* [PATCH v3 1/6] ArmPkg: Add PCDs needed for MM communication driver.
2018-10-25 7:32 [PATCH v3 0/6] ArmPkg related changes for StandaloneMM package Sughosh Ganu
@ 2018-10-25 7:32 ` Sughosh Ganu
2018-10-25 7:32 ` [PATCH v3 2/6] ArmPkg/Drivers: Add EFI_MM_COMMUNICATION_PROTOCOL DXE driver Sughosh Ganu
` (6 subsequent siblings)
7 siblings, 0 replies; 14+ messages in thread
From: Sughosh Ganu @ 2018-10-25 7:32 UTC (permalink / raw)
To: edk2-devel
From: Achin Gupta <achin.gupta@arm.com>
This patch defines PCDs to describe the base address and size of
communication buffer between normal world (uefi) and standalone MM
environment in the secure world.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sughosh Ganu <sughosh.ganu@arm.com>
---
ArmPkg/ArmPkg.dec | 3 +++
1 file changed, 3 insertions(+)
diff --git a/ArmPkg/ArmPkg.dec b/ArmPkg/ArmPkg.dec
index 84e57a0bf01c..0db7aa9d301c 100644
--- a/ArmPkg/ArmPkg.dec
+++ b/ArmPkg/ArmPkg.dec
@@ -240,6 +240,9 @@ [PcdsFixedAtBuild.common, PcdsDynamic.common, PcdsPatchableInModule.common]
gArmTokenSpaceGuid.PcdSystemMemoryBase|0|UINT64|0x00000029
gArmTokenSpaceGuid.PcdSystemMemorySize|0|UINT64|0x0000002A
+ gArmTokenSpaceGuid.PcdMmBufferBase|0|UINT64|0x00000045
+ gArmTokenSpaceGuid.PcdMmBufferSize|0|UINT64|0x00000046
+
[PcdsFixedAtBuild.common, PcdsDynamic.common]
#
# ARM Architectural Timer
--
2.7.4
^ permalink raw reply related [flat|nested] 14+ messages in thread* [PATCH v3 2/6] ArmPkg/Drivers: Add EFI_MM_COMMUNICATION_PROTOCOL DXE driver.
2018-10-25 7:32 [PATCH v3 0/6] ArmPkg related changes for StandaloneMM package Sughosh Ganu
2018-10-25 7:32 ` [PATCH v3 1/6] ArmPkg: Add PCDs needed for MM communication driver Sughosh Ganu
@ 2018-10-25 7:32 ` Sughosh Ganu
2018-11-23 18:20 ` Ard Biesheuvel
2018-10-25 7:32 ` [PATCH v3 3/6] ArmPkg/Include: Fix the SPM version SVC ID Sughosh Ganu
` (5 subsequent siblings)
7 siblings, 1 reply; 14+ messages in thread
From: Sughosh Ganu @ 2018-10-25 7:32 UTC (permalink / raw)
To: edk2-devel
From: Achin Gupta <achin.gupta@arm.com>
PI v1.5 Specification Volume 4 defines Management Mode Core Interface
and defines EFI_MM_COMMUNICATION_PROTOCOL. This protocol provides a
means of communicating between drivers outside of MM and MMI
handlers inside of MM.
This patch implements the EFI_MM_COMMUNICATION_PROTOCOL DXE runtime
driver for AARCH64 platforms. It uses SMCs allocated from the standard
SMC range defined in DEN0060A_ARM_MM_Interface_Specification.pdf
to communicate with the standalone MM environment in the secure world.
This patch also adds the MM Communication driver (.inf) file to
define entry point for this driver and other compile
related information the driver needs.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sughosh Ganu <sughosh.ganu@arm.com>
---
ArmPkg/Drivers/MmCommunicationDxe/MmCommunication.inf | 56 +++
ArmPkg/Drivers/MmCommunicationDxe/MmCommunicate.h | 28 ++
ArmPkg/Drivers/MmCommunicationDxe/MmCommunication.c | 395 ++++++++++++++++++++
3 files changed, 479 insertions(+)
diff --git a/ArmPkg/Drivers/MmCommunicationDxe/MmCommunication.inf b/ArmPkg/Drivers/MmCommunicationDxe/MmCommunication.inf
new file mode 100644
index 000000000000..88beafa39c05
--- /dev/null
+++ b/ArmPkg/Drivers/MmCommunicationDxe/MmCommunication.inf
@@ -0,0 +1,56 @@
+#/** @file
+#
+# DXE MM Communicate driver
+#
+# Copyright (c) 2016 - 2018, ARM Limited. All rights reserved.
+#
+# This program and the accompanying materials
+# are licensed and made available under the terms and conditions of the BSD License
+# which accompanies this distribution. The full text of the license may be found at
+# http://opensource.org/licenses/bsd-license.php
+#
+# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+#
+#**/
+
+[Defines]
+ INF_VERSION = 0x0001001A
+ BASE_NAME = ArmMmCommunication
+ FILE_GUID = 09EE81D3-F15E-43F4-85B4-CB9873DA5D6B
+ MODULE_TYPE = DXE_RUNTIME_DRIVER
+ VERSION_STRING = 1.0
+ ENTRY_POINT = MmCommunicationInitialize
+
+#
+# The following is for reference only and not required by
+# build tools
+#
+# VALID_ARCHITECTURES = AARCH64
+#
+
+[Sources.AARCH64]
+ MmCommunication.c
+
+[Packages]
+ ArmPkg/ArmPkg.dec
+ MdePkg/MdePkg.dec
+
+[LibraryClasses]
+ ArmLib
+ ArmSmcLib
+ BaseMemoryLib
+ DebugLib
+ DxeServicesTableLib
+ HobLib
+ UefiDriverEntryPoint
+
+[Protocols]
+ gEfiMmCommunicationProtocolGuid ## PRODUCES
+
+[Pcd.common]
+ gArmTokenSpaceGuid.PcdMmBufferBase
+ gArmTokenSpaceGuid.PcdMmBufferSize
+
+[Depex]
+ gEfiCpuArchProtocolGuid
diff --git a/ArmPkg/Drivers/MmCommunicationDxe/MmCommunicate.h b/ArmPkg/Drivers/MmCommunicationDxe/MmCommunicate.h
new file mode 100644
index 000000000000..0bf1c8d4ca0e
--- /dev/null
+++ b/ArmPkg/Drivers/MmCommunicationDxe/MmCommunicate.h
@@ -0,0 +1,28 @@
+/** @file
+
+ Copyright (c) 2016-2018, ARM Limited. All rights reserved.
+
+ This program and the accompanying materials
+ are licensed and made available under the terms and conditions of the BSD License
+ which accompanies this distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+#if !defined _MM_COMMUNICATE_H_
+#define _MM_COMMUNICATE_H_
+
+#define MM_MAJOR_VER_MASK 0xEFFF0000
+#define MM_MINOR_VER_MASK 0x0000FFFF
+#define MM_MAJOR_VER_SHIFT 16
+
+#define MM_MAJOR_VER(x) (((x) & MM_MAJOR_VER_MASK) >> MM_MAJOR_VER_SHIFT)
+#define MM_MINOR_VER(x) ((x) & MM_MINOR_VER_MASK)
+
+#define MM_CALLER_MAJOR_VER 0x1UL
+#define MM_CALLER_MINOR_VER 0x0
+
+#endif /* _MM_COMMUNICATE_H_ */
diff --git a/ArmPkg/Drivers/MmCommunicationDxe/MmCommunication.c b/ArmPkg/Drivers/MmCommunicationDxe/MmCommunication.c
new file mode 100644
index 000000000000..487db00c2a87
--- /dev/null
+++ b/ArmPkg/Drivers/MmCommunicationDxe/MmCommunication.c
@@ -0,0 +1,395 @@
+/** @file
+
+ Copyright (c) 2016-2018, ARM Limited. All rights reserved.
+
+ This program and the accompanying materials
+ are licensed and made available under the terms and conditions of the BSD License
+ which accompanies this distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+#include <Library/ArmLib.h>
+#include <Library/ArmSmcLib.h>
+#include <Library/BaseMemoryLib.h>
+#include <Library/DebugLib.h>
+#include <Library/DxeServicesTableLib.h>
+#include <Library/HobLib.h>
+#include <Library/PcdLib.h>
+#include <Library/UefiBootServicesTableLib.h>
+#include <Library/UefiRuntimeServicesTableLib.h>
+
+#include <Protocol/MmCommunication.h>
+
+#include <IndustryStandard/ArmStdSmc.h>
+
+#include "MmCommunicate.h"
+
+//
+// Address, Length of the pre-allocated buffer for communication with the secure
+// world.
+//
+STATIC ARM_MEMORY_REGION_DESCRIPTOR mNsCommBuffMemRegion;
+
+// Notification event when virtual address map is set.
+STATIC EFI_EVENT mSetVirtualAddressMapEvent;
+
+//
+// Handle to install the MM Communication Protocol
+//
+STATIC EFI_HANDLE mMmCommunicateHandle;
+
+/**
+ Communicates with a registered handler.
+
+ This function provides an interface to send and receive messages to the
+ Standalone MM environment on behalf of UEFI services. This function is part
+ of the MM Communication Protocol that may be called in physical mode prior to
+ SetVirtualAddressMap() and in virtual mode after SetVirtualAddressMap().
+
+ @param[in] This The EFI_MM_COMMUNICATION_PROTOCOL
+ instance.
+ @param[in, out] CommBuffer A pointer to the buffer to convey
+ into MMRAM.
+ @param[in, out] CommSize The size of the data buffer being
+ passed in. This is optional.
+
+ @retval EFI_SUCCESS The message was successfully posted.
+ @retval EFI_INVALID_PARAMETER The CommBuffer was NULL.
+ @retval EFI_BAD_BUFFER_SIZE The buffer size is incorrect for the MM
+ implementation. If this error is
+ returned, the MessageLength field in
+ the CommBuffer header or the integer
+ pointed by CommSize are updated to reflect
+ the maximum payload size the
+ implementation can accommodate.
+ @retval EFI_ACCESS_DENIED The CommunicateBuffer parameter
+ or CommSize parameter, if not omitted,
+ are in address range that cannot be
+ accessed by the MM environment
+**/
+STATIC
+EFI_STATUS
+EFIAPI
+MmCommunicationCommunicate (
+ IN CONST EFI_MM_COMMUNICATION_PROTOCOL *This,
+ IN OUT VOID *CommBuffer,
+ IN OUT UINTN *CommSize OPTIONAL
+ )
+{
+ EFI_MM_COMMUNICATE_HEADER *CommunicateHeader;
+ ARM_SMC_ARGS CommunicateSmcArgs;
+ EFI_STATUS Status;
+ UINTN BufferSize;
+
+ Status = EFI_ACCESS_DENIED;
+ BufferSize = 0;
+
+ ZeroMem (&CommunicateSmcArgs, sizeof (ARM_SMC_ARGS));
+
+ //
+ // Check parameters
+ //
+ if (CommBuffer == NULL) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ CommunicateHeader = CommBuffer;
+ // CommBuffer is a mandatory parameter. Hence, Rely on
+ // MessageLength + Header to ascertain the
+ // total size of the communication payload rather than
+ // rely on optional CommSize parameter
+ BufferSize = CommunicateHeader->MessageLength +
+ sizeof (CommunicateHeader->HeaderGuid) +
+ sizeof (CommunicateHeader->MessageLength);
+
+ // If the length of the CommBuffer is 0 then return the expected length.
+ if (CommSize) {
+ // This case can be used by the consumer of this driver to find out the
+ // max size that can be used for allocating CommBuffer.
+ if ((*CommSize == 0) ||
+ (*CommSize > mNsCommBuffMemRegion.Length)) {
+ *CommSize = mNsCommBuffMemRegion.Length;
+ return EFI_BAD_BUFFER_SIZE;
+ }
+ //
+ // CommSize must match MessageLength + sizeof (EFI_MM_COMMUNICATE_HEADER);
+ //
+ if (*CommSize != BufferSize) {
+ return EFI_INVALID_PARAMETER;
+ }
+ }
+
+ //
+ // If the buffer size is 0 or greater than what can be tolerated by the MM
+ // environment then return the expected size.
+ //
+ if ((BufferSize == 0) ||
+ (BufferSize > mNsCommBuffMemRegion.Length)) {
+ CommunicateHeader->MessageLength = mNsCommBuffMemRegion.Length -
+ sizeof (CommunicateHeader->HeaderGuid) -
+ sizeof (CommunicateHeader->MessageLength);
+ return EFI_BAD_BUFFER_SIZE;
+ }
+
+ // SMC Function ID
+ CommunicateSmcArgs.Arg0 = ARM_SMC_ID_MM_COMMUNICATE_AARCH64;
+
+ // Cookie
+ CommunicateSmcArgs.Arg1 = 0;
+
+ // Copy Communication Payload
+ CopyMem ((VOID *)mNsCommBuffMemRegion.VirtualBase, CommBuffer, BufferSize);
+
+ // comm_buffer_address (64-bit physical address)
+ CommunicateSmcArgs.Arg2 = (UINTN)mNsCommBuffMemRegion.PhysicalBase;
+
+ // comm_size_address (not used, indicated by setting to zero)
+ CommunicateSmcArgs.Arg3 = 0;
+
+ // Call the Standalone MM environment.
+ ArmCallSmc (&CommunicateSmcArgs);
+
+ switch (CommunicateSmcArgs.Arg0) {
+ case ARM_SMC_MM_RET_SUCCESS:
+ ZeroMem (CommBuffer, BufferSize);
+ // On successful return, the size of data being returned is inferred from
+ // MessageLength + Header.
+ CommunicateHeader = (EFI_MM_COMMUNICATE_HEADER *)mNsCommBuffMemRegion.VirtualBase;
+ BufferSize = CommunicateHeader->MessageLength +
+ sizeof (CommunicateHeader->HeaderGuid) +
+ sizeof (CommunicateHeader->MessageLength);
+
+ CopyMem (
+ CommBuffer,
+ (VOID *)mNsCommBuffMemRegion.VirtualBase,
+ BufferSize
+ );
+ Status = EFI_SUCCESS;
+ break;
+
+ case ARM_SMC_MM_RET_INVALID_PARAMS:
+ Status = EFI_INVALID_PARAMETER;
+ break;
+
+ case ARM_SMC_MM_RET_DENIED:
+ Status = EFI_ACCESS_DENIED;
+ break;
+
+ case ARM_SMC_MM_RET_NO_MEMORY:
+ // Unexpected error since the CommSize was checked for zero length
+ // prior to issuing the SMC
+ Status = EFI_OUT_OF_RESOURCES;
+ ASSERT (0);
+ break;
+
+ default:
+ Status = EFI_ACCESS_DENIED;
+ ASSERT (0);
+ }
+
+ return Status;
+}
+
+//
+// MM Communication Protocol instance
+//
+EFI_MM_COMMUNICATION_PROTOCOL mMmCommunication = {
+ MmCommunicationCommunicate
+};
+
+/**
+ Notification callback on SetVirtualAddressMap event.
+
+ This function notifies the MM communication protocol interface on
+ SetVirtualAddressMap event and converts pointers used in this driver
+ from physical to virtual address.
+
+ @param Event SetVirtualAddressMap event.
+ @param Context A context when the SetVirtualAddressMap triggered.
+
+ @retval EFI_SUCCESS The function executed successfully.
+ @retval Other Some error occurred when executing this function.
+
+**/
+STATIC
+VOID
+EFIAPI
+NotifySetVirtualAddressMap (
+ IN EFI_EVENT Event,
+ IN VOID *Context
+ )
+{
+ EFI_STATUS Status;
+
+ Status = gRT->ConvertPointer (EFI_OPTIONAL_PTR,
+ (VOID **)&mNsCommBuffMemRegion.VirtualBase
+ );
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_ERROR, "NotifySetVirtualAddressMap():"
+ " Unable to convert MM runtime pointer. Status:0x%r\n", Status));
+ }
+
+}
+
+STATIC
+EFI_STATUS
+GetMmCompatibility ()
+{
+ EFI_STATUS Status;
+ UINT32 MmVersion;
+ ARM_SMC_ARGS MmVersionArgs;
+
+ // MM_VERSION uses SMC32 calling conventions
+ MmVersionArgs.Arg0 = ARM_SMC_ID_MM_VERSION_AARCH32;
+
+ ArmCallSmc (&MmVersionArgs);
+
+ MmVersion = MmVersionArgs.Arg0;
+
+ if ((MM_MAJOR_VER(MmVersion) == MM_CALLER_MAJOR_VER) &&
+ (MM_MINOR_VER(MmVersion) >= MM_CALLER_MINOR_VER)) {
+ DEBUG ((DEBUG_INFO, "MM Version: Major=0x%x, Minor=0x%x\n",
+ MM_MAJOR_VER(MmVersion), MM_MINOR_VER(MmVersion)));
+ Status = EFI_SUCCESS;
+ } else {
+ DEBUG ((DEBUG_ERROR, "Incompatible MM Versions.\n Current Version: Major=0x%x, Minor=0x%x.\n Expected: Major=0x%x, Minor>=0x%x.\n",
+ MM_MAJOR_VER(MmVersion), MM_MINOR_VER(MmVersion), MM_CALLER_MAJOR_VER, MM_CALLER_MINOR_VER));
+ Status = EFI_UNSUPPORTED;
+ }
+
+ return Status;
+}
+
+/**
+ The Entry Point for MM Communication
+
+ This function installs the MM communication protocol interface and finds out
+ what type of buffer management will be required prior to invoking the
+ communication SMC.
+
+ @param ImageHandle The firmware allocated handle for the EFI image.
+ @param SystemTable A pointer to the EFI System Table.
+
+ @retval EFI_SUCCESS The entry point is executed successfully.
+ @retval Other Some error occurred when executing this entry point.
+
+**/
+EFI_STATUS
+EFIAPI
+MmCommunicationInitialize (
+ IN EFI_HANDLE ImageHandle,
+ IN EFI_SYSTEM_TABLE *SystemTable
+ )
+{
+ EFI_STATUS Status;
+
+ // Check if we can make the MM call
+ Status = GetMmCompatibility ();
+ if (EFI_ERROR(Status)) {
+ goto ReturnErrorStatus;
+ }
+
+ mNsCommBuffMemRegion.PhysicalBase = PcdGet64 (PcdMmBufferBase);
+ // During boot , Virtual and Physical are same
+ mNsCommBuffMemRegion.VirtualBase = mNsCommBuffMemRegion.PhysicalBase;
+ mNsCommBuffMemRegion.Length = PcdGet64 (PcdMmBufferSize);
+
+ if (mNsCommBuffMemRegion.PhysicalBase == 0) {
+ DEBUG ((DEBUG_ERROR, "MmCommunicateInitialize: "
+ "Invalid MM Buffer Base Address.\n"));
+ goto ReturnErrorStatus;
+ }
+
+ if (mNsCommBuffMemRegion.Length == 0) {
+ DEBUG ((DEBUG_ERROR, "MmCommunicateInitialize: "
+ "Maximum Buffer Size is zero.\n"));
+ goto ReturnErrorStatus;
+ }
+
+ Status = gDS->AddMemorySpace (EfiGcdMemoryTypeSystemMemory,
+ mNsCommBuffMemRegion.PhysicalBase,
+ mNsCommBuffMemRegion.Length,
+ EFI_MEMORY_WB |
+ EFI_MEMORY_XP |
+ EFI_MEMORY_RUNTIME);
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_ERROR, "MmCommunicateInitialize: "
+ "Failed to add MM-NS Buffer Memory Space\n"));
+ goto ReturnErrorStatus;
+ }
+
+ Status = gDS->SetMemorySpaceAttributes (
+ mNsCommBuffMemRegion.PhysicalBase,
+ mNsCommBuffMemRegion.Length,
+ EFI_MEMORY_WB | EFI_MEMORY_XP
+ );
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_ERROR, "MmCommunicateInitialize: "
+ "Failed to set MM-NS Buffer Memory attributes\n"));
+ goto CleanAddedMemorySpace;
+ }
+
+ Status = gBS->AllocatePages (
+ AllocateAddress,
+ EfiRuntimeServicesData,
+ EFI_SIZE_TO_PAGES (mNsCommBuffMemRegion.Length),
+ &mNsCommBuffMemRegion.PhysicalBase
+ );
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_ERROR, "MmCommunicateInitialize: "
+ "Failed to allocate MM-NS Buffer Memory Space\n"));
+ goto CleanAddedMemorySpace;
+ }
+
+ // Install the communication protocol
+ Status = gBS->InstallProtocolInterface (
+ &mMmCommunicateHandle,
+ &gEfiMmCommunicationProtocolGuid,
+ EFI_NATIVE_INTERFACE,
+ &mMmCommunication
+ );
+ if (EFI_ERROR(Status)) {
+ DEBUG ((DEBUG_ERROR, "MmCommunicationInitialize: "
+ "Failed to install MM communication protocol\n"));
+ goto CleanAllocatedPages;
+ }
+
+ // Register notification callback when virtual address is associated
+ // with the physical address.
+ // Create a Set Virtual Address Map event.
+ Status = gBS->CreateEvent (
+ EVT_SIGNAL_VIRTUAL_ADDRESS_CHANGE,
+ TPL_NOTIFY,
+ NotifySetVirtualAddressMap,
+ NULL,
+ &mSetVirtualAddressMapEvent
+ );
+ if (Status == EFI_SUCCESS) {
+ return Status;
+ }
+
+ gBS->UninstallProtocolInterface (
+ mMmCommunicateHandle,
+ &gEfiMmCommunicationProtocolGuid,
+ &mMmCommunication
+ );
+
+CleanAllocatedPages:
+ gBS->FreePages (
+ mNsCommBuffMemRegion.PhysicalBase,
+ EFI_SIZE_TO_PAGES (mNsCommBuffMemRegion.Length)
+ );
+
+CleanAddedMemorySpace:
+ gDS->RemoveMemorySpace (
+ mNsCommBuffMemRegion.PhysicalBase,
+ mNsCommBuffMemRegion.Length
+ );
+
+ReturnErrorStatus:
+ return EFI_INVALID_PARAMETER;
+}
--
2.7.4
^ permalink raw reply related [flat|nested] 14+ messages in thread* Re: [PATCH v3 2/6] ArmPkg/Drivers: Add EFI_MM_COMMUNICATION_PROTOCOL DXE driver.
2018-10-25 7:32 ` [PATCH v3 2/6] ArmPkg/Drivers: Add EFI_MM_COMMUNICATION_PROTOCOL DXE driver Sughosh Ganu
@ 2018-11-23 18:20 ` Ard Biesheuvel
0 siblings, 0 replies; 14+ messages in thread
From: Ard Biesheuvel @ 2018-11-23 18:20 UTC (permalink / raw)
To: Sughosh Ganu; +Cc: edk2-devel@lists.01.org, Achin Gupta, Leif Lindholm
Hello all,
Apologies for the delay. Some questions below:
On Thu, 25 Oct 2018 at 09:33, Sughosh Ganu <sughosh.ganu@arm.com> wrote:
>
> From: Achin Gupta <achin.gupta@arm.com>
>
> PI v1.5 Specification Volume 4 defines Management Mode Core Interface
> and defines EFI_MM_COMMUNICATION_PROTOCOL. This protocol provides a
> means of communicating between drivers outside of MM and MMI
> handlers inside of MM.
>
> This patch implements the EFI_MM_COMMUNICATION_PROTOCOL DXE runtime
> driver for AARCH64 platforms. It uses SMCs allocated from the standard
> SMC range defined in DEN0060A_ARM_MM_Interface_Specification.pdf
> to communicate with the standalone MM environment in the secure world.
>
> This patch also adds the MM Communication driver (.inf) file to
> define entry point for this driver and other compile
> related information the driver needs.
>
> Contributed-under: TianoCore Contribution Agreement 1.1
> Signed-off-by: Sughosh Ganu <sughosh.ganu@arm.com>
> ---
> ArmPkg/Drivers/MmCommunicationDxe/MmCommunication.inf | 56 +++
> ArmPkg/Drivers/MmCommunicationDxe/MmCommunicate.h | 28 ++
> ArmPkg/Drivers/MmCommunicationDxe/MmCommunication.c | 395 ++++++++++++++++++++
> 3 files changed, 479 insertions(+)
>
> diff --git a/ArmPkg/Drivers/MmCommunicationDxe/MmCommunication.inf b/ArmPkg/Drivers/MmCommunicationDxe/MmCommunication.inf
> new file mode 100644
> index 000000000000..88beafa39c05
> --- /dev/null
> +++ b/ArmPkg/Drivers/MmCommunicationDxe/MmCommunication.inf
> @@ -0,0 +1,56 @@
> +#/** @file
> +#
> +# DXE MM Communicate driver
> +#
> +# Copyright (c) 2016 - 2018, ARM Limited. All rights reserved.
> +#
> +# This program and the accompanying materials
> +# are licensed and made available under the terms and conditions of the BSD License
> +# which accompanies this distribution. The full text of the license may be found at
> +# http://opensource.org/licenses/bsd-license.php
> +#
> +# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> +# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
> +#
> +#**/
> +
> +[Defines]
> + INF_VERSION = 0x0001001A
> + BASE_NAME = ArmMmCommunication
> + FILE_GUID = 09EE81D3-F15E-43F4-85B4-CB9873DA5D6B
> + MODULE_TYPE = DXE_RUNTIME_DRIVER
> + VERSION_STRING = 1.0
> + ENTRY_POINT = MmCommunicationInitialize
> +
> +#
> +# The following is for reference only and not required by
> +# build tools
> +#
> +# VALID_ARCHITECTURES = AARCH64
> +#
> +
> +[Sources.AARCH64]
> + MmCommunication.c
> +
> +[Packages]
> + ArmPkg/ArmPkg.dec
> + MdePkg/MdePkg.dec
> +
> +[LibraryClasses]
> + ArmLib
> + ArmSmcLib
> + BaseMemoryLib
> + DebugLib
> + DxeServicesTableLib
> + HobLib
> + UefiDriverEntryPoint
> +
> +[Protocols]
> + gEfiMmCommunicationProtocolGuid ## PRODUCES
> +
> +[Pcd.common]
> + gArmTokenSpaceGuid.PcdMmBufferBase
> + gArmTokenSpaceGuid.PcdMmBufferSize
> +
> +[Depex]
> + gEfiCpuArchProtocolGuid
> diff --git a/ArmPkg/Drivers/MmCommunicationDxe/MmCommunicate.h b/ArmPkg/Drivers/MmCommunicationDxe/MmCommunicate.h
> new file mode 100644
> index 000000000000..0bf1c8d4ca0e
> --- /dev/null
> +++ b/ArmPkg/Drivers/MmCommunicationDxe/MmCommunicate.h
> @@ -0,0 +1,28 @@
> +/** @file
> +
> + Copyright (c) 2016-2018, ARM Limited. All rights reserved.
> +
> + This program and the accompanying materials
> + are licensed and made available under the terms and conditions of the BSD License
> + which accompanies this distribution. The full text of the license may be found at
> + http://opensource.org/licenses/bsd-license.php
> +
> + THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> + WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
> +
> +**/
> +
> +#if !defined _MM_COMMUNICATE_H_
> +#define _MM_COMMUNICATE_H_
> +
> +#define MM_MAJOR_VER_MASK 0xEFFF0000
> +#define MM_MINOR_VER_MASK 0x0000FFFF
> +#define MM_MAJOR_VER_SHIFT 16
> +
> +#define MM_MAJOR_VER(x) (((x) & MM_MAJOR_VER_MASK) >> MM_MAJOR_VER_SHIFT)
> +#define MM_MINOR_VER(x) ((x) & MM_MINOR_VER_MASK)
> +
> +#define MM_CALLER_MAJOR_VER 0x1UL
> +#define MM_CALLER_MINOR_VER 0x0
> +
> +#endif /* _MM_COMMUNICATE_H_ */
> diff --git a/ArmPkg/Drivers/MmCommunicationDxe/MmCommunication.c b/ArmPkg/Drivers/MmCommunicationDxe/MmCommunication.c
> new file mode 100644
> index 000000000000..487db00c2a87
> --- /dev/null
> +++ b/ArmPkg/Drivers/MmCommunicationDxe/MmCommunication.c
> @@ -0,0 +1,395 @@
> +/** @file
> +
> + Copyright (c) 2016-2018, ARM Limited. All rights reserved.
> +
> + This program and the accompanying materials
> + are licensed and made available under the terms and conditions of the BSD License
> + which accompanies this distribution. The full text of the license may be found at
> + http://opensource.org/licenses/bsd-license.php
> +
> + THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> + WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
> +
> +**/
> +
> +#include <Library/ArmLib.h>
> +#include <Library/ArmSmcLib.h>
> +#include <Library/BaseMemoryLib.h>
> +#include <Library/DebugLib.h>
> +#include <Library/DxeServicesTableLib.h>
> +#include <Library/HobLib.h>
> +#include <Library/PcdLib.h>
> +#include <Library/UefiBootServicesTableLib.h>
> +#include <Library/UefiRuntimeServicesTableLib.h>
> +
> +#include <Protocol/MmCommunication.h>
> +
> +#include <IndustryStandard/ArmStdSmc.h>
> +
> +#include "MmCommunicate.h"
> +
> +//
> +// Address, Length of the pre-allocated buffer for communication with the secure
> +// world.
> +//
> +STATIC ARM_MEMORY_REGION_DESCRIPTOR mNsCommBuffMemRegion;
> +
> +// Notification event when virtual address map is set.
> +STATIC EFI_EVENT mSetVirtualAddressMapEvent;
> +
> +//
> +// Handle to install the MM Communication Protocol
> +//
> +STATIC EFI_HANDLE mMmCommunicateHandle;
> +
> +/**
> + Communicates with a registered handler.
> +
> + This function provides an interface to send and receive messages to the
> + Standalone MM environment on behalf of UEFI services. This function is part
> + of the MM Communication Protocol that may be called in physical mode prior to
> + SetVirtualAddressMap() and in virtual mode after SetVirtualAddressMap().
> +
> + @param[in] This The EFI_MM_COMMUNICATION_PROTOCOL
> + instance.
> + @param[in, out] CommBuffer A pointer to the buffer to convey
> + into MMRAM.
> + @param[in, out] CommSize The size of the data buffer being
> + passed in. This is optional.
> +
> + @retval EFI_SUCCESS The message was successfully posted.
> + @retval EFI_INVALID_PARAMETER The CommBuffer was NULL.
> + @retval EFI_BAD_BUFFER_SIZE The buffer size is incorrect for the MM
> + implementation. If this error is
> + returned, the MessageLength field in
> + the CommBuffer header or the integer
> + pointed by CommSize are updated to reflect
> + the maximum payload size the
> + implementation can accommodate.
> + @retval EFI_ACCESS_DENIED The CommunicateBuffer parameter
> + or CommSize parameter, if not omitted,
> + are in address range that cannot be
> + accessed by the MM environment
> +**/
> +STATIC
> +EFI_STATUS
> +EFIAPI
> +MmCommunicationCommunicate (
> + IN CONST EFI_MM_COMMUNICATION_PROTOCOL *This,
> + IN OUT VOID *CommBuffer,
> + IN OUT UINTN *CommSize OPTIONAL
> + )
> +{
> + EFI_MM_COMMUNICATE_HEADER *CommunicateHeader;
> + ARM_SMC_ARGS CommunicateSmcArgs;
> + EFI_STATUS Status;
> + UINTN BufferSize;
> +
> + Status = EFI_ACCESS_DENIED;
> + BufferSize = 0;
> +
> + ZeroMem (&CommunicateSmcArgs, sizeof (ARM_SMC_ARGS));
> +
> + //
> + // Check parameters
> + //
> + if (CommBuffer == NULL) {
> + return EFI_INVALID_PARAMETER;
> + }
> +
> + CommunicateHeader = CommBuffer;
> + // CommBuffer is a mandatory parameter. Hence, Rely on
> + // MessageLength + Header to ascertain the
> + // total size of the communication payload rather than
> + // rely on optional CommSize parameter
> + BufferSize = CommunicateHeader->MessageLength +
> + sizeof (CommunicateHeader->HeaderGuid) +
> + sizeof (CommunicateHeader->MessageLength);
> +
> + // If the length of the CommBuffer is 0 then return the expected length.
> + if (CommSize) {
> + // This case can be used by the consumer of this driver to find out the
> + // max size that can be used for allocating CommBuffer.
> + if ((*CommSize == 0) ||
> + (*CommSize > mNsCommBuffMemRegion.Length)) {
> + *CommSize = mNsCommBuffMemRegion.Length;
> + return EFI_BAD_BUFFER_SIZE;
> + }
> + //
> + // CommSize must match MessageLength + sizeof (EFI_MM_COMMUNICATE_HEADER);
> + //
> + if (*CommSize != BufferSize) {
> + return EFI_INVALID_PARAMETER;
> + }
> + }
> +
> + //
> + // If the buffer size is 0 or greater than what can be tolerated by the MM
> + // environment then return the expected size.
> + //
> + if ((BufferSize == 0) ||
> + (BufferSize > mNsCommBuffMemRegion.Length)) {
> + CommunicateHeader->MessageLength = mNsCommBuffMemRegion.Length -
> + sizeof (CommunicateHeader->HeaderGuid) -
> + sizeof (CommunicateHeader->MessageLength);
> + return EFI_BAD_BUFFER_SIZE;
> + }
> +
> + // SMC Function ID
> + CommunicateSmcArgs.Arg0 = ARM_SMC_ID_MM_COMMUNICATE_AARCH64;
> +
> + // Cookie
> + CommunicateSmcArgs.Arg1 = 0;
> +
> + // Copy Communication Payload
> + CopyMem ((VOID *)mNsCommBuffMemRegion.VirtualBase, CommBuffer, BufferSize);
> +
> + // comm_buffer_address (64-bit physical address)
> + CommunicateSmcArgs.Arg2 = (UINTN)mNsCommBuffMemRegion.PhysicalBase;
> +
> + // comm_size_address (not used, indicated by setting to zero)
> + CommunicateSmcArgs.Arg3 = 0;
> +
> + // Call the Standalone MM environment.
> + ArmCallSmc (&CommunicateSmcArgs);
> +
> + switch (CommunicateSmcArgs.Arg0) {
> + case ARM_SMC_MM_RET_SUCCESS:
> + ZeroMem (CommBuffer, BufferSize);
> + // On successful return, the size of data being returned is inferred from
> + // MessageLength + Header.
> + CommunicateHeader = (EFI_MM_COMMUNICATE_HEADER *)mNsCommBuffMemRegion.VirtualBase;
> + BufferSize = CommunicateHeader->MessageLength +
> + sizeof (CommunicateHeader->HeaderGuid) +
> + sizeof (CommunicateHeader->MessageLength);
> +
> + CopyMem (
> + CommBuffer,
> + (VOID *)mNsCommBuffMemRegion.VirtualBase,
> + BufferSize
> + );
> + Status = EFI_SUCCESS;
> + break;
> +
> + case ARM_SMC_MM_RET_INVALID_PARAMS:
> + Status = EFI_INVALID_PARAMETER;
> + break;
> +
> + case ARM_SMC_MM_RET_DENIED:
> + Status = EFI_ACCESS_DENIED;
> + break;
> +
> + case ARM_SMC_MM_RET_NO_MEMORY:
> + // Unexpected error since the CommSize was checked for zero length
> + // prior to issuing the SMC
> + Status = EFI_OUT_OF_RESOURCES;
> + ASSERT (0);
> + break;
> +
> + default:
> + Status = EFI_ACCESS_DENIED;
> + ASSERT (0);
> + }
> +
> + return Status;
> +}
> +
> +//
> +// MM Communication Protocol instance
> +//
> +EFI_MM_COMMUNICATION_PROTOCOL mMmCommunication = {
> + MmCommunicationCommunicate
> +};
> +
> +/**
> + Notification callback on SetVirtualAddressMap event.
> +
> + This function notifies the MM communication protocol interface on
> + SetVirtualAddressMap event and converts pointers used in this driver
> + from physical to virtual address.
> +
> + @param Event SetVirtualAddressMap event.
> + @param Context A context when the SetVirtualAddressMap triggered.
> +
> + @retval EFI_SUCCESS The function executed successfully.
> + @retval Other Some error occurred when executing this function.
> +
> +**/
> +STATIC
> +VOID
> +EFIAPI
> +NotifySetVirtualAddressMap (
> + IN EFI_EVENT Event,
> + IN VOID *Context
> + )
> +{
> + EFI_STATUS Status;
> +
> + Status = gRT->ConvertPointer (EFI_OPTIONAL_PTR,
> + (VOID **)&mNsCommBuffMemRegion.VirtualBase
> + );
> + if (EFI_ERROR (Status)) {
> + DEBUG ((DEBUG_ERROR, "NotifySetVirtualAddressMap():"
> + " Unable to convert MM runtime pointer. Status:0x%r\n", Status));
> + }
> +
> +}
> +
> +STATIC
> +EFI_STATUS
> +GetMmCompatibility ()
> +{
> + EFI_STATUS Status;
> + UINT32 MmVersion;
> + ARM_SMC_ARGS MmVersionArgs;
> +
> + // MM_VERSION uses SMC32 calling conventions
> + MmVersionArgs.Arg0 = ARM_SMC_ID_MM_VERSION_AARCH32;
> +
> + ArmCallSmc (&MmVersionArgs);
> +
> + MmVersion = MmVersionArgs.Arg0;
> +
> + if ((MM_MAJOR_VER(MmVersion) == MM_CALLER_MAJOR_VER) &&
> + (MM_MINOR_VER(MmVersion) >= MM_CALLER_MINOR_VER)) {
> + DEBUG ((DEBUG_INFO, "MM Version: Major=0x%x, Minor=0x%x\n",
> + MM_MAJOR_VER(MmVersion), MM_MINOR_VER(MmVersion)));
> + Status = EFI_SUCCESS;
> + } else {
> + DEBUG ((DEBUG_ERROR, "Incompatible MM Versions.\n Current Version: Major=0x%x, Minor=0x%x.\n Expected: Major=0x%x, Minor>=0x%x.\n",
> + MM_MAJOR_VER(MmVersion), MM_MINOR_VER(MmVersion), MM_CALLER_MAJOR_VER, MM_CALLER_MINOR_VER));
> + Status = EFI_UNSUPPORTED;
> + }
> +
> + return Status;
> +}
> +
> +/**
> + The Entry Point for MM Communication
> +
> + This function installs the MM communication protocol interface and finds out
> + what type of buffer management will be required prior to invoking the
> + communication SMC.
> +
> + @param ImageHandle The firmware allocated handle for the EFI image.
> + @param SystemTable A pointer to the EFI System Table.
> +
> + @retval EFI_SUCCESS The entry point is executed successfully.
> + @retval Other Some error occurred when executing this entry point.
> +
> +**/
> +EFI_STATUS
> +EFIAPI
> +MmCommunicationInitialize (
> + IN EFI_HANDLE ImageHandle,
> + IN EFI_SYSTEM_TABLE *SystemTable
> + )
> +{
> + EFI_STATUS Status;
> +
> + // Check if we can make the MM call
> + Status = GetMmCompatibility ();
> + if (EFI_ERROR(Status)) {
> + goto ReturnErrorStatus;
> + }
> +
> + mNsCommBuffMemRegion.PhysicalBase = PcdGet64 (PcdMmBufferBase);
> + // During boot , Virtual and Physical are same
> + mNsCommBuffMemRegion.VirtualBase = mNsCommBuffMemRegion.PhysicalBase;
> + mNsCommBuffMemRegion.Length = PcdGet64 (PcdMmBufferSize);
> +
> + if (mNsCommBuffMemRegion.PhysicalBase == 0) {
> + DEBUG ((DEBUG_ERROR, "MmCommunicateInitialize: "
> + "Invalid MM Buffer Base Address.\n"));
> + goto ReturnErrorStatus;
> + }
> +
> + if (mNsCommBuffMemRegion.Length == 0) {
> + DEBUG ((DEBUG_ERROR, "MmCommunicateInitialize: "
> + "Maximum Buffer Size is zero.\n"));
> + goto ReturnErrorStatus;
> + }
> +
Please add ASSERT()s to these checks so the failure is more obvious
when these values are not set.
> + Status = gDS->AddMemorySpace (EfiGcdMemoryTypeSystemMemory,
> + mNsCommBuffMemRegion.PhysicalBase,
> + mNsCommBuffMemRegion.Length,
> + EFI_MEMORY_WB |
> + EFI_MEMORY_XP |
> + EFI_MEMORY_RUNTIME);
> + if (EFI_ERROR (Status)) {
> + DEBUG ((DEBUG_ERROR, "MmCommunicateInitialize: "
> + "Failed to add MM-NS Buffer Memory Space\n"));
> + goto ReturnErrorStatus;
> + }
> +
> + Status = gDS->SetMemorySpaceAttributes (
> + mNsCommBuffMemRegion.PhysicalBase,
> + mNsCommBuffMemRegion.Length,
> + EFI_MEMORY_WB | EFI_MEMORY_XP
> + );
> + if (EFI_ERROR (Status)) {
> + DEBUG ((DEBUG_ERROR, "MmCommunicateInitialize: "
> + "Failed to set MM-NS Buffer Memory attributes\n"));
> + goto CleanAddedMemorySpace;
> + }
> +
> + Status = gBS->AllocatePages (
> + AllocateAddress,
> + EfiRuntimeServicesData,
> + EFI_SIZE_TO_PAGES (mNsCommBuffMemRegion.Length),
> + &mNsCommBuffMemRegion.PhysicalBase
> + );
> + if (EFI_ERROR (Status)) {
> + DEBUG ((DEBUG_ERROR, "MmCommunicateInitialize: "
> + "Failed to allocate MM-NS Buffer Memory Space\n"));
> + goto CleanAddedMemorySpace;
> + }
> +
This is racy. If the shared memory region is at the top of DRAM. If we
get interrupted here by an event handler, any page allocation that
occurs in that context will be served from our shared memory region.
So instead, I propose that we
- Use AddMemorySpace() with EfiGcdMemoryTypeReserved,
- Add EFI_MEMORY_RUNTIME to the attributes in the
SetMemorySpaceAttributes() call
- Drop the AllocatePages() call
I checked the Linux code: it is the EFI_MEMORY_RUNTIME attribute that
decides whether a certain region is remapped for runtime (as per the
spec) so this should be safe afaict.
> + // Install the communication protocol
> + Status = gBS->InstallProtocolInterface (
> + &mMmCommunicateHandle,
> + &gEfiMmCommunicationProtocolGuid,
> + EFI_NATIVE_INTERFACE,
> + &mMmCommunication
> + );
> + if (EFI_ERROR(Status)) {
> + DEBUG ((DEBUG_ERROR, "MmCommunicationInitialize: "
> + "Failed to install MM communication protocol\n"));
> + goto CleanAllocatedPages;
> + }
> +
> + // Register notification callback when virtual address is associated
> + // with the physical address.
> + // Create a Set Virtual Address Map event.
> + Status = gBS->CreateEvent (
> + EVT_SIGNAL_VIRTUAL_ADDRESS_CHANGE,
> + TPL_NOTIFY,
> + NotifySetVirtualAddressMap,
> + NULL,
> + &mSetVirtualAddressMapEvent
> + );
> + if (Status == EFI_SUCCESS) {
> + return Status;
> + }
> +
> + gBS->UninstallProtocolInterface (
> + mMmCommunicateHandle,
> + &gEfiMmCommunicationProtocolGuid,
> + &mMmCommunication
> + );
> +
> +CleanAllocatedPages:
> + gBS->FreePages (
> + mNsCommBuffMemRegion.PhysicalBase,
> + EFI_SIZE_TO_PAGES (mNsCommBuffMemRegion.Length)
> + );
> +
> +CleanAddedMemorySpace:
> + gDS->RemoveMemorySpace (
> + mNsCommBuffMemRegion.PhysicalBase,
> + mNsCommBuffMemRegion.Length
> + );
> +
> +ReturnErrorStatus:
> + return EFI_INVALID_PARAMETER;
> +}
> --
> 2.7.4
>
^ permalink raw reply [flat|nested] 14+ messages in thread
* [PATCH v3 3/6] ArmPkg/Include: Fix the SPM version SVC ID
2018-10-25 7:32 [PATCH v3 0/6] ArmPkg related changes for StandaloneMM package Sughosh Ganu
2018-10-25 7:32 ` [PATCH v3 1/6] ArmPkg: Add PCDs needed for MM communication driver Sughosh Ganu
2018-10-25 7:32 ` [PATCH v3 2/6] ArmPkg/Drivers: Add EFI_MM_COMMUNICATION_PROTOCOL DXE driver Sughosh Ganu
@ 2018-10-25 7:32 ` Sughosh Ganu
2018-10-25 7:32 ` [PATCH v3 4/6] ArmPkg/Include: Add MM interface SVC return codes Sughosh Ganu
` (4 subsequent siblings)
7 siblings, 0 replies; 14+ messages in thread
From: Sughosh Ganu @ 2018-10-25 7:32 UTC (permalink / raw)
To: edk2-devel
The MM_VERSION SMC call uses SMC32 calling convention. Fix the macro
to reflect the correct value.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sughosh Ganu <sughosh.ganu@arm.com>
---
ArmPkg/Include/IndustryStandard/ArmMmSvc.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/ArmPkg/Include/IndustryStandard/ArmMmSvc.h b/ArmPkg/Include/IndustryStandard/ArmMmSvc.h
index 4c7b6c338627..81b4654fa5dd 100644
--- a/ArmPkg/Include/IndustryStandard/ArmMmSvc.h
+++ b/ArmPkg/Include/IndustryStandard/ArmMmSvc.h
@@ -20,7 +20,7 @@
* delegated events and request the Secure partition manager to perform
* privileged operations on its behalf.
*/
-#define ARM_SVC_ID_SPM_VERSION_AARCH64 0xC4000060
+#define ARM_SVC_ID_SPM_VERSION_AARCH32 0x84000060
#define ARM_SVC_ID_SP_EVENT_COMPLETE_AARCH64 0xC4000061
#define ARM_SVC_ID_SP_GET_MEM_ATTRIBUTES_AARCH64 0xC4000064
#define ARM_SVC_ID_SP_SET_MEM_ATTRIBUTES_AARCH64 0xC4000065
--
2.7.4
^ permalink raw reply related [flat|nested] 14+ messages in thread* [PATCH v3 4/6] ArmPkg/Include: Add MM interface SVC return codes.
2018-10-25 7:32 [PATCH v3 0/6] ArmPkg related changes for StandaloneMM package Sughosh Ganu
` (2 preceding siblings ...)
2018-10-25 7:32 ` [PATCH v3 3/6] ArmPkg/Include: Fix the SPM version SVC ID Sughosh Ganu
@ 2018-10-25 7:32 ` Sughosh Ganu
2018-10-25 7:32 ` [PATCH v3 5/6] ArmPkg/ArmMmuLib: Add MMU Library suitable for use in S-EL0 Sughosh Ganu
` (3 subsequent siblings)
7 siblings, 0 replies; 14+ messages in thread
From: Sughosh Ganu @ 2018-10-25 7:32 UTC (permalink / raw)
To: edk2-devel
From: Achin Gupta <achin.gupta@arm.com>
This patch adds the Management Mode(MM) - Secure Partition
Manager(SPM) SVC return codes.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sughosh Ganu <sughosh.ganu@arm.com>
---
ArmPkg/Include/IndustryStandard/ArmMmSvc.h | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/ArmPkg/Include/IndustryStandard/ArmMmSvc.h b/ArmPkg/Include/IndustryStandard/ArmMmSvc.h
index 81b4654fa5dd..a64b9ec23c4b 100644
--- a/ArmPkg/Include/IndustryStandard/ArmMmSvc.h
+++ b/ArmPkg/Include/IndustryStandard/ArmMmSvc.h
@@ -40,4 +40,11 @@
((((c_perm) & SET_MEM_ATTR_CODE_PERM_MASK) << SET_MEM_ATTR_CODE_PERM_SHIFT) | \
(( (d_perm) & SET_MEM_ATTR_DATA_PERM_MASK) << SET_MEM_ATTR_DATA_PERM_SHIFT))
+/* MM SVC Return error codes */
+#define ARM_SVC_SPM_RET_SUCCESS 0
+#define ARM_SVC_SPM_RET_NOT_SUPPORTED -1
+#define ARM_SVC_SPM_RET_INVALID_PARAMS -2
+#define ARM_SVC_SPM_RET_DENIED -3
+#define ARM_SVC_SPM_RET_NO_MEMORY -5
+
#endif
--
2.7.4
^ permalink raw reply related [flat|nested] 14+ messages in thread* [PATCH v3 5/6] ArmPkg/ArmMmuLib: Add MMU Library suitable for use in S-EL0.
2018-10-25 7:32 [PATCH v3 0/6] ArmPkg related changes for StandaloneMM package Sughosh Ganu
` (3 preceding siblings ...)
2018-10-25 7:32 ` [PATCH v3 4/6] ArmPkg/Include: Add MM interface SVC return codes Sughosh Ganu
@ 2018-10-25 7:32 ` Sughosh Ganu
2018-10-25 7:32 ` [PATCH v3 6/6] ArmPkg/ArmMmuLib: Add MMU library inf file " Sughosh Ganu
` (2 subsequent siblings)
7 siblings, 0 replies; 14+ messages in thread
From: Sughosh Ganu @ 2018-10-25 7:32 UTC (permalink / raw)
To: edk2-devel
From: Achin Gupta <achin.gupta@arm.com>
The Standalone MM environment runs in S-EL0 in AArch64 on ARM Standard
Platforms. Privileged firmware e.g. ARM Trusted Firmware sets up its
architectural context including the initial translation tables for the
S-EL1/EL0 translation regime. The MM environment will still request ARM
TF to change the memory attributes of memory regions during
initialization.
The Standalone MM image is a FV that encapsulates the MM foundation
and drivers. These are PE-COFF images with data and text segments.
To initialise the MM environment, Arm Trusted Firmware has to create
translation tables with sane default attributes for the memory
occupied by the FV. This library sends SVCs to ARM Trusted Firmware
to request memory permissions change for data and text segments.
This patch adds a simple MMU library suitable for execution in S-EL0 and
requesting memory permissions change operations from Arm Trusted Firmware.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sughosh Ganu <sughosh.ganu@arm.com>
---
ArmPkg/Library/ArmMmuLib/AArch64/ArmMmuStandaloneMmCoreLib.c | 204 ++++++++++++++++++++
1 file changed, 204 insertions(+)
diff --git a/ArmPkg/Library/ArmMmuLib/AArch64/ArmMmuStandaloneMmCoreLib.c b/ArmPkg/Library/ArmMmuLib/AArch64/ArmMmuStandaloneMmCoreLib.c
new file mode 100644
index 000000000000..ee0a80349051
--- /dev/null
+++ b/ArmPkg/Library/ArmMmuLib/AArch64/ArmMmuStandaloneMmCoreLib.c
@@ -0,0 +1,204 @@
+/** @file
+* File managing the MMU for ARMv8 architecture in S-EL0
+*
+* Copyright (c) 2017 - 2018, ARM Limited. All rights reserved.
+*
+* This program and the accompanying materials
+* are licensed and made available under the terms and conditions of the BSD License
+* which accompanies this distribution. The full text of the license may be found at
+* http://opensource.org/licenses/bsd-license.php
+*
+* THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+* WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+*
+**/
+
+#include <Uefi.h>
+#include <Chipset/AArch64.h>
+#include <IndustryStandard/ArmMmSvc.h>
+
+#include <Library/ArmLib.h>
+#include <Library/ArmMmuLib.h>
+#include <Library/ArmSvcLib.h>
+#include <Library/BaseLib.h>
+#include <Library/DebugLib.h>
+
+EFI_STATUS
+GetMemoryPermissions (
+ IN EFI_PHYSICAL_ADDRESS BaseAddress,
+ OUT UINT32 *MemoryAttributes
+ )
+{
+ ARM_SVC_ARGS GetMemoryPermissionsSvcArgs = {0};
+
+ GetMemoryPermissionsSvcArgs.Arg0 = ARM_SVC_ID_SP_GET_MEM_ATTRIBUTES_AARCH64;
+ GetMemoryPermissionsSvcArgs.Arg1 = BaseAddress;
+ GetMemoryPermissionsSvcArgs.Arg2 = 0;
+ GetMemoryPermissionsSvcArgs.Arg3 = 0;
+
+ ArmCallSvc (&GetMemoryPermissionsSvcArgs);
+ if (GetMemoryPermissionsSvcArgs.Arg0 == ARM_SVC_SPM_RET_INVALID_PARAMS) {
+ *MemoryAttributes = 0;
+ return EFI_INVALID_PARAMETER;
+ }
+
+ *MemoryAttributes = GetMemoryPermissionsSvcArgs.Arg0;
+ return EFI_SUCCESS;
+}
+
+EFI_STATUS
+RequestMemoryPermissionChange (
+ IN EFI_PHYSICAL_ADDRESS BaseAddress,
+ IN UINT64 Length,
+ IN UINTN Permissions
+ )
+{
+ EFI_STATUS Status;
+ ARM_SVC_ARGS ChangeMemoryPermissionsSvcArgs = {0};
+
+ ChangeMemoryPermissionsSvcArgs.Arg0 = ARM_SVC_ID_SP_SET_MEM_ATTRIBUTES_AARCH64;
+ ChangeMemoryPermissionsSvcArgs.Arg1 = BaseAddress;
+ ChangeMemoryPermissionsSvcArgs.Arg2 = EFI_SIZE_TO_PAGES(Length);
+ ChangeMemoryPermissionsSvcArgs.Arg3 = Permissions;
+
+ ArmCallSvc (&ChangeMemoryPermissionsSvcArgs);
+
+ Status = ChangeMemoryPermissionsSvcArgs.Arg0;
+
+ switch (Status) {
+ case ARM_SVC_SPM_RET_SUCCESS:
+ Status = EFI_SUCCESS;
+ break;
+
+ case ARM_SVC_SPM_RET_NOT_SUPPORTED:
+ Status = EFI_UNSUPPORTED;
+ break;
+
+ case ARM_SVC_SPM_RET_INVALID_PARAMS:
+ Status = EFI_INVALID_PARAMETER;
+ break;
+
+ case ARM_SVC_SPM_RET_DENIED:
+ Status = EFI_ACCESS_DENIED;
+ break;
+
+ case ARM_SVC_SPM_RET_NO_MEMORY:
+ Status = EFI_BAD_BUFFER_SIZE;
+ break;
+
+ default:
+ Status = EFI_ACCESS_DENIED;
+ ASSERT (0);
+ }
+
+ return Status;
+}
+
+EFI_STATUS
+ArmSetMemoryRegionNoExec (
+ IN EFI_PHYSICAL_ADDRESS BaseAddress,
+ IN UINT64 Length
+ )
+{
+ EFI_STATUS Status;
+ UINT32 MemoryAttributes;
+ UINT32 CodePermission;
+
+ Status = GetMemoryPermissions (BaseAddress, &MemoryAttributes);
+ if (Status != EFI_INVALID_PARAMETER) {
+ CodePermission = SET_MEM_ATTR_CODE_PERM_XN << SET_MEM_ATTR_CODE_PERM_SHIFT;
+ return RequestMemoryPermissionChange (
+ BaseAddress,
+ Length,
+ MemoryAttributes | CodePermission
+ );
+ }
+ return EFI_INVALID_PARAMETER;
+}
+
+EFI_STATUS
+ArmClearMemoryRegionNoExec (
+ IN EFI_PHYSICAL_ADDRESS BaseAddress,
+ IN UINT64 Length
+ )
+{
+ EFI_STATUS Status;
+ UINT32 MemoryAttributes;
+ UINT32 CodePermission;
+
+ Status = GetMemoryPermissions (BaseAddress, &MemoryAttributes);
+ if (Status != EFI_INVALID_PARAMETER) {
+ CodePermission = SET_MEM_ATTR_CODE_PERM_XN << SET_MEM_ATTR_CODE_PERM_SHIFT;
+ return RequestMemoryPermissionChange (
+ BaseAddress,
+ Length,
+ MemoryAttributes & ~CodePermission
+ );
+ }
+ return EFI_INVALID_PARAMETER;
+}
+
+EFI_STATUS
+ArmSetMemoryRegionReadOnly (
+ IN EFI_PHYSICAL_ADDRESS BaseAddress,
+ IN UINT64 Length
+ )
+{
+ EFI_STATUS Status;
+ UINT32 MemoryAttributes;
+ UINT32 DataPermission;
+
+ Status = GetMemoryPermissions (BaseAddress, &MemoryAttributes);
+ if (Status != EFI_INVALID_PARAMETER) {
+ DataPermission = SET_MEM_ATTR_DATA_PERM_RO << SET_MEM_ATTR_DATA_PERM_SHIFT;
+ return RequestMemoryPermissionChange (
+ BaseAddress,
+ Length,
+ MemoryAttributes | DataPermission
+ );
+ }
+ return EFI_INVALID_PARAMETER;
+}
+
+EFI_STATUS
+ArmClearMemoryRegionReadOnly (
+ IN EFI_PHYSICAL_ADDRESS BaseAddress,
+ IN UINT64 Length
+ )
+{
+ EFI_STATUS Status;
+ UINT32 MemoryAttributes;
+ UINT32 PermissionRequest;
+
+ Status = GetMemoryPermissions (BaseAddress, &MemoryAttributes);
+ if (Status != EFI_INVALID_PARAMETER) {
+ PermissionRequest = SET_MEM_ATTR_MAKE_PERM_REQUEST (SET_MEM_ATTR_DATA_PERM_RW, MemoryAttributes);
+ return RequestMemoryPermissionChange (
+ BaseAddress,
+ Length,
+ PermissionRequest
+ );
+ }
+ return EFI_INVALID_PARAMETER;
+}
+
+EFI_STATUS
+EFIAPI
+ArmConfigureMmu (
+ IN ARM_MEMORY_REGION_DESCRIPTOR *MemoryTable,
+ OUT VOID **TranslationTableBase OPTIONAL,
+ OUT UINTN *TranslationTableSize OPTIONAL
+ )
+{
+ return EFI_UNSUPPORTED;
+}
+
+EFI_STATUS
+EFIAPI
+ArmMmuStandaloneMmCoreLibConstructor (
+ IN EFI_HANDLE ImageHandle,
+ IN EFI_MM_SYSTEM_TABLE *MmSystemTable
+ )
+{
+ return EFI_SUCCESS;
+}
--
2.7.4
^ permalink raw reply related [flat|nested] 14+ messages in thread* [PATCH v3 6/6] ArmPkg/ArmMmuLib: Add MMU library inf file suitable for use in S-EL0.
2018-10-25 7:32 [PATCH v3 0/6] ArmPkg related changes for StandaloneMM package Sughosh Ganu
` (4 preceding siblings ...)
2018-10-25 7:32 ` [PATCH v3 5/6] ArmPkg/ArmMmuLib: Add MMU Library suitable for use in S-EL0 Sughosh Ganu
@ 2018-10-25 7:32 ` Sughosh Ganu
2018-11-23 18:28 ` Ard Biesheuvel
2018-11-19 4:48 ` [PATCH v3 0/6] ArmPkg related changes for StandaloneMM package Sughosh Ganu
2018-11-19 5:00 ` Sughosh Ganu
7 siblings, 1 reply; 14+ messages in thread
From: Sughosh Ganu @ 2018-10-25 7:32 UTC (permalink / raw)
To: edk2-devel
From: Achin Gupta <achin.gupta@arm.com>
This patch adds the definitions, sources, packages and library classes
needed to compile and link MMU Library suitable for use in S-EL0.
Currently, this is used only during the Standalone MM Core
initialization and hence defined as MM_CORE_STANDALONE Module.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sughosh Ganu <sughosh.ganu@arm.com>
---
ArmPkg/Library/ArmMmuLib/{ArmMmuPeiLib.inf => ArmMmuStandaloneMmCoreLib.inf} | 23 +++++++++-----------
1 file changed, 10 insertions(+), 13 deletions(-)
diff --git a/ArmPkg/Library/ArmMmuLib/ArmMmuPeiLib.inf b/ArmPkg/Library/ArmMmuLib/ArmMmuStandaloneMmCoreLib.inf
similarity index 51%
copy from ArmPkg/Library/ArmMmuLib/ArmMmuPeiLib.inf
copy to ArmPkg/Library/ArmMmuLib/ArmMmuStandaloneMmCoreLib.inf
index ecf13f790734..9f5593d3f6c8 100644
--- a/ArmPkg/Library/ArmMmuLib/ArmMmuPeiLib.inf
+++ b/ArmPkg/Library/ArmMmuLib/ArmMmuStandaloneMmCoreLib.inf
@@ -1,6 +1,6 @@
#/** @file
#
-# Copyright (c) 2016 Linaro Ltd. All rights reserved.
+# Copyright (c) 2017 - 2018, ARM Limited. All rights reserved.
#
# This program and the accompanying materials
# are licensed and made available under the terms and conditions of the BSD License
@@ -13,22 +13,20 @@
#**/
[Defines]
- INF_VERSION = 0x00010005
- BASE_NAME = ArmMmuPeiLib
- FILE_GUID = b50d8d53-1ad1-44ea-9e69-8c89d4a6d08b
- MODULE_TYPE = PEIM
+ INF_VERSION = 0x0001001A
+ BASE_NAME = ArmMmuStandaloneMmCoreLib
+ FILE_GUID = da8f0232-fb14-42f0-922c-63104d2c70bd
+ MODULE_TYPE = MM_CORE_STANDALONE
VERSION_STRING = 1.0
- LIBRARY_CLASS = ArmMmuLib|PEIM
- CONSTRUCTOR = ArmMmuPeiLibConstructor
+ LIBRARY_CLASS = ArmMmuStandaloneMmCoreLib|MM_CORE_STANDALONE
+ PI_SPECIFICATION_VERSION = 0x00010032
+ CONSTRUCTOR = ArmMmuStandaloneMmCoreLibConstructor
[Sources.AARCH64]
- AArch64/ArmMmuLibCore.c
- AArch64/ArmMmuPeiLibConstructor.c
- AArch64/ArmMmuLibReplaceEntry.S
+ AArch64/ArmMmuStandaloneMmCoreLib.c
[Packages]
ArmPkg/ArmPkg.dec
- EmbeddedPkg/EmbeddedPkg.dec
MdePkg/MdePkg.dec
[LibraryClasses]
@@ -36,5 +34,4 @@ [LibraryClasses]
CacheMaintenanceLib
MemoryAllocationLib
-[Pcd.AARCH64]
- gEmbeddedTokenSpaceGuid.PcdPrePiCpuMemorySize
+
--
2.7.4
^ permalink raw reply related [flat|nested] 14+ messages in thread* Re: [PATCH v3 6/6] ArmPkg/ArmMmuLib: Add MMU library inf file suitable for use in S-EL0.
2018-10-25 7:32 ` [PATCH v3 6/6] ArmPkg/ArmMmuLib: Add MMU library inf file " Sughosh Ganu
@ 2018-11-23 18:28 ` Ard Biesheuvel
2018-11-25 5:58 ` Sughosh Ganu
0 siblings, 1 reply; 14+ messages in thread
From: Ard Biesheuvel @ 2018-11-23 18:28 UTC (permalink / raw)
To: Sughosh Ganu; +Cc: edk2-devel@lists.01.org, Achin Gupta, Leif Lindholm
On Thu, 25 Oct 2018 at 09:33, Sughosh Ganu <sughosh.ganu@arm.com> wrote:
>
> From: Achin Gupta <achin.gupta@arm.com>
>
> This patch adds the definitions, sources, packages and library classes
> needed to compile and link MMU Library suitable for use in S-EL0.
>
> Currently, this is used only during the Standalone MM Core
> initialization and hence defined as MM_CORE_STANDALONE Module.
>
> Contributed-under: TianoCore Contribution Agreement 1.1
> Signed-off-by: Sughosh Ganu <sughosh.ganu@arm.com>
> ---
> ArmPkg/Library/ArmMmuLib/{ArmMmuPeiLib.inf => ArmMmuStandaloneMmCoreLib.inf} | 23 +++++++++-----------
The code in the previous patch looks fine, but I'd prefer it if we
expose this as a separate library class, not ArmMmuLib
So please just add a new file, say,
ArmPkg/include/Library/StandaloneMmMmuLib.h, add only the functions
you need, and add it to the LibraryClasses section of ArmPkg.dec as a
new library class.
Then, you can modify the previous patch to include an updated .inf
that describes it as being an implementation of StandaloneMmMmuLib.
You can then also drop the unimplemented ArmConfigureMmu etc.
> 1 file changed, 10 insertions(+), 13 deletions(-)
>
> diff --git a/ArmPkg/Library/ArmMmuLib/ArmMmuPeiLib.inf b/ArmPkg/Library/ArmMmuLib/ArmMmuStandaloneMmCoreLib.inf
> similarity index 51%
> copy from ArmPkg/Library/ArmMmuLib/ArmMmuPeiLib.inf
> copy to ArmPkg/Library/ArmMmuLib/ArmMmuStandaloneMmCoreLib.inf
> index ecf13f790734..9f5593d3f6c8 100644
> --- a/ArmPkg/Library/ArmMmuLib/ArmMmuPeiLib.inf
> +++ b/ArmPkg/Library/ArmMmuLib/ArmMmuStandaloneMmCoreLib.inf
> @@ -1,6 +1,6 @@
> #/** @file
> #
> -# Copyright (c) 2016 Linaro Ltd. All rights reserved.
> +# Copyright (c) 2017 - 2018, ARM Limited. All rights reserved.
> #
> # This program and the accompanying materials
> # are licensed and made available under the terms and conditions of the BSD License
> @@ -13,22 +13,20 @@
> #**/
>
> [Defines]
> - INF_VERSION = 0x00010005
> - BASE_NAME = ArmMmuPeiLib
> - FILE_GUID = b50d8d53-1ad1-44ea-9e69-8c89d4a6d08b
> - MODULE_TYPE = PEIM
> + INF_VERSION = 0x0001001A
> + BASE_NAME = ArmMmuStandaloneMmCoreLib
> + FILE_GUID = da8f0232-fb14-42f0-922c-63104d2c70bd
> + MODULE_TYPE = MM_CORE_STANDALONE
> VERSION_STRING = 1.0
> - LIBRARY_CLASS = ArmMmuLib|PEIM
> - CONSTRUCTOR = ArmMmuPeiLibConstructor
> + LIBRARY_CLASS = ArmMmuStandaloneMmCoreLib|MM_CORE_STANDALONE
> + PI_SPECIFICATION_VERSION = 0x00010032
> + CONSTRUCTOR = ArmMmuStandaloneMmCoreLibConstructor
>
> [Sources.AARCH64]
> - AArch64/ArmMmuLibCore.c
> - AArch64/ArmMmuPeiLibConstructor.c
> - AArch64/ArmMmuLibReplaceEntry.S
> + AArch64/ArmMmuStandaloneMmCoreLib.c
>
> [Packages]
> ArmPkg/ArmPkg.dec
> - EmbeddedPkg/EmbeddedPkg.dec
> MdePkg/MdePkg.dec
>
> [LibraryClasses]
> @@ -36,5 +34,4 @@ [LibraryClasses]
> CacheMaintenanceLib
> MemoryAllocationLib
>
> -[Pcd.AARCH64]
> - gEmbeddedTokenSpaceGuid.PcdPrePiCpuMemorySize
> +
> --
> 2.7.4
>
^ permalink raw reply [flat|nested] 14+ messages in thread* Re: [PATCH v3 6/6] ArmPkg/ArmMmuLib: Add MMU library inf file suitable for use in S-EL0.
2018-11-23 18:28 ` Ard Biesheuvel
@ 2018-11-25 5:58 ` Sughosh Ganu
0 siblings, 0 replies; 14+ messages in thread
From: Sughosh Ganu @ 2018-11-25 5:58 UTC (permalink / raw)
To: Ard Biesheuvel, leif.lindholm, edk2-devel
hi Ard,
On Fri Nov 23, 2018 at 07:28:19PM +0100, Ard Biesheuvel wrote:
> On Thu, 25 Oct 2018 at 09:33, Sughosh Ganu <sughosh.ganu@arm.com> wrote:
> >
> > From: Achin Gupta <achin.gupta@arm.com>
> >
> > This patch adds the definitions, sources, packages and library classes
> > needed to compile and link MMU Library suitable for use in S-EL0.
> >
> > Currently, this is used only during the Standalone MM Core
> > initialization and hence defined as MM_CORE_STANDALONE Module.
> >
> > Contributed-under: TianoCore Contribution Agreement 1.1
> > Signed-off-by: Sughosh Ganu <sughosh.ganu@arm.com>
> > ---
> > ArmPkg/Library/ArmMmuLib/{ArmMmuPeiLib.inf => ArmMmuStandaloneMmCoreLib.inf} | 23 +++++++++-----------
>
> The code in the previous patch looks fine, but I'd prefer it if we
> expose this as a separate library class, not ArmMmuLib
>
> So please just add a new file, say,
> ArmPkg/include/Library/StandaloneMmMmuLib.h, add only the functions
> you need, and add it to the LibraryClasses section of ArmPkg.dec as a
> new library class.
>
> Then, you can modify the previous patch to include an updated .inf
> that describes it as being an implementation of StandaloneMmMmuLib.
> You can then also drop the unimplemented ArmConfigureMmu etc.
Thanks for reviewing the patches. I will incorporate the review
comments from both the patches, and post a V4 in the coming week.
-sughosh
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [PATCH v3 0/6] ArmPkg related changes for StandaloneMM package
2018-10-25 7:32 [PATCH v3 0/6] ArmPkg related changes for StandaloneMM package Sughosh Ganu
` (5 preceding siblings ...)
2018-10-25 7:32 ` [PATCH v3 6/6] ArmPkg/ArmMmuLib: Add MMU library inf file " Sughosh Ganu
@ 2018-11-19 4:48 ` Sughosh Ganu
2018-11-19 5:00 ` Sughosh Ganu
7 siblings, 0 replies; 14+ messages in thread
From: Sughosh Ganu @ 2018-11-19 4:48 UTC (permalink / raw)
To: edk2-devel
hi Ard,
On Thu Oct 25, 2018 at 01:02:33PM +0530, Sughosh Ganu wrote:
> The following patch series adds support for Management Mode related
> changes for aarch64 based platforms.
>
> Changes since v2:
> Based on review comments from Ard, moved the memory attribute updation
> changes out of DebugPeCoffExtraActionLib into an extra action library
> added in StandaloneMM package. The patch for setting the memory
> attributes, now under StandaloneMmPkg directory, will be submitted
> separately from this series.
Can you please review the V3 of this series. Based on your review
comments, i have moved the memory attribute updation into an extra
action lib added under StandaloneMmPkg. Can you please check if these
updated patches for ArmPkg[1] and the one under StandaloneMmPkg[2] are
fine.
I had put you and Leif on Cc while sending out the patches, but i
think that the mailserver deleted those, which is why you may have
missed the patches.
-sughosh
[1] - https://lists.01.org/pipermail/edk2-devel/2018-October/031377.html
[2] - https://lists.01.org/pipermail/edk2-devel/2018-October/031384.html
>
>
> Achin Gupta (5):
> ArmPkg: Add PCDs needed for MM communication driver.
> ArmPkg/Drivers: Add EFI_MM_COMMUNICATION_PROTOCOL DXE driver.
> ArmPkg/Include: Add MM interface SVC return codes.
> ArmPkg/ArmMmuLib: Add MMU Library suitable for use in S-EL0.
> ArmPkg/ArmMmuLib: Add MMU library inf file suitable for use in S-EL0.
>
> Sughosh Ganu (1):
> ArmPkg/Include: Fix the SPM version SVC ID
>
> ArmPkg/ArmPkg.dec | 3 +
> ArmPkg/Drivers/MmCommunicationDxe/MmCommunication.inf | 56 +++
> ArmPkg/Library/ArmMmuLib/{ArmMmuPeiLib.inf => ArmMmuStandaloneMmCoreLib.inf} | 23 +-
> ArmPkg/Drivers/MmCommunicationDxe/MmCommunicate.h | 28 ++
> ArmPkg/Include/IndustryStandard/ArmMmSvc.h | 9 +-
> ArmPkg/Drivers/MmCommunicationDxe/MmCommunication.c | 395 ++++++++++++++++++++
> ArmPkg/Library/ArmMmuLib/AArch64/ArmMmuStandaloneMmCoreLib.c | 204 ++++++++++
> 7 files changed, 704 insertions(+), 14 deletions(-)
> create mode 100644 ArmPkg/Drivers/MmCommunicationDxe/MmCommunication.inf
> copy ArmPkg/Library/ArmMmuLib/{ArmMmuPeiLib.inf => ArmMmuStandaloneMmCoreLib.inf} (51%)
> create mode 100644 ArmPkg/Drivers/MmCommunicationDxe/MmCommunicate.h
> create mode 100644 ArmPkg/Drivers/MmCommunicationDxe/MmCommunication.c
> create mode 100644 ArmPkg/Library/ArmMmuLib/AArch64/ArmMmuStandaloneMmCoreLib.c
>
> --
> 2.7.4
>
> _______________________________________________
> edk2-devel mailing list
> edk2-devel@lists.01.org
> https://lists.01.org/mailman/listinfo/edk2-devel
--
-sughosh
^ permalink raw reply [flat|nested] 14+ messages in thread* Re: [PATCH v3 0/6] ArmPkg related changes for StandaloneMM package
2018-10-25 7:32 [PATCH v3 0/6] ArmPkg related changes for StandaloneMM package Sughosh Ganu
` (6 preceding siblings ...)
2018-11-19 4:48 ` [PATCH v3 0/6] ArmPkg related changes for StandaloneMM package Sughosh Ganu
@ 2018-11-19 5:00 ` Sughosh Ganu
2018-11-21 16:01 ` Thomas Abraham
7 siblings, 1 reply; 14+ messages in thread
From: Sughosh Ganu @ 2018-11-19 5:00 UTC (permalink / raw)
To: ard.biesheuvel, leif.lindholm; +Cc: edk2-devel, achin.gupta
hi Ard,
On Thu Oct 25, 2018 at 01:02:33PM +0530, Sughosh Ganu wrote:
> The following patch series adds support for Management Mode related
> changes for aarch64 based platforms.
>
> Changes since v2:
> Based on review comments from Ard, moved the memory attribute updation
> changes out of DebugPeCoffExtraActionLib into an extra action library
> added in StandaloneMM package. The patch for setting the memory
> attributes, now under StandaloneMmPkg directory, will be submitted
> separately from this series.
Can you please review the V3 of this series. Based on your review
comments, i have moved the memory attribute updation into an extra
action lib added under StandaloneMmPkg. Can you please check if these
updated patches for ArmPkg[1] and the one under StandaloneMmPkg[2] are
fine.
I had put you and Leif on Cc while sending out the patches, but i
think that the mailserver deleted those, which is why you may have
missed the patches.
-sughosh
[1] - https://lists.01.org/pipermail/edk2-devel/2018-October/031377.html
[2] - https://lists.01.org/pipermail/edk2-devel/2018-October/031384.html
>
>
> Achin Gupta (5):
> ArmPkg: Add PCDs needed for MM communication driver.
> ArmPkg/Drivers: Add EFI_MM_COMMUNICATION_PROTOCOL DXE driver.
> ArmPkg/Include: Add MM interface SVC return codes.
> ArmPkg/ArmMmuLib: Add MMU Library suitable for use in S-EL0.
> ArmPkg/ArmMmuLib: Add MMU library inf file suitable for use in S-EL0.
>
> Sughosh Ganu (1):
> ArmPkg/Include: Fix the SPM version SVC ID
>
> ArmPkg/ArmPkg.dec | 3 +
> ArmPkg/Drivers/MmCommunicationDxe/MmCommunication.inf | 56 +++
> ArmPkg/Library/ArmMmuLib/{ArmMmuPeiLib.inf => ArmMmuStandaloneMmCoreLib.inf} | 23 +-
> ArmPkg/Drivers/MmCommunicationDxe/MmCommunicate.h | 28 ++
> ArmPkg/Include/IndustryStandard/ArmMmSvc.h | 9 +-
> ArmPkg/Drivers/MmCommunicationDxe/MmCommunication.c | 395 ++++++++++++++++++++
> ArmPkg/Library/ArmMmuLib/AArch64/ArmMmuStandaloneMmCoreLib.c | 204 ++++++++++
> 7 files changed, 704 insertions(+), 14 deletions(-)
> create mode 100644 ArmPkg/Drivers/MmCommunicationDxe/MmCommunication.inf
> copy ArmPkg/Library/ArmMmuLib/{ArmMmuPeiLib.inf => ArmMmuStandaloneMmCoreLib.inf} (51%)
> create mode 100644 ArmPkg/Drivers/MmCommunicationDxe/MmCommunicate.h
> create mode 100644 ArmPkg/Drivers/MmCommunicationDxe/MmCommunication.c
> create mode 100644 ArmPkg/Library/ArmMmuLib/AArch64/ArmMmuStandaloneMmCoreLib.c
>
> --
> 2.7.4
>
> _______________________________________________
> edk2-devel mailing list
> edk2-devel@lists.01.org
> https://lists.01.org/mailman/listinfo/edk2-devel
--
-sughosh
^ permalink raw reply [flat|nested] 14+ messages in thread* Re: [PATCH v3 0/6] ArmPkg related changes for StandaloneMM package
2018-11-19 5:00 ` Sughosh Ganu
@ 2018-11-21 16:01 ` Thomas Abraham
2018-11-21 22:17 ` Ard Biesheuvel
0 siblings, 1 reply; 14+ messages in thread
From: Thomas Abraham @ 2018-11-21 16:01 UTC (permalink / raw)
To: sughosh.ganu; +Cc: Ard Biesheuvel, Leif Lindholm, edk2-devel
Hi Ard, Leif,
On Mon, Nov 19, 2018 at 10:39 AM Sughosh Ganu <sughosh.ganu@arm.com> wrote:
>
> hi Ard,
>
> On Thu Oct 25, 2018 at 01:02:33PM +0530, Sughosh Ganu wrote:
> > The following patch series adds support for Management Mode related
> > changes for aarch64 based platforms.
> >
> > Changes since v2:
> > Based on review comments from Ard, moved the memory attribute updation
> > changes out of DebugPeCoffExtraActionLib into an extra action library
> > added in StandaloneMM package. The patch for setting the memory
> > attributes, now under StandaloneMmPkg directory, will be submitted
> > separately from this series.
>
> Can you please review the V3 of this series. Based on your review
> comments, i have moved the memory attribute updation into an extra
> action lib added under StandaloneMmPkg. Can you please check if these
> updated patches for ArmPkg[1] and the one under StandaloneMmPkg[2] are
> fine.
>
> I had put you and Leif on Cc while sending out the patches, but i
> think that the mailserver deleted those, which is why you may have
> missed the patches.
>
> -sughosh
>
> [1] - https://lists.01.org/pipermail/edk2-devel/2018-October/031377.html
> [2] - https://lists.01.org/pipermail/edk2-devel/2018-October/031384.html
>
> >
> >
> > Achin Gupta (5):
> > ArmPkg: Add PCDs needed for MM communication driver.
> > ArmPkg/Drivers: Add EFI_MM_COMMUNICATION_PROTOCOL DXE driver.
> > ArmPkg/Include: Add MM interface SVC return codes.
> > ArmPkg/ArmMmuLib: Add MMU Library suitable for use in S-EL0.
> > ArmPkg/ArmMmuLib: Add MMU library inf file suitable for use in S-EL0.
> >
> > Sughosh Ganu (1):
> > ArmPkg/Include: Fix the SPM version SVC ID
> >
> > ArmPkg/ArmPkg.dec | 3 +
> > ArmPkg/Drivers/MmCommunicationDxe/MmCommunication.inf | 56 +++
> > ArmPkg/Library/ArmMmuLib/{ArmMmuPeiLib.inf => ArmMmuStandaloneMmCoreLib.inf} | 23 +-
> > ArmPkg/Drivers/MmCommunicationDxe/MmCommunicate.h | 28 ++
> > ArmPkg/Include/IndustryStandard/ArmMmSvc.h | 9 +-
> > ArmPkg/Drivers/MmCommunicationDxe/MmCommunication.c | 395 ++++++++++++++++++++
> > ArmPkg/Library/ArmMmuLib/AArch64/ArmMmuStandaloneMmCoreLib.c | 204 ++++++++++
> > 7 files changed, 704 insertions(+), 14 deletions(-)
> > create mode 100644 ArmPkg/Drivers/MmCommunicationDxe/MmCommunication.inf
> > copy ArmPkg/Library/ArmMmuLib/{ArmMmuPeiLib.inf => ArmMmuStandaloneMmCoreLib.inf} (51%)
> > create mode 100644 ArmPkg/Drivers/MmCommunicationDxe/MmCommunicate.h
> > create mode 100644 ArmPkg/Drivers/MmCommunicationDxe/MmCommunication.c
> > create mode 100644 ArmPkg/Library/ArmMmuLib/AArch64/ArmMmuStandaloneMmCoreLib.c
Any feedback on this patch series. This series is important in getting
the MM Standalone mode feature supported for Arm platforms. There are
patches being worked on to enable secure variable access feature for
Arm platforms and it depends on this series. So if there any comments
on these patches, please let us know.
Thanks,
Thomas.
> >
> > --
> > 2.7.4
> >
> > _______________________________________________
> > edk2-devel mailing list
> > edk2-devel@lists.01.org
> > https://lists.01.org/mailman/listinfo/edk2-devel
>
> --
> -sughosh
> _______________________________________________
> edk2-devel mailing list
> edk2-devel@lists.01.org
> https://lists.01.org/mailman/listinfo/edk2-devel
^ permalink raw reply [flat|nested] 14+ messages in thread* Re: [PATCH v3 0/6] ArmPkg related changes for StandaloneMM package
2018-11-21 16:01 ` Thomas Abraham
@ 2018-11-21 22:17 ` Ard Biesheuvel
0 siblings, 0 replies; 14+ messages in thread
From: Ard Biesheuvel @ 2018-11-21 22:17 UTC (permalink / raw)
To: Thomas Panakamattam Abraham
Cc: Sughosh Ganu, Leif Lindholm, edk2-devel@lists.01.org
On Wed, 21 Nov 2018 at 17:01, Thomas Abraham <thomas.abraham@arm.com> wrote:
>
> Hi Ard, Leif,
>
> On Mon, Nov 19, 2018 at 10:39 AM Sughosh Ganu <sughosh.ganu@arm.com> wrote:
> >
> > hi Ard,
> >
> > On Thu Oct 25, 2018 at 01:02:33PM +0530, Sughosh Ganu wrote:
> > > The following patch series adds support for Management Mode related
> > > changes for aarch64 based platforms.
> > >
> > > Changes since v2:
> > > Based on review comments from Ard, moved the memory attribute updation
> > > changes out of DebugPeCoffExtraActionLib into an extra action library
> > > added in StandaloneMM package. The patch for setting the memory
> > > attributes, now under StandaloneMmPkg directory, will be submitted
> > > separately from this series.
> >
> > Can you please review the V3 of this series. Based on your review
> > comments, i have moved the memory attribute updation into an extra
> > action lib added under StandaloneMmPkg. Can you please check if these
> > updated patches for ArmPkg[1] and the one under StandaloneMmPkg[2] are
> > fine.
> >
> > I had put you and Leif on Cc while sending out the patches, but i
> > think that the mailserver deleted those, which is why you may have
> > missed the patches.
> >
> > -sughosh
> >
> > [1] - https://lists.01.org/pipermail/edk2-devel/2018-October/031377.html
> > [2] - https://lists.01.org/pipermail/edk2-devel/2018-October/031384.html
> >
> > >
> > >
> > > Achin Gupta (5):
> > > ArmPkg: Add PCDs needed for MM communication driver.
> > > ArmPkg/Drivers: Add EFI_MM_COMMUNICATION_PROTOCOL DXE driver.
> > > ArmPkg/Include: Add MM interface SVC return codes.
> > > ArmPkg/ArmMmuLib: Add MMU Library suitable for use in S-EL0.
> > > ArmPkg/ArmMmuLib: Add MMU library inf file suitable for use in S-EL0.
> > >
> > > Sughosh Ganu (1):
> > > ArmPkg/Include: Fix the SPM version SVC ID
> > >
> > > ArmPkg/ArmPkg.dec | 3 +
> > > ArmPkg/Drivers/MmCommunicationDxe/MmCommunication.inf | 56 +++
> > > ArmPkg/Library/ArmMmuLib/{ArmMmuPeiLib.inf => ArmMmuStandaloneMmCoreLib.inf} | 23 +-
> > > ArmPkg/Drivers/MmCommunicationDxe/MmCommunicate.h | 28 ++
> > > ArmPkg/Include/IndustryStandard/ArmMmSvc.h | 9 +-
> > > ArmPkg/Drivers/MmCommunicationDxe/MmCommunication.c | 395 ++++++++++++++++++++
> > > ArmPkg/Library/ArmMmuLib/AArch64/ArmMmuStandaloneMmCoreLib.c | 204 ++++++++++
> > > 7 files changed, 704 insertions(+), 14 deletions(-)
> > > create mode 100644 ArmPkg/Drivers/MmCommunicationDxe/MmCommunication.inf
> > > copy ArmPkg/Library/ArmMmuLib/{ArmMmuPeiLib.inf => ArmMmuStandaloneMmCoreLib.inf} (51%)
> > > create mode 100644 ArmPkg/Drivers/MmCommunicationDxe/MmCommunicate.h
> > > create mode 100644 ArmPkg/Drivers/MmCommunicationDxe/MmCommunication.c
> > > create mode 100644 ArmPkg/Library/ArmMmuLib/AArch64/ArmMmuStandaloneMmCoreLib.c
>
> Any feedback on this patch series. This series is important in getting
> the MM Standalone mode feature supported for Arm platforms. There are
> patches being worked on to enable secure variable access feature for
> Arm platforms and it depends on this series. So if there any comments
> on these patches, please let us know.
>
I will look into these patches before the end of the week.
^ permalink raw reply [flat|nested] 14+ messages in thread