolicy == $IP6CP(Manual) } {
- set assert pass
-} else {
- set assert fail
-
- RecordAssertion $assert $GenericAssertionGuid \
- "Set manual policy succeeds(event is signaled correctly and data correct)."
- SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
- Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
- GetAck
- BS->CloseEvent {@R_DoneEvent,&@R_Status}
- GetAck
- EndScope _IP6CONFIG_SETDATA_CONF7
- EndLog
- return
-}
-RecordAssertion $assert $GenericAssertionGuid \
- "Set manual policy succeeds(event is signaled correctly and data correct)."
-
-#
-# Check Point: Call Ip6Config->SetData to set DadXmits 20
-#
-SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
-SetVar R_Ip6ConfigDataSize [Sizeof EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS]
-SetVar R_Ip6ConfigDadTransmits.DupAddrDetectTransmits 20
-
-SetVar R_Context1 0
-BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context1,\
- &@R_DoneEvent1, &@R_Status"
-GetAck
-set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
-RecordAssertion $assert $GenericAssertionGuid \
- "BS.CreateEvent." \
- "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
-
-Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
-GetAck
-set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
-RecordAssertion $assert $GenericAssertionGuid \
- "Ip6Config.RegisterDataNotify - Register notification event for configuration." \
- "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
-
-Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigDadTransmits,&@R_Status"
-GetAck
-GetVar R_Status
-if { $R_Status == $EFI_SUCCESS } {
- set assert pass
- RecordAssertion $assert $GenericAssertionGuid \
- "Ip6Config.SetData - Call SetData to set DadXmits 20." \
- "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
-} elseif { $R_Status == $EFI_NOT_READY } {
- set i 0
- set L_TimeOut 30
- while { 1 > 0 } {
- GetVar R_Context1
- if { $R_Context1 == 1 } {
- break
- } elseif { $i == $L_TimeOut } {
- set assert fail
- RecordAssertion $assert $GenericAssertionGuid \
- "SetData failed.(event hasn't been signaled before TIMEOUT)." \
- "TIMEOUT value is $L_TimeOut (sec), "
-
- SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
- Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
- GetAck
- BS->CloseEvent {@R_DoneEvent,&@R_Status}
- GetAck
- SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
- Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
- GetAck
- BS->CloseEvent {@R_DoneEvent1,&@R_Status}
- GetAck
- EndScope _IP6CONFIG_SETDATA_CONF7
- EndLog
- return
- }
- incr i
- Stall 1
- }
-} else {
- set assert fail
- RecordAssertion $assert $GenericAssertionGuid \
- "Ip6Config.SetData - Call SetData to set DadXmits 20." \
- "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
-
- SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
- Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
- GetAck
- BS->CloseEvent {@R_DoneEvent,&@R_Status}
- GetAck
- SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
- Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
- GetAck
- BS->CloseEvent {@R_DoneEvent1,&@R_Status}
- GetAck
- EndScope _IP6CONFIG_SETDATA_CONF7
- EndLog
- return
-}
-
-Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigDadTransmits,&@R_Status"
-GetAck
-set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
-RecordAssertion $assert $GenericAssertionGuid \
- "Ip6Config.GetData - Call GetData to get DadXmits value." \
- "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
-GetVar R_Ip6ConfigDadTransmits.DupAddrDetectTransmits
-if { ${R_Ip6ConfigDadTransmits.DupAddrDetectTransmits} == 20 } {
- set assert pass
-} else {
- set assert fail
-
- RecordAssertion $assert $GenericAssertionGuid \
- "Set DadXmits succeeds(event is signaled correctly and data correct)."
- SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
- Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
- GetAck
- BS->CloseEvent {@R_DoneEvent,&@R_Status}
- GetAck
- SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
- Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
- GetAck
- BS->CloseEvent {@R_DoneEvent1,&@R_Status}
- GetAck
- EndScope _IP6CONFIG_SETDATA_CONF7
- EndLog
- return
-}
-RecordAssertion $assert $GenericAssertionGuid \
- "Set DadXmits succeeds(event is signaled correctly and data correct)."
-
-#
-# Check Point : Set Manual Address with valid parameter
-#
-EFI_IP6_CONFIG_MANUAL_ADDRESS R_Temp_Ip6ConfigManualAddress
-
-set L_ManualListLen 1
-EFI_IP6_CONFIG_MANUAL_ADDRESS R_Ip6ConfigManualAddress
-set L_UnitLen [Sizeof EFI_IP6_CONFIG_MANUAL_ADDRESS]
-set L_ListLen [expr {$L_UnitLen * $L_ManualListLen}]
-SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
-SetVar R_Ip6ConfigDataSize $L_ListLen
-SetVar R_Temp_Ip6ConfigManualAddress.IsAnycast FALSE
-SetVar R_Temp_Ip6ConfigManualAddress.PrefixLength 64
-SetIpv6Address R_Temp_Ip6ConfigManualAddress.Address "2002::5000"
-SetVar R_Ip6ConfigManualAddress @R_Temp_Ip6ConfigManualAddress
-
-Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigManualAddress,&@R_Status"
-GetAck
-GetVar R_Status
-if { $R_Status == $EFI_NOT_READY } {
- set assert pass
-} else {
- set assert fail
-
- RecordAssertion $assert $GenericAssertionGuid \
- "Ip6Config.SetData - Call SetData to set manual address with valid parameter." \
- "ReturnStatus - $R_Status, ExpectedStatus - $EFI_NOT_READY"
- SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
- Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
- GetAck
- BS->CloseEvent {@R_DoneEvent,&@R_Status}
- GetAck
- SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
- Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
- GetAck
- BS->CloseEvent {@R_DoneEvent1,&@R_Status}
- GetAck
- EndScope _IP6CONFIG_SETDATA_CONF7
- EndLog
- return
-}
-RecordAssertion $assert $GenericAssertionGuid \
- "Ip6Config.SetData - Call SetData to set manual address with valid parameter." \
- "ReturnStatus - $R_Status, ExpectedStatus - $EFI_NOT_READY"
-
-DelVar R_Ip6ConfigManualAddress
-
-#
-# Check Point : Set Manual Address with valid parameter before the former setting finishes
-#
-set L_ManualListLen 1
-EFI_IP6_CONFIG_MANUAL_ADDRESS R_Ip6ConfigManualAddress
-set L_UnitLen [Sizeof EFI_IP6_CONFIG_MANUAL_ADDRESS]
-set L_ListLen [expr {$L_UnitLen * $L_ManualListLen}]
-SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
-SetVar R_Ip6ConfigDataSize $L_ListLen
-SetVar R_Temp_Ip6ConfigManualAddress.IsAnycast FALSE
-SetVar R_Temp_Ip6ConfigManualAddress.PrefixLength 64
-SetIpv6Address R_Temp_Ip6ConfigManualAddress.Address "2002::5001"
-SetVar R_Ip6ConfigManualAddress @R_Temp_Ip6ConfigManualAddress
-
-Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigManualAddress,&@R_Status"
-GetAck
-set assert [VerifyReturnStatus R_Status $EFI_ACCESS_DENIED]
-RecordAssertion $assert $Ip6ConfigSetDataConf7AssertionGuid001 \
- "Ip6Config.SetData - Call SetData to set manual address with valid parameter before the former setting finishes." \
- "ReturnStatus - $R_Status, ExpectedStatus - $EFI_ACCESS_DENIED"
-
-
-#
-# Make sure the former configurations succeeds
-# (Eliminate the side-effect to other cases)
-#
-set i 0
-set L_TimeOut 30
-Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigManualAddress,&@R_Status"
-GetAck
-GetVar R_Status
-set assert pass
-while { $R_Status == $EFI_NOT_READY } {
- Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigManualAddress,&@R_Status"
- GetAck
- GetVar R_Status
- if { $R_Status == $EFI_SUCCESS } {
- break
- } elseif { $i == $L_TimeOut } {
- set assert fail
-
- RecordAssertion $assert $GenericAssertionGuid \
- "Ip6Config.SetData - former SetData finishes." \
- "TimeUsed - $i, TimeOut Value- $L_TimeOut"
- SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
- Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
- GetAck
- BS->CloseEvent {@R_DoneEvent,&@R_Status}
- GetAck
- SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
- Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
- GetAck
- BS->CloseEvent {@R_DoneEvent1,&@R_Status}
- GetAck
- EndScope _IP6CONFIG_SETDATA_CONF7
- EndLog
- return
- }
- incr i
- Stall 1
-}
-RecordAssertion $assert $GenericAssertionGuid \
- "Ip6Config.SetData - former SetData finishes." \
- "TimeUsed - $i, TimeOut Value- $L_TimeOut"
-
-#
-# Set automatic policy (this will clean up all address information configured)
-#
-SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
-SetVar R_Ip6ConfigDataSize [Sizeof UINT32]
-SetVar R_Ip6ConfigPolicy $IP6CP(Automatic)
-
-SetVar R_Context 0
-
-Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_Status"
-GetAck
-GetVar R_Status
-if { $R_Status == $EFI_SUCCESS } {
- set assert pass
-} elseif { $R_Status == $EFI_NOT_READY } {
- set i 0
- set L_TimeOut 30
- set assert pass
- while { 1 > 0 } {
- GetVar R_Context
- if { $R_Context == 1 } {
- break
- } elseif { $i == $L_TimeOut } {
- set assert fail
-
- RecordAssertion $assert $GenericAssertionGuid \
- "Ip6Config.SetData - Set automatic policy to clean up the former configuration." \
- "TimeUsed - $i, TimeOut Value- $L_TimeOut"
- SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
- Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
- GetAck
- BS->CloseEvent {@R_DoneEvent,&@R_Status}
- GetAck
- SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
- Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
- GetAck
- BS->CloseEvent {@R_DoneEvent1,&@R_Status}
- GetAck
-
- EndScope _IP6CONFIG_SETDATA_CONF7
- EndLog
- return
- }
- incr i
- Stall 1
- }
-} else {
- set assert fail
-
- RecordAssertion $assert $GenericAssertionGuid \
- "Ip6Config.SetData - Set automatic policy to clean up the former configuration." \
- "TimeUsed - $i, TimeOut Value- $L_TimeOut"
- SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
- Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
- GetAck
- BS->CloseEvent {@R_DoneEvent,&@R_Status}
- GetAck
- SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
- Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
- GetAck
- BS->CloseEvent {@R_DoneEvent1,&@R_Status}
- GetAck
-
- EndScope _IP6CONFIG_SETDATA_CONF7
- EndLog
- return
-}
-
-Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_Status"
-GetAck
-GetVar R_Ip6ConfigPolicy
-if { $R_Ip6ConfigPolicy == $IP6CP(Automatic) } {
- set assert pass
-} else {
- set assert fail
-
- RecordAssertion $assert $GenericAssertionGuid \
- "Ip6Config.SetData - Set automatic policy to clean up the former configuration." \
- "TimeUsed - $i, TimeOut Value- $L_TimeOut"
- SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
- Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
- GetAck
- BS->CloseEvent {@R_DoneEvent,&@R_Status}
- GetAck
- SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
- Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
- GetAck
- BS->CloseEvent {@R_DoneEvent1,&@R_Status}
- GetAck
-
- EndScope _IP6CONFIG_SETDATA_CONF7
- EndLog
-
- return
-}
-
-RecordAssertion $assert $GenericAssertionGuid \
- "Ip6Config.SetData - Set automatic policy to clean up the former configuration." \
- "TimeUsed - $i, TimeOut Value- $L_TimeOut"
-
-
-#
-# Clean up
-#
-SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
-Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
-GetAck
-set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
-RecordAssertion $assert $GenericAssertionGuid \
- "Ip6Config.UnregisterDataNotify - Unregister notification event for configuration." \
- "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
-
-BS->CloseEvent {@R_DoneEvent,&@R_Status}
-GetAck
-
-SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
-Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
-GetAck
-set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
-RecordAssertion $assert $GenericAssertionGuid \
- "Ip6Config.UnregisterDataNotify - Unregister notification event for configuration." \
- "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
-
-BS->CloseEvent {@R_DoneEvent1,&@R_Status}
-GetAck
-
-EndScope _IP6CONFIG_SETDATA_CONF7
-
-EndLog
-
+#
+# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
+# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
+#
+# This program and the accompanying materials
+# are licensed and made available under the terms and conditions of the BSD License
+# which accompanies this distribution. The full text of the license may be found at
+# http://opensource.org/licenses/bsd-license.php
+#
+# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+#
+################################################################################
+CaseLevel CONFORMANCE
+CaseAttribute AUTO
+CaseVerboseLevel DEFAULT
+set reportfile report.csv
+
+#
+# test case Name, category, description, GUID...
+#
+CaseGuid 477D07AC-6FEB-460b-BA92-A98245862D09
+CaseName SetData.Conf7.Case1
+CaseCategory IP6Config
+CaseDescription {SetData must not succeed when the last asynchronous process for the data type has not been finished yet.}
+
+################################################################################
+Include IP6Config/Include/Ip6Config.inc.tcl
+
+
+#
+# Begin log ...
+#
+BeginLog
+
+#
+# BeginScope
+#
+BeginScope _IP6CONFIG_SETDATA_CONF7
+
+#
+# Parameter Definition
+# R_ represents "Remote EFI Side Parameter"
+# L_ represents "Local ENTS Side Parameter"
+#
+UINTN R_Status
+UINTN R_Context
+UINTN R_DoneEvent
+UINTN R_Context1
+UINTN R_DoneEvent1
+UINTN R_Ip6ConfigDataSize
+UINT32 R_Ip6ConfigDataType
+EFI_IP6_CONFIG_INTERFACE_INFO R_Ip6ConfigInterfaceInfo
+EFI_IP6_CONFIG_INTERFACE_ID R_Ip6ConfigInterfaceId
+UINT32 R_Ip6ConfigPolicy
+EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS R_Ip6ConfigDadTransmits
+
+#
+# Check Point: Call Ip6Config->SetData to set manual policy
+#
+SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
+SetVar R_Ip6ConfigDataSize [Sizeof UINT32]
+SetVar R_Ip6ConfigPolicy $IP6CP(Manual)
+
+SetVar R_Context 0
+BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context,\
+ &@R_DoneEvent, &@R_Status"
+GetAck
+set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
+RecordAssertion $assert $GenericAssertionGuid \
+ "BS.CreateEvent." \
+ "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
+
+Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
+GetAck
+set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
+RecordAssertion $assert $GenericAssertionGuid \
+ "Ip6Config.RegisterDataNotify - Register notification event for configuration." \
+ "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
+
+Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_Status"
+GetAck
+GetVar R_Status
+if { $R_Status == $EFI_SUCCESS } {
+ set assert pass
+ RecordAssertion $assert $GenericAssertionGuid \
+ "Ip6Config.SetData - Call SetData to set manual policy." \
+ "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
+} elseif { $R_Status == $EFI_NOT_READY } {
+ set i 0
+ set L_TimeOut 30
+ while { 1 > 0 } {
+ GetVar R_Context
+ if { $R_Context == 1 } {
+ break
+ } elseif { $i == $L_TimeOut } {
+ set assert fail
+ RecordAssertion $assert $GenericAssertionGuid \
+ "SetData failed.(event hasn't been signaled before TIMEOUT)." \
+ "TIMEOUT value is $L_TimeOut (sec), "
+
+ SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
+ Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
+ GetAck
+ BS->CloseEvent {@R_DoneEvent,&@R_Status}
+ GetAck
+ EndScope _IP6CONFIG_SETDATA_CONF7
+ EndLog
+ return
+ }
+ incr i
+ Stall 1
+ }
+} else {
+ set assert fail
+ RecordAssertion $assert $GenericAssertionGuid \
+ "Ip6Config.SetData - Call SetData to set manual policy." \
+ "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
+
+ SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
+ Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
+ GetAck
+ BS->CloseEvent {@R_DoneEvent,&@R_Status}
+ GetAck
+ EndScope _IP6CONFIG_SETDATA_CONF7
+ EndLog
+ return
+}
+
+Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_Status"
+GetAck
+set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
+RecordAssertion $assert $GenericAssertionGuid \
+ "Ip6Config.GetData - Call GetData to get policy value." \
+ "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
+GetVar R_Ip6ConfigPolicy
+if { $R_Ip6ConfigPolicy == $IP6CP(Manual) } {
+ set assert pass
+} else {
+ set assert fail
+
+ RecordAssertion $assert $GenericAssertionGuid \
+ "Set manual policy succeeds(event is signaled correctly and data correct)."
+ SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
+ Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
+ GetAck
+ BS->CloseEvent {@R_DoneEvent,&@R_Status}
+ GetAck
+ EndScope _IP6CONFIG_SETDATA_CONF7
+ EndLog
+ return
+}
+RecordAssertion $assert $GenericAssertionGuid \
+ "Set manual policy succeeds(event is signaled correctly and data correct)."
+
+#
+# Check Point: Call Ip6Config->SetData to set DadXmits 20
+#
+SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
+SetVar R_Ip6ConfigDataSize [Sizeof EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS]
+SetVar R_Ip6ConfigDadTransmits.DupAddrDetectTransmits 20
+
+SetVar R_Context1 0
+BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context1,\
+ &@R_DoneEvent1, &@R_Status"
+GetAck
+set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
+RecordAssertion $assert $GenericAssertionGuid \
+ "BS.CreateEvent." \
+ "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
+
+Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
+GetAck
+set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
+RecordAssertion $assert $GenericAssertionGuid \
+ "Ip6Config.RegisterDataNotify - Register notification event for configuration." \
+ "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
+
+Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigDadTransmits,&@R_Status"
+GetAck
+GetVar R_Status
+if { $R_Status == $EFI_SUCCESS } {
+ set assert pass
+ RecordAssertion $assert $GenericAssertionGuid \
+ "Ip6Config.SetData - Call SetData to set DadXmits 20." \
+ "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
+} elseif { $R_Status == $EFI_NOT_READY } {
+ set i 0
+ set L_TimeOut 30
+ while { 1 > 0 } {
+ GetVar R_Context1
+ if { $R_Context1 == 1 } {
+ break
+ } elseif { $i == $L_TimeOut } {
+ set assert fail
+ RecordAssertion $assert $GenericAssertionGuid \
+ "SetData failed.(event hasn't been signaled before TIMEOUT)." \
+ "TIMEOUT value is $L_TimeOut (sec), "
+
+ SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
+ Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
+ GetAck
+ BS->CloseEvent {@R_DoneEvent,&@R_Status}
+ GetAck
+ SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
+ Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
+ GetAck
+ BS->CloseEvent {@R_DoneEvent1,&@R_Status}
+ GetAck
+ EndScope _IP6CONFIG_SETDATA_CONF7
+ EndLog
+ return
+ }
+ incr i
+ Stall 1
+ }
+} else {
+ set assert fail
+ RecordAssertion $assert $GenericAssertionGuid \
+ "Ip6Config.SetData - Call SetData to set DadXmits 20." \
+ "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
+
+ SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
+ Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
+ GetAck
+ BS->CloseEvent {@R_DoneEvent,&@R_Status}
+ GetAck
+ SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
+ Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
+ GetAck
+ BS->CloseEvent {@R_DoneEvent1,&@R_Status}
+ GetAck
+ EndScope _IP6CONFIG_SETDATA_CONF7
+ EndLog
+ return
+}
+
+Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigDadTransmits,&@R_Status"
+GetAck
+set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
+RecordAssertion $assert $GenericAssertionGuid \
+ "Ip6Config.GetData - Call GetData to get DadXmits value." \
+ "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
+GetVar R_Ip6ConfigDadTransmits.DupAddrDetectTransmits
+if { ${R_Ip6ConfigDadTransmits.DupAddrDetectTransmits} == 20 } {
+ set assert pass
+} else {
+ set assert fail
+
+ RecordAssertion $assert $GenericAssertionGuid \
+ "Set DadXmits succeeds(event is signaled correctly and data correct)."
+ SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
+ Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
+ GetAck
+ BS->CloseEvent {@R_DoneEvent,&@R_Status}
+ GetAck
+ SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
+ Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
+ GetAck
+ BS->CloseEvent {@R_DoneEvent1,&@R_Status}
+ GetAck
+ EndScope _IP6CONFIG_SETDATA_CONF7
+ EndLog
+ return
+}
+RecordAssertion $assert $GenericAssertionGuid \
+ "Set DadXmits succeeds(event is signaled correctly and data correct)."
+
+#
+# Check Point : Set Manual Address with valid parameter
+#
+EFI_IP6_CONFIG_MANUAL_ADDRESS R_Temp_Ip6ConfigManualAddress
+
+set L_ManualListLen 1
+EFI_IP6_CONFIG_MANUAL_ADDRESS R_Ip6ConfigManualAddress
+set L_UnitLen [Sizeof EFI_IP6_CONFIG_MANUAL_ADDRESS]
+set L_ListLen [expr {$L_UnitLen * $L_ManualListLen}]
+SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
+SetVar R_Ip6ConfigDataSize $L_ListLen
+SetVar R_Temp_Ip6ConfigManualAddress.IsAnycast FALSE
+SetVar R_Temp_Ip6ConfigManualAddress.PrefixLength 64
+SetIpv6Address R_Temp_Ip6ConfigManualAddress.Address "2002::5000"
+SetVar R_Ip6ConfigManualAddress @R_Temp_Ip6ConfigManualAddress
+
+Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigManualAddress,&@R_Status"
+GetAck
+GetVar R_Status
+if { $R_Status == $EFI_NOT_READY } {
+ set assert pass
+} else {
+ set assert fail
+
+ RecordAssertion $assert $GenericAssertionGuid \
+ "Ip6Config.SetData - Call SetData to set manual address with valid parameter." \
+ "ReturnStatus - $R_Status, ExpectedStatus - $EFI_NOT_READY"
+ SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
+ Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
+ GetAck
+ BS->CloseEvent {@R_DoneEvent,&@R_Status}
+ GetAck
+ SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
+ Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
+ GetAck
+ BS->CloseEvent {@R_DoneEvent1,&@R_Status}
+ GetAck
+ EndScope _IP6CONFIG_SETDATA_CONF7
+ EndLog
+ return
+}
+RecordAssertion $assert $GenericAssertionGuid \
+ "Ip6Config.SetData - Call SetData to set manual address with valid parameter." \
+ "ReturnStatus - $R_Status, ExpectedStatus - $EFI_NOT_READY"
+
+DelVar R_Ip6ConfigManualAddress
+
+#
+# Check Point : Set Manual Address with valid parameter before the former setting finishes
+#
+set L_ManualListLen 1
+EFI_IP6_CONFIG_MANUAL_ADDRESS R_Ip6ConfigManualAddress
+set L_UnitLen [Sizeof EFI_IP6_CONFIG_MANUAL_ADDRESS]
+set L_ListLen [expr {$L_UnitLen * $L_ManualListLen}]
+SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
+SetVar R_Ip6ConfigDataSize $L_ListLen
+SetVar R_Temp_Ip6ConfigManualAddress.IsAnycast FALSE
+SetVar R_Temp_Ip6ConfigManualAddress.PrefixLength 64
+SetIpv6Address R_Temp_Ip6ConfigManualAddress.Address "2002::5001"
+SetVar R_Ip6ConfigManualAddress @R_Temp_Ip6ConfigManualAddress
+
+Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigManualAddress,&@R_Status"
+GetAck
+set assert [VerifyReturnStatus R_Status $EFI_ACCESS_DENIED]
+RecordAssertion $assert $Ip6ConfigSetDataConf7AssertionGuid001 \
+ "Ip6Config.SetData - Call SetData to set manual address with valid parameter before the former setting finishes." \
+ "ReturnStatus - $R_Status, ExpectedStatus - $EFI_ACCESS_DENIED"
+
+
+#
+# Make sure the former configurations succeeds
+# (Eliminate the side-effect to other cases)
+#
+set i 0
+set L_TimeOut 30
+Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigManualAddress,&@R_Status"
+GetAck
+GetVar R_Status
+set assert pass
+while { $R_Status == $EFI_NOT_READY } {
+ Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigManualAddress,&@R_Status"
+ GetAck
+ GetVar R_Status
+ if { $R_Status == $EFI_SUCCESS } {
+ break
+ } elseif { $i == $L_TimeOut } {
+ set assert fail
+
+ RecordAssertion $assert $GenericAssertionGuid \
+ "Ip6Config.SetData - former SetData finishes." \
+ "TimeUsed - $i, TimeOut Value- $L_TimeOut"
+ SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
+ Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
+ GetAck
+ BS->CloseEvent {@R_DoneEvent,&@R_Status}
+ GetAck
+ SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
+ Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
+ GetAck
+ BS->CloseEvent {@R_DoneEvent1,&@R_Status}
+ GetAck
+ EndScope _IP6CONFIG_SETDATA_CONF7
+ EndLog
+ return
+ }
+ incr i
+ Stall 1
+}
+RecordAssertion $assert $GenericAssertionGuid \
+ "Ip6Config.SetData - former SetData finishes." \
+ "TimeUsed - $i, TimeOut Value- $L_TimeOut"
+
+#
+# Set automatic policy (this will clean up all address information configured)
+#
+SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
+SetVar R_Ip6ConfigDataSize [Sizeof UINT32]
+SetVar R_Ip6ConfigPolicy $IP6CP(Automatic)
+
+SetVar R_Context 0
+
+Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_Status"
+GetAck
+GetVar R_Status
+if { $R_Status == $EFI_SUCCESS } {
+ set assert pass
+} elseif { $R_Status == $EFI_NOT_READY } {
+ set i 0
+ set L_TimeOut 30
+ set assert pass
+ while { 1 > 0 } {
+ GetVar R_Context
+ if { $R_Context == 1 } {
+ break
+ } elseif { $i == $L_TimeOut } {
+ set assert fail
+
+ RecordAssertion $assert $GenericAssertionGuid \
+ "Ip6Config.SetData - Set automatic policy to clean up the former configuration." \
+ "TimeUsed - $i, TimeOut Value- $L_TimeOut"
+ SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
+ Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
+ GetAck
+ BS->CloseEvent {@R_DoneEvent,&@R_Status}
+ GetAck
+ SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
+ Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
+ GetAck
+ BS->CloseEvent {@R_DoneEvent1,&@R_Status}
+ GetAck
+
+ EndScope _IP6CONFIG_SETDATA_CONF7
+ EndLog
+ return
+ }
+ incr i
+ Stall 1
+ }
+} else {
+ set assert fail
+
+ RecordAssertion $assert $GenericAssertionGuid \
+ "Ip6Config.SetData - Set automatic policy to clean up the former configuration." \
+ "TimeUsed - $i, TimeOut Value- $L_TimeOut"
+ SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
+ Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
+ GetAck
+ BS->CloseEvent {@R_DoneEvent,&@R_Status}
+ GetAck
+ SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
+ Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
+ GetAck
+ BS->CloseEvent {@R_DoneEvent1,&@R_Status}
+ GetAck
+
+ EndScope _IP6CONFIG_SETDATA_CONF7
+ EndLog
+ return
+}
+
+Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_Status"
+GetAck
+GetVar R_Ip6ConfigPolicy
+if { $R_Ip6ConfigPolicy == $IP6CP(Automatic) } {
+ set assert pass
+} else {
+ set assert fail
+
+ RecordAssertion $assert $GenericAssertionGuid \
+ "Ip6Config.SetData - Set automatic policy to clean up the former configuration." \
+ "TimeUsed - $i, TimeOut Value- $L_TimeOut"
+ SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
+ Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
+ GetAck
+ BS->CloseEvent {@R_DoneEvent,&@R_Status}
+ GetAck
+ SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
+ Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
+ GetAck
+ BS->CloseEvent {@R_DoneEvent1,&@R_Status}
+ GetAck
+
+ EndScope _IP6CONFIG_SETDATA_CONF7
+ EndLog
+
+ return
+}
+
+RecordAssertion $assert $GenericAssertionGuid \
+ "Ip6Config.SetData - Set automatic policy to clean up the former configuration." \
+ "TimeUsed - $i, TimeOut Value- $L_TimeOut"
+
+
+#
+# Clean up
+#
+SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
+Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
+GetAck
+set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
+RecordAssertion $assert $GenericAssertionGuid \
+ "Ip6Config.UnregisterDataNotify - Unregister notification event for configuration." \
+ "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
+
+BS->CloseEvent {@R_DoneEvent,&@R_Status}
+GetAck
+
+SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
+Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
+GetAck
+set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
+RecordAssertion $assert $GenericAssertionGuid \
+ "Ip6Config.UnregisterDataNotify - Unregister notification event for configuration." \
+ "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
+
+BS->CloseEvent {@R_DoneEvent1,&@R_Status}
+GetAck
+
+EndScope _IP6CONFIG_SETDATA_CONF7
+
+EndLog
+
diff --git a/uefi-sct/EMS/Bin/TestCase/IP6Config/SetData.Func1.Case1.tcl b/uefi-sct/EMS/Bin/TestCase/IP6Config/SetData.Func1.Case1.tcl
index 2053775..d35f104 100644
--- a/uefi-sct/EMS/Bin/TestCase/IP6Config/SetData.Func1.Case1.tcl
+++ b/uefi-sct/EMS/Bin/TestCase/IP6Config/SetData.Func1.Case1.tcl
@@ -1,274 +1,274 @@
-#
-# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
-# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
-#
-# This program and the accompanying materials
-# are licensed and made available under the terms and conditions of the BSD License
-# which accompanies this distribution. The full text of the license may be found at
-# http://opensource.org/licenses/bsd-license.php
-#
-# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
-# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-#
-################################################################################
-CaseLevel FUNCTION
-CaseAttribute AUTO
-CaseVerboseLevel DEFAULT
-set reportfile report.csv
-
-#
-# test case Name, category, description, GUID...
-#
-CaseGuid EF8FF5B4-8855-4fbd-87C5-C28C7312302A
-CaseName SetData.Func1.Case1
-CaseCategory IP6Config
-CaseDescription {SetData must succeed with valid parameters.}
-
-################################################################################
-Include IP6Config/Include/Ip6Config.inc.tcl
-
-
-#
-# Begin log ...
-#
-BeginLog
-
-#
-# BeginScope
-#
-BeginScope _IP6CONFIG_SETDATA_FUNC1
-
-#
-# Parameter Definition
-# R_ represents "Remote EFI Side Parameter"
-# L_ represents "Local ENTS Side Parameter"
-#
-UINTN R_Status
-UINTN R_Context
-UINTN R_Context1
-UINTN R_DoneEvent
-UINTN R_DoneEvent1
-UINTN R_Ip6ConfigDataSize
-UINT32 R_Ip6ConfigDataType
-EFI_IP6_CONFIG_INTERFACE_INFO R_Ip6ConfigInterfaceInfo
-EFI_IP6_CONFIG_INTERFACE_ID R_Ip6ConfigInterfaceId
-UINT32 R_Ip6ConfigPolicy
-EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS R_Ip6ConfigDadTransmits
-
-#
-# Check Point: Call Ip6Config->SetData to set AltInterfaceId
-#
-SetVar R_Ip6ConfigDataType $IP6CDT(AltInterfaceId)
-SetVar R_Ip6ConfigDataSize [Sizeof EFI_IP6_CONFIG_INTERFACE_ID]
-SetVar R_Ip6ConfigInterfaceId.Id(0) 0
-SetVar R_Ip6ConfigInterfaceId.Id(1) 1
-SetVar R_Ip6ConfigInterfaceId.Id(2) 2
-SetVar R_Ip6ConfigInterfaceId.Id(3) 3
-SetVar R_Ip6ConfigInterfaceId.Id(4) 4
-SetVar R_Ip6ConfigInterfaceId.Id(5) 5
-SetVar R_Ip6ConfigInterfaceId.Id(6) 6
-SetVar R_Ip6ConfigInterfaceId.Id(7) 7
-
-SetVar R_Context 0
-BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context,\
- &@R_DoneEvent, &@R_Status"
-GetAck
-set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
-RecordAssertion $assert $GenericAssertionGuid \
- "BS.CreateEvent." \
- "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
-
-Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
-GetAck
-set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
-RecordAssertion $assert $GenericAssertionGuid \
- "Ip6Config.RegisterDataNotify - Register notification event for configuration." \
- "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
-
-Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigInterfaceId,&@R_Status"
-GetAck
-GetVar R_Status
-if { $R_Status == $EFI_SUCCESS } {
- set assert pass
- RecordAssertion $assert $Ip6ConfigSetDataFunc1AssertionGuid001 \
- "Ip6Config.SetData - Call SetData to set AltInterfaceId." \
- "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
-} elseif { $R_Status == $EFI_NOT_READY } {
- set i 0
- set L_TimeOut 30
- while { 1 > 0 } {
- GetVar R_Context
- if { $R_Context == 1 } {
- break
- } elseif { $i == $L_TimeOut } {
- set assert fail
- RecordAssertion $assert $Ip6ConfigSetDataFunc1AssertionGuid001 \
- "SetData failed.(event hasn't been signaled before TIMEOUT)." \
- "TIMEOUT value is $L_TimeOut (sec), "
-
- SetVar R_Ip6ConfigDataType $IP6CDT(AltInterfaceId)
- Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
- GetAck
- BS->CloseEvent {@R_DoneEvent,&@R_Status}
- GetAck
- EndScope _IP6CONFIG_SETDATA_FUNC1
- EndLog
- return
- }
- incr i
- Stall 1
- }
-} else {
- set assert fail
- RecordAssertion $assert $Ip6ConfigSetDataFunc1AssertionGuid001 \
- "Ip6Config.SetData - Call SetData to set AltInterfaceId." \
- "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
-
-
- SetVar R_Ip6ConfigDataType $IP6CDT(AltInterfaceId)
- Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
- GetAck
- BS->CloseEvent {@R_DoneEvent,&@R_Status}
- GetAck
- EndScope _IP6CONFIG_SETDATA_FUNC1
- EndLog
- return
-}
-
-Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigInterfaceId,&@R_Status"
-GetAck
-set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
-RecordAssertion $assert $GenericAssertionGuid \
- "Ip6Config.GetData - Call GetData to get AltInterfaceId value." \
- "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
-GetVar R_Ip6ConfigInterfaceId
-if { ${R_Ip6ConfigInterfaceId.Id(0)} == 0 && ${R_Ip6ConfigInterfaceId.Id(1)} == 1 && ${R_Ip6ConfigInterfaceId.Id(2)} == 2 && ${R_Ip6ConfigInterfaceId.Id(3)} == 3 && ${R_Ip6ConfigInterfaceId.Id(4)} == 4 && ${R_Ip6ConfigInterfaceId.Id(5)} == 5 && ${R_Ip6ConfigInterfaceId.Id(6)} == 6 && ${R_Ip6ConfigInterfaceId.Id(7)} == 7} {
- set assert pass
-} else {
- set assert fail
-}
-RecordAssertion $assert $Ip6ConfigSetDataFunc1AssertionGuid002 \
- "Set AltInterfaceId succeeds(event is signaled correctly and data correct)."
-
-#
-# Check Point: Call Ip6Config->SetData to set DadXmits
-#
-SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
-SetVar R_Ip6ConfigDataSize [Sizeof EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS]
-SetVar R_Ip6ConfigDadTransmits.DupAddrDetectTransmits 3
-
-SetVar R_Context1 0
-BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context1,\
- &@R_DoneEvent1, &@R_Status"
-GetAck
-set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
-RecordAssertion $assert $GenericAssertionGuid \
- "BS.CreateEvent." \
- "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
-
-Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
-GetAck
-set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
-RecordAssertion $assert $GenericAssertionGuid \
- "Ip6Config.RegisterDataNotify - Register notification event for configuration." \
- "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
-
-Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigDadTransmits,&@R_Status"
-GetAck
-GetVar R_Status
-if { $R_Status == $EFI_SUCCESS } {
- set assert pass
- RecordAssertion $assert $Ip6ConfigSetDataFunc1AssertionGuid003 \
- "Ip6Config.SetData - Call SetData to set DadXmits." \
- "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
-} elseif { $R_Status == $EFI_NOT_READY } {
- set i 0
- set L_TimeOut 30
- while { 1 > 0 } {
- GetVar R_Context1
- if { $R_Context1 == 1 } {
- break
- } elseif { $i == $L_TimeOut } {
- set assert fail
- RecordAssertion $assert $Ip6ConfigSetDataFunc1AssertionGuid003 \
- "SetData failed.(event hasn't been signaled before TIMEOUT)." \
- "TIMEOUT value is $L_TimeOut (sec), "
-
- SetVar R_Ip6ConfigDataType $IP6CDT(AltInterfaceId)
- Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
- GetAck
- BS->CloseEvent {@R_DoneEvent,&@R_Status}
- GetAck
- SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
- Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
- GetAck
- BS->CloseEvent {@R_DoneEvent1,&@R_Status}
- GetAck
- EndScope _IP6CONFIG_SETDATA_FUNC1
- EndLog
- return
- }
- incr i
- Stall 1
- }
-} else {
- set assert fail
- RecordAssertion $assert $Ip6ConfigSetDataFunc1AssertionGuid003 \
- "Ip6Config.SetData - Call SetData to set manual DadXmits." \
- "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
-
- SetVar R_Ip6ConfigDataType $IP6CDT(AltInterfaceId)
- Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
- GetAck
- BS->CloseEvent {@R_DoneEvent,&@R_Status}
- GetAck
- SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
- Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
- GetAck
- BS->CloseEvent {@R_DoneEvent1,&@R_Status}
- GetAck
- EndScope _IP6CONFIG_SETDATA_FUNC1
- EndLog
-}
-
-Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigDadTransmits,&@R_Status"
-GetAck
-set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
-RecordAssertion $assert $GenericAssertionGuid \
- "Ip6Config.GetData - Call GetData to get DadXmits value." \
- "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
-GetVar R_Ip6ConfigDadTransmits
-if { ${R_Ip6ConfigDadTransmits.DupAddrDetectTransmits} == 3 } {
- set assert pass
-} else {
- set assert fail
-}
-RecordAssertion $assert $Ip6ConfigSetDataFunc1AssertionGuid004 \
- "Set DadXmits succeeds(event is signaled correctly and data correct)."
-
-#
-# Clean up
-#
-SetVar R_Ip6ConfigDataType $IP6CDT(AltInterfaceId)
-Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
-GetAck
-set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
-RecordAssertion $assert $GenericAssertionGuid \
- "Ip6Config.UnregisterDataNotify - Unregister notification event for configuration." \
- "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
-BS->CloseEvent {@R_DoneEvent,&@R_Status}
-GetAck
-
-SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
-Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
-GetAck
-set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
-RecordAssertion $assert $GenericAssertionGuid \
- "Ip6Config.UnregisterDataNotify - Unregister notification event for configuration." \
- "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
-BS->CloseEvent {@R_DoneEvent1,&@R_Status}
-GetAck
-
-EndScope _IP6CONFIG_SETDATA_FUNC1
-
+#
+# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
+# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
+#
+# This program and the accompanying materials
+# are licensed and made available under the terms and conditions of the BSD License
+# which accompanies this distribution. The full text of the license may be found at
+# http://opensource.org/licenses/bsd-license.php
+#
+# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+#
+################################################################################
+CaseLevel FUNCTION
+CaseAttribute AUTO
+CaseVerboseLevel DEFAULT
+set reportfile report.csv
+
+#
+# test case Name, category, description, GUID...
+#
+CaseGuid EF8FF5B4-8855-4fbd-87C5-C28C7312302A
+CaseName SetData.Func1.Case1
+CaseCategory IP6Config
+CaseDescription {SetData must succeed with valid parameters.}
+
+################################################################################
+Include IP6Config/Include/Ip6Config.inc.tcl
+
+
+#
+# Begin log ...
+#
+BeginLog
+
+#
+# BeginScope
+#
+BeginScope _IP6CONFIG_SETDATA_FUNC1
+
+#
+# Parameter Definition
+# R_ represents "Remote EFI Side Parameter"
+# L_ represents "Local ENTS Side Parameter"
+#
+UINTN R_Status
+UINTN R_Context
+UINTN R_Context1
+UINTN R_DoneEvent
+UINTN R_DoneEvent1
+UINTN R_Ip6ConfigDataSize
+UINT32 R_Ip6ConfigDataType
+EFI_IP6_CONFIG_INTERFACE_INFO R_Ip6ConfigInterfaceInfo
+EFI_IP6_CONFIG_INTERFACE_ID R_Ip6ConfigInterfaceId
+UINT32 R_Ip6ConfigPolicy
+EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS R_Ip6ConfigDadTransmits
+
+#
+# Check Point: Call Ip6Config->SetData to set AltInterfaceId
+#
+SetVar R_Ip6ConfigDataType $IP6CDT(AltInterfaceId)
+SetVar R_Ip6ConfigDataSize [Sizeof EFI_IP6_CONFIG_INTERFACE_ID]
+SetVar R_Ip6ConfigInterfaceId.Id(0) 0
+SetVar R_Ip6ConfigInterfaceId.Id(1) 1
+SetVar R_Ip6ConfigInterfaceId.Id(2) 2
+SetVar R_Ip6ConfigInterfaceId.Id(3) 3
+SetVar R_Ip6ConfigInterfaceId.Id(4) 4
+SetVar R_Ip6ConfigInterfaceId.Id(5) 5
+SetVar R_Ip6ConfigInterfaceId.Id(6) 6
+SetVar R_Ip6ConfigInterfaceId.Id(7) 7
+
+SetVar R_Context 0
+BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context,\
+ &@R_DoneEvent, &@R_Status"
+GetAck
+set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
+RecordAssertion $assert $GenericAssertionGuid \
+ "BS.CreateEvent." \
+ "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
+
+Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
+GetAck
+set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
+RecordAssertion $assert $GenericAssertionGuid \
+ "Ip6Config.RegisterDataNotify - Register notification event for configuration." \
+ "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
+
+Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigInterfaceId,&@R_Status"
+GetAck
+GetVar R_Status
+if { $R_Status == $EFI_SUCCESS } {
+ set assert pass
+ RecordAssertion $assert $Ip6ConfigSetDataFunc1AssertionGuid001 \
+ "Ip6Config.SetData - Call SetData to set AltInterfaceId." \
+ "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
+} elseif { $R_Status == $EFI_NOT_READY } {
+ set i 0
+ set L_TimeOut 30
+ while { 1 > 0 } {
+ GetVar R_Context
+ if { $R_Context == 1 } {
+ break
+ } elseif { $i == $L_TimeOut } {
+ set assert fail
+ RecordAssertion $assert $Ip6ConfigSetDataFunc1AssertionGuid001 \
+ "SetData failed.(event hasn't been signaled before TIMEOUT)." \
+ "TIMEOUT value is $L_TimeOut (sec), "
+
+ SetVar R_Ip6ConfigDataType $IP6CDT(AltInterfaceId)
+ Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
+ GetAck
+ BS->CloseEvent {@R_DoneEvent,&@R_Status}
+ GetAck
+ EndScope _IP6CONFIG_SETDATA_FUNC1
+ EndLog
+ return
+ }
+ incr i
+ Stall 1
+ }
+} else {
+ set assert fail
+ RecordAssertion $assert $Ip6ConfigSetDataFunc1AssertionGuid001 \
+ "Ip6Config.SetData - Call SetData to set AltInterfaceId." \
+ "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
+
+
+ SetVar R_Ip6ConfigDataType $IP6CDT(AltInterfaceId)
+ Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
+ GetAck
+ BS->CloseEvent {@R_DoneEvent,&@R_Status}
+ GetAck
+ EndScope _IP6CONFIG_SETDATA_FUNC1
+ EndLog
+ return
+}
+
+Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigInterfaceId,&@R_Status"
+GetAck
+set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
+RecordAssertion $assert $GenericAssertionGuid \
+ "Ip6Config.GetData - Call GetData to get AltInterfaceId value." \
+ "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
+GetVar R_Ip6ConfigInterfaceId
+if { ${R_Ip6ConfigInterfaceId.Id(0)} == 0 && ${R_Ip6ConfigInterfaceId.Id(1)} == 1 && ${R_Ip6ConfigInterfaceId.Id(2)} == 2 && ${R_Ip6ConfigInterfaceId.Id(3)} == 3 && ${R_Ip6ConfigInterfaceId.Id(4)} == 4 && ${R_Ip6ConfigInterfaceId.Id(5)} == 5 && ${R_Ip6ConfigInterfaceId.Id(6)} == 6 && ${R_Ip6ConfigInterfaceId.Id(7)} == 7} {
+ set assert pass
+} else {
+ set assert fail
+}
+RecordAssertion $assert $Ip6ConfigSetDataFunc1AssertionGuid002 \
+ "Set AltInterfaceId succeeds(event is signaled correctly and data correct)."
+
+#
+# Check Point: Call Ip6Config->SetData to set DadXmits
+#
+SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
+SetVar R_Ip6ConfigDataSize [Sizeof EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS]
+SetVar R_Ip6ConfigDadTransmits.DupAddrDetectTransmits 3
+
+SetVar R_Context1 0
+BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context1,\
+ &@R_DoneEvent1, &@R_Status"
+GetAck
+set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
+RecordAssertion $assert $GenericAssertionGuid \
+ "BS.CreateEvent." \
+ "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
+
+Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
+GetAck
+set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
+RecordAssertion $assert $GenericAssertionGuid \
+ "Ip6Config.RegisterDataNotify - Register notification event for configuration." \
+ "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
+
+Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigDadTransmits,&@R_Status"
+GetAck
+GetVar R_Status
+if { $R_Status == $EFI_SUCCESS } {
+ set assert pass
+ RecordAssertion $assert $Ip6ConfigSetDataFunc1AssertionGuid003 \
+ "Ip6Config.SetData - Call SetData to set DadXmits." \
+ "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
+} elseif { $R_Status == $EFI_NOT_READY } {
+ set i 0
+ set L_TimeOut 30
+ while { 1 > 0 } {
+ GetVar R_Context1
+ if { $R_Context1 == 1 } {
+ break
+ } elseif { $i == $L_TimeOut } {
+ set assert fail
+ RecordAssertion $assert $Ip6ConfigSetDataFunc1AssertionGuid003 \
+ "SetData failed.(event hasn't been signaled before TIMEOUT)." \
+ "TIMEOUT value is $L_TimeOut (sec), "
+
+ SetVar R_Ip6ConfigDataType $IP6CDT(AltInterfaceId)
+ Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
+ GetAck
+ BS->CloseEvent {@R_DoneEvent,&@R_Status}
+ GetAck
+ SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
+ Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
+ GetAck
+ BS->CloseEvent {@R_DoneEvent1,&@R_Status}
+ GetAck
+ EndScope _IP6CONFIG_SETDATA_FUNC1
+ EndLog
+ return
+ }
+ incr i
+ Stall 1
+ }
+} else {
+ set assert fail
+ RecordAssertion $assert $Ip6ConfigSetDataFunc1AssertionGuid003 \
+ "Ip6Config.SetData - Call SetData to set manual DadXmits." \
+ "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
+
+ SetVar R_Ip6ConfigDataType $IP6CDT(AltInterfaceId)
+ Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
+ GetAck
+ BS->CloseEvent {@R_DoneEvent,&@R_Status}
+ GetAck
+ SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
+ Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
+ GetAck
+ BS->CloseEvent {@R_DoneEvent1,&@R_Status}
+ GetAck
+ EndScope _IP6CONFIG_SETDATA_FUNC1
+ EndLog
+}
+
+Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigDadTransmits,&@R_Status"
+GetAck
+set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
+RecordAssertion $assert $GenericAssertionGuid \
+ "Ip6Config.GetData - Call GetData to get DadXmits value." \
+ "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
+GetVar R_Ip6ConfigDadTransmits
+if { ${R_Ip6ConfigDadTransmits.DupAddrDetectTransmits} == 3 } {
+ set assert pass
+} else {
+ set assert fail
+}
+RecordAssertion $assert $Ip6ConfigSetDataFunc1AssertionGuid004 \
+ "Set DadXmits succeeds(event is signaled correctly and data correct)."
+
+#
+# Clean up
+#
+SetVar R_Ip6ConfigDataType $IP6CDT(AltInterfaceId)
+Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
+GetAck
+set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
+RecordAssertion $assert $GenericAssertionGuid \
+ "Ip6Config.UnregisterDataNotify - Unregister notification event for configuration." \
+ "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
+BS->CloseEvent {@R_DoneEvent,&@R_Status}
+GetAck
+
+SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
+Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
+GetAck
+set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
+RecordAssertion $assert $GenericAssertionGuid \
+ "Ip6Config.UnregisterDataNotify - Unregister notification event for configuration." \
+ "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
+BS->CloseEvent {@R_DoneEvent1,&@R_Status}
+GetAck
+
+EndScope _IP6CONFIG_SETDATA_FUNC1
+
EndLog
\ No newline at end of file
diff --git a/uefi-sct/EMS/Bin/TestCase/IP6Config/SetData.Func2.Case1.tcl b/uefi-sct/EMS/Bin/TestCase/IP6Config/SetData.Func2.Case1.tcl
new file mode 100644
index 0000000..4d9ec42
--- /dev/null
+++ b/uefi-sct/EMS/Bin/TestCase/IP6Config/SetData.Func2.Case1.tcl
@@ -0,0 +1,838 @@
+#
+# Copyright (c) 2018, Intel Corporation. All rights reserved.<BR>
+#
+# This program and the accompanying materials
+# are licensed and made available under the terms and conditions of the BSD License
+# which accompanies this distribution. The full text of the license may be found at
+# http://opensource.org/licenses/bsd-license.php
+#
+# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+#
+################################################################################
+CaseLevel CONFORMANCE
+CaseAttribute AUTO
+CaseVerboseLevel DEFAULT
+set reportfile report.csv
+
+#
+# test case Name, category, description, GUID...
+#
+CaseGuid 79F40434-2684-459C-8EEB-DCFB822D93F7
+CaseName SetData.Func2.Case1
+CaseCategory IP6Config
+CaseDescription {SetData to clear the configuration.}
+
+################################################################################
+Include IP6Config/Include/Ip6Config.inc.tcl
+
+#
+# Begin log ...
+#
+BeginLog
+
+#
+# BeginScope
+#
+BeginScope _IP6CONFIG_SETDATA_FUNC2
+
+#
+# Parameter Definition
+# R_ represents "Remote EFI Side Parameter"
+# L_ represents "Local ENTS Side Parameter"
+#
+UINTN R_Status
+UINTN R_Context
+UINTN R_DoneEvent
+UINTN R_Ip6ConfigDataSize
+UINT32 R_Ip6ConfigDataType
+EFI_IP6_CONFIG_INTERFACE_INFO R_Ip6ConfigInterfaceInfo
+EFI_IP6_CONFIG_INTERFACE_ID R_Ip6ConfigInterfaceId
+UINT32 R_Ip6ConfigPolicy
+EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS R_Ip6ConfigDadTransmits
+
+#
+# Check Point: Call Ip6Config->SetData to set manual policy
+#
+SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
+SetVar R_Ip6ConfigDataSize [Sizeof UINT32]
+SetVar R_Ip6ConfigPolicy $IP6CP(Manual)
+
+SetVar R_Context 0
+BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context,\
+ &@R_DoneEvent, &@R_Status"
+GetAck
+set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
+RecordAssertion $assert $GenericAssertionGuid \
+ "BS.CreateEvent." \
+ "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
+
+Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
+GetAck
+set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
+RecordAssertion $assert $GenericAssertionGuid \
+ "Ip6Config.RegisterDataNotify - Register notification event for configuration." \
+ "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
+
+Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_Status"
+GetAck
+GetVar R_Status
+if { $R_Status == $EFI_SUCCESS } {
+ set assert pass
+ RecordAssertion $assert $GenericAssertionGuid \
+ "Ip6Config.SetData - Call SetData to set manual policy." \
+ "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
+} elseif { $R_Status == $EFI_NOT_READY } {
+ set i 0
+ set L_TimeOut 30
+ while { 1 > 0 } {
+ GetVar R_Context
+ if { $R_Context == 1 } {
+ break
+ } elseif { $i == $L_TimeOut } {
+ set assert fail
+ RecordAssertion $assert $GenericAssertionGuid \
+ "SetData failed.(event hasn't been signaled before TIMEOUT)." \
+ "TIMEOUT value is $L_TimeOut (sec), "
+
+ SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
+ Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
+ GetAck
+ BS->CloseEvent {@R_DoneEvent,&@R_Status}
+ GetAck
+ EndScope _IP6CONFIG_SETDATA_FUNC2
+ EndLog
+ return
+ }
+ incr i
+ Stall 1
+ }
+} else {
+ set assert fail
+ RecordAssertion $assert $GenericAssertionGuid \
+ "Ip6Config.SetData - Call SetData to set manual policy." \
+ "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
+
+ SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
+ Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
+ GetAck
+ BS->CloseEvent {@R_DoneEvent,&@R_Status}
+ GetAck
+ EndScope _IP6CONFIG_SETDATA_FUNC2
+ EndLog
+ return
+}
+
+SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
+Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
+GetAck
+BS->CloseEvent {@R_DoneEvent,&@R_Status}
+GetAck
+
+Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_Status"
+GetAck
+set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
+RecordAssertion $assert $GenericAssertionGuid \
+ "Ip6Config.GetData - Call GetData to get policy value." \
+ "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
+GetVar R_Ip6ConfigPolicy
+if { $R_Ip6ConfigPolicy == $IP6CP(Manual) } {
+ set assert pass
+} else {
+ set assert fail
+
+ RecordAssertion $assert $GenericAssertionGuid \
+ "Set manual policy fails(event is signaled correctly but data is incorrect)."
+ EndScope _IP6CONFIG_SETDATA_FUNC2
+ EndLog
+ return
+}
+RecordAssertion $assert $GenericAssertionGuid \
+ "Set manual policy succeeds(event is signaled correctly and data correct)."
+
+#
+# Check Point: Call Ip6Config->SetData to set DadXmits 20
+#
+SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
+SetVar R_Ip6ConfigDataSize [Sizeof EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS]
+SetVar R_Ip6ConfigDadTransmits.DupAddrDetectTransmits 20
+
+SetVar R_Context 0
+BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context,\
+ &@R_DoneEvent, &@R_Status"
+GetAck
+set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
+RecordAssertion $assert $GenericAssertionGuid \
+ "BS.CreateEvent." \
+ "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
+
+Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
+GetAck
+set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
+RecordAssertion $assert $GenericAssertionGuid \
+ "Ip6Config.RegisterDataNotify - Register notification event for configuration." \
+ "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
+
+Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigDadTransmits,&@R_Status"
+GetAck
+GetVar R_Status
+if { $R_Status == $EFI_SUCCESS } {
+ set assert pass
+ RecordAssertion $assert $GenericAssertionGuid \
+ "Ip6Config.SetData - Call SetData to set DadXmits 20." \
+ "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
+} elseif { $R_Status == $EFI_NOT_READY } {
+ set i 0
+ set L_TimeOut 30
+ while { 1 > 0 } {
+ GetVar R_Context
+ if { $R_Context == 1 } {
+ break
+ } elseif { $i == $L_TimeOut } {
+ set assert fail
+ RecordAssertion $assert $GenericAssertionGuid \
+ "SetData failed.(event hasn't been signaled before TIMEOUT)." \
+ "TIMEOUT value is $L_TimeOut (sec), "
+
+ SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
+ Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
+ GetAck
+ BS->CloseEvent {@R_DoneEvent,&@R_Status}
+ GetAck
+ EndScope _IP6CONFIG_SETDATA_FUNC2
+ EndLog
+ return
+ }
+ incr i
+ Stall 1
+ }
+} else {
+ set assert fail
+ RecordAssertion $assert $GenericAssertionGuid \
+ "Ip6Config.SetData - Call SetData to set DadXmits 20." \
+ "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
+
+ SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
+ Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
+ GetAck
+ BS->CloseEvent {@R_DoneEvent,&@R_Status}
+ GetAck
+ EndScope _IP6CONFIG_SETDATA_FUNC2
+ EndLog
+ return
+}
+
+SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
+Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
+GetAck
+BS->CloseEvent {@R_DoneEvent,&@R_Status}
+GetAck
+
+Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigDadTransmits,&@R_Status"
+GetAck
+set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
+RecordAssertion $assert $GenericAssertionGuid \
+ "Ip6Config.GetData - Call GetData to get DadXmits value." \
+ "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
+GetVar R_Ip6ConfigDadTransmits.DupAddrDetectTransmits
+if { ${R_Ip6ConfigDadTransmits.DupAddrDetectTransmits} == 20 } {
+ set assert pass
+} else {
+ set assert fail
+
+ RecordAssertion $assert $GenericAssertionGuid \
+ "Set DadXmits fails(event is signaled correctly but data is incorrect)."
+
+ EndScope _IP6CONFIG_SETDATA_FUNC2
+ EndLog
+ return
+}
+RecordAssertion $assert $GenericAssertionGuid \
+ "Set DadXmits succeeds(event is signaled correctly and data correct)."
+
+Stall 30
+
+#
+# Check Point : Set Manual Address with valid parameter
+#
+
+EFI_IP6_CONFIG_MANUAL_ADDRESS R_Temp_Ip6ConfigManualAddress
+
+set L_ManualListLen 1
+EFI_IP6_CONFIG_MANUAL_ADDRESS R_Ip6ConfigManualAddress
+set L_UnitLen [Sizeof EFI_IP6_CONFIG_MANUAL_ADDRESS]
+set L_ListLen [expr {$L_UnitLen * $L_ManualListLen}]
+SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
+SetVar R_Ip6ConfigDataSize $L_ListLen
+SetVar R_Temp_Ip6ConfigManualAddress.IsAnycast FALSE
+SetVar R_Temp_Ip6ConfigManualAddress.PrefixLength 64
+SetIpv6Address R_Temp_Ip6ConfigManualAddress.Address "2002::5000"
+SetVar R_Ip6ConfigManualAddress @R_Temp_Ip6ConfigManualAddress
+
+SetVar R_Context 0
+BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context,\
+ &@R_DoneEvent, &@R_Status"
+GetAck
+set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
+RecordAssertion $assert $GenericAssertionGuid \
+ "BS.CreateEvent." \
+ "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
+
+Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
+GetAck
+set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
+RecordAssertion $assert $GenericAssertionGuid \
+ "Ip6Config.RegisterDataNotify - Register notification event for configuration." \
+ "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
+
+Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigManualAddress,&@R_Status"
+GetAck
+GetVar R_Status
+if { $R_Status == $EFI_SUCCESS } {
+ set assert pass
+ RecordAssertion $assert $Ip6ConfigSetDataFunc2AssertionGuid001 \
+ "Ip6Config.SetData - Call SetData to set MANUAL ADDRESS." \
+ "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
+} elseif { $R_Status == $EFI_NOT_READY } {
+ set i 0
+ set L_TimeOut 30
+ while { 1 > 0 } {
+ GetVar R_Context
+ if { $R_Context == 1 } {
+ break
+ } elseif { $i == $L_TimeOut } {
+ set assert fail
+ RecordAssertion $assert $Ip6ConfigSetDataFunc2AssertionGuid001 \
+ "SetData to set MANUAL ADDRESS fail.(event hasn't been signaled before TIMEOUT)." \
+ "TIMEOUT value is $L_TimeOut (sec), "
+
+ SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
+ Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
+ GetAck
+ BS->CloseEvent {@R_DoneEvent,&@R_Status}
+ GetAck
+ EndScope _IP6CONFIG_SETDATA_FUNC2
+ EndLog
+ return
+ }
+ incr i
+ Stall 1
+ }
+} else {
+ set assert fail
+ RecordAssertion $assert $Ip6ConfigSetDataFunc2AssertionGuid001 \
+ "Ip6Config.SetData - Call SetData to set MANUAL ADDRESS." \
+ "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
+
+ SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
+ Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
+ GetAck
+ BS->CloseEvent {@R_DoneEvent,&@R_Status}
+ GetAck
+ EndScope _IP6CONFIG_SETDATA_FUNC2
+ EndLog
+ return
+}
+
+SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
+Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
+GetAck
+BS->CloseEvent {@R_DoneEvent,&@R_Status}
+GetAck
+
+Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigManualAddress,&@R_Status"
+GetAck
+set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
+RecordAssertion $assert $GenericAssertionGuid \
+ "Ip6Config.GetData - Call GetData to get Manual Address." \
+ "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
+
+GetVar R_Ip6ConfigManualAddress
+
+set L_Proc_Ipv6Address [GetIpv6Address {R_Ip6ConfigManualAddress.Address}]
+if { [string compare $L_Proc_Ipv6Address 2002:0000:0000:0000:0000:0000:0000:5000] != 0 } {
+ puts $L_Proc_Ipv6Address
+ set assert fail
+
+ RecordAssertion $assert $Ip6ConfigSetDataFunc2AssertionGuid002 \
+ "Ip6Config.SetData - Set Gateway fail(event is signaled correctly but data is incorrect.)"
+} elseif {${R_Ip6ConfigManualAddress.PrefixLength} != 64} {
+ set assert fail
+
+ RecordAssertion $assert $Ip6ConfigSetDataFunc2AssertionGuid002 \
+ "Ip6Config.SetData - Set Gateway fail(event is signaled correctly but data is incorrect.)"
+
+} elseif {${R_Ip6ConfigManualAddress.IsAnycast} != false} {
+ set assert fail
+
+ RecordAssertion $assert $Ip6ConfigSetDataFunc2AssertionGuid002 \
+ "Ip6Config.SetData - Set Gateway fail(event is signaled correctly but data is incorrect.)"
+
+} else {
+ RecordAssertion $assert $Ip6ConfigSetDataFunc2AssertionGuid002 \
+ "Ip6Config.SetData - Set Gateway success(event is signaled correctly and data is correct.)"
+}
+
+#
+# Clear the Manual Address
+#
+SetVar R_Context 0
+BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context,\
+ &@R_DoneEvent, &@R_Status"
+GetAck
+set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
+RecordAssertion $assert $GenericAssertionGuid \
+ "BS.CreateEvent." \
+ "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
+
+Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
+GetAck
+set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
+RecordAssertion $assert $GenericAssertionGuid \
+ "Ip6Config.RegisterDataNotify - Register notification event for configuration." \
+ "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
+
+Ip6Config->SetData "@R_Ip6ConfigDataType,0,NULL,&@R_Status"
+GetAck
+GetVar R_Status
+if { $R_Status == $EFI_SUCCESS } {
+ set assert pass
+ RecordAssertion $assert $Ip6ConfigSetDataFunc2AssertionGuid003 \
+ "Ip6Config.SetData - Call SetData to clear MANUAL ADDRESS." \
+ "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
+} elseif { $R_Status == $EFI_NOT_READY } {
+ set i 0
+ set L_TimeOut 30
+ while { 1 > 0 } {
+ GetVar R_Context
+ if { $R_Context == 1 } {
+ break
+ } elseif { $i == $L_TimeOut } {
+ set assert fail
+ RecordAssertion $assert $Ip6ConfigSetDataFunc2AssertionGuid003 \
+ "SetData to clear MANUAL ADDRESS fail.(event hasn't been signaled before TIMEOUT)." \
+ "TIMEOUT value is $L_TimeOut (sec), "
+
+ SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
+ Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
+ GetAck
+ BS->CloseEvent {@R_DoneEvent,&@R_Status}
+ GetAck
+ EndScope _IP6CONFIG_SETDATA_FUNC2
+ EndLog
+ return
+ }
+ incr i
+ Stall 1
+ }
+} else {
+ set assert fail
+ RecordAssertion $assert $Ip6ConfigSetDataFunc2AssertionGuid003 \
+ "Ip6Config.SetData - Call SetData to clear MANUAL ADDRESS." \
+ "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
+
+ SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
+ Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
+ GetAck
+ BS->CloseEvent {@R_DoneEvent,&@R_Status}
+ GetAck
+ EndScope _IP6CONFIG_SETDATA_FUNC2
+ EndLog
+ return
+}
+
+SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
+Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
+GetAck
+BS->CloseEvent {@R_DoneEvent,&@R_Status}
+GetAck
+
+Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigManualAddress,&@R_Status"
+GetAck
+set assert [VerifyReturnStatus R_Status $EFI_NOT_FOUND]
+RecordAssertion $assert $Ip6ConfigSetDataFunc2AssertionGuid004 \
+ "Ip6Config.GetData - Call GetData to get Manual Address." \
+ "ReturnStatus - $R_Status, ExpectedStatus - $EFI_NOT_FOUND"
+
+
+#
+# Check Point : Set Gateway with valid parameter
+#
+
+set L_GatewayListLen 1
+EFI_IPv6_ADDRESS R_Temp_Ip6ConfigGateway
+EFI_IPv6_ADDRESS R_Ip6ConfigGateway
+set L_UnitLen [Sizeof EFI_IPv6_ADDRESS]
+set L_ListLen [expr {$L_UnitLen * $L_GatewayListLen}]
+SetVar R_Ip6ConfigDataType $IP6CDT(Gateway)
+SetVar R_Ip6ConfigDataSize $L_ListLen
+
+SetIpv6Address R_Temp_Ip6ConfigGateway "2002::5001"
+SetVar R_Ip6ConfigGateway @R_Temp_Ip6ConfigGateway
+
+SetVar R_Context 0
+BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context,\
+ &@R_DoneEvent, &@R_Status"
+GetAck
+set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
+RecordAssertion $assert $GenericAssertionGuid \
+ "BS.CreateEvent." \
+ "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
+
+Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
+GetAck
+set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
+RecordAssertion $assert $GenericAssertionGuid \
+ "Ip6Config.RegisterDataNotify - Register notification event for configuration." \
+ "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
+
+Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigGateway,&@R_Status"
+GetAck
+GetVar R_Status
+if { $R_Status == $EFI_SUCCESS } {
+ set assert pass
+ RecordAssertion $assert $Ip6ConfigSetDataFunc2AssertionGuid005 \
+ "Ip6Config.SetData - Call SetData to set Gateway." \
+ "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
+} elseif { $R_Status == $EFI_NOT_READY } {
+ set i 0
+ set L_TimeOut 30
+ while { 1 > 0 } {
+ GetVar R_Context
+ if { $R_Context == 1 } {
+ break
+ } elseif { $i == $L_TimeOut } {
+ set assert fail
+ RecordAssertion $assert $Ip6ConfigSetDataFunc2AssertionGuid005 \
+ "SetData to set Gateway fail.(event hasn't been signaled before TIMEOUT)." \
+ "TIMEOUT value is $L_TimeOut (sec), "
+
+ SetVar R_Ip6ConfigDataType $IP6CDT(Gateway)
+ Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
+ GetAck
+ BS->CloseEvent {@R_DoneEvent,&@R_Status}
+ GetAck
+ EndScope _IP6CONFIG_SETDATA_FUNC2
+ EndLog
+ return
+ }
+ incr i
+ Stall 1
+ }
+} else {
+ set assert fail
+ RecordAssertion $assert $Ip6ConfigSetDataFunc2AssertionGuid005 \
+ "Ip6Config.SetData - Call SetData to set Gateway." \
+ "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
+
+ SetVar R_Ip6ConfigDataType $IP6CDT(Gateway)
+ Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
+ GetAck
+ BS->CloseEvent {@R_DoneEvent,&@R_Status}
+ GetAck
+ EndScope _IP6CONFIG_SETDATA_FUNC2
+ EndLog
+ return
+}
+
+SetVar R_Ip6ConfigDataType $IP6CDT(Gateway)
+Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
+GetAck
+BS->CloseEvent {@R_DoneEvent,&@R_Status}
+GetAck
+
+Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigGateway,&@R_Status"
+GetAck
+set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
+RecordAssertion $assert $GenericAssertionGuid \
+ "Ip6Config.GetData - Call GetData to get Gateway." \
+ "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
+
+GetVar R_Ip6ConfigGateway
+
+set L_Proc_Ipv6Address [GetIpv6Address {R_Ip6ConfigGateway}]
+if { [string compare $L_Proc_Ipv6Address 2002:0000:0000:0000:0000:0000:0000:5001] != 0 } {
+ puts $L_Proc_Ipv6Address
+ set assert fail
+
+ RecordAssertion $assert $Ip6ConfigSetDataFunc2AssertionGuid006 \
+ "Ip6Config.SetData - Set Gateway fail(event is signaled correctly but data is incorrect.)"
+} else {
+
+ RecordAssertion $assert $Ip6ConfigSetDataFunc2AssertionGuid006 \
+ "Ip6Config.SetData - Set Gateway success(event is signaled correctly and data is correct.)"
+}
+
+#
+# Clear the Gateway
+#
+SetVar R_Context 0
+BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context,\
+ &@R_DoneEvent, &@R_Status"
+GetAck
+set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
+RecordAssertion $assert $GenericAssertionGuid \
+ "BS.CreateEvent." \
+ "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
+
+Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
+GetAck
+set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
+RecordAssertion $assert $GenericAssertionGuid \
+ "Ip6Config.RegisterDataNotify - Register notification event for configuration." \
+ "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
+
+Ip6Config->SetData "@R_Ip6ConfigDataType,0,NULL,&@R_Status"
+GetAck
+GetVar R_Status
+if { $R_Status == $EFI_SUCCESS } {
+ set assert pass
+ RecordAssertion $assert $Ip6ConfigSetDataFunc2AssertionGuid007 \
+ "Ip6Config.SetData - Call SetData to clear Gateway." \
+ "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
+} elseif { $R_Status == $EFI_NOT_READY } {
+ set i 0
+ set L_TimeOut 30
+ while { 1 > 0 } {
+ GetVar R_Context
+ if { $R_Context == 1 } {
+ break
+ } elseif { $i == $L_TimeOut } {
+ set assert fail
+ RecordAssertion $assert $Ip6ConfigSetDataFunc2AssertionGuid007 \
+ "SetData to clear Gateway fail.(event hasn't been signaled before TIMEOUT)." \
+ "TIMEOUT value is $L_TimeOut (sec), "
+
+ SetVar R_Ip6ConfigDataType $IP6CDT(Gateway)
+ Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
+ GetAck
+ BS->CloseEvent {@R_DoneEvent,&@R_Status}
+ GetAck
+ EndScope _IP6CONFIG_SETDATA_FUNC2
+ EndLog
+ return
+ }
+ incr i
+ Stall 1
+ }
+} else {
+ set assert fail
+ RecordAssertion $assert $Ip6ConfigSetDataFunc2AssertionGuid007 \
+ "Ip6Config.SetData - Call SetData to clear Gateway." \
+ "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
+
+ SetVar R_Ip6ConfigDataType $IP6CDT(Gateway)
+ Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
+ GetAck
+ BS->CloseEvent {@R_DoneEvent,&@R_Status}
+ GetAck
+ EndScope _IP6CONFIG_SETDATA_FUNC2
+ EndLog
+ return
+}
+
+SetVar R_Ip6ConfigDataType $IP6CDT(Gateway)
+Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
+GetAck
+BS->CloseEvent {@R_DoneEvent,&@R_Status}
+GetAck
+
+Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigGateway,&@R_Status"
+GetAck
+set assert [VerifyReturnStatus R_Status $EFI_NOT_FOUND]
+RecordAssertion $assert $Ip6ConfigSetDataFunc2AssertionGuid008 \
+ "Ip6Config.GetData - Call GetData to get Gateway." \
+ "ReturnStatus - $R_Status, ExpectedStatus - $EFI_NOT_FOUND"
+
+
+#
+# Check Point : Set DnsServer with valid parameter
+#
+
+set L_DnsServerListLen 1
+EFI_IPv6_ADDRESS R_Temp_Ip6ConfigDnsServer
+EFI_IPv6_ADDRESS R_Ip6ConfigDnsServer
+set L_UnitLen [Sizeof EFI_IPv6_ADDRESS]
+set L_ListLen [expr {$L_UnitLen * $L_DnsServerListLen}]
+SetVar R_Ip6ConfigDataType $IP6CDT(DnsServer)
+SetVar R_Ip6ConfigDataSize $L_ListLen
+
+SetIpv6Address R_Temp_Ip6ConfigDnsServer "2002::5002"
+SetVar R_Ip6ConfigDnsServer @R_Temp_Ip6ConfigDnsServer
+
+SetVar R_Context 0
+BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context,\
+ &@R_DoneEvent, &@R_Status"
+GetAck
+set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
+RecordAssertion $assert $GenericAssertionGuid \
+ "BS.CreateEvent." \
+ "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
+
+Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
+GetAck
+set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
+RecordAssertion $assert $GenericAssertionGuid \
+ "Ip6Config.RegisterDataNotify - Register notification event for configuration." \
+ "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
+
+Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigDnsServer,&@R_Status"
+GetAck
+GetVar R_Status
+if { $R_Status == $EFI_SUCCESS } {
+ set assert pass
+ RecordAssertion $assert $Ip6ConfigSetDataFunc2AssertionGuid009 \
+ "Ip6Config.SetData - Call SetData to set DnsServer." \
+ "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
+} elseif { $R_Status == $EFI_NOT_READY } {
+ set i 0
+ set L_TimeOut 30
+ while { 1 > 0 } {
+ GetVar R_Context
+ if { $R_Context == 1 } {
+ break
+ } elseif { $i == $L_TimeOut } {
+ set assert fail
+ RecordAssertion $assert $Ip6ConfigSetDataFunc2AssertionGuid009 \
+ "SetData to set DnsServer fail.(event hasn't been signaled before TIMEOUT)." \
+ "TIMEOUT value is $L_TimeOut (sec), "
+
+ SetVar R_Ip6ConfigDataType $IP6CDT(DnsServer)
+ Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
+ GetAck
+ BS->CloseEvent {@R_DoneEvent,&@R_Status}
+ GetAck
+ EndScope _IP6CONFIG_SETDATA_FUNC2
+ EndLog
+ return
+ }
+ incr i
+ Stall 1
+ }
+} else {
+ set assert fail
+ RecordAssertion $assert $Ip6ConfigSetDataFunc2AssertionGuid009 \
+ "Ip6Config.SetData - Call SetData to set DnsServer." \
+ "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
+
+ SetVar R_Ip6ConfigDataType $IP6CDT(DnsServer)
+ Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
+ GetAck
+ BS->CloseEvent {@R_DoneEvent,&@R_Status}
+ GetAck
+ EndScope _IP6CONFIG_SETDATA_FUNC2
+ EndLog
+ return
+}
+
+SetVar R_Ip6ConfigDataType $IP6CDT(DnsServer)
+Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
+GetAck
+BS->CloseEvent {@R_DoneEvent,&@R_Status}
+GetAck
+
+Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigDnsServer,&@R_Status"
+GetAck
+set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
+RecordAssertion $assert $GenericAssertionGuid \
+ "Ip6Config.GetData - Call GetData to get DnsServer." \
+ "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
+
+GetVar R_Ip6ConfigDnsServer
+
+set L_Proc_Ipv6Address [GetIpv6Address {R_Ip6ConfigDnsServer}]
+if { [string compare $L_Proc_Ipv6Address 2002:0000:0000:0000:0000:0000:0000:5002] != 0 } {
+ set assert fail
+
+ RecordAssertion $assert $Ip6ConfigSetDataFunc2AssertionGuid010 \
+ "Ip6Config.SetData - Set DnsServer fail(event is signaled correctly but data is incorrect.)"
+} else {
+ RecordAssertion $assert $Ip6ConfigSetDataFunc2AssertionGuid010 \
+ "Ip6Config.SetData - Set DnsServer success(event is signaled correctly and data is correct.)"
+}
+
+#
+# Clear the DnsServer
+#
+SetVar R_Context 0
+BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context,\
+ &@R_DoneEvent, &@R_Status"
+GetAck
+set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
+RecordAssertion $assert $GenericAssertionGuid \
+ "BS.CreateEvent." \
+ "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
+
+Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
+GetAck
+set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
+RecordAssertion $assert $GenericAssertionGuid \
+ "Ip6Config.RegisterDataNotify - Register notification event for configuration." \
+ "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
+
+Ip6Config->SetData "@R_Ip6ConfigDataType,0,NULL,&@R_Status"
+GetAck
+GetVar R_Status
+if { $R_Status == $EFI_SUCCESS } {
+ set assert pass
+ RecordAssertion $assert $Ip6ConfigSetDataFunc2AssertionGuid011 \
+ "Ip6Config.SetData - Call SetData to clear DnsServer." \
+ "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
+} elseif { $R_Status == $EFI_NOT_READY } {
+ set i 0
+ set L_TimeOut 30
+ while { 1 > 0 } {
+ GetVar R_Context
+ if { $R_Context == 1 } {
+ break
+ } elseif { $i == $L_TimeOut } {
+ set assert fail
+ RecordAssertion $assert $Ip6ConfigSetDataFunc2AssertionGuid011 \
+ "SetData to clear DnsServer fail.(event hasn't been signaled before TIMEOUT)." \
+ "TIMEOUT value is $L_TimeOut (sec), "
+
+ SetVar R_Ip6ConfigDataType $IP6CDT(DnsServer)
+ Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
+ GetAck
+ BS->CloseEvent {@R_DoneEvent,&@R_Status}
+ GetAck
+ EndScope _IP6CONFIG_SETDATA_FUNC2
+ EndLog
+ return
+ }
+ incr i
+ Stall 1
+ }
+} else {
+ set assert fail
+ RecordAssertion $assert $Ip6ConfigSetDataFunc2AssertionGuid011 \
+ "Ip6Config.SetData - Call SetData to clear DnsServer." \
+ "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
+
+ SetVar R_Ip6ConfigDataType $IP6CDT(DnsServer)
+ Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
+ GetAck
+ BS->CloseEvent {@R_DoneEvent,&@R_Status}
+ GetAck
+ EndScope _IP6CONFIG_SETDATA_FUNC2
+ EndLog
+ return
+}
+
+SetVar R_Ip6ConfigDataType $IP6CDT(DnsServer)
+Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
+GetAck
+BS->CloseEvent {@R_DoneEvent,&@R_Status}
+GetAck
+
+Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigDnsServer,&@R_Status"
+GetAck
+set assert [VerifyReturnStatus R_Status $EFI_NOT_FOUND]
+RecordAssertion $assert $Ip6ConfigSetDataFunc2AssertionGuid012 \
+ "Ip6Config.GetData - Call GetData to get DnsServer." \
+ "ReturnStatus - $R_Status, ExpectedStatus - $EFI_NOT_FOUND"
+
+
+EndScope _IP6CONFIG_SETDATA_FUNC2
+
+EndLog
\ No newline at end of file
diff --git a/uefi-sct/EMS/Bin/TestCase/IP6Config/UnregisterDataNotify.Conf1.Case1.tcl b/uefi-sct/EMS/Bin/TestCase/IP6Config/UnregisterDataNotify.Conf1.Case1.tcl
index a36469f..35b36ce 100644
--- a/uefi-sct/EMS/Bin/TestCase/IP6Config/UnregisterDataNotify.Conf1.Case1.tcl
+++ b/uefi-sct/EMS/Bin/TestCase/IP6Config/UnregisterDataNotify.Conf1.Case1.tcl
@@ -1,90 +1,90 @@
-#
-# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
-# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
-#
-# This program and the accompanying materials
-# are licensed and made available under the terms and conditions of the BSD License
-# which accompanies this distribution. The full text of the license may be found at
-# http://opensource.org/licenses/bsd-license.php
-#
-# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
-# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-#
-################################################################################
-CaseLevel CONFORMANCE
-CaseAttribute AUTO
-CaseVerboseLevel DEFAULT
-set reportfile report.csv
-
-#
-# test case Name, category, description, GUID...
-#
-CaseGuid 8B7B6AA6-2DCB-434b-9533-6346ABCC686D
-CaseName UnregisterDataNotify.Conf1.Case1
-CaseCategory IP6Config
-CaseDescription {UnregisterDataNotify must not succeed when event is NULL.}
-
-################################################################################
-Include IP6Config/Include/Ip6Config.inc.tcl
-
-
-#
-# Begin log ...
-#
-BeginLog
-
-#
-# BeginScope
-#
-BeginScope _IP6CONFIG_UNREGISTERDATANOTIFY_CONF1
-
-#
-# Parameter Definition
-# R_ represents "Remote EFI Side Parameter"
-# L_ represents "Local ENTS Side Parameter"
-#
-UINTN R_Status
-UINTN R_Context
-UINTN R_DoneEvent
-UINTN R_Ip6ConfigDataSize
-UINT32 R_Ip6ConfigDataType
-EFI_IP6_CONFIG_INTERFACE_INFO R_Ip6ConfigInterfaceInfo
-EFI_IP6_CONFIG_INTERFACE_ID R_Ip6ConfigInterfaceId
-UINT32 R_Ip6ConfigPolicy
-EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS R_Ip6ConfigDadTransmits
-
-#
-# Check Point: Call Ip6Config->SetData to set manual policy
-#
-SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
-SetVar R_Ip6ConfigDataSize [Sizeof UINT32]
-SetVar R_Ip6ConfigPolicy $IP6CP(Manual)
-
-SetVar R_Context 0
-BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context,\
- &@R_DoneEvent, &@R_Status"
-GetAck
-set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
-RecordAssertion $assert $GenericAssertionGuid \
- "BS.CreateEvent." \
- "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
-
-#
-# Check Point: Call Ip6Config->UnregisterDataNotify with the event NULL
-#
-Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType, 0 ,&@R_Status"
-GetAck
-set assert [VerifyReturnStatus R_Status $EFI_INVALID_PARAMETER]
-RecordAssertion $assert $Ip6ConfigUnregisterDataNotifyConf1AssertionGuid001 \
- "Ip6Config.UnregisterDataNotify - Unregister notification event with the event NULL." \
- "ReturnStatus - $R_Status, ExpectedStatus - $EFI_INVALID_PARAMETER"
-
-#
-# Clean up
-#
-BS->CloseEvent {@R_DoneEvent,&@R_Status}
-GetAck
-
-EndScope _IP6CONFIG_UNREGISTERDATANOTIFY_CONF1
-
+#
+# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
+# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
+#
+# This program and the accompanying materials
+# are licensed and made available under the terms and conditions of the BSD License
+# which accompanies this distribution. The full text of the license may be found at
+# http://opensource.org/licenses/bsd-license.php
+#
+# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+#
+################################################################################
+CaseLevel CONFORMANCE
+CaseAttribute AUTO
+CaseVerboseLevel DEFAULT
+set reportfile report.csv
+
+#
+# test case Name, category, description, GUID...
+#
+CaseGuid 8B7B6AA6-2DCB-434b-9533-6346ABCC686D
+CaseName UnregisterDataNotify.Conf1.Case1
+CaseCategory IP6Config
+CaseDescription {UnregisterDataNotify must not succeed when event is NULL.}
+
+################################################################################
+Include IP6Config/Include/Ip6Config.inc.tcl
+
+
+#
+# Begin log ...
+#
+BeginLog
+
+#
+# BeginScope
+#
+BeginScope _IP6CONFIG_UNREGISTERDATANOTIFY_CONF1
+
+#
+# Parameter Definition
+# R_ represents "Remote EFI Side Parameter"
+# L_ represents "Local ENTS Side Parameter"
+#
+UINTN R_Status
+UINTN R_Context
+UINTN R_DoneEvent
+UINTN R_Ip6ConfigDataSize
+UINT32 R_Ip6ConfigDataType
+EFI_IP6_CONFIG_INTERFACE_INFO R_Ip6ConfigInterfaceInfo
+EFI_IP6_CONFIG_INTERFACE_ID R_Ip6ConfigInterfaceId
+UINT32 R_Ip6ConfigPolicy
+EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS R_Ip6ConfigDadTransmits
+
+#
+# Check Point: Call Ip6Config->SetData to set manual policy
+#
+SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
+SetVar R_Ip6ConfigDataSize [Sizeof UINT32]
+SetVar R_Ip6ConfigPolicy $IP6CP(Manual)
+
+SetVar R_Context 0
+BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context,\
+ &@R_DoneEvent, &@R_Status"
+GetAck
+set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
+RecordAssertion $assert $GenericAssertionGuid \
+ "BS.CreateEvent." \
+ "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
+
+#
+# Check Point: Call Ip6Config->UnregisterDataNotify with the event NULL
+#
+Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType, 0 ,&@R_Status"
+GetAck
+set assert [VerifyReturnStatus R_Status $EFI_INVALID_PARAMETER]
+RecordAssertion $assert $Ip6ConfigUnregisterDataNotifyConf1AssertionGuid001 \
+ "Ip6Config.UnregisterDataNotify - Unregister notification event with the event NULL." \
+ "ReturnStatus - $R_Status, ExpectedStatus - $EFI_INVALID_PARAMETER"
+
+#
+# Clean up
+#
+BS->CloseEvent {@R_DoneEvent,&@R_Status}
+GetAck
+
+EndScope _IP6CONFIG_UNREGISTERDATANOTIFY_CONF1
+
EndLog
\ No newline at end of file
diff --git a/uefi-sct/EMS/Bin/TestCase/IP6Config/UnregisterDataNotify.Conf2.Case1.tcl b/uefi-sct/EMS/Bin/TestCase/IP6Config/UnregisterDataNotify.Conf2.Case1.tcl
index d41f141..7eb5808 100644
--- a/uefi-sct/EMS/Bin/TestCase/IP6Config/UnregisterDataNotify.Conf2.Case1.tcl
+++ b/uefi-sct/EMS/Bin/TestCase/IP6Config/UnregisterDataNotify.Conf2.Case1.tcl
@@ -1,83 +1,83 @@
-#
-# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
-# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
-#
-# This program and the accompanying materials
-# are licensed and made available under the terms and conditions of the BSD License
-# which accompanies this distribution. The full text of the license may be found at
-# http://opensource.org/licenses/bsd-license.php
-#
-# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
-# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-#
-################################################################################
-CaseLevel CONFORMANCE
-CaseAttribute AUTO
-CaseVerboseLevel DEFAULT
-set reportfile report.csv
-
-#
-# test case Name, category, description, GUID...
-#
-CaseGuid 9CE66A42-FADC-4d44-B577-B58CED8E984B
-CaseName UnregisterDataNotify.Conf2.Case1
-CaseCategory IP6Config
-CaseDescription {UnregisterDataNotify must not succeed when then event has not been registered for the data type ever.}
-
-################################################################################
-Include IP6Config/Include/Ip6Config.inc.tcl
-
-
-#
-# Begin log ...
-#
-BeginLog
-
-#
-# BeginScope
-#
-BeginScope _IP6CONFIG_UNREGISTERDATANOTIFY_CONF2_CASE1
-
-#
-# Parameter Definition
-# R_ represents "Remote EFI Side Parameter"
-# L_ represents "Local ENTS Side Parameter"
-#
-UINTN R_Status
-UINTN R_Context
-UINTN R_DoneEvent
-UINTN R_Ip6ConfigDataSize
-UINT32 R_Ip6ConfigDataType
-
-#
-# Check Point: Call Ip6Config->UnregisterDataNotify with the event not registered
-#
-
-SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
-SetVar R_Ip6ConfigDataSize [Sizeof EFI_IP6_CONFIG_MANUAL_ADDRESS]
-
-SetVar R_Context 0
-BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context,\
- &@R_DoneEvent, &@R_Status"
-GetAck
-set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
-RecordAssertion $assert $GenericAssertionGuid \
- "BS.CreateEvent." \
- "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
-
-Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType, @R_DoneEvent ,&@R_Status"
-GetAck
-set assert [VerifyReturnStatus R_Status $EFI_NOT_FOUND]
-RecordAssertion $assert $Ip6ConfigUnregisterDataNotifyConf2AssertionGuid001 \
- "Ip6Config.UnregisterDataNotify - Unregister notification event with the event not registered." \
- "ReturnStatus - $R_Status, ExpectedStatus - $EFI_NOT_FOUND"
-
-#
-# Clean up
-#
-BS->CloseEvent {@R_DoneEvent,&@R_Status}
-GetAck
-
-EndScope _IP6CONFIG_UNREGISTERDATANOTIFY_CONF2_CASE1
-
+#
+# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
+# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
+#
+# This program and the accompanying materials
+# are licensed and made available under the terms and conditions of the BSD License
+# which accompanies this distribution. The full text of the license may be found at
+# http://opensource.org/licenses/bsd-license.php
+#
+# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+#
+################################################################################
+CaseLevel CONFORMANCE
+CaseAttribute AUTO
+CaseVerboseLevel DEFAULT
+set reportfile report.csv
+
+#
+# test case Name, category, description, GUID...
+#
+CaseGuid 9CE66A42-FADC-4d44-B577-B58CED8E984B
+CaseName UnregisterDataNotify.Conf2.Case1
+CaseCategory IP6Config
+CaseDescription {UnregisterDataNotify must not succeed when then event has not been registered for the data type ever.}
+
+################################################################################
+Include IP6Config/Include/Ip6Config.inc.tcl
+
+
+#
+# Begin log ...
+#
+BeginLog
+
+#
+# BeginScope
+#
+BeginScope _IP6CONFIG_UNREGISTERDATANOTIFY_CONF2_CASE1
+
+#
+# Parameter Definition
+# R_ represents "Remote EFI Side Parameter"
+# L_ represents "Local ENTS Side Parameter"
+#
+UINTN R_Status
+UINTN R_Context
+UINTN R_DoneEvent
+UINTN R_Ip6ConfigDataSize
+UINT32 R_Ip6ConfigDataType
+
+#
+# Check Point: Call Ip6Config->UnregisterDataNotify with the event not registered
+#
+
+SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
+SetVar R_Ip6ConfigDataSize [Sizeof EFI_IP6_CONFIG_MANUAL_ADDRESS]
+
+SetVar R_Context 0
+BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context,\
+ &@R_DoneEvent, &@R_Status"
+GetAck
+set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
+RecordAssertion $assert $GenericAssertionGuid \
+ "BS.CreateEvent." \
+ "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
+
+Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType, @R_DoneEvent ,&@R_Status"
+GetAck
+set assert [VerifyReturnStatus R_Status $EFI_NOT_FOUND]
+RecordAssertion $assert $Ip6ConfigUnregisterDataNotifyConf2AssertionGuid001 \
+ "Ip6Config.UnregisterDataNotify - Unregister notification event with the event not registered." \
+ "ReturnStatus - $R_Status, ExpectedStatus - $EFI_NOT_FOUND"
+
+#
+# Clean up
+#
+BS->CloseEvent {@R_DoneEvent,&@R_Status}
+GetAck
+
+EndScope _IP6CONFIG_UNREGISTERDATANOTIFY_CONF2_CASE1
+
EndLog
\ No newline at end of file
diff --git a/uefi-sct/EMS/Bin/TestCase/IP6Config/UnregisterDataNotify.Conf2.Case2.tcl b/uefi-sct/EMS/Bin/TestCase/IP6Config/UnregisterDataNotify.Conf2.Case2.tcl
index 5608dbe..e56d26a 100644
--- a/uefi-sct/EMS/Bin/TestCase/IP6Config/UnregisterDataNotify.Conf2.Case2.tcl
+++ b/uefi-sct/EMS/Bin/TestCase/IP6Config/UnregisterDataNotify.Conf2.Case2.tcl
@@ -1,99 +1,99 @@
-#
-# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
-# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
-#
-# This program and the accompanying materials
-# are licensed and made available under the terms and conditions of the BSD License
-# which accompanies this distribution. The full text of the license may be found at
-# http://opensource.org/licenses/bsd-license.php
-#
-# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
-# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-#
-################################################################################
-CaseLevel CONFORMANCE
-CaseAttribute AUTO
-CaseVerboseLevel DEFAULT
-set reportfile report.csv
-
-#
-# test case Name, category, description, GUID...
-#
-CaseGuid EB679CF9-9A56-4a9f-B5CF-2D845B044560
-CaseName UnregisterDataNotify.Conf2.Case2
-CaseCategory IP6Config
-CaseDescription {UnregisterDataNotify must not succeed when the event was registered and then unregistered for the data type.}
-
-################################################################################
-Include IP6Config/Include/Ip6Config.inc.tcl
-
-
-#
-# Begin log ...
-#
-BeginLog
-
-#
-# BeginScope
-#
-BeginScope _IP6CONFIG_UNREGISTERDATANOTIFY_CONF2_CASE2
-
-#
-# Parameter Definition
-# R_ represents "Remote EFI Side Parameter"
-# L_ represents "Local ENTS Side Parameter"
-#
-UINTN R_Status
-UINTN R_Context
-UINTN R_DoneEvent
-UINTN R_Ip6ConfigDataSize
-UINT32 R_Ip6ConfigDataType
-
-#
-# Check Point: Register event for Datatype - ManualAddress and then unregister it
-#
-SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
-SetVar R_Ip6ConfigDataSize [Sizeof EFI_IP6_CONFIG_MANUAL_ADDRESS]
-
-SetVar R_Context 0
-BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context,\
- &@R_DoneEvent, &@R_Status"
-GetAck
-set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
-RecordAssertion $assert $GenericAssertionGuid \
- "BS.CreateEvent." \
- "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
-
-Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
-GetAck
-set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
-RecordAssertion $assert $GenericAssertionGuid \
- "Ip6Config.RegisterDataNotify - Register notification event for configuration." \
- "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
-
-Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType, @R_DoneEvent ,&@R_Status"
-GetAck
-set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
-RecordAssertion $assert $GenericAssertionGuid \
- "Ip6Config.UnregisterDataNotify - Unregister notification event with correct parameters." \
- "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
-
-#
-# Check Point: Unregister the event again
-#
-Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType, @R_DoneEvent ,&@R_Status"
-GetAck
-set assert [VerifyReturnStatus R_Status $EFI_NOT_FOUND]
-RecordAssertion $assert $Ip6ConfigUnregisterDataNotifyConf2AssertionGuid002 \
- "Ip6Config.UnregisterDataNotify - Unregister notification event with the event has been unregistered." \
- "ReturnStatus - $R_Status, ExpectedStatus - $EFI_NOT_FOUND"
-
-#
-# Clean up
-#
-BS->CloseEvent {@R_DoneEvent,&@R_Status}
-GetAck
-
-EndScope _IP6CONFIG_UNREGISTERDATANOTIFY_CONF2_CASE2
-
+#
+# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
+# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
+#
+# This program and the accompanying materials
+# are licensed and made available under the terms and conditions of the BSD License
+# which accompanies this distribution. The full text of the license may be found at
+# http://opensource.org/licenses/bsd-license.php
+#
+# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+#
+################################################################################
+CaseLevel CONFORMANCE
+CaseAttribute AUTO
+CaseVerboseLevel DEFAULT
+set reportfile report.csv
+
+#
+# test case Name, category, description, GUID...
+#
+CaseGuid EB679CF9-9A56-4a9f-B5CF-2D845B044560
+CaseName UnregisterDataNotify.Conf2.Case2
+CaseCategory IP6Config
+CaseDescription {UnregisterDataNotify must not succeed when the event was registered and then unregistered for the data type.}
+
+################################################################################
+Include IP6Config/Include/Ip6Config.inc.tcl
+
+
+#
+# Begin log ...
+#
+BeginLog
+
+#
+# BeginScope
+#
+BeginScope _IP6CONFIG_UNREGISTERDATANOTIFY_CONF2_CASE2
+
+#
+# Parameter Definition
+# R_ represents "Remote EFI Side Parameter"
+# L_ represents "Local ENTS Side Parameter"
+#
+UINTN R_Status
+UINTN R_Context
+UINTN R_DoneEvent
+UINTN R_Ip6ConfigDataSize
+UINT32 R_Ip6ConfigDataType
+
+#
+# Check Point: Register event for Datatype - ManualAddress and then unregister it
+#
+SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
+SetVar R_Ip6ConfigDataSize [Sizeof EFI_IP6_CONFIG_MANUAL_ADDRESS]
+
+SetVar R_Context 0
+BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context,\
+ &@R_DoneEvent, &@R_Status"
+GetAck
+set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
+RecordAssertion $assert $GenericAssertionGuid \
+ "BS.CreateEvent." \
+ "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
+
+Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
+GetAck
+set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
+RecordAssertion $assert $GenericAssertionGuid \
+ "Ip6Config.RegisterDataNotify - Register notification event for configuration." \
+ "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
+
+Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType, @R_DoneEvent ,&@R_Status"
+GetAck
+set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
+RecordAssertion $assert $GenericAssertionGuid \
+ "Ip6Config.UnregisterDataNotify - Unregister notification event with correct parameters." \
+ "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
+
+#
+# Check Point: Unregister the event again
+#
+Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType, @R_DoneEvent ,&@R_Status"
+GetAck
+set assert [VerifyReturnStatus R_Status $EFI_NOT_FOUND]
+RecordAssertion $assert $Ip6ConfigUnregisterDataNotifyConf2AssertionGuid002 \
+ "Ip6Config.UnregisterDataNotify - Unregister notification event with the event has been unregistered." \
+ "ReturnStatus - $R_Status, ExpectedStatus - $EFI_NOT_FOUND"
+
+#
+# Clean up
+#
+BS->CloseEvent {@R_DoneEvent,&@R_Status}
+GetAck
+
+EndScope _IP6CONFIG_UNREGISTERDATANOTIFY_CONF2_CASE2
+
EndLog
\ No newline at end of file
diff --git a/uefi-sct/EMS/Bin/TestCase/IP6Config/UnregisterDataNotify.Func1.Case1.tcl b/uefi-sct/EMS/Bin/TestCase/IP6Config/UnregisterDataNotify.Func1.Case1.tcl
index 5b88510..6315fa7 100644
--- a/uefi-sct/EMS/Bin/TestCase/IP6Config/UnregisterDataNotify.Func1.Case1.tcl
+++ b/uefi-sct/EMS/Bin/TestCase/IP6Config/UnregisterDataNotify.Func1.Case1.tcl
@@ -1,98 +1,98 @@
-#
-# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
-# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
-#
-# This program and the accompanying materials
-# are licensed and made available under the terms and conditions of the BSD License
-# which accompanies this distribution. The full text of the license may be found at
-# http://opensource.org/licenses/bsd-license.php
-#
-# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
-# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-#
-################################################################################
-CaseLevel FUNCTION
-CaseAttribute AUTO
-CaseVerboseLevel DEFAULT
-set reportfile report.csv
-
-#
-# test case Name, category, description, GUID...
-#
-CaseGuid 769658B4-3397-4367-8E10-C4513407FFB8
-CaseName UnregisterDataNotify.Func1.Case1
-CaseCategory IP6Config
-CaseDescription {UnregisterDataNotify must succeed with valid parameters when handling signal datatype.}
-
-################################################################################
-Include IP6Config/Include/Ip6Config.inc.tcl
-
-
-#
-# Begin log ...
-#
-BeginLog
-
-#
-# BeginScope
-#
-BeginScope _IP6CONFIG_UNREGISTERDATANOTIFY_FUNC1_CASE1
-
-#
-# Parameter Definition
-# R_ represents "Remote EFI Side Parameter"
-# L_ represents "Local ENTS Side Parameter"
-#
-UINTN R_Status
-UINTN R_Context
-UINTN R_DoneEvent
-UINTN R_Ip6ConfigDataSize
-UINT32 R_Ip6ConfigDataType
-EFI_IP6_CONFIG_INTERFACE_INFO R_Ip6ConfigInterfaceInfo
-EFI_IP6_CONFIG_INTERFACE_ID R_Ip6ConfigInterfaceId
-UINT32 R_Ip6ConfigPolicy
-EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS R_Ip6ConfigDadTransmits
-
-#
-# Create Event and RegisterDataNotify
-#
-SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
-SetVar R_Ip6ConfigDataSize [Sizeof UINT32]
-SetVar R_Ip6ConfigPolicy $IP6CP(Manual)
-
-SetVar R_Context 0
-BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context,\
- &@R_DoneEvent, &@R_Status"
-GetAck
-set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
-RecordAssertion $assert $GenericAssertionGuid \
- "BS.CreateEvent." \
- "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
-
-Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType, @R_DoneEvent ,&@R_Status"
-GetAck
-set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
-RecordAssertion $assert $GenericAssertionGuid \
- "IfConfig6.RegisterDataNotify() with valid parameter." \
- "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
-
-#
-# Check Point : Call Ip6Config->UnregisterDataNotify with valid parameter
-#
-SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
-Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
-GetAck
-set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
-RecordAssertion $assert $Ip6ConfigUnregisterDataNotifyFunc1AssertionGuid001 \
- "Ip6Config.UnregisterDataNotify - Unregister notification event for configuration." \
- "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
-
-#
-# Close event
-#
-BS->CloseEvent {@R_DoneEvent,&@R_Status}
-GetAck
-
-EndScope _IP6CONFIG_UNREGISTERDATANOTIFY_FUNC1_CASE1
-
+#
+# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
+# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
+#
+# This program and the accompanying materials
+# are licensed and made available under the terms and conditions of the BSD License
+# which accompanies this distribution. The full text of the license may be found at
+# http://opensource.org/licenses/bsd-license.php
+#
+# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+#
+################################################################################
+CaseLevel FUNCTION
+CaseAttribute AUTO
+CaseVerboseLevel DEFAULT
+set reportfile report.csv
+
+#
+# test case Name, category, description, GUID...
+#
+CaseGuid 769658B4-3397-4367-8E10-C4513407FFB8
+CaseName UnregisterDataNotify.Func1.Case1
+CaseCategory IP6Config
+CaseDescription {UnregisterDataNotify must succeed with valid parameters when handling signal datatype.}
+
+################################################################################
+Include IP6Config/Include/Ip6Config.inc.tcl
+
+
+#
+# Begin log ...
+#
+BeginLog
+
+#
+# BeginScope
+#
+BeginScope _IP6CONFIG_UNREGISTERDATANOTIFY_FUNC1_CASE1
+
+#
+# Parameter Definition
+# R_ represents "Remote EFI Side Parameter"
+# L_ represents "Local ENTS Side Parameter"
+#
+UINTN R_Status
+UINTN R_Context
+UINTN R_DoneEvent
+UINTN R_Ip6ConfigDataSize
+UINT32 R_Ip6ConfigDataType
+EFI_IP6_CONFIG_INTERFACE_INFO R_Ip6ConfigInterfaceInfo
+EFI_IP6_CONFIG_INTERFACE_ID R_Ip6ConfigInterfaceId
+UINT32 R_Ip6ConfigPolicy
+EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS R_Ip6ConfigDadTransmits
+
+#
+# Create Event and RegisterDataNotify
+#
+SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
+SetVar R_Ip6ConfigDataSize [Sizeof UINT32]
+SetVar R_Ip6ConfigPolicy $IP6CP(Manual)
+
+SetVar R_Context 0
+BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context,\
+ &@R_DoneEvent, &@R_Status"
+GetAck
+set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
+RecordAssertion $assert $GenericAssertionGuid \
+ "BS.CreateEvent." \
+ "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
+
+Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType, @R_DoneEvent ,&@R_Status"
+GetAck
+set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
+RecordAssertion $assert $GenericAssertionGuid \
+ "IfConfig6.RegisterDataNotify() with valid parameter." \
+ "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
+
+#
+# Check Point : Call Ip6Config->UnregisterDataNotify with valid parameter
+#
+SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
+Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
+GetAck
+set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
+RecordAssertion $assert $Ip6ConfigUnregisterDataNotifyFunc1AssertionGuid001 \
+ "Ip6Config.UnregisterDataNotify - Unregister notification event for configuration." \
+ "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
+
+#
+# Close event
+#
+BS->CloseEvent {@R_DoneEvent,&@R_Status}
+GetAck
+
+EndScope _IP6CONFIG_UNREGISTERDATANOTIFY_FUNC1_CASE1
+
EndLog
\ No newline at end of file
diff --git a/uefi-sct/EMS/Bin/TestCase/IP6Config/UnregisterDataNotify.Func1.Case2.tcl b/uefi-sct/EMS/Bin/TestCase/IP6Config/UnregisterDataNotify.Func1.Case2.tcl
index 9f30136..cf1a374 100644
--- a/uefi-sct/EMS/Bin/TestCase/IP6Config/UnregisterDataNotify.Func1.Case2.tcl
+++ b/uefi-sct/EMS/Bin/TestCase/IP6Config/UnregisterDataNotify.Func1.Case2.tcl
@@ -1,237 +1,237 @@
-#
-# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
-# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
-#
-# This program and the accompanying materials
-# are licensed and made available under the terms and conditions of the BSD License
-# which accompanies this distribution. The full text of the license may be found at
-# http://opensource.org/licenses/bsd-license.php
-#
-# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
-# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-#
-################################################################################
-CaseLevel FUNCTION
-CaseAttribute AUTO
-CaseVerboseLevel DEFAULT
-set reportfile report.csv
-
-#
-# test case Name, category, description, GUID...
-#
-CaseGuid C206AA15-2F53-4860-BD78-453C4EA463B6
-CaseName UnregisterDataNotify.Func1.Case2
-CaseCategory IP6Config
-CaseDescription {UnregisterDataNotify must succeed with valid parameters when handling multiple datatype.}
-
-################################################################################
-Include IP6Config/Include/Ip6Config.inc.tcl
-
-
-#
-# Begin log ...
-#
-BeginLog
-
-#
-# BeginScope
-#
-BeginScope _IP6CONFIG_UNREGISTERDATANOTIFY_FUNC1_CASE2
-
-#
-# Parameter Definition
-# R_ represents "Remote EFI Side Parameter"
-# L_ represents "Local ENTS Side Parameter"
-#
-UINTN R_Status
-UINTN R_Context
-UINTN R_DoneEvent
-UINTN R_Ip6ConfigDataSize
-UINT32 R_Ip6ConfigDataType
-EFI_IP6_CONFIG_INTERFACE_INFO R_Ip6ConfigInterfaceInfo
-EFI_IP6_CONFIG_INTERFACE_ID R_Ip6ConfigInterfaceId
-UINT32 R_Ip6ConfigPolicy
-EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS R_Ip6ConfigDadTransmits
-
-#
-# Check Point: Create Event and register it with data type [Policy] and [DadXmits]
-#
-SetVar R_Context 0
-BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context,\
- &@R_DoneEvent, &@R_Status"
-GetAck
-set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
-RecordAssertion $assert $GenericAssertionGuid \
- "BS.CreateEvent." \
- "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
-
-SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
-SetVar R_Ip6ConfigDataSize [Sizeof UINT32]
-SetVar R_Ip6ConfigPolicy $IP6CP(Manual)
-
-Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
-GetAck
-set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
-RecordAssertion $assert $GenericAssertionGuid \
- "Ip6Config.RegisterDataNotify - Register notification event for configuration." \
- "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
-
-SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
-SetVar R_Ip6ConfigDataSize [Sizeof EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS]
-SetVar R_Ip6ConfigDadTransmits.DupAddrDetectTransmits 3
-
-Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
-GetAck
-set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
-RecordAssertion $assert $GenericAssertionGuid \
- "Ip6Config.RegisterDataNotify - Register notification event for configuration." \
- "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
-
-#
-# Check Point: Unregister the event on Datatype [Policy]
-#
-SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
-SetVar R_Ip6ConfigDataSize [Sizeof UINT32]
-SetVar R_Ip6ConfigPolicy $IP6CP(Manual)
-
-Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
-GetAck
-set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
-RecordAssertion $assert $Ip6ConfigUnregisterDataNotifyFunc1AssertionGuid002 \
- "Ip6Config.UnregisterDataNotify - Unregister notification event for Datatype - Policy." \
- "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
-
-#
-# Check Point: Call Ip6Cofnig->SetData to set [Policy] and check whether the event is signaled.
-#
-SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
-SetVar R_Ip6ConfigDataSize [Sizeof UINT32]
-SetVar R_Ip6ConfigPolicy $IP6CP(Manual)
-
-GetVar R_Context
-set L_Context1 $R_Context
-set L_Context2 $L_Context1
-
-Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_Status"
-GetAck
-GetVar R_Status
-if { $R_Status == $EFI_SUCCESS } {
- Stall 5
- GetVar R_Context
- if { $R_Context == $L_Context2 } {
- set assert pass
- } else {
- set assert fail
- }
- RecordAssertion $assert $Ip6ConfigRegisterDataNotifyFunc1AssertionGuid003 \
- "Ip6Config.UnregisterDataNotify - Event should not be signaled for DataType - Policy."
-} else {
- set assert fail
-
- RecordAssertion $assert $GenericAssertionGuid \
- "Ip6Config.SetData - Call SetData to set manual policy." \
- "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
-
- SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
- Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
- GetAck
- BS->CloseEvent {@R_DoneEvent,&@R_Status}
- GetAck
- EndScope _IP6CONFIG_UNREGISTERDATANOTIFY_FUNC1_CASE2
- EndLog
- return
-}
-
-#
-# Check Point: Call Ip6Config->SetData to set [DadXmits] and check whether the event is signaled.
-#
-SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
-SetVar R_Ip6ConfigDataSize [Sizeof EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS]
-SetVar R_Ip6ConfigDadTransmits.DupAddrDetectTransmits 3
-
-GetVar R_Context
-set L_Context1 $R_Context
-set L_Context2 [expr { $L_Context1 + 1 }]
-
-Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigDadTransmits,&@R_Status"
-GetAck
-GetVar R_Status
-
-if { $R_Status == $EFI_SUCCESS } {
- set assert pass
- RecordAssertion $assert $GenericAssertionGuid \
- "Ip6Config.SetData - Call SetData to set DadXmits." \
- "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
-} elseif { $R_Status == $EFI_NOT_READY } {
- set i 0
- set L_TimeOut 30
- while { 1 > 0 } {
- GetVar R_Context
- if { $R_Context == $L_Context2 } {
- break
- } elseif { $i == $L_TimeOut } {
- set assert fail
- RecordAssertion $assert $GenericAssertionGuid \
- "SetData failed.(event hasn't been signaled before TIMEOUT)." \
- "TIMEOUT value is $L_TimeOut (sec), "
-
- SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
- Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
- GetAck
- SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
- Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
- GetAck
- BS->CloseEvent {@R_DoneEvent,&@R_Status}
- GetAck
- EndScope _IP6CONFIG_UNREGISTERDATANOTIFY_FUNC1_CASE2
- EndLog
- return
- }
- incr i
- Stall 1
- }
-} else {
- set assert fail
- RecordAssertion $assert $GenericAssertionGuid \
- "Ip6Config.SetData - Call SetData to set DadXmits." \
- "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
-
- SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
- Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
- GetAck
- SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
- Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
- GetAck
- BS->CloseEvent {@R_DoneEvent,&@R_Status}
- GetAck
- EndScope _IP6CONFIG_UNREGISTERDATANOTIFY_FUNC1_CASE2
- EndLog
- return
-}
-
-GetVar R_Context
-if { $R_Context == $L_Context2 } {
- set assert pass
-} else {
- set assert fail
-}
-RecordAssertion $assert $Ip6ConfigRegisterDataNotifyFunc1AssertionGuid004 \
- "Ip6Config.RegisterDataNotify - Event should be signaled for DataType - DadXmits."
-
-#
-# Clean up
-#
-SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
-Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
-GetAck
-set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
-RecordAssertion $assert $GenericAssertionGuid \
- "Ip6Config.UnregisterDataNotify - Unregister notification event for configuration." \
- "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
-
-BS->CloseEvent {@R_DoneEvent,&@R_Status}
-GetAck
-
-EndScope _IP6CONFIG_UNREGISTERDATANOTIFY_FUNC1_CASE2
-
+#
+# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
+# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
+#
+# This program and the accompanying materials
+# are licensed and made available under the terms and conditions of the BSD License
+# which accompanies this distribution. The full text of the license may be found at
+# http://opensource.org/licenses/bsd-license.php
+#
+# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+#
+################################################################################
+CaseLevel FUNCTION
+CaseAttribute AUTO
+CaseVerboseLevel DEFAULT
+set reportfile report.csv
+
+#
+# test case Name, category, description, GUID...
+#
+CaseGuid C206AA15-2F53-4860-BD78-453C4EA463B6
+CaseName UnregisterDataNotify.Func1.Case2
+CaseCategory IP6Config
+CaseDescription {UnregisterDataNotify must succeed with valid parameters when handling multiple datatype.}
+
+################################################################################
+Include IP6Config/Include/Ip6Config.inc.tcl
+
+
+#
+# Begin log ...
+#
+BeginLog
+
+#
+# BeginScope
+#
+BeginScope _IP6CONFIG_UNREGISTERDATANOTIFY_FUNC1_CASE2
+
+#
+# Parameter Definition
+# R_ represents "Remote EFI Side Parameter"
+# L_ represents "Local ENTS Side Parameter"
+#
+UINTN R_Status
+UINTN R_Context
+UINTN R_DoneEvent
+UINTN R_Ip6ConfigDataSize
+UINT32 R_Ip6ConfigDataType
+EFI_IP6_CONFIG_INTERFACE_INFO R_Ip6ConfigInterfaceInfo
+EFI_IP6_CONFIG_INTERFACE_ID R_Ip6ConfigInterfaceId
+UINT32 R_Ip6ConfigPolicy
+EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS R_Ip6ConfigDadTransmits
+
+#
+# Check Point: Create Event and register it with data type [Policy] and [DadXmits]
+#
+SetVar R_Context 0
+BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context,\
+ &@R_DoneEvent, &@R_Status"
+GetAck
+set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
+RecordAssertion $assert $GenericAssertionGuid \
+ "BS.CreateEvent." \
+ "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
+
+SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
+SetVar R_Ip6ConfigDataSize [Sizeof UINT32]
+SetVar R_Ip6ConfigPolicy $IP6CP(Manual)
+
+Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
+GetAck
+set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
+RecordAssertion $assert $GenericAssertionGuid \
+ "Ip6Config.RegisterDataNotify - Register notification event for configuration." \
+ "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
+
+SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
+SetVar R_Ip6ConfigDataSize [Sizeof EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS]
+SetVar R_Ip6ConfigDadTransmits.DupAddrDetectTransmits 3
+
+Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
+GetAck
+set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
+RecordAssertion $assert $GenericAssertionGuid \
+ "Ip6Config.RegisterDataNotify - Register notification event for configuration." \
+ "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
+
+#
+# Check Point: Unregister the event on Datatype [Policy]
+#
+SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
+SetVar R_Ip6ConfigDataSize [Sizeof UINT32]
+SetVar R_Ip6ConfigPolicy $IP6CP(Manual)
+
+Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
+GetAck
+set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
+RecordAssertion $assert $Ip6ConfigUnregisterDataNotifyFunc1AssertionGuid002 \
+ "Ip6Config.UnregisterDataNotify - Unregister notification event for Datatype - Policy." \
+ "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
+
+#
+# Check Point: Call Ip6Cofnig->SetData to set [Policy] and check whether the event is signaled.
+#
+SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
+SetVar R_Ip6ConfigDataSize [Sizeof UINT32]
+SetVar R_Ip6ConfigPolicy $IP6CP(Manual)
+
+GetVar R_Context
+set L_Context1 $R_Context
+set L_Context2 $L_Context1
+
+Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_Status"
+GetAck
+GetVar R_Status
+if { $R_Status == $EFI_SUCCESS } {
+ Stall 5
+ GetVar R_Context
+ if { $R_Context == $L_Context2 } {
+ set assert pass
+ } else {
+ set assert fail
+ }
+ RecordAssertion $assert $Ip6ConfigRegisterDataNotifyFunc1AssertionGuid003 \
+ "Ip6Config.UnregisterDataNotify - Event should not be signaled for DataType - Policy."
+} else {
+ set assert fail
+
+ RecordAssertion $assert $GenericAssertionGuid \
+ "Ip6Config.SetData - Call SetData to set manual policy." \
+ "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
+
+ SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
+ Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
+ GetAck
+ BS->CloseEvent {@R_DoneEvent,&@R_Status}
+ GetAck
+ EndScope _IP6CONFIG_UNREGISTERDATANOTIFY_FUNC1_CASE2
+ EndLog
+ return
+}
+
+#
+# Check Point: Call Ip6Config->SetData to set [DadXmits] and check whether the event is signaled.
+#
+SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
+SetVar R_Ip6ConfigDataSize [Sizeof EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS]
+SetVar R_Ip6ConfigDadTransmits.DupAddrDetectTransmits 3
+
+GetVar R_Context
+set L_Context1 $R_Context
+set L_Context2 [expr { $L_Context1 + 1 }]
+
+Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigDadTransmits,&@R_Status"
+GetAck
+GetVar R_Status
+
+if { $R_Status == $EFI_SUCCESS } {
+ set assert pass
+ RecordAssertion $assert $GenericAssertionGuid \
+ "Ip6Config.SetData - Call SetData to set DadXmits." \
+ "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
+} elseif { $R_Status == $EFI_NOT_READY } {
+ set i 0
+ set L_TimeOut 30
+ while { 1 > 0 } {
+ GetVar R_Context
+ if { $R_Context == $L_Context2 } {
+ break
+ } elseif { $i == $L_TimeOut } {
+ set assert fail
+ RecordAssertion $assert $GenericAssertionGuid \
+ "SetData failed.(event hasn't been signaled before TIMEOUT)." \
+ "TIMEOUT value is $L_TimeOut (sec), "
+
+ SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
+ Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
+ GetAck
+ SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
+ Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
+ GetAck
+ BS->CloseEvent {@R_DoneEvent,&@R_Status}
+ GetAck
+ EndScope _IP6CONFIG_UNREGISTERDATANOTIFY_FUNC1_CASE2
+ EndLog
+ return
+ }
+ incr i
+ Stall 1
+ }
+} else {
+ set assert fail
+ RecordAssertion $assert $GenericAssertionGuid \
+ "Ip6Config.SetData - Call SetData to set DadXmits." \
+ "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
+
+ SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
+ Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
+ GetAck
+ SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
+ Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
+ GetAck
+ BS->CloseEvent {@R_DoneEvent,&@R_Status}
+ GetAck
+ EndScope _IP6CONFIG_UNREGISTERDATANOTIFY_FUNC1_CASE2
+ EndLog
+ return
+}
+
+GetVar R_Context
+if { $R_Context == $L_Context2 } {
+ set assert pass
+} else {
+ set assert fail
+}
+RecordAssertion $assert $Ip6ConfigRegisterDataNotifyFunc1AssertionGuid004 \
+ "Ip6Config.RegisterDataNotify - Event should be signaled for DataType - DadXmits."
+
+#
+# Clean up
+#
+SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
+Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
+GetAck
+set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
+RecordAssertion $assert $GenericAssertionGuid \
+ "Ip6Config.UnregisterDataNotify - Unregister notification event for configuration." \
+ "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
+
+BS->CloseEvent {@R_DoneEvent,&@R_Status}
+GetAck
+
+EndScope _IP6CONFIG_UNREGISTERDATANOTIFY_FUNC1_CASE2
+
EndLog
\ No newline at end of file
--
2.9.0.windows.1
^ permalink raw reply related [flat|nested] 4+ messages in thread
* Re: [edk2-test][Patch] uefi-sct/EMS:Add the checkpoint for SetData
2018-10-12 8:20 [edk2-test][Patch] uefi-sct/EMS:Add the checkpoint for SetData Eric Jin
@ 2018-10-12 8:57 ` Supreeth Venkatesh
2018-10-12 17:01 ` Jin, Eric
2018-10-13 1:55 ` Wu, Jiaxin
1 sibling, 1 reply; 4+ messages in thread
From: Supreeth Venkatesh @ 2018-10-12 8:57 UTC (permalink / raw)
To: Eric Jin, edk2-devel
Eric,
We don't have EMS support in AARCH64, Can someone from Intel review this?
Thanks,
Supreeth
On 10/12/2018 09:20 AM, Eric Jin wrote:
> Spec clarifies the configuration clearance behavior
> Correct the end line
>
> Contributed-under: TianoCore Contribution Agreement 1.1
> Signed-off-by: Eric Jin <eric.jin@intel.com>
> Cc: Supreeth Venkatesh <supreeth.venkatesh@arm.com>
> ---
> .../IP4Config2/Include/Ip4Config2AssertionGuid.tcl | 5 +-
> .../TestCase/IP4Config2/SetData.Func1.Case2.tcl | 714 +++++++++++++
> .../Bin/TestCase/IP6Config/GetData.Conf1.Case1.tcl | 142 +--
> .../Bin/TestCase/IP6Config/GetData.Conf2.Case1.tcl | 140 +--
> .../Bin/TestCase/IP6Config/GetData.Conf3.Case1.tcl | 788 +++++++-------
> .../Bin/TestCase/IP6Config/GetData.Conf4.Case1.tcl | 144 +--
> .../Bin/TestCase/IP6Config/GetData.Conf5.Case1.tcl | 982 +++++++++---------
> .../Bin/TestCase/IP6Config/GetData.Func1.Case1.tcl | 542 +++++-----
> .../TestCase/IP6Config/Include/Ip6Config.inc.tcl | 192 ++--
> .../TestCase/IP6Config/Include/Ip6Config.proc.tcl | 30 +-
> .../IP6Config/Include/Ip6ConfigAssertionGuid.tcl | 180 ++--
> .../TestCase/IP6Config/Include/Ip6ConfigDefine.tcl | 102 +-
> .../IP6Config/RegisterDataNotify.Conf1.Case1.tcl | 178 ++--
> .../IP6Config/RegisterDataNotify.Conf2.Case1.tcl | 178 ++--
> .../IP6Config/RegisterDataNotify.Conf3.Case1.tcl | 216 ++--
> .../IP6Config/RegisterDataNotify.Func1.Case1.tcl | 1076 ++++++++++----------
> .../IP6Config/RegisterDataNotify.Func1.Case2.tcl | 530 +++++-----
> .../Bin/TestCase/IP6Config/SetData.Conf1.Case1.tcl | 142 +--
> .../Bin/TestCase/IP6Config/SetData.Conf2.Case1.tcl | 596 +++++------
> .../Bin/TestCase/IP6Config/SetData.Conf3.Case1.tcl | 142 +--
> .../Bin/TestCase/IP6Config/SetData.Conf4.Case1.tcl | 474 ++++-----
> .../Bin/TestCase/IP6Config/SetData.Conf5.Case1.tcl | 556 +++++-----
> .../Bin/TestCase/IP6Config/SetData.Conf6.Case1.tcl | 142 +--
> .../Bin/TestCase/IP6Config/SetData.Conf7.Case1.tcl | 1020 +++++++++----------
> .../Bin/TestCase/IP6Config/SetData.Func1.Case1.tcl | 546 +++++-----
> .../Bin/TestCase/IP6Config/SetData.Func2.Case1.tcl | 838 +++++++++++++++
> .../IP6Config/UnregisterDataNotify.Conf1.Case1.tcl | 178 ++--
> .../IP6Config/UnregisterDataNotify.Conf2.Case1.tcl | 164 +--
> .../IP6Config/UnregisterDataNotify.Conf2.Case2.tcl | 196 ++--
> .../IP6Config/UnregisterDataNotify.Func1.Case1.tcl | 194 ++--
> .../IP6Config/UnregisterDataNotify.Func1.Case2.tcl | 472 ++++-----
> 31 files changed, 6683 insertions(+), 5116 deletions(-)
> create mode 100644 uefi-sct/EMS/Bin/TestCase/IP4Config2/SetData.Func1.Case2.tcl
> create mode 100644 uefi-sct/EMS/Bin/TestCase/IP6Config/SetData.Func2.Case1.tcl
>
> diff --git a/uefi-sct/EMS/Bin/TestCase/IP4Config2/Include/Ip4Config2AssertionGuid.tcl b/uefi-sct/EMS/Bin/TestCase/IP4Config2/Include/Ip4Config2AssertionGuid.tcl
> index 91a4fd1..e0604b2 100644
> --- a/uefi-sct/EMS/Bin/TestCase/IP4Config2/Include/Ip4Config2AssertionGuid.tcl
> +++ b/uefi-sct/EMS/Bin/TestCase/IP4Config2/Include/Ip4Config2AssertionGuid.tcl
> @@ -1,6 +1,6 @@
> #
> # Copyright 2017 Unified EFI, Inc.<BR>
> -# Copyright (c) 2017, Intel Corporation. All rights reserved.<BR>
> +# Copyright (c) 2017 - 2018, Intel Corporation. All rights reserved.<BR>
> #
> # This program and the accompanying materials
> # are licensed and made available under the terms and conditions of the BSD License
> @@ -39,6 +39,9 @@ set Ip4Config2SetDataFunc1AssertionGuid008 00FBB58A-4BB3-499F-AE6B-744B6B9932E6
> set Ip4Config2SetDataFunc1AssertionGuid009 DB8EF05C-085F-45D1-A0B1-DC2F307B6F1E
> set Ip4Config2SetDataFunc1AssertionGuid010 29143621-896C-4FB9-9E70-7A4D2DA6BEE0
> set Ip4Config2SetDataFunc1AssertionGuid011 72FEDF83-6755-4212-AF0F-780F457EFAA7
> +set Ip4Config2SetDataFunc1AssertionGuid012 EB7769D1-A31F-4F37-86F3-2BBF54834785
> +set Ip4Config2SetDataFunc1AssertionGuid013 78F3A664-A8E4-43B8-961F-71033E9145F2
> +set Ip4Config2SetDataFunc1AssertionGuid014 7F717D50-3A7C-4E2A-9F15-0A802E9BAFE6
>
> #
> # Guid for GetData() interface
> diff --git a/uefi-sct/EMS/Bin/TestCase/IP4Config2/SetData.Func1.Case2.tcl b/uefi-sct/EMS/Bin/TestCase/IP4Config2/SetData.Func1.Case2.tcl
> new file mode 100644
> index 0000000..0517032
> --- /dev/null
> +++ b/uefi-sct/EMS/Bin/TestCase/IP4Config2/SetData.Func1.Case2.tcl
> @@ -0,0 +1,714 @@
> +#
> +# Copyright (c) 2018, Intel Corporation. All rights reserved.<BR>
> +#
> +# This program and the accompanying materials
> +# are licensed and made available under the terms and conditions of the BSD License
> +# which accompanies this distribution. The full text of the license may be found at
> +# http://opensource.org/licenses/bsd-license.php
> +#
> +# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> +# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
> +#
> +################################################################################
> +CaseLevel FUNCTION
> +CaseAttribute AUTO
> +CaseVerboseLevel DEFAULT
> +set reportfile report.csv
> +
> +#
> +# test case Name, category, description, GUID...
> +#
> +CaseGuid B2AD20DF-2325-42B2-A199-A49ADF04A5DD
> +CaseName SetData.Func1.Case2
> +CaseCategory IP4Config2
> +CaseDescription {SetData must succeed When DataSize is 0 and
> + Data is NULL,and existing configuration is cleared.}
> +
> +################################################################################
> +Include IP4Config2/Include/Ip4Config2.inc.tcl
> +
> +
> +#
> +# Begin log ...
> +#
> +BeginLog
> +
> +#
> +# BeginScope
> +#
> +BeginScope _IP4CONFIG2_SETDATA_FUNC1_CASE2
> +
> +#
> +# Parameter Definition
> +# R_ represents "Remote EFI Side Parameter"
> +# L_ represents "Local ENTS Side Parameter"
> +#
> +#
> +# Parameter Definition
> +# R_ represents "Remote EFI Side Parameter"
> +# L_ represents "Local ENTS Side Parameter"
> +#
> +UINTN R_Status
> +UINTN R_Context
> +UINTN R_DoneEvent
> +UINTN R_Ip4Config2DataSize
> +UINT32 R_Ip4Config2DataType
> +UINT32 R_Ip4Config2Policy
> +
> +#
> +# Check Point: Call Ip4Config2->SetData to set Static policy
> +#
> +SetVar R_Ip4Config2DataType $IP4C2DT(Policy)
> +SetVar R_Ip4Config2DataSize [Sizeof UINT32]
> +SetVar R_Ip4Config2Policy $IP4C2P(Static)
> +
> +SetVar R_Context 0
> +BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context,\
> + &@R_DoneEvent, &@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "BS.CreateEvent." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +Ip4Config2->RegisterDataNotify "@R_Ip4Config2DataType,@R_DoneEvent,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip4Config2.RegisterDataNotify - Register notification event for configuration." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +Ip4Config2->SetData "@R_Ip4Config2DataType,@R_Ip4Config2DataSize,&@R_Ip4Config2Policy,&@R_Status"
> +GetAck
> +GetVar R_Status
> +if { $R_Status == $EFI_SUCCESS } {
> + set assert pass
> + RecordAssertion $assert $Ip4Config2SetDataFunc1AssertionGuid001 \
> + "Ip4Config2.SetData - Call SetData to set Static policy." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +} elseif { $R_Status == $EFI_NOT_READY } {
> + set i 0
> + set L_TimeOut 30
> + while { 1 > 0 } {
> + GetVar R_Context
> + if { $R_Context == 1 } {
> + break
> + } elseif { $i == $L_TimeOut } {
> + set assert fail
> + RecordAssertion $assert $Ip4Config2SetDataFunc1AssertionGuid001 \
> + "SetData failed.(event hasn't been signaled before TIMEOUT)." \
> + "TIMEOUT value is $L_TimeOut (sec), "
> + SetVar R_Ip4Config2DataType $IP4C2DT(Policy)
> + Ip4Config2->UnregisterDataNotify "@R_Ip4Config2DataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP4CONFIG2_SETDATA_FUNC1_CASE2
> + EndLog
> + return
> + }
> + incr i
> + Stall 1
> + }
> +} else {
> + set assert fail
> + RecordAssertion $assert $Ip4Config2SetDataFunc1AssertionGuid001 \
> + "Ip4Config2.SetData - Call SetData to set Static policy." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> + SetVar R_Ip4Config2DataType $IP4C2DT(Policy)
> + Ip4Config2->UnregisterDataNotify "@R_Ip4Config2DataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP4CONFIG2_SETDATA_FUNC1_CASE2
> + EndLog
> + return
> +}
> +
> +
> +Ip4Config2->GetData "@R_Ip4Config2DataType,&@R_Ip4Config2DataSize,&@R_Ip4Config2Policy,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip4Config2.GetData - Call GetData to get policy value." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +GetVar R_Ip4Config2Policy
> +if { $R_Ip4Config2Policy == $IP4C2P(Static) } {
> + set assert pass
> +} else {
> + set assert fail
> +
> + RecordAssertion $assert $Ip4Config2SetDataFunc1AssertionGuid002 \
> + "Set Static policy succeeds(event is signaled correctly and data correct)."
> + SetVar R_Ip4Config2Policy $IP4C2DT(Policy)
> + Ip4Config2->UnregisterDataNotify "@R_Ip4Config2DataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP4CONFIG2_SETDATA_FUNC1_CASE2
> + EndLog
> + return
> +}
> +
> +Ip4Config2->UnregisterDataNotify "@R_Ip4Config2DataType,@R_DoneEvent,&@R_Status"
> +GetAck
> +RecordAssertion $assert $Ip4Config2SetDataFunc1AssertionGuid002 \
> + "Set Static policy succeeds(event is signaled correctly and data correct)."
> +
> +#
> +# Check Point : Set Manual Address
> +#
> +EFI_IP4_CONFIG2_MANUAL_ADDRESS R_Temp_Ip4Config2ManualAddress
> +EFI_IP4_CONFIG2_MANUAL_ADDRESS R_Ip4Config2ManualAddress
> +SetVar R_Ip4Config2DataType $IP4C2DT(ManualAddress)
> +SetVar R_Ip4Config2DataSize [Sizeof EFI_IP4_CONFIG2_MANUAL_ADDRESS]
> +SetIpv4Address R_Temp_Ip4Config2ManualAddress.Address "10.239.9.15"
> +SetIpv4Address R_Temp_Ip4Config2ManualAddress.SubnetMask "255.255.255.0"
> +SetVar R_Ip4Config2ManualAddress @R_Temp_Ip4Config2ManualAddress
> +
> +SetVar R_Context 0
> +Ip4Config2->RegisterDataNotify "@R_Ip4Config2DataType,@R_DoneEvent,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip4Config2.RegisterDataNotify - Register notification event for configuration." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +
> +Ip4Config2->SetData "@R_Ip4Config2DataType,@R_Ip4Config2DataSize,&@R_Ip4Config2ManualAddress,&@R_Status"
> +GetAck
> +GetVar R_Status
> +
> +if { $R_Status == $EFI_SUCCESS } {
> + set assert pass
> + RecordAssertion $assert $Ip4Config2SetDataFunc1AssertionGuid003 \
> + "Ip4Config2.SetData - Call SetData to set Manual Address." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +} elseif { $R_Status == $EFI_NOT_READY } {
> + set i 0
> + set L_TimeOut 30
> + while { 1 > 0 } {
> + GetVar R_Context
> + if { $R_Context == 1 } {
> + break
> + } elseif { $i == $L_TimeOut } {
> + set assert fail
> + RecordAssertion $assert $Ip4Config2SetDataFunc1AssertionGuid003 \
> + "SetData failed.(event hasn't been signaled before TIMEOUT)." \
> + "TIMEOUT value is $L_TimeOut (sec), "
> + SetVar R_Ip4Config2DataType $IP4C2DT(ManualAddress)
> + Ip4Config2->UnregisterDataNotify "@R_Ip4Config2DataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP4CONFIG2_SETDATA_FUNC1_CASE2
> + EndLog
> + return
> + }
> + incr i
> + Stall 1
> + }
> +} else {
> + set assert fail
> + RecordAssertion $assert $Ip4Config2SetDataFunc1AssertionGuid003 \
> + "IP4Config2.SetData - Call SetData to set Manual Address." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> + SetVar R_Ip4Config2DataType $IP4C2DT(ManualAddress)
> + Ip4Config2->UnregisterDataNotify "@R_Ip4Config2DataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP4CONFIG2_SETDATA_FUNC1_CASE2
> + EndLog
> + return
> +}
> +
> +
> +Ip4Config2->GetData "@R_Ip4Config2DataType,&@R_Ip4Config2DataSize,&@R_Ip4Config2ManualAddress,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip4Config2.GetData - Call GetData to get Manual Address." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +
> +EFI_IPv4_ADDRESS R_Addr1
> +EFI_IPv4_ADDRESS R_Addr2
> +set R_Addr1 [GetIpv4Address R_Ip4Config2ManualAddress.Address]
> +puts "R_Addr1 - $R_Addr1"
> +set R_Addr2 [GetIpv4Address R_Ip4Config2ManualAddress.SubnetMask]
> +puts "R_Addr1 - $R_Addr2"
> +
> +if {[string compare -nocase $R_Addr1 10.239.9.15] == 0} {
> + if {[string compare -nocase $R_Addr2 255.255.255.0] == 0} {
> + set assert pass
> + } else {
> + set assert fail
> + RecordAssertion $assert $Ip4Config2SetDataFunc1AssertionGuid004 \
> + "Set ManualAddress succeeds(event is signaled correctly and data correct)."
> + Ip4Config2->UnregisterDataNotify "@R_Ip4Config2DataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP4CONFIG2_SETDATA_FUNC1_CASE2
> + EndLog
> + return
> + }
> +} else {
> + set assert fail
> +
> + RecordAssertion $assert $Ip4Config2SetDataFunc1AssertionGuid004 \
> + "Set ManualAddress succeeds(event is signaled correctly and data correct)."
> + Ip4Config2->UnregisterDataNotify "@R_Ip4Config2DataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP4CONFIG2_SETDATA_FUNC1_CASE2
> + EndLog
> + return
> +}
> +
> +Ip4Config2->UnregisterDataNotify "@R_Ip4Config2DataType,@R_DoneEvent,&@R_Status"
> +GetAck
> +RecordAssertion $assert $Ip4Config2SetDataFunc1AssertionGuid004 \
> + "Set ManualAddress succeeds(event is signaled correctly and data correct)."
> +
> +#
> +# Check Points : Set Gateway
> +#
> +EFI_IPv4_ADDRESS R_Ip4Config2Gateway
> +SetVar R_Ip4Config2DataType $IP4C2DT(Gateway)
> +SetVar R_Ip4Config2DataSize [Sizeof EFI_IPv4_ADDRESS]
> +SetIpv4Address R_Ip4Config2Gateway "10.239.9.241"
> +
> +SetVar R_Context 0
> +Ip4Config2->RegisterDataNotify "@R_Ip4Config2DataType,@R_DoneEvent,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip4Config2.RegisterDataNotify - Register notification event for configuration." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +Ip4Config2->SetData "@R_Ip4Config2DataType,@R_Ip4Config2DataSize,&@R_Ip4Config2Gateway,&@R_Status"
> +GetAck
> +GetVar R_Status
> +
> +if { $R_Status == $EFI_SUCCESS } {
> + set assert pass
> + RecordAssertion $assert $Ip4Config2SetDataFunc1AssertionGuid005 \
> + "Ip4Config2.SetData - Call SetData to set Gateway Address." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +} elseif { $R_Status == $EFI_NOT_READY } {
> + set i 0
> + set L_TimeOut 30
> + while { 1 > 0 } {
> + GetVar R_Context
> + if { $R_Context == 1 } {
> + break
> + } elseif { $i == $L_TimeOut } {
> + set assert fail
> + RecordAssertion $assert $Ip4Config2SetDataFunc1AssertionGuid005 \
> + "SetData failed.(event hasn't been signaled before TIMEOUT)." \
> + "TIMEOUT value is $L_TimeOut (sec), "
> + Ip4Config2->UnregisterDataNotify "@R_Ip4Config2DataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP4CONFIG2_SETDATA_FUNC1_CASE2
> + EndLog
> + return
> + }
> + incr i
> + Stall 1
> + }
> +} else {
> + set assert fail
> + RecordAssertion $assert $Ip4Config2SetDataFunc1AssertionGuid005 \
> + "Ip4Config2.SetData - Call SetData to set Gateway Address." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> + Ip4Config2->UnregisterDataNotify "@R_Ip4Config2DataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP4CONFIG2_SETDATA_FUNC1_CASE2
> + EndLog
> + return
> +}
> +
> +
> +Ip4Config2->GetData "@R_Ip4Config2DataType,&@R_Ip4Config2DataSize,&@R_Ip4Config2Gateway,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip4Config2.GetData - Call GetData to get Gateway Address." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +EFI_IPv4_ADDRESS R_Addr3
> +set R_Addr3 [GetIpv4Address R_Ip4Config2Gateway]
> +puts "R_Addr3 - $R_Addr3"
> +
> +if {[string compare -nocase $R_Addr3 10.239.9.241] == 0} {
> + set assert pass
> +} else {
> + set assert fail
> +
> + RecordAssertion $assert $Ip4Config2SetDataFunc1AssertionGuid006 \
> + "Set Gateway succeeds(event is signaled correctly and data correct)."
> + Ip4Config2->UnregisterDataNotify "@R_Ip4Config2DataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP4CONFIG2_SETDATA_FUNC1_CASE2
> + EndLog
> + return
> +}
> +
> +Ip4Config2->UnregisterDataNotify "@R_Ip4Config2DataType,@R_DoneEvent,&@R_Status"
> +GetAck
> +RecordAssertion $assert $Ip4Config2SetDataFunc1AssertionGuid006 \
> + "Set Gateway succeeds(event is signaled correctly and data correct)."
> +
> +#
> +# Check Point : Set Dns Server
> +#
> +EFI_IPv4_ADDRESS R_Ip4Config2DnsServer
> +SetVar R_Ip4Config2DataType $IP4C2DT(DnsServer)
> +SetVar R_Ip4Config2DataSize [Sizeof EFI_IPv4_ADDRESS]
> +SetIpv4Address R_Ip4Config2DnsServer "10.248.2.5"
> +
> +SetVar R_Context 0
> +Ip4Config2->RegisterDataNotify "@R_Ip4Config2DataType,@R_DoneEvent,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip4Config2.RegisterDataNotify - Register notification event for configuration." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +Ip4Config2->SetData "@R_Ip4Config2DataType,@R_Ip4Config2DataSize,&@R_Ip4Config2DnsServer,&@R_Status"
> +GetAck
> +GetVar R_Status
> +
> +if { $R_Status == $EFI_SUCCESS } {
> + set assert pass
> + RecordAssertion $assert $Ip4Config2SetDataFunc1AssertionGuid007 \
> + "Ip4Config2.SetData - Call SetData to set Dns Address." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +} elseif { $R_Status == $EFI_NOT_READY } {
> + set i 0
> + set L_TimeOut 30
> + while { 1 > 0 } {
> + GetVar R_Context
> + if { $R_Context == 1 } {
> + break
> + } elseif { $i == $L_TimeOut } {
> + set assert fail
> + RecordAssertion $assert $Ip4Config2SetDataFunc1AssertionGuid007 \
> + "SetData failed.(event hasn't been signaled before TIMEOUT)." \
> + "TIMEOUT value is $L_TimeOut (sec), "
> + Ip4Config2->UnregisterDataNotify "@R_Ip4Config2DataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP4CONFIG2_SETDATA_FUNC1_CASE2
> + EndLog
> + return
> + }
> + incr i
> + Stall 1
> + }
> +} else {
> + set assert fail
> + RecordAssertion $assert $Ip4Config2SetDataFunc1AssertionGuid007 \
> + "Ip4Config2.SetData - Call SetData to set Dns Address." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> + Ip4Config2->UnregisterDataNotify "@R_Ip4Config2DataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP4CONFIG2_SETDATA_FUNC1_CASE2
> + EndLog
> + return
> +}
> +
> +
> +Ip4Config2->GetData "@R_Ip4Config2DataType,&@R_Ip4Config2DataSize,&@R_Ip4Config2DnsServer,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip4Config2.GetData - Call GetData to get Dns Address." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +EFI_IPv4_ADDRESS R_Addr4
> +set R_Addr4 [GetIpv4Address R_Ip4Config2DnsServer]
> +puts "R_Addr4 - $R_Addr4"
> +
> +if {[string compare -nocase $R_Addr4 10.248.2.5] == 0} {
> + set assert pass
> +} else {
> + set assert fail
> +
> + RecordAssertion $assert $Ip4Config2SetDataFunc1AssertionGuid008 \
> + "Set Dns succeeds(event is signaled correctly and data correct)."
> + Ip4Config2->UnregisterDataNotify "@R_Ip4Config2DataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP4CONFIG2_SETDATA_FUNC1_CASE2
> + EndLog
> + return
> +}
> +
> +Ip4Config2->UnregisterDataNotify "@R_Ip4Config2DataType,@R_DoneEvent,&@R_Status"
> +GetAck
> +RecordAssertion $assert $Ip4Config2SetDataFunc1AssertionGuid008 \
> + "Set Dns succeeds(event is signaled correctly and data correct)."
> +
> +
> +
> +#
> +# Clean up - Call SetData when DataSize is 0 and Data is NULL
> +#
> +
> +
> +
> +#
> +# Set Manual Address
> +#
> +
> +SetVar R_Ip4Config2DataType $IP4C2DT(ManualAddress)
> +SetVar R_Ip4Config2DataSize 0
> +
> +
> +
> +SetVar R_Context 0
> +Ip4Config2->RegisterDataNotify "@R_Ip4Config2DataType,@R_DoneEvent,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip4Config2.RegisterDataNotify - Register notification event for configuration." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +
> +Ip4Config2->SetData "@R_Ip4Config2DataType,@R_Ip4Config2DataSize,NULL,&@R_Status"
> +GetAck
> +GetVar R_Status
> +
> +if { $R_Status == $EFI_SUCCESS } {
> + set assert pass
> + RecordAssertion $assert $Ip4Config2SetDataFunc1AssertionGuid012 \
> + "Ip4Config2.SetData - Call SetData to clear Manual Address." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +} elseif { $R_Status == $EFI_NOT_READY } {
> + set i 0
> + set L_TimeOut 30
> + while { 1 > 0 } {
> + GetVar R_Context
> + if { $R_Context == 1 } {
> + break
> + } elseif { $i == $L_TimeOut } {
> + set assert fail
> + RecordAssertion $assert $Ip4Config2SetDataFunc1AssertionGuid012 \
> + "SetData to clear Manual Address failed.(event hasn't been signaled before TIMEOUT)." \
> + "TIMEOUT value is $L_TimeOut (sec), "
> + SetVar R_Ip4Config2DataType $IP4C2DT(ManualAddress)
> + Ip4Config2->UnregisterDataNotify "@R_Ip4Config2DataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP4CONFIG2_SETDATA_FUNC1_CASE2
> + EndLog
> + return
> + }
> + incr i
> + Stall 1
> + }
> +} else {
> + set assert fail
> + RecordAssertion $assert $Ip4Config2SetDataFunc1AssertionGuid012 \
> + "IP4Config2.SetData - Call SetData to clear Manual Address." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> + SetVar R_Ip4Config2DataType $IP4C2DT(ManualAddress)
> + Ip4Config2->UnregisterDataNotify "@R_Ip4Config2DataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP4CONFIG2_SETDATA_FUNC1_CASE2
> + EndLog
> + return
> +}
> +
> +Ip4Config2->UnregisterDataNotify "@R_Ip4Config2DataType,@R_DoneEvent,&@R_Status"
> +GetAck
> +BS->CloseEvent {@R_DoneEvent,&@R_Status}
> +GetAck
> +
> +SetVar R_Ip4Config2DataSize [Sizeof EFI_IP4_CONFIG2_MANUAL_ADDRESS]
> +Ip4Config2->GetData "@R_Ip4Config2DataType,&@R_Ip4Config2DataSize,&@R_Ip4Config2ManualAddress,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_NOT_FOUND]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip4Config2.GetData - Call GetData to get Manual Address." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_NOT_FOUND"
> +
> +#
> +# Set Gateway Address
> +#
> +
> +
> +SetVar R_Ip4Config2DataType $IP4C2DT(Gateway)
> +SetVar R_Ip4Config2DataSize 0
> +
> +SetVar R_Context 0
> +Ip4Config2->RegisterDataNotify "@R_Ip4Config2DataType,@R_DoneEvent,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip4Config2.RegisterDataNotify - Register notification event for configuration." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +Ip4Config2->SetData "@R_Ip4Config2DataType,@R_Ip4Config2DataSize,NULL,&@R_Status"
> +GetAck
> +GetVar R_Status
> +
> +if { $R_Status == $EFI_SUCCESS } {
> + set assert pass
> + RecordAssertion $assert $Ip4Config2SetDataFunc1AssertionGuid013 \
> + "Ip4Config2.SetData - Call SetData to clear Gateway Address." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +} elseif { $R_Status == $EFI_NOT_READY } {
> + set i 0
> + set L_TimeOut 30
> + while { 1 > 0 } {
> + GetVar R_Context
> + if { $R_Context == 1 } {
> + break
> + } elseif { $i == $L_TimeOut } {
> + set assert fail
> + RecordAssertion $assert $Ip4Config2SetDataFunc1AssertionGuid013 \
> + "SetData to clear Gateway Address failed.(event hasn't been signaled before TIMEOUT)." \
> + "TIMEOUT value is $L_TimeOut (sec), "
> + Ip4Config2->UnregisterDataNotify "@R_Ip4Config2DataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP4CONFIG2_SETDATA_FUNC1_CASE2
> + EndLog
> + return
> + }
> + incr i
> + Stall 1
> + }
> +} else {
> + set assert fail
> + RecordAssertion $assert $Ip4Config2SetDataFunc1AssertionGuid013 \
> + "Ip4Config2.SetData - Call SetData to clear Gateway Address." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> + Ip4Config2->UnregisterDataNotify "@R_Ip4Config2DataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP4CONFIG2_SETDATA_FUNC1_CASE2
> + EndLog
> + return
> +}
> +
> +Ip4Config2->UnregisterDataNotify "@R_Ip4Config2DataType,@R_DoneEvent,&@R_Status"
> +GetAck
> +BS->CloseEvent {@R_DoneEvent,&@R_Status}
> +GetAck
> +
> +SetVar R_Ip4Config2DataSize [Sizeof EFI_IPv4_ADDRESS]
> +Ip4Config2->GetData "@R_Ip4Config2DataType,&@R_Ip4Config2DataSize,&@R_Ip4Config2Gateway,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_NOT_FOUND]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip4Config2.GetData - Call GetData to get Gateway Address." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_NOT_FOUND"
> +
> +
> +#
> +# Check Point : Set Dns Server
> +#
> +
> +SetVar R_Ip4Config2DataType $IP4C2DT(DnsServer)
> +SetVar R_Ip4Config2DataSize 0
> +
> +SetVar R_Context 0
> +Ip4Config2->RegisterDataNotify "@R_Ip4Config2DataType,@R_DoneEvent,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip4Config2.RegisterDataNotify - Register notification event for configuration." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +Ip4Config2->SetData "@R_Ip4Config2DataType,@R_Ip4Config2DataSize,NULL,&@R_Status"
> +GetAck
> +GetVar R_Status
> +
> +if { $R_Status == $EFI_SUCCESS } {
> + set assert pass
> + RecordAssertion $assert $Ip4Config2SetDataFunc1AssertionGuid014 \
> + "Ip4Config2.SetData - Call SetData to clear Dns Address." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +} elseif { $R_Status == $EFI_NOT_READY } {
> + set i 0
> + set L_TimeOut 30
> + while { 1 > 0 } {
> + GetVar R_Context
> + if { $R_Context == 1 } {
> + break
> + } elseif { $i == $L_TimeOut } {
> + set assert fail
> + RecordAssertion $assert $Ip4Config2SetDataFunc1AssertionGuid014 \
> + "SetData to clear Dns Address failed.(event hasn't been signaled before TIMEOUT)." \
> + "TIMEOUT value is $L_TimeOut (sec), "
> + Ip4Config2->UnregisterDataNotify "@R_Ip4Config2DataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP4CONFIG2_SETDATA_FUNC1_CASE2
> + EndLog
> + return
> + }
> + incr i
> + Stall 1
> + }
> +} else {
> + set assert fail
> + RecordAssertion $assert $Ip4Config2SetDataFunc1AssertionGuid014 \
> + "Ip4Config2.SetData - Call SetData to clear Dns Address." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> + Ip4Config2->UnregisterDataNotify "@R_Ip4Config2DataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP4CONFIG2_SETDATA_FUNC1_CASE2
> + EndLog
> + return
> +}
> +
> +Ip4Config2->UnregisterDataNotify "@R_Ip4Config2DataType,@R_DoneEvent,&@R_Status"
> +GetAck
> +BS->CloseEvent {@R_DoneEvent,&@R_Status}
> +GetAck
> +
> +SetVar R_Ip4Config2DataSize [Sizeof EFI_IPv4_ADDRESS]
> +Ip4Config2->GetData "@R_Ip4Config2DataType,&@R_Ip4Config2DataSize,&@R_Ip4Config2DnsServer,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_NOT_FOUND]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip4Config2.GetData - Call GetData to get Dns Address." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_NOT_FOUND"
> +
> +
> +
> +EndScope _IP4CONFIG2_SETDATA_FUNC1_CASE2
> +
> +EndLog
> \ No newline at end of file
> diff --git a/uefi-sct/EMS/Bin/TestCase/IP6Config/GetData.Conf1.Case1.tcl b/uefi-sct/EMS/Bin/TestCase/IP6Config/GetData.Conf1.Case1.tcl
> index a6b788d..beeb2fb 100644
> --- a/uefi-sct/EMS/Bin/TestCase/IP6Config/GetData.Conf1.Case1.tcl
> +++ b/uefi-sct/EMS/Bin/TestCase/IP6Config/GetData.Conf1.Case1.tcl
> @@ -1,72 +1,72 @@
> -#
> -# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
> -# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
> -#
> -# This program and the accompanying materials
> -# are licensed and made available under the terms and conditions of the BSD License
> -# which accompanies this distribution. The full text of the license may be found at
> -# http://opensource.org/licenses/bsd-license.php
> -#
> -# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> -# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
> -#
> -################################################################################
> -CaseLevel CONFORMANCE
> -CaseAttribute AUTO
> -CaseVerboseLevel DEFAULT
> -set reportfile report.csv
> -
> -#
> -# test case Name, category, description, GUID...
> -#
> -CaseGuid 11FF93B5-8A85-4770-88C2-99E0AF9AE0AA
> -CaseName GetData.Conf1.Case1
> -CaseCategory IP6Config
> -CaseDescription {GetData must not succeed when data size is NULL.}
> -
> -################################################################################
> -Include IP6Config/Include/Ip6Config.inc.tcl
> -
> -
> -#
> -# Begin log ...
> -#
> -BeginLog
> -
> -#
> -# BeginScope
> -#
> -BeginScope _IP6CONFIG_GETDATA_CONF1
> -
> -#
> -# Parameter Definition
> -# R_ represents "Remote EFI Side Parameter"
> -# L_ represents "Local ENTS Side Parameter"
> -#
> -UINTN R_Status
> -UINTN R_Context
> -UINTN R_DoneEvent
> -UINTN R_Ip6ConfigDataSize
> -EFI_IP6_CONFIG_INTERFACE_INFO R_Ip6ConfigInterfaceInfo
> -EFI_IP6_CONFIG_INTERFACE_ID R_Ip6ConfigInterfaceId
> -UINT32 R_Ip6ConfigPolicy
> -UINT32 R_Ip6ConfigDataType
> -EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS R_Ip6ConfigDadTransmits
> -EFI_IP6_CONFIG_MANUAL_ADDRESS R_Ip6ConfigManualAddress
> -
> -#
> -# Check Point: Call Ip6Config->GetData with datasize is NULL.
> -#
> -SetVar R_Ip6ConfigDataType $IP6CDT(InterfaceInfo)
> -SetVar R_Ip6ConfigDataSize [Sizeof EFI_IP6_CONFIG_INTERFACE_INFO]
> -
> -Ip6Config->GetData "@R_Ip6ConfigDataType,NULL,&@R_Ip6ConfigInterfaceInfo,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_INVALID_PARAMETER]
> -RecordAssertion $assert $Ip6ConfigGetDataConf1AssertionGuid001 \
> - "Ip6Config.GetData - Call GetData with DataSize NULL." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_INVALID_PARAMETER"
> -
> -EndScope _IP6CONFIG_GETDATA_CONF1
> -
> +#
> +# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
> +# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
> +#
> +# This program and the accompanying materials
> +# are licensed and made available under the terms and conditions of the BSD License
> +# which accompanies this distribution. The full text of the license may be found at
> +# http://opensource.org/licenses/bsd-license.php
> +#
> +# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> +# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
> +#
> +################################################################################
> +CaseLevel CONFORMANCE
> +CaseAttribute AUTO
> +CaseVerboseLevel DEFAULT
> +set reportfile report.csv
> +
> +#
> +# test case Name, category, description, GUID...
> +#
> +CaseGuid 11FF93B5-8A85-4770-88C2-99E0AF9AE0AA
> +CaseName GetData.Conf1.Case1
> +CaseCategory IP6Config
> +CaseDescription {GetData must not succeed when data size is NULL.}
> +
> +################################################################################
> +Include IP6Config/Include/Ip6Config.inc.tcl
> +
> +
> +#
> +# Begin log ...
> +#
> +BeginLog
> +
> +#
> +# BeginScope
> +#
> +BeginScope _IP6CONFIG_GETDATA_CONF1
> +
> +#
> +# Parameter Definition
> +# R_ represents "Remote EFI Side Parameter"
> +# L_ represents "Local ENTS Side Parameter"
> +#
> +UINTN R_Status
> +UINTN R_Context
> +UINTN R_DoneEvent
> +UINTN R_Ip6ConfigDataSize
> +EFI_IP6_CONFIG_INTERFACE_INFO R_Ip6ConfigInterfaceInfo
> +EFI_IP6_CONFIG_INTERFACE_ID R_Ip6ConfigInterfaceId
> +UINT32 R_Ip6ConfigPolicy
> +UINT32 R_Ip6ConfigDataType
> +EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS R_Ip6ConfigDadTransmits
> +EFI_IP6_CONFIG_MANUAL_ADDRESS R_Ip6ConfigManualAddress
> +
> +#
> +# Check Point: Call Ip6Config->GetData with datasize is NULL.
> +#
> +SetVar R_Ip6ConfigDataType $IP6CDT(InterfaceInfo)
> +SetVar R_Ip6ConfigDataSize [Sizeof EFI_IP6_CONFIG_INTERFACE_INFO]
> +
> +Ip6Config->GetData "@R_Ip6ConfigDataType,NULL,&@R_Ip6ConfigInterfaceInfo,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_INVALID_PARAMETER]
> +RecordAssertion $assert $Ip6ConfigGetDataConf1AssertionGuid001 \
> + "Ip6Config.GetData - Call GetData with DataSize NULL." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_INVALID_PARAMETER"
> +
> +EndScope _IP6CONFIG_GETDATA_CONF1
> +
> EndLog
> \ No newline at end of file
> diff --git a/uefi-sct/EMS/Bin/TestCase/IP6Config/GetData.Conf2.Case1.tcl b/uefi-sct/EMS/Bin/TestCase/IP6Config/GetData.Conf2.Case1.tcl
> index c095756..6f90a9c 100644
> --- a/uefi-sct/EMS/Bin/TestCase/IP6Config/GetData.Conf2.Case1.tcl
> +++ b/uefi-sct/EMS/Bin/TestCase/IP6Config/GetData.Conf2.Case1.tcl
> @@ -1,71 +1,71 @@
> -#
> -# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
> -# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
> -#
> -# This program and the accompanying materials
> -# are licensed and made available under the terms and conditions of the BSD License
> -# which accompanies this distribution. The full text of the license may be found at
> -# http://opensource.org/licenses/bsd-license.php
> -#
> -# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> -# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
> -#
> -################################################################################
> -CaseLevel CONFORMANCE
> -CaseAttribute AUTO
> -CaseVerboseLevel DEFAULT
> -set reportfile report.csv
> -
> -#
> -# test case Name, category, description, GUID...
> -#
> -CaseGuid B4C48D71-EF72-42e0-BD57-4825F7EB7B9F
> -CaseName GetData.Conf2.Case1
> -CaseCategory IP6Config
> -CaseDescription {GetData must not succeed when data is NULL if data size is not zero.}
> -
> -################################################################################
> -Include IP6Config/Include/Ip6Config.inc.tcl
> -
> -
> -#
> -# Begin log ...
> -#
> -BeginLog
> -
> -#
> -# BeginScope
> -#
> -BeginScope _IP6CONFIG_GETDATA_CONF2
> -
> -#
> -# Parameter Definition
> -# R_ represents "Remote EFI Side Parameter"
> -# L_ represents "Local ENTS Side Parameter"
> -#
> -UINTN R_Status
> -UINTN R_Context
> -UINTN R_DoneEvent
> -UINTN R_Ip6ConfigDataSize
> -UINT32 R_Ip6ConfigDataType
> -EFI_IP6_CONFIG_INTERFACE_INFO R_Ip6ConfigInterfaceInfo
> -EFI_IP6_CONFIG_INTERFACE_ID R_Ip6ConfigInterfaceId
> -EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS R_Ip6ConfigDadTransmits
> -EFI_IP6_CONFIG_MANUAL_ADDRESS R_Ip6ConfigManualAddress
> -
> -#
> -# Check Point: Call Ip6Config->GetData with data is NULL.
> -#
> -SetVar R_Ip6ConfigDataType $IP6CDT(InterfaceInfo)
> -SetVar R_Ip6ConfigDataSize [Sizeof EFI_IP6_CONFIG_INTERFACE_INFO]
> -
> -Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,NULL,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_INVALID_PARAMETER]
> -RecordAssertion $assert $Ip6ConfigGetDataConf2AssertionGuid001 \
> - "Ip6Config.GetData - Call GetData with Data NULL." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_INVALID_PARAMETER"
> -
> -EndScope _IP6CONFIG_GETDATA_CONF2
> -
> +#
> +# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
> +# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
> +#
> +# This program and the accompanying materials
> +# are licensed and made available under the terms and conditions of the BSD License
> +# which accompanies this distribution. The full text of the license may be found at
> +# http://opensource.org/licenses/bsd-license.php
> +#
> +# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> +# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
> +#
> +################################################################################
> +CaseLevel CONFORMANCE
> +CaseAttribute AUTO
> +CaseVerboseLevel DEFAULT
> +set reportfile report.csv
> +
> +#
> +# test case Name, category, description, GUID...
> +#
> +CaseGuid B4C48D71-EF72-42e0-BD57-4825F7EB7B9F
> +CaseName GetData.Conf2.Case1
> +CaseCategory IP6Config
> +CaseDescription {GetData must not succeed when data is NULL if data size is not zero.}
> +
> +################################################################################
> +Include IP6Config/Include/Ip6Config.inc.tcl
> +
> +
> +#
> +# Begin log ...
> +#
> +BeginLog
> +
> +#
> +# BeginScope
> +#
> +BeginScope _IP6CONFIG_GETDATA_CONF2
> +
> +#
> +# Parameter Definition
> +# R_ represents "Remote EFI Side Parameter"
> +# L_ represents "Local ENTS Side Parameter"
> +#
> +UINTN R_Status
> +UINTN R_Context
> +UINTN R_DoneEvent
> +UINTN R_Ip6ConfigDataSize
> +UINT32 R_Ip6ConfigDataType
> +EFI_IP6_CONFIG_INTERFACE_INFO R_Ip6ConfigInterfaceInfo
> +EFI_IP6_CONFIG_INTERFACE_ID R_Ip6ConfigInterfaceId
> +EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS R_Ip6ConfigDadTransmits
> +EFI_IP6_CONFIG_MANUAL_ADDRESS R_Ip6ConfigManualAddress
> +
> +#
> +# Check Point: Call Ip6Config->GetData with data is NULL.
> +#
> +SetVar R_Ip6ConfigDataType $IP6CDT(InterfaceInfo)
> +SetVar R_Ip6ConfigDataSize [Sizeof EFI_IP6_CONFIG_INTERFACE_INFO]
> +
> +Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,NULL,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_INVALID_PARAMETER]
> +RecordAssertion $assert $Ip6ConfigGetDataConf2AssertionGuid001 \
> + "Ip6Config.GetData - Call GetData with Data NULL." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_INVALID_PARAMETER"
> +
> +EndScope _IP6CONFIG_GETDATA_CONF2
> +
> EndLog
> \ No newline at end of file
> diff --git a/uefi-sct/EMS/Bin/TestCase/IP6Config/GetData.Conf3.Case1.tcl b/uefi-sct/EMS/Bin/TestCase/IP6Config/GetData.Conf3.Case1.tcl
> index c90d442..5688648 100644
> --- a/uefi-sct/EMS/Bin/TestCase/IP6Config/GetData.Conf3.Case1.tcl
> +++ b/uefi-sct/EMS/Bin/TestCase/IP6Config/GetData.Conf3.Case1.tcl
> @@ -1,395 +1,395 @@
> -#
> -# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
> -# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
> -#
> -# This program and the accompanying materials
> -# are licensed and made available under the terms and conditions of the BSD License
> -# which accompanies this distribution. The full text of the license may be found at
> -# http://opensource.org/licenses/bsd-license.php
> -#
> -# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> -# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
> -#
> -################################################################################
> -CaseLevel CONFORMANCE
> -CaseAttribute AUTO
> -CaseVerboseLevel DEFAULT
> -set reportfile report.csv
> -
> -#
> -# test case Name, category, description, GUID...
> -#
> -CaseGuid 7B341FC4-1F10-4851-83AD-103A56B0EC35
> -CaseName GetData.Conf3.Case1
> -CaseCategory IP6Config
> -CaseDescription {GetData must not succeed when DataSize is too small for the data type.}
> -
> -################################################################################
> -Include IP6Config/Include/Ip6Config.inc.tcl
> -
> -
> -#
> -# Begin log ...
> -#
> -BeginLog
> -
> -#
> -# BeginScope
> -#
> -BeginScope _IP6CONFIG_GETDATA_CONF3
> -
> -#
> -# Parameter Definition
> -# R_ represents "Remote EFI Side Parameter"
> -# L_ represents "Local ENTS Side Parameter"
> -#
> -UINTN R_Status
> -UINTN R_Context
> -UINTN R_Context1
> -UINTN R_DoneEvent
> -UINTN R_DoneEvent1
> -UINTN R_Ip6ConfigDataSize
> -UINT32 R_Ip6ConfigDataType
> -EFI_IP6_CONFIG_INTERFACE_INFO R_Ip6ConfigInterfaceInfo
> -EFI_IP6_CONFIG_INTERFACE_ID R_Ip6ConfigInterfaceId
> -UINT32 R_Ip6ConfigPolicy
> -EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS R_Ip6ConfigDadTransmits
> -
> -#
> -# Check Point: Call Ip6Config->SetData to set manual policy
> -#
> -SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> -SetVar R_Ip6ConfigDataSize [Sizeof UINT32]
> -SetVar R_Ip6ConfigPolicy $IP6CP(Manual)
> -
> -SetVar R_Context 0
> -BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context,\
> - &@R_DoneEvent, &@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "BS.CreateEvent." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.RegisterDataNotify - Register notification event for configuration." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_Status"
> -GetAck
> -GetVar R_Status
> -if { $R_Status == $EFI_SUCCESS } {
> - set assert pass
> - RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.SetData - Call SetData to set manual policy." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -} elseif { $R_Status == $EFI_NOT_READY } {
> - set i 0
> - set L_TimeOut 30
> - while { 1 > 0 } {
> - GetVar R_Context
> - if { $R_Context == 1 } {
> - break
> - } elseif { $i == $L_TimeOut } {
> - set assert fail
> -
> - RecordAssertion $assert $GenericAssertionGuid \
> - "SetData failed.(event hasn't been signaled before TIMEOUT)." \
> - "TIMEOUT value is $L_TimeOut (sec), "
> - SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - EndScope _IP6CONFIG_GETDATA_CONF3
> - EndLog
> - return
> - }
> - incr i
> - Stall 1
> - }
> -} else {
> - set assert fail
> - RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.SetData - Call SetData to set manual policy." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> - SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - EndScope _IP6CONFIG_GETDATA_CONF3
> - EndLog
> - return
> -}
> -
> -Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.GetData - Call GetData to get policy value." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -GetVar R_Ip6ConfigPolicy
> -if { $R_Ip6ConfigPolicy == $IP6CP(Manual) } {
> - set assert pass
> -} else {
> - set assert fail
> -
> - RecordAssertion $assert $GenericAssertionGuid \
> - "Set manual policy failure (event is signaled correctly and data correct)."
> - SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - EndScope _IP6CONFIG_GETDATA_CONF3
> - EndLog
> - return
> -}
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Set manual policy succeeds(event is signaled correctly and data correct)."
> -
> -#
> -# Check Point : Set Manual Address with valid value
> -#
> -EFI_IP6_CONFIG_MANUAL_ADDRESS R_Temp_Ip6ConfigManualAddress
> -
> -set L_ManualListLen 1
> -EFI_IP6_CONFIG_MANUAL_ADDRESS R_Ip6ConfigManualAddress
> -set L_UnitLen [Sizeof EFI_IP6_CONFIG_MANUAL_ADDRESS]
> -set L_ListLen [expr {$L_UnitLen * $L_ManualListLen}]
> -SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
> -SetVar R_Ip6ConfigDataSize $L_ListLen
> -SetVar R_Temp_Ip6ConfigManualAddress.IsAnycast FALSE
> -SetVar R_Temp_Ip6ConfigManualAddress.PrefixLength 64
> -SetIpv6Address R_Temp_Ip6ConfigManualAddress.Address "2002::5001"
> -SetVar R_Ip6ConfigManualAddress @R_Temp_Ip6ConfigManualAddress
> -
> -SetVar R_Context1 0
> -BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context1,\
> - &@R_DoneEvent1, &@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "BS.CreateEvent." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.RegisterDataNotify - Register notification event for configuration." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigManualAddress,&@R_Status"
> -GetAck
> -GetVar R_Status
> -if { $R_Status == $EFI_SUCCESS } {
> - set assert pass
> - RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.SetData - Call SetData with valid value." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -} elseif { $R_Status == $EFI_NOT_READY } {
> - set i 0
> - set L_TimeOut 30
> - while { 1 > 0 } {
> - GetVar R_Context1
> - if { $R_Context1 == 1 } {
> - break
> - } elseif { $i == $L_TimeOut } {
> - set assert fail
> -
> - RecordAssertion $assert $GenericAssertionGuid \
> - "SetData failed.(event hasn't been signaled before TIMEOUT)." \
> - "TIMEOUT value is $L_TimeOut (sec), "
> - SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> - GetAck
> - SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - EndScope _IP6CONFIG_GETDATA_CONF3
> - EndLog
> - return
> - }
> - incr i
> - Stall 1
> - }
> -} else {
> - set assert fail
> - RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.SetData - Call SetData to set manual address." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> - SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> - GetAck
> - SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - EndScope _IP6CONFIG_GETDATA_CONF3
> - EndLog
> - return
> -}
> -
> -#
> -# Check Point : Get Manual Address with datasize too small
> -#
> -SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
> -SetVar R_Ip6ConfigDataSize 16
> -
> -Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigManualAddress,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_BUFFER_TOO_SMALL]
> -RecordAssertion $assert $Ip6ConfigGetDataConf3AssertionGuid001 \
> - "Ip6Config.GetData - Call GetData with the datasize too small." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_BUFFER_TOO_SMALL"
> -
> -GetVar R_Ip6ConfigDataSize
> -set L_ObtainedSize [ expr { $R_Ip6ConfigDataSize } ]
> -set L_DesiredSize [ Sizeof EFI_IP6_CONFIG_MANUAL_ADDRESS ]
> -if { [ expr { $L_ObtainedSize % $L_DesiredSize } ] == 0 } {
> - set assert pass
> -} else {
> - set assert fail
> -}
> -RecordAssertion $assert $Ip6ConfigGetDataConf3AssertionGuid002 \
> - "Ip6Config.GetData - Correctly Modify the DataSize." \
> - "ReturnSize - $L_ObtainedSize, ExpectedSize - $L_DesiredSize"
> -
> -#
> -# Clean up
> -#
> -
> -#
> -# Set automatic policy (this will clean up all address information configured)
> -#
> -SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> -SetVar R_Ip6ConfigDataSize [Sizeof UINT32]
> -SetVar R_Ip6ConfigPolicy $IP6CP(Automatic)
> -
> -SetVar R_Context 0
> -
> -Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_Status"
> -GetAck
> -GetVar R_Status
> -if { $R_Status == $EFI_SUCCESS } {
> - set assert pass
> -} elseif { $R_Status == $EFI_NOT_READY } {
> - set i 0
> - set L_TimeOut 30
> - set assert pass
> - while { 1 > 0 } {
> - GetVar R_Context
> - if { $R_Context == 1 } {
> - break
> - } elseif { $i == $L_TimeOut } {
> - set assert fail
> -
> - SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> - GetAck
> -
> - EndScope _IP6CONFIG_GETDATA_CONF3
> - EndLog
> - return
> - }
> - incr i
> - Stall 1
> - }
> -} else {
> - set assert fail
> -
> - SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> - GetAck
> -
> - EndScope _IP6CONFIG_GETDATA_CONF3
> - EndLog
> - return
> -}
> -
> -Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_Status"
> -GetAck
> -GetVar R_Ip6ConfigPolicy
> -if { $R_Ip6ConfigPolicy == $IP6CP(Automatic) } {
> - set assert pass
> -} else {
> - set assert fail
> -
> - RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.SetData - Set automatic policy to clean up the former configuration." \
> - "TimeUsed - $i, TimeOut Value- $L_TimeOut"
> - SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> - GetAck
> -
> - EndScope _IP6CONFIG_GETDATA_CONF3
> - EndLog
> - return
> -}
> -
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.SetData - Set automatic policy to clean up the former configuration." \
> - "TimeUsed - $i, TimeOut Value- $L_TimeOut"
> -
> -#
> -# Unregister Event for Manual Address and close event
> -#
> -SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
> -Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.UnregisterDataNotify - Unregister notification event for configuration." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> -GetAck
> -SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> -Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.UnregisterDataNotify - Unregister notification event for configuration." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -BS->CloseEvent {@R_DoneEvent,&@R_Status}
> -GetAck
> -
> -EndScope _IP6CONFIG_GETDATA_CONF3
> -
> +#
> +# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
> +# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
> +#
> +# This program and the accompanying materials
> +# are licensed and made available under the terms and conditions of the BSD License
> +# which accompanies this distribution. The full text of the license may be found at
> +# http://opensource.org/licenses/bsd-license.php
> +#
> +# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> +# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
> +#
> +################################################################################
> +CaseLevel CONFORMANCE
> +CaseAttribute AUTO
> +CaseVerboseLevel DEFAULT
> +set reportfile report.csv
> +
> +#
> +# test case Name, category, description, GUID...
> +#
> +CaseGuid 7B341FC4-1F10-4851-83AD-103A56B0EC35
> +CaseName GetData.Conf3.Case1
> +CaseCategory IP6Config
> +CaseDescription {GetData must not succeed when DataSize is too small for the data type.}
> +
> +################################################################################
> +Include IP6Config/Include/Ip6Config.inc.tcl
> +
> +
> +#
> +# Begin log ...
> +#
> +BeginLog
> +
> +#
> +# BeginScope
> +#
> +BeginScope _IP6CONFIG_GETDATA_CONF3
> +
> +#
> +# Parameter Definition
> +# R_ represents "Remote EFI Side Parameter"
> +# L_ represents "Local ENTS Side Parameter"
> +#
> +UINTN R_Status
> +UINTN R_Context
> +UINTN R_Context1
> +UINTN R_DoneEvent
> +UINTN R_DoneEvent1
> +UINTN R_Ip6ConfigDataSize
> +UINT32 R_Ip6ConfigDataType
> +EFI_IP6_CONFIG_INTERFACE_INFO R_Ip6ConfigInterfaceInfo
> +EFI_IP6_CONFIG_INTERFACE_ID R_Ip6ConfigInterfaceId
> +UINT32 R_Ip6ConfigPolicy
> +EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS R_Ip6ConfigDadTransmits
> +
> +#
> +# Check Point: Call Ip6Config->SetData to set manual policy
> +#
> +SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> +SetVar R_Ip6ConfigDataSize [Sizeof UINT32]
> +SetVar R_Ip6ConfigPolicy $IP6CP(Manual)
> +
> +SetVar R_Context 0
> +BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context,\
> + &@R_DoneEvent, &@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "BS.CreateEvent." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.RegisterDataNotify - Register notification event for configuration." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_Status"
> +GetAck
> +GetVar R_Status
> +if { $R_Status == $EFI_SUCCESS } {
> + set assert pass
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.SetData - Call SetData to set manual policy." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +} elseif { $R_Status == $EFI_NOT_READY } {
> + set i 0
> + set L_TimeOut 30
> + while { 1 > 0 } {
> + GetVar R_Context
> + if { $R_Context == 1 } {
> + break
> + } elseif { $i == $L_TimeOut } {
> + set assert fail
> +
> + RecordAssertion $assert $GenericAssertionGuid \
> + "SetData failed.(event hasn't been signaled before TIMEOUT)." \
> + "TIMEOUT value is $L_TimeOut (sec), "
> + SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_GETDATA_CONF3
> + EndLog
> + return
> + }
> + incr i
> + Stall 1
> + }
> +} else {
> + set assert fail
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.SetData - Call SetData to set manual policy." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> + SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_GETDATA_CONF3
> + EndLog
> + return
> +}
> +
> +Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.GetData - Call GetData to get policy value." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +GetVar R_Ip6ConfigPolicy
> +if { $R_Ip6ConfigPolicy == $IP6CP(Manual) } {
> + set assert pass
> +} else {
> + set assert fail
> +
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Set manual policy failure (event is signaled correctly and data correct)."
> + SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_GETDATA_CONF3
> + EndLog
> + return
> +}
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Set manual policy succeeds(event is signaled correctly and data correct)."
> +
> +#
> +# Check Point : Set Manual Address with valid value
> +#
> +EFI_IP6_CONFIG_MANUAL_ADDRESS R_Temp_Ip6ConfigManualAddress
> +
> +set L_ManualListLen 1
> +EFI_IP6_CONFIG_MANUAL_ADDRESS R_Ip6ConfigManualAddress
> +set L_UnitLen [Sizeof EFI_IP6_CONFIG_MANUAL_ADDRESS]
> +set L_ListLen [expr {$L_UnitLen * $L_ManualListLen}]
> +SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
> +SetVar R_Ip6ConfigDataSize $L_ListLen
> +SetVar R_Temp_Ip6ConfigManualAddress.IsAnycast FALSE
> +SetVar R_Temp_Ip6ConfigManualAddress.PrefixLength 64
> +SetIpv6Address R_Temp_Ip6ConfigManualAddress.Address "2002::5001"
> +SetVar R_Ip6ConfigManualAddress @R_Temp_Ip6ConfigManualAddress
> +
> +SetVar R_Context1 0
> +BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context1,\
> + &@R_DoneEvent1, &@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "BS.CreateEvent." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.RegisterDataNotify - Register notification event for configuration." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigManualAddress,&@R_Status"
> +GetAck
> +GetVar R_Status
> +if { $R_Status == $EFI_SUCCESS } {
> + set assert pass
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.SetData - Call SetData with valid value." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +} elseif { $R_Status == $EFI_NOT_READY } {
> + set i 0
> + set L_TimeOut 30
> + while { 1 > 0 } {
> + GetVar R_Context1
> + if { $R_Context1 == 1 } {
> + break
> + } elseif { $i == $L_TimeOut } {
> + set assert fail
> +
> + RecordAssertion $assert $GenericAssertionGuid \
> + "SetData failed.(event hasn't been signaled before TIMEOUT)." \
> + "TIMEOUT value is $L_TimeOut (sec), "
> + SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> + GetAck
> + SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_GETDATA_CONF3
> + EndLog
> + return
> + }
> + incr i
> + Stall 1
> + }
> +} else {
> + set assert fail
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.SetData - Call SetData to set manual address." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> + SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> + GetAck
> + SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_GETDATA_CONF3
> + EndLog
> + return
> +}
> +
> +#
> +# Check Point : Get Manual Address with datasize too small
> +#
> +SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
> +SetVar R_Ip6ConfigDataSize 16
> +
> +Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigManualAddress,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_BUFFER_TOO_SMALL]
> +RecordAssertion $assert $Ip6ConfigGetDataConf3AssertionGuid001 \
> + "Ip6Config.GetData - Call GetData with the datasize too small." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_BUFFER_TOO_SMALL"
> +
> +GetVar R_Ip6ConfigDataSize
> +set L_ObtainedSize [ expr { $R_Ip6ConfigDataSize } ]
> +set L_DesiredSize [ Sizeof EFI_IP6_CONFIG_MANUAL_ADDRESS ]
> +if { [ expr { $L_ObtainedSize % $L_DesiredSize } ] == 0 } {
> + set assert pass
> +} else {
> + set assert fail
> +}
> +RecordAssertion $assert $Ip6ConfigGetDataConf3AssertionGuid002 \
> + "Ip6Config.GetData - Correctly Modify the DataSize." \
> + "ReturnSize - $L_ObtainedSize, ExpectedSize - $L_DesiredSize"
> +
> +#
> +# Clean up
> +#
> +
> +#
> +# Set automatic policy (this will clean up all address information configured)
> +#
> +SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> +SetVar R_Ip6ConfigDataSize [Sizeof UINT32]
> +SetVar R_Ip6ConfigPolicy $IP6CP(Automatic)
> +
> +SetVar R_Context 0
> +
> +Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_Status"
> +GetAck
> +GetVar R_Status
> +if { $R_Status == $EFI_SUCCESS } {
> + set assert pass
> +} elseif { $R_Status == $EFI_NOT_READY } {
> + set i 0
> + set L_TimeOut 30
> + set assert pass
> + while { 1 > 0 } {
> + GetVar R_Context
> + if { $R_Context == 1 } {
> + break
> + } elseif { $i == $L_TimeOut } {
> + set assert fail
> +
> + SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> + GetAck
> +
> + EndScope _IP6CONFIG_GETDATA_CONF3
> + EndLog
> + return
> + }
> + incr i
> + Stall 1
> + }
> +} else {
> + set assert fail
> +
> + SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> + GetAck
> +
> + EndScope _IP6CONFIG_GETDATA_CONF3
> + EndLog
> + return
> +}
> +
> +Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_Status"
> +GetAck
> +GetVar R_Ip6ConfigPolicy
> +if { $R_Ip6ConfigPolicy == $IP6CP(Automatic) } {
> + set assert pass
> +} else {
> + set assert fail
> +
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.SetData - Set automatic policy to clean up the former configuration." \
> + "TimeUsed - $i, TimeOut Value- $L_TimeOut"
> + SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> + GetAck
> +
> + EndScope _IP6CONFIG_GETDATA_CONF3
> + EndLog
> + return
> +}
> +
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.SetData - Set automatic policy to clean up the former configuration." \
> + "TimeUsed - $i, TimeOut Value- $L_TimeOut"
> +
> +#
> +# Unregister Event for Manual Address and close event
> +#
> +SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
> +Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.UnregisterDataNotify - Unregister notification event for configuration." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> +GetAck
> +SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> +Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.UnregisterDataNotify - Unregister notification event for configuration." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +BS->CloseEvent {@R_DoneEvent,&@R_Status}
> +GetAck
> +
> +EndScope _IP6CONFIG_GETDATA_CONF3
> +
> EndLog
> \ No newline at end of file
> diff --git a/uefi-sct/EMS/Bin/TestCase/IP6Config/GetData.Conf4.Case1.tcl b/uefi-sct/EMS/Bin/TestCase/IP6Config/GetData.Conf4.Case1.tcl
> index e36cdfc..bd38be0 100644
> --- a/uefi-sct/EMS/Bin/TestCase/IP6Config/GetData.Conf4.Case1.tcl
> +++ b/uefi-sct/EMS/Bin/TestCase/IP6Config/GetData.Conf4.Case1.tcl
> @@ -1,73 +1,73 @@
> -#
> -# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
> -# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
> -#
> -# This program and the accompanying materials
> -# are licensed and made available under the terms and conditions of the BSD License
> -# which accompanies this distribution. The full text of the license may be found at
> -# http://opensource.org/licenses/bsd-license.php
> -#
> -# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> -# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
> -#
> -################################################################################
> -CaseLevel CONFORMANCE
> -CaseAttribute AUTO
> -CaseVerboseLevel DEFAULT
> -set reportfile report.csv
> -
> -#
> -# test case Name, category, description, GUID...
> -#
> -CaseGuid F340A957-9345-478d-BE53-5F7C561C1866
> -CaseName GetData.Conf4.Case1
> -CaseCategory IP6Config
> -CaseDescription {GetData must not succeed when data type is not found.}
> -
> -################################################################################
> -Include IP6Config/Include/Ip6Config.inc.tcl
> -
> -
> -#
> -# Begin log ...
> -#
> -BeginLog
> -
> -#
> -# BeginScope
> -#
> -BeginScope _IP6CONFIG_GETDATA_CONF4
> -
> -#
> -# Parameter Definition
> -# R_ represents "Remote EFI Side Parameter"
> -# L_ represents "Local ENTS Side Parameter"
> -#
> -UINTN R_Status
> -UINTN R_Context
> -UINTN R_DoneEvent
> -UINTN R_Ip6ConfigDataSize
> -UINT32 R_Ip6ConfigDataType
> -UINTN R_Ip6ConfigMaximumType
> -EFI_IP6_CONFIG_INTERFACE_INFO R_Ip6ConfigInterfaceInfo
> -EFI_IP6_CONFIG_INTERFACE_ID R_Ip6ConfigInterfaceId
> -UINT32 R_Ip6ConfigPolicy
> -EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS R_Ip6ConfigDadTransmits
> -EFI_IP6_CONFIG_MANUAL_ADDRESS R_Ip6ConfigManualAddress
> -
> -#
> -# Check Point: Call Ip6Config->GetData with the date type not existing.
> -#
> -SetVar R_Ip6ConfigDataType $IP6CDT(Maximum)
> -SetVar R_Ip6ConfigDataSize [Sizeof UINT32]
> -
> -Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigMaximumType,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_NOT_FOUND]
> -RecordAssertion $assert $Ip6ConfigGetDataConf4AssertionGuid001 \
> - "Ip6Config.GetData - Call GetData with Datatype not existing." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_NOT_FOUND"
> -
> -EndScope _IP6CONFIG_GETDATA_CONF4
> -
> +#
> +# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
> +# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
> +#
> +# This program and the accompanying materials
> +# are licensed and made available under the terms and conditions of the BSD License
> +# which accompanies this distribution. The full text of the license may be found at
> +# http://opensource.org/licenses/bsd-license.php
> +#
> +# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> +# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
> +#
> +################################################################################
> +CaseLevel CONFORMANCE
> +CaseAttribute AUTO
> +CaseVerboseLevel DEFAULT
> +set reportfile report.csv
> +
> +#
> +# test case Name, category, description, GUID...
> +#
> +CaseGuid F340A957-9345-478d-BE53-5F7C561C1866
> +CaseName GetData.Conf4.Case1
> +CaseCategory IP6Config
> +CaseDescription {GetData must not succeed when data type is not found.}
> +
> +################################################################################
> +Include IP6Config/Include/Ip6Config.inc.tcl
> +
> +
> +#
> +# Begin log ...
> +#
> +BeginLog
> +
> +#
> +# BeginScope
> +#
> +BeginScope _IP6CONFIG_GETDATA_CONF4
> +
> +#
> +# Parameter Definition
> +# R_ represents "Remote EFI Side Parameter"
> +# L_ represents "Local ENTS Side Parameter"
> +#
> +UINTN R_Status
> +UINTN R_Context
> +UINTN R_DoneEvent
> +UINTN R_Ip6ConfigDataSize
> +UINT32 R_Ip6ConfigDataType
> +UINTN R_Ip6ConfigMaximumType
> +EFI_IP6_CONFIG_INTERFACE_INFO R_Ip6ConfigInterfaceInfo
> +EFI_IP6_CONFIG_INTERFACE_ID R_Ip6ConfigInterfaceId
> +UINT32 R_Ip6ConfigPolicy
> +EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS R_Ip6ConfigDadTransmits
> +EFI_IP6_CONFIG_MANUAL_ADDRESS R_Ip6ConfigManualAddress
> +
> +#
> +# Check Point: Call Ip6Config->GetData with the date type not existing.
> +#
> +SetVar R_Ip6ConfigDataType $IP6CDT(Maximum)
> +SetVar R_Ip6ConfigDataSize [Sizeof UINT32]
> +
> +Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigMaximumType,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_NOT_FOUND]
> +RecordAssertion $assert $Ip6ConfigGetDataConf4AssertionGuid001 \
> + "Ip6Config.GetData - Call GetData with Datatype not existing." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_NOT_FOUND"
> +
> +EndScope _IP6CONFIG_GETDATA_CONF4
> +
> EndLog
> \ No newline at end of file
> diff --git a/uefi-sct/EMS/Bin/TestCase/IP6Config/GetData.Conf5.Case1.tcl b/uefi-sct/EMS/Bin/TestCase/IP6Config/GetData.Conf5.Case1.tcl
> index c39323f..c186520 100644
> --- a/uefi-sct/EMS/Bin/TestCase/IP6Config/GetData.Conf5.Case1.tcl
> +++ b/uefi-sct/EMS/Bin/TestCase/IP6Config/GetData.Conf5.Case1.tcl
> @@ -1,492 +1,492 @@
> -#
> -# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
> -# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
> -#
> -# This program and the accompanying materials
> -# are licensed and made available under the terms and conditions of the BSD License
> -# which accompanies this distribution. The full text of the license may be found at
> -# http://opensource.org/licenses/bsd-license.php
> -#
> -# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> -# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
> -#
> -################################################################################
> -CaseLevel CONFORMANCE
> -CaseAttribute AUTO
> -CaseVerboseLevel DEFAULT
> -set reportfile report.csv
> -
> -#
> -# test case Name, category, description, GUID...
> -#
> -CaseGuid 6638523D-470B-4c50-AE75-DE0CE6854DE8
> -CaseName GetData.Conf5.Case1
> -CaseCategory IP6Config
> -CaseDescription {GetData must not succeed when the last asynchronous process for the data type has not been finished yet.}
> -
> -################################################################################
> -Include IP6Config/Include/Ip6Config.inc.tcl
> -
> -
> -#
> -# Begin log ...
> -#
> -BeginLog
> -
> -#
> -# BeginScope
> -#
> -BeginScope _IP6CONFIG_GETDATA_CONF5
> -
> -#
> -# Parameter Definition
> -# R_ represents "Remote EFI Side Parameter"
> -# L_ represents "Local ENTS Side Parameter"
> -#
> -UINTN R_Status
> -UINTN R_Context
> -UINTN R_DoneEvent
> -UINTN R_Context1
> -UINTN R_DoneEvent1
> -UINTN R_Ip6ConfigDataSize
> -UINT32 R_Ip6ConfigDataType
> -EFI_IP6_CONFIG_INTERFACE_INFO R_Ip6ConfigInterfaceInfo
> -EFI_IP6_CONFIG_INTERFACE_ID R_Ip6ConfigInterfaceId
> -UINT32 R_Ip6ConfigPolicy
> -EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS R_Ip6ConfigDadTransmits
> -
> -#
> -# Check Point: Call Ip6Config->SetData to set manual policy
> -#
> -SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> -SetVar R_Ip6ConfigDataSize [Sizeof UINT32]
> -SetVar R_Ip6ConfigPolicy $IP6CP(Manual)
> -
> -SetVar R_Context 0
> -BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context,\
> - &@R_DoneEvent, &@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "BS.CreateEvent." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.RegisterDataNotify - Register notification event for configuration." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_Status"
> -GetAck
> -GetVar R_Status
> -if { $R_Status == $EFI_SUCCESS } {
> - set assert pass
> - RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.SetData - Call SetData to set manual policy." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -} elseif { $R_Status == $EFI_NOT_READY } {
> - set i 0
> - set L_TimeOut 30
> - while { 1 > 0 } {
> - GetVar R_Context
> - if { $R_Context == 1 } {
> - break
> - } elseif { $i == $L_TimeOut } {
> - set assert fail
> - RecordAssertion $assert $GenericAssertionGuid \
> - "SetData failed.(event hasn't been signaled before TIMEOUT)." \
> - "TIMEOUT value is $L_TimeOut (sec), "
> - SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - EndScope _IP6CONFIG_GETDATA_CONF5
> - EndLog
> - return
> - }
> - incr i
> - Stall 1
> - }
> -} else {
> - set assert fail
> - RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.SetData - Call SetData to set manual policy." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> - SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - EndScope _IP6CONFIG_GETDATA_CONF5
> - EndLog
> - return
> -}
> -
> -Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.GetData - Call GetData to get policy value." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -GetVar R_Ip6ConfigPolicy
> -if { $R_Ip6ConfigPolicy == $IP6CP(Manual) } {
> - set assert pass
> -} else {
> - set assert fail
> -
> - RecordAssertion $assert $GenericAssertionGuid \
> - "Set manual policy succeeds(event is signaled correctly and data correct)."
> - SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - EndScope _IP6CONFIG_GETDATA_CONF5
> - EndLog
> - return
> -}
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Set manual policy succeeds(event is signaled correctly and data correct)."
> -#
> -# Check Point: Call Ip6Config->SetData to set DadXmits 20
> -#
> -SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> -SetVar R_Ip6ConfigDataSize [Sizeof EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS]
> -SetVar R_Ip6ConfigDadTransmits.DupAddrDetectTransmits 20
> -
> -SetVar R_Context1 0
> -BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context1,\
> - &@R_DoneEvent1, &@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "BS.CreateEvent." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.RegisterDataNotify - Register notification event for configuration." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigDadTransmits,&@R_Status"
> -GetAck
> -GetVar R_Status
> -if { $R_Status == $EFI_SUCCESS } {
> - set assert pass
> - RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.SetData - Call SetData to set DadXmits 10." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -} elseif { $R_Status == $EFI_NOT_READY } {
> - set i 0
> - set L_TimeOut 30
> - while { 1 > 0 } {
> - GetVar R_Context1
> - if { $R_Context1 == 1 } {
> - break
> - } elseif { $i == $L_TimeOut } {
> - set assert fail
> - RecordAssertion $assert $GenericAssertionGuid \
> - "SetData failed.(event hasn't been signaled before TIMEOUT)." \
> - "TIMEOUT value is $L_TimeOut (sec), "
> -
> - SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> - GetAck
> - EndScope _IP6CONFIG_GETDATA_CONF5
> - EndLog
> - return
> - }
> - incr i
> - Stall 1
> - }
> -} else {
> - set assert fail
> - RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.SetData - Call SetData to set DadXmits 10." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> - SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> - GetAck
> - EndScope _IP6CONFIG_GETDATA_CONF5
> - EndLog
> - return
> -}
> -
> -Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigDadTransmits,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.GetData - Call GetData to get DadXmits value." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -GetVar R_Ip6ConfigDadTransmits.DupAddrDetectTransmits
> -if { ${R_Ip6ConfigDadTransmits.DupAddrDetectTransmits} == 20 } {
> - set assert pass
> -} else {
> - set assert fail
> -
> - RecordAssertion $assert $GenericAssertionGuid \
> - "Set DadXmits succeeds(event is signaled correctly and data correct)."
> - SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> - GetAck
> - EndScope _IP6CONFIG_GETDATA_CONF5
> - EndLog
> - return
> -}
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Set DadXmits succeeds(event is signaled correctly and data correct)."
> -
> -#
> -# Check Point : Set Manual Address with valid parameter
> -#
> -EFI_IP6_CONFIG_MANUAL_ADDRESS R_Temp_Ip6ConfigManualAddress
> -
> -set L_ManualListLen 1
> -EFI_IP6_CONFIG_MANUAL_ADDRESS R_Ip6ConfigManualAddress
> -set L_UnitLen [Sizeof EFI_IP6_CONFIG_MANUAL_ADDRESS]
> -set L_ListLen [expr {$L_UnitLen * $L_ManualListLen}]
> -SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
> -SetVar R_Ip6ConfigDataSize $L_ListLen
> -SetVar R_Temp_Ip6ConfigManualAddress.IsAnycast FALSE
> -SetVar R_Temp_Ip6ConfigManualAddress.PrefixLength 64
> -SetIpv6Address R_Temp_Ip6ConfigManualAddress.Address "2002::5000"
> -SetVar R_Ip6ConfigManualAddress @R_Temp_Ip6ConfigManualAddress
> -
> -Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigManualAddress,&@R_Status"
> -GetAck
> -GetVar R_Status
> -if { $R_Status == $EFI_NOT_READY } {
> - set assert pass
> -} else {
> - set assert fail
> -
> - RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.SetData - Call SetData to set manual address with valid parameter." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_NOT_READY"
> - SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> - GetAck
> - EndScope _IP6CONFIG_GETDATA_CONF5
> - EndLog
> - return
> -}
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.SetData - Call SetData to set manual address with valid parameter." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_NOT_READY"
> -
> -#
> -# Check Point : Get Manual Address with valid parameter before the former setting finishes
> -#
> -set L_ManualListLen 1
> -set L_UnitLen [Sizeof EFI_IP6_CONFIG_MANUAL_ADDRESS]
> -set L_ListLen [expr {$L_UnitLen * $L_ManualListLen}]
> -SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
> -SetVar R_Ip6ConfigDataSize $L_ListLen
> -
> -Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigManualAddress,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_NOT_READY]
> -RecordAssertion $assert $Ip6ConfigGetDataConf5AssertionGuid001 \
> - "Ip6Config.SetData - Call GetData to get manual address before the former setting finishes." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_NOT_READY"
> -
> -#
> -# Make sure the former configurations succeeds
> -# (Eliminate the side-effect to other cases)
> -#
> -set i 0
> -set L_TimeOut 30
> -Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigManualAddress,&@R_Status"
> -GetAck
> -GetVar R_Status
> -set assert pass
> -while { $R_Status == $EFI_NOT_READY } {
> - Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigManualAddress,&@R_Status"
> - GetAck
> - GetVar R_Status
> - if { $R_Status == $EFI_SUCCESS } {
> - break
> - } elseif { $i == $L_TimeOut } {
> - set assert fail
> -
> - RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.SetData - former SetData finishes." \
> - "TimeUsed - $i, TimeOut Value- $L_TimeOut"
> - SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> - GetAck
> - EndScope _IP6CONFIG_GETDATA_CONF5
> - EndLog
> - return
> - }
> - incr i
> - Stall 1
> -}
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.SetData - former SetData finishes." \
> - "TimeUsed - $i, TimeOut Value- $L_TimeOut"
> -
> -
> -#
> -# Set automatic policy (this will clean up all address information configured)
> -#
> -SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> -SetVar R_Ip6ConfigDataSize [Sizeof UINT32]
> -SetVar R_Ip6ConfigPolicy $IP6CP(Automatic)
> -
> -SetVar R_Context 0
> -
> -Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_Status"
> -GetAck
> -GetVar R_Status
> -if { $R_Status == $EFI_SUCCESS } {
> - set assert pass
> -} elseif { $R_Status == $EFI_NOT_READY } {
> - set i 0
> - set L_TimeOut 30
> - set assert pass
> - while { 1 > 0 } {
> - GetVar R_Context
> - if { $R_Context == 1 } {
> - break
> - } elseif { $i == $L_TimeOut } {
> - set assert fail
> -
> - SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> - GetAck
> -
> - EndScope _IP6CONFIG_GETDATA_CONF5
> - EndLog
> - return
> - }
> - incr i
> - Stall 1
> - }
> -} else {
> - set assert fail
> -
> - SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> - GetAck
> -
> - EndScope _IP6CONFIG_GETDATA_CONF5
> - EndLog
> - return
> -}
> -
> -Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_Status"
> -GetAck
> -GetVar R_Ip6ConfigPolicy
> -if { $R_Ip6ConfigPolicy == $IP6CP(Automatic) } {
> - set assert pass
> -} else {
> - set assert fail
> -
> - RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.SetData - Set automatic policy to clean up the former configuration." \
> - "TimeUsed - $i, TimeOut Value- $L_TimeOut"
> -
> - SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> - GetAck
> -
> - EndScope _IP6CONFIG_GETDATA_CONF5
> - EndLog
> - return
> -}
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.SetData - Set automatic policy to clean up the former configuration." \
> - "TimeUsed - $i, TimeOut Value- $L_TimeOut"
> -
> -#
> -# Clean up
> -#
> -SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> -Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.UnregisterDataNotify - Unregister notification event for configuration." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -BS->CloseEvent {@R_DoneEvent,&@R_Status}
> -GetAck
> -
> -SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> -Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.UnregisterDataNotify - Unregister notification event for configuration." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> -GetAck
> -
> -EndScope _IP6CONFIG_GETDATA_CONF5
> -
> +#
> +# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
> +# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
> +#
> +# This program and the accompanying materials
> +# are licensed and made available under the terms and conditions of the BSD License
> +# which accompanies this distribution. The full text of the license may be found at
> +# http://opensource.org/licenses/bsd-license.php
> +#
> +# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> +# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
> +#
> +################################################################################
> +CaseLevel CONFORMANCE
> +CaseAttribute AUTO
> +CaseVerboseLevel DEFAULT
> +set reportfile report.csv
> +
> +#
> +# test case Name, category, description, GUID...
> +#
> +CaseGuid 6638523D-470B-4c50-AE75-DE0CE6854DE8
> +CaseName GetData.Conf5.Case1
> +CaseCategory IP6Config
> +CaseDescription {GetData must not succeed when the last asynchronous process for the data type has not been finished yet.}
> +
> +################################################################################
> +Include IP6Config/Include/Ip6Config.inc.tcl
> +
> +
> +#
> +# Begin log ...
> +#
> +BeginLog
> +
> +#
> +# BeginScope
> +#
> +BeginScope _IP6CONFIG_GETDATA_CONF5
> +
> +#
> +# Parameter Definition
> +# R_ represents "Remote EFI Side Parameter"
> +# L_ represents "Local ENTS Side Parameter"
> +#
> +UINTN R_Status
> +UINTN R_Context
> +UINTN R_DoneEvent
> +UINTN R_Context1
> +UINTN R_DoneEvent1
> +UINTN R_Ip6ConfigDataSize
> +UINT32 R_Ip6ConfigDataType
> +EFI_IP6_CONFIG_INTERFACE_INFO R_Ip6ConfigInterfaceInfo
> +EFI_IP6_CONFIG_INTERFACE_ID R_Ip6ConfigInterfaceId
> +UINT32 R_Ip6ConfigPolicy
> +EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS R_Ip6ConfigDadTransmits
> +
> +#
> +# Check Point: Call Ip6Config->SetData to set manual policy
> +#
> +SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> +SetVar R_Ip6ConfigDataSize [Sizeof UINT32]
> +SetVar R_Ip6ConfigPolicy $IP6CP(Manual)
> +
> +SetVar R_Context 0
> +BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context,\
> + &@R_DoneEvent, &@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "BS.CreateEvent." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.RegisterDataNotify - Register notification event for configuration." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_Status"
> +GetAck
> +GetVar R_Status
> +if { $R_Status == $EFI_SUCCESS } {
> + set assert pass
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.SetData - Call SetData to set manual policy." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +} elseif { $R_Status == $EFI_NOT_READY } {
> + set i 0
> + set L_TimeOut 30
> + while { 1 > 0 } {
> + GetVar R_Context
> + if { $R_Context == 1 } {
> + break
> + } elseif { $i == $L_TimeOut } {
> + set assert fail
> + RecordAssertion $assert $GenericAssertionGuid \
> + "SetData failed.(event hasn't been signaled before TIMEOUT)." \
> + "TIMEOUT value is $L_TimeOut (sec), "
> + SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_GETDATA_CONF5
> + EndLog
> + return
> + }
> + incr i
> + Stall 1
> + }
> +} else {
> + set assert fail
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.SetData - Call SetData to set manual policy." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> + SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_GETDATA_CONF5
> + EndLog
> + return
> +}
> +
> +Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.GetData - Call GetData to get policy value." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +GetVar R_Ip6ConfigPolicy
> +if { $R_Ip6ConfigPolicy == $IP6CP(Manual) } {
> + set assert pass
> +} else {
> + set assert fail
> +
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Set manual policy succeeds(event is signaled correctly and data correct)."
> + SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_GETDATA_CONF5
> + EndLog
> + return
> +}
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Set manual policy succeeds(event is signaled correctly and data correct)."
> +#
> +# Check Point: Call Ip6Config->SetData to set DadXmits 20
> +#
> +SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> +SetVar R_Ip6ConfigDataSize [Sizeof EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS]
> +SetVar R_Ip6ConfigDadTransmits.DupAddrDetectTransmits 20
> +
> +SetVar R_Context1 0
> +BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context1,\
> + &@R_DoneEvent1, &@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "BS.CreateEvent." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.RegisterDataNotify - Register notification event for configuration." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigDadTransmits,&@R_Status"
> +GetAck
> +GetVar R_Status
> +if { $R_Status == $EFI_SUCCESS } {
> + set assert pass
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.SetData - Call SetData to set DadXmits 10." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +} elseif { $R_Status == $EFI_NOT_READY } {
> + set i 0
> + set L_TimeOut 30
> + while { 1 > 0 } {
> + GetVar R_Context1
> + if { $R_Context1 == 1 } {
> + break
> + } elseif { $i == $L_TimeOut } {
> + set assert fail
> + RecordAssertion $assert $GenericAssertionGuid \
> + "SetData failed.(event hasn't been signaled before TIMEOUT)." \
> + "TIMEOUT value is $L_TimeOut (sec), "
> +
> + SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_GETDATA_CONF5
> + EndLog
> + return
> + }
> + incr i
> + Stall 1
> + }
> +} else {
> + set assert fail
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.SetData - Call SetData to set DadXmits 10." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> + SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_GETDATA_CONF5
> + EndLog
> + return
> +}
> +
> +Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigDadTransmits,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.GetData - Call GetData to get DadXmits value." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +GetVar R_Ip6ConfigDadTransmits.DupAddrDetectTransmits
> +if { ${R_Ip6ConfigDadTransmits.DupAddrDetectTransmits} == 20 } {
> + set assert pass
> +} else {
> + set assert fail
> +
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Set DadXmits succeeds(event is signaled correctly and data correct)."
> + SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_GETDATA_CONF5
> + EndLog
> + return
> +}
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Set DadXmits succeeds(event is signaled correctly and data correct)."
> +
> +#
> +# Check Point : Set Manual Address with valid parameter
> +#
> +EFI_IP6_CONFIG_MANUAL_ADDRESS R_Temp_Ip6ConfigManualAddress
> +
> +set L_ManualListLen 1
> +EFI_IP6_CONFIG_MANUAL_ADDRESS R_Ip6ConfigManualAddress
> +set L_UnitLen [Sizeof EFI_IP6_CONFIG_MANUAL_ADDRESS]
> +set L_ListLen [expr {$L_UnitLen * $L_ManualListLen}]
> +SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
> +SetVar R_Ip6ConfigDataSize $L_ListLen
> +SetVar R_Temp_Ip6ConfigManualAddress.IsAnycast FALSE
> +SetVar R_Temp_Ip6ConfigManualAddress.PrefixLength 64
> +SetIpv6Address R_Temp_Ip6ConfigManualAddress.Address "2002::5000"
> +SetVar R_Ip6ConfigManualAddress @R_Temp_Ip6ConfigManualAddress
> +
> +Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigManualAddress,&@R_Status"
> +GetAck
> +GetVar R_Status
> +if { $R_Status == $EFI_NOT_READY } {
> + set assert pass
> +} else {
> + set assert fail
> +
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.SetData - Call SetData to set manual address with valid parameter." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_NOT_READY"
> + SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_GETDATA_CONF5
> + EndLog
> + return
> +}
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.SetData - Call SetData to set manual address with valid parameter." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_NOT_READY"
> +
> +#
> +# Check Point : Get Manual Address with valid parameter before the former setting finishes
> +#
> +set L_ManualListLen 1
> +set L_UnitLen [Sizeof EFI_IP6_CONFIG_MANUAL_ADDRESS]
> +set L_ListLen [expr {$L_UnitLen * $L_ManualListLen}]
> +SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
> +SetVar R_Ip6ConfigDataSize $L_ListLen
> +
> +Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigManualAddress,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_NOT_READY]
> +RecordAssertion $assert $Ip6ConfigGetDataConf5AssertionGuid001 \
> + "Ip6Config.SetData - Call GetData to get manual address before the former setting finishes." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_NOT_READY"
> +
> +#
> +# Make sure the former configurations succeeds
> +# (Eliminate the side-effect to other cases)
> +#
> +set i 0
> +set L_TimeOut 30
> +Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigManualAddress,&@R_Status"
> +GetAck
> +GetVar R_Status
> +set assert pass
> +while { $R_Status == $EFI_NOT_READY } {
> + Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigManualAddress,&@R_Status"
> + GetAck
> + GetVar R_Status
> + if { $R_Status == $EFI_SUCCESS } {
> + break
> + } elseif { $i == $L_TimeOut } {
> + set assert fail
> +
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.SetData - former SetData finishes." \
> + "TimeUsed - $i, TimeOut Value- $L_TimeOut"
> + SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_GETDATA_CONF5
> + EndLog
> + return
> + }
> + incr i
> + Stall 1
> +}
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.SetData - former SetData finishes." \
> + "TimeUsed - $i, TimeOut Value- $L_TimeOut"
> +
> +
> +#
> +# Set automatic policy (this will clean up all address information configured)
> +#
> +SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> +SetVar R_Ip6ConfigDataSize [Sizeof UINT32]
> +SetVar R_Ip6ConfigPolicy $IP6CP(Automatic)
> +
> +SetVar R_Context 0
> +
> +Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_Status"
> +GetAck
> +GetVar R_Status
> +if { $R_Status == $EFI_SUCCESS } {
> + set assert pass
> +} elseif { $R_Status == $EFI_NOT_READY } {
> + set i 0
> + set L_TimeOut 30
> + set assert pass
> + while { 1 > 0 } {
> + GetVar R_Context
> + if { $R_Context == 1 } {
> + break
> + } elseif { $i == $L_TimeOut } {
> + set assert fail
> +
> + SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> + GetAck
> +
> + EndScope _IP6CONFIG_GETDATA_CONF5
> + EndLog
> + return
> + }
> + incr i
> + Stall 1
> + }
> +} else {
> + set assert fail
> +
> + SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> + GetAck
> +
> + EndScope _IP6CONFIG_GETDATA_CONF5
> + EndLog
> + return
> +}
> +
> +Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_Status"
> +GetAck
> +GetVar R_Ip6ConfigPolicy
> +if { $R_Ip6ConfigPolicy == $IP6CP(Automatic) } {
> + set assert pass
> +} else {
> + set assert fail
> +
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.SetData - Set automatic policy to clean up the former configuration." \
> + "TimeUsed - $i, TimeOut Value- $L_TimeOut"
> +
> + SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> + GetAck
> +
> + EndScope _IP6CONFIG_GETDATA_CONF5
> + EndLog
> + return
> +}
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.SetData - Set automatic policy to clean up the former configuration." \
> + "TimeUsed - $i, TimeOut Value- $L_TimeOut"
> +
> +#
> +# Clean up
> +#
> +SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> +Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.UnregisterDataNotify - Unregister notification event for configuration." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +BS->CloseEvent {@R_DoneEvent,&@R_Status}
> +GetAck
> +
> +SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> +Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.UnregisterDataNotify - Unregister notification event for configuration." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> +GetAck
> +
> +EndScope _IP6CONFIG_GETDATA_CONF5
> +
> EndLog
> \ No newline at end of file
> diff --git a/uefi-sct/EMS/Bin/TestCase/IP6Config/GetData.Func1.Case1.tcl b/uefi-sct/EMS/Bin/TestCase/IP6Config/GetData.Func1.Case1.tcl
> index 6c4a72b..a0acc20 100644
> --- a/uefi-sct/EMS/Bin/TestCase/IP6Config/GetData.Func1.Case1.tcl
> +++ b/uefi-sct/EMS/Bin/TestCase/IP6Config/GetData.Func1.Case1.tcl
> @@ -1,272 +1,272 @@
> -#
> -# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
> -# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
> -#
> -# This program and the accompanying materials
> -# are licensed and made available under the terms and conditions of the BSD License
> -# which accompanies this distribution. The full text of the license may be found at
> -# http://opensource.org/licenses/bsd-license.php
> -#
> -# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> -# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
> -#
> -################################################################################
> -CaseLevel FUNCTION
> -CaseAttribute AUTO
> -CaseVerboseLevel DEFAULT
> -set reportfile report.csv
> -
> -#
> -# test case Name, category, description, GUID...
> -#
> -CaseGuid E4CD5B45-9CF5-4938-A243-7764F1E8CDE9
> -CaseName GetData.Func1.Case1
> -CaseCategory IP6Config
> -CaseDescription {GetData must succeed with valid parameters.}
> -
> -################################################################################
> -Include IP6Config/Include/Ip6Config.inc.tcl
> -
> -
> -#
> -# Begin log ...
> -#
> -BeginLog
> -
> -#
> -# BeginScope
> -#
> -BeginScope _IP6CONFIG_GETDATA_FUNC1
> -
> -#
> -# Parameter Definition
> -# R_ represents "Remote EFI Side Parameter"
> -# L_ represents "Local ENTS Side Parameter"
> -#
> -UINTN R_Status
> -UINTN R_Context
> -UINTN R_Context1
> -UINTN R_DoneEvent
> -UINTN R_DoneEvent1
> -UINTN R_Ip6ConfigDataSize
> -UINT32 R_Ip6ConfigDataType
> -EFI_IP6_CONFIG_INTERFACE_INFO R_Ip6ConfigInterfaceInfo
> -EFI_IP6_CONFIG_INTERFACE_ID R_Ip6ConfigInterfaceId
> -UINT32 R_Ip6ConfigPolicy
> -EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS R_Ip6ConfigDadTransmits
> -
> -#
> -# Check Point: Call Ip6Config->GetData to set AltInterfaceId
> -#
> -SetVar R_Ip6ConfigDataType $IP6CDT(AltInterfaceId)
> -SetVar R_Ip6ConfigDataSize [Sizeof EFI_IP6_CONFIG_INTERFACE_ID]
> -SetVar R_Ip6ConfigInterfaceId.Id(0) 0
> -SetVar R_Ip6ConfigInterfaceId.Id(1) 1
> -SetVar R_Ip6ConfigInterfaceId.Id(2) 2
> -SetVar R_Ip6ConfigInterfaceId.Id(3) 3
> -SetVar R_Ip6ConfigInterfaceId.Id(4) 4
> -SetVar R_Ip6ConfigInterfaceId.Id(5) 5
> -SetVar R_Ip6ConfigInterfaceId.Id(6) 6
> -SetVar R_Ip6ConfigInterfaceId.Id(7) 7
> -
> -SetVar R_Context 0
> -BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context,\
> - &@R_DoneEvent, &@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "BS.CreateEvent." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.RegisterDataNotify - Register notification event for configuration." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigInterfaceId,&@R_Status"
> -GetAck
> -GetVar R_Status
> -if { $R_Status == $EFI_SUCCESS } {
> - set assert pass
> - RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.GetData - Call GetData to set AltInterfaceId." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -} elseif { $R_Status == $EFI_NOT_READY } {
> - set i 0
> - set L_TimeOut 30
> - while { 1 > 0 } {
> - GetVar R_Context
> - if { $R_Context == 1 } {
> - break
> - } elseif { $i == $L_TimeOut } {
> - set assert fail
> - RecordAssertion $assert $GenericAssertionGuid \
> - "GetData failed.(event hasn't been signaled before TIMEOUT)." \
> - "TIMEOUT value is $L_TimeOut (sec), "
> - SetVar R_Ip6ConfigDataType $IP6CDT(AltInterfaceId)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - EndScope _IP6CONFIG_GETDATA_FUNC1
> - EndLog
> - return
> - }
> - incr i
> - Stall 1
> - }
> -} else {
> - set assert fail
> - RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.GetData - Call GetData to set AltInterfaceId." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> - SetVar R_Ip6ConfigDataType $IP6CDT(AltInterfaceId)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - EndScope _IP6CONFIG_GETDATA_FUNC1
> - EndLog
> - return
> -}
> -
> -Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigInterfaceId,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $Ip6ConfigGetDataFunc1AssertionGuid001 \
> - "Ip6Config.GetData - Call GetData to get AltInterfaceId value." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -GetVar R_Ip6ConfigInterfaceId
> -if { ${R_Ip6ConfigInterfaceId.Id(0)} == 0 && ${R_Ip6ConfigInterfaceId.Id(1)} == 1 && ${R_Ip6ConfigInterfaceId.Id(2)} == 2 && ${R_Ip6ConfigInterfaceId.Id(3)} == 3 && ${R_Ip6ConfigInterfaceId.Id(4)} == 4 && ${R_Ip6ConfigInterfaceId.Id(5)} == 5 && ${R_Ip6ConfigInterfaceId.Id(6)} == 6 && ${R_Ip6ConfigInterfaceId.Id(7)} == 7} {
> - set assert pass
> -} else {
> - set assert fail
> -}
> -RecordAssertion $assert $Ip6ConfigGetDataFunc1AssertionGuid002 \
> - "Set AltInterfaceId succeeds(event is signaled correctly and data correct)."
> -
> -#
> -# Check Point: Call Ip6Config->SetData to set DadXmits
> -#
> -SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> -SetVar R_Ip6ConfigDataSize [Sizeof EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS]
> -SetVar R_Ip6ConfigDadTransmits.DupAddrDetectTransmits 3
> -
> -SetVar R_Context1 0
> -BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context1,\
> - &@R_DoneEvent1, &@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "BS.CreateEvent." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.RegisterDataNotify - Register notification event for configuration." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigDadTransmits,&@R_Status"
> -GetAck
> -GetVar R_Status
> -if { $R_Status == $EFI_SUCCESS } {
> - set assert pass
> - RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.GetData - Call GetData to set DadXmits." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -} elseif { $R_Status == $EFI_NOT_READY } {
> - set i 0
> - set L_TimeOut 30
> - while { 1 > 0 } {
> - GetVar R_Context1
> - if { $R_Context1 == 1 } {
> - break
> - } elseif { $i == $L_TimeOut } {
> - set assert fail
> - RecordAssertion $assert $GenericAssertionGuid \
> - "GetData failed.(event hasn't been signaled before TIMEOUT)." \
> - "TIMEOUT value is $L_TimeOut (sec), "
> - SetVar R_Ip6ConfigDataType $IP6CDT(AltInterfaceId)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> - GetAck
> - EndScope _IP6CONFIG_GETDATA_FUNC1
> - EndLog
> - return
> - }
> - incr i
> - Stall 1
> - }
> -} else {
> - set assert fail
> - RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.GetData - Call GetData to set manual DadXmits." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> - SetVar R_Ip6ConfigDataType $IP6CDT(AltInterfaceId)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> - GetAck
> - EndScope _IP6CONFIG_GETDATA_FUNC1
> - EndLog
> - return
> -}
> -
> -Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigDadTransmits,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $Ip6ConfigGetDataFunc1AssertionGuid003 \
> - "Ip6Config.GetData - Call GetData to get DadXmits value." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -GetVar R_Ip6ConfigDadTransmits
> -if { ${R_Ip6ConfigDadTransmits.DupAddrDetectTransmits} == 3 } {
> - set assert pass
> -} else {
> - set assert fail
> -}
> -RecordAssertion $assert $Ip6ConfigGetDataFunc1AssertionGuid004 \
> - "Set DadXmits succeeds(event is signaled correctly and data correct)."
> -
> -#
> -# Clean up
> -#
> -SetVar R_Ip6ConfigDataType $IP6CDT(AltInterfaceId)
> -Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.UnregisterDataNotify - Unregister notification event for configuration." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -BS->CloseEvent {@R_DoneEvent,&@R_Status}
> -GetAck
> -
> -SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> -Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.UnregisterDataNotify - Unregister notification event for configuration." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> -GetAck
> -
> -EndScope _IP6CONFIG_GETDATA_FUNC1
> -
> +#
> +# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
> +# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
> +#
> +# This program and the accompanying materials
> +# are licensed and made available under the terms and conditions of the BSD License
> +# which accompanies this distribution. The full text of the license may be found at
> +# http://opensource.org/licenses/bsd-license.php
> +#
> +# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> +# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
> +#
> +################################################################################
> +CaseLevel FUNCTION
> +CaseAttribute AUTO
> +CaseVerboseLevel DEFAULT
> +set reportfile report.csv
> +
> +#
> +# test case Name, category, description, GUID...
> +#
> +CaseGuid E4CD5B45-9CF5-4938-A243-7764F1E8CDE9
> +CaseName GetData.Func1.Case1
> +CaseCategory IP6Config
> +CaseDescription {GetData must succeed with valid parameters.}
> +
> +################################################################################
> +Include IP6Config/Include/Ip6Config.inc.tcl
> +
> +
> +#
> +# Begin log ...
> +#
> +BeginLog
> +
> +#
> +# BeginScope
> +#
> +BeginScope _IP6CONFIG_GETDATA_FUNC1
> +
> +#
> +# Parameter Definition
> +# R_ represents "Remote EFI Side Parameter"
> +# L_ represents "Local ENTS Side Parameter"
> +#
> +UINTN R_Status
> +UINTN R_Context
> +UINTN R_Context1
> +UINTN R_DoneEvent
> +UINTN R_DoneEvent1
> +UINTN R_Ip6ConfigDataSize
> +UINT32 R_Ip6ConfigDataType
> +EFI_IP6_CONFIG_INTERFACE_INFO R_Ip6ConfigInterfaceInfo
> +EFI_IP6_CONFIG_INTERFACE_ID R_Ip6ConfigInterfaceId
> +UINT32 R_Ip6ConfigPolicy
> +EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS R_Ip6ConfigDadTransmits
> +
> +#
> +# Check Point: Call Ip6Config->GetData to set AltInterfaceId
> +#
> +SetVar R_Ip6ConfigDataType $IP6CDT(AltInterfaceId)
> +SetVar R_Ip6ConfigDataSize [Sizeof EFI_IP6_CONFIG_INTERFACE_ID]
> +SetVar R_Ip6ConfigInterfaceId.Id(0) 0
> +SetVar R_Ip6ConfigInterfaceId.Id(1) 1
> +SetVar R_Ip6ConfigInterfaceId.Id(2) 2
> +SetVar R_Ip6ConfigInterfaceId.Id(3) 3
> +SetVar R_Ip6ConfigInterfaceId.Id(4) 4
> +SetVar R_Ip6ConfigInterfaceId.Id(5) 5
> +SetVar R_Ip6ConfigInterfaceId.Id(6) 6
> +SetVar R_Ip6ConfigInterfaceId.Id(7) 7
> +
> +SetVar R_Context 0
> +BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context,\
> + &@R_DoneEvent, &@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "BS.CreateEvent." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.RegisterDataNotify - Register notification event for configuration." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigInterfaceId,&@R_Status"
> +GetAck
> +GetVar R_Status
> +if { $R_Status == $EFI_SUCCESS } {
> + set assert pass
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.GetData - Call GetData to set AltInterfaceId." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +} elseif { $R_Status == $EFI_NOT_READY } {
> + set i 0
> + set L_TimeOut 30
> + while { 1 > 0 } {
> + GetVar R_Context
> + if { $R_Context == 1 } {
> + break
> + } elseif { $i == $L_TimeOut } {
> + set assert fail
> + RecordAssertion $assert $GenericAssertionGuid \
> + "GetData failed.(event hasn't been signaled before TIMEOUT)." \
> + "TIMEOUT value is $L_TimeOut (sec), "
> + SetVar R_Ip6ConfigDataType $IP6CDT(AltInterfaceId)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_GETDATA_FUNC1
> + EndLog
> + return
> + }
> + incr i
> + Stall 1
> + }
> +} else {
> + set assert fail
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.GetData - Call GetData to set AltInterfaceId." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> + SetVar R_Ip6ConfigDataType $IP6CDT(AltInterfaceId)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_GETDATA_FUNC1
> + EndLog
> + return
> +}
> +
> +Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigInterfaceId,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $Ip6ConfigGetDataFunc1AssertionGuid001 \
> + "Ip6Config.GetData - Call GetData to get AltInterfaceId value." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +GetVar R_Ip6ConfigInterfaceId
> +if { ${R_Ip6ConfigInterfaceId.Id(0)} == 0 && ${R_Ip6ConfigInterfaceId.Id(1)} == 1 && ${R_Ip6ConfigInterfaceId.Id(2)} == 2 && ${R_Ip6ConfigInterfaceId.Id(3)} == 3 && ${R_Ip6ConfigInterfaceId.Id(4)} == 4 && ${R_Ip6ConfigInterfaceId.Id(5)} == 5 && ${R_Ip6ConfigInterfaceId.Id(6)} == 6 && ${R_Ip6ConfigInterfaceId.Id(7)} == 7} {
> + set assert pass
> +} else {
> + set assert fail
> +}
> +RecordAssertion $assert $Ip6ConfigGetDataFunc1AssertionGuid002 \
> + "Set AltInterfaceId succeeds(event is signaled correctly and data correct)."
> +
> +#
> +# Check Point: Call Ip6Config->SetData to set DadXmits
> +#
> +SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> +SetVar R_Ip6ConfigDataSize [Sizeof EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS]
> +SetVar R_Ip6ConfigDadTransmits.DupAddrDetectTransmits 3
> +
> +SetVar R_Context1 0
> +BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context1,\
> + &@R_DoneEvent1, &@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "BS.CreateEvent." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.RegisterDataNotify - Register notification event for configuration." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigDadTransmits,&@R_Status"
> +GetAck
> +GetVar R_Status
> +if { $R_Status == $EFI_SUCCESS } {
> + set assert pass
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.GetData - Call GetData to set DadXmits." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +} elseif { $R_Status == $EFI_NOT_READY } {
> + set i 0
> + set L_TimeOut 30
> + while { 1 > 0 } {
> + GetVar R_Context1
> + if { $R_Context1 == 1 } {
> + break
> + } elseif { $i == $L_TimeOut } {
> + set assert fail
> + RecordAssertion $assert $GenericAssertionGuid \
> + "GetData failed.(event hasn't been signaled before TIMEOUT)." \
> + "TIMEOUT value is $L_TimeOut (sec), "
> + SetVar R_Ip6ConfigDataType $IP6CDT(AltInterfaceId)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_GETDATA_FUNC1
> + EndLog
> + return
> + }
> + incr i
> + Stall 1
> + }
> +} else {
> + set assert fail
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.GetData - Call GetData to set manual DadXmits." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> + SetVar R_Ip6ConfigDataType $IP6CDT(AltInterfaceId)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_GETDATA_FUNC1
> + EndLog
> + return
> +}
> +
> +Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigDadTransmits,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $Ip6ConfigGetDataFunc1AssertionGuid003 \
> + "Ip6Config.GetData - Call GetData to get DadXmits value." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +GetVar R_Ip6ConfigDadTransmits
> +if { ${R_Ip6ConfigDadTransmits.DupAddrDetectTransmits} == 3 } {
> + set assert pass
> +} else {
> + set assert fail
> +}
> +RecordAssertion $assert $Ip6ConfigGetDataFunc1AssertionGuid004 \
> + "Set DadXmits succeeds(event is signaled correctly and data correct)."
> +
> +#
> +# Clean up
> +#
> +SetVar R_Ip6ConfigDataType $IP6CDT(AltInterfaceId)
> +Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.UnregisterDataNotify - Unregister notification event for configuration." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +BS->CloseEvent {@R_DoneEvent,&@R_Status}
> +GetAck
> +
> +SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> +Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.UnregisterDataNotify - Unregister notification event for configuration." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> +GetAck
> +
> +EndScope _IP6CONFIG_GETDATA_FUNC1
> +
> EndLog
> \ No newline at end of file
> diff --git a/uefi-sct/EMS/Bin/TestCase/IP6Config/Include/Ip6Config.inc.tcl b/uefi-sct/EMS/Bin/TestCase/IP6Config/Include/Ip6Config.inc.tcl
> index 918038d..9e162e7 100644
> --- a/uefi-sct/EMS/Bin/TestCase/IP6Config/Include/Ip6Config.inc.tcl
> +++ b/uefi-sct/EMS/Bin/TestCase/IP6Config/Include/Ip6Config.inc.tcl
> @@ -1,96 +1,96 @@
> -#
> -# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
> -# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
> -#
> -# This program and the accompanying materials
> -# are licensed and made available under the terms and conditions of the BSD License
> -# which accompanies this distribution. The full text of the license may be found at
> -# http://opensource.org/licenses/bsd-license.php
> -#
> -# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> -# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
> -#
> -if {[info exist IP6CONFIG_INC] == 1} {
> - return
> -}
> -set IP6CONFIG_INC 1
> -
> -Include Include/EntsProtocolTest.inc.tcl
> -Include Include/EntsConfigure.tcl
> -Include Include/EfiBootService.inc.tcl
> -Include Include/EfiGenericService.inc.tcl
> -Include EfiUtil/EfiInclude.tcl
> -
> -Include IP6/Include/Ip6.inc.tcl
> -Include IP6Config/Include/Ip6ConfigDefine.tcl
> -Include IP6Config/Include/Ip6Config.proc.tcl
> -Include IP6Config/Include/Ip6ConfigAssertionGuid.tcl
> -Include Include/GenericAssertionGuid.tcl
> -
> -###################################################################
> -# Function Declaration
> -###################################################################
> -Func Ip6Config->SetData {
> - UINT32
> - UINTN
> - POINTER
> - POINTER
> -}
> -
> -Func Ip6Config->GetData {
> - UINT32
> - POINTER
> - POINTER
> - POINTER
> -}
> -
> -Func Ip6Config->RegisterDataNotify {
> - UINT32
> - UINTN
> - POINTER
> -}
> -
> -Func Ip6Config->UnregisterDataNotify {
> - UINT32
> - UINTN
> - POINTER
> -}
> -
> -
> -###################################################################
> -# EFI_IP6_CONFIG_INTERFACE_INFO
> -###################################################################
> -Struct EFI_IP6_CONFIG_INTERFACE_INFO {
> - CHAR16 Name(32);
> - UINT8 IfType;
> - UINT32 HwAddressSize;
> - EFI_MAC_ADDRESS HwAddress;
> - UINT32 AddressInfoCount;
> - POINTER AddressInfo;
> - UINT32 RouteCount;
> - POINTER RouteTable;
> -}
> -
> -###################################################################
> -# EFI_IP6_CONFIG_INTERFACE_ID
> -###################################################################
> -Struct EFI_IP6_CONFIG_INTERFACE_ID {
> - UINT8 Id(8);
> -}
> -
> -###################################################################
> -# EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS
> -###################################################################
> -Struct EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS {
> - UINT32 DupAddrDetectTransmits;
> -}
> -
> -###################################################################
> -# EFI_IP6_CONFIG_MANUAL_ADDRESS
> -###################################################################
> -Struct EFI_IP6_CONFIG_MANUAL_ADDRESS {
> - EFI_IPv6_ADDRESS Address;
> - BOOLEAN IsAnycast;
> - UINT8 PrefixLength;
> -}
> -
> +#
> +# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
> +# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
> +#
> +# This program and the accompanying materials
> +# are licensed and made available under the terms and conditions of the BSD License
> +# which accompanies this distribution. The full text of the license may be found at
> +# http://opensource.org/licenses/bsd-license.php
> +#
> +# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> +# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
> +#
> +if {[info exist IP6CONFIG_INC] == 1} {
> + return
> +}
> +set IP6CONFIG_INC 1
> +
> +Include Include/EntsProtocolTest.inc.tcl
> +Include Include/EntsConfigure.tcl
> +Include Include/EfiBootService.inc.tcl
> +Include Include/EfiGenericService.inc.tcl
> +Include EfiUtil/EfiInclude.tcl
> +
> +Include IP6/Include/Ip6.inc.tcl
> +Include IP6Config/Include/Ip6ConfigDefine.tcl
> +Include IP6Config/Include/Ip6Config.proc.tcl
> +Include IP6Config/Include/Ip6ConfigAssertionGuid.tcl
> +Include Include/GenericAssertionGuid.tcl
> +
> +###################################################################
> +# Function Declaration
> +###################################################################
> +Func Ip6Config->SetData {
> + UINT32
> + UINTN
> + POINTER
> + POINTER
> +}
> +
> +Func Ip6Config->GetData {
> + UINT32
> + POINTER
> + POINTER
> + POINTER
> +}
> +
> +Func Ip6Config->RegisterDataNotify {
> + UINT32
> + UINTN
> + POINTER
> +}
> +
> +Func Ip6Config->UnregisterDataNotify {
> + UINT32
> + UINTN
> + POINTER
> +}
> +
> +
> +###################################################################
> +# EFI_IP6_CONFIG_INTERFACE_INFO
> +###################################################################
> +Struct EFI_IP6_CONFIG_INTERFACE_INFO {
> + CHAR16 Name(32);
> + UINT8 IfType;
> + UINT32 HwAddressSize;
> + EFI_MAC_ADDRESS HwAddress;
> + UINT32 AddressInfoCount;
> + POINTER AddressInfo;
> + UINT32 RouteCount;
> + POINTER RouteTable;
> +}
> +
> +###################################################################
> +# EFI_IP6_CONFIG_INTERFACE_ID
> +###################################################################
> +Struct EFI_IP6_CONFIG_INTERFACE_ID {
> + UINT8 Id(8);
> +}
> +
> +###################################################################
> +# EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS
> +###################################################################
> +Struct EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS {
> + UINT32 DupAddrDetectTransmits;
> +}
> +
> +###################################################################
> +# EFI_IP6_CONFIG_MANUAL_ADDRESS
> +###################################################################
> +Struct EFI_IP6_CONFIG_MANUAL_ADDRESS {
> + EFI_IPv6_ADDRESS Address;
> + BOOLEAN IsAnycast;
> + UINT8 PrefixLength;
> +}
> +
> diff --git a/uefi-sct/EMS/Bin/TestCase/IP6Config/Include/Ip6Config.proc.tcl b/uefi-sct/EMS/Bin/TestCase/IP6Config/Include/Ip6Config.proc.tcl
> index de40066..f2a2dda 100644
> --- a/uefi-sct/EMS/Bin/TestCase/IP6Config/Include/Ip6Config.proc.tcl
> +++ b/uefi-sct/EMS/Bin/TestCase/IP6Config/Include/Ip6Config.proc.tcl
> @@ -1,16 +1,16 @@
> -#
> -# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
> -# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
> -#
> -# This program and the accompanying materials
> -# are licensed and made available under the terms and conditions of the BSD License
> -# which accompanies this distribution. The full text of the license may be found at
> -# http://opensource.org/licenses/bsd-license.php
> -#
> -# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> -# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
> -#
> -if {[info exist IP6CONFIG_PROC] == 1} {
> - return
> -}
> +#
> +# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
> +# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
> +#
> +# This program and the accompanying materials
> +# are licensed and made available under the terms and conditions of the BSD License
> +# which accompanies this distribution. The full text of the license may be found at
> +# http://opensource.org/licenses/bsd-license.php
> +#
> +# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> +# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
> +#
> +if {[info exist IP6CONFIG_PROC] == 1} {
> + return
> +}
> set IP6CONFIG_PROC 1
> \ No newline at end of file
> diff --git a/uefi-sct/EMS/Bin/TestCase/IP6Config/Include/Ip6ConfigAssertionGuid.tcl b/uefi-sct/EMS/Bin/TestCase/IP6Config/Include/Ip6ConfigAssertionGuid.tcl
> index 9356240..da69bf9 100644
> --- a/uefi-sct/EMS/Bin/TestCase/IP6Config/Include/Ip6ConfigAssertionGuid.tcl
> +++ b/uefi-sct/EMS/Bin/TestCase/IP6Config/Include/Ip6ConfigAssertionGuid.tcl
> @@ -1,84 +1,96 @@
> -#
> -# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
> -# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
> -#
> -# This program and the accompanying materials
> -# are licensed and made available under the terms and conditions of the BSD License
> -# which accompanies this distribution. The full text of the license may be found at
> -# http://opensource.org/licenses/bsd-license.php
> -#
> -# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> -# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
> -#
> -#
> -# Guid for SetData() interface
> -#
> -set Ip6ConfigSetDataConf1AssertionGuid001 7A224CCE-B79B-472a-9B8C-A47E074D5EEF
> -set Ip6ConfigSetDataConf2AssertionGuid001 46F12872-61F2-46e4-A2F9-5F685B419479
> -set Ip6ConfigSetDataConf2AssertionGuid002 1CAC93D3-732A-4e30-894D-EE63B6F486A0
> -set Ip6ConfigSetDataConf2AssertionGuid003 D005EBF3-CFD6-498a-9005-C2B3702EB4FC
> -set Ip6ConfigSetDataConf2AssertionGuid004 389806D5-4506-4319-8D17-9B4FC9D97E25
> -set Ip6ConfigSetDataConf2AssertionGuid005 5AEFDB0C-322F-49c3-9DD2-DFE21B66B308
> -set Ip6ConfigSetDataConf2AssertionGuid006 D339988F-2595-4fb5-81AE-A94DC470B234
> -set Ip6ConfigSetDataConf3AssertionGuid001 4319A43B-7641-47c0-84BB-985C479902A2
> -set Ip6ConfigSetDataConf4AssertionGuid001 01F3B344-EB52-4086-B949-55D7E4DC5BDE
> -set Ip6ConfigSetDataConf4AssertionGuid002 F612AF26-2519-497c-B205-37A2914AEE05
> -set Ip6ConfigSetDataConf4AssertionGuid003 592C1F3D-249E-4654-B4B1-600421624DD1
> -set Ip6ConfigSetDataConf5AssertionGuid001 D70BEC29-8026-4e1b-BA8B-36A313B45859
> -set Ip6ConfigSetDataConf5AssertionGuid002 FE793490-53F8-4991-8348-E624530E83E9
> -set Ip6ConfigSetDataConf5AssertionGuid003 42CCB2EF-D706-4d1a-B247-F42BBA99F707
> -set Ip6ConfigSetDataConf5AssertionGuid004 9168CB20-C891-42da-BB9F-7ADBE488B012
> -set Ip6ConfigSetDataConf5AssertionGuid005 AD058D87-1015-4b2d-A351-5BD4B0930B7B
> -set Ip6ConfigSetDataConf5AssertionGuid006 388BE3F6-D63E-4cbf-A3D9-3D941823259B
> -set Ip6ConfigSetDataConf6AssertionGuid001 2886BAE1-383A-400f-8F88-66376B2A0FF5
> -set Ip6ConfigSetDataConf7AssertionGuid001 D2C61F06-8822-4a09-89A1-7F0667FCAF0E
> -set Ip6ConfigSetDataFunc1AssertionGuid001 0A5902DA-4142-4494-AC66-2B731FFEA671
> -set Ip6ConfigSetDataFunc1AssertionGuid002 D9A9EF5E-D819-49d0-BB12-25ADEC52DDB3
> -set Ip6ConfigSetDataFunc1AssertionGuid003 14E96019-0815-4486-916C-E440E166628E
> -set Ip6ConfigSetDataFunc1AssertionGuid004 3458BBE0-0D7E-48ec-B380-2A885F44E104
> -
> -
> -#
> -# Guid for GetData() interface
> -#
> -set Ip6ConfigGetDataConf1AssertionGuid001 D15E421D-6228-4fea-8D5A-330FFF3F80D2
> -set Ip6ConfigGetDataConf2AssertionGuid001 38B36C04-12E9-4e96-B24F-C453851E6C1D
> -set Ip6ConfigGetDataConf3AssertionGuid001 D05A6C59-617F-4549-9659-4E0CFC3C3336
> -set Ip6ConfigGetDataConf3AssertionGuid002 ED45C2FE-9EC1-4553-AFA4-771E9D4F7611
> -set Ip6ConfigGetDataConf4AssertionGuid001 59118C46-2F2A-4029-ABD6-767418920369
> -set Ip6ConfigGetDataConf5AssertionGuid001 55955D09-C806-4777-9FF0-95C00E79AC28
> -set Ip6ConfigGetDataFunc1AssertionGuid001 FEAAC1A0-95BD-4dcb-91C3-9F08504BEFA1
> -set Ip6ConfigGetDataFunc1AssertionGuid002 3649D729-D6D0-456e-84AE-C7E7B8464343
> -set Ip6ConfigGetDataFunc1AssertionGuid003 165E79B4-C987-4100-8AA2-8AB115B07FAD
> -set Ip6ConfigGetDataFunc1AssertionGuid004 DB420311-17F7-40cf-A0B1-0294D5DCCC92
> -
> -#
> -# Guid for RegisterDataNotify() interface
> -#
> -set Ip6ConfigRegisterDataNotifyConf1AssertionGuid001 7E3F6157-EC75-4ecd-A79B-4926F3AA1C0D
> -set Ip6ConfigRegisterDataNotifyConf2AssertionGuid001 70DC8C71-C54D-4446-8AD9-BAC086E43D17
> -set Ip6ConfigRegisterDataNotifyConf3AssertionGuid001 2D88F18B-0BEF-4616-BDE5-CA4E0086E1D3
> -set Ip6ConfigRegisterDataNotifyFunc1AssertionGuid001 9A98DC85-D018-45aa-B851-34EE2F6716D4
> -set Ip6ConfigRegisterDataNotifyFunc1AssertionGuid002 39F7FB37-9F9F-485e-8DBC-0F3191DA9909
> -set Ip6ConfigRegisterDataNotifyFunc1AssertionGuid003 D13DA599-37E7-474a-9343-83C9EFE80893
> -set Ip6ConfigRegisterDataNotifyFunc1AssertionGuid004 5428BDD5-4332-4e3b-841F-3E60540AA35D
> -set Ip6ConfigRegisterDataNotifyFunc1AssertionGuid005 1844A7C8-730C-4927-8E02-CE0A6CA08DCC
> -set Ip6ConfigRegisterDataNotifyFunc1AssertionGuid006 B0E66591-9076-48e3-8DF6-2A1D59A572DB
> -
> -
> -#
> -# Guid for UnregisterDataNotify() interface
> -#
> -set Ip6ConfigUnregisterDataNotifyConf1AssertionGuid001 8AB0E5A2-A4E1-4282-87B5-E377C763AD2F
> -set Ip6ConfigUnregisterDataNotifyConf2AssertionGuid001 5C68228F-AAAE-4d0b-9927-7664476EF360
> -set Ip6ConfigUnregisterDataNotifyConf2AssertionGuid002 55D8193E-F58E-4800-924B-73C902098DD8
> -set Ip6ConfigUnregisterDataNotifyFunc1AssertionGuid001 42EB4628-8DF6-4704-81E5-F7EAE6CBB270
> -set Ip6ConfigUnregisterDataNotifyFunc1AssertionGuid002 174CEC07-E573-434b-8E99-77F8AE9C55B5
> -set Ip6ConfigUnregisterDataNotifyFunc1AssertionGuid003 1F5EF1AF-8A19-48d6-831F-51BE00B32AA5
> -set Ip6ConfigUnregisterDataNotifyFunc1AssertionGuid004 388C8838-7790-4a1f-9DB7-5017D7AA60DB
> -
> -
> -
> -
> -
> -
> +#
> +# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
> +# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
> +#
> +# This program and the accompanying materials
> +# are licensed and made available under the terms and conditions of the BSD License
> +# which accompanies this distribution. The full text of the license may be found at
> +# http://opensource.org/licenses/bsd-license.php
> +#
> +# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> +# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
> +#
> +#
> +# Guid for SetData() interface
> +#
> +set Ip6ConfigSetDataConf1AssertionGuid001 7A224CCE-B79B-472a-9B8C-A47E074D5EEF
> +set Ip6ConfigSetDataConf2AssertionGuid001 46F12872-61F2-46e4-A2F9-5F685B419479
> +set Ip6ConfigSetDataConf2AssertionGuid002 1CAC93D3-732A-4e30-894D-EE63B6F486A0
> +set Ip6ConfigSetDataConf2AssertionGuid003 D005EBF3-CFD6-498a-9005-C2B3702EB4FC
> +set Ip6ConfigSetDataConf2AssertionGuid004 389806D5-4506-4319-8D17-9B4FC9D97E25
> +set Ip6ConfigSetDataConf2AssertionGuid005 5AEFDB0C-322F-49c3-9DD2-DFE21B66B308
> +set Ip6ConfigSetDataConf2AssertionGuid006 D339988F-2595-4fb5-81AE-A94DC470B234
> +set Ip6ConfigSetDataConf3AssertionGuid001 4319A43B-7641-47c0-84BB-985C479902A2
> +set Ip6ConfigSetDataConf4AssertionGuid001 01F3B344-EB52-4086-B949-55D7E4DC5BDE
> +set Ip6ConfigSetDataConf4AssertionGuid002 F612AF26-2519-497c-B205-37A2914AEE05
> +set Ip6ConfigSetDataConf4AssertionGuid003 592C1F3D-249E-4654-B4B1-600421624DD1
> +set Ip6ConfigSetDataConf5AssertionGuid001 D70BEC29-8026-4e1b-BA8B-36A313B45859
> +set Ip6ConfigSetDataConf5AssertionGuid002 FE793490-53F8-4991-8348-E624530E83E9
> +set Ip6ConfigSetDataConf5AssertionGuid003 42CCB2EF-D706-4d1a-B247-F42BBA99F707
> +set Ip6ConfigSetDataConf5AssertionGuid004 9168CB20-C891-42da-BB9F-7ADBE488B012
> +set Ip6ConfigSetDataConf5AssertionGuid005 AD058D87-1015-4b2d-A351-5BD4B0930B7B
> +set Ip6ConfigSetDataConf5AssertionGuid006 388BE3F6-D63E-4cbf-A3D9-3D941823259B
> +set Ip6ConfigSetDataConf6AssertionGuid001 2886BAE1-383A-400f-8F88-66376B2A0FF5
> +set Ip6ConfigSetDataConf7AssertionGuid001 D2C61F06-8822-4a09-89A1-7F0667FCAF0E
> +set Ip6ConfigSetDataFunc1AssertionGuid001 0A5902DA-4142-4494-AC66-2B731FFEA671
> +set Ip6ConfigSetDataFunc1AssertionGuid002 D9A9EF5E-D819-49d0-BB12-25ADEC52DDB3
> +set Ip6ConfigSetDataFunc1AssertionGuid003 14E96019-0815-4486-916C-E440E166628E
> +set Ip6ConfigSetDataFunc1AssertionGuid004 3458BBE0-0D7E-48ec-B380-2A885F44E104
> +
> +set Ip6ConfigSetDataFunc2AssertionGuid001 B533A7CF-6C27-421A-A816-B075E7EA4573
> +set Ip6ConfigSetDataFunc2AssertionGuid002 C816C0EE-52C0-400E-A9CC-25C263E27B04
> +set Ip6ConfigSetDataFunc2AssertionGuid003 2CF2435A-C444-4E09-BC8A-56A6F33CED9C
> +set Ip6ConfigSetDataFunc2AssertionGuid004 3B673875-4CE8-4F23-8FE1-E440376604FD
> +set Ip6ConfigSetDataFunc2AssertionGuid005 05B7BF41-9CE9-481B-B9A4-2E83AD5E89E3
> +set Ip6ConfigSetDataFunc2AssertionGuid006 4D49A668-A44D-4D69-9F20-40B7F147988E
> +set Ip6ConfigSetDataFunc2AssertionGuid007 23000969-DFDE-4B04-AD44-0844D595AA66
> +set Ip6ConfigSetDataFunc2AssertionGuid008 E444B75C-B559-48C4-8D15-8F882AC7F81E
> +set Ip6ConfigSetDataFunc2AssertionGuid009 AC649D07-2063-4045-9DAE-29B4E38E46BB
> +set Ip6ConfigSetDataFunc2AssertionGuid010 4EDBB740-405F-4E6D-A4A5-D77122D16278
> +set Ip6ConfigSetDataFunc2AssertionGuid011 D131A6D9-CCAB-4460-8402-80ED252FEB09
> +set Ip6ConfigSetDataFunc2AssertionGuid012 A5D75088-D8D3-47DD-A623-F6098DF70546
> +
> +#
> +# Guid for GetData() interface
> +#
> +set Ip6ConfigGetDataConf1AssertionGuid001 D15E421D-6228-4fea-8D5A-330FFF3F80D2
> +set Ip6ConfigGetDataConf2AssertionGuid001 38B36C04-12E9-4e96-B24F-C453851E6C1D
> +set Ip6ConfigGetDataConf3AssertionGuid001 D05A6C59-617F-4549-9659-4E0CFC3C3336
> +set Ip6ConfigGetDataConf3AssertionGuid002 ED45C2FE-9EC1-4553-AFA4-771E9D4F7611
> +set Ip6ConfigGetDataConf4AssertionGuid001 59118C46-2F2A-4029-ABD6-767418920369
> +set Ip6ConfigGetDataConf5AssertionGuid001 55955D09-C806-4777-9FF0-95C00E79AC28
> +set Ip6ConfigGetDataFunc1AssertionGuid001 FEAAC1A0-95BD-4dcb-91C3-9F08504BEFA1
> +set Ip6ConfigGetDataFunc1AssertionGuid002 3649D729-D6D0-456e-84AE-C7E7B8464343
> +set Ip6ConfigGetDataFunc1AssertionGuid003 165E79B4-C987-4100-8AA2-8AB115B07FAD
> +set Ip6ConfigGetDataFunc1AssertionGuid004 DB420311-17F7-40cf-A0B1-0294D5DCCC92
> +
> +#
> +# Guid for RegisterDataNotify() interface
> +#
> +set Ip6ConfigRegisterDataNotifyConf1AssertionGuid001 7E3F6157-EC75-4ecd-A79B-4926F3AA1C0D
> +set Ip6ConfigRegisterDataNotifyConf2AssertionGuid001 70DC8C71-C54D-4446-8AD9-BAC086E43D17
> +set Ip6ConfigRegisterDataNotifyConf3AssertionGuid001 2D88F18B-0BEF-4616-BDE5-CA4E0086E1D3
> +set Ip6ConfigRegisterDataNotifyFunc1AssertionGuid001 9A98DC85-D018-45aa-B851-34EE2F6716D4
> +set Ip6ConfigRegisterDataNotifyFunc1AssertionGuid002 39F7FB37-9F9F-485e-8DBC-0F3191DA9909
> +set Ip6ConfigRegisterDataNotifyFunc1AssertionGuid003 D13DA599-37E7-474a-9343-83C9EFE80893
> +set Ip6ConfigRegisterDataNotifyFunc1AssertionGuid004 5428BDD5-4332-4e3b-841F-3E60540AA35D
> +set Ip6ConfigRegisterDataNotifyFunc1AssertionGuid005 1844A7C8-730C-4927-8E02-CE0A6CA08DCC
> +set Ip6ConfigRegisterDataNotifyFunc1AssertionGuid006 B0E66591-9076-48e3-8DF6-2A1D59A572DB
> +
> +
> +#
> +# Guid for UnregisterDataNotify() interface
> +#
> +set Ip6ConfigUnregisterDataNotifyConf1AssertionGuid001 8AB0E5A2-A4E1-4282-87B5-E377C763AD2F
> +set Ip6ConfigUnregisterDataNotifyConf2AssertionGuid001 5C68228F-AAAE-4d0b-9927-7664476EF360
> +set Ip6ConfigUnregisterDataNotifyConf2AssertionGuid002 55D8193E-F58E-4800-924B-73C902098DD8
> +set Ip6ConfigUnregisterDataNotifyFunc1AssertionGuid001 42EB4628-8DF6-4704-81E5-F7EAE6CBB270
> +set Ip6ConfigUnregisterDataNotifyFunc1AssertionGuid002 174CEC07-E573-434b-8E99-77F8AE9C55B5
> +set Ip6ConfigUnregisterDataNotifyFunc1AssertionGuid003 1F5EF1AF-8A19-48d6-831F-51BE00B32AA5
> +set Ip6ConfigUnregisterDataNotifyFunc1AssertionGuid004 388C8838-7790-4a1f-9DB7-5017D7AA60DB
> +
> +
> +
> +
> +
> +
> diff --git a/uefi-sct/EMS/Bin/TestCase/IP6Config/Include/Ip6ConfigDefine.tcl b/uefi-sct/EMS/Bin/TestCase/IP6Config/Include/Ip6ConfigDefine.tcl
> index 0d78321..1fcd579 100644
> --- a/uefi-sct/EMS/Bin/TestCase/IP6Config/Include/Ip6ConfigDefine.tcl
> +++ b/uefi-sct/EMS/Bin/TestCase/IP6Config/Include/Ip6ConfigDefine.tcl
> @@ -1,51 +1,51 @@
> -#
> -# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
> -# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
> -#
> -# This program and the accompanying materials
> -# are licensed and made available under the terms and conditions of the BSD License
> -# which accompanies this distribution. The full text of the license may be found at
> -# http://opensource.org/licenses/bsd-license.php
> -#
> -# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> -# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
> -#
> -if {[info exist IP6CONFIG_DEFINE] == 1} {
> - return
> -}
> -set IP6CONFIG_DEFINE 1
> -
> -#
> -# EUT/ENTS Connection Definition
> -#
> -#set DEF_EUT_IP_ADDR "2002:0000:0000:0000:0000:0000:0000:0001"
> -#set DEF_EUT_MAC_ADDR [GetTargetMac]
> -#set DEF_EUT_PRT 0
> -
> -#set DEF_ENTS_IP_ADDR "2002:0000:0000:0000:0000:0000:0000:4321"
> -#set DEF_ENTS_MAC_ADDR [GetHostMac]
> -#set DEF_ENTS_PRT 8888
> -
> -#
> -# EFI_IP6_CONFIG_DATA_TYPE
> -#
> -set IP6CDT(InterfaceInfo) 0
> -set IP6CDT(AltInterfaceId) 1
> -set IP6CDT(Policy) 2
> -set IP6CDT(DupAddrDetectTransmits) 3
> -set IP6CDT(ManualAddress) 4
> -set IP6CDT(Gateway) 5
> -set IP6CDT(DnsServer) 6
> -set IP6CDT(Maximum) 7
> -
> -#
> -# EFI_IP6_CONFIG_POLICY
> -#
> -set IP6CP(Manual) 0
> -set IP6CP(Automatic) 1
> -
> -#
> -# Timers
> -#
> -set i 0
> -set L_TimeOut 30
> +#
> +# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
> +# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
> +#
> +# This program and the accompanying materials
> +# are licensed and made available under the terms and conditions of the BSD License
> +# which accompanies this distribution. The full text of the license may be found at
> +# http://opensource.org/licenses/bsd-license.php
> +#
> +# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> +# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
> +#
> +if {[info exist IP6CONFIG_DEFINE] == 1} {
> + return
> +}
> +set IP6CONFIG_DEFINE 1
> +
> +#
> +# EUT/ENTS Connection Definition
> +#
> +#set DEF_EUT_IP_ADDR "2002:0000:0000:0000:0000:0000:0000:0001"
> +#set DEF_EUT_MAC_ADDR [GetTargetMac]
> +#set DEF_EUT_PRT 0
> +
> +#set DEF_ENTS_IP_ADDR "2002:0000:0000:0000:0000:0000:0000:4321"
> +#set DEF_ENTS_MAC_ADDR [GetHostMac]
> +#set DEF_ENTS_PRT 8888
> +
> +#
> +# EFI_IP6_CONFIG_DATA_TYPE
> +#
> +set IP6CDT(InterfaceInfo) 0
> +set IP6CDT(AltInterfaceId) 1
> +set IP6CDT(Policy) 2
> +set IP6CDT(DupAddrDetectTransmits) 3
> +set IP6CDT(ManualAddress) 4
> +set IP6CDT(Gateway) 5
> +set IP6CDT(DnsServer) 6
> +set IP6CDT(Maximum) 7
> +
> +#
> +# EFI_IP6_CONFIG_POLICY
> +#
> +set IP6CP(Manual) 0
> +set IP6CP(Automatic) 1
> +
> +#
> +# Timers
> +#
> +set i 0
> +set L_TimeOut 30
> diff --git a/uefi-sct/EMS/Bin/TestCase/IP6Config/RegisterDataNotify.Conf1.Case1.tcl b/uefi-sct/EMS/Bin/TestCase/IP6Config/RegisterDataNotify.Conf1.Case1.tcl
> index f8a97a1..aa60cb8 100644
> --- a/uefi-sct/EMS/Bin/TestCase/IP6Config/RegisterDataNotify.Conf1.Case1.tcl
> +++ b/uefi-sct/EMS/Bin/TestCase/IP6Config/RegisterDataNotify.Conf1.Case1.tcl
> @@ -1,90 +1,90 @@
> -#
> -# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
> -# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
> -#
> -# This program and the accompanying materials
> -# are licensed and made available under the terms and conditions of the BSD License
> -# which accompanies this distribution. The full text of the license may be found at
> -# http://opensource.org/licenses/bsd-license.php
> -#
> -# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> -# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
> -#
> -################################################################################
> -CaseLevel CONFORMANCE
> -CaseAttribute AUTO
> -CaseVerboseLevel DEFAULT
> -set reportfile report.csv
> -
> -#
> -# test case Name, category, description, GUID...
> -#
> -CaseGuid F76B637C-BA5F-4451-8DF4-A13E1CCAB3A0
> -CaseName RegisterDataNotify.Conf1.Case1
> -CaseCategory IP6Config
> -CaseDescription {RegisterDataNotify must not succeed when event is NULL.}
> -
> -################################################################################
> -Include IP6Config/Include/Ip6Config.inc.tcl
> -
> -
> -#
> -# Begin log ...
> -#
> -BeginLog
> -
> -#
> -# BeginScope
> -#
> -BeginScope _IP6CONFIG_REGISTERDATANOTIFY_CONF1
> -
> -#
> -# Parameter Definition
> -# R_ represents "Remote EFI Side Parameter"
> -# L_ represents "Local ENTS Side Parameter"
> -#
> -UINTN R_Status
> -UINTN R_Context
> -UINTN R_DoneEvent
> -UINTN R_Ip6ConfigDataSize
> -UINT32 R_Ip6ConfigDataType
> -EFI_IP6_CONFIG_INTERFACE_INFO R_Ip6ConfigInterfaceInfo
> -EFI_IP6_CONFIG_INTERFACE_ID R_Ip6ConfigInterfaceId
> -UINT32 R_Ip6ConfigPolicy
> -EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS R_Ip6ConfigDadTransmits
> -
> -#
> -# Check Point: Call Ip6Config->SetData to set manual policy
> -#
> -SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> -SetVar R_Ip6ConfigDataSize [Sizeof UINT32]
> -SetVar R_Ip6ConfigPolicy $IP6CP(Manual)
> -
> -SetVar R_Context 0
> -BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context,\
> - &@R_DoneEvent, &@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "BS.CreateEvent." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -#
> -# Check Point: Call Ip6Config->RegisterDataNotify with event NULL
> -#
> -Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType, 0 ,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_INVALID_PARAMETER]
> -RecordAssertion $assert $Ip6ConfigRegisterDataNotifyConf1AssertionGuid001 \
> - "Ip6Config.RegisterDataNotify - Register notification event with the event NULL." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_INVALID_PARAMETER"
> -
> -#
> -# Clean up
> -#
> -BS->CloseEvent {@R_DoneEvent,&@R_Status}
> -GetAck
> -
> -EndScope _IP6CONFIG_REGISTERDATANOTIFY_CONF1
> -
> +#
> +# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
> +# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
> +#
> +# This program and the accompanying materials
> +# are licensed and made available under the terms and conditions of the BSD License
> +# which accompanies this distribution. The full text of the license may be found at
> +# http://opensource.org/licenses/bsd-license.php
> +#
> +# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> +# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
> +#
> +################################################################################
> +CaseLevel CONFORMANCE
> +CaseAttribute AUTO
> +CaseVerboseLevel DEFAULT
> +set reportfile report.csv
> +
> +#
> +# test case Name, category, description, GUID...
> +#
> +CaseGuid F76B637C-BA5F-4451-8DF4-A13E1CCAB3A0
> +CaseName RegisterDataNotify.Conf1.Case1
> +CaseCategory IP6Config
> +CaseDescription {RegisterDataNotify must not succeed when event is NULL.}
> +
> +################################################################################
> +Include IP6Config/Include/Ip6Config.inc.tcl
> +
> +
> +#
> +# Begin log ...
> +#
> +BeginLog
> +
> +#
> +# BeginScope
> +#
> +BeginScope _IP6CONFIG_REGISTERDATANOTIFY_CONF1
> +
> +#
> +# Parameter Definition
> +# R_ represents "Remote EFI Side Parameter"
> +# L_ represents "Local ENTS Side Parameter"
> +#
> +UINTN R_Status
> +UINTN R_Context
> +UINTN R_DoneEvent
> +UINTN R_Ip6ConfigDataSize
> +UINT32 R_Ip6ConfigDataType
> +EFI_IP6_CONFIG_INTERFACE_INFO R_Ip6ConfigInterfaceInfo
> +EFI_IP6_CONFIG_INTERFACE_ID R_Ip6ConfigInterfaceId
> +UINT32 R_Ip6ConfigPolicy
> +EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS R_Ip6ConfigDadTransmits
> +
> +#
> +# Check Point: Call Ip6Config->SetData to set manual policy
> +#
> +SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> +SetVar R_Ip6ConfigDataSize [Sizeof UINT32]
> +SetVar R_Ip6ConfigPolicy $IP6CP(Manual)
> +
> +SetVar R_Context 0
> +BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context,\
> + &@R_DoneEvent, &@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "BS.CreateEvent." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +#
> +# Check Point: Call Ip6Config->RegisterDataNotify with event NULL
> +#
> +Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType, 0 ,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_INVALID_PARAMETER]
> +RecordAssertion $assert $Ip6ConfigRegisterDataNotifyConf1AssertionGuid001 \
> + "Ip6Config.RegisterDataNotify - Register notification event with the event NULL." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_INVALID_PARAMETER"
> +
> +#
> +# Clean up
> +#
> +BS->CloseEvent {@R_DoneEvent,&@R_Status}
> +GetAck
> +
> +EndScope _IP6CONFIG_REGISTERDATANOTIFY_CONF1
> +
> EndLog
> \ No newline at end of file
> diff --git a/uefi-sct/EMS/Bin/TestCase/IP6Config/RegisterDataNotify.Conf2.Case1.tcl b/uefi-sct/EMS/Bin/TestCase/IP6Config/RegisterDataNotify.Conf2.Case1.tcl
> index 3e72249..38b7431 100644
> --- a/uefi-sct/EMS/Bin/TestCase/IP6Config/RegisterDataNotify.Conf2.Case1.tcl
> +++ b/uefi-sct/EMS/Bin/TestCase/IP6Config/RegisterDataNotify.Conf2.Case1.tcl
> @@ -1,90 +1,90 @@
> -#
> -# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
> -# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
> -#
> -# This program and the accompanying materials
> -# are licensed and made available under the terms and conditions of the BSD License
> -# which accompanies this distribution. The full text of the license may be found at
> -# http://opensource.org/licenses/bsd-license.php
> -#
> -# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> -# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
> -#
> -################################################################################
> -CaseLevel CONFORMANCE
> -CaseAttribute AUTO
> -CaseVerboseLevel DEFAULT
> -set reportfile report.csv
> -
> -#
> -# test case Name, category, description, GUID...
> -#
> -CaseGuid E5221141-97BC-4e5f-9ABA-304BB11EADA0
> -CaseName RegisterDataNotify.Conf2.Case1
> -CaseCategory IP6Config
> -CaseDescription {RegisterDataNotify must not succeed when data type is not supported.}
> -
> -################################################################################
> -Include IP6Config/Include/Ip6Config.inc.tcl
> -
> -
> -#
> -# Begin log ...
> -#
> -BeginLog
> -
> -#
> -# BeginScope
> -#
> -BeginScope _IP6CONFIG_REGISTERDATANOTIFY_CONF2
> -
> -#
> -# Parameter Definition
> -# R_ represents "Remote EFI Side Parameter"
> -# L_ represents "Local ENTS Side Parameter"
> -#
> -UINTN R_Status
> -UINTN R_Context
> -UINTN R_DoneEvent
> -UINTN R_Ip6ConfigDataSize
> -UINT32 R_Ip6ConfigDataType
> -UINTN R_Ip6ConfigDataTypeMaximum
> -EFI_IP6_CONFIG_INTERFACE_INFO R_Ip6ConfigInterfaceInfo
> -EFI_IP6_CONFIG_INTERFACE_ID R_Ip6ConfigInterfaceId
> -UINT32 R_Ip6ConfigPolicy
> -EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS R_Ip6ConfigDadTransmits
> -
> -#
> -# Check Point: Call Ip6Config->SetData to set manual policy
> -#
> -SetVar R_Ip6ConfigDataType $IP6CDT(Maximum)
> -SetVar R_Ip6ConfigDataSize [Sizeof UINTN]
> -
> -SetVar R_Context 0
> -BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context,\
> - &@R_DoneEvent, &@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "BS.CreateEvent." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -#
> -# Check Point: Call Ip6Config->RegisterDataNotify with the datatype not supported
> -#
> -Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType, @R_DoneEvent ,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_UNSUPPORTED]
> -RecordAssertion $assert $Ip6ConfigRegisterDataNotifyConf2AssertionGuid001 \
> - "Ip6Config.RegisterDataNotify - Register notification event with the data type not supported." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_UNSUPPORTED"
> -
> -#
> -# Clean up
> -#
> -BS->CloseEvent {@R_DoneEvent,&@R_Status}
> -GetAck
> -
> -EndScope _IP6CONFIG_REGISTERDATANOTIFY_CONF2
> -
> +#
> +# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
> +# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
> +#
> +# This program and the accompanying materials
> +# are licensed and made available under the terms and conditions of the BSD License
> +# which accompanies this distribution. The full text of the license may be found at
> +# http://opensource.org/licenses/bsd-license.php
> +#
> +# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> +# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
> +#
> +################################################################################
> +CaseLevel CONFORMANCE
> +CaseAttribute AUTO
> +CaseVerboseLevel DEFAULT
> +set reportfile report.csv
> +
> +#
> +# test case Name, category, description, GUID...
> +#
> +CaseGuid E5221141-97BC-4e5f-9ABA-304BB11EADA0
> +CaseName RegisterDataNotify.Conf2.Case1
> +CaseCategory IP6Config
> +CaseDescription {RegisterDataNotify must not succeed when data type is not supported.}
> +
> +################################################################################
> +Include IP6Config/Include/Ip6Config.inc.tcl
> +
> +
> +#
> +# Begin log ...
> +#
> +BeginLog
> +
> +#
> +# BeginScope
> +#
> +BeginScope _IP6CONFIG_REGISTERDATANOTIFY_CONF2
> +
> +#
> +# Parameter Definition
> +# R_ represents "Remote EFI Side Parameter"
> +# L_ represents "Local ENTS Side Parameter"
> +#
> +UINTN R_Status
> +UINTN R_Context
> +UINTN R_DoneEvent
> +UINTN R_Ip6ConfigDataSize
> +UINT32 R_Ip6ConfigDataType
> +UINTN R_Ip6ConfigDataTypeMaximum
> +EFI_IP6_CONFIG_INTERFACE_INFO R_Ip6ConfigInterfaceInfo
> +EFI_IP6_CONFIG_INTERFACE_ID R_Ip6ConfigInterfaceId
> +UINT32 R_Ip6ConfigPolicy
> +EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS R_Ip6ConfigDadTransmits
> +
> +#
> +# Check Point: Call Ip6Config->SetData to set manual policy
> +#
> +SetVar R_Ip6ConfigDataType $IP6CDT(Maximum)
> +SetVar R_Ip6ConfigDataSize [Sizeof UINTN]
> +
> +SetVar R_Context 0
> +BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context,\
> + &@R_DoneEvent, &@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "BS.CreateEvent." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +#
> +# Check Point: Call Ip6Config->RegisterDataNotify with the datatype not supported
> +#
> +Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType, @R_DoneEvent ,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_UNSUPPORTED]
> +RecordAssertion $assert $Ip6ConfigRegisterDataNotifyConf2AssertionGuid001 \
> + "Ip6Config.RegisterDataNotify - Register notification event with the data type not supported." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_UNSUPPORTED"
> +
> +#
> +# Clean up
> +#
> +BS->CloseEvent {@R_DoneEvent,&@R_Status}
> +GetAck
> +
> +EndScope _IP6CONFIG_REGISTERDATANOTIFY_CONF2
> +
> EndLog
> \ No newline at end of file
> diff --git a/uefi-sct/EMS/Bin/TestCase/IP6Config/RegisterDataNotify.Conf3.Case1.tcl b/uefi-sct/EMS/Bin/TestCase/IP6Config/RegisterDataNotify.Conf3.Case1.tcl
> index 8c8363c..77d9ef5 100644
> --- a/uefi-sct/EMS/Bin/TestCase/IP6Config/RegisterDataNotify.Conf3.Case1.tcl
> +++ b/uefi-sct/EMS/Bin/TestCase/IP6Config/RegisterDataNotify.Conf3.Case1.tcl
> @@ -1,109 +1,109 @@
> -#
> -# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
> -# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
> -#
> -# This program and the accompanying materials
> -# are licensed and made available under the terms and conditions of the BSD License
> -# which accompanies this distribution. The full text of the license may be found at
> -# http://opensource.org/licenses/bsd-license.php
> -#
> -# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> -# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
> -#
> -################################################################################
> -CaseLevel CONFORMANCE
> -CaseAttribute AUTO
> -CaseVerboseLevel DEFAULT
> -set reportfile report.csv
> -
> -#
> -# test case Name, category, description, GUID...
> -#
> -CaseGuid B00EBD2E-F23E-434e-80E8-2A17C3BCFDFE
> -CaseName RegisterDataNotify.Conf3.Case1
> -CaseCategory IP6Config
> -CaseDescription {RegisterDataNotify must not succeed when event has already registered.}
> -
> -################################################################################
> -Include IP6Config/Include/Ip6Config.inc.tcl
> -
> -
> -#
> -# Begin log ...
> -#
> -BeginLog
> -
> -#
> -# BeginScope
> -#
> -BeginScope _IP6CONFIG_REGISTERDATANOTIFY_CONF3
> -
> -#
> -# Parameter Definition
> -# R_ represents "Remote EFI Side Parameter"
> -# L_ represents "Local ENTS Side Parameter"
> -#
> -UINTN R_Status
> -UINTN R_Context
> -UINTN R_DoneEvent
> -UINTN R_Ip6ConfigDataSize
> -UINT32 R_Ip6ConfigDataType
> -EFI_IP6_CONFIG_INTERFACE_INFO R_Ip6ConfigInterfaceInfo
> -EFI_IP6_CONFIG_INTERFACE_ID R_Ip6ConfigInterfaceId
> -UINT32 R_Ip6ConfigPolicy
> -EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS R_Ip6ConfigDadTransmits
> -
> -#
> -# Check Point: Call Ip6Config->SetData to set manual policy
> -#
> -SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> -SetVar R_Ip6ConfigDataSize [Sizeof UINT32]
> -SetVar R_Ip6ConfigPolicy $IP6CP(Manual)
> -
> -SetVar R_Context 0
> -BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context,\
> - &@R_DoneEvent, &@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "BS.CreateEvent." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -#
> -# Check Point: Call Ip6Config->RegisterDataNotify with valid parameters
> -#
> -Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType, @R_DoneEvent ,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.RegisterDataNotify - Register notification event with valid parameters." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -#
> -# Check Point : Call RegisterDataNotify() with the same event (has been registered)
> -#
> -Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType, @R_DoneEvent ,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_ACCESS_DENIED]
> -RecordAssertion $assert $Ip6ConfigRegisterDataNotifyConf3AssertionGuid001 \
> - "Ip6Config.RegisterDataNotify - Register notification event with the event registered already." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_ACCESS_DENIED"
> -
> -
> -#
> -# Clean up
> -#
> -SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> -Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.UnregisterDataNotify - Unregister notification event for configuration." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -BS->CloseEvent {@R_DoneEvent,&@R_Status}
> -GetAck
> -
> -EndScope _IP6CONFIG_REGISTERDATANOTIFY_CONF3
> -
> +#
> +# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
> +# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
> +#
> +# This program and the accompanying materials
> +# are licensed and made available under the terms and conditions of the BSD License
> +# which accompanies this distribution. The full text of the license may be found at
> +# http://opensource.org/licenses/bsd-license.php
> +#
> +# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> +# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
> +#
> +################################################################################
> +CaseLevel CONFORMANCE
> +CaseAttribute AUTO
> +CaseVerboseLevel DEFAULT
> +set reportfile report.csv
> +
> +#
> +# test case Name, category, description, GUID...
> +#
> +CaseGuid B00EBD2E-F23E-434e-80E8-2A17C3BCFDFE
> +CaseName RegisterDataNotify.Conf3.Case1
> +CaseCategory IP6Config
> +CaseDescription {RegisterDataNotify must not succeed when event has already registered.}
> +
> +################################################################################
> +Include IP6Config/Include/Ip6Config.inc.tcl
> +
> +
> +#
> +# Begin log ...
> +#
> +BeginLog
> +
> +#
> +# BeginScope
> +#
> +BeginScope _IP6CONFIG_REGISTERDATANOTIFY_CONF3
> +
> +#
> +# Parameter Definition
> +# R_ represents "Remote EFI Side Parameter"
> +# L_ represents "Local ENTS Side Parameter"
> +#
> +UINTN R_Status
> +UINTN R_Context
> +UINTN R_DoneEvent
> +UINTN R_Ip6ConfigDataSize
> +UINT32 R_Ip6ConfigDataType
> +EFI_IP6_CONFIG_INTERFACE_INFO R_Ip6ConfigInterfaceInfo
> +EFI_IP6_CONFIG_INTERFACE_ID R_Ip6ConfigInterfaceId
> +UINT32 R_Ip6ConfigPolicy
> +EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS R_Ip6ConfigDadTransmits
> +
> +#
> +# Check Point: Call Ip6Config->SetData to set manual policy
> +#
> +SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> +SetVar R_Ip6ConfigDataSize [Sizeof UINT32]
> +SetVar R_Ip6ConfigPolicy $IP6CP(Manual)
> +
> +SetVar R_Context 0
> +BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context,\
> + &@R_DoneEvent, &@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "BS.CreateEvent." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +#
> +# Check Point: Call Ip6Config->RegisterDataNotify with valid parameters
> +#
> +Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType, @R_DoneEvent ,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.RegisterDataNotify - Register notification event with valid parameters." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +#
> +# Check Point : Call RegisterDataNotify() with the same event (has been registered)
> +#
> +Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType, @R_DoneEvent ,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_ACCESS_DENIED]
> +RecordAssertion $assert $Ip6ConfigRegisterDataNotifyConf3AssertionGuid001 \
> + "Ip6Config.RegisterDataNotify - Register notification event with the event registered already." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_ACCESS_DENIED"
> +
> +
> +#
> +# Clean up
> +#
> +SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> +Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.UnregisterDataNotify - Unregister notification event for configuration." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +BS->CloseEvent {@R_DoneEvent,&@R_Status}
> +GetAck
> +
> +EndScope _IP6CONFIG_REGISTERDATANOTIFY_CONF3
> +
> EndLog
> \ No newline at end of file
> diff --git a/uefi-sct/EMS/Bin/TestCase/IP6Config/RegisterDataNotify.Func1.Case1.tcl b/uefi-sct/EMS/Bin/TestCase/IP6Config/RegisterDataNotify.Func1.Case1.tcl
> index 38be04c..b2b777c 100644
> --- a/uefi-sct/EMS/Bin/TestCase/IP6Config/RegisterDataNotify.Func1.Case1.tcl
> +++ b/uefi-sct/EMS/Bin/TestCase/IP6Config/RegisterDataNotify.Func1.Case1.tcl
> @@ -1,539 +1,539 @@
> -#
> -# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
> -# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
> -#
> -# This program and the accompanying materials
> -# are licensed and made available under the terms and conditions of the BSD License
> -# which accompanies this distribution. The full text of the license may be found at
> -# http://opensource.org/licenses/bsd-license.php
> -#
> -# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> -# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
> -#
> -################################################################################
> -CaseLevel FUNCTION
> -CaseAttribute AUTO
> -CaseVerboseLevel DEFAULT
> -set reportfile report.csv
> -
> -#
> -# test case Name, category, description, GUID...
> -#
> -CaseGuid 7D041B9B-4F68-434a-A0C6-63FDC415D078
> -CaseName RegisterDataNotify.Func1.Case1
> -CaseCategory IP6Config
> -CaseDescription {RegisterDataNotify must succeed with valid parameters when one event registered on one data type.}
> -
> -################################################################################
> -Include IP6Config/Include/Ip6Config.inc.tcl
> -
> -
> -#
> -# Begin log ...
> -#
> -BeginLog
> -
> -#
> -# BeginScope
> -#
> -BeginScope _IP6CONFIG_REGISTERDATANOTIFY_FUNC1_CASE1
> -
> -#
> -# Parameter Definition
> -# R_ represents "Remote EFI Side Parameter"
> -# L_ represents "Local ENTS Side Parameter"
> -#
> -UINTN R_Status
> -UINTN R_Context
> -UINTN R_DoneEvent
> -UINTN R_Context1
> -UINTN R_DoneEvent1
> -UINTN R_Context2
> -UINTN R_DoneEvent2
> -UINTN R_Ip6ConfigDataSize
> -UINT32 R_Ip6ConfigDataType
> -EFI_IP6_CONFIG_INTERFACE_INFO R_Ip6ConfigInterfaceInfo
> -EFI_IP6_CONFIG_INTERFACE_ID R_Ip6ConfigInterfaceId
> -UINT32 R_Ip6ConfigPolicy
> -EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS R_Ip6ConfigDadTransmits
> -
> -#
> -# Check Point: Call Ip6Config->SetData to set manual policy
> -#
> -SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> -SetVar R_Ip6ConfigDataSize [Sizeof UINT32]
> -SetVar R_Ip6ConfigPolicy $IP6CP(Manual)
> -
> -SetVar R_Context 0
> -BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context,\
> - &@R_DoneEvent, &@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "BS.CreateEvent." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.RegisterDataNotify - Register notification event for configuration." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_Status"
> -GetAck
> -GetVar R_Status
> -if { $R_Status == $EFI_SUCCESS } {
> - set assert pass
> - RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.SetData - Call SetData to set manual policy." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -} elseif { $R_Status == $EFI_NOT_READY } {
> - set i 0
> - set L_TimeOut 30
> - while { 1 > 0 } {
> - GetVar R_Context
> - if { $R_Context == 1 } {
> - break
> - } elseif { $i == $L_TimeOut } {
> - set assert fail
> - RecordAssertion $assert $GenericAssertionGuid \
> - "SetData failed.(event hasn't been signaled before TIMEOUT)." \
> - "TIMEOUT value is $L_TimeOut (sec), "
> - SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - EndScope _IP6CONFIG_REGISTERDATANOTIFY_FUNC1_CASE1
> - EndLog
> - return
> - }
> - incr i
> - Stall 1
> - }
> -} else {
> - set assert fail
> - RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.SetData - Call SetData to set manual policy." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> - SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - EndScope _IP6CONFIG_REGISTERDATANOTIFY_FUNC1_CASE1
> - EndLog
> - return
> -}
> -
> -Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.GetData - Call GetData to get policy value." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -GetVar R_Ip6ConfigPolicy
> -if { $R_Ip6ConfigPolicy == $IP6CP(Manual) } {
> - set assert pass
> -} else {
> - set assert fail
> -
> - RecordAssertion $assert $GenericAssertionGuid \
> - "Set manual policy succeeds(event is signaled correctly and data correct)."
> - SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - EndScope _IP6CONFIG_REGISTERDATANOTIFY_FUNC1_CASE1
> - EndLog
> - return
> -}
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Set manual policy succeeds(event is signaled correctly and data correct)."
> -
> -#
> -# Check Point: Call Ip6Config->SetData to set DadXmits 0
> -#
> -SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> -SetVar R_Ip6ConfigDataSize [Sizeof EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS]
> -SetVar R_Ip6ConfigDadTransmits.DupAddrDetectTransmits 0
> -
> -SetVar R_Context1 0
> -BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context1,\
> - &@R_DoneEvent1, &@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "BS.CreateEvent." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.RegisterDataNotify - Register notification event for configuration." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigDadTransmits,&@R_Status"
> -GetAck
> -GetVar R_Status
> -if { $R_Status == $EFI_SUCCESS } {
> - set assert pass
> - RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.SetData - Call SetData to set DadXmits 0." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -} elseif { $R_Status == $EFI_NOT_READY } {
> - set i 0
> - set L_TimeOut 30
> - while { 1 > 0 } {
> - GetVar R_Context1
> - if { $R_Context1 == 1 } {
> - break
> - } elseif { $i == $L_TimeOut } {
> - set assert fail
> - RecordAssertion $assert $GenericAssertionGuid \
> - "SetData failed.(event hasn't been signaled before TIMEOUT)." \
> - "TIMEOUT value is $L_TimeOut (sec), "
> - SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> - GetAck
> - EndScope _IP6CONFIG_REGISTERDATANOTIFY_FUNC1_CASE1
> - EndLog
> - return
> - }
> - incr i
> - Stall 1
> - }
> -} else {
> - set assert fail
> - RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.SetData - Call SetData to set DadXmits 0." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> - SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> - GetAck
> - EndScope _IP6CONFIG_REGISTERDATANOTIFY_FUNC1_CASE1
> - EndLog
> - return
> -}
> -
> -Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigDadTransmits,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.GetData - Call GetData to get DadXmits value." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -GetVar R_Ip6ConfigDadTransmits.DupAddrDetectTransmits
> -if { ${R_Ip6ConfigDadTransmits.DupAddrDetectTransmits} == 0 } {
> - set assert pass
> -} else {
> - set assert fail
> -
> - RecordAssertion $assert $GenericAssertionGuid \
> - "Set DadXmits succeeds(event is signaled correctly and data correct)."
> - SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> - GetAck
> - EndScope _IP6CONFIG_REGISTERDATANOTIFY_FUNC1_CASE1
> - EndLog
> - return
> -}
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Set DadXmits succeeds(event is signaled correctly and data correct)."
> -
> -#
> -# Check Point : Set Manual Address with valid parameter
> -#
> -EFI_IP6_CONFIG_MANUAL_ADDRESS R_Temp_Ip6ConfigManualAddress
> -
> -set L_ManualListLen 1
> -EFI_IP6_CONFIG_MANUAL_ADDRESS R_Ip6ConfigManualAddress
> -set L_UnitLen [Sizeof EFI_IP6_CONFIG_MANUAL_ADDRESS]
> -set L_ListLen [expr {$L_UnitLen * $L_ManualListLen}]
> -SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
> -SetVar R_Ip6ConfigDataSize $L_ListLen
> -SetVar R_Temp_Ip6ConfigManualAddress.IsAnycast FALSE
> -SetVar R_Temp_Ip6ConfigManualAddress.PrefixLength 64
> -SetIpv6Address R_Temp_Ip6ConfigManualAddress.Address "2002::5000"
> -SetVar R_Ip6ConfigManualAddress @R_Temp_Ip6ConfigManualAddress
> -#
> -# Register Event for Manual Address
> -#
> -SetVar R_Context2 0
> -BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context2,\
> - &@R_DoneEvent2, &@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "BS.CreateEvent." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent2,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $Ip6ConfigRegisterDataNotifyFunc1AssertionGuid001 \
> - "Ip6Config.RegisterDataNotify - Register notification event for configuration." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigManualAddress,&@R_Status"
> -GetAck
> -GetVar R_Status
> -if { $R_Status == $EFI_SUCCESS } {
> - set assert pass
> - RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.SetData - Call SetData to set manual address." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -} elseif { $R_Status == $EFI_NOT_READY } {
> - set i 0
> - set L_TimeOut 30
> - while { 1 > 0 } {
> - GetVar R_Context2
> - if { $R_Context2 == 1 } {
> - break
> - } elseif { $i == $L_TimeOut } {
> - set assert fail
> - RecordAssertion $assert $GenericAssertionGuid \
> - "SetData failed.(event hasn't been signaled before TIMEOUT)." \
> - "TIMEOUT value is $L_TimeOut (sec), "
> - SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> - GetAck
> - SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent2,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent2,&@R_Status}
> - GetAck
> - EndScope _IP6CONFIG_REGISTERDATANOTIFY_FUNC1_CASE1
> - EndLog
> - return
> - }
> - incr i
> - Stall 1
> - }
> -} else {
> - set assert fail
> - RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.SetData - Call SetData to set manual address." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> - SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> - GetAck
> - SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent2,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent2,&@R_Status}
> - GetAck
> - EndScope _IP6CONFIG_REGISTERDATANOTIFY_FUNC1_CASE1
> - EndLog
> - return
> -}
> -
> -#
> -# Check Events for registered datatype
> -#
> -GetVar R_Context2
> -if { $R_Context2 == 1 } {
> - set assert pass
> -} else {
> - set assert fail
> -}
> -RecordAssertion $assert $Ip6ConfigRegisterDataNotifyFunc1AssertionGuid002 \
> - "Ip6Config.RegisterDataNotify - Registered event is signaled."
> -
> -#
> -# GetData to verfiy the data setting
> -#
> -Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigManualAddress,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.GetData - Call GetData to get manual address." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -GetVar R_Ip6ConfigManualAddress.IsAnycast
> -if { ${R_Ip6ConfigManualAddress.IsAnycast} == FALSE } {
> - set assert pass
> -} else {
> - set assert fail
> -}
> -GetVar R_Ip6ConfigManualAddress.PrefixLength
> -if { ${R_Ip6ConfigManualAddress.PrefixLength} == 64 } {
> - set assert pass
> -} else {
> - set assert fail
> -}
> -GetVar R_Ip6ConfigManualAddress.Address
> -set L_ManualAddress "2002:0000:0000:0000:0000:0000:0000:5000"
> -set L_RemoteAddress [ GetIpv6Address {R_Ip6ConfigManualAddress.Address} ]
> -if { [ string compare $L_RemoteAddress $L_ManualAddress ] == 0 } {
> - set assert pass
> -} else {
> - set assert fail
> -}
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Set ManualAddress succeeds(event is signaled correctly and data correct)."
> -
> -#
> -# Set automatic policy (this will clean up all address information configured)
> -#
> -SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> -SetVar R_Ip6ConfigDataSize [Sizeof UINT32]
> -SetVar R_Ip6ConfigPolicy $IP6CP(Automatic)
> -
> -SetVar R_Context 0
> -
> -Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_Status"
> -GetAck
> -GetVar R_Status
> -if { $R_Status == $EFI_SUCCESS } {
> - set assert pass
> -} elseif { $R_Status == $EFI_NOT_READY } {
> - set i 0
> - set L_TimeOut 30
> - set assert pass
> - while { 1 > 0 } {
> - GetVar R_Context
> - if { $R_Context == 1 } {
> - break
> - } elseif { $i == $L_TimeOut } {
> - set assert fail
> -
> - SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> - GetAck
> - SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent2,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent2,&@R_Status}
> - GetAck
> -
> - EndScope _IP6CONFIG_REGISTERDATANOTIFY_FUNC1_CASE1
> - EndLog
> - return
> - }
> - incr i
> - Stall 1
> - }
> -} else {
> - set assert fail
> -
> - SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> - GetAck
> - SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent2,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent2,&@R_Status}
> - GetAck
> -
> - EndScope _IP6CONFIG_REGISTERDATANOTIFY_FUNC1_CASE1
> - EndLog
> - return
> -}
> -
> -Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_Status"
> -GetAck
> -GetVar R_Ip6ConfigPolicy
> -if { $R_Ip6ConfigPolicy == $IP6CP(Automatic) } {
> - set assert pass
> -} else {
> - set assert fail
> -}
> -
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.SetData - Set automatic policy to clean up the former configuration." \
> - "TimeUsed - $i, TimeOut Value- $L_TimeOut"
> -
> -#
> -# Clean up
> -#
> -SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> -Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.UnregisterDataNotify - Unregister notification event for configuration." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -BS->CloseEvent {@R_DoneEvent,&@R_Status}
> -GetAck
> -
> -SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> -Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.UnregisterDataNotify - Unregister notification event for configuration." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> -GetAck
> -
> -SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
> -Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent2,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.UnregisterDataNotify - Unregister notification event for configuration." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -BS->CloseEvent {@R_DoneEvent2,&@R_Status}
> -GetAck
> -
> -EndScope _IP6CONFIG_REGISTERDATANOTIFY_FUNC1_CASE1
> -
> +#
> +# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
> +# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
> +#
> +# This program and the accompanying materials
> +# are licensed and made available under the terms and conditions of the BSD License
> +# which accompanies this distribution. The full text of the license may be found at
> +# http://opensource.org/licenses/bsd-license.php
> +#
> +# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> +# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
> +#
> +################################################################################
> +CaseLevel FUNCTION
> +CaseAttribute AUTO
> +CaseVerboseLevel DEFAULT
> +set reportfile report.csv
> +
> +#
> +# test case Name, category, description, GUID...
> +#
> +CaseGuid 7D041B9B-4F68-434a-A0C6-63FDC415D078
> +CaseName RegisterDataNotify.Func1.Case1
> +CaseCategory IP6Config
> +CaseDescription {RegisterDataNotify must succeed with valid parameters when one event registered on one data type.}
> +
> +################################################################################
> +Include IP6Config/Include/Ip6Config.inc.tcl
> +
> +
> +#
> +# Begin log ...
> +#
> +BeginLog
> +
> +#
> +# BeginScope
> +#
> +BeginScope _IP6CONFIG_REGISTERDATANOTIFY_FUNC1_CASE1
> +
> +#
> +# Parameter Definition
> +# R_ represents "Remote EFI Side Parameter"
> +# L_ represents "Local ENTS Side Parameter"
> +#
> +UINTN R_Status
> +UINTN R_Context
> +UINTN R_DoneEvent
> +UINTN R_Context1
> +UINTN R_DoneEvent1
> +UINTN R_Context2
> +UINTN R_DoneEvent2
> +UINTN R_Ip6ConfigDataSize
> +UINT32 R_Ip6ConfigDataType
> +EFI_IP6_CONFIG_INTERFACE_INFO R_Ip6ConfigInterfaceInfo
> +EFI_IP6_CONFIG_INTERFACE_ID R_Ip6ConfigInterfaceId
> +UINT32 R_Ip6ConfigPolicy
> +EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS R_Ip6ConfigDadTransmits
> +
> +#
> +# Check Point: Call Ip6Config->SetData to set manual policy
> +#
> +SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> +SetVar R_Ip6ConfigDataSize [Sizeof UINT32]
> +SetVar R_Ip6ConfigPolicy $IP6CP(Manual)
> +
> +SetVar R_Context 0
> +BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context,\
> + &@R_DoneEvent, &@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "BS.CreateEvent." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.RegisterDataNotify - Register notification event for configuration." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_Status"
> +GetAck
> +GetVar R_Status
> +if { $R_Status == $EFI_SUCCESS } {
> + set assert pass
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.SetData - Call SetData to set manual policy." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +} elseif { $R_Status == $EFI_NOT_READY } {
> + set i 0
> + set L_TimeOut 30
> + while { 1 > 0 } {
> + GetVar R_Context
> + if { $R_Context == 1 } {
> + break
> + } elseif { $i == $L_TimeOut } {
> + set assert fail
> + RecordAssertion $assert $GenericAssertionGuid \
> + "SetData failed.(event hasn't been signaled before TIMEOUT)." \
> + "TIMEOUT value is $L_TimeOut (sec), "
> + SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_REGISTERDATANOTIFY_FUNC1_CASE1
> + EndLog
> + return
> + }
> + incr i
> + Stall 1
> + }
> +} else {
> + set assert fail
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.SetData - Call SetData to set manual policy." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> + SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_REGISTERDATANOTIFY_FUNC1_CASE1
> + EndLog
> + return
> +}
> +
> +Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.GetData - Call GetData to get policy value." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +GetVar R_Ip6ConfigPolicy
> +if { $R_Ip6ConfigPolicy == $IP6CP(Manual) } {
> + set assert pass
> +} else {
> + set assert fail
> +
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Set manual policy succeeds(event is signaled correctly and data correct)."
> + SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_REGISTERDATANOTIFY_FUNC1_CASE1
> + EndLog
> + return
> +}
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Set manual policy succeeds(event is signaled correctly and data correct)."
> +
> +#
> +# Check Point: Call Ip6Config->SetData to set DadXmits 0
> +#
> +SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> +SetVar R_Ip6ConfigDataSize [Sizeof EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS]
> +SetVar R_Ip6ConfigDadTransmits.DupAddrDetectTransmits 0
> +
> +SetVar R_Context1 0
> +BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context1,\
> + &@R_DoneEvent1, &@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "BS.CreateEvent." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.RegisterDataNotify - Register notification event for configuration." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigDadTransmits,&@R_Status"
> +GetAck
> +GetVar R_Status
> +if { $R_Status == $EFI_SUCCESS } {
> + set assert pass
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.SetData - Call SetData to set DadXmits 0." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +} elseif { $R_Status == $EFI_NOT_READY } {
> + set i 0
> + set L_TimeOut 30
> + while { 1 > 0 } {
> + GetVar R_Context1
> + if { $R_Context1 == 1 } {
> + break
> + } elseif { $i == $L_TimeOut } {
> + set assert fail
> + RecordAssertion $assert $GenericAssertionGuid \
> + "SetData failed.(event hasn't been signaled before TIMEOUT)." \
> + "TIMEOUT value is $L_TimeOut (sec), "
> + SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_REGISTERDATANOTIFY_FUNC1_CASE1
> + EndLog
> + return
> + }
> + incr i
> + Stall 1
> + }
> +} else {
> + set assert fail
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.SetData - Call SetData to set DadXmits 0." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> + SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_REGISTERDATANOTIFY_FUNC1_CASE1
> + EndLog
> + return
> +}
> +
> +Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigDadTransmits,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.GetData - Call GetData to get DadXmits value." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +GetVar R_Ip6ConfigDadTransmits.DupAddrDetectTransmits
> +if { ${R_Ip6ConfigDadTransmits.DupAddrDetectTransmits} == 0 } {
> + set assert pass
> +} else {
> + set assert fail
> +
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Set DadXmits succeeds(event is signaled correctly and data correct)."
> + SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_REGISTERDATANOTIFY_FUNC1_CASE1
> + EndLog
> + return
> +}
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Set DadXmits succeeds(event is signaled correctly and data correct)."
> +
> +#
> +# Check Point : Set Manual Address with valid parameter
> +#
> +EFI_IP6_CONFIG_MANUAL_ADDRESS R_Temp_Ip6ConfigManualAddress
> +
> +set L_ManualListLen 1
> +EFI_IP6_CONFIG_MANUAL_ADDRESS R_Ip6ConfigManualAddress
> +set L_UnitLen [Sizeof EFI_IP6_CONFIG_MANUAL_ADDRESS]
> +set L_ListLen [expr {$L_UnitLen * $L_ManualListLen}]
> +SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
> +SetVar R_Ip6ConfigDataSize $L_ListLen
> +SetVar R_Temp_Ip6ConfigManualAddress.IsAnycast FALSE
> +SetVar R_Temp_Ip6ConfigManualAddress.PrefixLength 64
> +SetIpv6Address R_Temp_Ip6ConfigManualAddress.Address "2002::5000"
> +SetVar R_Ip6ConfigManualAddress @R_Temp_Ip6ConfigManualAddress
> +#
> +# Register Event for Manual Address
> +#
> +SetVar R_Context2 0
> +BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context2,\
> + &@R_DoneEvent2, &@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "BS.CreateEvent." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent2,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $Ip6ConfigRegisterDataNotifyFunc1AssertionGuid001 \
> + "Ip6Config.RegisterDataNotify - Register notification event for configuration." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigManualAddress,&@R_Status"
> +GetAck
> +GetVar R_Status
> +if { $R_Status == $EFI_SUCCESS } {
> + set assert pass
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.SetData - Call SetData to set manual address." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +} elseif { $R_Status == $EFI_NOT_READY } {
> + set i 0
> + set L_TimeOut 30
> + while { 1 > 0 } {
> + GetVar R_Context2
> + if { $R_Context2 == 1 } {
> + break
> + } elseif { $i == $L_TimeOut } {
> + set assert fail
> + RecordAssertion $assert $GenericAssertionGuid \
> + "SetData failed.(event hasn't been signaled before TIMEOUT)." \
> + "TIMEOUT value is $L_TimeOut (sec), "
> + SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> + GetAck
> + SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent2,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent2,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_REGISTERDATANOTIFY_FUNC1_CASE1
> + EndLog
> + return
> + }
> + incr i
> + Stall 1
> + }
> +} else {
> + set assert fail
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.SetData - Call SetData to set manual address." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> + SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> + GetAck
> + SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent2,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent2,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_REGISTERDATANOTIFY_FUNC1_CASE1
> + EndLog
> + return
> +}
> +
> +#
> +# Check Events for registered datatype
> +#
> +GetVar R_Context2
> +if { $R_Context2 == 1 } {
> + set assert pass
> +} else {
> + set assert fail
> +}
> +RecordAssertion $assert $Ip6ConfigRegisterDataNotifyFunc1AssertionGuid002 \
> + "Ip6Config.RegisterDataNotify - Registered event is signaled."
> +
> +#
> +# GetData to verfiy the data setting
> +#
> +Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigManualAddress,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.GetData - Call GetData to get manual address." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +GetVar R_Ip6ConfigManualAddress.IsAnycast
> +if { ${R_Ip6ConfigManualAddress.IsAnycast} == FALSE } {
> + set assert pass
> +} else {
> + set assert fail
> +}
> +GetVar R_Ip6ConfigManualAddress.PrefixLength
> +if { ${R_Ip6ConfigManualAddress.PrefixLength} == 64 } {
> + set assert pass
> +} else {
> + set assert fail
> +}
> +GetVar R_Ip6ConfigManualAddress.Address
> +set L_ManualAddress "2002:0000:0000:0000:0000:0000:0000:5000"
> +set L_RemoteAddress [ GetIpv6Address {R_Ip6ConfigManualAddress.Address} ]
> +if { [ string compare $L_RemoteAddress $L_ManualAddress ] == 0 } {
> + set assert pass
> +} else {
> + set assert fail
> +}
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Set ManualAddress succeeds(event is signaled correctly and data correct)."
> +
> +#
> +# Set automatic policy (this will clean up all address information configured)
> +#
> +SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> +SetVar R_Ip6ConfigDataSize [Sizeof UINT32]
> +SetVar R_Ip6ConfigPolicy $IP6CP(Automatic)
> +
> +SetVar R_Context 0
> +
> +Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_Status"
> +GetAck
> +GetVar R_Status
> +if { $R_Status == $EFI_SUCCESS } {
> + set assert pass
> +} elseif { $R_Status == $EFI_NOT_READY } {
> + set i 0
> + set L_TimeOut 30
> + set assert pass
> + while { 1 > 0 } {
> + GetVar R_Context
> + if { $R_Context == 1 } {
> + break
> + } elseif { $i == $L_TimeOut } {
> + set assert fail
> +
> + SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> + GetAck
> + SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent2,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent2,&@R_Status}
> + GetAck
> +
> + EndScope _IP6CONFIG_REGISTERDATANOTIFY_FUNC1_CASE1
> + EndLog
> + return
> + }
> + incr i
> + Stall 1
> + }
> +} else {
> + set assert fail
> +
> + SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> + GetAck
> + SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent2,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent2,&@R_Status}
> + GetAck
> +
> + EndScope _IP6CONFIG_REGISTERDATANOTIFY_FUNC1_CASE1
> + EndLog
> + return
> +}
> +
> +Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_Status"
> +GetAck
> +GetVar R_Ip6ConfigPolicy
> +if { $R_Ip6ConfigPolicy == $IP6CP(Automatic) } {
> + set assert pass
> +} else {
> + set assert fail
> +}
> +
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.SetData - Set automatic policy to clean up the former configuration." \
> + "TimeUsed - $i, TimeOut Value- $L_TimeOut"
> +
> +#
> +# Clean up
> +#
> +SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> +Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.UnregisterDataNotify - Unregister notification event for configuration." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +BS->CloseEvent {@R_DoneEvent,&@R_Status}
> +GetAck
> +
> +SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> +Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.UnregisterDataNotify - Unregister notification event for configuration." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> +GetAck
> +
> +SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
> +Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent2,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.UnregisterDataNotify - Unregister notification event for configuration." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +BS->CloseEvent {@R_DoneEvent2,&@R_Status}
> +GetAck
> +
> +EndScope _IP6CONFIG_REGISTERDATANOTIFY_FUNC1_CASE1
> +
> EndLog
> \ No newline at end of file
> diff --git a/uefi-sct/EMS/Bin/TestCase/IP6Config/RegisterDataNotify.Func1.Case2.tcl b/uefi-sct/EMS/Bin/TestCase/IP6Config/RegisterDataNotify.Func1.Case2.tcl
> index bd52067..6f7e51f 100644
> --- a/uefi-sct/EMS/Bin/TestCase/IP6Config/RegisterDataNotify.Func1.Case2.tcl
> +++ b/uefi-sct/EMS/Bin/TestCase/IP6Config/RegisterDataNotify.Func1.Case2.tcl
> @@ -1,266 +1,266 @@
> -#
> -# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
> -# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
> -#
> -# This program and the accompanying materials
> -# are licensed and made available under the terms and conditions of the BSD License
> -# which accompanies this distribution. The full text of the license may be found at
> -# http://opensource.org/licenses/bsd-license.php
> -#
> -# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> -# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
> -#
> -################################################################################
> -CaseLevel FUNCTION
> -CaseAttribute AUTO
> -CaseVerboseLevel DEFAULT
> -set reportfile report.csv
> -
> -#
> -# test case Name, category, description, GUID...
> -#
> -CaseGuid 886AE98A-5D43-47b4-A339-85FB089F21FA
> -CaseName RegisterDataNotify.Func1.Case2
> -CaseCategory IP6Config
> -CaseDescription {RegisterDataNotify must succeed with valid parameters when one event registered on two data types.}
> -
> -################################################################################
> -Include IP6Config/Include/Ip6Config.inc.tcl
> -
> -
> -#
> -# Begin log ...
> -#
> -BeginLog
> -
> -#
> -# BeginScope
> -#
> -BeginScope _IP6CONFIG_REGISTERDATANOTIFY_FUNC1_CASE2
> -
> -#
> -# Parameter Definition
> -# R_ represents "Remote EFI Side Parameter"
> -# L_ represents "Local ENTS Side Parameter"
> -#
> -UINTN R_Status
> -UINTN R_Context
> -UINTN R_DoneEvent
> -UINTN R_Ip6ConfigDataSize
> -UINT32 R_Ip6ConfigDataType
> -EFI_IP6_CONFIG_INTERFACE_INFO R_Ip6ConfigInterfaceInfo
> -EFI_IP6_CONFIG_INTERFACE_ID R_Ip6ConfigInterfaceId
> -UINT32 R_Ip6ConfigPolicy
> -EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS R_Ip6ConfigDadTransmits
> -
> -#
> -# Check Point: Create Event and register it with data type [Policy] and [DadXmits]
> -#
> -SetVar R_Context 0
> -BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context,\
> - &@R_DoneEvent, &@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "BS.CreateEvent." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> -SetVar R_Ip6ConfigDataSize [Sizeof UINT32]
> -SetVar R_Ip6ConfigPolicy $IP6CP(Manual)
> -
> -Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $Ip6ConfigRegisterDataNotifyFunc1AssertionGuid003 \
> - "Ip6Config.RegisterDataNotify - Register notification event for configuration." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> -SetVar R_Ip6ConfigDataSize [Sizeof EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS]
> -SetVar R_Ip6ConfigDadTransmits.DupAddrDetectTransmits 3
> -
> -Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $Ip6ConfigRegisterDataNotifyFunc1AssertionGuid004 \
> - "Ip6Config.RegisterDataNotify - Register notification event for configuration." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -#
> -# Check Point: Call Ip6Cofnig->SetData to set [Policy] and check whether the event is signaled.
> -#
> -SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> -SetVar R_Ip6ConfigDataSize [Sizeof UINT32]
> -SetVar R_Ip6ConfigPolicy $IP6CP(Manual)
> -
> -GetVar R_Context
> -set L_Context1 $R_Context
> -set L_Context2 [expr { $L_Context1 + 1 }]
> -
> -Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_Status"
> -GetAck
> -GetVar R_Status
> -
> -if { $R_Status == $EFI_SUCCESS } {
> - set assert pass
> - RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.SetData - Call SetData to set manual policy." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -} elseif { $R_Status == $EFI_NOT_READY } {
> - set i 0
> - set L_TimeOut 30
> - while { 1 > 0 } {
> - GetVar R_Context
> - if { $R_Context == $L_Context2 } {
> - break
> - } elseif { $i == $L_TimeOut } {
> - set assert fail
> - RecordAssertion $assert $GenericAssertionGuid \
> - "SetData failed.(event hasn't been signaled before TIMEOUT)." \
> - "TIMEOUT value is $L_TimeOut (sec), "
> - SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - EndScope _IP6CONFIG_REGISTERDATANOTIFY_FUNC1_CASE2
> - EndLog
> - return
> - }
> - incr i
> - Stall 1
> - }
> -} else {
> - set assert fail
> - RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.SetData - Call SetData to set manual policy." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> - SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - EndScope _IP6CONFIG_REGISTERDATANOTIFY_FUNC1_CASE2
> - EndLog
> - return
> -}
> -
> -GetVar R_Context
> -if { $R_Context == $L_Context2 } {
> - set assert pass
> -} else {
> - set assert fail
> -}
> -
> -RecordAssertion $assert $Ip6ConfigRegisterDataNotifyFunc1AssertionGuid005 \
> - "Ip6Config.RegisterDataNotify - Event is signaled for DataType - Policy."
> -
> -#
> -# Check Point: Call Ip6Config->SetData to set [DadXmits] and check whether the event is signaled.
> -#
> -SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> -SetVar R_Ip6ConfigDataSize [Sizeof EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS]
> -SetVar R_Ip6ConfigDadTransmits.DupAddrDetectTransmits 3
> -
> -GetVar R_Context
> -set L_Context1 $R_Context
> -set L_Context2 [expr { $L_Context1 + 1 }]
> -
> -Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigDadTransmits,&@R_Status"
> -GetAck
> -GetVar R_Status
> -
> -if { $R_Status == $EFI_SUCCESS } {
> - set assert pass
> - RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.SetData - Call SetData to set DadXmits." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -} elseif { $R_Status == $EFI_NOT_READY } {
> - set i 0
> - set L_TimeOut 30
> - while { 1 > 0 } {
> - GetVar R_Context
> - if { $R_Context == $L_Context2 } {
> - break
> - } elseif { $i == $L_TimeOut } {
> - set assert fail
> - RecordAssertion $assert $GenericAssertionGuid \
> - "SetData failed.(event hasn't been signaled before TIMEOUT)." \
> - "TIMEOUT value is $L_TimeOut (sec), "
> -
> - SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - EndScope _IP6CONFIG_REGISTERDATANOTIFY_FUNC1_CASE2
> - EndLog
> - return
> - }
> - incr i
> - Stall 1
> - }
> -} else {
> - set assert fail
> - RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.SetData - Call SetData to set DadXmits." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> - SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - EndScope _IP6CONFIG_REGISTERDATANOTIFY_FUNC1_CASE2
> - EndLog
> - return
> -}
> -
> -GetVar R_Context
> -if { $R_Context == $L_Context2 } {
> - set assert pass
> -} else {
> - set assert fail
> -}
> -RecordAssertion $assert $Ip6ConfigRegisterDataNotifyFunc1AssertionGuid006 \
> - "Ip6Config.RegisterDataNotify - Event is signaled for DataType - DadXmits."
> -
> -#
> -# Clean up
> -#
> -SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> -Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.UnregisterDataNotify - Unregister notification event for configuration." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> -Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.UnregisterDataNotify - Unregister notification event for configuration." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -BS->CloseEvent {@R_DoneEvent,&@R_Status}
> -GetAck
> -
> -EndScope _IP6CONFIG_REGISTERDATANOTIFY_FUNC1_CASE2
> -
> +#
> +# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
> +# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
> +#
> +# This program and the accompanying materials
> +# are licensed and made available under the terms and conditions of the BSD License
> +# which accompanies this distribution. The full text of the license may be found at
> +# http://opensource.org/licenses/bsd-license.php
> +#
> +# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> +# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
> +#
> +################################################################################
> +CaseLevel FUNCTION
> +CaseAttribute AUTO
> +CaseVerboseLevel DEFAULT
> +set reportfile report.csv
> +
> +#
> +# test case Name, category, description, GUID...
> +#
> +CaseGuid 886AE98A-5D43-47b4-A339-85FB089F21FA
> +CaseName RegisterDataNotify.Func1.Case2
> +CaseCategory IP6Config
> +CaseDescription {RegisterDataNotify must succeed with valid parameters when one event registered on two data types.}
> +
> +################################################################################
> +Include IP6Config/Include/Ip6Config.inc.tcl
> +
> +
> +#
> +# Begin log ...
> +#
> +BeginLog
> +
> +#
> +# BeginScope
> +#
> +BeginScope _IP6CONFIG_REGISTERDATANOTIFY_FUNC1_CASE2
> +
> +#
> +# Parameter Definition
> +# R_ represents "Remote EFI Side Parameter"
> +# L_ represents "Local ENTS Side Parameter"
> +#
> +UINTN R_Status
> +UINTN R_Context
> +UINTN R_DoneEvent
> +UINTN R_Ip6ConfigDataSize
> +UINT32 R_Ip6ConfigDataType
> +EFI_IP6_CONFIG_INTERFACE_INFO R_Ip6ConfigInterfaceInfo
> +EFI_IP6_CONFIG_INTERFACE_ID R_Ip6ConfigInterfaceId
> +UINT32 R_Ip6ConfigPolicy
> +EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS R_Ip6ConfigDadTransmits
> +
> +#
> +# Check Point: Create Event and register it with data type [Policy] and [DadXmits]
> +#
> +SetVar R_Context 0
> +BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context,\
> + &@R_DoneEvent, &@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "BS.CreateEvent." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> +SetVar R_Ip6ConfigDataSize [Sizeof UINT32]
> +SetVar R_Ip6ConfigPolicy $IP6CP(Manual)
> +
> +Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $Ip6ConfigRegisterDataNotifyFunc1AssertionGuid003 \
> + "Ip6Config.RegisterDataNotify - Register notification event for configuration." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> +SetVar R_Ip6ConfigDataSize [Sizeof EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS]
> +SetVar R_Ip6ConfigDadTransmits.DupAddrDetectTransmits 3
> +
> +Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $Ip6ConfigRegisterDataNotifyFunc1AssertionGuid004 \
> + "Ip6Config.RegisterDataNotify - Register notification event for configuration." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +#
> +# Check Point: Call Ip6Cofnig->SetData to set [Policy] and check whether the event is signaled.
> +#
> +SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> +SetVar R_Ip6ConfigDataSize [Sizeof UINT32]
> +SetVar R_Ip6ConfigPolicy $IP6CP(Manual)
> +
> +GetVar R_Context
> +set L_Context1 $R_Context
> +set L_Context2 [expr { $L_Context1 + 1 }]
> +
> +Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_Status"
> +GetAck
> +GetVar R_Status
> +
> +if { $R_Status == $EFI_SUCCESS } {
> + set assert pass
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.SetData - Call SetData to set manual policy." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +} elseif { $R_Status == $EFI_NOT_READY } {
> + set i 0
> + set L_TimeOut 30
> + while { 1 > 0 } {
> + GetVar R_Context
> + if { $R_Context == $L_Context2 } {
> + break
> + } elseif { $i == $L_TimeOut } {
> + set assert fail
> + RecordAssertion $assert $GenericAssertionGuid \
> + "SetData failed.(event hasn't been signaled before TIMEOUT)." \
> + "TIMEOUT value is $L_TimeOut (sec), "
> + SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_REGISTERDATANOTIFY_FUNC1_CASE2
> + EndLog
> + return
> + }
> + incr i
> + Stall 1
> + }
> +} else {
> + set assert fail
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.SetData - Call SetData to set manual policy." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> + SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_REGISTERDATANOTIFY_FUNC1_CASE2
> + EndLog
> + return
> +}
> +
> +GetVar R_Context
> +if { $R_Context == $L_Context2 } {
> + set assert pass
> +} else {
> + set assert fail
> +}
> +
> +RecordAssertion $assert $Ip6ConfigRegisterDataNotifyFunc1AssertionGuid005 \
> + "Ip6Config.RegisterDataNotify - Event is signaled for DataType - Policy."
> +
> +#
> +# Check Point: Call Ip6Config->SetData to set [DadXmits] and check whether the event is signaled.
> +#
> +SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> +SetVar R_Ip6ConfigDataSize [Sizeof EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS]
> +SetVar R_Ip6ConfigDadTransmits.DupAddrDetectTransmits 3
> +
> +GetVar R_Context
> +set L_Context1 $R_Context
> +set L_Context2 [expr { $L_Context1 + 1 }]
> +
> +Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigDadTransmits,&@R_Status"
> +GetAck
> +GetVar R_Status
> +
> +if { $R_Status == $EFI_SUCCESS } {
> + set assert pass
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.SetData - Call SetData to set DadXmits." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +} elseif { $R_Status == $EFI_NOT_READY } {
> + set i 0
> + set L_TimeOut 30
> + while { 1 > 0 } {
> + GetVar R_Context
> + if { $R_Context == $L_Context2 } {
> + break
> + } elseif { $i == $L_TimeOut } {
> + set assert fail
> + RecordAssertion $assert $GenericAssertionGuid \
> + "SetData failed.(event hasn't been signaled before TIMEOUT)." \
> + "TIMEOUT value is $L_TimeOut (sec), "
> +
> + SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_REGISTERDATANOTIFY_FUNC1_CASE2
> + EndLog
> + return
> + }
> + incr i
> + Stall 1
> + }
> +} else {
> + set assert fail
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.SetData - Call SetData to set DadXmits." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> + SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_REGISTERDATANOTIFY_FUNC1_CASE2
> + EndLog
> + return
> +}
> +
> +GetVar R_Context
> +if { $R_Context == $L_Context2 } {
> + set assert pass
> +} else {
> + set assert fail
> +}
> +RecordAssertion $assert $Ip6ConfigRegisterDataNotifyFunc1AssertionGuid006 \
> + "Ip6Config.RegisterDataNotify - Event is signaled for DataType - DadXmits."
> +
> +#
> +# Clean up
> +#
> +SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> +Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.UnregisterDataNotify - Unregister notification event for configuration." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> +Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.UnregisterDataNotify - Unregister notification event for configuration." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +BS->CloseEvent {@R_DoneEvent,&@R_Status}
> +GetAck
> +
> +EndScope _IP6CONFIG_REGISTERDATANOTIFY_FUNC1_CASE2
> +
> EndLog
> \ No newline at end of file
> diff --git a/uefi-sct/EMS/Bin/TestCase/IP6Config/SetData.Conf1.Case1.tcl b/uefi-sct/EMS/Bin/TestCase/IP6Config/SetData.Conf1.Case1.tcl
> index 2213ec9..8c33521 100644
> --- a/uefi-sct/EMS/Bin/TestCase/IP6Config/SetData.Conf1.Case1.tcl
> +++ b/uefi-sct/EMS/Bin/TestCase/IP6Config/SetData.Conf1.Case1.tcl
> @@ -1,72 +1,72 @@
> -#
> -# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
> -# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
> -#
> -# This program and the accompanying materials
> -# are licensed and made available under the terms and conditions of the BSD License
> -# which accompanies this distribution. The full text of the license may be found at
> -# http://opensource.org/licenses/bsd-license.php
> -#
> -# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> -# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
> -#
> -################################################################################
> -CaseLevel CONFORMANCE
> -CaseAttribute AUTO
> -CaseVerboseLevel DEFAULT
> -set reportfile report.csv
> -
> -#
> -# test case Name, category, description, GUID...
> -#
> -CaseGuid EF4CCB73-577C-4b8c-96E3-91517F0B7056
> -CaseName SetData.Conf1.Case1
> -CaseCategory IP6Config
> -CaseDescription {SetData must not succeed when data is NULL.}
> -
> -################################################################################
> -Include IP6Config/Include/Ip6Config.inc.tcl
> -
> -
> -#
> -# Begin log ...
> -#
> -BeginLog
> -
> -#
> -# BeginScope
> -#
> -BeginScope _IP6CONFIG_SETDATA_CONF1
> -
> -#
> -# Parameter Definition
> -# R_ represents "Remote EFI Side Parameter"
> -# L_ represents "Local ENTS Side Parameter"
> -#
> -UINTN R_Status
> -UINTN R_Context
> -UINTN R_DoneEvent
> -UINTN R_Ip6ConfigDataSize
> -UINT32 R_Ip6ConfigDataType
> -EFI_IP6_CONFIG_INTERFACE_INFO R_Ip6ConfigInterfaceInfo
> -EFI_IP6_CONFIG_INTERFACE_ID R_Ip6ConfigInterfaceId
> -UINT32 R_Ip6ConfigPolicy
> -EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS R_Ip6ConfigDadTransmits
> -EFI_IP6_CONFIG_MANUAL_ADDRESS R_Ip6ConfigManualAddress
> -
> -#
> -# Check Point: Call Ip6Config->SetData with data is NULL.
> -#
> -SetVar R_Ip6ConfigDataType $IP6CDT(InterfaceInfo)
> -SetVar R_Ip6ConfigDataSize [Sizeof EFI_IP6_CONFIG_INTERFACE_INFO]
> -
> -Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,NULL,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_INVALID_PARAMETER]
> -RecordAssertion $assert $Ip6ConfigSetDataConf1AssertionGuid001 \
> - "Ip6Config.SetData - Call SetData with Data NULL." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_INVALID_PARAMETER"
> -
> -EndScope _IP6CONFIG_SETDATA_CONF1
> -
> +#
> +# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
> +# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
> +#
> +# This program and the accompanying materials
> +# are licensed and made available under the terms and conditions of the BSD License
> +# which accompanies this distribution. The full text of the license may be found at
> +# http://opensource.org/licenses/bsd-license.php
> +#
> +# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> +# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
> +#
> +################################################################################
> +CaseLevel CONFORMANCE
> +CaseAttribute AUTO
> +CaseVerboseLevel DEFAULT
> +set reportfile report.csv
> +
> +#
> +# test case Name, category, description, GUID...
> +#
> +CaseGuid EF4CCB73-577C-4b8c-96E3-91517F0B7056
> +CaseName SetData.Conf1.Case1
> +CaseCategory IP6Config
> +CaseDescription {SetData must not succeed when data is NULL.}
> +
> +################################################################################
> +Include IP6Config/Include/Ip6Config.inc.tcl
> +
> +
> +#
> +# Begin log ...
> +#
> +BeginLog
> +
> +#
> +# BeginScope
> +#
> +BeginScope _IP6CONFIG_SETDATA_CONF1
> +
> +#
> +# Parameter Definition
> +# R_ represents "Remote EFI Side Parameter"
> +# L_ represents "Local ENTS Side Parameter"
> +#
> +UINTN R_Status
> +UINTN R_Context
> +UINTN R_DoneEvent
> +UINTN R_Ip6ConfigDataSize
> +UINT32 R_Ip6ConfigDataType
> +EFI_IP6_CONFIG_INTERFACE_INFO R_Ip6ConfigInterfaceInfo
> +EFI_IP6_CONFIG_INTERFACE_ID R_Ip6ConfigInterfaceId
> +UINT32 R_Ip6ConfigPolicy
> +EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS R_Ip6ConfigDadTransmits
> +EFI_IP6_CONFIG_MANUAL_ADDRESS R_Ip6ConfigManualAddress
> +
> +#
> +# Check Point: Call Ip6Config->SetData with data is NULL.
> +#
> +SetVar R_Ip6ConfigDataType $IP6CDT(InterfaceInfo)
> +SetVar R_Ip6ConfigDataSize [Sizeof EFI_IP6_CONFIG_INTERFACE_INFO]
> +
> +Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,NULL,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_INVALID_PARAMETER]
> +RecordAssertion $assert $Ip6ConfigSetDataConf1AssertionGuid001 \
> + "Ip6Config.SetData - Call SetData with Data NULL." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_INVALID_PARAMETER"
> +
> +EndScope _IP6CONFIG_SETDATA_CONF1
> +
> EndLog
> \ No newline at end of file
> diff --git a/uefi-sct/EMS/Bin/TestCase/IP6Config/SetData.Conf2.Case1.tcl b/uefi-sct/EMS/Bin/TestCase/IP6Config/SetData.Conf2.Case1.tcl
> index f14a5bb..bbf7830 100644
> --- a/uefi-sct/EMS/Bin/TestCase/IP6Config/SetData.Conf2.Case1.tcl
> +++ b/uefi-sct/EMS/Bin/TestCase/IP6Config/SetData.Conf2.Case1.tcl
> @@ -1,299 +1,299 @@
> -#
> -# Copyright 2006 - 2017 Unified EFI, Inc.<BR>
> -# Copyright (c) 2010 - 2017, Intel Corporation. All rights reserved.<BR>
> -#
> -# This program and the accompanying materials
> -# are licensed and made available under the terms and conditions of the BSD License
> -# which accompanies this distribution. The full text of the license may be found at
> -# http://opensource.org/licenses/bsd-license.php
> -#
> -# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> -# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
> -#
> -################################################################################
> -CaseLevel CONFORMANCE
> -CaseAttribute AUTO
> -CaseVerboseLevel DEFAULT
> -set reportfile report.csv
> -
> -#
> -# test case Name, category, description, GUID...
> -#
> -CaseGuid A9BBCC37-3ED5-4c11-B6B6-BE52A1131568
> -CaseName SetData.Conf2.Case1
> -CaseCategory IP6Config
> -CaseDescription {SetData must not succeed when one or more fields in data is invalid.}
> -
> -################################################################################
> -Include IP6Config/Include/Ip6Config.inc.tcl
> -
> -
> -#
> -# Begin log ...
> -#
> -BeginLog
> -
> -#
> -# BeginScope
> -#
> -BeginScope _IP6CONFIG_SETDATA_CONF2
> -
> -#
> -# Parameter Definition
> -# R_ represents "Remote EFI Side Parameter"
> -# L_ represents "Local ENTS Side Parameter"
> -#
> -UINTN R_Status
> -UINTN R_Context
> -UINTN R_DoneEvent
> -UINTN R_Ip6ConfigDataSize
> -UINT32 R_Ip6ConfigDataType
> -EFI_IP6_CONFIG_INTERFACE_INFO R_Ip6ConfigInterfaceInfo
> -EFI_IP6_CONFIG_INTERFACE_ID R_Ip6ConfigInterfaceId
> -UINT32 R_Ip6ConfigPolicy
> -EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS R_Ip6ConfigDadTransmits
> -
> -#
> -# Check Point: Call Ip6Config->SetData to set manual policy
> -#
> -SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> -SetVar R_Ip6ConfigDataSize [Sizeof UINT32]
> -SetVar R_Ip6ConfigPolicy $IP6CP(Manual)
> -
> -SetVar R_Context 0
> -BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context,\
> - &@R_DoneEvent, &@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "BS.CreateEvent." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.RegisterDataNotify - Register notification event for configuration." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_Status"
> -GetAck
> -GetVar R_Status
> -if { $R_Status == $EFI_SUCCESS } {
> - set assert pass
> - RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.SetData - Call SetData to set manual policy." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -} elseif { $R_Status == $EFI_NOT_READY } {
> - set i 0
> - set L_TimeOut 30
> - while { 1 > 0 } {
> - GetVar R_Context
> - if { $R_Context == 1 } {
> - break
> - } elseif { $i == $L_TimeOut } {
> - set assert fail
> - RecordAssertion $assert $GenericAssertionGuid \
> - "SetData failed.(event hasn't been signaled before TIMEOUT)." \
> - "TIMEOUT value is $L_TimeOut (sec), "
> - SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - EndScope _IP6CONFIG_SETDATA_CONF2
> - EndLog
> - return
> - }
> - incr i
> - Stall 1
> - }
> -} else {
> - set assert fail
> - RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.SetData - Call SetData to set manual policy." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> - SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - EndScope _IP6CONFIG_SETDATA_CONF2
> - EndLog
> - return
> -}
> -
> -Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.GetData - Call GetData to get policy value." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -GetVar R_Ip6ConfigPolicy
> -if { $R_Ip6ConfigPolicy == $IP6CP(Manual) } {
> - set assert pass
> -} else {
> - set assert fail
> -
> - RecordAssertion $assert $GenericAssertionGuid \
> - "Set manual policy succeeds(event is signaled correctly and data correct)."
> - SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - EndScope _IP6CONFIG_SETDATA_CONF2
> - EndLog
> - return
> -}
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Set manual policy succeeds(event is signaled correctly and data correct)."
> -
> -#
> -# Check Point : Set Manual Address with "::"
> -#
> -EFI_IP6_CONFIG_MANUAL_ADDRESS R_Temp_Ip6ConfigManualAddress
> -
> -set L_ManualListLen 1
> -EFI_IP6_CONFIG_MANUAL_ADDRESS R_Ip6ConfigManualAddress
> -set L_UnitLen [Sizeof EFI_IP6_CONFIG_MANUAL_ADDRESS]
> -set L_ListLen [expr {$L_UnitLen * $L_ManualListLen}]
> -SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
> -SetVar R_Ip6ConfigDataSize $L_ListLen
> -SetVar R_Temp_Ip6ConfigManualAddress.IsAnycast FALSE
> -SetVar R_Temp_Ip6ConfigManualAddress.PrefixLength 64
> -SetIpv6Address R_Temp_Ip6ConfigManualAddress.Address "::"
> -SetVar R_Ip6ConfigManualAddress @R_Temp_Ip6ConfigManualAddress
> -
> -Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigManualAddress,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_INVALID_PARAMETER]
> -RecordAssertion $assert $Ip6ConfigSetDataConf2AssertionGuid001 \
> - "Ip6Config.SetData - Call SetData to set manual address (Not Unicast or Linklocal)." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_INVALID_PARAMETER"
> -
> -DelVar R_Ip6ConfigManualAddress
> -
> -#
> -# Check Point : Set Manual Address with duplication of list entries
> -#
> -set L_ManualListLen 3
> -EFI_IP6_CONFIG_MANUAL_ADDRESS R_Ip6ConfigManualAddress($L_ManualListLen)
> -set L_UnitLen [Sizeof EFI_IP6_CONFIG_MANUAL_ADDRESS]
> -set L_ListLen [expr {$L_UnitLen * $L_ManualListLen}]
> -SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
> -SetVar R_Ip6ConfigDataSize $L_ListLen
> -
> -SetVar R_Temp_Ip6ConfigManualAddress.IsAnycast FALSE
> -SetVar R_Temp_Ip6ConfigManualAddress.PrefixLength 64
> -SetIpv6Address R_Temp_Ip6ConfigManualAddress.Address "2002::5000"
> -SetVar R_Ip6ConfigManualAddress(0) @R_Temp_Ip6ConfigManualAddress
> -
> -SetVar R_Temp_Ip6ConfigManualAddress.IsAnycast FALSE
> -SetVar R_Temp_Ip6ConfigManualAddress.PrefixLength 64
> -SetIpv6Address R_Temp_Ip6ConfigManualAddress.Address "2002::5001"
> -SetVar R_Ip6ConfigManualAddress(1) @R_Temp_Ip6ConfigManualAddress
> -
> -SetVar R_Temp_Ip6ConfigManualAddress.IsAnycast FALSE
> -SetVar R_Temp_Ip6ConfigManualAddress.PrefixLength 64
> -SetIpv6Address R_Temp_Ip6ConfigManualAddress.Address "2002::5000"
> -SetVar R_Ip6ConfigManualAddress(2) @R_Temp_Ip6ConfigManualAddress
> -
> -Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigManualAddress,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_INVALID_PARAMETER]
> -RecordAssertion $assert $Ip6ConfigSetDataConf2AssertionGuid002 \
> - "Ip6Config.SetData - Call SetData to set manual address (duplication of list entries)." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_INVALID_PARAMETER"
> -
> -DelVar R_Ip6ConfigManualAddress
> -
> -#
> -# Check Points : Set Gateway with "ff02::1" (multicast address)
> -#
> -set L_GatewayListLen 1
> -EFI_IPv6_ADDRESS R_Temp_Ip6ConfigGateway
> -EFI_IPv6_ADDRESS R_Ip6ConfigGateway
> -set L_UnitLen [Sizeof EFI_IPv6_ADDRESS]
> -set L_ListLen [expr {$L_UnitLen * $L_GatewayListLen}]
> -SetVar R_Ip6ConfigDataType $IP6CDT(Gateway)
> -SetVar R_Ip6ConfigDataSize $L_ListLen
> -
> -SetIpv6Address R_Temp_Ip6ConfigGateway "ff02::1"
> -SetVar R_Ip6ConfigGateway @R_Temp_Ip6ConfigGateway
> -Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigGateway,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_INVALID_PARAMETER]
> -RecordAssertion $assert $Ip6ConfigSetDataConf2AssertionGuid003 \
> - "Ip6Config.SetData - Call SetData to set gateway with multicast address." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_INVALID_PARAMETER"
> -
> -DelVar R_Ip6ConfigGateway
> -
> -#
> -# Check Point : Set Gateway with duplication of list entries
> -#
> -set L_GatewayListLen 3
> -EFI_IPv6_ADDRESS R_Ip6ConfigGateway($L_GatewayListLen)
> -set L_UnitLen [Sizeof EFI_IPv6_ADDRESS]
> -set L_ListLen [expr {$L_UnitLen * $L_GatewayListLen}]
> -SetVar R_Ip6ConfigDataType $IP6CDT(Gateway)
> -SetVar R_Ip6ConfigDataSize $L_ListLen
> -
> -SetIpv6Address R_Temp_Ip6ConfigGateway "2002::5000"
> -SetVar R_Ip6ConfigGateway(0) @R_Temp_Ip6ConfigGateway
> -SetIpv6Address R_Temp_Ip6ConfigGateway "2002::5001"
> -SetVar R_Ip6ConfigGateway(1) @R_Temp_Ip6ConfigGateway
> -SetIpv6Address R_Temp_Ip6ConfigGateway "2002::5000"
> -SetVar R_Ip6ConfigGateway(2) @R_Temp_Ip6ConfigGateway
> -
> -Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigGateway,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_INVALID_PARAMETER]
> -RecordAssertion $assert $Ip6ConfigSetDataConf2AssertionGuid004 \
> - "Ip6Config.SetData - Call SetData to set gateway with duplication of list entries." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_INVALID_PARAMETER"
> -
> -DelVar R_Ip6ConfigGateway
> -
> -#
> -# Check Point : Set Dns Server with "ff02::1" (link local address)
> -#
> -set L_DnsServerListLen 1
> -EFI_IPv6_ADDRESS R_Temp_Ip6ConfigDnsServer
> -EFI_IPv6_ADDRESS R_Ip6ConfigDnsServer
> -set L_UnitLen [Sizeof EFI_IPv6_ADDRESS]
> -set L_ListLen [expr {$L_UnitLen * $L_DnsServerListLen}]
> -SetVar R_Ip6ConfigDataType $IP6CDT(DnsServer)
> -SetVar R_Ip6ConfigDataSize $L_ListLen
> -
> -SetIpv6Address R_Temp_Ip6ConfigDnsServer "ff02::1"
> -SetVar R_Ip6ConfigDnsServer @R_Temp_Ip6ConfigDnsServer
> -
> -Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigDnsServer,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_INVALID_PARAMETER]
> -RecordAssertion $assert $Ip6ConfigSetDataConf2AssertionGuid005 \
> - "Ip6Config.SetData - Call SetData to set dns server with multicast address." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_INVALID_PARAMETER"
> -
> -DelVar R_Ip6ConfigDnsServer
> -
> -#
> -# Clean up
> -#
> -SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> -Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.UnregisterDataNotify - Unregister notification event for configuration." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -BS->CloseEvent {@R_DoneEvent,&@R_Status}
> -GetAck
> -
> -EndScope _IP6CONFIG_SETDATA_CONF2
> -
> +#
> +# Copyright 2006 - 2017 Unified EFI, Inc.<BR>
> +# Copyright (c) 2010 - 2017, Intel Corporation. All rights reserved.<BR>
> +#
> +# This program and the accompanying materials
> +# are licensed and made available under the terms and conditions of the BSD License
> +# which accompanies this distribution. The full text of the license may be found at
> +# http://opensource.org/licenses/bsd-license.php
> +#
> +# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> +# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
> +#
> +################################################################################
> +CaseLevel CONFORMANCE
> +CaseAttribute AUTO
> +CaseVerboseLevel DEFAULT
> +set reportfile report.csv
> +
> +#
> +# test case Name, category, description, GUID...
> +#
> +CaseGuid A9BBCC37-3ED5-4c11-B6B6-BE52A1131568
> +CaseName SetData.Conf2.Case1
> +CaseCategory IP6Config
> +CaseDescription {SetData must not succeed when one or more fields in data is invalid.}
> +
> +################################################################################
> +Include IP6Config/Include/Ip6Config.inc.tcl
> +
> +
> +#
> +# Begin log ...
> +#
> +BeginLog
> +
> +#
> +# BeginScope
> +#
> +BeginScope _IP6CONFIG_SETDATA_CONF2
> +
> +#
> +# Parameter Definition
> +# R_ represents "Remote EFI Side Parameter"
> +# L_ represents "Local ENTS Side Parameter"
> +#
> +UINTN R_Status
> +UINTN R_Context
> +UINTN R_DoneEvent
> +UINTN R_Ip6ConfigDataSize
> +UINT32 R_Ip6ConfigDataType
> +EFI_IP6_CONFIG_INTERFACE_INFO R_Ip6ConfigInterfaceInfo
> +EFI_IP6_CONFIG_INTERFACE_ID R_Ip6ConfigInterfaceId
> +UINT32 R_Ip6ConfigPolicy
> +EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS R_Ip6ConfigDadTransmits
> +
> +#
> +# Check Point: Call Ip6Config->SetData to set manual policy
> +#
> +SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> +SetVar R_Ip6ConfigDataSize [Sizeof UINT32]
> +SetVar R_Ip6ConfigPolicy $IP6CP(Manual)
> +
> +SetVar R_Context 0
> +BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context,\
> + &@R_DoneEvent, &@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "BS.CreateEvent." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.RegisterDataNotify - Register notification event for configuration." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_Status"
> +GetAck
> +GetVar R_Status
> +if { $R_Status == $EFI_SUCCESS } {
> + set assert pass
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.SetData - Call SetData to set manual policy." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +} elseif { $R_Status == $EFI_NOT_READY } {
> + set i 0
> + set L_TimeOut 30
> + while { 1 > 0 } {
> + GetVar R_Context
> + if { $R_Context == 1 } {
> + break
> + } elseif { $i == $L_TimeOut } {
> + set assert fail
> + RecordAssertion $assert $GenericAssertionGuid \
> + "SetData failed.(event hasn't been signaled before TIMEOUT)." \
> + "TIMEOUT value is $L_TimeOut (sec), "
> + SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_SETDATA_CONF2
> + EndLog
> + return
> + }
> + incr i
> + Stall 1
> + }
> +} else {
> + set assert fail
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.SetData - Call SetData to set manual policy." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> + SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_SETDATA_CONF2
> + EndLog
> + return
> +}
> +
> +Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.GetData - Call GetData to get policy value." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +GetVar R_Ip6ConfigPolicy
> +if { $R_Ip6ConfigPolicy == $IP6CP(Manual) } {
> + set assert pass
> +} else {
> + set assert fail
> +
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Set manual policy succeeds(event is signaled correctly and data correct)."
> + SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_SETDATA_CONF2
> + EndLog
> + return
> +}
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Set manual policy succeeds(event is signaled correctly and data correct)."
> +
> +#
> +# Check Point : Set Manual Address with "::"
> +#
> +EFI_IP6_CONFIG_MANUAL_ADDRESS R_Temp_Ip6ConfigManualAddress
> +
> +set L_ManualListLen 1
> +EFI_IP6_CONFIG_MANUAL_ADDRESS R_Ip6ConfigManualAddress
> +set L_UnitLen [Sizeof EFI_IP6_CONFIG_MANUAL_ADDRESS]
> +set L_ListLen [expr {$L_UnitLen * $L_ManualListLen}]
> +SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
> +SetVar R_Ip6ConfigDataSize $L_ListLen
> +SetVar R_Temp_Ip6ConfigManualAddress.IsAnycast FALSE
> +SetVar R_Temp_Ip6ConfigManualAddress.PrefixLength 64
> +SetIpv6Address R_Temp_Ip6ConfigManualAddress.Address "::"
> +SetVar R_Ip6ConfigManualAddress @R_Temp_Ip6ConfigManualAddress
> +
> +Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigManualAddress,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_INVALID_PARAMETER]
> +RecordAssertion $assert $Ip6ConfigSetDataConf2AssertionGuid001 \
> + "Ip6Config.SetData - Call SetData to set manual address (Not Unicast or Linklocal)." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_INVALID_PARAMETER"
> +
> +DelVar R_Ip6ConfigManualAddress
> +
> +#
> +# Check Point : Set Manual Address with duplication of list entries
> +#
> +set L_ManualListLen 3
> +EFI_IP6_CONFIG_MANUAL_ADDRESS R_Ip6ConfigManualAddress($L_ManualListLen)
> +set L_UnitLen [Sizeof EFI_IP6_CONFIG_MANUAL_ADDRESS]
> +set L_ListLen [expr {$L_UnitLen * $L_ManualListLen}]
> +SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
> +SetVar R_Ip6ConfigDataSize $L_ListLen
> +
> +SetVar R_Temp_Ip6ConfigManualAddress.IsAnycast FALSE
> +SetVar R_Temp_Ip6ConfigManualAddress.PrefixLength 64
> +SetIpv6Address R_Temp_Ip6ConfigManualAddress.Address "2002::5000"
> +SetVar R_Ip6ConfigManualAddress(0) @R_Temp_Ip6ConfigManualAddress
> +
> +SetVar R_Temp_Ip6ConfigManualAddress.IsAnycast FALSE
> +SetVar R_Temp_Ip6ConfigManualAddress.PrefixLength 64
> +SetIpv6Address R_Temp_Ip6ConfigManualAddress.Address "2002::5001"
> +SetVar R_Ip6ConfigManualAddress(1) @R_Temp_Ip6ConfigManualAddress
> +
> +SetVar R_Temp_Ip6ConfigManualAddress.IsAnycast FALSE
> +SetVar R_Temp_Ip6ConfigManualAddress.PrefixLength 64
> +SetIpv6Address R_Temp_Ip6ConfigManualAddress.Address "2002::5000"
> +SetVar R_Ip6ConfigManualAddress(2) @R_Temp_Ip6ConfigManualAddress
> +
> +Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigManualAddress,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_INVALID_PARAMETER]
> +RecordAssertion $assert $Ip6ConfigSetDataConf2AssertionGuid002 \
> + "Ip6Config.SetData - Call SetData to set manual address (duplication of list entries)." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_INVALID_PARAMETER"
> +
> +DelVar R_Ip6ConfigManualAddress
> +
> +#
> +# Check Points : Set Gateway with "ff02::1" (multicast address)
> +#
> +set L_GatewayListLen 1
> +EFI_IPv6_ADDRESS R_Temp_Ip6ConfigGateway
> +EFI_IPv6_ADDRESS R_Ip6ConfigGateway
> +set L_UnitLen [Sizeof EFI_IPv6_ADDRESS]
> +set L_ListLen [expr {$L_UnitLen * $L_GatewayListLen}]
> +SetVar R_Ip6ConfigDataType $IP6CDT(Gateway)
> +SetVar R_Ip6ConfigDataSize $L_ListLen
> +
> +SetIpv6Address R_Temp_Ip6ConfigGateway "ff02::1"
> +SetVar R_Ip6ConfigGateway @R_Temp_Ip6ConfigGateway
> +Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigGateway,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_INVALID_PARAMETER]
> +RecordAssertion $assert $Ip6ConfigSetDataConf2AssertionGuid003 \
> + "Ip6Config.SetData - Call SetData to set gateway with multicast address." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_INVALID_PARAMETER"
> +
> +DelVar R_Ip6ConfigGateway
> +
> +#
> +# Check Point : Set Gateway with duplication of list entries
> +#
> +set L_GatewayListLen 3
> +EFI_IPv6_ADDRESS R_Ip6ConfigGateway($L_GatewayListLen)
> +set L_UnitLen [Sizeof EFI_IPv6_ADDRESS]
> +set L_ListLen [expr {$L_UnitLen * $L_GatewayListLen}]
> +SetVar R_Ip6ConfigDataType $IP6CDT(Gateway)
> +SetVar R_Ip6ConfigDataSize $L_ListLen
> +
> +SetIpv6Address R_Temp_Ip6ConfigGateway "2002::5000"
> +SetVar R_Ip6ConfigGateway(0) @R_Temp_Ip6ConfigGateway
> +SetIpv6Address R_Temp_Ip6ConfigGateway "2002::5001"
> +SetVar R_Ip6ConfigGateway(1) @R_Temp_Ip6ConfigGateway
> +SetIpv6Address R_Temp_Ip6ConfigGateway "2002::5000"
> +SetVar R_Ip6ConfigGateway(2) @R_Temp_Ip6ConfigGateway
> +
> +Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigGateway,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_INVALID_PARAMETER]
> +RecordAssertion $assert $Ip6ConfigSetDataConf2AssertionGuid004 \
> + "Ip6Config.SetData - Call SetData to set gateway with duplication of list entries." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_INVALID_PARAMETER"
> +
> +DelVar R_Ip6ConfigGateway
> +
> +#
> +# Check Point : Set Dns Server with "ff02::1" (link local address)
> +#
> +set L_DnsServerListLen 1
> +EFI_IPv6_ADDRESS R_Temp_Ip6ConfigDnsServer
> +EFI_IPv6_ADDRESS R_Ip6ConfigDnsServer
> +set L_UnitLen [Sizeof EFI_IPv6_ADDRESS]
> +set L_ListLen [expr {$L_UnitLen * $L_DnsServerListLen}]
> +SetVar R_Ip6ConfigDataType $IP6CDT(DnsServer)
> +SetVar R_Ip6ConfigDataSize $L_ListLen
> +
> +SetIpv6Address R_Temp_Ip6ConfigDnsServer "ff02::1"
> +SetVar R_Ip6ConfigDnsServer @R_Temp_Ip6ConfigDnsServer
> +
> +Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigDnsServer,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_INVALID_PARAMETER]
> +RecordAssertion $assert $Ip6ConfigSetDataConf2AssertionGuid005 \
> + "Ip6Config.SetData - Call SetData to set dns server with multicast address." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_INVALID_PARAMETER"
> +
> +DelVar R_Ip6ConfigDnsServer
> +
> +#
> +# Clean up
> +#
> +SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> +Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.UnregisterDataNotify - Unregister notification event for configuration." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +BS->CloseEvent {@R_DoneEvent,&@R_Status}
> +GetAck
> +
> +EndScope _IP6CONFIG_SETDATA_CONF2
> +
> EndLog
> \ No newline at end of file
> diff --git a/uefi-sct/EMS/Bin/TestCase/IP6Config/SetData.Conf3.Case1.tcl b/uefi-sct/EMS/Bin/TestCase/IP6Config/SetData.Conf3.Case1.tcl
> index 84a13c6..1cfc489 100644
> --- a/uefi-sct/EMS/Bin/TestCase/IP6Config/SetData.Conf3.Case1.tcl
> +++ b/uefi-sct/EMS/Bin/TestCase/IP6Config/SetData.Conf3.Case1.tcl
> @@ -1,72 +1,72 @@
> -#
> -# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
> -# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
> -#
> -# This program and the accompanying materials
> -# are licensed and made available under the terms and conditions of the BSD License
> -# which accompanies this distribution. The full text of the license may be found at
> -# http://opensource.org/licenses/bsd-license.php
> -#
> -# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> -# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
> -#
> -################################################################################
> -CaseLevel CONFORMANCE
> -CaseAttribute AUTO
> -CaseVerboseLevel DEFAULT
> -set reportfile report.csv
> -
> -#
> -# test case Name, category, description, GUID...
> -#
> -CaseGuid 2FCE7A2D-09F4-4c8e-97CD-68A0045E34B8
> -CaseName SetData.Conf3.Case1
> -CaseCategory IP6Config
> -CaseDescription {SetData must not succeed when data is read-only type.}
> -
> -################################################################################
> -Include IP6Config/Include/Ip6Config.inc.tcl
> -
> -
> -#
> -# Begin log ...
> -#
> -BeginLog
> -
> -#
> -# BeginScope
> -#
> -BeginScope _IP6CONFIG_SETDATA_CONF3
> -
> -#
> -# Parameter Definition
> -# R_ represents "Remote EFI Side Parameter"
> -# L_ represents "Local ENTS Side Parameter"
> -#
> -UINTN R_Status
> -UINTN R_Context
> -UINTN R_DoneEvent
> -UINTN R_Ip6ConfigDataSize
> -UINT32 R_Ip6ConfigDataType
> -EFI_IP6_CONFIG_INTERFACE_INFO R_Ip6ConfigInterfaceInfo
> -EFI_IP6_CONFIG_INTERFACE_ID R_Ip6ConfigInterfaceId
> -UINT32 R_Ip6ConfigPolicy
> -EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS R_Ip6ConfigDadTransmits
> -EFI_IP6_CONFIG_MANUAL_ADDRESS R_Ip6ConfigManualAddress
> -
> -#
> -# Check Point: Call Ip6Config->SetData with data is read only.
> -#
> -SetVar R_Ip6ConfigDataType $IP6CDT(InterfaceInfo)
> -SetVar R_Ip6ConfigDataSize [Sizeof EFI_IP6_CONFIG_INTERFACE_INFO]
> -
> -Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigInterfaceInfo,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_WRITE_PROTECTED]
> -RecordAssertion $assert $Ip6ConfigSetDataConf3AssertionGuid001 \
> - "Ip6Config.SetData - Call SetData with data is read only." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_WRITE_PROTECTED"
> -
> -EndScope _IP6CONFIG_SETDATA_CONF3
> -
> +#
> +# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
> +# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
> +#
> +# This program and the accompanying materials
> +# are licensed and made available under the terms and conditions of the BSD License
> +# which accompanies this distribution. The full text of the license may be found at
> +# http://opensource.org/licenses/bsd-license.php
> +#
> +# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> +# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
> +#
> +################################################################################
> +CaseLevel CONFORMANCE
> +CaseAttribute AUTO
> +CaseVerboseLevel DEFAULT
> +set reportfile report.csv
> +
> +#
> +# test case Name, category, description, GUID...
> +#
> +CaseGuid 2FCE7A2D-09F4-4c8e-97CD-68A0045E34B8
> +CaseName SetData.Conf3.Case1
> +CaseCategory IP6Config
> +CaseDescription {SetData must not succeed when data is read-only type.}
> +
> +################################################################################
> +Include IP6Config/Include/Ip6Config.inc.tcl
> +
> +
> +#
> +# Begin log ...
> +#
> +BeginLog
> +
> +#
> +# BeginScope
> +#
> +BeginScope _IP6CONFIG_SETDATA_CONF3
> +
> +#
> +# Parameter Definition
> +# R_ represents "Remote EFI Side Parameter"
> +# L_ represents "Local ENTS Side Parameter"
> +#
> +UINTN R_Status
> +UINTN R_Context
> +UINTN R_DoneEvent
> +UINTN R_Ip6ConfigDataSize
> +UINT32 R_Ip6ConfigDataType
> +EFI_IP6_CONFIG_INTERFACE_INFO R_Ip6ConfigInterfaceInfo
> +EFI_IP6_CONFIG_INTERFACE_ID R_Ip6ConfigInterfaceId
> +UINT32 R_Ip6ConfigPolicy
> +EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS R_Ip6ConfigDadTransmits
> +EFI_IP6_CONFIG_MANUAL_ADDRESS R_Ip6ConfigManualAddress
> +
> +#
> +# Check Point: Call Ip6Config->SetData with data is read only.
> +#
> +SetVar R_Ip6ConfigDataType $IP6CDT(InterfaceInfo)
> +SetVar R_Ip6ConfigDataSize [Sizeof EFI_IP6_CONFIG_INTERFACE_INFO]
> +
> +Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigInterfaceInfo,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_WRITE_PROTECTED]
> +RecordAssertion $assert $Ip6ConfigSetDataConf3AssertionGuid001 \
> + "Ip6Config.SetData - Call SetData with data is read only." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_WRITE_PROTECTED"
> +
> +EndScope _IP6CONFIG_SETDATA_CONF3
> +
> EndLog
> \ No newline at end of file
> diff --git a/uefi-sct/EMS/Bin/TestCase/IP6Config/SetData.Conf4.Case1.tcl b/uefi-sct/EMS/Bin/TestCase/IP6Config/SetData.Conf4.Case1.tcl
> index 04235cc..597fdac 100644
> --- a/uefi-sct/EMS/Bin/TestCase/IP6Config/SetData.Conf4.Case1.tcl
> +++ b/uefi-sct/EMS/Bin/TestCase/IP6Config/SetData.Conf4.Case1.tcl
> @@ -1,238 +1,238 @@
> -#
> -# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
> -# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
> -#
> -# This program and the accompanying materials
> -# are licensed and made available under the terms and conditions of the BSD License
> -# which accompanies this distribution. The full text of the license may be found at
> -# http://opensource.org/licenses/bsd-license.php
> -#
> -# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> -# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
> -#
> -################################################################################
> -CaseLevel CONFORMANCE
> -CaseAttribute AUTO
> -CaseVerboseLevel DEFAULT
> -set reportfile report.csv
> -
> -#
> -# test case Name, category, description, GUID...
> -#
> -CaseGuid D0A2D271-0BBF-4092-A61E-96FB23208DE0
> -CaseName SetData.Conf4.Case1
> -CaseCategory IP6Config
> -CaseDescription {SetData must not succeed when data is not configurable in current policy.}
> -
> -################################################################################
> -Include IP6Config/Include/Ip6Config.inc.tcl
> -
> -
> -#
> -# Begin log ...
> -#
> -BeginLog
> -
> -#
> -# BeginScope
> -#
> -BeginScope _IP6CONFIG_SETDATA_CONF4
> -
> -#
> -# Parameter Definition
> -# R_ represents "Remote EFI Side Parameter"
> -# L_ represents "Local ENTS Side Parameter"
> -#
> -UINTN R_Status
> -UINTN R_Context
> -UINTN R_DoneEvent
> -UINTN R_Ip6ConfigDataSize
> -UINT32 R_Ip6ConfigDataType
> -EFI_IP6_CONFIG_INTERFACE_INFO R_Ip6ConfigInterfaceInfo
> -EFI_IP6_CONFIG_INTERFACE_ID R_Ip6ConfigInterfaceId
> -UINT32 R_Ip6ConfigPolicy
> -EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS R_Ip6ConfigDadTransmits
> -
> -#
> -# Check Point: Call Ip6Config->SetData to set manual policy
> -#
> -SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> -SetVar R_Ip6ConfigDataSize [Sizeof UINT32]
> -SetVar R_Ip6ConfigPolicy $IP6CP(Automatic)
> -
> -SetVar R_Context 0
> -BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context,\
> - &@R_DoneEvent, &@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "BS.CreateEvent." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.RegisterDataNotify - Register notification event for configuration." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_Status"
> -GetAck
> -GetVar R_Status
> -if { $R_Status == $EFI_SUCCESS } {
> - set assert pass
> - RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.SetData - Call SetData to set manual policy." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -} elseif { $R_Status == $EFI_NOT_READY } {
> - set i 0
> - set L_TimeOut 30
> - while { 1 > 0 } {
> - GetVar R_Context
> - if { $R_Context == 1 } {
> - break
> - } elseif { $i == $L_TimeOut } {
> - set assert fail
> - RecordAssertion $assert $GenericAssertionGuid \
> - "SetData failed.(event hasn't been signaled before TIMEOUT)." \
> - "TIMEOUT value is $L_TimeOut (sec), "
> - SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - EndScope _IP6CONFIG_SETDATA_CONF4
> - EndLog
> - return
> - }
> - incr i
> - Stall 1
> - }
> -} else {
> - set assert fail
> - RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.SetData - Call SetData to set manual policy." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> - SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - EndScope _IP6CONFIG_SETDATA_CONF4
> - EndLog
> - return
> -}
> -
> -Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.GetData - Call GetData to get policy value." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -GetVar R_Ip6ConfigPolicy
> -if { $R_Ip6ConfigPolicy == $IP6CP(Automatic) } {
> - set assert pass
> -} else {
> - set assert fail
> -
> - RecordAssertion $assert $GenericAssertionGuid \
> - "Set automatic policy succeeds(event is signaled correctly and data correct)."
> - SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - EndScope _IP6CONFIG_SETDATA_CONF4
> - EndLog
> - return
> -}
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Set automatic policy succeeds(event is signaled correctly and data correct)."
> -
> -#
> -# Check Point : Set Manual Address under automatic policy
> -#
> -EFI_IP6_CONFIG_MANUAL_ADDRESS R_Temp_Ip6ConfigManualAddress
> -
> -set L_ManualListLen 1
> -EFI_IP6_CONFIG_MANUAL_ADDRESS R_Ip6ConfigManualAddress
> -set L_UnitLen [Sizeof EFI_IP6_CONFIG_MANUAL_ADDRESS]
> -set L_ListLen [expr {$L_UnitLen * $L_ManualListLen}]
> -SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
> -SetVar R_Ip6ConfigDataSize $L_ListLen
> -SetVar R_Temp_Ip6ConfigManualAddress.IsAnycast FALSE
> -SetVar R_Temp_Ip6ConfigManualAddress.PrefixLength 64
> -SetIpv6Address R_Temp_Ip6ConfigManualAddress.Address "2002::5000"
> -SetVar R_Ip6ConfigManualAddress @R_Temp_Ip6ConfigManualAddress
> -
> -Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigManualAddress,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_WRITE_PROTECTED]
> -RecordAssertion $assert $Ip6ConfigSetDataConf4AssertionGuid001 \
> - "Ip6Config.SetData - Call SetData to set manual address under automatic poilcy." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_WRITE_PROTECTED"
> -
> -DelVar R_Ip6ConfigManualAddress
> -
> -#
> -# Check Points : Set Gateway under automatic policy
> -#
> -set L_GatewayListLen 1
> -EFI_IPv6_ADDRESS R_Temp_Ip6ConfigGateway
> -EFI_IPv6_ADDRESS R_Ip6ConfigGateway
> -set L_UnitLen [Sizeof EFI_IPv6_ADDRESS]
> -set L_ListLen [expr {$L_UnitLen * $L_GatewayListLen}]
> -SetVar R_Ip6ConfigDataType $IP6CDT(Gateway)
> -SetVar R_Ip6ConfigDataSize $L_ListLen
> -
> -SetIpv6Address R_Temp_Ip6ConfigGateway "2002::5001"
> -SetVar R_Ip6ConfigGateway @R_Temp_Ip6ConfigGateway
> -Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigGateway,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_WRITE_PROTECTED]
> -RecordAssertion $assert $Ip6ConfigSetDataConf4AssertionGuid002 \
> - "Ip6Config.SetData - Call SetData to set gateway under automatic policy." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_WRITE_PROTECTED"
> -
> -DelVar R_Ip6ConfigGateway
> -
> -#
> -# Check Point : Set Dns Server under automatic policy
> -#
> -set L_DnsServerListLen 1
> -EFI_IPv6_ADDRESS R_Temp_Ip6ConfigDnsServer
> -EFI_IPv6_ADDRESS R_Ip6ConfigDnsServer
> -set L_UnitLen [Sizeof EFI_IPv6_ADDRESS]
> -set L_ListLen [expr {$L_UnitLen * $L_DnsServerListLen}]
> -SetVar R_Ip6ConfigDataType $IP6CDT(DnsServer)
> -SetVar R_Ip6ConfigDataSize $L_ListLen
> -
> -SetIpv6Address R_Temp_Ip6ConfigDnsServer "2002::5001"
> -SetVar R_Ip6ConfigDnsServer @R_Temp_Ip6ConfigDnsServer
> -
> -Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigDnsServer,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_WRITE_PROTECTED]
> -RecordAssertion $assert $Ip6ConfigSetDataConf4AssertionGuid003 \
> - "Ip6Config.SetData - Call SetData to set dns server under automatic policy." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_WRITE_PROTECTED"
> -
> -DelVar R_Ip6ConfigDnsServer
> -
> -#
> -# Clean up
> -#
> -SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> -Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.UnregisterDataNotify - Unregister notification event for configuration." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -BS->CloseEvent {@R_DoneEvent,&@R_Status}
> -GetAck
> -
> -EndScope _IP6CONFIG_SETDATA_CONF4
> -
> +#
> +# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
> +# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
> +#
> +# This program and the accompanying materials
> +# are licensed and made available under the terms and conditions of the BSD License
> +# which accompanies this distribution. The full text of the license may be found at
> +# http://opensource.org/licenses/bsd-license.php
> +#
> +# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> +# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
> +#
> +################################################################################
> +CaseLevel CONFORMANCE
> +CaseAttribute AUTO
> +CaseVerboseLevel DEFAULT
> +set reportfile report.csv
> +
> +#
> +# test case Name, category, description, GUID...
> +#
> +CaseGuid D0A2D271-0BBF-4092-A61E-96FB23208DE0
> +CaseName SetData.Conf4.Case1
> +CaseCategory IP6Config
> +CaseDescription {SetData must not succeed when data is not configurable in current policy.}
> +
> +################################################################################
> +Include IP6Config/Include/Ip6Config.inc.tcl
> +
> +
> +#
> +# Begin log ...
> +#
> +BeginLog
> +
> +#
> +# BeginScope
> +#
> +BeginScope _IP6CONFIG_SETDATA_CONF4
> +
> +#
> +# Parameter Definition
> +# R_ represents "Remote EFI Side Parameter"
> +# L_ represents "Local ENTS Side Parameter"
> +#
> +UINTN R_Status
> +UINTN R_Context
> +UINTN R_DoneEvent
> +UINTN R_Ip6ConfigDataSize
> +UINT32 R_Ip6ConfigDataType
> +EFI_IP6_CONFIG_INTERFACE_INFO R_Ip6ConfigInterfaceInfo
> +EFI_IP6_CONFIG_INTERFACE_ID R_Ip6ConfigInterfaceId
> +UINT32 R_Ip6ConfigPolicy
> +EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS R_Ip6ConfigDadTransmits
> +
> +#
> +# Check Point: Call Ip6Config->SetData to set manual policy
> +#
> +SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> +SetVar R_Ip6ConfigDataSize [Sizeof UINT32]
> +SetVar R_Ip6ConfigPolicy $IP6CP(Automatic)
> +
> +SetVar R_Context 0
> +BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context,\
> + &@R_DoneEvent, &@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "BS.CreateEvent." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.RegisterDataNotify - Register notification event for configuration." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_Status"
> +GetAck
> +GetVar R_Status
> +if { $R_Status == $EFI_SUCCESS } {
> + set assert pass
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.SetData - Call SetData to set manual policy." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +} elseif { $R_Status == $EFI_NOT_READY } {
> + set i 0
> + set L_TimeOut 30
> + while { 1 > 0 } {
> + GetVar R_Context
> + if { $R_Context == 1 } {
> + break
> + } elseif { $i == $L_TimeOut } {
> + set assert fail
> + RecordAssertion $assert $GenericAssertionGuid \
> + "SetData failed.(event hasn't been signaled before TIMEOUT)." \
> + "TIMEOUT value is $L_TimeOut (sec), "
> + SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_SETDATA_CONF4
> + EndLog
> + return
> + }
> + incr i
> + Stall 1
> + }
> +} else {
> + set assert fail
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.SetData - Call SetData to set manual policy." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> + SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_SETDATA_CONF4
> + EndLog
> + return
> +}
> +
> +Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.GetData - Call GetData to get policy value." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +GetVar R_Ip6ConfigPolicy
> +if { $R_Ip6ConfigPolicy == $IP6CP(Automatic) } {
> + set assert pass
> +} else {
> + set assert fail
> +
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Set automatic policy succeeds(event is signaled correctly and data correct)."
> + SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_SETDATA_CONF4
> + EndLog
> + return
> +}
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Set automatic policy succeeds(event is signaled correctly and data correct)."
> +
> +#
> +# Check Point : Set Manual Address under automatic policy
> +#
> +EFI_IP6_CONFIG_MANUAL_ADDRESS R_Temp_Ip6ConfigManualAddress
> +
> +set L_ManualListLen 1
> +EFI_IP6_CONFIG_MANUAL_ADDRESS R_Ip6ConfigManualAddress
> +set L_UnitLen [Sizeof EFI_IP6_CONFIG_MANUAL_ADDRESS]
> +set L_ListLen [expr {$L_UnitLen * $L_ManualListLen}]
> +SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
> +SetVar R_Ip6ConfigDataSize $L_ListLen
> +SetVar R_Temp_Ip6ConfigManualAddress.IsAnycast FALSE
> +SetVar R_Temp_Ip6ConfigManualAddress.PrefixLength 64
> +SetIpv6Address R_Temp_Ip6ConfigManualAddress.Address "2002::5000"
> +SetVar R_Ip6ConfigManualAddress @R_Temp_Ip6ConfigManualAddress
> +
> +Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigManualAddress,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_WRITE_PROTECTED]
> +RecordAssertion $assert $Ip6ConfigSetDataConf4AssertionGuid001 \
> + "Ip6Config.SetData - Call SetData to set manual address under automatic poilcy." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_WRITE_PROTECTED"
> +
> +DelVar R_Ip6ConfigManualAddress
> +
> +#
> +# Check Points : Set Gateway under automatic policy
> +#
> +set L_GatewayListLen 1
> +EFI_IPv6_ADDRESS R_Temp_Ip6ConfigGateway
> +EFI_IPv6_ADDRESS R_Ip6ConfigGateway
> +set L_UnitLen [Sizeof EFI_IPv6_ADDRESS]
> +set L_ListLen [expr {$L_UnitLen * $L_GatewayListLen}]
> +SetVar R_Ip6ConfigDataType $IP6CDT(Gateway)
> +SetVar R_Ip6ConfigDataSize $L_ListLen
> +
> +SetIpv6Address R_Temp_Ip6ConfigGateway "2002::5001"
> +SetVar R_Ip6ConfigGateway @R_Temp_Ip6ConfigGateway
> +Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigGateway,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_WRITE_PROTECTED]
> +RecordAssertion $assert $Ip6ConfigSetDataConf4AssertionGuid002 \
> + "Ip6Config.SetData - Call SetData to set gateway under automatic policy." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_WRITE_PROTECTED"
> +
> +DelVar R_Ip6ConfigGateway
> +
> +#
> +# Check Point : Set Dns Server under automatic policy
> +#
> +set L_DnsServerListLen 1
> +EFI_IPv6_ADDRESS R_Temp_Ip6ConfigDnsServer
> +EFI_IPv6_ADDRESS R_Ip6ConfigDnsServer
> +set L_UnitLen [Sizeof EFI_IPv6_ADDRESS]
> +set L_ListLen [expr {$L_UnitLen * $L_DnsServerListLen}]
> +SetVar R_Ip6ConfigDataType $IP6CDT(DnsServer)
> +SetVar R_Ip6ConfigDataSize $L_ListLen
> +
> +SetIpv6Address R_Temp_Ip6ConfigDnsServer "2002::5001"
> +SetVar R_Ip6ConfigDnsServer @R_Temp_Ip6ConfigDnsServer
> +
> +Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigDnsServer,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_WRITE_PROTECTED]
> +RecordAssertion $assert $Ip6ConfigSetDataConf4AssertionGuid003 \
> + "Ip6Config.SetData - Call SetData to set dns server under automatic policy." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_WRITE_PROTECTED"
> +
> +DelVar R_Ip6ConfigDnsServer
> +
> +#
> +# Clean up
> +#
> +SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> +Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.UnregisterDataNotify - Unregister notification event for configuration." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +BS->CloseEvent {@R_DoneEvent,&@R_Status}
> +GetAck
> +
> +EndScope _IP6CONFIG_SETDATA_CONF4
> +
> EndLog
> \ No newline at end of file
> diff --git a/uefi-sct/EMS/Bin/TestCase/IP6Config/SetData.Conf5.Case1.tcl b/uefi-sct/EMS/Bin/TestCase/IP6Config/SetData.Conf5.Case1.tcl
> index 9b7e9c1..5e5a3e1 100644
> --- a/uefi-sct/EMS/Bin/TestCase/IP6Config/SetData.Conf5.Case1.tcl
> +++ b/uefi-sct/EMS/Bin/TestCase/IP6Config/SetData.Conf5.Case1.tcl
> @@ -1,279 +1,279 @@
> -#
> -# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
> -# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
> -#
> -# This program and the accompanying materials
> -# are licensed and made available under the terms and conditions of the BSD License
> -# which accompanies this distribution. The full text of the license may be found at
> -# http://opensource.org/licenses/bsd-license.php
> -#
> -# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> -# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
> -#
> -################################################################################
> -CaseLevel CONFORMANCE
> -CaseAttribute AUTO
> -CaseVerboseLevel DEFAULT
> -set reportfile report.csv
> -
> -#
> -# test case Name, category, description, GUID...
> -#
> -CaseGuid 1F1728C3-BB62-4f28-9D75-6E631F7A6833
> -CaseName SetData.Conf5.Case1
> -CaseCategory IP6Config
> -CaseDescription {SetData must not succeed when data size does not match the data type.}
> -
> -################################################################################
> -Include IP6Config/Include/Ip6Config.inc.tcl
> -
> -
> -#
> -# Begin log ...
> -#
> -BeginLog
> -
> -#
> -# BeginScope
> -#
> -BeginScope _IP6CONFIG_SETDATA_CONF5
> -
> -#
> -# Parameter Definition
> -# R_ represents "Remote EFI Side Parameter"
> -# L_ represents "Local ENTS Side Parameter"
> -#
> -UINTN R_Status
> -UINTN R_Context
> -UINTN R_DoneEvent
> -UINTN R_Ip6ConfigDataSize
> -UINT32 R_Ip6ConfigDataType
> -EFI_IP6_CONFIG_INTERFACE_INFO R_Ip6ConfigInterfaceInfo
> -EFI_IP6_CONFIG_INTERFACE_ID R_Ip6ConfigInterfaceId
> -UINT32 R_Ip6ConfigPolicy
> -EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS R_Ip6ConfigDadTransmits
> -
> -#
> -# Check Point: Call Ip6Config->SetData to set manual policy
> -#
> -SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> -SetVar R_Ip6ConfigDataSize [Sizeof UINT32]
> -SetVar R_Ip6ConfigPolicy $IP6CP(Manual)
> -
> -SetVar R_Context 0
> -BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context,\
> - &@R_DoneEvent, &@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "BS.CreateEvent." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.RegisterDataNotify - Register notification event for configuration." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_Status"
> -GetAck
> -GetVar R_Status
> -if { $R_Status == $EFI_SUCCESS } {
> - set assert pass
> - RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.SetData - Call SetData to set manual policy." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -} elseif { $R_Status == $EFI_NOT_READY } {
> - set i 0
> - set L_TimeOut 30
> - while { 1 > 0 } {
> - GetVar R_Context
> - if { $R_Context == 1 } {
> - break
> - } elseif { $i == $L_TimeOut } {
> - set assert fail
> - RecordAssertion $assert $GenericAssertionGuid \
> - "SetData failed.(event hasn't been signaled before TIMEOUT)." \
> - "TIMEOUT value is $L_TimeOut (sec), "
> - SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - EndScope _IP6CONFIG_SETDATA_CONF5
> - EndLog
> - return
> - }
> - incr i
> - Stall 1
> - }
> -} else {
> - set assert fail
> - RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.SetData - Call SetData to set manual policy." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> - SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - EndScope _IP6CONFIG_SETDATA_CONF5
> - EndLog
> - return
> -}
> -
> -Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.GetData - Call GetData to get policy value." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -GetVar R_Ip6ConfigPolicy
> -if { $R_Ip6ConfigPolicy == $IP6CP(Manual) } {
> - set assert pass
> -} else {
> - set assert fail
> -
> - RecordAssertion $assert $GenericAssertionGuid \
> - "Set manual policy succeeds(event is signaled correctly and data correct)."
> - SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - EndScope _IP6CONFIG_SETDATA_CONF5
> - EndLog
> - return
> -}
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Set manual policy succeeds(event is signaled correctly and data correct)."
> -
> -#
> -# Check Point : Set Manual Address with wrong data size
> -#
> -EFI_IP6_CONFIG_MANUAL_ADDRESS R_Temp_Ip6ConfigManualAddress
> -
> -set L_ManualListLen 1
> -EFI_IP6_CONFIG_MANUAL_ADDRESS R_Ip6ConfigManualAddress
> -set L_UnitLen [Sizeof EFI_IP6_CONFIG_MANUAL_ADDRESS]
> -set L_ListLen [expr {$L_UnitLen * $L_ManualListLen}]
> -SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
> -SetVar R_Ip6ConfigDataSize 16
> -SetVar R_Temp_Ip6ConfigManualAddress.IsAnycast FALSE
> -SetVar R_Temp_Ip6ConfigManualAddress.PrefixLength 64
> -SetIpv6Address R_Temp_Ip6ConfigManualAddress.Address "2002::5000"
> -SetVar R_Ip6ConfigManualAddress @R_Temp_Ip6ConfigManualAddress
> -
> -Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigManualAddress,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_BAD_BUFFER_SIZE]
> -RecordAssertion $assert $Ip6ConfigSetDataConf5AssertionGuid001 \
> - "Ip6Config.SetData - Call SetData to set manual address with wrong data size." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_BAD_BUFFER_SIZE"
> -DelVar R_Ip6ConfigManualAddress
> -
> -#
> -# Check Points : Set Gateway with wrong data size
> -#
> -set L_GatewayListLen 1
> -EFI_IPv6_ADDRESS R_Temp_Ip6ConfigGateway
> -EFI_IPv6_ADDRESS R_Ip6ConfigGateway
> -set L_UnitLen [Sizeof EFI_IPv6_ADDRESS]
> -set L_ListLen [expr {$L_UnitLen * $L_GatewayListLen}]
> -SetVar R_Ip6ConfigDataType $IP6CDT(Gateway)
> -SetVar R_Ip6ConfigDataSize 8
> -
> -SetIpv6Address R_Temp_Ip6ConfigGateway "2002::5001"
> -SetVar R_Ip6ConfigGateway @R_Temp_Ip6ConfigGateway
> -Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigGateway,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_BAD_BUFFER_SIZE]
> -RecordAssertion $assert $Ip6ConfigSetDataConf5AssertionGuid002 \
> - "Ip6Config.SetData - Call SetData to set gateway with wrong data size." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_BAD_BUFFER_SIZE"
> -
> -DelVar R_Ip6ConfigGateway
> -
> -#
> -# Check Point : Set Dns Server with wrong data size
> -#
> -set L_DnsServerListLen 1
> -EFI_IPv6_ADDRESS R_Temp_Ip6ConfigDnsServer
> -EFI_IPv6_ADDRESS R_Ip6ConfigDnsServer
> -set L_UnitLen [Sizeof EFI_IPv6_ADDRESS]
> -set L_ListLen [expr {$L_UnitLen * $L_DnsServerListLen}]
> -SetVar R_Ip6ConfigDataType $IP6CDT(DnsServer)
> -SetVar R_Ip6ConfigDataSize 8
> -
> -SetIpv6Address R_Temp_Ip6ConfigDnsServer "2002::5002"
> -SetVar R_Ip6ConfigDnsServer @R_Temp_Ip6ConfigDnsServer
> -
> -Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigDnsServer,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_BAD_BUFFER_SIZE]
> -RecordAssertion $assert $Ip6ConfigSetDataConf5AssertionGuid003 \
> - "Ip6Config.SetData - Call SetData to set dns server with wrong data size." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_BAD_BUFFER_SIZE"
> -
> -DelVar R_Ip6ConfigDnsServer
> -
> -#
> -# Check Point : Set Altlfld with wrong data size
> -#
> -SetVar R_Ip6ConfigDataType $IP6CDT(AltInterfaceId)
> -SetVar R_Ip6ConfigDataSize 1
> -
> -Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigInterfaceId,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_BAD_BUFFER_SIZE]
> -RecordAssertion $assert $Ip6ConfigSetDataConf5AssertionGuid004 \
> - "Ip6Config.SetData - Call SetData to set Altlfld with wrong data size." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_BAD_BUFFER_SIZE"
> -
> -#
> -# Check Point : Set DadXmits with wrong data size
> -#
> -SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> -SetVar R_Ip6ConfigDataSize 1
> -SetVar R_Ip6ConfigDadTransmits.DupAddrDetectTransmits 3
> -
> -Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigDadTransmits,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_BAD_BUFFER_SIZE]
> -RecordAssertion $assert $Ip6ConfigSetDataConf5AssertionGuid005 \
> - "Ip6Config.SetData - Call SetData to set DadXmits with wrong data size." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_BAD_BUFFER_SIZE"
> -
> -#
> -# Check Point : Set Policy with wrong data size
> -#
> -SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> -SetVar R_Ip6ConfigDataSize 1
> -SetVar R_Ip6ConfigPolicy $IP6CP(Manual)
> -
> -Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_BAD_BUFFER_SIZE]
> -RecordAssertion $assert $Ip6ConfigSetDataConf5AssertionGuid006 \
> - "Ip6Config.SetData - Call SetData to set Policy with wrong data size." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_BAD_BUFFER_SIZE"
> -
> -#
> -# Clean up
> -#
> -SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> -Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.UnregisterDataNotify - Unregister notification event for configuration." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -BS->CloseEvent {@R_DoneEvent,&@R_Status}
> -GetAck
> -
> -EndScope _IP6CONFIG_SETDATA_CONF5
> -
> +#
> +# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
> +# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
> +#
> +# This program and the accompanying materials
> +# are licensed and made available under the terms and conditions of the BSD License
> +# which accompanies this distribution. The full text of the license may be found at
> +# http://opensource.org/licenses/bsd-license.php
> +#
> +# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> +# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
> +#
> +################################################################################
> +CaseLevel CONFORMANCE
> +CaseAttribute AUTO
> +CaseVerboseLevel DEFAULT
> +set reportfile report.csv
> +
> +#
> +# test case Name, category, description, GUID...
> +#
> +CaseGuid 1F1728C3-BB62-4f28-9D75-6E631F7A6833
> +CaseName SetData.Conf5.Case1
> +CaseCategory IP6Config
> +CaseDescription {SetData must not succeed when data size does not match the data type.}
> +
> +################################################################################
> +Include IP6Config/Include/Ip6Config.inc.tcl
> +
> +
> +#
> +# Begin log ...
> +#
> +BeginLog
> +
> +#
> +# BeginScope
> +#
> +BeginScope _IP6CONFIG_SETDATA_CONF5
> +
> +#
> +# Parameter Definition
> +# R_ represents "Remote EFI Side Parameter"
> +# L_ represents "Local ENTS Side Parameter"
> +#
> +UINTN R_Status
> +UINTN R_Context
> +UINTN R_DoneEvent
> +UINTN R_Ip6ConfigDataSize
> +UINT32 R_Ip6ConfigDataType
> +EFI_IP6_CONFIG_INTERFACE_INFO R_Ip6ConfigInterfaceInfo
> +EFI_IP6_CONFIG_INTERFACE_ID R_Ip6ConfigInterfaceId
> +UINT32 R_Ip6ConfigPolicy
> +EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS R_Ip6ConfigDadTransmits
> +
> +#
> +# Check Point: Call Ip6Config->SetData to set manual policy
> +#
> +SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> +SetVar R_Ip6ConfigDataSize [Sizeof UINT32]
> +SetVar R_Ip6ConfigPolicy $IP6CP(Manual)
> +
> +SetVar R_Context 0
> +BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context,\
> + &@R_DoneEvent, &@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "BS.CreateEvent." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.RegisterDataNotify - Register notification event for configuration." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_Status"
> +GetAck
> +GetVar R_Status
> +if { $R_Status == $EFI_SUCCESS } {
> + set assert pass
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.SetData - Call SetData to set manual policy." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +} elseif { $R_Status == $EFI_NOT_READY } {
> + set i 0
> + set L_TimeOut 30
> + while { 1 > 0 } {
> + GetVar R_Context
> + if { $R_Context == 1 } {
> + break
> + } elseif { $i == $L_TimeOut } {
> + set assert fail
> + RecordAssertion $assert $GenericAssertionGuid \
> + "SetData failed.(event hasn't been signaled before TIMEOUT)." \
> + "TIMEOUT value is $L_TimeOut (sec), "
> + SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_SETDATA_CONF5
> + EndLog
> + return
> + }
> + incr i
> + Stall 1
> + }
> +} else {
> + set assert fail
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.SetData - Call SetData to set manual policy." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> + SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_SETDATA_CONF5
> + EndLog
> + return
> +}
> +
> +Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.GetData - Call GetData to get policy value." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +GetVar R_Ip6ConfigPolicy
> +if { $R_Ip6ConfigPolicy == $IP6CP(Manual) } {
> + set assert pass
> +} else {
> + set assert fail
> +
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Set manual policy succeeds(event is signaled correctly and data correct)."
> + SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_SETDATA_CONF5
> + EndLog
> + return
> +}
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Set manual policy succeeds(event is signaled correctly and data correct)."
> +
> +#
> +# Check Point : Set Manual Address with wrong data size
> +#
> +EFI_IP6_CONFIG_MANUAL_ADDRESS R_Temp_Ip6ConfigManualAddress
> +
> +set L_ManualListLen 1
> +EFI_IP6_CONFIG_MANUAL_ADDRESS R_Ip6ConfigManualAddress
> +set L_UnitLen [Sizeof EFI_IP6_CONFIG_MANUAL_ADDRESS]
> +set L_ListLen [expr {$L_UnitLen * $L_ManualListLen}]
> +SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
> +SetVar R_Ip6ConfigDataSize 16
> +SetVar R_Temp_Ip6ConfigManualAddress.IsAnycast FALSE
> +SetVar R_Temp_Ip6ConfigManualAddress.PrefixLength 64
> +SetIpv6Address R_Temp_Ip6ConfigManualAddress.Address "2002::5000"
> +SetVar R_Ip6ConfigManualAddress @R_Temp_Ip6ConfigManualAddress
> +
> +Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigManualAddress,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_BAD_BUFFER_SIZE]
> +RecordAssertion $assert $Ip6ConfigSetDataConf5AssertionGuid001 \
> + "Ip6Config.SetData - Call SetData to set manual address with wrong data size." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_BAD_BUFFER_SIZE"
> +DelVar R_Ip6ConfigManualAddress
> +
> +#
> +# Check Points : Set Gateway with wrong data size
> +#
> +set L_GatewayListLen 1
> +EFI_IPv6_ADDRESS R_Temp_Ip6ConfigGateway
> +EFI_IPv6_ADDRESS R_Ip6ConfigGateway
> +set L_UnitLen [Sizeof EFI_IPv6_ADDRESS]
> +set L_ListLen [expr {$L_UnitLen * $L_GatewayListLen}]
> +SetVar R_Ip6ConfigDataType $IP6CDT(Gateway)
> +SetVar R_Ip6ConfigDataSize 8
> +
> +SetIpv6Address R_Temp_Ip6ConfigGateway "2002::5001"
> +SetVar R_Ip6ConfigGateway @R_Temp_Ip6ConfigGateway
> +Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigGateway,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_BAD_BUFFER_SIZE]
> +RecordAssertion $assert $Ip6ConfigSetDataConf5AssertionGuid002 \
> + "Ip6Config.SetData - Call SetData to set gateway with wrong data size." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_BAD_BUFFER_SIZE"
> +
> +DelVar R_Ip6ConfigGateway
> +
> +#
> +# Check Point : Set Dns Server with wrong data size
> +#
> +set L_DnsServerListLen 1
> +EFI_IPv6_ADDRESS R_Temp_Ip6ConfigDnsServer
> +EFI_IPv6_ADDRESS R_Ip6ConfigDnsServer
> +set L_UnitLen [Sizeof EFI_IPv6_ADDRESS]
> +set L_ListLen [expr {$L_UnitLen * $L_DnsServerListLen}]
> +SetVar R_Ip6ConfigDataType $IP6CDT(DnsServer)
> +SetVar R_Ip6ConfigDataSize 8
> +
> +SetIpv6Address R_Temp_Ip6ConfigDnsServer "2002::5002"
> +SetVar R_Ip6ConfigDnsServer @R_Temp_Ip6ConfigDnsServer
> +
> +Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigDnsServer,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_BAD_BUFFER_SIZE]
> +RecordAssertion $assert $Ip6ConfigSetDataConf5AssertionGuid003 \
> + "Ip6Config.SetData - Call SetData to set dns server with wrong data size." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_BAD_BUFFER_SIZE"
> +
> +DelVar R_Ip6ConfigDnsServer
> +
> +#
> +# Check Point : Set Altlfld with wrong data size
> +#
> +SetVar R_Ip6ConfigDataType $IP6CDT(AltInterfaceId)
> +SetVar R_Ip6ConfigDataSize 1
> +
> +Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigInterfaceId,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_BAD_BUFFER_SIZE]
> +RecordAssertion $assert $Ip6ConfigSetDataConf5AssertionGuid004 \
> + "Ip6Config.SetData - Call SetData to set Altlfld with wrong data size." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_BAD_BUFFER_SIZE"
> +
> +#
> +# Check Point : Set DadXmits with wrong data size
> +#
> +SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> +SetVar R_Ip6ConfigDataSize 1
> +SetVar R_Ip6ConfigDadTransmits.DupAddrDetectTransmits 3
> +
> +Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigDadTransmits,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_BAD_BUFFER_SIZE]
> +RecordAssertion $assert $Ip6ConfigSetDataConf5AssertionGuid005 \
> + "Ip6Config.SetData - Call SetData to set DadXmits with wrong data size." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_BAD_BUFFER_SIZE"
> +
> +#
> +# Check Point : Set Policy with wrong data size
> +#
> +SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> +SetVar R_Ip6ConfigDataSize 1
> +SetVar R_Ip6ConfigPolicy $IP6CP(Manual)
> +
> +Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_BAD_BUFFER_SIZE]
> +RecordAssertion $assert $Ip6ConfigSetDataConf5AssertionGuid006 \
> + "Ip6Config.SetData - Call SetData to set Policy with wrong data size." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_BAD_BUFFER_SIZE"
> +
> +#
> +# Clean up
> +#
> +SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> +Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.UnregisterDataNotify - Unregister notification event for configuration." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +BS->CloseEvent {@R_DoneEvent,&@R_Status}
> +GetAck
> +
> +EndScope _IP6CONFIG_SETDATA_CONF5
> +
> EndLog
> \ No newline at end of file
> diff --git a/uefi-sct/EMS/Bin/TestCase/IP6Config/SetData.Conf6.Case1.tcl b/uefi-sct/EMS/Bin/TestCase/IP6Config/SetData.Conf6.Case1.tcl
> index 0430336..0bc8880 100644
> --- a/uefi-sct/EMS/Bin/TestCase/IP6Config/SetData.Conf6.Case1.tcl
> +++ b/uefi-sct/EMS/Bin/TestCase/IP6Config/SetData.Conf6.Case1.tcl
> @@ -1,72 +1,72 @@
> -#
> -# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
> -# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
> -#
> -# This program and the accompanying materials
> -# are licensed and made available under the terms and conditions of the BSD License
> -# which accompanies this distribution. The full text of the license may be found at
> -# http://opensource.org/licenses/bsd-license.php
> -#
> -# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> -# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
> -#
> -################################################################################
> -CaseLevel CONFORMANCE
> -CaseAttribute AUTO
> -CaseVerboseLevel DEFAULT
> -set reportfile report.csv
> -
> -#
> -# test case Name, category, description, GUID...
> -#
> -CaseGuid 6C5FB23E-96A5-475a-8B7E-24B9BBB99C2A
> -CaseName SetData.Conf6.Case1
> -CaseCategory IP6Config
> -CaseDescription {SetData must not succeed when data type is not supported.}
> -
> -################################################################################
> -Include IP6Config/Include/Ip6Config.inc.tcl
> -
> -
> -#
> -# Begin log ...
> -#
> -BeginLog
> -
> -#
> -# BeginScope
> -#
> -BeginScope _IP6CONFIG_SETDATA_CONF6
> -
> -#
> -# Parameter Definition
> -# R_ represents "Remote EFI Side Parameter"
> -# L_ represents "Local ENTS Side Parameter"
> -#
> -UINTN R_Status
> -UINTN R_Context
> -UINTN R_DoneEvent
> -UINTN R_Ip6ConfigDataSize
> -UINT32 R_Ip6ConfigDataType
> -EFI_IP6_CONFIG_INTERFACE_INFO R_Ip6ConfigInterfaceInfo
> -EFI_IP6_CONFIG_INTERFACE_ID R_Ip6ConfigInterfaceId
> -UINT32 R_Ip6ConfigPolicy
> -EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS R_Ip6ConfigDadTransmits
> -EFI_IP6_CONFIG_MANUAL_ADDRESS R_Ip6ConfigManualAddress
> -UINT32 R_Ip6ConfigMaximum
> -#
> -# Check Point: Call Ip6Config->SetData when data type is not supported.
> -#
> -SetVar R_Ip6ConfigDataType $IP6CDT(Maximum)
> -SetVar R_Ip6ConfigDataSize [Sizeof UINT32]
> -
> -Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigMaximum,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_UNSUPPORTED]
> -RecordAssertion $assert $Ip6ConfigSetDataConf6AssertionGuid001 \
> - "Ip6Config.SetData - Call SetData with the data type not supported." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_UNSUPPORTED"
> -
> -EndScope _IP6CONFIG_SETDATA_CONF6
> -
> +#
> +# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
> +# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
> +#
> +# This program and the accompanying materials
> +# are licensed and made available under the terms and conditions of the BSD License
> +# which accompanies this distribution. The full text of the license may be found at
> +# http://opensource.org/licenses/bsd-license.php
> +#
> +# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> +# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
> +#
> +################################################################################
> +CaseLevel CONFORMANCE
> +CaseAttribute AUTO
> +CaseVerboseLevel DEFAULT
> +set reportfile report.csv
> +
> +#
> +# test case Name, category, description, GUID...
> +#
> +CaseGuid 6C5FB23E-96A5-475a-8B7E-24B9BBB99C2A
> +CaseName SetData.Conf6.Case1
> +CaseCategory IP6Config
> +CaseDescription {SetData must not succeed when data type is not supported.}
> +
> +################################################################################
> +Include IP6Config/Include/Ip6Config.inc.tcl
> +
> +
> +#
> +# Begin log ...
> +#
> +BeginLog
> +
> +#
> +# BeginScope
> +#
> +BeginScope _IP6CONFIG_SETDATA_CONF6
> +
> +#
> +# Parameter Definition
> +# R_ represents "Remote EFI Side Parameter"
> +# L_ represents "Local ENTS Side Parameter"
> +#
> +UINTN R_Status
> +UINTN R_Context
> +UINTN R_DoneEvent
> +UINTN R_Ip6ConfigDataSize
> +UINT32 R_Ip6ConfigDataType
> +EFI_IP6_CONFIG_INTERFACE_INFO R_Ip6ConfigInterfaceInfo
> +EFI_IP6_CONFIG_INTERFACE_ID R_Ip6ConfigInterfaceId
> +UINT32 R_Ip6ConfigPolicy
> +EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS R_Ip6ConfigDadTransmits
> +EFI_IP6_CONFIG_MANUAL_ADDRESS R_Ip6ConfigManualAddress
> +UINT32 R_Ip6ConfigMaximum
> +#
> +# Check Point: Call Ip6Config->SetData when data type is not supported.
> +#
> +SetVar R_Ip6ConfigDataType $IP6CDT(Maximum)
> +SetVar R_Ip6ConfigDataSize [Sizeof UINT32]
> +
> +Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigMaximum,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_UNSUPPORTED]
> +RecordAssertion $assert $Ip6ConfigSetDataConf6AssertionGuid001 \
> + "Ip6Config.SetData - Call SetData with the data type not supported." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_UNSUPPORTED"
> +
> +EndScope _IP6CONFIG_SETDATA_CONF6
> +
> EndLog
> \ No newline at end of file
> diff --git a/uefi-sct/EMS/Bin/TestCase/IP6Config/SetData.Conf7.Case1.tcl b/uefi-sct/EMS/Bin/TestCase/IP6Config/SetData.Conf7.Case1.tcl
> index 15e118b..22b5676 100644
> --- a/uefi-sct/EMS/Bin/TestCase/IP6Config/SetData.Conf7.Case1.tcl
> +++ b/uefi-sct/EMS/Bin/TestCase/IP6Config/SetData.Conf7.Case1.tcl
> @@ -1,510 +1,510 @@
> -#
> -# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
> -# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
> -#
> -# This program and the accompanying materials
> -# are licensed and made available under the terms and conditions of the BSD License
> -# which accompanies this distribution. The full text of the license may be found at
> -# http://opensource.org/licenses/bsd-license.php
> -#
> -# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> -# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
> -#
> -################################################################################
> -CaseLevel CONFORMANCE
> -CaseAttribute AUTO
> -CaseVerboseLevel DEFAULT
> -set reportfile report.csv
> -
> -#
> -# test case Name, category, description, GUID...
> -#
> -CaseGuid 477D07AC-6FEB-460b-BA92-A98245862D09
> -CaseName SetData.Conf7.Case1
> -CaseCategory IP6Config
> -CaseDescription {SetData must not succeed when the last asynchronous process for the data type has not been finished yet.}
> -
> -################################################################################
> -Include IP6Config/Include/Ip6Config.inc.tcl
> -
> -
> -#
> -# Begin log ...
> -#
> -BeginLog
> -
> -#
> -# BeginScope
> -#
> -BeginScope _IP6CONFIG_SETDATA_CONF7
> -
> -#
> -# Parameter Definition
> -# R_ represents "Remote EFI Side Parameter"
> -# L_ represents "Local ENTS Side Parameter"
> -#
> -UINTN R_Status
> -UINTN R_Context
> -UINTN R_DoneEvent
> -UINTN R_Context1
> -UINTN R_DoneEvent1
> -UINTN R_Ip6ConfigDataSize
> -UINT32 R_Ip6ConfigDataType
> -EFI_IP6_CONFIG_INTERFACE_INFO R_Ip6ConfigInterfaceInfo
> -EFI_IP6_CONFIG_INTERFACE_ID R_Ip6ConfigInterfaceId
> -UINT32 R_Ip6ConfigPolicy
> -EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS R_Ip6ConfigDadTransmits
> -
> -#
> -# Check Point: Call Ip6Config->SetData to set manual policy
> -#
> -SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> -SetVar R_Ip6ConfigDataSize [Sizeof UINT32]
> -SetVar R_Ip6ConfigPolicy $IP6CP(Manual)
> -
> -SetVar R_Context 0
> -BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context,\
> - &@R_DoneEvent, &@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "BS.CreateEvent." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.RegisterDataNotify - Register notification event for configuration." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_Status"
> -GetAck
> -GetVar R_Status
> -if { $R_Status == $EFI_SUCCESS } {
> - set assert pass
> - RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.SetData - Call SetData to set manual policy." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -} elseif { $R_Status == $EFI_NOT_READY } {
> - set i 0
> - set L_TimeOut 30
> - while { 1 > 0 } {
> - GetVar R_Context
> - if { $R_Context == 1 } {
> - break
> - } elseif { $i == $L_TimeOut } {
> - set assert fail
> - RecordAssertion $assert $GenericAssertionGuid \
> - "SetData failed.(event hasn't been signaled before TIMEOUT)." \
> - "TIMEOUT value is $L_TimeOut (sec), "
> -
> - SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - EndScope _IP6CONFIG_SETDATA_CONF7
> - EndLog
> - return
> - }
> - incr i
> - Stall 1
> - }
> -} else {
> - set assert fail
> - RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.SetData - Call SetData to set manual policy." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> - SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - EndScope _IP6CONFIG_SETDATA_CONF7
> - EndLog
> - return
> -}
> -
> -Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.GetData - Call GetData to get policy value." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -GetVar R_Ip6ConfigPolicy
> -if { $R_Ip6ConfigPolicy == $IP6CP(Manual) } {
> - set assert pass
> -} else {
> - set assert fail
> -
> - RecordAssertion $assert $GenericAssertionGuid \
> - "Set manual policy succeeds(event is signaled correctly and data correct)."
> - SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - EndScope _IP6CONFIG_SETDATA_CONF7
> - EndLog
> - return
> -}
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Set manual policy succeeds(event is signaled correctly and data correct)."
> -
> -#
> -# Check Point: Call Ip6Config->SetData to set DadXmits 20
> -#
> -SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> -SetVar R_Ip6ConfigDataSize [Sizeof EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS]
> -SetVar R_Ip6ConfigDadTransmits.DupAddrDetectTransmits 20
> -
> -SetVar R_Context1 0
> -BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context1,\
> - &@R_DoneEvent1, &@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "BS.CreateEvent." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.RegisterDataNotify - Register notification event for configuration." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigDadTransmits,&@R_Status"
> -GetAck
> -GetVar R_Status
> -if { $R_Status == $EFI_SUCCESS } {
> - set assert pass
> - RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.SetData - Call SetData to set DadXmits 20." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -} elseif { $R_Status == $EFI_NOT_READY } {
> - set i 0
> - set L_TimeOut 30
> - while { 1 > 0 } {
> - GetVar R_Context1
> - if { $R_Context1 == 1 } {
> - break
> - } elseif { $i == $L_TimeOut } {
> - set assert fail
> - RecordAssertion $assert $GenericAssertionGuid \
> - "SetData failed.(event hasn't been signaled before TIMEOUT)." \
> - "TIMEOUT value is $L_TimeOut (sec), "
> -
> - SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> - GetAck
> - EndScope _IP6CONFIG_SETDATA_CONF7
> - EndLog
> - return
> - }
> - incr i
> - Stall 1
> - }
> -} else {
> - set assert fail
> - RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.SetData - Call SetData to set DadXmits 20." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> - SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> - GetAck
> - EndScope _IP6CONFIG_SETDATA_CONF7
> - EndLog
> - return
> -}
> -
> -Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigDadTransmits,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.GetData - Call GetData to get DadXmits value." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -GetVar R_Ip6ConfigDadTransmits.DupAddrDetectTransmits
> -if { ${R_Ip6ConfigDadTransmits.DupAddrDetectTransmits} == 20 } {
> - set assert pass
> -} else {
> - set assert fail
> -
> - RecordAssertion $assert $GenericAssertionGuid \
> - "Set DadXmits succeeds(event is signaled correctly and data correct)."
> - SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> - GetAck
> - EndScope _IP6CONFIG_SETDATA_CONF7
> - EndLog
> - return
> -}
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Set DadXmits succeeds(event is signaled correctly and data correct)."
> -
> -#
> -# Check Point : Set Manual Address with valid parameter
> -#
> -EFI_IP6_CONFIG_MANUAL_ADDRESS R_Temp_Ip6ConfigManualAddress
> -
> -set L_ManualListLen 1
> -EFI_IP6_CONFIG_MANUAL_ADDRESS R_Ip6ConfigManualAddress
> -set L_UnitLen [Sizeof EFI_IP6_CONFIG_MANUAL_ADDRESS]
> -set L_ListLen [expr {$L_UnitLen * $L_ManualListLen}]
> -SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
> -SetVar R_Ip6ConfigDataSize $L_ListLen
> -SetVar R_Temp_Ip6ConfigManualAddress.IsAnycast FALSE
> -SetVar R_Temp_Ip6ConfigManualAddress.PrefixLength 64
> -SetIpv6Address R_Temp_Ip6ConfigManualAddress.Address "2002::5000"
> -SetVar R_Ip6ConfigManualAddress @R_Temp_Ip6ConfigManualAddress
> -
> -Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigManualAddress,&@R_Status"
> -GetAck
> -GetVar R_Status
> -if { $R_Status == $EFI_NOT_READY } {
> - set assert pass
> -} else {
> - set assert fail
> -
> - RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.SetData - Call SetData to set manual address with valid parameter." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_NOT_READY"
> - SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> - GetAck
> - EndScope _IP6CONFIG_SETDATA_CONF7
> - EndLog
> - return
> -}
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.SetData - Call SetData to set manual address with valid parameter." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_NOT_READY"
> -
> -DelVar R_Ip6ConfigManualAddress
> -
> -#
> -# Check Point : Set Manual Address with valid parameter before the former setting finishes
> -#
> -set L_ManualListLen 1
> -EFI_IP6_CONFIG_MANUAL_ADDRESS R_Ip6ConfigManualAddress
> -set L_UnitLen [Sizeof EFI_IP6_CONFIG_MANUAL_ADDRESS]
> -set L_ListLen [expr {$L_UnitLen * $L_ManualListLen}]
> -SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
> -SetVar R_Ip6ConfigDataSize $L_ListLen
> -SetVar R_Temp_Ip6ConfigManualAddress.IsAnycast FALSE
> -SetVar R_Temp_Ip6ConfigManualAddress.PrefixLength 64
> -SetIpv6Address R_Temp_Ip6ConfigManualAddress.Address "2002::5001"
> -SetVar R_Ip6ConfigManualAddress @R_Temp_Ip6ConfigManualAddress
> -
> -Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigManualAddress,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_ACCESS_DENIED]
> -RecordAssertion $assert $Ip6ConfigSetDataConf7AssertionGuid001 \
> - "Ip6Config.SetData - Call SetData to set manual address with valid parameter before the former setting finishes." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_ACCESS_DENIED"
> -
> -
> -#
> -# Make sure the former configurations succeeds
> -# (Eliminate the side-effect to other cases)
> -#
> -set i 0
> -set L_TimeOut 30
> -Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigManualAddress,&@R_Status"
> -GetAck
> -GetVar R_Status
> -set assert pass
> -while { $R_Status == $EFI_NOT_READY } {
> - Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigManualAddress,&@R_Status"
> - GetAck
> - GetVar R_Status
> - if { $R_Status == $EFI_SUCCESS } {
> - break
> - } elseif { $i == $L_TimeOut } {
> - set assert fail
> -
> - RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.SetData - former SetData finishes." \
> - "TimeUsed - $i, TimeOut Value- $L_TimeOut"
> - SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> - GetAck
> - EndScope _IP6CONFIG_SETDATA_CONF7
> - EndLog
> - return
> - }
> - incr i
> - Stall 1
> -}
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.SetData - former SetData finishes." \
> - "TimeUsed - $i, TimeOut Value- $L_TimeOut"
> -
> -#
> -# Set automatic policy (this will clean up all address information configured)
> -#
> -SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> -SetVar R_Ip6ConfigDataSize [Sizeof UINT32]
> -SetVar R_Ip6ConfigPolicy $IP6CP(Automatic)
> -
> -SetVar R_Context 0
> -
> -Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_Status"
> -GetAck
> -GetVar R_Status
> -if { $R_Status == $EFI_SUCCESS } {
> - set assert pass
> -} elseif { $R_Status == $EFI_NOT_READY } {
> - set i 0
> - set L_TimeOut 30
> - set assert pass
> - while { 1 > 0 } {
> - GetVar R_Context
> - if { $R_Context == 1 } {
> - break
> - } elseif { $i == $L_TimeOut } {
> - set assert fail
> -
> - RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.SetData - Set automatic policy to clean up the former configuration." \
> - "TimeUsed - $i, TimeOut Value- $L_TimeOut"
> - SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> - GetAck
> -
> - EndScope _IP6CONFIG_SETDATA_CONF7
> - EndLog
> - return
> - }
> - incr i
> - Stall 1
> - }
> -} else {
> - set assert fail
> -
> - RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.SetData - Set automatic policy to clean up the former configuration." \
> - "TimeUsed - $i, TimeOut Value- $L_TimeOut"
> - SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> - GetAck
> -
> - EndScope _IP6CONFIG_SETDATA_CONF7
> - EndLog
> - return
> -}
> -
> -Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_Status"
> -GetAck
> -GetVar R_Ip6ConfigPolicy
> -if { $R_Ip6ConfigPolicy == $IP6CP(Automatic) } {
> - set assert pass
> -} else {
> - set assert fail
> -
> - RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.SetData - Set automatic policy to clean up the former configuration." \
> - "TimeUsed - $i, TimeOut Value- $L_TimeOut"
> - SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> - GetAck
> -
> - EndScope _IP6CONFIG_SETDATA_CONF7
> - EndLog
> -
> - return
> -}
> -
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.SetData - Set automatic policy to clean up the former configuration." \
> - "TimeUsed - $i, TimeOut Value- $L_TimeOut"
> -
> -
> -#
> -# Clean up
> -#
> -SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> -Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.UnregisterDataNotify - Unregister notification event for configuration." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -BS->CloseEvent {@R_DoneEvent,&@R_Status}
> -GetAck
> -
> -SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> -Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.UnregisterDataNotify - Unregister notification event for configuration." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> -GetAck
> -
> -EndScope _IP6CONFIG_SETDATA_CONF7
> -
> -EndLog
> -
> +#
> +# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
> +# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
> +#
> +# This program and the accompanying materials
> +# are licensed and made available under the terms and conditions of the BSD License
> +# which accompanies this distribution. The full text of the license may be found at
> +# http://opensource.org/licenses/bsd-license.php
> +#
> +# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> +# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
> +#
> +################################################################################
> +CaseLevel CONFORMANCE
> +CaseAttribute AUTO
> +CaseVerboseLevel DEFAULT
> +set reportfile report.csv
> +
> +#
> +# test case Name, category, description, GUID...
> +#
> +CaseGuid 477D07AC-6FEB-460b-BA92-A98245862D09
> +CaseName SetData.Conf7.Case1
> +CaseCategory IP6Config
> +CaseDescription {SetData must not succeed when the last asynchronous process for the data type has not been finished yet.}
> +
> +################################################################################
> +Include IP6Config/Include/Ip6Config.inc.tcl
> +
> +
> +#
> +# Begin log ...
> +#
> +BeginLog
> +
> +#
> +# BeginScope
> +#
> +BeginScope _IP6CONFIG_SETDATA_CONF7
> +
> +#
> +# Parameter Definition
> +# R_ represents "Remote EFI Side Parameter"
> +# L_ represents "Local ENTS Side Parameter"
> +#
> +UINTN R_Status
> +UINTN R_Context
> +UINTN R_DoneEvent
> +UINTN R_Context1
> +UINTN R_DoneEvent1
> +UINTN R_Ip6ConfigDataSize
> +UINT32 R_Ip6ConfigDataType
> +EFI_IP6_CONFIG_INTERFACE_INFO R_Ip6ConfigInterfaceInfo
> +EFI_IP6_CONFIG_INTERFACE_ID R_Ip6ConfigInterfaceId
> +UINT32 R_Ip6ConfigPolicy
> +EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS R_Ip6ConfigDadTransmits
> +
> +#
> +# Check Point: Call Ip6Config->SetData to set manual policy
> +#
> +SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> +SetVar R_Ip6ConfigDataSize [Sizeof UINT32]
> +SetVar R_Ip6ConfigPolicy $IP6CP(Manual)
> +
> +SetVar R_Context 0
> +BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context,\
> + &@R_DoneEvent, &@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "BS.CreateEvent." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.RegisterDataNotify - Register notification event for configuration." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_Status"
> +GetAck
> +GetVar R_Status
> +if { $R_Status == $EFI_SUCCESS } {
> + set assert pass
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.SetData - Call SetData to set manual policy." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +} elseif { $R_Status == $EFI_NOT_READY } {
> + set i 0
> + set L_TimeOut 30
> + while { 1 > 0 } {
> + GetVar R_Context
> + if { $R_Context == 1 } {
> + break
> + } elseif { $i == $L_TimeOut } {
> + set assert fail
> + RecordAssertion $assert $GenericAssertionGuid \
> + "SetData failed.(event hasn't been signaled before TIMEOUT)." \
> + "TIMEOUT value is $L_TimeOut (sec), "
> +
> + SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_SETDATA_CONF7
> + EndLog
> + return
> + }
> + incr i
> + Stall 1
> + }
> +} else {
> + set assert fail
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.SetData - Call SetData to set manual policy." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> + SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_SETDATA_CONF7
> + EndLog
> + return
> +}
> +
> +Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.GetData - Call GetData to get policy value." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +GetVar R_Ip6ConfigPolicy
> +if { $R_Ip6ConfigPolicy == $IP6CP(Manual) } {
> + set assert pass
> +} else {
> + set assert fail
> +
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Set manual policy succeeds(event is signaled correctly and data correct)."
> + SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_SETDATA_CONF7
> + EndLog
> + return
> +}
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Set manual policy succeeds(event is signaled correctly and data correct)."
> +
> +#
> +# Check Point: Call Ip6Config->SetData to set DadXmits 20
> +#
> +SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> +SetVar R_Ip6ConfigDataSize [Sizeof EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS]
> +SetVar R_Ip6ConfigDadTransmits.DupAddrDetectTransmits 20
> +
> +SetVar R_Context1 0
> +BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context1,\
> + &@R_DoneEvent1, &@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "BS.CreateEvent." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.RegisterDataNotify - Register notification event for configuration." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigDadTransmits,&@R_Status"
> +GetAck
> +GetVar R_Status
> +if { $R_Status == $EFI_SUCCESS } {
> + set assert pass
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.SetData - Call SetData to set DadXmits 20." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +} elseif { $R_Status == $EFI_NOT_READY } {
> + set i 0
> + set L_TimeOut 30
> + while { 1 > 0 } {
> + GetVar R_Context1
> + if { $R_Context1 == 1 } {
> + break
> + } elseif { $i == $L_TimeOut } {
> + set assert fail
> + RecordAssertion $assert $GenericAssertionGuid \
> + "SetData failed.(event hasn't been signaled before TIMEOUT)." \
> + "TIMEOUT value is $L_TimeOut (sec), "
> +
> + SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_SETDATA_CONF7
> + EndLog
> + return
> + }
> + incr i
> + Stall 1
> + }
> +} else {
> + set assert fail
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.SetData - Call SetData to set DadXmits 20." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> + SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_SETDATA_CONF7
> + EndLog
> + return
> +}
> +
> +Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigDadTransmits,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.GetData - Call GetData to get DadXmits value." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +GetVar R_Ip6ConfigDadTransmits.DupAddrDetectTransmits
> +if { ${R_Ip6ConfigDadTransmits.DupAddrDetectTransmits} == 20 } {
> + set assert pass
> +} else {
> + set assert fail
> +
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Set DadXmits succeeds(event is signaled correctly and data correct)."
> + SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_SETDATA_CONF7
> + EndLog
> + return
> +}
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Set DadXmits succeeds(event is signaled correctly and data correct)."
> +
> +#
> +# Check Point : Set Manual Address with valid parameter
> +#
> +EFI_IP6_CONFIG_MANUAL_ADDRESS R_Temp_Ip6ConfigManualAddress
> +
> +set L_ManualListLen 1
> +EFI_IP6_CONFIG_MANUAL_ADDRESS R_Ip6ConfigManualAddress
> +set L_UnitLen [Sizeof EFI_IP6_CONFIG_MANUAL_ADDRESS]
> +set L_ListLen [expr {$L_UnitLen * $L_ManualListLen}]
> +SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
> +SetVar R_Ip6ConfigDataSize $L_ListLen
> +SetVar R_Temp_Ip6ConfigManualAddress.IsAnycast FALSE
> +SetVar R_Temp_Ip6ConfigManualAddress.PrefixLength 64
> +SetIpv6Address R_Temp_Ip6ConfigManualAddress.Address "2002::5000"
> +SetVar R_Ip6ConfigManualAddress @R_Temp_Ip6ConfigManualAddress
> +
> +Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigManualAddress,&@R_Status"
> +GetAck
> +GetVar R_Status
> +if { $R_Status == $EFI_NOT_READY } {
> + set assert pass
> +} else {
> + set assert fail
> +
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.SetData - Call SetData to set manual address with valid parameter." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_NOT_READY"
> + SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_SETDATA_CONF7
> + EndLog
> + return
> +}
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.SetData - Call SetData to set manual address with valid parameter." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_NOT_READY"
> +
> +DelVar R_Ip6ConfigManualAddress
> +
> +#
> +# Check Point : Set Manual Address with valid parameter before the former setting finishes
> +#
> +set L_ManualListLen 1
> +EFI_IP6_CONFIG_MANUAL_ADDRESS R_Ip6ConfigManualAddress
> +set L_UnitLen [Sizeof EFI_IP6_CONFIG_MANUAL_ADDRESS]
> +set L_ListLen [expr {$L_UnitLen * $L_ManualListLen}]
> +SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
> +SetVar R_Ip6ConfigDataSize $L_ListLen
> +SetVar R_Temp_Ip6ConfigManualAddress.IsAnycast FALSE
> +SetVar R_Temp_Ip6ConfigManualAddress.PrefixLength 64
> +SetIpv6Address R_Temp_Ip6ConfigManualAddress.Address "2002::5001"
> +SetVar R_Ip6ConfigManualAddress @R_Temp_Ip6ConfigManualAddress
> +
> +Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigManualAddress,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_ACCESS_DENIED]
> +RecordAssertion $assert $Ip6ConfigSetDataConf7AssertionGuid001 \
> + "Ip6Config.SetData - Call SetData to set manual address with valid parameter before the former setting finishes." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_ACCESS_DENIED"
> +
> +
> +#
> +# Make sure the former configurations succeeds
> +# (Eliminate the side-effect to other cases)
> +#
> +set i 0
> +set L_TimeOut 30
> +Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigManualAddress,&@R_Status"
> +GetAck
> +GetVar R_Status
> +set assert pass
> +while { $R_Status == $EFI_NOT_READY } {
> + Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigManualAddress,&@R_Status"
> + GetAck
> + GetVar R_Status
> + if { $R_Status == $EFI_SUCCESS } {
> + break
> + } elseif { $i == $L_TimeOut } {
> + set assert fail
> +
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.SetData - former SetData finishes." \
> + "TimeUsed - $i, TimeOut Value- $L_TimeOut"
> + SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_SETDATA_CONF7
> + EndLog
> + return
> + }
> + incr i
> + Stall 1
> +}
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.SetData - former SetData finishes." \
> + "TimeUsed - $i, TimeOut Value- $L_TimeOut"
> +
> +#
> +# Set automatic policy (this will clean up all address information configured)
> +#
> +SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> +SetVar R_Ip6ConfigDataSize [Sizeof UINT32]
> +SetVar R_Ip6ConfigPolicy $IP6CP(Automatic)
> +
> +SetVar R_Context 0
> +
> +Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_Status"
> +GetAck
> +GetVar R_Status
> +if { $R_Status == $EFI_SUCCESS } {
> + set assert pass
> +} elseif { $R_Status == $EFI_NOT_READY } {
> + set i 0
> + set L_TimeOut 30
> + set assert pass
> + while { 1 > 0 } {
> + GetVar R_Context
> + if { $R_Context == 1 } {
> + break
> + } elseif { $i == $L_TimeOut } {
> + set assert fail
> +
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.SetData - Set automatic policy to clean up the former configuration." \
> + "TimeUsed - $i, TimeOut Value- $L_TimeOut"
> + SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> + GetAck
> +
> + EndScope _IP6CONFIG_SETDATA_CONF7
> + EndLog
> + return
> + }
> + incr i
> + Stall 1
> + }
> +} else {
> + set assert fail
> +
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.SetData - Set automatic policy to clean up the former configuration." \
> + "TimeUsed - $i, TimeOut Value- $L_TimeOut"
> + SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> + GetAck
> +
> + EndScope _IP6CONFIG_SETDATA_CONF7
> + EndLog
> + return
> +}
> +
> +Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_Status"
> +GetAck
> +GetVar R_Ip6ConfigPolicy
> +if { $R_Ip6ConfigPolicy == $IP6CP(Automatic) } {
> + set assert pass
> +} else {
> + set assert fail
> +
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.SetData - Set automatic policy to clean up the former configuration." \
> + "TimeUsed - $i, TimeOut Value- $L_TimeOut"
> + SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> + GetAck
> +
> + EndScope _IP6CONFIG_SETDATA_CONF7
> + EndLog
> +
> + return
> +}
> +
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.SetData - Set automatic policy to clean up the former configuration." \
> + "TimeUsed - $i, TimeOut Value- $L_TimeOut"
> +
> +
> +#
> +# Clean up
> +#
> +SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> +Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.UnregisterDataNotify - Unregister notification event for configuration." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +BS->CloseEvent {@R_DoneEvent,&@R_Status}
> +GetAck
> +
> +SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> +Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.UnregisterDataNotify - Unregister notification event for configuration." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> +GetAck
> +
> +EndScope _IP6CONFIG_SETDATA_CONF7
> +
> +EndLog
> +
> diff --git a/uefi-sct/EMS/Bin/TestCase/IP6Config/SetData.Func1.Case1.tcl b/uefi-sct/EMS/Bin/TestCase/IP6Config/SetData.Func1.Case1.tcl
> index 2053775..d35f104 100644
> --- a/uefi-sct/EMS/Bin/TestCase/IP6Config/SetData.Func1.Case1.tcl
> +++ b/uefi-sct/EMS/Bin/TestCase/IP6Config/SetData.Func1.Case1.tcl
> @@ -1,274 +1,274 @@
> -#
> -# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
> -# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
> -#
> -# This program and the accompanying materials
> -# are licensed and made available under the terms and conditions of the BSD License
> -# which accompanies this distribution. The full text of the license may be found at
> -# http://opensource.org/licenses/bsd-license.php
> -#
> -# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> -# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
> -#
> -################################################################################
> -CaseLevel FUNCTION
> -CaseAttribute AUTO
> -CaseVerboseLevel DEFAULT
> -set reportfile report.csv
> -
> -#
> -# test case Name, category, description, GUID...
> -#
> -CaseGuid EF8FF5B4-8855-4fbd-87C5-C28C7312302A
> -CaseName SetData.Func1.Case1
> -CaseCategory IP6Config
> -CaseDescription {SetData must succeed with valid parameters.}
> -
> -################################################################################
> -Include IP6Config/Include/Ip6Config.inc.tcl
> -
> -
> -#
> -# Begin log ...
> -#
> -BeginLog
> -
> -#
> -# BeginScope
> -#
> -BeginScope _IP6CONFIG_SETDATA_FUNC1
> -
> -#
> -# Parameter Definition
> -# R_ represents "Remote EFI Side Parameter"
> -# L_ represents "Local ENTS Side Parameter"
> -#
> -UINTN R_Status
> -UINTN R_Context
> -UINTN R_Context1
> -UINTN R_DoneEvent
> -UINTN R_DoneEvent1
> -UINTN R_Ip6ConfigDataSize
> -UINT32 R_Ip6ConfigDataType
> -EFI_IP6_CONFIG_INTERFACE_INFO R_Ip6ConfigInterfaceInfo
> -EFI_IP6_CONFIG_INTERFACE_ID R_Ip6ConfigInterfaceId
> -UINT32 R_Ip6ConfigPolicy
> -EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS R_Ip6ConfigDadTransmits
> -
> -#
> -# Check Point: Call Ip6Config->SetData to set AltInterfaceId
> -#
> -SetVar R_Ip6ConfigDataType $IP6CDT(AltInterfaceId)
> -SetVar R_Ip6ConfigDataSize [Sizeof EFI_IP6_CONFIG_INTERFACE_ID]
> -SetVar R_Ip6ConfigInterfaceId.Id(0) 0
> -SetVar R_Ip6ConfigInterfaceId.Id(1) 1
> -SetVar R_Ip6ConfigInterfaceId.Id(2) 2
> -SetVar R_Ip6ConfigInterfaceId.Id(3) 3
> -SetVar R_Ip6ConfigInterfaceId.Id(4) 4
> -SetVar R_Ip6ConfigInterfaceId.Id(5) 5
> -SetVar R_Ip6ConfigInterfaceId.Id(6) 6
> -SetVar R_Ip6ConfigInterfaceId.Id(7) 7
> -
> -SetVar R_Context 0
> -BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context,\
> - &@R_DoneEvent, &@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "BS.CreateEvent." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.RegisterDataNotify - Register notification event for configuration." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigInterfaceId,&@R_Status"
> -GetAck
> -GetVar R_Status
> -if { $R_Status == $EFI_SUCCESS } {
> - set assert pass
> - RecordAssertion $assert $Ip6ConfigSetDataFunc1AssertionGuid001 \
> - "Ip6Config.SetData - Call SetData to set AltInterfaceId." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -} elseif { $R_Status == $EFI_NOT_READY } {
> - set i 0
> - set L_TimeOut 30
> - while { 1 > 0 } {
> - GetVar R_Context
> - if { $R_Context == 1 } {
> - break
> - } elseif { $i == $L_TimeOut } {
> - set assert fail
> - RecordAssertion $assert $Ip6ConfigSetDataFunc1AssertionGuid001 \
> - "SetData failed.(event hasn't been signaled before TIMEOUT)." \
> - "TIMEOUT value is $L_TimeOut (sec), "
> -
> - SetVar R_Ip6ConfigDataType $IP6CDT(AltInterfaceId)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - EndScope _IP6CONFIG_SETDATA_FUNC1
> - EndLog
> - return
> - }
> - incr i
> - Stall 1
> - }
> -} else {
> - set assert fail
> - RecordAssertion $assert $Ip6ConfigSetDataFunc1AssertionGuid001 \
> - "Ip6Config.SetData - Call SetData to set AltInterfaceId." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -
> - SetVar R_Ip6ConfigDataType $IP6CDT(AltInterfaceId)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - EndScope _IP6CONFIG_SETDATA_FUNC1
> - EndLog
> - return
> -}
> -
> -Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigInterfaceId,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.GetData - Call GetData to get AltInterfaceId value." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -GetVar R_Ip6ConfigInterfaceId
> -if { ${R_Ip6ConfigInterfaceId.Id(0)} == 0 && ${R_Ip6ConfigInterfaceId.Id(1)} == 1 && ${R_Ip6ConfigInterfaceId.Id(2)} == 2 && ${R_Ip6ConfigInterfaceId.Id(3)} == 3 && ${R_Ip6ConfigInterfaceId.Id(4)} == 4 && ${R_Ip6ConfigInterfaceId.Id(5)} == 5 && ${R_Ip6ConfigInterfaceId.Id(6)} == 6 && ${R_Ip6ConfigInterfaceId.Id(7)} == 7} {
> - set assert pass
> -} else {
> - set assert fail
> -}
> -RecordAssertion $assert $Ip6ConfigSetDataFunc1AssertionGuid002 \
> - "Set AltInterfaceId succeeds(event is signaled correctly and data correct)."
> -
> -#
> -# Check Point: Call Ip6Config->SetData to set DadXmits
> -#
> -SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> -SetVar R_Ip6ConfigDataSize [Sizeof EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS]
> -SetVar R_Ip6ConfigDadTransmits.DupAddrDetectTransmits 3
> -
> -SetVar R_Context1 0
> -BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context1,\
> - &@R_DoneEvent1, &@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "BS.CreateEvent." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.RegisterDataNotify - Register notification event for configuration." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigDadTransmits,&@R_Status"
> -GetAck
> -GetVar R_Status
> -if { $R_Status == $EFI_SUCCESS } {
> - set assert pass
> - RecordAssertion $assert $Ip6ConfigSetDataFunc1AssertionGuid003 \
> - "Ip6Config.SetData - Call SetData to set DadXmits." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -} elseif { $R_Status == $EFI_NOT_READY } {
> - set i 0
> - set L_TimeOut 30
> - while { 1 > 0 } {
> - GetVar R_Context1
> - if { $R_Context1 == 1 } {
> - break
> - } elseif { $i == $L_TimeOut } {
> - set assert fail
> - RecordAssertion $assert $Ip6ConfigSetDataFunc1AssertionGuid003 \
> - "SetData failed.(event hasn't been signaled before TIMEOUT)." \
> - "TIMEOUT value is $L_TimeOut (sec), "
> -
> - SetVar R_Ip6ConfigDataType $IP6CDT(AltInterfaceId)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> - GetAck
> - EndScope _IP6CONFIG_SETDATA_FUNC1
> - EndLog
> - return
> - }
> - incr i
> - Stall 1
> - }
> -} else {
> - set assert fail
> - RecordAssertion $assert $Ip6ConfigSetDataFunc1AssertionGuid003 \
> - "Ip6Config.SetData - Call SetData to set manual DadXmits." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> - SetVar R_Ip6ConfigDataType $IP6CDT(AltInterfaceId)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> - GetAck
> - EndScope _IP6CONFIG_SETDATA_FUNC1
> - EndLog
> -}
> -
> -Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigDadTransmits,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.GetData - Call GetData to get DadXmits value." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -GetVar R_Ip6ConfigDadTransmits
> -if { ${R_Ip6ConfigDadTransmits.DupAddrDetectTransmits} == 3 } {
> - set assert pass
> -} else {
> - set assert fail
> -}
> -RecordAssertion $assert $Ip6ConfigSetDataFunc1AssertionGuid004 \
> - "Set DadXmits succeeds(event is signaled correctly and data correct)."
> -
> -#
> -# Clean up
> -#
> -SetVar R_Ip6ConfigDataType $IP6CDT(AltInterfaceId)
> -Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.UnregisterDataNotify - Unregister notification event for configuration." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -BS->CloseEvent {@R_DoneEvent,&@R_Status}
> -GetAck
> -
> -SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> -Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.UnregisterDataNotify - Unregister notification event for configuration." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> -GetAck
> -
> -EndScope _IP6CONFIG_SETDATA_FUNC1
> -
> +#
> +# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
> +# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
> +#
> +# This program and the accompanying materials
> +# are licensed and made available under the terms and conditions of the BSD License
> +# which accompanies this distribution. The full text of the license may be found at
> +# http://opensource.org/licenses/bsd-license.php
> +#
> +# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> +# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
> +#
> +################################################################################
> +CaseLevel FUNCTION
> +CaseAttribute AUTO
> +CaseVerboseLevel DEFAULT
> +set reportfile report.csv
> +
> +#
> +# test case Name, category, description, GUID...
> +#
> +CaseGuid EF8FF5B4-8855-4fbd-87C5-C28C7312302A
> +CaseName SetData.Func1.Case1
> +CaseCategory IP6Config
> +CaseDescription {SetData must succeed with valid parameters.}
> +
> +################################################################################
> +Include IP6Config/Include/Ip6Config.inc.tcl
> +
> +
> +#
> +# Begin log ...
> +#
> +BeginLog
> +
> +#
> +# BeginScope
> +#
> +BeginScope _IP6CONFIG_SETDATA_FUNC1
> +
> +#
> +# Parameter Definition
> +# R_ represents "Remote EFI Side Parameter"
> +# L_ represents "Local ENTS Side Parameter"
> +#
> +UINTN R_Status
> +UINTN R_Context
> +UINTN R_Context1
> +UINTN R_DoneEvent
> +UINTN R_DoneEvent1
> +UINTN R_Ip6ConfigDataSize
> +UINT32 R_Ip6ConfigDataType
> +EFI_IP6_CONFIG_INTERFACE_INFO R_Ip6ConfigInterfaceInfo
> +EFI_IP6_CONFIG_INTERFACE_ID R_Ip6ConfigInterfaceId
> +UINT32 R_Ip6ConfigPolicy
> +EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS R_Ip6ConfigDadTransmits
> +
> +#
> +# Check Point: Call Ip6Config->SetData to set AltInterfaceId
> +#
> +SetVar R_Ip6ConfigDataType $IP6CDT(AltInterfaceId)
> +SetVar R_Ip6ConfigDataSize [Sizeof EFI_IP6_CONFIG_INTERFACE_ID]
> +SetVar R_Ip6ConfigInterfaceId.Id(0) 0
> +SetVar R_Ip6ConfigInterfaceId.Id(1) 1
> +SetVar R_Ip6ConfigInterfaceId.Id(2) 2
> +SetVar R_Ip6ConfigInterfaceId.Id(3) 3
> +SetVar R_Ip6ConfigInterfaceId.Id(4) 4
> +SetVar R_Ip6ConfigInterfaceId.Id(5) 5
> +SetVar R_Ip6ConfigInterfaceId.Id(6) 6
> +SetVar R_Ip6ConfigInterfaceId.Id(7) 7
> +
> +SetVar R_Context 0
> +BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context,\
> + &@R_DoneEvent, &@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "BS.CreateEvent." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.RegisterDataNotify - Register notification event for configuration." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigInterfaceId,&@R_Status"
> +GetAck
> +GetVar R_Status
> +if { $R_Status == $EFI_SUCCESS } {
> + set assert pass
> + RecordAssertion $assert $Ip6ConfigSetDataFunc1AssertionGuid001 \
> + "Ip6Config.SetData - Call SetData to set AltInterfaceId." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +} elseif { $R_Status == $EFI_NOT_READY } {
> + set i 0
> + set L_TimeOut 30
> + while { 1 > 0 } {
> + GetVar R_Context
> + if { $R_Context == 1 } {
> + break
> + } elseif { $i == $L_TimeOut } {
> + set assert fail
> + RecordAssertion $assert $Ip6ConfigSetDataFunc1AssertionGuid001 \
> + "SetData failed.(event hasn't been signaled before TIMEOUT)." \
> + "TIMEOUT value is $L_TimeOut (sec), "
> +
> + SetVar R_Ip6ConfigDataType $IP6CDT(AltInterfaceId)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_SETDATA_FUNC1
> + EndLog
> + return
> + }
> + incr i
> + Stall 1
> + }
> +} else {
> + set assert fail
> + RecordAssertion $assert $Ip6ConfigSetDataFunc1AssertionGuid001 \
> + "Ip6Config.SetData - Call SetData to set AltInterfaceId." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +
> + SetVar R_Ip6ConfigDataType $IP6CDT(AltInterfaceId)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_SETDATA_FUNC1
> + EndLog
> + return
> +}
> +
> +Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigInterfaceId,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.GetData - Call GetData to get AltInterfaceId value." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +GetVar R_Ip6ConfigInterfaceId
> +if { ${R_Ip6ConfigInterfaceId.Id(0)} == 0 && ${R_Ip6ConfigInterfaceId.Id(1)} == 1 && ${R_Ip6ConfigInterfaceId.Id(2)} == 2 && ${R_Ip6ConfigInterfaceId.Id(3)} == 3 && ${R_Ip6ConfigInterfaceId.Id(4)} == 4 && ${R_Ip6ConfigInterfaceId.Id(5)} == 5 && ${R_Ip6ConfigInterfaceId.Id(6)} == 6 && ${R_Ip6ConfigInterfaceId.Id(7)} == 7} {
> + set assert pass
> +} else {
> + set assert fail
> +}
> +RecordAssertion $assert $Ip6ConfigSetDataFunc1AssertionGuid002 \
> + "Set AltInterfaceId succeeds(event is signaled correctly and data correct)."
> +
> +#
> +# Check Point: Call Ip6Config->SetData to set DadXmits
> +#
> +SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> +SetVar R_Ip6ConfigDataSize [Sizeof EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS]
> +SetVar R_Ip6ConfigDadTransmits.DupAddrDetectTransmits 3
> +
> +SetVar R_Context1 0
> +BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context1,\
> + &@R_DoneEvent1, &@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "BS.CreateEvent." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.RegisterDataNotify - Register notification event for configuration." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigDadTransmits,&@R_Status"
> +GetAck
> +GetVar R_Status
> +if { $R_Status == $EFI_SUCCESS } {
> + set assert pass
> + RecordAssertion $assert $Ip6ConfigSetDataFunc1AssertionGuid003 \
> + "Ip6Config.SetData - Call SetData to set DadXmits." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +} elseif { $R_Status == $EFI_NOT_READY } {
> + set i 0
> + set L_TimeOut 30
> + while { 1 > 0 } {
> + GetVar R_Context1
> + if { $R_Context1 == 1 } {
> + break
> + } elseif { $i == $L_TimeOut } {
> + set assert fail
> + RecordAssertion $assert $Ip6ConfigSetDataFunc1AssertionGuid003 \
> + "SetData failed.(event hasn't been signaled before TIMEOUT)." \
> + "TIMEOUT value is $L_TimeOut (sec), "
> +
> + SetVar R_Ip6ConfigDataType $IP6CDT(AltInterfaceId)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_SETDATA_FUNC1
> + EndLog
> + return
> + }
> + incr i
> + Stall 1
> + }
> +} else {
> + set assert fail
> + RecordAssertion $assert $Ip6ConfigSetDataFunc1AssertionGuid003 \
> + "Ip6Config.SetData - Call SetData to set manual DadXmits." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> + SetVar R_Ip6ConfigDataType $IP6CDT(AltInterfaceId)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_SETDATA_FUNC1
> + EndLog
> +}
> +
> +Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigDadTransmits,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.GetData - Call GetData to get DadXmits value." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +GetVar R_Ip6ConfigDadTransmits
> +if { ${R_Ip6ConfigDadTransmits.DupAddrDetectTransmits} == 3 } {
> + set assert pass
> +} else {
> + set assert fail
> +}
> +RecordAssertion $assert $Ip6ConfigSetDataFunc1AssertionGuid004 \
> + "Set DadXmits succeeds(event is signaled correctly and data correct)."
> +
> +#
> +# Clean up
> +#
> +SetVar R_Ip6ConfigDataType $IP6CDT(AltInterfaceId)
> +Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.UnregisterDataNotify - Unregister notification event for configuration." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +BS->CloseEvent {@R_DoneEvent,&@R_Status}
> +GetAck
> +
> +SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> +Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.UnregisterDataNotify - Unregister notification event for configuration." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> +GetAck
> +
> +EndScope _IP6CONFIG_SETDATA_FUNC1
> +
> EndLog
> \ No newline at end of file
> diff --git a/uefi-sct/EMS/Bin/TestCase/IP6Config/SetData.Func2.Case1.tcl b/uefi-sct/EMS/Bin/TestCase/IP6Config/SetData.Func2.Case1.tcl
> new file mode 100644
> index 0000000..4d9ec42
> --- /dev/null
> +++ b/uefi-sct/EMS/Bin/TestCase/IP6Config/SetData.Func2.Case1.tcl
> @@ -0,0 +1,838 @@
> +#
> +# Copyright (c) 2018, Intel Corporation. All rights reserved.<BR>
> +#
> +# This program and the accompanying materials
> +# are licensed and made available under the terms and conditions of the BSD License
> +# which accompanies this distribution. The full text of the license may be found at
> +# http://opensource.org/licenses/bsd-license.php
> +#
> +# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> +# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
> +#
> +################################################################################
> +CaseLevel CONFORMANCE
> +CaseAttribute AUTO
> +CaseVerboseLevel DEFAULT
> +set reportfile report.csv
> +
> +#
> +# test case Name, category, description, GUID...
> +#
> +CaseGuid 79F40434-2684-459C-8EEB-DCFB822D93F7
> +CaseName SetData.Func2.Case1
> +CaseCategory IP6Config
> +CaseDescription {SetData to clear the configuration.}
> +
> +################################################################################
> +Include IP6Config/Include/Ip6Config.inc.tcl
> +
> +#
> +# Begin log ...
> +#
> +BeginLog
> +
> +#
> +# BeginScope
> +#
> +BeginScope _IP6CONFIG_SETDATA_FUNC2
> +
> +#
> +# Parameter Definition
> +# R_ represents "Remote EFI Side Parameter"
> +# L_ represents "Local ENTS Side Parameter"
> +#
> +UINTN R_Status
> +UINTN R_Context
> +UINTN R_DoneEvent
> +UINTN R_Ip6ConfigDataSize
> +UINT32 R_Ip6ConfigDataType
> +EFI_IP6_CONFIG_INTERFACE_INFO R_Ip6ConfigInterfaceInfo
> +EFI_IP6_CONFIG_INTERFACE_ID R_Ip6ConfigInterfaceId
> +UINT32 R_Ip6ConfigPolicy
> +EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS R_Ip6ConfigDadTransmits
> +
> +#
> +# Check Point: Call Ip6Config->SetData to set manual policy
> +#
> +SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> +SetVar R_Ip6ConfigDataSize [Sizeof UINT32]
> +SetVar R_Ip6ConfigPolicy $IP6CP(Manual)
> +
> +SetVar R_Context 0
> +BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context,\
> + &@R_DoneEvent, &@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "BS.CreateEvent." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.RegisterDataNotify - Register notification event for configuration." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_Status"
> +GetAck
> +GetVar R_Status
> +if { $R_Status == $EFI_SUCCESS } {
> + set assert pass
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.SetData - Call SetData to set manual policy." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +} elseif { $R_Status == $EFI_NOT_READY } {
> + set i 0
> + set L_TimeOut 30
> + while { 1 > 0 } {
> + GetVar R_Context
> + if { $R_Context == 1 } {
> + break
> + } elseif { $i == $L_TimeOut } {
> + set assert fail
> + RecordAssertion $assert $GenericAssertionGuid \
> + "SetData failed.(event hasn't been signaled before TIMEOUT)." \
> + "TIMEOUT value is $L_TimeOut (sec), "
> +
> + SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_SETDATA_FUNC2
> + EndLog
> + return
> + }
> + incr i
> + Stall 1
> + }
> +} else {
> + set assert fail
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.SetData - Call SetData to set manual policy." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> + SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_SETDATA_FUNC2
> + EndLog
> + return
> +}
> +
> +SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> +Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> +GetAck
> +BS->CloseEvent {@R_DoneEvent,&@R_Status}
> +GetAck
> +
> +Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.GetData - Call GetData to get policy value." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +GetVar R_Ip6ConfigPolicy
> +if { $R_Ip6ConfigPolicy == $IP6CP(Manual) } {
> + set assert pass
> +} else {
> + set assert fail
> +
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Set manual policy fails(event is signaled correctly but data is incorrect)."
> + EndScope _IP6CONFIG_SETDATA_FUNC2
> + EndLog
> + return
> +}
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Set manual policy succeeds(event is signaled correctly and data correct)."
> +
> +#
> +# Check Point: Call Ip6Config->SetData to set DadXmits 20
> +#
> +SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> +SetVar R_Ip6ConfigDataSize [Sizeof EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS]
> +SetVar R_Ip6ConfigDadTransmits.DupAddrDetectTransmits 20
> +
> +SetVar R_Context 0
> +BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context,\
> + &@R_DoneEvent, &@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "BS.CreateEvent." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.RegisterDataNotify - Register notification event for configuration." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigDadTransmits,&@R_Status"
> +GetAck
> +GetVar R_Status
> +if { $R_Status == $EFI_SUCCESS } {
> + set assert pass
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.SetData - Call SetData to set DadXmits 20." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +} elseif { $R_Status == $EFI_NOT_READY } {
> + set i 0
> + set L_TimeOut 30
> + while { 1 > 0 } {
> + GetVar R_Context
> + if { $R_Context == 1 } {
> + break
> + } elseif { $i == $L_TimeOut } {
> + set assert fail
> + RecordAssertion $assert $GenericAssertionGuid \
> + "SetData failed.(event hasn't been signaled before TIMEOUT)." \
> + "TIMEOUT value is $L_TimeOut (sec), "
> +
> + SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_SETDATA_FUNC2
> + EndLog
> + return
> + }
> + incr i
> + Stall 1
> + }
> +} else {
> + set assert fail
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.SetData - Call SetData to set DadXmits 20." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> + SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_SETDATA_FUNC2
> + EndLog
> + return
> +}
> +
> +SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> +Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> +GetAck
> +BS->CloseEvent {@R_DoneEvent,&@R_Status}
> +GetAck
> +
> +Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigDadTransmits,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.GetData - Call GetData to get DadXmits value." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +GetVar R_Ip6ConfigDadTransmits.DupAddrDetectTransmits
> +if { ${R_Ip6ConfigDadTransmits.DupAddrDetectTransmits} == 20 } {
> + set assert pass
> +} else {
> + set assert fail
> +
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Set DadXmits fails(event is signaled correctly but data is incorrect)."
> +
> + EndScope _IP6CONFIG_SETDATA_FUNC2
> + EndLog
> + return
> +}
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Set DadXmits succeeds(event is signaled correctly and data correct)."
> +
> +Stall 30
> +
> +#
> +# Check Point : Set Manual Address with valid parameter
> +#
> +
> +EFI_IP6_CONFIG_MANUAL_ADDRESS R_Temp_Ip6ConfigManualAddress
> +
> +set L_ManualListLen 1
> +EFI_IP6_CONFIG_MANUAL_ADDRESS R_Ip6ConfigManualAddress
> +set L_UnitLen [Sizeof EFI_IP6_CONFIG_MANUAL_ADDRESS]
> +set L_ListLen [expr {$L_UnitLen * $L_ManualListLen}]
> +SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
> +SetVar R_Ip6ConfigDataSize $L_ListLen
> +SetVar R_Temp_Ip6ConfigManualAddress.IsAnycast FALSE
> +SetVar R_Temp_Ip6ConfigManualAddress.PrefixLength 64
> +SetIpv6Address R_Temp_Ip6ConfigManualAddress.Address "2002::5000"
> +SetVar R_Ip6ConfigManualAddress @R_Temp_Ip6ConfigManualAddress
> +
> +SetVar R_Context 0
> +BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context,\
> + &@R_DoneEvent, &@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "BS.CreateEvent." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.RegisterDataNotify - Register notification event for configuration." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigManualAddress,&@R_Status"
> +GetAck
> +GetVar R_Status
> +if { $R_Status == $EFI_SUCCESS } {
> + set assert pass
> + RecordAssertion $assert $Ip6ConfigSetDataFunc2AssertionGuid001 \
> + "Ip6Config.SetData - Call SetData to set MANUAL ADDRESS." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +} elseif { $R_Status == $EFI_NOT_READY } {
> + set i 0
> + set L_TimeOut 30
> + while { 1 > 0 } {
> + GetVar R_Context
> + if { $R_Context == 1 } {
> + break
> + } elseif { $i == $L_TimeOut } {
> + set assert fail
> + RecordAssertion $assert $Ip6ConfigSetDataFunc2AssertionGuid001 \
> + "SetData to set MANUAL ADDRESS fail.(event hasn't been signaled before TIMEOUT)." \
> + "TIMEOUT value is $L_TimeOut (sec), "
> +
> + SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_SETDATA_FUNC2
> + EndLog
> + return
> + }
> + incr i
> + Stall 1
> + }
> +} else {
> + set assert fail
> + RecordAssertion $assert $Ip6ConfigSetDataFunc2AssertionGuid001 \
> + "Ip6Config.SetData - Call SetData to set MANUAL ADDRESS." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> + SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_SETDATA_FUNC2
> + EndLog
> + return
> +}
> +
> +SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
> +Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> +GetAck
> +BS->CloseEvent {@R_DoneEvent,&@R_Status}
> +GetAck
> +
> +Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigManualAddress,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.GetData - Call GetData to get Manual Address." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +GetVar R_Ip6ConfigManualAddress
> +
> +set L_Proc_Ipv6Address [GetIpv6Address {R_Ip6ConfigManualAddress.Address}]
> +if { [string compare $L_Proc_Ipv6Address 2002:0000:0000:0000:0000:0000:0000:5000] != 0 } {
> + puts $L_Proc_Ipv6Address
> + set assert fail
> +
> + RecordAssertion $assert $Ip6ConfigSetDataFunc2AssertionGuid002 \
> + "Ip6Config.SetData - Set Gateway fail(event is signaled correctly but data is incorrect.)"
> +} elseif {${R_Ip6ConfigManualAddress.PrefixLength} != 64} {
> + set assert fail
> +
> + RecordAssertion $assert $Ip6ConfigSetDataFunc2AssertionGuid002 \
> + "Ip6Config.SetData - Set Gateway fail(event is signaled correctly but data is incorrect.)"
> +
> +} elseif {${R_Ip6ConfigManualAddress.IsAnycast} != false} {
> + set assert fail
> +
> + RecordAssertion $assert $Ip6ConfigSetDataFunc2AssertionGuid002 \
> + "Ip6Config.SetData - Set Gateway fail(event is signaled correctly but data is incorrect.)"
> +
> +} else {
> + RecordAssertion $assert $Ip6ConfigSetDataFunc2AssertionGuid002 \
> + "Ip6Config.SetData - Set Gateway success(event is signaled correctly and data is correct.)"
> +}
> +
> +#
> +# Clear the Manual Address
> +#
> +SetVar R_Context 0
> +BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context,\
> + &@R_DoneEvent, &@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "BS.CreateEvent." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.RegisterDataNotify - Register notification event for configuration." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +Ip6Config->SetData "@R_Ip6ConfigDataType,0,NULL,&@R_Status"
> +GetAck
> +GetVar R_Status
> +if { $R_Status == $EFI_SUCCESS } {
> + set assert pass
> + RecordAssertion $assert $Ip6ConfigSetDataFunc2AssertionGuid003 \
> + "Ip6Config.SetData - Call SetData to clear MANUAL ADDRESS." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +} elseif { $R_Status == $EFI_NOT_READY } {
> + set i 0
> + set L_TimeOut 30
> + while { 1 > 0 } {
> + GetVar R_Context
> + if { $R_Context == 1 } {
> + break
> + } elseif { $i == $L_TimeOut } {
> + set assert fail
> + RecordAssertion $assert $Ip6ConfigSetDataFunc2AssertionGuid003 \
> + "SetData to clear MANUAL ADDRESS fail.(event hasn't been signaled before TIMEOUT)." \
> + "TIMEOUT value is $L_TimeOut (sec), "
> +
> + SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_SETDATA_FUNC2
> + EndLog
> + return
> + }
> + incr i
> + Stall 1
> + }
> +} else {
> + set assert fail
> + RecordAssertion $assert $Ip6ConfigSetDataFunc2AssertionGuid003 \
> + "Ip6Config.SetData - Call SetData to clear MANUAL ADDRESS." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> + SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_SETDATA_FUNC2
> + EndLog
> + return
> +}
> +
> +SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
> +Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> +GetAck
> +BS->CloseEvent {@R_DoneEvent,&@R_Status}
> +GetAck
> +
> +Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigManualAddress,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_NOT_FOUND]
> +RecordAssertion $assert $Ip6ConfigSetDataFunc2AssertionGuid004 \
> + "Ip6Config.GetData - Call GetData to get Manual Address." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_NOT_FOUND"
> +
> +
> +#
> +# Check Point : Set Gateway with valid parameter
> +#
> +
> +set L_GatewayListLen 1
> +EFI_IPv6_ADDRESS R_Temp_Ip6ConfigGateway
> +EFI_IPv6_ADDRESS R_Ip6ConfigGateway
> +set L_UnitLen [Sizeof EFI_IPv6_ADDRESS]
> +set L_ListLen [expr {$L_UnitLen * $L_GatewayListLen}]
> +SetVar R_Ip6ConfigDataType $IP6CDT(Gateway)
> +SetVar R_Ip6ConfigDataSize $L_ListLen
> +
> +SetIpv6Address R_Temp_Ip6ConfigGateway "2002::5001"
> +SetVar R_Ip6ConfigGateway @R_Temp_Ip6ConfigGateway
> +
> +SetVar R_Context 0
> +BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context,\
> + &@R_DoneEvent, &@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "BS.CreateEvent." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.RegisterDataNotify - Register notification event for configuration." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigGateway,&@R_Status"
> +GetAck
> +GetVar R_Status
> +if { $R_Status == $EFI_SUCCESS } {
> + set assert pass
> + RecordAssertion $assert $Ip6ConfigSetDataFunc2AssertionGuid005 \
> + "Ip6Config.SetData - Call SetData to set Gateway." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +} elseif { $R_Status == $EFI_NOT_READY } {
> + set i 0
> + set L_TimeOut 30
> + while { 1 > 0 } {
> + GetVar R_Context
> + if { $R_Context == 1 } {
> + break
> + } elseif { $i == $L_TimeOut } {
> + set assert fail
> + RecordAssertion $assert $Ip6ConfigSetDataFunc2AssertionGuid005 \
> + "SetData to set Gateway fail.(event hasn't been signaled before TIMEOUT)." \
> + "TIMEOUT value is $L_TimeOut (sec), "
> +
> + SetVar R_Ip6ConfigDataType $IP6CDT(Gateway)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_SETDATA_FUNC2
> + EndLog
> + return
> + }
> + incr i
> + Stall 1
> + }
> +} else {
> + set assert fail
> + RecordAssertion $assert $Ip6ConfigSetDataFunc2AssertionGuid005 \
> + "Ip6Config.SetData - Call SetData to set Gateway." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> + SetVar R_Ip6ConfigDataType $IP6CDT(Gateway)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_SETDATA_FUNC2
> + EndLog
> + return
> +}
> +
> +SetVar R_Ip6ConfigDataType $IP6CDT(Gateway)
> +Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> +GetAck
> +BS->CloseEvent {@R_DoneEvent,&@R_Status}
> +GetAck
> +
> +Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigGateway,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.GetData - Call GetData to get Gateway." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +GetVar R_Ip6ConfigGateway
> +
> +set L_Proc_Ipv6Address [GetIpv6Address {R_Ip6ConfigGateway}]
> +if { [string compare $L_Proc_Ipv6Address 2002:0000:0000:0000:0000:0000:0000:5001] != 0 } {
> + puts $L_Proc_Ipv6Address
> + set assert fail
> +
> + RecordAssertion $assert $Ip6ConfigSetDataFunc2AssertionGuid006 \
> + "Ip6Config.SetData - Set Gateway fail(event is signaled correctly but data is incorrect.)"
> +} else {
> +
> + RecordAssertion $assert $Ip6ConfigSetDataFunc2AssertionGuid006 \
> + "Ip6Config.SetData - Set Gateway success(event is signaled correctly and data is correct.)"
> +}
> +
> +#
> +# Clear the Gateway
> +#
> +SetVar R_Context 0
> +BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context,\
> + &@R_DoneEvent, &@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "BS.CreateEvent." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.RegisterDataNotify - Register notification event for configuration." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +Ip6Config->SetData "@R_Ip6ConfigDataType,0,NULL,&@R_Status"
> +GetAck
> +GetVar R_Status
> +if { $R_Status == $EFI_SUCCESS } {
> + set assert pass
> + RecordAssertion $assert $Ip6ConfigSetDataFunc2AssertionGuid007 \
> + "Ip6Config.SetData - Call SetData to clear Gateway." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +} elseif { $R_Status == $EFI_NOT_READY } {
> + set i 0
> + set L_TimeOut 30
> + while { 1 > 0 } {
> + GetVar R_Context
> + if { $R_Context == 1 } {
> + break
> + } elseif { $i == $L_TimeOut } {
> + set assert fail
> + RecordAssertion $assert $Ip6ConfigSetDataFunc2AssertionGuid007 \
> + "SetData to clear Gateway fail.(event hasn't been signaled before TIMEOUT)." \
> + "TIMEOUT value is $L_TimeOut (sec), "
> +
> + SetVar R_Ip6ConfigDataType $IP6CDT(Gateway)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_SETDATA_FUNC2
> + EndLog
> + return
> + }
> + incr i
> + Stall 1
> + }
> +} else {
> + set assert fail
> + RecordAssertion $assert $Ip6ConfigSetDataFunc2AssertionGuid007 \
> + "Ip6Config.SetData - Call SetData to clear Gateway." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> + SetVar R_Ip6ConfigDataType $IP6CDT(Gateway)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_SETDATA_FUNC2
> + EndLog
> + return
> +}
> +
> +SetVar R_Ip6ConfigDataType $IP6CDT(Gateway)
> +Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> +GetAck
> +BS->CloseEvent {@R_DoneEvent,&@R_Status}
> +GetAck
> +
> +Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigGateway,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_NOT_FOUND]
> +RecordAssertion $assert $Ip6ConfigSetDataFunc2AssertionGuid008 \
> + "Ip6Config.GetData - Call GetData to get Gateway." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_NOT_FOUND"
> +
> +
> +#
> +# Check Point : Set DnsServer with valid parameter
> +#
> +
> +set L_DnsServerListLen 1
> +EFI_IPv6_ADDRESS R_Temp_Ip6ConfigDnsServer
> +EFI_IPv6_ADDRESS R_Ip6ConfigDnsServer
> +set L_UnitLen [Sizeof EFI_IPv6_ADDRESS]
> +set L_ListLen [expr {$L_UnitLen * $L_DnsServerListLen}]
> +SetVar R_Ip6ConfigDataType $IP6CDT(DnsServer)
> +SetVar R_Ip6ConfigDataSize $L_ListLen
> +
> +SetIpv6Address R_Temp_Ip6ConfigDnsServer "2002::5002"
> +SetVar R_Ip6ConfigDnsServer @R_Temp_Ip6ConfigDnsServer
> +
> +SetVar R_Context 0
> +BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context,\
> + &@R_DoneEvent, &@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "BS.CreateEvent." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.RegisterDataNotify - Register notification event for configuration." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigDnsServer,&@R_Status"
> +GetAck
> +GetVar R_Status
> +if { $R_Status == $EFI_SUCCESS } {
> + set assert pass
> + RecordAssertion $assert $Ip6ConfigSetDataFunc2AssertionGuid009 \
> + "Ip6Config.SetData - Call SetData to set DnsServer." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +} elseif { $R_Status == $EFI_NOT_READY } {
> + set i 0
> + set L_TimeOut 30
> + while { 1 > 0 } {
> + GetVar R_Context
> + if { $R_Context == 1 } {
> + break
> + } elseif { $i == $L_TimeOut } {
> + set assert fail
> + RecordAssertion $assert $Ip6ConfigSetDataFunc2AssertionGuid009 \
> + "SetData to set DnsServer fail.(event hasn't been signaled before TIMEOUT)." \
> + "TIMEOUT value is $L_TimeOut (sec), "
> +
> + SetVar R_Ip6ConfigDataType $IP6CDT(DnsServer)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_SETDATA_FUNC2
> + EndLog
> + return
> + }
> + incr i
> + Stall 1
> + }
> +} else {
> + set assert fail
> + RecordAssertion $assert $Ip6ConfigSetDataFunc2AssertionGuid009 \
> + "Ip6Config.SetData - Call SetData to set DnsServer." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> + SetVar R_Ip6ConfigDataType $IP6CDT(DnsServer)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_SETDATA_FUNC2
> + EndLog
> + return
> +}
> +
> +SetVar R_Ip6ConfigDataType $IP6CDT(DnsServer)
> +Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> +GetAck
> +BS->CloseEvent {@R_DoneEvent,&@R_Status}
> +GetAck
> +
> +Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigDnsServer,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.GetData - Call GetData to get DnsServer." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +GetVar R_Ip6ConfigDnsServer
> +
> +set L_Proc_Ipv6Address [GetIpv6Address {R_Ip6ConfigDnsServer}]
> +if { [string compare $L_Proc_Ipv6Address 2002:0000:0000:0000:0000:0000:0000:5002] != 0 } {
> + set assert fail
> +
> + RecordAssertion $assert $Ip6ConfigSetDataFunc2AssertionGuid010 \
> + "Ip6Config.SetData - Set DnsServer fail(event is signaled correctly but data is incorrect.)"
> +} else {
> + RecordAssertion $assert $Ip6ConfigSetDataFunc2AssertionGuid010 \
> + "Ip6Config.SetData - Set DnsServer success(event is signaled correctly and data is correct.)"
> +}
> +
> +#
> +# Clear the DnsServer
> +#
> +SetVar R_Context 0
> +BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context,\
> + &@R_DoneEvent, &@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "BS.CreateEvent." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.RegisterDataNotify - Register notification event for configuration." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +Ip6Config->SetData "@R_Ip6ConfigDataType,0,NULL,&@R_Status"
> +GetAck
> +GetVar R_Status
> +if { $R_Status == $EFI_SUCCESS } {
> + set assert pass
> + RecordAssertion $assert $Ip6ConfigSetDataFunc2AssertionGuid011 \
> + "Ip6Config.SetData - Call SetData to clear DnsServer." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +} elseif { $R_Status == $EFI_NOT_READY } {
> + set i 0
> + set L_TimeOut 30
> + while { 1 > 0 } {
> + GetVar R_Context
> + if { $R_Context == 1 } {
> + break
> + } elseif { $i == $L_TimeOut } {
> + set assert fail
> + RecordAssertion $assert $Ip6ConfigSetDataFunc2AssertionGuid011 \
> + "SetData to clear DnsServer fail.(event hasn't been signaled before TIMEOUT)." \
> + "TIMEOUT value is $L_TimeOut (sec), "
> +
> + SetVar R_Ip6ConfigDataType $IP6CDT(DnsServer)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_SETDATA_FUNC2
> + EndLog
> + return
> + }
> + incr i
> + Stall 1
> + }
> +} else {
> + set assert fail
> + RecordAssertion $assert $Ip6ConfigSetDataFunc2AssertionGuid011 \
> + "Ip6Config.SetData - Call SetData to clear DnsServer." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> + SetVar R_Ip6ConfigDataType $IP6CDT(DnsServer)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_SETDATA_FUNC2
> + EndLog
> + return
> +}
> +
> +SetVar R_Ip6ConfigDataType $IP6CDT(DnsServer)
> +Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> +GetAck
> +BS->CloseEvent {@R_DoneEvent,&@R_Status}
> +GetAck
> +
> +Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigDnsServer,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_NOT_FOUND]
> +RecordAssertion $assert $Ip6ConfigSetDataFunc2AssertionGuid012 \
> + "Ip6Config.GetData - Call GetData to get DnsServer." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_NOT_FOUND"
> +
> +
> +EndScope _IP6CONFIG_SETDATA_FUNC2
> +
> +EndLog
> \ No newline at end of file
> diff --git a/uefi-sct/EMS/Bin/TestCase/IP6Config/UnregisterDataNotify.Conf1.Case1.tcl b/uefi-sct/EMS/Bin/TestCase/IP6Config/UnregisterDataNotify.Conf1.Case1.tcl
> index a36469f..35b36ce 100644
> --- a/uefi-sct/EMS/Bin/TestCase/IP6Config/UnregisterDataNotify.Conf1.Case1.tcl
> +++ b/uefi-sct/EMS/Bin/TestCase/IP6Config/UnregisterDataNotify.Conf1.Case1.tcl
> @@ -1,90 +1,90 @@
> -#
> -# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
> -# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
> -#
> -# This program and the accompanying materials
> -# are licensed and made available under the terms and conditions of the BSD License
> -# which accompanies this distribution. The full text of the license may be found at
> -# http://opensource.org/licenses/bsd-license.php
> -#
> -# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> -# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
> -#
> -################################################################################
> -CaseLevel CONFORMANCE
> -CaseAttribute AUTO
> -CaseVerboseLevel DEFAULT
> -set reportfile report.csv
> -
> -#
> -# test case Name, category, description, GUID...
> -#
> -CaseGuid 8B7B6AA6-2DCB-434b-9533-6346ABCC686D
> -CaseName UnregisterDataNotify.Conf1.Case1
> -CaseCategory IP6Config
> -CaseDescription {UnregisterDataNotify must not succeed when event is NULL.}
> -
> -################################################################################
> -Include IP6Config/Include/Ip6Config.inc.tcl
> -
> -
> -#
> -# Begin log ...
> -#
> -BeginLog
> -
> -#
> -# BeginScope
> -#
> -BeginScope _IP6CONFIG_UNREGISTERDATANOTIFY_CONF1
> -
> -#
> -# Parameter Definition
> -# R_ represents "Remote EFI Side Parameter"
> -# L_ represents "Local ENTS Side Parameter"
> -#
> -UINTN R_Status
> -UINTN R_Context
> -UINTN R_DoneEvent
> -UINTN R_Ip6ConfigDataSize
> -UINT32 R_Ip6ConfigDataType
> -EFI_IP6_CONFIG_INTERFACE_INFO R_Ip6ConfigInterfaceInfo
> -EFI_IP6_CONFIG_INTERFACE_ID R_Ip6ConfigInterfaceId
> -UINT32 R_Ip6ConfigPolicy
> -EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS R_Ip6ConfigDadTransmits
> -
> -#
> -# Check Point: Call Ip6Config->SetData to set manual policy
> -#
> -SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> -SetVar R_Ip6ConfigDataSize [Sizeof UINT32]
> -SetVar R_Ip6ConfigPolicy $IP6CP(Manual)
> -
> -SetVar R_Context 0
> -BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context,\
> - &@R_DoneEvent, &@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "BS.CreateEvent." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -#
> -# Check Point: Call Ip6Config->UnregisterDataNotify with the event NULL
> -#
> -Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType, 0 ,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_INVALID_PARAMETER]
> -RecordAssertion $assert $Ip6ConfigUnregisterDataNotifyConf1AssertionGuid001 \
> - "Ip6Config.UnregisterDataNotify - Unregister notification event with the event NULL." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_INVALID_PARAMETER"
> -
> -#
> -# Clean up
> -#
> -BS->CloseEvent {@R_DoneEvent,&@R_Status}
> -GetAck
> -
> -EndScope _IP6CONFIG_UNREGISTERDATANOTIFY_CONF1
> -
> +#
> +# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
> +# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
> +#
> +# This program and the accompanying materials
> +# are licensed and made available under the terms and conditions of the BSD License
> +# which accompanies this distribution. The full text of the license may be found at
> +# http://opensource.org/licenses/bsd-license.php
> +#
> +# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> +# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
> +#
> +################################################################################
> +CaseLevel CONFORMANCE
> +CaseAttribute AUTO
> +CaseVerboseLevel DEFAULT
> +set reportfile report.csv
> +
> +#
> +# test case Name, category, description, GUID...
> +#
> +CaseGuid 8B7B6AA6-2DCB-434b-9533-6346ABCC686D
> +CaseName UnregisterDataNotify.Conf1.Case1
> +CaseCategory IP6Config
> +CaseDescription {UnregisterDataNotify must not succeed when event is NULL.}
> +
> +################################################################################
> +Include IP6Config/Include/Ip6Config.inc.tcl
> +
> +
> +#
> +# Begin log ...
> +#
> +BeginLog
> +
> +#
> +# BeginScope
> +#
> +BeginScope _IP6CONFIG_UNREGISTERDATANOTIFY_CONF1
> +
> +#
> +# Parameter Definition
> +# R_ represents "Remote EFI Side Parameter"
> +# L_ represents "Local ENTS Side Parameter"
> +#
> +UINTN R_Status
> +UINTN R_Context
> +UINTN R_DoneEvent
> +UINTN R_Ip6ConfigDataSize
> +UINT32 R_Ip6ConfigDataType
> +EFI_IP6_CONFIG_INTERFACE_INFO R_Ip6ConfigInterfaceInfo
> +EFI_IP6_CONFIG_INTERFACE_ID R_Ip6ConfigInterfaceId
> +UINT32 R_Ip6ConfigPolicy
> +EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS R_Ip6ConfigDadTransmits
> +
> +#
> +# Check Point: Call Ip6Config->SetData to set manual policy
> +#
> +SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> +SetVar R_Ip6ConfigDataSize [Sizeof UINT32]
> +SetVar R_Ip6ConfigPolicy $IP6CP(Manual)
> +
> +SetVar R_Context 0
> +BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context,\
> + &@R_DoneEvent, &@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "BS.CreateEvent." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +#
> +# Check Point: Call Ip6Config->UnregisterDataNotify with the event NULL
> +#
> +Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType, 0 ,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_INVALID_PARAMETER]
> +RecordAssertion $assert $Ip6ConfigUnregisterDataNotifyConf1AssertionGuid001 \
> + "Ip6Config.UnregisterDataNotify - Unregister notification event with the event NULL." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_INVALID_PARAMETER"
> +
> +#
> +# Clean up
> +#
> +BS->CloseEvent {@R_DoneEvent,&@R_Status}
> +GetAck
> +
> +EndScope _IP6CONFIG_UNREGISTERDATANOTIFY_CONF1
> +
> EndLog
> \ No newline at end of file
> diff --git a/uefi-sct/EMS/Bin/TestCase/IP6Config/UnregisterDataNotify.Conf2.Case1.tcl b/uefi-sct/EMS/Bin/TestCase/IP6Config/UnregisterDataNotify.Conf2.Case1.tcl
> index d41f141..7eb5808 100644
> --- a/uefi-sct/EMS/Bin/TestCase/IP6Config/UnregisterDataNotify.Conf2.Case1.tcl
> +++ b/uefi-sct/EMS/Bin/TestCase/IP6Config/UnregisterDataNotify.Conf2.Case1.tcl
> @@ -1,83 +1,83 @@
> -#
> -# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
> -# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
> -#
> -# This program and the accompanying materials
> -# are licensed and made available under the terms and conditions of the BSD License
> -# which accompanies this distribution. The full text of the license may be found at
> -# http://opensource.org/licenses/bsd-license.php
> -#
> -# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> -# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
> -#
> -################################################################################
> -CaseLevel CONFORMANCE
> -CaseAttribute AUTO
> -CaseVerboseLevel DEFAULT
> -set reportfile report.csv
> -
> -#
> -# test case Name, category, description, GUID...
> -#
> -CaseGuid 9CE66A42-FADC-4d44-B577-B58CED8E984B
> -CaseName UnregisterDataNotify.Conf2.Case1
> -CaseCategory IP6Config
> -CaseDescription {UnregisterDataNotify must not succeed when then event has not been registered for the data type ever.}
> -
> -################################################################################
> -Include IP6Config/Include/Ip6Config.inc.tcl
> -
> -
> -#
> -# Begin log ...
> -#
> -BeginLog
> -
> -#
> -# BeginScope
> -#
> -BeginScope _IP6CONFIG_UNREGISTERDATANOTIFY_CONF2_CASE1
> -
> -#
> -# Parameter Definition
> -# R_ represents "Remote EFI Side Parameter"
> -# L_ represents "Local ENTS Side Parameter"
> -#
> -UINTN R_Status
> -UINTN R_Context
> -UINTN R_DoneEvent
> -UINTN R_Ip6ConfigDataSize
> -UINT32 R_Ip6ConfigDataType
> -
> -#
> -# Check Point: Call Ip6Config->UnregisterDataNotify with the event not registered
> -#
> -
> -SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
> -SetVar R_Ip6ConfigDataSize [Sizeof EFI_IP6_CONFIG_MANUAL_ADDRESS]
> -
> -SetVar R_Context 0
> -BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context,\
> - &@R_DoneEvent, &@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "BS.CreateEvent." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType, @R_DoneEvent ,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_NOT_FOUND]
> -RecordAssertion $assert $Ip6ConfigUnregisterDataNotifyConf2AssertionGuid001 \
> - "Ip6Config.UnregisterDataNotify - Unregister notification event with the event not registered." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_NOT_FOUND"
> -
> -#
> -# Clean up
> -#
> -BS->CloseEvent {@R_DoneEvent,&@R_Status}
> -GetAck
> -
> -EndScope _IP6CONFIG_UNREGISTERDATANOTIFY_CONF2_CASE1
> -
> +#
> +# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
> +# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
> +#
> +# This program and the accompanying materials
> +# are licensed and made available under the terms and conditions of the BSD License
> +# which accompanies this distribution. The full text of the license may be found at
> +# http://opensource.org/licenses/bsd-license.php
> +#
> +# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> +# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
> +#
> +################################################################################
> +CaseLevel CONFORMANCE
> +CaseAttribute AUTO
> +CaseVerboseLevel DEFAULT
> +set reportfile report.csv
> +
> +#
> +# test case Name, category, description, GUID...
> +#
> +CaseGuid 9CE66A42-FADC-4d44-B577-B58CED8E984B
> +CaseName UnregisterDataNotify.Conf2.Case1
> +CaseCategory IP6Config
> +CaseDescription {UnregisterDataNotify must not succeed when then event has not been registered for the data type ever.}
> +
> +################################################################################
> +Include IP6Config/Include/Ip6Config.inc.tcl
> +
> +
> +#
> +# Begin log ...
> +#
> +BeginLog
> +
> +#
> +# BeginScope
> +#
> +BeginScope _IP6CONFIG_UNREGISTERDATANOTIFY_CONF2_CASE1
> +
> +#
> +# Parameter Definition
> +# R_ represents "Remote EFI Side Parameter"
> +# L_ represents "Local ENTS Side Parameter"
> +#
> +UINTN R_Status
> +UINTN R_Context
> +UINTN R_DoneEvent
> +UINTN R_Ip6ConfigDataSize
> +UINT32 R_Ip6ConfigDataType
> +
> +#
> +# Check Point: Call Ip6Config->UnregisterDataNotify with the event not registered
> +#
> +
> +SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
> +SetVar R_Ip6ConfigDataSize [Sizeof EFI_IP6_CONFIG_MANUAL_ADDRESS]
> +
> +SetVar R_Context 0
> +BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context,\
> + &@R_DoneEvent, &@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "BS.CreateEvent." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType, @R_DoneEvent ,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_NOT_FOUND]
> +RecordAssertion $assert $Ip6ConfigUnregisterDataNotifyConf2AssertionGuid001 \
> + "Ip6Config.UnregisterDataNotify - Unregister notification event with the event not registered." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_NOT_FOUND"
> +
> +#
> +# Clean up
> +#
> +BS->CloseEvent {@R_DoneEvent,&@R_Status}
> +GetAck
> +
> +EndScope _IP6CONFIG_UNREGISTERDATANOTIFY_CONF2_CASE1
> +
> EndLog
> \ No newline at end of file
> diff --git a/uefi-sct/EMS/Bin/TestCase/IP6Config/UnregisterDataNotify.Conf2.Case2.tcl b/uefi-sct/EMS/Bin/TestCase/IP6Config/UnregisterDataNotify.Conf2.Case2.tcl
> index 5608dbe..e56d26a 100644
> --- a/uefi-sct/EMS/Bin/TestCase/IP6Config/UnregisterDataNotify.Conf2.Case2.tcl
> +++ b/uefi-sct/EMS/Bin/TestCase/IP6Config/UnregisterDataNotify.Conf2.Case2.tcl
> @@ -1,99 +1,99 @@
> -#
> -# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
> -# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
> -#
> -# This program and the accompanying materials
> -# are licensed and made available under the terms and conditions of the BSD License
> -# which accompanies this distribution. The full text of the license may be found at
> -# http://opensource.org/licenses/bsd-license.php
> -#
> -# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> -# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
> -#
> -################################################################################
> -CaseLevel CONFORMANCE
> -CaseAttribute AUTO
> -CaseVerboseLevel DEFAULT
> -set reportfile report.csv
> -
> -#
> -# test case Name, category, description, GUID...
> -#
> -CaseGuid EB679CF9-9A56-4a9f-B5CF-2D845B044560
> -CaseName UnregisterDataNotify.Conf2.Case2
> -CaseCategory IP6Config
> -CaseDescription {UnregisterDataNotify must not succeed when the event was registered and then unregistered for the data type.}
> -
> -################################################################################
> -Include IP6Config/Include/Ip6Config.inc.tcl
> -
> -
> -#
> -# Begin log ...
> -#
> -BeginLog
> -
> -#
> -# BeginScope
> -#
> -BeginScope _IP6CONFIG_UNREGISTERDATANOTIFY_CONF2_CASE2
> -
> -#
> -# Parameter Definition
> -# R_ represents "Remote EFI Side Parameter"
> -# L_ represents "Local ENTS Side Parameter"
> -#
> -UINTN R_Status
> -UINTN R_Context
> -UINTN R_DoneEvent
> -UINTN R_Ip6ConfigDataSize
> -UINT32 R_Ip6ConfigDataType
> -
> -#
> -# Check Point: Register event for Datatype - ManualAddress and then unregister it
> -#
> -SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
> -SetVar R_Ip6ConfigDataSize [Sizeof EFI_IP6_CONFIG_MANUAL_ADDRESS]
> -
> -SetVar R_Context 0
> -BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context,\
> - &@R_DoneEvent, &@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "BS.CreateEvent." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.RegisterDataNotify - Register notification event for configuration." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType, @R_DoneEvent ,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.UnregisterDataNotify - Unregister notification event with correct parameters." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -#
> -# Check Point: Unregister the event again
> -#
> -Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType, @R_DoneEvent ,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_NOT_FOUND]
> -RecordAssertion $assert $Ip6ConfigUnregisterDataNotifyConf2AssertionGuid002 \
> - "Ip6Config.UnregisterDataNotify - Unregister notification event with the event has been unregistered." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_NOT_FOUND"
> -
> -#
> -# Clean up
> -#
> -BS->CloseEvent {@R_DoneEvent,&@R_Status}
> -GetAck
> -
> -EndScope _IP6CONFIG_UNREGISTERDATANOTIFY_CONF2_CASE2
> -
> +#
> +# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
> +# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
> +#
> +# This program and the accompanying materials
> +# are licensed and made available under the terms and conditions of the BSD License
> +# which accompanies this distribution. The full text of the license may be found at
> +# http://opensource.org/licenses/bsd-license.php
> +#
> +# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> +# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
> +#
> +################################################################################
> +CaseLevel CONFORMANCE
> +CaseAttribute AUTO
> +CaseVerboseLevel DEFAULT
> +set reportfile report.csv
> +
> +#
> +# test case Name, category, description, GUID...
> +#
> +CaseGuid EB679CF9-9A56-4a9f-B5CF-2D845B044560
> +CaseName UnregisterDataNotify.Conf2.Case2
> +CaseCategory IP6Config
> +CaseDescription {UnregisterDataNotify must not succeed when the event was registered and then unregistered for the data type.}
> +
> +################################################################################
> +Include IP6Config/Include/Ip6Config.inc.tcl
> +
> +
> +#
> +# Begin log ...
> +#
> +BeginLog
> +
> +#
> +# BeginScope
> +#
> +BeginScope _IP6CONFIG_UNREGISTERDATANOTIFY_CONF2_CASE2
> +
> +#
> +# Parameter Definition
> +# R_ represents "Remote EFI Side Parameter"
> +# L_ represents "Local ENTS Side Parameter"
> +#
> +UINTN R_Status
> +UINTN R_Context
> +UINTN R_DoneEvent
> +UINTN R_Ip6ConfigDataSize
> +UINT32 R_Ip6ConfigDataType
> +
> +#
> +# Check Point: Register event for Datatype - ManualAddress and then unregister it
> +#
> +SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
> +SetVar R_Ip6ConfigDataSize [Sizeof EFI_IP6_CONFIG_MANUAL_ADDRESS]
> +
> +SetVar R_Context 0
> +BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context,\
> + &@R_DoneEvent, &@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "BS.CreateEvent." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.RegisterDataNotify - Register notification event for configuration." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType, @R_DoneEvent ,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.UnregisterDataNotify - Unregister notification event with correct parameters." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +#
> +# Check Point: Unregister the event again
> +#
> +Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType, @R_DoneEvent ,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_NOT_FOUND]
> +RecordAssertion $assert $Ip6ConfigUnregisterDataNotifyConf2AssertionGuid002 \
> + "Ip6Config.UnregisterDataNotify - Unregister notification event with the event has been unregistered." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_NOT_FOUND"
> +
> +#
> +# Clean up
> +#
> +BS->CloseEvent {@R_DoneEvent,&@R_Status}
> +GetAck
> +
> +EndScope _IP6CONFIG_UNREGISTERDATANOTIFY_CONF2_CASE2
> +
> EndLog
> \ No newline at end of file
> diff --git a/uefi-sct/EMS/Bin/TestCase/IP6Config/UnregisterDataNotify.Func1.Case1.tcl b/uefi-sct/EMS/Bin/TestCase/IP6Config/UnregisterDataNotify.Func1.Case1.tcl
> index 5b88510..6315fa7 100644
> --- a/uefi-sct/EMS/Bin/TestCase/IP6Config/UnregisterDataNotify.Func1.Case1.tcl
> +++ b/uefi-sct/EMS/Bin/TestCase/IP6Config/UnregisterDataNotify.Func1.Case1.tcl
> @@ -1,98 +1,98 @@
> -#
> -# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
> -# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
> -#
> -# This program and the accompanying materials
> -# are licensed and made available under the terms and conditions of the BSD License
> -# which accompanies this distribution. The full text of the license may be found at
> -# http://opensource.org/licenses/bsd-license.php
> -#
> -# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> -# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
> -#
> -################################################################################
> -CaseLevel FUNCTION
> -CaseAttribute AUTO
> -CaseVerboseLevel DEFAULT
> -set reportfile report.csv
> -
> -#
> -# test case Name, category, description, GUID...
> -#
> -CaseGuid 769658B4-3397-4367-8E10-C4513407FFB8
> -CaseName UnregisterDataNotify.Func1.Case1
> -CaseCategory IP6Config
> -CaseDescription {UnregisterDataNotify must succeed with valid parameters when handling signal datatype.}
> -
> -################################################################################
> -Include IP6Config/Include/Ip6Config.inc.tcl
> -
> -
> -#
> -# Begin log ...
> -#
> -BeginLog
> -
> -#
> -# BeginScope
> -#
> -BeginScope _IP6CONFIG_UNREGISTERDATANOTIFY_FUNC1_CASE1
> -
> -#
> -# Parameter Definition
> -# R_ represents "Remote EFI Side Parameter"
> -# L_ represents "Local ENTS Side Parameter"
> -#
> -UINTN R_Status
> -UINTN R_Context
> -UINTN R_DoneEvent
> -UINTN R_Ip6ConfigDataSize
> -UINT32 R_Ip6ConfigDataType
> -EFI_IP6_CONFIG_INTERFACE_INFO R_Ip6ConfigInterfaceInfo
> -EFI_IP6_CONFIG_INTERFACE_ID R_Ip6ConfigInterfaceId
> -UINT32 R_Ip6ConfigPolicy
> -EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS R_Ip6ConfigDadTransmits
> -
> -#
> -# Create Event and RegisterDataNotify
> -#
> -SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> -SetVar R_Ip6ConfigDataSize [Sizeof UINT32]
> -SetVar R_Ip6ConfigPolicy $IP6CP(Manual)
> -
> -SetVar R_Context 0
> -BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context,\
> - &@R_DoneEvent, &@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "BS.CreateEvent." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType, @R_DoneEvent ,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "IfConfig6.RegisterDataNotify() with valid parameter." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -#
> -# Check Point : Call Ip6Config->UnregisterDataNotify with valid parameter
> -#
> -SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> -Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $Ip6ConfigUnregisterDataNotifyFunc1AssertionGuid001 \
> - "Ip6Config.UnregisterDataNotify - Unregister notification event for configuration." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -#
> -# Close event
> -#
> -BS->CloseEvent {@R_DoneEvent,&@R_Status}
> -GetAck
> -
> -EndScope _IP6CONFIG_UNREGISTERDATANOTIFY_FUNC1_CASE1
> -
> +#
> +# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
> +# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
> +#
> +# This program and the accompanying materials
> +# are licensed and made available under the terms and conditions of the BSD License
> +# which accompanies this distribution. The full text of the license may be found at
> +# http://opensource.org/licenses/bsd-license.php
> +#
> +# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> +# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
> +#
> +################################################################################
> +CaseLevel FUNCTION
> +CaseAttribute AUTO
> +CaseVerboseLevel DEFAULT
> +set reportfile report.csv
> +
> +#
> +# test case Name, category, description, GUID...
> +#
> +CaseGuid 769658B4-3397-4367-8E10-C4513407FFB8
> +CaseName UnregisterDataNotify.Func1.Case1
> +CaseCategory IP6Config
> +CaseDescription {UnregisterDataNotify must succeed with valid parameters when handling signal datatype.}
> +
> +################################################################################
> +Include IP6Config/Include/Ip6Config.inc.tcl
> +
> +
> +#
> +# Begin log ...
> +#
> +BeginLog
> +
> +#
> +# BeginScope
> +#
> +BeginScope _IP6CONFIG_UNREGISTERDATANOTIFY_FUNC1_CASE1
> +
> +#
> +# Parameter Definition
> +# R_ represents "Remote EFI Side Parameter"
> +# L_ represents "Local ENTS Side Parameter"
> +#
> +UINTN R_Status
> +UINTN R_Context
> +UINTN R_DoneEvent
> +UINTN R_Ip6ConfigDataSize
> +UINT32 R_Ip6ConfigDataType
> +EFI_IP6_CONFIG_INTERFACE_INFO R_Ip6ConfigInterfaceInfo
> +EFI_IP6_CONFIG_INTERFACE_ID R_Ip6ConfigInterfaceId
> +UINT32 R_Ip6ConfigPolicy
> +EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS R_Ip6ConfigDadTransmits
> +
> +#
> +# Create Event and RegisterDataNotify
> +#
> +SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> +SetVar R_Ip6ConfigDataSize [Sizeof UINT32]
> +SetVar R_Ip6ConfigPolicy $IP6CP(Manual)
> +
> +SetVar R_Context 0
> +BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context,\
> + &@R_DoneEvent, &@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "BS.CreateEvent." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType, @R_DoneEvent ,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "IfConfig6.RegisterDataNotify() with valid parameter." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +#
> +# Check Point : Call Ip6Config->UnregisterDataNotify with valid parameter
> +#
> +SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> +Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $Ip6ConfigUnregisterDataNotifyFunc1AssertionGuid001 \
> + "Ip6Config.UnregisterDataNotify - Unregister notification event for configuration." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +#
> +# Close event
> +#
> +BS->CloseEvent {@R_DoneEvent,&@R_Status}
> +GetAck
> +
> +EndScope _IP6CONFIG_UNREGISTERDATANOTIFY_FUNC1_CASE1
> +
> EndLog
> \ No newline at end of file
> diff --git a/uefi-sct/EMS/Bin/TestCase/IP6Config/UnregisterDataNotify.Func1.Case2.tcl b/uefi-sct/EMS/Bin/TestCase/IP6Config/UnregisterDataNotify.Func1.Case2.tcl
> index 9f30136..cf1a374 100644
> --- a/uefi-sct/EMS/Bin/TestCase/IP6Config/UnregisterDataNotify.Func1.Case2.tcl
> +++ b/uefi-sct/EMS/Bin/TestCase/IP6Config/UnregisterDataNotify.Func1.Case2.tcl
> @@ -1,237 +1,237 @@
> -#
> -# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
> -# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
> -#
> -# This program and the accompanying materials
> -# are licensed and made available under the terms and conditions of the BSD License
> -# which accompanies this distribution. The full text of the license may be found at
> -# http://opensource.org/licenses/bsd-license.php
> -#
> -# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> -# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
> -#
> -################################################################################
> -CaseLevel FUNCTION
> -CaseAttribute AUTO
> -CaseVerboseLevel DEFAULT
> -set reportfile report.csv
> -
> -#
> -# test case Name, category, description, GUID...
> -#
> -CaseGuid C206AA15-2F53-4860-BD78-453C4EA463B6
> -CaseName UnregisterDataNotify.Func1.Case2
> -CaseCategory IP6Config
> -CaseDescription {UnregisterDataNotify must succeed with valid parameters when handling multiple datatype.}
> -
> -################################################################################
> -Include IP6Config/Include/Ip6Config.inc.tcl
> -
> -
> -#
> -# Begin log ...
> -#
> -BeginLog
> -
> -#
> -# BeginScope
> -#
> -BeginScope _IP6CONFIG_UNREGISTERDATANOTIFY_FUNC1_CASE2
> -
> -#
> -# Parameter Definition
> -# R_ represents "Remote EFI Side Parameter"
> -# L_ represents "Local ENTS Side Parameter"
> -#
> -UINTN R_Status
> -UINTN R_Context
> -UINTN R_DoneEvent
> -UINTN R_Ip6ConfigDataSize
> -UINT32 R_Ip6ConfigDataType
> -EFI_IP6_CONFIG_INTERFACE_INFO R_Ip6ConfigInterfaceInfo
> -EFI_IP6_CONFIG_INTERFACE_ID R_Ip6ConfigInterfaceId
> -UINT32 R_Ip6ConfigPolicy
> -EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS R_Ip6ConfigDadTransmits
> -
> -#
> -# Check Point: Create Event and register it with data type [Policy] and [DadXmits]
> -#
> -SetVar R_Context 0
> -BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context,\
> - &@R_DoneEvent, &@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "BS.CreateEvent." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> -SetVar R_Ip6ConfigDataSize [Sizeof UINT32]
> -SetVar R_Ip6ConfigPolicy $IP6CP(Manual)
> -
> -Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.RegisterDataNotify - Register notification event for configuration." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> -SetVar R_Ip6ConfigDataSize [Sizeof EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS]
> -SetVar R_Ip6ConfigDadTransmits.DupAddrDetectTransmits 3
> -
> -Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.RegisterDataNotify - Register notification event for configuration." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -#
> -# Check Point: Unregister the event on Datatype [Policy]
> -#
> -SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> -SetVar R_Ip6ConfigDataSize [Sizeof UINT32]
> -SetVar R_Ip6ConfigPolicy $IP6CP(Manual)
> -
> -Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $Ip6ConfigUnregisterDataNotifyFunc1AssertionGuid002 \
> - "Ip6Config.UnregisterDataNotify - Unregister notification event for Datatype - Policy." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -#
> -# Check Point: Call Ip6Cofnig->SetData to set [Policy] and check whether the event is signaled.
> -#
> -SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> -SetVar R_Ip6ConfigDataSize [Sizeof UINT32]
> -SetVar R_Ip6ConfigPolicy $IP6CP(Manual)
> -
> -GetVar R_Context
> -set L_Context1 $R_Context
> -set L_Context2 $L_Context1
> -
> -Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_Status"
> -GetAck
> -GetVar R_Status
> -if { $R_Status == $EFI_SUCCESS } {
> - Stall 5
> - GetVar R_Context
> - if { $R_Context == $L_Context2 } {
> - set assert pass
> - } else {
> - set assert fail
> - }
> - RecordAssertion $assert $Ip6ConfigRegisterDataNotifyFunc1AssertionGuid003 \
> - "Ip6Config.UnregisterDataNotify - Event should not be signaled for DataType - Policy."
> -} else {
> - set assert fail
> -
> - RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.SetData - Call SetData to set manual policy." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> - SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - EndScope _IP6CONFIG_UNREGISTERDATANOTIFY_FUNC1_CASE2
> - EndLog
> - return
> -}
> -
> -#
> -# Check Point: Call Ip6Config->SetData to set [DadXmits] and check whether the event is signaled.
> -#
> -SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> -SetVar R_Ip6ConfigDataSize [Sizeof EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS]
> -SetVar R_Ip6ConfigDadTransmits.DupAddrDetectTransmits 3
> -
> -GetVar R_Context
> -set L_Context1 $R_Context
> -set L_Context2 [expr { $L_Context1 + 1 }]
> -
> -Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigDadTransmits,&@R_Status"
> -GetAck
> -GetVar R_Status
> -
> -if { $R_Status == $EFI_SUCCESS } {
> - set assert pass
> - RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.SetData - Call SetData to set DadXmits." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -} elseif { $R_Status == $EFI_NOT_READY } {
> - set i 0
> - set L_TimeOut 30
> - while { 1 > 0 } {
> - GetVar R_Context
> - if { $R_Context == $L_Context2 } {
> - break
> - } elseif { $i == $L_TimeOut } {
> - set assert fail
> - RecordAssertion $assert $GenericAssertionGuid \
> - "SetData failed.(event hasn't been signaled before TIMEOUT)." \
> - "TIMEOUT value is $L_TimeOut (sec), "
> -
> - SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - EndScope _IP6CONFIG_UNREGISTERDATANOTIFY_FUNC1_CASE2
> - EndLog
> - return
> - }
> - incr i
> - Stall 1
> - }
> -} else {
> - set assert fail
> - RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.SetData - Call SetData to set DadXmits." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> - SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - EndScope _IP6CONFIG_UNREGISTERDATANOTIFY_FUNC1_CASE2
> - EndLog
> - return
> -}
> -
> -GetVar R_Context
> -if { $R_Context == $L_Context2 } {
> - set assert pass
> -} else {
> - set assert fail
> -}
> -RecordAssertion $assert $Ip6ConfigRegisterDataNotifyFunc1AssertionGuid004 \
> - "Ip6Config.RegisterDataNotify - Event should be signaled for DataType - DadXmits."
> -
> -#
> -# Clean up
> -#
> -SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> -Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.UnregisterDataNotify - Unregister notification event for configuration." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -BS->CloseEvent {@R_DoneEvent,&@R_Status}
> -GetAck
> -
> -EndScope _IP6CONFIG_UNREGISTERDATANOTIFY_FUNC1_CASE2
> -
> +#
> +# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
> +# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
> +#
> +# This program and the accompanying materials
> +# are licensed and made available under the terms and conditions of the BSD License
> +# which accompanies this distribution. The full text of the license may be found at
> +# http://opensource.org/licenses/bsd-license.php
> +#
> +# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> +# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
> +#
> +################################################################################
> +CaseLevel FUNCTION
> +CaseAttribute AUTO
> +CaseVerboseLevel DEFAULT
> +set reportfile report.csv
> +
> +#
> +# test case Name, category, description, GUID...
> +#
> +CaseGuid C206AA15-2F53-4860-BD78-453C4EA463B6
> +CaseName UnregisterDataNotify.Func1.Case2
> +CaseCategory IP6Config
> +CaseDescription {UnregisterDataNotify must succeed with valid parameters when handling multiple datatype.}
> +
> +################################################################################
> +Include IP6Config/Include/Ip6Config.inc.tcl
> +
> +
> +#
> +# Begin log ...
> +#
> +BeginLog
> +
> +#
> +# BeginScope
> +#
> +BeginScope _IP6CONFIG_UNREGISTERDATANOTIFY_FUNC1_CASE2
> +
> +#
> +# Parameter Definition
> +# R_ represents "Remote EFI Side Parameter"
> +# L_ represents "Local ENTS Side Parameter"
> +#
> +UINTN R_Status
> +UINTN R_Context
> +UINTN R_DoneEvent
> +UINTN R_Ip6ConfigDataSize
> +UINT32 R_Ip6ConfigDataType
> +EFI_IP6_CONFIG_INTERFACE_INFO R_Ip6ConfigInterfaceInfo
> +EFI_IP6_CONFIG_INTERFACE_ID R_Ip6ConfigInterfaceId
> +UINT32 R_Ip6ConfigPolicy
> +EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS R_Ip6ConfigDadTransmits
> +
> +#
> +# Check Point: Create Event and register it with data type [Policy] and [DadXmits]
> +#
> +SetVar R_Context 0
> +BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context,\
> + &@R_DoneEvent, &@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "BS.CreateEvent." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> +SetVar R_Ip6ConfigDataSize [Sizeof UINT32]
> +SetVar R_Ip6ConfigPolicy $IP6CP(Manual)
> +
> +Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.RegisterDataNotify - Register notification event for configuration." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> +SetVar R_Ip6ConfigDataSize [Sizeof EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS]
> +SetVar R_Ip6ConfigDadTransmits.DupAddrDetectTransmits 3
> +
> +Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.RegisterDataNotify - Register notification event for configuration." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +#
> +# Check Point: Unregister the event on Datatype [Policy]
> +#
> +SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> +SetVar R_Ip6ConfigDataSize [Sizeof UINT32]
> +SetVar R_Ip6ConfigPolicy $IP6CP(Manual)
> +
> +Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $Ip6ConfigUnregisterDataNotifyFunc1AssertionGuid002 \
> + "Ip6Config.UnregisterDataNotify - Unregister notification event for Datatype - Policy." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +#
> +# Check Point: Call Ip6Cofnig->SetData to set [Policy] and check whether the event is signaled.
> +#
> +SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> +SetVar R_Ip6ConfigDataSize [Sizeof UINT32]
> +SetVar R_Ip6ConfigPolicy $IP6CP(Manual)
> +
> +GetVar R_Context
> +set L_Context1 $R_Context
> +set L_Context2 $L_Context1
> +
> +Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_Status"
> +GetAck
> +GetVar R_Status
> +if { $R_Status == $EFI_SUCCESS } {
> + Stall 5
> + GetVar R_Context
> + if { $R_Context == $L_Context2 } {
> + set assert pass
> + } else {
> + set assert fail
> + }
> + RecordAssertion $assert $Ip6ConfigRegisterDataNotifyFunc1AssertionGuid003 \
> + "Ip6Config.UnregisterDataNotify - Event should not be signaled for DataType - Policy."
> +} else {
> + set assert fail
> +
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.SetData - Call SetData to set manual policy." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> + SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_UNREGISTERDATANOTIFY_FUNC1_CASE2
> + EndLog
> + return
> +}
> +
> +#
> +# Check Point: Call Ip6Config->SetData to set [DadXmits] and check whether the event is signaled.
> +#
> +SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> +SetVar R_Ip6ConfigDataSize [Sizeof EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS]
> +SetVar R_Ip6ConfigDadTransmits.DupAddrDetectTransmits 3
> +
> +GetVar R_Context
> +set L_Context1 $R_Context
> +set L_Context2 [expr { $L_Context1 + 1 }]
> +
> +Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigDadTransmits,&@R_Status"
> +GetAck
> +GetVar R_Status
> +
> +if { $R_Status == $EFI_SUCCESS } {
> + set assert pass
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.SetData - Call SetData to set DadXmits." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +} elseif { $R_Status == $EFI_NOT_READY } {
> + set i 0
> + set L_TimeOut 30
> + while { 1 > 0 } {
> + GetVar R_Context
> + if { $R_Context == $L_Context2 } {
> + break
> + } elseif { $i == $L_TimeOut } {
> + set assert fail
> + RecordAssertion $assert $GenericAssertionGuid \
> + "SetData failed.(event hasn't been signaled before TIMEOUT)." \
> + "TIMEOUT value is $L_TimeOut (sec), "
> +
> + SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_UNREGISTERDATANOTIFY_FUNC1_CASE2
> + EndLog
> + return
> + }
> + incr i
> + Stall 1
> + }
> +} else {
> + set assert fail
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.SetData - Call SetData to set DadXmits." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> + SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_UNREGISTERDATANOTIFY_FUNC1_CASE2
> + EndLog
> + return
> +}
> +
> +GetVar R_Context
> +if { $R_Context == $L_Context2 } {
> + set assert pass
> +} else {
> + set assert fail
> +}
> +RecordAssertion $assert $Ip6ConfigRegisterDataNotifyFunc1AssertionGuid004 \
> + "Ip6Config.RegisterDataNotify - Event should be signaled for DataType - DadXmits."
> +
> +#
> +# Clean up
> +#
> +SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> +Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.UnregisterDataNotify - Unregister notification event for configuration." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +BS->CloseEvent {@R_DoneEvent,&@R_Status}
> +GetAck
> +
> +EndScope _IP6CONFIG_UNREGISTERDATANOTIFY_FUNC1_CASE2
> +
> EndLog
> \ No newline at end of file
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [edk2-test][Patch] uefi-sct/EMS:Add the checkpoint for SetData
2018-10-12 8:57 ` Supreeth Venkatesh
@ 2018-10-12 17:01 ` Jin, Eric
0 siblings, 0 replies; 4+ messages in thread
From: Jin, Eric @ 2018-10-12 17:01 UTC (permalink / raw)
To: Supreeth Venkatesh, edk2-devel@lists.01.org; +Cc: Wu, Jiaxin
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Jiaxin, could you please review the patch? Thanks
Best Regards
Eric
-----Original Message-----
From: edk2-devel [mailto:edk2-devel-bounces@lists.01.org] On Behalf Of Supreeth Venkatesh
Sent: Friday, October 12, 2018 4:57 PM
To: Jin, Eric <eric.jin@intel.com>; edk2-devel@lists.01.org
Subject: Re: [edk2] [edk2-test][Patch] uefi-sct/EMS:Add the checkpoint for SetData
Eric,
We don't have EMS support in AARCH64, Can someone from Intel review this?
Thanks,
Supreeth
On 10/12/2018 09:20 AM, Eric Jin wrote:
> Spec clarifies the configuration clearance behavior
> Correct the end line
>
> Contributed-under: TianoCore Contribution Agreement 1.1
> Signed-off-by: Eric Jin <eric.jin@intel.com>
> Cc: Supreeth Venkatesh <supreeth.venkatesh@arm.com>
> ---
> .../IP4Config2/Include/Ip4Config2AssertionGuid.tcl | 5 +-
> .../TestCase/IP4Config2/SetData.Func1.Case2.tcl | 714 +++++++++++++
> .../Bin/TestCase/IP6Config/GetData.Conf1.Case1.tcl | 142 +--
> .../Bin/TestCase/IP6Config/GetData.Conf2.Case1.tcl | 140 +--
> .../Bin/TestCase/IP6Config/GetData.Conf3.Case1.tcl | 788 +++++++-------
> .../Bin/TestCase/IP6Config/GetData.Conf4.Case1.tcl | 144 +--
> .../Bin/TestCase/IP6Config/GetData.Conf5.Case1.tcl | 982 +++++++++---------
> .../Bin/TestCase/IP6Config/GetData.Func1.Case1.tcl | 542 +++++-----
> .../TestCase/IP6Config/Include/Ip6Config.inc.tcl | 192 ++--
> .../TestCase/IP6Config/Include/Ip6Config.proc.tcl | 30 +-
> .../IP6Config/Include/Ip6ConfigAssertionGuid.tcl | 180 ++--
> .../TestCase/IP6Config/Include/Ip6ConfigDefine.tcl | 102 +-
> .../IP6Config/RegisterDataNotify.Conf1.Case1.tcl | 178 ++--
> .../IP6Config/RegisterDataNotify.Conf2.Case1.tcl | 178 ++--
> .../IP6Config/RegisterDataNotify.Conf3.Case1.tcl | 216 ++--
> .../IP6Config/RegisterDataNotify.Func1.Case1.tcl | 1076 ++++++++++----------
> .../IP6Config/RegisterDataNotify.Func1.Case2.tcl | 530 +++++-----
> .../Bin/TestCase/IP6Config/SetData.Conf1.Case1.tcl | 142 +--
> .../Bin/TestCase/IP6Config/SetData.Conf2.Case1.tcl | 596 +++++------
> .../Bin/TestCase/IP6Config/SetData.Conf3.Case1.tcl | 142 +--
> .../Bin/TestCase/IP6Config/SetData.Conf4.Case1.tcl | 474 ++++-----
> .../Bin/TestCase/IP6Config/SetData.Conf5.Case1.tcl | 556 +++++-----
> .../Bin/TestCase/IP6Config/SetData.Conf6.Case1.tcl | 142 +--
> .../Bin/TestCase/IP6Config/SetData.Conf7.Case1.tcl | 1020 +++++++++----------
> .../Bin/TestCase/IP6Config/SetData.Func1.Case1.tcl | 546 +++++-----
> .../Bin/TestCase/IP6Config/SetData.Func2.Case1.tcl | 838 +++++++++++++++
> .../IP6Config/UnregisterDataNotify.Conf1.Case1.tcl | 178 ++--
> .../IP6Config/UnregisterDataNotify.Conf2.Case1.tcl | 164 +--
> .../IP6Config/UnregisterDataNotify.Conf2.Case2.tcl | 196 ++--
> .../IP6Config/UnregisterDataNotify.Func1.Case1.tcl | 194 ++--
> .../IP6Config/UnregisterDataNotify.Func1.Case2.tcl | 472 ++++-----
> 31 files changed, 6683 insertions(+), 5116 deletions(-)
> create mode 100644 uefi-sct/EMS/Bin/TestCase/IP4Config2/SetData.Func1.Case2.tcl
> create mode 100644 uefi-sct/EMS/Bin/TestCase/IP6Config/SetData.Func2.Case1.tcl
>
> diff --git a/uefi-sct/EMS/Bin/TestCase/IP4Config2/Include/Ip4Config2AssertionGuid.tcl b/uefi-sct/EMS/Bin/TestCase/IP4Config2/Include/Ip4Config2AssertionGuid.tcl
> index 91a4fd1..e0604b2 100644
> --- a/uefi-sct/EMS/Bin/TestCase/IP4Config2/Include/Ip4Config2AssertionGuid.tcl
> +++ b/uefi-sct/EMS/Bin/TestCase/IP4Config2/Include/Ip4Config2AssertionGuid.tcl
> @@ -1,6 +1,6 @@
> #
> # Copyright 2017 Unified EFI, Inc.<BR>
> -# Copyright (c) 2017, Intel Corporation. All rights reserved.<BR>
> +# Copyright (c) 2017 - 2018, Intel Corporation. All rights reserved.<BR>
> #
> # This program and the accompanying materials
> # are licensed and made available under the terms and conditions of the BSD License
> @@ -39,6 +39,9 @@ set Ip4Config2SetDataFunc1AssertionGuid008 00FBB58A-4BB3-499F-AE6B-744B6B9932E6
> set Ip4Config2SetDataFunc1AssertionGuid009 DB8EF05C-085F-45D1-A0B1-DC2F307B6F1E
> set Ip4Config2SetDataFunc1AssertionGuid010 29143621-896C-4FB9-9E70-7A4D2DA6BEE0
> set Ip4Config2SetDataFunc1AssertionGuid011 72FEDF83-6755-4212-AF0F-780F457EFAA7
> +set Ip4Config2SetDataFunc1AssertionGuid012 EB7769D1-A31F-4F37-86F3-2BBF54834785
> +set Ip4Config2SetDataFunc1AssertionGuid013 78F3A664-A8E4-43B8-961F-71033E9145F2
> +set Ip4Config2SetDataFunc1AssertionGuid014 7F717D50-3A7C-4E2A-9F15-0A802E9BAFE6
>
> #
> # Guid for GetData() interface
> diff --git a/uefi-sct/EMS/Bin/TestCase/IP4Config2/SetData.Func1.Case2.tcl b/uefi-sct/EMS/Bin/TestCase/IP4Config2/SetData.Func1.Case2.tcl
> new file mode 100644
> index 0000000..0517032
> --- /dev/null
> +++ b/uefi-sct/EMS/Bin/TestCase/IP4Config2/SetData.Func1.Case2.tcl
> @@ -0,0 +1,714 @@
> +#
> +# Copyright (c) 2018, Intel Corporation. All rights reserved.<BR>
> +#
> +# This program and the accompanying materials
> +# are licensed and made available under the terms and conditions of the BSD License
> +# which accompanies this distribution. The full text of the license may be found at
> +# http://opensource.org/licenses/bsd-license.php
> +#
> +# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> +# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
> +#
> +################################################################################
> +CaseLevel FUNCTION
> +CaseAttribute AUTO
> +CaseVerboseLevel DEFAULT
> +set reportfile report.csv
> +
> +#
> +# test case Name, category, description, GUID...
> +#
> +CaseGuid B2AD20DF-2325-42B2-A199-A49ADF04A5DD
> +CaseName SetData.Func1.Case2
> +CaseCategory IP4Config2
> +CaseDescription {SetData must succeed When DataSize is 0 and
> + Data is NULL,and existing configuration is cleared.}
> +
> +################################################################################
> +Include IP4Config2/Include/Ip4Config2.inc.tcl
> +
> +
> +#
> +# Begin log ...
> +#
> +BeginLog
> +
> +#
> +# BeginScope
> +#
> +BeginScope _IP4CONFIG2_SETDATA_FUNC1_CASE2
> +
> +#
> +# Parameter Definition
> +# R_ represents "Remote EFI Side Parameter"
> +# L_ represents "Local ENTS Side Parameter"
> +#
> +#
> +# Parameter Definition
> +# R_ represents "Remote EFI Side Parameter"
> +# L_ represents "Local ENTS Side Parameter"
> +#
> +UINTN R_Status
> +UINTN R_Context
> +UINTN R_DoneEvent
> +UINTN R_Ip4Config2DataSize
> +UINT32 R_Ip4Config2DataType
> +UINT32 R_Ip4Config2Policy
> +
> +#
> +# Check Point: Call Ip4Config2->SetData to set Static policy
> +#
> +SetVar R_Ip4Config2DataType $IP4C2DT(Policy)
> +SetVar R_Ip4Config2DataSize [Sizeof UINT32]
> +SetVar R_Ip4Config2Policy $IP4C2P(Static)
> +
> +SetVar R_Context 0
> +BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context,\
> + &@R_DoneEvent, &@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "BS.CreateEvent." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +Ip4Config2->RegisterDataNotify "@R_Ip4Config2DataType,@R_DoneEvent,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip4Config2.RegisterDataNotify - Register notification event for configuration." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +Ip4Config2->SetData "@R_Ip4Config2DataType,@R_Ip4Config2DataSize,&@R_Ip4Config2Policy,&@R_Status"
> +GetAck
> +GetVar R_Status
> +if { $R_Status == $EFI_SUCCESS } {
> + set assert pass
> + RecordAssertion $assert $Ip4Config2SetDataFunc1AssertionGuid001 \
> + "Ip4Config2.SetData - Call SetData to set Static policy." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +} elseif { $R_Status == $EFI_NOT_READY } {
> + set i 0
> + set L_TimeOut 30
> + while { 1 > 0 } {
> + GetVar R_Context
> + if { $R_Context == 1 } {
> + break
> + } elseif { $i == $L_TimeOut } {
> + set assert fail
> + RecordAssertion $assert $Ip4Config2SetDataFunc1AssertionGuid001 \
> + "SetData failed.(event hasn't been signaled before TIMEOUT)." \
> + "TIMEOUT value is $L_TimeOut (sec), "
> + SetVar R_Ip4Config2DataType $IP4C2DT(Policy)
> + Ip4Config2->UnregisterDataNotify "@R_Ip4Config2DataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP4CONFIG2_SETDATA_FUNC1_CASE2
> + EndLog
> + return
> + }
> + incr i
> + Stall 1
> + }
> +} else {
> + set assert fail
> + RecordAssertion $assert $Ip4Config2SetDataFunc1AssertionGuid001 \
> + "Ip4Config2.SetData - Call SetData to set Static policy." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> + SetVar R_Ip4Config2DataType $IP4C2DT(Policy)
> + Ip4Config2->UnregisterDataNotify "@R_Ip4Config2DataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP4CONFIG2_SETDATA_FUNC1_CASE2
> + EndLog
> + return
> +}
> +
> +
> +Ip4Config2->GetData "@R_Ip4Config2DataType,&@R_Ip4Config2DataSize,&@R_Ip4Config2Policy,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip4Config2.GetData - Call GetData to get policy value." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +GetVar R_Ip4Config2Policy
> +if { $R_Ip4Config2Policy == $IP4C2P(Static) } {
> + set assert pass
> +} else {
> + set assert fail
> +
> + RecordAssertion $assert $Ip4Config2SetDataFunc1AssertionGuid002 \
> + "Set Static policy succeeds(event is signaled correctly and data correct)."
> + SetVar R_Ip4Config2Policy $IP4C2DT(Policy)
> + Ip4Config2->UnregisterDataNotify "@R_Ip4Config2DataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP4CONFIG2_SETDATA_FUNC1_CASE2
> + EndLog
> + return
> +}
> +
> +Ip4Config2->UnregisterDataNotify "@R_Ip4Config2DataType,@R_DoneEvent,&@R_Status"
> +GetAck
> +RecordAssertion $assert $Ip4Config2SetDataFunc1AssertionGuid002 \
> + "Set Static policy succeeds(event is signaled correctly and data correct)."
> +
> +#
> +# Check Point : Set Manual Address
> +#
> +EFI_IP4_CONFIG2_MANUAL_ADDRESS R_Temp_Ip4Config2ManualAddress
> +EFI_IP4_CONFIG2_MANUAL_ADDRESS R_Ip4Config2ManualAddress
> +SetVar R_Ip4Config2DataType $IP4C2DT(ManualAddress)
> +SetVar R_Ip4Config2DataSize [Sizeof EFI_IP4_CONFIG2_MANUAL_ADDRESS]
> +SetIpv4Address R_Temp_Ip4Config2ManualAddress.Address "10.239.9.15"
> +SetIpv4Address R_Temp_Ip4Config2ManualAddress.SubnetMask "255.255.255.0"
> +SetVar R_Ip4Config2ManualAddress @R_Temp_Ip4Config2ManualAddress
> +
> +SetVar R_Context 0
> +Ip4Config2->RegisterDataNotify "@R_Ip4Config2DataType,@R_DoneEvent,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip4Config2.RegisterDataNotify - Register notification event for configuration." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +
> +Ip4Config2->SetData "@R_Ip4Config2DataType,@R_Ip4Config2DataSize,&@R_Ip4Config2ManualAddress,&@R_Status"
> +GetAck
> +GetVar R_Status
> +
> +if { $R_Status == $EFI_SUCCESS } {
> + set assert pass
> + RecordAssertion $assert $Ip4Config2SetDataFunc1AssertionGuid003 \
> + "Ip4Config2.SetData - Call SetData to set Manual Address." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +} elseif { $R_Status == $EFI_NOT_READY } {
> + set i 0
> + set L_TimeOut 30
> + while { 1 > 0 } {
> + GetVar R_Context
> + if { $R_Context == 1 } {
> + break
> + } elseif { $i == $L_TimeOut } {
> + set assert fail
> + RecordAssertion $assert $Ip4Config2SetDataFunc1AssertionGuid003 \
> + "SetData failed.(event hasn't been signaled before TIMEOUT)." \
> + "TIMEOUT value is $L_TimeOut (sec), "
> + SetVar R_Ip4Config2DataType $IP4C2DT(ManualAddress)
> + Ip4Config2->UnregisterDataNotify "@R_Ip4Config2DataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP4CONFIG2_SETDATA_FUNC1_CASE2
> + EndLog
> + return
> + }
> + incr i
> + Stall 1
> + }
> +} else {
> + set assert fail
> + RecordAssertion $assert $Ip4Config2SetDataFunc1AssertionGuid003 \
> + "IP4Config2.SetData - Call SetData to set Manual Address." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> + SetVar R_Ip4Config2DataType $IP4C2DT(ManualAddress)
> + Ip4Config2->UnregisterDataNotify "@R_Ip4Config2DataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP4CONFIG2_SETDATA_FUNC1_CASE2
> + EndLog
> + return
> +}
> +
> +
> +Ip4Config2->GetData "@R_Ip4Config2DataType,&@R_Ip4Config2DataSize,&@R_Ip4Config2ManualAddress,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip4Config2.GetData - Call GetData to get Manual Address." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +
> +EFI_IPv4_ADDRESS R_Addr1
> +EFI_IPv4_ADDRESS R_Addr2
> +set R_Addr1 [GetIpv4Address R_Ip4Config2ManualAddress.Address]
> +puts "R_Addr1 - $R_Addr1"
> +set R_Addr2 [GetIpv4Address R_Ip4Config2ManualAddress.SubnetMask]
> +puts "R_Addr1 - $R_Addr2"
> +
> +if {[string compare -nocase $R_Addr1 10.239.9.15] == 0} {
> + if {[string compare -nocase $R_Addr2 255.255.255.0] == 0} {
> + set assert pass
> + } else {
> + set assert fail
> + RecordAssertion $assert $Ip4Config2SetDataFunc1AssertionGuid004 \
> + "Set ManualAddress succeeds(event is signaled correctly and data correct)."
> + Ip4Config2->UnregisterDataNotify "@R_Ip4Config2DataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP4CONFIG2_SETDATA_FUNC1_CASE2
> + EndLog
> + return
> + }
> +} else {
> + set assert fail
> +
> + RecordAssertion $assert $Ip4Config2SetDataFunc1AssertionGuid004 \
> + "Set ManualAddress succeeds(event is signaled correctly and data correct)."
> + Ip4Config2->UnregisterDataNotify "@R_Ip4Config2DataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP4CONFIG2_SETDATA_FUNC1_CASE2
> + EndLog
> + return
> +}
> +
> +Ip4Config2->UnregisterDataNotify "@R_Ip4Config2DataType,@R_DoneEvent,&@R_Status"
> +GetAck
> +RecordAssertion $assert $Ip4Config2SetDataFunc1AssertionGuid004 \
> + "Set ManualAddress succeeds(event is signaled correctly and data correct)."
> +
> +#
> +# Check Points : Set Gateway
> +#
> +EFI_IPv4_ADDRESS R_Ip4Config2Gateway
> +SetVar R_Ip4Config2DataType $IP4C2DT(Gateway)
> +SetVar R_Ip4Config2DataSize [Sizeof EFI_IPv4_ADDRESS]
> +SetIpv4Address R_Ip4Config2Gateway "10.239.9.241"
> +
> +SetVar R_Context 0
> +Ip4Config2->RegisterDataNotify "@R_Ip4Config2DataType,@R_DoneEvent,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip4Config2.RegisterDataNotify - Register notification event for configuration." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +Ip4Config2->SetData "@R_Ip4Config2DataType,@R_Ip4Config2DataSize,&@R_Ip4Config2Gateway,&@R_Status"
> +GetAck
> +GetVar R_Status
> +
> +if { $R_Status == $EFI_SUCCESS } {
> + set assert pass
> + RecordAssertion $assert $Ip4Config2SetDataFunc1AssertionGuid005 \
> + "Ip4Config2.SetData - Call SetData to set Gateway Address." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +} elseif { $R_Status == $EFI_NOT_READY } {
> + set i 0
> + set L_TimeOut 30
> + while { 1 > 0 } {
> + GetVar R_Context
> + if { $R_Context == 1 } {
> + break
> + } elseif { $i == $L_TimeOut } {
> + set assert fail
> + RecordAssertion $assert $Ip4Config2SetDataFunc1AssertionGuid005 \
> + "SetData failed.(event hasn't been signaled before TIMEOUT)." \
> + "TIMEOUT value is $L_TimeOut (sec), "
> + Ip4Config2->UnregisterDataNotify "@R_Ip4Config2DataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP4CONFIG2_SETDATA_FUNC1_CASE2
> + EndLog
> + return
> + }
> + incr i
> + Stall 1
> + }
> +} else {
> + set assert fail
> + RecordAssertion $assert $Ip4Config2SetDataFunc1AssertionGuid005 \
> + "Ip4Config2.SetData - Call SetData to set Gateway Address." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> + Ip4Config2->UnregisterDataNotify "@R_Ip4Config2DataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP4CONFIG2_SETDATA_FUNC1_CASE2
> + EndLog
> + return
> +}
> +
> +
> +Ip4Config2->GetData "@R_Ip4Config2DataType,&@R_Ip4Config2DataSize,&@R_Ip4Config2Gateway,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip4Config2.GetData - Call GetData to get Gateway Address." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +EFI_IPv4_ADDRESS R_Addr3
> +set R_Addr3 [GetIpv4Address R_Ip4Config2Gateway]
> +puts "R_Addr3 - $R_Addr3"
> +
> +if {[string compare -nocase $R_Addr3 10.239.9.241] == 0} {
> + set assert pass
> +} else {
> + set assert fail
> +
> + RecordAssertion $assert $Ip4Config2SetDataFunc1AssertionGuid006 \
> + "Set Gateway succeeds(event is signaled correctly and data correct)."
> + Ip4Config2->UnregisterDataNotify "@R_Ip4Config2DataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP4CONFIG2_SETDATA_FUNC1_CASE2
> + EndLog
> + return
> +}
> +
> +Ip4Config2->UnregisterDataNotify "@R_Ip4Config2DataType,@R_DoneEvent,&@R_Status"
> +GetAck
> +RecordAssertion $assert $Ip4Config2SetDataFunc1AssertionGuid006 \
> + "Set Gateway succeeds(event is signaled correctly and data correct)."
> +
> +#
> +# Check Point : Set Dns Server
> +#
> +EFI_IPv4_ADDRESS R_Ip4Config2DnsServer
> +SetVar R_Ip4Config2DataType $IP4C2DT(DnsServer)
> +SetVar R_Ip4Config2DataSize [Sizeof EFI_IPv4_ADDRESS]
> +SetIpv4Address R_Ip4Config2DnsServer "10.248.2.5"
> +
> +SetVar R_Context 0
> +Ip4Config2->RegisterDataNotify "@R_Ip4Config2DataType,@R_DoneEvent,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip4Config2.RegisterDataNotify - Register notification event for configuration." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +Ip4Config2->SetData "@R_Ip4Config2DataType,@R_Ip4Config2DataSize,&@R_Ip4Config2DnsServer,&@R_Status"
> +GetAck
> +GetVar R_Status
> +
> +if { $R_Status == $EFI_SUCCESS } {
> + set assert pass
> + RecordAssertion $assert $Ip4Config2SetDataFunc1AssertionGuid007 \
> + "Ip4Config2.SetData - Call SetData to set Dns Address." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +} elseif { $R_Status == $EFI_NOT_READY } {
> + set i 0
> + set L_TimeOut 30
> + while { 1 > 0 } {
> + GetVar R_Context
> + if { $R_Context == 1 } {
> + break
> + } elseif { $i == $L_TimeOut } {
> + set assert fail
> + RecordAssertion $assert $Ip4Config2SetDataFunc1AssertionGuid007 \
> + "SetData failed.(event hasn't been signaled before TIMEOUT)." \
> + "TIMEOUT value is $L_TimeOut (sec), "
> + Ip4Config2->UnregisterDataNotify "@R_Ip4Config2DataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP4CONFIG2_SETDATA_FUNC1_CASE2
> + EndLog
> + return
> + }
> + incr i
> + Stall 1
> + }
> +} else {
> + set assert fail
> + RecordAssertion $assert $Ip4Config2SetDataFunc1AssertionGuid007 \
> + "Ip4Config2.SetData - Call SetData to set Dns Address." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> + Ip4Config2->UnregisterDataNotify "@R_Ip4Config2DataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP4CONFIG2_SETDATA_FUNC1_CASE2
> + EndLog
> + return
> +}
> +
> +
> +Ip4Config2->GetData "@R_Ip4Config2DataType,&@R_Ip4Config2DataSize,&@R_Ip4Config2DnsServer,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip4Config2.GetData - Call GetData to get Dns Address." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +EFI_IPv4_ADDRESS R_Addr4
> +set R_Addr4 [GetIpv4Address R_Ip4Config2DnsServer]
> +puts "R_Addr4 - $R_Addr4"
> +
> +if {[string compare -nocase $R_Addr4 10.248.2.5] == 0} {
> + set assert pass
> +} else {
> + set assert fail
> +
> + RecordAssertion $assert $Ip4Config2SetDataFunc1AssertionGuid008 \
> + "Set Dns succeeds(event is signaled correctly and data correct)."
> + Ip4Config2->UnregisterDataNotify "@R_Ip4Config2DataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP4CONFIG2_SETDATA_FUNC1_CASE2
> + EndLog
> + return
> +}
> +
> +Ip4Config2->UnregisterDataNotify "@R_Ip4Config2DataType,@R_DoneEvent,&@R_Status"
> +GetAck
> +RecordAssertion $assert $Ip4Config2SetDataFunc1AssertionGuid008 \
> + "Set Dns succeeds(event is signaled correctly and data correct)."
> +
> +
> +
> +#
> +# Clean up - Call SetData when DataSize is 0 and Data is NULL
> +#
> +
> +
> +
> +#
> +# Set Manual Address
> +#
> +
> +SetVar R_Ip4Config2DataType $IP4C2DT(ManualAddress)
> +SetVar R_Ip4Config2DataSize 0
> +
> +
> +
> +SetVar R_Context 0
> +Ip4Config2->RegisterDataNotify "@R_Ip4Config2DataType,@R_DoneEvent,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip4Config2.RegisterDataNotify - Register notification event for configuration." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +
> +Ip4Config2->SetData "@R_Ip4Config2DataType,@R_Ip4Config2DataSize,NULL,&@R_Status"
> +GetAck
> +GetVar R_Status
> +
> +if { $R_Status == $EFI_SUCCESS } {
> + set assert pass
> + RecordAssertion $assert $Ip4Config2SetDataFunc1AssertionGuid012 \
> + "Ip4Config2.SetData - Call SetData to clear Manual Address." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +} elseif { $R_Status == $EFI_NOT_READY } {
> + set i 0
> + set L_TimeOut 30
> + while { 1 > 0 } {
> + GetVar R_Context
> + if { $R_Context == 1 } {
> + break
> + } elseif { $i == $L_TimeOut } {
> + set assert fail
> + RecordAssertion $assert $Ip4Config2SetDataFunc1AssertionGuid012 \
> + "SetData to clear Manual Address failed.(event hasn't been signaled before TIMEOUT)." \
> + "TIMEOUT value is $L_TimeOut (sec), "
> + SetVar R_Ip4Config2DataType $IP4C2DT(ManualAddress)
> + Ip4Config2->UnregisterDataNotify "@R_Ip4Config2DataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP4CONFIG2_SETDATA_FUNC1_CASE2
> + EndLog
> + return
> + }
> + incr i
> + Stall 1
> + }
> +} else {
> + set assert fail
> + RecordAssertion $assert $Ip4Config2SetDataFunc1AssertionGuid012 \
> + "IP4Config2.SetData - Call SetData to clear Manual Address." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> + SetVar R_Ip4Config2DataType $IP4C2DT(ManualAddress)
> + Ip4Config2->UnregisterDataNotify "@R_Ip4Config2DataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP4CONFIG2_SETDATA_FUNC1_CASE2
> + EndLog
> + return
> +}
> +
> +Ip4Config2->UnregisterDataNotify "@R_Ip4Config2DataType,@R_DoneEvent,&@R_Status"
> +GetAck
> +BS->CloseEvent {@R_DoneEvent,&@R_Status}
> +GetAck
> +
> +SetVar R_Ip4Config2DataSize [Sizeof EFI_IP4_CONFIG2_MANUAL_ADDRESS]
> +Ip4Config2->GetData "@R_Ip4Config2DataType,&@R_Ip4Config2DataSize,&@R_Ip4Config2ManualAddress,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_NOT_FOUND]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip4Config2.GetData - Call GetData to get Manual Address." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_NOT_FOUND"
> +
> +#
> +# Set Gateway Address
> +#
> +
> +
> +SetVar R_Ip4Config2DataType $IP4C2DT(Gateway)
> +SetVar R_Ip4Config2DataSize 0
> +
> +SetVar R_Context 0
> +Ip4Config2->RegisterDataNotify "@R_Ip4Config2DataType,@R_DoneEvent,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip4Config2.RegisterDataNotify - Register notification event for configuration." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +Ip4Config2->SetData "@R_Ip4Config2DataType,@R_Ip4Config2DataSize,NULL,&@R_Status"
> +GetAck
> +GetVar R_Status
> +
> +if { $R_Status == $EFI_SUCCESS } {
> + set assert pass
> + RecordAssertion $assert $Ip4Config2SetDataFunc1AssertionGuid013 \
> + "Ip4Config2.SetData - Call SetData to clear Gateway Address." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +} elseif { $R_Status == $EFI_NOT_READY } {
> + set i 0
> + set L_TimeOut 30
> + while { 1 > 0 } {
> + GetVar R_Context
> + if { $R_Context == 1 } {
> + break
> + } elseif { $i == $L_TimeOut } {
> + set assert fail
> + RecordAssertion $assert $Ip4Config2SetDataFunc1AssertionGuid013 \
> + "SetData to clear Gateway Address failed.(event hasn't been signaled before TIMEOUT)." \
> + "TIMEOUT value is $L_TimeOut (sec), "
> + Ip4Config2->UnregisterDataNotify "@R_Ip4Config2DataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP4CONFIG2_SETDATA_FUNC1_CASE2
> + EndLog
> + return
> + }
> + incr i
> + Stall 1
> + }
> +} else {
> + set assert fail
> + RecordAssertion $assert $Ip4Config2SetDataFunc1AssertionGuid013 \
> + "Ip4Config2.SetData - Call SetData to clear Gateway Address." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> + Ip4Config2->UnregisterDataNotify "@R_Ip4Config2DataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP4CONFIG2_SETDATA_FUNC1_CASE2
> + EndLog
> + return
> +}
> +
> +Ip4Config2->UnregisterDataNotify "@R_Ip4Config2DataType,@R_DoneEvent,&@R_Status"
> +GetAck
> +BS->CloseEvent {@R_DoneEvent,&@R_Status}
> +GetAck
> +
> +SetVar R_Ip4Config2DataSize [Sizeof EFI_IPv4_ADDRESS]
> +Ip4Config2->GetData "@R_Ip4Config2DataType,&@R_Ip4Config2DataSize,&@R_Ip4Config2Gateway,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_NOT_FOUND]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip4Config2.GetData - Call GetData to get Gateway Address." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_NOT_FOUND"
> +
> +
> +#
> +# Check Point : Set Dns Server
> +#
> +
> +SetVar R_Ip4Config2DataType $IP4C2DT(DnsServer)
> +SetVar R_Ip4Config2DataSize 0
> +
> +SetVar R_Context 0
> +Ip4Config2->RegisterDataNotify "@R_Ip4Config2DataType,@R_DoneEvent,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip4Config2.RegisterDataNotify - Register notification event for configuration." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +Ip4Config2->SetData "@R_Ip4Config2DataType,@R_Ip4Config2DataSize,NULL,&@R_Status"
> +GetAck
> +GetVar R_Status
> +
> +if { $R_Status == $EFI_SUCCESS } {
> + set assert pass
> + RecordAssertion $assert $Ip4Config2SetDataFunc1AssertionGuid014 \
> + "Ip4Config2.SetData - Call SetData to clear Dns Address." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +} elseif { $R_Status == $EFI_NOT_READY } {
> + set i 0
> + set L_TimeOut 30
> + while { 1 > 0 } {
> + GetVar R_Context
> + if { $R_Context == 1 } {
> + break
> + } elseif { $i == $L_TimeOut } {
> + set assert fail
> + RecordAssertion $assert $Ip4Config2SetDataFunc1AssertionGuid014 \
> + "SetData to clear Dns Address failed.(event hasn't been signaled before TIMEOUT)." \
> + "TIMEOUT value is $L_TimeOut (sec), "
> + Ip4Config2->UnregisterDataNotify "@R_Ip4Config2DataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP4CONFIG2_SETDATA_FUNC1_CASE2
> + EndLog
> + return
> + }
> + incr i
> + Stall 1
> + }
> +} else {
> + set assert fail
> + RecordAssertion $assert $Ip4Config2SetDataFunc1AssertionGuid014 \
> + "Ip4Config2.SetData - Call SetData to clear Dns Address." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> + Ip4Config2->UnregisterDataNotify "@R_Ip4Config2DataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP4CONFIG2_SETDATA_FUNC1_CASE2
> + EndLog
> + return
> +}
> +
> +Ip4Config2->UnregisterDataNotify "@R_Ip4Config2DataType,@R_DoneEvent,&@R_Status"
> +GetAck
> +BS->CloseEvent {@R_DoneEvent,&@R_Status}
> +GetAck
> +
> +SetVar R_Ip4Config2DataSize [Sizeof EFI_IPv4_ADDRESS]
> +Ip4Config2->GetData "@R_Ip4Config2DataType,&@R_Ip4Config2DataSize,&@R_Ip4Config2DnsServer,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_NOT_FOUND]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip4Config2.GetData - Call GetData to get Dns Address." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_NOT_FOUND"
> +
> +
> +
> +EndScope _IP4CONFIG2_SETDATA_FUNC1_CASE2
> +
> +EndLog
> \ No newline at end of file
> diff --git a/uefi-sct/EMS/Bin/TestCase/IP6Config/GetData.Conf1.Case1.tcl b/uefi-sct/EMS/Bin/TestCase/IP6Config/GetData.Conf1.Case1.tcl
> index a6b788d..beeb2fb 100644
> --- a/uefi-sct/EMS/Bin/TestCase/IP6Config/GetData.Conf1.Case1.tcl
> +++ b/uefi-sct/EMS/Bin/TestCase/IP6Config/GetData.Conf1.Case1.tcl
> @@ -1,72 +1,72 @@
> -#
> -# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
> -# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
> -#
> -# This program and the accompanying materials
> -# are licensed and made available under the terms and conditions of the BSD License
> -# which accompanies this distribution. The full text of the license may be found at
> -# http://opensource.org/licenses/bsd-license.php
> -#
> -# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> -# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
> -#
> -################################################################################
> -CaseLevel CONFORMANCE
> -CaseAttribute AUTO
> -CaseVerboseLevel DEFAULT
> -set reportfile report.csv
> -
> -#
> -# test case Name, category, description, GUID...
> -#
> -CaseGuid 11FF93B5-8A85-4770-88C2-99E0AF9AE0AA
> -CaseName GetData.Conf1.Case1
> -CaseCategory IP6Config
> -CaseDescription {GetData must not succeed when data size is NULL.}
> -
> -################################################################################
> -Include IP6Config/Include/Ip6Config.inc.tcl
> -
> -
> -#
> -# Begin log ...
> -#
> -BeginLog
> -
> -#
> -# BeginScope
> -#
> -BeginScope _IP6CONFIG_GETDATA_CONF1
> -
> -#
> -# Parameter Definition
> -# R_ represents "Remote EFI Side Parameter"
> -# L_ represents "Local ENTS Side Parameter"
> -#
> -UINTN R_Status
> -UINTN R_Context
> -UINTN R_DoneEvent
> -UINTN R_Ip6ConfigDataSize
> -EFI_IP6_CONFIG_INTERFACE_INFO R_Ip6ConfigInterfaceInfo
> -EFI_IP6_CONFIG_INTERFACE_ID R_Ip6ConfigInterfaceId
> -UINT32 R_Ip6ConfigPolicy
> -UINT32 R_Ip6ConfigDataType
> -EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS R_Ip6ConfigDadTransmits
> -EFI_IP6_CONFIG_MANUAL_ADDRESS R_Ip6ConfigManualAddress
> -
> -#
> -# Check Point: Call Ip6Config->GetData with datasize is NULL.
> -#
> -SetVar R_Ip6ConfigDataType $IP6CDT(InterfaceInfo)
> -SetVar R_Ip6ConfigDataSize [Sizeof EFI_IP6_CONFIG_INTERFACE_INFO]
> -
> -Ip6Config->GetData "@R_Ip6ConfigDataType,NULL,&@R_Ip6ConfigInterfaceInfo,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_INVALID_PARAMETER]
> -RecordAssertion $assert $Ip6ConfigGetDataConf1AssertionGuid001 \
> - "Ip6Config.GetData - Call GetData with DataSize NULL." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_INVALID_PARAMETER"
> -
> -EndScope _IP6CONFIG_GETDATA_CONF1
> -
> +#
> +# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
> +# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
> +#
> +# This program and the accompanying materials
> +# are licensed and made available under the terms and conditions of the BSD License
> +# which accompanies this distribution. The full text of the license may be found at
> +# http://opensource.org/licenses/bsd-license.php
> +#
> +# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> +# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
> +#
> +################################################################################
> +CaseLevel CONFORMANCE
> +CaseAttribute AUTO
> +CaseVerboseLevel DEFAULT
> +set reportfile report.csv
> +
> +#
> +# test case Name, category, description, GUID...
> +#
> +CaseGuid 11FF93B5-8A85-4770-88C2-99E0AF9AE0AA
> +CaseName GetData.Conf1.Case1
> +CaseCategory IP6Config
> +CaseDescription {GetData must not succeed when data size is NULL.}
> +
> +################################################################################
> +Include IP6Config/Include/Ip6Config.inc.tcl
> +
> +
> +#
> +# Begin log ...
> +#
> +BeginLog
> +
> +#
> +# BeginScope
> +#
> +BeginScope _IP6CONFIG_GETDATA_CONF1
> +
> +#
> +# Parameter Definition
> +# R_ represents "Remote EFI Side Parameter"
> +# L_ represents "Local ENTS Side Parameter"
> +#
> +UINTN R_Status
> +UINTN R_Context
> +UINTN R_DoneEvent
> +UINTN R_Ip6ConfigDataSize
> +EFI_IP6_CONFIG_INTERFACE_INFO R_Ip6ConfigInterfaceInfo
> +EFI_IP6_CONFIG_INTERFACE_ID R_Ip6ConfigInterfaceId
> +UINT32 R_Ip6ConfigPolicy
> +UINT32 R_Ip6ConfigDataType
> +EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS R_Ip6ConfigDadTransmits
> +EFI_IP6_CONFIG_MANUAL_ADDRESS R_Ip6ConfigManualAddress
> +
> +#
> +# Check Point: Call Ip6Config->GetData with datasize is NULL.
> +#
> +SetVar R_Ip6ConfigDataType $IP6CDT(InterfaceInfo)
> +SetVar R_Ip6ConfigDataSize [Sizeof EFI_IP6_CONFIG_INTERFACE_INFO]
> +
> +Ip6Config->GetData "@R_Ip6ConfigDataType,NULL,&@R_Ip6ConfigInterfaceInfo,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_INVALID_PARAMETER]
> +RecordAssertion $assert $Ip6ConfigGetDataConf1AssertionGuid001 \
> + "Ip6Config.GetData - Call GetData with DataSize NULL." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_INVALID_PARAMETER"
> +
> +EndScope _IP6CONFIG_GETDATA_CONF1
> +
> EndLog
> \ No newline at end of file
> diff --git a/uefi-sct/EMS/Bin/TestCase/IP6Config/GetData.Conf2.Case1.tcl b/uefi-sct/EMS/Bin/TestCase/IP6Config/GetData.Conf2.Case1.tcl
> index c095756..6f90a9c 100644
> --- a/uefi-sct/EMS/Bin/TestCase/IP6Config/GetData.Conf2.Case1.tcl
> +++ b/uefi-sct/EMS/Bin/TestCase/IP6Config/GetData.Conf2.Case1.tcl
> @@ -1,71 +1,71 @@
> -#
> -# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
> -# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
> -#
> -# This program and the accompanying materials
> -# are licensed and made available under the terms and conditions of the BSD License
> -# which accompanies this distribution. The full text of the license may be found at
> -# http://opensource.org/licenses/bsd-license.php
> -#
> -# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> -# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
> -#
> -################################################################################
> -CaseLevel CONFORMANCE
> -CaseAttribute AUTO
> -CaseVerboseLevel DEFAULT
> -set reportfile report.csv
> -
> -#
> -# test case Name, category, description, GUID...
> -#
> -CaseGuid B4C48D71-EF72-42e0-BD57-4825F7EB7B9F
> -CaseName GetData.Conf2.Case1
> -CaseCategory IP6Config
> -CaseDescription {GetData must not succeed when data is NULL if data size is not zero.}
> -
> -################################################################################
> -Include IP6Config/Include/Ip6Config.inc.tcl
> -
> -
> -#
> -# Begin log ...
> -#
> -BeginLog
> -
> -#
> -# BeginScope
> -#
> -BeginScope _IP6CONFIG_GETDATA_CONF2
> -
> -#
> -# Parameter Definition
> -# R_ represents "Remote EFI Side Parameter"
> -# L_ represents "Local ENTS Side Parameter"
> -#
> -UINTN R_Status
> -UINTN R_Context
> -UINTN R_DoneEvent
> -UINTN R_Ip6ConfigDataSize
> -UINT32 R_Ip6ConfigDataType
> -EFI_IP6_CONFIG_INTERFACE_INFO R_Ip6ConfigInterfaceInfo
> -EFI_IP6_CONFIG_INTERFACE_ID R_Ip6ConfigInterfaceId
> -EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS R_Ip6ConfigDadTransmits
> -EFI_IP6_CONFIG_MANUAL_ADDRESS R_Ip6ConfigManualAddress
> -
> -#
> -# Check Point: Call Ip6Config->GetData with data is NULL.
> -#
> -SetVar R_Ip6ConfigDataType $IP6CDT(InterfaceInfo)
> -SetVar R_Ip6ConfigDataSize [Sizeof EFI_IP6_CONFIG_INTERFACE_INFO]
> -
> -Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,NULL,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_INVALID_PARAMETER]
> -RecordAssertion $assert $Ip6ConfigGetDataConf2AssertionGuid001 \
> - "Ip6Config.GetData - Call GetData with Data NULL." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_INVALID_PARAMETER"
> -
> -EndScope _IP6CONFIG_GETDATA_CONF2
> -
> +#
> +# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
> +# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
> +#
> +# This program and the accompanying materials
> +# are licensed and made available under the terms and conditions of the BSD License
> +# which accompanies this distribution. The full text of the license may be found at
> +# http://opensource.org/licenses/bsd-license.php
> +#
> +# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> +# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
> +#
> +################################################################################
> +CaseLevel CONFORMANCE
> +CaseAttribute AUTO
> +CaseVerboseLevel DEFAULT
> +set reportfile report.csv
> +
> +#
> +# test case Name, category, description, GUID...
> +#
> +CaseGuid B4C48D71-EF72-42e0-BD57-4825F7EB7B9F
> +CaseName GetData.Conf2.Case1
> +CaseCategory IP6Config
> +CaseDescription {GetData must not succeed when data is NULL if data size is not zero.}
> +
> +################################################################################
> +Include IP6Config/Include/Ip6Config.inc.tcl
> +
> +
> +#
> +# Begin log ...
> +#
> +BeginLog
> +
> +#
> +# BeginScope
> +#
> +BeginScope _IP6CONFIG_GETDATA_CONF2
> +
> +#
> +# Parameter Definition
> +# R_ represents "Remote EFI Side Parameter"
> +# L_ represents "Local ENTS Side Parameter"
> +#
> +UINTN R_Status
> +UINTN R_Context
> +UINTN R_DoneEvent
> +UINTN R_Ip6ConfigDataSize
> +UINT32 R_Ip6ConfigDataType
> +EFI_IP6_CONFIG_INTERFACE_INFO R_Ip6ConfigInterfaceInfo
> +EFI_IP6_CONFIG_INTERFACE_ID R_Ip6ConfigInterfaceId
> +EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS R_Ip6ConfigDadTransmits
> +EFI_IP6_CONFIG_MANUAL_ADDRESS R_Ip6ConfigManualAddress
> +
> +#
> +# Check Point: Call Ip6Config->GetData with data is NULL.
> +#
> +SetVar R_Ip6ConfigDataType $IP6CDT(InterfaceInfo)
> +SetVar R_Ip6ConfigDataSize [Sizeof EFI_IP6_CONFIG_INTERFACE_INFO]
> +
> +Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,NULL,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_INVALID_PARAMETER]
> +RecordAssertion $assert $Ip6ConfigGetDataConf2AssertionGuid001 \
> + "Ip6Config.GetData - Call GetData with Data NULL." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_INVALID_PARAMETER"
> +
> +EndScope _IP6CONFIG_GETDATA_CONF2
> +
> EndLog
> \ No newline at end of file
> diff --git a/uefi-sct/EMS/Bin/TestCase/IP6Config/GetData.Conf3.Case1.tcl b/uefi-sct/EMS/Bin/TestCase/IP6Config/GetData.Conf3.Case1.tcl
> index c90d442..5688648 100644
> --- a/uefi-sct/EMS/Bin/TestCase/IP6Config/GetData.Conf3.Case1.tcl
> +++ b/uefi-sct/EMS/Bin/TestCase/IP6Config/GetData.Conf3.Case1.tcl
> @@ -1,395 +1,395 @@
> -#
> -# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
> -# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
> -#
> -# This program and the accompanying materials
> -# are licensed and made available under the terms and conditions of the BSD License
> -# which accompanies this distribution. The full text of the license may be found at
> -# http://opensource.org/licenses/bsd-license.php
> -#
> -# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> -# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
> -#
> -################################################################################
> -CaseLevel CONFORMANCE
> -CaseAttribute AUTO
> -CaseVerboseLevel DEFAULT
> -set reportfile report.csv
> -
> -#
> -# test case Name, category, description, GUID...
> -#
> -CaseGuid 7B341FC4-1F10-4851-83AD-103A56B0EC35
> -CaseName GetData.Conf3.Case1
> -CaseCategory IP6Config
> -CaseDescription {GetData must not succeed when DataSize is too small for the data type.}
> -
> -################################################################################
> -Include IP6Config/Include/Ip6Config.inc.tcl
> -
> -
> -#
> -# Begin log ...
> -#
> -BeginLog
> -
> -#
> -# BeginScope
> -#
> -BeginScope _IP6CONFIG_GETDATA_CONF3
> -
> -#
> -# Parameter Definition
> -# R_ represents "Remote EFI Side Parameter"
> -# L_ represents "Local ENTS Side Parameter"
> -#
> -UINTN R_Status
> -UINTN R_Context
> -UINTN R_Context1
> -UINTN R_DoneEvent
> -UINTN R_DoneEvent1
> -UINTN R_Ip6ConfigDataSize
> -UINT32 R_Ip6ConfigDataType
> -EFI_IP6_CONFIG_INTERFACE_INFO R_Ip6ConfigInterfaceInfo
> -EFI_IP6_CONFIG_INTERFACE_ID R_Ip6ConfigInterfaceId
> -UINT32 R_Ip6ConfigPolicy
> -EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS R_Ip6ConfigDadTransmits
> -
> -#
> -# Check Point: Call Ip6Config->SetData to set manual policy
> -#
> -SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> -SetVar R_Ip6ConfigDataSize [Sizeof UINT32]
> -SetVar R_Ip6ConfigPolicy $IP6CP(Manual)
> -
> -SetVar R_Context 0
> -BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context,\
> - &@R_DoneEvent, &@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "BS.CreateEvent." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.RegisterDataNotify - Register notification event for configuration." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_Status"
> -GetAck
> -GetVar R_Status
> -if { $R_Status == $EFI_SUCCESS } {
> - set assert pass
> - RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.SetData - Call SetData to set manual policy." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -} elseif { $R_Status == $EFI_NOT_READY } {
> - set i 0
> - set L_TimeOut 30
> - while { 1 > 0 } {
> - GetVar R_Context
> - if { $R_Context == 1 } {
> - break
> - } elseif { $i == $L_TimeOut } {
> - set assert fail
> -
> - RecordAssertion $assert $GenericAssertionGuid \
> - "SetData failed.(event hasn't been signaled before TIMEOUT)." \
> - "TIMEOUT value is $L_TimeOut (sec), "
> - SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - EndScope _IP6CONFIG_GETDATA_CONF3
> - EndLog
> - return
> - }
> - incr i
> - Stall 1
> - }
> -} else {
> - set assert fail
> - RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.SetData - Call SetData to set manual policy." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> - SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - EndScope _IP6CONFIG_GETDATA_CONF3
> - EndLog
> - return
> -}
> -
> -Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.GetData - Call GetData to get policy value." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -GetVar R_Ip6ConfigPolicy
> -if { $R_Ip6ConfigPolicy == $IP6CP(Manual) } {
> - set assert pass
> -} else {
> - set assert fail
> -
> - RecordAssertion $assert $GenericAssertionGuid \
> - "Set manual policy failure (event is signaled correctly and data correct)."
> - SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - EndScope _IP6CONFIG_GETDATA_CONF3
> - EndLog
> - return
> -}
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Set manual policy succeeds(event is signaled correctly and data correct)."
> -
> -#
> -# Check Point : Set Manual Address with valid value
> -#
> -EFI_IP6_CONFIG_MANUAL_ADDRESS R_Temp_Ip6ConfigManualAddress
> -
> -set L_ManualListLen 1
> -EFI_IP6_CONFIG_MANUAL_ADDRESS R_Ip6ConfigManualAddress
> -set L_UnitLen [Sizeof EFI_IP6_CONFIG_MANUAL_ADDRESS]
> -set L_ListLen [expr {$L_UnitLen * $L_ManualListLen}]
> -SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
> -SetVar R_Ip6ConfigDataSize $L_ListLen
> -SetVar R_Temp_Ip6ConfigManualAddress.IsAnycast FALSE
> -SetVar R_Temp_Ip6ConfigManualAddress.PrefixLength 64
> -SetIpv6Address R_Temp_Ip6ConfigManualAddress.Address "2002::5001"
> -SetVar R_Ip6ConfigManualAddress @R_Temp_Ip6ConfigManualAddress
> -
> -SetVar R_Context1 0
> -BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context1,\
> - &@R_DoneEvent1, &@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "BS.CreateEvent." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.RegisterDataNotify - Register notification event for configuration." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigManualAddress,&@R_Status"
> -GetAck
> -GetVar R_Status
> -if { $R_Status == $EFI_SUCCESS } {
> - set assert pass
> - RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.SetData - Call SetData with valid value." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -} elseif { $R_Status == $EFI_NOT_READY } {
> - set i 0
> - set L_TimeOut 30
> - while { 1 > 0 } {
> - GetVar R_Context1
> - if { $R_Context1 == 1 } {
> - break
> - } elseif { $i == $L_TimeOut } {
> - set assert fail
> -
> - RecordAssertion $assert $GenericAssertionGuid \
> - "SetData failed.(event hasn't been signaled before TIMEOUT)." \
> - "TIMEOUT value is $L_TimeOut (sec), "
> - SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> - GetAck
> - SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - EndScope _IP6CONFIG_GETDATA_CONF3
> - EndLog
> - return
> - }
> - incr i
> - Stall 1
> - }
> -} else {
> - set assert fail
> - RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.SetData - Call SetData to set manual address." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> - SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> - GetAck
> - SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - EndScope _IP6CONFIG_GETDATA_CONF3
> - EndLog
> - return
> -}
> -
> -#
> -# Check Point : Get Manual Address with datasize too small
> -#
> -SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
> -SetVar R_Ip6ConfigDataSize 16
> -
> -Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigManualAddress,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_BUFFER_TOO_SMALL]
> -RecordAssertion $assert $Ip6ConfigGetDataConf3AssertionGuid001 \
> - "Ip6Config.GetData - Call GetData with the datasize too small." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_BUFFER_TOO_SMALL"
> -
> -GetVar R_Ip6ConfigDataSize
> -set L_ObtainedSize [ expr { $R_Ip6ConfigDataSize } ]
> -set L_DesiredSize [ Sizeof EFI_IP6_CONFIG_MANUAL_ADDRESS ]
> -if { [ expr { $L_ObtainedSize % $L_DesiredSize } ] == 0 } {
> - set assert pass
> -} else {
> - set assert fail
> -}
> -RecordAssertion $assert $Ip6ConfigGetDataConf3AssertionGuid002 \
> - "Ip6Config.GetData - Correctly Modify the DataSize." \
> - "ReturnSize - $L_ObtainedSize, ExpectedSize - $L_DesiredSize"
> -
> -#
> -# Clean up
> -#
> -
> -#
> -# Set automatic policy (this will clean up all address information configured)
> -#
> -SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> -SetVar R_Ip6ConfigDataSize [Sizeof UINT32]
> -SetVar R_Ip6ConfigPolicy $IP6CP(Automatic)
> -
> -SetVar R_Context 0
> -
> -Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_Status"
> -GetAck
> -GetVar R_Status
> -if { $R_Status == $EFI_SUCCESS } {
> - set assert pass
> -} elseif { $R_Status == $EFI_NOT_READY } {
> - set i 0
> - set L_TimeOut 30
> - set assert pass
> - while { 1 > 0 } {
> - GetVar R_Context
> - if { $R_Context == 1 } {
> - break
> - } elseif { $i == $L_TimeOut } {
> - set assert fail
> -
> - SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> - GetAck
> -
> - EndScope _IP6CONFIG_GETDATA_CONF3
> - EndLog
> - return
> - }
> - incr i
> - Stall 1
> - }
> -} else {
> - set assert fail
> -
> - SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> - GetAck
> -
> - EndScope _IP6CONFIG_GETDATA_CONF3
> - EndLog
> - return
> -}
> -
> -Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_Status"
> -GetAck
> -GetVar R_Ip6ConfigPolicy
> -if { $R_Ip6ConfigPolicy == $IP6CP(Automatic) } {
> - set assert pass
> -} else {
> - set assert fail
> -
> - RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.SetData - Set automatic policy to clean up the former configuration." \
> - "TimeUsed - $i, TimeOut Value- $L_TimeOut"
> - SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> - GetAck
> -
> - EndScope _IP6CONFIG_GETDATA_CONF3
> - EndLog
> - return
> -}
> -
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.SetData - Set automatic policy to clean up the former configuration." \
> - "TimeUsed - $i, TimeOut Value- $L_TimeOut"
> -
> -#
> -# Unregister Event for Manual Address and close event
> -#
> -SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
> -Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.UnregisterDataNotify - Unregister notification event for configuration." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> -GetAck
> -SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> -Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.UnregisterDataNotify - Unregister notification event for configuration." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -BS->CloseEvent {@R_DoneEvent,&@R_Status}
> -GetAck
> -
> -EndScope _IP6CONFIG_GETDATA_CONF3
> -
> +#
> +# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
> +# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
> +#
> +# This program and the accompanying materials
> +# are licensed and made available under the terms and conditions of the BSD License
> +# which accompanies this distribution. The full text of the license may be found at
> +# http://opensource.org/licenses/bsd-license.php
> +#
> +# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> +# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
> +#
> +################################################################################
> +CaseLevel CONFORMANCE
> +CaseAttribute AUTO
> +CaseVerboseLevel DEFAULT
> +set reportfile report.csv
> +
> +#
> +# test case Name, category, description, GUID...
> +#
> +CaseGuid 7B341FC4-1F10-4851-83AD-103A56B0EC35
> +CaseName GetData.Conf3.Case1
> +CaseCategory IP6Config
> +CaseDescription {GetData must not succeed when DataSize is too small for the data type.}
> +
> +################################################################################
> +Include IP6Config/Include/Ip6Config.inc.tcl
> +
> +
> +#
> +# Begin log ...
> +#
> +BeginLog
> +
> +#
> +# BeginScope
> +#
> +BeginScope _IP6CONFIG_GETDATA_CONF3
> +
> +#
> +# Parameter Definition
> +# R_ represents "Remote EFI Side Parameter"
> +# L_ represents "Local ENTS Side Parameter"
> +#
> +UINTN R_Status
> +UINTN R_Context
> +UINTN R_Context1
> +UINTN R_DoneEvent
> +UINTN R_DoneEvent1
> +UINTN R_Ip6ConfigDataSize
> +UINT32 R_Ip6ConfigDataType
> +EFI_IP6_CONFIG_INTERFACE_INFO R_Ip6ConfigInterfaceInfo
> +EFI_IP6_CONFIG_INTERFACE_ID R_Ip6ConfigInterfaceId
> +UINT32 R_Ip6ConfigPolicy
> +EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS R_Ip6ConfigDadTransmits
> +
> +#
> +# Check Point: Call Ip6Config->SetData to set manual policy
> +#
> +SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> +SetVar R_Ip6ConfigDataSize [Sizeof UINT32]
> +SetVar R_Ip6ConfigPolicy $IP6CP(Manual)
> +
> +SetVar R_Context 0
> +BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context,\
> + &@R_DoneEvent, &@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "BS.CreateEvent." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.RegisterDataNotify - Register notification event for configuration." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_Status"
> +GetAck
> +GetVar R_Status
> +if { $R_Status == $EFI_SUCCESS } {
> + set assert pass
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.SetData - Call SetData to set manual policy." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +} elseif { $R_Status == $EFI_NOT_READY } {
> + set i 0
> + set L_TimeOut 30
> + while { 1 > 0 } {
> + GetVar R_Context
> + if { $R_Context == 1 } {
> + break
> + } elseif { $i == $L_TimeOut } {
> + set assert fail
> +
> + RecordAssertion $assert $GenericAssertionGuid \
> + "SetData failed.(event hasn't been signaled before TIMEOUT)." \
> + "TIMEOUT value is $L_TimeOut (sec), "
> + SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_GETDATA_CONF3
> + EndLog
> + return
> + }
> + incr i
> + Stall 1
> + }
> +} else {
> + set assert fail
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.SetData - Call SetData to set manual policy." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> + SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_GETDATA_CONF3
> + EndLog
> + return
> +}
> +
> +Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.GetData - Call GetData to get policy value." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +GetVar R_Ip6ConfigPolicy
> +if { $R_Ip6ConfigPolicy == $IP6CP(Manual) } {
> + set assert pass
> +} else {
> + set assert fail
> +
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Set manual policy failure (event is signaled correctly and data correct)."
> + SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_GETDATA_CONF3
> + EndLog
> + return
> +}
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Set manual policy succeeds(event is signaled correctly and data correct)."
> +
> +#
> +# Check Point : Set Manual Address with valid value
> +#
> +EFI_IP6_CONFIG_MANUAL_ADDRESS R_Temp_Ip6ConfigManualAddress
> +
> +set L_ManualListLen 1
> +EFI_IP6_CONFIG_MANUAL_ADDRESS R_Ip6ConfigManualAddress
> +set L_UnitLen [Sizeof EFI_IP6_CONFIG_MANUAL_ADDRESS]
> +set L_ListLen [expr {$L_UnitLen * $L_ManualListLen}]
> +SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
> +SetVar R_Ip6ConfigDataSize $L_ListLen
> +SetVar R_Temp_Ip6ConfigManualAddress.IsAnycast FALSE
> +SetVar R_Temp_Ip6ConfigManualAddress.PrefixLength 64
> +SetIpv6Address R_Temp_Ip6ConfigManualAddress.Address "2002::5001"
> +SetVar R_Ip6ConfigManualAddress @R_Temp_Ip6ConfigManualAddress
> +
> +SetVar R_Context1 0
> +BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context1,\
> + &@R_DoneEvent1, &@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "BS.CreateEvent." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.RegisterDataNotify - Register notification event for configuration." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigManualAddress,&@R_Status"
> +GetAck
> +GetVar R_Status
> +if { $R_Status == $EFI_SUCCESS } {
> + set assert pass
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.SetData - Call SetData with valid value." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +} elseif { $R_Status == $EFI_NOT_READY } {
> + set i 0
> + set L_TimeOut 30
> + while { 1 > 0 } {
> + GetVar R_Context1
> + if { $R_Context1 == 1 } {
> + break
> + } elseif { $i == $L_TimeOut } {
> + set assert fail
> +
> + RecordAssertion $assert $GenericAssertionGuid \
> + "SetData failed.(event hasn't been signaled before TIMEOUT)." \
> + "TIMEOUT value is $L_TimeOut (sec), "
> + SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> + GetAck
> + SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_GETDATA_CONF3
> + EndLog
> + return
> + }
> + incr i
> + Stall 1
> + }
> +} else {
> + set assert fail
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.SetData - Call SetData to set manual address." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> + SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> + GetAck
> + SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_GETDATA_CONF3
> + EndLog
> + return
> +}
> +
> +#
> +# Check Point : Get Manual Address with datasize too small
> +#
> +SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
> +SetVar R_Ip6ConfigDataSize 16
> +
> +Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigManualAddress,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_BUFFER_TOO_SMALL]
> +RecordAssertion $assert $Ip6ConfigGetDataConf3AssertionGuid001 \
> + "Ip6Config.GetData - Call GetData with the datasize too small." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_BUFFER_TOO_SMALL"
> +
> +GetVar R_Ip6ConfigDataSize
> +set L_ObtainedSize [ expr { $R_Ip6ConfigDataSize } ]
> +set L_DesiredSize [ Sizeof EFI_IP6_CONFIG_MANUAL_ADDRESS ]
> +if { [ expr { $L_ObtainedSize % $L_DesiredSize } ] == 0 } {
> + set assert pass
> +} else {
> + set assert fail
> +}
> +RecordAssertion $assert $Ip6ConfigGetDataConf3AssertionGuid002 \
> + "Ip6Config.GetData - Correctly Modify the DataSize." \
> + "ReturnSize - $L_ObtainedSize, ExpectedSize - $L_DesiredSize"
> +
> +#
> +# Clean up
> +#
> +
> +#
> +# Set automatic policy (this will clean up all address information configured)
> +#
> +SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> +SetVar R_Ip6ConfigDataSize [Sizeof UINT32]
> +SetVar R_Ip6ConfigPolicy $IP6CP(Automatic)
> +
> +SetVar R_Context 0
> +
> +Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_Status"
> +GetAck
> +GetVar R_Status
> +if { $R_Status == $EFI_SUCCESS } {
> + set assert pass
> +} elseif { $R_Status == $EFI_NOT_READY } {
> + set i 0
> + set L_TimeOut 30
> + set assert pass
> + while { 1 > 0 } {
> + GetVar R_Context
> + if { $R_Context == 1 } {
> + break
> + } elseif { $i == $L_TimeOut } {
> + set assert fail
> +
> + SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> + GetAck
> +
> + EndScope _IP6CONFIG_GETDATA_CONF3
> + EndLog
> + return
> + }
> + incr i
> + Stall 1
> + }
> +} else {
> + set assert fail
> +
> + SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> + GetAck
> +
> + EndScope _IP6CONFIG_GETDATA_CONF3
> + EndLog
> + return
> +}
> +
> +Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_Status"
> +GetAck
> +GetVar R_Ip6ConfigPolicy
> +if { $R_Ip6ConfigPolicy == $IP6CP(Automatic) } {
> + set assert pass
> +} else {
> + set assert fail
> +
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.SetData - Set automatic policy to clean up the former configuration." \
> + "TimeUsed - $i, TimeOut Value- $L_TimeOut"
> + SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> + GetAck
> +
> + EndScope _IP6CONFIG_GETDATA_CONF3
> + EndLog
> + return
> +}
> +
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.SetData - Set automatic policy to clean up the former configuration." \
> + "TimeUsed - $i, TimeOut Value- $L_TimeOut"
> +
> +#
> +# Unregister Event for Manual Address and close event
> +#
> +SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
> +Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.UnregisterDataNotify - Unregister notification event for configuration." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> +GetAck
> +SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> +Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.UnregisterDataNotify - Unregister notification event for configuration." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +BS->CloseEvent {@R_DoneEvent,&@R_Status}
> +GetAck
> +
> +EndScope _IP6CONFIG_GETDATA_CONF3
> +
> EndLog
> \ No newline at end of file
> diff --git a/uefi-sct/EMS/Bin/TestCase/IP6Config/GetData.Conf4.Case1.tcl b/uefi-sct/EMS/Bin/TestCase/IP6Config/GetData.Conf4.Case1.tcl
> index e36cdfc..bd38be0 100644
> --- a/uefi-sct/EMS/Bin/TestCase/IP6Config/GetData.Conf4.Case1.tcl
> +++ b/uefi-sct/EMS/Bin/TestCase/IP6Config/GetData.Conf4.Case1.tcl
> @@ -1,73 +1,73 @@
> -#
> -# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
> -# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
> -#
> -# This program and the accompanying materials
> -# are licensed and made available under the terms and conditions of the BSD License
> -# which accompanies this distribution. The full text of the license may be found at
> -# http://opensource.org/licenses/bsd-license.php
> -#
> -# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> -# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
> -#
> -################################################################################
> -CaseLevel CONFORMANCE
> -CaseAttribute AUTO
> -CaseVerboseLevel DEFAULT
> -set reportfile report.csv
> -
> -#
> -# test case Name, category, description, GUID...
> -#
> -CaseGuid F340A957-9345-478d-BE53-5F7C561C1866
> -CaseName GetData.Conf4.Case1
> -CaseCategory IP6Config
> -CaseDescription {GetData must not succeed when data type is not found.}
> -
> -################################################################################
> -Include IP6Config/Include/Ip6Config.inc.tcl
> -
> -
> -#
> -# Begin log ...
> -#
> -BeginLog
> -
> -#
> -# BeginScope
> -#
> -BeginScope _IP6CONFIG_GETDATA_CONF4
> -
> -#
> -# Parameter Definition
> -# R_ represents "Remote EFI Side Parameter"
> -# L_ represents "Local ENTS Side Parameter"
> -#
> -UINTN R_Status
> -UINTN R_Context
> -UINTN R_DoneEvent
> -UINTN R_Ip6ConfigDataSize
> -UINT32 R_Ip6ConfigDataType
> -UINTN R_Ip6ConfigMaximumType
> -EFI_IP6_CONFIG_INTERFACE_INFO R_Ip6ConfigInterfaceInfo
> -EFI_IP6_CONFIG_INTERFACE_ID R_Ip6ConfigInterfaceId
> -UINT32 R_Ip6ConfigPolicy
> -EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS R_Ip6ConfigDadTransmits
> -EFI_IP6_CONFIG_MANUAL_ADDRESS R_Ip6ConfigManualAddress
> -
> -#
> -# Check Point: Call Ip6Config->GetData with the date type not existing.
> -#
> -SetVar R_Ip6ConfigDataType $IP6CDT(Maximum)
> -SetVar R_Ip6ConfigDataSize [Sizeof UINT32]
> -
> -Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigMaximumType,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_NOT_FOUND]
> -RecordAssertion $assert $Ip6ConfigGetDataConf4AssertionGuid001 \
> - "Ip6Config.GetData - Call GetData with Datatype not existing." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_NOT_FOUND"
> -
> -EndScope _IP6CONFIG_GETDATA_CONF4
> -
> +#
> +# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
> +# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
> +#
> +# This program and the accompanying materials
> +# are licensed and made available under the terms and conditions of the BSD License
> +# which accompanies this distribution. The full text of the license may be found at
> +# http://opensource.org/licenses/bsd-license.php
> +#
> +# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> +# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
> +#
> +################################################################################
> +CaseLevel CONFORMANCE
> +CaseAttribute AUTO
> +CaseVerboseLevel DEFAULT
> +set reportfile report.csv
> +
> +#
> +# test case Name, category, description, GUID...
> +#
> +CaseGuid F340A957-9345-478d-BE53-5F7C561C1866
> +CaseName GetData.Conf4.Case1
> +CaseCategory IP6Config
> +CaseDescription {GetData must not succeed when data type is not found.}
> +
> +################################################################################
> +Include IP6Config/Include/Ip6Config.inc.tcl
> +
> +
> +#
> +# Begin log ...
> +#
> +BeginLog
> +
> +#
> +# BeginScope
> +#
> +BeginScope _IP6CONFIG_GETDATA_CONF4
> +
> +#
> +# Parameter Definition
> +# R_ represents "Remote EFI Side Parameter"
> +# L_ represents "Local ENTS Side Parameter"
> +#
> +UINTN R_Status
> +UINTN R_Context
> +UINTN R_DoneEvent
> +UINTN R_Ip6ConfigDataSize
> +UINT32 R_Ip6ConfigDataType
> +UINTN R_Ip6ConfigMaximumType
> +EFI_IP6_CONFIG_INTERFACE_INFO R_Ip6ConfigInterfaceInfo
> +EFI_IP6_CONFIG_INTERFACE_ID R_Ip6ConfigInterfaceId
> +UINT32 R_Ip6ConfigPolicy
> +EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS R_Ip6ConfigDadTransmits
> +EFI_IP6_CONFIG_MANUAL_ADDRESS R_Ip6ConfigManualAddress
> +
> +#
> +# Check Point: Call Ip6Config->GetData with the date type not existing.
> +#
> +SetVar R_Ip6ConfigDataType $IP6CDT(Maximum)
> +SetVar R_Ip6ConfigDataSize [Sizeof UINT32]
> +
> +Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigMaximumType,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_NOT_FOUND]
> +RecordAssertion $assert $Ip6ConfigGetDataConf4AssertionGuid001 \
> + "Ip6Config.GetData - Call GetData with Datatype not existing." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_NOT_FOUND"
> +
> +EndScope _IP6CONFIG_GETDATA_CONF4
> +
> EndLog
> \ No newline at end of file
> diff --git a/uefi-sct/EMS/Bin/TestCase/IP6Config/GetData.Conf5.Case1.tcl b/uefi-sct/EMS/Bin/TestCase/IP6Config/GetData.Conf5.Case1.tcl
> index c39323f..c186520 100644
> --- a/uefi-sct/EMS/Bin/TestCase/IP6Config/GetData.Conf5.Case1.tcl
> +++ b/uefi-sct/EMS/Bin/TestCase/IP6Config/GetData.Conf5.Case1.tcl
> @@ -1,492 +1,492 @@
> -#
> -# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
> -# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
> -#
> -# This program and the accompanying materials
> -# are licensed and made available under the terms and conditions of the BSD License
> -# which accompanies this distribution. The full text of the license may be found at
> -# http://opensource.org/licenses/bsd-license.php
> -#
> -# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> -# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
> -#
> -################################################################################
> -CaseLevel CONFORMANCE
> -CaseAttribute AUTO
> -CaseVerboseLevel DEFAULT
> -set reportfile report.csv
> -
> -#
> -# test case Name, category, description, GUID...
> -#
> -CaseGuid 6638523D-470B-4c50-AE75-DE0CE6854DE8
> -CaseName GetData.Conf5.Case1
> -CaseCategory IP6Config
> -CaseDescription {GetData must not succeed when the last asynchronous process for the data type has not been finished yet.}
> -
> -################################################################################
> -Include IP6Config/Include/Ip6Config.inc.tcl
> -
> -
> -#
> -# Begin log ...
> -#
> -BeginLog
> -
> -#
> -# BeginScope
> -#
> -BeginScope _IP6CONFIG_GETDATA_CONF5
> -
> -#
> -# Parameter Definition
> -# R_ represents "Remote EFI Side Parameter"
> -# L_ represents "Local ENTS Side Parameter"
> -#
> -UINTN R_Status
> -UINTN R_Context
> -UINTN R_DoneEvent
> -UINTN R_Context1
> -UINTN R_DoneEvent1
> -UINTN R_Ip6ConfigDataSize
> -UINT32 R_Ip6ConfigDataType
> -EFI_IP6_CONFIG_INTERFACE_INFO R_Ip6ConfigInterfaceInfo
> -EFI_IP6_CONFIG_INTERFACE_ID R_Ip6ConfigInterfaceId
> -UINT32 R_Ip6ConfigPolicy
> -EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS R_Ip6ConfigDadTransmits
> -
> -#
> -# Check Point: Call Ip6Config->SetData to set manual policy
> -#
> -SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> -SetVar R_Ip6ConfigDataSize [Sizeof UINT32]
> -SetVar R_Ip6ConfigPolicy $IP6CP(Manual)
> -
> -SetVar R_Context 0
> -BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context,\
> - &@R_DoneEvent, &@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "BS.CreateEvent." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.RegisterDataNotify - Register notification event for configuration." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_Status"
> -GetAck
> -GetVar R_Status
> -if { $R_Status == $EFI_SUCCESS } {
> - set assert pass
> - RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.SetData - Call SetData to set manual policy." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -} elseif { $R_Status == $EFI_NOT_READY } {
> - set i 0
> - set L_TimeOut 30
> - while { 1 > 0 } {
> - GetVar R_Context
> - if { $R_Context == 1 } {
> - break
> - } elseif { $i == $L_TimeOut } {
> - set assert fail
> - RecordAssertion $assert $GenericAssertionGuid \
> - "SetData failed.(event hasn't been signaled before TIMEOUT)." \
> - "TIMEOUT value is $L_TimeOut (sec), "
> - SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - EndScope _IP6CONFIG_GETDATA_CONF5
> - EndLog
> - return
> - }
> - incr i
> - Stall 1
> - }
> -} else {
> - set assert fail
> - RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.SetData - Call SetData to set manual policy." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> - SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - EndScope _IP6CONFIG_GETDATA_CONF5
> - EndLog
> - return
> -}
> -
> -Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.GetData - Call GetData to get policy value." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -GetVar R_Ip6ConfigPolicy
> -if { $R_Ip6ConfigPolicy == $IP6CP(Manual) } {
> - set assert pass
> -} else {
> - set assert fail
> -
> - RecordAssertion $assert $GenericAssertionGuid \
> - "Set manual policy succeeds(event is signaled correctly and data correct)."
> - SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - EndScope _IP6CONFIG_GETDATA_CONF5
> - EndLog
> - return
> -}
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Set manual policy succeeds(event is signaled correctly and data correct)."
> -#
> -# Check Point: Call Ip6Config->SetData to set DadXmits 20
> -#
> -SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> -SetVar R_Ip6ConfigDataSize [Sizeof EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS]
> -SetVar R_Ip6ConfigDadTransmits.DupAddrDetectTransmits 20
> -
> -SetVar R_Context1 0
> -BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context1,\
> - &@R_DoneEvent1, &@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "BS.CreateEvent." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.RegisterDataNotify - Register notification event for configuration." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigDadTransmits,&@R_Status"
> -GetAck
> -GetVar R_Status
> -if { $R_Status == $EFI_SUCCESS } {
> - set assert pass
> - RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.SetData - Call SetData to set DadXmits 10." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -} elseif { $R_Status == $EFI_NOT_READY } {
> - set i 0
> - set L_TimeOut 30
> - while { 1 > 0 } {
> - GetVar R_Context1
> - if { $R_Context1 == 1 } {
> - break
> - } elseif { $i == $L_TimeOut } {
> - set assert fail
> - RecordAssertion $assert $GenericAssertionGuid \
> - "SetData failed.(event hasn't been signaled before TIMEOUT)." \
> - "TIMEOUT value is $L_TimeOut (sec), "
> -
> - SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> - GetAck
> - EndScope _IP6CONFIG_GETDATA_CONF5
> - EndLog
> - return
> - }
> - incr i
> - Stall 1
> - }
> -} else {
> - set assert fail
> - RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.SetData - Call SetData to set DadXmits 10." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> - SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> - GetAck
> - EndScope _IP6CONFIG_GETDATA_CONF5
> - EndLog
> - return
> -}
> -
> -Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigDadTransmits,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.GetData - Call GetData to get DadXmits value." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -GetVar R_Ip6ConfigDadTransmits.DupAddrDetectTransmits
> -if { ${R_Ip6ConfigDadTransmits.DupAddrDetectTransmits} == 20 } {
> - set assert pass
> -} else {
> - set assert fail
> -
> - RecordAssertion $assert $GenericAssertionGuid \
> - "Set DadXmits succeeds(event is signaled correctly and data correct)."
> - SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> - GetAck
> - EndScope _IP6CONFIG_GETDATA_CONF5
> - EndLog
> - return
> -}
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Set DadXmits succeeds(event is signaled correctly and data correct)."
> -
> -#
> -# Check Point : Set Manual Address with valid parameter
> -#
> -EFI_IP6_CONFIG_MANUAL_ADDRESS R_Temp_Ip6ConfigManualAddress
> -
> -set L_ManualListLen 1
> -EFI_IP6_CONFIG_MANUAL_ADDRESS R_Ip6ConfigManualAddress
> -set L_UnitLen [Sizeof EFI_IP6_CONFIG_MANUAL_ADDRESS]
> -set L_ListLen [expr {$L_UnitLen * $L_ManualListLen}]
> -SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
> -SetVar R_Ip6ConfigDataSize $L_ListLen
> -SetVar R_Temp_Ip6ConfigManualAddress.IsAnycast FALSE
> -SetVar R_Temp_Ip6ConfigManualAddress.PrefixLength 64
> -SetIpv6Address R_Temp_Ip6ConfigManualAddress.Address "2002::5000"
> -SetVar R_Ip6ConfigManualAddress @R_Temp_Ip6ConfigManualAddress
> -
> -Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigManualAddress,&@R_Status"
> -GetAck
> -GetVar R_Status
> -if { $R_Status == $EFI_NOT_READY } {
> - set assert pass
> -} else {
> - set assert fail
> -
> - RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.SetData - Call SetData to set manual address with valid parameter." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_NOT_READY"
> - SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> - GetAck
> - EndScope _IP6CONFIG_GETDATA_CONF5
> - EndLog
> - return
> -}
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.SetData - Call SetData to set manual address with valid parameter." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_NOT_READY"
> -
> -#
> -# Check Point : Get Manual Address with valid parameter before the former setting finishes
> -#
> -set L_ManualListLen 1
> -set L_UnitLen [Sizeof EFI_IP6_CONFIG_MANUAL_ADDRESS]
> -set L_ListLen [expr {$L_UnitLen * $L_ManualListLen}]
> -SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
> -SetVar R_Ip6ConfigDataSize $L_ListLen
> -
> -Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigManualAddress,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_NOT_READY]
> -RecordAssertion $assert $Ip6ConfigGetDataConf5AssertionGuid001 \
> - "Ip6Config.SetData - Call GetData to get manual address before the former setting finishes." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_NOT_READY"
> -
> -#
> -# Make sure the former configurations succeeds
> -# (Eliminate the side-effect to other cases)
> -#
> -set i 0
> -set L_TimeOut 30
> -Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigManualAddress,&@R_Status"
> -GetAck
> -GetVar R_Status
> -set assert pass
> -while { $R_Status == $EFI_NOT_READY } {
> - Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigManualAddress,&@R_Status"
> - GetAck
> - GetVar R_Status
> - if { $R_Status == $EFI_SUCCESS } {
> - break
> - } elseif { $i == $L_TimeOut } {
> - set assert fail
> -
> - RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.SetData - former SetData finishes." \
> - "TimeUsed - $i, TimeOut Value- $L_TimeOut"
> - SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> - GetAck
> - EndScope _IP6CONFIG_GETDATA_CONF5
> - EndLog
> - return
> - }
> - incr i
> - Stall 1
> -}
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.SetData - former SetData finishes." \
> - "TimeUsed - $i, TimeOut Value- $L_TimeOut"
> -
> -
> -#
> -# Set automatic policy (this will clean up all address information configured)
> -#
> -SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> -SetVar R_Ip6ConfigDataSize [Sizeof UINT32]
> -SetVar R_Ip6ConfigPolicy $IP6CP(Automatic)
> -
> -SetVar R_Context 0
> -
> -Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_Status"
> -GetAck
> -GetVar R_Status
> -if { $R_Status == $EFI_SUCCESS } {
> - set assert pass
> -} elseif { $R_Status == $EFI_NOT_READY } {
> - set i 0
> - set L_TimeOut 30
> - set assert pass
> - while { 1 > 0 } {
> - GetVar R_Context
> - if { $R_Context == 1 } {
> - break
> - } elseif { $i == $L_TimeOut } {
> - set assert fail
> -
> - SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> - GetAck
> -
> - EndScope _IP6CONFIG_GETDATA_CONF5
> - EndLog
> - return
> - }
> - incr i
> - Stall 1
> - }
> -} else {
> - set assert fail
> -
> - SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> - GetAck
> -
> - EndScope _IP6CONFIG_GETDATA_CONF5
> - EndLog
> - return
> -}
> -
> -Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_Status"
> -GetAck
> -GetVar R_Ip6ConfigPolicy
> -if { $R_Ip6ConfigPolicy == $IP6CP(Automatic) } {
> - set assert pass
> -} else {
> - set assert fail
> -
> - RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.SetData - Set automatic policy to clean up the former configuration." \
> - "TimeUsed - $i, TimeOut Value- $L_TimeOut"
> -
> - SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> - GetAck
> -
> - EndScope _IP6CONFIG_GETDATA_CONF5
> - EndLog
> - return
> -}
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.SetData - Set automatic policy to clean up the former configuration." \
> - "TimeUsed - $i, TimeOut Value- $L_TimeOut"
> -
> -#
> -# Clean up
> -#
> -SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> -Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.UnregisterDataNotify - Unregister notification event for configuration." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -BS->CloseEvent {@R_DoneEvent,&@R_Status}
> -GetAck
> -
> -SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> -Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.UnregisterDataNotify - Unregister notification event for configuration." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> -GetAck
> -
> -EndScope _IP6CONFIG_GETDATA_CONF5
> -
> +#
> +# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
> +# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
> +#
> +# This program and the accompanying materials
> +# are licensed and made available under the terms and conditions of the BSD License
> +# which accompanies this distribution. The full text of the license may be found at
> +# http://opensource.org/licenses/bsd-license.php
> +#
> +# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> +# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
> +#
> +################################################################################
> +CaseLevel CONFORMANCE
> +CaseAttribute AUTO
> +CaseVerboseLevel DEFAULT
> +set reportfile report.csv
> +
> +#
> +# test case Name, category, description, GUID...
> +#
> +CaseGuid 6638523D-470B-4c50-AE75-DE0CE6854DE8
> +CaseName GetData.Conf5.Case1
> +CaseCategory IP6Config
> +CaseDescription {GetData must not succeed when the last asynchronous process for the data type has not been finished yet.}
> +
> +################################################################################
> +Include IP6Config/Include/Ip6Config.inc.tcl
> +
> +
> +#
> +# Begin log ...
> +#
> +BeginLog
> +
> +#
> +# BeginScope
> +#
> +BeginScope _IP6CONFIG_GETDATA_CONF5
> +
> +#
> +# Parameter Definition
> +# R_ represents "Remote EFI Side Parameter"
> +# L_ represents "Local ENTS Side Parameter"
> +#
> +UINTN R_Status
> +UINTN R_Context
> +UINTN R_DoneEvent
> +UINTN R_Context1
> +UINTN R_DoneEvent1
> +UINTN R_Ip6ConfigDataSize
> +UINT32 R_Ip6ConfigDataType
> +EFI_IP6_CONFIG_INTERFACE_INFO R_Ip6ConfigInterfaceInfo
> +EFI_IP6_CONFIG_INTERFACE_ID R_Ip6ConfigInterfaceId
> +UINT32 R_Ip6ConfigPolicy
> +EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS R_Ip6ConfigDadTransmits
> +
> +#
> +# Check Point: Call Ip6Config->SetData to set manual policy
> +#
> +SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> +SetVar R_Ip6ConfigDataSize [Sizeof UINT32]
> +SetVar R_Ip6ConfigPolicy $IP6CP(Manual)
> +
> +SetVar R_Context 0
> +BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context,\
> + &@R_DoneEvent, &@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "BS.CreateEvent." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.RegisterDataNotify - Register notification event for configuration." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_Status"
> +GetAck
> +GetVar R_Status
> +if { $R_Status == $EFI_SUCCESS } {
> + set assert pass
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.SetData - Call SetData to set manual policy." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +} elseif { $R_Status == $EFI_NOT_READY } {
> + set i 0
> + set L_TimeOut 30
> + while { 1 > 0 } {
> + GetVar R_Context
> + if { $R_Context == 1 } {
> + break
> + } elseif { $i == $L_TimeOut } {
> + set assert fail
> + RecordAssertion $assert $GenericAssertionGuid \
> + "SetData failed.(event hasn't been signaled before TIMEOUT)." \
> + "TIMEOUT value is $L_TimeOut (sec), "
> + SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_GETDATA_CONF5
> + EndLog
> + return
> + }
> + incr i
> + Stall 1
> + }
> +} else {
> + set assert fail
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.SetData - Call SetData to set manual policy." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> + SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_GETDATA_CONF5
> + EndLog
> + return
> +}
> +
> +Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.GetData - Call GetData to get policy value." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +GetVar R_Ip6ConfigPolicy
> +if { $R_Ip6ConfigPolicy == $IP6CP(Manual) } {
> + set assert pass
> +} else {
> + set assert fail
> +
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Set manual policy succeeds(event is signaled correctly and data correct)."
> + SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_GETDATA_CONF5
> + EndLog
> + return
> +}
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Set manual policy succeeds(event is signaled correctly and data correct)."
> +#
> +# Check Point: Call Ip6Config->SetData to set DadXmits 20
> +#
> +SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> +SetVar R_Ip6ConfigDataSize [Sizeof EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS]
> +SetVar R_Ip6ConfigDadTransmits.DupAddrDetectTransmits 20
> +
> +SetVar R_Context1 0
> +BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context1,\
> + &@R_DoneEvent1, &@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "BS.CreateEvent." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.RegisterDataNotify - Register notification event for configuration." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigDadTransmits,&@R_Status"
> +GetAck
> +GetVar R_Status
> +if { $R_Status == $EFI_SUCCESS } {
> + set assert pass
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.SetData - Call SetData to set DadXmits 10." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +} elseif { $R_Status == $EFI_NOT_READY } {
> + set i 0
> + set L_TimeOut 30
> + while { 1 > 0 } {
> + GetVar R_Context1
> + if { $R_Context1 == 1 } {
> + break
> + } elseif { $i == $L_TimeOut } {
> + set assert fail
> + RecordAssertion $assert $GenericAssertionGuid \
> + "SetData failed.(event hasn't been signaled before TIMEOUT)." \
> + "TIMEOUT value is $L_TimeOut (sec), "
> +
> + SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_GETDATA_CONF5
> + EndLog
> + return
> + }
> + incr i
> + Stall 1
> + }
> +} else {
> + set assert fail
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.SetData - Call SetData to set DadXmits 10." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> + SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_GETDATA_CONF5
> + EndLog
> + return
> +}
> +
> +Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigDadTransmits,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.GetData - Call GetData to get DadXmits value." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +GetVar R_Ip6ConfigDadTransmits.DupAddrDetectTransmits
> +if { ${R_Ip6ConfigDadTransmits.DupAddrDetectTransmits} == 20 } {
> + set assert pass
> +} else {
> + set assert fail
> +
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Set DadXmits succeeds(event is signaled correctly and data correct)."
> + SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_GETDATA_CONF5
> + EndLog
> + return
> +}
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Set DadXmits succeeds(event is signaled correctly and data correct)."
> +
> +#
> +# Check Point : Set Manual Address with valid parameter
> +#
> +EFI_IP6_CONFIG_MANUAL_ADDRESS R_Temp_Ip6ConfigManualAddress
> +
> +set L_ManualListLen 1
> +EFI_IP6_CONFIG_MANUAL_ADDRESS R_Ip6ConfigManualAddress
> +set L_UnitLen [Sizeof EFI_IP6_CONFIG_MANUAL_ADDRESS]
> +set L_ListLen [expr {$L_UnitLen * $L_ManualListLen}]
> +SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
> +SetVar R_Ip6ConfigDataSize $L_ListLen
> +SetVar R_Temp_Ip6ConfigManualAddress.IsAnycast FALSE
> +SetVar R_Temp_Ip6ConfigManualAddress.PrefixLength 64
> +SetIpv6Address R_Temp_Ip6ConfigManualAddress.Address "2002::5000"
> +SetVar R_Ip6ConfigManualAddress @R_Temp_Ip6ConfigManualAddress
> +
> +Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigManualAddress,&@R_Status"
> +GetAck
> +GetVar R_Status
> +if { $R_Status == $EFI_NOT_READY } {
> + set assert pass
> +} else {
> + set assert fail
> +
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.SetData - Call SetData to set manual address with valid parameter." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_NOT_READY"
> + SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_GETDATA_CONF5
> + EndLog
> + return
> +}
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.SetData - Call SetData to set manual address with valid parameter." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_NOT_READY"
> +
> +#
> +# Check Point : Get Manual Address with valid parameter before the former setting finishes
> +#
> +set L_ManualListLen 1
> +set L_UnitLen [Sizeof EFI_IP6_CONFIG_MANUAL_ADDRESS]
> +set L_ListLen [expr {$L_UnitLen * $L_ManualListLen}]
> +SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
> +SetVar R_Ip6ConfigDataSize $L_ListLen
> +
> +Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigManualAddress,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_NOT_READY]
> +RecordAssertion $assert $Ip6ConfigGetDataConf5AssertionGuid001 \
> + "Ip6Config.SetData - Call GetData to get manual address before the former setting finishes." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_NOT_READY"
> +
> +#
> +# Make sure the former configurations succeeds
> +# (Eliminate the side-effect to other cases)
> +#
> +set i 0
> +set L_TimeOut 30
> +Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigManualAddress,&@R_Status"
> +GetAck
> +GetVar R_Status
> +set assert pass
> +while { $R_Status == $EFI_NOT_READY } {
> + Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigManualAddress,&@R_Status"
> + GetAck
> + GetVar R_Status
> + if { $R_Status == $EFI_SUCCESS } {
> + break
> + } elseif { $i == $L_TimeOut } {
> + set assert fail
> +
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.SetData - former SetData finishes." \
> + "TimeUsed - $i, TimeOut Value- $L_TimeOut"
> + SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_GETDATA_CONF5
> + EndLog
> + return
> + }
> + incr i
> + Stall 1
> +}
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.SetData - former SetData finishes." \
> + "TimeUsed - $i, TimeOut Value- $L_TimeOut"
> +
> +
> +#
> +# Set automatic policy (this will clean up all address information configured)
> +#
> +SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> +SetVar R_Ip6ConfigDataSize [Sizeof UINT32]
> +SetVar R_Ip6ConfigPolicy $IP6CP(Automatic)
> +
> +SetVar R_Context 0
> +
> +Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_Status"
> +GetAck
> +GetVar R_Status
> +if { $R_Status == $EFI_SUCCESS } {
> + set assert pass
> +} elseif { $R_Status == $EFI_NOT_READY } {
> + set i 0
> + set L_TimeOut 30
> + set assert pass
> + while { 1 > 0 } {
> + GetVar R_Context
> + if { $R_Context == 1 } {
> + break
> + } elseif { $i == $L_TimeOut } {
> + set assert fail
> +
> + SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> + GetAck
> +
> + EndScope _IP6CONFIG_GETDATA_CONF5
> + EndLog
> + return
> + }
> + incr i
> + Stall 1
> + }
> +} else {
> + set assert fail
> +
> + SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> + GetAck
> +
> + EndScope _IP6CONFIG_GETDATA_CONF5
> + EndLog
> + return
> +}
> +
> +Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_Status"
> +GetAck
> +GetVar R_Ip6ConfigPolicy
> +if { $R_Ip6ConfigPolicy == $IP6CP(Automatic) } {
> + set assert pass
> +} else {
> + set assert fail
> +
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.SetData - Set automatic policy to clean up the former configuration." \
> + "TimeUsed - $i, TimeOut Value- $L_TimeOut"
> +
> + SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> + GetAck
> +
> + EndScope _IP6CONFIG_GETDATA_CONF5
> + EndLog
> + return
> +}
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.SetData - Set automatic policy to clean up the former configuration." \
> + "TimeUsed - $i, TimeOut Value- $L_TimeOut"
> +
> +#
> +# Clean up
> +#
> +SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> +Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.UnregisterDataNotify - Unregister notification event for configuration." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +BS->CloseEvent {@R_DoneEvent,&@R_Status}
> +GetAck
> +
> +SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> +Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.UnregisterDataNotify - Unregister notification event for configuration." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> +GetAck
> +
> +EndScope _IP6CONFIG_GETDATA_CONF5
> +
> EndLog
> \ No newline at end of file
> diff --git a/uefi-sct/EMS/Bin/TestCase/IP6Config/GetData.Func1.Case1.tcl b/uefi-sct/EMS/Bin/TestCase/IP6Config/GetData.Func1.Case1.tcl
> index 6c4a72b..a0acc20 100644
> --- a/uefi-sct/EMS/Bin/TestCase/IP6Config/GetData.Func1.Case1.tcl
> +++ b/uefi-sct/EMS/Bin/TestCase/IP6Config/GetData.Func1.Case1.tcl
> @@ -1,272 +1,272 @@
> -#
> -# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
> -# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
> -#
> -# This program and the accompanying materials
> -# are licensed and made available under the terms and conditions of the BSD License
> -# which accompanies this distribution. The full text of the license may be found at
> -# http://opensource.org/licenses/bsd-license.php
> -#
> -# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> -# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
> -#
> -################################################################################
> -CaseLevel FUNCTION
> -CaseAttribute AUTO
> -CaseVerboseLevel DEFAULT
> -set reportfile report.csv
> -
> -#
> -# test case Name, category, description, GUID...
> -#
> -CaseGuid E4CD5B45-9CF5-4938-A243-7764F1E8CDE9
> -CaseName GetData.Func1.Case1
> -CaseCategory IP6Config
> -CaseDescription {GetData must succeed with valid parameters.}
> -
> -################################################################################
> -Include IP6Config/Include/Ip6Config.inc.tcl
> -
> -
> -#
> -# Begin log ...
> -#
> -BeginLog
> -
> -#
> -# BeginScope
> -#
> -BeginScope _IP6CONFIG_GETDATA_FUNC1
> -
> -#
> -# Parameter Definition
> -# R_ represents "Remote EFI Side Parameter"
> -# L_ represents "Local ENTS Side Parameter"
> -#
> -UINTN R_Status
> -UINTN R_Context
> -UINTN R_Context1
> -UINTN R_DoneEvent
> -UINTN R_DoneEvent1
> -UINTN R_Ip6ConfigDataSize
> -UINT32 R_Ip6ConfigDataType
> -EFI_IP6_CONFIG_INTERFACE_INFO R_Ip6ConfigInterfaceInfo
> -EFI_IP6_CONFIG_INTERFACE_ID R_Ip6ConfigInterfaceId
> -UINT32 R_Ip6ConfigPolicy
> -EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS R_Ip6ConfigDadTransmits
> -
> -#
> -# Check Point: Call Ip6Config->GetData to set AltInterfaceId
> -#
> -SetVar R_Ip6ConfigDataType $IP6CDT(AltInterfaceId)
> -SetVar R_Ip6ConfigDataSize [Sizeof EFI_IP6_CONFIG_INTERFACE_ID]
> -SetVar R_Ip6ConfigInterfaceId.Id(0) 0
> -SetVar R_Ip6ConfigInterfaceId.Id(1) 1
> -SetVar R_Ip6ConfigInterfaceId.Id(2) 2
> -SetVar R_Ip6ConfigInterfaceId.Id(3) 3
> -SetVar R_Ip6ConfigInterfaceId.Id(4) 4
> -SetVar R_Ip6ConfigInterfaceId.Id(5) 5
> -SetVar R_Ip6ConfigInterfaceId.Id(6) 6
> -SetVar R_Ip6ConfigInterfaceId.Id(7) 7
> -
> -SetVar R_Context 0
> -BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context,\
> - &@R_DoneEvent, &@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "BS.CreateEvent." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.RegisterDataNotify - Register notification event for configuration." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigInterfaceId,&@R_Status"
> -GetAck
> -GetVar R_Status
> -if { $R_Status == $EFI_SUCCESS } {
> - set assert pass
> - RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.GetData - Call GetData to set AltInterfaceId." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -} elseif { $R_Status == $EFI_NOT_READY } {
> - set i 0
> - set L_TimeOut 30
> - while { 1 > 0 } {
> - GetVar R_Context
> - if { $R_Context == 1 } {
> - break
> - } elseif { $i == $L_TimeOut } {
> - set assert fail
> - RecordAssertion $assert $GenericAssertionGuid \
> - "GetData failed.(event hasn't been signaled before TIMEOUT)." \
> - "TIMEOUT value is $L_TimeOut (sec), "
> - SetVar R_Ip6ConfigDataType $IP6CDT(AltInterfaceId)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - EndScope _IP6CONFIG_GETDATA_FUNC1
> - EndLog
> - return
> - }
> - incr i
> - Stall 1
> - }
> -} else {
> - set assert fail
> - RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.GetData - Call GetData to set AltInterfaceId." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> - SetVar R_Ip6ConfigDataType $IP6CDT(AltInterfaceId)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - EndScope _IP6CONFIG_GETDATA_FUNC1
> - EndLog
> - return
> -}
> -
> -Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigInterfaceId,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $Ip6ConfigGetDataFunc1AssertionGuid001 \
> - "Ip6Config.GetData - Call GetData to get AltInterfaceId value." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -GetVar R_Ip6ConfigInterfaceId
> -if { ${R_Ip6ConfigInterfaceId.Id(0)} == 0 && ${R_Ip6ConfigInterfaceId.Id(1)} == 1 && ${R_Ip6ConfigInterfaceId.Id(2)} == 2 && ${R_Ip6ConfigInterfaceId.Id(3)} == 3 && ${R_Ip6ConfigInterfaceId.Id(4)} == 4 && ${R_Ip6ConfigInterfaceId.Id(5)} == 5 && ${R_Ip6ConfigInterfaceId.Id(6)} == 6 && ${R_Ip6ConfigInterfaceId.Id(7)} == 7} {
> - set assert pass
> -} else {
> - set assert fail
> -}
> -RecordAssertion $assert $Ip6ConfigGetDataFunc1AssertionGuid002 \
> - "Set AltInterfaceId succeeds(event is signaled correctly and data correct)."
> -
> -#
> -# Check Point: Call Ip6Config->SetData to set DadXmits
> -#
> -SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> -SetVar R_Ip6ConfigDataSize [Sizeof EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS]
> -SetVar R_Ip6ConfigDadTransmits.DupAddrDetectTransmits 3
> -
> -SetVar R_Context1 0
> -BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context1,\
> - &@R_DoneEvent1, &@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "BS.CreateEvent." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.RegisterDataNotify - Register notification event for configuration." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigDadTransmits,&@R_Status"
> -GetAck
> -GetVar R_Status
> -if { $R_Status == $EFI_SUCCESS } {
> - set assert pass
> - RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.GetData - Call GetData to set DadXmits." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -} elseif { $R_Status == $EFI_NOT_READY } {
> - set i 0
> - set L_TimeOut 30
> - while { 1 > 0 } {
> - GetVar R_Context1
> - if { $R_Context1 == 1 } {
> - break
> - } elseif { $i == $L_TimeOut } {
> - set assert fail
> - RecordAssertion $assert $GenericAssertionGuid \
> - "GetData failed.(event hasn't been signaled before TIMEOUT)." \
> - "TIMEOUT value is $L_TimeOut (sec), "
> - SetVar R_Ip6ConfigDataType $IP6CDT(AltInterfaceId)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> - GetAck
> - EndScope _IP6CONFIG_GETDATA_FUNC1
> - EndLog
> - return
> - }
> - incr i
> - Stall 1
> - }
> -} else {
> - set assert fail
> - RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.GetData - Call GetData to set manual DadXmits." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> - SetVar R_Ip6ConfigDataType $IP6CDT(AltInterfaceId)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> - GetAck
> - EndScope _IP6CONFIG_GETDATA_FUNC1
> - EndLog
> - return
> -}
> -
> -Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigDadTransmits,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $Ip6ConfigGetDataFunc1AssertionGuid003 \
> - "Ip6Config.GetData - Call GetData to get DadXmits value." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -GetVar R_Ip6ConfigDadTransmits
> -if { ${R_Ip6ConfigDadTransmits.DupAddrDetectTransmits} == 3 } {
> - set assert pass
> -} else {
> - set assert fail
> -}
> -RecordAssertion $assert $Ip6ConfigGetDataFunc1AssertionGuid004 \
> - "Set DadXmits succeeds(event is signaled correctly and data correct)."
> -
> -#
> -# Clean up
> -#
> -SetVar R_Ip6ConfigDataType $IP6CDT(AltInterfaceId)
> -Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.UnregisterDataNotify - Unregister notification event for configuration." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -BS->CloseEvent {@R_DoneEvent,&@R_Status}
> -GetAck
> -
> -SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> -Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.UnregisterDataNotify - Unregister notification event for configuration." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> -GetAck
> -
> -EndScope _IP6CONFIG_GETDATA_FUNC1
> -
> +#
> +# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
> +# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
> +#
> +# This program and the accompanying materials
> +# are licensed and made available under the terms and conditions of the BSD License
> +# which accompanies this distribution. The full text of the license may be found at
> +# http://opensource.org/licenses/bsd-license.php
> +#
> +# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> +# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
> +#
> +################################################################################
> +CaseLevel FUNCTION
> +CaseAttribute AUTO
> +CaseVerboseLevel DEFAULT
> +set reportfile report.csv
> +
> +#
> +# test case Name, category, description, GUID...
> +#
> +CaseGuid E4CD5B45-9CF5-4938-A243-7764F1E8CDE9
> +CaseName GetData.Func1.Case1
> +CaseCategory IP6Config
> +CaseDescription {GetData must succeed with valid parameters.}
> +
> +################################################################################
> +Include IP6Config/Include/Ip6Config.inc.tcl
> +
> +
> +#
> +# Begin log ...
> +#
> +BeginLog
> +
> +#
> +# BeginScope
> +#
> +BeginScope _IP6CONFIG_GETDATA_FUNC1
> +
> +#
> +# Parameter Definition
> +# R_ represents "Remote EFI Side Parameter"
> +# L_ represents "Local ENTS Side Parameter"
> +#
> +UINTN R_Status
> +UINTN R_Context
> +UINTN R_Context1
> +UINTN R_DoneEvent
> +UINTN R_DoneEvent1
> +UINTN R_Ip6ConfigDataSize
> +UINT32 R_Ip6ConfigDataType
> +EFI_IP6_CONFIG_INTERFACE_INFO R_Ip6ConfigInterfaceInfo
> +EFI_IP6_CONFIG_INTERFACE_ID R_Ip6ConfigInterfaceId
> +UINT32 R_Ip6ConfigPolicy
> +EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS R_Ip6ConfigDadTransmits
> +
> +#
> +# Check Point: Call Ip6Config->GetData to set AltInterfaceId
> +#
> +SetVar R_Ip6ConfigDataType $IP6CDT(AltInterfaceId)
> +SetVar R_Ip6ConfigDataSize [Sizeof EFI_IP6_CONFIG_INTERFACE_ID]
> +SetVar R_Ip6ConfigInterfaceId.Id(0) 0
> +SetVar R_Ip6ConfigInterfaceId.Id(1) 1
> +SetVar R_Ip6ConfigInterfaceId.Id(2) 2
> +SetVar R_Ip6ConfigInterfaceId.Id(3) 3
> +SetVar R_Ip6ConfigInterfaceId.Id(4) 4
> +SetVar R_Ip6ConfigInterfaceId.Id(5) 5
> +SetVar R_Ip6ConfigInterfaceId.Id(6) 6
> +SetVar R_Ip6ConfigInterfaceId.Id(7) 7
> +
> +SetVar R_Context 0
> +BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context,\
> + &@R_DoneEvent, &@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "BS.CreateEvent." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.RegisterDataNotify - Register notification event for configuration." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigInterfaceId,&@R_Status"
> +GetAck
> +GetVar R_Status
> +if { $R_Status == $EFI_SUCCESS } {
> + set assert pass
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.GetData - Call GetData to set AltInterfaceId." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +} elseif { $R_Status == $EFI_NOT_READY } {
> + set i 0
> + set L_TimeOut 30
> + while { 1 > 0 } {
> + GetVar R_Context
> + if { $R_Context == 1 } {
> + break
> + } elseif { $i == $L_TimeOut } {
> + set assert fail
> + RecordAssertion $assert $GenericAssertionGuid \
> + "GetData failed.(event hasn't been signaled before TIMEOUT)." \
> + "TIMEOUT value is $L_TimeOut (sec), "
> + SetVar R_Ip6ConfigDataType $IP6CDT(AltInterfaceId)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_GETDATA_FUNC1
> + EndLog
> + return
> + }
> + incr i
> + Stall 1
> + }
> +} else {
> + set assert fail
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.GetData - Call GetData to set AltInterfaceId." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> + SetVar R_Ip6ConfigDataType $IP6CDT(AltInterfaceId)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_GETDATA_FUNC1
> + EndLog
> + return
> +}
> +
> +Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigInterfaceId,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $Ip6ConfigGetDataFunc1AssertionGuid001 \
> + "Ip6Config.GetData - Call GetData to get AltInterfaceId value." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +GetVar R_Ip6ConfigInterfaceId
> +if { ${R_Ip6ConfigInterfaceId.Id(0)} == 0 && ${R_Ip6ConfigInterfaceId.Id(1)} == 1 && ${R_Ip6ConfigInterfaceId.Id(2)} == 2 && ${R_Ip6ConfigInterfaceId.Id(3)} == 3 && ${R_Ip6ConfigInterfaceId.Id(4)} == 4 && ${R_Ip6ConfigInterfaceId.Id(5)} == 5 && ${R_Ip6ConfigInterfaceId.Id(6)} == 6 && ${R_Ip6ConfigInterfaceId.Id(7)} == 7} {
> + set assert pass
> +} else {
> + set assert fail
> +}
> +RecordAssertion $assert $Ip6ConfigGetDataFunc1AssertionGuid002 \
> + "Set AltInterfaceId succeeds(event is signaled correctly and data correct)."
> +
> +#
> +# Check Point: Call Ip6Config->SetData to set DadXmits
> +#
> +SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> +SetVar R_Ip6ConfigDataSize [Sizeof EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS]
> +SetVar R_Ip6ConfigDadTransmits.DupAddrDetectTransmits 3
> +
> +SetVar R_Context1 0
> +BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context1,\
> + &@R_DoneEvent1, &@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "BS.CreateEvent." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.RegisterDataNotify - Register notification event for configuration." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigDadTransmits,&@R_Status"
> +GetAck
> +GetVar R_Status
> +if { $R_Status == $EFI_SUCCESS } {
> + set assert pass
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.GetData - Call GetData to set DadXmits." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +} elseif { $R_Status == $EFI_NOT_READY } {
> + set i 0
> + set L_TimeOut 30
> + while { 1 > 0 } {
> + GetVar R_Context1
> + if { $R_Context1 == 1 } {
> + break
> + } elseif { $i == $L_TimeOut } {
> + set assert fail
> + RecordAssertion $assert $GenericAssertionGuid \
> + "GetData failed.(event hasn't been signaled before TIMEOUT)." \
> + "TIMEOUT value is $L_TimeOut (sec), "
> + SetVar R_Ip6ConfigDataType $IP6CDT(AltInterfaceId)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_GETDATA_FUNC1
> + EndLog
> + return
> + }
> + incr i
> + Stall 1
> + }
> +} else {
> + set assert fail
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.GetData - Call GetData to set manual DadXmits." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> + SetVar R_Ip6ConfigDataType $IP6CDT(AltInterfaceId)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_GETDATA_FUNC1
> + EndLog
> + return
> +}
> +
> +Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigDadTransmits,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $Ip6ConfigGetDataFunc1AssertionGuid003 \
> + "Ip6Config.GetData - Call GetData to get DadXmits value." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +GetVar R_Ip6ConfigDadTransmits
> +if { ${R_Ip6ConfigDadTransmits.DupAddrDetectTransmits} == 3 } {
> + set assert pass
> +} else {
> + set assert fail
> +}
> +RecordAssertion $assert $Ip6ConfigGetDataFunc1AssertionGuid004 \
> + "Set DadXmits succeeds(event is signaled correctly and data correct)."
> +
> +#
> +# Clean up
> +#
> +SetVar R_Ip6ConfigDataType $IP6CDT(AltInterfaceId)
> +Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.UnregisterDataNotify - Unregister notification event for configuration." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +BS->CloseEvent {@R_DoneEvent,&@R_Status}
> +GetAck
> +
> +SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> +Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.UnregisterDataNotify - Unregister notification event for configuration." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> +GetAck
> +
> +EndScope _IP6CONFIG_GETDATA_FUNC1
> +
> EndLog
> \ No newline at end of file
> diff --git a/uefi-sct/EMS/Bin/TestCase/IP6Config/Include/Ip6Config.inc.tcl b/uefi-sct/EMS/Bin/TestCase/IP6Config/Include/Ip6Config.inc.tcl
> index 918038d..9e162e7 100644
> --- a/uefi-sct/EMS/Bin/TestCase/IP6Config/Include/Ip6Config.inc.tcl
> +++ b/uefi-sct/EMS/Bin/TestCase/IP6Config/Include/Ip6Config.inc.tcl
> @@ -1,96 +1,96 @@
> -#
> -# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
> -# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
> -#
> -# This program and the accompanying materials
> -# are licensed and made available under the terms and conditions of the BSD License
> -# which accompanies this distribution. The full text of the license may be found at
> -# http://opensource.org/licenses/bsd-license.php
> -#
> -# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> -# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
> -#
> -if {[info exist IP6CONFIG_INC] == 1} {
> - return
> -}
> -set IP6CONFIG_INC 1
> -
> -Include Include/EntsProtocolTest.inc.tcl
> -Include Include/EntsConfigure.tcl
> -Include Include/EfiBootService.inc.tcl
> -Include Include/EfiGenericService.inc.tcl
> -Include EfiUtil/EfiInclude.tcl
> -
> -Include IP6/Include/Ip6.inc.tcl
> -Include IP6Config/Include/Ip6ConfigDefine.tcl
> -Include IP6Config/Include/Ip6Config.proc.tcl
> -Include IP6Config/Include/Ip6ConfigAssertionGuid.tcl
> -Include Include/GenericAssertionGuid.tcl
> -
> -###################################################################
> -# Function Declaration
> -###################################################################
> -Func Ip6Config->SetData {
> - UINT32
> - UINTN
> - POINTER
> - POINTER
> -}
> -
> -Func Ip6Config->GetData {
> - UINT32
> - POINTER
> - POINTER
> - POINTER
> -}
> -
> -Func Ip6Config->RegisterDataNotify {
> - UINT32
> - UINTN
> - POINTER
> -}
> -
> -Func Ip6Config->UnregisterDataNotify {
> - UINT32
> - UINTN
> - POINTER
> -}
> -
> -
> -###################################################################
> -# EFI_IP6_CONFIG_INTERFACE_INFO
> -###################################################################
> -Struct EFI_IP6_CONFIG_INTERFACE_INFO {
> - CHAR16 Name(32);
> - UINT8 IfType;
> - UINT32 HwAddressSize;
> - EFI_MAC_ADDRESS HwAddress;
> - UINT32 AddressInfoCount;
> - POINTER AddressInfo;
> - UINT32 RouteCount;
> - POINTER RouteTable;
> -}
> -
> -###################################################################
> -# EFI_IP6_CONFIG_INTERFACE_ID
> -###################################################################
> -Struct EFI_IP6_CONFIG_INTERFACE_ID {
> - UINT8 Id(8);
> -}
> -
> -###################################################################
> -# EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS
> -###################################################################
> -Struct EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS {
> - UINT32 DupAddrDetectTransmits;
> -}
> -
> -###################################################################
> -# EFI_IP6_CONFIG_MANUAL_ADDRESS
> -###################################################################
> -Struct EFI_IP6_CONFIG_MANUAL_ADDRESS {
> - EFI_IPv6_ADDRESS Address;
> - BOOLEAN IsAnycast;
> - UINT8 PrefixLength;
> -}
> -
> +#
> +# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
> +# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
> +#
> +# This program and the accompanying materials
> +# are licensed and made available under the terms and conditions of the BSD License
> +# which accompanies this distribution. The full text of the license may be found at
> +# http://opensource.org/licenses/bsd-license.php
> +#
> +# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> +# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
> +#
> +if {[info exist IP6CONFIG_INC] == 1} {
> + return
> +}
> +set IP6CONFIG_INC 1
> +
> +Include Include/EntsProtocolTest.inc.tcl
> +Include Include/EntsConfigure.tcl
> +Include Include/EfiBootService.inc.tcl
> +Include Include/EfiGenericService.inc.tcl
> +Include EfiUtil/EfiInclude.tcl
> +
> +Include IP6/Include/Ip6.inc.tcl
> +Include IP6Config/Include/Ip6ConfigDefine.tcl
> +Include IP6Config/Include/Ip6Config.proc.tcl
> +Include IP6Config/Include/Ip6ConfigAssertionGuid.tcl
> +Include Include/GenericAssertionGuid.tcl
> +
> +###################################################################
> +# Function Declaration
> +###################################################################
> +Func Ip6Config->SetData {
> + UINT32
> + UINTN
> + POINTER
> + POINTER
> +}
> +
> +Func Ip6Config->GetData {
> + UINT32
> + POINTER
> + POINTER
> + POINTER
> +}
> +
> +Func Ip6Config->RegisterDataNotify {
> + UINT32
> + UINTN
> + POINTER
> +}
> +
> +Func Ip6Config->UnregisterDataNotify {
> + UINT32
> + UINTN
> + POINTER
> +}
> +
> +
> +###################################################################
> +# EFI_IP6_CONFIG_INTERFACE_INFO
> +###################################################################
> +Struct EFI_IP6_CONFIG_INTERFACE_INFO {
> + CHAR16 Name(32);
> + UINT8 IfType;
> + UINT32 HwAddressSize;
> + EFI_MAC_ADDRESS HwAddress;
> + UINT32 AddressInfoCount;
> + POINTER AddressInfo;
> + UINT32 RouteCount;
> + POINTER RouteTable;
> +}
> +
> +###################################################################
> +# EFI_IP6_CONFIG_INTERFACE_ID
> +###################################################################
> +Struct EFI_IP6_CONFIG_INTERFACE_ID {
> + UINT8 Id(8);
> +}
> +
> +###################################################################
> +# EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS
> +###################################################################
> +Struct EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS {
> + UINT32 DupAddrDetectTransmits;
> +}
> +
> +###################################################################
> +# EFI_IP6_CONFIG_MANUAL_ADDRESS
> +###################################################################
> +Struct EFI_IP6_CONFIG_MANUAL_ADDRESS {
> + EFI_IPv6_ADDRESS Address;
> + BOOLEAN IsAnycast;
> + UINT8 PrefixLength;
> +}
> +
> diff --git a/uefi-sct/EMS/Bin/TestCase/IP6Config/Include/Ip6Config.proc.tcl b/uefi-sct/EMS/Bin/TestCase/IP6Config/Include/Ip6Config.proc.tcl
> index de40066..f2a2dda 100644
> --- a/uefi-sct/EMS/Bin/TestCase/IP6Config/Include/Ip6Config.proc.tcl
> +++ b/uefi-sct/EMS/Bin/TestCase/IP6Config/Include/Ip6Config.proc.tcl
> @@ -1,16 +1,16 @@
> -#
> -# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
> -# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
> -#
> -# This program and the accompanying materials
> -# are licensed and made available under the terms and conditions of the BSD License
> -# which accompanies this distribution. The full text of the license may be found at
> -# http://opensource.org/licenses/bsd-license.php
> -#
> -# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> -# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
> -#
> -if {[info exist IP6CONFIG_PROC] == 1} {
> - return
> -}
> +#
> +# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
> +# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
> +#
> +# This program and the accompanying materials
> +# are licensed and made available under the terms and conditions of the BSD License
> +# which accompanies this distribution. The full text of the license may be found at
> +# http://opensource.org/licenses/bsd-license.php
> +#
> +# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> +# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
> +#
> +if {[info exist IP6CONFIG_PROC] == 1} {
> + return
> +}
> set IP6CONFIG_PROC 1
> \ No newline at end of file
> diff --git a/uefi-sct/EMS/Bin/TestCase/IP6Config/Include/Ip6ConfigAssertionGuid.tcl b/uefi-sct/EMS/Bin/TestCase/IP6Config/Include/Ip6ConfigAssertionGuid.tcl
> index 9356240..da69bf9 100644
> --- a/uefi-sct/EMS/Bin/TestCase/IP6Config/Include/Ip6ConfigAssertionGuid.tcl
> +++ b/uefi-sct/EMS/Bin/TestCase/IP6Config/Include/Ip6ConfigAssertionGuid.tcl
> @@ -1,84 +1,96 @@
> -#
> -# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
> -# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
> -#
> -# This program and the accompanying materials
> -# are licensed and made available under the terms and conditions of the BSD License
> -# which accompanies this distribution. The full text of the license may be found at
> -# http://opensource.org/licenses/bsd-license.php
> -#
> -# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> -# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
> -#
> -#
> -# Guid for SetData() interface
> -#
> -set Ip6ConfigSetDataConf1AssertionGuid001 7A224CCE-B79B-472a-9B8C-A47E074D5EEF
> -set Ip6ConfigSetDataConf2AssertionGuid001 46F12872-61F2-46e4-A2F9-5F685B419479
> -set Ip6ConfigSetDataConf2AssertionGuid002 1CAC93D3-732A-4e30-894D-EE63B6F486A0
> -set Ip6ConfigSetDataConf2AssertionGuid003 D005EBF3-CFD6-498a-9005-C2B3702EB4FC
> -set Ip6ConfigSetDataConf2AssertionGuid004 389806D5-4506-4319-8D17-9B4FC9D97E25
> -set Ip6ConfigSetDataConf2AssertionGuid005 5AEFDB0C-322F-49c3-9DD2-DFE21B66B308
> -set Ip6ConfigSetDataConf2AssertionGuid006 D339988F-2595-4fb5-81AE-A94DC470B234
> -set Ip6ConfigSetDataConf3AssertionGuid001 4319A43B-7641-47c0-84BB-985C479902A2
> -set Ip6ConfigSetDataConf4AssertionGuid001 01F3B344-EB52-4086-B949-55D7E4DC5BDE
> -set Ip6ConfigSetDataConf4AssertionGuid002 F612AF26-2519-497c-B205-37A2914AEE05
> -set Ip6ConfigSetDataConf4AssertionGuid003 592C1F3D-249E-4654-B4B1-600421624DD1
> -set Ip6ConfigSetDataConf5AssertionGuid001 D70BEC29-8026-4e1b-BA8B-36A313B45859
> -set Ip6ConfigSetDataConf5AssertionGuid002 FE793490-53F8-4991-8348-E624530E83E9
> -set Ip6ConfigSetDataConf5AssertionGuid003 42CCB2EF-D706-4d1a-B247-F42BBA99F707
> -set Ip6ConfigSetDataConf5AssertionGuid004 9168CB20-C891-42da-BB9F-7ADBE488B012
> -set Ip6ConfigSetDataConf5AssertionGuid005 AD058D87-1015-4b2d-A351-5BD4B0930B7B
> -set Ip6ConfigSetDataConf5AssertionGuid006 388BE3F6-D63E-4cbf-A3D9-3D941823259B
> -set Ip6ConfigSetDataConf6AssertionGuid001 2886BAE1-383A-400f-8F88-66376B2A0FF5
> -set Ip6ConfigSetDataConf7AssertionGuid001 D2C61F06-8822-4a09-89A1-7F0667FCAF0E
> -set Ip6ConfigSetDataFunc1AssertionGuid001 0A5902DA-4142-4494-AC66-2B731FFEA671
> -set Ip6ConfigSetDataFunc1AssertionGuid002 D9A9EF5E-D819-49d0-BB12-25ADEC52DDB3
> -set Ip6ConfigSetDataFunc1AssertionGuid003 14E96019-0815-4486-916C-E440E166628E
> -set Ip6ConfigSetDataFunc1AssertionGuid004 3458BBE0-0D7E-48ec-B380-2A885F44E104
> -
> -
> -#
> -# Guid for GetData() interface
> -#
> -set Ip6ConfigGetDataConf1AssertionGuid001 D15E421D-6228-4fea-8D5A-330FFF3F80D2
> -set Ip6ConfigGetDataConf2AssertionGuid001 38B36C04-12E9-4e96-B24F-C453851E6C1D
> -set Ip6ConfigGetDataConf3AssertionGuid001 D05A6C59-617F-4549-9659-4E0CFC3C3336
> -set Ip6ConfigGetDataConf3AssertionGuid002 ED45C2FE-9EC1-4553-AFA4-771E9D4F7611
> -set Ip6ConfigGetDataConf4AssertionGuid001 59118C46-2F2A-4029-ABD6-767418920369
> -set Ip6ConfigGetDataConf5AssertionGuid001 55955D09-C806-4777-9FF0-95C00E79AC28
> -set Ip6ConfigGetDataFunc1AssertionGuid001 FEAAC1A0-95BD-4dcb-91C3-9F08504BEFA1
> -set Ip6ConfigGetDataFunc1AssertionGuid002 3649D729-D6D0-456e-84AE-C7E7B8464343
> -set Ip6ConfigGetDataFunc1AssertionGuid003 165E79B4-C987-4100-8AA2-8AB115B07FAD
> -set Ip6ConfigGetDataFunc1AssertionGuid004 DB420311-17F7-40cf-A0B1-0294D5DCCC92
> -
> -#
> -# Guid for RegisterDataNotify() interface
> -#
> -set Ip6ConfigRegisterDataNotifyConf1AssertionGuid001 7E3F6157-EC75-4ecd-A79B-4926F3AA1C0D
> -set Ip6ConfigRegisterDataNotifyConf2AssertionGuid001 70DC8C71-C54D-4446-8AD9-BAC086E43D17
> -set Ip6ConfigRegisterDataNotifyConf3AssertionGuid001 2D88F18B-0BEF-4616-BDE5-CA4E0086E1D3
> -set Ip6ConfigRegisterDataNotifyFunc1AssertionGuid001 9A98DC85-D018-45aa-B851-34EE2F6716D4
> -set Ip6ConfigRegisterDataNotifyFunc1AssertionGuid002 39F7FB37-9F9F-485e-8DBC-0F3191DA9909
> -set Ip6ConfigRegisterDataNotifyFunc1AssertionGuid003 D13DA599-37E7-474a-9343-83C9EFE80893
> -set Ip6ConfigRegisterDataNotifyFunc1AssertionGuid004 5428BDD5-4332-4e3b-841F-3E60540AA35D
> -set Ip6ConfigRegisterDataNotifyFunc1AssertionGuid005 1844A7C8-730C-4927-8E02-CE0A6CA08DCC
> -set Ip6ConfigRegisterDataNotifyFunc1AssertionGuid006 B0E66591-9076-48e3-8DF6-2A1D59A572DB
> -
> -
> -#
> -# Guid for UnregisterDataNotify() interface
> -#
> -set Ip6ConfigUnregisterDataNotifyConf1AssertionGuid001 8AB0E5A2-A4E1-4282-87B5-E377C763AD2F
> -set Ip6ConfigUnregisterDataNotifyConf2AssertionGuid001 5C68228F-AAAE-4d0b-9927-7664476EF360
> -set Ip6ConfigUnregisterDataNotifyConf2AssertionGuid002 55D8193E-F58E-4800-924B-73C902098DD8
> -set Ip6ConfigUnregisterDataNotifyFunc1AssertionGuid001 42EB4628-8DF6-4704-81E5-F7EAE6CBB270
> -set Ip6ConfigUnregisterDataNotifyFunc1AssertionGuid002 174CEC07-E573-434b-8E99-77F8AE9C55B5
> -set Ip6ConfigUnregisterDataNotifyFunc1AssertionGuid003 1F5EF1AF-8A19-48d6-831F-51BE00B32AA5
> -set Ip6ConfigUnregisterDataNotifyFunc1AssertionGuid004 388C8838-7790-4a1f-9DB7-5017D7AA60DB
> -
> -
> -
> -
> -
> -
> +#
> +# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
> +# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
> +#
> +# This program and the accompanying materials
> +# are licensed and made available under the terms and conditions of the BSD License
> +# which accompanies this distribution. The full text of the license may be found at
> +# http://opensource.org/licenses/bsd-license.php
> +#
> +# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> +# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
> +#
> +#
> +# Guid for SetData() interface
> +#
> +set Ip6ConfigSetDataConf1AssertionGuid001 7A224CCE-B79B-472a-9B8C-A47E074D5EEF
> +set Ip6ConfigSetDataConf2AssertionGuid001 46F12872-61F2-46e4-A2F9-5F685B419479
> +set Ip6ConfigSetDataConf2AssertionGuid002 1CAC93D3-732A-4e30-894D-EE63B6F486A0
> +set Ip6ConfigSetDataConf2AssertionGuid003 D005EBF3-CFD6-498a-9005-C2B3702EB4FC
> +set Ip6ConfigSetDataConf2AssertionGuid004 389806D5-4506-4319-8D17-9B4FC9D97E25
> +set Ip6ConfigSetDataConf2AssertionGuid005 5AEFDB0C-322F-49c3-9DD2-DFE21B66B308
> +set Ip6ConfigSetDataConf2AssertionGuid006 D339988F-2595-4fb5-81AE-A94DC470B234
> +set Ip6ConfigSetDataConf3AssertionGuid001 4319A43B-7641-47c0-84BB-985C479902A2
> +set Ip6ConfigSetDataConf4AssertionGuid001 01F3B344-EB52-4086-B949-55D7E4DC5BDE
> +set Ip6ConfigSetDataConf4AssertionGuid002 F612AF26-2519-497c-B205-37A2914AEE05
> +set Ip6ConfigSetDataConf4AssertionGuid003 592C1F3D-249E-4654-B4B1-600421624DD1
> +set Ip6ConfigSetDataConf5AssertionGuid001 D70BEC29-8026-4e1b-BA8B-36A313B45859
> +set Ip6ConfigSetDataConf5AssertionGuid002 FE793490-53F8-4991-8348-E624530E83E9
> +set Ip6ConfigSetDataConf5AssertionGuid003 42CCB2EF-D706-4d1a-B247-F42BBA99F707
> +set Ip6ConfigSetDataConf5AssertionGuid004 9168CB20-C891-42da-BB9F-7ADBE488B012
> +set Ip6ConfigSetDataConf5AssertionGuid005 AD058D87-1015-4b2d-A351-5BD4B0930B7B
> +set Ip6ConfigSetDataConf5AssertionGuid006 388BE3F6-D63E-4cbf-A3D9-3D941823259B
> +set Ip6ConfigSetDataConf6AssertionGuid001 2886BAE1-383A-400f-8F88-66376B2A0FF5
> +set Ip6ConfigSetDataConf7AssertionGuid001 D2C61F06-8822-4a09-89A1-7F0667FCAF0E
> +set Ip6ConfigSetDataFunc1AssertionGuid001 0A5902DA-4142-4494-AC66-2B731FFEA671
> +set Ip6ConfigSetDataFunc1AssertionGuid002 D9A9EF5E-D819-49d0-BB12-25ADEC52DDB3
> +set Ip6ConfigSetDataFunc1AssertionGuid003 14E96019-0815-4486-916C-E440E166628E
> +set Ip6ConfigSetDataFunc1AssertionGuid004 3458BBE0-0D7E-48ec-B380-2A885F44E104
> +
> +set Ip6ConfigSetDataFunc2AssertionGuid001 B533A7CF-6C27-421A-A816-B075E7EA4573
> +set Ip6ConfigSetDataFunc2AssertionGuid002 C816C0EE-52C0-400E-A9CC-25C263E27B04
> +set Ip6ConfigSetDataFunc2AssertionGuid003 2CF2435A-C444-4E09-BC8A-56A6F33CED9C
> +set Ip6ConfigSetDataFunc2AssertionGuid004 3B673875-4CE8-4F23-8FE1-E440376604FD
> +set Ip6ConfigSetDataFunc2AssertionGuid005 05B7BF41-9CE9-481B-B9A4-2E83AD5E89E3
> +set Ip6ConfigSetDataFunc2AssertionGuid006 4D49A668-A44D-4D69-9F20-40B7F147988E
> +set Ip6ConfigSetDataFunc2AssertionGuid007 23000969-DFDE-4B04-AD44-0844D595AA66
> +set Ip6ConfigSetDataFunc2AssertionGuid008 E444B75C-B559-48C4-8D15-8F882AC7F81E
> +set Ip6ConfigSetDataFunc2AssertionGuid009 AC649D07-2063-4045-9DAE-29B4E38E46BB
> +set Ip6ConfigSetDataFunc2AssertionGuid010 4EDBB740-405F-4E6D-A4A5-D77122D16278
> +set Ip6ConfigSetDataFunc2AssertionGuid011 D131A6D9-CCAB-4460-8402-80ED252FEB09
> +set Ip6ConfigSetDataFunc2AssertionGuid012 A5D75088-D8D3-47DD-A623-F6098DF70546
> +
> +#
> +# Guid for GetData() interface
> +#
> +set Ip6ConfigGetDataConf1AssertionGuid001 D15E421D-6228-4fea-8D5A-330FFF3F80D2
> +set Ip6ConfigGetDataConf2AssertionGuid001 38B36C04-12E9-4e96-B24F-C453851E6C1D
> +set Ip6ConfigGetDataConf3AssertionGuid001 D05A6C59-617F-4549-9659-4E0CFC3C3336
> +set Ip6ConfigGetDataConf3AssertionGuid002 ED45C2FE-9EC1-4553-AFA4-771E9D4F7611
> +set Ip6ConfigGetDataConf4AssertionGuid001 59118C46-2F2A-4029-ABD6-767418920369
> +set Ip6ConfigGetDataConf5AssertionGuid001 55955D09-C806-4777-9FF0-95C00E79AC28
> +set Ip6ConfigGetDataFunc1AssertionGuid001 FEAAC1A0-95BD-4dcb-91C3-9F08504BEFA1
> +set Ip6ConfigGetDataFunc1AssertionGuid002 3649D729-D6D0-456e-84AE-C7E7B8464343
> +set Ip6ConfigGetDataFunc1AssertionGuid003 165E79B4-C987-4100-8AA2-8AB115B07FAD
> +set Ip6ConfigGetDataFunc1AssertionGuid004 DB420311-17F7-40cf-A0B1-0294D5DCCC92
> +
> +#
> +# Guid for RegisterDataNotify() interface
> +#
> +set Ip6ConfigRegisterDataNotifyConf1AssertionGuid001 7E3F6157-EC75-4ecd-A79B-4926F3AA1C0D
> +set Ip6ConfigRegisterDataNotifyConf2AssertionGuid001 70DC8C71-C54D-4446-8AD9-BAC086E43D17
> +set Ip6ConfigRegisterDataNotifyConf3AssertionGuid001 2D88F18B-0BEF-4616-BDE5-CA4E0086E1D3
> +set Ip6ConfigRegisterDataNotifyFunc1AssertionGuid001 9A98DC85-D018-45aa-B851-34EE2F6716D4
> +set Ip6ConfigRegisterDataNotifyFunc1AssertionGuid002 39F7FB37-9F9F-485e-8DBC-0F3191DA9909
> +set Ip6ConfigRegisterDataNotifyFunc1AssertionGuid003 D13DA599-37E7-474a-9343-83C9EFE80893
> +set Ip6ConfigRegisterDataNotifyFunc1AssertionGuid004 5428BDD5-4332-4e3b-841F-3E60540AA35D
> +set Ip6ConfigRegisterDataNotifyFunc1AssertionGuid005 1844A7C8-730C-4927-8E02-CE0A6CA08DCC
> +set Ip6ConfigRegisterDataNotifyFunc1AssertionGuid006 B0E66591-9076-48e3-8DF6-2A1D59A572DB
> +
> +
> +#
> +# Guid for UnregisterDataNotify() interface
> +#
> +set Ip6ConfigUnregisterDataNotifyConf1AssertionGuid001 8AB0E5A2-A4E1-4282-87B5-E377C763AD2F
> +set Ip6ConfigUnregisterDataNotifyConf2AssertionGuid001 5C68228F-AAAE-4d0b-9927-7664476EF360
> +set Ip6ConfigUnregisterDataNotifyConf2AssertionGuid002 55D8193E-F58E-4800-924B-73C902098DD8
> +set Ip6ConfigUnregisterDataNotifyFunc1AssertionGuid001 42EB4628-8DF6-4704-81E5-F7EAE6CBB270
> +set Ip6ConfigUnregisterDataNotifyFunc1AssertionGuid002 174CEC07-E573-434b-8E99-77F8AE9C55B5
> +set Ip6ConfigUnregisterDataNotifyFunc1AssertionGuid003 1F5EF1AF-8A19-48d6-831F-51BE00B32AA5
> +set Ip6ConfigUnregisterDataNotifyFunc1AssertionGuid004 388C8838-7790-4a1f-9DB7-5017D7AA60DB
> +
> +
> +
> +
> +
> +
> diff --git a/uefi-sct/EMS/Bin/TestCase/IP6Config/Include/Ip6ConfigDefine.tcl b/uefi-sct/EMS/Bin/TestCase/IP6Config/Include/Ip6ConfigDefine.tcl
> index 0d78321..1fcd579 100644
> --- a/uefi-sct/EMS/Bin/TestCase/IP6Config/Include/Ip6ConfigDefine.tcl
> +++ b/uefi-sct/EMS/Bin/TestCase/IP6Config/Include/Ip6ConfigDefine.tcl
> @@ -1,51 +1,51 @@
> -#
> -# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
> -# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
> -#
> -# This program and the accompanying materials
> -# are licensed and made available under the terms and conditions of the BSD License
> -# which accompanies this distribution. The full text of the license may be found at
> -# http://opensource.org/licenses/bsd-license.php
> -#
> -# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> -# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
> -#
> -if {[info exist IP6CONFIG_DEFINE] == 1} {
> - return
> -}
> -set IP6CONFIG_DEFINE 1
> -
> -#
> -# EUT/ENTS Connection Definition
> -#
> -#set DEF_EUT_IP_ADDR "2002:0000:0000:0000:0000:0000:0000:0001"
> -#set DEF_EUT_MAC_ADDR [GetTargetMac]
> -#set DEF_EUT_PRT 0
> -
> -#set DEF_ENTS_IP_ADDR "2002:0000:0000:0000:0000:0000:0000:4321"
> -#set DEF_ENTS_MAC_ADDR [GetHostMac]
> -#set DEF_ENTS_PRT 8888
> -
> -#
> -# EFI_IP6_CONFIG_DATA_TYPE
> -#
> -set IP6CDT(InterfaceInfo) 0
> -set IP6CDT(AltInterfaceId) 1
> -set IP6CDT(Policy) 2
> -set IP6CDT(DupAddrDetectTransmits) 3
> -set IP6CDT(ManualAddress) 4
> -set IP6CDT(Gateway) 5
> -set IP6CDT(DnsServer) 6
> -set IP6CDT(Maximum) 7
> -
> -#
> -# EFI_IP6_CONFIG_POLICY
> -#
> -set IP6CP(Manual) 0
> -set IP6CP(Automatic) 1
> -
> -#
> -# Timers
> -#
> -set i 0
> -set L_TimeOut 30
> +#
> +# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
> +# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
> +#
> +# This program and the accompanying materials
> +# are licensed and made available under the terms and conditions of the BSD License
> +# which accompanies this distribution. The full text of the license may be found at
> +# http://opensource.org/licenses/bsd-license.php
> +#
> +# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> +# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
> +#
> +if {[info exist IP6CONFIG_DEFINE] == 1} {
> + return
> +}
> +set IP6CONFIG_DEFINE 1
> +
> +#
> +# EUT/ENTS Connection Definition
> +#
> +#set DEF_EUT_IP_ADDR "2002:0000:0000:0000:0000:0000:0000:0001"
> +#set DEF_EUT_MAC_ADDR [GetTargetMac]
> +#set DEF_EUT_PRT 0
> +
> +#set DEF_ENTS_IP_ADDR "2002:0000:0000:0000:0000:0000:0000:4321"
> +#set DEF_ENTS_MAC_ADDR [GetHostMac]
> +#set DEF_ENTS_PRT 8888
> +
> +#
> +# EFI_IP6_CONFIG_DATA_TYPE
> +#
> +set IP6CDT(InterfaceInfo) 0
> +set IP6CDT(AltInterfaceId) 1
> +set IP6CDT(Policy) 2
> +set IP6CDT(DupAddrDetectTransmits) 3
> +set IP6CDT(ManualAddress) 4
> +set IP6CDT(Gateway) 5
> +set IP6CDT(DnsServer) 6
> +set IP6CDT(Maximum) 7
> +
> +#
> +# EFI_IP6_CONFIG_POLICY
> +#
> +set IP6CP(Manual) 0
> +set IP6CP(Automatic) 1
> +
> +#
> +# Timers
> +#
> +set i 0
> +set L_TimeOut 30
> diff --git a/uefi-sct/EMS/Bin/TestCase/IP6Config/RegisterDataNotify.Conf1.Case1.tcl b/uefi-sct/EMS/Bin/TestCase/IP6Config/RegisterDataNotify.Conf1.Case1.tcl
> index f8a97a1..aa60cb8 100644
> --- a/uefi-sct/EMS/Bin/TestCase/IP6Config/RegisterDataNotify.Conf1.Case1.tcl
> +++ b/uefi-sct/EMS/Bin/TestCase/IP6Config/RegisterDataNotify.Conf1.Case1.tcl
> @@ -1,90 +1,90 @@
> -#
> -# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
> -# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
> -#
> -# This program and the accompanying materials
> -# are licensed and made available under the terms and conditions of the BSD License
> -# which accompanies this distribution. The full text of the license may be found at
> -# http://opensource.org/licenses/bsd-license.php
> -#
> -# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> -# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
> -#
> -################################################################################
> -CaseLevel CONFORMANCE
> -CaseAttribute AUTO
> -CaseVerboseLevel DEFAULT
> -set reportfile report.csv
> -
> -#
> -# test case Name, category, description, GUID...
> -#
> -CaseGuid F76B637C-BA5F-4451-8DF4-A13E1CCAB3A0
> -CaseName RegisterDataNotify.Conf1.Case1
> -CaseCategory IP6Config
> -CaseDescription {RegisterDataNotify must not succeed when event is NULL.}
> -
> -################################################################################
> -Include IP6Config/Include/Ip6Config.inc.tcl
> -
> -
> -#
> -# Begin log ...
> -#
> -BeginLog
> -
> -#
> -# BeginScope
> -#
> -BeginScope _IP6CONFIG_REGISTERDATANOTIFY_CONF1
> -
> -#
> -# Parameter Definition
> -# R_ represents "Remote EFI Side Parameter"
> -# L_ represents "Local ENTS Side Parameter"
> -#
> -UINTN R_Status
> -UINTN R_Context
> -UINTN R_DoneEvent
> -UINTN R_Ip6ConfigDataSize
> -UINT32 R_Ip6ConfigDataType
> -EFI_IP6_CONFIG_INTERFACE_INFO R_Ip6ConfigInterfaceInfo
> -EFI_IP6_CONFIG_INTERFACE_ID R_Ip6ConfigInterfaceId
> -UINT32 R_Ip6ConfigPolicy
> -EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS R_Ip6ConfigDadTransmits
> -
> -#
> -# Check Point: Call Ip6Config->SetData to set manual policy
> -#
> -SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> -SetVar R_Ip6ConfigDataSize [Sizeof UINT32]
> -SetVar R_Ip6ConfigPolicy $IP6CP(Manual)
> -
> -SetVar R_Context 0
> -BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context,\
> - &@R_DoneEvent, &@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "BS.CreateEvent." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -#
> -# Check Point: Call Ip6Config->RegisterDataNotify with event NULL
> -#
> -Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType, 0 ,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_INVALID_PARAMETER]
> -RecordAssertion $assert $Ip6ConfigRegisterDataNotifyConf1AssertionGuid001 \
> - "Ip6Config.RegisterDataNotify - Register notification event with the event NULL." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_INVALID_PARAMETER"
> -
> -#
> -# Clean up
> -#
> -BS->CloseEvent {@R_DoneEvent,&@R_Status}
> -GetAck
> -
> -EndScope _IP6CONFIG_REGISTERDATANOTIFY_CONF1
> -
> +#
> +# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
> +# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
> +#
> +# This program and the accompanying materials
> +# are licensed and made available under the terms and conditions of the BSD License
> +# which accompanies this distribution. The full text of the license may be found at
> +# http://opensource.org/licenses/bsd-license.php
> +#
> +# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> +# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
> +#
> +################################################################################
> +CaseLevel CONFORMANCE
> +CaseAttribute AUTO
> +CaseVerboseLevel DEFAULT
> +set reportfile report.csv
> +
> +#
> +# test case Name, category, description, GUID...
> +#
> +CaseGuid F76B637C-BA5F-4451-8DF4-A13E1CCAB3A0
> +CaseName RegisterDataNotify.Conf1.Case1
> +CaseCategory IP6Config
> +CaseDescription {RegisterDataNotify must not succeed when event is NULL.}
> +
> +################################################################################
> +Include IP6Config/Include/Ip6Config.inc.tcl
> +
> +
> +#
> +# Begin log ...
> +#
> +BeginLog
> +
> +#
> +# BeginScope
> +#
> +BeginScope _IP6CONFIG_REGISTERDATANOTIFY_CONF1
> +
> +#
> +# Parameter Definition
> +# R_ represents "Remote EFI Side Parameter"
> +# L_ represents "Local ENTS Side Parameter"
> +#
> +UINTN R_Status
> +UINTN R_Context
> +UINTN R_DoneEvent
> +UINTN R_Ip6ConfigDataSize
> +UINT32 R_Ip6ConfigDataType
> +EFI_IP6_CONFIG_INTERFACE_INFO R_Ip6ConfigInterfaceInfo
> +EFI_IP6_CONFIG_INTERFACE_ID R_Ip6ConfigInterfaceId
> +UINT32 R_Ip6ConfigPolicy
> +EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS R_Ip6ConfigDadTransmits
> +
> +#
> +# Check Point: Call Ip6Config->SetData to set manual policy
> +#
> +SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> +SetVar R_Ip6ConfigDataSize [Sizeof UINT32]
> +SetVar R_Ip6ConfigPolicy $IP6CP(Manual)
> +
> +SetVar R_Context 0
> +BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context,\
> + &@R_DoneEvent, &@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "BS.CreateEvent." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +#
> +# Check Point: Call Ip6Config->RegisterDataNotify with event NULL
> +#
> +Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType, 0 ,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_INVALID_PARAMETER]
> +RecordAssertion $assert $Ip6ConfigRegisterDataNotifyConf1AssertionGuid001 \
> + "Ip6Config.RegisterDataNotify - Register notification event with the event NULL." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_INVALID_PARAMETER"
> +
> +#
> +# Clean up
> +#
> +BS->CloseEvent {@R_DoneEvent,&@R_Status}
> +GetAck
> +
> +EndScope _IP6CONFIG_REGISTERDATANOTIFY_CONF1
> +
> EndLog
> \ No newline at end of file
> diff --git a/uefi-sct/EMS/Bin/TestCase/IP6Config/RegisterDataNotify.Conf2.Case1.tcl b/uefi-sct/EMS/Bin/TestCase/IP6Config/RegisterDataNotify.Conf2.Case1.tcl
> index 3e72249..38b7431 100644
> --- a/uefi-sct/EMS/Bin/TestCase/IP6Config/RegisterDataNotify.Conf2.Case1.tcl
> +++ b/uefi-sct/EMS/Bin/TestCase/IP6Config/RegisterDataNotify.Conf2.Case1.tcl
> @@ -1,90 +1,90 @@
> -#
> -# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
> -# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
> -#
> -# This program and the accompanying materials
> -# are licensed and made available under the terms and conditions of the BSD License
> -# which accompanies this distribution. The full text of the license may be found at
> -# http://opensource.org/licenses/bsd-license.php
> -#
> -# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> -# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
> -#
> -################################################################################
> -CaseLevel CONFORMANCE
> -CaseAttribute AUTO
> -CaseVerboseLevel DEFAULT
> -set reportfile report.csv
> -
> -#
> -# test case Name, category, description, GUID...
> -#
> -CaseGuid E5221141-97BC-4e5f-9ABA-304BB11EADA0
> -CaseName RegisterDataNotify.Conf2.Case1
> -CaseCategory IP6Config
> -CaseDescription {RegisterDataNotify must not succeed when data type is not supported.}
> -
> -################################################################################
> -Include IP6Config/Include/Ip6Config.inc.tcl
> -
> -
> -#
> -# Begin log ...
> -#
> -BeginLog
> -
> -#
> -# BeginScope
> -#
> -BeginScope _IP6CONFIG_REGISTERDATANOTIFY_CONF2
> -
> -#
> -# Parameter Definition
> -# R_ represents "Remote EFI Side Parameter"
> -# L_ represents "Local ENTS Side Parameter"
> -#
> -UINTN R_Status
> -UINTN R_Context
> -UINTN R_DoneEvent
> -UINTN R_Ip6ConfigDataSize
> -UINT32 R_Ip6ConfigDataType
> -UINTN R_Ip6ConfigDataTypeMaximum
> -EFI_IP6_CONFIG_INTERFACE_INFO R_Ip6ConfigInterfaceInfo
> -EFI_IP6_CONFIG_INTERFACE_ID R_Ip6ConfigInterfaceId
> -UINT32 R_Ip6ConfigPolicy
> -EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS R_Ip6ConfigDadTransmits
> -
> -#
> -# Check Point: Call Ip6Config->SetData to set manual policy
> -#
> -SetVar R_Ip6ConfigDataType $IP6CDT(Maximum)
> -SetVar R_Ip6ConfigDataSize [Sizeof UINTN]
> -
> -SetVar R_Context 0
> -BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context,\
> - &@R_DoneEvent, &@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "BS.CreateEvent." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -#
> -# Check Point: Call Ip6Config->RegisterDataNotify with the datatype not supported
> -#
> -Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType, @R_DoneEvent ,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_UNSUPPORTED]
> -RecordAssertion $assert $Ip6ConfigRegisterDataNotifyConf2AssertionGuid001 \
> - "Ip6Config.RegisterDataNotify - Register notification event with the data type not supported." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_UNSUPPORTED"
> -
> -#
> -# Clean up
> -#
> -BS->CloseEvent {@R_DoneEvent,&@R_Status}
> -GetAck
> -
> -EndScope _IP6CONFIG_REGISTERDATANOTIFY_CONF2
> -
> +#
> +# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
> +# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
> +#
> +# This program and the accompanying materials
> +# are licensed and made available under the terms and conditions of the BSD License
> +# which accompanies this distribution. The full text of the license may be found at
> +# http://opensource.org/licenses/bsd-license.php
> +#
> +# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> +# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
> +#
> +################################################################################
> +CaseLevel CONFORMANCE
> +CaseAttribute AUTO
> +CaseVerboseLevel DEFAULT
> +set reportfile report.csv
> +
> +#
> +# test case Name, category, description, GUID...
> +#
> +CaseGuid E5221141-97BC-4e5f-9ABA-304BB11EADA0
> +CaseName RegisterDataNotify.Conf2.Case1
> +CaseCategory IP6Config
> +CaseDescription {RegisterDataNotify must not succeed when data type is not supported.}
> +
> +################################################################################
> +Include IP6Config/Include/Ip6Config.inc.tcl
> +
> +
> +#
> +# Begin log ...
> +#
> +BeginLog
> +
> +#
> +# BeginScope
> +#
> +BeginScope _IP6CONFIG_REGISTERDATANOTIFY_CONF2
> +
> +#
> +# Parameter Definition
> +# R_ represents "Remote EFI Side Parameter"
> +# L_ represents "Local ENTS Side Parameter"
> +#
> +UINTN R_Status
> +UINTN R_Context
> +UINTN R_DoneEvent
> +UINTN R_Ip6ConfigDataSize
> +UINT32 R_Ip6ConfigDataType
> +UINTN R_Ip6ConfigDataTypeMaximum
> +EFI_IP6_CONFIG_INTERFACE_INFO R_Ip6ConfigInterfaceInfo
> +EFI_IP6_CONFIG_INTERFACE_ID R_Ip6ConfigInterfaceId
> +UINT32 R_Ip6ConfigPolicy
> +EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS R_Ip6ConfigDadTransmits
> +
> +#
> +# Check Point: Call Ip6Config->SetData to set manual policy
> +#
> +SetVar R_Ip6ConfigDataType $IP6CDT(Maximum)
> +SetVar R_Ip6ConfigDataSize [Sizeof UINTN]
> +
> +SetVar R_Context 0
> +BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context,\
> + &@R_DoneEvent, &@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "BS.CreateEvent." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +#
> +# Check Point: Call Ip6Config->RegisterDataNotify with the datatype not supported
> +#
> +Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType, @R_DoneEvent ,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_UNSUPPORTED]
> +RecordAssertion $assert $Ip6ConfigRegisterDataNotifyConf2AssertionGuid001 \
> + "Ip6Config.RegisterDataNotify - Register notification event with the data type not supported." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_UNSUPPORTED"
> +
> +#
> +# Clean up
> +#
> +BS->CloseEvent {@R_DoneEvent,&@R_Status}
> +GetAck
> +
> +EndScope _IP6CONFIG_REGISTERDATANOTIFY_CONF2
> +
> EndLog
> \ No newline at end of file
> diff --git a/uefi-sct/EMS/Bin/TestCase/IP6Config/RegisterDataNotify.Conf3.Case1.tcl b/uefi-sct/EMS/Bin/TestCase/IP6Config/RegisterDataNotify.Conf3.Case1.tcl
> index 8c8363c..77d9ef5 100644
> --- a/uefi-sct/EMS/Bin/TestCase/IP6Config/RegisterDataNotify.Conf3.Case1.tcl
> +++ b/uefi-sct/EMS/Bin/TestCase/IP6Config/RegisterDataNotify.Conf3.Case1.tcl
> @@ -1,109 +1,109 @@
> -#
> -# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
> -# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
> -#
> -# This program and the accompanying materials
> -# are licensed and made available under the terms and conditions of the BSD License
> -# which accompanies this distribution. The full text of the license may be found at
> -# http://opensource.org/licenses/bsd-license.php
> -#
> -# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> -# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
> -#
> -################################################################################
> -CaseLevel CONFORMANCE
> -CaseAttribute AUTO
> -CaseVerboseLevel DEFAULT
> -set reportfile report.csv
> -
> -#
> -# test case Name, category, description, GUID...
> -#
> -CaseGuid B00EBD2E-F23E-434e-80E8-2A17C3BCFDFE
> -CaseName RegisterDataNotify.Conf3.Case1
> -CaseCategory IP6Config
> -CaseDescription {RegisterDataNotify must not succeed when event has already registered.}
> -
> -################################################################################
> -Include IP6Config/Include/Ip6Config.inc.tcl
> -
> -
> -#
> -# Begin log ...
> -#
> -BeginLog
> -
> -#
> -# BeginScope
> -#
> -BeginScope _IP6CONFIG_REGISTERDATANOTIFY_CONF3
> -
> -#
> -# Parameter Definition
> -# R_ represents "Remote EFI Side Parameter"
> -# L_ represents "Local ENTS Side Parameter"
> -#
> -UINTN R_Status
> -UINTN R_Context
> -UINTN R_DoneEvent
> -UINTN R_Ip6ConfigDataSize
> -UINT32 R_Ip6ConfigDataType
> -EFI_IP6_CONFIG_INTERFACE_INFO R_Ip6ConfigInterfaceInfo
> -EFI_IP6_CONFIG_INTERFACE_ID R_Ip6ConfigInterfaceId
> -UINT32 R_Ip6ConfigPolicy
> -EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS R_Ip6ConfigDadTransmits
> -
> -#
> -# Check Point: Call Ip6Config->SetData to set manual policy
> -#
> -SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> -SetVar R_Ip6ConfigDataSize [Sizeof UINT32]
> -SetVar R_Ip6ConfigPolicy $IP6CP(Manual)
> -
> -SetVar R_Context 0
> -BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context,\
> - &@R_DoneEvent, &@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "BS.CreateEvent." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -#
> -# Check Point: Call Ip6Config->RegisterDataNotify with valid parameters
> -#
> -Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType, @R_DoneEvent ,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.RegisterDataNotify - Register notification event with valid parameters." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -#
> -# Check Point : Call RegisterDataNotify() with the same event (has been registered)
> -#
> -Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType, @R_DoneEvent ,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_ACCESS_DENIED]
> -RecordAssertion $assert $Ip6ConfigRegisterDataNotifyConf3AssertionGuid001 \
> - "Ip6Config.RegisterDataNotify - Register notification event with the event registered already." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_ACCESS_DENIED"
> -
> -
> -#
> -# Clean up
> -#
> -SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> -Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.UnregisterDataNotify - Unregister notification event for configuration." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -BS->CloseEvent {@R_DoneEvent,&@R_Status}
> -GetAck
> -
> -EndScope _IP6CONFIG_REGISTERDATANOTIFY_CONF3
> -
> +#
> +# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
> +# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
> +#
> +# This program and the accompanying materials
> +# are licensed and made available under the terms and conditions of the BSD License
> +# which accompanies this distribution. The full text of the license may be found at
> +# http://opensource.org/licenses/bsd-license.php
> +#
> +# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> +# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
> +#
> +################################################################################
> +CaseLevel CONFORMANCE
> +CaseAttribute AUTO
> +CaseVerboseLevel DEFAULT
> +set reportfile report.csv
> +
> +#
> +# test case Name, category, description, GUID...
> +#
> +CaseGuid B00EBD2E-F23E-434e-80E8-2A17C3BCFDFE
> +CaseName RegisterDataNotify.Conf3.Case1
> +CaseCategory IP6Config
> +CaseDescription {RegisterDataNotify must not succeed when event has already registered.}
> +
> +################################################################################
> +Include IP6Config/Include/Ip6Config.inc.tcl
> +
> +
> +#
> +# Begin log ...
> +#
> +BeginLog
> +
> +#
> +# BeginScope
> +#
> +BeginScope _IP6CONFIG_REGISTERDATANOTIFY_CONF3
> +
> +#
> +# Parameter Definition
> +# R_ represents "Remote EFI Side Parameter"
> +# L_ represents "Local ENTS Side Parameter"
> +#
> +UINTN R_Status
> +UINTN R_Context
> +UINTN R_DoneEvent
> +UINTN R_Ip6ConfigDataSize
> +UINT32 R_Ip6ConfigDataType
> +EFI_IP6_CONFIG_INTERFACE_INFO R_Ip6ConfigInterfaceInfo
> +EFI_IP6_CONFIG_INTERFACE_ID R_Ip6ConfigInterfaceId
> +UINT32 R_Ip6ConfigPolicy
> +EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS R_Ip6ConfigDadTransmits
> +
> +#
> +# Check Point: Call Ip6Config->SetData to set manual policy
> +#
> +SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> +SetVar R_Ip6ConfigDataSize [Sizeof UINT32]
> +SetVar R_Ip6ConfigPolicy $IP6CP(Manual)
> +
> +SetVar R_Context 0
> +BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context,\
> + &@R_DoneEvent, &@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "BS.CreateEvent." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +#
> +# Check Point: Call Ip6Config->RegisterDataNotify with valid parameters
> +#
> +Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType, @R_DoneEvent ,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.RegisterDataNotify - Register notification event with valid parameters." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +#
> +# Check Point : Call RegisterDataNotify() with the same event (has been registered)
> +#
> +Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType, @R_DoneEvent ,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_ACCESS_DENIED]
> +RecordAssertion $assert $Ip6ConfigRegisterDataNotifyConf3AssertionGuid001 \
> + "Ip6Config.RegisterDataNotify - Register notification event with the event registered already." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_ACCESS_DENIED"
> +
> +
> +#
> +# Clean up
> +#
> +SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> +Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.UnregisterDataNotify - Unregister notification event for configuration." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +BS->CloseEvent {@R_DoneEvent,&@R_Status}
> +GetAck
> +
> +EndScope _IP6CONFIG_REGISTERDATANOTIFY_CONF3
> +
> EndLog
> \ No newline at end of file
> diff --git a/uefi-sct/EMS/Bin/TestCase/IP6Config/RegisterDataNotify.Func1.Case1.tcl b/uefi-sct/EMS/Bin/TestCase/IP6Config/RegisterDataNotify.Func1.Case1.tcl
> index 38be04c..b2b777c 100644
> --- a/uefi-sct/EMS/Bin/TestCase/IP6Config/RegisterDataNotify.Func1.Case1.tcl
> +++ b/uefi-sct/EMS/Bin/TestCase/IP6Config/RegisterDataNotify.Func1.Case1.tcl
> @@ -1,539 +1,539 @@
> -#
> -# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
> -# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
> -#
> -# This program and the accompanying materials
> -# are licensed and made available under the terms and conditions of the BSD License
> -# which accompanies this distribution. The full text of the license may be found at
> -# http://opensource.org/licenses/bsd-license.php
> -#
> -# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> -# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
> -#
> -################################################################################
> -CaseLevel FUNCTION
> -CaseAttribute AUTO
> -CaseVerboseLevel DEFAULT
> -set reportfile report.csv
> -
> -#
> -# test case Name, category, description, GUID...
> -#
> -CaseGuid 7D041B9B-4F68-434a-A0C6-63FDC415D078
> -CaseName RegisterDataNotify.Func1.Case1
> -CaseCategory IP6Config
> -CaseDescription {RegisterDataNotify must succeed with valid parameters when one event registered on one data type.}
> -
> -################################################################################
> -Include IP6Config/Include/Ip6Config.inc.tcl
> -
> -
> -#
> -# Begin log ...
> -#
> -BeginLog
> -
> -#
> -# BeginScope
> -#
> -BeginScope _IP6CONFIG_REGISTERDATANOTIFY_FUNC1_CASE1
> -
> -#
> -# Parameter Definition
> -# R_ represents "Remote EFI Side Parameter"
> -# L_ represents "Local ENTS Side Parameter"
> -#
> -UINTN R_Status
> -UINTN R_Context
> -UINTN R_DoneEvent
> -UINTN R_Context1
> -UINTN R_DoneEvent1
> -UINTN R_Context2
> -UINTN R_DoneEvent2
> -UINTN R_Ip6ConfigDataSize
> -UINT32 R_Ip6ConfigDataType
> -EFI_IP6_CONFIG_INTERFACE_INFO R_Ip6ConfigInterfaceInfo
> -EFI_IP6_CONFIG_INTERFACE_ID R_Ip6ConfigInterfaceId
> -UINT32 R_Ip6ConfigPolicy
> -EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS R_Ip6ConfigDadTransmits
> -
> -#
> -# Check Point: Call Ip6Config->SetData to set manual policy
> -#
> -SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> -SetVar R_Ip6ConfigDataSize [Sizeof UINT32]
> -SetVar R_Ip6ConfigPolicy $IP6CP(Manual)
> -
> -SetVar R_Context 0
> -BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context,\
> - &@R_DoneEvent, &@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "BS.CreateEvent." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.RegisterDataNotify - Register notification event for configuration." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_Status"
> -GetAck
> -GetVar R_Status
> -if { $R_Status == $EFI_SUCCESS } {
> - set assert pass
> - RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.SetData - Call SetData to set manual policy." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -} elseif { $R_Status == $EFI_NOT_READY } {
> - set i 0
> - set L_TimeOut 30
> - while { 1 > 0 } {
> - GetVar R_Context
> - if { $R_Context == 1 } {
> - break
> - } elseif { $i == $L_TimeOut } {
> - set assert fail
> - RecordAssertion $assert $GenericAssertionGuid \
> - "SetData failed.(event hasn't been signaled before TIMEOUT)." \
> - "TIMEOUT value is $L_TimeOut (sec), "
> - SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - EndScope _IP6CONFIG_REGISTERDATANOTIFY_FUNC1_CASE1
> - EndLog
> - return
> - }
> - incr i
> - Stall 1
> - }
> -} else {
> - set assert fail
> - RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.SetData - Call SetData to set manual policy." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> - SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - EndScope _IP6CONFIG_REGISTERDATANOTIFY_FUNC1_CASE1
> - EndLog
> - return
> -}
> -
> -Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.GetData - Call GetData to get policy value." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -GetVar R_Ip6ConfigPolicy
> -if { $R_Ip6ConfigPolicy == $IP6CP(Manual) } {
> - set assert pass
> -} else {
> - set assert fail
> -
> - RecordAssertion $assert $GenericAssertionGuid \
> - "Set manual policy succeeds(event is signaled correctly and data correct)."
> - SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - EndScope _IP6CONFIG_REGISTERDATANOTIFY_FUNC1_CASE1
> - EndLog
> - return
> -}
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Set manual policy succeeds(event is signaled correctly and data correct)."
> -
> -#
> -# Check Point: Call Ip6Config->SetData to set DadXmits 0
> -#
> -SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> -SetVar R_Ip6ConfigDataSize [Sizeof EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS]
> -SetVar R_Ip6ConfigDadTransmits.DupAddrDetectTransmits 0
> -
> -SetVar R_Context1 0
> -BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context1,\
> - &@R_DoneEvent1, &@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "BS.CreateEvent." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.RegisterDataNotify - Register notification event for configuration." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigDadTransmits,&@R_Status"
> -GetAck
> -GetVar R_Status
> -if { $R_Status == $EFI_SUCCESS } {
> - set assert pass
> - RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.SetData - Call SetData to set DadXmits 0." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -} elseif { $R_Status == $EFI_NOT_READY } {
> - set i 0
> - set L_TimeOut 30
> - while { 1 > 0 } {
> - GetVar R_Context1
> - if { $R_Context1 == 1 } {
> - break
> - } elseif { $i == $L_TimeOut } {
> - set assert fail
> - RecordAssertion $assert $GenericAssertionGuid \
> - "SetData failed.(event hasn't been signaled before TIMEOUT)." \
> - "TIMEOUT value is $L_TimeOut (sec), "
> - SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> - GetAck
> - EndScope _IP6CONFIG_REGISTERDATANOTIFY_FUNC1_CASE1
> - EndLog
> - return
> - }
> - incr i
> - Stall 1
> - }
> -} else {
> - set assert fail
> - RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.SetData - Call SetData to set DadXmits 0." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> - SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> - GetAck
> - EndScope _IP6CONFIG_REGISTERDATANOTIFY_FUNC1_CASE1
> - EndLog
> - return
> -}
> -
> -Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigDadTransmits,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.GetData - Call GetData to get DadXmits value." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -GetVar R_Ip6ConfigDadTransmits.DupAddrDetectTransmits
> -if { ${R_Ip6ConfigDadTransmits.DupAddrDetectTransmits} == 0 } {
> - set assert pass
> -} else {
> - set assert fail
> -
> - RecordAssertion $assert $GenericAssertionGuid \
> - "Set DadXmits succeeds(event is signaled correctly and data correct)."
> - SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> - GetAck
> - EndScope _IP6CONFIG_REGISTERDATANOTIFY_FUNC1_CASE1
> - EndLog
> - return
> -}
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Set DadXmits succeeds(event is signaled correctly and data correct)."
> -
> -#
> -# Check Point : Set Manual Address with valid parameter
> -#
> -EFI_IP6_CONFIG_MANUAL_ADDRESS R_Temp_Ip6ConfigManualAddress
> -
> -set L_ManualListLen 1
> -EFI_IP6_CONFIG_MANUAL_ADDRESS R_Ip6ConfigManualAddress
> -set L_UnitLen [Sizeof EFI_IP6_CONFIG_MANUAL_ADDRESS]
> -set L_ListLen [expr {$L_UnitLen * $L_ManualListLen}]
> -SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
> -SetVar R_Ip6ConfigDataSize $L_ListLen
> -SetVar R_Temp_Ip6ConfigManualAddress.IsAnycast FALSE
> -SetVar R_Temp_Ip6ConfigManualAddress.PrefixLength 64
> -SetIpv6Address R_Temp_Ip6ConfigManualAddress.Address "2002::5000"
> -SetVar R_Ip6ConfigManualAddress @R_Temp_Ip6ConfigManualAddress
> -#
> -# Register Event for Manual Address
> -#
> -SetVar R_Context2 0
> -BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context2,\
> - &@R_DoneEvent2, &@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "BS.CreateEvent." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent2,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $Ip6ConfigRegisterDataNotifyFunc1AssertionGuid001 \
> - "Ip6Config.RegisterDataNotify - Register notification event for configuration." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigManualAddress,&@R_Status"
> -GetAck
> -GetVar R_Status
> -if { $R_Status == $EFI_SUCCESS } {
> - set assert pass
> - RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.SetData - Call SetData to set manual address." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -} elseif { $R_Status == $EFI_NOT_READY } {
> - set i 0
> - set L_TimeOut 30
> - while { 1 > 0 } {
> - GetVar R_Context2
> - if { $R_Context2 == 1 } {
> - break
> - } elseif { $i == $L_TimeOut } {
> - set assert fail
> - RecordAssertion $assert $GenericAssertionGuid \
> - "SetData failed.(event hasn't been signaled before TIMEOUT)." \
> - "TIMEOUT value is $L_TimeOut (sec), "
> - SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> - GetAck
> - SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent2,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent2,&@R_Status}
> - GetAck
> - EndScope _IP6CONFIG_REGISTERDATANOTIFY_FUNC1_CASE1
> - EndLog
> - return
> - }
> - incr i
> - Stall 1
> - }
> -} else {
> - set assert fail
> - RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.SetData - Call SetData to set manual address." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> - SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> - GetAck
> - SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent2,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent2,&@R_Status}
> - GetAck
> - EndScope _IP6CONFIG_REGISTERDATANOTIFY_FUNC1_CASE1
> - EndLog
> - return
> -}
> -
> -#
> -# Check Events for registered datatype
> -#
> -GetVar R_Context2
> -if { $R_Context2 == 1 } {
> - set assert pass
> -} else {
> - set assert fail
> -}
> -RecordAssertion $assert $Ip6ConfigRegisterDataNotifyFunc1AssertionGuid002 \
> - "Ip6Config.RegisterDataNotify - Registered event is signaled."
> -
> -#
> -# GetData to verfiy the data setting
> -#
> -Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigManualAddress,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.GetData - Call GetData to get manual address." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -GetVar R_Ip6ConfigManualAddress.IsAnycast
> -if { ${R_Ip6ConfigManualAddress.IsAnycast} == FALSE } {
> - set assert pass
> -} else {
> - set assert fail
> -}
> -GetVar R_Ip6ConfigManualAddress.PrefixLength
> -if { ${R_Ip6ConfigManualAddress.PrefixLength} == 64 } {
> - set assert pass
> -} else {
> - set assert fail
> -}
> -GetVar R_Ip6ConfigManualAddress.Address
> -set L_ManualAddress "2002:0000:0000:0000:0000:0000:0000:5000"
> -set L_RemoteAddress [ GetIpv6Address {R_Ip6ConfigManualAddress.Address} ]
> -if { [ string compare $L_RemoteAddress $L_ManualAddress ] == 0 } {
> - set assert pass
> -} else {
> - set assert fail
> -}
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Set ManualAddress succeeds(event is signaled correctly and data correct)."
> -
> -#
> -# Set automatic policy (this will clean up all address information configured)
> -#
> -SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> -SetVar R_Ip6ConfigDataSize [Sizeof UINT32]
> -SetVar R_Ip6ConfigPolicy $IP6CP(Automatic)
> -
> -SetVar R_Context 0
> -
> -Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_Status"
> -GetAck
> -GetVar R_Status
> -if { $R_Status == $EFI_SUCCESS } {
> - set assert pass
> -} elseif { $R_Status == $EFI_NOT_READY } {
> - set i 0
> - set L_TimeOut 30
> - set assert pass
> - while { 1 > 0 } {
> - GetVar R_Context
> - if { $R_Context == 1 } {
> - break
> - } elseif { $i == $L_TimeOut } {
> - set assert fail
> -
> - SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> - GetAck
> - SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent2,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent2,&@R_Status}
> - GetAck
> -
> - EndScope _IP6CONFIG_REGISTERDATANOTIFY_FUNC1_CASE1
> - EndLog
> - return
> - }
> - incr i
> - Stall 1
> - }
> -} else {
> - set assert fail
> -
> - SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> - GetAck
> - SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent2,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent2,&@R_Status}
> - GetAck
> -
> - EndScope _IP6CONFIG_REGISTERDATANOTIFY_FUNC1_CASE1
> - EndLog
> - return
> -}
> -
> -Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_Status"
> -GetAck
> -GetVar R_Ip6ConfigPolicy
> -if { $R_Ip6ConfigPolicy == $IP6CP(Automatic) } {
> - set assert pass
> -} else {
> - set assert fail
> -}
> -
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.SetData - Set automatic policy to clean up the former configuration." \
> - "TimeUsed - $i, TimeOut Value- $L_TimeOut"
> -
> -#
> -# Clean up
> -#
> -SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> -Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.UnregisterDataNotify - Unregister notification event for configuration." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -BS->CloseEvent {@R_DoneEvent,&@R_Status}
> -GetAck
> -
> -SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> -Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.UnregisterDataNotify - Unregister notification event for configuration." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> -GetAck
> -
> -SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
> -Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent2,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.UnregisterDataNotify - Unregister notification event for configuration." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -BS->CloseEvent {@R_DoneEvent2,&@R_Status}
> -GetAck
> -
> -EndScope _IP6CONFIG_REGISTERDATANOTIFY_FUNC1_CASE1
> -
> +#
> +# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
> +# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
> +#
> +# This program and the accompanying materials
> +# are licensed and made available under the terms and conditions of the BSD License
> +# which accompanies this distribution. The full text of the license may be found at
> +# http://opensource.org/licenses/bsd-license.php
> +#
> +# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> +# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
> +#
> +################################################################################
> +CaseLevel FUNCTION
> +CaseAttribute AUTO
> +CaseVerboseLevel DEFAULT
> +set reportfile report.csv
> +
> +#
> +# test case Name, category, description, GUID...
> +#
> +CaseGuid 7D041B9B-4F68-434a-A0C6-63FDC415D078
> +CaseName RegisterDataNotify.Func1.Case1
> +CaseCategory IP6Config
> +CaseDescription {RegisterDataNotify must succeed with valid parameters when one event registered on one data type.}
> +
> +################################################################################
> +Include IP6Config/Include/Ip6Config.inc.tcl
> +
> +
> +#
> +# Begin log ...
> +#
> +BeginLog
> +
> +#
> +# BeginScope
> +#
> +BeginScope _IP6CONFIG_REGISTERDATANOTIFY_FUNC1_CASE1
> +
> +#
> +# Parameter Definition
> +# R_ represents "Remote EFI Side Parameter"
> +# L_ represents "Local ENTS Side Parameter"
> +#
> +UINTN R_Status
> +UINTN R_Context
> +UINTN R_DoneEvent
> +UINTN R_Context1
> +UINTN R_DoneEvent1
> +UINTN R_Context2
> +UINTN R_DoneEvent2
> +UINTN R_Ip6ConfigDataSize
> +UINT32 R_Ip6ConfigDataType
> +EFI_IP6_CONFIG_INTERFACE_INFO R_Ip6ConfigInterfaceInfo
> +EFI_IP6_CONFIG_INTERFACE_ID R_Ip6ConfigInterfaceId
> +UINT32 R_Ip6ConfigPolicy
> +EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS R_Ip6ConfigDadTransmits
> +
> +#
> +# Check Point: Call Ip6Config->SetData to set manual policy
> +#
> +SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> +SetVar R_Ip6ConfigDataSize [Sizeof UINT32]
> +SetVar R_Ip6ConfigPolicy $IP6CP(Manual)
> +
> +SetVar R_Context 0
> +BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context,\
> + &@R_DoneEvent, &@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "BS.CreateEvent." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.RegisterDataNotify - Register notification event for configuration." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_Status"
> +GetAck
> +GetVar R_Status
> +if { $R_Status == $EFI_SUCCESS } {
> + set assert pass
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.SetData - Call SetData to set manual policy." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +} elseif { $R_Status == $EFI_NOT_READY } {
> + set i 0
> + set L_TimeOut 30
> + while { 1 > 0 } {
> + GetVar R_Context
> + if { $R_Context == 1 } {
> + break
> + } elseif { $i == $L_TimeOut } {
> + set assert fail
> + RecordAssertion $assert $GenericAssertionGuid \
> + "SetData failed.(event hasn't been signaled before TIMEOUT)." \
> + "TIMEOUT value is $L_TimeOut (sec), "
> + SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_REGISTERDATANOTIFY_FUNC1_CASE1
> + EndLog
> + return
> + }
> + incr i
> + Stall 1
> + }
> +} else {
> + set assert fail
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.SetData - Call SetData to set manual policy." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> + SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_REGISTERDATANOTIFY_FUNC1_CASE1
> + EndLog
> + return
> +}
> +
> +Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.GetData - Call GetData to get policy value." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +GetVar R_Ip6ConfigPolicy
> +if { $R_Ip6ConfigPolicy == $IP6CP(Manual) } {
> + set assert pass
> +} else {
> + set assert fail
> +
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Set manual policy succeeds(event is signaled correctly and data correct)."
> + SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_REGISTERDATANOTIFY_FUNC1_CASE1
> + EndLog
> + return
> +}
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Set manual policy succeeds(event is signaled correctly and data correct)."
> +
> +#
> +# Check Point: Call Ip6Config->SetData to set DadXmits 0
> +#
> +SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> +SetVar R_Ip6ConfigDataSize [Sizeof EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS]
> +SetVar R_Ip6ConfigDadTransmits.DupAddrDetectTransmits 0
> +
> +SetVar R_Context1 0
> +BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context1,\
> + &@R_DoneEvent1, &@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "BS.CreateEvent." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.RegisterDataNotify - Register notification event for configuration." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigDadTransmits,&@R_Status"
> +GetAck
> +GetVar R_Status
> +if { $R_Status == $EFI_SUCCESS } {
> + set assert pass
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.SetData - Call SetData to set DadXmits 0." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +} elseif { $R_Status == $EFI_NOT_READY } {
> + set i 0
> + set L_TimeOut 30
> + while { 1 > 0 } {
> + GetVar R_Context1
> + if { $R_Context1 == 1 } {
> + break
> + } elseif { $i == $L_TimeOut } {
> + set assert fail
> + RecordAssertion $assert $GenericAssertionGuid \
> + "SetData failed.(event hasn't been signaled before TIMEOUT)." \
> + "TIMEOUT value is $L_TimeOut (sec), "
> + SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_REGISTERDATANOTIFY_FUNC1_CASE1
> + EndLog
> + return
> + }
> + incr i
> + Stall 1
> + }
> +} else {
> + set assert fail
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.SetData - Call SetData to set DadXmits 0." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> + SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_REGISTERDATANOTIFY_FUNC1_CASE1
> + EndLog
> + return
> +}
> +
> +Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigDadTransmits,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.GetData - Call GetData to get DadXmits value." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +GetVar R_Ip6ConfigDadTransmits.DupAddrDetectTransmits
> +if { ${R_Ip6ConfigDadTransmits.DupAddrDetectTransmits} == 0 } {
> + set assert pass
> +} else {
> + set assert fail
> +
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Set DadXmits succeeds(event is signaled correctly and data correct)."
> + SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_REGISTERDATANOTIFY_FUNC1_CASE1
> + EndLog
> + return
> +}
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Set DadXmits succeeds(event is signaled correctly and data correct)."
> +
> +#
> +# Check Point : Set Manual Address with valid parameter
> +#
> +EFI_IP6_CONFIG_MANUAL_ADDRESS R_Temp_Ip6ConfigManualAddress
> +
> +set L_ManualListLen 1
> +EFI_IP6_CONFIG_MANUAL_ADDRESS R_Ip6ConfigManualAddress
> +set L_UnitLen [Sizeof EFI_IP6_CONFIG_MANUAL_ADDRESS]
> +set L_ListLen [expr {$L_UnitLen * $L_ManualListLen}]
> +SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
> +SetVar R_Ip6ConfigDataSize $L_ListLen
> +SetVar R_Temp_Ip6ConfigManualAddress.IsAnycast FALSE
> +SetVar R_Temp_Ip6ConfigManualAddress.PrefixLength 64
> +SetIpv6Address R_Temp_Ip6ConfigManualAddress.Address "2002::5000"
> +SetVar R_Ip6ConfigManualAddress @R_Temp_Ip6ConfigManualAddress
> +#
> +# Register Event for Manual Address
> +#
> +SetVar R_Context2 0
> +BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context2,\
> + &@R_DoneEvent2, &@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "BS.CreateEvent." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent2,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $Ip6ConfigRegisterDataNotifyFunc1AssertionGuid001 \
> + "Ip6Config.RegisterDataNotify - Register notification event for configuration." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigManualAddress,&@R_Status"
> +GetAck
> +GetVar R_Status
> +if { $R_Status == $EFI_SUCCESS } {
> + set assert pass
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.SetData - Call SetData to set manual address." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +} elseif { $R_Status == $EFI_NOT_READY } {
> + set i 0
> + set L_TimeOut 30
> + while { 1 > 0 } {
> + GetVar R_Context2
> + if { $R_Context2 == 1 } {
> + break
> + } elseif { $i == $L_TimeOut } {
> + set assert fail
> + RecordAssertion $assert $GenericAssertionGuid \
> + "SetData failed.(event hasn't been signaled before TIMEOUT)." \
> + "TIMEOUT value is $L_TimeOut (sec), "
> + SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> + GetAck
> + SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent2,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent2,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_REGISTERDATANOTIFY_FUNC1_CASE1
> + EndLog
> + return
> + }
> + incr i
> + Stall 1
> + }
> +} else {
> + set assert fail
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.SetData - Call SetData to set manual address." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> + SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> + GetAck
> + SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent2,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent2,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_REGISTERDATANOTIFY_FUNC1_CASE1
> + EndLog
> + return
> +}
> +
> +#
> +# Check Events for registered datatype
> +#
> +GetVar R_Context2
> +if { $R_Context2 == 1 } {
> + set assert pass
> +} else {
> + set assert fail
> +}
> +RecordAssertion $assert $Ip6ConfigRegisterDataNotifyFunc1AssertionGuid002 \
> + "Ip6Config.RegisterDataNotify - Registered event is signaled."
> +
> +#
> +# GetData to verfiy the data setting
> +#
> +Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigManualAddress,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.GetData - Call GetData to get manual address." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +GetVar R_Ip6ConfigManualAddress.IsAnycast
> +if { ${R_Ip6ConfigManualAddress.IsAnycast} == FALSE } {
> + set assert pass
> +} else {
> + set assert fail
> +}
> +GetVar R_Ip6ConfigManualAddress.PrefixLength
> +if { ${R_Ip6ConfigManualAddress.PrefixLength} == 64 } {
> + set assert pass
> +} else {
> + set assert fail
> +}
> +GetVar R_Ip6ConfigManualAddress.Address
> +set L_ManualAddress "2002:0000:0000:0000:0000:0000:0000:5000"
> +set L_RemoteAddress [ GetIpv6Address {R_Ip6ConfigManualAddress.Address} ]
> +if { [ string compare $L_RemoteAddress $L_ManualAddress ] == 0 } {
> + set assert pass
> +} else {
> + set assert fail
> +}
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Set ManualAddress succeeds(event is signaled correctly and data correct)."
> +
> +#
> +# Set automatic policy (this will clean up all address information configured)
> +#
> +SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> +SetVar R_Ip6ConfigDataSize [Sizeof UINT32]
> +SetVar R_Ip6ConfigPolicy $IP6CP(Automatic)
> +
> +SetVar R_Context 0
> +
> +Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_Status"
> +GetAck
> +GetVar R_Status
> +if { $R_Status == $EFI_SUCCESS } {
> + set assert pass
> +} elseif { $R_Status == $EFI_NOT_READY } {
> + set i 0
> + set L_TimeOut 30
> + set assert pass
> + while { 1 > 0 } {
> + GetVar R_Context
> + if { $R_Context == 1 } {
> + break
> + } elseif { $i == $L_TimeOut } {
> + set assert fail
> +
> + SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> + GetAck
> + SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent2,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent2,&@R_Status}
> + GetAck
> +
> + EndScope _IP6CONFIG_REGISTERDATANOTIFY_FUNC1_CASE1
> + EndLog
> + return
> + }
> + incr i
> + Stall 1
> + }
> +} else {
> + set assert fail
> +
> + SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> + GetAck
> + SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent2,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent2,&@R_Status}
> + GetAck
> +
> + EndScope _IP6CONFIG_REGISTERDATANOTIFY_FUNC1_CASE1
> + EndLog
> + return
> +}
> +
> +Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_Status"
> +GetAck
> +GetVar R_Ip6ConfigPolicy
> +if { $R_Ip6ConfigPolicy == $IP6CP(Automatic) } {
> + set assert pass
> +} else {
> + set assert fail
> +}
> +
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.SetData - Set automatic policy to clean up the former configuration." \
> + "TimeUsed - $i, TimeOut Value- $L_TimeOut"
> +
> +#
> +# Clean up
> +#
> +SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> +Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.UnregisterDataNotify - Unregister notification event for configuration." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +BS->CloseEvent {@R_DoneEvent,&@R_Status}
> +GetAck
> +
> +SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> +Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.UnregisterDataNotify - Unregister notification event for configuration." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> +GetAck
> +
> +SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
> +Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent2,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.UnregisterDataNotify - Unregister notification event for configuration." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +BS->CloseEvent {@R_DoneEvent2,&@R_Status}
> +GetAck
> +
> +EndScope _IP6CONFIG_REGISTERDATANOTIFY_FUNC1_CASE1
> +
> EndLog
> \ No newline at end of file
> diff --git a/uefi-sct/EMS/Bin/TestCase/IP6Config/RegisterDataNotify.Func1.Case2.tcl b/uefi-sct/EMS/Bin/TestCase/IP6Config/RegisterDataNotify.Func1.Case2.tcl
> index bd52067..6f7e51f 100644
> --- a/uefi-sct/EMS/Bin/TestCase/IP6Config/RegisterDataNotify.Func1.Case2.tcl
> +++ b/uefi-sct/EMS/Bin/TestCase/IP6Config/RegisterDataNotify.Func1.Case2.tcl
> @@ -1,266 +1,266 @@
> -#
> -# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
> -# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
> -#
> -# This program and the accompanying materials
> -# are licensed and made available under the terms and conditions of the BSD License
> -# which accompanies this distribution. The full text of the license may be found at
> -# http://opensource.org/licenses/bsd-license.php
> -#
> -# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> -# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
> -#
> -################################################################################
> -CaseLevel FUNCTION
> -CaseAttribute AUTO
> -CaseVerboseLevel DEFAULT
> -set reportfile report.csv
> -
> -#
> -# test case Name, category, description, GUID...
> -#
> -CaseGuid 886AE98A-5D43-47b4-A339-85FB089F21FA
> -CaseName RegisterDataNotify.Func1.Case2
> -CaseCategory IP6Config
> -CaseDescription {RegisterDataNotify must succeed with valid parameters when one event registered on two data types.}
> -
> -################################################################################
> -Include IP6Config/Include/Ip6Config.inc.tcl
> -
> -
> -#
> -# Begin log ...
> -#
> -BeginLog
> -
> -#
> -# BeginScope
> -#
> -BeginScope _IP6CONFIG_REGISTERDATANOTIFY_FUNC1_CASE2
> -
> -#
> -# Parameter Definition
> -# R_ represents "Remote EFI Side Parameter"
> -# L_ represents "Local ENTS Side Parameter"
> -#
> -UINTN R_Status
> -UINTN R_Context
> -UINTN R_DoneEvent
> -UINTN R_Ip6ConfigDataSize
> -UINT32 R_Ip6ConfigDataType
> -EFI_IP6_CONFIG_INTERFACE_INFO R_Ip6ConfigInterfaceInfo
> -EFI_IP6_CONFIG_INTERFACE_ID R_Ip6ConfigInterfaceId
> -UINT32 R_Ip6ConfigPolicy
> -EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS R_Ip6ConfigDadTransmits
> -
> -#
> -# Check Point: Create Event and register it with data type [Policy] and [DadXmits]
> -#
> -SetVar R_Context 0
> -BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context,\
> - &@R_DoneEvent, &@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "BS.CreateEvent." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> -SetVar R_Ip6ConfigDataSize [Sizeof UINT32]
> -SetVar R_Ip6ConfigPolicy $IP6CP(Manual)
> -
> -Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $Ip6ConfigRegisterDataNotifyFunc1AssertionGuid003 \
> - "Ip6Config.RegisterDataNotify - Register notification event for configuration." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> -SetVar R_Ip6ConfigDataSize [Sizeof EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS]
> -SetVar R_Ip6ConfigDadTransmits.DupAddrDetectTransmits 3
> -
> -Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $Ip6ConfigRegisterDataNotifyFunc1AssertionGuid004 \
> - "Ip6Config.RegisterDataNotify - Register notification event for configuration." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -#
> -# Check Point: Call Ip6Cofnig->SetData to set [Policy] and check whether the event is signaled.
> -#
> -SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> -SetVar R_Ip6ConfigDataSize [Sizeof UINT32]
> -SetVar R_Ip6ConfigPolicy $IP6CP(Manual)
> -
> -GetVar R_Context
> -set L_Context1 $R_Context
> -set L_Context2 [expr { $L_Context1 + 1 }]
> -
> -Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_Status"
> -GetAck
> -GetVar R_Status
> -
> -if { $R_Status == $EFI_SUCCESS } {
> - set assert pass
> - RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.SetData - Call SetData to set manual policy." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -} elseif { $R_Status == $EFI_NOT_READY } {
> - set i 0
> - set L_TimeOut 30
> - while { 1 > 0 } {
> - GetVar R_Context
> - if { $R_Context == $L_Context2 } {
> - break
> - } elseif { $i == $L_TimeOut } {
> - set assert fail
> - RecordAssertion $assert $GenericAssertionGuid \
> - "SetData failed.(event hasn't been signaled before TIMEOUT)." \
> - "TIMEOUT value is $L_TimeOut (sec), "
> - SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - EndScope _IP6CONFIG_REGISTERDATANOTIFY_FUNC1_CASE2
> - EndLog
> - return
> - }
> - incr i
> - Stall 1
> - }
> -} else {
> - set assert fail
> - RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.SetData - Call SetData to set manual policy." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> - SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - EndScope _IP6CONFIG_REGISTERDATANOTIFY_FUNC1_CASE2
> - EndLog
> - return
> -}
> -
> -GetVar R_Context
> -if { $R_Context == $L_Context2 } {
> - set assert pass
> -} else {
> - set assert fail
> -}
> -
> -RecordAssertion $assert $Ip6ConfigRegisterDataNotifyFunc1AssertionGuid005 \
> - "Ip6Config.RegisterDataNotify - Event is signaled for DataType - Policy."
> -
> -#
> -# Check Point: Call Ip6Config->SetData to set [DadXmits] and check whether the event is signaled.
> -#
> -SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> -SetVar R_Ip6ConfigDataSize [Sizeof EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS]
> -SetVar R_Ip6ConfigDadTransmits.DupAddrDetectTransmits 3
> -
> -GetVar R_Context
> -set L_Context1 $R_Context
> -set L_Context2 [expr { $L_Context1 + 1 }]
> -
> -Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigDadTransmits,&@R_Status"
> -GetAck
> -GetVar R_Status
> -
> -if { $R_Status == $EFI_SUCCESS } {
> - set assert pass
> - RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.SetData - Call SetData to set DadXmits." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -} elseif { $R_Status == $EFI_NOT_READY } {
> - set i 0
> - set L_TimeOut 30
> - while { 1 > 0 } {
> - GetVar R_Context
> - if { $R_Context == $L_Context2 } {
> - break
> - } elseif { $i == $L_TimeOut } {
> - set assert fail
> - RecordAssertion $assert $GenericAssertionGuid \
> - "SetData failed.(event hasn't been signaled before TIMEOUT)." \
> - "TIMEOUT value is $L_TimeOut (sec), "
> -
> - SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - EndScope _IP6CONFIG_REGISTERDATANOTIFY_FUNC1_CASE2
> - EndLog
> - return
> - }
> - incr i
> - Stall 1
> - }
> -} else {
> - set assert fail
> - RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.SetData - Call SetData to set DadXmits." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> - SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - EndScope _IP6CONFIG_REGISTERDATANOTIFY_FUNC1_CASE2
> - EndLog
> - return
> -}
> -
> -GetVar R_Context
> -if { $R_Context == $L_Context2 } {
> - set assert pass
> -} else {
> - set assert fail
> -}
> -RecordAssertion $assert $Ip6ConfigRegisterDataNotifyFunc1AssertionGuid006 \
> - "Ip6Config.RegisterDataNotify - Event is signaled for DataType - DadXmits."
> -
> -#
> -# Clean up
> -#
> -SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> -Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.UnregisterDataNotify - Unregister notification event for configuration." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> -Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.UnregisterDataNotify - Unregister notification event for configuration." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -BS->CloseEvent {@R_DoneEvent,&@R_Status}
> -GetAck
> -
> -EndScope _IP6CONFIG_REGISTERDATANOTIFY_FUNC1_CASE2
> -
> +#
> +# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
> +# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
> +#
> +# This program and the accompanying materials
> +# are licensed and made available under the terms and conditions of the BSD License
> +# which accompanies this distribution. The full text of the license may be found at
> +# http://opensource.org/licenses/bsd-license.php
> +#
> +# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> +# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
> +#
> +################################################################################
> +CaseLevel FUNCTION
> +CaseAttribute AUTO
> +CaseVerboseLevel DEFAULT
> +set reportfile report.csv
> +
> +#
> +# test case Name, category, description, GUID...
> +#
> +CaseGuid 886AE98A-5D43-47b4-A339-85FB089F21FA
> +CaseName RegisterDataNotify.Func1.Case2
> +CaseCategory IP6Config
> +CaseDescription {RegisterDataNotify must succeed with valid parameters when one event registered on two data types.}
> +
> +################################################################################
> +Include IP6Config/Include/Ip6Config.inc.tcl
> +
> +
> +#
> +# Begin log ...
> +#
> +BeginLog
> +
> +#
> +# BeginScope
> +#
> +BeginScope _IP6CONFIG_REGISTERDATANOTIFY_FUNC1_CASE2
> +
> +#
> +# Parameter Definition
> +# R_ represents "Remote EFI Side Parameter"
> +# L_ represents "Local ENTS Side Parameter"
> +#
> +UINTN R_Status
> +UINTN R_Context
> +UINTN R_DoneEvent
> +UINTN R_Ip6ConfigDataSize
> +UINT32 R_Ip6ConfigDataType
> +EFI_IP6_CONFIG_INTERFACE_INFO R_Ip6ConfigInterfaceInfo
> +EFI_IP6_CONFIG_INTERFACE_ID R_Ip6ConfigInterfaceId
> +UINT32 R_Ip6ConfigPolicy
> +EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS R_Ip6ConfigDadTransmits
> +
> +#
> +# Check Point: Create Event and register it with data type [Policy] and [DadXmits]
> +#
> +SetVar R_Context 0
> +BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context,\
> + &@R_DoneEvent, &@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "BS.CreateEvent." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> +SetVar R_Ip6ConfigDataSize [Sizeof UINT32]
> +SetVar R_Ip6ConfigPolicy $IP6CP(Manual)
> +
> +Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $Ip6ConfigRegisterDataNotifyFunc1AssertionGuid003 \
> + "Ip6Config.RegisterDataNotify - Register notification event for configuration." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> +SetVar R_Ip6ConfigDataSize [Sizeof EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS]
> +SetVar R_Ip6ConfigDadTransmits.DupAddrDetectTransmits 3
> +
> +Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $Ip6ConfigRegisterDataNotifyFunc1AssertionGuid004 \
> + "Ip6Config.RegisterDataNotify - Register notification event for configuration." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +#
> +# Check Point: Call Ip6Cofnig->SetData to set [Policy] and check whether the event is signaled.
> +#
> +SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> +SetVar R_Ip6ConfigDataSize [Sizeof UINT32]
> +SetVar R_Ip6ConfigPolicy $IP6CP(Manual)
> +
> +GetVar R_Context
> +set L_Context1 $R_Context
> +set L_Context2 [expr { $L_Context1 + 1 }]
> +
> +Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_Status"
> +GetAck
> +GetVar R_Status
> +
> +if { $R_Status == $EFI_SUCCESS } {
> + set assert pass
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.SetData - Call SetData to set manual policy." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +} elseif { $R_Status == $EFI_NOT_READY } {
> + set i 0
> + set L_TimeOut 30
> + while { 1 > 0 } {
> + GetVar R_Context
> + if { $R_Context == $L_Context2 } {
> + break
> + } elseif { $i == $L_TimeOut } {
> + set assert fail
> + RecordAssertion $assert $GenericAssertionGuid \
> + "SetData failed.(event hasn't been signaled before TIMEOUT)." \
> + "TIMEOUT value is $L_TimeOut (sec), "
> + SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_REGISTERDATANOTIFY_FUNC1_CASE2
> + EndLog
> + return
> + }
> + incr i
> + Stall 1
> + }
> +} else {
> + set assert fail
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.SetData - Call SetData to set manual policy." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> + SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_REGISTERDATANOTIFY_FUNC1_CASE2
> + EndLog
> + return
> +}
> +
> +GetVar R_Context
> +if { $R_Context == $L_Context2 } {
> + set assert pass
> +} else {
> + set assert fail
> +}
> +
> +RecordAssertion $assert $Ip6ConfigRegisterDataNotifyFunc1AssertionGuid005 \
> + "Ip6Config.RegisterDataNotify - Event is signaled for DataType - Policy."
> +
> +#
> +# Check Point: Call Ip6Config->SetData to set [DadXmits] and check whether the event is signaled.
> +#
> +SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> +SetVar R_Ip6ConfigDataSize [Sizeof EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS]
> +SetVar R_Ip6ConfigDadTransmits.DupAddrDetectTransmits 3
> +
> +GetVar R_Context
> +set L_Context1 $R_Context
> +set L_Context2 [expr { $L_Context1 + 1 }]
> +
> +Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigDadTransmits,&@R_Status"
> +GetAck
> +GetVar R_Status
> +
> +if { $R_Status == $EFI_SUCCESS } {
> + set assert pass
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.SetData - Call SetData to set DadXmits." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +} elseif { $R_Status == $EFI_NOT_READY } {
> + set i 0
> + set L_TimeOut 30
> + while { 1 > 0 } {
> + GetVar R_Context
> + if { $R_Context == $L_Context2 } {
> + break
> + } elseif { $i == $L_TimeOut } {
> + set assert fail
> + RecordAssertion $assert $GenericAssertionGuid \
> + "SetData failed.(event hasn't been signaled before TIMEOUT)." \
> + "TIMEOUT value is $L_TimeOut (sec), "
> +
> + SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_REGISTERDATANOTIFY_FUNC1_CASE2
> + EndLog
> + return
> + }
> + incr i
> + Stall 1
> + }
> +} else {
> + set assert fail
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.SetData - Call SetData to set DadXmits." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> + SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_REGISTERDATANOTIFY_FUNC1_CASE2
> + EndLog
> + return
> +}
> +
> +GetVar R_Context
> +if { $R_Context == $L_Context2 } {
> + set assert pass
> +} else {
> + set assert fail
> +}
> +RecordAssertion $assert $Ip6ConfigRegisterDataNotifyFunc1AssertionGuid006 \
> + "Ip6Config.RegisterDataNotify - Event is signaled for DataType - DadXmits."
> +
> +#
> +# Clean up
> +#
> +SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> +Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.UnregisterDataNotify - Unregister notification event for configuration." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> +Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.UnregisterDataNotify - Unregister notification event for configuration." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +BS->CloseEvent {@R_DoneEvent,&@R_Status}
> +GetAck
> +
> +EndScope _IP6CONFIG_REGISTERDATANOTIFY_FUNC1_CASE2
> +
> EndLog
> \ No newline at end of file
> diff --git a/uefi-sct/EMS/Bin/TestCase/IP6Config/SetData.Conf1.Case1.tcl b/uefi-sct/EMS/Bin/TestCase/IP6Config/SetData.Conf1.Case1.tcl
> index 2213ec9..8c33521 100644
> --- a/uefi-sct/EMS/Bin/TestCase/IP6Config/SetData.Conf1.Case1.tcl
> +++ b/uefi-sct/EMS/Bin/TestCase/IP6Config/SetData.Conf1.Case1.tcl
> @@ -1,72 +1,72 @@
> -#
> -# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
> -# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
> -#
> -# This program and the accompanying materials
> -# are licensed and made available under the terms and conditions of the BSD License
> -# which accompanies this distribution. The full text of the license may be found at
> -# http://opensource.org/licenses/bsd-license.php
> -#
> -# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> -# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
> -#
> -################################################################################
> -CaseLevel CONFORMANCE
> -CaseAttribute AUTO
> -CaseVerboseLevel DEFAULT
> -set reportfile report.csv
> -
> -#
> -# test case Name, category, description, GUID...
> -#
> -CaseGuid EF4CCB73-577C-4b8c-96E3-91517F0B7056
> -CaseName SetData.Conf1.Case1
> -CaseCategory IP6Config
> -CaseDescription {SetData must not succeed when data is NULL.}
> -
> -################################################################################
> -Include IP6Config/Include/Ip6Config.inc.tcl
> -
> -
> -#
> -# Begin log ...
> -#
> -BeginLog
> -
> -#
> -# BeginScope
> -#
> -BeginScope _IP6CONFIG_SETDATA_CONF1
> -
> -#
> -# Parameter Definition
> -# R_ represents "Remote EFI Side Parameter"
> -# L_ represents "Local ENTS Side Parameter"
> -#
> -UINTN R_Status
> -UINTN R_Context
> -UINTN R_DoneEvent
> -UINTN R_Ip6ConfigDataSize
> -UINT32 R_Ip6ConfigDataType
> -EFI_IP6_CONFIG_INTERFACE_INFO R_Ip6ConfigInterfaceInfo
> -EFI_IP6_CONFIG_INTERFACE_ID R_Ip6ConfigInterfaceId
> -UINT32 R_Ip6ConfigPolicy
> -EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS R_Ip6ConfigDadTransmits
> -EFI_IP6_CONFIG_MANUAL_ADDRESS R_Ip6ConfigManualAddress
> -
> -#
> -# Check Point: Call Ip6Config->SetData with data is NULL.
> -#
> -SetVar R_Ip6ConfigDataType $IP6CDT(InterfaceInfo)
> -SetVar R_Ip6ConfigDataSize [Sizeof EFI_IP6_CONFIG_INTERFACE_INFO]
> -
> -Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,NULL,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_INVALID_PARAMETER]
> -RecordAssertion $assert $Ip6ConfigSetDataConf1AssertionGuid001 \
> - "Ip6Config.SetData - Call SetData with Data NULL." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_INVALID_PARAMETER"
> -
> -EndScope _IP6CONFIG_SETDATA_CONF1
> -
> +#
> +# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
> +# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
> +#
> +# This program and the accompanying materials
> +# are licensed and made available under the terms and conditions of the BSD License
> +# which accompanies this distribution. The full text of the license may be found at
> +# http://opensource.org/licenses/bsd-license.php
> +#
> +# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> +# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
> +#
> +################################################################################
> +CaseLevel CONFORMANCE
> +CaseAttribute AUTO
> +CaseVerboseLevel DEFAULT
> +set reportfile report.csv
> +
> +#
> +# test case Name, category, description, GUID...
> +#
> +CaseGuid EF4CCB73-577C-4b8c-96E3-91517F0B7056
> +CaseName SetData.Conf1.Case1
> +CaseCategory IP6Config
> +CaseDescription {SetData must not succeed when data is NULL.}
> +
> +################################################################################
> +Include IP6Config/Include/Ip6Config.inc.tcl
> +
> +
> +#
> +# Begin log ...
> +#
> +BeginLog
> +
> +#
> +# BeginScope
> +#
> +BeginScope _IP6CONFIG_SETDATA_CONF1
> +
> +#
> +# Parameter Definition
> +# R_ represents "Remote EFI Side Parameter"
> +# L_ represents "Local ENTS Side Parameter"
> +#
> +UINTN R_Status
> +UINTN R_Context
> +UINTN R_DoneEvent
> +UINTN R_Ip6ConfigDataSize
> +UINT32 R_Ip6ConfigDataType
> +EFI_IP6_CONFIG_INTERFACE_INFO R_Ip6ConfigInterfaceInfo
> +EFI_IP6_CONFIG_INTERFACE_ID R_Ip6ConfigInterfaceId
> +UINT32 R_Ip6ConfigPolicy
> +EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS R_Ip6ConfigDadTransmits
> +EFI_IP6_CONFIG_MANUAL_ADDRESS R_Ip6ConfigManualAddress
> +
> +#
> +# Check Point: Call Ip6Config->SetData with data is NULL.
> +#
> +SetVar R_Ip6ConfigDataType $IP6CDT(InterfaceInfo)
> +SetVar R_Ip6ConfigDataSize [Sizeof EFI_IP6_CONFIG_INTERFACE_INFO]
> +
> +Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,NULL,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_INVALID_PARAMETER]
> +RecordAssertion $assert $Ip6ConfigSetDataConf1AssertionGuid001 \
> + "Ip6Config.SetData - Call SetData with Data NULL." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_INVALID_PARAMETER"
> +
> +EndScope _IP6CONFIG_SETDATA_CONF1
> +
> EndLog
> \ No newline at end of file
> diff --git a/uefi-sct/EMS/Bin/TestCase/IP6Config/SetData.Conf2.Case1.tcl b/uefi-sct/EMS/Bin/TestCase/IP6Config/SetData.Conf2.Case1.tcl
> index f14a5bb..bbf7830 100644
> --- a/uefi-sct/EMS/Bin/TestCase/IP6Config/SetData.Conf2.Case1.tcl
> +++ b/uefi-sct/EMS/Bin/TestCase/IP6Config/SetData.Conf2.Case1.tcl
> @@ -1,299 +1,299 @@
> -#
> -# Copyright 2006 - 2017 Unified EFI, Inc.<BR>
> -# Copyright (c) 2010 - 2017, Intel Corporation. All rights reserved.<BR>
> -#
> -# This program and the accompanying materials
> -# are licensed and made available under the terms and conditions of the BSD License
> -# which accompanies this distribution. The full text of the license may be found at
> -# http://opensource.org/licenses/bsd-license.php
> -#
> -# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> -# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
> -#
> -################################################################################
> -CaseLevel CONFORMANCE
> -CaseAttribute AUTO
> -CaseVerboseLevel DEFAULT
> -set reportfile report.csv
> -
> -#
> -# test case Name, category, description, GUID...
> -#
> -CaseGuid A9BBCC37-3ED5-4c11-B6B6-BE52A1131568
> -CaseName SetData.Conf2.Case1
> -CaseCategory IP6Config
> -CaseDescription {SetData must not succeed when one or more fields in data is invalid.}
> -
> -################################################################################
> -Include IP6Config/Include/Ip6Config.inc.tcl
> -
> -
> -#
> -# Begin log ...
> -#
> -BeginLog
> -
> -#
> -# BeginScope
> -#
> -BeginScope _IP6CONFIG_SETDATA_CONF2
> -
> -#
> -# Parameter Definition
> -# R_ represents "Remote EFI Side Parameter"
> -# L_ represents "Local ENTS Side Parameter"
> -#
> -UINTN R_Status
> -UINTN R_Context
> -UINTN R_DoneEvent
> -UINTN R_Ip6ConfigDataSize
> -UINT32 R_Ip6ConfigDataType
> -EFI_IP6_CONFIG_INTERFACE_INFO R_Ip6ConfigInterfaceInfo
> -EFI_IP6_CONFIG_INTERFACE_ID R_Ip6ConfigInterfaceId
> -UINT32 R_Ip6ConfigPolicy
> -EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS R_Ip6ConfigDadTransmits
> -
> -#
> -# Check Point: Call Ip6Config->SetData to set manual policy
> -#
> -SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> -SetVar R_Ip6ConfigDataSize [Sizeof UINT32]
> -SetVar R_Ip6ConfigPolicy $IP6CP(Manual)
> -
> -SetVar R_Context 0
> -BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context,\
> - &@R_DoneEvent, &@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "BS.CreateEvent." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.RegisterDataNotify - Register notification event for configuration." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_Status"
> -GetAck
> -GetVar R_Status
> -if { $R_Status == $EFI_SUCCESS } {
> - set assert pass
> - RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.SetData - Call SetData to set manual policy." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -} elseif { $R_Status == $EFI_NOT_READY } {
> - set i 0
> - set L_TimeOut 30
> - while { 1 > 0 } {
> - GetVar R_Context
> - if { $R_Context == 1 } {
> - break
> - } elseif { $i == $L_TimeOut } {
> - set assert fail
> - RecordAssertion $assert $GenericAssertionGuid \
> - "SetData failed.(event hasn't been signaled before TIMEOUT)." \
> - "TIMEOUT value is $L_TimeOut (sec), "
> - SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - EndScope _IP6CONFIG_SETDATA_CONF2
> - EndLog
> - return
> - }
> - incr i
> - Stall 1
> - }
> -} else {
> - set assert fail
> - RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.SetData - Call SetData to set manual policy." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> - SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - EndScope _IP6CONFIG_SETDATA_CONF2
> - EndLog
> - return
> -}
> -
> -Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.GetData - Call GetData to get policy value." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -GetVar R_Ip6ConfigPolicy
> -if { $R_Ip6ConfigPolicy == $IP6CP(Manual) } {
> - set assert pass
> -} else {
> - set assert fail
> -
> - RecordAssertion $assert $GenericAssertionGuid \
> - "Set manual policy succeeds(event is signaled correctly and data correct)."
> - SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - EndScope _IP6CONFIG_SETDATA_CONF2
> - EndLog
> - return
> -}
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Set manual policy succeeds(event is signaled correctly and data correct)."
> -
> -#
> -# Check Point : Set Manual Address with "::"
> -#
> -EFI_IP6_CONFIG_MANUAL_ADDRESS R_Temp_Ip6ConfigManualAddress
> -
> -set L_ManualListLen 1
> -EFI_IP6_CONFIG_MANUAL_ADDRESS R_Ip6ConfigManualAddress
> -set L_UnitLen [Sizeof EFI_IP6_CONFIG_MANUAL_ADDRESS]
> -set L_ListLen [expr {$L_UnitLen * $L_ManualListLen}]
> -SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
> -SetVar R_Ip6ConfigDataSize $L_ListLen
> -SetVar R_Temp_Ip6ConfigManualAddress.IsAnycast FALSE
> -SetVar R_Temp_Ip6ConfigManualAddress.PrefixLength 64
> -SetIpv6Address R_Temp_Ip6ConfigManualAddress.Address "::"
> -SetVar R_Ip6ConfigManualAddress @R_Temp_Ip6ConfigManualAddress
> -
> -Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigManualAddress,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_INVALID_PARAMETER]
> -RecordAssertion $assert $Ip6ConfigSetDataConf2AssertionGuid001 \
> - "Ip6Config.SetData - Call SetData to set manual address (Not Unicast or Linklocal)." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_INVALID_PARAMETER"
> -
> -DelVar R_Ip6ConfigManualAddress
> -
> -#
> -# Check Point : Set Manual Address with duplication of list entries
> -#
> -set L_ManualListLen 3
> -EFI_IP6_CONFIG_MANUAL_ADDRESS R_Ip6ConfigManualAddress($L_ManualListLen)
> -set L_UnitLen [Sizeof EFI_IP6_CONFIG_MANUAL_ADDRESS]
> -set L_ListLen [expr {$L_UnitLen * $L_ManualListLen}]
> -SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
> -SetVar R_Ip6ConfigDataSize $L_ListLen
> -
> -SetVar R_Temp_Ip6ConfigManualAddress.IsAnycast FALSE
> -SetVar R_Temp_Ip6ConfigManualAddress.PrefixLength 64
> -SetIpv6Address R_Temp_Ip6ConfigManualAddress.Address "2002::5000"
> -SetVar R_Ip6ConfigManualAddress(0) @R_Temp_Ip6ConfigManualAddress
> -
> -SetVar R_Temp_Ip6ConfigManualAddress.IsAnycast FALSE
> -SetVar R_Temp_Ip6ConfigManualAddress.PrefixLength 64
> -SetIpv6Address R_Temp_Ip6ConfigManualAddress.Address "2002::5001"
> -SetVar R_Ip6ConfigManualAddress(1) @R_Temp_Ip6ConfigManualAddress
> -
> -SetVar R_Temp_Ip6ConfigManualAddress.IsAnycast FALSE
> -SetVar R_Temp_Ip6ConfigManualAddress.PrefixLength 64
> -SetIpv6Address R_Temp_Ip6ConfigManualAddress.Address "2002::5000"
> -SetVar R_Ip6ConfigManualAddress(2) @R_Temp_Ip6ConfigManualAddress
> -
> -Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigManualAddress,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_INVALID_PARAMETER]
> -RecordAssertion $assert $Ip6ConfigSetDataConf2AssertionGuid002 \
> - "Ip6Config.SetData - Call SetData to set manual address (duplication of list entries)." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_INVALID_PARAMETER"
> -
> -DelVar R_Ip6ConfigManualAddress
> -
> -#
> -# Check Points : Set Gateway with "ff02::1" (multicast address)
> -#
> -set L_GatewayListLen 1
> -EFI_IPv6_ADDRESS R_Temp_Ip6ConfigGateway
> -EFI_IPv6_ADDRESS R_Ip6ConfigGateway
> -set L_UnitLen [Sizeof EFI_IPv6_ADDRESS]
> -set L_ListLen [expr {$L_UnitLen * $L_GatewayListLen}]
> -SetVar R_Ip6ConfigDataType $IP6CDT(Gateway)
> -SetVar R_Ip6ConfigDataSize $L_ListLen
> -
> -SetIpv6Address R_Temp_Ip6ConfigGateway "ff02::1"
> -SetVar R_Ip6ConfigGateway @R_Temp_Ip6ConfigGateway
> -Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigGateway,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_INVALID_PARAMETER]
> -RecordAssertion $assert $Ip6ConfigSetDataConf2AssertionGuid003 \
> - "Ip6Config.SetData - Call SetData to set gateway with multicast address." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_INVALID_PARAMETER"
> -
> -DelVar R_Ip6ConfigGateway
> -
> -#
> -# Check Point : Set Gateway with duplication of list entries
> -#
> -set L_GatewayListLen 3
> -EFI_IPv6_ADDRESS R_Ip6ConfigGateway($L_GatewayListLen)
> -set L_UnitLen [Sizeof EFI_IPv6_ADDRESS]
> -set L_ListLen [expr {$L_UnitLen * $L_GatewayListLen}]
> -SetVar R_Ip6ConfigDataType $IP6CDT(Gateway)
> -SetVar R_Ip6ConfigDataSize $L_ListLen
> -
> -SetIpv6Address R_Temp_Ip6ConfigGateway "2002::5000"
> -SetVar R_Ip6ConfigGateway(0) @R_Temp_Ip6ConfigGateway
> -SetIpv6Address R_Temp_Ip6ConfigGateway "2002::5001"
> -SetVar R_Ip6ConfigGateway(1) @R_Temp_Ip6ConfigGateway
> -SetIpv6Address R_Temp_Ip6ConfigGateway "2002::5000"
> -SetVar R_Ip6ConfigGateway(2) @R_Temp_Ip6ConfigGateway
> -
> -Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigGateway,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_INVALID_PARAMETER]
> -RecordAssertion $assert $Ip6ConfigSetDataConf2AssertionGuid004 \
> - "Ip6Config.SetData - Call SetData to set gateway with duplication of list entries." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_INVALID_PARAMETER"
> -
> -DelVar R_Ip6ConfigGateway
> -
> -#
> -# Check Point : Set Dns Server with "ff02::1" (link local address)
> -#
> -set L_DnsServerListLen 1
> -EFI_IPv6_ADDRESS R_Temp_Ip6ConfigDnsServer
> -EFI_IPv6_ADDRESS R_Ip6ConfigDnsServer
> -set L_UnitLen [Sizeof EFI_IPv6_ADDRESS]
> -set L_ListLen [expr {$L_UnitLen * $L_DnsServerListLen}]
> -SetVar R_Ip6ConfigDataType $IP6CDT(DnsServer)
> -SetVar R_Ip6ConfigDataSize $L_ListLen
> -
> -SetIpv6Address R_Temp_Ip6ConfigDnsServer "ff02::1"
> -SetVar R_Ip6ConfigDnsServer @R_Temp_Ip6ConfigDnsServer
> -
> -Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigDnsServer,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_INVALID_PARAMETER]
> -RecordAssertion $assert $Ip6ConfigSetDataConf2AssertionGuid005 \
> - "Ip6Config.SetData - Call SetData to set dns server with multicast address." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_INVALID_PARAMETER"
> -
> -DelVar R_Ip6ConfigDnsServer
> -
> -#
> -# Clean up
> -#
> -SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> -Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.UnregisterDataNotify - Unregister notification event for configuration." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -BS->CloseEvent {@R_DoneEvent,&@R_Status}
> -GetAck
> -
> -EndScope _IP6CONFIG_SETDATA_CONF2
> -
> +#
> +# Copyright 2006 - 2017 Unified EFI, Inc.<BR>
> +# Copyright (c) 2010 - 2017, Intel Corporation. All rights reserved.<BR>
> +#
> +# This program and the accompanying materials
> +# are licensed and made available under the terms and conditions of the BSD License
> +# which accompanies this distribution. The full text of the license may be found at
> +# http://opensource.org/licenses/bsd-license.php
> +#
> +# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> +# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
> +#
> +################################################################################
> +CaseLevel CONFORMANCE
> +CaseAttribute AUTO
> +CaseVerboseLevel DEFAULT
> +set reportfile report.csv
> +
> +#
> +# test case Name, category, description, GUID...
> +#
> +CaseGuid A9BBCC37-3ED5-4c11-B6B6-BE52A1131568
> +CaseName SetData.Conf2.Case1
> +CaseCategory IP6Config
> +CaseDescription {SetData must not succeed when one or more fields in data is invalid.}
> +
> +################################################################################
> +Include IP6Config/Include/Ip6Config.inc.tcl
> +
> +
> +#
> +# Begin log ...
> +#
> +BeginLog
> +
> +#
> +# BeginScope
> +#
> +BeginScope _IP6CONFIG_SETDATA_CONF2
> +
> +#
> +# Parameter Definition
> +# R_ represents "Remote EFI Side Parameter"
> +# L_ represents "Local ENTS Side Parameter"
> +#
> +UINTN R_Status
> +UINTN R_Context
> +UINTN R_DoneEvent
> +UINTN R_Ip6ConfigDataSize
> +UINT32 R_Ip6ConfigDataType
> +EFI_IP6_CONFIG_INTERFACE_INFO R_Ip6ConfigInterfaceInfo
> +EFI_IP6_CONFIG_INTERFACE_ID R_Ip6ConfigInterfaceId
> +UINT32 R_Ip6ConfigPolicy
> +EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS R_Ip6ConfigDadTransmits
> +
> +#
> +# Check Point: Call Ip6Config->SetData to set manual policy
> +#
> +SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> +SetVar R_Ip6ConfigDataSize [Sizeof UINT32]
> +SetVar R_Ip6ConfigPolicy $IP6CP(Manual)
> +
> +SetVar R_Context 0
> +BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context,\
> + &@R_DoneEvent, &@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "BS.CreateEvent." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.RegisterDataNotify - Register notification event for configuration." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_Status"
> +GetAck
> +GetVar R_Status
> +if { $R_Status == $EFI_SUCCESS } {
> + set assert pass
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.SetData - Call SetData to set manual policy." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +} elseif { $R_Status == $EFI_NOT_READY } {
> + set i 0
> + set L_TimeOut 30
> + while { 1 > 0 } {
> + GetVar R_Context
> + if { $R_Context == 1 } {
> + break
> + } elseif { $i == $L_TimeOut } {
> + set assert fail
> + RecordAssertion $assert $GenericAssertionGuid \
> + "SetData failed.(event hasn't been signaled before TIMEOUT)." \
> + "TIMEOUT value is $L_TimeOut (sec), "
> + SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_SETDATA_CONF2
> + EndLog
> + return
> + }
> + incr i
> + Stall 1
> + }
> +} else {
> + set assert fail
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.SetData - Call SetData to set manual policy." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> + SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_SETDATA_CONF2
> + EndLog
> + return
> +}
> +
> +Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.GetData - Call GetData to get policy value." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +GetVar R_Ip6ConfigPolicy
> +if { $R_Ip6ConfigPolicy == $IP6CP(Manual) } {
> + set assert pass
> +} else {
> + set assert fail
> +
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Set manual policy succeeds(event is signaled correctly and data correct)."
> + SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_SETDATA_CONF2
> + EndLog
> + return
> +}
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Set manual policy succeeds(event is signaled correctly and data correct)."
> +
> +#
> +# Check Point : Set Manual Address with "::"
> +#
> +EFI_IP6_CONFIG_MANUAL_ADDRESS R_Temp_Ip6ConfigManualAddress
> +
> +set L_ManualListLen 1
> +EFI_IP6_CONFIG_MANUAL_ADDRESS R_Ip6ConfigManualAddress
> +set L_UnitLen [Sizeof EFI_IP6_CONFIG_MANUAL_ADDRESS]
> +set L_ListLen [expr {$L_UnitLen * $L_ManualListLen}]
> +SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
> +SetVar R_Ip6ConfigDataSize $L_ListLen
> +SetVar R_Temp_Ip6ConfigManualAddress.IsAnycast FALSE
> +SetVar R_Temp_Ip6ConfigManualAddress.PrefixLength 64
> +SetIpv6Address R_Temp_Ip6ConfigManualAddress.Address "::"
> +SetVar R_Ip6ConfigManualAddress @R_Temp_Ip6ConfigManualAddress
> +
> +Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigManualAddress,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_INVALID_PARAMETER]
> +RecordAssertion $assert $Ip6ConfigSetDataConf2AssertionGuid001 \
> + "Ip6Config.SetData - Call SetData to set manual address (Not Unicast or Linklocal)." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_INVALID_PARAMETER"
> +
> +DelVar R_Ip6ConfigManualAddress
> +
> +#
> +# Check Point : Set Manual Address with duplication of list entries
> +#
> +set L_ManualListLen 3
> +EFI_IP6_CONFIG_MANUAL_ADDRESS R_Ip6ConfigManualAddress($L_ManualListLen)
> +set L_UnitLen [Sizeof EFI_IP6_CONFIG_MANUAL_ADDRESS]
> +set L_ListLen [expr {$L_UnitLen * $L_ManualListLen}]
> +SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
> +SetVar R_Ip6ConfigDataSize $L_ListLen
> +
> +SetVar R_Temp_Ip6ConfigManualAddress.IsAnycast FALSE
> +SetVar R_Temp_Ip6ConfigManualAddress.PrefixLength 64
> +SetIpv6Address R_Temp_Ip6ConfigManualAddress.Address "2002::5000"
> +SetVar R_Ip6ConfigManualAddress(0) @R_Temp_Ip6ConfigManualAddress
> +
> +SetVar R_Temp_Ip6ConfigManualAddress.IsAnycast FALSE
> +SetVar R_Temp_Ip6ConfigManualAddress.PrefixLength 64
> +SetIpv6Address R_Temp_Ip6ConfigManualAddress.Address "2002::5001"
> +SetVar R_Ip6ConfigManualAddress(1) @R_Temp_Ip6ConfigManualAddress
> +
> +SetVar R_Temp_Ip6ConfigManualAddress.IsAnycast FALSE
> +SetVar R_Temp_Ip6ConfigManualAddress.PrefixLength 64
> +SetIpv6Address R_Temp_Ip6ConfigManualAddress.Address "2002::5000"
> +SetVar R_Ip6ConfigManualAddress(2) @R_Temp_Ip6ConfigManualAddress
> +
> +Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigManualAddress,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_INVALID_PARAMETER]
> +RecordAssertion $assert $Ip6ConfigSetDataConf2AssertionGuid002 \
> + "Ip6Config.SetData - Call SetData to set manual address (duplication of list entries)." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_INVALID_PARAMETER"
> +
> +DelVar R_Ip6ConfigManualAddress
> +
> +#
> +# Check Points : Set Gateway with "ff02::1" (multicast address)
> +#
> +set L_GatewayListLen 1
> +EFI_IPv6_ADDRESS R_Temp_Ip6ConfigGateway
> +EFI_IPv6_ADDRESS R_Ip6ConfigGateway
> +set L_UnitLen [Sizeof EFI_IPv6_ADDRESS]
> +set L_ListLen [expr {$L_UnitLen * $L_GatewayListLen}]
> +SetVar R_Ip6ConfigDataType $IP6CDT(Gateway)
> +SetVar R_Ip6ConfigDataSize $L_ListLen
> +
> +SetIpv6Address R_Temp_Ip6ConfigGateway "ff02::1"
> +SetVar R_Ip6ConfigGateway @R_Temp_Ip6ConfigGateway
> +Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigGateway,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_INVALID_PARAMETER]
> +RecordAssertion $assert $Ip6ConfigSetDataConf2AssertionGuid003 \
> + "Ip6Config.SetData - Call SetData to set gateway with multicast address." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_INVALID_PARAMETER"
> +
> +DelVar R_Ip6ConfigGateway
> +
> +#
> +# Check Point : Set Gateway with duplication of list entries
> +#
> +set L_GatewayListLen 3
> +EFI_IPv6_ADDRESS R_Ip6ConfigGateway($L_GatewayListLen)
> +set L_UnitLen [Sizeof EFI_IPv6_ADDRESS]
> +set L_ListLen [expr {$L_UnitLen * $L_GatewayListLen}]
> +SetVar R_Ip6ConfigDataType $IP6CDT(Gateway)
> +SetVar R_Ip6ConfigDataSize $L_ListLen
> +
> +SetIpv6Address R_Temp_Ip6ConfigGateway "2002::5000"
> +SetVar R_Ip6ConfigGateway(0) @R_Temp_Ip6ConfigGateway
> +SetIpv6Address R_Temp_Ip6ConfigGateway "2002::5001"
> +SetVar R_Ip6ConfigGateway(1) @R_Temp_Ip6ConfigGateway
> +SetIpv6Address R_Temp_Ip6ConfigGateway "2002::5000"
> +SetVar R_Ip6ConfigGateway(2) @R_Temp_Ip6ConfigGateway
> +
> +Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigGateway,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_INVALID_PARAMETER]
> +RecordAssertion $assert $Ip6ConfigSetDataConf2AssertionGuid004 \
> + "Ip6Config.SetData - Call SetData to set gateway with duplication of list entries." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_INVALID_PARAMETER"
> +
> +DelVar R_Ip6ConfigGateway
> +
> +#
> +# Check Point : Set Dns Server with "ff02::1" (link local address)
> +#
> +set L_DnsServerListLen 1
> +EFI_IPv6_ADDRESS R_Temp_Ip6ConfigDnsServer
> +EFI_IPv6_ADDRESS R_Ip6ConfigDnsServer
> +set L_UnitLen [Sizeof EFI_IPv6_ADDRESS]
> +set L_ListLen [expr {$L_UnitLen * $L_DnsServerListLen}]
> +SetVar R_Ip6ConfigDataType $IP6CDT(DnsServer)
> +SetVar R_Ip6ConfigDataSize $L_ListLen
> +
> +SetIpv6Address R_Temp_Ip6ConfigDnsServer "ff02::1"
> +SetVar R_Ip6ConfigDnsServer @R_Temp_Ip6ConfigDnsServer
> +
> +Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigDnsServer,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_INVALID_PARAMETER]
> +RecordAssertion $assert $Ip6ConfigSetDataConf2AssertionGuid005 \
> + "Ip6Config.SetData - Call SetData to set dns server with multicast address." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_INVALID_PARAMETER"
> +
> +DelVar R_Ip6ConfigDnsServer
> +
> +#
> +# Clean up
> +#
> +SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> +Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.UnregisterDataNotify - Unregister notification event for configuration." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +BS->CloseEvent {@R_DoneEvent,&@R_Status}
> +GetAck
> +
> +EndScope _IP6CONFIG_SETDATA_CONF2
> +
> EndLog
> \ No newline at end of file
> diff --git a/uefi-sct/EMS/Bin/TestCase/IP6Config/SetData.Conf3.Case1.tcl b/uefi-sct/EMS/Bin/TestCase/IP6Config/SetData.Conf3.Case1.tcl
> index 84a13c6..1cfc489 100644
> --- a/uefi-sct/EMS/Bin/TestCase/IP6Config/SetData.Conf3.Case1.tcl
> +++ b/uefi-sct/EMS/Bin/TestCase/IP6Config/SetData.Conf3.Case1.tcl
> @@ -1,72 +1,72 @@
> -#
> -# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
> -# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
> -#
> -# This program and the accompanying materials
> -# are licensed and made available under the terms and conditions of the BSD License
> -# which accompanies this distribution. The full text of the license may be found at
> -# http://opensource.org/licenses/bsd-license.php
> -#
> -# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> -# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
> -#
> -################################################################################
> -CaseLevel CONFORMANCE
> -CaseAttribute AUTO
> -CaseVerboseLevel DEFAULT
> -set reportfile report.csv
> -
> -#
> -# test case Name, category, description, GUID...
> -#
> -CaseGuid 2FCE7A2D-09F4-4c8e-97CD-68A0045E34B8
> -CaseName SetData.Conf3.Case1
> -CaseCategory IP6Config
> -CaseDescription {SetData must not succeed when data is read-only type.}
> -
> -################################################################################
> -Include IP6Config/Include/Ip6Config.inc.tcl
> -
> -
> -#
> -# Begin log ...
> -#
> -BeginLog
> -
> -#
> -# BeginScope
> -#
> -BeginScope _IP6CONFIG_SETDATA_CONF3
> -
> -#
> -# Parameter Definition
> -# R_ represents "Remote EFI Side Parameter"
> -# L_ represents "Local ENTS Side Parameter"
> -#
> -UINTN R_Status
> -UINTN R_Context
> -UINTN R_DoneEvent
> -UINTN R_Ip6ConfigDataSize
> -UINT32 R_Ip6ConfigDataType
> -EFI_IP6_CONFIG_INTERFACE_INFO R_Ip6ConfigInterfaceInfo
> -EFI_IP6_CONFIG_INTERFACE_ID R_Ip6ConfigInterfaceId
> -UINT32 R_Ip6ConfigPolicy
> -EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS R_Ip6ConfigDadTransmits
> -EFI_IP6_CONFIG_MANUAL_ADDRESS R_Ip6ConfigManualAddress
> -
> -#
> -# Check Point: Call Ip6Config->SetData with data is read only.
> -#
> -SetVar R_Ip6ConfigDataType $IP6CDT(InterfaceInfo)
> -SetVar R_Ip6ConfigDataSize [Sizeof EFI_IP6_CONFIG_INTERFACE_INFO]
> -
> -Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigInterfaceInfo,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_WRITE_PROTECTED]
> -RecordAssertion $assert $Ip6ConfigSetDataConf3AssertionGuid001 \
> - "Ip6Config.SetData - Call SetData with data is read only." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_WRITE_PROTECTED"
> -
> -EndScope _IP6CONFIG_SETDATA_CONF3
> -
> +#
> +# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
> +# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
> +#
> +# This program and the accompanying materials
> +# are licensed and made available under the terms and conditions of the BSD License
> +# which accompanies this distribution. The full text of the license may be found at
> +# http://opensource.org/licenses/bsd-license.php
> +#
> +# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> +# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
> +#
> +################################################################################
> +CaseLevel CONFORMANCE
> +CaseAttribute AUTO
> +CaseVerboseLevel DEFAULT
> +set reportfile report.csv
> +
> +#
> +# test case Name, category, description, GUID...
> +#
> +CaseGuid 2FCE7A2D-09F4-4c8e-97CD-68A0045E34B8
> +CaseName SetData.Conf3.Case1
> +CaseCategory IP6Config
> +CaseDescription {SetData must not succeed when data is read-only type.}
> +
> +################################################################################
> +Include IP6Config/Include/Ip6Config.inc.tcl
> +
> +
> +#
> +# Begin log ...
> +#
> +BeginLog
> +
> +#
> +# BeginScope
> +#
> +BeginScope _IP6CONFIG_SETDATA_CONF3
> +
> +#
> +# Parameter Definition
> +# R_ represents "Remote EFI Side Parameter"
> +# L_ represents "Local ENTS Side Parameter"
> +#
> +UINTN R_Status
> +UINTN R_Context
> +UINTN R_DoneEvent
> +UINTN R_Ip6ConfigDataSize
> +UINT32 R_Ip6ConfigDataType
> +EFI_IP6_CONFIG_INTERFACE_INFO R_Ip6ConfigInterfaceInfo
> +EFI_IP6_CONFIG_INTERFACE_ID R_Ip6ConfigInterfaceId
> +UINT32 R_Ip6ConfigPolicy
> +EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS R_Ip6ConfigDadTransmits
> +EFI_IP6_CONFIG_MANUAL_ADDRESS R_Ip6ConfigManualAddress
> +
> +#
> +# Check Point: Call Ip6Config->SetData with data is read only.
> +#
> +SetVar R_Ip6ConfigDataType $IP6CDT(InterfaceInfo)
> +SetVar R_Ip6ConfigDataSize [Sizeof EFI_IP6_CONFIG_INTERFACE_INFO]
> +
> +Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigInterfaceInfo,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_WRITE_PROTECTED]
> +RecordAssertion $assert $Ip6ConfigSetDataConf3AssertionGuid001 \
> + "Ip6Config.SetData - Call SetData with data is read only." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_WRITE_PROTECTED"
> +
> +EndScope _IP6CONFIG_SETDATA_CONF3
> +
> EndLog
> \ No newline at end of file
> diff --git a/uefi-sct/EMS/Bin/TestCase/IP6Config/SetData.Conf4.Case1.tcl b/uefi-sct/EMS/Bin/TestCase/IP6Config/SetData.Conf4.Case1.tcl
> index 04235cc..597fdac 100644
> --- a/uefi-sct/EMS/Bin/TestCase/IP6Config/SetData.Conf4.Case1.tcl
> +++ b/uefi-sct/EMS/Bin/TestCase/IP6Config/SetData.Conf4.Case1.tcl
> @@ -1,238 +1,238 @@
> -#
> -# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
> -# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
> -#
> -# This program and the accompanying materials
> -# are licensed and made available under the terms and conditions of the BSD License
> -# which accompanies this distribution. The full text of the license may be found at
> -# http://opensource.org/licenses/bsd-license.php
> -#
> -# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> -# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
> -#
> -################################################################################
> -CaseLevel CONFORMANCE
> -CaseAttribute AUTO
> -CaseVerboseLevel DEFAULT
> -set reportfile report.csv
> -
> -#
> -# test case Name, category, description, GUID...
> -#
> -CaseGuid D0A2D271-0BBF-4092-A61E-96FB23208DE0
> -CaseName SetData.Conf4.Case1
> -CaseCategory IP6Config
> -CaseDescription {SetData must not succeed when data is not configurable in current policy.}
> -
> -################################################################################
> -Include IP6Config/Include/Ip6Config.inc.tcl
> -
> -
> -#
> -# Begin log ...
> -#
> -BeginLog
> -
> -#
> -# BeginScope
> -#
> -BeginScope _IP6CONFIG_SETDATA_CONF4
> -
> -#
> -# Parameter Definition
> -# R_ represents "Remote EFI Side Parameter"
> -# L_ represents "Local ENTS Side Parameter"
> -#
> -UINTN R_Status
> -UINTN R_Context
> -UINTN R_DoneEvent
> -UINTN R_Ip6ConfigDataSize
> -UINT32 R_Ip6ConfigDataType
> -EFI_IP6_CONFIG_INTERFACE_INFO R_Ip6ConfigInterfaceInfo
> -EFI_IP6_CONFIG_INTERFACE_ID R_Ip6ConfigInterfaceId
> -UINT32 R_Ip6ConfigPolicy
> -EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS R_Ip6ConfigDadTransmits
> -
> -#
> -# Check Point: Call Ip6Config->SetData to set manual policy
> -#
> -SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> -SetVar R_Ip6ConfigDataSize [Sizeof UINT32]
> -SetVar R_Ip6ConfigPolicy $IP6CP(Automatic)
> -
> -SetVar R_Context 0
> -BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context,\
> - &@R_DoneEvent, &@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "BS.CreateEvent." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.RegisterDataNotify - Register notification event for configuration." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_Status"
> -GetAck
> -GetVar R_Status
> -if { $R_Status == $EFI_SUCCESS } {
> - set assert pass
> - RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.SetData - Call SetData to set manual policy." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -} elseif { $R_Status == $EFI_NOT_READY } {
> - set i 0
> - set L_TimeOut 30
> - while { 1 > 0 } {
> - GetVar R_Context
> - if { $R_Context == 1 } {
> - break
> - } elseif { $i == $L_TimeOut } {
> - set assert fail
> - RecordAssertion $assert $GenericAssertionGuid \
> - "SetData failed.(event hasn't been signaled before TIMEOUT)." \
> - "TIMEOUT value is $L_TimeOut (sec), "
> - SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - EndScope _IP6CONFIG_SETDATA_CONF4
> - EndLog
> - return
> - }
> - incr i
> - Stall 1
> - }
> -} else {
> - set assert fail
> - RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.SetData - Call SetData to set manual policy." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> - SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - EndScope _IP6CONFIG_SETDATA_CONF4
> - EndLog
> - return
> -}
> -
> -Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.GetData - Call GetData to get policy value." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -GetVar R_Ip6ConfigPolicy
> -if { $R_Ip6ConfigPolicy == $IP6CP(Automatic) } {
> - set assert pass
> -} else {
> - set assert fail
> -
> - RecordAssertion $assert $GenericAssertionGuid \
> - "Set automatic policy succeeds(event is signaled correctly and data correct)."
> - SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - EndScope _IP6CONFIG_SETDATA_CONF4
> - EndLog
> - return
> -}
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Set automatic policy succeeds(event is signaled correctly and data correct)."
> -
> -#
> -# Check Point : Set Manual Address under automatic policy
> -#
> -EFI_IP6_CONFIG_MANUAL_ADDRESS R_Temp_Ip6ConfigManualAddress
> -
> -set L_ManualListLen 1
> -EFI_IP6_CONFIG_MANUAL_ADDRESS R_Ip6ConfigManualAddress
> -set L_UnitLen [Sizeof EFI_IP6_CONFIG_MANUAL_ADDRESS]
> -set L_ListLen [expr {$L_UnitLen * $L_ManualListLen}]
> -SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
> -SetVar R_Ip6ConfigDataSize $L_ListLen
> -SetVar R_Temp_Ip6ConfigManualAddress.IsAnycast FALSE
> -SetVar R_Temp_Ip6ConfigManualAddress.PrefixLength 64
> -SetIpv6Address R_Temp_Ip6ConfigManualAddress.Address "2002::5000"
> -SetVar R_Ip6ConfigManualAddress @R_Temp_Ip6ConfigManualAddress
> -
> -Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigManualAddress,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_WRITE_PROTECTED]
> -RecordAssertion $assert $Ip6ConfigSetDataConf4AssertionGuid001 \
> - "Ip6Config.SetData - Call SetData to set manual address under automatic poilcy." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_WRITE_PROTECTED"
> -
> -DelVar R_Ip6ConfigManualAddress
> -
> -#
> -# Check Points : Set Gateway under automatic policy
> -#
> -set L_GatewayListLen 1
> -EFI_IPv6_ADDRESS R_Temp_Ip6ConfigGateway
> -EFI_IPv6_ADDRESS R_Ip6ConfigGateway
> -set L_UnitLen [Sizeof EFI_IPv6_ADDRESS]
> -set L_ListLen [expr {$L_UnitLen * $L_GatewayListLen}]
> -SetVar R_Ip6ConfigDataType $IP6CDT(Gateway)
> -SetVar R_Ip6ConfigDataSize $L_ListLen
> -
> -SetIpv6Address R_Temp_Ip6ConfigGateway "2002::5001"
> -SetVar R_Ip6ConfigGateway @R_Temp_Ip6ConfigGateway
> -Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigGateway,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_WRITE_PROTECTED]
> -RecordAssertion $assert $Ip6ConfigSetDataConf4AssertionGuid002 \
> - "Ip6Config.SetData - Call SetData to set gateway under automatic policy." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_WRITE_PROTECTED"
> -
> -DelVar R_Ip6ConfigGateway
> -
> -#
> -# Check Point : Set Dns Server under automatic policy
> -#
> -set L_DnsServerListLen 1
> -EFI_IPv6_ADDRESS R_Temp_Ip6ConfigDnsServer
> -EFI_IPv6_ADDRESS R_Ip6ConfigDnsServer
> -set L_UnitLen [Sizeof EFI_IPv6_ADDRESS]
> -set L_ListLen [expr {$L_UnitLen * $L_DnsServerListLen}]
> -SetVar R_Ip6ConfigDataType $IP6CDT(DnsServer)
> -SetVar R_Ip6ConfigDataSize $L_ListLen
> -
> -SetIpv6Address R_Temp_Ip6ConfigDnsServer "2002::5001"
> -SetVar R_Ip6ConfigDnsServer @R_Temp_Ip6ConfigDnsServer
> -
> -Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigDnsServer,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_WRITE_PROTECTED]
> -RecordAssertion $assert $Ip6ConfigSetDataConf4AssertionGuid003 \
> - "Ip6Config.SetData - Call SetData to set dns server under automatic policy." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_WRITE_PROTECTED"
> -
> -DelVar R_Ip6ConfigDnsServer
> -
> -#
> -# Clean up
> -#
> -SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> -Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.UnregisterDataNotify - Unregister notification event for configuration." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -BS->CloseEvent {@R_DoneEvent,&@R_Status}
> -GetAck
> -
> -EndScope _IP6CONFIG_SETDATA_CONF4
> -
> +#
> +# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
> +# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
> +#
> +# This program and the accompanying materials
> +# are licensed and made available under the terms and conditions of the BSD License
> +# which accompanies this distribution. The full text of the license may be found at
> +# http://opensource.org/licenses/bsd-license.php
> +#
> +# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> +# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
> +#
> +################################################################################
> +CaseLevel CONFORMANCE
> +CaseAttribute AUTO
> +CaseVerboseLevel DEFAULT
> +set reportfile report.csv
> +
> +#
> +# test case Name, category, description, GUID...
> +#
> +CaseGuid D0A2D271-0BBF-4092-A61E-96FB23208DE0
> +CaseName SetData.Conf4.Case1
> +CaseCategory IP6Config
> +CaseDescription {SetData must not succeed when data is not configurable in current policy.}
> +
> +################################################################################
> +Include IP6Config/Include/Ip6Config.inc.tcl
> +
> +
> +#
> +# Begin log ...
> +#
> +BeginLog
> +
> +#
> +# BeginScope
> +#
> +BeginScope _IP6CONFIG_SETDATA_CONF4
> +
> +#
> +# Parameter Definition
> +# R_ represents "Remote EFI Side Parameter"
> +# L_ represents "Local ENTS Side Parameter"
> +#
> +UINTN R_Status
> +UINTN R_Context
> +UINTN R_DoneEvent
> +UINTN R_Ip6ConfigDataSize
> +UINT32 R_Ip6ConfigDataType
> +EFI_IP6_CONFIG_INTERFACE_INFO R_Ip6ConfigInterfaceInfo
> +EFI_IP6_CONFIG_INTERFACE_ID R_Ip6ConfigInterfaceId
> +UINT32 R_Ip6ConfigPolicy
> +EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS R_Ip6ConfigDadTransmits
> +
> +#
> +# Check Point: Call Ip6Config->SetData to set manual policy
> +#
> +SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> +SetVar R_Ip6ConfigDataSize [Sizeof UINT32]
> +SetVar R_Ip6ConfigPolicy $IP6CP(Automatic)
> +
> +SetVar R_Context 0
> +BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context,\
> + &@R_DoneEvent, &@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "BS.CreateEvent." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.RegisterDataNotify - Register notification event for configuration." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_Status"
> +GetAck
> +GetVar R_Status
> +if { $R_Status == $EFI_SUCCESS } {
> + set assert pass
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.SetData - Call SetData to set manual policy." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +} elseif { $R_Status == $EFI_NOT_READY } {
> + set i 0
> + set L_TimeOut 30
> + while { 1 > 0 } {
> + GetVar R_Context
> + if { $R_Context == 1 } {
> + break
> + } elseif { $i == $L_TimeOut } {
> + set assert fail
> + RecordAssertion $assert $GenericAssertionGuid \
> + "SetData failed.(event hasn't been signaled before TIMEOUT)." \
> + "TIMEOUT value is $L_TimeOut (sec), "
> + SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_SETDATA_CONF4
> + EndLog
> + return
> + }
> + incr i
> + Stall 1
> + }
> +} else {
> + set assert fail
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.SetData - Call SetData to set manual policy." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> + SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_SETDATA_CONF4
> + EndLog
> + return
> +}
> +
> +Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.GetData - Call GetData to get policy value." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +GetVar R_Ip6ConfigPolicy
> +if { $R_Ip6ConfigPolicy == $IP6CP(Automatic) } {
> + set assert pass
> +} else {
> + set assert fail
> +
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Set automatic policy succeeds(event is signaled correctly and data correct)."
> + SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_SETDATA_CONF4
> + EndLog
> + return
> +}
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Set automatic policy succeeds(event is signaled correctly and data correct)."
> +
> +#
> +# Check Point : Set Manual Address under automatic policy
> +#
> +EFI_IP6_CONFIG_MANUAL_ADDRESS R_Temp_Ip6ConfigManualAddress
> +
> +set L_ManualListLen 1
> +EFI_IP6_CONFIG_MANUAL_ADDRESS R_Ip6ConfigManualAddress
> +set L_UnitLen [Sizeof EFI_IP6_CONFIG_MANUAL_ADDRESS]
> +set L_ListLen [expr {$L_UnitLen * $L_ManualListLen}]
> +SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
> +SetVar R_Ip6ConfigDataSize $L_ListLen
> +SetVar R_Temp_Ip6ConfigManualAddress.IsAnycast FALSE
> +SetVar R_Temp_Ip6ConfigManualAddress.PrefixLength 64
> +SetIpv6Address R_Temp_Ip6ConfigManualAddress.Address "2002::5000"
> +SetVar R_Ip6ConfigManualAddress @R_Temp_Ip6ConfigManualAddress
> +
> +Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigManualAddress,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_WRITE_PROTECTED]
> +RecordAssertion $assert $Ip6ConfigSetDataConf4AssertionGuid001 \
> + "Ip6Config.SetData - Call SetData to set manual address under automatic poilcy." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_WRITE_PROTECTED"
> +
> +DelVar R_Ip6ConfigManualAddress
> +
> +#
> +# Check Points : Set Gateway under automatic policy
> +#
> +set L_GatewayListLen 1
> +EFI_IPv6_ADDRESS R_Temp_Ip6ConfigGateway
> +EFI_IPv6_ADDRESS R_Ip6ConfigGateway
> +set L_UnitLen [Sizeof EFI_IPv6_ADDRESS]
> +set L_ListLen [expr {$L_UnitLen * $L_GatewayListLen}]
> +SetVar R_Ip6ConfigDataType $IP6CDT(Gateway)
> +SetVar R_Ip6ConfigDataSize $L_ListLen
> +
> +SetIpv6Address R_Temp_Ip6ConfigGateway "2002::5001"
> +SetVar R_Ip6ConfigGateway @R_Temp_Ip6ConfigGateway
> +Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigGateway,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_WRITE_PROTECTED]
> +RecordAssertion $assert $Ip6ConfigSetDataConf4AssertionGuid002 \
> + "Ip6Config.SetData - Call SetData to set gateway under automatic policy." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_WRITE_PROTECTED"
> +
> +DelVar R_Ip6ConfigGateway
> +
> +#
> +# Check Point : Set Dns Server under automatic policy
> +#
> +set L_DnsServerListLen 1
> +EFI_IPv6_ADDRESS R_Temp_Ip6ConfigDnsServer
> +EFI_IPv6_ADDRESS R_Ip6ConfigDnsServer
> +set L_UnitLen [Sizeof EFI_IPv6_ADDRESS]
> +set L_ListLen [expr {$L_UnitLen * $L_DnsServerListLen}]
> +SetVar R_Ip6ConfigDataType $IP6CDT(DnsServer)
> +SetVar R_Ip6ConfigDataSize $L_ListLen
> +
> +SetIpv6Address R_Temp_Ip6ConfigDnsServer "2002::5001"
> +SetVar R_Ip6ConfigDnsServer @R_Temp_Ip6ConfigDnsServer
> +
> +Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigDnsServer,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_WRITE_PROTECTED]
> +RecordAssertion $assert $Ip6ConfigSetDataConf4AssertionGuid003 \
> + "Ip6Config.SetData - Call SetData to set dns server under automatic policy." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_WRITE_PROTECTED"
> +
> +DelVar R_Ip6ConfigDnsServer
> +
> +#
> +# Clean up
> +#
> +SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> +Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.UnregisterDataNotify - Unregister notification event for configuration." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +BS->CloseEvent {@R_DoneEvent,&@R_Status}
> +GetAck
> +
> +EndScope _IP6CONFIG_SETDATA_CONF4
> +
> EndLog
> \ No newline at end of file
> diff --git a/uefi-sct/EMS/Bin/TestCase/IP6Config/SetData.Conf5.Case1.tcl b/uefi-sct/EMS/Bin/TestCase/IP6Config/SetData.Conf5.Case1.tcl
> index 9b7e9c1..5e5a3e1 100644
> --- a/uefi-sct/EMS/Bin/TestCase/IP6Config/SetData.Conf5.Case1.tcl
> +++ b/uefi-sct/EMS/Bin/TestCase/IP6Config/SetData.Conf5.Case1.tcl
> @@ -1,279 +1,279 @@
> -#
> -# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
> -# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
> -#
> -# This program and the accompanying materials
> -# are licensed and made available under the terms and conditions of the BSD License
> -# which accompanies this distribution. The full text of the license may be found at
> -# http://opensource.org/licenses/bsd-license.php
> -#
> -# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> -# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
> -#
> -################################################################################
> -CaseLevel CONFORMANCE
> -CaseAttribute AUTO
> -CaseVerboseLevel DEFAULT
> -set reportfile report.csv
> -
> -#
> -# test case Name, category, description, GUID...
> -#
> -CaseGuid 1F1728C3-BB62-4f28-9D75-6E631F7A6833
> -CaseName SetData.Conf5.Case1
> -CaseCategory IP6Config
> -CaseDescription {SetData must not succeed when data size does not match the data type.}
> -
> -################################################################################
> -Include IP6Config/Include/Ip6Config.inc.tcl
> -
> -
> -#
> -# Begin log ...
> -#
> -BeginLog
> -
> -#
> -# BeginScope
> -#
> -BeginScope _IP6CONFIG_SETDATA_CONF5
> -
> -#
> -# Parameter Definition
> -# R_ represents "Remote EFI Side Parameter"
> -# L_ represents "Local ENTS Side Parameter"
> -#
> -UINTN R_Status
> -UINTN R_Context
> -UINTN R_DoneEvent
> -UINTN R_Ip6ConfigDataSize
> -UINT32 R_Ip6ConfigDataType
> -EFI_IP6_CONFIG_INTERFACE_INFO R_Ip6ConfigInterfaceInfo
> -EFI_IP6_CONFIG_INTERFACE_ID R_Ip6ConfigInterfaceId
> -UINT32 R_Ip6ConfigPolicy
> -EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS R_Ip6ConfigDadTransmits
> -
> -#
> -# Check Point: Call Ip6Config->SetData to set manual policy
> -#
> -SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> -SetVar R_Ip6ConfigDataSize [Sizeof UINT32]
> -SetVar R_Ip6ConfigPolicy $IP6CP(Manual)
> -
> -SetVar R_Context 0
> -BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context,\
> - &@R_DoneEvent, &@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "BS.CreateEvent." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.RegisterDataNotify - Register notification event for configuration." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_Status"
> -GetAck
> -GetVar R_Status
> -if { $R_Status == $EFI_SUCCESS } {
> - set assert pass
> - RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.SetData - Call SetData to set manual policy." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -} elseif { $R_Status == $EFI_NOT_READY } {
> - set i 0
> - set L_TimeOut 30
> - while { 1 > 0 } {
> - GetVar R_Context
> - if { $R_Context == 1 } {
> - break
> - } elseif { $i == $L_TimeOut } {
> - set assert fail
> - RecordAssertion $assert $GenericAssertionGuid \
> - "SetData failed.(event hasn't been signaled before TIMEOUT)." \
> - "TIMEOUT value is $L_TimeOut (sec), "
> - SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - EndScope _IP6CONFIG_SETDATA_CONF5
> - EndLog
> - return
> - }
> - incr i
> - Stall 1
> - }
> -} else {
> - set assert fail
> - RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.SetData - Call SetData to set manual policy." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> - SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - EndScope _IP6CONFIG_SETDATA_CONF5
> - EndLog
> - return
> -}
> -
> -Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.GetData - Call GetData to get policy value." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -GetVar R_Ip6ConfigPolicy
> -if { $R_Ip6ConfigPolicy == $IP6CP(Manual) } {
> - set assert pass
> -} else {
> - set assert fail
> -
> - RecordAssertion $assert $GenericAssertionGuid \
> - "Set manual policy succeeds(event is signaled correctly and data correct)."
> - SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - EndScope _IP6CONFIG_SETDATA_CONF5
> - EndLog
> - return
> -}
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Set manual policy succeeds(event is signaled correctly and data correct)."
> -
> -#
> -# Check Point : Set Manual Address with wrong data size
> -#
> -EFI_IP6_CONFIG_MANUAL_ADDRESS R_Temp_Ip6ConfigManualAddress
> -
> -set L_ManualListLen 1
> -EFI_IP6_CONFIG_MANUAL_ADDRESS R_Ip6ConfigManualAddress
> -set L_UnitLen [Sizeof EFI_IP6_CONFIG_MANUAL_ADDRESS]
> -set L_ListLen [expr {$L_UnitLen * $L_ManualListLen}]
> -SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
> -SetVar R_Ip6ConfigDataSize 16
> -SetVar R_Temp_Ip6ConfigManualAddress.IsAnycast FALSE
> -SetVar R_Temp_Ip6ConfigManualAddress.PrefixLength 64
> -SetIpv6Address R_Temp_Ip6ConfigManualAddress.Address "2002::5000"
> -SetVar R_Ip6ConfigManualAddress @R_Temp_Ip6ConfigManualAddress
> -
> -Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigManualAddress,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_BAD_BUFFER_SIZE]
> -RecordAssertion $assert $Ip6ConfigSetDataConf5AssertionGuid001 \
> - "Ip6Config.SetData - Call SetData to set manual address with wrong data size." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_BAD_BUFFER_SIZE"
> -DelVar R_Ip6ConfigManualAddress
> -
> -#
> -# Check Points : Set Gateway with wrong data size
> -#
> -set L_GatewayListLen 1
> -EFI_IPv6_ADDRESS R_Temp_Ip6ConfigGateway
> -EFI_IPv6_ADDRESS R_Ip6ConfigGateway
> -set L_UnitLen [Sizeof EFI_IPv6_ADDRESS]
> -set L_ListLen [expr {$L_UnitLen * $L_GatewayListLen}]
> -SetVar R_Ip6ConfigDataType $IP6CDT(Gateway)
> -SetVar R_Ip6ConfigDataSize 8
> -
> -SetIpv6Address R_Temp_Ip6ConfigGateway "2002::5001"
> -SetVar R_Ip6ConfigGateway @R_Temp_Ip6ConfigGateway
> -Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigGateway,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_BAD_BUFFER_SIZE]
> -RecordAssertion $assert $Ip6ConfigSetDataConf5AssertionGuid002 \
> - "Ip6Config.SetData - Call SetData to set gateway with wrong data size." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_BAD_BUFFER_SIZE"
> -
> -DelVar R_Ip6ConfigGateway
> -
> -#
> -# Check Point : Set Dns Server with wrong data size
> -#
> -set L_DnsServerListLen 1
> -EFI_IPv6_ADDRESS R_Temp_Ip6ConfigDnsServer
> -EFI_IPv6_ADDRESS R_Ip6ConfigDnsServer
> -set L_UnitLen [Sizeof EFI_IPv6_ADDRESS]
> -set L_ListLen [expr {$L_UnitLen * $L_DnsServerListLen}]
> -SetVar R_Ip6ConfigDataType $IP6CDT(DnsServer)
> -SetVar R_Ip6ConfigDataSize 8
> -
> -SetIpv6Address R_Temp_Ip6ConfigDnsServer "2002::5002"
> -SetVar R_Ip6ConfigDnsServer @R_Temp_Ip6ConfigDnsServer
> -
> -Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigDnsServer,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_BAD_BUFFER_SIZE]
> -RecordAssertion $assert $Ip6ConfigSetDataConf5AssertionGuid003 \
> - "Ip6Config.SetData - Call SetData to set dns server with wrong data size." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_BAD_BUFFER_SIZE"
> -
> -DelVar R_Ip6ConfigDnsServer
> -
> -#
> -# Check Point : Set Altlfld with wrong data size
> -#
> -SetVar R_Ip6ConfigDataType $IP6CDT(AltInterfaceId)
> -SetVar R_Ip6ConfigDataSize 1
> -
> -Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigInterfaceId,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_BAD_BUFFER_SIZE]
> -RecordAssertion $assert $Ip6ConfigSetDataConf5AssertionGuid004 \
> - "Ip6Config.SetData - Call SetData to set Altlfld with wrong data size." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_BAD_BUFFER_SIZE"
> -
> -#
> -# Check Point : Set DadXmits with wrong data size
> -#
> -SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> -SetVar R_Ip6ConfigDataSize 1
> -SetVar R_Ip6ConfigDadTransmits.DupAddrDetectTransmits 3
> -
> -Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigDadTransmits,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_BAD_BUFFER_SIZE]
> -RecordAssertion $assert $Ip6ConfigSetDataConf5AssertionGuid005 \
> - "Ip6Config.SetData - Call SetData to set DadXmits with wrong data size." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_BAD_BUFFER_SIZE"
> -
> -#
> -# Check Point : Set Policy with wrong data size
> -#
> -SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> -SetVar R_Ip6ConfigDataSize 1
> -SetVar R_Ip6ConfigPolicy $IP6CP(Manual)
> -
> -Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_BAD_BUFFER_SIZE]
> -RecordAssertion $assert $Ip6ConfigSetDataConf5AssertionGuid006 \
> - "Ip6Config.SetData - Call SetData to set Policy with wrong data size." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_BAD_BUFFER_SIZE"
> -
> -#
> -# Clean up
> -#
> -SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> -Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.UnregisterDataNotify - Unregister notification event for configuration." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -BS->CloseEvent {@R_DoneEvent,&@R_Status}
> -GetAck
> -
> -EndScope _IP6CONFIG_SETDATA_CONF5
> -
> +#
> +# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
> +# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
> +#
> +# This program and the accompanying materials
> +# are licensed and made available under the terms and conditions of the BSD License
> +# which accompanies this distribution. The full text of the license may be found at
> +# http://opensource.org/licenses/bsd-license.php
> +#
> +# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> +# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
> +#
> +################################################################################
> +CaseLevel CONFORMANCE
> +CaseAttribute AUTO
> +CaseVerboseLevel DEFAULT
> +set reportfile report.csv
> +
> +#
> +# test case Name, category, description, GUID...
> +#
> +CaseGuid 1F1728C3-BB62-4f28-9D75-6E631F7A6833
> +CaseName SetData.Conf5.Case1
> +CaseCategory IP6Config
> +CaseDescription {SetData must not succeed when data size does not match the data type.}
> +
> +################################################################################
> +Include IP6Config/Include/Ip6Config.inc.tcl
> +
> +
> +#
> +# Begin log ...
> +#
> +BeginLog
> +
> +#
> +# BeginScope
> +#
> +BeginScope _IP6CONFIG_SETDATA_CONF5
> +
> +#
> +# Parameter Definition
> +# R_ represents "Remote EFI Side Parameter"
> +# L_ represents "Local ENTS Side Parameter"
> +#
> +UINTN R_Status
> +UINTN R_Context
> +UINTN R_DoneEvent
> +UINTN R_Ip6ConfigDataSize
> +UINT32 R_Ip6ConfigDataType
> +EFI_IP6_CONFIG_INTERFACE_INFO R_Ip6ConfigInterfaceInfo
> +EFI_IP6_CONFIG_INTERFACE_ID R_Ip6ConfigInterfaceId
> +UINT32 R_Ip6ConfigPolicy
> +EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS R_Ip6ConfigDadTransmits
> +
> +#
> +# Check Point: Call Ip6Config->SetData to set manual policy
> +#
> +SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> +SetVar R_Ip6ConfigDataSize [Sizeof UINT32]
> +SetVar R_Ip6ConfigPolicy $IP6CP(Manual)
> +
> +SetVar R_Context 0
> +BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context,\
> + &@R_DoneEvent, &@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "BS.CreateEvent." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.RegisterDataNotify - Register notification event for configuration." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_Status"
> +GetAck
> +GetVar R_Status
> +if { $R_Status == $EFI_SUCCESS } {
> + set assert pass
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.SetData - Call SetData to set manual policy." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +} elseif { $R_Status == $EFI_NOT_READY } {
> + set i 0
> + set L_TimeOut 30
> + while { 1 > 0 } {
> + GetVar R_Context
> + if { $R_Context == 1 } {
> + break
> + } elseif { $i == $L_TimeOut } {
> + set assert fail
> + RecordAssertion $assert $GenericAssertionGuid \
> + "SetData failed.(event hasn't been signaled before TIMEOUT)." \
> + "TIMEOUT value is $L_TimeOut (sec), "
> + SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_SETDATA_CONF5
> + EndLog
> + return
> + }
> + incr i
> + Stall 1
> + }
> +} else {
> + set assert fail
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.SetData - Call SetData to set manual policy." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> + SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_SETDATA_CONF5
> + EndLog
> + return
> +}
> +
> +Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.GetData - Call GetData to get policy value." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +GetVar R_Ip6ConfigPolicy
> +if { $R_Ip6ConfigPolicy == $IP6CP(Manual) } {
> + set assert pass
> +} else {
> + set assert fail
> +
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Set manual policy succeeds(event is signaled correctly and data correct)."
> + SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_SETDATA_CONF5
> + EndLog
> + return
> +}
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Set manual policy succeeds(event is signaled correctly and data correct)."
> +
> +#
> +# Check Point : Set Manual Address with wrong data size
> +#
> +EFI_IP6_CONFIG_MANUAL_ADDRESS R_Temp_Ip6ConfigManualAddress
> +
> +set L_ManualListLen 1
> +EFI_IP6_CONFIG_MANUAL_ADDRESS R_Ip6ConfigManualAddress
> +set L_UnitLen [Sizeof EFI_IP6_CONFIG_MANUAL_ADDRESS]
> +set L_ListLen [expr {$L_UnitLen * $L_ManualListLen}]
> +SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
> +SetVar R_Ip6ConfigDataSize 16
> +SetVar R_Temp_Ip6ConfigManualAddress.IsAnycast FALSE
> +SetVar R_Temp_Ip6ConfigManualAddress.PrefixLength 64
> +SetIpv6Address R_Temp_Ip6ConfigManualAddress.Address "2002::5000"
> +SetVar R_Ip6ConfigManualAddress @R_Temp_Ip6ConfigManualAddress
> +
> +Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigManualAddress,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_BAD_BUFFER_SIZE]
> +RecordAssertion $assert $Ip6ConfigSetDataConf5AssertionGuid001 \
> + "Ip6Config.SetData - Call SetData to set manual address with wrong data size." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_BAD_BUFFER_SIZE"
> +DelVar R_Ip6ConfigManualAddress
> +
> +#
> +# Check Points : Set Gateway with wrong data size
> +#
> +set L_GatewayListLen 1
> +EFI_IPv6_ADDRESS R_Temp_Ip6ConfigGateway
> +EFI_IPv6_ADDRESS R_Ip6ConfigGateway
> +set L_UnitLen [Sizeof EFI_IPv6_ADDRESS]
> +set L_ListLen [expr {$L_UnitLen * $L_GatewayListLen}]
> +SetVar R_Ip6ConfigDataType $IP6CDT(Gateway)
> +SetVar R_Ip6ConfigDataSize 8
> +
> +SetIpv6Address R_Temp_Ip6ConfigGateway "2002::5001"
> +SetVar R_Ip6ConfigGateway @R_Temp_Ip6ConfigGateway
> +Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigGateway,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_BAD_BUFFER_SIZE]
> +RecordAssertion $assert $Ip6ConfigSetDataConf5AssertionGuid002 \
> + "Ip6Config.SetData - Call SetData to set gateway with wrong data size." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_BAD_BUFFER_SIZE"
> +
> +DelVar R_Ip6ConfigGateway
> +
> +#
> +# Check Point : Set Dns Server with wrong data size
> +#
> +set L_DnsServerListLen 1
> +EFI_IPv6_ADDRESS R_Temp_Ip6ConfigDnsServer
> +EFI_IPv6_ADDRESS R_Ip6ConfigDnsServer
> +set L_UnitLen [Sizeof EFI_IPv6_ADDRESS]
> +set L_ListLen [expr {$L_UnitLen * $L_DnsServerListLen}]
> +SetVar R_Ip6ConfigDataType $IP6CDT(DnsServer)
> +SetVar R_Ip6ConfigDataSize 8
> +
> +SetIpv6Address R_Temp_Ip6ConfigDnsServer "2002::5002"
> +SetVar R_Ip6ConfigDnsServer @R_Temp_Ip6ConfigDnsServer
> +
> +Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigDnsServer,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_BAD_BUFFER_SIZE]
> +RecordAssertion $assert $Ip6ConfigSetDataConf5AssertionGuid003 \
> + "Ip6Config.SetData - Call SetData to set dns server with wrong data size." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_BAD_BUFFER_SIZE"
> +
> +DelVar R_Ip6ConfigDnsServer
> +
> +#
> +# Check Point : Set Altlfld with wrong data size
> +#
> +SetVar R_Ip6ConfigDataType $IP6CDT(AltInterfaceId)
> +SetVar R_Ip6ConfigDataSize 1
> +
> +Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigInterfaceId,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_BAD_BUFFER_SIZE]
> +RecordAssertion $assert $Ip6ConfigSetDataConf5AssertionGuid004 \
> + "Ip6Config.SetData - Call SetData to set Altlfld with wrong data size." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_BAD_BUFFER_SIZE"
> +
> +#
> +# Check Point : Set DadXmits with wrong data size
> +#
> +SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> +SetVar R_Ip6ConfigDataSize 1
> +SetVar R_Ip6ConfigDadTransmits.DupAddrDetectTransmits 3
> +
> +Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigDadTransmits,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_BAD_BUFFER_SIZE]
> +RecordAssertion $assert $Ip6ConfigSetDataConf5AssertionGuid005 \
> + "Ip6Config.SetData - Call SetData to set DadXmits with wrong data size." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_BAD_BUFFER_SIZE"
> +
> +#
> +# Check Point : Set Policy with wrong data size
> +#
> +SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> +SetVar R_Ip6ConfigDataSize 1
> +SetVar R_Ip6ConfigPolicy $IP6CP(Manual)
> +
> +Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_BAD_BUFFER_SIZE]
> +RecordAssertion $assert $Ip6ConfigSetDataConf5AssertionGuid006 \
> + "Ip6Config.SetData - Call SetData to set Policy with wrong data size." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_BAD_BUFFER_SIZE"
> +
> +#
> +# Clean up
> +#
> +SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> +Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.UnregisterDataNotify - Unregister notification event for configuration." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +BS->CloseEvent {@R_DoneEvent,&@R_Status}
> +GetAck
> +
> +EndScope _IP6CONFIG_SETDATA_CONF5
> +
> EndLog
> \ No newline at end of file
> diff --git a/uefi-sct/EMS/Bin/TestCase/IP6Config/SetData.Conf6.Case1.tcl b/uefi-sct/EMS/Bin/TestCase/IP6Config/SetData.Conf6.Case1.tcl
> index 0430336..0bc8880 100644
> --- a/uefi-sct/EMS/Bin/TestCase/IP6Config/SetData.Conf6.Case1.tcl
> +++ b/uefi-sct/EMS/Bin/TestCase/IP6Config/SetData.Conf6.Case1.tcl
> @@ -1,72 +1,72 @@
> -#
> -# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
> -# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
> -#
> -# This program and the accompanying materials
> -# are licensed and made available under the terms and conditions of the BSD License
> -# which accompanies this distribution. The full text of the license may be found at
> -# http://opensource.org/licenses/bsd-license.php
> -#
> -# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> -# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
> -#
> -################################################################################
> -CaseLevel CONFORMANCE
> -CaseAttribute AUTO
> -CaseVerboseLevel DEFAULT
> -set reportfile report.csv
> -
> -#
> -# test case Name, category, description, GUID...
> -#
> -CaseGuid 6C5FB23E-96A5-475a-8B7E-24B9BBB99C2A
> -CaseName SetData.Conf6.Case1
> -CaseCategory IP6Config
> -CaseDescription {SetData must not succeed when data type is not supported.}
> -
> -################################################################################
> -Include IP6Config/Include/Ip6Config.inc.tcl
> -
> -
> -#
> -# Begin log ...
> -#
> -BeginLog
> -
> -#
> -# BeginScope
> -#
> -BeginScope _IP6CONFIG_SETDATA_CONF6
> -
> -#
> -# Parameter Definition
> -# R_ represents "Remote EFI Side Parameter"
> -# L_ represents "Local ENTS Side Parameter"
> -#
> -UINTN R_Status
> -UINTN R_Context
> -UINTN R_DoneEvent
> -UINTN R_Ip6ConfigDataSize
> -UINT32 R_Ip6ConfigDataType
> -EFI_IP6_CONFIG_INTERFACE_INFO R_Ip6ConfigInterfaceInfo
> -EFI_IP6_CONFIG_INTERFACE_ID R_Ip6ConfigInterfaceId
> -UINT32 R_Ip6ConfigPolicy
> -EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS R_Ip6ConfigDadTransmits
> -EFI_IP6_CONFIG_MANUAL_ADDRESS R_Ip6ConfigManualAddress
> -UINT32 R_Ip6ConfigMaximum
> -#
> -# Check Point: Call Ip6Config->SetData when data type is not supported.
> -#
> -SetVar R_Ip6ConfigDataType $IP6CDT(Maximum)
> -SetVar R_Ip6ConfigDataSize [Sizeof UINT32]
> -
> -Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigMaximum,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_UNSUPPORTED]
> -RecordAssertion $assert $Ip6ConfigSetDataConf6AssertionGuid001 \
> - "Ip6Config.SetData - Call SetData with the data type not supported." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_UNSUPPORTED"
> -
> -EndScope _IP6CONFIG_SETDATA_CONF6
> -
> +#
> +# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
> +# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
> +#
> +# This program and the accompanying materials
> +# are licensed and made available under the terms and conditions of the BSD License
> +# which accompanies this distribution. The full text of the license may be found at
> +# http://opensource.org/licenses/bsd-license.php
> +#
> +# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> +# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
> +#
> +################################################################################
> +CaseLevel CONFORMANCE
> +CaseAttribute AUTO
> +CaseVerboseLevel DEFAULT
> +set reportfile report.csv
> +
> +#
> +# test case Name, category, description, GUID...
> +#
> +CaseGuid 6C5FB23E-96A5-475a-8B7E-24B9BBB99C2A
> +CaseName SetData.Conf6.Case1
> +CaseCategory IP6Config
> +CaseDescription {SetData must not succeed when data type is not supported.}
> +
> +################################################################################
> +Include IP6Config/Include/Ip6Config.inc.tcl
> +
> +
> +#
> +# Begin log ...
> +#
> +BeginLog
> +
> +#
> +# BeginScope
> +#
> +BeginScope _IP6CONFIG_SETDATA_CONF6
> +
> +#
> +# Parameter Definition
> +# R_ represents "Remote EFI Side Parameter"
> +# L_ represents "Local ENTS Side Parameter"
> +#
> +UINTN R_Status
> +UINTN R_Context
> +UINTN R_DoneEvent
> +UINTN R_Ip6ConfigDataSize
> +UINT32 R_Ip6ConfigDataType
> +EFI_IP6_CONFIG_INTERFACE_INFO R_Ip6ConfigInterfaceInfo
> +EFI_IP6_CONFIG_INTERFACE_ID R_Ip6ConfigInterfaceId
> +UINT32 R_Ip6ConfigPolicy
> +EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS R_Ip6ConfigDadTransmits
> +EFI_IP6_CONFIG_MANUAL_ADDRESS R_Ip6ConfigManualAddress
> +UINT32 R_Ip6ConfigMaximum
> +#
> +# Check Point: Call Ip6Config->SetData when data type is not supported.
> +#
> +SetVar R_Ip6ConfigDataType $IP6CDT(Maximum)
> +SetVar R_Ip6ConfigDataSize [Sizeof UINT32]
> +
> +Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigMaximum,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_UNSUPPORTED]
> +RecordAssertion $assert $Ip6ConfigSetDataConf6AssertionGuid001 \
> + "Ip6Config.SetData - Call SetData with the data type not supported." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_UNSUPPORTED"
> +
> +EndScope _IP6CONFIG_SETDATA_CONF6
> +
> EndLog
> \ No newline at end of file
> diff --git a/uefi-sct/EMS/Bin/TestCase/IP6Config/SetData.Conf7.Case1.tcl b/uefi-sct/EMS/Bin/TestCase/IP6Config/SetData.Conf7.Case1.tcl
> index 15e118b..22b5676 100644
> --- a/uefi-sct/EMS/Bin/TestCase/IP6Config/SetData.Conf7.Case1.tcl
> +++ b/uefi-sct/EMS/Bin/TestCase/IP6Config/SetData.Conf7.Case1.tcl
> @@ -1,510 +1,510 @@
> -#
> -# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
> -# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
> -#
> -# This program and the accompanying materials
> -# are licensed and made available under the terms and conditions of the BSD License
> -# which accompanies this distribution. The full text of the license may be found at
> -# http://opensource.org/licenses/bsd-license.php
> -#
> -# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> -# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
> -#
> -################################################################################
> -CaseLevel CONFORMANCE
> -CaseAttribute AUTO
> -CaseVerboseLevel DEFAULT
> -set reportfile report.csv
> -
> -#
> -# test case Name, category, description, GUID...
> -#
> -CaseGuid 477D07AC-6FEB-460b-BA92-A98245862D09
> -CaseName SetData.Conf7.Case1
> -CaseCategory IP6Config
> -CaseDescription {SetData must not succeed when the last asynchronous process for the data type has not been finished yet.}
> -
> -################################################################################
> -Include IP6Config/Include/Ip6Config.inc.tcl
> -
> -
> -#
> -# Begin log ...
> -#
> -BeginLog
> -
> -#
> -# BeginScope
> -#
> -BeginScope _IP6CONFIG_SETDATA_CONF7
> -
> -#
> -# Parameter Definition
> -# R_ represents "Remote EFI Side Parameter"
> -# L_ represents "Local ENTS Side Parameter"
> -#
> -UINTN R_Status
> -UINTN R_Context
> -UINTN R_DoneEvent
> -UINTN R_Context1
> -UINTN R_DoneEvent1
> -UINTN R_Ip6ConfigDataSize
> -UINT32 R_Ip6ConfigDataType
> -EFI_IP6_CONFIG_INTERFACE_INFO R_Ip6ConfigInterfaceInfo
> -EFI_IP6_CONFIG_INTERFACE_ID R_Ip6ConfigInterfaceId
> -UINT32 R_Ip6ConfigPolicy
> -EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS R_Ip6ConfigDadTransmits
> -
> -#
> -# Check Point: Call Ip6Config->SetData to set manual policy
> -#
> -SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> -SetVar R_Ip6ConfigDataSize [Sizeof UINT32]
> -SetVar R_Ip6ConfigPolicy $IP6CP(Manual)
> -
> -SetVar R_Context 0
> -BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context,\
> - &@R_DoneEvent, &@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "BS.CreateEvent." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.RegisterDataNotify - Register notification event for configuration." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_Status"
> -GetAck
> -GetVar R_Status
> -if { $R_Status == $EFI_SUCCESS } {
> - set assert pass
> - RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.SetData - Call SetData to set manual policy." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -} elseif { $R_Status == $EFI_NOT_READY } {
> - set i 0
> - set L_TimeOut 30
> - while { 1 > 0 } {
> - GetVar R_Context
> - if { $R_Context == 1 } {
> - break
> - } elseif { $i == $L_TimeOut } {
> - set assert fail
> - RecordAssertion $assert $GenericAssertionGuid \
> - "SetData failed.(event hasn't been signaled before TIMEOUT)." \
> - "TIMEOUT value is $L_TimeOut (sec), "
> -
> - SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - EndScope _IP6CONFIG_SETDATA_CONF7
> - EndLog
> - return
> - }
> - incr i
> - Stall 1
> - }
> -} else {
> - set assert fail
> - RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.SetData - Call SetData to set manual policy." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> - SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - EndScope _IP6CONFIG_SETDATA_CONF7
> - EndLog
> - return
> -}
> -
> -Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.GetData - Call GetData to get policy value." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -GetVar R_Ip6ConfigPolicy
> -if { $R_Ip6ConfigPolicy == $IP6CP(Manual) } {
> - set assert pass
> -} else {
> - set assert fail
> -
> - RecordAssertion $assert $GenericAssertionGuid \
> - "Set manual policy succeeds(event is signaled correctly and data correct)."
> - SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - EndScope _IP6CONFIG_SETDATA_CONF7
> - EndLog
> - return
> -}
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Set manual policy succeeds(event is signaled correctly and data correct)."
> -
> -#
> -# Check Point: Call Ip6Config->SetData to set DadXmits 20
> -#
> -SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> -SetVar R_Ip6ConfigDataSize [Sizeof EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS]
> -SetVar R_Ip6ConfigDadTransmits.DupAddrDetectTransmits 20
> -
> -SetVar R_Context1 0
> -BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context1,\
> - &@R_DoneEvent1, &@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "BS.CreateEvent." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.RegisterDataNotify - Register notification event for configuration." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigDadTransmits,&@R_Status"
> -GetAck
> -GetVar R_Status
> -if { $R_Status == $EFI_SUCCESS } {
> - set assert pass
> - RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.SetData - Call SetData to set DadXmits 20." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -} elseif { $R_Status == $EFI_NOT_READY } {
> - set i 0
> - set L_TimeOut 30
> - while { 1 > 0 } {
> - GetVar R_Context1
> - if { $R_Context1 == 1 } {
> - break
> - } elseif { $i == $L_TimeOut } {
> - set assert fail
> - RecordAssertion $assert $GenericAssertionGuid \
> - "SetData failed.(event hasn't been signaled before TIMEOUT)." \
> - "TIMEOUT value is $L_TimeOut (sec), "
> -
> - SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> - GetAck
> - EndScope _IP6CONFIG_SETDATA_CONF7
> - EndLog
> - return
> - }
> - incr i
> - Stall 1
> - }
> -} else {
> - set assert fail
> - RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.SetData - Call SetData to set DadXmits 20." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> - SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> - GetAck
> - EndScope _IP6CONFIG_SETDATA_CONF7
> - EndLog
> - return
> -}
> -
> -Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigDadTransmits,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.GetData - Call GetData to get DadXmits value." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -GetVar R_Ip6ConfigDadTransmits.DupAddrDetectTransmits
> -if { ${R_Ip6ConfigDadTransmits.DupAddrDetectTransmits} == 20 } {
> - set assert pass
> -} else {
> - set assert fail
> -
> - RecordAssertion $assert $GenericAssertionGuid \
> - "Set DadXmits succeeds(event is signaled correctly and data correct)."
> - SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> - GetAck
> - EndScope _IP6CONFIG_SETDATA_CONF7
> - EndLog
> - return
> -}
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Set DadXmits succeeds(event is signaled correctly and data correct)."
> -
> -#
> -# Check Point : Set Manual Address with valid parameter
> -#
> -EFI_IP6_CONFIG_MANUAL_ADDRESS R_Temp_Ip6ConfigManualAddress
> -
> -set L_ManualListLen 1
> -EFI_IP6_CONFIG_MANUAL_ADDRESS R_Ip6ConfigManualAddress
> -set L_UnitLen [Sizeof EFI_IP6_CONFIG_MANUAL_ADDRESS]
> -set L_ListLen [expr {$L_UnitLen * $L_ManualListLen}]
> -SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
> -SetVar R_Ip6ConfigDataSize $L_ListLen
> -SetVar R_Temp_Ip6ConfigManualAddress.IsAnycast FALSE
> -SetVar R_Temp_Ip6ConfigManualAddress.PrefixLength 64
> -SetIpv6Address R_Temp_Ip6ConfigManualAddress.Address "2002::5000"
> -SetVar R_Ip6ConfigManualAddress @R_Temp_Ip6ConfigManualAddress
> -
> -Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigManualAddress,&@R_Status"
> -GetAck
> -GetVar R_Status
> -if { $R_Status == $EFI_NOT_READY } {
> - set assert pass
> -} else {
> - set assert fail
> -
> - RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.SetData - Call SetData to set manual address with valid parameter." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_NOT_READY"
> - SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> - GetAck
> - EndScope _IP6CONFIG_SETDATA_CONF7
> - EndLog
> - return
> -}
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.SetData - Call SetData to set manual address with valid parameter." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_NOT_READY"
> -
> -DelVar R_Ip6ConfigManualAddress
> -
> -#
> -# Check Point : Set Manual Address with valid parameter before the former setting finishes
> -#
> -set L_ManualListLen 1
> -EFI_IP6_CONFIG_MANUAL_ADDRESS R_Ip6ConfigManualAddress
> -set L_UnitLen [Sizeof EFI_IP6_CONFIG_MANUAL_ADDRESS]
> -set L_ListLen [expr {$L_UnitLen * $L_ManualListLen}]
> -SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
> -SetVar R_Ip6ConfigDataSize $L_ListLen
> -SetVar R_Temp_Ip6ConfigManualAddress.IsAnycast FALSE
> -SetVar R_Temp_Ip6ConfigManualAddress.PrefixLength 64
> -SetIpv6Address R_Temp_Ip6ConfigManualAddress.Address "2002::5001"
> -SetVar R_Ip6ConfigManualAddress @R_Temp_Ip6ConfigManualAddress
> -
> -Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigManualAddress,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_ACCESS_DENIED]
> -RecordAssertion $assert $Ip6ConfigSetDataConf7AssertionGuid001 \
> - "Ip6Config.SetData - Call SetData to set manual address with valid parameter before the former setting finishes." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_ACCESS_DENIED"
> -
> -
> -#
> -# Make sure the former configurations succeeds
> -# (Eliminate the side-effect to other cases)
> -#
> -set i 0
> -set L_TimeOut 30
> -Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigManualAddress,&@R_Status"
> -GetAck
> -GetVar R_Status
> -set assert pass
> -while { $R_Status == $EFI_NOT_READY } {
> - Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigManualAddress,&@R_Status"
> - GetAck
> - GetVar R_Status
> - if { $R_Status == $EFI_SUCCESS } {
> - break
> - } elseif { $i == $L_TimeOut } {
> - set assert fail
> -
> - RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.SetData - former SetData finishes." \
> - "TimeUsed - $i, TimeOut Value- $L_TimeOut"
> - SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> - GetAck
> - EndScope _IP6CONFIG_SETDATA_CONF7
> - EndLog
> - return
> - }
> - incr i
> - Stall 1
> -}
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.SetData - former SetData finishes." \
> - "TimeUsed - $i, TimeOut Value- $L_TimeOut"
> -
> -#
> -# Set automatic policy (this will clean up all address information configured)
> -#
> -SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> -SetVar R_Ip6ConfigDataSize [Sizeof UINT32]
> -SetVar R_Ip6ConfigPolicy $IP6CP(Automatic)
> -
> -SetVar R_Context 0
> -
> -Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_Status"
> -GetAck
> -GetVar R_Status
> -if { $R_Status == $EFI_SUCCESS } {
> - set assert pass
> -} elseif { $R_Status == $EFI_NOT_READY } {
> - set i 0
> - set L_TimeOut 30
> - set assert pass
> - while { 1 > 0 } {
> - GetVar R_Context
> - if { $R_Context == 1 } {
> - break
> - } elseif { $i == $L_TimeOut } {
> - set assert fail
> -
> - RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.SetData - Set automatic policy to clean up the former configuration." \
> - "TimeUsed - $i, TimeOut Value- $L_TimeOut"
> - SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> - GetAck
> -
> - EndScope _IP6CONFIG_SETDATA_CONF7
> - EndLog
> - return
> - }
> - incr i
> - Stall 1
> - }
> -} else {
> - set assert fail
> -
> - RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.SetData - Set automatic policy to clean up the former configuration." \
> - "TimeUsed - $i, TimeOut Value- $L_TimeOut"
> - SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> - GetAck
> -
> - EndScope _IP6CONFIG_SETDATA_CONF7
> - EndLog
> - return
> -}
> -
> -Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_Status"
> -GetAck
> -GetVar R_Ip6ConfigPolicy
> -if { $R_Ip6ConfigPolicy == $IP6CP(Automatic) } {
> - set assert pass
> -} else {
> - set assert fail
> -
> - RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.SetData - Set automatic policy to clean up the former configuration." \
> - "TimeUsed - $i, TimeOut Value- $L_TimeOut"
> - SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> - GetAck
> -
> - EndScope _IP6CONFIG_SETDATA_CONF7
> - EndLog
> -
> - return
> -}
> -
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.SetData - Set automatic policy to clean up the former configuration." \
> - "TimeUsed - $i, TimeOut Value- $L_TimeOut"
> -
> -
> -#
> -# Clean up
> -#
> -SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> -Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.UnregisterDataNotify - Unregister notification event for configuration." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -BS->CloseEvent {@R_DoneEvent,&@R_Status}
> -GetAck
> -
> -SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> -Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.UnregisterDataNotify - Unregister notification event for configuration." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> -GetAck
> -
> -EndScope _IP6CONFIG_SETDATA_CONF7
> -
> -EndLog
> -
> +#
> +# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
> +# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
> +#
> +# This program and the accompanying materials
> +# are licensed and made available under the terms and conditions of the BSD License
> +# which accompanies this distribution. The full text of the license may be found at
> +# http://opensource.org/licenses/bsd-license.php
> +#
> +# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> +# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
> +#
> +################################################################################
> +CaseLevel CONFORMANCE
> +CaseAttribute AUTO
> +CaseVerboseLevel DEFAULT
> +set reportfile report.csv
> +
> +#
> +# test case Name, category, description, GUID...
> +#
> +CaseGuid 477D07AC-6FEB-460b-BA92-A98245862D09
> +CaseName SetData.Conf7.Case1
> +CaseCategory IP6Config
> +CaseDescription {SetData must not succeed when the last asynchronous process for the data type has not been finished yet.}
> +
> +################################################################################
> +Include IP6Config/Include/Ip6Config.inc.tcl
> +
> +
> +#
> +# Begin log ...
> +#
> +BeginLog
> +
> +#
> +# BeginScope
> +#
> +BeginScope _IP6CONFIG_SETDATA_CONF7
> +
> +#
> +# Parameter Definition
> +# R_ represents "Remote EFI Side Parameter"
> +# L_ represents "Local ENTS Side Parameter"
> +#
> +UINTN R_Status
> +UINTN R_Context
> +UINTN R_DoneEvent
> +UINTN R_Context1
> +UINTN R_DoneEvent1
> +UINTN R_Ip6ConfigDataSize
> +UINT32 R_Ip6ConfigDataType
> +EFI_IP6_CONFIG_INTERFACE_INFO R_Ip6ConfigInterfaceInfo
> +EFI_IP6_CONFIG_INTERFACE_ID R_Ip6ConfigInterfaceId
> +UINT32 R_Ip6ConfigPolicy
> +EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS R_Ip6ConfigDadTransmits
> +
> +#
> +# Check Point: Call Ip6Config->SetData to set manual policy
> +#
> +SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> +SetVar R_Ip6ConfigDataSize [Sizeof UINT32]
> +SetVar R_Ip6ConfigPolicy $IP6CP(Manual)
> +
> +SetVar R_Context 0
> +BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context,\
> + &@R_DoneEvent, &@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "BS.CreateEvent." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.RegisterDataNotify - Register notification event for configuration." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_Status"
> +GetAck
> +GetVar R_Status
> +if { $R_Status == $EFI_SUCCESS } {
> + set assert pass
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.SetData - Call SetData to set manual policy." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +} elseif { $R_Status == $EFI_NOT_READY } {
> + set i 0
> + set L_TimeOut 30
> + while { 1 > 0 } {
> + GetVar R_Context
> + if { $R_Context == 1 } {
> + break
> + } elseif { $i == $L_TimeOut } {
> + set assert fail
> + RecordAssertion $assert $GenericAssertionGuid \
> + "SetData failed.(event hasn't been signaled before TIMEOUT)." \
> + "TIMEOUT value is $L_TimeOut (sec), "
> +
> + SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_SETDATA_CONF7
> + EndLog
> + return
> + }
> + incr i
> + Stall 1
> + }
> +} else {
> + set assert fail
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.SetData - Call SetData to set manual policy." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> + SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_SETDATA_CONF7
> + EndLog
> + return
> +}
> +
> +Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.GetData - Call GetData to get policy value." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +GetVar R_Ip6ConfigPolicy
> +if { $R_Ip6ConfigPolicy == $IP6CP(Manual) } {
> + set assert pass
> +} else {
> + set assert fail
> +
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Set manual policy succeeds(event is signaled correctly and data correct)."
> + SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_SETDATA_CONF7
> + EndLog
> + return
> +}
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Set manual policy succeeds(event is signaled correctly and data correct)."
> +
> +#
> +# Check Point: Call Ip6Config->SetData to set DadXmits 20
> +#
> +SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> +SetVar R_Ip6ConfigDataSize [Sizeof EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS]
> +SetVar R_Ip6ConfigDadTransmits.DupAddrDetectTransmits 20
> +
> +SetVar R_Context1 0
> +BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context1,\
> + &@R_DoneEvent1, &@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "BS.CreateEvent." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.RegisterDataNotify - Register notification event for configuration." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigDadTransmits,&@R_Status"
> +GetAck
> +GetVar R_Status
> +if { $R_Status == $EFI_SUCCESS } {
> + set assert pass
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.SetData - Call SetData to set DadXmits 20." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +} elseif { $R_Status == $EFI_NOT_READY } {
> + set i 0
> + set L_TimeOut 30
> + while { 1 > 0 } {
> + GetVar R_Context1
> + if { $R_Context1 == 1 } {
> + break
> + } elseif { $i == $L_TimeOut } {
> + set assert fail
> + RecordAssertion $assert $GenericAssertionGuid \
> + "SetData failed.(event hasn't been signaled before TIMEOUT)." \
> + "TIMEOUT value is $L_TimeOut (sec), "
> +
> + SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_SETDATA_CONF7
> + EndLog
> + return
> + }
> + incr i
> + Stall 1
> + }
> +} else {
> + set assert fail
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.SetData - Call SetData to set DadXmits 20." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> + SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_SETDATA_CONF7
> + EndLog
> + return
> +}
> +
> +Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigDadTransmits,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.GetData - Call GetData to get DadXmits value." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +GetVar R_Ip6ConfigDadTransmits.DupAddrDetectTransmits
> +if { ${R_Ip6ConfigDadTransmits.DupAddrDetectTransmits} == 20 } {
> + set assert pass
> +} else {
> + set assert fail
> +
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Set DadXmits succeeds(event is signaled correctly and data correct)."
> + SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_SETDATA_CONF7
> + EndLog
> + return
> +}
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Set DadXmits succeeds(event is signaled correctly and data correct)."
> +
> +#
> +# Check Point : Set Manual Address with valid parameter
> +#
> +EFI_IP6_CONFIG_MANUAL_ADDRESS R_Temp_Ip6ConfigManualAddress
> +
> +set L_ManualListLen 1
> +EFI_IP6_CONFIG_MANUAL_ADDRESS R_Ip6ConfigManualAddress
> +set L_UnitLen [Sizeof EFI_IP6_CONFIG_MANUAL_ADDRESS]
> +set L_ListLen [expr {$L_UnitLen * $L_ManualListLen}]
> +SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
> +SetVar R_Ip6ConfigDataSize $L_ListLen
> +SetVar R_Temp_Ip6ConfigManualAddress.IsAnycast FALSE
> +SetVar R_Temp_Ip6ConfigManualAddress.PrefixLength 64
> +SetIpv6Address R_Temp_Ip6ConfigManualAddress.Address "2002::5000"
> +SetVar R_Ip6ConfigManualAddress @R_Temp_Ip6ConfigManualAddress
> +
> +Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigManualAddress,&@R_Status"
> +GetAck
> +GetVar R_Status
> +if { $R_Status == $EFI_NOT_READY } {
> + set assert pass
> +} else {
> + set assert fail
> +
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.SetData - Call SetData to set manual address with valid parameter." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_NOT_READY"
> + SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_SETDATA_CONF7
> + EndLog
> + return
> +}
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.SetData - Call SetData to set manual address with valid parameter." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_NOT_READY"
> +
> +DelVar R_Ip6ConfigManualAddress
> +
> +#
> +# Check Point : Set Manual Address with valid parameter before the former setting finishes
> +#
> +set L_ManualListLen 1
> +EFI_IP6_CONFIG_MANUAL_ADDRESS R_Ip6ConfigManualAddress
> +set L_UnitLen [Sizeof EFI_IP6_CONFIG_MANUAL_ADDRESS]
> +set L_ListLen [expr {$L_UnitLen * $L_ManualListLen}]
> +SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
> +SetVar R_Ip6ConfigDataSize $L_ListLen
> +SetVar R_Temp_Ip6ConfigManualAddress.IsAnycast FALSE
> +SetVar R_Temp_Ip6ConfigManualAddress.PrefixLength 64
> +SetIpv6Address R_Temp_Ip6ConfigManualAddress.Address "2002::5001"
> +SetVar R_Ip6ConfigManualAddress @R_Temp_Ip6ConfigManualAddress
> +
> +Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigManualAddress,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_ACCESS_DENIED]
> +RecordAssertion $assert $Ip6ConfigSetDataConf7AssertionGuid001 \
> + "Ip6Config.SetData - Call SetData to set manual address with valid parameter before the former setting finishes." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_ACCESS_DENIED"
> +
> +
> +#
> +# Make sure the former configurations succeeds
> +# (Eliminate the side-effect to other cases)
> +#
> +set i 0
> +set L_TimeOut 30
> +Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigManualAddress,&@R_Status"
> +GetAck
> +GetVar R_Status
> +set assert pass
> +while { $R_Status == $EFI_NOT_READY } {
> + Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigManualAddress,&@R_Status"
> + GetAck
> + GetVar R_Status
> + if { $R_Status == $EFI_SUCCESS } {
> + break
> + } elseif { $i == $L_TimeOut } {
> + set assert fail
> +
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.SetData - former SetData finishes." \
> + "TimeUsed - $i, TimeOut Value- $L_TimeOut"
> + SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_SETDATA_CONF7
> + EndLog
> + return
> + }
> + incr i
> + Stall 1
> +}
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.SetData - former SetData finishes." \
> + "TimeUsed - $i, TimeOut Value- $L_TimeOut"
> +
> +#
> +# Set automatic policy (this will clean up all address information configured)
> +#
> +SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> +SetVar R_Ip6ConfigDataSize [Sizeof UINT32]
> +SetVar R_Ip6ConfigPolicy $IP6CP(Automatic)
> +
> +SetVar R_Context 0
> +
> +Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_Status"
> +GetAck
> +GetVar R_Status
> +if { $R_Status == $EFI_SUCCESS } {
> + set assert pass
> +} elseif { $R_Status == $EFI_NOT_READY } {
> + set i 0
> + set L_TimeOut 30
> + set assert pass
> + while { 1 > 0 } {
> + GetVar R_Context
> + if { $R_Context == 1 } {
> + break
> + } elseif { $i == $L_TimeOut } {
> + set assert fail
> +
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.SetData - Set automatic policy to clean up the former configuration." \
> + "TimeUsed - $i, TimeOut Value- $L_TimeOut"
> + SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> + GetAck
> +
> + EndScope _IP6CONFIG_SETDATA_CONF7
> + EndLog
> + return
> + }
> + incr i
> + Stall 1
> + }
> +} else {
> + set assert fail
> +
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.SetData - Set automatic policy to clean up the former configuration." \
> + "TimeUsed - $i, TimeOut Value- $L_TimeOut"
> + SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> + GetAck
> +
> + EndScope _IP6CONFIG_SETDATA_CONF7
> + EndLog
> + return
> +}
> +
> +Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_Status"
> +GetAck
> +GetVar R_Ip6ConfigPolicy
> +if { $R_Ip6ConfigPolicy == $IP6CP(Automatic) } {
> + set assert pass
> +} else {
> + set assert fail
> +
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.SetData - Set automatic policy to clean up the former configuration." \
> + "TimeUsed - $i, TimeOut Value- $L_TimeOut"
> + SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> + GetAck
> +
> + EndScope _IP6CONFIG_SETDATA_CONF7
> + EndLog
> +
> + return
> +}
> +
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.SetData - Set automatic policy to clean up the former configuration." \
> + "TimeUsed - $i, TimeOut Value- $L_TimeOut"
> +
> +
> +#
> +# Clean up
> +#
> +SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> +Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.UnregisterDataNotify - Unregister notification event for configuration." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +BS->CloseEvent {@R_DoneEvent,&@R_Status}
> +GetAck
> +
> +SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> +Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.UnregisterDataNotify - Unregister notification event for configuration." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> +GetAck
> +
> +EndScope _IP6CONFIG_SETDATA_CONF7
> +
> +EndLog
> +
> diff --git a/uefi-sct/EMS/Bin/TestCase/IP6Config/SetData.Func1.Case1.tcl b/uefi-sct/EMS/Bin/TestCase/IP6Config/SetData.Func1.Case1.tcl
> index 2053775..d35f104 100644
> --- a/uefi-sct/EMS/Bin/TestCase/IP6Config/SetData.Func1.Case1.tcl
> +++ b/uefi-sct/EMS/Bin/TestCase/IP6Config/SetData.Func1.Case1.tcl
> @@ -1,274 +1,274 @@
> -#
> -# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
> -# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
> -#
> -# This program and the accompanying materials
> -# are licensed and made available under the terms and conditions of the BSD License
> -# which accompanies this distribution. The full text of the license may be found at
> -# http://opensource.org/licenses/bsd-license.php
> -#
> -# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> -# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
> -#
> -################################################################################
> -CaseLevel FUNCTION
> -CaseAttribute AUTO
> -CaseVerboseLevel DEFAULT
> -set reportfile report.csv
> -
> -#
> -# test case Name, category, description, GUID...
> -#
> -CaseGuid EF8FF5B4-8855-4fbd-87C5-C28C7312302A
> -CaseName SetData.Func1.Case1
> -CaseCategory IP6Config
> -CaseDescription {SetData must succeed with valid parameters.}
> -
> -################################################################################
> -Include IP6Config/Include/Ip6Config.inc.tcl
> -
> -
> -#
> -# Begin log ...
> -#
> -BeginLog
> -
> -#
> -# BeginScope
> -#
> -BeginScope _IP6CONFIG_SETDATA_FUNC1
> -
> -#
> -# Parameter Definition
> -# R_ represents "Remote EFI Side Parameter"
> -# L_ represents "Local ENTS Side Parameter"
> -#
> -UINTN R_Status
> -UINTN R_Context
> -UINTN R_Context1
> -UINTN R_DoneEvent
> -UINTN R_DoneEvent1
> -UINTN R_Ip6ConfigDataSize
> -UINT32 R_Ip6ConfigDataType
> -EFI_IP6_CONFIG_INTERFACE_INFO R_Ip6ConfigInterfaceInfo
> -EFI_IP6_CONFIG_INTERFACE_ID R_Ip6ConfigInterfaceId
> -UINT32 R_Ip6ConfigPolicy
> -EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS R_Ip6ConfigDadTransmits
> -
> -#
> -# Check Point: Call Ip6Config->SetData to set AltInterfaceId
> -#
> -SetVar R_Ip6ConfigDataType $IP6CDT(AltInterfaceId)
> -SetVar R_Ip6ConfigDataSize [Sizeof EFI_IP6_CONFIG_INTERFACE_ID]
> -SetVar R_Ip6ConfigInterfaceId.Id(0) 0
> -SetVar R_Ip6ConfigInterfaceId.Id(1) 1
> -SetVar R_Ip6ConfigInterfaceId.Id(2) 2
> -SetVar R_Ip6ConfigInterfaceId.Id(3) 3
> -SetVar R_Ip6ConfigInterfaceId.Id(4) 4
> -SetVar R_Ip6ConfigInterfaceId.Id(5) 5
> -SetVar R_Ip6ConfigInterfaceId.Id(6) 6
> -SetVar R_Ip6ConfigInterfaceId.Id(7) 7
> -
> -SetVar R_Context 0
> -BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context,\
> - &@R_DoneEvent, &@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "BS.CreateEvent." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.RegisterDataNotify - Register notification event for configuration." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigInterfaceId,&@R_Status"
> -GetAck
> -GetVar R_Status
> -if { $R_Status == $EFI_SUCCESS } {
> - set assert pass
> - RecordAssertion $assert $Ip6ConfigSetDataFunc1AssertionGuid001 \
> - "Ip6Config.SetData - Call SetData to set AltInterfaceId." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -} elseif { $R_Status == $EFI_NOT_READY } {
> - set i 0
> - set L_TimeOut 30
> - while { 1 > 0 } {
> - GetVar R_Context
> - if { $R_Context == 1 } {
> - break
> - } elseif { $i == $L_TimeOut } {
> - set assert fail
> - RecordAssertion $assert $Ip6ConfigSetDataFunc1AssertionGuid001 \
> - "SetData failed.(event hasn't been signaled before TIMEOUT)." \
> - "TIMEOUT value is $L_TimeOut (sec), "
> -
> - SetVar R_Ip6ConfigDataType $IP6CDT(AltInterfaceId)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - EndScope _IP6CONFIG_SETDATA_FUNC1
> - EndLog
> - return
> - }
> - incr i
> - Stall 1
> - }
> -} else {
> - set assert fail
> - RecordAssertion $assert $Ip6ConfigSetDataFunc1AssertionGuid001 \
> - "Ip6Config.SetData - Call SetData to set AltInterfaceId." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -
> - SetVar R_Ip6ConfigDataType $IP6CDT(AltInterfaceId)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - EndScope _IP6CONFIG_SETDATA_FUNC1
> - EndLog
> - return
> -}
> -
> -Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigInterfaceId,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.GetData - Call GetData to get AltInterfaceId value." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -GetVar R_Ip6ConfigInterfaceId
> -if { ${R_Ip6ConfigInterfaceId.Id(0)} == 0 && ${R_Ip6ConfigInterfaceId.Id(1)} == 1 && ${R_Ip6ConfigInterfaceId.Id(2)} == 2 && ${R_Ip6ConfigInterfaceId.Id(3)} == 3 && ${R_Ip6ConfigInterfaceId.Id(4)} == 4 && ${R_Ip6ConfigInterfaceId.Id(5)} == 5 && ${R_Ip6ConfigInterfaceId.Id(6)} == 6 && ${R_Ip6ConfigInterfaceId.Id(7)} == 7} {
> - set assert pass
> -} else {
> - set assert fail
> -}
> -RecordAssertion $assert $Ip6ConfigSetDataFunc1AssertionGuid002 \
> - "Set AltInterfaceId succeeds(event is signaled correctly and data correct)."
> -
> -#
> -# Check Point: Call Ip6Config->SetData to set DadXmits
> -#
> -SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> -SetVar R_Ip6ConfigDataSize [Sizeof EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS]
> -SetVar R_Ip6ConfigDadTransmits.DupAddrDetectTransmits 3
> -
> -SetVar R_Context1 0
> -BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context1,\
> - &@R_DoneEvent1, &@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "BS.CreateEvent." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.RegisterDataNotify - Register notification event for configuration." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigDadTransmits,&@R_Status"
> -GetAck
> -GetVar R_Status
> -if { $R_Status == $EFI_SUCCESS } {
> - set assert pass
> - RecordAssertion $assert $Ip6ConfigSetDataFunc1AssertionGuid003 \
> - "Ip6Config.SetData - Call SetData to set DadXmits." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -} elseif { $R_Status == $EFI_NOT_READY } {
> - set i 0
> - set L_TimeOut 30
> - while { 1 > 0 } {
> - GetVar R_Context1
> - if { $R_Context1 == 1 } {
> - break
> - } elseif { $i == $L_TimeOut } {
> - set assert fail
> - RecordAssertion $assert $Ip6ConfigSetDataFunc1AssertionGuid003 \
> - "SetData failed.(event hasn't been signaled before TIMEOUT)." \
> - "TIMEOUT value is $L_TimeOut (sec), "
> -
> - SetVar R_Ip6ConfigDataType $IP6CDT(AltInterfaceId)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> - GetAck
> - EndScope _IP6CONFIG_SETDATA_FUNC1
> - EndLog
> - return
> - }
> - incr i
> - Stall 1
> - }
> -} else {
> - set assert fail
> - RecordAssertion $assert $Ip6ConfigSetDataFunc1AssertionGuid003 \
> - "Ip6Config.SetData - Call SetData to set manual DadXmits." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> - SetVar R_Ip6ConfigDataType $IP6CDT(AltInterfaceId)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> - GetAck
> - EndScope _IP6CONFIG_SETDATA_FUNC1
> - EndLog
> -}
> -
> -Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigDadTransmits,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.GetData - Call GetData to get DadXmits value." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -GetVar R_Ip6ConfigDadTransmits
> -if { ${R_Ip6ConfigDadTransmits.DupAddrDetectTransmits} == 3 } {
> - set assert pass
> -} else {
> - set assert fail
> -}
> -RecordAssertion $assert $Ip6ConfigSetDataFunc1AssertionGuid004 \
> - "Set DadXmits succeeds(event is signaled correctly and data correct)."
> -
> -#
> -# Clean up
> -#
> -SetVar R_Ip6ConfigDataType $IP6CDT(AltInterfaceId)
> -Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.UnregisterDataNotify - Unregister notification event for configuration." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -BS->CloseEvent {@R_DoneEvent,&@R_Status}
> -GetAck
> -
> -SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> -Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.UnregisterDataNotify - Unregister notification event for configuration." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> -GetAck
> -
> -EndScope _IP6CONFIG_SETDATA_FUNC1
> -
> +#
> +# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
> +# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
> +#
> +# This program and the accompanying materials
> +# are licensed and made available under the terms and conditions of the BSD License
> +# which accompanies this distribution. The full text of the license may be found at
> +# http://opensource.org/licenses/bsd-license.php
> +#
> +# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> +# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
> +#
> +################################################################################
> +CaseLevel FUNCTION
> +CaseAttribute AUTO
> +CaseVerboseLevel DEFAULT
> +set reportfile report.csv
> +
> +#
> +# test case Name, category, description, GUID...
> +#
> +CaseGuid EF8FF5B4-8855-4fbd-87C5-C28C7312302A
> +CaseName SetData.Func1.Case1
> +CaseCategory IP6Config
> +CaseDescription {SetData must succeed with valid parameters.}
> +
> +################################################################################
> +Include IP6Config/Include/Ip6Config.inc.tcl
> +
> +
> +#
> +# Begin log ...
> +#
> +BeginLog
> +
> +#
> +# BeginScope
> +#
> +BeginScope _IP6CONFIG_SETDATA_FUNC1
> +
> +#
> +# Parameter Definition
> +# R_ represents "Remote EFI Side Parameter"
> +# L_ represents "Local ENTS Side Parameter"
> +#
> +UINTN R_Status
> +UINTN R_Context
> +UINTN R_Context1
> +UINTN R_DoneEvent
> +UINTN R_DoneEvent1
> +UINTN R_Ip6ConfigDataSize
> +UINT32 R_Ip6ConfigDataType
> +EFI_IP6_CONFIG_INTERFACE_INFO R_Ip6ConfigInterfaceInfo
> +EFI_IP6_CONFIG_INTERFACE_ID R_Ip6ConfigInterfaceId
> +UINT32 R_Ip6ConfigPolicy
> +EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS R_Ip6ConfigDadTransmits
> +
> +#
> +# Check Point: Call Ip6Config->SetData to set AltInterfaceId
> +#
> +SetVar R_Ip6ConfigDataType $IP6CDT(AltInterfaceId)
> +SetVar R_Ip6ConfigDataSize [Sizeof EFI_IP6_CONFIG_INTERFACE_ID]
> +SetVar R_Ip6ConfigInterfaceId.Id(0) 0
> +SetVar R_Ip6ConfigInterfaceId.Id(1) 1
> +SetVar R_Ip6ConfigInterfaceId.Id(2) 2
> +SetVar R_Ip6ConfigInterfaceId.Id(3) 3
> +SetVar R_Ip6ConfigInterfaceId.Id(4) 4
> +SetVar R_Ip6ConfigInterfaceId.Id(5) 5
> +SetVar R_Ip6ConfigInterfaceId.Id(6) 6
> +SetVar R_Ip6ConfigInterfaceId.Id(7) 7
> +
> +SetVar R_Context 0
> +BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context,\
> + &@R_DoneEvent, &@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "BS.CreateEvent." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.RegisterDataNotify - Register notification event for configuration." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigInterfaceId,&@R_Status"
> +GetAck
> +GetVar R_Status
> +if { $R_Status == $EFI_SUCCESS } {
> + set assert pass
> + RecordAssertion $assert $Ip6ConfigSetDataFunc1AssertionGuid001 \
> + "Ip6Config.SetData - Call SetData to set AltInterfaceId." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +} elseif { $R_Status == $EFI_NOT_READY } {
> + set i 0
> + set L_TimeOut 30
> + while { 1 > 0 } {
> + GetVar R_Context
> + if { $R_Context == 1 } {
> + break
> + } elseif { $i == $L_TimeOut } {
> + set assert fail
> + RecordAssertion $assert $Ip6ConfigSetDataFunc1AssertionGuid001 \
> + "SetData failed.(event hasn't been signaled before TIMEOUT)." \
> + "TIMEOUT value is $L_TimeOut (sec), "
> +
> + SetVar R_Ip6ConfigDataType $IP6CDT(AltInterfaceId)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_SETDATA_FUNC1
> + EndLog
> + return
> + }
> + incr i
> + Stall 1
> + }
> +} else {
> + set assert fail
> + RecordAssertion $assert $Ip6ConfigSetDataFunc1AssertionGuid001 \
> + "Ip6Config.SetData - Call SetData to set AltInterfaceId." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +
> + SetVar R_Ip6ConfigDataType $IP6CDT(AltInterfaceId)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_SETDATA_FUNC1
> + EndLog
> + return
> +}
> +
> +Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigInterfaceId,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.GetData - Call GetData to get AltInterfaceId value." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +GetVar R_Ip6ConfigInterfaceId
> +if { ${R_Ip6ConfigInterfaceId.Id(0)} == 0 && ${R_Ip6ConfigInterfaceId.Id(1)} == 1 && ${R_Ip6ConfigInterfaceId.Id(2)} == 2 && ${R_Ip6ConfigInterfaceId.Id(3)} == 3 && ${R_Ip6ConfigInterfaceId.Id(4)} == 4 && ${R_Ip6ConfigInterfaceId.Id(5)} == 5 && ${R_Ip6ConfigInterfaceId.Id(6)} == 6 && ${R_Ip6ConfigInterfaceId.Id(7)} == 7} {
> + set assert pass
> +} else {
> + set assert fail
> +}
> +RecordAssertion $assert $Ip6ConfigSetDataFunc1AssertionGuid002 \
> + "Set AltInterfaceId succeeds(event is signaled correctly and data correct)."
> +
> +#
> +# Check Point: Call Ip6Config->SetData to set DadXmits
> +#
> +SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> +SetVar R_Ip6ConfigDataSize [Sizeof EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS]
> +SetVar R_Ip6ConfigDadTransmits.DupAddrDetectTransmits 3
> +
> +SetVar R_Context1 0
> +BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context1,\
> + &@R_DoneEvent1, &@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "BS.CreateEvent." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.RegisterDataNotify - Register notification event for configuration." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigDadTransmits,&@R_Status"
> +GetAck
> +GetVar R_Status
> +if { $R_Status == $EFI_SUCCESS } {
> + set assert pass
> + RecordAssertion $assert $Ip6ConfigSetDataFunc1AssertionGuid003 \
> + "Ip6Config.SetData - Call SetData to set DadXmits." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +} elseif { $R_Status == $EFI_NOT_READY } {
> + set i 0
> + set L_TimeOut 30
> + while { 1 > 0 } {
> + GetVar R_Context1
> + if { $R_Context1 == 1 } {
> + break
> + } elseif { $i == $L_TimeOut } {
> + set assert fail
> + RecordAssertion $assert $Ip6ConfigSetDataFunc1AssertionGuid003 \
> + "SetData failed.(event hasn't been signaled before TIMEOUT)." \
> + "TIMEOUT value is $L_TimeOut (sec), "
> +
> + SetVar R_Ip6ConfigDataType $IP6CDT(AltInterfaceId)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_SETDATA_FUNC1
> + EndLog
> + return
> + }
> + incr i
> + Stall 1
> + }
> +} else {
> + set assert fail
> + RecordAssertion $assert $Ip6ConfigSetDataFunc1AssertionGuid003 \
> + "Ip6Config.SetData - Call SetData to set manual DadXmits." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> + SetVar R_Ip6ConfigDataType $IP6CDT(AltInterfaceId)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_SETDATA_FUNC1
> + EndLog
> +}
> +
> +Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigDadTransmits,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.GetData - Call GetData to get DadXmits value." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +GetVar R_Ip6ConfigDadTransmits
> +if { ${R_Ip6ConfigDadTransmits.DupAddrDetectTransmits} == 3 } {
> + set assert pass
> +} else {
> + set assert fail
> +}
> +RecordAssertion $assert $Ip6ConfigSetDataFunc1AssertionGuid004 \
> + "Set DadXmits succeeds(event is signaled correctly and data correct)."
> +
> +#
> +# Clean up
> +#
> +SetVar R_Ip6ConfigDataType $IP6CDT(AltInterfaceId)
> +Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.UnregisterDataNotify - Unregister notification event for configuration." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +BS->CloseEvent {@R_DoneEvent,&@R_Status}
> +GetAck
> +
> +SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> +Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.UnregisterDataNotify - Unregister notification event for configuration." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> +GetAck
> +
> +EndScope _IP6CONFIG_SETDATA_FUNC1
> +
> EndLog
> \ No newline at end of file
> diff --git a/uefi-sct/EMS/Bin/TestCase/IP6Config/SetData.Func2.Case1.tcl b/uefi-sct/EMS/Bin/TestCase/IP6Config/SetData.Func2.Case1.tcl
> new file mode 100644
> index 0000000..4d9ec42
> --- /dev/null
> +++ b/uefi-sct/EMS/Bin/TestCase/IP6Config/SetData.Func2.Case1.tcl
> @@ -0,0 +1,838 @@
> +#
> +# Copyright (c) 2018, Intel Corporation. All rights reserved.<BR>
> +#
> +# This program and the accompanying materials
> +# are licensed and made available under the terms and conditions of the BSD License
> +# which accompanies this distribution. The full text of the license may be found at
> +# http://opensource.org/licenses/bsd-license.php
> +#
> +# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> +# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
> +#
> +################################################################################
> +CaseLevel CONFORMANCE
> +CaseAttribute AUTO
> +CaseVerboseLevel DEFAULT
> +set reportfile report.csv
> +
> +#
> +# test case Name, category, description, GUID...
> +#
> +CaseGuid 79F40434-2684-459C-8EEB-DCFB822D93F7
> +CaseName SetData.Func2.Case1
> +CaseCategory IP6Config
> +CaseDescription {SetData to clear the configuration.}
> +
> +################################################################################
> +Include IP6Config/Include/Ip6Config.inc.tcl
> +
> +#
> +# Begin log ...
> +#
> +BeginLog
> +
> +#
> +# BeginScope
> +#
> +BeginScope _IP6CONFIG_SETDATA_FUNC2
> +
> +#
> +# Parameter Definition
> +# R_ represents "Remote EFI Side Parameter"
> +# L_ represents "Local ENTS Side Parameter"
> +#
> +UINTN R_Status
> +UINTN R_Context
> +UINTN R_DoneEvent
> +UINTN R_Ip6ConfigDataSize
> +UINT32 R_Ip6ConfigDataType
> +EFI_IP6_CONFIG_INTERFACE_INFO R_Ip6ConfigInterfaceInfo
> +EFI_IP6_CONFIG_INTERFACE_ID R_Ip6ConfigInterfaceId
> +UINT32 R_Ip6ConfigPolicy
> +EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS R_Ip6ConfigDadTransmits
> +
> +#
> +# Check Point: Call Ip6Config->SetData to set manual policy
> +#
> +SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> +SetVar R_Ip6ConfigDataSize [Sizeof UINT32]
> +SetVar R_Ip6ConfigPolicy $IP6CP(Manual)
> +
> +SetVar R_Context 0
> +BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context,\
> + &@R_DoneEvent, &@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "BS.CreateEvent." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.RegisterDataNotify - Register notification event for configuration." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_Status"
> +GetAck
> +GetVar R_Status
> +if { $R_Status == $EFI_SUCCESS } {
> + set assert pass
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.SetData - Call SetData to set manual policy." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +} elseif { $R_Status == $EFI_NOT_READY } {
> + set i 0
> + set L_TimeOut 30
> + while { 1 > 0 } {
> + GetVar R_Context
> + if { $R_Context == 1 } {
> + break
> + } elseif { $i == $L_TimeOut } {
> + set assert fail
> + RecordAssertion $assert $GenericAssertionGuid \
> + "SetData failed.(event hasn't been signaled before TIMEOUT)." \
> + "TIMEOUT value is $L_TimeOut (sec), "
> +
> + SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_SETDATA_FUNC2
> + EndLog
> + return
> + }
> + incr i
> + Stall 1
> + }
> +} else {
> + set assert fail
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.SetData - Call SetData to set manual policy." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> + SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_SETDATA_FUNC2
> + EndLog
> + return
> +}
> +
> +SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> +Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> +GetAck
> +BS->CloseEvent {@R_DoneEvent,&@R_Status}
> +GetAck
> +
> +Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.GetData - Call GetData to get policy value." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +GetVar R_Ip6ConfigPolicy
> +if { $R_Ip6ConfigPolicy == $IP6CP(Manual) } {
> + set assert pass
> +} else {
> + set assert fail
> +
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Set manual policy fails(event is signaled correctly but data is incorrect)."
> + EndScope _IP6CONFIG_SETDATA_FUNC2
> + EndLog
> + return
> +}
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Set manual policy succeeds(event is signaled correctly and data correct)."
> +
> +#
> +# Check Point: Call Ip6Config->SetData to set DadXmits 20
> +#
> +SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> +SetVar R_Ip6ConfigDataSize [Sizeof EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS]
> +SetVar R_Ip6ConfigDadTransmits.DupAddrDetectTransmits 20
> +
> +SetVar R_Context 0
> +BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context,\
> + &@R_DoneEvent, &@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "BS.CreateEvent." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.RegisterDataNotify - Register notification event for configuration." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigDadTransmits,&@R_Status"
> +GetAck
> +GetVar R_Status
> +if { $R_Status == $EFI_SUCCESS } {
> + set assert pass
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.SetData - Call SetData to set DadXmits 20." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +} elseif { $R_Status == $EFI_NOT_READY } {
> + set i 0
> + set L_TimeOut 30
> + while { 1 > 0 } {
> + GetVar R_Context
> + if { $R_Context == 1 } {
> + break
> + } elseif { $i == $L_TimeOut } {
> + set assert fail
> + RecordAssertion $assert $GenericAssertionGuid \
> + "SetData failed.(event hasn't been signaled before TIMEOUT)." \
> + "TIMEOUT value is $L_TimeOut (sec), "
> +
> + SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_SETDATA_FUNC2
> + EndLog
> + return
> + }
> + incr i
> + Stall 1
> + }
> +} else {
> + set assert fail
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.SetData - Call SetData to set DadXmits 20." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> + SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_SETDATA_FUNC2
> + EndLog
> + return
> +}
> +
> +SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> +Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> +GetAck
> +BS->CloseEvent {@R_DoneEvent,&@R_Status}
> +GetAck
> +
> +Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigDadTransmits,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.GetData - Call GetData to get DadXmits value." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +GetVar R_Ip6ConfigDadTransmits.DupAddrDetectTransmits
> +if { ${R_Ip6ConfigDadTransmits.DupAddrDetectTransmits} == 20 } {
> + set assert pass
> +} else {
> + set assert fail
> +
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Set DadXmits fails(event is signaled correctly but data is incorrect)."
> +
> + EndScope _IP6CONFIG_SETDATA_FUNC2
> + EndLog
> + return
> +}
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Set DadXmits succeeds(event is signaled correctly and data correct)."
> +
> +Stall 30
> +
> +#
> +# Check Point : Set Manual Address with valid parameter
> +#
> +
> +EFI_IP6_CONFIG_MANUAL_ADDRESS R_Temp_Ip6ConfigManualAddress
> +
> +set L_ManualListLen 1
> +EFI_IP6_CONFIG_MANUAL_ADDRESS R_Ip6ConfigManualAddress
> +set L_UnitLen [Sizeof EFI_IP6_CONFIG_MANUAL_ADDRESS]
> +set L_ListLen [expr {$L_UnitLen * $L_ManualListLen}]
> +SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
> +SetVar R_Ip6ConfigDataSize $L_ListLen
> +SetVar R_Temp_Ip6ConfigManualAddress.IsAnycast FALSE
> +SetVar R_Temp_Ip6ConfigManualAddress.PrefixLength 64
> +SetIpv6Address R_Temp_Ip6ConfigManualAddress.Address "2002::5000"
> +SetVar R_Ip6ConfigManualAddress @R_Temp_Ip6ConfigManualAddress
> +
> +SetVar R_Context 0
> +BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context,\
> + &@R_DoneEvent, &@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "BS.CreateEvent." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.RegisterDataNotify - Register notification event for configuration." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigManualAddress,&@R_Status"
> +GetAck
> +GetVar R_Status
> +if { $R_Status == $EFI_SUCCESS } {
> + set assert pass
> + RecordAssertion $assert $Ip6ConfigSetDataFunc2AssertionGuid001 \
> + "Ip6Config.SetData - Call SetData to set MANUAL ADDRESS." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +} elseif { $R_Status == $EFI_NOT_READY } {
> + set i 0
> + set L_TimeOut 30
> + while { 1 > 0 } {
> + GetVar R_Context
> + if { $R_Context == 1 } {
> + break
> + } elseif { $i == $L_TimeOut } {
> + set assert fail
> + RecordAssertion $assert $Ip6ConfigSetDataFunc2AssertionGuid001 \
> + "SetData to set MANUAL ADDRESS fail.(event hasn't been signaled before TIMEOUT)." \
> + "TIMEOUT value is $L_TimeOut (sec), "
> +
> + SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_SETDATA_FUNC2
> + EndLog
> + return
> + }
> + incr i
> + Stall 1
> + }
> +} else {
> + set assert fail
> + RecordAssertion $assert $Ip6ConfigSetDataFunc2AssertionGuid001 \
> + "Ip6Config.SetData - Call SetData to set MANUAL ADDRESS." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> + SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_SETDATA_FUNC2
> + EndLog
> + return
> +}
> +
> +SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
> +Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> +GetAck
> +BS->CloseEvent {@R_DoneEvent,&@R_Status}
> +GetAck
> +
> +Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigManualAddress,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.GetData - Call GetData to get Manual Address." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +GetVar R_Ip6ConfigManualAddress
> +
> +set L_Proc_Ipv6Address [GetIpv6Address {R_Ip6ConfigManualAddress.Address}]
> +if { [string compare $L_Proc_Ipv6Address 2002:0000:0000:0000:0000:0000:0000:5000] != 0 } {
> + puts $L_Proc_Ipv6Address
> + set assert fail
> +
> + RecordAssertion $assert $Ip6ConfigSetDataFunc2AssertionGuid002 \
> + "Ip6Config.SetData - Set Gateway fail(event is signaled correctly but data is incorrect.)"
> +} elseif {${R_Ip6ConfigManualAddress.PrefixLength} != 64} {
> + set assert fail
> +
> + RecordAssertion $assert $Ip6ConfigSetDataFunc2AssertionGuid002 \
> + "Ip6Config.SetData - Set Gateway fail(event is signaled correctly but data is incorrect.)"
> +
> +} elseif {${R_Ip6ConfigManualAddress.IsAnycast} != false} {
> + set assert fail
> +
> + RecordAssertion $assert $Ip6ConfigSetDataFunc2AssertionGuid002 \
> + "Ip6Config.SetData - Set Gateway fail(event is signaled correctly but data is incorrect.)"
> +
> +} else {
> + RecordAssertion $assert $Ip6ConfigSetDataFunc2AssertionGuid002 \
> + "Ip6Config.SetData - Set Gateway success(event is signaled correctly and data is correct.)"
> +}
> +
> +#
> +# Clear the Manual Address
> +#
> +SetVar R_Context 0
> +BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context,\
> + &@R_DoneEvent, &@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "BS.CreateEvent." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.RegisterDataNotify - Register notification event for configuration." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +Ip6Config->SetData "@R_Ip6ConfigDataType,0,NULL,&@R_Status"
> +GetAck
> +GetVar R_Status
> +if { $R_Status == $EFI_SUCCESS } {
> + set assert pass
> + RecordAssertion $assert $Ip6ConfigSetDataFunc2AssertionGuid003 \
> + "Ip6Config.SetData - Call SetData to clear MANUAL ADDRESS." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +} elseif { $R_Status == $EFI_NOT_READY } {
> + set i 0
> + set L_TimeOut 30
> + while { 1 > 0 } {
> + GetVar R_Context
> + if { $R_Context == 1 } {
> + break
> + } elseif { $i == $L_TimeOut } {
> + set assert fail
> + RecordAssertion $assert $Ip6ConfigSetDataFunc2AssertionGuid003 \
> + "SetData to clear MANUAL ADDRESS fail.(event hasn't been signaled before TIMEOUT)." \
> + "TIMEOUT value is $L_TimeOut (sec), "
> +
> + SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_SETDATA_FUNC2
> + EndLog
> + return
> + }
> + incr i
> + Stall 1
> + }
> +} else {
> + set assert fail
> + RecordAssertion $assert $Ip6ConfigSetDataFunc2AssertionGuid003 \
> + "Ip6Config.SetData - Call SetData to clear MANUAL ADDRESS." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> + SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_SETDATA_FUNC2
> + EndLog
> + return
> +}
> +
> +SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
> +Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> +GetAck
> +BS->CloseEvent {@R_DoneEvent,&@R_Status}
> +GetAck
> +
> +Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigManualAddress,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_NOT_FOUND]
> +RecordAssertion $assert $Ip6ConfigSetDataFunc2AssertionGuid004 \
> + "Ip6Config.GetData - Call GetData to get Manual Address." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_NOT_FOUND"
> +
> +
> +#
> +# Check Point : Set Gateway with valid parameter
> +#
> +
> +set L_GatewayListLen 1
> +EFI_IPv6_ADDRESS R_Temp_Ip6ConfigGateway
> +EFI_IPv6_ADDRESS R_Ip6ConfigGateway
> +set L_UnitLen [Sizeof EFI_IPv6_ADDRESS]
> +set L_ListLen [expr {$L_UnitLen * $L_GatewayListLen}]
> +SetVar R_Ip6ConfigDataType $IP6CDT(Gateway)
> +SetVar R_Ip6ConfigDataSize $L_ListLen
> +
> +SetIpv6Address R_Temp_Ip6ConfigGateway "2002::5001"
> +SetVar R_Ip6ConfigGateway @R_Temp_Ip6ConfigGateway
> +
> +SetVar R_Context 0
> +BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context,\
> + &@R_DoneEvent, &@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "BS.CreateEvent." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.RegisterDataNotify - Register notification event for configuration." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigGateway,&@R_Status"
> +GetAck
> +GetVar R_Status
> +if { $R_Status == $EFI_SUCCESS } {
> + set assert pass
> + RecordAssertion $assert $Ip6ConfigSetDataFunc2AssertionGuid005 \
> + "Ip6Config.SetData - Call SetData to set Gateway." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +} elseif { $R_Status == $EFI_NOT_READY } {
> + set i 0
> + set L_TimeOut 30
> + while { 1 > 0 } {
> + GetVar R_Context
> + if { $R_Context == 1 } {
> + break
> + } elseif { $i == $L_TimeOut } {
> + set assert fail
> + RecordAssertion $assert $Ip6ConfigSetDataFunc2AssertionGuid005 \
> + "SetData to set Gateway fail.(event hasn't been signaled before TIMEOUT)." \
> + "TIMEOUT value is $L_TimeOut (sec), "
> +
> + SetVar R_Ip6ConfigDataType $IP6CDT(Gateway)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_SETDATA_FUNC2
> + EndLog
> + return
> + }
> + incr i
> + Stall 1
> + }
> +} else {
> + set assert fail
> + RecordAssertion $assert $Ip6ConfigSetDataFunc2AssertionGuid005 \
> + "Ip6Config.SetData - Call SetData to set Gateway." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> + SetVar R_Ip6ConfigDataType $IP6CDT(Gateway)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_SETDATA_FUNC2
> + EndLog
> + return
> +}
> +
> +SetVar R_Ip6ConfigDataType $IP6CDT(Gateway)
> +Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> +GetAck
> +BS->CloseEvent {@R_DoneEvent,&@R_Status}
> +GetAck
> +
> +Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigGateway,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.GetData - Call GetData to get Gateway." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +GetVar R_Ip6ConfigGateway
> +
> +set L_Proc_Ipv6Address [GetIpv6Address {R_Ip6ConfigGateway}]
> +if { [string compare $L_Proc_Ipv6Address 2002:0000:0000:0000:0000:0000:0000:5001] != 0 } {
> + puts $L_Proc_Ipv6Address
> + set assert fail
> +
> + RecordAssertion $assert $Ip6ConfigSetDataFunc2AssertionGuid006 \
> + "Ip6Config.SetData - Set Gateway fail(event is signaled correctly but data is incorrect.)"
> +} else {
> +
> + RecordAssertion $assert $Ip6ConfigSetDataFunc2AssertionGuid006 \
> + "Ip6Config.SetData - Set Gateway success(event is signaled correctly and data is correct.)"
> +}
> +
> +#
> +# Clear the Gateway
> +#
> +SetVar R_Context 0
> +BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context,\
> + &@R_DoneEvent, &@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "BS.CreateEvent." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.RegisterDataNotify - Register notification event for configuration." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +Ip6Config->SetData "@R_Ip6ConfigDataType,0,NULL,&@R_Status"
> +GetAck
> +GetVar R_Status
> +if { $R_Status == $EFI_SUCCESS } {
> + set assert pass
> + RecordAssertion $assert $Ip6ConfigSetDataFunc2AssertionGuid007 \
> + "Ip6Config.SetData - Call SetData to clear Gateway." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +} elseif { $R_Status == $EFI_NOT_READY } {
> + set i 0
> + set L_TimeOut 30
> + while { 1 > 0 } {
> + GetVar R_Context
> + if { $R_Context == 1 } {
> + break
> + } elseif { $i == $L_TimeOut } {
> + set assert fail
> + RecordAssertion $assert $Ip6ConfigSetDataFunc2AssertionGuid007 \
> + "SetData to clear Gateway fail.(event hasn't been signaled before TIMEOUT)." \
> + "TIMEOUT value is $L_TimeOut (sec), "
> +
> + SetVar R_Ip6ConfigDataType $IP6CDT(Gateway)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_SETDATA_FUNC2
> + EndLog
> + return
> + }
> + incr i
> + Stall 1
> + }
> +} else {
> + set assert fail
> + RecordAssertion $assert $Ip6ConfigSetDataFunc2AssertionGuid007 \
> + "Ip6Config.SetData - Call SetData to clear Gateway." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> + SetVar R_Ip6ConfigDataType $IP6CDT(Gateway)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_SETDATA_FUNC2
> + EndLog
> + return
> +}
> +
> +SetVar R_Ip6ConfigDataType $IP6CDT(Gateway)
> +Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> +GetAck
> +BS->CloseEvent {@R_DoneEvent,&@R_Status}
> +GetAck
> +
> +Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigGateway,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_NOT_FOUND]
> +RecordAssertion $assert $Ip6ConfigSetDataFunc2AssertionGuid008 \
> + "Ip6Config.GetData - Call GetData to get Gateway." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_NOT_FOUND"
> +
> +
> +#
> +# Check Point : Set DnsServer with valid parameter
> +#
> +
> +set L_DnsServerListLen 1
> +EFI_IPv6_ADDRESS R_Temp_Ip6ConfigDnsServer
> +EFI_IPv6_ADDRESS R_Ip6ConfigDnsServer
> +set L_UnitLen [Sizeof EFI_IPv6_ADDRESS]
> +set L_ListLen [expr {$L_UnitLen * $L_DnsServerListLen}]
> +SetVar R_Ip6ConfigDataType $IP6CDT(DnsServer)
> +SetVar R_Ip6ConfigDataSize $L_ListLen
> +
> +SetIpv6Address R_Temp_Ip6ConfigDnsServer "2002::5002"
> +SetVar R_Ip6ConfigDnsServer @R_Temp_Ip6ConfigDnsServer
> +
> +SetVar R_Context 0
> +BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context,\
> + &@R_DoneEvent, &@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "BS.CreateEvent." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.RegisterDataNotify - Register notification event for configuration." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigDnsServer,&@R_Status"
> +GetAck
> +GetVar R_Status
> +if { $R_Status == $EFI_SUCCESS } {
> + set assert pass
> + RecordAssertion $assert $Ip6ConfigSetDataFunc2AssertionGuid009 \
> + "Ip6Config.SetData - Call SetData to set DnsServer." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +} elseif { $R_Status == $EFI_NOT_READY } {
> + set i 0
> + set L_TimeOut 30
> + while { 1 > 0 } {
> + GetVar R_Context
> + if { $R_Context == 1 } {
> + break
> + } elseif { $i == $L_TimeOut } {
> + set assert fail
> + RecordAssertion $assert $Ip6ConfigSetDataFunc2AssertionGuid009 \
> + "SetData to set DnsServer fail.(event hasn't been signaled before TIMEOUT)." \
> + "TIMEOUT value is $L_TimeOut (sec), "
> +
> + SetVar R_Ip6ConfigDataType $IP6CDT(DnsServer)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_SETDATA_FUNC2
> + EndLog
> + return
> + }
> + incr i
> + Stall 1
> + }
> +} else {
> + set assert fail
> + RecordAssertion $assert $Ip6ConfigSetDataFunc2AssertionGuid009 \
> + "Ip6Config.SetData - Call SetData to set DnsServer." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> + SetVar R_Ip6ConfigDataType $IP6CDT(DnsServer)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_SETDATA_FUNC2
> + EndLog
> + return
> +}
> +
> +SetVar R_Ip6ConfigDataType $IP6CDT(DnsServer)
> +Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> +GetAck
> +BS->CloseEvent {@R_DoneEvent,&@R_Status}
> +GetAck
> +
> +Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigDnsServer,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.GetData - Call GetData to get DnsServer." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +GetVar R_Ip6ConfigDnsServer
> +
> +set L_Proc_Ipv6Address [GetIpv6Address {R_Ip6ConfigDnsServer}]
> +if { [string compare $L_Proc_Ipv6Address 2002:0000:0000:0000:0000:0000:0000:5002] != 0 } {
> + set assert fail
> +
> + RecordAssertion $assert $Ip6ConfigSetDataFunc2AssertionGuid010 \
> + "Ip6Config.SetData - Set DnsServer fail(event is signaled correctly but data is incorrect.)"
> +} else {
> + RecordAssertion $assert $Ip6ConfigSetDataFunc2AssertionGuid010 \
> + "Ip6Config.SetData - Set DnsServer success(event is signaled correctly and data is correct.)"
> +}
> +
> +#
> +# Clear the DnsServer
> +#
> +SetVar R_Context 0
> +BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context,\
> + &@R_DoneEvent, &@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "BS.CreateEvent." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.RegisterDataNotify - Register notification event for configuration." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +Ip6Config->SetData "@R_Ip6ConfigDataType,0,NULL,&@R_Status"
> +GetAck
> +GetVar R_Status
> +if { $R_Status == $EFI_SUCCESS } {
> + set assert pass
> + RecordAssertion $assert $Ip6ConfigSetDataFunc2AssertionGuid011 \
> + "Ip6Config.SetData - Call SetData to clear DnsServer." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +} elseif { $R_Status == $EFI_NOT_READY } {
> + set i 0
> + set L_TimeOut 30
> + while { 1 > 0 } {
> + GetVar R_Context
> + if { $R_Context == 1 } {
> + break
> + } elseif { $i == $L_TimeOut } {
> + set assert fail
> + RecordAssertion $assert $Ip6ConfigSetDataFunc2AssertionGuid011 \
> + "SetData to clear DnsServer fail.(event hasn't been signaled before TIMEOUT)." \
> + "TIMEOUT value is $L_TimeOut (sec), "
> +
> + SetVar R_Ip6ConfigDataType $IP6CDT(DnsServer)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_SETDATA_FUNC2
> + EndLog
> + return
> + }
> + incr i
> + Stall 1
> + }
> +} else {
> + set assert fail
> + RecordAssertion $assert $Ip6ConfigSetDataFunc2AssertionGuid011 \
> + "Ip6Config.SetData - Call SetData to clear DnsServer." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> + SetVar R_Ip6ConfigDataType $IP6CDT(DnsServer)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_SETDATA_FUNC2
> + EndLog
> + return
> +}
> +
> +SetVar R_Ip6ConfigDataType $IP6CDT(DnsServer)
> +Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> +GetAck
> +BS->CloseEvent {@R_DoneEvent,&@R_Status}
> +GetAck
> +
> +Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigDnsServer,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_NOT_FOUND]
> +RecordAssertion $assert $Ip6ConfigSetDataFunc2AssertionGuid012 \
> + "Ip6Config.GetData - Call GetData to get DnsServer." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_NOT_FOUND"
> +
> +
> +EndScope _IP6CONFIG_SETDATA_FUNC2
> +
> +EndLog
> \ No newline at end of file
> diff --git a/uefi-sct/EMS/Bin/TestCase/IP6Config/UnregisterDataNotify.Conf1.Case1.tcl b/uefi-sct/EMS/Bin/TestCase/IP6Config/UnregisterDataNotify.Conf1.Case1.tcl
> index a36469f..35b36ce 100644
> --- a/uefi-sct/EMS/Bin/TestCase/IP6Config/UnregisterDataNotify.Conf1.Case1.tcl
> +++ b/uefi-sct/EMS/Bin/TestCase/IP6Config/UnregisterDataNotify.Conf1.Case1.tcl
> @@ -1,90 +1,90 @@
> -#
> -# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
> -# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
> -#
> -# This program and the accompanying materials
> -# are licensed and made available under the terms and conditions of the BSD License
> -# which accompanies this distribution. The full text of the license may be found at
> -# http://opensource.org/licenses/bsd-license.php
> -#
> -# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> -# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
> -#
> -################################################################################
> -CaseLevel CONFORMANCE
> -CaseAttribute AUTO
> -CaseVerboseLevel DEFAULT
> -set reportfile report.csv
> -
> -#
> -# test case Name, category, description, GUID...
> -#
> -CaseGuid 8B7B6AA6-2DCB-434b-9533-6346ABCC686D
> -CaseName UnregisterDataNotify.Conf1.Case1
> -CaseCategory IP6Config
> -CaseDescription {UnregisterDataNotify must not succeed when event is NULL.}
> -
> -################################################################################
> -Include IP6Config/Include/Ip6Config.inc.tcl
> -
> -
> -#
> -# Begin log ...
> -#
> -BeginLog
> -
> -#
> -# BeginScope
> -#
> -BeginScope _IP6CONFIG_UNREGISTERDATANOTIFY_CONF1
> -
> -#
> -# Parameter Definition
> -# R_ represents "Remote EFI Side Parameter"
> -# L_ represents "Local ENTS Side Parameter"
> -#
> -UINTN R_Status
> -UINTN R_Context
> -UINTN R_DoneEvent
> -UINTN R_Ip6ConfigDataSize
> -UINT32 R_Ip6ConfigDataType
> -EFI_IP6_CONFIG_INTERFACE_INFO R_Ip6ConfigInterfaceInfo
> -EFI_IP6_CONFIG_INTERFACE_ID R_Ip6ConfigInterfaceId
> -UINT32 R_Ip6ConfigPolicy
> -EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS R_Ip6ConfigDadTransmits
> -
> -#
> -# Check Point: Call Ip6Config->SetData to set manual policy
> -#
> -SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> -SetVar R_Ip6ConfigDataSize [Sizeof UINT32]
> -SetVar R_Ip6ConfigPolicy $IP6CP(Manual)
> -
> -SetVar R_Context 0
> -BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context,\
> - &@R_DoneEvent, &@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "BS.CreateEvent." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -#
> -# Check Point: Call Ip6Config->UnregisterDataNotify with the event NULL
> -#
> -Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType, 0 ,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_INVALID_PARAMETER]
> -RecordAssertion $assert $Ip6ConfigUnregisterDataNotifyConf1AssertionGuid001 \
> - "Ip6Config.UnregisterDataNotify - Unregister notification event with the event NULL." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_INVALID_PARAMETER"
> -
> -#
> -# Clean up
> -#
> -BS->CloseEvent {@R_DoneEvent,&@R_Status}
> -GetAck
> -
> -EndScope _IP6CONFIG_UNREGISTERDATANOTIFY_CONF1
> -
> +#
> +# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
> +# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
> +#
> +# This program and the accompanying materials
> +# are licensed and made available under the terms and conditions of the BSD License
> +# which accompanies this distribution. The full text of the license may be found at
> +# http://opensource.org/licenses/bsd-license.php
> +#
> +# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> +# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
> +#
> +################################################################################
> +CaseLevel CONFORMANCE
> +CaseAttribute AUTO
> +CaseVerboseLevel DEFAULT
> +set reportfile report.csv
> +
> +#
> +# test case Name, category, description, GUID...
> +#
> +CaseGuid 8B7B6AA6-2DCB-434b-9533-6346ABCC686D
> +CaseName UnregisterDataNotify.Conf1.Case1
> +CaseCategory IP6Config
> +CaseDescription {UnregisterDataNotify must not succeed when event is NULL.}
> +
> +################################################################################
> +Include IP6Config/Include/Ip6Config.inc.tcl
> +
> +
> +#
> +# Begin log ...
> +#
> +BeginLog
> +
> +#
> +# BeginScope
> +#
> +BeginScope _IP6CONFIG_UNREGISTERDATANOTIFY_CONF1
> +
> +#
> +# Parameter Definition
> +# R_ represents "Remote EFI Side Parameter"
> +# L_ represents "Local ENTS Side Parameter"
> +#
> +UINTN R_Status
> +UINTN R_Context
> +UINTN R_DoneEvent
> +UINTN R_Ip6ConfigDataSize
> +UINT32 R_Ip6ConfigDataType
> +EFI_IP6_CONFIG_INTERFACE_INFO R_Ip6ConfigInterfaceInfo
> +EFI_IP6_CONFIG_INTERFACE_ID R_Ip6ConfigInterfaceId
> +UINT32 R_Ip6ConfigPolicy
> +EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS R_Ip6ConfigDadTransmits
> +
> +#
> +# Check Point: Call Ip6Config->SetData to set manual policy
> +#
> +SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> +SetVar R_Ip6ConfigDataSize [Sizeof UINT32]
> +SetVar R_Ip6ConfigPolicy $IP6CP(Manual)
> +
> +SetVar R_Context 0
> +BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context,\
> + &@R_DoneEvent, &@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "BS.CreateEvent." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +#
> +# Check Point: Call Ip6Config->UnregisterDataNotify with the event NULL
> +#
> +Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType, 0 ,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_INVALID_PARAMETER]
> +RecordAssertion $assert $Ip6ConfigUnregisterDataNotifyConf1AssertionGuid001 \
> + "Ip6Config.UnregisterDataNotify - Unregister notification event with the event NULL." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_INVALID_PARAMETER"
> +
> +#
> +# Clean up
> +#
> +BS->CloseEvent {@R_DoneEvent,&@R_Status}
> +GetAck
> +
> +EndScope _IP6CONFIG_UNREGISTERDATANOTIFY_CONF1
> +
> EndLog
> \ No newline at end of file
> diff --git a/uefi-sct/EMS/Bin/TestCase/IP6Config/UnregisterDataNotify.Conf2.Case1.tcl b/uefi-sct/EMS/Bin/TestCase/IP6Config/UnregisterDataNotify.Conf2.Case1.tcl
> index d41f141..7eb5808 100644
> --- a/uefi-sct/EMS/Bin/TestCase/IP6Config/UnregisterDataNotify.Conf2.Case1.tcl
> +++ b/uefi-sct/EMS/Bin/TestCase/IP6Config/UnregisterDataNotify.Conf2.Case1.tcl
> @@ -1,83 +1,83 @@
> -#
> -# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
> -# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
> -#
> -# This program and the accompanying materials
> -# are licensed and made available under the terms and conditions of the BSD License
> -# which accompanies this distribution. The full text of the license may be found at
> -# http://opensource.org/licenses/bsd-license.php
> -#
> -# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> -# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
> -#
> -################################################################################
> -CaseLevel CONFORMANCE
> -CaseAttribute AUTO
> -CaseVerboseLevel DEFAULT
> -set reportfile report.csv
> -
> -#
> -# test case Name, category, description, GUID...
> -#
> -CaseGuid 9CE66A42-FADC-4d44-B577-B58CED8E984B
> -CaseName UnregisterDataNotify.Conf2.Case1
> -CaseCategory IP6Config
> -CaseDescription {UnregisterDataNotify must not succeed when then event has not been registered for the data type ever.}
> -
> -################################################################################
> -Include IP6Config/Include/Ip6Config.inc.tcl
> -
> -
> -#
> -# Begin log ...
> -#
> -BeginLog
> -
> -#
> -# BeginScope
> -#
> -BeginScope _IP6CONFIG_UNREGISTERDATANOTIFY_CONF2_CASE1
> -
> -#
> -# Parameter Definition
> -# R_ represents "Remote EFI Side Parameter"
> -# L_ represents "Local ENTS Side Parameter"
> -#
> -UINTN R_Status
> -UINTN R_Context
> -UINTN R_DoneEvent
> -UINTN R_Ip6ConfigDataSize
> -UINT32 R_Ip6ConfigDataType
> -
> -#
> -# Check Point: Call Ip6Config->UnregisterDataNotify with the event not registered
> -#
> -
> -SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
> -SetVar R_Ip6ConfigDataSize [Sizeof EFI_IP6_CONFIG_MANUAL_ADDRESS]
> -
> -SetVar R_Context 0
> -BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context,\
> - &@R_DoneEvent, &@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "BS.CreateEvent." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType, @R_DoneEvent ,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_NOT_FOUND]
> -RecordAssertion $assert $Ip6ConfigUnregisterDataNotifyConf2AssertionGuid001 \
> - "Ip6Config.UnregisterDataNotify - Unregister notification event with the event not registered." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_NOT_FOUND"
> -
> -#
> -# Clean up
> -#
> -BS->CloseEvent {@R_DoneEvent,&@R_Status}
> -GetAck
> -
> -EndScope _IP6CONFIG_UNREGISTERDATANOTIFY_CONF2_CASE1
> -
> +#
> +# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
> +# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
> +#
> +# This program and the accompanying materials
> +# are licensed and made available under the terms and conditions of the BSD License
> +# which accompanies this distribution. The full text of the license may be found at
> +# http://opensource.org/licenses/bsd-license.php
> +#
> +# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> +# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
> +#
> +################################################################################
> +CaseLevel CONFORMANCE
> +CaseAttribute AUTO
> +CaseVerboseLevel DEFAULT
> +set reportfile report.csv
> +
> +#
> +# test case Name, category, description, GUID...
> +#
> +CaseGuid 9CE66A42-FADC-4d44-B577-B58CED8E984B
> +CaseName UnregisterDataNotify.Conf2.Case1
> +CaseCategory IP6Config
> +CaseDescription {UnregisterDataNotify must not succeed when then event has not been registered for the data type ever.}
> +
> +################################################################################
> +Include IP6Config/Include/Ip6Config.inc.tcl
> +
> +
> +#
> +# Begin log ...
> +#
> +BeginLog
> +
> +#
> +# BeginScope
> +#
> +BeginScope _IP6CONFIG_UNREGISTERDATANOTIFY_CONF2_CASE1
> +
> +#
> +# Parameter Definition
> +# R_ represents "Remote EFI Side Parameter"
> +# L_ represents "Local ENTS Side Parameter"
> +#
> +UINTN R_Status
> +UINTN R_Context
> +UINTN R_DoneEvent
> +UINTN R_Ip6ConfigDataSize
> +UINT32 R_Ip6ConfigDataType
> +
> +#
> +# Check Point: Call Ip6Config->UnregisterDataNotify with the event not registered
> +#
> +
> +SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
> +SetVar R_Ip6ConfigDataSize [Sizeof EFI_IP6_CONFIG_MANUAL_ADDRESS]
> +
> +SetVar R_Context 0
> +BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context,\
> + &@R_DoneEvent, &@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "BS.CreateEvent." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType, @R_DoneEvent ,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_NOT_FOUND]
> +RecordAssertion $assert $Ip6ConfigUnregisterDataNotifyConf2AssertionGuid001 \
> + "Ip6Config.UnregisterDataNotify - Unregister notification event with the event not registered." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_NOT_FOUND"
> +
> +#
> +# Clean up
> +#
> +BS->CloseEvent {@R_DoneEvent,&@R_Status}
> +GetAck
> +
> +EndScope _IP6CONFIG_UNREGISTERDATANOTIFY_CONF2_CASE1
> +
> EndLog
> \ No newline at end of file
> diff --git a/uefi-sct/EMS/Bin/TestCase/IP6Config/UnregisterDataNotify.Conf2.Case2.tcl b/uefi-sct/EMS/Bin/TestCase/IP6Config/UnregisterDataNotify.Conf2.Case2.tcl
> index 5608dbe..e56d26a 100644
> --- a/uefi-sct/EMS/Bin/TestCase/IP6Config/UnregisterDataNotify.Conf2.Case2.tcl
> +++ b/uefi-sct/EMS/Bin/TestCase/IP6Config/UnregisterDataNotify.Conf2.Case2.tcl
> @@ -1,99 +1,99 @@
> -#
> -# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
> -# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
> -#
> -# This program and the accompanying materials
> -# are licensed and made available under the terms and conditions of the BSD License
> -# which accompanies this distribution. The full text of the license may be found at
> -# http://opensource.org/licenses/bsd-license.php
> -#
> -# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> -# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
> -#
> -################################################################################
> -CaseLevel CONFORMANCE
> -CaseAttribute AUTO
> -CaseVerboseLevel DEFAULT
> -set reportfile report.csv
> -
> -#
> -# test case Name, category, description, GUID...
> -#
> -CaseGuid EB679CF9-9A56-4a9f-B5CF-2D845B044560
> -CaseName UnregisterDataNotify.Conf2.Case2
> -CaseCategory IP6Config
> -CaseDescription {UnregisterDataNotify must not succeed when the event was registered and then unregistered for the data type.}
> -
> -################################################################################
> -Include IP6Config/Include/Ip6Config.inc.tcl
> -
> -
> -#
> -# Begin log ...
> -#
> -BeginLog
> -
> -#
> -# BeginScope
> -#
> -BeginScope _IP6CONFIG_UNREGISTERDATANOTIFY_CONF2_CASE2
> -
> -#
> -# Parameter Definition
> -# R_ represents "Remote EFI Side Parameter"
> -# L_ represents "Local ENTS Side Parameter"
> -#
> -UINTN R_Status
> -UINTN R_Context
> -UINTN R_DoneEvent
> -UINTN R_Ip6ConfigDataSize
> -UINT32 R_Ip6ConfigDataType
> -
> -#
> -# Check Point: Register event for Datatype - ManualAddress and then unregister it
> -#
> -SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
> -SetVar R_Ip6ConfigDataSize [Sizeof EFI_IP6_CONFIG_MANUAL_ADDRESS]
> -
> -SetVar R_Context 0
> -BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context,\
> - &@R_DoneEvent, &@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "BS.CreateEvent." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.RegisterDataNotify - Register notification event for configuration." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType, @R_DoneEvent ,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.UnregisterDataNotify - Unregister notification event with correct parameters." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -#
> -# Check Point: Unregister the event again
> -#
> -Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType, @R_DoneEvent ,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_NOT_FOUND]
> -RecordAssertion $assert $Ip6ConfigUnregisterDataNotifyConf2AssertionGuid002 \
> - "Ip6Config.UnregisterDataNotify - Unregister notification event with the event has been unregistered." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_NOT_FOUND"
> -
> -#
> -# Clean up
> -#
> -BS->CloseEvent {@R_DoneEvent,&@R_Status}
> -GetAck
> -
> -EndScope _IP6CONFIG_UNREGISTERDATANOTIFY_CONF2_CASE2
> -
> +#
> +# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
> +# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
> +#
> +# This program and the accompanying materials
> +# are licensed and made available under the terms and conditions of the BSD License
> +# which accompanies this distribution. The full text of the license may be found at
> +# http://opensource.org/licenses/bsd-license.php
> +#
> +# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> +# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
> +#
> +################################################################################
> +CaseLevel CONFORMANCE
> +CaseAttribute AUTO
> +CaseVerboseLevel DEFAULT
> +set reportfile report.csv
> +
> +#
> +# test case Name, category, description, GUID...
> +#
> +CaseGuid EB679CF9-9A56-4a9f-B5CF-2D845B044560
> +CaseName UnregisterDataNotify.Conf2.Case2
> +CaseCategory IP6Config
> +CaseDescription {UnregisterDataNotify must not succeed when the event was registered and then unregistered for the data type.}
> +
> +################################################################################
> +Include IP6Config/Include/Ip6Config.inc.tcl
> +
> +
> +#
> +# Begin log ...
> +#
> +BeginLog
> +
> +#
> +# BeginScope
> +#
> +BeginScope _IP6CONFIG_UNREGISTERDATANOTIFY_CONF2_CASE2
> +
> +#
> +# Parameter Definition
> +# R_ represents "Remote EFI Side Parameter"
> +# L_ represents "Local ENTS Side Parameter"
> +#
> +UINTN R_Status
> +UINTN R_Context
> +UINTN R_DoneEvent
> +UINTN R_Ip6ConfigDataSize
> +UINT32 R_Ip6ConfigDataType
> +
> +#
> +# Check Point: Register event for Datatype - ManualAddress and then unregister it
> +#
> +SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
> +SetVar R_Ip6ConfigDataSize [Sizeof EFI_IP6_CONFIG_MANUAL_ADDRESS]
> +
> +SetVar R_Context 0
> +BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context,\
> + &@R_DoneEvent, &@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "BS.CreateEvent." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.RegisterDataNotify - Register notification event for configuration." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType, @R_DoneEvent ,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.UnregisterDataNotify - Unregister notification event with correct parameters." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +#
> +# Check Point: Unregister the event again
> +#
> +Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType, @R_DoneEvent ,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_NOT_FOUND]
> +RecordAssertion $assert $Ip6ConfigUnregisterDataNotifyConf2AssertionGuid002 \
> + "Ip6Config.UnregisterDataNotify - Unregister notification event with the event has been unregistered." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_NOT_FOUND"
> +
> +#
> +# Clean up
> +#
> +BS->CloseEvent {@R_DoneEvent,&@R_Status}
> +GetAck
> +
> +EndScope _IP6CONFIG_UNREGISTERDATANOTIFY_CONF2_CASE2
> +
> EndLog
> \ No newline at end of file
> diff --git a/uefi-sct/EMS/Bin/TestCase/IP6Config/UnregisterDataNotify.Func1.Case1.tcl b/uefi-sct/EMS/Bin/TestCase/IP6Config/UnregisterDataNotify.Func1.Case1.tcl
> index 5b88510..6315fa7 100644
> --- a/uefi-sct/EMS/Bin/TestCase/IP6Config/UnregisterDataNotify.Func1.Case1.tcl
> +++ b/uefi-sct/EMS/Bin/TestCase/IP6Config/UnregisterDataNotify.Func1.Case1.tcl
> @@ -1,98 +1,98 @@
> -#
> -# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
> -# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
> -#
> -# This program and the accompanying materials
> -# are licensed and made available under the terms and conditions of the BSD License
> -# which accompanies this distribution. The full text of the license may be found at
> -# http://opensource.org/licenses/bsd-license.php
> -#
> -# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> -# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
> -#
> -################################################################################
> -CaseLevel FUNCTION
> -CaseAttribute AUTO
> -CaseVerboseLevel DEFAULT
> -set reportfile report.csv
> -
> -#
> -# test case Name, category, description, GUID...
> -#
> -CaseGuid 769658B4-3397-4367-8E10-C4513407FFB8
> -CaseName UnregisterDataNotify.Func1.Case1
> -CaseCategory IP6Config
> -CaseDescription {UnregisterDataNotify must succeed with valid parameters when handling signal datatype.}
> -
> -################################################################################
> -Include IP6Config/Include/Ip6Config.inc.tcl
> -
> -
> -#
> -# Begin log ...
> -#
> -BeginLog
> -
> -#
> -# BeginScope
> -#
> -BeginScope _IP6CONFIG_UNREGISTERDATANOTIFY_FUNC1_CASE1
> -
> -#
> -# Parameter Definition
> -# R_ represents "Remote EFI Side Parameter"
> -# L_ represents "Local ENTS Side Parameter"
> -#
> -UINTN R_Status
> -UINTN R_Context
> -UINTN R_DoneEvent
> -UINTN R_Ip6ConfigDataSize
> -UINT32 R_Ip6ConfigDataType
> -EFI_IP6_CONFIG_INTERFACE_INFO R_Ip6ConfigInterfaceInfo
> -EFI_IP6_CONFIG_INTERFACE_ID R_Ip6ConfigInterfaceId
> -UINT32 R_Ip6ConfigPolicy
> -EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS R_Ip6ConfigDadTransmits
> -
> -#
> -# Create Event and RegisterDataNotify
> -#
> -SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> -SetVar R_Ip6ConfigDataSize [Sizeof UINT32]
> -SetVar R_Ip6ConfigPolicy $IP6CP(Manual)
> -
> -SetVar R_Context 0
> -BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context,\
> - &@R_DoneEvent, &@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "BS.CreateEvent." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType, @R_DoneEvent ,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "IfConfig6.RegisterDataNotify() with valid parameter." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -#
> -# Check Point : Call Ip6Config->UnregisterDataNotify with valid parameter
> -#
> -SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> -Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $Ip6ConfigUnregisterDataNotifyFunc1AssertionGuid001 \
> - "Ip6Config.UnregisterDataNotify - Unregister notification event for configuration." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -#
> -# Close event
> -#
> -BS->CloseEvent {@R_DoneEvent,&@R_Status}
> -GetAck
> -
> -EndScope _IP6CONFIG_UNREGISTERDATANOTIFY_FUNC1_CASE1
> -
> +#
> +# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
> +# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
> +#
> +# This program and the accompanying materials
> +# are licensed and made available under the terms and conditions of the BSD License
> +# which accompanies this distribution. The full text of the license may be found at
> +# http://opensource.org/licenses/bsd-license.php
> +#
> +# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> +# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
> +#
> +################################################################################
> +CaseLevel FUNCTION
> +CaseAttribute AUTO
> +CaseVerboseLevel DEFAULT
> +set reportfile report.csv
> +
> +#
> +# test case Name, category, description, GUID...
> +#
> +CaseGuid 769658B4-3397-4367-8E10-C4513407FFB8
> +CaseName UnregisterDataNotify.Func1.Case1
> +CaseCategory IP6Config
> +CaseDescription {UnregisterDataNotify must succeed with valid parameters when handling signal datatype.}
> +
> +################################################################################
> +Include IP6Config/Include/Ip6Config.inc.tcl
> +
> +
> +#
> +# Begin log ...
> +#
> +BeginLog
> +
> +#
> +# BeginScope
> +#
> +BeginScope _IP6CONFIG_UNREGISTERDATANOTIFY_FUNC1_CASE1
> +
> +#
> +# Parameter Definition
> +# R_ represents "Remote EFI Side Parameter"
> +# L_ represents "Local ENTS Side Parameter"
> +#
> +UINTN R_Status
> +UINTN R_Context
> +UINTN R_DoneEvent
> +UINTN R_Ip6ConfigDataSize
> +UINT32 R_Ip6ConfigDataType
> +EFI_IP6_CONFIG_INTERFACE_INFO R_Ip6ConfigInterfaceInfo
> +EFI_IP6_CONFIG_INTERFACE_ID R_Ip6ConfigInterfaceId
> +UINT32 R_Ip6ConfigPolicy
> +EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS R_Ip6ConfigDadTransmits
> +
> +#
> +# Create Event and RegisterDataNotify
> +#
> +SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> +SetVar R_Ip6ConfigDataSize [Sizeof UINT32]
> +SetVar R_Ip6ConfigPolicy $IP6CP(Manual)
> +
> +SetVar R_Context 0
> +BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context,\
> + &@R_DoneEvent, &@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "BS.CreateEvent." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType, @R_DoneEvent ,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "IfConfig6.RegisterDataNotify() with valid parameter." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +#
> +# Check Point : Call Ip6Config->UnregisterDataNotify with valid parameter
> +#
> +SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> +Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $Ip6ConfigUnregisterDataNotifyFunc1AssertionGuid001 \
> + "Ip6Config.UnregisterDataNotify - Unregister notification event for configuration." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +#
> +# Close event
> +#
> +BS->CloseEvent {@R_DoneEvent,&@R_Status}
> +GetAck
> +
> +EndScope _IP6CONFIG_UNREGISTERDATANOTIFY_FUNC1_CASE1
> +
> EndLog
> \ No newline at end of file
> diff --git a/uefi-sct/EMS/Bin/TestCase/IP6Config/UnregisterDataNotify.Func1.Case2.tcl b/uefi-sct/EMS/Bin/TestCase/IP6Config/UnregisterDataNotify.Func1.Case2.tcl
> index 9f30136..cf1a374 100644
> --- a/uefi-sct/EMS/Bin/TestCase/IP6Config/UnregisterDataNotify.Func1.Case2.tcl
> +++ b/uefi-sct/EMS/Bin/TestCase/IP6Config/UnregisterDataNotify.Func1.Case2.tcl
> @@ -1,237 +1,237 @@
> -#
> -# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
> -# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
> -#
> -# This program and the accompanying materials
> -# are licensed and made available under the terms and conditions of the BSD License
> -# which accompanies this distribution. The full text of the license may be found at
> -# http://opensource.org/licenses/bsd-license.php
> -#
> -# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> -# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
> -#
> -################################################################################
> -CaseLevel FUNCTION
> -CaseAttribute AUTO
> -CaseVerboseLevel DEFAULT
> -set reportfile report.csv
> -
> -#
> -# test case Name, category, description, GUID...
> -#
> -CaseGuid C206AA15-2F53-4860-BD78-453C4EA463B6
> -CaseName UnregisterDataNotify.Func1.Case2
> -CaseCategory IP6Config
> -CaseDescription {UnregisterDataNotify must succeed with valid parameters when handling multiple datatype.}
> -
> -################################################################################
> -Include IP6Config/Include/Ip6Config.inc.tcl
> -
> -
> -#
> -# Begin log ...
> -#
> -BeginLog
> -
> -#
> -# BeginScope
> -#
> -BeginScope _IP6CONFIG_UNREGISTERDATANOTIFY_FUNC1_CASE2
> -
> -#
> -# Parameter Definition
> -# R_ represents "Remote EFI Side Parameter"
> -# L_ represents "Local ENTS Side Parameter"
> -#
> -UINTN R_Status
> -UINTN R_Context
> -UINTN R_DoneEvent
> -UINTN R_Ip6ConfigDataSize
> -UINT32 R_Ip6ConfigDataType
> -EFI_IP6_CONFIG_INTERFACE_INFO R_Ip6ConfigInterfaceInfo
> -EFI_IP6_CONFIG_INTERFACE_ID R_Ip6ConfigInterfaceId
> -UINT32 R_Ip6ConfigPolicy
> -EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS R_Ip6ConfigDadTransmits
> -
> -#
> -# Check Point: Create Event and register it with data type [Policy] and [DadXmits]
> -#
> -SetVar R_Context 0
> -BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context,\
> - &@R_DoneEvent, &@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "BS.CreateEvent." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> -SetVar R_Ip6ConfigDataSize [Sizeof UINT32]
> -SetVar R_Ip6ConfigPolicy $IP6CP(Manual)
> -
> -Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.RegisterDataNotify - Register notification event for configuration." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> -SetVar R_Ip6ConfigDataSize [Sizeof EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS]
> -SetVar R_Ip6ConfigDadTransmits.DupAddrDetectTransmits 3
> -
> -Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.RegisterDataNotify - Register notification event for configuration." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -#
> -# Check Point: Unregister the event on Datatype [Policy]
> -#
> -SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> -SetVar R_Ip6ConfigDataSize [Sizeof UINT32]
> -SetVar R_Ip6ConfigPolicy $IP6CP(Manual)
> -
> -Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $Ip6ConfigUnregisterDataNotifyFunc1AssertionGuid002 \
> - "Ip6Config.UnregisterDataNotify - Unregister notification event for Datatype - Policy." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -#
> -# Check Point: Call Ip6Cofnig->SetData to set [Policy] and check whether the event is signaled.
> -#
> -SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> -SetVar R_Ip6ConfigDataSize [Sizeof UINT32]
> -SetVar R_Ip6ConfigPolicy $IP6CP(Manual)
> -
> -GetVar R_Context
> -set L_Context1 $R_Context
> -set L_Context2 $L_Context1
> -
> -Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_Status"
> -GetAck
> -GetVar R_Status
> -if { $R_Status == $EFI_SUCCESS } {
> - Stall 5
> - GetVar R_Context
> - if { $R_Context == $L_Context2 } {
> - set assert pass
> - } else {
> - set assert fail
> - }
> - RecordAssertion $assert $Ip6ConfigRegisterDataNotifyFunc1AssertionGuid003 \
> - "Ip6Config.UnregisterDataNotify - Event should not be signaled for DataType - Policy."
> -} else {
> - set assert fail
> -
> - RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.SetData - Call SetData to set manual policy." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> - SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - EndScope _IP6CONFIG_UNREGISTERDATANOTIFY_FUNC1_CASE2
> - EndLog
> - return
> -}
> -
> -#
> -# Check Point: Call Ip6Config->SetData to set [DadXmits] and check whether the event is signaled.
> -#
> -SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> -SetVar R_Ip6ConfigDataSize [Sizeof EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS]
> -SetVar R_Ip6ConfigDadTransmits.DupAddrDetectTransmits 3
> -
> -GetVar R_Context
> -set L_Context1 $R_Context
> -set L_Context2 [expr { $L_Context1 + 1 }]
> -
> -Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigDadTransmits,&@R_Status"
> -GetAck
> -GetVar R_Status
> -
> -if { $R_Status == $EFI_SUCCESS } {
> - set assert pass
> - RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.SetData - Call SetData to set DadXmits." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -} elseif { $R_Status == $EFI_NOT_READY } {
> - set i 0
> - set L_TimeOut 30
> - while { 1 > 0 } {
> - GetVar R_Context
> - if { $R_Context == $L_Context2 } {
> - break
> - } elseif { $i == $L_TimeOut } {
> - set assert fail
> - RecordAssertion $assert $GenericAssertionGuid \
> - "SetData failed.(event hasn't been signaled before TIMEOUT)." \
> - "TIMEOUT value is $L_TimeOut (sec), "
> -
> - SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - EndScope _IP6CONFIG_UNREGISTERDATANOTIFY_FUNC1_CASE2
> - EndLog
> - return
> - }
> - incr i
> - Stall 1
> - }
> -} else {
> - set assert fail
> - RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.SetData - Call SetData to set DadXmits." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> - SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - EndScope _IP6CONFIG_UNREGISTERDATANOTIFY_FUNC1_CASE2
> - EndLog
> - return
> -}
> -
> -GetVar R_Context
> -if { $R_Context == $L_Context2 } {
> - set assert pass
> -} else {
> - set assert fail
> -}
> -RecordAssertion $assert $Ip6ConfigRegisterDataNotifyFunc1AssertionGuid004 \
> - "Ip6Config.RegisterDataNotify - Event should be signaled for DataType - DadXmits."
> -
> -#
> -# Clean up
> -#
> -SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> -Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.UnregisterDataNotify - Unregister notification event for configuration." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -BS->CloseEvent {@R_DoneEvent,&@R_Status}
> -GetAck
> -
> -EndScope _IP6CONFIG_UNREGISTERDATANOTIFY_FUNC1_CASE2
> -
> +#
> +# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
> +# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
> +#
> +# This program and the accompanying materials
> +# are licensed and made available under the terms and conditions of the BSD License
> +# which accompanies this distribution. The full text of the license may be found at
> +# http://opensource.org/licenses/bsd-license.php
> +#
> +# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> +# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
> +#
> +################################################################################
> +CaseLevel FUNCTION
> +CaseAttribute AUTO
> +CaseVerboseLevel DEFAULT
> +set reportfile report.csv
> +
> +#
> +# test case Name, category, description, GUID...
> +#
> +CaseGuid C206AA15-2F53-4860-BD78-453C4EA463B6
> +CaseName UnregisterDataNotify.Func1.Case2
> +CaseCategory IP6Config
> +CaseDescription {UnregisterDataNotify must succeed with valid parameters when handling multiple datatype.}
> +
> +################################################################################
> +Include IP6Config/Include/Ip6Config.inc.tcl
> +
> +
> +#
> +# Begin log ...
> +#
> +BeginLog
> +
> +#
> +# BeginScope
> +#
> +BeginScope _IP6CONFIG_UNREGISTERDATANOTIFY_FUNC1_CASE2
> +
> +#
> +# Parameter Definition
> +# R_ represents "Remote EFI Side Parameter"
> +# L_ represents "Local ENTS Side Parameter"
> +#
> +UINTN R_Status
> +UINTN R_Context
> +UINTN R_DoneEvent
> +UINTN R_Ip6ConfigDataSize
> +UINT32 R_Ip6ConfigDataType
> +EFI_IP6_CONFIG_INTERFACE_INFO R_Ip6ConfigInterfaceInfo
> +EFI_IP6_CONFIG_INTERFACE_ID R_Ip6ConfigInterfaceId
> +UINT32 R_Ip6ConfigPolicy
> +EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS R_Ip6ConfigDadTransmits
> +
> +#
> +# Check Point: Create Event and register it with data type [Policy] and [DadXmits]
> +#
> +SetVar R_Context 0
> +BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context,\
> + &@R_DoneEvent, &@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "BS.CreateEvent." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> +SetVar R_Ip6ConfigDataSize [Sizeof UINT32]
> +SetVar R_Ip6ConfigPolicy $IP6CP(Manual)
> +
> +Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.RegisterDataNotify - Register notification event for configuration." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> +SetVar R_Ip6ConfigDataSize [Sizeof EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS]
> +SetVar R_Ip6ConfigDadTransmits.DupAddrDetectTransmits 3
> +
> +Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.RegisterDataNotify - Register notification event for configuration." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +#
> +# Check Point: Unregister the event on Datatype [Policy]
> +#
> +SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> +SetVar R_Ip6ConfigDataSize [Sizeof UINT32]
> +SetVar R_Ip6ConfigPolicy $IP6CP(Manual)
> +
> +Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $Ip6ConfigUnregisterDataNotifyFunc1AssertionGuid002 \
> + "Ip6Config.UnregisterDataNotify - Unregister notification event for Datatype - Policy." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +#
> +# Check Point: Call Ip6Cofnig->SetData to set [Policy] and check whether the event is signaled.
> +#
> +SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> +SetVar R_Ip6ConfigDataSize [Sizeof UINT32]
> +SetVar R_Ip6ConfigPolicy $IP6CP(Manual)
> +
> +GetVar R_Context
> +set L_Context1 $R_Context
> +set L_Context2 $L_Context1
> +
> +Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_Status"
> +GetAck
> +GetVar R_Status
> +if { $R_Status == $EFI_SUCCESS } {
> + Stall 5
> + GetVar R_Context
> + if { $R_Context == $L_Context2 } {
> + set assert pass
> + } else {
> + set assert fail
> + }
> + RecordAssertion $assert $Ip6ConfigRegisterDataNotifyFunc1AssertionGuid003 \
> + "Ip6Config.UnregisterDataNotify - Event should not be signaled for DataType - Policy."
> +} else {
> + set assert fail
> +
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.SetData - Call SetData to set manual policy." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> + SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_UNREGISTERDATANOTIFY_FUNC1_CASE2
> + EndLog
> + return
> +}
> +
> +#
> +# Check Point: Call Ip6Config->SetData to set [DadXmits] and check whether the event is signaled.
> +#
> +SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> +SetVar R_Ip6ConfigDataSize [Sizeof EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS]
> +SetVar R_Ip6ConfigDadTransmits.DupAddrDetectTransmits 3
> +
> +GetVar R_Context
> +set L_Context1 $R_Context
> +set L_Context2 [expr { $L_Context1 + 1 }]
> +
> +Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigDadTransmits,&@R_Status"
> +GetAck
> +GetVar R_Status
> +
> +if { $R_Status == $EFI_SUCCESS } {
> + set assert pass
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.SetData - Call SetData to set DadXmits." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +} elseif { $R_Status == $EFI_NOT_READY } {
> + set i 0
> + set L_TimeOut 30
> + while { 1 > 0 } {
> + GetVar R_Context
> + if { $R_Context == $L_Context2 } {
> + break
> + } elseif { $i == $L_TimeOut } {
> + set assert fail
> + RecordAssertion $assert $GenericAssertionGuid \
> + "SetData failed.(event hasn't been signaled before TIMEOUT)." \
> + "TIMEOUT value is $L_TimeOut (sec), "
> +
> + SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_UNREGISTERDATANOTIFY_FUNC1_CASE2
> + EndLog
> + return
> + }
> + incr i
> + Stall 1
> + }
> +} else {
> + set assert fail
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.SetData - Call SetData to set DadXmits." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> + SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_UNREGISTERDATANOTIFY_FUNC1_CASE2
> + EndLog
> + return
> +}
> +
> +GetVar R_Context
> +if { $R_Context == $L_Context2 } {
> + set assert pass
> +} else {
> + set assert fail
> +}
> +RecordAssertion $assert $Ip6ConfigRegisterDataNotifyFunc1AssertionGuid004 \
> + "Ip6Config.RegisterDataNotify - Event should be signaled for DataType - DadXmits."
> +
> +#
> +# Clean up
> +#
> +SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> +Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.UnregisterDataNotify - Unregister notification event for configuration." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +BS->CloseEvent {@R_DoneEvent,&@R_Status}
> +GetAck
> +
> +EndScope _IP6CONFIG_UNREGISTERDATANOTIFY_FUNC1_CASE2
> +
> EndLog
> \ No newline at end of file
_______________________________________________
edk2-devel mailing list
edk2-devel@lists.01.org
https://lists.01.org/mailman/listinfo/edk2-devel
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [edk2-test][Patch] uefi-sct/EMS:Add the checkpoint for SetData
2018-10-12 8:20 [edk2-test][Patch] uefi-sct/EMS:Add the checkpoint for SetData Eric Jin
2018-10-12 8:57 ` Supreeth Venkatesh
@ 2018-10-13 1:55 ` Wu, Jiaxin
1 sibling, 0 replies; 4+ messages in thread
From: Wu, Jiaxin @ 2018-10-13 1:55 UTC (permalink / raw)
To: Jin, Eric, edk2-devel@lists.01.org
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
> -----Original Message-----
> From: edk2-devel [mailto:edk2-devel-bounces@lists.01.org] On Behalf Of Eric
> Jin
> Sent: Friday, October 12, 2018 4:20 PM
> To: edk2-devel@lists.01.org
> Subject: [edk2] [edk2-test][Patch] uefi-sct/EMS:Add the checkpoint for SetData
>
> Spec clarifies the configuration clearance behavior
> Correct the end line
>
> Contributed-under: TianoCore Contribution Agreement 1.1
> Signed-off-by: Eric Jin <eric.jin@intel.com>
> Cc: Supreeth Venkatesh <supreeth.venkatesh@arm.com>
> ---
> .../IP4Config2/Include/Ip4Config2AssertionGuid.tcl | 5 +-
> .../TestCase/IP4Config2/SetData.Func1.Case2.tcl | 714 +++++++++++++
> .../Bin/TestCase/IP6Config/GetData.Conf1.Case1.tcl | 142 +--
> .../Bin/TestCase/IP6Config/GetData.Conf2.Case1.tcl | 140 +--
> .../Bin/TestCase/IP6Config/GetData.Conf3.Case1.tcl | 788 +++++++-------
> .../Bin/TestCase/IP6Config/GetData.Conf4.Case1.tcl | 144 +--
> .../Bin/TestCase/IP6Config/GetData.Conf5.Case1.tcl | 982 +++++++++---------
> .../Bin/TestCase/IP6Config/GetData.Func1.Case1.tcl | 542 +++++-----
> .../TestCase/IP6Config/Include/Ip6Config.inc.tcl | 192 ++--
> .../TestCase/IP6Config/Include/Ip6Config.proc.tcl | 30 +-
> .../IP6Config/Include/Ip6ConfigAssertionGuid.tcl | 180 ++--
> .../TestCase/IP6Config/Include/Ip6ConfigDefine.tcl | 102 +-
> .../IP6Config/RegisterDataNotify.Conf1.Case1.tcl | 178 ++--
> .../IP6Config/RegisterDataNotify.Conf2.Case1.tcl | 178 ++--
> .../IP6Config/RegisterDataNotify.Conf3.Case1.tcl | 216 ++--
> .../IP6Config/RegisterDataNotify.Func1.Case1.tcl | 1076 ++++++++++----------
> .../IP6Config/RegisterDataNotify.Func1.Case2.tcl | 530 +++++-----
> .../Bin/TestCase/IP6Config/SetData.Conf1.Case1.tcl | 142 +--
> .../Bin/TestCase/IP6Config/SetData.Conf2.Case1.tcl | 596 +++++------
> .../Bin/TestCase/IP6Config/SetData.Conf3.Case1.tcl | 142 +--
> .../Bin/TestCase/IP6Config/SetData.Conf4.Case1.tcl | 474 ++++-----
> .../Bin/TestCase/IP6Config/SetData.Conf5.Case1.tcl | 556 +++++-----
> .../Bin/TestCase/IP6Config/SetData.Conf6.Case1.tcl | 142 +--
> .../Bin/TestCase/IP6Config/SetData.Conf7.Case1.tcl | 1020 +++++++++----------
> .../Bin/TestCase/IP6Config/SetData.Func1.Case1.tcl | 546 +++++-----
> .../Bin/TestCase/IP6Config/SetData.Func2.Case1.tcl | 838 +++++++++++++++
> .../IP6Config/UnregisterDataNotify.Conf1.Case1.tcl | 178 ++--
> .../IP6Config/UnregisterDataNotify.Conf2.Case1.tcl | 164 +--
> .../IP6Config/UnregisterDataNotify.Conf2.Case2.tcl | 196 ++--
> .../IP6Config/UnregisterDataNotify.Func1.Case1.tcl | 194 ++--
> .../IP6Config/UnregisterDataNotify.Func1.Case2.tcl | 472 ++++-----
> 31 files changed, 6683 insertions(+), 5116 deletions(-)
> create mode 100644 uefi-
> sct/EMS/Bin/TestCase/IP4Config2/SetData.Func1.Case2.tcl
> create mode 100644 uefi-
> sct/EMS/Bin/TestCase/IP6Config/SetData.Func2.Case1.tcl
>
> diff --git a/uefi-
> sct/EMS/Bin/TestCase/IP4Config2/Include/Ip4Config2AssertionGuid.tcl b/uefi-
> sct/EMS/Bin/TestCase/IP4Config2/Include/Ip4Config2AssertionGuid.tcl
> index 91a4fd1..e0604b2 100644
> --- a/uefi-
> sct/EMS/Bin/TestCase/IP4Config2/Include/Ip4Config2AssertionGuid.tcl
> +++ b/uefi-
> sct/EMS/Bin/TestCase/IP4Config2/Include/Ip4Config2AssertionGuid.tcl
> @@ -1,6 +1,6 @@
> #
> # Copyright 2017 Unified EFI, Inc.<BR>
> -# Copyright (c) 2017, Intel Corporation. All rights reserved.<BR>
> +# Copyright (c) 2017 - 2018, Intel Corporation. All rights reserved.<BR>
> #
> # This program and the accompanying materials
> # are licensed and made available under the terms and conditions of the BSD
> License
> @@ -39,6 +39,9 @@ set Ip4Config2SetDataFunc1AssertionGuid008 00FBB58A-
> 4BB3-499F-AE6B-744B6B9932E6
> set Ip4Config2SetDataFunc1AssertionGuid009 DB8EF05C-085F-45D1-A0B1-
> DC2F307B6F1E
> set Ip4Config2SetDataFunc1AssertionGuid010 29143621-896C-4FB9-9E70-
> 7A4D2DA6BEE0
> set Ip4Config2SetDataFunc1AssertionGuid011 72FEDF83-6755-4212-AF0F-
> 780F457EFAA7
> +set Ip4Config2SetDataFunc1AssertionGuid012 EB7769D1-A31F-4F37-86F3-
> 2BBF54834785
> +set Ip4Config2SetDataFunc1AssertionGuid013 78F3A664-A8E4-43B8-961F-
> 71033E9145F2
> +set Ip4Config2SetDataFunc1AssertionGuid014 7F717D50-3A7C-4E2A-9F15-
> 0A802E9BAFE6
>
> #
> # Guid for GetData() interface
> diff --git a/uefi-sct/EMS/Bin/TestCase/IP4Config2/SetData.Func1.Case2.tcl
> b/uefi-sct/EMS/Bin/TestCase/IP4Config2/SetData.Func1.Case2.tcl
> new file mode 100644
> index 0000000..0517032
> --- /dev/null
> +++ b/uefi-sct/EMS/Bin/TestCase/IP4Config2/SetData.Func1.Case2.tcl
> @@ -0,0 +1,714 @@
> +#
> +# Copyright (c) 2018, Intel Corporation. All rights reserved.<BR>
> +#
> +# This program and the accompanying materials
> +# are licensed and made available under the terms and conditions of the BSD
> License
> +# which accompanies this distribution. The full text of the license may be
> found at
> +# http://opensource.org/licenses/bsd-license.php
> +#
> +# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS"
> BASIS,
> +# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER
> EXPRESS OR IMPLIED.
> +#
> +################################################################
> ################
> +CaseLevel FUNCTION
> +CaseAttribute AUTO
> +CaseVerboseLevel DEFAULT
> +set reportfile report.csv
> +
> +#
> +# test case Name, category, description, GUID...
> +#
> +CaseGuid B2AD20DF-2325-42B2-A199-A49ADF04A5DD
> +CaseName SetData.Func1.Case2
> +CaseCategory IP4Config2
> +CaseDescription {SetData must succeed When DataSize is 0 and
> + Data is NULL,and existing configuration is cleared.}
> +
> +################################################################
> ################
> +Include IP4Config2/Include/Ip4Config2.inc.tcl
> +
> +
> +#
> +# Begin log ...
> +#
> +BeginLog
> +
> +#
> +# BeginScope
> +#
> +BeginScope _IP4CONFIG2_SETDATA_FUNC1_CASE2
> +
> +#
> +# Parameter Definition
> +# R_ represents "Remote EFI Side Parameter"
> +# L_ represents "Local ENTS Side Parameter"
> +#
> +#
> +# Parameter Definition
> +# R_ represents "Remote EFI Side Parameter"
> +# L_ represents "Local ENTS Side Parameter"
> +#
> +UINTN R_Status
> +UINTN R_Context
> +UINTN R_DoneEvent
> +UINTN R_Ip4Config2DataSize
> +UINT32 R_Ip4Config2DataType
> +UINT32 R_Ip4Config2Policy
> +
> +#
> +# Check Point: Call Ip4Config2->SetData to set Static policy
> +#
> +SetVar R_Ip4Config2DataType $IP4C2DT(Policy)
> +SetVar R_Ip4Config2DataSize [Sizeof UINT32]
> +SetVar R_Ip4Config2Policy $IP4C2P(Static)
> +
> +SetVar R_Context 0
> +BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1,
> &@R_Context,\
> + &@R_DoneEvent, &@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "BS.CreateEvent." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +Ip4Config2->RegisterDataNotify
> "@R_Ip4Config2DataType,@R_DoneEvent,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip4Config2.RegisterDataNotify - Register notification event for
> configuration." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +Ip4Config2->SetData
> "@R_Ip4Config2DataType,@R_Ip4Config2DataSize,&@R_Ip4Config2Policy,&@
> R_Status"
> +GetAck
> +GetVar R_Status
> +if { $R_Status == $EFI_SUCCESS } {
> + set assert pass
> + RecordAssertion $assert $Ip4Config2SetDataFunc1AssertionGuid001 \
> + "Ip4Config2.SetData - Call SetData to set Static policy." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +} elseif { $R_Status == $EFI_NOT_READY } {
> + set i 0
> + set L_TimeOut 30
> + while { 1 > 0 } {
> + GetVar R_Context
> + if { $R_Context == 1 } {
> + break
> + } elseif { $i == $L_TimeOut } {
> + set assert fail
> + RecordAssertion $assert $Ip4Config2SetDataFunc1AssertionGuid001 \
> + "SetData failed.(event hasn't been signaled before TIMEOUT)." \
> + "TIMEOUT value is $L_TimeOut (sec), "
> + SetVar R_Ip4Config2DataType $IP4C2DT(Policy)
> + Ip4Config2->UnregisterDataNotify
> "@R_Ip4Config2DataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP4CONFIG2_SETDATA_FUNC1_CASE2
> + EndLog
> + return
> + }
> + incr i
> + Stall 1
> + }
> +} else {
> + set assert fail
> + RecordAssertion $assert $Ip4Config2SetDataFunc1AssertionGuid001 \
> + "Ip4Config2.SetData - Call SetData to set Static policy." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> + SetVar R_Ip4Config2DataType $IP4C2DT(Policy)
> + Ip4Config2->UnregisterDataNotify
> "@R_Ip4Config2DataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP4CONFIG2_SETDATA_FUNC1_CASE2
> + EndLog
> + return
> +}
> +
> +
> +Ip4Config2->GetData
> "@R_Ip4Config2DataType,&@R_Ip4Config2DataSize,&@R_Ip4Config2Policy,&
> @R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip4Config2.GetData - Call GetData to get policy value." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +GetVar R_Ip4Config2Policy
> +if { $R_Ip4Config2Policy == $IP4C2P(Static) } {
> + set assert pass
> +} else {
> + set assert fail
> +
> + RecordAssertion $assert $Ip4Config2SetDataFunc1AssertionGuid002 \
> + "Set Static policy succeeds(event is signaled correctly and data
> correct)."
> + SetVar R_Ip4Config2Policy $IP4C2DT(Policy)
> + Ip4Config2->UnregisterDataNotify
> "@R_Ip4Config2DataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP4CONFIG2_SETDATA_FUNC1_CASE2
> + EndLog
> + return
> +}
> +
> +Ip4Config2->UnregisterDataNotify
> "@R_Ip4Config2DataType,@R_DoneEvent,&@R_Status"
> +GetAck
> +RecordAssertion $assert $Ip4Config2SetDataFunc1AssertionGuid002 \
> + "Set Static policy succeeds(event is signaled correctly and data
> correct)."
> +
> +#
> +# Check Point : Set Manual Address
> +#
> +EFI_IP4_CONFIG2_MANUAL_ADDRESS R_Temp_Ip4Config2ManualAddress
> +EFI_IP4_CONFIG2_MANUAL_ADDRESS R_Ip4Config2ManualAddress
> +SetVar R_Ip4Config2DataType $IP4C2DT(ManualAddress)
> +SetVar R_Ip4Config2DataSize [Sizeof EFI_IP4_CONFIG2_MANUAL_ADDRESS]
> +SetIpv4Address R_Temp_Ip4Config2ManualAddress.Address "10.239.9.15"
> +SetIpv4Address R_Temp_Ip4Config2ManualAddress.SubnetMask
> "255.255.255.0"
> +SetVar R_Ip4Config2ManualAddress @R_Temp_Ip4Config2ManualAddress
> +
> +SetVar R_Context 0
> +Ip4Config2->RegisterDataNotify
> "@R_Ip4Config2DataType,@R_DoneEvent,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip4Config2.RegisterDataNotify - Register notification event for
> configuration." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +
> +Ip4Config2->SetData
> "@R_Ip4Config2DataType,@R_Ip4Config2DataSize,&@R_Ip4Config2ManualAd
> dress,&@R_Status"
> +GetAck
> +GetVar R_Status
> +
> +if { $R_Status == $EFI_SUCCESS } {
> + set assert pass
> + RecordAssertion $assert $Ip4Config2SetDataFunc1AssertionGuid003 \
> + "Ip4Config2.SetData - Call SetData to set Manual Address." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +} elseif { $R_Status == $EFI_NOT_READY } {
> + set i 0
> + set L_TimeOut 30
> + while { 1 > 0 } {
> + GetVar R_Context
> + if { $R_Context == 1 } {
> + break
> + } elseif { $i == $L_TimeOut } {
> + set assert fail
> + RecordAssertion $assert $Ip4Config2SetDataFunc1AssertionGuid003 \
> + "SetData failed.(event hasn't been signaled before TIMEOUT)." \
> + "TIMEOUT value is $L_TimeOut (sec), "
> + SetVar R_Ip4Config2DataType $IP4C2DT(ManualAddress)
> + Ip4Config2->UnregisterDataNotify
> "@R_Ip4Config2DataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP4CONFIG2_SETDATA_FUNC1_CASE2
> + EndLog
> + return
> + }
> + incr i
> + Stall 1
> + }
> +} else {
> + set assert fail
> + RecordAssertion $assert $Ip4Config2SetDataFunc1AssertionGuid003 \
> + "IP4Config2.SetData - Call SetData to set Manual Address." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> + SetVar R_Ip4Config2DataType $IP4C2DT(ManualAddress)
> + Ip4Config2->UnregisterDataNotify
> "@R_Ip4Config2DataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP4CONFIG2_SETDATA_FUNC1_CASE2
> + EndLog
> + return
> +}
> +
> +
> +Ip4Config2->GetData
> "@R_Ip4Config2DataType,&@R_Ip4Config2DataSize,&@R_Ip4Config2ManualA
> ddress,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip4Config2.GetData - Call GetData to get Manual Address." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +
> +EFI_IPv4_ADDRESS R_Addr1
> +EFI_IPv4_ADDRESS R_Addr2
> +set R_Addr1 [GetIpv4Address R_Ip4Config2ManualAddress.Address]
> +puts "R_Addr1 - $R_Addr1"
> +set R_Addr2 [GetIpv4Address R_Ip4Config2ManualAddress.SubnetMask]
> +puts "R_Addr1 - $R_Addr2"
> +
> +if {[string compare -nocase $R_Addr1 10.239.9.15] == 0} {
> + if {[string compare -nocase $R_Addr2 255.255.255.0] == 0} {
> + set assert pass
> + } else {
> + set assert fail
> + RecordAssertion $assert $Ip4Config2SetDataFunc1AssertionGuid004 \
> + "Set ManualAddress succeeds(event is signaled correctly and data
> correct)."
> + Ip4Config2->UnregisterDataNotify
> "@R_Ip4Config2DataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP4CONFIG2_SETDATA_FUNC1_CASE2
> + EndLog
> + return
> + }
> +} else {
> + set assert fail
> +
> + RecordAssertion $assert $Ip4Config2SetDataFunc1AssertionGuid004 \
> + "Set ManualAddress succeeds(event is signaled correctly and data
> correct)."
> + Ip4Config2->UnregisterDataNotify
> "@R_Ip4Config2DataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP4CONFIG2_SETDATA_FUNC1_CASE2
> + EndLog
> + return
> +}
> +
> +Ip4Config2->UnregisterDataNotify
> "@R_Ip4Config2DataType,@R_DoneEvent,&@R_Status"
> +GetAck
> +RecordAssertion $assert $Ip4Config2SetDataFunc1AssertionGuid004 \
> + "Set ManualAddress succeeds(event is signaled correctly and data
> correct)."
> +
> +#
> +# Check Points : Set Gateway
> +#
> +EFI_IPv4_ADDRESS R_Ip4Config2Gateway
> +SetVar R_Ip4Config2DataType $IP4C2DT(Gateway)
> +SetVar R_Ip4Config2DataSize [Sizeof EFI_IPv4_ADDRESS]
> +SetIpv4Address R_Ip4Config2Gateway "10.239.9.241"
> +
> +SetVar R_Context 0
> +Ip4Config2->RegisterDataNotify
> "@R_Ip4Config2DataType,@R_DoneEvent,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip4Config2.RegisterDataNotify - Register notification event for
> configuration." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +Ip4Config2->SetData
> "@R_Ip4Config2DataType,@R_Ip4Config2DataSize,&@R_Ip4Config2Gateway,
> &@R_Status"
> +GetAck
> +GetVar R_Status
> +
> +if { $R_Status == $EFI_SUCCESS } {
> + set assert pass
> + RecordAssertion $assert $Ip4Config2SetDataFunc1AssertionGuid005 \
> + "Ip4Config2.SetData - Call SetData to set Gateway Address." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +} elseif { $R_Status == $EFI_NOT_READY } {
> + set i 0
> + set L_TimeOut 30
> + while { 1 > 0 } {
> + GetVar R_Context
> + if { $R_Context == 1 } {
> + break
> + } elseif { $i == $L_TimeOut } {
> + set assert fail
> + RecordAssertion $assert $Ip4Config2SetDataFunc1AssertionGuid005 \
> + "SetData failed.(event hasn't been signaled before TIMEOUT)." \
> + "TIMEOUT value is $L_TimeOut (sec), "
> + Ip4Config2->UnregisterDataNotify
> "@R_Ip4Config2DataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP4CONFIG2_SETDATA_FUNC1_CASE2
> + EndLog
> + return
> + }
> + incr i
> + Stall 1
> + }
> +} else {
> + set assert fail
> + RecordAssertion $assert $Ip4Config2SetDataFunc1AssertionGuid005 \
> + "Ip4Config2.SetData - Call SetData to set Gateway Address." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> + Ip4Config2->UnregisterDataNotify
> "@R_Ip4Config2DataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP4CONFIG2_SETDATA_FUNC1_CASE2
> + EndLog
> + return
> +}
> +
> +
> +Ip4Config2->GetData
> "@R_Ip4Config2DataType,&@R_Ip4Config2DataSize,&@R_Ip4Config2Gateway
> ,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip4Config2.GetData - Call GetData to get Gateway Address."
> \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +EFI_IPv4_ADDRESS R_Addr3
> +set R_Addr3 [GetIpv4Address R_Ip4Config2Gateway]
> +puts "R_Addr3 - $R_Addr3"
> +
> +if {[string compare -nocase $R_Addr3 10.239.9.241] == 0} {
> + set assert pass
> +} else {
> + set assert fail
> +
> + RecordAssertion $assert $Ip4Config2SetDataFunc1AssertionGuid006 \
> + "Set Gateway succeeds(event is signaled correctly and data correct)."
> + Ip4Config2->UnregisterDataNotify
> "@R_Ip4Config2DataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP4CONFIG2_SETDATA_FUNC1_CASE2
> + EndLog
> + return
> +}
> +
> +Ip4Config2->UnregisterDataNotify
> "@R_Ip4Config2DataType,@R_DoneEvent,&@R_Status"
> +GetAck
> +RecordAssertion $assert $Ip4Config2SetDataFunc1AssertionGuid006 \
> + "Set Gateway succeeds(event is signaled correctly and data correct)."
> +
> +#
> +# Check Point : Set Dns Server
> +#
> +EFI_IPv4_ADDRESS R_Ip4Config2DnsServer
> +SetVar R_Ip4Config2DataType $IP4C2DT(DnsServer)
> +SetVar R_Ip4Config2DataSize [Sizeof EFI_IPv4_ADDRESS]
> +SetIpv4Address R_Ip4Config2DnsServer "10.248.2.5"
> +
> +SetVar R_Context 0
> +Ip4Config2->RegisterDataNotify
> "@R_Ip4Config2DataType,@R_DoneEvent,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip4Config2.RegisterDataNotify - Register notification event for
> configuration." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +Ip4Config2->SetData
> "@R_Ip4Config2DataType,@R_Ip4Config2DataSize,&@R_Ip4Config2DnsServer,
> &@R_Status"
> +GetAck
> +GetVar R_Status
> +
> +if { $R_Status == $EFI_SUCCESS } {
> + set assert pass
> + RecordAssertion $assert $Ip4Config2SetDataFunc1AssertionGuid007 \
> + "Ip4Config2.SetData - Call SetData to set Dns Address." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +} elseif { $R_Status == $EFI_NOT_READY } {
> + set i 0
> + set L_TimeOut 30
> + while { 1 > 0 } {
> + GetVar R_Context
> + if { $R_Context == 1 } {
> + break
> + } elseif { $i == $L_TimeOut } {
> + set assert fail
> + RecordAssertion $assert $Ip4Config2SetDataFunc1AssertionGuid007 \
> + "SetData failed.(event hasn't been signaled before TIMEOUT)." \
> + "TIMEOUT value is $L_TimeOut (sec), "
> + Ip4Config2->UnregisterDataNotify
> "@R_Ip4Config2DataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP4CONFIG2_SETDATA_FUNC1_CASE2
> + EndLog
> + return
> + }
> + incr i
> + Stall 1
> + }
> +} else {
> + set assert fail
> + RecordAssertion $assert $Ip4Config2SetDataFunc1AssertionGuid007 \
> + "Ip4Config2.SetData - Call SetData to set Dns Address." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> + Ip4Config2->UnregisterDataNotify
> "@R_Ip4Config2DataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP4CONFIG2_SETDATA_FUNC1_CASE2
> + EndLog
> + return
> +}
> +
> +
> +Ip4Config2->GetData
> "@R_Ip4Config2DataType,&@R_Ip4Config2DataSize,&@R_Ip4Config2DnsServe
> r,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip4Config2.GetData - Call GetData to get Dns Address." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +EFI_IPv4_ADDRESS R_Addr4
> +set R_Addr4 [GetIpv4Address R_Ip4Config2DnsServer]
> +puts "R_Addr4 - $R_Addr4"
> +
> +if {[string compare -nocase $R_Addr4 10.248.2.5] == 0} {
> + set assert pass
> +} else {
> + set assert fail
> +
> + RecordAssertion $assert $Ip4Config2SetDataFunc1AssertionGuid008 \
> + "Set Dns succeeds(event is signaled correctly and data correct)."
> + Ip4Config2->UnregisterDataNotify
> "@R_Ip4Config2DataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP4CONFIG2_SETDATA_FUNC1_CASE2
> + EndLog
> + return
> +}
> +
> +Ip4Config2->UnregisterDataNotify
> "@R_Ip4Config2DataType,@R_DoneEvent,&@R_Status"
> +GetAck
> +RecordAssertion $assert $Ip4Config2SetDataFunc1AssertionGuid008 \
> + "Set Dns succeeds(event is signaled correctly and data correct)."
> +
> +
> +
> +#
> +# Clean up - Call SetData when DataSize is 0 and Data is NULL
> +#
> +
> +
> +
> +#
> +# Set Manual Address
> +#
> +
> +SetVar R_Ip4Config2DataType $IP4C2DT(ManualAddress)
> +SetVar R_Ip4Config2DataSize 0
> +
> +
> +
> +SetVar R_Context 0
> +Ip4Config2->RegisterDataNotify
> "@R_Ip4Config2DataType,@R_DoneEvent,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip4Config2.RegisterDataNotify - Register notification event for
> configuration." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +
> +Ip4Config2->SetData
> "@R_Ip4Config2DataType,@R_Ip4Config2DataSize,NULL,&@R_Status"
> +GetAck
> +GetVar R_Status
> +
> +if { $R_Status == $EFI_SUCCESS } {
> + set assert pass
> + RecordAssertion $assert $Ip4Config2SetDataFunc1AssertionGuid012 \
> + "Ip4Config2.SetData - Call SetData to clear Manual Address." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +} elseif { $R_Status == $EFI_NOT_READY } {
> + set i 0
> + set L_TimeOut 30
> + while { 1 > 0 } {
> + GetVar R_Context
> + if { $R_Context == 1 } {
> + break
> + } elseif { $i == $L_TimeOut } {
> + set assert fail
> + RecordAssertion $assert $Ip4Config2SetDataFunc1AssertionGuid012 \
> + "SetData to clear Manual Address failed.(event hasn't been
> signaled before TIMEOUT)." \
> + "TIMEOUT value is $L_TimeOut (sec), "
> + SetVar R_Ip4Config2DataType $IP4C2DT(ManualAddress)
> + Ip4Config2->UnregisterDataNotify
> "@R_Ip4Config2DataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP4CONFIG2_SETDATA_FUNC1_CASE2
> + EndLog
> + return
> + }
> + incr i
> + Stall 1
> + }
> +} else {
> + set assert fail
> + RecordAssertion $assert $Ip4Config2SetDataFunc1AssertionGuid012 \
> + "IP4Config2.SetData - Call SetData to clear Manual Address." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> + SetVar R_Ip4Config2DataType $IP4C2DT(ManualAddress)
> + Ip4Config2->UnregisterDataNotify
> "@R_Ip4Config2DataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP4CONFIG2_SETDATA_FUNC1_CASE2
> + EndLog
> + return
> +}
> +
> +Ip4Config2->UnregisterDataNotify
> "@R_Ip4Config2DataType,@R_DoneEvent,&@R_Status"
> +GetAck
> +BS->CloseEvent {@R_DoneEvent,&@R_Status}
> +GetAck
> +
> +SetVar R_Ip4Config2DataSize [Sizeof EFI_IP4_CONFIG2_MANUAL_ADDRESS]
> +Ip4Config2->GetData
> "@R_Ip4Config2DataType,&@R_Ip4Config2DataSize,&@R_Ip4Config2ManualA
> ddress,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_NOT_FOUND]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip4Config2.GetData - Call GetData to get Manual Address." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_NOT_FOUND"
> +
> +#
> +# Set Gateway Address
> +#
> +
> +
> +SetVar R_Ip4Config2DataType $IP4C2DT(Gateway)
> +SetVar R_Ip4Config2DataSize 0
> +
> +SetVar R_Context 0
> +Ip4Config2->RegisterDataNotify
> "@R_Ip4Config2DataType,@R_DoneEvent,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip4Config2.RegisterDataNotify - Register notification event for
> configuration." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +Ip4Config2->SetData
> "@R_Ip4Config2DataType,@R_Ip4Config2DataSize,NULL,&@R_Status"
> +GetAck
> +GetVar R_Status
> +
> +if { $R_Status == $EFI_SUCCESS } {
> + set assert pass
> + RecordAssertion $assert $Ip4Config2SetDataFunc1AssertionGuid013 \
> + "Ip4Config2.SetData - Call SetData to clear Gateway Address." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +} elseif { $R_Status == $EFI_NOT_READY } {
> + set i 0
> + set L_TimeOut 30
> + while { 1 > 0 } {
> + GetVar R_Context
> + if { $R_Context == 1 } {
> + break
> + } elseif { $i == $L_TimeOut } {
> + set assert fail
> + RecordAssertion $assert $Ip4Config2SetDataFunc1AssertionGuid013 \
> + "SetData to clear Gateway Address failed.(event hasn't been
> signaled before TIMEOUT)." \
> + "TIMEOUT value is $L_TimeOut (sec), "
> + Ip4Config2->UnregisterDataNotify
> "@R_Ip4Config2DataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP4CONFIG2_SETDATA_FUNC1_CASE2
> + EndLog
> + return
> + }
> + incr i
> + Stall 1
> + }
> +} else {
> + set assert fail
> + RecordAssertion $assert $Ip4Config2SetDataFunc1AssertionGuid013 \
> + "Ip4Config2.SetData - Call SetData to clear Gateway Address." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> + Ip4Config2->UnregisterDataNotify
> "@R_Ip4Config2DataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP4CONFIG2_SETDATA_FUNC1_CASE2
> + EndLog
> + return
> +}
> +
> +Ip4Config2->UnregisterDataNotify
> "@R_Ip4Config2DataType,@R_DoneEvent,&@R_Status"
> +GetAck
> +BS->CloseEvent {@R_DoneEvent,&@R_Status}
> +GetAck
> +
> +SetVar R_Ip4Config2DataSize [Sizeof EFI_IPv4_ADDRESS]
> +Ip4Config2->GetData
> "@R_Ip4Config2DataType,&@R_Ip4Config2DataSize,&@R_Ip4Config2Gateway
> ,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_NOT_FOUND]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip4Config2.GetData - Call GetData to get Gateway Address."
> \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_NOT_FOUND"
> +
> +
> +#
> +# Check Point : Set Dns Server
> +#
> +
> +SetVar R_Ip4Config2DataType $IP4C2DT(DnsServer)
> +SetVar R_Ip4Config2DataSize 0
> +
> +SetVar R_Context 0
> +Ip4Config2->RegisterDataNotify
> "@R_Ip4Config2DataType,@R_DoneEvent,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip4Config2.RegisterDataNotify - Register notification event for
> configuration." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +Ip4Config2->SetData
> "@R_Ip4Config2DataType,@R_Ip4Config2DataSize,NULL,&@R_Status"
> +GetAck
> +GetVar R_Status
> +
> +if { $R_Status == $EFI_SUCCESS } {
> + set assert pass
> + RecordAssertion $assert $Ip4Config2SetDataFunc1AssertionGuid014 \
> + "Ip4Config2.SetData - Call SetData to clear Dns Address." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +} elseif { $R_Status == $EFI_NOT_READY } {
> + set i 0
> + set L_TimeOut 30
> + while { 1 > 0 } {
> + GetVar R_Context
> + if { $R_Context == 1 } {
> + break
> + } elseif { $i == $L_TimeOut } {
> + set assert fail
> + RecordAssertion $assert $Ip4Config2SetDataFunc1AssertionGuid014 \
> + "SetData to clear Dns Address failed.(event hasn't been signaled
> before TIMEOUT)." \
> + "TIMEOUT value is $L_TimeOut (sec), "
> + Ip4Config2->UnregisterDataNotify
> "@R_Ip4Config2DataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP4CONFIG2_SETDATA_FUNC1_CASE2
> + EndLog
> + return
> + }
> + incr i
> + Stall 1
> + }
> +} else {
> + set assert fail
> + RecordAssertion $assert $Ip4Config2SetDataFunc1AssertionGuid014 \
> + "Ip4Config2.SetData - Call SetData to clear Dns Address." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> + Ip4Config2->UnregisterDataNotify
> "@R_Ip4Config2DataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP4CONFIG2_SETDATA_FUNC1_CASE2
> + EndLog
> + return
> +}
> +
> +Ip4Config2->UnregisterDataNotify
> "@R_Ip4Config2DataType,@R_DoneEvent,&@R_Status"
> +GetAck
> +BS->CloseEvent {@R_DoneEvent,&@R_Status}
> +GetAck
> +
> +SetVar R_Ip4Config2DataSize [Sizeof EFI_IPv4_ADDRESS]
> +Ip4Config2->GetData
> "@R_Ip4Config2DataType,&@R_Ip4Config2DataSize,&@R_Ip4Config2DnsServe
> r,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_NOT_FOUND]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip4Config2.GetData - Call GetData to get Dns Address." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_NOT_FOUND"
> +
> +
> +
> +EndScope _IP4CONFIG2_SETDATA_FUNC1_CASE2
> +
> +EndLog
> \ No newline at end of file
> diff --git a/uefi-sct/EMS/Bin/TestCase/IP6Config/GetData.Conf1.Case1.tcl
> b/uefi-sct/EMS/Bin/TestCase/IP6Config/GetData.Conf1.Case1.tcl
> index a6b788d..beeb2fb 100644
> --- a/uefi-sct/EMS/Bin/TestCase/IP6Config/GetData.Conf1.Case1.tcl
> +++ b/uefi-sct/EMS/Bin/TestCase/IP6Config/GetData.Conf1.Case1.tcl
> @@ -1,72 +1,72 @@
> -#
> -# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
> -# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
> -#
> -# This program and the accompanying materials
> -# are licensed and made available under the terms and conditions of the BSD
> License
> -# which accompanies this distribution. The full text of the license may be
> found at
> -# http://opensource.org/licenses/bsd-license.php
> -#
> -# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS"
> BASIS,
> -# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER
> EXPRESS OR IMPLIED.
> -#
> -
> #################################################################
> ###############
> -CaseLevel CONFORMANCE
> -CaseAttribute AUTO
> -CaseVerboseLevel DEFAULT
> -set reportfile report.csv
> -
> -#
> -# test case Name, category, description, GUID...
> -#
> -CaseGuid 11FF93B5-8A85-4770-88C2-99E0AF9AE0AA
> -CaseName GetData.Conf1.Case1
> -CaseCategory IP6Config
> -CaseDescription {GetData must not succeed when data size is NULL.}
> -
> -
> #################################################################
> ###############
> -Include IP6Config/Include/Ip6Config.inc.tcl
> -
> -
> -#
> -# Begin log ...
> -#
> -BeginLog
> -
> -#
> -# BeginScope
> -#
> -BeginScope _IP6CONFIG_GETDATA_CONF1
> -
> -#
> -# Parameter Definition
> -# R_ represents "Remote EFI Side Parameter"
> -# L_ represents "Local ENTS Side Parameter"
> -#
> -UINTN R_Status
> -UINTN R_Context
> -UINTN R_DoneEvent
> -UINTN R_Ip6ConfigDataSize
> -EFI_IP6_CONFIG_INTERFACE_INFO R_Ip6ConfigInterfaceInfo
> -EFI_IP6_CONFIG_INTERFACE_ID R_Ip6ConfigInterfaceId
> -UINT32 R_Ip6ConfigPolicy
> -UINT32 R_Ip6ConfigDataType
> -EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS R_Ip6ConfigDadTransmits
> -EFI_IP6_CONFIG_MANUAL_ADDRESS R_Ip6ConfigManualAddress
> -
> -#
> -# Check Point: Call Ip6Config->GetData with datasize is NULL.
> -#
> -SetVar R_Ip6ConfigDataType $IP6CDT(InterfaceInfo)
> -SetVar R_Ip6ConfigDataSize [Sizeof EFI_IP6_CONFIG_INTERFACE_INFO]
> -
> -Ip6Config->GetData
> "@R_Ip6ConfigDataType,NULL,&@R_Ip6ConfigInterfaceInfo,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_INVALID_PARAMETER]
> -RecordAssertion $assert $Ip6ConfigGetDataConf1AssertionGuid001 \
> - "Ip6Config.GetData - Call GetData with DataSize NULL." \
> - "ReturnStatus - $R_Status, ExpectedStatus -
> $EFI_INVALID_PARAMETER"
> -
> -EndScope _IP6CONFIG_GETDATA_CONF1
> -
> +#
> +# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
> +# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
> +#
> +# This program and the accompanying materials
> +# are licensed and made available under the terms and conditions of the BSD
> License
> +# which accompanies this distribution. The full text of the license may be
> found at
> +# http://opensource.org/licenses/bsd-license.php
> +#
> +# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS"
> BASIS,
> +# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER
> EXPRESS OR IMPLIED.
> +#
> +################################################################
> ################
> +CaseLevel CONFORMANCE
> +CaseAttribute AUTO
> +CaseVerboseLevel DEFAULT
> +set reportfile report.csv
> +
> +#
> +# test case Name, category, description, GUID...
> +#
> +CaseGuid 11FF93B5-8A85-4770-88C2-99E0AF9AE0AA
> +CaseName GetData.Conf1.Case1
> +CaseCategory IP6Config
> +CaseDescription {GetData must not succeed when data size is NULL.}
> +
> +################################################################
> ################
> +Include IP6Config/Include/Ip6Config.inc.tcl
> +
> +
> +#
> +# Begin log ...
> +#
> +BeginLog
> +
> +#
> +# BeginScope
> +#
> +BeginScope _IP6CONFIG_GETDATA_CONF1
> +
> +#
> +# Parameter Definition
> +# R_ represents "Remote EFI Side Parameter"
> +# L_ represents "Local ENTS Side Parameter"
> +#
> +UINTN R_Status
> +UINTN R_Context
> +UINTN R_DoneEvent
> +UINTN R_Ip6ConfigDataSize
> +EFI_IP6_CONFIG_INTERFACE_INFO R_Ip6ConfigInterfaceInfo
> +EFI_IP6_CONFIG_INTERFACE_ID R_Ip6ConfigInterfaceId
> +UINT32 R_Ip6ConfigPolicy
> +UINT32 R_Ip6ConfigDataType
> +EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS
> R_Ip6ConfigDadTransmits
> +EFI_IP6_CONFIG_MANUAL_ADDRESS R_Ip6ConfigManualAddress
> +
> +#
> +# Check Point: Call Ip6Config->GetData with datasize is NULL.
> +#
> +SetVar R_Ip6ConfigDataType $IP6CDT(InterfaceInfo)
> +SetVar R_Ip6ConfigDataSize [Sizeof EFI_IP6_CONFIG_INTERFACE_INFO]
> +
> +Ip6Config->GetData
> "@R_Ip6ConfigDataType,NULL,&@R_Ip6ConfigInterfaceInfo,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_INVALID_PARAMETER]
> +RecordAssertion $assert $Ip6ConfigGetDataConf1AssertionGuid001 \
> + "Ip6Config.GetData - Call GetData with DataSize NULL." \
> + "ReturnStatus - $R_Status, ExpectedStatus -
> $EFI_INVALID_PARAMETER"
> +
> +EndScope _IP6CONFIG_GETDATA_CONF1
> +
> EndLog
> \ No newline at end of file
> diff --git a/uefi-sct/EMS/Bin/TestCase/IP6Config/GetData.Conf2.Case1.tcl
> b/uefi-sct/EMS/Bin/TestCase/IP6Config/GetData.Conf2.Case1.tcl
> index c095756..6f90a9c 100644
> --- a/uefi-sct/EMS/Bin/TestCase/IP6Config/GetData.Conf2.Case1.tcl
> +++ b/uefi-sct/EMS/Bin/TestCase/IP6Config/GetData.Conf2.Case1.tcl
> @@ -1,71 +1,71 @@
> -#
> -# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
> -# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
> -#
> -# This program and the accompanying materials
> -# are licensed and made available under the terms and conditions of the BSD
> License
> -# which accompanies this distribution. The full text of the license may be
> found at
> -# http://opensource.org/licenses/bsd-license.php
> -#
> -# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS"
> BASIS,
> -# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER
> EXPRESS OR IMPLIED.
> -#
> -
> #################################################################
> ###############
> -CaseLevel CONFORMANCE
> -CaseAttribute AUTO
> -CaseVerboseLevel DEFAULT
> -set reportfile report.csv
> -
> -#
> -# test case Name, category, description, GUID...
> -#
> -CaseGuid B4C48D71-EF72-42e0-BD57-4825F7EB7B9F
> -CaseName GetData.Conf2.Case1
> -CaseCategory IP6Config
> -CaseDescription {GetData must not succeed when data is NULL if data size is
> not zero.}
> -
> -
> #################################################################
> ###############
> -Include IP6Config/Include/Ip6Config.inc.tcl
> -
> -
> -#
> -# Begin log ...
> -#
> -BeginLog
> -
> -#
> -# BeginScope
> -#
> -BeginScope _IP6CONFIG_GETDATA_CONF2
> -
> -#
> -# Parameter Definition
> -# R_ represents "Remote EFI Side Parameter"
> -# L_ represents "Local ENTS Side Parameter"
> -#
> -UINTN R_Status
> -UINTN R_Context
> -UINTN R_DoneEvent
> -UINTN R_Ip6ConfigDataSize
> -UINT32 R_Ip6ConfigDataType
> -EFI_IP6_CONFIG_INTERFACE_INFO R_Ip6ConfigInterfaceInfo
> -EFI_IP6_CONFIG_INTERFACE_ID R_Ip6ConfigInterfaceId
> -EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS R_Ip6ConfigDadTransmits
> -EFI_IP6_CONFIG_MANUAL_ADDRESS R_Ip6ConfigManualAddress
> -
> -#
> -# Check Point: Call Ip6Config->GetData with data is NULL.
> -#
> -SetVar R_Ip6ConfigDataType $IP6CDT(InterfaceInfo)
> -SetVar R_Ip6ConfigDataSize [Sizeof EFI_IP6_CONFIG_INTERFACE_INFO]
> -
> -Ip6Config->GetData
> "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,NULL,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_INVALID_PARAMETER]
> -RecordAssertion $assert $Ip6ConfigGetDataConf2AssertionGuid001 \
> - "Ip6Config.GetData - Call GetData with Data NULL." \
> - "ReturnStatus - $R_Status, ExpectedStatus -
> $EFI_INVALID_PARAMETER"
> -
> -EndScope _IP6CONFIG_GETDATA_CONF2
> -
> +#
> +# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
> +# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
> +#
> +# This program and the accompanying materials
> +# are licensed and made available under the terms and conditions of the BSD
> License
> +# which accompanies this distribution. The full text of the license may be
> found at
> +# http://opensource.org/licenses/bsd-license.php
> +#
> +# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS"
> BASIS,
> +# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER
> EXPRESS OR IMPLIED.
> +#
> +################################################################
> ################
> +CaseLevel CONFORMANCE
> +CaseAttribute AUTO
> +CaseVerboseLevel DEFAULT
> +set reportfile report.csv
> +
> +#
> +# test case Name, category, description, GUID...
> +#
> +CaseGuid B4C48D71-EF72-42e0-BD57-4825F7EB7B9F
> +CaseName GetData.Conf2.Case1
> +CaseCategory IP6Config
> +CaseDescription {GetData must not succeed when data is NULL if data size is
> not zero.}
> +
> +################################################################
> ################
> +Include IP6Config/Include/Ip6Config.inc.tcl
> +
> +
> +#
> +# Begin log ...
> +#
> +BeginLog
> +
> +#
> +# BeginScope
> +#
> +BeginScope _IP6CONFIG_GETDATA_CONF2
> +
> +#
> +# Parameter Definition
> +# R_ represents "Remote EFI Side Parameter"
> +# L_ represents "Local ENTS Side Parameter"
> +#
> +UINTN R_Status
> +UINTN R_Context
> +UINTN R_DoneEvent
> +UINTN R_Ip6ConfigDataSize
> +UINT32 R_Ip6ConfigDataType
> +EFI_IP6_CONFIG_INTERFACE_INFO R_Ip6ConfigInterfaceInfo
> +EFI_IP6_CONFIG_INTERFACE_ID R_Ip6ConfigInterfaceId
> +EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS
> R_Ip6ConfigDadTransmits
> +EFI_IP6_CONFIG_MANUAL_ADDRESS R_Ip6ConfigManualAddress
> +
> +#
> +# Check Point: Call Ip6Config->GetData with data is NULL.
> +#
> +SetVar R_Ip6ConfigDataType $IP6CDT(InterfaceInfo)
> +SetVar R_Ip6ConfigDataSize [Sizeof EFI_IP6_CONFIG_INTERFACE_INFO]
> +
> +Ip6Config->GetData
> "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,NULL,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_INVALID_PARAMETER]
> +RecordAssertion $assert $Ip6ConfigGetDataConf2AssertionGuid001 \
> + "Ip6Config.GetData - Call GetData with Data NULL." \
> + "ReturnStatus - $R_Status, ExpectedStatus -
> $EFI_INVALID_PARAMETER"
> +
> +EndScope _IP6CONFIG_GETDATA_CONF2
> +
> EndLog
> \ No newline at end of file
> diff --git a/uefi-sct/EMS/Bin/TestCase/IP6Config/GetData.Conf3.Case1.tcl
> b/uefi-sct/EMS/Bin/TestCase/IP6Config/GetData.Conf3.Case1.tcl
> index c90d442..5688648 100644
> --- a/uefi-sct/EMS/Bin/TestCase/IP6Config/GetData.Conf3.Case1.tcl
> +++ b/uefi-sct/EMS/Bin/TestCase/IP6Config/GetData.Conf3.Case1.tcl
> @@ -1,395 +1,395 @@
> -#
> -# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
> -# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
> -#
> -# This program and the accompanying materials
> -# are licensed and made available under the terms and conditions of the BSD
> License
> -# which accompanies this distribution. The full text of the license may be
> found at
> -# http://opensource.org/licenses/bsd-license.php
> -#
> -# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS"
> BASIS,
> -# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER
> EXPRESS OR IMPLIED.
> -#
> -
> #################################################################
> ###############
> -CaseLevel CONFORMANCE
> -CaseAttribute AUTO
> -CaseVerboseLevel DEFAULT
> -set reportfile report.csv
> -
> -#
> -# test case Name, category, description, GUID...
> -#
> -CaseGuid 7B341FC4-1F10-4851-83AD-103A56B0EC35
> -CaseName GetData.Conf3.Case1
> -CaseCategory IP6Config
> -CaseDescription {GetData must not succeed when DataSize is too small for the
> data type.}
> -
> -
> #################################################################
> ###############
> -Include IP6Config/Include/Ip6Config.inc.tcl
> -
> -
> -#
> -# Begin log ...
> -#
> -BeginLog
> -
> -#
> -# BeginScope
> -#
> -BeginScope _IP6CONFIG_GETDATA_CONF3
> -
> -#
> -# Parameter Definition
> -# R_ represents "Remote EFI Side Parameter"
> -# L_ represents "Local ENTS Side Parameter"
> -#
> -UINTN R_Status
> -UINTN R_Context
> -UINTN R_Context1
> -UINTN R_DoneEvent
> -UINTN R_DoneEvent1
> -UINTN R_Ip6ConfigDataSize
> -UINT32 R_Ip6ConfigDataType
> -EFI_IP6_CONFIG_INTERFACE_INFO R_Ip6ConfigInterfaceInfo
> -EFI_IP6_CONFIG_INTERFACE_ID R_Ip6ConfigInterfaceId
> -UINT32 R_Ip6ConfigPolicy
> -EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS R_Ip6ConfigDadTransmits
> -
> -#
> -# Check Point: Call Ip6Config->SetData to set manual policy
> -#
> -SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> -SetVar R_Ip6ConfigDataSize [Sizeof UINT32]
> -SetVar R_Ip6ConfigPolicy $IP6CP(Manual)
> -
> -SetVar R_Context 0
> -BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context,\
> - &@R_DoneEvent, &@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "BS.CreateEvent." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -Ip6Config->RegisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.RegisterDataNotify - Register notification event for
> configuration." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -Ip6Config->SetData
> "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_S
> tatus"
> -GetAck
> -GetVar R_Status
> -if { $R_Status == $EFI_SUCCESS } {
> - set assert pass
> - RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.SetData - Call SetData to set manual policy." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -} elseif { $R_Status == $EFI_NOT_READY } {
> - set i 0
> - set L_TimeOut 30
> - while { 1 > 0 } {
> - GetVar R_Context
> - if { $R_Context == 1 } {
> - break
> - } elseif { $i == $L_TimeOut } {
> - set assert fail
> -
> - RecordAssertion $assert $GenericAssertionGuid \
> - "SetData failed.(event hasn't been signaled before TIMEOUT)." \
> - "TIMEOUT value is $L_TimeOut (sec), "
> - SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> - Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - EndScope _IP6CONFIG_GETDATA_CONF3
> - EndLog
> - return
> - }
> - incr i
> - Stall 1
> - }
> -} else {
> - set assert fail
> - RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.SetData - Call SetData to set manual policy." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> - SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> - Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - EndScope _IP6CONFIG_GETDATA_CONF3
> - EndLog
> - return
> -}
> -
> -Ip6Config->GetData
> "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_
> Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.GetData - Call GetData to get policy value." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -GetVar R_Ip6ConfigPolicy
> -if { $R_Ip6ConfigPolicy == $IP6CP(Manual) } {
> - set assert pass
> -} else {
> - set assert fail
> -
> - RecordAssertion $assert $GenericAssertionGuid \
> - "Set manual policy failure (event is signaled correctly and data
> correct)."
> - SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> - Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - EndScope _IP6CONFIG_GETDATA_CONF3
> - EndLog
> - return
> -}
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Set manual policy succeeds(event is signaled correctly and data
> correct)."
> -
> -#
> -# Check Point : Set Manual Address with valid value
> -#
> -EFI_IP6_CONFIG_MANUAL_ADDRESS R_Temp_Ip6ConfigManualAddress
> -
> -set L_ManualListLen 1
> -EFI_IP6_CONFIG_MANUAL_ADDRESS R_Ip6ConfigManualAddress
> -set L_UnitLen [Sizeof EFI_IP6_CONFIG_MANUAL_ADDRESS]
> -set L_ListLen [expr {$L_UnitLen * $L_ManualListLen}]
> -SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
> -SetVar R_Ip6ConfigDataSize $L_ListLen
> -SetVar R_Temp_Ip6ConfigManualAddress.IsAnycast FALSE
> -SetVar R_Temp_Ip6ConfigManualAddress.PrefixLength 64
> -SetIpv6Address R_Temp_Ip6ConfigManualAddress.Address "2002::5001"
> -SetVar R_Ip6ConfigManualAddress @R_Temp_Ip6ConfigManualAddress
> -
> -SetVar R_Context1 0
> -BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1,
> &@R_Context1,\
> - &@R_DoneEvent1, &@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "BS.CreateEvent." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -Ip6Config->RegisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.RegisterDataNotify - Register notification event for
> configuration." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -Ip6Config->SetData
> "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigManualAddres
> s,&@R_Status"
> -GetAck
> -GetVar R_Status
> -if { $R_Status == $EFI_SUCCESS } {
> - set assert pass
> - RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.SetData - Call SetData with valid value." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -} elseif { $R_Status == $EFI_NOT_READY } {
> - set i 0
> - set L_TimeOut 30
> - while { 1 > 0 } {
> - GetVar R_Context1
> - if { $R_Context1 == 1 } {
> - break
> - } elseif { $i == $L_TimeOut } {
> - set assert fail
> -
> - RecordAssertion $assert $GenericAssertionGuid \
> - "SetData failed.(event hasn't been signaled before TIMEOUT)." \
> - "TIMEOUT value is $L_TimeOut (sec), "
> - SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
> - Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> - GetAck
> - SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> - Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - EndScope _IP6CONFIG_GETDATA_CONF3
> - EndLog
> - return
> - }
> - incr i
> - Stall 1
> - }
> -} else {
> - set assert fail
> - RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.SetData - Call SetData to set manual address." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> - SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
> - Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> - GetAck
> - SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> - Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - EndScope _IP6CONFIG_GETDATA_CONF3
> - EndLog
> - return
> -}
> -
> -#
> -# Check Point : Get Manual Address with datasize too small
> -#
> -SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
> -SetVar R_Ip6ConfigDataSize 16
> -
> -Ip6Config->GetData
> "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigManualAddr
> ess,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_BUFFER_TOO_SMALL]
> -RecordAssertion $assert $Ip6ConfigGetDataConf3AssertionGuid001 \
> - "Ip6Config.GetData - Call GetData with the datasize too small." \
> - "ReturnStatus - $R_Status, ExpectedStatus -
> $EFI_BUFFER_TOO_SMALL"
> -
> -GetVar R_Ip6ConfigDataSize
> -set L_ObtainedSize [ expr { $R_Ip6ConfigDataSize } ]
> -set L_DesiredSize [ Sizeof EFI_IP6_CONFIG_MANUAL_ADDRESS ]
> -if { [ expr { $L_ObtainedSize % $L_DesiredSize } ] == 0 } {
> - set assert pass
> -} else {
> - set assert fail
> -}
> -RecordAssertion $assert $Ip6ConfigGetDataConf3AssertionGuid002 \
> - "Ip6Config.GetData - Correctly Modify the DataSize." \
> - "ReturnSize - $L_ObtainedSize, ExpectedSize - $L_DesiredSize"
> -
> -#
> -# Clean up
> -#
> -
> -#
> -# Set automatic policy (this will clean up all address information configured)
> -#
> -SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> -SetVar R_Ip6ConfigDataSize [Sizeof UINT32]
> -SetVar R_Ip6ConfigPolicy $IP6CP(Automatic)
> -
> -SetVar R_Context 0
> -
> -Ip6Config->SetData
> "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_S
> tatus"
> -GetAck
> -GetVar R_Status
> -if { $R_Status == $EFI_SUCCESS } {
> - set assert pass
> -} elseif { $R_Status == $EFI_NOT_READY } {
> - set i 0
> - set L_TimeOut 30
> - set assert pass
> - while { 1 > 0 } {
> - GetVar R_Context
> - if { $R_Context == 1 } {
> - break
> - } elseif { $i == $L_TimeOut } {
> - set assert fail
> -
> - SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> - Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
> - Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> - GetAck
> -
> - EndScope _IP6CONFIG_GETDATA_CONF3
> - EndLog
> - return
> - }
> - incr i
> - Stall 1
> - }
> -} else {
> - set assert fail
> -
> - SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> - Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
> - Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> - GetAck
> -
> - EndScope _IP6CONFIG_GETDATA_CONF3
> - EndLog
> - return
> -}
> -
> -Ip6Config->GetData
> "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_
> Status"
> -GetAck
> -GetVar R_Ip6ConfigPolicy
> -if { $R_Ip6ConfigPolicy == $IP6CP(Automatic) } {
> - set assert pass
> -} else {
> - set assert fail
> -
> - RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.SetData - Set automatic policy to clean up the former
> configuration." \
> - "TimeUsed - $i, TimeOut Value- $L_TimeOut"
> - SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> - Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
> - Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> - GetAck
> -
> - EndScope _IP6CONFIG_GETDATA_CONF3
> - EndLog
> - return
> -}
> -
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.SetData - Set automatic policy to clean up the former
> configuration." \
> - "TimeUsed - $i, TimeOut Value- $L_TimeOut"
> -
> -#
> -# Unregister Event for Manual Address and close event
> -#
> -SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
> -Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.UnregisterDataNotify - Unregister notification event for
> configuration." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> -GetAck
> -SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> -Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.UnregisterDataNotify - Unregister notification event for
> configuration." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -BS->CloseEvent {@R_DoneEvent,&@R_Status}
> -GetAck
> -
> -EndScope _IP6CONFIG_GETDATA_CONF3
> -
> +#
> +# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
> +# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
> +#
> +# This program and the accompanying materials
> +# are licensed and made available under the terms and conditions of the BSD
> License
> +# which accompanies this distribution. The full text of the license may be
> found at
> +# http://opensource.org/licenses/bsd-license.php
> +#
> +# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS"
> BASIS,
> +# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER
> EXPRESS OR IMPLIED.
> +#
> +################################################################
> ################
> +CaseLevel CONFORMANCE
> +CaseAttribute AUTO
> +CaseVerboseLevel DEFAULT
> +set reportfile report.csv
> +
> +#
> +# test case Name, category, description, GUID...
> +#
> +CaseGuid 7B341FC4-1F10-4851-83AD-103A56B0EC35
> +CaseName GetData.Conf3.Case1
> +CaseCategory IP6Config
> +CaseDescription {GetData must not succeed when DataSize is too small for the
> data type.}
> +
> +################################################################
> ################
> +Include IP6Config/Include/Ip6Config.inc.tcl
> +
> +
> +#
> +# Begin log ...
> +#
> +BeginLog
> +
> +#
> +# BeginScope
> +#
> +BeginScope _IP6CONFIG_GETDATA_CONF3
> +
> +#
> +# Parameter Definition
> +# R_ represents "Remote EFI Side Parameter"
> +# L_ represents "Local ENTS Side Parameter"
> +#
> +UINTN R_Status
> +UINTN R_Context
> +UINTN R_Context1
> +UINTN R_DoneEvent
> +UINTN R_DoneEvent1
> +UINTN R_Ip6ConfigDataSize
> +UINT32 R_Ip6ConfigDataType
> +EFI_IP6_CONFIG_INTERFACE_INFO R_Ip6ConfigInterfaceInfo
> +EFI_IP6_CONFIG_INTERFACE_ID R_Ip6ConfigInterfaceId
> +UINT32 R_Ip6ConfigPolicy
> +EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS
> R_Ip6ConfigDadTransmits
> +
> +#
> +# Check Point: Call Ip6Config->SetData to set manual policy
> +#
> +SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> +SetVar R_Ip6ConfigDataSize [Sizeof UINT32]
> +SetVar R_Ip6ConfigPolicy $IP6CP(Manual)
> +
> +SetVar R_Context 0
> +BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1,
> &@R_Context,\
> + &@R_DoneEvent, &@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "BS.CreateEvent." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +Ip6Config->RegisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.RegisterDataNotify - Register notification event for
> configuration." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +Ip6Config->SetData
> "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_S
> tatus"
> +GetAck
> +GetVar R_Status
> +if { $R_Status == $EFI_SUCCESS } {
> + set assert pass
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.SetData - Call SetData to set manual policy." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +} elseif { $R_Status == $EFI_NOT_READY } {
> + set i 0
> + set L_TimeOut 30
> + while { 1 > 0 } {
> + GetVar R_Context
> + if { $R_Context == 1 } {
> + break
> + } elseif { $i == $L_TimeOut } {
> + set assert fail
> +
> + RecordAssertion $assert $GenericAssertionGuid \
> + "SetData failed.(event hasn't been signaled before TIMEOUT)." \
> + "TIMEOUT value is $L_TimeOut (sec), "
> + SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> + Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_GETDATA_CONF3
> + EndLog
> + return
> + }
> + incr i
> + Stall 1
> + }
> +} else {
> + set assert fail
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.SetData - Call SetData to set manual policy." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> + SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> + Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_GETDATA_CONF3
> + EndLog
> + return
> +}
> +
> +Ip6Config->GetData
> "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_
> Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.GetData - Call GetData to get policy value." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +GetVar R_Ip6ConfigPolicy
> +if { $R_Ip6ConfigPolicy == $IP6CP(Manual) } {
> + set assert pass
> +} else {
> + set assert fail
> +
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Set manual policy failure (event is signaled correctly and data
> correct)."
> + SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> + Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_GETDATA_CONF3
> + EndLog
> + return
> +}
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Set manual policy succeeds(event is signaled correctly and data
> correct)."
> +
> +#
> +# Check Point : Set Manual Address with valid value
> +#
> +EFI_IP6_CONFIG_MANUAL_ADDRESS R_Temp_Ip6ConfigManualAddress
> +
> +set L_ManualListLen 1
> +EFI_IP6_CONFIG_MANUAL_ADDRESS R_Ip6ConfigManualAddress
> +set L_UnitLen [Sizeof EFI_IP6_CONFIG_MANUAL_ADDRESS]
> +set L_ListLen [expr {$L_UnitLen * $L_ManualListLen}]
> +SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
> +SetVar R_Ip6ConfigDataSize $L_ListLen
> +SetVar R_Temp_Ip6ConfigManualAddress.IsAnycast FALSE
> +SetVar R_Temp_Ip6ConfigManualAddress.PrefixLength 64
> +SetIpv6Address R_Temp_Ip6ConfigManualAddress.Address "2002::5001"
> +SetVar R_Ip6ConfigManualAddress @R_Temp_Ip6ConfigManualAddress
> +
> +SetVar R_Context1 0
> +BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1,
> &@R_Context1,\
> + &@R_DoneEvent1, &@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "BS.CreateEvent." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +Ip6Config->RegisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.RegisterDataNotify - Register notification event for
> configuration." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +Ip6Config->SetData
> "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigManualAddres
> s,&@R_Status"
> +GetAck
> +GetVar R_Status
> +if { $R_Status == $EFI_SUCCESS } {
> + set assert pass
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.SetData - Call SetData with valid value." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +} elseif { $R_Status == $EFI_NOT_READY } {
> + set i 0
> + set L_TimeOut 30
> + while { 1 > 0 } {
> + GetVar R_Context1
> + if { $R_Context1 == 1 } {
> + break
> + } elseif { $i == $L_TimeOut } {
> + set assert fail
> +
> + RecordAssertion $assert $GenericAssertionGuid \
> + "SetData failed.(event hasn't been signaled before TIMEOUT)." \
> + "TIMEOUT value is $L_TimeOut (sec), "
> + SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
> + Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> + GetAck
> + SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> + Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_GETDATA_CONF3
> + EndLog
> + return
> + }
> + incr i
> + Stall 1
> + }
> +} else {
> + set assert fail
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.SetData - Call SetData to set manual address." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> + SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
> + Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> + GetAck
> + SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> + Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_GETDATA_CONF3
> + EndLog
> + return
> +}
> +
> +#
> +# Check Point : Get Manual Address with datasize too small
> +#
> +SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
> +SetVar R_Ip6ConfigDataSize 16
> +
> +Ip6Config->GetData
> "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigManualAddr
> ess,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_BUFFER_TOO_SMALL]
> +RecordAssertion $assert $Ip6ConfigGetDataConf3AssertionGuid001 \
> + "Ip6Config.GetData - Call GetData with the datasize too small."
> \
> + "ReturnStatus - $R_Status, ExpectedStatus -
> $EFI_BUFFER_TOO_SMALL"
> +
> +GetVar R_Ip6ConfigDataSize
> +set L_ObtainedSize [ expr { $R_Ip6ConfigDataSize } ]
> +set L_DesiredSize [ Sizeof EFI_IP6_CONFIG_MANUAL_ADDRESS ]
> +if { [ expr { $L_ObtainedSize % $L_DesiredSize } ] == 0 } {
> + set assert pass
> +} else {
> + set assert fail
> +}
> +RecordAssertion $assert $Ip6ConfigGetDataConf3AssertionGuid002 \
> + "Ip6Config.GetData - Correctly Modify the DataSize." \
> + "ReturnSize - $L_ObtainedSize, ExpectedSize - $L_DesiredSize"
> +
> +#
> +# Clean up
> +#
> +
> +#
> +# Set automatic policy (this will clean up all address information configured)
> +#
> +SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> +SetVar R_Ip6ConfigDataSize [Sizeof UINT32]
> +SetVar R_Ip6ConfigPolicy $IP6CP(Automatic)
> +
> +SetVar R_Context 0
> +
> +Ip6Config->SetData
> "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_S
> tatus"
> +GetAck
> +GetVar R_Status
> +if { $R_Status == $EFI_SUCCESS } {
> + set assert pass
> +} elseif { $R_Status == $EFI_NOT_READY } {
> + set i 0
> + set L_TimeOut 30
> + set assert pass
> + while { 1 > 0 } {
> + GetVar R_Context
> + if { $R_Context == 1 } {
> + break
> + } elseif { $i == $L_TimeOut } {
> + set assert fail
> +
> + SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> + Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
> + Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> + GetAck
> +
> + EndScope _IP6CONFIG_GETDATA_CONF3
> + EndLog
> + return
> + }
> + incr i
> + Stall 1
> + }
> +} else {
> + set assert fail
> +
> + SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> + Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
> + Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> + GetAck
> +
> + EndScope _IP6CONFIG_GETDATA_CONF3
> + EndLog
> + return
> +}
> +
> +Ip6Config->GetData
> "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_
> Status"
> +GetAck
> +GetVar R_Ip6ConfigPolicy
> +if { $R_Ip6ConfigPolicy == $IP6CP(Automatic) } {
> + set assert pass
> +} else {
> + set assert fail
> +
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.SetData - Set automatic policy to clean up the former
> configuration." \
> + "TimeUsed - $i, TimeOut Value- $L_TimeOut"
> + SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> + Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
> + Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> + GetAck
> +
> + EndScope _IP6CONFIG_GETDATA_CONF3
> + EndLog
> + return
> +}
> +
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.SetData - Set automatic policy to clean up the former
> configuration." \
> + "TimeUsed - $i, TimeOut Value- $L_TimeOut"
> +
> +#
> +# Unregister Event for Manual Address and close event
> +#
> +SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
> +Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.UnregisterDataNotify - Unregister notification event for
> configuration." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> +GetAck
> +SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> +Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.UnregisterDataNotify - Unregister notification event for
> configuration." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +BS->CloseEvent {@R_DoneEvent,&@R_Status}
> +GetAck
> +
> +EndScope _IP6CONFIG_GETDATA_CONF3
> +
> EndLog
> \ No newline at end of file
> diff --git a/uefi-sct/EMS/Bin/TestCase/IP6Config/GetData.Conf4.Case1.tcl
> b/uefi-sct/EMS/Bin/TestCase/IP6Config/GetData.Conf4.Case1.tcl
> index e36cdfc..bd38be0 100644
> --- a/uefi-sct/EMS/Bin/TestCase/IP6Config/GetData.Conf4.Case1.tcl
> +++ b/uefi-sct/EMS/Bin/TestCase/IP6Config/GetData.Conf4.Case1.tcl
> @@ -1,73 +1,73 @@
> -#
> -# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
> -# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
> -#
> -# This program and the accompanying materials
> -# are licensed and made available under the terms and conditions of the BSD
> License
> -# which accompanies this distribution. The full text of the license may be
> found at
> -# http://opensource.org/licenses/bsd-license.php
> -#
> -# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS"
> BASIS,
> -# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER
> EXPRESS OR IMPLIED.
> -#
> -
> #################################################################
> ###############
> -CaseLevel CONFORMANCE
> -CaseAttribute AUTO
> -CaseVerboseLevel DEFAULT
> -set reportfile report.csv
> -
> -#
> -# test case Name, category, description, GUID...
> -#
> -CaseGuid F340A957-9345-478d-BE53-5F7C561C1866
> -CaseName GetData.Conf4.Case1
> -CaseCategory IP6Config
> -CaseDescription {GetData must not succeed when data type is not found.}
> -
> -
> #################################################################
> ###############
> -Include IP6Config/Include/Ip6Config.inc.tcl
> -
> -
> -#
> -# Begin log ...
> -#
> -BeginLog
> -
> -#
> -# BeginScope
> -#
> -BeginScope _IP6CONFIG_GETDATA_CONF4
> -
> -#
> -# Parameter Definition
> -# R_ represents "Remote EFI Side Parameter"
> -# L_ represents "Local ENTS Side Parameter"
> -#
> -UINTN R_Status
> -UINTN R_Context
> -UINTN R_DoneEvent
> -UINTN R_Ip6ConfigDataSize
> -UINT32 R_Ip6ConfigDataType
> -UINTN R_Ip6ConfigMaximumType
> -EFI_IP6_CONFIG_INTERFACE_INFO R_Ip6ConfigInterfaceInfo
> -EFI_IP6_CONFIG_INTERFACE_ID R_Ip6ConfigInterfaceId
> -UINT32 R_Ip6ConfigPolicy
> -EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS R_Ip6ConfigDadTransmits
> -EFI_IP6_CONFIG_MANUAL_ADDRESS R_Ip6ConfigManualAddress
> -
> -#
> -# Check Point: Call Ip6Config->GetData with the date type not existing.
> -#
> -SetVar R_Ip6ConfigDataType $IP6CDT(Maximum)
> -SetVar R_Ip6ConfigDataSize [Sizeof UINT32]
> -
> -Ip6Config->GetData
> "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigMaximumTy
> pe,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_NOT_FOUND]
> -RecordAssertion $assert $Ip6ConfigGetDataConf4AssertionGuid001 \
> - "Ip6Config.GetData - Call GetData with Datatype not existing." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_NOT_FOUND"
> -
> -EndScope _IP6CONFIG_GETDATA_CONF4
> -
> +#
> +# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
> +# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
> +#
> +# This program and the accompanying materials
> +# are licensed and made available under the terms and conditions of the BSD
> License
> +# which accompanies this distribution. The full text of the license may be
> found at
> +# http://opensource.org/licenses/bsd-license.php
> +#
> +# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS"
> BASIS,
> +# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER
> EXPRESS OR IMPLIED.
> +#
> +################################################################
> ################
> +CaseLevel CONFORMANCE
> +CaseAttribute AUTO
> +CaseVerboseLevel DEFAULT
> +set reportfile report.csv
> +
> +#
> +# test case Name, category, description, GUID...
> +#
> +CaseGuid F340A957-9345-478d-BE53-5F7C561C1866
> +CaseName GetData.Conf4.Case1
> +CaseCategory IP6Config
> +CaseDescription {GetData must not succeed when data type is not found.}
> +
> +################################################################
> ################
> +Include IP6Config/Include/Ip6Config.inc.tcl
> +
> +
> +#
> +# Begin log ...
> +#
> +BeginLog
> +
> +#
> +# BeginScope
> +#
> +BeginScope _IP6CONFIG_GETDATA_CONF4
> +
> +#
> +# Parameter Definition
> +# R_ represents "Remote EFI Side Parameter"
> +# L_ represents "Local ENTS Side Parameter"
> +#
> +UINTN R_Status
> +UINTN R_Context
> +UINTN R_DoneEvent
> +UINTN R_Ip6ConfigDataSize
> +UINT32 R_Ip6ConfigDataType
> +UINTN R_Ip6ConfigMaximumType
> +EFI_IP6_CONFIG_INTERFACE_INFO R_Ip6ConfigInterfaceInfo
> +EFI_IP6_CONFIG_INTERFACE_ID R_Ip6ConfigInterfaceId
> +UINT32 R_Ip6ConfigPolicy
> +EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS
> R_Ip6ConfigDadTransmits
> +EFI_IP6_CONFIG_MANUAL_ADDRESS R_Ip6ConfigManualAddress
> +
> +#
> +# Check Point: Call Ip6Config->GetData with the date type not existing.
> +#
> +SetVar R_Ip6ConfigDataType $IP6CDT(Maximum)
> +SetVar R_Ip6ConfigDataSize [Sizeof UINT32]
> +
> +Ip6Config->GetData
> "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigMaximumTy
> pe,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_NOT_FOUND]
> +RecordAssertion $assert $Ip6ConfigGetDataConf4AssertionGuid001 \
> + "Ip6Config.GetData - Call GetData with Datatype not existing." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_NOT_FOUND"
> +
> +EndScope _IP6CONFIG_GETDATA_CONF4
> +
> EndLog
> \ No newline at end of file
> diff --git a/uefi-sct/EMS/Bin/TestCase/IP6Config/GetData.Conf5.Case1.tcl
> b/uefi-sct/EMS/Bin/TestCase/IP6Config/GetData.Conf5.Case1.tcl
> index c39323f..c186520 100644
> --- a/uefi-sct/EMS/Bin/TestCase/IP6Config/GetData.Conf5.Case1.tcl
> +++ b/uefi-sct/EMS/Bin/TestCase/IP6Config/GetData.Conf5.Case1.tcl
> @@ -1,492 +1,492 @@
> -#
> -# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
> -# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
> -#
> -# This program and the accompanying materials
> -# are licensed and made available under the terms and conditions of the BSD
> License
> -# which accompanies this distribution. The full text of the license may be
> found at
> -# http://opensource.org/licenses/bsd-license.php
> -#
> -# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS"
> BASIS,
> -# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER
> EXPRESS OR IMPLIED.
> -#
> -
> #################################################################
> ###############
> -CaseLevel CONFORMANCE
> -CaseAttribute AUTO
> -CaseVerboseLevel DEFAULT
> -set reportfile report.csv
> -
> -#
> -# test case Name, category, description, GUID...
> -#
> -CaseGuid 6638523D-470B-4c50-AE75-DE0CE6854DE8
> -CaseName GetData.Conf5.Case1
> -CaseCategory IP6Config
> -CaseDescription {GetData must not succeed when the last asynchronous
> process for the data type has not been finished yet.}
> -
> -
> #################################################################
> ###############
> -Include IP6Config/Include/Ip6Config.inc.tcl
> -
> -
> -#
> -# Begin log ...
> -#
> -BeginLog
> -
> -#
> -# BeginScope
> -#
> -BeginScope _IP6CONFIG_GETDATA_CONF5
> -
> -#
> -# Parameter Definition
> -# R_ represents "Remote EFI Side Parameter"
> -# L_ represents "Local ENTS Side Parameter"
> -#
> -UINTN R_Status
> -UINTN R_Context
> -UINTN R_DoneEvent
> -UINTN R_Context1
> -UINTN R_DoneEvent1
> -UINTN R_Ip6ConfigDataSize
> -UINT32 R_Ip6ConfigDataType
> -EFI_IP6_CONFIG_INTERFACE_INFO R_Ip6ConfigInterfaceInfo
> -EFI_IP6_CONFIG_INTERFACE_ID R_Ip6ConfigInterfaceId
> -UINT32 R_Ip6ConfigPolicy
> -EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS R_Ip6ConfigDadTransmits
> -
> -#
> -# Check Point: Call Ip6Config->SetData to set manual policy
> -#
> -SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> -SetVar R_Ip6ConfigDataSize [Sizeof UINT32]
> -SetVar R_Ip6ConfigPolicy $IP6CP(Manual)
> -
> -SetVar R_Context 0
> -BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context,\
> - &@R_DoneEvent, &@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "BS.CreateEvent." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -Ip6Config->RegisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.RegisterDataNotify - Register notification event for
> configuration." \
> - "ReturnStatus - $R_Status, ExpectedStatus -
> $EFI_SUCCESS"
> -
> -Ip6Config->SetData
> "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_S
> tatus"
> -GetAck
> -GetVar R_Status
> -if { $R_Status == $EFI_SUCCESS } {
> - set assert pass
> - RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.SetData - Call SetData to set manual policy." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -} elseif { $R_Status == $EFI_NOT_READY } {
> - set i 0
> - set L_TimeOut 30
> - while { 1 > 0 } {
> - GetVar R_Context
> - if { $R_Context == 1 } {
> - break
> - } elseif { $i == $L_TimeOut } {
> - set assert fail
> - RecordAssertion $assert $GenericAssertionGuid \
> - "SetData failed.(event hasn't been signaled before TIMEOUT)." \
> - "TIMEOUT value is $L_TimeOut (sec), "
> - SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> - Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - EndScope _IP6CONFIG_GETDATA_CONF5
> - EndLog
> - return
> - }
> - incr i
> - Stall 1
> - }
> -} else {
> - set assert fail
> - RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.SetData - Call SetData to set manual policy." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> - SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> - Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - EndScope _IP6CONFIG_GETDATA_CONF5
> - EndLog
> - return
> -}
> -
> -Ip6Config->GetData
> "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_
> Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.GetData - Call GetData to get policy value." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -GetVar R_Ip6ConfigPolicy
> -if { $R_Ip6ConfigPolicy == $IP6CP(Manual) } {
> - set assert pass
> -} else {
> - set assert fail
> -
> - RecordAssertion $assert $GenericAssertionGuid \
> - "Set manual policy succeeds(event is signaled correctly and data
> correct)."
> - SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> - Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - EndScope _IP6CONFIG_GETDATA_CONF5
> - EndLog
> - return
> -}
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Set manual policy succeeds(event is signaled correctly and data
> correct)."
> -#
> -# Check Point: Call Ip6Config->SetData to set DadXmits 20
> -#
> -SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> -SetVar R_Ip6ConfigDataSize [Sizeof
> EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS]
> -SetVar R_Ip6ConfigDadTransmits.DupAddrDetectTransmits 20
> -
> -SetVar R_Context1 0
> -BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1,
> &@R_Context1,\
> - &@R_DoneEvent1, &@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "BS.CreateEvent." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -Ip6Config->RegisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.RegisterDataNotify - Register notification event for
> configuration." \
> - "ReturnStatus - $R_Status, ExpectedStatus -
> $EFI_SUCCESS"
> -
> -Ip6Config->SetData
> "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigDadTransmits,
> &@R_Status"
> -GetAck
> -GetVar R_Status
> -if { $R_Status == $EFI_SUCCESS } {
> - set assert pass
> - RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.SetData - Call SetData to set DadXmits 10." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -} elseif { $R_Status == $EFI_NOT_READY } {
> - set i 0
> - set L_TimeOut 30
> - while { 1 > 0 } {
> - GetVar R_Context1
> - if { $R_Context1 == 1 } {
> - break
> - } elseif { $i == $L_TimeOut } {
> - set assert fail
> - RecordAssertion $assert $GenericAssertionGuid \
> - "SetData failed.(event hasn't been signaled before TIMEOUT)." \
> - "TIMEOUT value is $L_TimeOut (sec), "
> -
> - SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> - Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - SetVar R_Ip6ConfigDataType
> $IP6CDT(DupAddrDetectTransmits)
> - Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> - GetAck
> - EndScope _IP6CONFIG_GETDATA_CONF5
> - EndLog
> - return
> - }
> - incr i
> - Stall 1
> - }
> -} else {
> - set assert fail
> - RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.SetData - Call SetData to set DadXmits 10." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> - SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> - Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> - Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> - GetAck
> - EndScope _IP6CONFIG_GETDATA_CONF5
> - EndLog
> - return
> -}
> -
> -Ip6Config->GetData
> "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigDadTransmit
> s,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.GetData - Call GetData to get DadXmits value." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -GetVar R_Ip6ConfigDadTransmits.DupAddrDetectTransmits
> -if { ${R_Ip6ConfigDadTransmits.DupAddrDetectTransmits} == 20 } {
> - set assert pass
> -} else {
> - set assert fail
> -
> - RecordAssertion $assert $GenericAssertionGuid \
> - "Set DadXmits succeeds(event is signaled correctly and data
> correct)."
> - SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> - Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> - Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> - GetAck
> - EndScope _IP6CONFIG_GETDATA_CONF5
> - EndLog
> - return
> -}
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Set DadXmits succeeds(event is signaled correctly and data
> correct)."
> -
> -#
> -# Check Point : Set Manual Address with valid parameter
> -#
> -EFI_IP6_CONFIG_MANUAL_ADDRESS R_Temp_Ip6ConfigManualAddress
> -
> -set L_ManualListLen 1
> -EFI_IP6_CONFIG_MANUAL_ADDRESS R_Ip6ConfigManualAddress
> -set L_UnitLen [Sizeof EFI_IP6_CONFIG_MANUAL_ADDRESS]
> -set L_ListLen [expr {$L_UnitLen * $L_ManualListLen}]
> -SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
> -SetVar R_Ip6ConfigDataSize $L_ListLen
> -SetVar R_Temp_Ip6ConfigManualAddress.IsAnycast FALSE
> -SetVar R_Temp_Ip6ConfigManualAddress.PrefixLength 64
> -SetIpv6Address R_Temp_Ip6ConfigManualAddress.Address "2002::5000"
> -SetVar R_Ip6ConfigManualAddress @R_Temp_Ip6ConfigManualAddress
> -
> -Ip6Config->SetData
> "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigManualAddres
> s,&@R_Status"
> -GetAck
> -GetVar R_Status
> -if { $R_Status == $EFI_NOT_READY } {
> - set assert pass
> -} else {
> - set assert fail
> -
> - RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.SetData - Call SetData to set manual address with valid
> parameter." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_NOT_READY"
> - SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> - Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> - Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> - GetAck
> - EndScope _IP6CONFIG_GETDATA_CONF5
> - EndLog
> - return
> -}
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.SetData - Call SetData to set manual address with valid
> parameter." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_NOT_READY"
> -
> -#
> -# Check Point : Get Manual Address with valid parameter before the former
> setting finishes
> -#
> -set L_ManualListLen 1
> -set L_UnitLen [Sizeof EFI_IP6_CONFIG_MANUAL_ADDRESS]
> -set L_ListLen [expr {$L_UnitLen * $L_ManualListLen}]
> -SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
> -SetVar R_Ip6ConfigDataSize $L_ListLen
> -
> -Ip6Config->GetData
> "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigManualAddr
> ess,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_NOT_READY]
> -RecordAssertion $assert $Ip6ConfigGetDataConf5AssertionGuid001 \
> - "Ip6Config.SetData - Call GetData to get manual address before the
> former setting finishes." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_NOT_READY"
> -
> -#
> -# Make sure the former configurations succeeds
> -# (Eliminate the side-effect to other cases)
> -#
> -set i 0
> -set L_TimeOut 30
> -Ip6Config->GetData
> "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigManualAddr
> ess,&@R_Status"
> -GetAck
> -GetVar R_Status
> -set assert pass
> -while { $R_Status == $EFI_NOT_READY } {
> - Ip6Config->GetData
> "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigManualAddr
> ess,&@R_Status"
> - GetAck
> - GetVar R_Status
> - if { $R_Status == $EFI_SUCCESS } {
> - break
> - } elseif { $i == $L_TimeOut } {
> - set assert fail
> -
> - RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.SetData - former SetData finishes." \
> - "TimeUsed - $i, TimeOut Value- $L_TimeOut"
> - SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> - Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> - Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> - GetAck
> - EndScope _IP6CONFIG_GETDATA_CONF5
> - EndLog
> - return
> - }
> - incr i
> - Stall 1
> -}
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.SetData - former SetData finishes." \
> - "TimeUsed - $i, TimeOut Value- $L_TimeOut"
> -
> -
> -#
> -# Set automatic policy (this will clean up all address information configured)
> -#
> -SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> -SetVar R_Ip6ConfigDataSize [Sizeof UINT32]
> -SetVar R_Ip6ConfigPolicy $IP6CP(Automatic)
> -
> -SetVar R_Context 0
> -
> -Ip6Config->SetData
> "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_S
> tatus"
> -GetAck
> -GetVar R_Status
> -if { $R_Status == $EFI_SUCCESS } {
> - set assert pass
> -} elseif { $R_Status == $EFI_NOT_READY } {
> - set i 0
> - set L_TimeOut 30
> - set assert pass
> - while { 1 > 0 } {
> - GetVar R_Context
> - if { $R_Context == 1 } {
> - break
> - } elseif { $i == $L_TimeOut } {
> - set assert fail
> -
> - SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> - Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> - Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> - GetAck
> -
> - EndScope _IP6CONFIG_GETDATA_CONF5
> - EndLog
> - return
> - }
> - incr i
> - Stall 1
> - }
> -} else {
> - set assert fail
> -
> - SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> - Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> - Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> - GetAck
> -
> - EndScope _IP6CONFIG_GETDATA_CONF5
> - EndLog
> - return
> -}
> -
> -Ip6Config->GetData
> "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_
> Status"
> -GetAck
> -GetVar R_Ip6ConfigPolicy
> -if { $R_Ip6ConfigPolicy == $IP6CP(Automatic) } {
> - set assert pass
> -} else {
> - set assert fail
> -
> - RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.SetData - Set automatic policy to clean up the former
> configuration." \
> - "TimeUsed - $i, TimeOut Value- $L_TimeOut"
> -
> - SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> - Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> - Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> - GetAck
> -
> - EndScope _IP6CONFIG_GETDATA_CONF5
> - EndLog
> - return
> -}
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.SetData - Set automatic policy to clean up the former
> configuration." \
> - "TimeUsed - $i, TimeOut Value- $L_TimeOut"
> -
> -#
> -# Clean up
> -#
> -SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> -Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.UnregisterDataNotify - Unregister notification event for
> configuration." \
> - "ReturnStatus - $R_Status, ExpectedStatus -
> $EFI_SUCCESS"
> -
> -BS->CloseEvent {@R_DoneEvent,&@R_Status}
> -GetAck
> -
> -SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> -Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.UnregisterDataNotify - Unregister notification event for
> configuration." \
> - "ReturnStatus - $R_Status, ExpectedStatus -
> $EFI_SUCCESS"
> -
> -BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> -GetAck
> -
> -EndScope _IP6CONFIG_GETDATA_CONF5
> -
> +#
> +# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
> +# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
> +#
> +# This program and the accompanying materials
> +# are licensed and made available under the terms and conditions of the BSD
> License
> +# which accompanies this distribution. The full text of the license may be
> found at
> +# http://opensource.org/licenses/bsd-license.php
> +#
> +# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS"
> BASIS,
> +# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER
> EXPRESS OR IMPLIED.
> +#
> +################################################################
> ################
> +CaseLevel CONFORMANCE
> +CaseAttribute AUTO
> +CaseVerboseLevel DEFAULT
> +set reportfile report.csv
> +
> +#
> +# test case Name, category, description, GUID...
> +#
> +CaseGuid 6638523D-470B-4c50-AE75-DE0CE6854DE8
> +CaseName GetData.Conf5.Case1
> +CaseCategory IP6Config
> +CaseDescription {GetData must not succeed when the last asynchronous
> process for the data type has not been finished yet.}
> +
> +################################################################
> ################
> +Include IP6Config/Include/Ip6Config.inc.tcl
> +
> +
> +#
> +# Begin log ...
> +#
> +BeginLog
> +
> +#
> +# BeginScope
> +#
> +BeginScope _IP6CONFIG_GETDATA_CONF5
> +
> +#
> +# Parameter Definition
> +# R_ represents "Remote EFI Side Parameter"
> +# L_ represents "Local ENTS Side Parameter"
> +#
> +UINTN R_Status
> +UINTN R_Context
> +UINTN R_DoneEvent
> +UINTN R_Context1
> +UINTN R_DoneEvent1
> +UINTN R_Ip6ConfigDataSize
> +UINT32 R_Ip6ConfigDataType
> +EFI_IP6_CONFIG_INTERFACE_INFO R_Ip6ConfigInterfaceInfo
> +EFI_IP6_CONFIG_INTERFACE_ID R_Ip6ConfigInterfaceId
> +UINT32 R_Ip6ConfigPolicy
> +EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS
> R_Ip6ConfigDadTransmits
> +
> +#
> +# Check Point: Call Ip6Config->SetData to set manual policy
> +#
> +SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> +SetVar R_Ip6ConfigDataSize [Sizeof UINT32]
> +SetVar R_Ip6ConfigPolicy $IP6CP(Manual)
> +
> +SetVar R_Context 0
> +BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1,
> &@R_Context,\
> + &@R_DoneEvent, &@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "BS.CreateEvent." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +Ip6Config->RegisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.RegisterDataNotify - Register notification event for
> configuration." \
> + "ReturnStatus - $R_Status, ExpectedStatus -
> $EFI_SUCCESS"
> +
> +Ip6Config->SetData
> "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_S
> tatus"
> +GetAck
> +GetVar R_Status
> +if { $R_Status == $EFI_SUCCESS } {
> + set assert pass
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.SetData - Call SetData to set manual policy." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +} elseif { $R_Status == $EFI_NOT_READY } {
> + set i 0
> + set L_TimeOut 30
> + while { 1 > 0 } {
> + GetVar R_Context
> + if { $R_Context == 1 } {
> + break
> + } elseif { $i == $L_TimeOut } {
> + set assert fail
> + RecordAssertion $assert $GenericAssertionGuid \
> + "SetData failed.(event hasn't been signaled before TIMEOUT)." \
> + "TIMEOUT value is $L_TimeOut (sec), "
> + SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> + Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_GETDATA_CONF5
> + EndLog
> + return
> + }
> + incr i
> + Stall 1
> + }
> +} else {
> + set assert fail
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.SetData - Call SetData to set manual policy." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> + SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> + Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_GETDATA_CONF5
> + EndLog
> + return
> +}
> +
> +Ip6Config->GetData
> "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_
> Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.GetData - Call GetData to get policy value." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +GetVar R_Ip6ConfigPolicy
> +if { $R_Ip6ConfigPolicy == $IP6CP(Manual) } {
> + set assert pass
> +} else {
> + set assert fail
> +
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Set manual policy succeeds(event is signaled correctly and data
> correct)."
> + SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> + Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_GETDATA_CONF5
> + EndLog
> + return
> +}
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Set manual policy succeeds(event is signaled correctly and data
> correct)."
> +#
> +# Check Point: Call Ip6Config->SetData to set DadXmits 20
> +#
> +SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> +SetVar R_Ip6ConfigDataSize [Sizeof
> EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS]
> +SetVar R_Ip6ConfigDadTransmits.DupAddrDetectTransmits 20
> +
> +SetVar R_Context1 0
> +BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1,
> &@R_Context1,\
> + &@R_DoneEvent1, &@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "BS.CreateEvent." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +Ip6Config->RegisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.RegisterDataNotify - Register notification event for
> configuration." \
> + "ReturnStatus - $R_Status, ExpectedStatus -
> $EFI_SUCCESS"
> +
> +Ip6Config->SetData
> "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigDadTransmits,
> &@R_Status"
> +GetAck
> +GetVar R_Status
> +if { $R_Status == $EFI_SUCCESS } {
> + set assert pass
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.SetData - Call SetData to set DadXmits 10." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +} elseif { $R_Status == $EFI_NOT_READY } {
> + set i 0
> + set L_TimeOut 30
> + while { 1 > 0 } {
> + GetVar R_Context1
> + if { $R_Context1 == 1 } {
> + break
> + } elseif { $i == $L_TimeOut } {
> + set assert fail
> + RecordAssertion $assert $GenericAssertionGuid \
> + "SetData failed.(event hasn't been signaled before TIMEOUT)." \
> + "TIMEOUT value is $L_TimeOut (sec), "
> +
> + SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> + Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + SetVar R_Ip6ConfigDataType
> $IP6CDT(DupAddrDetectTransmits)
> + Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_GETDATA_CONF5
> + EndLog
> + return
> + }
> + incr i
> + Stall 1
> + }
> +} else {
> + set assert fail
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.SetData - Call SetData to set DadXmits 10." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> + SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> + Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> + Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_GETDATA_CONF5
> + EndLog
> + return
> +}
> +
> +Ip6Config->GetData
> "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigDadTransmit
> s,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.GetData - Call GetData to get DadXmits value." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +GetVar R_Ip6ConfigDadTransmits.DupAddrDetectTransmits
> +if { ${R_Ip6ConfigDadTransmits.DupAddrDetectTransmits} == 20 } {
> + set assert pass
> +} else {
> + set assert fail
> +
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Set DadXmits succeeds(event is signaled correctly and data
> correct)."
> + SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> + Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> + Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_GETDATA_CONF5
> + EndLog
> + return
> +}
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Set DadXmits succeeds(event is signaled correctly and data
> correct)."
> +
> +#
> +# Check Point : Set Manual Address with valid parameter
> +#
> +EFI_IP6_CONFIG_MANUAL_ADDRESS R_Temp_Ip6ConfigManualAddress
> +
> +set L_ManualListLen 1
> +EFI_IP6_CONFIG_MANUAL_ADDRESS R_Ip6ConfigManualAddress
> +set L_UnitLen [Sizeof EFI_IP6_CONFIG_MANUAL_ADDRESS]
> +set L_ListLen [expr {$L_UnitLen * $L_ManualListLen}]
> +SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
> +SetVar R_Ip6ConfigDataSize $L_ListLen
> +SetVar R_Temp_Ip6ConfigManualAddress.IsAnycast FALSE
> +SetVar R_Temp_Ip6ConfigManualAddress.PrefixLength 64
> +SetIpv6Address R_Temp_Ip6ConfigManualAddress.Address "2002::5000"
> +SetVar R_Ip6ConfigManualAddress @R_Temp_Ip6ConfigManualAddress
> +
> +Ip6Config->SetData
> "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigManualAddres
> s,&@R_Status"
> +GetAck
> +GetVar R_Status
> +if { $R_Status == $EFI_NOT_READY } {
> + set assert pass
> +} else {
> + set assert fail
> +
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.SetData - Call SetData to set manual address with valid
> parameter." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_NOT_READY"
> + SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> + Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> + Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_GETDATA_CONF5
> + EndLog
> + return
> +}
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.SetData - Call SetData to set manual address with valid
> parameter." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_NOT_READY"
> +
> +#
> +# Check Point : Get Manual Address with valid parameter before the former
> setting finishes
> +#
> +set L_ManualListLen 1
> +set L_UnitLen [Sizeof EFI_IP6_CONFIG_MANUAL_ADDRESS]
> +set L_ListLen [expr {$L_UnitLen * $L_ManualListLen}]
> +SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
> +SetVar R_Ip6ConfigDataSize $L_ListLen
> +
> +Ip6Config->GetData
> "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigManualAddr
> ess,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_NOT_READY]
> +RecordAssertion $assert $Ip6ConfigGetDataConf5AssertionGuid001 \
> + "Ip6Config.SetData - Call GetData to get manual address before the
> former setting finishes." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_NOT_READY"
> +
> +#
> +# Make sure the former configurations succeeds
> +# (Eliminate the side-effect to other cases)
> +#
> +set i 0
> +set L_TimeOut 30
> +Ip6Config->GetData
> "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigManualAddr
> ess,&@R_Status"
> +GetAck
> +GetVar R_Status
> +set assert pass
> +while { $R_Status == $EFI_NOT_READY } {
> + Ip6Config->GetData
> "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigManualAddr
> ess,&@R_Status"
> + GetAck
> + GetVar R_Status
> + if { $R_Status == $EFI_SUCCESS } {
> + break
> + } elseif { $i == $L_TimeOut } {
> + set assert fail
> +
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.SetData - former SetData finishes." \
> + "TimeUsed - $i, TimeOut Value- $L_TimeOut"
> + SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> + Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> + Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_GETDATA_CONF5
> + EndLog
> + return
> + }
> + incr i
> + Stall 1
> +}
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.SetData - former SetData finishes." \
> + "TimeUsed - $i, TimeOut Value- $L_TimeOut"
> +
> +
> +#
> +# Set automatic policy (this will clean up all address information configured)
> +#
> +SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> +SetVar R_Ip6ConfigDataSize [Sizeof UINT32]
> +SetVar R_Ip6ConfigPolicy $IP6CP(Automatic)
> +
> +SetVar R_Context 0
> +
> +Ip6Config->SetData
> "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_S
> tatus"
> +GetAck
> +GetVar R_Status
> +if { $R_Status == $EFI_SUCCESS } {
> + set assert pass
> +} elseif { $R_Status == $EFI_NOT_READY } {
> + set i 0
> + set L_TimeOut 30
> + set assert pass
> + while { 1 > 0 } {
> + GetVar R_Context
> + if { $R_Context == 1 } {
> + break
> + } elseif { $i == $L_TimeOut } {
> + set assert fail
> +
> + SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> + Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> + Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> + GetAck
> +
> + EndScope _IP6CONFIG_GETDATA_CONF5
> + EndLog
> + return
> + }
> + incr i
> + Stall 1
> + }
> +} else {
> + set assert fail
> +
> + SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> + Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> + Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> + GetAck
> +
> + EndScope _IP6CONFIG_GETDATA_CONF5
> + EndLog
> + return
> +}
> +
> +Ip6Config->GetData
> "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_
> Status"
> +GetAck
> +GetVar R_Ip6ConfigPolicy
> +if { $R_Ip6ConfigPolicy == $IP6CP(Automatic) } {
> + set assert pass
> +} else {
> + set assert fail
> +
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.SetData - Set automatic policy to clean up the former
> configuration." \
> + "TimeUsed - $i, TimeOut Value- $L_TimeOut"
> +
> + SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> + Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> + Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> + GetAck
> +
> + EndScope _IP6CONFIG_GETDATA_CONF5
> + EndLog
> + return
> +}
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.SetData - Set automatic policy to clean up the former
> configuration." \
> + "TimeUsed - $i, TimeOut Value- $L_TimeOut"
> +
> +#
> +# Clean up
> +#
> +SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> +Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.UnregisterDataNotify - Unregister notification event for
> configuration." \
> + "ReturnStatus - $R_Status, ExpectedStatus -
> $EFI_SUCCESS"
> +
> +BS->CloseEvent {@R_DoneEvent,&@R_Status}
> +GetAck
> +
> +SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> +Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.UnregisterDataNotify - Unregister notification event for
> configuration." \
> + "ReturnStatus - $R_Status, ExpectedStatus -
> $EFI_SUCCESS"
> +
> +BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> +GetAck
> +
> +EndScope _IP6CONFIG_GETDATA_CONF5
> +
> EndLog
> \ No newline at end of file
> diff --git a/uefi-sct/EMS/Bin/TestCase/IP6Config/GetData.Func1.Case1.tcl
> b/uefi-sct/EMS/Bin/TestCase/IP6Config/GetData.Func1.Case1.tcl
> index 6c4a72b..a0acc20 100644
> --- a/uefi-sct/EMS/Bin/TestCase/IP6Config/GetData.Func1.Case1.tcl
> +++ b/uefi-sct/EMS/Bin/TestCase/IP6Config/GetData.Func1.Case1.tcl
> @@ -1,272 +1,272 @@
> -#
> -# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
> -# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
> -#
> -# This program and the accompanying materials
> -# are licensed and made available under the terms and conditions of the BSD
> License
> -# which accompanies this distribution. The full text of the license may be
> found at
> -# http://opensource.org/licenses/bsd-license.php
> -#
> -# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS"
> BASIS,
> -# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER
> EXPRESS OR IMPLIED.
> -#
> -
> #################################################################
> ###############
> -CaseLevel FUNCTION
> -CaseAttribute AUTO
> -CaseVerboseLevel DEFAULT
> -set reportfile report.csv
> -
> -#
> -# test case Name, category, description, GUID...
> -#
> -CaseGuid E4CD5B45-9CF5-4938-A243-7764F1E8CDE9
> -CaseName GetData.Func1.Case1
> -CaseCategory IP6Config
> -CaseDescription {GetData must succeed with valid parameters.}
> -
> -
> #################################################################
> ###############
> -Include IP6Config/Include/Ip6Config.inc.tcl
> -
> -
> -#
> -# Begin log ...
> -#
> -BeginLog
> -
> -#
> -# BeginScope
> -#
> -BeginScope _IP6CONFIG_GETDATA_FUNC1
> -
> -#
> -# Parameter Definition
> -# R_ represents "Remote EFI Side Parameter"
> -# L_ represents "Local ENTS Side Parameter"
> -#
> -UINTN R_Status
> -UINTN R_Context
> -UINTN R_Context1
> -UINTN R_DoneEvent
> -UINTN R_DoneEvent1
> -UINTN R_Ip6ConfigDataSize
> -UINT32 R_Ip6ConfigDataType
> -EFI_IP6_CONFIG_INTERFACE_INFO R_Ip6ConfigInterfaceInfo
> -EFI_IP6_CONFIG_INTERFACE_ID R_Ip6ConfigInterfaceId
> -UINT32 R_Ip6ConfigPolicy
> -EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS R_Ip6ConfigDadTransmits
> -
> -#
> -# Check Point: Call Ip6Config->GetData to set AltInterfaceId
> -#
> -SetVar R_Ip6ConfigDataType $IP6CDT(AltInterfaceId)
> -SetVar R_Ip6ConfigDataSize [Sizeof EFI_IP6_CONFIG_INTERFACE_ID]
> -SetVar R_Ip6ConfigInterfaceId.Id(0) 0
> -SetVar R_Ip6ConfigInterfaceId.Id(1) 1
> -SetVar R_Ip6ConfigInterfaceId.Id(2) 2
> -SetVar R_Ip6ConfigInterfaceId.Id(3) 3
> -SetVar R_Ip6ConfigInterfaceId.Id(4) 4
> -SetVar R_Ip6ConfigInterfaceId.Id(5) 5
> -SetVar R_Ip6ConfigInterfaceId.Id(6) 6
> -SetVar R_Ip6ConfigInterfaceId.Id(7) 7
> -
> -SetVar R_Context 0
> -BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context,\
> - &@R_DoneEvent, &@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "BS.CreateEvent." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -Ip6Config->RegisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.RegisterDataNotify - Register notification event for
> configuration." \
> - "ReturnStatus - $R_Status, ExpectedStatus -
> $EFI_SUCCESS"
> -
> -Ip6Config->SetData
> "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigInterfaceId,&
> @R_Status"
> -GetAck
> -GetVar R_Status
> -if { $R_Status == $EFI_SUCCESS } {
> - set assert pass
> - RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.GetData - Call GetData to set AltInterfaceId." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -} elseif { $R_Status == $EFI_NOT_READY } {
> - set i 0
> - set L_TimeOut 30
> - while { 1 > 0 } {
> - GetVar R_Context
> - if { $R_Context == 1 } {
> - break
> - } elseif { $i == $L_TimeOut } {
> - set assert fail
> - RecordAssertion $assert $GenericAssertionGuid \
> - "GetData failed.(event hasn't been signaled before TIMEOUT)." \
> - "TIMEOUT value is $L_TimeOut (sec), "
> - SetVar R_Ip6ConfigDataType $IP6CDT(AltInterfaceId)
> - Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - EndScope _IP6CONFIG_GETDATA_FUNC1
> - EndLog
> - return
> - }
> - incr i
> - Stall 1
> - }
> -} else {
> - set assert fail
> - RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.GetData - Call GetData to set AltInterfaceId." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> - SetVar R_Ip6ConfigDataType $IP6CDT(AltInterfaceId)
> - Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - EndScope _IP6CONFIG_GETDATA_FUNC1
> - EndLog
> - return
> -}
> -
> -Ip6Config->GetData
> "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigInterfaceId,
> &@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $Ip6ConfigGetDataFunc1AssertionGuid001 \
> - "Ip6Config.GetData - Call GetData to get AltInterfaceId value."
> \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -GetVar R_Ip6ConfigInterfaceId
> -if { ${R_Ip6ConfigInterfaceId.Id(0)} == 0 && ${R_Ip6ConfigInterfaceId.Id(1)} ==
> 1 && ${R_Ip6ConfigInterfaceId.Id(2)} == 2 && ${R_Ip6ConfigInterfaceId.Id(3)}
> == 3 && ${R_Ip6ConfigInterfaceId.Id(4)} == 4 && ${R_Ip6ConfigInterfaceId.Id(5)}
> == 5 && ${R_Ip6ConfigInterfaceId.Id(6)} == 6 && ${R_Ip6ConfigInterfaceId.Id(7)}
> == 7} {
> - set assert pass
> -} else {
> - set assert fail
> -}
> -RecordAssertion $assert $Ip6ConfigGetDataFunc1AssertionGuid002 \
> - "Set AltInterfaceId succeeds(event is signaled correctly and data
> correct)."
> -
> -#
> -# Check Point: Call Ip6Config->SetData to set DadXmits
> -#
> -SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> -SetVar R_Ip6ConfigDataSize [Sizeof
> EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS]
> -SetVar R_Ip6ConfigDadTransmits.DupAddrDetectTransmits 3
> -
> -SetVar R_Context1 0
> -BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1,
> &@R_Context1,\
> - &@R_DoneEvent1, &@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "BS.CreateEvent." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -Ip6Config->RegisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.RegisterDataNotify - Register notification event for
> configuration." \
> - "ReturnStatus - $R_Status, ExpectedStatus -
> $EFI_SUCCESS"
> -
> -Ip6Config->SetData
> "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigDadTransmits,
> &@R_Status"
> -GetAck
> -GetVar R_Status
> -if { $R_Status == $EFI_SUCCESS } {
> - set assert pass
> - RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.GetData - Call GetData to set DadXmits." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -} elseif { $R_Status == $EFI_NOT_READY } {
> - set i 0
> - set L_TimeOut 30
> - while { 1 > 0 } {
> - GetVar R_Context1
> - if { $R_Context1 == 1 } {
> - break
> - } elseif { $i == $L_TimeOut } {
> - set assert fail
> - RecordAssertion $assert $GenericAssertionGuid \
> - "GetData failed.(event hasn't been signaled before TIMEOUT)." \
> - "TIMEOUT value is $L_TimeOut (sec), "
> - SetVar R_Ip6ConfigDataType $IP6CDT(AltInterfaceId)
> - Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - SetVar R_Ip6ConfigDataType
> $IP6CDT(DupAddrDetectTransmits)
> - Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> - GetAck
> - EndScope _IP6CONFIG_GETDATA_FUNC1
> - EndLog
> - return
> - }
> - incr i
> - Stall 1
> - }
> -} else {
> - set assert fail
> - RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.GetData - Call GetData to set manual DadXmits." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> - SetVar R_Ip6ConfigDataType $IP6CDT(AltInterfaceId)
> - Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> - Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> - GetAck
> - EndScope _IP6CONFIG_GETDATA_FUNC1
> - EndLog
> - return
> -}
> -
> -Ip6Config->GetData
> "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigDadTransmit
> s,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $Ip6ConfigGetDataFunc1AssertionGuid003 \
> - "Ip6Config.GetData - Call GetData to get DadXmits value." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -GetVar R_Ip6ConfigDadTransmits
> -if { ${R_Ip6ConfigDadTransmits.DupAddrDetectTransmits} == 3 } {
> - set assert pass
> -} else {
> - set assert fail
> -}
> -RecordAssertion $assert $Ip6ConfigGetDataFunc1AssertionGuid004 \
> - "Set DadXmits succeeds(event is signaled correctly and data
> correct)."
> -
> -#
> -# Clean up
> -#
> -SetVar R_Ip6ConfigDataType $IP6CDT(AltInterfaceId)
> -Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.UnregisterDataNotify - Unregister notification event for
> configuration." \
> - "ReturnStatus - $R_Status, ExpectedStatus -
> $EFI_SUCCESS"
> -BS->CloseEvent {@R_DoneEvent,&@R_Status}
> -GetAck
> -
> -SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> -Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.UnregisterDataNotify - Unregister notification event for
> configuration." \
> - "ReturnStatus - $R_Status, ExpectedStatus -
> $EFI_SUCCESS"
> -BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> -GetAck
> -
> -EndScope _IP6CONFIG_GETDATA_FUNC1
> -
> +#
> +# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
> +# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
> +#
> +# This program and the accompanying materials
> +# are licensed and made available under the terms and conditions of the BSD
> License
> +# which accompanies this distribution. The full text of the license may be
> found at
> +# http://opensource.org/licenses/bsd-license.php
> +#
> +# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS"
> BASIS,
> +# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER
> EXPRESS OR IMPLIED.
> +#
> +################################################################
> ################
> +CaseLevel FUNCTION
> +CaseAttribute AUTO
> +CaseVerboseLevel DEFAULT
> +set reportfile report.csv
> +
> +#
> +# test case Name, category, description, GUID...
> +#
> +CaseGuid E4CD5B45-9CF5-4938-A243-7764F1E8CDE9
> +CaseName GetData.Func1.Case1
> +CaseCategory IP6Config
> +CaseDescription {GetData must succeed with valid parameters.}
> +
> +################################################################
> ################
> +Include IP6Config/Include/Ip6Config.inc.tcl
> +
> +
> +#
> +# Begin log ...
> +#
> +BeginLog
> +
> +#
> +# BeginScope
> +#
> +BeginScope _IP6CONFIG_GETDATA_FUNC1
> +
> +#
> +# Parameter Definition
> +# R_ represents "Remote EFI Side Parameter"
> +# L_ represents "Local ENTS Side Parameter"
> +#
> +UINTN R_Status
> +UINTN R_Context
> +UINTN R_Context1
> +UINTN R_DoneEvent
> +UINTN R_DoneEvent1
> +UINTN R_Ip6ConfigDataSize
> +UINT32 R_Ip6ConfigDataType
> +EFI_IP6_CONFIG_INTERFACE_INFO R_Ip6ConfigInterfaceInfo
> +EFI_IP6_CONFIG_INTERFACE_ID R_Ip6ConfigInterfaceId
> +UINT32 R_Ip6ConfigPolicy
> +EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS
> R_Ip6ConfigDadTransmits
> +
> +#
> +# Check Point: Call Ip6Config->GetData to set AltInterfaceId
> +#
> +SetVar R_Ip6ConfigDataType $IP6CDT(AltInterfaceId)
> +SetVar R_Ip6ConfigDataSize [Sizeof EFI_IP6_CONFIG_INTERFACE_ID]
> +SetVar R_Ip6ConfigInterfaceId.Id(0) 0
> +SetVar R_Ip6ConfigInterfaceId.Id(1) 1
> +SetVar R_Ip6ConfigInterfaceId.Id(2) 2
> +SetVar R_Ip6ConfigInterfaceId.Id(3) 3
> +SetVar R_Ip6ConfigInterfaceId.Id(4) 4
> +SetVar R_Ip6ConfigInterfaceId.Id(5) 5
> +SetVar R_Ip6ConfigInterfaceId.Id(6) 6
> +SetVar R_Ip6ConfigInterfaceId.Id(7) 7
> +
> +SetVar R_Context 0
> +BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1,
> &@R_Context,\
> + &@R_DoneEvent, &@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "BS.CreateEvent." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +Ip6Config->RegisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.RegisterDataNotify - Register notification event for
> configuration." \
> + "ReturnStatus - $R_Status, ExpectedStatus -
> $EFI_SUCCESS"
> +
> +Ip6Config->SetData
> "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigInterfaceId,&
> @R_Status"
> +GetAck
> +GetVar R_Status
> +if { $R_Status == $EFI_SUCCESS } {
> + set assert pass
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.GetData - Call GetData to set AltInterfaceId." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +} elseif { $R_Status == $EFI_NOT_READY } {
> + set i 0
> + set L_TimeOut 30
> + while { 1 > 0 } {
> + GetVar R_Context
> + if { $R_Context == 1 } {
> + break
> + } elseif { $i == $L_TimeOut } {
> + set assert fail
> + RecordAssertion $assert $GenericAssertionGuid \
> + "GetData failed.(event hasn't been signaled before TIMEOUT)."
> \
> + "TIMEOUT value is $L_TimeOut (sec), "
> + SetVar R_Ip6ConfigDataType $IP6CDT(AltInterfaceId)
> + Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_GETDATA_FUNC1
> + EndLog
> + return
> + }
> + incr i
> + Stall 1
> + }
> +} else {
> + set assert fail
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.GetData - Call GetData to set AltInterfaceId." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> + SetVar R_Ip6ConfigDataType $IP6CDT(AltInterfaceId)
> + Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_GETDATA_FUNC1
> + EndLog
> + return
> +}
> +
> +Ip6Config->GetData
> "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigInterfaceId,
> &@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $Ip6ConfigGetDataFunc1AssertionGuid001 \
> + "Ip6Config.GetData - Call GetData to get AltInterfaceId value."
> \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +GetVar R_Ip6ConfigInterfaceId
> +if { ${R_Ip6ConfigInterfaceId.Id(0)} == 0 && ${R_Ip6ConfigInterfaceId.Id(1)} ==
> 1 && ${R_Ip6ConfigInterfaceId.Id(2)} == 2 && ${R_Ip6ConfigInterfaceId.Id(3)}
> == 3 && ${R_Ip6ConfigInterfaceId.Id(4)} == 4 && ${R_Ip6ConfigInterfaceId.Id(5)}
> == 5 && ${R_Ip6ConfigInterfaceId.Id(6)} == 6 && ${R_Ip6ConfigInterfaceId.Id(7)}
> == 7} {
> + set assert pass
> +} else {
> + set assert fail
> +}
> +RecordAssertion $assert $Ip6ConfigGetDataFunc1AssertionGuid002 \
> + "Set AltInterfaceId succeeds(event is signaled correctly and data
> correct)."
> +
> +#
> +# Check Point: Call Ip6Config->SetData to set DadXmits
> +#
> +SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> +SetVar R_Ip6ConfigDataSize [Sizeof
> EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS]
> +SetVar R_Ip6ConfigDadTransmits.DupAddrDetectTransmits 3
> +
> +SetVar R_Context1 0
> +BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1,
> &@R_Context1,\
> + &@R_DoneEvent1, &@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "BS.CreateEvent." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +Ip6Config->RegisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.RegisterDataNotify - Register notification event for
> configuration." \
> + "ReturnStatus - $R_Status, ExpectedStatus -
> $EFI_SUCCESS"
> +
> +Ip6Config->SetData
> "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigDadTransmits,
> &@R_Status"
> +GetAck
> +GetVar R_Status
> +if { $R_Status == $EFI_SUCCESS } {
> + set assert pass
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.GetData - Call GetData to set DadXmits." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +} elseif { $R_Status == $EFI_NOT_READY } {
> + set i 0
> + set L_TimeOut 30
> + while { 1 > 0 } {
> + GetVar R_Context1
> + if { $R_Context1 == 1 } {
> + break
> + } elseif { $i == $L_TimeOut } {
> + set assert fail
> + RecordAssertion $assert $GenericAssertionGuid \
> + "GetData failed.(event hasn't been signaled before TIMEOUT)."
> \
> + "TIMEOUT value is $L_TimeOut (sec), "
> + SetVar R_Ip6ConfigDataType $IP6CDT(AltInterfaceId)
> + Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + SetVar R_Ip6ConfigDataType
> $IP6CDT(DupAddrDetectTransmits)
> + Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_GETDATA_FUNC1
> + EndLog
> + return
> + }
> + incr i
> + Stall 1
> + }
> +} else {
> + set assert fail
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.GetData - Call GetData to set manual DadXmits." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> + SetVar R_Ip6ConfigDataType $IP6CDT(AltInterfaceId)
> + Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> + Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_GETDATA_FUNC1
> + EndLog
> + return
> +}
> +
> +Ip6Config->GetData
> "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigDadTransmit
> s,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $Ip6ConfigGetDataFunc1AssertionGuid003 \
> + "Ip6Config.GetData - Call GetData to get DadXmits value." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +GetVar R_Ip6ConfigDadTransmits
> +if { ${R_Ip6ConfigDadTransmits.DupAddrDetectTransmits} == 3 } {
> + set assert pass
> +} else {
> + set assert fail
> +}
> +RecordAssertion $assert $Ip6ConfigGetDataFunc1AssertionGuid004 \
> + "Set DadXmits succeeds(event is signaled correctly and data
> correct)."
> +
> +#
> +# Clean up
> +#
> +SetVar R_Ip6ConfigDataType $IP6CDT(AltInterfaceId)
> +Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.UnregisterDataNotify - Unregister notification event for
> configuration." \
> + "ReturnStatus - $R_Status, ExpectedStatus -
> $EFI_SUCCESS"
> +BS->CloseEvent {@R_DoneEvent,&@R_Status}
> +GetAck
> +
> +SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> +Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.UnregisterDataNotify - Unregister notification event for
> configuration." \
> + "ReturnStatus - $R_Status, ExpectedStatus -
> $EFI_SUCCESS"
> +BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> +GetAck
> +
> +EndScope _IP6CONFIG_GETDATA_FUNC1
> +
> EndLog
> \ No newline at end of file
> diff --git a/uefi-sct/EMS/Bin/TestCase/IP6Config/Include/Ip6Config.inc.tcl
> b/uefi-sct/EMS/Bin/TestCase/IP6Config/Include/Ip6Config.inc.tcl
> index 918038d..9e162e7 100644
> --- a/uefi-sct/EMS/Bin/TestCase/IP6Config/Include/Ip6Config.inc.tcl
> +++ b/uefi-sct/EMS/Bin/TestCase/IP6Config/Include/Ip6Config.inc.tcl
> @@ -1,96 +1,96 @@
> -#
> -# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
> -# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
> -#
> -# This program and the accompanying materials
> -# are licensed and made available under the terms and conditions of the BSD
> License
> -# which accompanies this distribution. The full text of the license may be
> found at
> -# http://opensource.org/licenses/bsd-license.php
> -#
> -# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS"
> BASIS,
> -# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER
> EXPRESS OR IMPLIED.
> -#
> -if {[info exist IP6CONFIG_INC] == 1} {
> - return
> -}
> -set IP6CONFIG_INC 1
> -
> -Include Include/EntsProtocolTest.inc.tcl
> -Include Include/EntsConfigure.tcl
> -Include Include/EfiBootService.inc.tcl
> -Include Include/EfiGenericService.inc.tcl
> -Include EfiUtil/EfiInclude.tcl
> -
> -Include IP6/Include/Ip6.inc.tcl
> -Include IP6Config/Include/Ip6ConfigDefine.tcl
> -Include IP6Config/Include/Ip6Config.proc.tcl
> -Include IP6Config/Include/Ip6ConfigAssertionGuid.tcl
> -Include Include/GenericAssertionGuid.tcl
> -
> -
> #################################################################
> ##
> -# Function Declaration
> -
> #################################################################
> ##
> -Func Ip6Config->SetData {
> - UINT32
> - UINTN
> - POINTER
> - POINTER
> -}
> -
> -Func Ip6Config->GetData {
> - UINT32
> - POINTER
> - POINTER
> - POINTER
> -}
> -
> -Func Ip6Config->RegisterDataNotify {
> - UINT32
> - UINTN
> - POINTER
> -}
> -
> -Func Ip6Config->UnregisterDataNotify {
> - UINT32
> - UINTN
> - POINTER
> -}
> -
> -
> -
> #################################################################
> ##
> -# EFI_IP6_CONFIG_INTERFACE_INFO
> -
> #################################################################
> ##
> -Struct EFI_IP6_CONFIG_INTERFACE_INFO {
> - CHAR16 Name(32);
> - UINT8 IfType;
> - UINT32 HwAddressSize;
> - EFI_MAC_ADDRESS HwAddress;
> - UINT32 AddressInfoCount;
> - POINTER AddressInfo;
> - UINT32 RouteCount;
> - POINTER RouteTable;
> -}
> -
> -
> #################################################################
> ##
> -# EFI_IP6_CONFIG_INTERFACE_ID
> -
> #################################################################
> ##
> -Struct EFI_IP6_CONFIG_INTERFACE_ID {
> - UINT8 Id(8);
> -}
> -
> -
> #################################################################
> ##
> -# EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS
> -
> #################################################################
> ##
> -Struct EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS {
> - UINT32 DupAddrDetectTransmits;
> -}
> -
> -
> #################################################################
> ##
> -# EFI_IP6_CONFIG_MANUAL_ADDRESS
> -
> #################################################################
> ##
> -Struct EFI_IP6_CONFIG_MANUAL_ADDRESS {
> - EFI_IPv6_ADDRESS Address;
> - BOOLEAN IsAnycast;
> - UINT8 PrefixLength;
> -}
> -
> +#
> +# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
> +# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
> +#
> +# This program and the accompanying materials
> +# are licensed and made available under the terms and conditions of the BSD
> License
> +# which accompanies this distribution. The full text of the license may be
> found at
> +# http://opensource.org/licenses/bsd-license.php
> +#
> +# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS"
> BASIS,
> +# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER
> EXPRESS OR IMPLIED.
> +#
> +if {[info exist IP6CONFIG_INC] == 1} {
> + return
> +}
> +set IP6CONFIG_INC 1
> +
> +Include Include/EntsProtocolTest.inc.tcl
> +Include Include/EntsConfigure.tcl
> +Include Include/EfiBootService.inc.tcl
> +Include Include/EfiGenericService.inc.tcl
> +Include EfiUtil/EfiInclude.tcl
> +
> +Include IP6/Include/Ip6.inc.tcl
> +Include IP6Config/Include/Ip6ConfigDefine.tcl
> +Include IP6Config/Include/Ip6Config.proc.tcl
> +Include IP6Config/Include/Ip6ConfigAssertionGuid.tcl
> +Include Include/GenericAssertionGuid.tcl
> +
> +################################################################
> ###
> +# Function Declaration
> +################################################################
> ###
> +Func Ip6Config->SetData {
> + UINT32
> + UINTN
> + POINTER
> + POINTER
> +}
> +
> +Func Ip6Config->GetData {
> + UINT32
> + POINTER
> + POINTER
> + POINTER
> +}
> +
> +Func Ip6Config->RegisterDataNotify {
> + UINT32
> + UINTN
> + POINTER
> +}
> +
> +Func Ip6Config->UnregisterDataNotify {
> + UINT32
> + UINTN
> + POINTER
> +}
> +
> +
> +################################################################
> ###
> +# EFI_IP6_CONFIG_INTERFACE_INFO
> +################################################################
> ###
> +Struct EFI_IP6_CONFIG_INTERFACE_INFO {
> + CHAR16 Name(32);
> + UINT8 IfType;
> + UINT32 HwAddressSize;
> + EFI_MAC_ADDRESS HwAddress;
> + UINT32 AddressInfoCount;
> + POINTER AddressInfo;
> + UINT32 RouteCount;
> + POINTER RouteTable;
> +}
> +
> +################################################################
> ###
> +# EFI_IP6_CONFIG_INTERFACE_ID
> +################################################################
> ###
> +Struct EFI_IP6_CONFIG_INTERFACE_ID {
> + UINT8 Id(8);
> +}
> +
> +################################################################
> ###
> +# EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS
> +################################################################
> ###
> +Struct EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS {
> + UINT32 DupAddrDetectTransmits;
> +}
> +
> +################################################################
> ###
> +# EFI_IP6_CONFIG_MANUAL_ADDRESS
> +################################################################
> ###
> +Struct EFI_IP6_CONFIG_MANUAL_ADDRESS {
> + EFI_IPv6_ADDRESS Address;
> + BOOLEAN IsAnycast;
> + UINT8 PrefixLength;
> +}
> +
> diff --git a/uefi-sct/EMS/Bin/TestCase/IP6Config/Include/Ip6Config.proc.tcl
> b/uefi-sct/EMS/Bin/TestCase/IP6Config/Include/Ip6Config.proc.tcl
> index de40066..f2a2dda 100644
> --- a/uefi-sct/EMS/Bin/TestCase/IP6Config/Include/Ip6Config.proc.tcl
> +++ b/uefi-sct/EMS/Bin/TestCase/IP6Config/Include/Ip6Config.proc.tcl
> @@ -1,16 +1,16 @@
> -#
> -# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
> -# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
> -#
> -# This program and the accompanying materials
> -# are licensed and made available under the terms and conditions of the BSD
> License
> -# which accompanies this distribution. The full text of the license may be
> found at
> -# http://opensource.org/licenses/bsd-license.php
> -#
> -# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS"
> BASIS,
> -# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER
> EXPRESS OR IMPLIED.
> -#
> -if {[info exist IP6CONFIG_PROC] == 1} {
> - return
> -}
> +#
> +# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
> +# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
> +#
> +# This program and the accompanying materials
> +# are licensed and made available under the terms and conditions of the BSD
> License
> +# which accompanies this distribution. The full text of the license may be
> found at
> +# http://opensource.org/licenses/bsd-license.php
> +#
> +# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS"
> BASIS,
> +# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER
> EXPRESS OR IMPLIED.
> +#
> +if {[info exist IP6CONFIG_PROC] == 1} {
> + return
> +}
> set IP6CONFIG_PROC 1
> \ No newline at end of file
> diff --git a/uefi-
> sct/EMS/Bin/TestCase/IP6Config/Include/Ip6ConfigAssertionGuid.tcl b/uefi-
> sct/EMS/Bin/TestCase/IP6Config/Include/Ip6ConfigAssertionGuid.tcl
> index 9356240..da69bf9 100644
> --- a/uefi-sct/EMS/Bin/TestCase/IP6Config/Include/Ip6ConfigAssertionGuid.tcl
> +++ b/uefi-sct/EMS/Bin/TestCase/IP6Config/Include/Ip6ConfigAssertionGuid.tcl
> @@ -1,84 +1,96 @@
> -#
> -# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
> -# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
> -#
> -# This program and the accompanying materials
> -# are licensed and made available under the terms and conditions of the BSD
> License
> -# which accompanies this distribution. The full text of the license may be
> found at
> -# http://opensource.org/licenses/bsd-license.php
> -#
> -# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS"
> BASIS,
> -# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER
> EXPRESS OR IMPLIED.
> -#
> -#
> -# Guid for SetData() interface
> -#
> -set Ip6ConfigSetDataConf1AssertionGuid001 7A224CCE-B79B-472a-9B8C-
> A47E074D5EEF
> -set Ip6ConfigSetDataConf2AssertionGuid001 46F12872-61F2-46e4-A2F9-
> 5F685B419479
> -set Ip6ConfigSetDataConf2AssertionGuid002 1CAC93D3-732A-4e30-894D-
> EE63B6F486A0
> -set Ip6ConfigSetDataConf2AssertionGuid003 D005EBF3-CFD6-498a-9005-
> C2B3702EB4FC
> -set Ip6ConfigSetDataConf2AssertionGuid004 389806D5-4506-4319-8D17-
> 9B4FC9D97E25
> -set Ip6ConfigSetDataConf2AssertionGuid005 5AEFDB0C-322F-49c3-9DD2-
> DFE21B66B308
> -set Ip6ConfigSetDataConf2AssertionGuid006 D339988F-2595-4fb5-81AE-
> A94DC470B234
> -set Ip6ConfigSetDataConf3AssertionGuid001 4319A43B-7641-47c0-84BB-
> 985C479902A2
> -set Ip6ConfigSetDataConf4AssertionGuid001 01F3B344-EB52-4086-B949-
> 55D7E4DC5BDE
> -set Ip6ConfigSetDataConf4AssertionGuid002 F612AF26-2519-497c-B205-
> 37A2914AEE05
> -set Ip6ConfigSetDataConf4AssertionGuid003 592C1F3D-249E-4654-B4B1-
> 600421624DD1
> -set Ip6ConfigSetDataConf5AssertionGuid001 D70BEC29-8026-4e1b-BA8B-
> 36A313B45859
> -set Ip6ConfigSetDataConf5AssertionGuid002 FE793490-53F8-4991-8348-
> E624530E83E9
> -set Ip6ConfigSetDataConf5AssertionGuid003 42CCB2EF-D706-4d1a-B247-
> F42BBA99F707
> -set Ip6ConfigSetDataConf5AssertionGuid004 9168CB20-C891-42da-BB9F-
> 7ADBE488B012
> -set Ip6ConfigSetDataConf5AssertionGuid005 AD058D87-1015-4b2d-A351-
> 5BD4B0930B7B
> -set Ip6ConfigSetDataConf5AssertionGuid006 388BE3F6-D63E-4cbf-A3D9-
> 3D941823259B
> -set Ip6ConfigSetDataConf6AssertionGuid001 2886BAE1-383A-400f-8F88-
> 66376B2A0FF5
> -set Ip6ConfigSetDataConf7AssertionGuid001 D2C61F06-8822-4a09-89A1-
> 7F0667FCAF0E
> -set Ip6ConfigSetDataFunc1AssertionGuid001 0A5902DA-4142-4494-AC66-
> 2B731FFEA671
> -set Ip6ConfigSetDataFunc1AssertionGuid002 D9A9EF5E-D819-49d0-BB12-
> 25ADEC52DDB3
> -set Ip6ConfigSetDataFunc1AssertionGuid003 14E96019-0815-4486-916C-
> E440E166628E
> -set Ip6ConfigSetDataFunc1AssertionGuid004 3458BBE0-0D7E-48ec-B380-
> 2A885F44E104
> -
> -
> -#
> -# Guid for GetData() interface
> -#
> -set Ip6ConfigGetDataConf1AssertionGuid001 D15E421D-6228-4fea-8D5A-
> 330FFF3F80D2
> -set Ip6ConfigGetDataConf2AssertionGuid001 38B36C04-12E9-4e96-B24F-
> C453851E6C1D
> -set Ip6ConfigGetDataConf3AssertionGuid001 D05A6C59-617F-4549-9659-
> 4E0CFC3C3336
> -set Ip6ConfigGetDataConf3AssertionGuid002 ED45C2FE-9EC1-4553-AFA4-
> 771E9D4F7611
> -set Ip6ConfigGetDataConf4AssertionGuid001 59118C46-2F2A-4029-ABD6-
> 767418920369
> -set Ip6ConfigGetDataConf5AssertionGuid001 55955D09-C806-4777-9FF0-
> 95C00E79AC28
> -set Ip6ConfigGetDataFunc1AssertionGuid001 FEAAC1A0-95BD-4dcb-91C3-
> 9F08504BEFA1
> -set Ip6ConfigGetDataFunc1AssertionGuid002 3649D729-D6D0-456e-84AE-
> C7E7B8464343
> -set Ip6ConfigGetDataFunc1AssertionGuid003 165E79B4-C987-4100-8AA2-
> 8AB115B07FAD
> -set Ip6ConfigGetDataFunc1AssertionGuid004 DB420311-17F7-40cf-A0B1-
> 0294D5DCCC92
> -
> -#
> -# Guid for RegisterDataNotify() interface
> -#
> -set Ip6ConfigRegisterDataNotifyConf1AssertionGuid001 7E3F6157-EC75-4ecd-
> A79B-4926F3AA1C0D
> -set Ip6ConfigRegisterDataNotifyConf2AssertionGuid001 70DC8C71-C54D-
> 4446-8AD9-BAC086E43D17
> -set Ip6ConfigRegisterDataNotifyConf3AssertionGuid001 2D88F18B-0BEF-4616-
> BDE5-CA4E0086E1D3
> -set Ip6ConfigRegisterDataNotifyFunc1AssertionGuid001 9A98DC85-D018-
> 45aa-B851-34EE2F6716D4
> -set Ip6ConfigRegisterDataNotifyFunc1AssertionGuid002 39F7FB37-9F9F-485e-
> 8DBC-0F3191DA9909
> -set Ip6ConfigRegisterDataNotifyFunc1AssertionGuid003 D13DA599-37E7-
> 474a-9343-83C9EFE80893
> -set Ip6ConfigRegisterDataNotifyFunc1AssertionGuid004 5428BDD5-4332-
> 4e3b-841F-3E60540AA35D
> -set Ip6ConfigRegisterDataNotifyFunc1AssertionGuid005 1844A7C8-730C-4927-
> 8E02-CE0A6CA08DCC
> -set Ip6ConfigRegisterDataNotifyFunc1AssertionGuid006 B0E66591-9076-48e3-
> 8DF6-2A1D59A572DB
> -
> -
> -#
> -# Guid for UnregisterDataNotify() interface
> -#
> -set Ip6ConfigUnregisterDataNotifyConf1AssertionGuid001 8AB0E5A2-A4E1-
> 4282-87B5-E377C763AD2F
> -set Ip6ConfigUnregisterDataNotifyConf2AssertionGuid001 5C68228F-AAAE-
> 4d0b-9927-7664476EF360
> -set Ip6ConfigUnregisterDataNotifyConf2AssertionGuid002 55D8193E-F58E-
> 4800-924B-73C902098DD8
> -set Ip6ConfigUnregisterDataNotifyFunc1AssertionGuid001 42EB4628-8DF6-
> 4704-81E5-F7EAE6CBB270
> -set Ip6ConfigUnregisterDataNotifyFunc1AssertionGuid002 174CEC07-E573-
> 434b-8E99-77F8AE9C55B5
> -set Ip6ConfigUnregisterDataNotifyFunc1AssertionGuid003 1F5EF1AF-8A19-
> 48d6-831F-51BE00B32AA5
> -set Ip6ConfigUnregisterDataNotifyFunc1AssertionGuid004 388C8838-7790-
> 4a1f-9DB7-5017D7AA60DB
> -
> -
> -
> -
> -
> -
> +#
> +# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
> +# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
> +#
> +# This program and the accompanying materials
> +# are licensed and made available under the terms and conditions of the BSD
> License
> +# which accompanies this distribution. The full text of the license may be
> found at
> +# http://opensource.org/licenses/bsd-license.php
> +#
> +# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS"
> BASIS,
> +# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER
> EXPRESS OR IMPLIED.
> +#
> +#
> +# Guid for SetData() interface
> +#
> +set Ip6ConfigSetDataConf1AssertionGuid001 7A224CCE-B79B-472a-9B8C-
> A47E074D5EEF
> +set Ip6ConfigSetDataConf2AssertionGuid001 46F12872-61F2-46e4-A2F9-
> 5F685B419479
> +set Ip6ConfigSetDataConf2AssertionGuid002 1CAC93D3-732A-4e30-894D-
> EE63B6F486A0
> +set Ip6ConfigSetDataConf2AssertionGuid003 D005EBF3-CFD6-498a-9005-
> C2B3702EB4FC
> +set Ip6ConfigSetDataConf2AssertionGuid004 389806D5-4506-4319-8D17-
> 9B4FC9D97E25
> +set Ip6ConfigSetDataConf2AssertionGuid005 5AEFDB0C-322F-49c3-9DD2-
> DFE21B66B308
> +set Ip6ConfigSetDataConf2AssertionGuid006 D339988F-2595-4fb5-81AE-
> A94DC470B234
> +set Ip6ConfigSetDataConf3AssertionGuid001 4319A43B-7641-47c0-84BB-
> 985C479902A2
> +set Ip6ConfigSetDataConf4AssertionGuid001 01F3B344-EB52-4086-B949-
> 55D7E4DC5BDE
> +set Ip6ConfigSetDataConf4AssertionGuid002 F612AF26-2519-497c-B205-
> 37A2914AEE05
> +set Ip6ConfigSetDataConf4AssertionGuid003 592C1F3D-249E-4654-B4B1-
> 600421624DD1
> +set Ip6ConfigSetDataConf5AssertionGuid001 D70BEC29-8026-4e1b-BA8B-
> 36A313B45859
> +set Ip6ConfigSetDataConf5AssertionGuid002 FE793490-53F8-4991-8348-
> E624530E83E9
> +set Ip6ConfigSetDataConf5AssertionGuid003 42CCB2EF-D706-4d1a-B247-
> F42BBA99F707
> +set Ip6ConfigSetDataConf5AssertionGuid004 9168CB20-C891-42da-BB9F-
> 7ADBE488B012
> +set Ip6ConfigSetDataConf5AssertionGuid005 AD058D87-1015-4b2d-A351-
> 5BD4B0930B7B
> +set Ip6ConfigSetDataConf5AssertionGuid006 388BE3F6-D63E-4cbf-A3D9-
> 3D941823259B
> +set Ip6ConfigSetDataConf6AssertionGuid001 2886BAE1-383A-400f-8F88-
> 66376B2A0FF5
> +set Ip6ConfigSetDataConf7AssertionGuid001 D2C61F06-8822-4a09-89A1-
> 7F0667FCAF0E
> +set Ip6ConfigSetDataFunc1AssertionGuid001 0A5902DA-4142-4494-AC66-
> 2B731FFEA671
> +set Ip6ConfigSetDataFunc1AssertionGuid002 D9A9EF5E-D819-49d0-BB12-
> 25ADEC52DDB3
> +set Ip6ConfigSetDataFunc1AssertionGuid003 14E96019-0815-4486-916C-
> E440E166628E
> +set Ip6ConfigSetDataFunc1AssertionGuid004 3458BBE0-0D7E-48ec-B380-
> 2A885F44E104
> +
> +set Ip6ConfigSetDataFunc2AssertionGuid001 B533A7CF-6C27-421A-A816-
> B075E7EA4573
> +set Ip6ConfigSetDataFunc2AssertionGuid002 C816C0EE-52C0-400E-A9CC-
> 25C263E27B04
> +set Ip6ConfigSetDataFunc2AssertionGuid003 2CF2435A-C444-4E09-BC8A-
> 56A6F33CED9C
> +set Ip6ConfigSetDataFunc2AssertionGuid004 3B673875-4CE8-4F23-8FE1-
> E440376604FD
> +set Ip6ConfigSetDataFunc2AssertionGuid005 05B7BF41-9CE9-481B-B9A4-
> 2E83AD5E89E3
> +set Ip6ConfigSetDataFunc2AssertionGuid006 4D49A668-A44D-4D69-9F20-
> 40B7F147988E
> +set Ip6ConfigSetDataFunc2AssertionGuid007 23000969-DFDE-4B04-AD44-
> 0844D595AA66
> +set Ip6ConfigSetDataFunc2AssertionGuid008 E444B75C-B559-48C4-8D15-
> 8F882AC7F81E
> +set Ip6ConfigSetDataFunc2AssertionGuid009 AC649D07-2063-4045-9DAE-
> 29B4E38E46BB
> +set Ip6ConfigSetDataFunc2AssertionGuid010 4EDBB740-405F-4E6D-A4A5-
> D77122D16278
> +set Ip6ConfigSetDataFunc2AssertionGuid011 D131A6D9-CCAB-4460-8402-
> 80ED252FEB09
> +set Ip6ConfigSetDataFunc2AssertionGuid012 A5D75088-D8D3-47DD-A623-
> F6098DF70546
> +
> +#
> +# Guid for GetData() interface
> +#
> +set Ip6ConfigGetDataConf1AssertionGuid001 D15E421D-6228-4fea-8D5A-
> 330FFF3F80D2
> +set Ip6ConfigGetDataConf2AssertionGuid001 38B36C04-12E9-4e96-B24F-
> C453851E6C1D
> +set Ip6ConfigGetDataConf3AssertionGuid001 D05A6C59-617F-4549-9659-
> 4E0CFC3C3336
> +set Ip6ConfigGetDataConf3AssertionGuid002 ED45C2FE-9EC1-4553-AFA4-
> 771E9D4F7611
> +set Ip6ConfigGetDataConf4AssertionGuid001 59118C46-2F2A-4029-ABD6-
> 767418920369
> +set Ip6ConfigGetDataConf5AssertionGuid001 55955D09-C806-4777-9FF0-
> 95C00E79AC28
> +set Ip6ConfigGetDataFunc1AssertionGuid001 FEAAC1A0-95BD-4dcb-91C3-
> 9F08504BEFA1
> +set Ip6ConfigGetDataFunc1AssertionGuid002 3649D729-D6D0-456e-84AE-
> C7E7B8464343
> +set Ip6ConfigGetDataFunc1AssertionGuid003 165E79B4-C987-4100-8AA2-
> 8AB115B07FAD
> +set Ip6ConfigGetDataFunc1AssertionGuid004 DB420311-17F7-40cf-A0B1-
> 0294D5DCCC92
> +
> +#
> +# Guid for RegisterDataNotify() interface
> +#
> +set Ip6ConfigRegisterDataNotifyConf1AssertionGuid001 7E3F6157-EC75-4ecd-
> A79B-4926F3AA1C0D
> +set Ip6ConfigRegisterDataNotifyConf2AssertionGuid001 70DC8C71-C54D-
> 4446-8AD9-BAC086E43D17
> +set Ip6ConfigRegisterDataNotifyConf3AssertionGuid001 2D88F18B-0BEF-
> 4616-BDE5-CA4E0086E1D3
> +set Ip6ConfigRegisterDataNotifyFunc1AssertionGuid001 9A98DC85-D018-
> 45aa-B851-34EE2F6716D4
> +set Ip6ConfigRegisterDataNotifyFunc1AssertionGuid002 39F7FB37-9F9F-485e-
> 8DBC-0F3191DA9909
> +set Ip6ConfigRegisterDataNotifyFunc1AssertionGuid003 D13DA599-37E7-
> 474a-9343-83C9EFE80893
> +set Ip6ConfigRegisterDataNotifyFunc1AssertionGuid004 5428BDD5-4332-
> 4e3b-841F-3E60540AA35D
> +set Ip6ConfigRegisterDataNotifyFunc1AssertionGuid005 1844A7C8-730C-
> 4927-8E02-CE0A6CA08DCC
> +set Ip6ConfigRegisterDataNotifyFunc1AssertionGuid006 B0E66591-9076-
> 48e3-8DF6-2A1D59A572DB
> +
> +
> +#
> +# Guid for UnregisterDataNotify() interface
> +#
> +set Ip6ConfigUnregisterDataNotifyConf1AssertionGuid001 8AB0E5A2-A4E1-
> 4282-87B5-E377C763AD2F
> +set Ip6ConfigUnregisterDataNotifyConf2AssertionGuid001 5C68228F-AAAE-
> 4d0b-9927-7664476EF360
> +set Ip6ConfigUnregisterDataNotifyConf2AssertionGuid002 55D8193E-F58E-
> 4800-924B-73C902098DD8
> +set Ip6ConfigUnregisterDataNotifyFunc1AssertionGuid001 42EB4628-8DF6-
> 4704-81E5-F7EAE6CBB270
> +set Ip6ConfigUnregisterDataNotifyFunc1AssertionGuid002 174CEC07-E573-
> 434b-8E99-77F8AE9C55B5
> +set Ip6ConfigUnregisterDataNotifyFunc1AssertionGuid003 1F5EF1AF-8A19-
> 48d6-831F-51BE00B32AA5
> +set Ip6ConfigUnregisterDataNotifyFunc1AssertionGuid004 388C8838-7790-
> 4a1f-9DB7-5017D7AA60DB
> +
> +
> +
> +
> +
> +
> diff --git a/uefi-sct/EMS/Bin/TestCase/IP6Config/Include/Ip6ConfigDefine.tcl
> b/uefi-sct/EMS/Bin/TestCase/IP6Config/Include/Ip6ConfigDefine.tcl
> index 0d78321..1fcd579 100644
> --- a/uefi-sct/EMS/Bin/TestCase/IP6Config/Include/Ip6ConfigDefine.tcl
> +++ b/uefi-sct/EMS/Bin/TestCase/IP6Config/Include/Ip6ConfigDefine.tcl
> @@ -1,51 +1,51 @@
> -#
> -# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
> -# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
> -#
> -# This program and the accompanying materials
> -# are licensed and made available under the terms and conditions of the BSD
> License
> -# which accompanies this distribution. The full text of the license may be
> found at
> -# http://opensource.org/licenses/bsd-license.php
> -#
> -# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS"
> BASIS,
> -# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER
> EXPRESS OR IMPLIED.
> -#
> -if {[info exist IP6CONFIG_DEFINE] == 1} {
> - return
> -}
> -set IP6CONFIG_DEFINE 1
> -
> -#
> -# EUT/ENTS Connection Definition
> -#
> -#set DEF_EUT_IP_ADDR "2002:0000:0000:0000:0000:0000:0000:0001"
> -#set DEF_EUT_MAC_ADDR [GetTargetMac]
> -#set DEF_EUT_PRT 0
> -
> -#set DEF_ENTS_IP_ADDR "2002:0000:0000:0000:0000:0000:0000:4321"
> -#set DEF_ENTS_MAC_ADDR [GetHostMac]
> -#set DEF_ENTS_PRT 8888
> -
> -#
> -# EFI_IP6_CONFIG_DATA_TYPE
> -#
> -set IP6CDT(InterfaceInfo) 0
> -set IP6CDT(AltInterfaceId) 1
> -set IP6CDT(Policy) 2
> -set IP6CDT(DupAddrDetectTransmits) 3
> -set IP6CDT(ManualAddress) 4
> -set IP6CDT(Gateway) 5
> -set IP6CDT(DnsServer) 6
> -set IP6CDT(Maximum) 7
> -
> -#
> -# EFI_IP6_CONFIG_POLICY
> -#
> -set IP6CP(Manual) 0
> -set IP6CP(Automatic) 1
> -
> -#
> -# Timers
> -#
> -set i 0
> -set L_TimeOut 30
> +#
> +# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
> +# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
> +#
> +# This program and the accompanying materials
> +# are licensed and made available under the terms and conditions of the BSD
> License
> +# which accompanies this distribution. The full text of the license may be
> found at
> +# http://opensource.org/licenses/bsd-license.php
> +#
> +# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS"
> BASIS,
> +# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER
> EXPRESS OR IMPLIED.
> +#
> +if {[info exist IP6CONFIG_DEFINE] == 1} {
> + return
> +}
> +set IP6CONFIG_DEFINE 1
> +
> +#
> +# EUT/ENTS Connection Definition
> +#
> +#set DEF_EUT_IP_ADDR "2002:0000:0000:0000:0000:0000:0000:0001"
> +#set DEF_EUT_MAC_ADDR [GetTargetMac]
> +#set DEF_EUT_PRT 0
> +
> +#set DEF_ENTS_IP_ADDR "2002:0000:0000:0000:0000:0000:0000:4321"
> +#set DEF_ENTS_MAC_ADDR [GetHostMac]
> +#set DEF_ENTS_PRT 8888
> +
> +#
> +# EFI_IP6_CONFIG_DATA_TYPE
> +#
> +set IP6CDT(InterfaceInfo) 0
> +set IP6CDT(AltInterfaceId) 1
> +set IP6CDT(Policy) 2
> +set IP6CDT(DupAddrDetectTransmits) 3
> +set IP6CDT(ManualAddress) 4
> +set IP6CDT(Gateway) 5
> +set IP6CDT(DnsServer) 6
> +set IP6CDT(Maximum) 7
> +
> +#
> +# EFI_IP6_CONFIG_POLICY
> +#
> +set IP6CP(Manual) 0
> +set IP6CP(Automatic) 1
> +
> +#
> +# Timers
> +#
> +set i 0
> +set L_TimeOut 30
> diff --git a/uefi-
> sct/EMS/Bin/TestCase/IP6Config/RegisterDataNotify.Conf1.Case1.tcl b/uefi-
> sct/EMS/Bin/TestCase/IP6Config/RegisterDataNotify.Conf1.Case1.tcl
> index f8a97a1..aa60cb8 100644
> --- a/uefi-sct/EMS/Bin/TestCase/IP6Config/RegisterDataNotify.Conf1.Case1.tcl
> +++ b/uefi-
> sct/EMS/Bin/TestCase/IP6Config/RegisterDataNotify.Conf1.Case1.tcl
> @@ -1,90 +1,90 @@
> -#
> -# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
> -# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
> -#
> -# This program and the accompanying materials
> -# are licensed and made available under the terms and conditions of the BSD
> License
> -# which accompanies this distribution. The full text of the license may be
> found at
> -# http://opensource.org/licenses/bsd-license.php
> -#
> -# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS"
> BASIS,
> -# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER
> EXPRESS OR IMPLIED.
> -#
> -
> #################################################################
> ###############
> -CaseLevel CONFORMANCE
> -CaseAttribute AUTO
> -CaseVerboseLevel DEFAULT
> -set reportfile report.csv
> -
> -#
> -# test case Name, category, description, GUID...
> -#
> -CaseGuid F76B637C-BA5F-4451-8DF4-A13E1CCAB3A0
> -CaseName RegisterDataNotify.Conf1.Case1
> -CaseCategory IP6Config
> -CaseDescription {RegisterDataNotify must not succeed when event is NULL.}
> -
> -
> #################################################################
> ###############
> -Include IP6Config/Include/Ip6Config.inc.tcl
> -
> -
> -#
> -# Begin log ...
> -#
> -BeginLog
> -
> -#
> -# BeginScope
> -#
> -BeginScope _IP6CONFIG_REGISTERDATANOTIFY_CONF1
> -
> -#
> -# Parameter Definition
> -# R_ represents "Remote EFI Side Parameter"
> -# L_ represents "Local ENTS Side Parameter"
> -#
> -UINTN R_Status
> -UINTN R_Context
> -UINTN R_DoneEvent
> -UINTN R_Ip6ConfigDataSize
> -UINT32 R_Ip6ConfigDataType
> -EFI_IP6_CONFIG_INTERFACE_INFO R_Ip6ConfigInterfaceInfo
> -EFI_IP6_CONFIG_INTERFACE_ID R_Ip6ConfigInterfaceId
> -UINT32 R_Ip6ConfigPolicy
> -EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS R_Ip6ConfigDadTransmits
> -
> -#
> -# Check Point: Call Ip6Config->SetData to set manual policy
> -#
> -SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> -SetVar R_Ip6ConfigDataSize [Sizeof UINT32]
> -SetVar R_Ip6ConfigPolicy $IP6CP(Manual)
> -
> -SetVar R_Context 0
> -BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context,\
> - &@R_DoneEvent, &@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "BS.CreateEvent." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -#
> -# Check Point: Call Ip6Config->RegisterDataNotify with event NULL
> -#
> -Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType, 0 ,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_INVALID_PARAMETER]
> -RecordAssertion $assert $Ip6ConfigRegisterDataNotifyConf1AssertionGuid001
> \
> - "Ip6Config.RegisterDataNotify - Register notification event with the
> event NULL." \
> - "ReturnStatus - $R_Status, ExpectedStatus -
> $EFI_INVALID_PARAMETER"
> -
> -#
> -# Clean up
> -#
> -BS->CloseEvent {@R_DoneEvent,&@R_Status}
> -GetAck
> -
> -EndScope _IP6CONFIG_REGISTERDATANOTIFY_CONF1
> -
> +#
> +# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
> +# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
> +#
> +# This program and the accompanying materials
> +# are licensed and made available under the terms and conditions of the BSD
> License
> +# which accompanies this distribution. The full text of the license may be
> found at
> +# http://opensource.org/licenses/bsd-license.php
> +#
> +# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS"
> BASIS,
> +# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER
> EXPRESS OR IMPLIED.
> +#
> +################################################################
> ################
> +CaseLevel CONFORMANCE
> +CaseAttribute AUTO
> +CaseVerboseLevel DEFAULT
> +set reportfile report.csv
> +
> +#
> +# test case Name, category, description, GUID...
> +#
> +CaseGuid F76B637C-BA5F-4451-8DF4-A13E1CCAB3A0
> +CaseName RegisterDataNotify.Conf1.Case1
> +CaseCategory IP6Config
> +CaseDescription {RegisterDataNotify must not succeed when event is NULL.}
> +
> +################################################################
> ################
> +Include IP6Config/Include/Ip6Config.inc.tcl
> +
> +
> +#
> +# Begin log ...
> +#
> +BeginLog
> +
> +#
> +# BeginScope
> +#
> +BeginScope _IP6CONFIG_REGISTERDATANOTIFY_CONF1
> +
> +#
> +# Parameter Definition
> +# R_ represents "Remote EFI Side Parameter"
> +# L_ represents "Local ENTS Side Parameter"
> +#
> +UINTN R_Status
> +UINTN R_Context
> +UINTN R_DoneEvent
> +UINTN R_Ip6ConfigDataSize
> +UINT32 R_Ip6ConfigDataType
> +EFI_IP6_CONFIG_INTERFACE_INFO R_Ip6ConfigInterfaceInfo
> +EFI_IP6_CONFIG_INTERFACE_ID R_Ip6ConfigInterfaceId
> +UINT32 R_Ip6ConfigPolicy
> +EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS
> R_Ip6ConfigDadTransmits
> +
> +#
> +# Check Point: Call Ip6Config->SetData to set manual policy
> +#
> +SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> +SetVar R_Ip6ConfigDataSize [Sizeof UINT32]
> +SetVar R_Ip6ConfigPolicy $IP6CP(Manual)
> +
> +SetVar R_Context 0
> +BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1,
> &@R_Context,\
> + &@R_DoneEvent, &@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "BS.CreateEvent." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +#
> +# Check Point: Call Ip6Config->RegisterDataNotify with event NULL
> +#
> +Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType, 0 ,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_INVALID_PARAMETER]
> +RecordAssertion $assert $Ip6ConfigRegisterDataNotifyConf1AssertionGuid001
> \
> + "Ip6Config.RegisterDataNotify - Register notification event with the
> event NULL." \
> + "ReturnStatus - $R_Status, ExpectedStatus -
> $EFI_INVALID_PARAMETER"
> +
> +#
> +# Clean up
> +#
> +BS->CloseEvent {@R_DoneEvent,&@R_Status}
> +GetAck
> +
> +EndScope _IP6CONFIG_REGISTERDATANOTIFY_CONF1
> +
> EndLog
> \ No newline at end of file
> diff --git a/uefi-
> sct/EMS/Bin/TestCase/IP6Config/RegisterDataNotify.Conf2.Case1.tcl b/uefi-
> sct/EMS/Bin/TestCase/IP6Config/RegisterDataNotify.Conf2.Case1.tcl
> index 3e72249..38b7431 100644
> --- a/uefi-sct/EMS/Bin/TestCase/IP6Config/RegisterDataNotify.Conf2.Case1.tcl
> +++ b/uefi-
> sct/EMS/Bin/TestCase/IP6Config/RegisterDataNotify.Conf2.Case1.tcl
> @@ -1,90 +1,90 @@
> -#
> -# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
> -# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
> -#
> -# This program and the accompanying materials
> -# are licensed and made available under the terms and conditions of the BSD
> License
> -# which accompanies this distribution. The full text of the license may be
> found at
> -# http://opensource.org/licenses/bsd-license.php
> -#
> -# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS"
> BASIS,
> -# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER
> EXPRESS OR IMPLIED.
> -#
> -
> #################################################################
> ###############
> -CaseLevel CONFORMANCE
> -CaseAttribute AUTO
> -CaseVerboseLevel DEFAULT
> -set reportfile report.csv
> -
> -#
> -# test case Name, category, description, GUID...
> -#
> -CaseGuid E5221141-97BC-4e5f-9ABA-304BB11EADA0
> -CaseName RegisterDataNotify.Conf2.Case1
> -CaseCategory IP6Config
> -CaseDescription {RegisterDataNotify must not succeed when data type is not
> supported.}
> -
> -
> #################################################################
> ###############
> -Include IP6Config/Include/Ip6Config.inc.tcl
> -
> -
> -#
> -# Begin log ...
> -#
> -BeginLog
> -
> -#
> -# BeginScope
> -#
> -BeginScope _IP6CONFIG_REGISTERDATANOTIFY_CONF2
> -
> -#
> -# Parameter Definition
> -# R_ represents "Remote EFI Side Parameter"
> -# L_ represents "Local ENTS Side Parameter"
> -#
> -UINTN R_Status
> -UINTN R_Context
> -UINTN R_DoneEvent
> -UINTN R_Ip6ConfigDataSize
> -UINT32 R_Ip6ConfigDataType
> -UINTN R_Ip6ConfigDataTypeMaximum
> -EFI_IP6_CONFIG_INTERFACE_INFO R_Ip6ConfigInterfaceInfo
> -EFI_IP6_CONFIG_INTERFACE_ID R_Ip6ConfigInterfaceId
> -UINT32 R_Ip6ConfigPolicy
> -EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS R_Ip6ConfigDadTransmits
> -
> -#
> -# Check Point: Call Ip6Config->SetData to set manual policy
> -#
> -SetVar R_Ip6ConfigDataType $IP6CDT(Maximum)
> -SetVar R_Ip6ConfigDataSize [Sizeof UINTN]
> -
> -SetVar R_Context 0
> -BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context,\
> - &@R_DoneEvent, &@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "BS.CreateEvent." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -#
> -# Check Point: Call Ip6Config->RegisterDataNotify with the datatype not
> supported
> -#
> -Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType,
> @R_DoneEvent ,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_UNSUPPORTED]
> -RecordAssertion $assert $Ip6ConfigRegisterDataNotifyConf2AssertionGuid001
> \
> - "Ip6Config.RegisterDataNotify - Register notification event with the
> data type not supported." \
> - "ReturnStatus - $R_Status, ExpectedStatus -
> $EFI_UNSUPPORTED"
> -
> -#
> -# Clean up
> -#
> -BS->CloseEvent {@R_DoneEvent,&@R_Status}
> -GetAck
> -
> -EndScope _IP6CONFIG_REGISTERDATANOTIFY_CONF2
> -
> +#
> +# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
> +# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
> +#
> +# This program and the accompanying materials
> +# are licensed and made available under the terms and conditions of the BSD
> License
> +# which accompanies this distribution. The full text of the license may be
> found at
> +# http://opensource.org/licenses/bsd-license.php
> +#
> +# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS"
> BASIS,
> +# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER
> EXPRESS OR IMPLIED.
> +#
> +################################################################
> ################
> +CaseLevel CONFORMANCE
> +CaseAttribute AUTO
> +CaseVerboseLevel DEFAULT
> +set reportfile report.csv
> +
> +#
> +# test case Name, category, description, GUID...
> +#
> +CaseGuid E5221141-97BC-4e5f-9ABA-304BB11EADA0
> +CaseName RegisterDataNotify.Conf2.Case1
> +CaseCategory IP6Config
> +CaseDescription {RegisterDataNotify must not succeed when data type is not
> supported.}
> +
> +################################################################
> ################
> +Include IP6Config/Include/Ip6Config.inc.tcl
> +
> +
> +#
> +# Begin log ...
> +#
> +BeginLog
> +
> +#
> +# BeginScope
> +#
> +BeginScope _IP6CONFIG_REGISTERDATANOTIFY_CONF2
> +
> +#
> +# Parameter Definition
> +# R_ represents "Remote EFI Side Parameter"
> +# L_ represents "Local ENTS Side Parameter"
> +#
> +UINTN R_Status
> +UINTN R_Context
> +UINTN R_DoneEvent
> +UINTN R_Ip6ConfigDataSize
> +UINT32 R_Ip6ConfigDataType
> +UINTN R_Ip6ConfigDataTypeMaximum
> +EFI_IP6_CONFIG_INTERFACE_INFO R_Ip6ConfigInterfaceInfo
> +EFI_IP6_CONFIG_INTERFACE_ID R_Ip6ConfigInterfaceId
> +UINT32 R_Ip6ConfigPolicy
> +EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS
> R_Ip6ConfigDadTransmits
> +
> +#
> +# Check Point: Call Ip6Config->SetData to set manual policy
> +#
> +SetVar R_Ip6ConfigDataType $IP6CDT(Maximum)
> +SetVar R_Ip6ConfigDataSize [Sizeof UINTN]
> +
> +SetVar R_Context 0
> +BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1,
> &@R_Context,\
> + &@R_DoneEvent, &@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "BS.CreateEvent." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +#
> +# Check Point: Call Ip6Config->RegisterDataNotify with the datatype not
> supported
> +#
> +Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType,
> @R_DoneEvent ,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_UNSUPPORTED]
> +RecordAssertion $assert $Ip6ConfigRegisterDataNotifyConf2AssertionGuid001
> \
> + "Ip6Config.RegisterDataNotify - Register notification event with the
> data type not supported." \
> + "ReturnStatus - $R_Status, ExpectedStatus -
> $EFI_UNSUPPORTED"
> +
> +#
> +# Clean up
> +#
> +BS->CloseEvent {@R_DoneEvent,&@R_Status}
> +GetAck
> +
> +EndScope _IP6CONFIG_REGISTERDATANOTIFY_CONF2
> +
> EndLog
> \ No newline at end of file
> diff --git a/uefi-
> sct/EMS/Bin/TestCase/IP6Config/RegisterDataNotify.Conf3.Case1.tcl b/uefi-
> sct/EMS/Bin/TestCase/IP6Config/RegisterDataNotify.Conf3.Case1.tcl
> index 8c8363c..77d9ef5 100644
> --- a/uefi-sct/EMS/Bin/TestCase/IP6Config/RegisterDataNotify.Conf3.Case1.tcl
> +++ b/uefi-
> sct/EMS/Bin/TestCase/IP6Config/RegisterDataNotify.Conf3.Case1.tcl
> @@ -1,109 +1,109 @@
> -#
> -# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
> -# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
> -#
> -# This program and the accompanying materials
> -# are licensed and made available under the terms and conditions of the BSD
> License
> -# which accompanies this distribution. The full text of the license may be
> found at
> -# http://opensource.org/licenses/bsd-license.php
> -#
> -# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS"
> BASIS,
> -# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER
> EXPRESS OR IMPLIED.
> -#
> -
> #################################################################
> ###############
> -CaseLevel CONFORMANCE
> -CaseAttribute AUTO
> -CaseVerboseLevel DEFAULT
> -set reportfile report.csv
> -
> -#
> -# test case Name, category, description, GUID...
> -#
> -CaseGuid B00EBD2E-F23E-434e-80E8-2A17C3BCFDFE
> -CaseName RegisterDataNotify.Conf3.Case1
> -CaseCategory IP6Config
> -CaseDescription {RegisterDataNotify must not succeed when event has already
> registered.}
> -
> -
> #################################################################
> ###############
> -Include IP6Config/Include/Ip6Config.inc.tcl
> -
> -
> -#
> -# Begin log ...
> -#
> -BeginLog
> -
> -#
> -# BeginScope
> -#
> -BeginScope _IP6CONFIG_REGISTERDATANOTIFY_CONF3
> -
> -#
> -# Parameter Definition
> -# R_ represents "Remote EFI Side Parameter"
> -# L_ represents "Local ENTS Side Parameter"
> -#
> -UINTN R_Status
> -UINTN R_Context
> -UINTN R_DoneEvent
> -UINTN R_Ip6ConfigDataSize
> -UINT32 R_Ip6ConfigDataType
> -EFI_IP6_CONFIG_INTERFACE_INFO R_Ip6ConfigInterfaceInfo
> -EFI_IP6_CONFIG_INTERFACE_ID R_Ip6ConfigInterfaceId
> -UINT32 R_Ip6ConfigPolicy
> -EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS R_Ip6ConfigDadTransmits
> -
> -#
> -# Check Point: Call Ip6Config->SetData to set manual policy
> -#
> -SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> -SetVar R_Ip6ConfigDataSize [Sizeof UINT32]
> -SetVar R_Ip6ConfigPolicy $IP6CP(Manual)
> -
> -SetVar R_Context 0
> -BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context,\
> - &@R_DoneEvent, &@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "BS.CreateEvent." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -#
> -# Check Point: Call Ip6Config->RegisterDataNotify with valid parameters
> -#
> -Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType,
> @R_DoneEvent ,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.RegisterDataNotify - Register notification event with valid
> parameters." \
> - "ReturnStatus - $R_Status, ExpectedStatus -
> $EFI_SUCCESS"
> -
> -#
> -# Check Point : Call RegisterDataNotify() with the same event (has been
> registered)
> -#
> -Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType,
> @R_DoneEvent ,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_ACCESS_DENIED]
> -RecordAssertion $assert $Ip6ConfigRegisterDataNotifyConf3AssertionGuid001
> \
> - "Ip6Config.RegisterDataNotify - Register notification event with the
> event registered already." \
> - "ReturnStatus - $R_Status, ExpectedStatus -
> $EFI_ACCESS_DENIED"
> -
> -
> -#
> -# Clean up
> -#
> -SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> -Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.UnregisterDataNotify - Unregister notification event for
> configuration." \
> - "ReturnStatus - $R_Status, ExpectedStatus -
> $EFI_SUCCESS"
> -
> -BS->CloseEvent {@R_DoneEvent,&@R_Status}
> -GetAck
> -
> -EndScope _IP6CONFIG_REGISTERDATANOTIFY_CONF3
> -
> +#
> +# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
> +# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
> +#
> +# This program and the accompanying materials
> +# are licensed and made available under the terms and conditions of the BSD
> License
> +# which accompanies this distribution. The full text of the license may be
> found at
> +# http://opensource.org/licenses/bsd-license.php
> +#
> +# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS"
> BASIS,
> +# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER
> EXPRESS OR IMPLIED.
> +#
> +################################################################
> ################
> +CaseLevel CONFORMANCE
> +CaseAttribute AUTO
> +CaseVerboseLevel DEFAULT
> +set reportfile report.csv
> +
> +#
> +# test case Name, category, description, GUID...
> +#
> +CaseGuid B00EBD2E-F23E-434e-80E8-2A17C3BCFDFE
> +CaseName RegisterDataNotify.Conf3.Case1
> +CaseCategory IP6Config
> +CaseDescription {RegisterDataNotify must not succeed when event has already
> registered.}
> +
> +################################################################
> ################
> +Include IP6Config/Include/Ip6Config.inc.tcl
> +
> +
> +#
> +# Begin log ...
> +#
> +BeginLog
> +
> +#
> +# BeginScope
> +#
> +BeginScope _IP6CONFIG_REGISTERDATANOTIFY_CONF3
> +
> +#
> +# Parameter Definition
> +# R_ represents "Remote EFI Side Parameter"
> +# L_ represents "Local ENTS Side Parameter"
> +#
> +UINTN R_Status
> +UINTN R_Context
> +UINTN R_DoneEvent
> +UINTN R_Ip6ConfigDataSize
> +UINT32 R_Ip6ConfigDataType
> +EFI_IP6_CONFIG_INTERFACE_INFO R_Ip6ConfigInterfaceInfo
> +EFI_IP6_CONFIG_INTERFACE_ID R_Ip6ConfigInterfaceId
> +UINT32 R_Ip6ConfigPolicy
> +EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS
> R_Ip6ConfigDadTransmits
> +
> +#
> +# Check Point: Call Ip6Config->SetData to set manual policy
> +#
> +SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> +SetVar R_Ip6ConfigDataSize [Sizeof UINT32]
> +SetVar R_Ip6ConfigPolicy $IP6CP(Manual)
> +
> +SetVar R_Context 0
> +BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1,
> &@R_Context,\
> + &@R_DoneEvent, &@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "BS.CreateEvent." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +#
> +# Check Point: Call Ip6Config->RegisterDataNotify with valid parameters
> +#
> +Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType,
> @R_DoneEvent ,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.RegisterDataNotify - Register notification event with valid
> parameters." \
> + "ReturnStatus - $R_Status, ExpectedStatus -
> $EFI_SUCCESS"
> +
> +#
> +# Check Point : Call RegisterDataNotify() with the same event (has been
> registered)
> +#
> +Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType,
> @R_DoneEvent ,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_ACCESS_DENIED]
> +RecordAssertion $assert $Ip6ConfigRegisterDataNotifyConf3AssertionGuid001
> \
> + "Ip6Config.RegisterDataNotify - Register notification event with the
> event registered already." \
> + "ReturnStatus - $R_Status, ExpectedStatus -
> $EFI_ACCESS_DENIED"
> +
> +
> +#
> +# Clean up
> +#
> +SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> +Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.UnregisterDataNotify - Unregister notification event for
> configuration." \
> + "ReturnStatus - $R_Status, ExpectedStatus -
> $EFI_SUCCESS"
> +
> +BS->CloseEvent {@R_DoneEvent,&@R_Status}
> +GetAck
> +
> +EndScope _IP6CONFIG_REGISTERDATANOTIFY_CONF3
> +
> EndLog
> \ No newline at end of file
> diff --git a/uefi-
> sct/EMS/Bin/TestCase/IP6Config/RegisterDataNotify.Func1.Case1.tcl b/uefi-
> sct/EMS/Bin/TestCase/IP6Config/RegisterDataNotify.Func1.Case1.tcl
> index 38be04c..b2b777c 100644
> --- a/uefi-sct/EMS/Bin/TestCase/IP6Config/RegisterDataNotify.Func1.Case1.tcl
> +++ b/uefi-
> sct/EMS/Bin/TestCase/IP6Config/RegisterDataNotify.Func1.Case1.tcl
> @@ -1,539 +1,539 @@
> -#
> -# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
> -# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
> -#
> -# This program and the accompanying materials
> -# are licensed and made available under the terms and conditions of the BSD
> License
> -# which accompanies this distribution. The full text of the license may be
> found at
> -# http://opensource.org/licenses/bsd-license.php
> -#
> -# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS"
> BASIS,
> -# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER
> EXPRESS OR IMPLIED.
> -#
> -
> #################################################################
> ###############
> -CaseLevel FUNCTION
> -CaseAttribute AUTO
> -CaseVerboseLevel DEFAULT
> -set reportfile report.csv
> -
> -#
> -# test case Name, category, description, GUID...
> -#
> -CaseGuid 7D041B9B-4F68-434a-A0C6-63FDC415D078
> -CaseName RegisterDataNotify.Func1.Case1
> -CaseCategory IP6Config
> -CaseDescription {RegisterDataNotify must succeed with valid parameters when
> one event registered on one data type.}
> -
> -
> #################################################################
> ###############
> -Include IP6Config/Include/Ip6Config.inc.tcl
> -
> -
> -#
> -# Begin log ...
> -#
> -BeginLog
> -
> -#
> -# BeginScope
> -#
> -BeginScope _IP6CONFIG_REGISTERDATANOTIFY_FUNC1_CASE1
> -
> -#
> -# Parameter Definition
> -# R_ represents "Remote EFI Side Parameter"
> -# L_ represents "Local ENTS Side Parameter"
> -#
> -UINTN R_Status
> -UINTN R_Context
> -UINTN R_DoneEvent
> -UINTN R_Context1
> -UINTN R_DoneEvent1
> -UINTN R_Context2
> -UINTN R_DoneEvent2
> -UINTN R_Ip6ConfigDataSize
> -UINT32 R_Ip6ConfigDataType
> -EFI_IP6_CONFIG_INTERFACE_INFO R_Ip6ConfigInterfaceInfo
> -EFI_IP6_CONFIG_INTERFACE_ID R_Ip6ConfigInterfaceId
> -UINT32 R_Ip6ConfigPolicy
> -EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS R_Ip6ConfigDadTransmits
> -
> -#
> -# Check Point: Call Ip6Config->SetData to set manual policy
> -#
> -SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> -SetVar R_Ip6ConfigDataSize [Sizeof UINT32]
> -SetVar R_Ip6ConfigPolicy $IP6CP(Manual)
> -
> -SetVar R_Context 0
> -BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context,\
> - &@R_DoneEvent, &@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "BS.CreateEvent." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -Ip6Config->RegisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.RegisterDataNotify - Register notification event for
> configuration." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -Ip6Config->SetData
> "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_S
> tatus"
> -GetAck
> -GetVar R_Status
> -if { $R_Status == $EFI_SUCCESS } {
> - set assert pass
> - RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.SetData - Call SetData to set manual policy." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -} elseif { $R_Status == $EFI_NOT_READY } {
> - set i 0
> - set L_TimeOut 30
> - while { 1 > 0 } {
> - GetVar R_Context
> - if { $R_Context == 1 } {
> - break
> - } elseif { $i == $L_TimeOut } {
> - set assert fail
> - RecordAssertion $assert $GenericAssertionGuid \
> - "SetData failed.(event hasn't been signaled before TIMEOUT)." \
> - "TIMEOUT value is $L_TimeOut (sec), "
> - SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> - Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - EndScope _IP6CONFIG_REGISTERDATANOTIFY_FUNC1_CASE1
> - EndLog
> - return
> - }
> - incr i
> - Stall 1
> - }
> -} else {
> - set assert fail
> - RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.SetData - Call SetData to set manual policy." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> - SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> - Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - EndScope _IP6CONFIG_REGISTERDATANOTIFY_FUNC1_CASE1
> - EndLog
> - return
> -}
> -
> -Ip6Config->GetData
> "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_
> Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.GetData - Call GetData to get policy value." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -GetVar R_Ip6ConfigPolicy
> -if { $R_Ip6ConfigPolicy == $IP6CP(Manual) } {
> - set assert pass
> -} else {
> - set assert fail
> -
> - RecordAssertion $assert $GenericAssertionGuid \
> - "Set manual policy succeeds(event is signaled correctly and data
> correct)."
> - SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> - Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - EndScope _IP6CONFIG_REGISTERDATANOTIFY_FUNC1_CASE1
> - EndLog
> - return
> -}
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Set manual policy succeeds(event is signaled correctly and data
> correct)."
> -
> -#
> -# Check Point: Call Ip6Config->SetData to set DadXmits 0
> -#
> -SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> -SetVar R_Ip6ConfigDataSize [Sizeof
> EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS]
> -SetVar R_Ip6ConfigDadTransmits.DupAddrDetectTransmits 0
> -
> -SetVar R_Context1 0
> -BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1,
> &@R_Context1,\
> - &@R_DoneEvent1, &@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "BS.CreateEvent." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -Ip6Config->RegisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.RegisterDataNotify - Register notification event for
> configuration." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -Ip6Config->SetData
> "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigDadTransmits,
> &@R_Status"
> -GetAck
> -GetVar R_Status
> -if { $R_Status == $EFI_SUCCESS } {
> - set assert pass
> - RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.SetData - Call SetData to set DadXmits 0." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -} elseif { $R_Status == $EFI_NOT_READY } {
> - set i 0
> - set L_TimeOut 30
> - while { 1 > 0 } {
> - GetVar R_Context1
> - if { $R_Context1 == 1 } {
> - break
> - } elseif { $i == $L_TimeOut } {
> - set assert fail
> - RecordAssertion $assert $GenericAssertionGuid \
> - "SetData failed.(event hasn't been signaled before TIMEOUT)." \
> - "TIMEOUT value is $L_TimeOut (sec), "
> - SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> - Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> - Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> - GetAck
> - EndScope _IP6CONFIG_REGISTERDATANOTIFY_FUNC1_CASE1
> - EndLog
> - return
> - }
> - incr i
> - Stall 1
> - }
> -} else {
> - set assert fail
> - RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.SetData - Call SetData to set DadXmits 0." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> - SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> - Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> - Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> - GetAck
> - EndScope _IP6CONFIG_REGISTERDATANOTIFY_FUNC1_CASE1
> - EndLog
> - return
> -}
> -
> -Ip6Config->GetData
> "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigDadTransmit
> s,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.GetData - Call GetData to get DadXmits value." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -GetVar R_Ip6ConfigDadTransmits.DupAddrDetectTransmits
> -if { ${R_Ip6ConfigDadTransmits.DupAddrDetectTransmits} == 0 } {
> - set assert pass
> -} else {
> - set assert fail
> -
> - RecordAssertion $assert $GenericAssertionGuid \
> - "Set DadXmits succeeds(event is signaled correctly and data correct)."
> - SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> - Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> - Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> - GetAck
> - EndScope _IP6CONFIG_REGISTERDATANOTIFY_FUNC1_CASE1
> - EndLog
> - return
> -}
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Set DadXmits succeeds(event is signaled correctly and data correct)."
> -
> -#
> -# Check Point : Set Manual Address with valid parameter
> -#
> -EFI_IP6_CONFIG_MANUAL_ADDRESS R_Temp_Ip6ConfigManualAddress
> -
> -set L_ManualListLen 1
> -EFI_IP6_CONFIG_MANUAL_ADDRESS R_Ip6ConfigManualAddress
> -set L_UnitLen [Sizeof EFI_IP6_CONFIG_MANUAL_ADDRESS]
> -set L_ListLen [expr {$L_UnitLen * $L_ManualListLen}]
> -SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
> -SetVar R_Ip6ConfigDataSize $L_ListLen
> -SetVar R_Temp_Ip6ConfigManualAddress.IsAnycast FALSE
> -SetVar R_Temp_Ip6ConfigManualAddress.PrefixLength 64
> -SetIpv6Address R_Temp_Ip6ConfigManualAddress.Address "2002::5000"
> -SetVar R_Ip6ConfigManualAddress @R_Temp_Ip6ConfigManualAddress
> -#
> -# Register Event for Manual Address
> -#
> -SetVar R_Context2 0
> -BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1,
> &@R_Context2,\
> - &@R_DoneEvent2, &@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "BS.CreateEvent." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -Ip6Config->RegisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent2,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $Ip6ConfigRegisterDataNotifyFunc1AssertionGuid001
> \
> - "Ip6Config.RegisterDataNotify - Register notification event for
> configuration." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -Ip6Config->SetData
> "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigManualAddres
> s,&@R_Status"
> -GetAck
> -GetVar R_Status
> -if { $R_Status == $EFI_SUCCESS } {
> - set assert pass
> - RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.SetData - Call SetData to set manual address." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -} elseif { $R_Status == $EFI_NOT_READY } {
> - set i 0
> - set L_TimeOut 30
> - while { 1 > 0 } {
> - GetVar R_Context2
> - if { $R_Context2 == 1 } {
> - break
> - } elseif { $i == $L_TimeOut } {
> - set assert fail
> - RecordAssertion $assert $GenericAssertionGuid \
> - "SetData failed.(event hasn't been signaled before TIMEOUT)." \
> - "TIMEOUT value is $L_TimeOut (sec), "
> - SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> - Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> - Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> - GetAck
> - SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
> - Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent2,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent2,&@R_Status}
> - GetAck
> - EndScope _IP6CONFIG_REGISTERDATANOTIFY_FUNC1_CASE1
> - EndLog
> - return
> - }
> - incr i
> - Stall 1
> - }
> -} else {
> - set assert fail
> - RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.SetData - Call SetData to set manual address." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> - SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> - Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> - Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> - GetAck
> - SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
> - Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent2,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent2,&@R_Status}
> - GetAck
> - EndScope _IP6CONFIG_REGISTERDATANOTIFY_FUNC1_CASE1
> - EndLog
> - return
> -}
> -
> -#
> -# Check Events for registered datatype
> -#
> -GetVar R_Context2
> -if { $R_Context2 == 1 } {
> - set assert pass
> -} else {
> - set assert fail
> -}
> -RecordAssertion $assert $Ip6ConfigRegisterDataNotifyFunc1AssertionGuid002
> \
> - "Ip6Config.RegisterDataNotify - Registered event is signaled."
> -
> -#
> -# GetData to verfiy the data setting
> -#
> -Ip6Config->GetData
> "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigManualAddr
> ess,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.GetData - Call GetData to get manual address." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -GetVar R_Ip6ConfigManualAddress.IsAnycast
> -if { ${R_Ip6ConfigManualAddress.IsAnycast} == FALSE } {
> - set assert pass
> -} else {
> - set assert fail
> -}
> -GetVar R_Ip6ConfigManualAddress.PrefixLength
> -if { ${R_Ip6ConfigManualAddress.PrefixLength} == 64 } {
> - set assert pass
> -} else {
> - set assert fail
> -}
> -GetVar R_Ip6ConfigManualAddress.Address
> -set L_ManualAddress "2002:0000:0000:0000:0000:0000:0000:5000"
> -set L_RemoteAddress [ GetIpv6Address {R_Ip6ConfigManualAddress.Address} ]
> -if { [ string compare $L_RemoteAddress $L_ManualAddress ] == 0 } {
> - set assert pass
> -} else {
> - set assert fail
> -}
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Set ManualAddress succeeds(event is signaled correctly and data
> correct)."
> -
> -#
> -# Set automatic policy (this will clean up all address information configured)
> -#
> -SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> -SetVar R_Ip6ConfigDataSize [Sizeof UINT32]
> -SetVar R_Ip6ConfigPolicy $IP6CP(Automatic)
> -
> -SetVar R_Context 0
> -
> -Ip6Config->SetData
> "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_S
> tatus"
> -GetAck
> -GetVar R_Status
> -if { $R_Status == $EFI_SUCCESS } {
> - set assert pass
> -} elseif { $R_Status == $EFI_NOT_READY } {
> - set i 0
> - set L_TimeOut 30
> - set assert pass
> - while { 1 > 0 } {
> - GetVar R_Context
> - if { $R_Context == 1 } {
> - break
> - } elseif { $i == $L_TimeOut } {
> - set assert fail
> -
> - SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> - Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> - Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> - GetAck
> - SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
> - Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent2,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent2,&@R_Status}
> - GetAck
> -
> - EndScope _IP6CONFIG_REGISTERDATANOTIFY_FUNC1_CASE1
> - EndLog
> - return
> - }
> - incr i
> - Stall 1
> - }
> -} else {
> - set assert fail
> -
> - SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> - Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> - Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> - GetAck
> - SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
> - Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent2,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent2,&@R_Status}
> - GetAck
> -
> - EndScope _IP6CONFIG_REGISTERDATANOTIFY_FUNC1_CASE1
> - EndLog
> - return
> -}
> -
> -Ip6Config->GetData
> "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_
> Status"
> -GetAck
> -GetVar R_Ip6ConfigPolicy
> -if { $R_Ip6ConfigPolicy == $IP6CP(Automatic) } {
> - set assert pass
> -} else {
> - set assert fail
> -}
> -
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.SetData - Set automatic policy to clean up the former
> configuration." \
> - "TimeUsed - $i, TimeOut Value- $L_TimeOut"
> -
> -#
> -# Clean up
> -#
> -SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> -Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.UnregisterDataNotify - Unregister notification event for
> configuration." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -BS->CloseEvent {@R_DoneEvent,&@R_Status}
> -GetAck
> -
> -SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> -Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.UnregisterDataNotify - Unregister notification event for
> configuration." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> -GetAck
> -
> -SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
> -Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent2,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.UnregisterDataNotify - Unregister notification event for
> configuration." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -BS->CloseEvent {@R_DoneEvent2,&@R_Status}
> -GetAck
> -
> -EndScope _IP6CONFIG_REGISTERDATANOTIFY_FUNC1_CASE1
> -
> +#
> +# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
> +# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
> +#
> +# This program and the accompanying materials
> +# are licensed and made available under the terms and conditions of the BSD
> License
> +# which accompanies this distribution. The full text of the license may be
> found at
> +# http://opensource.org/licenses/bsd-license.php
> +#
> +# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS"
> BASIS,
> +# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER
> EXPRESS OR IMPLIED.
> +#
> +################################################################
> ################
> +CaseLevel FUNCTION
> +CaseAttribute AUTO
> +CaseVerboseLevel DEFAULT
> +set reportfile report.csv
> +
> +#
> +# test case Name, category, description, GUID...
> +#
> +CaseGuid 7D041B9B-4F68-434a-A0C6-63FDC415D078
> +CaseName RegisterDataNotify.Func1.Case1
> +CaseCategory IP6Config
> +CaseDescription {RegisterDataNotify must succeed with valid parameters when
> one event registered on one data type.}
> +
> +################################################################
> ################
> +Include IP6Config/Include/Ip6Config.inc.tcl
> +
> +
> +#
> +# Begin log ...
> +#
> +BeginLog
> +
> +#
> +# BeginScope
> +#
> +BeginScope _IP6CONFIG_REGISTERDATANOTIFY_FUNC1_CASE1
> +
> +#
> +# Parameter Definition
> +# R_ represents "Remote EFI Side Parameter"
> +# L_ represents "Local ENTS Side Parameter"
> +#
> +UINTN R_Status
> +UINTN R_Context
> +UINTN R_DoneEvent
> +UINTN R_Context1
> +UINTN R_DoneEvent1
> +UINTN R_Context2
> +UINTN R_DoneEvent2
> +UINTN R_Ip6ConfigDataSize
> +UINT32 R_Ip6ConfigDataType
> +EFI_IP6_CONFIG_INTERFACE_INFO R_Ip6ConfigInterfaceInfo
> +EFI_IP6_CONFIG_INTERFACE_ID R_Ip6ConfigInterfaceId
> +UINT32 R_Ip6ConfigPolicy
> +EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS
> R_Ip6ConfigDadTransmits
> +
> +#
> +# Check Point: Call Ip6Config->SetData to set manual policy
> +#
> +SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> +SetVar R_Ip6ConfigDataSize [Sizeof UINT32]
> +SetVar R_Ip6ConfigPolicy $IP6CP(Manual)
> +
> +SetVar R_Context 0
> +BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1,
> &@R_Context,\
> + &@R_DoneEvent, &@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "BS.CreateEvent." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +Ip6Config->RegisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.RegisterDataNotify - Register notification event for
> configuration." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +Ip6Config->SetData
> "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_S
> tatus"
> +GetAck
> +GetVar R_Status
> +if { $R_Status == $EFI_SUCCESS } {
> + set assert pass
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.SetData - Call SetData to set manual policy." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +} elseif { $R_Status == $EFI_NOT_READY } {
> + set i 0
> + set L_TimeOut 30
> + while { 1 > 0 } {
> + GetVar R_Context
> + if { $R_Context == 1 } {
> + break
> + } elseif { $i == $L_TimeOut } {
> + set assert fail
> + RecordAssertion $assert $GenericAssertionGuid \
> + "SetData failed.(event hasn't been signaled before TIMEOUT)." \
> + "TIMEOUT value is $L_TimeOut (sec), "
> + SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> + Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_REGISTERDATANOTIFY_FUNC1_CASE1
> + EndLog
> + return
> + }
> + incr i
> + Stall 1
> + }
> +} else {
> + set assert fail
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.SetData - Call SetData to set manual policy." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> + SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> + Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_REGISTERDATANOTIFY_FUNC1_CASE1
> + EndLog
> + return
> +}
> +
> +Ip6Config->GetData
> "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_
> Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.GetData - Call GetData to get policy value." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +GetVar R_Ip6ConfigPolicy
> +if { $R_Ip6ConfigPolicy == $IP6CP(Manual) } {
> + set assert pass
> +} else {
> + set assert fail
> +
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Set manual policy succeeds(event is signaled correctly and data
> correct)."
> + SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> + Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_REGISTERDATANOTIFY_FUNC1_CASE1
> + EndLog
> + return
> +}
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Set manual policy succeeds(event is signaled correctly and data
> correct)."
> +
> +#
> +# Check Point: Call Ip6Config->SetData to set DadXmits 0
> +#
> +SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> +SetVar R_Ip6ConfigDataSize [Sizeof
> EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS]
> +SetVar R_Ip6ConfigDadTransmits.DupAddrDetectTransmits 0
> +
> +SetVar R_Context1 0
> +BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1,
> &@R_Context1,\
> + &@R_DoneEvent1, &@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "BS.CreateEvent." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +Ip6Config->RegisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.RegisterDataNotify - Register notification event for
> configuration." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +Ip6Config->SetData
> "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigDadTransmits,
> &@R_Status"
> +GetAck
> +GetVar R_Status
> +if { $R_Status == $EFI_SUCCESS } {
> + set assert pass
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.SetData - Call SetData to set DadXmits 0." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +} elseif { $R_Status == $EFI_NOT_READY } {
> + set i 0
> + set L_TimeOut 30
> + while { 1 > 0 } {
> + GetVar R_Context1
> + if { $R_Context1 == 1 } {
> + break
> + } elseif { $i == $L_TimeOut } {
> + set assert fail
> + RecordAssertion $assert $GenericAssertionGuid \
> + "SetData failed.(event hasn't been signaled before TIMEOUT)." \
> + "TIMEOUT value is $L_TimeOut (sec), "
> + SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> + Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> + Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_REGISTERDATANOTIFY_FUNC1_CASE1
> + EndLog
> + return
> + }
> + incr i
> + Stall 1
> + }
> +} else {
> + set assert fail
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.SetData - Call SetData to set DadXmits 0." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> + SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> + Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> + Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_REGISTERDATANOTIFY_FUNC1_CASE1
> + EndLog
> + return
> +}
> +
> +Ip6Config->GetData
> "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigDadTransmit
> s,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.GetData - Call GetData to get DadXmits value." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +GetVar R_Ip6ConfigDadTransmits.DupAddrDetectTransmits
> +if { ${R_Ip6ConfigDadTransmits.DupAddrDetectTransmits} == 0 } {
> + set assert pass
> +} else {
> + set assert fail
> +
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Set DadXmits succeeds(event is signaled correctly and data
> correct)."
> + SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> + Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> + Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_REGISTERDATANOTIFY_FUNC1_CASE1
> + EndLog
> + return
> +}
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Set DadXmits succeeds(event is signaled correctly and data correct)."
> +
> +#
> +# Check Point : Set Manual Address with valid parameter
> +#
> +EFI_IP6_CONFIG_MANUAL_ADDRESS R_Temp_Ip6ConfigManualAddress
> +
> +set L_ManualListLen 1
> +EFI_IP6_CONFIG_MANUAL_ADDRESS R_Ip6ConfigManualAddress
> +set L_UnitLen [Sizeof EFI_IP6_CONFIG_MANUAL_ADDRESS]
> +set L_ListLen [expr {$L_UnitLen * $L_ManualListLen}]
> +SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
> +SetVar R_Ip6ConfigDataSize $L_ListLen
> +SetVar R_Temp_Ip6ConfigManualAddress.IsAnycast FALSE
> +SetVar R_Temp_Ip6ConfigManualAddress.PrefixLength 64
> +SetIpv6Address R_Temp_Ip6ConfigManualAddress.Address "2002::5000"
> +SetVar R_Ip6ConfigManualAddress @R_Temp_Ip6ConfigManualAddress
> +#
> +# Register Event for Manual Address
> +#
> +SetVar R_Context2 0
> +BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1,
> &@R_Context2,\
> + &@R_DoneEvent2, &@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "BS.CreateEvent." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +Ip6Config->RegisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent2,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $Ip6ConfigRegisterDataNotifyFunc1AssertionGuid001
> \
> + "Ip6Config.RegisterDataNotify - Register notification event for
> configuration." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +Ip6Config->SetData
> "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigManualAddres
> s,&@R_Status"
> +GetAck
> +GetVar R_Status
> +if { $R_Status == $EFI_SUCCESS } {
> + set assert pass
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.SetData - Call SetData to set manual address." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +} elseif { $R_Status == $EFI_NOT_READY } {
> + set i 0
> + set L_TimeOut 30
> + while { 1 > 0 } {
> + GetVar R_Context2
> + if { $R_Context2 == 1 } {
> + break
> + } elseif { $i == $L_TimeOut } {
> + set assert fail
> + RecordAssertion $assert $GenericAssertionGuid \
> + "SetData failed.(event hasn't been signaled before TIMEOUT)." \
> + "TIMEOUT value is $L_TimeOut (sec), "
> + SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> + Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> + Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> + GetAck
> + SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
> + Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent2,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent2,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_REGISTERDATANOTIFY_FUNC1_CASE1
> + EndLog
> + return
> + }
> + incr i
> + Stall 1
> + }
> +} else {
> + set assert fail
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.SetData - Call SetData to set manual address." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> + SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> + Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> + Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> + GetAck
> + SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
> + Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent2,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent2,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_REGISTERDATANOTIFY_FUNC1_CASE1
> + EndLog
> + return
> +}
> +
> +#
> +# Check Events for registered datatype
> +#
> +GetVar R_Context2
> +if { $R_Context2 == 1 } {
> + set assert pass
> +} else {
> + set assert fail
> +}
> +RecordAssertion $assert $Ip6ConfigRegisterDataNotifyFunc1AssertionGuid002
> \
> + "Ip6Config.RegisterDataNotify - Registered event is signaled."
> +
> +#
> +# GetData to verfiy the data setting
> +#
> +Ip6Config->GetData
> "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigManualAddr
> ess,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.GetData - Call GetData to get manual address." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +GetVar R_Ip6ConfigManualAddress.IsAnycast
> +if { ${R_Ip6ConfigManualAddress.IsAnycast} == FALSE } {
> + set assert pass
> +} else {
> + set assert fail
> +}
> +GetVar R_Ip6ConfigManualAddress.PrefixLength
> +if { ${R_Ip6ConfigManualAddress.PrefixLength} == 64 } {
> + set assert pass
> +} else {
> + set assert fail
> +}
> +GetVar R_Ip6ConfigManualAddress.Address
> +set L_ManualAddress "2002:0000:0000:0000:0000:0000:0000:5000"
> +set L_RemoteAddress [ GetIpv6Address {R_Ip6ConfigManualAddress.Address} ]
> +if { [ string compare $L_RemoteAddress $L_ManualAddress ] == 0 } {
> + set assert pass
> +} else {
> + set assert fail
> +}
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Set ManualAddress succeeds(event is signaled correctly and data
> correct)."
> +
> +#
> +# Set automatic policy (this will clean up all address information configured)
> +#
> +SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> +SetVar R_Ip6ConfigDataSize [Sizeof UINT32]
> +SetVar R_Ip6ConfigPolicy $IP6CP(Automatic)
> +
> +SetVar R_Context 0
> +
> +Ip6Config->SetData
> "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_S
> tatus"
> +GetAck
> +GetVar R_Status
> +if { $R_Status == $EFI_SUCCESS } {
> + set assert pass
> +} elseif { $R_Status == $EFI_NOT_READY } {
> + set i 0
> + set L_TimeOut 30
> + set assert pass
> + while { 1 > 0 } {
> + GetVar R_Context
> + if { $R_Context == 1 } {
> + break
> + } elseif { $i == $L_TimeOut } {
> + set assert fail
> +
> + SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> + Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> + Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> + GetAck
> + SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
> + Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent2,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent2,&@R_Status}
> + GetAck
> +
> + EndScope _IP6CONFIG_REGISTERDATANOTIFY_FUNC1_CASE1
> + EndLog
> + return
> + }
> + incr i
> + Stall 1
> + }
> +} else {
> + set assert fail
> +
> + SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> + Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> + Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> + GetAck
> + SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
> + Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent2,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent2,&@R_Status}
> + GetAck
> +
> + EndScope _IP6CONFIG_REGISTERDATANOTIFY_FUNC1_CASE1
> + EndLog
> + return
> +}
> +
> +Ip6Config->GetData
> "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_
> Status"
> +GetAck
> +GetVar R_Ip6ConfigPolicy
> +if { $R_Ip6ConfigPolicy == $IP6CP(Automatic) } {
> + set assert pass
> +} else {
> + set assert fail
> +}
> +
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.SetData - Set automatic policy to clean up the former
> configuration." \
> + "TimeUsed - $i, TimeOut Value- $L_TimeOut"
> +
> +#
> +# Clean up
> +#
> +SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> +Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.UnregisterDataNotify - Unregister notification event for
> configuration." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +BS->CloseEvent {@R_DoneEvent,&@R_Status}
> +GetAck
> +
> +SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> +Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.UnregisterDataNotify - Unregister notification event for
> configuration." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> +GetAck
> +
> +SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
> +Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent2,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.UnregisterDataNotify - Unregister notification event for
> configuration." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +BS->CloseEvent {@R_DoneEvent2,&@R_Status}
> +GetAck
> +
> +EndScope _IP6CONFIG_REGISTERDATANOTIFY_FUNC1_CASE1
> +
> EndLog
> \ No newline at end of file
> diff --git a/uefi-
> sct/EMS/Bin/TestCase/IP6Config/RegisterDataNotify.Func1.Case2.tcl b/uefi-
> sct/EMS/Bin/TestCase/IP6Config/RegisterDataNotify.Func1.Case2.tcl
> index bd52067..6f7e51f 100644
> --- a/uefi-sct/EMS/Bin/TestCase/IP6Config/RegisterDataNotify.Func1.Case2.tcl
> +++ b/uefi-
> sct/EMS/Bin/TestCase/IP6Config/RegisterDataNotify.Func1.Case2.tcl
> @@ -1,266 +1,266 @@
> -#
> -# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
> -# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
> -#
> -# This program and the accompanying materials
> -# are licensed and made available under the terms and conditions of the BSD
> License
> -# which accompanies this distribution. The full text of the license may be
> found at
> -# http://opensource.org/licenses/bsd-license.php
> -#
> -# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS"
> BASIS,
> -# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER
> EXPRESS OR IMPLIED.
> -#
> -
> #################################################################
> ###############
> -CaseLevel FUNCTION
> -CaseAttribute AUTO
> -CaseVerboseLevel DEFAULT
> -set reportfile report.csv
> -
> -#
> -# test case Name, category, description, GUID...
> -#
> -CaseGuid 886AE98A-5D43-47b4-A339-85FB089F21FA
> -CaseName RegisterDataNotify.Func1.Case2
> -CaseCategory IP6Config
> -CaseDescription {RegisterDataNotify must succeed with valid parameters when
> one event registered on two data types.}
> -
> -
> #################################################################
> ###############
> -Include IP6Config/Include/Ip6Config.inc.tcl
> -
> -
> -#
> -# Begin log ...
> -#
> -BeginLog
> -
> -#
> -# BeginScope
> -#
> -BeginScope _IP6CONFIG_REGISTERDATANOTIFY_FUNC1_CASE2
> -
> -#
> -# Parameter Definition
> -# R_ represents "Remote EFI Side Parameter"
> -# L_ represents "Local ENTS Side Parameter"
> -#
> -UINTN R_Status
> -UINTN R_Context
> -UINTN R_DoneEvent
> -UINTN R_Ip6ConfigDataSize
> -UINT32 R_Ip6ConfigDataType
> -EFI_IP6_CONFIG_INTERFACE_INFO R_Ip6ConfigInterfaceInfo
> -EFI_IP6_CONFIG_INTERFACE_ID R_Ip6ConfigInterfaceId
> -UINT32 R_Ip6ConfigPolicy
> -EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS R_Ip6ConfigDadTransmits
> -
> -#
> -# Check Point: Create Event and register it with data type [Policy] and
> [DadXmits]
> -#
> -SetVar R_Context 0
> -BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context,\
> - &@R_DoneEvent, &@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "BS.CreateEvent." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> -SetVar R_Ip6ConfigDataSize [Sizeof UINT32]
> -SetVar R_Ip6ConfigPolicy $IP6CP(Manual)
> -
> -Ip6Config->RegisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $Ip6ConfigRegisterDataNotifyFunc1AssertionGuid003
> \
> - "Ip6Config.RegisterDataNotify - Register notification event for
> configuration." \
> - "ReturnStatus - $R_Status, ExpectedStatus -
> $EFI_SUCCESS"
> -
> -SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> -SetVar R_Ip6ConfigDataSize [Sizeof
> EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS]
> -SetVar R_Ip6ConfigDadTransmits.DupAddrDetectTransmits 3
> -
> -Ip6Config->RegisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $Ip6ConfigRegisterDataNotifyFunc1AssertionGuid004
> \
> - "Ip6Config.RegisterDataNotify - Register notification event for
> configuration." \
> - "ReturnStatus - $R_Status, ExpectedStatus -
> $EFI_SUCCESS"
> -
> -#
> -# Check Point: Call Ip6Cofnig->SetData to set [Policy] and check whether the
> event is signaled.
> -#
> -SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> -SetVar R_Ip6ConfigDataSize [Sizeof UINT32]
> -SetVar R_Ip6ConfigPolicy $IP6CP(Manual)
> -
> -GetVar R_Context
> -set L_Context1 $R_Context
> -set L_Context2 [expr { $L_Context1 + 1 }]
> -
> -Ip6Config->SetData
> "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_S
> tatus"
> -GetAck
> -GetVar R_Status
> -
> -if { $R_Status == $EFI_SUCCESS } {
> - set assert pass
> - RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.SetData - Call SetData to set manual policy." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -} elseif { $R_Status == $EFI_NOT_READY } {
> - set i 0
> - set L_TimeOut 30
> - while { 1 > 0 } {
> - GetVar R_Context
> - if { $R_Context == $L_Context2 } {
> - break
> - } elseif { $i == $L_TimeOut } {
> - set assert fail
> - RecordAssertion $assert $GenericAssertionGuid \
> - "SetData failed.(event hasn't been signaled before TIMEOUT)." \
> - "TIMEOUT value is $L_TimeOut (sec), "
> - SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> - Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - SetVar R_Ip6ConfigDataType
> $IP6CDT(DupAddrDetectTransmits)
> - Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - EndScope _IP6CONFIG_REGISTERDATANOTIFY_FUNC1_CASE2
> - EndLog
> - return
> - }
> - incr i
> - Stall 1
> - }
> -} else {
> - set assert fail
> - RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.SetData - Call SetData to set manual policy." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> - SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> - Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> - Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - EndScope _IP6CONFIG_REGISTERDATANOTIFY_FUNC1_CASE2
> - EndLog
> - return
> -}
> -
> -GetVar R_Context
> -if { $R_Context == $L_Context2 } {
> - set assert pass
> -} else {
> - set assert fail
> -}
> -
> -RecordAssertion $assert $Ip6ConfigRegisterDataNotifyFunc1AssertionGuid005
> \
> - "Ip6Config.RegisterDataNotify - Event is signaled for DataType -
> Policy."
> -
> -#
> -# Check Point: Call Ip6Config->SetData to set [DadXmits] and check whether
> the event is signaled.
> -#
> -SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> -SetVar R_Ip6ConfigDataSize [Sizeof
> EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS]
> -SetVar R_Ip6ConfigDadTransmits.DupAddrDetectTransmits 3
> -
> -GetVar R_Context
> -set L_Context1 $R_Context
> -set L_Context2 [expr { $L_Context1 + 1 }]
> -
> -Ip6Config->SetData
> "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigDadTransmits,
> &@R_Status"
> -GetAck
> -GetVar R_Status
> -
> -if { $R_Status == $EFI_SUCCESS } {
> - set assert pass
> - RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.SetData - Call SetData to set DadXmits." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -} elseif { $R_Status == $EFI_NOT_READY } {
> - set i 0
> - set L_TimeOut 30
> - while { 1 > 0 } {
> - GetVar R_Context
> - if { $R_Context == $L_Context2 } {
> - break
> - } elseif { $i == $L_TimeOut } {
> - set assert fail
> - RecordAssertion $assert $GenericAssertionGuid \
> - "SetData failed.(event hasn't been signaled before TIMEOUT)." \
> - "TIMEOUT value is $L_TimeOut (sec), "
> -
> - SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> - Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - SetVar R_Ip6ConfigDataType
> $IP6CDT(DupAddrDetectTransmits)
> - Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - EndScope _IP6CONFIG_REGISTERDATANOTIFY_FUNC1_CASE2
> - EndLog
> - return
> - }
> - incr i
> - Stall 1
> - }
> -} else {
> - set assert fail
> - RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.SetData - Call SetData to set DadXmits." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> - SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> - Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> - Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - EndScope _IP6CONFIG_REGISTERDATANOTIFY_FUNC1_CASE2
> - EndLog
> - return
> -}
> -
> -GetVar R_Context
> -if { $R_Context == $L_Context2 } {
> - set assert pass
> -} else {
> - set assert fail
> -}
> -RecordAssertion $assert $Ip6ConfigRegisterDataNotifyFunc1AssertionGuid006
> \
> - "Ip6Config.RegisterDataNotify - Event is signaled for DataType -
> DadXmits."
> -
> -#
> -# Clean up
> -#
> -SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> -Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.UnregisterDataNotify - Unregister notification event for
> configuration." \
> - "ReturnStatus - $R_Status, ExpectedStatus -
> $EFI_SUCCESS"
> -
> -SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> -Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.UnregisterDataNotify - Unregister notification event for
> configuration." \
> - "ReturnStatus - $R_Status, ExpectedStatus -
> $EFI_SUCCESS"
> -
> -BS->CloseEvent {@R_DoneEvent,&@R_Status}
> -GetAck
> -
> -EndScope _IP6CONFIG_REGISTERDATANOTIFY_FUNC1_CASE2
> -
> +#
> +# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
> +# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
> +#
> +# This program and the accompanying materials
> +# are licensed and made available under the terms and conditions of the BSD
> License
> +# which accompanies this distribution. The full text of the license may be
> found at
> +# http://opensource.org/licenses/bsd-license.php
> +#
> +# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS"
> BASIS,
> +# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER
> EXPRESS OR IMPLIED.
> +#
> +################################################################
> ################
> +CaseLevel FUNCTION
> +CaseAttribute AUTO
> +CaseVerboseLevel DEFAULT
> +set reportfile report.csv
> +
> +#
> +# test case Name, category, description, GUID...
> +#
> +CaseGuid 886AE98A-5D43-47b4-A339-85FB089F21FA
> +CaseName RegisterDataNotify.Func1.Case2
> +CaseCategory IP6Config
> +CaseDescription {RegisterDataNotify must succeed with valid parameters when
> one event registered on two data types.}
> +
> +################################################################
> ################
> +Include IP6Config/Include/Ip6Config.inc.tcl
> +
> +
> +#
> +# Begin log ...
> +#
> +BeginLog
> +
> +#
> +# BeginScope
> +#
> +BeginScope _IP6CONFIG_REGISTERDATANOTIFY_FUNC1_CASE2
> +
> +#
> +# Parameter Definition
> +# R_ represents "Remote EFI Side Parameter"
> +# L_ represents "Local ENTS Side Parameter"
> +#
> +UINTN R_Status
> +UINTN R_Context
> +UINTN R_DoneEvent
> +UINTN R_Ip6ConfigDataSize
> +UINT32 R_Ip6ConfigDataType
> +EFI_IP6_CONFIG_INTERFACE_INFO R_Ip6ConfigInterfaceInfo
> +EFI_IP6_CONFIG_INTERFACE_ID R_Ip6ConfigInterfaceId
> +UINT32 R_Ip6ConfigPolicy
> +EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS
> R_Ip6ConfigDadTransmits
> +
> +#
> +# Check Point: Create Event and register it with data type [Policy] and
> [DadXmits]
> +#
> +SetVar R_Context 0
> +BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1,
> &@R_Context,\
> + &@R_DoneEvent, &@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "BS.CreateEvent." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> +SetVar R_Ip6ConfigDataSize [Sizeof UINT32]
> +SetVar R_Ip6ConfigPolicy $IP6CP(Manual)
> +
> +Ip6Config->RegisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $Ip6ConfigRegisterDataNotifyFunc1AssertionGuid003
> \
> + "Ip6Config.RegisterDataNotify - Register notification event for
> configuration." \
> + "ReturnStatus - $R_Status, ExpectedStatus -
> $EFI_SUCCESS"
> +
> +SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> +SetVar R_Ip6ConfigDataSize [Sizeof
> EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS]
> +SetVar R_Ip6ConfigDadTransmits.DupAddrDetectTransmits 3
> +
> +Ip6Config->RegisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $Ip6ConfigRegisterDataNotifyFunc1AssertionGuid004
> \
> + "Ip6Config.RegisterDataNotify - Register notification event for
> configuration." \
> + "ReturnStatus - $R_Status, ExpectedStatus -
> $EFI_SUCCESS"
> +
> +#
> +# Check Point: Call Ip6Cofnig->SetData to set [Policy] and check whether the
> event is signaled.
> +#
> +SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> +SetVar R_Ip6ConfigDataSize [Sizeof UINT32]
> +SetVar R_Ip6ConfigPolicy $IP6CP(Manual)
> +
> +GetVar R_Context
> +set L_Context1 $R_Context
> +set L_Context2 [expr { $L_Context1 + 1 }]
> +
> +Ip6Config->SetData
> "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_S
> tatus"
> +GetAck
> +GetVar R_Status
> +
> +if { $R_Status == $EFI_SUCCESS } {
> + set assert pass
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.SetData - Call SetData to set manual policy." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +} elseif { $R_Status == $EFI_NOT_READY } {
> + set i 0
> + set L_TimeOut 30
> + while { 1 > 0 } {
> + GetVar R_Context
> + if { $R_Context == $L_Context2 } {
> + break
> + } elseif { $i == $L_TimeOut } {
> + set assert fail
> + RecordAssertion $assert $GenericAssertionGuid \
> + "SetData failed.(event hasn't been signaled before TIMEOUT)." \
> + "TIMEOUT value is $L_TimeOut (sec), "
> + SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> + Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + SetVar R_Ip6ConfigDataType
> $IP6CDT(DupAddrDetectTransmits)
> + Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_REGISTERDATANOTIFY_FUNC1_CASE2
> + EndLog
> + return
> + }
> + incr i
> + Stall 1
> + }
> +} else {
> + set assert fail
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.SetData - Call SetData to set manual policy." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> + SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> + Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> + Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_REGISTERDATANOTIFY_FUNC1_CASE2
> + EndLog
> + return
> +}
> +
> +GetVar R_Context
> +if { $R_Context == $L_Context2 } {
> + set assert pass
> +} else {
> + set assert fail
> +}
> +
> +RecordAssertion $assert $Ip6ConfigRegisterDataNotifyFunc1AssertionGuid005
> \
> + "Ip6Config.RegisterDataNotify - Event is signaled for DataType -
> Policy."
> +
> +#
> +# Check Point: Call Ip6Config->SetData to set [DadXmits] and check whether
> the event is signaled.
> +#
> +SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> +SetVar R_Ip6ConfigDataSize [Sizeof
> EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS]
> +SetVar R_Ip6ConfigDadTransmits.DupAddrDetectTransmits 3
> +
> +GetVar R_Context
> +set L_Context1 $R_Context
> +set L_Context2 [expr { $L_Context1 + 1 }]
> +
> +Ip6Config->SetData
> "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigDadTransmits,
> &@R_Status"
> +GetAck
> +GetVar R_Status
> +
> +if { $R_Status == $EFI_SUCCESS } {
> + set assert pass
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.SetData - Call SetData to set DadXmits." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +} elseif { $R_Status == $EFI_NOT_READY } {
> + set i 0
> + set L_TimeOut 30
> + while { 1 > 0 } {
> + GetVar R_Context
> + if { $R_Context == $L_Context2 } {
> + break
> + } elseif { $i == $L_TimeOut } {
> + set assert fail
> + RecordAssertion $assert $GenericAssertionGuid \
> + "SetData failed.(event hasn't been signaled before TIMEOUT)." \
> + "TIMEOUT value is $L_TimeOut (sec), "
> +
> + SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> + Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + SetVar R_Ip6ConfigDataType
> $IP6CDT(DupAddrDetectTransmits)
> + Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_REGISTERDATANOTIFY_FUNC1_CASE2
> + EndLog
> + return
> + }
> + incr i
> + Stall 1
> + }
> +} else {
> + set assert fail
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.SetData - Call SetData to set DadXmits." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> + SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> + Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> + Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_REGISTERDATANOTIFY_FUNC1_CASE2
> + EndLog
> + return
> +}
> +
> +GetVar R_Context
> +if { $R_Context == $L_Context2 } {
> + set assert pass
> +} else {
> + set assert fail
> +}
> +RecordAssertion $assert $Ip6ConfigRegisterDataNotifyFunc1AssertionGuid006
> \
> + "Ip6Config.RegisterDataNotify - Event is signaled for DataType -
> DadXmits."
> +
> +#
> +# Clean up
> +#
> +SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> +Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.UnregisterDataNotify - Unregister notification event for
> configuration." \
> + "ReturnStatus - $R_Status, ExpectedStatus -
> $EFI_SUCCESS"
> +
> +SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> +Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.UnregisterDataNotify - Unregister notification event for
> configuration." \
> + "ReturnStatus - $R_Status, ExpectedStatus -
> $EFI_SUCCESS"
> +
> +BS->CloseEvent {@R_DoneEvent,&@R_Status}
> +GetAck
> +
> +EndScope _IP6CONFIG_REGISTERDATANOTIFY_FUNC1_CASE2
> +
> EndLog
> \ No newline at end of file
> diff --git a/uefi-sct/EMS/Bin/TestCase/IP6Config/SetData.Conf1.Case1.tcl
> b/uefi-sct/EMS/Bin/TestCase/IP6Config/SetData.Conf1.Case1.tcl
> index 2213ec9..8c33521 100644
> --- a/uefi-sct/EMS/Bin/TestCase/IP6Config/SetData.Conf1.Case1.tcl
> +++ b/uefi-sct/EMS/Bin/TestCase/IP6Config/SetData.Conf1.Case1.tcl
> @@ -1,72 +1,72 @@
> -#
> -# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
> -# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
> -#
> -# This program and the accompanying materials
> -# are licensed and made available under the terms and conditions of the BSD
> License
> -# which accompanies this distribution. The full text of the license may be
> found at
> -# http://opensource.org/licenses/bsd-license.php
> -#
> -# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS"
> BASIS,
> -# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER
> EXPRESS OR IMPLIED.
> -#
> -
> #################################################################
> ###############
> -CaseLevel CONFORMANCE
> -CaseAttribute AUTO
> -CaseVerboseLevel DEFAULT
> -set reportfile report.csv
> -
> -#
> -# test case Name, category, description, GUID...
> -#
> -CaseGuid EF4CCB73-577C-4b8c-96E3-91517F0B7056
> -CaseName SetData.Conf1.Case1
> -CaseCategory IP6Config
> -CaseDescription {SetData must not succeed when data is NULL.}
> -
> -
> #################################################################
> ###############
> -Include IP6Config/Include/Ip6Config.inc.tcl
> -
> -
> -#
> -# Begin log ...
> -#
> -BeginLog
> -
> -#
> -# BeginScope
> -#
> -BeginScope _IP6CONFIG_SETDATA_CONF1
> -
> -#
> -# Parameter Definition
> -# R_ represents "Remote EFI Side Parameter"
> -# L_ represents "Local ENTS Side Parameter"
> -#
> -UINTN R_Status
> -UINTN R_Context
> -UINTN R_DoneEvent
> -UINTN R_Ip6ConfigDataSize
> -UINT32 R_Ip6ConfigDataType
> -EFI_IP6_CONFIG_INTERFACE_INFO R_Ip6ConfigInterfaceInfo
> -EFI_IP6_CONFIG_INTERFACE_ID R_Ip6ConfigInterfaceId
> -UINT32 R_Ip6ConfigPolicy
> -EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS R_Ip6ConfigDadTransmits
> -EFI_IP6_CONFIG_MANUAL_ADDRESS R_Ip6ConfigManualAddress
> -
> -#
> -# Check Point: Call Ip6Config->SetData with data is NULL.
> -#
> -SetVar R_Ip6ConfigDataType $IP6CDT(InterfaceInfo)
> -SetVar R_Ip6ConfigDataSize [Sizeof EFI_IP6_CONFIG_INTERFACE_INFO]
> -
> -Ip6Config->SetData
> "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,NULL,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_INVALID_PARAMETER]
> -RecordAssertion $assert $Ip6ConfigSetDataConf1AssertionGuid001 \
> - "Ip6Config.SetData - Call SetData with Data NULL." \
> - "ReturnStatus - $R_Status, ExpectedStatus -
> $EFI_INVALID_PARAMETER"
> -
> -EndScope _IP6CONFIG_SETDATA_CONF1
> -
> +#
> +# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
> +# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
> +#
> +# This program and the accompanying materials
> +# are licensed and made available under the terms and conditions of the BSD
> License
> +# which accompanies this distribution. The full text of the license may be
> found at
> +# http://opensource.org/licenses/bsd-license.php
> +#
> +# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS"
> BASIS,
> +# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER
> EXPRESS OR IMPLIED.
> +#
> +################################################################
> ################
> +CaseLevel CONFORMANCE
> +CaseAttribute AUTO
> +CaseVerboseLevel DEFAULT
> +set reportfile report.csv
> +
> +#
> +# test case Name, category, description, GUID...
> +#
> +CaseGuid EF4CCB73-577C-4b8c-96E3-91517F0B7056
> +CaseName SetData.Conf1.Case1
> +CaseCategory IP6Config
> +CaseDescription {SetData must not succeed when data is NULL.}
> +
> +################################################################
> ################
> +Include IP6Config/Include/Ip6Config.inc.tcl
> +
> +
> +#
> +# Begin log ...
> +#
> +BeginLog
> +
> +#
> +# BeginScope
> +#
> +BeginScope _IP6CONFIG_SETDATA_CONF1
> +
> +#
> +# Parameter Definition
> +# R_ represents "Remote EFI Side Parameter"
> +# L_ represents "Local ENTS Side Parameter"
> +#
> +UINTN R_Status
> +UINTN R_Context
> +UINTN R_DoneEvent
> +UINTN R_Ip6ConfigDataSize
> +UINT32 R_Ip6ConfigDataType
> +EFI_IP6_CONFIG_INTERFACE_INFO R_Ip6ConfigInterfaceInfo
> +EFI_IP6_CONFIG_INTERFACE_ID R_Ip6ConfigInterfaceId
> +UINT32 R_Ip6ConfigPolicy
> +EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS
> R_Ip6ConfigDadTransmits
> +EFI_IP6_CONFIG_MANUAL_ADDRESS R_Ip6ConfigManualAddress
> +
> +#
> +# Check Point: Call Ip6Config->SetData with data is NULL.
> +#
> +SetVar R_Ip6ConfigDataType $IP6CDT(InterfaceInfo)
> +SetVar R_Ip6ConfigDataSize [Sizeof EFI_IP6_CONFIG_INTERFACE_INFO]
> +
> +Ip6Config->SetData
> "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,NULL,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_INVALID_PARAMETER]
> +RecordAssertion $assert $Ip6ConfigSetDataConf1AssertionGuid001 \
> + "Ip6Config.SetData - Call SetData with Data NULL." \
> + "ReturnStatus - $R_Status, ExpectedStatus -
> $EFI_INVALID_PARAMETER"
> +
> +EndScope _IP6CONFIG_SETDATA_CONF1
> +
> EndLog
> \ No newline at end of file
> diff --git a/uefi-sct/EMS/Bin/TestCase/IP6Config/SetData.Conf2.Case1.tcl
> b/uefi-sct/EMS/Bin/TestCase/IP6Config/SetData.Conf2.Case1.tcl
> index f14a5bb..bbf7830 100644
> --- a/uefi-sct/EMS/Bin/TestCase/IP6Config/SetData.Conf2.Case1.tcl
> +++ b/uefi-sct/EMS/Bin/TestCase/IP6Config/SetData.Conf2.Case1.tcl
> @@ -1,299 +1,299 @@
> -#
> -# Copyright 2006 - 2017 Unified EFI, Inc.<BR>
> -# Copyright (c) 2010 - 2017, Intel Corporation. All rights reserved.<BR>
> -#
> -# This program and the accompanying materials
> -# are licensed and made available under the terms and conditions of the BSD
> License
> -# which accompanies this distribution. The full text of the license may be
> found at
> -# http://opensource.org/licenses/bsd-license.php
> -#
> -# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS"
> BASIS,
> -# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER
> EXPRESS OR IMPLIED.
> -#
> -
> #################################################################
> ###############
> -CaseLevel CONFORMANCE
> -CaseAttribute AUTO
> -CaseVerboseLevel DEFAULT
> -set reportfile report.csv
> -
> -#
> -# test case Name, category, description, GUID...
> -#
> -CaseGuid A9BBCC37-3ED5-4c11-B6B6-BE52A1131568
> -CaseName SetData.Conf2.Case1
> -CaseCategory IP6Config
> -CaseDescription {SetData must not succeed when one or more fields in data is
> invalid.}
> -
> -
> #################################################################
> ###############
> -Include IP6Config/Include/Ip6Config.inc.tcl
> -
> -
> -#
> -# Begin log ...
> -#
> -BeginLog
> -
> -#
> -# BeginScope
> -#
> -BeginScope _IP6CONFIG_SETDATA_CONF2
> -
> -#
> -# Parameter Definition
> -# R_ represents "Remote EFI Side Parameter"
> -# L_ represents "Local ENTS Side Parameter"
> -#
> -UINTN R_Status
> -UINTN R_Context
> -UINTN R_DoneEvent
> -UINTN R_Ip6ConfigDataSize
> -UINT32 R_Ip6ConfigDataType
> -EFI_IP6_CONFIG_INTERFACE_INFO R_Ip6ConfigInterfaceInfo
> -EFI_IP6_CONFIG_INTERFACE_ID R_Ip6ConfigInterfaceId
> -UINT32 R_Ip6ConfigPolicy
> -EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS R_Ip6ConfigDadTransmits
> -
> -#
> -# Check Point: Call Ip6Config->SetData to set manual policy
> -#
> -SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> -SetVar R_Ip6ConfigDataSize [Sizeof UINT32]
> -SetVar R_Ip6ConfigPolicy $IP6CP(Manual)
> -
> -SetVar R_Context 0
> -BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context,\
> - &@R_DoneEvent, &@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "BS.CreateEvent." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -Ip6Config->RegisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.RegisterDataNotify - Register notification event for
> configuration." \
> - "ReturnStatus - $R_Status, ExpectedStatus -
> $EFI_SUCCESS"
> -
> -Ip6Config->SetData
> "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_S
> tatus"
> -GetAck
> -GetVar R_Status
> -if { $R_Status == $EFI_SUCCESS } {
> - set assert pass
> - RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.SetData - Call SetData to set manual policy." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -} elseif { $R_Status == $EFI_NOT_READY } {
> - set i 0
> - set L_TimeOut 30
> - while { 1 > 0 } {
> - GetVar R_Context
> - if { $R_Context == 1 } {
> - break
> - } elseif { $i == $L_TimeOut } {
> - set assert fail
> - RecordAssertion $assert $GenericAssertionGuid \
> - "SetData failed.(event hasn't been signaled before TIMEOUT)." \
> - "TIMEOUT value is $L_TimeOut (sec), "
> - SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> - Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - EndScope _IP6CONFIG_SETDATA_CONF2
> - EndLog
> - return
> - }
> - incr i
> - Stall 1
> - }
> -} else {
> - set assert fail
> - RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.SetData - Call SetData to set manual policy." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> - SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> - Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - EndScope _IP6CONFIG_SETDATA_CONF2
> - EndLog
> - return
> -}
> -
> -Ip6Config->GetData
> "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_
> Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.GetData - Call GetData to get policy value." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -GetVar R_Ip6ConfigPolicy
> -if { $R_Ip6ConfigPolicy == $IP6CP(Manual) } {
> - set assert pass
> -} else {
> - set assert fail
> -
> - RecordAssertion $assert $GenericAssertionGuid \
> - "Set manual policy succeeds(event is signaled correctly and data
> correct)."
> - SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> - Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - EndScope _IP6CONFIG_SETDATA_CONF2
> - EndLog
> - return
> -}
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Set manual policy succeeds(event is signaled correctly and data
> correct)."
> -
> -#
> -# Check Point : Set Manual Address with "::"
> -#
> -EFI_IP6_CONFIG_MANUAL_ADDRESS R_Temp_Ip6ConfigManualAddress
> -
> -set L_ManualListLen 1
> -EFI_IP6_CONFIG_MANUAL_ADDRESS R_Ip6ConfigManualAddress
> -set L_UnitLen [Sizeof EFI_IP6_CONFIG_MANUAL_ADDRESS]
> -set L_ListLen [expr {$L_UnitLen * $L_ManualListLen}]
> -SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
> -SetVar R_Ip6ConfigDataSize $L_ListLen
> -SetVar R_Temp_Ip6ConfigManualAddress.IsAnycast FALSE
> -SetVar R_Temp_Ip6ConfigManualAddress.PrefixLength 64
> -SetIpv6Address R_Temp_Ip6ConfigManualAddress.Address "::"
> -SetVar R_Ip6ConfigManualAddress @R_Temp_Ip6ConfigManualAddress
> -
> -Ip6Config->SetData
> "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigManualAddres
> s,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_INVALID_PARAMETER]
> -RecordAssertion $assert $Ip6ConfigSetDataConf2AssertionGuid001 \
> - "Ip6Config.SetData - Call SetData to set manual address (Not Unicast
> or Linklocal)." \
> - "ReturnStatus - $R_Status, ExpectedStatus -
> $EFI_INVALID_PARAMETER"
> -
> -DelVar R_Ip6ConfigManualAddress
> -
> -#
> -# Check Point : Set Manual Address with duplication of list entries
> -#
> -set L_ManualListLen 3
> -EFI_IP6_CONFIG_MANUAL_ADDRESS
> R_Ip6ConfigManualAddress($L_ManualListLen)
> -set L_UnitLen [Sizeof EFI_IP6_CONFIG_MANUAL_ADDRESS]
> -set L_ListLen [expr {$L_UnitLen * $L_ManualListLen}]
> -SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
> -SetVar R_Ip6ConfigDataSize $L_ListLen
> -
> -SetVar R_Temp_Ip6ConfigManualAddress.IsAnycast FALSE
> -SetVar R_Temp_Ip6ConfigManualAddress.PrefixLength 64
> -SetIpv6Address R_Temp_Ip6ConfigManualAddress.Address "2002::5000"
> -SetVar R_Ip6ConfigManualAddress(0) @R_Temp_Ip6ConfigManualAddress
> -
> -SetVar R_Temp_Ip6ConfigManualAddress.IsAnycast FALSE
> -SetVar R_Temp_Ip6ConfigManualAddress.PrefixLength 64
> -SetIpv6Address R_Temp_Ip6ConfigManualAddress.Address "2002::5001"
> -SetVar R_Ip6ConfigManualAddress(1) @R_Temp_Ip6ConfigManualAddress
> -
> -SetVar R_Temp_Ip6ConfigManualAddress.IsAnycast FALSE
> -SetVar R_Temp_Ip6ConfigManualAddress.PrefixLength 64
> -SetIpv6Address R_Temp_Ip6ConfigManualAddress.Address "2002::5000"
> -SetVar R_Ip6ConfigManualAddress(2) @R_Temp_Ip6ConfigManualAddress
> -
> -Ip6Config->SetData
> "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigManualAddres
> s,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_INVALID_PARAMETER]
> -RecordAssertion $assert $Ip6ConfigSetDataConf2AssertionGuid002 \
> - "Ip6Config.SetData - Call SetData to set manual address (duplication of
> list entries)." \
> - "ReturnStatus - $R_Status, ExpectedStatus -
> $EFI_INVALID_PARAMETER"
> -
> -DelVar R_Ip6ConfigManualAddress
> -
> -#
> -# Check Points : Set Gateway with "ff02::1" (multicast address)
> -#
> -set L_GatewayListLen 1
> -EFI_IPv6_ADDRESS R_Temp_Ip6ConfigGateway
> -EFI_IPv6_ADDRESS R_Ip6ConfigGateway
> -set L_UnitLen [Sizeof EFI_IPv6_ADDRESS]
> -set L_ListLen [expr {$L_UnitLen * $L_GatewayListLen}]
> -SetVar R_Ip6ConfigDataType $IP6CDT(Gateway)
> -SetVar R_Ip6ConfigDataSize $L_ListLen
> -
> -SetIpv6Address R_Temp_Ip6ConfigGateway "ff02::1"
> -SetVar R_Ip6ConfigGateway @R_Temp_Ip6ConfigGateway
> -Ip6Config->SetData
> "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigGateway,&@R
> _Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_INVALID_PARAMETER]
> -RecordAssertion $assert $Ip6ConfigSetDataConf2AssertionGuid003 \
> - "Ip6Config.SetData - Call SetData to set gateway with multicast
> address." \
> - "ReturnStatus - $R_Status, ExpectedStatus -
> $EFI_INVALID_PARAMETER"
> -
> -DelVar R_Ip6ConfigGateway
> -
> -#
> -# Check Point : Set Gateway with duplication of list entries
> -#
> -set L_GatewayListLen 3
> -EFI_IPv6_ADDRESS R_Ip6ConfigGateway($L_GatewayListLen)
> -set L_UnitLen [Sizeof EFI_IPv6_ADDRESS]
> -set L_ListLen [expr {$L_UnitLen * $L_GatewayListLen}]
> -SetVar R_Ip6ConfigDataType $IP6CDT(Gateway)
> -SetVar R_Ip6ConfigDataSize $L_ListLen
> -
> -SetIpv6Address R_Temp_Ip6ConfigGateway "2002::5000"
> -SetVar R_Ip6ConfigGateway(0) @R_Temp_Ip6ConfigGateway
> -SetIpv6Address R_Temp_Ip6ConfigGateway "2002::5001"
> -SetVar R_Ip6ConfigGateway(1) @R_Temp_Ip6ConfigGateway
> -SetIpv6Address R_Temp_Ip6ConfigGateway "2002::5000"
> -SetVar R_Ip6ConfigGateway(2) @R_Temp_Ip6ConfigGateway
> -
> -Ip6Config->SetData
> "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigGateway,&@R
> _Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_INVALID_PARAMETER]
> -RecordAssertion $assert $Ip6ConfigSetDataConf2AssertionGuid004 \
> - "Ip6Config.SetData - Call SetData to set gateway with duplication of
> list entries." \
> - "ReturnStatus - $R_Status, ExpectedStatus -
> $EFI_INVALID_PARAMETER"
> -
> -DelVar R_Ip6ConfigGateway
> -
> -#
> -# Check Point : Set Dns Server with "ff02::1" (link local address)
> -#
> -set L_DnsServerListLen 1
> -EFI_IPv6_ADDRESS R_Temp_Ip6ConfigDnsServer
> -EFI_IPv6_ADDRESS R_Ip6ConfigDnsServer
> -set L_UnitLen [Sizeof EFI_IPv6_ADDRESS]
> -set L_ListLen [expr {$L_UnitLen * $L_DnsServerListLen}]
> -SetVar R_Ip6ConfigDataType $IP6CDT(DnsServer)
> -SetVar R_Ip6ConfigDataSize $L_ListLen
> -
> -SetIpv6Address R_Temp_Ip6ConfigDnsServer "ff02::1"
> -SetVar R_Ip6ConfigDnsServer @R_Temp_Ip6ConfigDnsServer
> -
> -Ip6Config->SetData
> "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigDnsServer,&@
> R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_INVALID_PARAMETER]
> -RecordAssertion $assert $Ip6ConfigSetDataConf2AssertionGuid005 \
> - "Ip6Config.SetData - Call SetData to set dns server with multicast
> address." \
> - "ReturnStatus - $R_Status, ExpectedStatus -
> $EFI_INVALID_PARAMETER"
> -
> -DelVar R_Ip6ConfigDnsServer
> -
> -#
> -# Clean up
> -#
> -SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> -Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.UnregisterDataNotify - Unregister notification event for
> configuration." \
> - "ReturnStatus - $R_Status, ExpectedStatus -
> $EFI_SUCCESS"
> -
> -BS->CloseEvent {@R_DoneEvent,&@R_Status}
> -GetAck
> -
> -EndScope _IP6CONFIG_SETDATA_CONF2
> -
> +#
> +# Copyright 2006 - 2017 Unified EFI, Inc.<BR>
> +# Copyright (c) 2010 - 2017, Intel Corporation. All rights reserved.<BR>
> +#
> +# This program and the accompanying materials
> +# are licensed and made available under the terms and conditions of the BSD
> License
> +# which accompanies this distribution. The full text of the license may be
> found at
> +# http://opensource.org/licenses/bsd-license.php
> +#
> +# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS"
> BASIS,
> +# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER
> EXPRESS OR IMPLIED.
> +#
> +################################################################
> ################
> +CaseLevel CONFORMANCE
> +CaseAttribute AUTO
> +CaseVerboseLevel DEFAULT
> +set reportfile report.csv
> +
> +#
> +# test case Name, category, description, GUID...
> +#
> +CaseGuid A9BBCC37-3ED5-4c11-B6B6-BE52A1131568
> +CaseName SetData.Conf2.Case1
> +CaseCategory IP6Config
> +CaseDescription {SetData must not succeed when one or more fields in data is
> invalid.}
> +
> +################################################################
> ################
> +Include IP6Config/Include/Ip6Config.inc.tcl
> +
> +
> +#
> +# Begin log ...
> +#
> +BeginLog
> +
> +#
> +# BeginScope
> +#
> +BeginScope _IP6CONFIG_SETDATA_CONF2
> +
> +#
> +# Parameter Definition
> +# R_ represents "Remote EFI Side Parameter"
> +# L_ represents "Local ENTS Side Parameter"
> +#
> +UINTN R_Status
> +UINTN R_Context
> +UINTN R_DoneEvent
> +UINTN R_Ip6ConfigDataSize
> +UINT32 R_Ip6ConfigDataType
> +EFI_IP6_CONFIG_INTERFACE_INFO R_Ip6ConfigInterfaceInfo
> +EFI_IP6_CONFIG_INTERFACE_ID R_Ip6ConfigInterfaceId
> +UINT32 R_Ip6ConfigPolicy
> +EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS
> R_Ip6ConfigDadTransmits
> +
> +#
> +# Check Point: Call Ip6Config->SetData to set manual policy
> +#
> +SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> +SetVar R_Ip6ConfigDataSize [Sizeof UINT32]
> +SetVar R_Ip6ConfigPolicy $IP6CP(Manual)
> +
> +SetVar R_Context 0
> +BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1,
> &@R_Context,\
> + &@R_DoneEvent, &@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "BS.CreateEvent." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +Ip6Config->RegisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.RegisterDataNotify - Register notification event for
> configuration." \
> + "ReturnStatus - $R_Status, ExpectedStatus -
> $EFI_SUCCESS"
> +
> +Ip6Config->SetData
> "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_S
> tatus"
> +GetAck
> +GetVar R_Status
> +if { $R_Status == $EFI_SUCCESS } {
> + set assert pass
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.SetData - Call SetData to set manual policy." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +} elseif { $R_Status == $EFI_NOT_READY } {
> + set i 0
> + set L_TimeOut 30
> + while { 1 > 0 } {
> + GetVar R_Context
> + if { $R_Context == 1 } {
> + break
> + } elseif { $i == $L_TimeOut } {
> + set assert fail
> + RecordAssertion $assert $GenericAssertionGuid \
> + "SetData failed.(event hasn't been signaled before TIMEOUT)." \
> + "TIMEOUT value is $L_TimeOut (sec), "
> + SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> + Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_SETDATA_CONF2
> + EndLog
> + return
> + }
> + incr i
> + Stall 1
> + }
> +} else {
> + set assert fail
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.SetData - Call SetData to set manual policy." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> + SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> + Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_SETDATA_CONF2
> + EndLog
> + return
> +}
> +
> +Ip6Config->GetData
> "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_
> Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.GetData - Call GetData to get policy value." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +GetVar R_Ip6ConfigPolicy
> +if { $R_Ip6ConfigPolicy == $IP6CP(Manual) } {
> + set assert pass
> +} else {
> + set assert fail
> +
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Set manual policy succeeds(event is signaled correctly and data
> correct)."
> + SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> + Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_SETDATA_CONF2
> + EndLog
> + return
> +}
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Set manual policy succeeds(event is signaled correctly and data
> correct)."
> +
> +#
> +# Check Point : Set Manual Address with "::"
> +#
> +EFI_IP6_CONFIG_MANUAL_ADDRESS R_Temp_Ip6ConfigManualAddress
> +
> +set L_ManualListLen 1
> +EFI_IP6_CONFIG_MANUAL_ADDRESS R_Ip6ConfigManualAddress
> +set L_UnitLen [Sizeof EFI_IP6_CONFIG_MANUAL_ADDRESS]
> +set L_ListLen [expr {$L_UnitLen * $L_ManualListLen}]
> +SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
> +SetVar R_Ip6ConfigDataSize $L_ListLen
> +SetVar R_Temp_Ip6ConfigManualAddress.IsAnycast FALSE
> +SetVar R_Temp_Ip6ConfigManualAddress.PrefixLength 64
> +SetIpv6Address R_Temp_Ip6ConfigManualAddress.Address "::"
> +SetVar R_Ip6ConfigManualAddress @R_Temp_Ip6ConfigManualAddress
> +
> +Ip6Config->SetData
> "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigManualAddres
> s,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_INVALID_PARAMETER]
> +RecordAssertion $assert $Ip6ConfigSetDataConf2AssertionGuid001 \
> + "Ip6Config.SetData - Call SetData to set manual address (Not Unicast
> or Linklocal)." \
> + "ReturnStatus - $R_Status, ExpectedStatus -
> $EFI_INVALID_PARAMETER"
> +
> +DelVar R_Ip6ConfigManualAddress
> +
> +#
> +# Check Point : Set Manual Address with duplication of list entries
> +#
> +set L_ManualListLen 3
> +EFI_IP6_CONFIG_MANUAL_ADDRESS
> R_Ip6ConfigManualAddress($L_ManualListLen)
> +set L_UnitLen [Sizeof EFI_IP6_CONFIG_MANUAL_ADDRESS]
> +set L_ListLen [expr {$L_UnitLen * $L_ManualListLen}]
> +SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
> +SetVar R_Ip6ConfigDataSize $L_ListLen
> +
> +SetVar R_Temp_Ip6ConfigManualAddress.IsAnycast FALSE
> +SetVar R_Temp_Ip6ConfigManualAddress.PrefixLength 64
> +SetIpv6Address R_Temp_Ip6ConfigManualAddress.Address "2002::5000"
> +SetVar R_Ip6ConfigManualAddress(0) @R_Temp_Ip6ConfigManualAddress
> +
> +SetVar R_Temp_Ip6ConfigManualAddress.IsAnycast FALSE
> +SetVar R_Temp_Ip6ConfigManualAddress.PrefixLength 64
> +SetIpv6Address R_Temp_Ip6ConfigManualAddress.Address "2002::5001"
> +SetVar R_Ip6ConfigManualAddress(1) @R_Temp_Ip6ConfigManualAddress
> +
> +SetVar R_Temp_Ip6ConfigManualAddress.IsAnycast FALSE
> +SetVar R_Temp_Ip6ConfigManualAddress.PrefixLength 64
> +SetIpv6Address R_Temp_Ip6ConfigManualAddress.Address "2002::5000"
> +SetVar R_Ip6ConfigManualAddress(2) @R_Temp_Ip6ConfigManualAddress
> +
> +Ip6Config->SetData
> "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigManualAddres
> s,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_INVALID_PARAMETER]
> +RecordAssertion $assert $Ip6ConfigSetDataConf2AssertionGuid002 \
> + "Ip6Config.SetData - Call SetData to set manual address (duplication
> of list entries)." \
> + "ReturnStatus - $R_Status, ExpectedStatus -
> $EFI_INVALID_PARAMETER"
> +
> +DelVar R_Ip6ConfigManualAddress
> +
> +#
> +# Check Points : Set Gateway with "ff02::1" (multicast address)
> +#
> +set L_GatewayListLen 1
> +EFI_IPv6_ADDRESS R_Temp_Ip6ConfigGateway
> +EFI_IPv6_ADDRESS R_Ip6ConfigGateway
> +set L_UnitLen [Sizeof EFI_IPv6_ADDRESS]
> +set L_ListLen [expr {$L_UnitLen * $L_GatewayListLen}]
> +SetVar R_Ip6ConfigDataType $IP6CDT(Gateway)
> +SetVar R_Ip6ConfigDataSize $L_ListLen
> +
> +SetIpv6Address R_Temp_Ip6ConfigGateway "ff02::1"
> +SetVar R_Ip6ConfigGateway @R_Temp_Ip6ConfigGateway
> +Ip6Config->SetData
> "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigGateway,&@R
> _Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_INVALID_PARAMETER]
> +RecordAssertion $assert $Ip6ConfigSetDataConf2AssertionGuid003 \
> + "Ip6Config.SetData - Call SetData to set gateway with multicast
> address." \
> + "ReturnStatus - $R_Status, ExpectedStatus -
> $EFI_INVALID_PARAMETER"
> +
> +DelVar R_Ip6ConfigGateway
> +
> +#
> +# Check Point : Set Gateway with duplication of list entries
> +#
> +set L_GatewayListLen 3
> +EFI_IPv6_ADDRESS R_Ip6ConfigGateway($L_GatewayListLen)
> +set L_UnitLen [Sizeof EFI_IPv6_ADDRESS]
> +set L_ListLen [expr {$L_UnitLen * $L_GatewayListLen}]
> +SetVar R_Ip6ConfigDataType $IP6CDT(Gateway)
> +SetVar R_Ip6ConfigDataSize $L_ListLen
> +
> +SetIpv6Address R_Temp_Ip6ConfigGateway "2002::5000"
> +SetVar R_Ip6ConfigGateway(0) @R_Temp_Ip6ConfigGateway
> +SetIpv6Address R_Temp_Ip6ConfigGateway "2002::5001"
> +SetVar R_Ip6ConfigGateway(1) @R_Temp_Ip6ConfigGateway
> +SetIpv6Address R_Temp_Ip6ConfigGateway "2002::5000"
> +SetVar R_Ip6ConfigGateway(2) @R_Temp_Ip6ConfigGateway
> +
> +Ip6Config->SetData
> "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigGateway,&@R
> _Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_INVALID_PARAMETER]
> +RecordAssertion $assert $Ip6ConfigSetDataConf2AssertionGuid004 \
> + "Ip6Config.SetData - Call SetData to set gateway with duplication of
> list entries." \
> + "ReturnStatus - $R_Status, ExpectedStatus -
> $EFI_INVALID_PARAMETER"
> +
> +DelVar R_Ip6ConfigGateway
> +
> +#
> +# Check Point : Set Dns Server with "ff02::1" (link local address)
> +#
> +set L_DnsServerListLen 1
> +EFI_IPv6_ADDRESS R_Temp_Ip6ConfigDnsServer
> +EFI_IPv6_ADDRESS R_Ip6ConfigDnsServer
> +set L_UnitLen [Sizeof EFI_IPv6_ADDRESS]
> +set L_ListLen [expr {$L_UnitLen * $L_DnsServerListLen}]
> +SetVar R_Ip6ConfigDataType $IP6CDT(DnsServer)
> +SetVar R_Ip6ConfigDataSize $L_ListLen
> +
> +SetIpv6Address R_Temp_Ip6ConfigDnsServer "ff02::1"
> +SetVar R_Ip6ConfigDnsServer @R_Temp_Ip6ConfigDnsServer
> +
> +Ip6Config->SetData
> "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigDnsServer,&@
> R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_INVALID_PARAMETER]
> +RecordAssertion $assert $Ip6ConfigSetDataConf2AssertionGuid005 \
> + "Ip6Config.SetData - Call SetData to set dns server with multicast
> address." \
> + "ReturnStatus - $R_Status, ExpectedStatus -
> $EFI_INVALID_PARAMETER"
> +
> +DelVar R_Ip6ConfigDnsServer
> +
> +#
> +# Clean up
> +#
> +SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> +Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.UnregisterDataNotify - Unregister notification event for
> configuration." \
> + "ReturnStatus - $R_Status, ExpectedStatus -
> $EFI_SUCCESS"
> +
> +BS->CloseEvent {@R_DoneEvent,&@R_Status}
> +GetAck
> +
> +EndScope _IP6CONFIG_SETDATA_CONF2
> +
> EndLog
> \ No newline at end of file
> diff --git a/uefi-sct/EMS/Bin/TestCase/IP6Config/SetData.Conf3.Case1.tcl
> b/uefi-sct/EMS/Bin/TestCase/IP6Config/SetData.Conf3.Case1.tcl
> index 84a13c6..1cfc489 100644
> --- a/uefi-sct/EMS/Bin/TestCase/IP6Config/SetData.Conf3.Case1.tcl
> +++ b/uefi-sct/EMS/Bin/TestCase/IP6Config/SetData.Conf3.Case1.tcl
> @@ -1,72 +1,72 @@
> -#
> -# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
> -# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
> -#
> -# This program and the accompanying materials
> -# are licensed and made available under the terms and conditions of the BSD
> License
> -# which accompanies this distribution. The full text of the license may be
> found at
> -# http://opensource.org/licenses/bsd-license.php
> -#
> -# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS"
> BASIS,
> -# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER
> EXPRESS OR IMPLIED.
> -#
> -
> #################################################################
> ###############
> -CaseLevel CONFORMANCE
> -CaseAttribute AUTO
> -CaseVerboseLevel DEFAULT
> -set reportfile report.csv
> -
> -#
> -# test case Name, category, description, GUID...
> -#
> -CaseGuid 2FCE7A2D-09F4-4c8e-97CD-68A0045E34B8
> -CaseName SetData.Conf3.Case1
> -CaseCategory IP6Config
> -CaseDescription {SetData must not succeed when data is read-only type.}
> -
> -
> #################################################################
> ###############
> -Include IP6Config/Include/Ip6Config.inc.tcl
> -
> -
> -#
> -# Begin log ...
> -#
> -BeginLog
> -
> -#
> -# BeginScope
> -#
> -BeginScope _IP6CONFIG_SETDATA_CONF3
> -
> -#
> -# Parameter Definition
> -# R_ represents "Remote EFI Side Parameter"
> -# L_ represents "Local ENTS Side Parameter"
> -#
> -UINTN R_Status
> -UINTN R_Context
> -UINTN R_DoneEvent
> -UINTN R_Ip6ConfigDataSize
> -UINT32 R_Ip6ConfigDataType
> -EFI_IP6_CONFIG_INTERFACE_INFO R_Ip6ConfigInterfaceInfo
> -EFI_IP6_CONFIG_INTERFACE_ID R_Ip6ConfigInterfaceId
> -UINT32 R_Ip6ConfigPolicy
> -EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS R_Ip6ConfigDadTransmits
> -EFI_IP6_CONFIG_MANUAL_ADDRESS R_Ip6ConfigManualAddress
> -
> -#
> -# Check Point: Call Ip6Config->SetData with data is read only.
> -#
> -SetVar R_Ip6ConfigDataType $IP6CDT(InterfaceInfo)
> -SetVar R_Ip6ConfigDataSize [Sizeof EFI_IP6_CONFIG_INTERFACE_INFO]
> -
> -Ip6Config->SetData
> "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigInterfaceInfo,
> &@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_WRITE_PROTECTED]
> -RecordAssertion $assert $Ip6ConfigSetDataConf3AssertionGuid001 \
> - "Ip6Config.SetData - Call SetData with data is read only." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_WRITE_PROTECTED"
> -
> -EndScope _IP6CONFIG_SETDATA_CONF3
> -
> +#
> +# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
> +# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
> +#
> +# This program and the accompanying materials
> +# are licensed and made available under the terms and conditions of the BSD
> License
> +# which accompanies this distribution. The full text of the license may be
> found at
> +# http://opensource.org/licenses/bsd-license.php
> +#
> +# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS"
> BASIS,
> +# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER
> EXPRESS OR IMPLIED.
> +#
> +################################################################
> ################
> +CaseLevel CONFORMANCE
> +CaseAttribute AUTO
> +CaseVerboseLevel DEFAULT
> +set reportfile report.csv
> +
> +#
> +# test case Name, category, description, GUID...
> +#
> +CaseGuid 2FCE7A2D-09F4-4c8e-97CD-68A0045E34B8
> +CaseName SetData.Conf3.Case1
> +CaseCategory IP6Config
> +CaseDescription {SetData must not succeed when data is read-only type.}
> +
> +################################################################
> ################
> +Include IP6Config/Include/Ip6Config.inc.tcl
> +
> +
> +#
> +# Begin log ...
> +#
> +BeginLog
> +
> +#
> +# BeginScope
> +#
> +BeginScope _IP6CONFIG_SETDATA_CONF3
> +
> +#
> +# Parameter Definition
> +# R_ represents "Remote EFI Side Parameter"
> +# L_ represents "Local ENTS Side Parameter"
> +#
> +UINTN R_Status
> +UINTN R_Context
> +UINTN R_DoneEvent
> +UINTN R_Ip6ConfigDataSize
> +UINT32 R_Ip6ConfigDataType
> +EFI_IP6_CONFIG_INTERFACE_INFO R_Ip6ConfigInterfaceInfo
> +EFI_IP6_CONFIG_INTERFACE_ID R_Ip6ConfigInterfaceId
> +UINT32 R_Ip6ConfigPolicy
> +EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS
> R_Ip6ConfigDadTransmits
> +EFI_IP6_CONFIG_MANUAL_ADDRESS R_Ip6ConfigManualAddress
> +
> +#
> +# Check Point: Call Ip6Config->SetData with data is read only.
> +#
> +SetVar R_Ip6ConfigDataType $IP6CDT(InterfaceInfo)
> +SetVar R_Ip6ConfigDataSize [Sizeof EFI_IP6_CONFIG_INTERFACE_INFO]
> +
> +Ip6Config->SetData
> "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigInterfaceInfo,
> &@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_WRITE_PROTECTED]
> +RecordAssertion $assert $Ip6ConfigSetDataConf3AssertionGuid001 \
> + "Ip6Config.SetData - Call SetData with data is read only." \
> + "ReturnStatus - $R_Status, ExpectedStatus -
> $EFI_WRITE_PROTECTED"
> +
> +EndScope _IP6CONFIG_SETDATA_CONF3
> +
> EndLog
> \ No newline at end of file
> diff --git a/uefi-sct/EMS/Bin/TestCase/IP6Config/SetData.Conf4.Case1.tcl
> b/uefi-sct/EMS/Bin/TestCase/IP6Config/SetData.Conf4.Case1.tcl
> index 04235cc..597fdac 100644
> --- a/uefi-sct/EMS/Bin/TestCase/IP6Config/SetData.Conf4.Case1.tcl
> +++ b/uefi-sct/EMS/Bin/TestCase/IP6Config/SetData.Conf4.Case1.tcl
> @@ -1,238 +1,238 @@
> -#
> -# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
> -# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
> -#
> -# This program and the accompanying materials
> -# are licensed and made available under the terms and conditions of the BSD
> License
> -# which accompanies this distribution. The full text of the license may be
> found at
> -# http://opensource.org/licenses/bsd-license.php
> -#
> -# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS"
> BASIS,
> -# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER
> EXPRESS OR IMPLIED.
> -#
> -
> #################################################################
> ###############
> -CaseLevel CONFORMANCE
> -CaseAttribute AUTO
> -CaseVerboseLevel DEFAULT
> -set reportfile report.csv
> -
> -#
> -# test case Name, category, description, GUID...
> -#
> -CaseGuid D0A2D271-0BBF-4092-A61E-96FB23208DE0
> -CaseName SetData.Conf4.Case1
> -CaseCategory IP6Config
> -CaseDescription {SetData must not succeed when data is not configurable in
> current policy.}
> -
> -
> #################################################################
> ###############
> -Include IP6Config/Include/Ip6Config.inc.tcl
> -
> -
> -#
> -# Begin log ...
> -#
> -BeginLog
> -
> -#
> -# BeginScope
> -#
> -BeginScope _IP6CONFIG_SETDATA_CONF4
> -
> -#
> -# Parameter Definition
> -# R_ represents "Remote EFI Side Parameter"
> -# L_ represents "Local ENTS Side Parameter"
> -#
> -UINTN R_Status
> -UINTN R_Context
> -UINTN R_DoneEvent
> -UINTN R_Ip6ConfigDataSize
> -UINT32 R_Ip6ConfigDataType
> -EFI_IP6_CONFIG_INTERFACE_INFO R_Ip6ConfigInterfaceInfo
> -EFI_IP6_CONFIG_INTERFACE_ID R_Ip6ConfigInterfaceId
> -UINT32 R_Ip6ConfigPolicy
> -EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS R_Ip6ConfigDadTransmits
> -
> -#
> -# Check Point: Call Ip6Config->SetData to set manual policy
> -#
> -SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> -SetVar R_Ip6ConfigDataSize [Sizeof UINT32]
> -SetVar R_Ip6ConfigPolicy $IP6CP(Automatic)
> -
> -SetVar R_Context 0
> -BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context,\
> - &@R_DoneEvent, &@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "BS.CreateEvent." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -Ip6Config->RegisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.RegisterDataNotify - Register notification event for
> configuration." \
> - "ReturnStatus - $R_Status, ExpectedStatus -
> $EFI_SUCCESS"
> -
> -Ip6Config->SetData
> "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_S
> tatus"
> -GetAck
> -GetVar R_Status
> -if { $R_Status == $EFI_SUCCESS } {
> - set assert pass
> - RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.SetData - Call SetData to set manual policy." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -} elseif { $R_Status == $EFI_NOT_READY } {
> - set i 0
> - set L_TimeOut 30
> - while { 1 > 0 } {
> - GetVar R_Context
> - if { $R_Context == 1 } {
> - break
> - } elseif { $i == $L_TimeOut } {
> - set assert fail
> - RecordAssertion $assert $GenericAssertionGuid \
> - "SetData failed.(event hasn't been signaled before TIMEOUT)." \
> - "TIMEOUT value is $L_TimeOut (sec), "
> - SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> - Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - EndScope _IP6CONFIG_SETDATA_CONF4
> - EndLog
> - return
> - }
> - incr i
> - Stall 1
> - }
> -} else {
> - set assert fail
> - RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.SetData - Call SetData to set manual policy." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> - SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> - Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - EndScope _IP6CONFIG_SETDATA_CONF4
> - EndLog
> - return
> -}
> -
> -Ip6Config->GetData
> "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_
> Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.GetData - Call GetData to get policy value." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -GetVar R_Ip6ConfigPolicy
> -if { $R_Ip6ConfigPolicy == $IP6CP(Automatic) } {
> - set assert pass
> -} else {
> - set assert fail
> -
> - RecordAssertion $assert $GenericAssertionGuid \
> - "Set automatic policy succeeds(event is signaled correctly and data
> correct)."
> - SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> - Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - EndScope _IP6CONFIG_SETDATA_CONF4
> - EndLog
> - return
> -}
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Set automatic policy succeeds(event is signaled correctly and data
> correct)."
> -
> -#
> -# Check Point : Set Manual Address under automatic policy
> -#
> -EFI_IP6_CONFIG_MANUAL_ADDRESS R_Temp_Ip6ConfigManualAddress
> -
> -set L_ManualListLen 1
> -EFI_IP6_CONFIG_MANUAL_ADDRESS R_Ip6ConfigManualAddress
> -set L_UnitLen [Sizeof EFI_IP6_CONFIG_MANUAL_ADDRESS]
> -set L_ListLen [expr {$L_UnitLen * $L_ManualListLen}]
> -SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
> -SetVar R_Ip6ConfigDataSize $L_ListLen
> -SetVar R_Temp_Ip6ConfigManualAddress.IsAnycast FALSE
> -SetVar R_Temp_Ip6ConfigManualAddress.PrefixLength 64
> -SetIpv6Address R_Temp_Ip6ConfigManualAddress.Address "2002::5000"
> -SetVar R_Ip6ConfigManualAddress @R_Temp_Ip6ConfigManualAddress
> -
> -Ip6Config->SetData
> "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigManualAddres
> s,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_WRITE_PROTECTED]
> -RecordAssertion $assert $Ip6ConfigSetDataConf4AssertionGuid001 \
> - "Ip6Config.SetData - Call SetData to set manual address under
> automatic poilcy." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_WRITE_PROTECTED"
> -
> -DelVar R_Ip6ConfigManualAddress
> -
> -#
> -# Check Points : Set Gateway under automatic policy
> -#
> -set L_GatewayListLen 1
> -EFI_IPv6_ADDRESS R_Temp_Ip6ConfigGateway
> -EFI_IPv6_ADDRESS R_Ip6ConfigGateway
> -set L_UnitLen [Sizeof EFI_IPv6_ADDRESS]
> -set L_ListLen [expr {$L_UnitLen * $L_GatewayListLen}]
> -SetVar R_Ip6ConfigDataType $IP6CDT(Gateway)
> -SetVar R_Ip6ConfigDataSize $L_ListLen
> -
> -SetIpv6Address R_Temp_Ip6ConfigGateway "2002::5001"
> -SetVar R_Ip6ConfigGateway @R_Temp_Ip6ConfigGateway
> -Ip6Config->SetData
> "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigGateway,&@R
> _Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_WRITE_PROTECTED]
> -RecordAssertion $assert $Ip6ConfigSetDataConf4AssertionGuid002 \
> - "Ip6Config.SetData - Call SetData to set gateway under automatic
> policy." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_WRITE_PROTECTED"
> -
> -DelVar R_Ip6ConfigGateway
> -
> -#
> -# Check Point : Set Dns Server under automatic policy
> -#
> -set L_DnsServerListLen 1
> -EFI_IPv6_ADDRESS R_Temp_Ip6ConfigDnsServer
> -EFI_IPv6_ADDRESS R_Ip6ConfigDnsServer
> -set L_UnitLen [Sizeof EFI_IPv6_ADDRESS]
> -set L_ListLen [expr {$L_UnitLen * $L_DnsServerListLen}]
> -SetVar R_Ip6ConfigDataType $IP6CDT(DnsServer)
> -SetVar R_Ip6ConfigDataSize $L_ListLen
> -
> -SetIpv6Address R_Temp_Ip6ConfigDnsServer "2002::5001"
> -SetVar R_Ip6ConfigDnsServer @R_Temp_Ip6ConfigDnsServer
> -
> -Ip6Config->SetData
> "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigDnsServer,&@
> R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_WRITE_PROTECTED]
> -RecordAssertion $assert $Ip6ConfigSetDataConf4AssertionGuid003 \
> - "Ip6Config.SetData - Call SetData to set dns server under automatic
> policy." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_WRITE_PROTECTED"
> -
> -DelVar R_Ip6ConfigDnsServer
> -
> -#
> -# Clean up
> -#
> -SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> -Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.UnregisterDataNotify - Unregister notification event for
> configuration." \
> - "ReturnStatus - $R_Status, ExpectedStatus -
> $EFI_SUCCESS"
> -
> -BS->CloseEvent {@R_DoneEvent,&@R_Status}
> -GetAck
> -
> -EndScope _IP6CONFIG_SETDATA_CONF4
> -
> +#
> +# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
> +# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
> +#
> +# This program and the accompanying materials
> +# are licensed and made available under the terms and conditions of the BSD
> License
> +# which accompanies this distribution. The full text of the license may be
> found at
> +# http://opensource.org/licenses/bsd-license.php
> +#
> +# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS"
> BASIS,
> +# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER
> EXPRESS OR IMPLIED.
> +#
> +################################################################
> ################
> +CaseLevel CONFORMANCE
> +CaseAttribute AUTO
> +CaseVerboseLevel DEFAULT
> +set reportfile report.csv
> +
> +#
> +# test case Name, category, description, GUID...
> +#
> +CaseGuid D0A2D271-0BBF-4092-A61E-96FB23208DE0
> +CaseName SetData.Conf4.Case1
> +CaseCategory IP6Config
> +CaseDescription {SetData must not succeed when data is not configurable in
> current policy.}
> +
> +################################################################
> ################
> +Include IP6Config/Include/Ip6Config.inc.tcl
> +
> +
> +#
> +# Begin log ...
> +#
> +BeginLog
> +
> +#
> +# BeginScope
> +#
> +BeginScope _IP6CONFIG_SETDATA_CONF4
> +
> +#
> +# Parameter Definition
> +# R_ represents "Remote EFI Side Parameter"
> +# L_ represents "Local ENTS Side Parameter"
> +#
> +UINTN R_Status
> +UINTN R_Context
> +UINTN R_DoneEvent
> +UINTN R_Ip6ConfigDataSize
> +UINT32 R_Ip6ConfigDataType
> +EFI_IP6_CONFIG_INTERFACE_INFO R_Ip6ConfigInterfaceInfo
> +EFI_IP6_CONFIG_INTERFACE_ID R_Ip6ConfigInterfaceId
> +UINT32 R_Ip6ConfigPolicy
> +EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS
> R_Ip6ConfigDadTransmits
> +
> +#
> +# Check Point: Call Ip6Config->SetData to set manual policy
> +#
> +SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> +SetVar R_Ip6ConfigDataSize [Sizeof UINT32]
> +SetVar R_Ip6ConfigPolicy $IP6CP(Automatic)
> +
> +SetVar R_Context 0
> +BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1,
> &@R_Context,\
> + &@R_DoneEvent, &@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "BS.CreateEvent." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +Ip6Config->RegisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.RegisterDataNotify - Register notification event for
> configuration." \
> + "ReturnStatus - $R_Status, ExpectedStatus -
> $EFI_SUCCESS"
> +
> +Ip6Config->SetData
> "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_S
> tatus"
> +GetAck
> +GetVar R_Status
> +if { $R_Status == $EFI_SUCCESS } {
> + set assert pass
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.SetData - Call SetData to set manual policy." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +} elseif { $R_Status == $EFI_NOT_READY } {
> + set i 0
> + set L_TimeOut 30
> + while { 1 > 0 } {
> + GetVar R_Context
> + if { $R_Context == 1 } {
> + break
> + } elseif { $i == $L_TimeOut } {
> + set assert fail
> + RecordAssertion $assert $GenericAssertionGuid \
> + "SetData failed.(event hasn't been signaled before TIMEOUT)." \
> + "TIMEOUT value is $L_TimeOut (sec), "
> + SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> + Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_SETDATA_CONF4
> + EndLog
> + return
> + }
> + incr i
> + Stall 1
> + }
> +} else {
> + set assert fail
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.SetData - Call SetData to set manual policy." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> + SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> + Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_SETDATA_CONF4
> + EndLog
> + return
> +}
> +
> +Ip6Config->GetData
> "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_
> Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.GetData - Call GetData to get policy value." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +GetVar R_Ip6ConfigPolicy
> +if { $R_Ip6ConfigPolicy == $IP6CP(Automatic) } {
> + set assert pass
> +} else {
> + set assert fail
> +
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Set automatic policy succeeds(event is signaled correctly and data
> correct)."
> + SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> + Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_SETDATA_CONF4
> + EndLog
> + return
> +}
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Set automatic policy succeeds(event is signaled correctly and data
> correct)."
> +
> +#
> +# Check Point : Set Manual Address under automatic policy
> +#
> +EFI_IP6_CONFIG_MANUAL_ADDRESS R_Temp_Ip6ConfigManualAddress
> +
> +set L_ManualListLen 1
> +EFI_IP6_CONFIG_MANUAL_ADDRESS R_Ip6ConfigManualAddress
> +set L_UnitLen [Sizeof EFI_IP6_CONFIG_MANUAL_ADDRESS]
> +set L_ListLen [expr {$L_UnitLen * $L_ManualListLen}]
> +SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
> +SetVar R_Ip6ConfigDataSize $L_ListLen
> +SetVar R_Temp_Ip6ConfigManualAddress.IsAnycast FALSE
> +SetVar R_Temp_Ip6ConfigManualAddress.PrefixLength 64
> +SetIpv6Address R_Temp_Ip6ConfigManualAddress.Address "2002::5000"
> +SetVar R_Ip6ConfigManualAddress @R_Temp_Ip6ConfigManualAddress
> +
> +Ip6Config->SetData
> "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigManualAddres
> s,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_WRITE_PROTECTED]
> +RecordAssertion $assert $Ip6ConfigSetDataConf4AssertionGuid001 \
> + "Ip6Config.SetData - Call SetData to set manual address under
> automatic poilcy." \
> + "ReturnStatus - $R_Status, ExpectedStatus -
> $EFI_WRITE_PROTECTED"
> +
> +DelVar R_Ip6ConfigManualAddress
> +
> +#
> +# Check Points : Set Gateway under automatic policy
> +#
> +set L_GatewayListLen 1
> +EFI_IPv6_ADDRESS R_Temp_Ip6ConfigGateway
> +EFI_IPv6_ADDRESS R_Ip6ConfigGateway
> +set L_UnitLen [Sizeof EFI_IPv6_ADDRESS]
> +set L_ListLen [expr {$L_UnitLen * $L_GatewayListLen}]
> +SetVar R_Ip6ConfigDataType $IP6CDT(Gateway)
> +SetVar R_Ip6ConfigDataSize $L_ListLen
> +
> +SetIpv6Address R_Temp_Ip6ConfigGateway "2002::5001"
> +SetVar R_Ip6ConfigGateway @R_Temp_Ip6ConfigGateway
> +Ip6Config->SetData
> "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigGateway,&@R
> _Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_WRITE_PROTECTED]
> +RecordAssertion $assert $Ip6ConfigSetDataConf4AssertionGuid002 \
> + "Ip6Config.SetData - Call SetData to set gateway under automatic
> policy." \
> + "ReturnStatus - $R_Status, ExpectedStatus -
> $EFI_WRITE_PROTECTED"
> +
> +DelVar R_Ip6ConfigGateway
> +
> +#
> +# Check Point : Set Dns Server under automatic policy
> +#
> +set L_DnsServerListLen 1
> +EFI_IPv6_ADDRESS R_Temp_Ip6ConfigDnsServer
> +EFI_IPv6_ADDRESS R_Ip6ConfigDnsServer
> +set L_UnitLen [Sizeof EFI_IPv6_ADDRESS]
> +set L_ListLen [expr {$L_UnitLen * $L_DnsServerListLen}]
> +SetVar R_Ip6ConfigDataType $IP6CDT(DnsServer)
> +SetVar R_Ip6ConfigDataSize $L_ListLen
> +
> +SetIpv6Address R_Temp_Ip6ConfigDnsServer "2002::5001"
> +SetVar R_Ip6ConfigDnsServer @R_Temp_Ip6ConfigDnsServer
> +
> +Ip6Config->SetData
> "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigDnsServer,&@
> R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_WRITE_PROTECTED]
> +RecordAssertion $assert $Ip6ConfigSetDataConf4AssertionGuid003 \
> + "Ip6Config.SetData - Call SetData to set dns server under automatic
> policy." \
> + "ReturnStatus - $R_Status, ExpectedStatus -
> $EFI_WRITE_PROTECTED"
> +
> +DelVar R_Ip6ConfigDnsServer
> +
> +#
> +# Clean up
> +#
> +SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> +Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.UnregisterDataNotify - Unregister notification event for
> configuration." \
> + "ReturnStatus - $R_Status, ExpectedStatus -
> $EFI_SUCCESS"
> +
> +BS->CloseEvent {@R_DoneEvent,&@R_Status}
> +GetAck
> +
> +EndScope _IP6CONFIG_SETDATA_CONF4
> +
> EndLog
> \ No newline at end of file
> diff --git a/uefi-sct/EMS/Bin/TestCase/IP6Config/SetData.Conf5.Case1.tcl
> b/uefi-sct/EMS/Bin/TestCase/IP6Config/SetData.Conf5.Case1.tcl
> index 9b7e9c1..5e5a3e1 100644
> --- a/uefi-sct/EMS/Bin/TestCase/IP6Config/SetData.Conf5.Case1.tcl
> +++ b/uefi-sct/EMS/Bin/TestCase/IP6Config/SetData.Conf5.Case1.tcl
> @@ -1,279 +1,279 @@
> -#
> -# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
> -# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
> -#
> -# This program and the accompanying materials
> -# are licensed and made available under the terms and conditions of the BSD
> License
> -# which accompanies this distribution. The full text of the license may be
> found at
> -# http://opensource.org/licenses/bsd-license.php
> -#
> -# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS"
> BASIS,
> -# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER
> EXPRESS OR IMPLIED.
> -#
> -
> #################################################################
> ###############
> -CaseLevel CONFORMANCE
> -CaseAttribute AUTO
> -CaseVerboseLevel DEFAULT
> -set reportfile report.csv
> -
> -#
> -# test case Name, category, description, GUID...
> -#
> -CaseGuid 1F1728C3-BB62-4f28-9D75-6E631F7A6833
> -CaseName SetData.Conf5.Case1
> -CaseCategory IP6Config
> -CaseDescription {SetData must not succeed when data size does not match the
> data type.}
> -
> -
> #################################################################
> ###############
> -Include IP6Config/Include/Ip6Config.inc.tcl
> -
> -
> -#
> -# Begin log ...
> -#
> -BeginLog
> -
> -#
> -# BeginScope
> -#
> -BeginScope _IP6CONFIG_SETDATA_CONF5
> -
> -#
> -# Parameter Definition
> -# R_ represents "Remote EFI Side Parameter"
> -# L_ represents "Local ENTS Side Parameter"
> -#
> -UINTN R_Status
> -UINTN R_Context
> -UINTN R_DoneEvent
> -UINTN R_Ip6ConfigDataSize
> -UINT32 R_Ip6ConfigDataType
> -EFI_IP6_CONFIG_INTERFACE_INFO R_Ip6ConfigInterfaceInfo
> -EFI_IP6_CONFIG_INTERFACE_ID R_Ip6ConfigInterfaceId
> -UINT32 R_Ip6ConfigPolicy
> -EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS R_Ip6ConfigDadTransmits
> -
> -#
> -# Check Point: Call Ip6Config->SetData to set manual policy
> -#
> -SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> -SetVar R_Ip6ConfigDataSize [Sizeof UINT32]
> -SetVar R_Ip6ConfigPolicy $IP6CP(Manual)
> -
> -SetVar R_Context 0
> -BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context,\
> - &@R_DoneEvent, &@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "BS.CreateEvent." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -Ip6Config->RegisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.RegisterDataNotify - Register notification event for
> configuration." \
> - "ReturnStatus - $R_Status, ExpectedStatus -
> $EFI_SUCCESS"
> -
> -Ip6Config->SetData
> "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_S
> tatus"
> -GetAck
> -GetVar R_Status
> -if { $R_Status == $EFI_SUCCESS } {
> - set assert pass
> - RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.SetData - Call SetData to set manual policy." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -} elseif { $R_Status == $EFI_NOT_READY } {
> - set i 0
> - set L_TimeOut 30
> - while { 1 > 0 } {
> - GetVar R_Context
> - if { $R_Context == 1 } {
> - break
> - } elseif { $i == $L_TimeOut } {
> - set assert fail
> - RecordAssertion $assert $GenericAssertionGuid \
> - "SetData failed.(event hasn't been signaled before TIMEOUT)." \
> - "TIMEOUT value is $L_TimeOut (sec), "
> - SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> - Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - EndScope _IP6CONFIG_SETDATA_CONF5
> - EndLog
> - return
> - }
> - incr i
> - Stall 1
> - }
> -} else {
> - set assert fail
> - RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.SetData - Call SetData to set manual policy." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> - SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> - Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - EndScope _IP6CONFIG_SETDATA_CONF5
> - EndLog
> - return
> -}
> -
> -Ip6Config->GetData
> "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_
> Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.GetData - Call GetData to get policy value." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -GetVar R_Ip6ConfigPolicy
> -if { $R_Ip6ConfigPolicy == $IP6CP(Manual) } {
> - set assert pass
> -} else {
> - set assert fail
> -
> - RecordAssertion $assert $GenericAssertionGuid \
> - "Set manual policy succeeds(event is signaled correctly and data
> correct)."
> - SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> - Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - EndScope _IP6CONFIG_SETDATA_CONF5
> - EndLog
> - return
> -}
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Set manual policy succeeds(event is signaled correctly and data
> correct)."
> -
> -#
> -# Check Point : Set Manual Address with wrong data size
> -#
> -EFI_IP6_CONFIG_MANUAL_ADDRESS R_Temp_Ip6ConfigManualAddress
> -
> -set L_ManualListLen 1
> -EFI_IP6_CONFIG_MANUAL_ADDRESS R_Ip6ConfigManualAddress
> -set L_UnitLen [Sizeof EFI_IP6_CONFIG_MANUAL_ADDRESS]
> -set L_ListLen [expr {$L_UnitLen * $L_ManualListLen}]
> -SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
> -SetVar R_Ip6ConfigDataSize 16
> -SetVar R_Temp_Ip6ConfigManualAddress.IsAnycast FALSE
> -SetVar R_Temp_Ip6ConfigManualAddress.PrefixLength 64
> -SetIpv6Address R_Temp_Ip6ConfigManualAddress.Address "2002::5000"
> -SetVar R_Ip6ConfigManualAddress @R_Temp_Ip6ConfigManualAddress
> -
> -Ip6Config->SetData
> "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigManualAddres
> s,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_BAD_BUFFER_SIZE]
> -RecordAssertion $assert $Ip6ConfigSetDataConf5AssertionGuid001 \
> - "Ip6Config.SetData - Call SetData to set manual address with wrong
> data size." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_BAD_BUFFER_SIZE"
> -DelVar R_Ip6ConfigManualAddress
> -
> -#
> -# Check Points : Set Gateway with wrong data size
> -#
> -set L_GatewayListLen 1
> -EFI_IPv6_ADDRESS R_Temp_Ip6ConfigGateway
> -EFI_IPv6_ADDRESS R_Ip6ConfigGateway
> -set L_UnitLen [Sizeof EFI_IPv6_ADDRESS]
> -set L_ListLen [expr {$L_UnitLen * $L_GatewayListLen}]
> -SetVar R_Ip6ConfigDataType $IP6CDT(Gateway)
> -SetVar R_Ip6ConfigDataSize 8
> -
> -SetIpv6Address R_Temp_Ip6ConfigGateway "2002::5001"
> -SetVar R_Ip6ConfigGateway @R_Temp_Ip6ConfigGateway
> -Ip6Config->SetData
> "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigGateway,&@R
> _Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_BAD_BUFFER_SIZE]
> -RecordAssertion $assert $Ip6ConfigSetDataConf5AssertionGuid002 \
> - "Ip6Config.SetData - Call SetData to set gateway with wrong data
> size." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_BAD_BUFFER_SIZE"
> -
> -DelVar R_Ip6ConfigGateway
> -
> -#
> -# Check Point : Set Dns Server with wrong data size
> -#
> -set L_DnsServerListLen 1
> -EFI_IPv6_ADDRESS R_Temp_Ip6ConfigDnsServer
> -EFI_IPv6_ADDRESS R_Ip6ConfigDnsServer
> -set L_UnitLen [Sizeof EFI_IPv6_ADDRESS]
> -set L_ListLen [expr {$L_UnitLen * $L_DnsServerListLen}]
> -SetVar R_Ip6ConfigDataType $IP6CDT(DnsServer)
> -SetVar R_Ip6ConfigDataSize 8
> -
> -SetIpv6Address R_Temp_Ip6ConfigDnsServer "2002::5002"
> -SetVar R_Ip6ConfigDnsServer @R_Temp_Ip6ConfigDnsServer
> -
> -Ip6Config->SetData
> "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigDnsServer,&@
> R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_BAD_BUFFER_SIZE]
> -RecordAssertion $assert $Ip6ConfigSetDataConf5AssertionGuid003 \
> - "Ip6Config.SetData - Call SetData to set dns server with wrong data
> size." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_BAD_BUFFER_SIZE"
> -
> -DelVar R_Ip6ConfigDnsServer
> -
> -#
> -# Check Point : Set Altlfld with wrong data size
> -#
> -SetVar R_Ip6ConfigDataType $IP6CDT(AltInterfaceId)
> -SetVar R_Ip6ConfigDataSize 1
> -
> -Ip6Config->SetData
> "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigInterfaceId,&
> @R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_BAD_BUFFER_SIZE]
> -RecordAssertion $assert $Ip6ConfigSetDataConf5AssertionGuid004 \
> - "Ip6Config.SetData - Call SetData to set Altlfld with wrong data size."
> \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_BAD_BUFFER_SIZE"
> -
> -#
> -# Check Point : Set DadXmits with wrong data size
> -#
> -SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> -SetVar R_Ip6ConfigDataSize 1
> -SetVar R_Ip6ConfigDadTransmits.DupAddrDetectTransmits 3
> -
> -Ip6Config->SetData
> "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigDadTransmits,
> &@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_BAD_BUFFER_SIZE]
> -RecordAssertion $assert $Ip6ConfigSetDataConf5AssertionGuid005 \
> - "Ip6Config.SetData - Call SetData to set DadXmits with wrong data
> size." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_BAD_BUFFER_SIZE"
> -
> -#
> -# Check Point : Set Policy with wrong data size
> -#
> -SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> -SetVar R_Ip6ConfigDataSize 1
> -SetVar R_Ip6ConfigPolicy $IP6CP(Manual)
> -
> -Ip6Config->SetData
> "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_S
> tatus"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_BAD_BUFFER_SIZE]
> -RecordAssertion $assert $Ip6ConfigSetDataConf5AssertionGuid006 \
> - "Ip6Config.SetData - Call SetData to set Policy with wrong data size."
> \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_BAD_BUFFER_SIZE"
> -
> -#
> -# Clean up
> -#
> -SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> -Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.UnregisterDataNotify - Unregister notification event for
> configuration." \
> - "ReturnStatus - $R_Status, ExpectedStatus -
> $EFI_SUCCESS"
> -
> -BS->CloseEvent {@R_DoneEvent,&@R_Status}
> -GetAck
> -
> -EndScope _IP6CONFIG_SETDATA_CONF5
> -
> +#
> +# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
> +# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
> +#
> +# This program and the accompanying materials
> +# are licensed and made available under the terms and conditions of the BSD
> License
> +# which accompanies this distribution. The full text of the license may be
> found at
> +# http://opensource.org/licenses/bsd-license.php
> +#
> +# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS"
> BASIS,
> +# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER
> EXPRESS OR IMPLIED.
> +#
> +################################################################
> ################
> +CaseLevel CONFORMANCE
> +CaseAttribute AUTO
> +CaseVerboseLevel DEFAULT
> +set reportfile report.csv
> +
> +#
> +# test case Name, category, description, GUID...
> +#
> +CaseGuid 1F1728C3-BB62-4f28-9D75-6E631F7A6833
> +CaseName SetData.Conf5.Case1
> +CaseCategory IP6Config
> +CaseDescription {SetData must not succeed when data size does not match the
> data type.}
> +
> +################################################################
> ################
> +Include IP6Config/Include/Ip6Config.inc.tcl
> +
> +
> +#
> +# Begin log ...
> +#
> +BeginLog
> +
> +#
> +# BeginScope
> +#
> +BeginScope _IP6CONFIG_SETDATA_CONF5
> +
> +#
> +# Parameter Definition
> +# R_ represents "Remote EFI Side Parameter"
> +# L_ represents "Local ENTS Side Parameter"
> +#
> +UINTN R_Status
> +UINTN R_Context
> +UINTN R_DoneEvent
> +UINTN R_Ip6ConfigDataSize
> +UINT32 R_Ip6ConfigDataType
> +EFI_IP6_CONFIG_INTERFACE_INFO R_Ip6ConfigInterfaceInfo
> +EFI_IP6_CONFIG_INTERFACE_ID R_Ip6ConfigInterfaceId
> +UINT32 R_Ip6ConfigPolicy
> +EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS
> R_Ip6ConfigDadTransmits
> +
> +#
> +# Check Point: Call Ip6Config->SetData to set manual policy
> +#
> +SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> +SetVar R_Ip6ConfigDataSize [Sizeof UINT32]
> +SetVar R_Ip6ConfigPolicy $IP6CP(Manual)
> +
> +SetVar R_Context 0
> +BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1,
> &@R_Context,\
> + &@R_DoneEvent, &@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "BS.CreateEvent." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +Ip6Config->RegisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.RegisterDataNotify - Register notification event for
> configuration." \
> + "ReturnStatus - $R_Status, ExpectedStatus -
> $EFI_SUCCESS"
> +
> +Ip6Config->SetData
> "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_S
> tatus"
> +GetAck
> +GetVar R_Status
> +if { $R_Status == $EFI_SUCCESS } {
> + set assert pass
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.SetData - Call SetData to set manual policy." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +} elseif { $R_Status == $EFI_NOT_READY } {
> + set i 0
> + set L_TimeOut 30
> + while { 1 > 0 } {
> + GetVar R_Context
> + if { $R_Context == 1 } {
> + break
> + } elseif { $i == $L_TimeOut } {
> + set assert fail
> + RecordAssertion $assert $GenericAssertionGuid \
> + "SetData failed.(event hasn't been signaled before TIMEOUT)." \
> + "TIMEOUT value is $L_TimeOut (sec), "
> + SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> + Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_SETDATA_CONF5
> + EndLog
> + return
> + }
> + incr i
> + Stall 1
> + }
> +} else {
> + set assert fail
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.SetData - Call SetData to set manual policy." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> + SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> + Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_SETDATA_CONF5
> + EndLog
> + return
> +}
> +
> +Ip6Config->GetData
> "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_
> Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.GetData - Call GetData to get policy value." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +GetVar R_Ip6ConfigPolicy
> +if { $R_Ip6ConfigPolicy == $IP6CP(Manual) } {
> + set assert pass
> +} else {
> + set assert fail
> +
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Set manual policy succeeds(event is signaled correctly and data
> correct)."
> + SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> + Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_SETDATA_CONF5
> + EndLog
> + return
> +}
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Set manual policy succeeds(event is signaled correctly and data
> correct)."
> +
> +#
> +# Check Point : Set Manual Address with wrong data size
> +#
> +EFI_IP6_CONFIG_MANUAL_ADDRESS R_Temp_Ip6ConfigManualAddress
> +
> +set L_ManualListLen 1
> +EFI_IP6_CONFIG_MANUAL_ADDRESS R_Ip6ConfigManualAddress
> +set L_UnitLen [Sizeof EFI_IP6_CONFIG_MANUAL_ADDRESS]
> +set L_ListLen [expr {$L_UnitLen * $L_ManualListLen}]
> +SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
> +SetVar R_Ip6ConfigDataSize 16
> +SetVar R_Temp_Ip6ConfigManualAddress.IsAnycast FALSE
> +SetVar R_Temp_Ip6ConfigManualAddress.PrefixLength 64
> +SetIpv6Address R_Temp_Ip6ConfigManualAddress.Address "2002::5000"
> +SetVar R_Ip6ConfigManualAddress @R_Temp_Ip6ConfigManualAddress
> +
> +Ip6Config->SetData
> "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigManualAddres
> s,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_BAD_BUFFER_SIZE]
> +RecordAssertion $assert $Ip6ConfigSetDataConf5AssertionGuid001 \
> + "Ip6Config.SetData - Call SetData to set manual address with wrong
> data size." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_BAD_BUFFER_SIZE"
> +DelVar R_Ip6ConfigManualAddress
> +
> +#
> +# Check Points : Set Gateway with wrong data size
> +#
> +set L_GatewayListLen 1
> +EFI_IPv6_ADDRESS R_Temp_Ip6ConfigGateway
> +EFI_IPv6_ADDRESS R_Ip6ConfigGateway
> +set L_UnitLen [Sizeof EFI_IPv6_ADDRESS]
> +set L_ListLen [expr {$L_UnitLen * $L_GatewayListLen}]
> +SetVar R_Ip6ConfigDataType $IP6CDT(Gateway)
> +SetVar R_Ip6ConfigDataSize 8
> +
> +SetIpv6Address R_Temp_Ip6ConfigGateway "2002::5001"
> +SetVar R_Ip6ConfigGateway @R_Temp_Ip6ConfigGateway
> +Ip6Config->SetData
> "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigGateway,&@R
> _Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_BAD_BUFFER_SIZE]
> +RecordAssertion $assert $Ip6ConfigSetDataConf5AssertionGuid002 \
> + "Ip6Config.SetData - Call SetData to set gateway with wrong data
> size." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_BAD_BUFFER_SIZE"
> +
> +DelVar R_Ip6ConfigGateway
> +
> +#
> +# Check Point : Set Dns Server with wrong data size
> +#
> +set L_DnsServerListLen 1
> +EFI_IPv6_ADDRESS R_Temp_Ip6ConfigDnsServer
> +EFI_IPv6_ADDRESS R_Ip6ConfigDnsServer
> +set L_UnitLen [Sizeof EFI_IPv6_ADDRESS]
> +set L_ListLen [expr {$L_UnitLen * $L_DnsServerListLen}]
> +SetVar R_Ip6ConfigDataType $IP6CDT(DnsServer)
> +SetVar R_Ip6ConfigDataSize 8
> +
> +SetIpv6Address R_Temp_Ip6ConfigDnsServer "2002::5002"
> +SetVar R_Ip6ConfigDnsServer @R_Temp_Ip6ConfigDnsServer
> +
> +Ip6Config->SetData
> "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigDnsServer,&@
> R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_BAD_BUFFER_SIZE]
> +RecordAssertion $assert $Ip6ConfigSetDataConf5AssertionGuid003 \
> + "Ip6Config.SetData - Call SetData to set dns server with wrong data
> size." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_BAD_BUFFER_SIZE"
> +
> +DelVar R_Ip6ConfigDnsServer
> +
> +#
> +# Check Point : Set Altlfld with wrong data size
> +#
> +SetVar R_Ip6ConfigDataType $IP6CDT(AltInterfaceId)
> +SetVar R_Ip6ConfigDataSize 1
> +
> +Ip6Config->SetData
> "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigInterfaceId,&
> @R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_BAD_BUFFER_SIZE]
> +RecordAssertion $assert $Ip6ConfigSetDataConf5AssertionGuid004 \
> + "Ip6Config.SetData - Call SetData to set Altlfld with wrong data size."
> \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_BAD_BUFFER_SIZE"
> +
> +#
> +# Check Point : Set DadXmits with wrong data size
> +#
> +SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> +SetVar R_Ip6ConfigDataSize 1
> +SetVar R_Ip6ConfigDadTransmits.DupAddrDetectTransmits 3
> +
> +Ip6Config->SetData
> "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigDadTransmits,
> &@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_BAD_BUFFER_SIZE]
> +RecordAssertion $assert $Ip6ConfigSetDataConf5AssertionGuid005 \
> + "Ip6Config.SetData - Call SetData to set DadXmits with wrong data
> size." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_BAD_BUFFER_SIZE"
> +
> +#
> +# Check Point : Set Policy with wrong data size
> +#
> +SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> +SetVar R_Ip6ConfigDataSize 1
> +SetVar R_Ip6ConfigPolicy $IP6CP(Manual)
> +
> +Ip6Config->SetData
> "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_S
> tatus"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_BAD_BUFFER_SIZE]
> +RecordAssertion $assert $Ip6ConfigSetDataConf5AssertionGuid006 \
> + "Ip6Config.SetData - Call SetData to set Policy with wrong data size."
> \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_BAD_BUFFER_SIZE"
> +
> +#
> +# Clean up
> +#
> +SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> +Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.UnregisterDataNotify - Unregister notification event for
> configuration." \
> + "ReturnStatus - $R_Status, ExpectedStatus -
> $EFI_SUCCESS"
> +
> +BS->CloseEvent {@R_DoneEvent,&@R_Status}
> +GetAck
> +
> +EndScope _IP6CONFIG_SETDATA_CONF5
> +
> EndLog
> \ No newline at end of file
> diff --git a/uefi-sct/EMS/Bin/TestCase/IP6Config/SetData.Conf6.Case1.tcl
> b/uefi-sct/EMS/Bin/TestCase/IP6Config/SetData.Conf6.Case1.tcl
> index 0430336..0bc8880 100644
> --- a/uefi-sct/EMS/Bin/TestCase/IP6Config/SetData.Conf6.Case1.tcl
> +++ b/uefi-sct/EMS/Bin/TestCase/IP6Config/SetData.Conf6.Case1.tcl
> @@ -1,72 +1,72 @@
> -#
> -# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
> -# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
> -#
> -# This program and the accompanying materials
> -# are licensed and made available under the terms and conditions of the BSD
> License
> -# which accompanies this distribution. The full text of the license may be
> found at
> -# http://opensource.org/licenses/bsd-license.php
> -#
> -# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS"
> BASIS,
> -# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER
> EXPRESS OR IMPLIED.
> -#
> -
> #################################################################
> ###############
> -CaseLevel CONFORMANCE
> -CaseAttribute AUTO
> -CaseVerboseLevel DEFAULT
> -set reportfile report.csv
> -
> -#
> -# test case Name, category, description, GUID...
> -#
> -CaseGuid 6C5FB23E-96A5-475a-8B7E-24B9BBB99C2A
> -CaseName SetData.Conf6.Case1
> -CaseCategory IP6Config
> -CaseDescription {SetData must not succeed when data type is not supported.}
> -
> -
> #################################################################
> ###############
> -Include IP6Config/Include/Ip6Config.inc.tcl
> -
> -
> -#
> -# Begin log ...
> -#
> -BeginLog
> -
> -#
> -# BeginScope
> -#
> -BeginScope _IP6CONFIG_SETDATA_CONF6
> -
> -#
> -# Parameter Definition
> -# R_ represents "Remote EFI Side Parameter"
> -# L_ represents "Local ENTS Side Parameter"
> -#
> -UINTN R_Status
> -UINTN R_Context
> -UINTN R_DoneEvent
> -UINTN R_Ip6ConfigDataSize
> -UINT32 R_Ip6ConfigDataType
> -EFI_IP6_CONFIG_INTERFACE_INFO R_Ip6ConfigInterfaceInfo
> -EFI_IP6_CONFIG_INTERFACE_ID R_Ip6ConfigInterfaceId
> -UINT32 R_Ip6ConfigPolicy
> -EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS R_Ip6ConfigDadTransmits
> -EFI_IP6_CONFIG_MANUAL_ADDRESS R_Ip6ConfigManualAddress
> -UINT32 R_Ip6ConfigMaximum
> -#
> -# Check Point: Call Ip6Config->SetData when data type is not supported.
> -#
> -SetVar R_Ip6ConfigDataType $IP6CDT(Maximum)
> -SetVar R_Ip6ConfigDataSize [Sizeof UINT32]
> -
> -Ip6Config->SetData
> "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigMaximum,&@
> R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_UNSUPPORTED]
> -RecordAssertion $assert $Ip6ConfigSetDataConf6AssertionGuid001 \
> - "Ip6Config.SetData - Call SetData with the data type not supported."
> \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_UNSUPPORTED"
> -
> -EndScope _IP6CONFIG_SETDATA_CONF6
> -
> +#
> +# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
> +# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
> +#
> +# This program and the accompanying materials
> +# are licensed and made available under the terms and conditions of the BSD
> License
> +# which accompanies this distribution. The full text of the license may be
> found at
> +# http://opensource.org/licenses/bsd-license.php
> +#
> +# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS"
> BASIS,
> +# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER
> EXPRESS OR IMPLIED.
> +#
> +################################################################
> ################
> +CaseLevel CONFORMANCE
> +CaseAttribute AUTO
> +CaseVerboseLevel DEFAULT
> +set reportfile report.csv
> +
> +#
> +# test case Name, category, description, GUID...
> +#
> +CaseGuid 6C5FB23E-96A5-475a-8B7E-24B9BBB99C2A
> +CaseName SetData.Conf6.Case1
> +CaseCategory IP6Config
> +CaseDescription {SetData must not succeed when data type is not supported.}
> +
> +################################################################
> ################
> +Include IP6Config/Include/Ip6Config.inc.tcl
> +
> +
> +#
> +# Begin log ...
> +#
> +BeginLog
> +
> +#
> +# BeginScope
> +#
> +BeginScope _IP6CONFIG_SETDATA_CONF6
> +
> +#
> +# Parameter Definition
> +# R_ represents "Remote EFI Side Parameter"
> +# L_ represents "Local ENTS Side Parameter"
> +#
> +UINTN R_Status
> +UINTN R_Context
> +UINTN R_DoneEvent
> +UINTN R_Ip6ConfigDataSize
> +UINT32 R_Ip6ConfigDataType
> +EFI_IP6_CONFIG_INTERFACE_INFO R_Ip6ConfigInterfaceInfo
> +EFI_IP6_CONFIG_INTERFACE_ID R_Ip6ConfigInterfaceId
> +UINT32 R_Ip6ConfigPolicy
> +EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS
> R_Ip6ConfigDadTransmits
> +EFI_IP6_CONFIG_MANUAL_ADDRESS R_Ip6ConfigManualAddress
> +UINT32 R_Ip6ConfigMaximum
> +#
> +# Check Point: Call Ip6Config->SetData when data type is not supported.
> +#
> +SetVar R_Ip6ConfigDataType $IP6CDT(Maximum)
> +SetVar R_Ip6ConfigDataSize [Sizeof UINT32]
> +
> +Ip6Config->SetData
> "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigMaximum,&@
> R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_UNSUPPORTED]
> +RecordAssertion $assert $Ip6ConfigSetDataConf6AssertionGuid001 \
> + "Ip6Config.SetData - Call SetData with the data type not supported."
> \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_UNSUPPORTED"
> +
> +EndScope _IP6CONFIG_SETDATA_CONF6
> +
> EndLog
> \ No newline at end of file
> diff --git a/uefi-sct/EMS/Bin/TestCase/IP6Config/SetData.Conf7.Case1.tcl
> b/uefi-sct/EMS/Bin/TestCase/IP6Config/SetData.Conf7.Case1.tcl
> index 15e118b..22b5676 100644
> --- a/uefi-sct/EMS/Bin/TestCase/IP6Config/SetData.Conf7.Case1.tcl
> +++ b/uefi-sct/EMS/Bin/TestCase/IP6Config/SetData.Conf7.Case1.tcl
> @@ -1,510 +1,510 @@
> -#
> -# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
> -# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
> -#
> -# This program and the accompanying materials
> -# are licensed and made available under the terms and conditions of the BSD
> License
> -# which accompanies this distribution. The full text of the license may be
> found at
> -# http://opensource.org/licenses/bsd-license.php
> -#
> -# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS"
> BASIS,
> -# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER
> EXPRESS OR IMPLIED.
> -#
> -
> #################################################################
> ###############
> -CaseLevel CONFORMANCE
> -CaseAttribute AUTO
> -CaseVerboseLevel DEFAULT
> -set reportfile report.csv
> -
> -#
> -# test case Name, category, description, GUID...
> -#
> -CaseGuid 477D07AC-6FEB-460b-BA92-A98245862D09
> -CaseName SetData.Conf7.Case1
> -CaseCategory IP6Config
> -CaseDescription {SetData must not succeed when the last asynchronous
> process for the data type has not been finished yet.}
> -
> -
> #################################################################
> ###############
> -Include IP6Config/Include/Ip6Config.inc.tcl
> -
> -
> -#
> -# Begin log ...
> -#
> -BeginLog
> -
> -#
> -# BeginScope
> -#
> -BeginScope _IP6CONFIG_SETDATA_CONF7
> -
> -#
> -# Parameter Definition
> -# R_ represents "Remote EFI Side Parameter"
> -# L_ represents "Local ENTS Side Parameter"
> -#
> -UINTN R_Status
> -UINTN R_Context
> -UINTN R_DoneEvent
> -UINTN R_Context1
> -UINTN R_DoneEvent1
> -UINTN R_Ip6ConfigDataSize
> -UINT32 R_Ip6ConfigDataType
> -EFI_IP6_CONFIG_INTERFACE_INFO R_Ip6ConfigInterfaceInfo
> -EFI_IP6_CONFIG_INTERFACE_ID R_Ip6ConfigInterfaceId
> -UINT32 R_Ip6ConfigPolicy
> -EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS R_Ip6ConfigDadTransmits
> -
> -#
> -# Check Point: Call Ip6Config->SetData to set manual policy
> -#
> -SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> -SetVar R_Ip6ConfigDataSize [Sizeof UINT32]
> -SetVar R_Ip6ConfigPolicy $IP6CP(Manual)
> -
> -SetVar R_Context 0
> -BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context,\
> - &@R_DoneEvent, &@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "BS.CreateEvent." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -Ip6Config->RegisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.RegisterDataNotify - Register notification event for
> configuration." \
> - "ReturnStatus - $R_Status, ExpectedStatus -
> $EFI_SUCCESS"
> -
> -Ip6Config->SetData
> "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_S
> tatus"
> -GetAck
> -GetVar R_Status
> -if { $R_Status == $EFI_SUCCESS } {
> - set assert pass
> - RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.SetData - Call SetData to set manual policy." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -} elseif { $R_Status == $EFI_NOT_READY } {
> - set i 0
> - set L_TimeOut 30
> - while { 1 > 0 } {
> - GetVar R_Context
> - if { $R_Context == 1 } {
> - break
> - } elseif { $i == $L_TimeOut } {
> - set assert fail
> - RecordAssertion $assert $GenericAssertionGuid \
> - "SetData failed.(event hasn't been signaled before TIMEOUT)." \
> - "TIMEOUT value is $L_TimeOut (sec), "
> -
> - SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> - Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - EndScope _IP6CONFIG_SETDATA_CONF7
> - EndLog
> - return
> - }
> - incr i
> - Stall 1
> - }
> -} else {
> - set assert fail
> - RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.SetData - Call SetData to set manual policy." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> - SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> - Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - EndScope _IP6CONFIG_SETDATA_CONF7
> - EndLog
> - return
> -}
> -
> -Ip6Config->GetData
> "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_
> Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.GetData - Call GetData to get policy value." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -GetVar R_Ip6ConfigPolicy
> -if { $R_Ip6ConfigPolicy == $IP6CP(Manual) } {
> - set assert pass
> -} else {
> - set assert fail
> -
> - RecordAssertion $assert $GenericAssertionGuid \
> - "Set manual policy succeeds(event is signaled correctly and data
> correct)."
> - SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> - Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - EndScope _IP6CONFIG_SETDATA_CONF7
> - EndLog
> - return
> -}
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Set manual policy succeeds(event is signaled correctly and data
> correct)."
> -
> -#
> -# Check Point: Call Ip6Config->SetData to set DadXmits 20
> -#
> -SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> -SetVar R_Ip6ConfigDataSize [Sizeof
> EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS]
> -SetVar R_Ip6ConfigDadTransmits.DupAddrDetectTransmits 20
> -
> -SetVar R_Context1 0
> -BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1,
> &@R_Context1,\
> - &@R_DoneEvent1, &@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "BS.CreateEvent." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -Ip6Config->RegisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.RegisterDataNotify - Register notification event for
> configuration." \
> - "ReturnStatus - $R_Status, ExpectedStatus -
> $EFI_SUCCESS"
> -
> -Ip6Config->SetData
> "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigDadTransmits,
> &@R_Status"
> -GetAck
> -GetVar R_Status
> -if { $R_Status == $EFI_SUCCESS } {
> - set assert pass
> - RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.SetData - Call SetData to set DadXmits 20." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -} elseif { $R_Status == $EFI_NOT_READY } {
> - set i 0
> - set L_TimeOut 30
> - while { 1 > 0 } {
> - GetVar R_Context1
> - if { $R_Context1 == 1 } {
> - break
> - } elseif { $i == $L_TimeOut } {
> - set assert fail
> - RecordAssertion $assert $GenericAssertionGuid \
> - "SetData failed.(event hasn't been signaled before TIMEOUT)." \
> - "TIMEOUT value is $L_TimeOut (sec), "
> -
> - SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> - Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - SetVar R_Ip6ConfigDataType
> $IP6CDT(DupAddrDetectTransmits)
> - Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> - GetAck
> - EndScope _IP6CONFIG_SETDATA_CONF7
> - EndLog
> - return
> - }
> - incr i
> - Stall 1
> - }
> -} else {
> - set assert fail
> - RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.SetData - Call SetData to set DadXmits 20." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> - SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> - Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> - Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> - GetAck
> - EndScope _IP6CONFIG_SETDATA_CONF7
> - EndLog
> - return
> -}
> -
> -Ip6Config->GetData
> "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigDadTransmit
> s,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.GetData - Call GetData to get DadXmits value." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -GetVar R_Ip6ConfigDadTransmits.DupAddrDetectTransmits
> -if { ${R_Ip6ConfigDadTransmits.DupAddrDetectTransmits} == 20 } {
> - set assert pass
> -} else {
> - set assert fail
> -
> - RecordAssertion $assert $GenericAssertionGuid \
> - "Set DadXmits succeeds(event is signaled correctly and data
> correct)."
> - SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> - Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> - Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> - GetAck
> - EndScope _IP6CONFIG_SETDATA_CONF7
> - EndLog
> - return
> -}
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Set DadXmits succeeds(event is signaled correctly and data
> correct)."
> -
> -#
> -# Check Point : Set Manual Address with valid parameter
> -#
> -EFI_IP6_CONFIG_MANUAL_ADDRESS R_Temp_Ip6ConfigManualAddress
> -
> -set L_ManualListLen 1
> -EFI_IP6_CONFIG_MANUAL_ADDRESS R_Ip6ConfigManualAddress
> -set L_UnitLen [Sizeof EFI_IP6_CONFIG_MANUAL_ADDRESS]
> -set L_ListLen [expr {$L_UnitLen * $L_ManualListLen}]
> -SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
> -SetVar R_Ip6ConfigDataSize $L_ListLen
> -SetVar R_Temp_Ip6ConfigManualAddress.IsAnycast FALSE
> -SetVar R_Temp_Ip6ConfigManualAddress.PrefixLength 64
> -SetIpv6Address R_Temp_Ip6ConfigManualAddress.Address "2002::5000"
> -SetVar R_Ip6ConfigManualAddress @R_Temp_Ip6ConfigManualAddress
> -
> -Ip6Config->SetData
> "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigManualAddres
> s,&@R_Status"
> -GetAck
> -GetVar R_Status
> -if { $R_Status == $EFI_NOT_READY } {
> - set assert pass
> -} else {
> - set assert fail
> -
> - RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.SetData - Call SetData to set manual address with valid
> parameter." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_NOT_READY"
> - SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> - Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> - Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> - GetAck
> - EndScope _IP6CONFIG_SETDATA_CONF7
> - EndLog
> - return
> -}
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.SetData - Call SetData to set manual address with valid
> parameter." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_NOT_READY"
> -
> -DelVar R_Ip6ConfigManualAddress
> -
> -#
> -# Check Point : Set Manual Address with valid parameter before the former
> setting finishes
> -#
> -set L_ManualListLen 1
> -EFI_IP6_CONFIG_MANUAL_ADDRESS R_Ip6ConfigManualAddress
> -set L_UnitLen [Sizeof EFI_IP6_CONFIG_MANUAL_ADDRESS]
> -set L_ListLen [expr {$L_UnitLen * $L_ManualListLen}]
> -SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
> -SetVar R_Ip6ConfigDataSize $L_ListLen
> -SetVar R_Temp_Ip6ConfigManualAddress.IsAnycast FALSE
> -SetVar R_Temp_Ip6ConfigManualAddress.PrefixLength 64
> -SetIpv6Address R_Temp_Ip6ConfigManualAddress.Address "2002::5001"
> -SetVar R_Ip6ConfigManualAddress @R_Temp_Ip6ConfigManualAddress
> -
> -Ip6Config->SetData
> "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigManualAddres
> s,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_ACCESS_DENIED]
> -RecordAssertion $assert $Ip6ConfigSetDataConf7AssertionGuid001 \
> - "Ip6Config.SetData - Call SetData to set manual address with valid
> parameter before the former setting finishes." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_ACCESS_DENIED"
> -
> -
> -#
> -# Make sure the former configurations succeeds
> -# (Eliminate the side-effect to other cases)
> -#
> -set i 0
> -set L_TimeOut 30
> -Ip6Config->GetData
> "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigManualAddr
> ess,&@R_Status"
> -GetAck
> -GetVar R_Status
> -set assert pass
> -while { $R_Status == $EFI_NOT_READY } {
> - Ip6Config->GetData
> "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigManualAddr
> ess,&@R_Status"
> - GetAck
> - GetVar R_Status
> - if { $R_Status == $EFI_SUCCESS } {
> - break
> - } elseif { $i == $L_TimeOut } {
> - set assert fail
> -
> - RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.SetData - former SetData finishes." \
> - "TimeUsed - $i, TimeOut Value- $L_TimeOut"
> - SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> - Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> - Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> - GetAck
> - EndScope _IP6CONFIG_SETDATA_CONF7
> - EndLog
> - return
> - }
> - incr i
> - Stall 1
> -}
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.SetData - former SetData finishes." \
> - "TimeUsed - $i, TimeOut Value- $L_TimeOut"
> -
> -#
> -# Set automatic policy (this will clean up all address information configured)
> -#
> -SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> -SetVar R_Ip6ConfigDataSize [Sizeof UINT32]
> -SetVar R_Ip6ConfigPolicy $IP6CP(Automatic)
> -
> -SetVar R_Context 0
> -
> -Ip6Config->SetData
> "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_S
> tatus"
> -GetAck
> -GetVar R_Status
> -if { $R_Status == $EFI_SUCCESS } {
> - set assert pass
> -} elseif { $R_Status == $EFI_NOT_READY } {
> - set i 0
> - set L_TimeOut 30
> - set assert pass
> - while { 1 > 0 } {
> - GetVar R_Context
> - if { $R_Context == 1 } {
> - break
> - } elseif { $i == $L_TimeOut } {
> - set assert fail
> -
> - RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.SetData - Set automatic policy to clean up the former
> configuration." \
> - "TimeUsed - $i, TimeOut Value- $L_TimeOut"
> - SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> - Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> - Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> - GetAck
> -
> - EndScope _IP6CONFIG_SETDATA_CONF7
> - EndLog
> - return
> - }
> - incr i
> - Stall 1
> - }
> -} else {
> - set assert fail
> -
> - RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.SetData - Set automatic policy to clean up the former
> configuration." \
> - "TimeUsed - $i, TimeOut Value- $L_TimeOut"
> - SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> - Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> - Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> - GetAck
> -
> - EndScope _IP6CONFIG_SETDATA_CONF7
> - EndLog
> - return
> -}
> -
> -Ip6Config->GetData
> "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_
> Status"
> -GetAck
> -GetVar R_Ip6ConfigPolicy
> -if { $R_Ip6ConfigPolicy == $IP6CP(Automatic) } {
> - set assert pass
> -} else {
> - set assert fail
> -
> - RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.SetData - Set automatic policy to clean up the former
> configuration." \
> - "TimeUsed - $i, TimeOut Value- $L_TimeOut"
> - SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> - Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> - Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> - GetAck
> -
> - EndScope _IP6CONFIG_SETDATA_CONF7
> - EndLog
> -
> - return
> -}
> -
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.SetData - Set automatic policy to clean up the former
> configuration." \
> - "TimeUsed - $i, TimeOut Value- $L_TimeOut"
> -
> -
> -#
> -# Clean up
> -#
> -SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> -Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.UnregisterDataNotify - Unregister notification event for
> configuration." \
> - "ReturnStatus - $R_Status, ExpectedStatus -
> $EFI_SUCCESS"
> -
> -BS->CloseEvent {@R_DoneEvent,&@R_Status}
> -GetAck
> -
> -SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> -Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.UnregisterDataNotify - Unregister notification event for
> configuration." \
> - "ReturnStatus - $R_Status, ExpectedStatus -
> $EFI_SUCCESS"
> -
> -BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> -GetAck
> -
> -EndScope _IP6CONFIG_SETDATA_CONF7
> -
> -EndLog
> -
> +#
> +# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
> +# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
> +#
> +# This program and the accompanying materials
> +# are licensed and made available under the terms and conditions of the BSD
> License
> +# which accompanies this distribution. The full text of the license may be
> found at
> +# http://opensource.org/licenses/bsd-license.php
> +#
> +# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS"
> BASIS,
> +# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER
> EXPRESS OR IMPLIED.
> +#
> +################################################################
> ################
> +CaseLevel CONFORMANCE
> +CaseAttribute AUTO
> +CaseVerboseLevel DEFAULT
> +set reportfile report.csv
> +
> +#
> +# test case Name, category, description, GUID...
> +#
> +CaseGuid 477D07AC-6FEB-460b-BA92-A98245862D09
> +CaseName SetData.Conf7.Case1
> +CaseCategory IP6Config
> +CaseDescription {SetData must not succeed when the last asynchronous
> process for the data type has not been finished yet.}
> +
> +################################################################
> ################
> +Include IP6Config/Include/Ip6Config.inc.tcl
> +
> +
> +#
> +# Begin log ...
> +#
> +BeginLog
> +
> +#
> +# BeginScope
> +#
> +BeginScope _IP6CONFIG_SETDATA_CONF7
> +
> +#
> +# Parameter Definition
> +# R_ represents "Remote EFI Side Parameter"
> +# L_ represents "Local ENTS Side Parameter"
> +#
> +UINTN R_Status
> +UINTN R_Context
> +UINTN R_DoneEvent
> +UINTN R_Context1
> +UINTN R_DoneEvent1
> +UINTN R_Ip6ConfigDataSize
> +UINT32 R_Ip6ConfigDataType
> +EFI_IP6_CONFIG_INTERFACE_INFO R_Ip6ConfigInterfaceInfo
> +EFI_IP6_CONFIG_INTERFACE_ID R_Ip6ConfigInterfaceId
> +UINT32 R_Ip6ConfigPolicy
> +EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS
> R_Ip6ConfigDadTransmits
> +
> +#
> +# Check Point: Call Ip6Config->SetData to set manual policy
> +#
> +SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> +SetVar R_Ip6ConfigDataSize [Sizeof UINT32]
> +SetVar R_Ip6ConfigPolicy $IP6CP(Manual)
> +
> +SetVar R_Context 0
> +BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1,
> &@R_Context,\
> + &@R_DoneEvent, &@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "BS.CreateEvent." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +Ip6Config->RegisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.RegisterDataNotify - Register notification event for
> configuration." \
> + "ReturnStatus - $R_Status, ExpectedStatus -
> $EFI_SUCCESS"
> +
> +Ip6Config->SetData
> "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_S
> tatus"
> +GetAck
> +GetVar R_Status
> +if { $R_Status == $EFI_SUCCESS } {
> + set assert pass
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.SetData - Call SetData to set manual policy." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +} elseif { $R_Status == $EFI_NOT_READY } {
> + set i 0
> + set L_TimeOut 30
> + while { 1 > 0 } {
> + GetVar R_Context
> + if { $R_Context == 1 } {
> + break
> + } elseif { $i == $L_TimeOut } {
> + set assert fail
> + RecordAssertion $assert $GenericAssertionGuid \
> + "SetData failed.(event hasn't been signaled before TIMEOUT)." \
> + "TIMEOUT value is $L_TimeOut (sec), "
> +
> + SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> + Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_SETDATA_CONF7
> + EndLog
> + return
> + }
> + incr i
> + Stall 1
> + }
> +} else {
> + set assert fail
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.SetData - Call SetData to set manual policy." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> + SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> + Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_SETDATA_CONF7
> + EndLog
> + return
> +}
> +
> +Ip6Config->GetData
> "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_
> Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.GetData - Call GetData to get policy value." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +GetVar R_Ip6ConfigPolicy
> +if { $R_Ip6ConfigPolicy == $IP6CP(Manual) } {
> + set assert pass
> +} else {
> + set assert fail
> +
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Set manual policy succeeds(event is signaled correctly and data
> correct)."
> + SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> + Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_SETDATA_CONF7
> + EndLog
> + return
> +}
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Set manual policy succeeds(event is signaled correctly and data
> correct)."
> +
> +#
> +# Check Point: Call Ip6Config->SetData to set DadXmits 20
> +#
> +SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> +SetVar R_Ip6ConfigDataSize [Sizeof
> EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS]
> +SetVar R_Ip6ConfigDadTransmits.DupAddrDetectTransmits 20
> +
> +SetVar R_Context1 0
> +BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1,
> &@R_Context1,\
> + &@R_DoneEvent1, &@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "BS.CreateEvent." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +Ip6Config->RegisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.RegisterDataNotify - Register notification event for
> configuration." \
> + "ReturnStatus - $R_Status, ExpectedStatus -
> $EFI_SUCCESS"
> +
> +Ip6Config->SetData
> "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigDadTransmits,
> &@R_Status"
> +GetAck
> +GetVar R_Status
> +if { $R_Status == $EFI_SUCCESS } {
> + set assert pass
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.SetData - Call SetData to set DadXmits 20." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +} elseif { $R_Status == $EFI_NOT_READY } {
> + set i 0
> + set L_TimeOut 30
> + while { 1 > 0 } {
> + GetVar R_Context1
> + if { $R_Context1 == 1 } {
> + break
> + } elseif { $i == $L_TimeOut } {
> + set assert fail
> + RecordAssertion $assert $GenericAssertionGuid \
> + "SetData failed.(event hasn't been signaled before TIMEOUT)." \
> + "TIMEOUT value is $L_TimeOut (sec), "
> +
> + SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> + Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + SetVar R_Ip6ConfigDataType
> $IP6CDT(DupAddrDetectTransmits)
> + Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_SETDATA_CONF7
> + EndLog
> + return
> + }
> + incr i
> + Stall 1
> + }
> +} else {
> + set assert fail
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.SetData - Call SetData to set DadXmits 20." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> + SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> + Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> + Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_SETDATA_CONF7
> + EndLog
> + return
> +}
> +
> +Ip6Config->GetData
> "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigDadTransmit
> s,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.GetData - Call GetData to get DadXmits value." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +GetVar R_Ip6ConfigDadTransmits.DupAddrDetectTransmits
> +if { ${R_Ip6ConfigDadTransmits.DupAddrDetectTransmits} == 20 } {
> + set assert pass
> +} else {
> + set assert fail
> +
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Set DadXmits succeeds(event is signaled correctly and data
> correct)."
> + SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> + Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> + Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_SETDATA_CONF7
> + EndLog
> + return
> +}
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Set DadXmits succeeds(event is signaled correctly and data
> correct)."
> +
> +#
> +# Check Point : Set Manual Address with valid parameter
> +#
> +EFI_IP6_CONFIG_MANUAL_ADDRESS R_Temp_Ip6ConfigManualAddress
> +
> +set L_ManualListLen 1
> +EFI_IP6_CONFIG_MANUAL_ADDRESS R_Ip6ConfigManualAddress
> +set L_UnitLen [Sizeof EFI_IP6_CONFIG_MANUAL_ADDRESS]
> +set L_ListLen [expr {$L_UnitLen * $L_ManualListLen}]
> +SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
> +SetVar R_Ip6ConfigDataSize $L_ListLen
> +SetVar R_Temp_Ip6ConfigManualAddress.IsAnycast FALSE
> +SetVar R_Temp_Ip6ConfigManualAddress.PrefixLength 64
> +SetIpv6Address R_Temp_Ip6ConfigManualAddress.Address "2002::5000"
> +SetVar R_Ip6ConfigManualAddress @R_Temp_Ip6ConfigManualAddress
> +
> +Ip6Config->SetData
> "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigManualAddres
> s,&@R_Status"
> +GetAck
> +GetVar R_Status
> +if { $R_Status == $EFI_NOT_READY } {
> + set assert pass
> +} else {
> + set assert fail
> +
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.SetData - Call SetData to set manual address with valid
> parameter." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_NOT_READY"
> + SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> + Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> + Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_SETDATA_CONF7
> + EndLog
> + return
> +}
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.SetData - Call SetData to set manual address with valid
> parameter." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_NOT_READY"
> +
> +DelVar R_Ip6ConfigManualAddress
> +
> +#
> +# Check Point : Set Manual Address with valid parameter before the former
> setting finishes
> +#
> +set L_ManualListLen 1
> +EFI_IP6_CONFIG_MANUAL_ADDRESS R_Ip6ConfigManualAddress
> +set L_UnitLen [Sizeof EFI_IP6_CONFIG_MANUAL_ADDRESS]
> +set L_ListLen [expr {$L_UnitLen * $L_ManualListLen}]
> +SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
> +SetVar R_Ip6ConfigDataSize $L_ListLen
> +SetVar R_Temp_Ip6ConfigManualAddress.IsAnycast FALSE
> +SetVar R_Temp_Ip6ConfigManualAddress.PrefixLength 64
> +SetIpv6Address R_Temp_Ip6ConfigManualAddress.Address "2002::5001"
> +SetVar R_Ip6ConfigManualAddress @R_Temp_Ip6ConfigManualAddress
> +
> +Ip6Config->SetData
> "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigManualAddres
> s,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_ACCESS_DENIED]
> +RecordAssertion $assert $Ip6ConfigSetDataConf7AssertionGuid001 \
> + "Ip6Config.SetData - Call SetData to set manual address with valid
> parameter before the former setting finishes." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_ACCESS_DENIED"
> +
> +
> +#
> +# Make sure the former configurations succeeds
> +# (Eliminate the side-effect to other cases)
> +#
> +set i 0
> +set L_TimeOut 30
> +Ip6Config->GetData
> "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigManualAddr
> ess,&@R_Status"
> +GetAck
> +GetVar R_Status
> +set assert pass
> +while { $R_Status == $EFI_NOT_READY } {
> + Ip6Config->GetData
> "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigManualAddr
> ess,&@R_Status"
> + GetAck
> + GetVar R_Status
> + if { $R_Status == $EFI_SUCCESS } {
> + break
> + } elseif { $i == $L_TimeOut } {
> + set assert fail
> +
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.SetData - former SetData finishes." \
> + "TimeUsed - $i, TimeOut Value- $L_TimeOut"
> + SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> + Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> + Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_SETDATA_CONF7
> + EndLog
> + return
> + }
> + incr i
> + Stall 1
> +}
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.SetData - former SetData finishes." \
> + "TimeUsed - $i, TimeOut Value- $L_TimeOut"
> +
> +#
> +# Set automatic policy (this will clean up all address information configured)
> +#
> +SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> +SetVar R_Ip6ConfigDataSize [Sizeof UINT32]
> +SetVar R_Ip6ConfigPolicy $IP6CP(Automatic)
> +
> +SetVar R_Context 0
> +
> +Ip6Config->SetData
> "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_S
> tatus"
> +GetAck
> +GetVar R_Status
> +if { $R_Status == $EFI_SUCCESS } {
> + set assert pass
> +} elseif { $R_Status == $EFI_NOT_READY } {
> + set i 0
> + set L_TimeOut 30
> + set assert pass
> + while { 1 > 0 } {
> + GetVar R_Context
> + if { $R_Context == 1 } {
> + break
> + } elseif { $i == $L_TimeOut } {
> + set assert fail
> +
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.SetData - Set automatic policy to clean up the former
> configuration." \
> + "TimeUsed - $i, TimeOut Value- $L_TimeOut"
> + SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> + Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> + Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> + GetAck
> +
> + EndScope _IP6CONFIG_SETDATA_CONF7
> + EndLog
> + return
> + }
> + incr i
> + Stall 1
> + }
> +} else {
> + set assert fail
> +
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.SetData - Set automatic policy to clean up the former
> configuration." \
> + "TimeUsed - $i, TimeOut Value- $L_TimeOut"
> + SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> + Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> + Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> + GetAck
> +
> + EndScope _IP6CONFIG_SETDATA_CONF7
> + EndLog
> + return
> +}
> +
> +Ip6Config->GetData
> "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_
> Status"
> +GetAck
> +GetVar R_Ip6ConfigPolicy
> +if { $R_Ip6ConfigPolicy == $IP6CP(Automatic) } {
> + set assert pass
> +} else {
> + set assert fail
> +
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.SetData - Set automatic policy to clean up the former
> configuration." \
> + "TimeUsed - $i, TimeOut Value- $L_TimeOut"
> + SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> + Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> + Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> + GetAck
> +
> + EndScope _IP6CONFIG_SETDATA_CONF7
> + EndLog
> +
> + return
> +}
> +
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.SetData - Set automatic policy to clean up the former
> configuration." \
> + "TimeUsed - $i, TimeOut Value- $L_TimeOut"
> +
> +
> +#
> +# Clean up
> +#
> +SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> +Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.UnregisterDataNotify - Unregister notification event for
> configuration." \
> + "ReturnStatus - $R_Status, ExpectedStatus -
> $EFI_SUCCESS"
> +
> +BS->CloseEvent {@R_DoneEvent,&@R_Status}
> +GetAck
> +
> +SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> +Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.UnregisterDataNotify - Unregister notification event for
> configuration." \
> + "ReturnStatus - $R_Status, ExpectedStatus -
> $EFI_SUCCESS"
> +
> +BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> +GetAck
> +
> +EndScope _IP6CONFIG_SETDATA_CONF7
> +
> +EndLog
> +
> diff --git a/uefi-sct/EMS/Bin/TestCase/IP6Config/SetData.Func1.Case1.tcl
> b/uefi-sct/EMS/Bin/TestCase/IP6Config/SetData.Func1.Case1.tcl
> index 2053775..d35f104 100644
> --- a/uefi-sct/EMS/Bin/TestCase/IP6Config/SetData.Func1.Case1.tcl
> +++ b/uefi-sct/EMS/Bin/TestCase/IP6Config/SetData.Func1.Case1.tcl
> @@ -1,274 +1,274 @@
> -#
> -# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
> -# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
> -#
> -# This program and the accompanying materials
> -# are licensed and made available under the terms and conditions of the BSD
> License
> -# which accompanies this distribution. The full text of the license may be
> found at
> -# http://opensource.org/licenses/bsd-license.php
> -#
> -# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS"
> BASIS,
> -# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER
> EXPRESS OR IMPLIED.
> -#
> -
> #################################################################
> ###############
> -CaseLevel FUNCTION
> -CaseAttribute AUTO
> -CaseVerboseLevel DEFAULT
> -set reportfile report.csv
> -
> -#
> -# test case Name, category, description, GUID...
> -#
> -CaseGuid EF8FF5B4-8855-4fbd-87C5-C28C7312302A
> -CaseName SetData.Func1.Case1
> -CaseCategory IP6Config
> -CaseDescription {SetData must succeed with valid parameters.}
> -
> -
> #################################################################
> ###############
> -Include IP6Config/Include/Ip6Config.inc.tcl
> -
> -
> -#
> -# Begin log ...
> -#
> -BeginLog
> -
> -#
> -# BeginScope
> -#
> -BeginScope _IP6CONFIG_SETDATA_FUNC1
> -
> -#
> -# Parameter Definition
> -# R_ represents "Remote EFI Side Parameter"
> -# L_ represents "Local ENTS Side Parameter"
> -#
> -UINTN R_Status
> -UINTN R_Context
> -UINTN R_Context1
> -UINTN R_DoneEvent
> -UINTN R_DoneEvent1
> -UINTN R_Ip6ConfigDataSize
> -UINT32 R_Ip6ConfigDataType
> -EFI_IP6_CONFIG_INTERFACE_INFO R_Ip6ConfigInterfaceInfo
> -EFI_IP6_CONFIG_INTERFACE_ID R_Ip6ConfigInterfaceId
> -UINT32 R_Ip6ConfigPolicy
> -EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS R_Ip6ConfigDadTransmits
> -
> -#
> -# Check Point: Call Ip6Config->SetData to set AltInterfaceId
> -#
> -SetVar R_Ip6ConfigDataType $IP6CDT(AltInterfaceId)
> -SetVar R_Ip6ConfigDataSize [Sizeof EFI_IP6_CONFIG_INTERFACE_ID]
> -SetVar R_Ip6ConfigInterfaceId.Id(0) 0
> -SetVar R_Ip6ConfigInterfaceId.Id(1) 1
> -SetVar R_Ip6ConfigInterfaceId.Id(2) 2
> -SetVar R_Ip6ConfigInterfaceId.Id(3) 3
> -SetVar R_Ip6ConfigInterfaceId.Id(4) 4
> -SetVar R_Ip6ConfigInterfaceId.Id(5) 5
> -SetVar R_Ip6ConfigInterfaceId.Id(6) 6
> -SetVar R_Ip6ConfigInterfaceId.Id(7) 7
> -
> -SetVar R_Context 0
> -BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context,\
> - &@R_DoneEvent, &@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "BS.CreateEvent." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -Ip6Config->RegisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.RegisterDataNotify - Register notification event for
> configuration." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -Ip6Config->SetData
> "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigInterfaceId,&
> @R_Status"
> -GetAck
> -GetVar R_Status
> -if { $R_Status == $EFI_SUCCESS } {
> - set assert pass
> - RecordAssertion $assert $Ip6ConfigSetDataFunc1AssertionGuid001 \
> - "Ip6Config.SetData - Call SetData to set AltInterfaceId." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -} elseif { $R_Status == $EFI_NOT_READY } {
> - set i 0
> - set L_TimeOut 30
> - while { 1 > 0 } {
> - GetVar R_Context
> - if { $R_Context == 1 } {
> - break
> - } elseif { $i == $L_TimeOut } {
> - set assert fail
> - RecordAssertion $assert
> $Ip6ConfigSetDataFunc1AssertionGuid001 \
> - "SetData failed.(event hasn't been signaled before TIMEOUT)." \
> - "TIMEOUT value is $L_TimeOut (sec), "
> -
> - SetVar R_Ip6ConfigDataType $IP6CDT(AltInterfaceId)
> - Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - EndScope _IP6CONFIG_SETDATA_FUNC1
> - EndLog
> - return
> - }
> - incr i
> - Stall 1
> - }
> -} else {
> - set assert fail
> - RecordAssertion $assert $Ip6ConfigSetDataFunc1AssertionGuid001 \
> - "Ip6Config.SetData - Call SetData to set AltInterfaceId." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -
> - SetVar R_Ip6ConfigDataType $IP6CDT(AltInterfaceId)
> - Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - EndScope _IP6CONFIG_SETDATA_FUNC1
> - EndLog
> - return
> -}
> -
> -Ip6Config->GetData
> "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigInterfaceId,
> &@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.GetData - Call GetData to get AltInterfaceId value."
> \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -GetVar R_Ip6ConfigInterfaceId
> -if { ${R_Ip6ConfigInterfaceId.Id(0)} == 0 && ${R_Ip6ConfigInterfaceId.Id(1)} ==
> 1 && ${R_Ip6ConfigInterfaceId.Id(2)} == 2 && ${R_Ip6ConfigInterfaceId.Id(3)}
> == 3 && ${R_Ip6ConfigInterfaceId.Id(4)} == 4 && ${R_Ip6ConfigInterfaceId.Id(5)}
> == 5 && ${R_Ip6ConfigInterfaceId.Id(6)} == 6 && ${R_Ip6ConfigInterfaceId.Id(7)}
> == 7} {
> - set assert pass
> -} else {
> - set assert fail
> -}
> -RecordAssertion $assert $Ip6ConfigSetDataFunc1AssertionGuid002 \
> - "Set AltInterfaceId succeeds(event is signaled correctly and data
> correct)."
> -
> -#
> -# Check Point: Call Ip6Config->SetData to set DadXmits
> -#
> -SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> -SetVar R_Ip6ConfigDataSize [Sizeof
> EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS]
> -SetVar R_Ip6ConfigDadTransmits.DupAddrDetectTransmits 3
> -
> -SetVar R_Context1 0
> -BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1,
> &@R_Context1,\
> - &@R_DoneEvent1, &@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "BS.CreateEvent." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -Ip6Config->RegisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.RegisterDataNotify - Register notification event for
> configuration." \
> - "ReturnStatus - $R_Status, ExpectedStatus -
> $EFI_SUCCESS"
> -
> -Ip6Config->SetData
> "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigDadTransmits,
> &@R_Status"
> -GetAck
> -GetVar R_Status
> -if { $R_Status == $EFI_SUCCESS } {
> - set assert pass
> - RecordAssertion $assert $Ip6ConfigSetDataFunc1AssertionGuid003 \
> - "Ip6Config.SetData - Call SetData to set DadXmits." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -} elseif { $R_Status == $EFI_NOT_READY } {
> - set i 0
> - set L_TimeOut 30
> - while { 1 > 0 } {
> - GetVar R_Context1
> - if { $R_Context1 == 1 } {
> - break
> - } elseif { $i == $L_TimeOut } {
> - set assert fail
> - RecordAssertion $assert
> $Ip6ConfigSetDataFunc1AssertionGuid003 \
> - "SetData failed.(event hasn't been signaled before TIMEOUT)." \
> - "TIMEOUT value is $L_TimeOut (sec), "
> -
> - SetVar R_Ip6ConfigDataType $IP6CDT(AltInterfaceId)
> - Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - SetVar R_Ip6ConfigDataType
> $IP6CDT(DupAddrDetectTransmits)
> - Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> - GetAck
> - EndScope _IP6CONFIG_SETDATA_FUNC1
> - EndLog
> - return
> - }
> - incr i
> - Stall 1
> - }
> -} else {
> - set assert fail
> - RecordAssertion $assert $Ip6ConfigSetDataFunc1AssertionGuid003 \
> - "Ip6Config.SetData - Call SetData to set manual DadXmits." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> - SetVar R_Ip6ConfigDataType $IP6CDT(AltInterfaceId)
> - Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> - Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> - GetAck
> - EndScope _IP6CONFIG_SETDATA_FUNC1
> - EndLog
> -}
> -
> -Ip6Config->GetData
> "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigDadTransmit
> s,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.GetData - Call GetData to get DadXmits value." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -GetVar R_Ip6ConfigDadTransmits
> -if { ${R_Ip6ConfigDadTransmits.DupAddrDetectTransmits} == 3 } {
> - set assert pass
> -} else {
> - set assert fail
> -}
> -RecordAssertion $assert $Ip6ConfigSetDataFunc1AssertionGuid004 \
> - "Set DadXmits succeeds(event is signaled correctly and data
> correct)."
> -
> -#
> -# Clean up
> -#
> -SetVar R_Ip6ConfigDataType $IP6CDT(AltInterfaceId)
> -Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.UnregisterDataNotify - Unregister notification event for
> configuration." \
> - "ReturnStatus - $R_Status, ExpectedStatus -
> $EFI_SUCCESS"
> -BS->CloseEvent {@R_DoneEvent,&@R_Status}
> -GetAck
> -
> -SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> -Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.UnregisterDataNotify - Unregister notification event for
> configuration." \
> - "ReturnStatus - $R_Status, ExpectedStatus -
> $EFI_SUCCESS"
> -BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> -GetAck
> -
> -EndScope _IP6CONFIG_SETDATA_FUNC1
> -
> +#
> +# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
> +# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
> +#
> +# This program and the accompanying materials
> +# are licensed and made available under the terms and conditions of the BSD
> License
> +# which accompanies this distribution. The full text of the license may be
> found at
> +# http://opensource.org/licenses/bsd-license.php
> +#
> +# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS"
> BASIS,
> +# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER
> EXPRESS OR IMPLIED.
> +#
> +################################################################
> ################
> +CaseLevel FUNCTION
> +CaseAttribute AUTO
> +CaseVerboseLevel DEFAULT
> +set reportfile report.csv
> +
> +#
> +# test case Name, category, description, GUID...
> +#
> +CaseGuid EF8FF5B4-8855-4fbd-87C5-C28C7312302A
> +CaseName SetData.Func1.Case1
> +CaseCategory IP6Config
> +CaseDescription {SetData must succeed with valid parameters.}
> +
> +################################################################
> ################
> +Include IP6Config/Include/Ip6Config.inc.tcl
> +
> +
> +#
> +# Begin log ...
> +#
> +BeginLog
> +
> +#
> +# BeginScope
> +#
> +BeginScope _IP6CONFIG_SETDATA_FUNC1
> +
> +#
> +# Parameter Definition
> +# R_ represents "Remote EFI Side Parameter"
> +# L_ represents "Local ENTS Side Parameter"
> +#
> +UINTN R_Status
> +UINTN R_Context
> +UINTN R_Context1
> +UINTN R_DoneEvent
> +UINTN R_DoneEvent1
> +UINTN R_Ip6ConfigDataSize
> +UINT32 R_Ip6ConfigDataType
> +EFI_IP6_CONFIG_INTERFACE_INFO R_Ip6ConfigInterfaceInfo
> +EFI_IP6_CONFIG_INTERFACE_ID R_Ip6ConfigInterfaceId
> +UINT32 R_Ip6ConfigPolicy
> +EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS
> R_Ip6ConfigDadTransmits
> +
> +#
> +# Check Point: Call Ip6Config->SetData to set AltInterfaceId
> +#
> +SetVar R_Ip6ConfigDataType $IP6CDT(AltInterfaceId)
> +SetVar R_Ip6ConfigDataSize [Sizeof EFI_IP6_CONFIG_INTERFACE_ID]
> +SetVar R_Ip6ConfigInterfaceId.Id(0) 0
> +SetVar R_Ip6ConfigInterfaceId.Id(1) 1
> +SetVar R_Ip6ConfigInterfaceId.Id(2) 2
> +SetVar R_Ip6ConfigInterfaceId.Id(3) 3
> +SetVar R_Ip6ConfigInterfaceId.Id(4) 4
> +SetVar R_Ip6ConfigInterfaceId.Id(5) 5
> +SetVar R_Ip6ConfigInterfaceId.Id(6) 6
> +SetVar R_Ip6ConfigInterfaceId.Id(7) 7
> +
> +SetVar R_Context 0
> +BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1,
> &@R_Context,\
> + &@R_DoneEvent, &@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "BS.CreateEvent." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +Ip6Config->RegisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.RegisterDataNotify - Register notification event for
> configuration." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +Ip6Config->SetData
> "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigInterfaceId,&
> @R_Status"
> +GetAck
> +GetVar R_Status
> +if { $R_Status == $EFI_SUCCESS } {
> + set assert pass
> + RecordAssertion $assert $Ip6ConfigSetDataFunc1AssertionGuid001
> \
> + "Ip6Config.SetData - Call SetData to set AltInterfaceId." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +} elseif { $R_Status == $EFI_NOT_READY } {
> + set i 0
> + set L_TimeOut 30
> + while { 1 > 0 } {
> + GetVar R_Context
> + if { $R_Context == 1 } {
> + break
> + } elseif { $i == $L_TimeOut } {
> + set assert fail
> + RecordAssertion $assert
> $Ip6ConfigSetDataFunc1AssertionGuid001 \
> + "SetData failed.(event hasn't been signaled before TIMEOUT)." \
> + "TIMEOUT value is $L_TimeOut (sec), "
> +
> + SetVar R_Ip6ConfigDataType $IP6CDT(AltInterfaceId)
> + Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_SETDATA_FUNC1
> + EndLog
> + return
> + }
> + incr i
> + Stall 1
> + }
> +} else {
> + set assert fail
> + RecordAssertion $assert $Ip6ConfigSetDataFunc1AssertionGuid001
> \
> + "Ip6Config.SetData - Call SetData to set AltInterfaceId." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +
> + SetVar R_Ip6ConfigDataType $IP6CDT(AltInterfaceId)
> + Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_SETDATA_FUNC1
> + EndLog
> + return
> +}
> +
> +Ip6Config->GetData
> "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigInterfaceId,
> &@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.GetData - Call GetData to get AltInterfaceId value."
> \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +GetVar R_Ip6ConfigInterfaceId
> +if { ${R_Ip6ConfigInterfaceId.Id(0)} == 0 && ${R_Ip6ConfigInterfaceId.Id(1)} ==
> 1 && ${R_Ip6ConfigInterfaceId.Id(2)} == 2 && ${R_Ip6ConfigInterfaceId.Id(3)}
> == 3 && ${R_Ip6ConfigInterfaceId.Id(4)} == 4 && ${R_Ip6ConfigInterfaceId.Id(5)}
> == 5 && ${R_Ip6ConfigInterfaceId.Id(6)} == 6 && ${R_Ip6ConfigInterfaceId.Id(7)}
> == 7} {
> + set assert pass
> +} else {
> + set assert fail
> +}
> +RecordAssertion $assert $Ip6ConfigSetDataFunc1AssertionGuid002 \
> + "Set AltInterfaceId succeeds(event is signaled correctly and data
> correct)."
> +
> +#
> +# Check Point: Call Ip6Config->SetData to set DadXmits
> +#
> +SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> +SetVar R_Ip6ConfigDataSize [Sizeof
> EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS]
> +SetVar R_Ip6ConfigDadTransmits.DupAddrDetectTransmits 3
> +
> +SetVar R_Context1 0
> +BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1,
> &@R_Context1,\
> + &@R_DoneEvent1, &@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "BS.CreateEvent." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +Ip6Config->RegisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.RegisterDataNotify - Register notification event for
> configuration." \
> + "ReturnStatus - $R_Status, ExpectedStatus -
> $EFI_SUCCESS"
> +
> +Ip6Config->SetData
> "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigDadTransmits,
> &@R_Status"
> +GetAck
> +GetVar R_Status
> +if { $R_Status == $EFI_SUCCESS } {
> + set assert pass
> + RecordAssertion $assert $Ip6ConfigSetDataFunc1AssertionGuid003
> \
> + "Ip6Config.SetData - Call SetData to set DadXmits." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +} elseif { $R_Status == $EFI_NOT_READY } {
> + set i 0
> + set L_TimeOut 30
> + while { 1 > 0 } {
> + GetVar R_Context1
> + if { $R_Context1 == 1 } {
> + break
> + } elseif { $i == $L_TimeOut } {
> + set assert fail
> + RecordAssertion $assert
> $Ip6ConfigSetDataFunc1AssertionGuid003 \
> + "SetData failed.(event hasn't been signaled before TIMEOUT)." \
> + "TIMEOUT value is $L_TimeOut (sec), "
> +
> + SetVar R_Ip6ConfigDataType $IP6CDT(AltInterfaceId)
> + Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + SetVar R_Ip6ConfigDataType
> $IP6CDT(DupAddrDetectTransmits)
> + Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_SETDATA_FUNC1
> + EndLog
> + return
> + }
> + incr i
> + Stall 1
> + }
> +} else {
> + set assert fail
> + RecordAssertion $assert $Ip6ConfigSetDataFunc1AssertionGuid003
> \
> + "Ip6Config.SetData - Call SetData to set manual DadXmits." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> + SetVar R_Ip6ConfigDataType $IP6CDT(AltInterfaceId)
> + Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> + Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_SETDATA_FUNC1
> + EndLog
> +}
> +
> +Ip6Config->GetData
> "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigDadTransmit
> s,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.GetData - Call GetData to get DadXmits value." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +GetVar R_Ip6ConfigDadTransmits
> +if { ${R_Ip6ConfigDadTransmits.DupAddrDetectTransmits} == 3 } {
> + set assert pass
> +} else {
> + set assert fail
> +}
> +RecordAssertion $assert $Ip6ConfigSetDataFunc1AssertionGuid004 \
> + "Set DadXmits succeeds(event is signaled correctly and data
> correct)."
> +
> +#
> +# Clean up
> +#
> +SetVar R_Ip6ConfigDataType $IP6CDT(AltInterfaceId)
> +Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.UnregisterDataNotify - Unregister notification event for
> configuration." \
> + "ReturnStatus - $R_Status, ExpectedStatus -
> $EFI_SUCCESS"
> +BS->CloseEvent {@R_DoneEvent,&@R_Status}
> +GetAck
> +
> +SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> +Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.UnregisterDataNotify - Unregister notification event for
> configuration." \
> + "ReturnStatus - $R_Status, ExpectedStatus -
> $EFI_SUCCESS"
> +BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> +GetAck
> +
> +EndScope _IP6CONFIG_SETDATA_FUNC1
> +
> EndLog
> \ No newline at end of file
> diff --git a/uefi-sct/EMS/Bin/TestCase/IP6Config/SetData.Func2.Case1.tcl
> b/uefi-sct/EMS/Bin/TestCase/IP6Config/SetData.Func2.Case1.tcl
> new file mode 100644
> index 0000000..4d9ec42
> --- /dev/null
> +++ b/uefi-sct/EMS/Bin/TestCase/IP6Config/SetData.Func2.Case1.tcl
> @@ -0,0 +1,838 @@
> +#
> +# Copyright (c) 2018, Intel Corporation. All rights reserved.<BR>
> +#
> +# This program and the accompanying materials
> +# are licensed and made available under the terms and conditions of the BSD
> License
> +# which accompanies this distribution. The full text of the license may be
> found at
> +# http://opensource.org/licenses/bsd-license.php
> +#
> +# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS"
> BASIS,
> +# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER
> EXPRESS OR IMPLIED.
> +#
> +################################################################
> ################
> +CaseLevel CONFORMANCE
> +CaseAttribute AUTO
> +CaseVerboseLevel DEFAULT
> +set reportfile report.csv
> +
> +#
> +# test case Name, category, description, GUID...
> +#
> +CaseGuid 79F40434-2684-459C-8EEB-DCFB822D93F7
> +CaseName SetData.Func2.Case1
> +CaseCategory IP6Config
> +CaseDescription {SetData to clear the configuration.}
> +
> +################################################################
> ################
> +Include IP6Config/Include/Ip6Config.inc.tcl
> +
> +#
> +# Begin log ...
> +#
> +BeginLog
> +
> +#
> +# BeginScope
> +#
> +BeginScope _IP6CONFIG_SETDATA_FUNC2
> +
> +#
> +# Parameter Definition
> +# R_ represents "Remote EFI Side Parameter"
> +# L_ represents "Local ENTS Side Parameter"
> +#
> +UINTN R_Status
> +UINTN R_Context
> +UINTN R_DoneEvent
> +UINTN R_Ip6ConfigDataSize
> +UINT32 R_Ip6ConfigDataType
> +EFI_IP6_CONFIG_INTERFACE_INFO R_Ip6ConfigInterfaceInfo
> +EFI_IP6_CONFIG_INTERFACE_ID R_Ip6ConfigInterfaceId
> +UINT32 R_Ip6ConfigPolicy
> +EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS
> R_Ip6ConfigDadTransmits
> +
> +#
> +# Check Point: Call Ip6Config->SetData to set manual policy
> +#
> +SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> +SetVar R_Ip6ConfigDataSize [Sizeof UINT32]
> +SetVar R_Ip6ConfigPolicy $IP6CP(Manual)
> +
> +SetVar R_Context 0
> +BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1,
> &@R_Context,\
> + &@R_DoneEvent, &@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "BS.CreateEvent." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +Ip6Config->RegisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.RegisterDataNotify - Register notification event for
> configuration." \
> + "ReturnStatus - $R_Status, ExpectedStatus -
> $EFI_SUCCESS"
> +
> +Ip6Config->SetData
> "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_S
> tatus"
> +GetAck
> +GetVar R_Status
> +if { $R_Status == $EFI_SUCCESS } {
> + set assert pass
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.SetData - Call SetData to set manual policy." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +} elseif { $R_Status == $EFI_NOT_READY } {
> + set i 0
> + set L_TimeOut 30
> + while { 1 > 0 } {
> + GetVar R_Context
> + if { $R_Context == 1 } {
> + break
> + } elseif { $i == $L_TimeOut } {
> + set assert fail
> + RecordAssertion $assert $GenericAssertionGuid \
> + "SetData failed.(event hasn't been signaled before TIMEOUT)." \
> + "TIMEOUT value is $L_TimeOut (sec), "
> +
> + SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> + Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_SETDATA_FUNC2
> + EndLog
> + return
> + }
> + incr i
> + Stall 1
> + }
> +} else {
> + set assert fail
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.SetData - Call SetData to set manual policy." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> + SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> + Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_SETDATA_FUNC2
> + EndLog
> + return
> +}
> +
> +SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> +Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> +GetAck
> +BS->CloseEvent {@R_DoneEvent,&@R_Status}
> +GetAck
> +
> +Ip6Config->GetData
> "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_
> Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.GetData - Call GetData to get policy value." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +GetVar R_Ip6ConfigPolicy
> +if { $R_Ip6ConfigPolicy == $IP6CP(Manual) } {
> + set assert pass
> +} else {
> + set assert fail
> +
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Set manual policy fails(event is signaled correctly but data is
> incorrect)."
> + EndScope _IP6CONFIG_SETDATA_FUNC2
> + EndLog
> + return
> +}
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Set manual policy succeeds(event is signaled correctly and data
> correct)."
> +
> +#
> +# Check Point: Call Ip6Config->SetData to set DadXmits 20
> +#
> +SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> +SetVar R_Ip6ConfigDataSize [Sizeof
> EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS]
> +SetVar R_Ip6ConfigDadTransmits.DupAddrDetectTransmits 20
> +
> +SetVar R_Context 0
> +BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1,
> &@R_Context,\
> + &@R_DoneEvent, &@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "BS.CreateEvent." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +Ip6Config->RegisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.RegisterDataNotify - Register notification event for
> configuration." \
> + "ReturnStatus - $R_Status, ExpectedStatus -
> $EFI_SUCCESS"
> +
> +Ip6Config->SetData
> "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigDadTransmits,
> &@R_Status"
> +GetAck
> +GetVar R_Status
> +if { $R_Status == $EFI_SUCCESS } {
> + set assert pass
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.SetData - Call SetData to set DadXmits 20." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +} elseif { $R_Status == $EFI_NOT_READY } {
> + set i 0
> + set L_TimeOut 30
> + while { 1 > 0 } {
> + GetVar R_Context
> + if { $R_Context == 1 } {
> + break
> + } elseif { $i == $L_TimeOut } {
> + set assert fail
> + RecordAssertion $assert $GenericAssertionGuid \
> + "SetData failed.(event hasn't been signaled before TIMEOUT)." \
> + "TIMEOUT value is $L_TimeOut (sec), "
> +
> + SetVar R_Ip6ConfigDataType
> $IP6CDT(DupAddrDetectTransmits)
> + Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_SETDATA_FUNC2
> + EndLog
> + return
> + }
> + incr i
> + Stall 1
> + }
> +} else {
> + set assert fail
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.SetData - Call SetData to set DadXmits 20." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> + SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> + Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_SETDATA_FUNC2
> + EndLog
> + return
> +}
> +
> +SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> +Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> +GetAck
> +BS->CloseEvent {@R_DoneEvent,&@R_Status}
> +GetAck
> +
> +Ip6Config->GetData
> "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigDadTransmit
> s,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.GetData - Call GetData to get DadXmits value." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +GetVar R_Ip6ConfigDadTransmits.DupAddrDetectTransmits
> +if { ${R_Ip6ConfigDadTransmits.DupAddrDetectTransmits} == 20 } {
> + set assert pass
> +} else {
> + set assert fail
> +
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Set DadXmits fails(event is signaled correctly but data is
> incorrect)."
> +
> + EndScope _IP6CONFIG_SETDATA_FUNC2
> + EndLog
> + return
> +}
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Set DadXmits succeeds(event is signaled correctly and data
> correct)."
> +
> +Stall 30
> +
> +#
> +# Check Point : Set Manual Address with valid parameter
> +#
> +
> +EFI_IP6_CONFIG_MANUAL_ADDRESS R_Temp_Ip6ConfigManualAddress
> +
> +set L_ManualListLen 1
> +EFI_IP6_CONFIG_MANUAL_ADDRESS R_Ip6ConfigManualAddress
> +set L_UnitLen [Sizeof EFI_IP6_CONFIG_MANUAL_ADDRESS]
> +set L_ListLen [expr {$L_UnitLen * $L_ManualListLen}]
> +SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
> +SetVar R_Ip6ConfigDataSize $L_ListLen
> +SetVar R_Temp_Ip6ConfigManualAddress.IsAnycast FALSE
> +SetVar R_Temp_Ip6ConfigManualAddress.PrefixLength 64
> +SetIpv6Address R_Temp_Ip6ConfigManualAddress.Address "2002::5000"
> +SetVar R_Ip6ConfigManualAddress @R_Temp_Ip6ConfigManualAddress
> +
> +SetVar R_Context 0
> +BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1,
> &@R_Context,\
> + &@R_DoneEvent, &@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "BS.CreateEvent." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +Ip6Config->RegisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.RegisterDataNotify - Register notification event for
> configuration." \
> + "ReturnStatus - $R_Status, ExpectedStatus -
> $EFI_SUCCESS"
> +
> +Ip6Config->SetData
> "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigManualAddres
> s,&@R_Status"
> +GetAck
> +GetVar R_Status
> +if { $R_Status == $EFI_SUCCESS } {
> + set assert pass
> + RecordAssertion $assert $Ip6ConfigSetDataFunc2AssertionGuid001
> \
> + "Ip6Config.SetData - Call SetData to set MANUAL ADDRESS." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +} elseif { $R_Status == $EFI_NOT_READY } {
> + set i 0
> + set L_TimeOut 30
> + while { 1 > 0 } {
> + GetVar R_Context
> + if { $R_Context == 1 } {
> + break
> + } elseif { $i == $L_TimeOut } {
> + set assert fail
> + RecordAssertion $assert
> $Ip6ConfigSetDataFunc2AssertionGuid001 \
> + "SetData to set MANUAL ADDRESS fail.(event hasn't been signaled
> before TIMEOUT)." \
> + "TIMEOUT value is $L_TimeOut (sec), "
> +
> + SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
> + Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_SETDATA_FUNC2
> + EndLog
> + return
> + }
> + incr i
> + Stall 1
> + }
> +} else {
> + set assert fail
> + RecordAssertion $assert $Ip6ConfigSetDataFunc2AssertionGuid001
> \
> + "Ip6Config.SetData - Call SetData to set MANUAL ADDRESS." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> + SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
> + Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_SETDATA_FUNC2
> + EndLog
> + return
> +}
> +
> +SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
> +Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> +GetAck
> +BS->CloseEvent {@R_DoneEvent,&@R_Status}
> +GetAck
> +
> +Ip6Config->GetData
> "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigManualAddr
> ess,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.GetData - Call GetData to get Manual Address." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +GetVar R_Ip6ConfigManualAddress
> +
> +set L_Proc_Ipv6Address [GetIpv6Address {R_Ip6ConfigManualAddress.Address}]
> +if { [string compare $L_Proc_Ipv6Address
> 2002:0000:0000:0000:0000:0000:0000:5000] != 0 } {
> + puts $L_Proc_Ipv6Address
> + set assert fail
> +
> + RecordAssertion $assert $Ip6ConfigSetDataFunc2AssertionGuid002
> \
> + "Ip6Config.SetData - Set Gateway fail(event is signaled correctly but
> data is incorrect.)"
> +} elseif {${R_Ip6ConfigManualAddress.PrefixLength} != 64} {
> + set assert fail
> +
> + RecordAssertion $assert $Ip6ConfigSetDataFunc2AssertionGuid002
> \
> + "Ip6Config.SetData - Set Gateway fail(event is signaled correctly but
> data is incorrect.)"
> +
> +} elseif {${R_Ip6ConfigManualAddress.IsAnycast} != false} {
> + set assert fail
> +
> + RecordAssertion $assert $Ip6ConfigSetDataFunc2AssertionGuid002
> \
> + "Ip6Config.SetData - Set Gateway fail(event is signaled correctly but
> data is incorrect.)"
> +
> +} else {
> + RecordAssertion $assert $Ip6ConfigSetDataFunc2AssertionGuid002
> \
> + "Ip6Config.SetData - Set Gateway success(event is signaled correctly
> and data is correct.)"
> +}
> +
> +#
> +# Clear the Manual Address
> +#
> +SetVar R_Context 0
> +BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1,
> &@R_Context,\
> + &@R_DoneEvent, &@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "BS.CreateEvent." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +Ip6Config->RegisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.RegisterDataNotify - Register notification event for
> configuration." \
> + "ReturnStatus - $R_Status, ExpectedStatus -
> $EFI_SUCCESS"
> +
> +Ip6Config->SetData "@R_Ip6ConfigDataType,0,NULL,&@R_Status"
> +GetAck
> +GetVar R_Status
> +if { $R_Status == $EFI_SUCCESS } {
> + set assert pass
> + RecordAssertion $assert $Ip6ConfigSetDataFunc2AssertionGuid003
> \
> + "Ip6Config.SetData - Call SetData to clear MANUAL ADDRESS." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +} elseif { $R_Status == $EFI_NOT_READY } {
> + set i 0
> + set L_TimeOut 30
> + while { 1 > 0 } {
> + GetVar R_Context
> + if { $R_Context == 1 } {
> + break
> + } elseif { $i == $L_TimeOut } {
> + set assert fail
> + RecordAssertion $assert
> $Ip6ConfigSetDataFunc2AssertionGuid003 \
> + "SetData to clear MANUAL ADDRESS fail.(event hasn't been
> signaled before TIMEOUT)." \
> + "TIMEOUT value is $L_TimeOut (sec), "
> +
> + SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
> + Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_SETDATA_FUNC2
> + EndLog
> + return
> + }
> + incr i
> + Stall 1
> + }
> +} else {
> + set assert fail
> + RecordAssertion $assert $Ip6ConfigSetDataFunc2AssertionGuid003
> \
> + "Ip6Config.SetData - Call SetData to clear MANUAL ADDRESS." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> + SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
> + Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_SETDATA_FUNC2
> + EndLog
> + return
> +}
> +
> +SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
> +Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> +GetAck
> +BS->CloseEvent {@R_DoneEvent,&@R_Status}
> +GetAck
> +
> +Ip6Config->GetData
> "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigManualAddr
> ess,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_NOT_FOUND]
> +RecordAssertion $assert $Ip6ConfigSetDataFunc2AssertionGuid004 \
> + "Ip6Config.GetData - Call GetData to get Manual Address." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_NOT_FOUND"
> +
> +
> +#
> +# Check Point : Set Gateway with valid parameter
> +#
> +
> +set L_GatewayListLen 1
> +EFI_IPv6_ADDRESS R_Temp_Ip6ConfigGateway
> +EFI_IPv6_ADDRESS R_Ip6ConfigGateway
> +set L_UnitLen [Sizeof EFI_IPv6_ADDRESS]
> +set L_ListLen [expr {$L_UnitLen * $L_GatewayListLen}]
> +SetVar R_Ip6ConfigDataType $IP6CDT(Gateway)
> +SetVar R_Ip6ConfigDataSize $L_ListLen
> +
> +SetIpv6Address R_Temp_Ip6ConfigGateway "2002::5001"
> +SetVar R_Ip6ConfigGateway @R_Temp_Ip6ConfigGateway
> +
> +SetVar R_Context 0
> +BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1,
> &@R_Context,\
> + &@R_DoneEvent, &@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "BS.CreateEvent." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +Ip6Config->RegisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.RegisterDataNotify - Register notification event for
> configuration." \
> + "ReturnStatus - $R_Status, ExpectedStatus -
> $EFI_SUCCESS"
> +
> +Ip6Config->SetData
> "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigGateway,&@R
> _Status"
> +GetAck
> +GetVar R_Status
> +if { $R_Status == $EFI_SUCCESS } {
> + set assert pass
> + RecordAssertion $assert $Ip6ConfigSetDataFunc2AssertionGuid005
> \
> + "Ip6Config.SetData - Call SetData to set Gateway." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +} elseif { $R_Status == $EFI_NOT_READY } {
> + set i 0
> + set L_TimeOut 30
> + while { 1 > 0 } {
> + GetVar R_Context
> + if { $R_Context == 1 } {
> + break
> + } elseif { $i == $L_TimeOut } {
> + set assert fail
> + RecordAssertion $assert
> $Ip6ConfigSetDataFunc2AssertionGuid005 \
> + "SetData to set Gateway fail.(event hasn't been signaled before
> TIMEOUT)." \
> + "TIMEOUT value is $L_TimeOut (sec), "
> +
> + SetVar R_Ip6ConfigDataType $IP6CDT(Gateway)
> + Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_SETDATA_FUNC2
> + EndLog
> + return
> + }
> + incr i
> + Stall 1
> + }
> +} else {
> + set assert fail
> + RecordAssertion $assert $Ip6ConfigSetDataFunc2AssertionGuid005
> \
> + "Ip6Config.SetData - Call SetData to set Gateway." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> + SetVar R_Ip6ConfigDataType $IP6CDT(Gateway)
> + Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_SETDATA_FUNC2
> + EndLog
> + return
> +}
> +
> +SetVar R_Ip6ConfigDataType $IP6CDT(Gateway)
> +Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> +GetAck
> +BS->CloseEvent {@R_DoneEvent,&@R_Status}
> +GetAck
> +
> +Ip6Config->GetData
> "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigGateway,&
> @R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.GetData - Call GetData to get Gateway." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +GetVar R_Ip6ConfigGateway
> +
> +set L_Proc_Ipv6Address [GetIpv6Address {R_Ip6ConfigGateway}]
> +if { [string compare $L_Proc_Ipv6Address
> 2002:0000:0000:0000:0000:0000:0000:5001] != 0 } {
> + puts $L_Proc_Ipv6Address
> + set assert fail
> +
> + RecordAssertion $assert $Ip6ConfigSetDataFunc2AssertionGuid006
> \
> + "Ip6Config.SetData - Set Gateway fail(event is signaled correctly but
> data is incorrect.)"
> +} else {
> +
> + RecordAssertion $assert $Ip6ConfigSetDataFunc2AssertionGuid006
> \
> + "Ip6Config.SetData - Set Gateway success(event is signaled correctly
> and data is correct.)"
> +}
> +
> +#
> +# Clear the Gateway
> +#
> +SetVar R_Context 0
> +BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1,
> &@R_Context,\
> + &@R_DoneEvent, &@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "BS.CreateEvent." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +Ip6Config->RegisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.RegisterDataNotify - Register notification event for
> configuration." \
> + "ReturnStatus - $R_Status, ExpectedStatus -
> $EFI_SUCCESS"
> +
> +Ip6Config->SetData "@R_Ip6ConfigDataType,0,NULL,&@R_Status"
> +GetAck
> +GetVar R_Status
> +if { $R_Status == $EFI_SUCCESS } {
> + set assert pass
> + RecordAssertion $assert $Ip6ConfigSetDataFunc2AssertionGuid007
> \
> + "Ip6Config.SetData - Call SetData to clear Gateway." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +} elseif { $R_Status == $EFI_NOT_READY } {
> + set i 0
> + set L_TimeOut 30
> + while { 1 > 0 } {
> + GetVar R_Context
> + if { $R_Context == 1 } {
> + break
> + } elseif { $i == $L_TimeOut } {
> + set assert fail
> + RecordAssertion $assert
> $Ip6ConfigSetDataFunc2AssertionGuid007 \
> + "SetData to clear Gateway fail.(event hasn't been signaled before
> TIMEOUT)." \
> + "TIMEOUT value is $L_TimeOut (sec), "
> +
> + SetVar R_Ip6ConfigDataType $IP6CDT(Gateway)
> + Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_SETDATA_FUNC2
> + EndLog
> + return
> + }
> + incr i
> + Stall 1
> + }
> +} else {
> + set assert fail
> + RecordAssertion $assert $Ip6ConfigSetDataFunc2AssertionGuid007
> \
> + "Ip6Config.SetData - Call SetData to clear Gateway." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> + SetVar R_Ip6ConfigDataType $IP6CDT(Gateway)
> + Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_SETDATA_FUNC2
> + EndLog
> + return
> +}
> +
> +SetVar R_Ip6ConfigDataType $IP6CDT(Gateway)
> +Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> +GetAck
> +BS->CloseEvent {@R_DoneEvent,&@R_Status}
> +GetAck
> +
> +Ip6Config->GetData
> "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigGateway,&
> @R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_NOT_FOUND]
> +RecordAssertion $assert $Ip6ConfigSetDataFunc2AssertionGuid008 \
> + "Ip6Config.GetData - Call GetData to get Gateway." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_NOT_FOUND"
> +
> +
> +#
> +# Check Point : Set DnsServer with valid parameter
> +#
> +
> +set L_DnsServerListLen 1
> +EFI_IPv6_ADDRESS R_Temp_Ip6ConfigDnsServer
> +EFI_IPv6_ADDRESS R_Ip6ConfigDnsServer
> +set L_UnitLen [Sizeof EFI_IPv6_ADDRESS]
> +set L_ListLen [expr {$L_UnitLen * $L_DnsServerListLen}]
> +SetVar R_Ip6ConfigDataType $IP6CDT(DnsServer)
> +SetVar R_Ip6ConfigDataSize $L_ListLen
> +
> +SetIpv6Address R_Temp_Ip6ConfigDnsServer "2002::5002"
> +SetVar R_Ip6ConfigDnsServer @R_Temp_Ip6ConfigDnsServer
> +
> +SetVar R_Context 0
> +BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1,
> &@R_Context,\
> + &@R_DoneEvent, &@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "BS.CreateEvent." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +Ip6Config->RegisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.RegisterDataNotify - Register notification event for
> configuration." \
> + "ReturnStatus - $R_Status, ExpectedStatus -
> $EFI_SUCCESS"
> +
> +Ip6Config->SetData
> "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigDnsServer,&@
> R_Status"
> +GetAck
> +GetVar R_Status
> +if { $R_Status == $EFI_SUCCESS } {
> + set assert pass
> + RecordAssertion $assert $Ip6ConfigSetDataFunc2AssertionGuid009
> \
> + "Ip6Config.SetData - Call SetData to set DnsServer." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +} elseif { $R_Status == $EFI_NOT_READY } {
> + set i 0
> + set L_TimeOut 30
> + while { 1 > 0 } {
> + GetVar R_Context
> + if { $R_Context == 1 } {
> + break
> + } elseif { $i == $L_TimeOut } {
> + set assert fail
> + RecordAssertion $assert
> $Ip6ConfigSetDataFunc2AssertionGuid009 \
> + "SetData to set DnsServer fail.(event hasn't been signaled before
> TIMEOUT)." \
> + "TIMEOUT value is $L_TimeOut (sec), "
> +
> + SetVar R_Ip6ConfigDataType $IP6CDT(DnsServer)
> + Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_SETDATA_FUNC2
> + EndLog
> + return
> + }
> + incr i
> + Stall 1
> + }
> +} else {
> + set assert fail
> + RecordAssertion $assert $Ip6ConfigSetDataFunc2AssertionGuid009
> \
> + "Ip6Config.SetData - Call SetData to set DnsServer." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> + SetVar R_Ip6ConfigDataType $IP6CDT(DnsServer)
> + Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_SETDATA_FUNC2
> + EndLog
> + return
> +}
> +
> +SetVar R_Ip6ConfigDataType $IP6CDT(DnsServer)
> +Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> +GetAck
> +BS->CloseEvent {@R_DoneEvent,&@R_Status}
> +GetAck
> +
> +Ip6Config->GetData
> "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigDnsServer,&
> @R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.GetData - Call GetData to get DnsServer." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +GetVar R_Ip6ConfigDnsServer
> +
> +set L_Proc_Ipv6Address [GetIpv6Address {R_Ip6ConfigDnsServer}]
> +if { [string compare $L_Proc_Ipv6Address
> 2002:0000:0000:0000:0000:0000:0000:5002] != 0 } {
> + set assert fail
> +
> + RecordAssertion $assert $Ip6ConfigSetDataFunc2AssertionGuid010
> \
> + "Ip6Config.SetData - Set DnsServer fail(event is signaled correctly but
> data is incorrect.)"
> +} else {
> + RecordAssertion $assert $Ip6ConfigSetDataFunc2AssertionGuid010
> \
> + "Ip6Config.SetData - Set DnsServer success(event is signaled correctly
> and data is correct.)"
> +}
> +
> +#
> +# Clear the DnsServer
> +#
> +SetVar R_Context 0
> +BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1,
> &@R_Context,\
> + &@R_DoneEvent, &@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "BS.CreateEvent." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +Ip6Config->RegisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.RegisterDataNotify - Register notification event for
> configuration." \
> + "ReturnStatus - $R_Status, ExpectedStatus -
> $EFI_SUCCESS"
> +
> +Ip6Config->SetData "@R_Ip6ConfigDataType,0,NULL,&@R_Status"
> +GetAck
> +GetVar R_Status
> +if { $R_Status == $EFI_SUCCESS } {
> + set assert pass
> + RecordAssertion $assert $Ip6ConfigSetDataFunc2AssertionGuid011
> \
> + "Ip6Config.SetData - Call SetData to clear DnsServer." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +} elseif { $R_Status == $EFI_NOT_READY } {
> + set i 0
> + set L_TimeOut 30
> + while { 1 > 0 } {
> + GetVar R_Context
> + if { $R_Context == 1 } {
> + break
> + } elseif { $i == $L_TimeOut } {
> + set assert fail
> + RecordAssertion $assert
> $Ip6ConfigSetDataFunc2AssertionGuid011 \
> + "SetData to clear DnsServer fail.(event hasn't been signaled before
> TIMEOUT)." \
> + "TIMEOUT value is $L_TimeOut (sec), "
> +
> + SetVar R_Ip6ConfigDataType $IP6CDT(DnsServer)
> + Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_SETDATA_FUNC2
> + EndLog
> + return
> + }
> + incr i
> + Stall 1
> + }
> +} else {
> + set assert fail
> + RecordAssertion $assert $Ip6ConfigSetDataFunc2AssertionGuid011
> \
> + "Ip6Config.SetData - Call SetData to clear DnsServer." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> + SetVar R_Ip6ConfigDataType $IP6CDT(DnsServer)
> + Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_SETDATA_FUNC2
> + EndLog
> + return
> +}
> +
> +SetVar R_Ip6ConfigDataType $IP6CDT(DnsServer)
> +Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> +GetAck
> +BS->CloseEvent {@R_DoneEvent,&@R_Status}
> +GetAck
> +
> +Ip6Config->GetData
> "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigDnsServer,&
> @R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_NOT_FOUND]
> +RecordAssertion $assert $Ip6ConfigSetDataFunc2AssertionGuid012 \
> + "Ip6Config.GetData - Call GetData to get DnsServer." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_NOT_FOUND"
> +
> +
> +EndScope _IP6CONFIG_SETDATA_FUNC2
> +
> +EndLog
> \ No newline at end of file
> diff --git a/uefi-
> sct/EMS/Bin/TestCase/IP6Config/UnregisterDataNotify.Conf1.Case1.tcl b/uefi-
> sct/EMS/Bin/TestCase/IP6Config/UnregisterDataNotify.Conf1.Case1.tcl
> index a36469f..35b36ce 100644
> --- a/uefi-
> sct/EMS/Bin/TestCase/IP6Config/UnregisterDataNotify.Conf1.Case1.tcl
> +++ b/uefi-
> sct/EMS/Bin/TestCase/IP6Config/UnregisterDataNotify.Conf1.Case1.tcl
> @@ -1,90 +1,90 @@
> -#
> -# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
> -# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
> -#
> -# This program and the accompanying materials
> -# are licensed and made available under the terms and conditions of the BSD
> License
> -# which accompanies this distribution. The full text of the license may be
> found at
> -# http://opensource.org/licenses/bsd-license.php
> -#
> -# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS"
> BASIS,
> -# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER
> EXPRESS OR IMPLIED.
> -#
> -
> #################################################################
> ###############
> -CaseLevel CONFORMANCE
> -CaseAttribute AUTO
> -CaseVerboseLevel DEFAULT
> -set reportfile report.csv
> -
> -#
> -# test case Name, category, description, GUID...
> -#
> -CaseGuid 8B7B6AA6-2DCB-434b-9533-6346ABCC686D
> -CaseName UnregisterDataNotify.Conf1.Case1
> -CaseCategory IP6Config
> -CaseDescription {UnregisterDataNotify must not succeed when event is NULL.}
> -
> -
> #################################################################
> ###############
> -Include IP6Config/Include/Ip6Config.inc.tcl
> -
> -
> -#
> -# Begin log ...
> -#
> -BeginLog
> -
> -#
> -# BeginScope
> -#
> -BeginScope _IP6CONFIG_UNREGISTERDATANOTIFY_CONF1
> -
> -#
> -# Parameter Definition
> -# R_ represents "Remote EFI Side Parameter"
> -# L_ represents "Local ENTS Side Parameter"
> -#
> -UINTN R_Status
> -UINTN R_Context
> -UINTN R_DoneEvent
> -UINTN R_Ip6ConfigDataSize
> -UINT32 R_Ip6ConfigDataType
> -EFI_IP6_CONFIG_INTERFACE_INFO R_Ip6ConfigInterfaceInfo
> -EFI_IP6_CONFIG_INTERFACE_ID R_Ip6ConfigInterfaceId
> -UINT32 R_Ip6ConfigPolicy
> -EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS R_Ip6ConfigDadTransmits
> -
> -#
> -# Check Point: Call Ip6Config->SetData to set manual policy
> -#
> -SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> -SetVar R_Ip6ConfigDataSize [Sizeof UINT32]
> -SetVar R_Ip6ConfigPolicy $IP6CP(Manual)
> -
> -SetVar R_Context 0
> -BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context,\
> - &@R_DoneEvent, &@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "BS.CreateEvent." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -#
> -# Check Point: Call Ip6Config->UnregisterDataNotify with the event NULL
> -#
> -Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType, 0 ,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_INVALID_PARAMETER]
> -RecordAssertion $assert
> $Ip6ConfigUnregisterDataNotifyConf1AssertionGuid001 \
> - "Ip6Config.UnregisterDataNotify - Unregister notification event with
> the event NULL." \
> - "ReturnStatus - $R_Status, ExpectedStatus -
> $EFI_INVALID_PARAMETER"
> -
> -#
> -# Clean up
> -#
> -BS->CloseEvent {@R_DoneEvent,&@R_Status}
> -GetAck
> -
> -EndScope _IP6CONFIG_UNREGISTERDATANOTIFY_CONF1
> -
> +#
> +# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
> +# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
> +#
> +# This program and the accompanying materials
> +# are licensed and made available under the terms and conditions of the BSD
> License
> +# which accompanies this distribution. The full text of the license may be
> found at
> +# http://opensource.org/licenses/bsd-license.php
> +#
> +# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS"
> BASIS,
> +# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER
> EXPRESS OR IMPLIED.
> +#
> +################################################################
> ################
> +CaseLevel CONFORMANCE
> +CaseAttribute AUTO
> +CaseVerboseLevel DEFAULT
> +set reportfile report.csv
> +
> +#
> +# test case Name, category, description, GUID...
> +#
> +CaseGuid 8B7B6AA6-2DCB-434b-9533-6346ABCC686D
> +CaseName UnregisterDataNotify.Conf1.Case1
> +CaseCategory IP6Config
> +CaseDescription {UnregisterDataNotify must not succeed when event is NULL.}
> +
> +################################################################
> ################
> +Include IP6Config/Include/Ip6Config.inc.tcl
> +
> +
> +#
> +# Begin log ...
> +#
> +BeginLog
> +
> +#
> +# BeginScope
> +#
> +BeginScope _IP6CONFIG_UNREGISTERDATANOTIFY_CONF1
> +
> +#
> +# Parameter Definition
> +# R_ represents "Remote EFI Side Parameter"
> +# L_ represents "Local ENTS Side Parameter"
> +#
> +UINTN R_Status
> +UINTN R_Context
> +UINTN R_DoneEvent
> +UINTN R_Ip6ConfigDataSize
> +UINT32 R_Ip6ConfigDataType
> +EFI_IP6_CONFIG_INTERFACE_INFO R_Ip6ConfigInterfaceInfo
> +EFI_IP6_CONFIG_INTERFACE_ID R_Ip6ConfigInterfaceId
> +UINT32 R_Ip6ConfigPolicy
> +EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS
> R_Ip6ConfigDadTransmits
> +
> +#
> +# Check Point: Call Ip6Config->SetData to set manual policy
> +#
> +SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> +SetVar R_Ip6ConfigDataSize [Sizeof UINT32]
> +SetVar R_Ip6ConfigPolicy $IP6CP(Manual)
> +
> +SetVar R_Context 0
> +BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1,
> &@R_Context,\
> + &@R_DoneEvent, &@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "BS.CreateEvent." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +#
> +# Check Point: Call Ip6Config->UnregisterDataNotify with the event NULL
> +#
> +Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType, 0 ,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_INVALID_PARAMETER]
> +RecordAssertion $assert
> $Ip6ConfigUnregisterDataNotifyConf1AssertionGuid001 \
> + "Ip6Config.UnregisterDataNotify - Unregister notification event with
> the event NULL." \
> + "ReturnStatus - $R_Status, ExpectedStatus -
> $EFI_INVALID_PARAMETER"
> +
> +#
> +# Clean up
> +#
> +BS->CloseEvent {@R_DoneEvent,&@R_Status}
> +GetAck
> +
> +EndScope _IP6CONFIG_UNREGISTERDATANOTIFY_CONF1
> +
> EndLog
> \ No newline at end of file
> diff --git a/uefi-
> sct/EMS/Bin/TestCase/IP6Config/UnregisterDataNotify.Conf2.Case1.tcl b/uefi-
> sct/EMS/Bin/TestCase/IP6Config/UnregisterDataNotify.Conf2.Case1.tcl
> index d41f141..7eb5808 100644
> --- a/uefi-
> sct/EMS/Bin/TestCase/IP6Config/UnregisterDataNotify.Conf2.Case1.tcl
> +++ b/uefi-
> sct/EMS/Bin/TestCase/IP6Config/UnregisterDataNotify.Conf2.Case1.tcl
> @@ -1,83 +1,83 @@
> -#
> -# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
> -# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
> -#
> -# This program and the accompanying materials
> -# are licensed and made available under the terms and conditions of the BSD
> License
> -# which accompanies this distribution. The full text of the license may be
> found at
> -# http://opensource.org/licenses/bsd-license.php
> -#
> -# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS"
> BASIS,
> -# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER
> EXPRESS OR IMPLIED.
> -#
> -
> #################################################################
> ###############
> -CaseLevel CONFORMANCE
> -CaseAttribute AUTO
> -CaseVerboseLevel DEFAULT
> -set reportfile report.csv
> -
> -#
> -# test case Name, category, description, GUID...
> -#
> -CaseGuid 9CE66A42-FADC-4d44-B577-B58CED8E984B
> -CaseName UnregisterDataNotify.Conf2.Case1
> -CaseCategory IP6Config
> -CaseDescription {UnregisterDataNotify must not succeed when then event has
> not been registered for the data type ever.}
> -
> -
> #################################################################
> ###############
> -Include IP6Config/Include/Ip6Config.inc.tcl
> -
> -
> -#
> -# Begin log ...
> -#
> -BeginLog
> -
> -#
> -# BeginScope
> -#
> -BeginScope _IP6CONFIG_UNREGISTERDATANOTIFY_CONF2_CASE1
> -
> -#
> -# Parameter Definition
> -# R_ represents "Remote EFI Side Parameter"
> -# L_ represents "Local ENTS Side Parameter"
> -#
> -UINTN R_Status
> -UINTN R_Context
> -UINTN R_DoneEvent
> -UINTN R_Ip6ConfigDataSize
> -UINT32 R_Ip6ConfigDataType
> -
> -#
> -# Check Point: Call Ip6Config->UnregisterDataNotify with the event not
> registered
> -#
> -
> -SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
> -SetVar R_Ip6ConfigDataSize [Sizeof EFI_IP6_CONFIG_MANUAL_ADDRESS]
> -
> -SetVar R_Context 0
> -BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context,\
> - &@R_DoneEvent, &@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "BS.CreateEvent." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,
> @R_DoneEvent ,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_NOT_FOUND]
> -RecordAssertion $assert
> $Ip6ConfigUnregisterDataNotifyConf2AssertionGuid001 \
> - "Ip6Config.UnregisterDataNotify - Unregister notification event with
> the event not registered." \
> - "ReturnStatus - $R_Status, ExpectedStatus -
> $EFI_NOT_FOUND"
> -
> -#
> -# Clean up
> -#
> -BS->CloseEvent {@R_DoneEvent,&@R_Status}
> -GetAck
> -
> -EndScope _IP6CONFIG_UNREGISTERDATANOTIFY_CONF2_CASE1
> -
> +#
> +# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
> +# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
> +#
> +# This program and the accompanying materials
> +# are licensed and made available under the terms and conditions of the BSD
> License
> +# which accompanies this distribution. The full text of the license may be
> found at
> +# http://opensource.org/licenses/bsd-license.php
> +#
> +# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS"
> BASIS,
> +# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER
> EXPRESS OR IMPLIED.
> +#
> +################################################################
> ################
> +CaseLevel CONFORMANCE
> +CaseAttribute AUTO
> +CaseVerboseLevel DEFAULT
> +set reportfile report.csv
> +
> +#
> +# test case Name, category, description, GUID...
> +#
> +CaseGuid 9CE66A42-FADC-4d44-B577-B58CED8E984B
> +CaseName UnregisterDataNotify.Conf2.Case1
> +CaseCategory IP6Config
> +CaseDescription {UnregisterDataNotify must not succeed when then event has
> not been registered for the data type ever.}
> +
> +################################################################
> ################
> +Include IP6Config/Include/Ip6Config.inc.tcl
> +
> +
> +#
> +# Begin log ...
> +#
> +BeginLog
> +
> +#
> +# BeginScope
> +#
> +BeginScope _IP6CONFIG_UNREGISTERDATANOTIFY_CONF2_CASE1
> +
> +#
> +# Parameter Definition
> +# R_ represents "Remote EFI Side Parameter"
> +# L_ represents "Local ENTS Side Parameter"
> +#
> +UINTN R_Status
> +UINTN R_Context
> +UINTN R_DoneEvent
> +UINTN R_Ip6ConfigDataSize
> +UINT32 R_Ip6ConfigDataType
> +
> +#
> +# Check Point: Call Ip6Config->UnregisterDataNotify with the event not
> registered
> +#
> +
> +SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
> +SetVar R_Ip6ConfigDataSize [Sizeof EFI_IP6_CONFIG_MANUAL_ADDRESS]
> +
> +SetVar R_Context 0
> +BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1,
> &@R_Context,\
> + &@R_DoneEvent, &@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "BS.CreateEvent." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,
> @R_DoneEvent ,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_NOT_FOUND]
> +RecordAssertion $assert
> $Ip6ConfigUnregisterDataNotifyConf2AssertionGuid001 \
> + "Ip6Config.UnregisterDataNotify - Unregister notification event with
> the event not registered." \
> + "ReturnStatus - $R_Status, ExpectedStatus -
> $EFI_NOT_FOUND"
> +
> +#
> +# Clean up
> +#
> +BS->CloseEvent {@R_DoneEvent,&@R_Status}
> +GetAck
> +
> +EndScope _IP6CONFIG_UNREGISTERDATANOTIFY_CONF2_CASE1
> +
> EndLog
> \ No newline at end of file
> diff --git a/uefi-
> sct/EMS/Bin/TestCase/IP6Config/UnregisterDataNotify.Conf2.Case2.tcl b/uefi-
> sct/EMS/Bin/TestCase/IP6Config/UnregisterDataNotify.Conf2.Case2.tcl
> index 5608dbe..e56d26a 100644
> --- a/uefi-
> sct/EMS/Bin/TestCase/IP6Config/UnregisterDataNotify.Conf2.Case2.tcl
> +++ b/uefi-
> sct/EMS/Bin/TestCase/IP6Config/UnregisterDataNotify.Conf2.Case2.tcl
> @@ -1,99 +1,99 @@
> -#
> -# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
> -# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
> -#
> -# This program and the accompanying materials
> -# are licensed and made available under the terms and conditions of the BSD
> License
> -# which accompanies this distribution. The full text of the license may be
> found at
> -# http://opensource.org/licenses/bsd-license.php
> -#
> -# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS"
> BASIS,
> -# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER
> EXPRESS OR IMPLIED.
> -#
> -
> #################################################################
> ###############
> -CaseLevel CONFORMANCE
> -CaseAttribute AUTO
> -CaseVerboseLevel DEFAULT
> -set reportfile report.csv
> -
> -#
> -# test case Name, category, description, GUID...
> -#
> -CaseGuid EB679CF9-9A56-4a9f-B5CF-2D845B044560
> -CaseName UnregisterDataNotify.Conf2.Case2
> -CaseCategory IP6Config
> -CaseDescription {UnregisterDataNotify must not succeed when the event was
> registered and then unregistered for the data type.}
> -
> -
> #################################################################
> ###############
> -Include IP6Config/Include/Ip6Config.inc.tcl
> -
> -
> -#
> -# Begin log ...
> -#
> -BeginLog
> -
> -#
> -# BeginScope
> -#
> -BeginScope _IP6CONFIG_UNREGISTERDATANOTIFY_CONF2_CASE2
> -
> -#
> -# Parameter Definition
> -# R_ represents "Remote EFI Side Parameter"
> -# L_ represents "Local ENTS Side Parameter"
> -#
> -UINTN R_Status
> -UINTN R_Context
> -UINTN R_DoneEvent
> -UINTN R_Ip6ConfigDataSize
> -UINT32 R_Ip6ConfigDataType
> -
> -#
> -# Check Point: Register event for Datatype - ManualAddress and then unregister
> it
> -#
> -SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
> -SetVar R_Ip6ConfigDataSize [Sizeof EFI_IP6_CONFIG_MANUAL_ADDRESS]
> -
> -SetVar R_Context 0
> -BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context,\
> - &@R_DoneEvent, &@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "BS.CreateEvent." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -Ip6Config->RegisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.RegisterDataNotify - Register notification event for
> configuration." \
> - "ReturnStatus - $R_Status, ExpectedStatus -
> $EFI_SUCCESS"
> -
> -Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,
> @R_DoneEvent ,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.UnregisterDataNotify - Unregister notification event with
> correct parameters." \
> - "ReturnStatus - $R_Status, ExpectedStatus -
> $EFI_SUCCESS"
> -
> -#
> -# Check Point: Unregister the event again
> -#
> -Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,
> @R_DoneEvent ,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_NOT_FOUND]
> -RecordAssertion $assert
> $Ip6ConfigUnregisterDataNotifyConf2AssertionGuid002 \
> - "Ip6Config.UnregisterDataNotify - Unregister notification event with
> the event has been unregistered." \
> - "ReturnStatus - $R_Status, ExpectedStatus -
> $EFI_NOT_FOUND"
> -
> -#
> -# Clean up
> -#
> -BS->CloseEvent {@R_DoneEvent,&@R_Status}
> -GetAck
> -
> -EndScope _IP6CONFIG_UNREGISTERDATANOTIFY_CONF2_CASE2
> -
> +#
> +# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
> +# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
> +#
> +# This program and the accompanying materials
> +# are licensed and made available under the terms and conditions of the BSD
> License
> +# which accompanies this distribution. The full text of the license may be
> found at
> +# http://opensource.org/licenses/bsd-license.php
> +#
> +# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS"
> BASIS,
> +# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER
> EXPRESS OR IMPLIED.
> +#
> +################################################################
> ################
> +CaseLevel CONFORMANCE
> +CaseAttribute AUTO
> +CaseVerboseLevel DEFAULT
> +set reportfile report.csv
> +
> +#
> +# test case Name, category, description, GUID...
> +#
> +CaseGuid EB679CF9-9A56-4a9f-B5CF-2D845B044560
> +CaseName UnregisterDataNotify.Conf2.Case2
> +CaseCategory IP6Config
> +CaseDescription {UnregisterDataNotify must not succeed when the event was
> registered and then unregistered for the data type.}
> +
> +################################################################
> ################
> +Include IP6Config/Include/Ip6Config.inc.tcl
> +
> +
> +#
> +# Begin log ...
> +#
> +BeginLog
> +
> +#
> +# BeginScope
> +#
> +BeginScope _IP6CONFIG_UNREGISTERDATANOTIFY_CONF2_CASE2
> +
> +#
> +# Parameter Definition
> +# R_ represents "Remote EFI Side Parameter"
> +# L_ represents "Local ENTS Side Parameter"
> +#
> +UINTN R_Status
> +UINTN R_Context
> +UINTN R_DoneEvent
> +UINTN R_Ip6ConfigDataSize
> +UINT32 R_Ip6ConfigDataType
> +
> +#
> +# Check Point: Register event for Datatype - ManualAddress and then
> unregister it
> +#
> +SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
> +SetVar R_Ip6ConfigDataSize [Sizeof EFI_IP6_CONFIG_MANUAL_ADDRESS]
> +
> +SetVar R_Context 0
> +BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1,
> &@R_Context,\
> + &@R_DoneEvent, &@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "BS.CreateEvent." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +Ip6Config->RegisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.RegisterDataNotify - Register notification event for
> configuration." \
> + "ReturnStatus - $R_Status, ExpectedStatus -
> $EFI_SUCCESS"
> +
> +Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,
> @R_DoneEvent ,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.UnregisterDataNotify - Unregister notification event with
> correct parameters." \
> + "ReturnStatus - $R_Status, ExpectedStatus -
> $EFI_SUCCESS"
> +
> +#
> +# Check Point: Unregister the event again
> +#
> +Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,
> @R_DoneEvent ,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_NOT_FOUND]
> +RecordAssertion $assert
> $Ip6ConfigUnregisterDataNotifyConf2AssertionGuid002 \
> + "Ip6Config.UnregisterDataNotify - Unregister notification event with
> the event has been unregistered." \
> + "ReturnStatus - $R_Status, ExpectedStatus -
> $EFI_NOT_FOUND"
> +
> +#
> +# Clean up
> +#
> +BS->CloseEvent {@R_DoneEvent,&@R_Status}
> +GetAck
> +
> +EndScope _IP6CONFIG_UNREGISTERDATANOTIFY_CONF2_CASE2
> +
> EndLog
> \ No newline at end of file
> diff --git a/uefi-
> sct/EMS/Bin/TestCase/IP6Config/UnregisterDataNotify.Func1.Case1.tcl b/uefi-
> sct/EMS/Bin/TestCase/IP6Config/UnregisterDataNotify.Func1.Case1.tcl
> index 5b88510..6315fa7 100644
> --- a/uefi-
> sct/EMS/Bin/TestCase/IP6Config/UnregisterDataNotify.Func1.Case1.tcl
> +++ b/uefi-
> sct/EMS/Bin/TestCase/IP6Config/UnregisterDataNotify.Func1.Case1.tcl
> @@ -1,98 +1,98 @@
> -#
> -# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
> -# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
> -#
> -# This program and the accompanying materials
> -# are licensed and made available under the terms and conditions of the BSD
> License
> -# which accompanies this distribution. The full text of the license may be
> found at
> -# http://opensource.org/licenses/bsd-license.php
> -#
> -# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS"
> BASIS,
> -# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER
> EXPRESS OR IMPLIED.
> -#
> -
> #################################################################
> ###############
> -CaseLevel FUNCTION
> -CaseAttribute AUTO
> -CaseVerboseLevel DEFAULT
> -set reportfile report.csv
> -
> -#
> -# test case Name, category, description, GUID...
> -#
> -CaseGuid 769658B4-3397-4367-8E10-C4513407FFB8
> -CaseName UnregisterDataNotify.Func1.Case1
> -CaseCategory IP6Config
> -CaseDescription {UnregisterDataNotify must succeed with valid parameters
> when handling signal datatype.}
> -
> -
> #################################################################
> ###############
> -Include IP6Config/Include/Ip6Config.inc.tcl
> -
> -
> -#
> -# Begin log ...
> -#
> -BeginLog
> -
> -#
> -# BeginScope
> -#
> -BeginScope _IP6CONFIG_UNREGISTERDATANOTIFY_FUNC1_CASE1
> -
> -#
> -# Parameter Definition
> -# R_ represents "Remote EFI Side Parameter"
> -# L_ represents "Local ENTS Side Parameter"
> -#
> -UINTN R_Status
> -UINTN R_Context
> -UINTN R_DoneEvent
> -UINTN R_Ip6ConfigDataSize
> -UINT32 R_Ip6ConfigDataType
> -EFI_IP6_CONFIG_INTERFACE_INFO R_Ip6ConfigInterfaceInfo
> -EFI_IP6_CONFIG_INTERFACE_ID R_Ip6ConfigInterfaceId
> -UINT32 R_Ip6ConfigPolicy
> -EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS R_Ip6ConfigDadTransmits
> -
> -#
> -# Create Event and RegisterDataNotify
> -#
> -SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> -SetVar R_Ip6ConfigDataSize [Sizeof UINT32]
> -SetVar R_Ip6ConfigPolicy $IP6CP(Manual)
> -
> -SetVar R_Context 0
> -BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context,\
> - &@R_DoneEvent, &@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "BS.CreateEvent." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType,
> @R_DoneEvent ,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "IfConfig6.RegisterDataNotify() with valid parameter."
> \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -#
> -# Check Point : Call Ip6Config->UnregisterDataNotify with valid parameter
> -#
> -SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> -Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert
> $Ip6ConfigUnregisterDataNotifyFunc1AssertionGuid001 \
> - "Ip6Config.UnregisterDataNotify - Unregister notification event for
> configuration." \
> - "ReturnStatus - $R_Status, ExpectedStatus -
> $EFI_SUCCESS"
> -
> -#
> -# Close event
> -#
> -BS->CloseEvent {@R_DoneEvent,&@R_Status}
> -GetAck
> -
> -EndScope _IP6CONFIG_UNREGISTERDATANOTIFY_FUNC1_CASE1
> -
> +#
> +# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
> +# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
> +#
> +# This program and the accompanying materials
> +# are licensed and made available under the terms and conditions of the BSD
> License
> +# which accompanies this distribution. The full text of the license may be
> found at
> +# http://opensource.org/licenses/bsd-license.php
> +#
> +# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS"
> BASIS,
> +# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER
> EXPRESS OR IMPLIED.
> +#
> +################################################################
> ################
> +CaseLevel FUNCTION
> +CaseAttribute AUTO
> +CaseVerboseLevel DEFAULT
> +set reportfile report.csv
> +
> +#
> +# test case Name, category, description, GUID...
> +#
> +CaseGuid 769658B4-3397-4367-8E10-C4513407FFB8
> +CaseName UnregisterDataNotify.Func1.Case1
> +CaseCategory IP6Config
> +CaseDescription {UnregisterDataNotify must succeed with valid parameters
> when handling signal datatype.}
> +
> +################################################################
> ################
> +Include IP6Config/Include/Ip6Config.inc.tcl
> +
> +
> +#
> +# Begin log ...
> +#
> +BeginLog
> +
> +#
> +# BeginScope
> +#
> +BeginScope _IP6CONFIG_UNREGISTERDATANOTIFY_FUNC1_CASE1
> +
> +#
> +# Parameter Definition
> +# R_ represents "Remote EFI Side Parameter"
> +# L_ represents "Local ENTS Side Parameter"
> +#
> +UINTN R_Status
> +UINTN R_Context
> +UINTN R_DoneEvent
> +UINTN R_Ip6ConfigDataSize
> +UINT32 R_Ip6ConfigDataType
> +EFI_IP6_CONFIG_INTERFACE_INFO R_Ip6ConfigInterfaceInfo
> +EFI_IP6_CONFIG_INTERFACE_ID R_Ip6ConfigInterfaceId
> +UINT32 R_Ip6ConfigPolicy
> +EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS
> R_Ip6ConfigDadTransmits
> +
> +#
> +# Create Event and RegisterDataNotify
> +#
> +SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> +SetVar R_Ip6ConfigDataSize [Sizeof UINT32]
> +SetVar R_Ip6ConfigPolicy $IP6CP(Manual)
> +
> +SetVar R_Context 0
> +BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1,
> &@R_Context,\
> + &@R_DoneEvent, &@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "BS.CreateEvent." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType,
> @R_DoneEvent ,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "IfConfig6.RegisterDataNotify() with valid parameter."
> \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +#
> +# Check Point : Call Ip6Config->UnregisterDataNotify with valid parameter
> +#
> +SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> +Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert
> $Ip6ConfigUnregisterDataNotifyFunc1AssertionGuid001 \
> + "Ip6Config.UnregisterDataNotify - Unregister notification event for
> configuration." \
> + "ReturnStatus - $R_Status, ExpectedStatus -
> $EFI_SUCCESS"
> +
> +#
> +# Close event
> +#
> +BS->CloseEvent {@R_DoneEvent,&@R_Status}
> +GetAck
> +
> +EndScope _IP6CONFIG_UNREGISTERDATANOTIFY_FUNC1_CASE1
> +
> EndLog
> \ No newline at end of file
> diff --git a/uefi-
> sct/EMS/Bin/TestCase/IP6Config/UnregisterDataNotify.Func1.Case2.tcl b/uefi-
> sct/EMS/Bin/TestCase/IP6Config/UnregisterDataNotify.Func1.Case2.tcl
> index 9f30136..cf1a374 100644
> --- a/uefi-
> sct/EMS/Bin/TestCase/IP6Config/UnregisterDataNotify.Func1.Case2.tcl
> +++ b/uefi-
> sct/EMS/Bin/TestCase/IP6Config/UnregisterDataNotify.Func1.Case2.tcl
> @@ -1,237 +1,237 @@
> -#
> -# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
> -# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
> -#
> -# This program and the accompanying materials
> -# are licensed and made available under the terms and conditions of the BSD
> License
> -# which accompanies this distribution. The full text of the license may be
> found at
> -# http://opensource.org/licenses/bsd-license.php
> -#
> -# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS"
> BASIS,
> -# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER
> EXPRESS OR IMPLIED.
> -#
> -
> #################################################################
> ###############
> -CaseLevel FUNCTION
> -CaseAttribute AUTO
> -CaseVerboseLevel DEFAULT
> -set reportfile report.csv
> -
> -#
> -# test case Name, category, description, GUID...
> -#
> -CaseGuid C206AA15-2F53-4860-BD78-453C4EA463B6
> -CaseName UnregisterDataNotify.Func1.Case2
> -CaseCategory IP6Config
> -CaseDescription {UnregisterDataNotify must succeed with valid parameters
> when handling multiple datatype.}
> -
> -
> #################################################################
> ###############
> -Include IP6Config/Include/Ip6Config.inc.tcl
> -
> -
> -#
> -# Begin log ...
> -#
> -BeginLog
> -
> -#
> -# BeginScope
> -#
> -BeginScope _IP6CONFIG_UNREGISTERDATANOTIFY_FUNC1_CASE2
> -
> -#
> -# Parameter Definition
> -# R_ represents "Remote EFI Side Parameter"
> -# L_ represents "Local ENTS Side Parameter"
> -#
> -UINTN R_Status
> -UINTN R_Context
> -UINTN R_DoneEvent
> -UINTN R_Ip6ConfigDataSize
> -UINT32 R_Ip6ConfigDataType
> -EFI_IP6_CONFIG_INTERFACE_INFO R_Ip6ConfigInterfaceInfo
> -EFI_IP6_CONFIG_INTERFACE_ID R_Ip6ConfigInterfaceId
> -UINT32 R_Ip6ConfigPolicy
> -EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS R_Ip6ConfigDadTransmits
> -
> -#
> -# Check Point: Create Event and register it with data type [Policy] and
> [DadXmits]
> -#
> -SetVar R_Context 0
> -BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context,\
> - &@R_DoneEvent, &@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "BS.CreateEvent." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> -SetVar R_Ip6ConfigDataSize [Sizeof UINT32]
> -SetVar R_Ip6ConfigPolicy $IP6CP(Manual)
> -
> -Ip6Config->RegisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.RegisterDataNotify - Register notification event for
> configuration." \
> - "ReturnStatus - $R_Status, ExpectedStatus -
> $EFI_SUCCESS"
> -
> -SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> -SetVar R_Ip6ConfigDataSize [Sizeof
> EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS]
> -SetVar R_Ip6ConfigDadTransmits.DupAddrDetectTransmits 3
> -
> -Ip6Config->RegisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.RegisterDataNotify - Register notification event for
> configuration." \
> - "ReturnStatus - $R_Status, ExpectedStatus -
> $EFI_SUCCESS"
> -
> -#
> -# Check Point: Unregister the event on Datatype [Policy]
> -#
> -SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> -SetVar R_Ip6ConfigDataSize [Sizeof UINT32]
> -SetVar R_Ip6ConfigPolicy $IP6CP(Manual)
> -
> -Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert
> $Ip6ConfigUnregisterDataNotifyFunc1AssertionGuid002 \
> - "Ip6Config.UnregisterDataNotify - Unregister notification event for
> Datatype - Policy." \
> - "ReturnStatus - $R_Status, ExpectedStatus -
> $EFI_SUCCESS"
> -
> -#
> -# Check Point: Call Ip6Cofnig->SetData to set [Policy] and check whether the
> event is signaled.
> -#
> -SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> -SetVar R_Ip6ConfigDataSize [Sizeof UINT32]
> -SetVar R_Ip6ConfigPolicy $IP6CP(Manual)
> -
> -GetVar R_Context
> -set L_Context1 $R_Context
> -set L_Context2 $L_Context1
> -
> -Ip6Config->SetData
> "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_S
> tatus"
> -GetAck
> -GetVar R_Status
> -if { $R_Status == $EFI_SUCCESS } {
> - Stall 5
> - GetVar R_Context
> - if { $R_Context == $L_Context2 } {
> - set assert pass
> - } else {
> - set assert fail
> - }
> - RecordAssertion $assert $Ip6ConfigRegisterDataNotifyFunc1AssertionGuid003
> \
> - "Ip6Config.UnregisterDataNotify - Event should not be signaled for
> DataType - Policy."
> -} else {
> - set assert fail
> -
> - RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.SetData - Call SetData to set manual policy." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> - SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> - Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - EndScope _IP6CONFIG_UNREGISTERDATANOTIFY_FUNC1_CASE2
> - EndLog
> - return
> -}
> -
> -#
> -# Check Point: Call Ip6Config->SetData to set [DadXmits] and check whether
> the event is signaled.
> -#
> -SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> -SetVar R_Ip6ConfigDataSize [Sizeof
> EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS]
> -SetVar R_Ip6ConfigDadTransmits.DupAddrDetectTransmits 3
> -
> -GetVar R_Context
> -set L_Context1 $R_Context
> -set L_Context2 [expr { $L_Context1 + 1 }]
> -
> -Ip6Config->SetData
> "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigDadTransmits,
> &@R_Status"
> -GetAck
> -GetVar R_Status
> -
> -if { $R_Status == $EFI_SUCCESS } {
> - set assert pass
> - RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.SetData - Call SetData to set DadXmits." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -} elseif { $R_Status == $EFI_NOT_READY } {
> - set i 0
> - set L_TimeOut 30
> - while { 1 > 0 } {
> - GetVar R_Context
> - if { $R_Context == $L_Context2 } {
> - break
> - } elseif { $i == $L_TimeOut } {
> - set assert fail
> - RecordAssertion $assert $GenericAssertionGuid \
> - "SetData failed.(event hasn't been signaled before TIMEOUT)." \
> - "TIMEOUT value is $L_TimeOut (sec), "
> -
> - SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> - Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - SetVar R_Ip6ConfigDataType
> $IP6CDT(DupAddrDetectTransmits)
> - Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - EndScope
> _IP6CONFIG_UNREGISTERDATANOTIFY_FUNC1_CASE2
> - EndLog
> - return
> - }
> - incr i
> - Stall 1
> - }
> -} else {
> - set assert fail
> - RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.SetData - Call SetData to set DadXmits." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> - SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> - Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> - Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - EndScope _IP6CONFIG_UNREGISTERDATANOTIFY_FUNC1_CASE2
> - EndLog
> - return
> -}
> -
> -GetVar R_Context
> -if { $R_Context == $L_Context2 } {
> - set assert pass
> -} else {
> - set assert fail
> -}
> -RecordAssertion $assert $Ip6ConfigRegisterDataNotifyFunc1AssertionGuid004
> \
> - "Ip6Config.RegisterDataNotify - Event should be signaled for DataType
> - DadXmits."
> -
> -#
> -# Clean up
> -#
> -SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> -Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.UnregisterDataNotify - Unregister notification event for
> configuration." \
> - "ReturnStatus - $R_Status, ExpectedStatus -
> $EFI_SUCCESS"
> -
> -BS->CloseEvent {@R_DoneEvent,&@R_Status}
> -GetAck
> -
> -EndScope _IP6CONFIG_UNREGISTERDATANOTIFY_FUNC1_CASE2
> -
> +#
> +# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
> +# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
> +#
> +# This program and the accompanying materials
> +# are licensed and made available under the terms and conditions of the BSD
> License
> +# which accompanies this distribution. The full text of the license may be
> found at
> +# http://opensource.org/licenses/bsd-license.php
> +#
> +# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS"
> BASIS,
> +# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER
> EXPRESS OR IMPLIED.
> +#
> +################################################################
> ################
> +CaseLevel FUNCTION
> +CaseAttribute AUTO
> +CaseVerboseLevel DEFAULT
> +set reportfile report.csv
> +
> +#
> +# test case Name, category, description, GUID...
> +#
> +CaseGuid C206AA15-2F53-4860-BD78-453C4EA463B6
> +CaseName UnregisterDataNotify.Func1.Case2
> +CaseCategory IP6Config
> +CaseDescription {UnregisterDataNotify must succeed with valid parameters
> when handling multiple datatype.}
> +
> +################################################################
> ################
> +Include IP6Config/Include/Ip6Config.inc.tcl
> +
> +
> +#
> +# Begin log ...
> +#
> +BeginLog
> +
> +#
> +# BeginScope
> +#
> +BeginScope _IP6CONFIG_UNREGISTERDATANOTIFY_FUNC1_CASE2
> +
> +#
> +# Parameter Definition
> +# R_ represents "Remote EFI Side Parameter"
> +# L_ represents "Local ENTS Side Parameter"
> +#
> +UINTN R_Status
> +UINTN R_Context
> +UINTN R_DoneEvent
> +UINTN R_Ip6ConfigDataSize
> +UINT32 R_Ip6ConfigDataType
> +EFI_IP6_CONFIG_INTERFACE_INFO R_Ip6ConfigInterfaceInfo
> +EFI_IP6_CONFIG_INTERFACE_ID R_Ip6ConfigInterfaceId
> +UINT32 R_Ip6ConfigPolicy
> +EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS
> R_Ip6ConfigDadTransmits
> +
> +#
> +# Check Point: Create Event and register it with data type [Policy] and
> [DadXmits]
> +#
> +SetVar R_Context 0
> +BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1,
> &@R_Context,\
> + &@R_DoneEvent, &@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "BS.CreateEvent." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> +SetVar R_Ip6ConfigDataSize [Sizeof UINT32]
> +SetVar R_Ip6ConfigPolicy $IP6CP(Manual)
> +
> +Ip6Config->RegisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.RegisterDataNotify - Register notification event for
> configuration." \
> + "ReturnStatus - $R_Status, ExpectedStatus -
> $EFI_SUCCESS"
> +
> +SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> +SetVar R_Ip6ConfigDataSize [Sizeof
> EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS]
> +SetVar R_Ip6ConfigDadTransmits.DupAddrDetectTransmits 3
> +
> +Ip6Config->RegisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.RegisterDataNotify - Register notification event for
> configuration." \
> + "ReturnStatus - $R_Status, ExpectedStatus -
> $EFI_SUCCESS"
> +
> +#
> +# Check Point: Unregister the event on Datatype [Policy]
> +#
> +SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> +SetVar R_Ip6ConfigDataSize [Sizeof UINT32]
> +SetVar R_Ip6ConfigPolicy $IP6CP(Manual)
> +
> +Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert
> $Ip6ConfigUnregisterDataNotifyFunc1AssertionGuid002 \
> + "Ip6Config.UnregisterDataNotify - Unregister notification event for
> Datatype - Policy." \
> + "ReturnStatus - $R_Status, ExpectedStatus -
> $EFI_SUCCESS"
> +
> +#
> +# Check Point: Call Ip6Cofnig->SetData to set [Policy] and check whether the
> event is signaled.
> +#
> +SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> +SetVar R_Ip6ConfigDataSize [Sizeof UINT32]
> +SetVar R_Ip6ConfigPolicy $IP6CP(Manual)
> +
> +GetVar R_Context
> +set L_Context1 $R_Context
> +set L_Context2 $L_Context1
> +
> +Ip6Config->SetData
> "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_S
> tatus"
> +GetAck
> +GetVar R_Status
> +if { $R_Status == $EFI_SUCCESS } {
> + Stall 5
> + GetVar R_Context
> + if { $R_Context == $L_Context2 } {
> + set assert pass
> + } else {
> + set assert fail
> + }
> + RecordAssertion $assert
> $Ip6ConfigRegisterDataNotifyFunc1AssertionGuid003 \
> + "Ip6Config.UnregisterDataNotify - Event should not be signaled for
> DataType - Policy."
> +} else {
> + set assert fail
> +
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.SetData - Call SetData to set manual policy." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> + SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> + Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_UNREGISTERDATANOTIFY_FUNC1_CASE2
> + EndLog
> + return
> +}
> +
> +#
> +# Check Point: Call Ip6Config->SetData to set [DadXmits] and check whether
> the event is signaled.
> +#
> +SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> +SetVar R_Ip6ConfigDataSize [Sizeof
> EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS]
> +SetVar R_Ip6ConfigDadTransmits.DupAddrDetectTransmits 3
> +
> +GetVar R_Context
> +set L_Context1 $R_Context
> +set L_Context2 [expr { $L_Context1 + 1 }]
> +
> +Ip6Config->SetData
> "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigDadTransmits,
> &@R_Status"
> +GetAck
> +GetVar R_Status
> +
> +if { $R_Status == $EFI_SUCCESS } {
> + set assert pass
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.SetData - Call SetData to set DadXmits." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +} elseif { $R_Status == $EFI_NOT_READY } {
> + set i 0
> + set L_TimeOut 30
> + while { 1 > 0 } {
> + GetVar R_Context
> + if { $R_Context == $L_Context2 } {
> + break
> + } elseif { $i == $L_TimeOut } {
> + set assert fail
> + RecordAssertion $assert $GenericAssertionGuid \
> + "SetData failed.(event hasn't been signaled before TIMEOUT)." \
> + "TIMEOUT value is $L_TimeOut (sec), "
> +
> + SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> + Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + SetVar R_Ip6ConfigDataType
> $IP6CDT(DupAddrDetectTransmits)
> + Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope
> _IP6CONFIG_UNREGISTERDATANOTIFY_FUNC1_CASE2
> + EndLog
> + return
> + }
> + incr i
> + Stall 1
> + }
> +} else {
> + set assert fail
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.SetData - Call SetData to set DadXmits." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> + SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> + Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> + Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_UNREGISTERDATANOTIFY_FUNC1_CASE2
> + EndLog
> + return
> +}
> +
> +GetVar R_Context
> +if { $R_Context == $L_Context2 } {
> + set assert pass
> +} else {
> + set assert fail
> +}
> +RecordAssertion $assert $Ip6ConfigRegisterDataNotifyFunc1AssertionGuid004
> \
> + "Ip6Config.RegisterDataNotify - Event should be signaled for DataType
> - DadXmits."
> +
> +#
> +# Clean up
> +#
> +SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> +Ip6Config->UnregisterDataNotify
> "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.UnregisterDataNotify - Unregister notification event for
> configuration." \
> + "ReturnStatus - $R_Status, ExpectedStatus -
> $EFI_SUCCESS"
> +
> +BS->CloseEvent {@R_DoneEvent,&@R_Status}
> +GetAck
> +
> +EndScope _IP6CONFIG_UNREGISTERDATANOTIFY_FUNC1_CASE2
> +
> EndLog
> \ No newline at end of file
> --
> 2.9.0.windows.1
>
> _______________________________________________
> edk2-devel mailing list
> edk2-devel@lists.01.org
> https://lists.01.org/mailman/listinfo/edk2-devel
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2018-10-13 1:55 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2018-10-12 8:20 [edk2-test][Patch] uefi-sct/EMS:Add the checkpoint for SetData Eric Jin
2018-10-12 8:57 ` Supreeth Venkatesh
2018-10-12 17:01 ` Jin, Eric
2018-10-13 1:55 ` Wu, Jiaxin
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox