From: Leif Lindholm <leif.lindholm@linaro.org>
To: Chris Co <Christopher.Co@microsoft.com>
Cc: "edk2-devel@lists.01.org" <edk2-devel@lists.01.org>,
Ard Biesheuvel <ard.biesheuvel@linaro.org>,
Michael D Kinney <michael.d.kinney@intel.com>
Subject: Re: [PATCH edk2-platforms 07/27] Silicon/NXP: Add i.MX display library support
Date: Thu, 1 Nov 2018 18:05:13 +0000 [thread overview]
Message-ID: <20181101180513.njyuzs6qekuxvuqb@bivouac.eciton.net> (raw)
In-Reply-To: <20180921082542.35768-8-christopher.co@microsoft.com>
On Fri, Sep 21, 2018 at 08:25:58AM +0000, Chris Co wrote:
> This adds support for processing EDID data on NXP i.MX platforms.
>
> Contributed-under: TianoCore Contribution Agreement 1.1
> Signed-off-by: Christopher Co <christopher.co@microsoft.com>
> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
> Cc: Leif Lindholm <leif.lindholm@linaro.org>
> Cc: Michael D Kinney <michael.d.kinney@intel.com>
> ---
> Silicon/NXP/iMXPlatformPkg/Include/iMXDisplay.h | 114 +++++++++++++++
> Silicon/NXP/iMXPlatformPkg/Library/iMXDisplayLib/iMXDisplayLib.c | 152 ++++++++++++++++++++
> Silicon/NXP/iMXPlatformPkg/Library/iMXDisplayLib/iMXDisplayLib.inf | 31 ++++
> 3 files changed, 297 insertions(+)
>
> diff --git a/Silicon/NXP/iMXPlatformPkg/Include/iMXDisplay.h b/Silicon/NXP/iMXPlatformPkg/Include/iMXDisplay.h
> new file mode 100644
> index 000000000000..70ef8d0af97f
> --- /dev/null
> +++ b/Silicon/NXP/iMXPlatformPkg/Include/iMXDisplay.h
> @@ -0,0 +1,114 @@
> +/** @file
> +*
> +* Copyright (c) 2018 Microsoft Corporation. All rights reserved.
> +*
> +* This program and the accompanying materials
> +* are licensed and made available under the terms and conditions of the BSD License
> +* which accompanies this distribution. The full text of the license may be found at
> +* http://opensource.org/licenses/bsd-license.php
> +*
> +* THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> +* WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
> +*
> +**/
> +
> +#ifndef __IMX_DISPLAY_H__
> +#define __IMX_DISPLAY_H__
> +
> +#define EDID_MIN_SIZE 128
> +#define EDID_I2C_ADDRESS 0x50
Are all of these #defines and functions called only from within iMX
platform code?
> +
> +// The first DTD is the preferred timing, refer to 3.1 VESA EDID spec.
> +#define EDID_DTD_1_OFFSET 0x36
> +#define EDID_DTD_2_OFFSET 0x48
> +#define EDID_DTD_3_OFFSET 0x5A
> +#define EDID_DTD_4_OFFSET 0x6C
> +
> +typedef enum {
> + PIXEL_FORMAT_ARGB32,
> + PIXEL_FORMAT_BGRA32,
> +} PIXEL_FORMAT;
> +
> +typedef struct _DISPLAY_TIMING {
> + UINT32 PixelClock;
> + UINT32 HActive;
> + UINT32 HBlank;
> + UINT32 VActive;
> + UINT32 VBlank;
> + UINT32 HSync;
> + UINT32 VSync;
> + UINT32 HSyncOffset;
> + UINT32 VSyncOffset;
> + UINT32 HImageSize;
> + UINT32 VImageSize;
> + UINT32 HBorder;
> + UINT32 VBorder;
> + UINT32 EdidFlags;
> + UINT32 Flags;
> + UINT32 PixelRepetition;
> + UINT32 Bpp;
> + PIXEL_FORMAT PixelFormat;
> +} DISPLAY_TIMING, *PDISPLAY_TIMING, DTD;
> +
> +typedef struct _DETAILED_TIMING_DESCRIPTOR {
> + UINT8 PixelClock[2];
> + UINT8 HActive;
> + UINT8 HBlank;
> + UINT8 HActiveBlank;
> + UINT8 VActive;
> + UINT8 VBlank;
> + UINT8 VActiveBlank;
> + UINT8 HSyncOffset;
> + UINT8 HSyncWidth;
> + UINT8 VSyncOffsetWidth;
> + UINT8 HVOffsetWidth;
> + UINT8 HImageSize;
> + UINT8 VImageSize;
> + UINT8 HVImageSize;
> + UINT8 HBorder;
> + UINT8 VBorder;
> + UINT8 EdidFlags;
> +} DETAILED_TIMING_DESCRIPTOR, *PDETAILED_TIMING_DESCRIPTOR;
> +
> +/**
> + Convert detailed timing descriptor to display timing format
> +
> + @param[in] DTDPtr Pointer to detailed timing descriptor.
> + @param[out] DisplayTimingPtr Pointer to display timing structure.
> +
> + @retval EFI_SUCCESS Detailed timing descriptor data was converted.
> +
> +**/
> +EFI_STATUS
> +ConvertDTDToDisplayTiming (
> + IN DETAILED_TIMING_DESCRIPTOR *DTDPtr,
> + OUT DISPLAY_TIMING *DisplayTimingPtr
> + );
> +
> +/**
> + Debug dump of Display Timing structure
> +
> + @param[in] DisplayTimingNamePtr Name of display timing structure.
> + @param[in] DisplayTimingPtr Pointer to display timing structure.
> +**/
> +VOID
> +PrintDisplayTiming (
> + IN CHAR8 *DisplayTimingNamePtr,
> + IN DISPLAY_TIMING *DisplayTimingPtr
> + );
> +
> +/**
> + Check if EDID is valid
> +
> + @param[in] EdidDataPtr Pointer to EDID data.
> +
> + @retval EFI_SUCCESS EDID data is a valid EDID.
> + @retval EFI_INVALID_PARAMETER EDID data is invalid.
> +
> +**/
> +EFI_STATUS
> +ValidateEdidData (
> + IN UINT8 *EdidDataPtr
> + );
> +
> +#endif // __IMX_DISPLAY_H__
> diff --git a/Silicon/NXP/iMXPlatformPkg/Library/iMXDisplayLib/iMXDisplayLib.c b/Silicon/NXP/iMXPlatformPkg/Library/iMXDisplayLib/iMXDisplayLib.c
> new file mode 100644
> index 000000000000..9e90ece96260
> --- /dev/null
> +++ b/Silicon/NXP/iMXPlatformPkg/Library/iMXDisplayLib/iMXDisplayLib.c
> @@ -0,0 +1,152 @@
> +/** @file
> +*
> +* Copyright (c) 2018 Microsoft Corporation. All rights reserved.
> +*
> +* This program and the accompanying materials
> +* are licensed and made available under the terms and conditions of the BSD License
> +* which accompanies this distribution. The full text of the license may be found at
> +* http://opensource.org/licenses/bsd-license.php
> +*
> +* THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> +* WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
> +*
> +**/
> +
> +#include <Uefi.h>
> +
> +#include <Library/DebugLib.h>
> +
> +#include <iMXDisplay.h>
> +
> +/**
> + Convert detailed timing descriptor to display timing format
> +
> + @param[in] DTDPtr Pointer to detailed timing descriptor.
> + @param[out] DisplayTimingPtr Pointer to display timing structure.
> +
> + @retval EFI_SUCCESS Detailed timing descriptor data was converted.
> +
> +**/
> +EFI_STATUS
> +ConvertDTDToDisplayTiming (
> + IN DETAILED_TIMING_DESCRIPTOR *DTDPtr,
> + OUT DISPLAY_TIMING *DisplayTimingPtr
> + )
> +{
> + UINT32 edidPixelClock;
e -> E.
> +
> + DEBUG ((DEBUG_INFO, "++ConvertDTDToDisplayTiming()\r\n"));
Please use %a and __FUNCTION__ instead of hard-coding function name.
> + // Refer to 3.10.2 VESA EDID spec
> + edidPixelClock = (DTDPtr->PixelClock[0] | (DTDPtr->PixelClock[1] << 8));
> + DisplayTimingPtr->PixelClock = edidPixelClock * 10000;
> + DisplayTimingPtr->HActive = (DTDPtr->HActiveBlank & 0xF0);
> + DisplayTimingPtr->HActive = (DisplayTimingPtr->HActive << 4) | DTDPtr->HActive;
> + DisplayTimingPtr->HBlank = (DTDPtr->HActiveBlank & 0x0F);
> + DisplayTimingPtr->HBlank = (DisplayTimingPtr->HBlank << 8) | DTDPtr->HBlank;
> + DisplayTimingPtr->VActive = (DTDPtr->VActiveBlank & 0xF0);
> + DisplayTimingPtr->VActive = (DisplayTimingPtr->VActive << 4) | DTDPtr->VActive;
> + DisplayTimingPtr->VBlank = (DTDPtr->VActiveBlank & 0x0F);
> + DisplayTimingPtr->VBlank = (DisplayTimingPtr->VBlank << 8) | DTDPtr->VBlank;
> + DisplayTimingPtr->HSyncOffset = (DTDPtr->HVOffsetWidth & 0xC0);
> + DisplayTimingPtr->HSyncOffset = (DisplayTimingPtr->HSyncOffset << 2) |
> + DTDPtr->HSyncOffset;
> + DisplayTimingPtr->VSyncOffset = (DTDPtr->HVOffsetWidth & 0x0C);
> + DisplayTimingPtr->VSyncOffset = (DisplayTimingPtr->VSyncOffset << 2) |
> + ((DTDPtr->VSyncOffsetWidth & 0xF0) >> 4);
> + DisplayTimingPtr->HSync = (DTDPtr->HVOffsetWidth & 0x30);
> + DisplayTimingPtr->HSync = (DisplayTimingPtr->HSync << 4) | DTDPtr->HSyncWidth;
> + DisplayTimingPtr->VSync = (DTDPtr->HVOffsetWidth & 0x03);
> + DisplayTimingPtr->VSync = (DisplayTimingPtr->VSync << 4) |
> + (DTDPtr->VSyncOffsetWidth & 0x0F);
> + DisplayTimingPtr->HImageSize = ((DTDPtr->HVImageSize & 0xF0) << 4) |
> + DTDPtr->HImageSize;
> + DisplayTimingPtr->VImageSize = ((DTDPtr->HVImageSize & 0x0F) << 8) |
> + DTDPtr->VImageSize;
A lot of these above transforms are a fairly unreadable, but maybe
they need to be?
> + DisplayTimingPtr->HBorder = DTDPtr->HBorder;
> + DisplayTimingPtr->VBorder = DTDPtr->VBorder;
> + DisplayTimingPtr->EdidFlags = DTDPtr->EdidFlags;
> + DisplayTimingPtr->Flags = 0;
A #define for that 0?
> +
> + DEBUG ((DEBUG_INFO, "--ConvertDTDToDisplayTiming()=ok\r\n"));
__FUNCTION__
> + return EFI_SUCCESS;
> +}
> +
> +/**
> + Debug dump of Display Timing structure
> +
> + @param[in] DisplayTimingNamePtr Name of display timing structure.
> + @param[in] DisplayTimingPtr Pointer to display timing structure.
> +**/
> +VOID
> +PrintDisplayTiming (
> + IN CHAR8 *DisplayTimingNamePtr,
> + IN DISPLAY_TIMING *DisplayTimingPtr
> + )
> +{
> + DEBUG ((DEBUG_INFO, "**********************\n"));
> + DEBUG ((DEBUG_INFO, "%a\n", DisplayTimingNamePtr));
> + DEBUG ((DEBUG_INFO, "**********************\n"));
> + DEBUG ((DEBUG_INFO, "PixelClock %d\n", DisplayTimingPtr->PixelClock));
> + DEBUG ((DEBUG_INFO, "HActive %d\n", DisplayTimingPtr->HActive));
> + DEBUG ((DEBUG_INFO, "HBlank %d\n", DisplayTimingPtr->HBlank));
> + DEBUG ((DEBUG_INFO, "VActive %d\n", DisplayTimingPtr->VActive));
> + DEBUG ((DEBUG_INFO, "VBlank %d\n", DisplayTimingPtr->VBlank));
> + DEBUG ((DEBUG_INFO, "HSync %d\n", DisplayTimingPtr->HSync));
> + DEBUG ((DEBUG_INFO, "VSync %d\n", DisplayTimingPtr->VSync));
> + DEBUG ((DEBUG_INFO, "HSyncOffset %d\n", DisplayTimingPtr->HSyncOffset));
> + DEBUG ((DEBUG_INFO, "VSyncOffset %d\n", DisplayTimingPtr->VSyncOffset));
> + DEBUG ((DEBUG_INFO, "HBorder %d\n", DisplayTimingPtr->HBorder));
> + DEBUG ((DEBUG_INFO, "VBorder %d\n", DisplayTimingPtr->VBorder));
> + DEBUG ((DEBUG_INFO, "EdidFlags %d\n", DisplayTimingPtr->EdidFlags));
> + DEBUG ((DEBUG_INFO, "Flags %d\n", DisplayTimingPtr->Flags));
> + DEBUG ((DEBUG_INFO, "PixelRepetition %d\n", DisplayTimingPtr->PixelRepetition));
> + DEBUG ((DEBUG_INFO, "BPP %d\n", DisplayTimingPtr->Bpp));
> + DEBUG ((DEBUG_INFO, "PixelFormat %d\n", DisplayTimingPtr->PixelFormat));
> + DEBUG ((DEBUG_INFO, "**********************\n"));
> +}
> +
> +/**
> + Check if EDID is valid
> +
> + @param[in] EdidDataPtr Pointer to EDID data.
> +
> + @retval EFI_SUCCESS EDID data is a valid EDID.
> + @retval EFI_INVALID_PARAMETER EDID data is invalid.
> +
> +**/
> +EFI_STATUS
> +ValidateEdidData (
> + IN UINT8 *EdidDataPtr
> + )
> +{
> + UINT8 Checksum;
> + UINT8 Index;
> +
> + DEBUG ((DEBUG_INFO, "++ValidateEdidData()\r\n"));
__FUNCTION__
> +
> + if (EdidDataPtr[0] != 0x00 ||
> + EdidDataPtr[1] != 0xFF ||
> + EdidDataPtr[2] != 0xFF ||
> + EdidDataPtr[3] != 0xFF ||
> + EdidDataPtr[4] != 0xFF ||
> + EdidDataPtr[5] != 0xFF ||
> + EdidDataPtr[6] != 0xFF ||
> + EdidDataPtr[7] != 0x00) {
> + DEBUG ((DEBUG_ERROR, "Invalid EDID header\n"));
> + return EFI_INVALID_PARAMETER;
> + }
> +
> + // Validate EDID checksum
> + Checksum = 0;
> + for (Index = 0; Index < EDID_MIN_SIZE; Index++) {
> + Checksum += EdidDataPtr[Index];
> + }
> +
> + if (Checksum != 0) {
> + DEBUG ((DEBUG_ERROR, "Invalid EDID checksum\n"));
> + return EFI_INVALID_PARAMETER;
> + }
> +
> + DEBUG ((DEBUG_INFO, "--ValidateEdidData()=ok\r\n"));
__FUNCTION__
/
Leif
> + return EFI_SUCCESS;
> +}
> diff --git a/Silicon/NXP/iMXPlatformPkg/Library/iMXDisplayLib/iMXDisplayLib.inf b/Silicon/NXP/iMXPlatformPkg/Library/iMXDisplayLib/iMXDisplayLib.inf
> new file mode 100644
> index 000000000000..bd77d4159639
> --- /dev/null
> +++ b/Silicon/NXP/iMXPlatformPkg/Library/iMXDisplayLib/iMXDisplayLib.inf
> @@ -0,0 +1,31 @@
> +## @file
> +#
> +# Copyright (c) 2018 Microsoft Corporation. All rights reserved.
> +#
> +# This program and the accompanying materials
> +# are licensed and made available under the terms and conditions of the BSD License
> +# which accompanies this distribution. The full text of the license may be found at
> +# http://opensource.org/licenses/bsd-license.php
> +#
> +# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> +# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
> +#
> +##
> +
> +[Defines]
> + INF_VERSION = 0x0001001A
> + BASE_NAME = iMXDisplayLib
> + FILE_GUID = C0408490-F09B-4CFA-9A2F-5159F2705323
> + MODULE_TYPE = BASE
> + VERSION_STRING = 1.0
> + LIBRARY_CLASS = iMXDisplayLib
> +
> +[Packages]
> + EmbeddedPkg/EmbeddedPkg.dec
> + MdePkg/MdePkg.dec
> + Silicon/NXP/iMXPlatformPkg/iMXPlatformPkg.dec
> +
> +[LibraryClasses]
> +
> +[Sources.common]
> + iMXDisplayLib.c
> --
> 2.16.2.gvfs.1.33.gf5370f1
>
next prev parent reply other threads:[~2018-11-01 18:05 UTC|newest]
Thread overview: 75+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-09-21 8:25 [PATCH edk2-platforms 00/27] Import Hummingboard Edge platform for Windows IoT Core Chris Co
2018-09-21 8:25 ` [PATCH edk2-platforms 01/27] Platform/Microsoft: Add OpteeClientPkg dec Chris Co
2018-10-31 20:43 ` Leif Lindholm
2018-11-01 10:55 ` Sumit Garg
2018-11-02 0:41 ` Chris Co
2018-11-02 5:24 ` Sumit Garg
2018-11-02 23:55 ` Chris Co
2018-11-05 10:07 ` Sumit Garg
2018-11-06 1:53 ` Chris Co
2018-11-06 11:09 ` Sumit Garg
2018-09-21 8:25 ` [PATCH edk2-platforms 02/27] Platform/Microsoft: Add SdMmc Dxe Driver Chris Co
2018-09-21 8:25 ` [PATCH edk2-platforms 03/27] Platform/Microsoft: Add MsPkg Chris Co
2018-10-31 21:00 ` Leif Lindholm
2018-09-21 8:25 ` [PATCH edk2-platforms 04/27] Silicon/NXP: Add iMXPlatformPkg dec Chris Co
2018-09-21 8:25 ` [PATCH edk2-platforms 05/27] Silicon/NXP: Add UART library support for i.MX platforms Chris Co
2018-11-01 8:59 ` Leif Lindholm
2018-11-02 1:46 ` Chris Co
2018-09-21 8:25 ` [PATCH edk2-platforms 06/27] Silicon/NXP: Add I2C " Chris Co
2018-11-01 17:53 ` Leif Lindholm
2018-09-21 8:25 ` [PATCH edk2-platforms 07/27] Silicon/NXP: Add i.MX display library support Chris Co
2018-11-01 18:05 ` Leif Lindholm [this message]
2018-11-29 0:55 ` Chris Co
2018-09-21 8:25 ` [PATCH edk2-platforms 08/27] Silicon/NXP: Add Virtual RTC support for i.MX platform Chris Co
2018-12-15 13:26 ` Leif Lindholm
2018-09-21 8:26 ` [PATCH edk2-platforms 10/27] Silicon/NXP: Add iMX6Pkg dec Chris Co
2018-11-01 18:25 ` Leif Lindholm
2018-09-21 8:26 ` [PATCH edk2-platforms 09/27] Silicon/NXP: Add headers for SoC-specific i.MX packages to use Chris Co
2018-11-01 18:20 ` Leif Lindholm
2018-12-01 0:22 ` Chris Co
2018-12-03 9:42 ` Leif Lindholm
2018-12-04 1:44 ` Chris Co
2018-12-04 9:33 ` Ard Biesheuvel
2018-12-04 12:22 ` Leif Lindholm
2018-09-21 8:26 ` [PATCH edk2-platforms 11/27] Silicon/NXP: Add i.MX6 SoC header files Chris Co
2018-12-13 17:11 ` Leif Lindholm
2018-09-21 8:26 ` [PATCH edk2-platforms 12/27] Silicon/NXP: Add i.MX6 I/O MUX library Chris Co
2018-11-08 18:00 ` Leif Lindholm
2018-12-04 1:41 ` Chris Co
2018-09-21 8:26 ` [PATCH edk2-platforms 13/27] Silicon/NXP: Add support for iMX SDHC Chris Co
2018-12-05 10:31 ` Leif Lindholm
2018-09-21 8:26 ` [PATCH edk2-platforms 14/27] Silicon/NXP: Add i.MX6 GPT and EPIT timer headers Chris Co
2018-11-08 18:14 ` Leif Lindholm
2018-12-04 2:06 ` Chris Co
2018-12-04 12:58 ` Leif Lindholm
2018-09-21 8:26 ` [PATCH edk2-platforms 15/27] Silicon/NXP: Add i.MX6 GPT Timer library Chris Co
2018-12-13 17:26 ` Leif Lindholm
2018-09-21 8:26 ` [PATCH edk2-platforms 16/27] Silicon/NXP: Add i.MX6 Timer DXE driver Chris Co
2018-12-13 17:33 ` Leif Lindholm
2018-09-21 8:26 ` [PATCH edk2-platforms 17/27] Silicon/NXP: Add i.MX6 USB Phy Library Chris Co
2018-12-14 17:10 ` Leif Lindholm
2018-09-21 8:26 ` [PATCH edk2-platforms 18/27] Silicon/NXP: Add i.MX6 Clock Library Chris Co
2018-12-14 18:12 ` Leif Lindholm
2018-09-21 8:26 ` [PATCH edk2-platforms 20/27] Silicon/NXP: Add i.MX6 Board init library Chris Co
2018-12-14 20:12 ` Leif Lindholm
2018-09-21 8:26 ` [PATCH edk2-platforms 19/27] Silicon/NXP: Add i.MX6 ACPI tables Chris Co
2018-12-14 19:53 ` Leif Lindholm
2018-12-17 11:14 ` Ard Biesheuvel
2019-01-08 21:43 ` Chris Co
2019-01-29 14:09 ` Ard Biesheuvel
2018-09-21 8:26 ` [PATCH edk2-platforms 21/27] Silicon/NXP: Add i.MX6 PCIe DXE driver Chris Co
2018-12-14 21:59 ` Leif Lindholm
2018-09-21 8:26 ` [PATCH edk2-platforms 23/27] Silicon/NXP: Add i.MX6 Smbios Driver Chris Co
2018-12-14 23:07 ` Leif Lindholm
2018-09-21 8:26 ` [PATCH edk2-platforms 22/27] Silicon/NXP: Add i.MX6 GOP driver Chris Co
2018-12-14 22:37 ` Leif Lindholm
2018-09-21 8:26 ` [PATCH edk2-platforms 24/27] Silicon/NXP: Add i.MX6 common dsc and fdf files Chris Co
2018-12-14 23:36 ` Leif Lindholm
2018-09-21 8:26 ` [PATCH edk2-platforms 25/27] Platform/Solidrun: Add Hummingboard Peripheral Initialization Chris Co
2018-12-15 12:12 ` Leif Lindholm
2018-09-21 8:26 ` [PATCH edk2-platforms 26/27] Platform/SolidRun: Add i.MX 6Quad Hummingboard Edge ACPI tables Chris Co
2018-12-15 12:19 ` Leif Lindholm
2018-09-21 8:26 ` [PATCH edk2-platforms 27/27] Platform/Solidrun: Add i.MX 6Quad Hummingboard Edge dsc and fdf files Chris Co
2018-12-15 12:28 ` Leif Lindholm
2018-12-15 13:32 ` [PATCH edk2-platforms 00/27] Import Hummingboard Edge platform for Windows IoT Core Leif Lindholm
2018-12-19 18:28 ` Chris Co
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181101180513.njyuzs6qekuxvuqb@bivouac.eciton.net \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox