From: Ard Biesheuvel <ard.biesheuvel@linaro.org>
To: edk2-devel@lists.01.org
Cc: lersek@redhat.com, leif.lindholm@linaro.org, philmd@redhat.com,
hongbo.zhang@linaro.org,
Ard Biesheuvel <ard.biesheuvel@linaro.org>
Subject: [PATCH 2/2] ArmVirtPkg/NorFlashQemuLib: discover NOR flash banks dynamically
Date: Fri, 16 Nov 2018 16:45:24 -0800 [thread overview]
Message-ID: <20181117004524.31851-3-ard.biesheuvel@linaro.org> (raw)
In-Reply-To: <20181117004524.31851-1-ard.biesheuvel@linaro.org>
NorFlashQemuLib is one of the last remaining drivers in ArmVirtPkg
that are not based on the device tree received from QEMU.
For ArmVirtQemu, this does not really matter, given that the NOR
flash banks are always the same: the PEI code is linked to execute
in place from flash bank #0, and the fixed varstore PCDs refer to
flash bank #1 directly.
However, ArmVirtQemuKernel can execute at any offset, and flash bank
In this case, NorFlashQemuLib should not expose the first flash bank
at all.
To prevent introducing too much internal knowledge about which flash
bank is accessible under which circumstances, let's switch to using
the DTB to decide which flash banks to expose to the NOR flash driver.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
---
ArmVirtPkg/Library/NorFlashQemuLib/NorFlashQemuLib.c | 84 +++++++++++++++-----
ArmVirtPkg/Library/NorFlashQemuLib/NorFlashQemuLib.inf | 12 +++
2 files changed, 75 insertions(+), 21 deletions(-)
diff --git a/ArmVirtPkg/Library/NorFlashQemuLib/NorFlashQemuLib.c b/ArmVirtPkg/Library/NorFlashQemuLib/NorFlashQemuLib.c
index e3bbae5b06c5..dc0a15e77170 100644
--- a/ArmVirtPkg/Library/NorFlashQemuLib/NorFlashQemuLib.c
+++ b/ArmVirtPkg/Library/NorFlashQemuLib/NorFlashQemuLib.c
@@ -1,6 +1,6 @@
/** @file
- Copyright (c) 2014, Linaro Ltd. All rights reserved.<BR>
+ Copyright (c) 2014-2018, Linaro Ltd. All rights reserved.<BR>
This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
@@ -12,13 +12,16 @@
**/
+#include <Library/BaseLib.h>
+#include <Library/DebugLib.h>
#include <Library/NorFlashPlatformLib.h>
+#include <Library/UefiBootServicesTableLib.h>
+
+#include <Protocol/FdtClient.h>
#define QEMU_NOR_BLOCK_SIZE SIZE_256KB
-#define QEMU_NOR0_BASE 0x0
-#define QEMU_NOR0_SIZE SIZE_64MB
-#define QEMU_NOR1_BASE 0x04000000
-#define QEMU_NOR1_SIZE SIZE_64MB
+
+#define MAX_FLASH_BANKS 4
EFI_STATUS
NorFlashPlatformInitialization (
@@ -28,21 +31,7 @@ NorFlashPlatformInitialization (
return EFI_SUCCESS;
}
-NOR_FLASH_DESCRIPTION mNorFlashDevices[] = {
- {
- QEMU_NOR0_BASE,
- QEMU_NOR0_BASE,
- QEMU_NOR0_SIZE,
- QEMU_NOR_BLOCK_SIZE,
- {0xF9B94AE2, 0x8BA6, 0x409B, {0x9D, 0x56, 0xB9, 0xB4, 0x17, 0xF5, 0x3C, 0xB3}}
- }, {
- QEMU_NOR1_BASE,
- QEMU_NOR1_BASE,
- QEMU_NOR1_SIZE,
- QEMU_NOR_BLOCK_SIZE,
- {0x8047DB4B, 0x7E9C, 0x4C0C, {0x8E, 0xBC, 0xDF, 0xBB, 0xAA, 0xCA, 0xCE, 0x8F}}
- }
-};
+NOR_FLASH_DESCRIPTION mNorFlashDevices[MAX_FLASH_BANKS];
EFI_STATUS
NorFlashPlatformGetDevices (
@@ -50,7 +39,60 @@ NorFlashPlatformGetDevices (
OUT UINT32 *Count
)
{
+ FDT_CLIENT_PROTOCOL *FdtClient;
+ INT32 Node;
+ EFI_STATUS Status;
+ EFI_STATUS FindNodeStatus;
+ CONST UINT64 *Reg;
+ UINT32 RegSize;
+ CONST CHAR8 *NodeStatus;
+ UINTN Num;
+
+ Status = gBS->LocateProtocol (&gFdtClientProtocolGuid, NULL,
+ (VOID **)&FdtClient);
+ ASSERT_EFI_ERROR (Status);
+
+ Num = 0;
+ for (FindNodeStatus = FdtClient->FindCompatibleNode (FdtClient,
+ "cfi-flash", &Node);
+ !EFI_ERROR (FindNodeStatus);
+ FindNodeStatus = FdtClient->FindNextCompatibleNode (FdtClient,
+ "cfi-flash", Node, &Node)) {
+
+ Status = FdtClient->GetNodeProperty (FdtClient, Node, "status",
+ (CONST VOID **)&NodeStatus, NULL);
+ if (!EFI_ERROR (Status) && AsciiStrnCmp (NodeStatus, "ok", 2) != 0) {
+ continue;
+ }
+
+ Status = FdtClient->GetNodeProperty (FdtClient, Node, "reg",
+ (CONST VOID **)&Reg, &RegSize);
+ if (EFI_ERROR (Status)) {
+ DEBUG ((EFI_D_ERROR, "%a: GetNodeProperty () failed (Status == %r)\n",
+ __FUNCTION__, Status));
+ continue;
+ }
+
+ ASSERT ((RegSize % (2 * sizeof(UINT64))) == 0);
+
+ while (RegSize > 0) {
+ mNorFlashDevices[Num].DeviceBaseAddress = (UINTN)SwapBytes64 (Reg[0]);
+ mNorFlashDevices[Num].RegionBaseAddress = (UINTN)SwapBytes64 (Reg[0]);
+ mNorFlashDevices[Num].Size = (UINTN)SwapBytes64 (Reg[1]);
+ mNorFlashDevices[Num].BlockSize = QEMU_NOR_BLOCK_SIZE;
+
+ Num++;
+ Reg += 2;
+ RegSize -= 2 * sizeof(UINT64);
+
+ if (Num >= MAX_FLASH_BANKS) {
+ goto Finished;
+ }
+ }
+ }
+
+Finished:
*NorFlashDescriptions = mNorFlashDevices;
- *Count = ARRAY_SIZE (mNorFlashDevices);
+ *Count = Num;
return EFI_SUCCESS;
}
diff --git a/ArmVirtPkg/Library/NorFlashQemuLib/NorFlashQemuLib.inf b/ArmVirtPkg/Library/NorFlashQemuLib/NorFlashQemuLib.inf
index 126d1671f544..d86ff36dbd58 100644
--- a/ArmVirtPkg/Library/NorFlashQemuLib/NorFlashQemuLib.inf
+++ b/ArmVirtPkg/Library/NorFlashQemuLib/NorFlashQemuLib.inf
@@ -28,3 +28,15 @@
[Packages]
MdePkg/MdePkg.dec
ArmPlatformPkg/ArmPlatformPkg.dec
+ ArmVirtPkg/ArmVirtPkg.dec
+
+[LibraryClasses]
+ BaseLib
+ DebugLib
+ UefiBootServicesTableLib
+
+[Protocols]
+ gFdtClientProtocolGuid ## CONSUMES
+
+[Depex]
+ gFdtClientProtocolGuid
--
2.17.1
next prev parent reply other threads:[~2018-11-17 0:45 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-11-17 0:45 [PATCH 0/2] ArmPlatformPkg, ArmVirtPkg: discover NOR flash banks from DTB Ard Biesheuvel
2018-11-17 0:45 ` [PATCH 1/2] ArmPlatformPkg/NorFlashDxe: use one GUID plus index to identify flash banks Ard Biesheuvel
2018-11-19 19:05 ` Leif Lindholm
2018-11-19 19:09 ` Ard Biesheuvel
2018-11-19 19:23 ` Leif Lindholm
2018-11-19 19:16 ` Laszlo Ersek
2018-11-17 0:45 ` Ard Biesheuvel [this message]
2018-11-17 1:29 ` [PATCH 2/2] ArmVirtPkg/NorFlashQemuLib: discover NOR flash banks dynamically Ard Biesheuvel
2018-11-19 19:10 ` Leif Lindholm
2018-11-19 19:16 ` Ard Biesheuvel
2018-11-19 19:24 ` Leif Lindholm
2018-11-19 19:27 ` Ard Biesheuvel
2018-11-19 19:31 ` Leif Lindholm
2018-11-19 20:02 ` Laszlo Ersek
2018-11-19 20:24 ` Ard Biesheuvel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181117004524.31851-3-ard.biesheuvel@linaro.org \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox