From: Fu Siyuan <siyuan.fu@intel.com>
To: edk2-devel@lists.01.org
Cc: Jiaxin Wu <jiaxin.wu@intel.com>, Ting Ye <ting.ye@intel.com>
Subject: [PATCH v2 1/6] NetworkPkg: Add DSC/FDF include segment files to NetworkPkg.
Date: Thu, 22 Nov 2018 13:21:47 +0800 [thread overview]
Message-ID: <20181122052153.89464-2-siyuan.fu@intel.com> (raw)
In-Reply-To: <20181122052153.89464-1-siyuan.fu@intel.com>
This patch provides a set of include segment files for platform owner to
easily enable/disable network stack support on their platform.
For DSC, there are:
- a "NetworkDefines.dsc.inc" for the [Defines] section(s),
- a "NetworkLibs.dsc.inc" for the [LibraryClasses*] section(s),
- a "NetworkPcds.dsc.inc" for the [Pcds*] section(s),
- a "NetworkComponents.dsc.inc" for the [Components*] section(s).
For FDF, there is:
- a "Network.fdf.inc" for the [Fv*] section(s).
These files can be added to the platform DSC/FDF file by using
!include NetworkPkg/xxx
where "xxx" is the *.inc file name.
A set of flags can be changed before the include line or in build command
line ("-D FLAG=VALUE") to enable or disable related feature set, please
check "NetworkDefines.dsc.inc" for a detail description of each flag.
The default value of these flags are:
DEFINE NETWORK_ENABLE = TRUE
DEFINE NETWORK_SNP_ENABLE = TRUE
DEFINE NETWORK_IP4_ENABLE = TRUE
DEFINE NETWORK_IP6_ENABLE = TRUE
DEFINE NETWORK_TLS_ENABLE = TRUE
DEFINE NETWORK_HTTP_BOOT_ENABLE = TRUE
DEFINE NETWORK_ALLOW_HTTP_CONNECTIONS = FALSE
DEFINE NETWORK_IPSEC_ENABLE = TRUE
DEFINE NETWORK_ISCSI_ENABLE = TRUE
DEFINE NETWORK_VLAN_ENABLE = TRUE
Related BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=1293
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Cc: Ting Ye <ting.ye@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
---
Notes:
v2:
1. Split the "Network.dsc.inc" in to 4 files for different sections in DSC
file. This could provide more flexibility to platform owner to use the
include files.
2. Clarify the OpenSSL dependency of TLS, iSCSI and IPsec enable flag.
3. Use "!error" statement for incorrect flag value check.
4. Other decoration work according to Laszlo's comments.
NetworkPkg/Network.fdf.inc | 69 ++++++++++
NetworkPkg/NetworkComponents.dsc.inc | 71 ++++++++++
NetworkPkg/NetworkDefines.dsc.inc | 138 ++++++++++++++++++++
NetworkPkg/NetworkLibs.dsc.inc | 25 ++++
NetworkPkg/NetworkPcds.dsc.inc | 22 ++++
NetworkPkg/NetworkPkg.dsc | 28 +---
6 files changed, 331 insertions(+), 22 deletions(-)
diff --git a/NetworkPkg/Network.fdf.inc b/NetworkPkg/Network.fdf.inc
new file mode 100644
index 000000000000..abd4c6c363d5
--- /dev/null
+++ b/NetworkPkg/Network.fdf.inc
@@ -0,0 +1,69 @@
+## @file
+# Network FDF include file for All Architectures.
+#
+# This file can be included to a platform FDF by using "!include NetworkPkg/Network.fdf.inc"
+# to add EDKII network stack drivers according to the value of flags described in
+# "NetworkDefines.dsc.inc".
+#
+# Copyright (c) 2018, Intel Corporation. All rights reserved.<BR>
+#
+# This program and the accompanying materials
+# are licensed and made available under the terms and conditions of the BSD License
+# which accompanies this distribution. The full text of the license may be found at
+# http://opensource.org/licenses/bsd-license.php
+#
+# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+#
+
+!if $(NETWORK_ENABLE) == TRUE
+ INF MdeModulePkg/Universal/Network/DpcDxe/DpcDxe.inf
+
+ !if $(NETWORK_SNP_ENABLE) == TRUE
+ INF MdeModulePkg/Universal/Network/SnpDxe/SnpDxe.inf
+ !endif
+
+ !if $(NETWORK_VLAN_ENABLE) == TRUE
+ INF MdeModulePkg/Universal/Network/VlanConfigDxe/VlanConfigDxe.inf
+ !endif
+
+ INF MdeModulePkg/Universal/Network/MnpDxe/MnpDxe.inf
+
+ !if $(NETWORK_IP4_ENABLE) == TRUE
+ INF MdeModulePkg/Universal/Network/ArpDxe/ArpDxe.inf
+ INF MdeModulePkg/Universal/Network/Dhcp4Dxe/Dhcp4Dxe.inf
+ INF MdeModulePkg/Universal/Network/Ip4Dxe/Ip4Dxe.inf
+ INF MdeModulePkg/Universal/Network/Udp4Dxe/Udp4Dxe.inf
+ INF MdeModulePkg/Universal/Network/Mtftp4Dxe/Mtftp4Dxe.inf
+ !endif
+
+ !if $(NETWORK_IP6_ENABLE) == TRUE
+ INF NetworkPkg/Dhcp6Dxe/Dhcp6Dxe.inf
+ INF NetworkPkg/Ip6Dxe/Ip6Dxe.inf
+ INF NetworkPkg/Udp6Dxe/Udp6Dxe.inf
+ INF NetworkPkg/Mtftp6Dxe/Mtftp6Dxe.inf
+ !endif
+
+ INF NetworkPkg/TcpDxe/TcpDxe.inf
+ INF NetworkPkg/UefiPxeBcDxe/UefiPxeBcDxe.inf
+
+ !if $(NETWORK_TLS_ENABLE) == TRUE
+ INF NetworkPkg/TlsDxe/TlsDxe.inf
+ INF NetworkPkg/TlsAuthConfigDxe/TlsAuthConfigDxe.inf
+ !endif
+
+ !if $(NETWORK_HTTP_BOOT_ENABLE) == TRUE
+ INF NetworkPkg/DnsDxe/DnsDxe.inf
+ INF NetworkPkg/HttpDxe/HttpDxe.inf
+ INF NetworkPkg/HttpUtilitiesDxe/HttpUtilitiesDxe.inf
+ INF NetworkPkg/HttpBootDxe/HttpBootDxe.inf
+ !endif
+
+ !if $(NETWORK_ISCSI_ENABLE) == TRUE
+ INF NetworkPkg/IScsiDxe/IScsiDxe.inf
+ !endif
+
+ !if $(NETWORK_IPSEC_ENABLE) == TRUE
+ INF NetworkPkg/IpSecDxe/IpSecDxe.inf
+ !endif
+!endif
diff --git a/NetworkPkg/NetworkComponents.dsc.inc b/NetworkPkg/NetworkComponents.dsc.inc
new file mode 100644
index 000000000000..8074489b8e06
--- /dev/null
+++ b/NetworkPkg/NetworkComponents.dsc.inc
@@ -0,0 +1,71 @@
+## @file
+# Network DSC include file for [Components*] section of all Architectures.
+#
+# This file can be included to the [Components*] section(s) of a platform DSC file
+# by using "!include NetworkPkg/NetworkComponents.dsc.inc" to specify the INF files
+# of EDKII network drivers according to the value of flags described in
+# "NetworkDefines.dsc.inc".
+#
+# Copyright (c) 2018, Intel Corporation. All rights reserved.<BR>
+#
+# This program and the accompanying materials
+# are licensed and made available under the terms and conditions of the BSD License
+# which accompanies this distribution. The full text of the license may be found at
+# http://opensource.org/licenses/bsd-license.php
+#
+# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+#
+##
+
+!if $(NETWORK_ENABLE) == TRUE
+ MdeModulePkg/Universal/Network/DpcDxe/DpcDxe.inf
+
+ !if $(NETWORK_SNP_ENABLE) == TRUE
+ MdeModulePkg/Universal/Network/SnpDxe/SnpDxe.inf
+ !endif
+
+ !if $(NETWORK_VLAN_ENABLE) == TRUE
+ MdeModulePkg/Universal/Network/VlanConfigDxe/VlanConfigDxe.inf
+ !endif
+
+ MdeModulePkg/Universal/Network/MnpDxe/MnpDxe.inf
+
+ !if $(NETWORK_IP4_ENABLE) == TRUE
+ MdeModulePkg/Universal/Network/ArpDxe/ArpDxe.inf
+ MdeModulePkg/Universal/Network/Dhcp4Dxe/Dhcp4Dxe.inf
+ MdeModulePkg/Universal/Network/Ip4Dxe/Ip4Dxe.inf
+ MdeModulePkg/Universal/Network/Udp4Dxe/Udp4Dxe.inf
+ MdeModulePkg/Universal/Network/Mtftp4Dxe/Mtftp4Dxe.inf
+ !endif
+
+ !if $(NETWORK_IP6_ENABLE) == TRUE
+ NetworkPkg/Dhcp6Dxe/Dhcp6Dxe.inf
+ NetworkPkg/Ip6Dxe/Ip6Dxe.inf
+ NetworkPkg/Udp6Dxe/Udp6Dxe.inf
+ NetworkPkg/Mtftp6Dxe/Mtftp6Dxe.inf
+ !endif
+
+ NetworkPkg/TcpDxe/TcpDxe.inf
+ NetworkPkg/UefiPxeBcDxe/UefiPxeBcDxe.inf
+
+ !if $(NETWORK_TLS_ENABLE) == TRUE
+ NetworkPkg/TlsDxe/TlsDxe.inf
+ NetworkPkg/TlsAuthConfigDxe/TlsAuthConfigDxe.inf
+ !endif
+
+ !if $(NETWORK_HTTP_BOOT_ENABLE) == TRUE
+ NetworkPkg/DnsDxe/DnsDxe.inf
+ NetworkPkg/HttpDxe/HttpDxe.inf
+ NetworkPkg/HttpUtilitiesDxe/HttpUtilitiesDxe.inf
+ NetworkPkg/HttpBootDxe/HttpBootDxe.inf
+ !endif
+
+ !if $(NETWORK_ISCSI_ENABLE) == TRUE
+ NetworkPkg/IScsiDxe/IScsiDxe.inf
+ !endif
+
+ !if $(NETWORK_IPSEC_ENABLE) == TRUE
+ NetworkPkg/IpSecDxe/IpSecDxe.inf
+ !endif
+!endif
diff --git a/NetworkPkg/NetworkDefines.dsc.inc b/NetworkPkg/NetworkDefines.dsc.inc
new file mode 100644
index 000000000000..648c065baadb
--- /dev/null
+++ b/NetworkPkg/NetworkDefines.dsc.inc
@@ -0,0 +1,138 @@
+## @file
+# Network DSC include file for [Defines] section of all Architectures.
+#
+# This file can be included to the [Defines] section of a platform DSC file by
+# using "!include NetworkPkg/NetworkDefines.dsc.inc" to set default value of
+# flags if they are not defined somewhere else, and also check the value to see
+# if there is any conflict.
+#
+# These flags can be defined before the !include line, or changed on the command
+# line to enable or disable related feature support.
+# -D FLAG=VALUE
+# The default value of these flags are:
+# DEFINE NETWORK_ENABLE = TRUE
+# DEFINE NETWORK_SNP_ENABLE = TRUE
+# DEFINE NETWORK_IP4_ENABLE = TRUE
+# DEFINE NETWORK_IP6_ENABLE = TRUE
+# DEFINE NETWORK_TLS_ENABLE = TRUE
+# DEFINE NETWORK_HTTP_BOOT_ENABLE = TRUE
+# DEFINE NETWORK_ALLOW_HTTP_CONNECTIONS = FALSE
+# DEFINE NETWORK_IPSEC_ENABLE = TRUE
+# DEFINE NETWORK_ISCSI_ENABLE = TRUE
+# DEFINE NETWORK_VLAN_ENABLE = TRUE
+#
+# Copyright (c) 2018, Intel Corporation. All rights reserved.<BR>
+#
+# This program and the accompanying materials
+# are licensed and made available under the terms and conditions of the BSD License
+# which accompanies this distribution. The full text of the license may be found at
+# http://opensource.org/licenses/bsd-license.php
+#
+# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+#
+##
+
+!ifndef NETWORK_ENABLE
+ #
+ # This flag is to enable or disable the whole network stack.
+ #
+ DEFINE NETWORK_ENABLE = TRUE
+!endif
+
+!ifndef NETWORK_SNP_ENABLE
+ #
+ # This flag is to include the common SNP driver or not.
+ #
+ DEFINE NETWORK_SNP_ENABLE = TRUE
+!endif
+
+!ifndef NETWORK_VLAN_ENABLE
+ #
+ # This flag is to enable or disable VLAN feature.
+ #
+ DEFINE NETWORK_VLAN_ENABLE = TRUE
+!endif
+
+!ifndef NETWORK_IP4_ENABLE
+ #
+ # This flag is to enable or disable IPv4 network stack.
+ #
+ DEFINE NETWORK_IP4_ENABLE = TRUE
+!endif
+
+!ifndef NETWORK_IP6_ENABLE
+ #
+ # This flag is to enable or disable IPv6 network stack.
+ #
+ DEFINE NETWORK_IP6_ENABLE = TRUE
+!endif
+
+!ifndef NETWORK_TLS_ENABLE
+ #
+ # This flag is to enable or disable TLS feature.
+ #
+ # Note: This feature depends on the OpenSSL building. To enable this feature, please
+ # follow the instructions found in the file "OpenSSL-HOWTO.txt" located in
+ # CryptoPkg\Library\OpensslLib to enable the OpenSSL building first.
+ # The OpensslLib.inf library instance should be used since libssl is required.
+ #
+ DEFINE NETWORK_TLS_ENABLE = TRUE
+!endif
+
+!ifndef NETWORK_HTTP_BOOT_ENABLE
+ #
+ # This flag is to enable or disable HTTP(S) boot feature.
+ #
+ DEFINE NETWORK_HTTP_BOOT_ENABLE = TRUE
+!endif
+
+!ifndef NETWORK_ALLOW_HTTP_CONNECTIONS
+ #
+ # Indicates whether HTTP connections (i.e., unsecured) are permitted or not.
+ #
+ # Note: If NETWORK_ALLOW_HTTP_CONNECTIONS is TRUE, HTTP connections are allowed.
+ # Both the "https://" and "http://" URI schemes are permitted. Otherwise, HTTP
+ # connections are denied. Only the "https://" URI scheme is permitted.
+ #
+ DEFINE NETWORK_ALLOW_HTTP_CONNECTIONS = FALSE
+!endif
+
+!ifndef NETWORK_ISCSI_ENABLE
+ #
+ # This flag is to enable or disable iSCSI feature.
+ #
+ # Note: This feature depends on the OpenSSL building. To enable this feature, please
+ # follow the instructions found in the file "OpenSSL-HOWTO.txt" located in
+ # CryptoPkg\Library\OpensslLib to enable the OpenSSL building first.
+ # Both OpensslLib.inf and OpensslLibCrypto.inf library instance can be used
+ # since libssl is not required for iSCSI.
+ #
+ DEFINE NETWORK_ISCSI_ENABLE = TRUE
+!endif
+
+!ifndef NETWORK_IPSEC_ENABLE
+ #
+ # This flag is to enable or disable IPsec feature.
+ #
+ # Note: This feature depends on the OpenSSL building. To enable this feature, please
+ # follow the instructions found in the file "OpenSSL-HOWTO.txt" located in
+ # CryptoPkg\Library\OpensslLib to enable the OpenSSL building first.
+ # Both OpensslLib.inf and OpensslLibCrypto.inf library instance can be used
+ # since libssl is not required for IPsec.
+ #
+ DEFINE NETWORK_IPSEC_ENABLE = TRUE
+!endif
+
+!if $(NETWORK_ENABLE) == TRUE
+ #
+ # Check the flags to see if there is any conflict.
+ #
+ !if ($(NETWORK_IP4_ENABLE) == FALSE) AND ($(NETWORK_IP6_ENABLE) == FALSE)
+ !error "Must enable at least IP4 or IP6 stack if NETWORK_ENABLE is set to TRUE!"
+ !endif
+
+ !if ($(NETWORK_HTTP_BOOT_ENABLE) == TRUE) AND ($(NETWORK_TLS_ENABLE) == FALSE) AND ($(NETWORK_ALLOW_HTTP_CONNECTIONS) == FALSE)
+ !error "Must enable TLS to support HTTPS, or allow unsecured HTTP connection, if NETWORK_HTTP_BOOT_ENABLE is set to TRUE!"
+ !endif
+!endif
diff --git a/NetworkPkg/NetworkLibs.dsc.inc b/NetworkPkg/NetworkLibs.dsc.inc
new file mode 100644
index 000000000000..67d09c262074
--- /dev/null
+++ b/NetworkPkg/NetworkLibs.dsc.inc
@@ -0,0 +1,25 @@
+## @file
+# Network DSC include file for [LibraryClasses*] section of all Architectures.
+#
+# This file can be included to the [LibraryClasses*] section(s) of a platform DSC file
+# by using "!include NetworkPkg/NetworkLibs.dsc.inc" to specify the library instances
+# of EDKII network library classes.
+#
+# Copyright (c) 2018, Intel Corporation. All rights reserved.<BR>
+#
+# This program and the accompanying materials
+# are licensed and made available under the terms and conditions of the BSD License
+# which accompanies this distribution. The full text of the license may be found at
+# http://opensource.org/licenses/bsd-license.php
+#
+# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+#
+##
+
+ DpcLib|MdeModulePkg/Library/DxeDpcLib/DxeDpcLib.inf
+ NetLib|MdeModulePkg/Library/DxeNetLib/DxeNetLib.inf
+ IpIoLib|MdeModulePkg/Library/DxeIpIoLib/DxeIpIoLib.inf
+ UdpIoLib|MdeModulePkg/Library/DxeUdpIoLib/DxeUdpIoLib.inf
+ TcpIoLib|MdeModulePkg/Library/DxeTcpIoLib/DxeTcpIoLib.inf
+ HttpLib|MdeModulePkg/Library/DxeHttpLib/DxeHttpLib.inf
diff --git a/NetworkPkg/NetworkPcds.dsc.inc b/NetworkPkg/NetworkPcds.dsc.inc
new file mode 100644
index 000000000000..3eee5b3ae0bf
--- /dev/null
+++ b/NetworkPkg/NetworkPcds.dsc.inc
@@ -0,0 +1,22 @@
+## @file
+# Network DSC include file for [Pcds*] section of all Architectures.
+#
+# This file can be included to the [Pcds*] section(s) of a platform DSC file
+# by using "!include NetworkPkg/NetworkPcds.dsc.inc" to specify PCD settings
+# according to the value of flags described in "NetworkDefines.dsc.inc".
+#
+# Copyright (c) 2018, Intel Corporation. All rights reserved.<BR>
+#
+# This program and the accompanying materials
+# are licensed and made available under the terms and conditions of the BSD License
+# which accompanies this distribution. The full text of the license may be found at
+# http://opensource.org/licenses/bsd-license.php
+#
+# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+#
+##
+
+!if $(NETWORK_ALLOW_HTTP_CONNECTIONS) == TRUE
+ gEfiNetworkPkgTokenSpaceGuid.PcdAllowHttpConnections|TRUE
+!endif
diff --git a/NetworkPkg/NetworkPkg.dsc b/NetworkPkg/NetworkPkg.dsc
index b543caa08fb1..654f73785054 100644
--- a/NetworkPkg/NetworkPkg.dsc
+++ b/NetworkPkg/NetworkPkg.dsc
@@ -24,6 +24,8 @@ [Defines]
BUILD_TARGETS = DEBUG|RELEASE|NOOPT
SKUID_IDENTIFIER = DEFAULT
+!include NetworkPkg/NetworkDefines.dsc.inc
+
[LibraryClasses]
DebugLib|MdePkg/Library/BaseDebugLibNull/BaseDebugLibNull.inf
BaseLib|MdePkg/Library/BaseLib/BaseLib.inf
@@ -47,12 +49,8 @@ [LibraryClasses]
DxeServicesTableLib|MdePkg/Library/DxeServicesTableLib/DxeServicesTableLib.inf
SafeIntLib|MdePkg/Library/BaseSafeIntLib/BaseSafeIntLib.inf
- DpcLib|MdeModulePkg/Library/DxeDpcLib/DxeDpcLib.inf
- NetLib|MdeModulePkg/Library/DxeNetLib/DxeNetLib.inf
- IpIoLib|MdeModulePkg/Library/DxeIpIoLib/DxeIpIoLib.inf
- UdpIoLib|MdeModulePkg/Library/DxeUdpIoLib/DxeUdpIoLib.inf
- TcpIoLib|MdeModulePkg/Library/DxeTcpIoLib/DxeTcpIoLib.inf
- HttpLib|MdeModulePkg/Library/DxeHttpLib/DxeHttpLib.inf
+!include NetworkPkg/NetworkLibs.dsc.inc
+
BaseCryptLib|CryptoPkg/Library/BaseCryptLib/BaseCryptLib.inf
OpensslLib|CryptoPkg/Library/OpensslLib/OpensslLib.inf
IntrinsicLib|CryptoPkg/Library/IntrinsicLib/IntrinsicLib.inf
@@ -86,6 +84,7 @@ [PcdsFeatureFlag]
[PcdsFixedAtBuild]
gEfiMdePkgTokenSpaceGuid.PcdDebugPropertyMask|0x2f
gEfiMdePkgTokenSpaceGuid.PcdDebugPrintErrorLevel|0x80000000
+!include NetworkPkg/NetworkPcds.dsc.inc
###################################################################################################
#
@@ -107,25 +106,10 @@ [PcdsFixedAtBuild]
###################################################################################################
[Components]
- NetworkPkg/Ip6Dxe/Ip6Dxe.inf
- NetworkPkg/TcpDxe/TcpDxe.inf
- NetworkPkg/Udp6Dxe/Udp6Dxe.inf
- NetworkPkg/Dhcp6Dxe/Dhcp6Dxe.inf
- NetworkPkg/Mtftp6Dxe/Mtftp6Dxe.inf
- NetworkPkg/DnsDxe/DnsDxe.inf
- NetworkPkg/HttpDxe/HttpDxe.inf
- NetworkPkg/HttpUtilitiesDxe/HttpUtilitiesDxe.inf
- NetworkPkg/HttpBootDxe/HttpBootDxe.inf
+!include NetworkPkg/NetworkComponents.dsc.inc
NetworkPkg/Application/IpsecConfig/IpSecConfig.inf
NetworkPkg/Application/VConfig/VConfig.inf
-[Components.IA32, Components.X64]
- NetworkPkg/IpSecDxe/IpSecDxe.inf
- NetworkPkg/IScsiDxe/IScsiDxe.inf
- NetworkPkg/UefiPxeBcDxe/UefiPxeBcDxe.inf
- NetworkPkg/TlsDxe/TlsDxe.inf
- NetworkPkg/TlsAuthConfigDxe/TlsAuthConfigDxe.inf
-
[BuildOptions]
*_*_*_CC_FLAGS = -D DISABLE_NEW_DEPRECATED_INTERFACES
--
2.19.1.windows.1
next prev parent reply other threads:[~2018-11-22 5:22 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-11-22 5:21 [PATCH v2 0/6] Add DSC/FDF include segment files for network stack Fu Siyuan
2018-11-22 5:21 ` Fu Siyuan [this message]
2018-11-22 9:56 ` [PATCH v2 1/6] NetworkPkg: Add DSC/FDF include segment files to NetworkPkg Ni, Ruiyu
2018-11-22 10:52 ` Fu, Siyuan
2018-11-23 10:56 ` Laszlo Ersek
2018-12-10 8:36 ` Ard Biesheuvel
2018-12-10 14:40 ` Laszlo Ersek
2018-12-10 16:39 ` Ard Biesheuvel
2018-11-22 5:21 ` [PATCH v2 2/6] Nt32Pkg: Update DSC/FDF to use NetworkPkg's include fragment file Fu Siyuan
2018-11-22 5:21 ` [PATCH v2 3/6] ArmVirtPkg: " Fu Siyuan
2018-11-23 12:29 ` Laszlo Ersek
2018-11-23 12:30 ` Laszlo Ersek
2018-11-23 16:50 ` Laszlo Ersek
2018-11-22 5:21 ` [PATCH v2 4/6] EmulatorPkg: " Fu Siyuan
2018-11-22 5:21 ` [PATCH v2 5/6] OvmfPkg: " Fu Siyuan
2018-11-23 12:00 ` Laszlo Ersek
2018-11-23 12:10 ` Laszlo Ersek
2018-11-23 12:19 ` Laszlo Ersek
2018-11-22 5:21 ` [PATCH v2 6/6] Vlv2TbltDevicePkg: " Fu Siyuan
2018-11-22 6:14 ` [PATCH v2 0/6] Add DSC/FDF include segment files for network stack Gao, Liming
2018-11-22 15:48 ` Laszlo Ersek
2018-11-23 16:02 ` Gao, Liming
2018-11-23 18:35 ` Laszlo Ersek
2018-11-26 3:31 ` Gao, Liming
2018-11-26 11:34 ` Laszlo Ersek
2018-11-22 16:12 ` Laszlo Ersek
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181122052153.89464-2-siyuan.fu@intel.com \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox