From: Pete Batard <pete@akeo.ie>
To: edk2-devel@lists.01.org
Subject: [PATCH v2 edk2-platforms 14/20] Platform/Broadcom/RPi3: Add NV Storage driver
Date: Mon, 10 Dec 2018 12:38:47 +0000 [thread overview]
Message-ID: <20181210123853.4864-15-pete@akeo.ie> (raw)
In-Reply-To: <20181210123853.4864-1-pete@akeo.ie>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Pete Batard <pete@akeo.ie>
---
Platform/Broadcom/Bcm283x/Drivers/VarBlockServiceDxe/FileIo.c | 196 ++++
Platform/Broadcom/Bcm283x/Drivers/VarBlockServiceDxe/FvbInfo.c | 118 +++
Platform/Broadcom/Bcm283x/Drivers/VarBlockServiceDxe/VarBlockService.c | 984 ++++++++++++++++++++
Platform/Broadcom/Bcm283x/Drivers/VarBlockServiceDxe/VarBlockService.h | 217 +++++
Platform/Broadcom/Bcm283x/Drivers/VarBlockServiceDxe/VarBlockServiceDxe.c | 334 +++++++
Platform/Broadcom/Bcm283x/Drivers/VarBlockServiceDxe/VarBlockServiceDxe.inf | 93 ++
6 files changed, 1942 insertions(+)
diff --git a/Platform/Broadcom/Bcm283x/Drivers/VarBlockServiceDxe/FileIo.c b/Platform/Broadcom/Bcm283x/Drivers/VarBlockServiceDxe/FileIo.c
new file mode 100644
index 000000000000..961de586c78b
--- /dev/null
+++ b/Platform/Broadcom/Bcm283x/Drivers/VarBlockServiceDxe/FileIo.c
@@ -0,0 +1,196 @@
+/** @file
+ *
+ * Copyright (c) 2018, Andrei Warkentin <andrey.warkentin@gmail.com>
+ * Copyright (c) 2007-2009, Intel Corporation. All rights reserved.
+ *
+ * This program and the accompanying materials
+ * are licensed and made available under the terms and conditions of the BSD License
+ * which accompanies this distribution. The full text of the license may be found at
+ * http://opensource.org/licenses/bsd-license.php
+ *
+ * THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+ *
+ **/
+
+#include "VarBlockService.h"
+
+
+EFI_STATUS
+FileWrite (
+ IN EFI_FILE_PROTOCOL *File,
+ IN UINTN Offset,
+ IN UINTN Buffer,
+ IN UINTN Size
+ )
+{
+ EFI_STATUS Status;
+
+ Status = File->SetPosition (File, Offset);
+ ASSERT_EFI_ERROR (Status);
+ if (!EFI_ERROR (Status)) {
+ Status = File->Write (File, &Size, (VOID *) Buffer);
+ ASSERT_EFI_ERROR (Status);
+ }
+ return Status;
+}
+
+
+VOID
+FileClose (
+ IN EFI_FILE_PROTOCOL *File
+ )
+{
+ File->Flush (File);
+ File->Close (File);
+}
+
+
+EFI_STATUS
+FileOpen (
+ IN EFI_DEVICE_PATH_PROTOCOL *Device,
+ IN CHAR16 *MappedFile,
+ OUT EFI_FILE_PROTOCOL **File,
+ IN UINT64 OpenMode
+ )
+{
+ EFI_HANDLE Handle;
+ EFI_FILE_HANDLE Root;
+ EFI_SIMPLE_FILE_SYSTEM_PROTOCOL *Volume;
+ EFI_STATUS Status;
+
+ *File = NULL;
+
+ Status = gBS->LocateDevicePath (
+ &gEfiSimpleFileSystemProtocolGuid,
+ &Device,
+ &Handle
+ );
+
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+
+ Status = gBS->HandleProtocol (
+ Handle,
+ &gEfiSimpleFileSystemProtocolGuid,
+ (void **) &Volume
+ );
+ ASSERT_EFI_ERROR (Status);
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+
+ //
+ // Open the root directory of the volume
+ //
+ Root = NULL;
+ Status = Volume->OpenVolume (
+ Volume,
+ &Root
+ );
+ ASSERT_EFI_ERROR (Status);
+ ASSERT (Root != NULL);
+
+ //
+ // Open file
+ //
+ Status = Root->Open (
+ Root,
+ File,
+ MappedFile,
+ OpenMode,
+ 0
+ );
+ if (EFI_ERROR (Status)) {
+ *File = NULL;
+ }
+
+ //
+ // Close the Root directory
+ //
+ Root->Close (Root);
+ return Status;
+}
+
+
+EFI_STATUS
+CheckStore (
+ IN EFI_HANDLE SimpleFileSystemHandle,
+ OUT EFI_DEVICE_PATH_PROTOCOL **Device
+ )
+{
+ EFI_STATUS Status;
+ EFI_BLOCK_IO_PROTOCOL *BlkIo;
+ EFI_FILE_PROTOCOL *File;
+
+ *Device = NULL;
+ Status = gBS->HandleProtocol (
+ SimpleFileSystemHandle,
+ &gEfiBlockIoProtocolGuid,
+ (VOID*)&BlkIo
+ );
+
+ if (EFI_ERROR (Status)) {
+ goto ErrHandle;
+ }
+ if (!BlkIo->Media->MediaPresent) {
+ DEBUG ((DEBUG_ERROR, "FwhMappedFile: Media not present!\n"));
+ Status = EFI_NO_MEDIA;
+ goto ErrHandle;
+ }
+ if (BlkIo->Media->ReadOnly) {
+ DEBUG ((DEBUG_ERROR, "FwhMappedFile: Media is read-only!\n"));
+ Status = EFI_ACCESS_DENIED;
+ goto ErrHandle;
+ }
+
+ Status = FileOpen (DevicePathFromHandle (SimpleFileSystemHandle),
+ mFvInstance->MappedFile, &File,
+ EFI_FILE_MODE_READ);
+ if (EFI_ERROR (Status)) {
+ goto ErrHandle;
+ }
+
+ /* We found it! Maybe do more checks...? */
+
+ FileClose (File);
+ *Device = DuplicateDevicePath (DevicePathFromHandle (SimpleFileSystemHandle));
+
+ ASSERT (*Device != NULL);
+
+ErrHandle:
+ return Status;
+}
+
+
+EFI_STATUS
+CheckStoreExists (
+ IN EFI_DEVICE_PATH_PROTOCOL *Device
+ )
+{
+ EFI_HANDLE Handle;
+ EFI_SIMPLE_FILE_SYSTEM_PROTOCOL *Volume;
+ EFI_STATUS Status;
+
+ Status = gBS->LocateDevicePath (
+ &gEfiSimpleFileSystemProtocolGuid,
+ &Device,
+ &Handle
+ );
+
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+
+ Status = gBS->HandleProtocol (
+ Handle,
+ &gEfiSimpleFileSystemProtocolGuid,
+ (void **) &Volume
+ );
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+
+ return EFI_SUCCESS;
+}
diff --git a/Platform/Broadcom/Bcm283x/Drivers/VarBlockServiceDxe/FvbInfo.c b/Platform/Broadcom/Bcm283x/Drivers/VarBlockServiceDxe/FvbInfo.c
new file mode 100644
index 000000000000..ddfd746b0eca
--- /dev/null
+++ b/Platform/Broadcom/Bcm283x/Drivers/VarBlockServiceDxe/FvbInfo.c
@@ -0,0 +1,118 @@
+/** @file
+ *
+ * Copyright (c) 2018, Andrei Warkentin <andrey.warkentin@gmail.com>
+ * Copyright (c) 2006-2014, Intel Corporation. All rights reserved.
+ *
+ * This program and the accompanying materials
+ * are licensed and made available under the terms and conditions of the BSD License
+ * which accompanies this distribution. The full text of the license may be found at
+ * http://opensource.org/licenses/bsd-license.php
+ *
+ * THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+ *
+ **/
+
+#include <Pi/PiFirmwareVolume.h>
+#include <Guid/SystemNvDataGuid.h>
+#include <Library/BaseLib.h>
+#include <Library/PcdLib.h>
+
+typedef struct {
+ UINT64 FvLength;
+ EFI_FIRMWARE_VOLUME_HEADER FvbInfo;
+ //
+ // EFI_FV_BLOCK_MAP_ENTRY ExtraBlockMap[n];//n=0
+ //
+ EFI_FV_BLOCK_MAP_ENTRY End[1];
+} EFI_FVB_MEDIA_INFO;
+
+EFI_FVB_MEDIA_INFO mPlatformFvbMediaInfo[] = {
+ //
+ // System NvStorage FVB
+ //
+ {
+ FixedPcdGet32 (PcdFlashNvStorageVariableSize) +
+ FixedPcdGet32 (PcdFlashNvStorageFtwWorkingSize) +
+ FixedPcdGet32 (PcdFlashNvStorageFtwSpareSize) +
+ FixedPcdGet32 (PcdNvStorageEventLogSize),
+ {
+ {
+ 0,
+ }, // ZeroVector[16]
+ EFI_SYSTEM_NV_DATA_FV_GUID,
+ FixedPcdGet32 (PcdFlashNvStorageVariableSize) +
+ FixedPcdGet32 (PcdFlashNvStorageFtwWorkingSize) +
+ FixedPcdGet32 (PcdFlashNvStorageFtwSpareSize) +
+ FixedPcdGet32 (PcdNvStorageEventLogSize),
+ EFI_FVH_SIGNATURE,
+ EFI_FVB2_MEMORY_MAPPED |
+ EFI_FVB2_READ_ENABLED_CAP |
+ EFI_FVB2_READ_STATUS |
+ EFI_FVB2_WRITE_ENABLED_CAP |
+ EFI_FVB2_WRITE_STATUS |
+ EFI_FVB2_ERASE_POLARITY |
+ EFI_FVB2_ALIGNMENT_16,
+ sizeof (EFI_FIRMWARE_VOLUME_HEADER) + sizeof (EFI_FV_BLOCK_MAP_ENTRY),
+ 0, // CheckSum
+ 0, // ExtHeaderOffset
+ {
+ 0,
+ }, // Reserved[1]
+ 2, // Revision
+ {
+ {
+ (FixedPcdGet32 (PcdFlashNvStorageVariableSize) +
+ FixedPcdGet32 (PcdFlashNvStorageFtwWorkingSize) +
+ FixedPcdGet32 (PcdFlashNvStorageFtwSpareSize) +
+ FixedPcdGet32 (PcdNvStorageEventLogSize)) /
+ FixedPcdGet32 (PcdFirmwareBlockSize),
+ FixedPcdGet32 (PcdFirmwareBlockSize),
+ }
+ } // BlockMap[1]
+ },
+ {
+ {
+ 0,
+ 0
+ }
+ } // End[1]
+ }
+};
+
+
+EFI_STATUS
+GetFvbInfo (
+ IN UINT64 FvLength,
+ OUT EFI_FIRMWARE_VOLUME_HEADER **FvbInfo
+ )
+{
+ STATIC BOOLEAN Checksummed = FALSE;
+ UINTN Index;
+
+ if (!Checksummed) {
+ for (Index = 0;
+ Index < sizeof (mPlatformFvbMediaInfo) / sizeof (EFI_FVB_MEDIA_INFO);
+ Index += 1) {
+ UINT16 Checksum;
+ mPlatformFvbMediaInfo[Index].FvbInfo.Checksum = 0;
+ Checksum = CalculateCheckSum16 (
+ (UINT16*) &mPlatformFvbMediaInfo[Index].FvbInfo,
+ mPlatformFvbMediaInfo[Index].FvbInfo.HeaderLength
+ );
+ mPlatformFvbMediaInfo[Index].FvbInfo.Checksum = Checksum;
+ }
+ Checksummed = TRUE;
+ }
+
+ for (Index = 0;
+ Index < sizeof (mPlatformFvbMediaInfo) / sizeof (EFI_FVB_MEDIA_INFO);
+ Index += 1) {
+ if (mPlatformFvbMediaInfo[Index].FvLength == FvLength) {
+ *FvbInfo = &mPlatformFvbMediaInfo[Index].FvbInfo;
+ return EFI_SUCCESS;
+ }
+ }
+
+ return EFI_NOT_FOUND;
+}
diff --git a/Platform/Broadcom/Bcm283x/Drivers/VarBlockServiceDxe/VarBlockService.c b/Platform/Broadcom/Bcm283x/Drivers/VarBlockServiceDxe/VarBlockService.c
new file mode 100644
index 000000000000..7ff9e90c0207
--- /dev/null
+++ b/Platform/Broadcom/Bcm283x/Drivers/VarBlockServiceDxe/VarBlockService.c
@@ -0,0 +1,984 @@
+/** @file
+ *
+ * Copyright (c) 2018, Andrei Warkentin <andrey.warkentin@gmail.com>
+ * Copyright (c) 2006-2014, Intel Corporation. All rights reserved.
+ *
+ * This program and the accompanying materials
+ * are licensed and made available under the terms and conditions of the BSD License
+ * which accompanies this distribution. The full text of the license may be found at
+ * http://opensource.org/licenses/bsd-license.php
+ *
+ * THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+ *
+ **/
+
+#include <Protocol/DevicePath.h>
+#include <Protocol/FirmwareVolumeBlock.h>
+
+#include <Library/BaseLib.h>
+#include <Library/BaseMemoryLib.h>
+#include <Library/DebugLib.h>
+#include <Library/DevicePathLib.h>
+#include <Library/DxeServicesTableLib.h>
+#include <Library/MemoryAllocationLib.h>
+#include <Library/UefiBootServicesTableLib.h>
+
+#include "VarBlockService.h"
+
+#define EFI_FVB2_STATUS \
+ (EFI_FVB2_READ_STATUS | EFI_FVB2_WRITE_STATUS | EFI_FVB2_LOCK_STATUS)
+
+EFI_FW_VOL_INSTANCE *mFvInstance;
+
+FV_MEMMAP_DEVICE_PATH mFvMemmapDevicePathTemplate = {
+ {
+ {
+ HARDWARE_DEVICE_PATH,
+ HW_MEMMAP_DP,
+ {
+ (UINT8)(sizeof (MEMMAP_DEVICE_PATH)),
+ (UINT8)(sizeof (MEMMAP_DEVICE_PATH) >> 8)
+ }
+ },
+ EfiMemoryMappedIO,
+ (EFI_PHYSICAL_ADDRESS) 0,
+ (EFI_PHYSICAL_ADDRESS) 0,
+ },
+ {
+ END_DEVICE_PATH_TYPE,
+ END_ENTIRE_DEVICE_PATH_SUBTYPE,
+ {
+ END_DEVICE_PATH_LENGTH,
+ 0
+ }
+ }
+};
+
+FV_PIWG_DEVICE_PATH mFvPIWGDevicePathTemplate = {
+ {
+ {
+ MEDIA_DEVICE_PATH,
+ MEDIA_PIWG_FW_VOL_DP,
+ {
+ (UINT8)(sizeof (MEDIA_FW_VOL_DEVICE_PATH)),
+ (UINT8)(sizeof (MEDIA_FW_VOL_DEVICE_PATH) >> 8)
+ }
+ },
+ { 0 }
+ },
+ {
+ END_DEVICE_PATH_TYPE,
+ END_ENTIRE_DEVICE_PATH_SUBTYPE,
+ {
+ END_DEVICE_PATH_LENGTH,
+ 0
+ }
+ }
+};
+
+EFI_FW_VOL_BLOCK_DEVICE mFvbDeviceTemplate = {
+ NULL,
+ {
+ FvbProtocolGetAttributes,
+ FvbProtocolSetAttributes,
+ FvbProtocolGetPhysicalAddress,
+ FvbProtocolGetBlockSize,
+ FvbProtocolRead,
+ FvbProtocolWrite,
+ FvbProtocolEraseBlocks,
+ NULL
+ }
+};
+
+
+EFI_STATUS
+VarStoreWrite (
+ IN UINTN Address,
+ IN OUT UINTN *NumBytes,
+ IN UINT8 *Buffer
+ )
+{
+ CopyMem ((VOID *) Address, Buffer, *NumBytes);
+ mFvInstance->Dirty = TRUE;
+
+ return EFI_SUCCESS;
+}
+
+
+EFI_STATUS
+VarStoreErase (
+ IN UINTN Address,
+ IN UINTN LbaLength
+ )
+{
+ SetMem ((VOID *)Address, LbaLength, 0xff);
+ mFvInstance->Dirty = TRUE;
+
+ return EFI_SUCCESS;
+}
+
+
+EFI_STATUS
+FvbGetVolumeAttributes (
+ OUT EFI_FVB_ATTRIBUTES_2 *Attributes
+ )
+{
+ *Attributes = mFvInstance->VolumeHeader->Attributes;
+ return EFI_SUCCESS;
+}
+
+
+EFI_STATUS
+FvbGetLbaAddress (
+ IN EFI_LBA Lba,
+ OUT UINTN *LbaAddress,
+ OUT UINTN *LbaLength,
+ OUT UINTN *NumOfBlocks
+ )
+/*++
+
+ Routine Description:
+ Retrieves the starting address of an LBA in an FV
+
+ Arguments:
+ Lba - The logical block address
+ LbaAddress - On output, contains the physical starting address
+ of the Lba
+ LbaLength - On output, contains the length of the block
+ NumOfBlocks - A pointer to a caller allocated UINTN in which the
+ number of consecutive blocks starting with Lba is
+ returned. All blocks in this range have a size of
+ BlockSize
+
+ Returns:
+ EFI_SUCCESS
+ EFI_INVALID_PARAMETER
+
+--*/
+{
+ UINT32 NumBlocks;
+ UINT32 BlockLength;
+ UINTN Offset;
+ EFI_LBA StartLba;
+ EFI_LBA NextLba;
+ EFI_FV_BLOCK_MAP_ENTRY *BlockMap;
+
+ StartLba = 0;
+ Offset = 0;
+ BlockMap = &(mFvInstance->VolumeHeader->BlockMap[0]);
+
+ //
+ // Parse the blockmap of the FV to find which map entry the Lba belongs to.
+ //
+ while (TRUE) {
+ NumBlocks = BlockMap->NumBlocks;
+ BlockLength = BlockMap->Length;
+
+ if (NumBlocks == 0 || BlockLength == 0) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ NextLba = StartLba + NumBlocks;
+
+ //
+ // The map entry found.
+ //
+ if (Lba >= StartLba && Lba < NextLba) {
+ Offset = Offset + (UINTN) MultU64x32 ((Lba - StartLba), BlockLength);
+ if (LbaAddress != NULL) {
+ *LbaAddress = mFvInstance->FvBase + Offset;
+ }
+
+ if (LbaLength != NULL) {
+ *LbaLength = BlockLength;
+ }
+
+ if (NumOfBlocks != NULL) {
+ *NumOfBlocks = (UINTN) (NextLba - Lba);
+ }
+
+ return EFI_SUCCESS;
+ }
+
+ StartLba = NextLba;
+ Offset = Offset + NumBlocks * BlockLength;
+ BlockMap++;
+ }
+}
+
+
+EFI_STATUS
+FvbEraseBlock (
+ IN EFI_LBA Lba
+ )
+/*++
+
+Routine Description:
+ Erases and initializes a firmware volume block
+
+Arguments:
+ Lba - The logical block index to be erased
+
+Returns:
+ EFI_SUCCESS - The erase request was successfully completed
+ EFI_ACCESS_DENIED - The firmware volume is in the WriteDisabled state
+ EFI_DEVICE_ERROR - The block device is not functioning correctly and
+ could not be written. Firmware device may have been
+ partially erased
+ EFI_INVALID_PARAMETER
+
+--*/
+{
+ EFI_FVB_ATTRIBUTES_2 Attributes;
+ UINTN LbaAddress;
+ UINTN LbaLength;
+ EFI_STATUS Status;
+
+ //
+ // Check if the FV is write enabled
+ //
+ FvbGetVolumeAttributes (&Attributes);
+
+ if ((Attributes & EFI_FVB2_WRITE_STATUS) == 0) {
+ return EFI_ACCESS_DENIED;
+ }
+ //
+ // Get the starting address of the block for erase. For debug reasons,
+ // LbaWriteAddress may not be the same as LbaAddress.
+ //
+ Status = FvbGetLbaAddress (Lba, &LbaAddress, &LbaLength, NULL);
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+
+ return VarStoreErase (
+ LbaAddress,
+ LbaLength
+ );
+}
+
+
+EFI_STATUS
+FvbSetVolumeAttributes (
+ IN OUT EFI_FVB_ATTRIBUTES_2 *Attributes
+ )
+/*++
+
+ Routine Description:
+ Modifies the current settings of the firmware volume according to the
+ input parameter, and returns the new setting of the volume
+
+ Arguments:
+ Attributes - On input, it is a pointer to EFI_FVB_ATTRIBUTES_2
+ containing the desired firmware volume settings.
+ On successful return, it contains the new setting.
+
+ Returns:
+ EFI_SUCCESS - Successfully returns
+ EFI_ACCESS_DENIED - The volume setting is locked and cannot be modified
+ EFI_INVALID_PARAMETER
+
+--*/
+{
+ EFI_FVB_ATTRIBUTES_2 OldAttributes;
+ EFI_FVB_ATTRIBUTES_2 *AttribPtr;
+ UINT32 Capabilities;
+ UINT32 OldStatus;
+ UINT32 NewStatus;
+ EFI_FVB_ATTRIBUTES_2 UnchangedAttributes;
+
+ AttribPtr =
+ (EFI_FVB_ATTRIBUTES_2 *) &(mFvInstance->VolumeHeader->Attributes);
+ OldAttributes = *AttribPtr;
+ Capabilities = OldAttributes & (EFI_FVB2_READ_DISABLED_CAP | \
+ EFI_FVB2_READ_ENABLED_CAP | \
+ EFI_FVB2_WRITE_DISABLED_CAP | \
+ EFI_FVB2_WRITE_ENABLED_CAP | \
+ EFI_FVB2_LOCK_CAP \
+ );
+ OldStatus = OldAttributes & EFI_FVB2_STATUS;
+ NewStatus = *Attributes & EFI_FVB2_STATUS;
+
+ UnchangedAttributes = EFI_FVB2_READ_DISABLED_CAP | \
+ EFI_FVB2_READ_ENABLED_CAP | \
+ EFI_FVB2_WRITE_DISABLED_CAP | \
+ EFI_FVB2_WRITE_ENABLED_CAP | \
+ EFI_FVB2_LOCK_CAP | \
+ EFI_FVB2_STICKY_WRITE | \
+ EFI_FVB2_MEMORY_MAPPED | \
+ EFI_FVB2_ERASE_POLARITY | \
+ EFI_FVB2_READ_LOCK_CAP | \
+ EFI_FVB2_WRITE_LOCK_CAP | \
+ EFI_FVB2_ALIGNMENT;
+
+ //
+ // Some attributes of FV is read only can *not* be set.
+ //
+ if ((OldAttributes & UnchangedAttributes) ^
+ (*Attributes & UnchangedAttributes)) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ //
+ // If firmware volume is locked, no status bit can be updated.
+ //
+ if (OldAttributes & EFI_FVB2_LOCK_STATUS) {
+ if (OldStatus ^ NewStatus) {
+ return EFI_ACCESS_DENIED;
+ }
+ }
+
+ //
+ // Test read disable.
+ //
+ if ((Capabilities & EFI_FVB2_READ_DISABLED_CAP) == 0) {
+ if ((NewStatus & EFI_FVB2_READ_STATUS) == 0) {
+ return EFI_INVALID_PARAMETER;
+ }
+ }
+
+ //
+ // Test read enable.
+ //
+ if ((Capabilities & EFI_FVB2_READ_ENABLED_CAP) == 0) {
+ if (NewStatus & EFI_FVB2_READ_STATUS) {
+ return EFI_INVALID_PARAMETER;
+ }
+ }
+
+ //
+ // Test write disable.
+ //
+ if ((Capabilities & EFI_FVB2_WRITE_DISABLED_CAP) == 0) {
+ if ((NewStatus & EFI_FVB2_WRITE_STATUS) == 0) {
+ return EFI_INVALID_PARAMETER;
+ }
+ }
+
+ //
+ // Test write enable.
+ //
+ if ((Capabilities & EFI_FVB2_WRITE_ENABLED_CAP) == 0) {
+ if (NewStatus & EFI_FVB2_WRITE_STATUS) {
+ return EFI_INVALID_PARAMETER;
+ }
+ }
+
+ //
+ // Test lock.
+ //
+ if ((Capabilities & EFI_FVB2_LOCK_CAP) == 0) {
+ if (NewStatus & EFI_FVB2_LOCK_STATUS) {
+ return EFI_INVALID_PARAMETER;
+ }
+ }
+
+ *AttribPtr = (*AttribPtr) & (0xFFFFFFFF & (~EFI_FVB2_STATUS));
+ *AttribPtr = (*AttribPtr) | NewStatus;
+ *Attributes = *AttribPtr;
+
+ return EFI_SUCCESS;
+}
+
+
+EFI_STATUS
+EFIAPI
+FvbProtocolGetPhysicalAddress (
+ IN CONST EFI_FIRMWARE_VOLUME_BLOCK_PROTOCOL *This,
+ OUT EFI_PHYSICAL_ADDRESS *Address
+ )
+{
+ *Address = mFvInstance->FvBase;
+ return EFI_SUCCESS;
+}
+
+
+EFI_STATUS
+EFIAPI
+FvbProtocolGetBlockSize (
+ IN CONST EFI_FIRMWARE_VOLUME_BLOCK_PROTOCOL *This,
+ IN CONST EFI_LBA Lba,
+ OUT UINTN *BlockSize,
+ OUT UINTN *NumOfBlocks
+ )
+/*++
+
+ Routine Description:
+ Retrieve the size of a logical block
+
+ Arguments:
+ This - Calling context
+ Lba - Indicates which block to return the size for.
+ BlockSize - A pointer to a caller allocated UINTN in which
+ the size of the block is returned
+ NumOfBlocks - a pointer to a caller allocated UINTN in which the
+ number of consecutive blocks starting with Lba is
+ returned. All blocks in this range have a size of
+ BlockSize
+
+ Returns:
+ EFI_SUCCESS - The firmware volume was read successfully and
+ contents are in Buffer
+
+--*/
+{
+ return FvbGetLbaAddress (
+ Lba,
+ NULL,
+ BlockSize,
+ NumOfBlocks
+ );
+}
+
+
+EFI_STATUS
+EFIAPI
+FvbProtocolGetAttributes (
+ IN CONST EFI_FIRMWARE_VOLUME_BLOCK_PROTOCOL *This,
+ OUT EFI_FVB_ATTRIBUTES_2 *Attributes
+ )
+/*++
+
+ Routine Description:
+ Retrieves Volume attributes. No polarity translations are done.
+
+ Arguments:
+ This - Calling context
+ Attributes - output buffer which contains attributes
+
+ Returns:
+ EFI_SUCCESS - Successfully returns
+
+--*/
+{
+ return FvbGetVolumeAttributes (Attributes);
+}
+
+
+EFI_STATUS
+EFIAPI
+FvbProtocolSetAttributes (
+ IN CONST EFI_FIRMWARE_VOLUME_BLOCK_PROTOCOL *This,
+ IN OUT EFI_FVB_ATTRIBUTES_2 *Attributes
+ )
+/*++
+
+ Routine Description:
+ Sets Volume attributes. No polarity translations are done.
+
+ Arguments:
+ This - Calling context
+ Attributes - output buffer which contains attributes
+
+ Returns:
+ EFI_SUCCESS - Successfully returns
+
+--*/
+{
+ return FvbSetVolumeAttributes (Attributes);
+}
+
+
+EFI_STATUS
+EFIAPI
+FvbProtocolEraseBlocks (
+ IN CONST EFI_FIRMWARE_VOLUME_BLOCK_PROTOCOL*This,
+ ...
+ )
+/*++
+
+ Routine Description:
+
+ The EraseBlock() function erases one or more blocks as denoted by the
+ variable argument list. The entire parameter list of blocks must be
+ verified prior to erasing any blocks. If a block is requested that does
+ not exist within the associated firmware volume (it has a larger index than
+ the last block of the firmware volume), the EraseBlock() function must
+ return EFI_INVALID_PARAMETER without modifying the contents of the firmware
+ volume.
+
+ Arguments:
+ This - Calling context
+ ... - Starting LBA followed by Number of Lba to erase.
+ a -1 to terminate the list.
+
+ Returns:
+ EFI_SUCCESS - The erase request was successfully completed
+ EFI_ACCESS_DENIED - The firmware volume is in the WriteDisabled state
+ EFI_DEVICE_ERROR - The block device is not functioning correctly and
+ could not be written. Firmware device may have been
+ partially erased
+
+--*/
+{
+ UINTN NumOfBlocks;
+ VA_LIST args;
+ EFI_LBA StartingLba;
+ UINTN NumOfLba;
+ EFI_STATUS Status;
+
+ NumOfBlocks = mFvInstance->NumOfBlocks;
+ VA_START (args, This);
+
+ do {
+ StartingLba = VA_ARG (args, EFI_LBA);
+ if (StartingLba == EFI_LBA_LIST_TERMINATOR) {
+ break;
+ }
+
+ NumOfLba = VA_ARG (args, UINTN);
+
+ if ((NumOfLba == 0) || ((StartingLba + NumOfLba) > NumOfBlocks)) {
+ VA_END (args);
+ return EFI_INVALID_PARAMETER;
+ }
+ } while (1);
+
+ VA_END (args);
+
+ VA_START (args, This);
+ do {
+ StartingLba = VA_ARG (args, EFI_LBA);
+ if (StartingLba == EFI_LBA_LIST_TERMINATOR) {
+ break;
+ }
+
+ NumOfLba = VA_ARG (args, UINTN);
+
+ while (NumOfLba > 0) {
+ Status = FvbEraseBlock (StartingLba);
+ if (EFI_ERROR (Status)) {
+ VA_END (args);
+ return Status;
+ }
+
+ StartingLba++;
+ NumOfLba--;
+ }
+
+ } while (1);
+
+ VA_END (args);
+
+ return EFI_SUCCESS;
+}
+
+
+EFI_STATUS
+EFIAPI
+FvbProtocolWrite (
+ IN CONST EFI_FIRMWARE_VOLUME_BLOCK_PROTOCOL *This,
+ IN EFI_LBA Lba,
+ IN UINTN Offset,
+ IN OUT UINTN *NumBytes,
+ IN UINT8 *Buffer
+ )
+/*++
+
+ Routine Description:
+
+ Writes data beginning at Lba:Offset from FV. The write terminates either
+ when *NumBytes of data have been written, or when a block boundary is
+ reached. *NumBytes is updated to reflect the actual number of bytes
+ written. The write opertion does not include erase. This routine will
+ attempt to write only the specified bytes. If the writes do not stick,
+ it will return an error.
+
+ Arguments:
+ This - Calling context
+ Lba - Block in which to begin write
+ Offset - Offset in the block at which to begin write
+ NumBytes - On input, indicates the requested write size. On
+ output, indicates the actual number of bytes
+ written
+ Buffer - Buffer containing source data for the write.
+
+ Returns:
+ EFI_SUCCESS - The firmware volume was written successfully
+ EFI_BAD_BUFFER_SIZE - Write attempted across a LBA boundary. On output,
+ NumBytes contains the total number of bytes
+ actually written
+ EFI_ACCESS_DENIED - The firmware volume is in the WriteDisabled state
+ EFI_DEVICE_ERROR - The block device is not functioning correctly and
+ could not be written
+ EFI_INVALID_PARAMETER - NumBytes or Buffer are NULL
+
+--*/
+{
+ EFI_FVB_ATTRIBUTES_2 Attributes;
+ UINTN LbaAddress;
+ UINTN LbaLength;
+ EFI_STATUS Status;
+ EFI_STATUS ReturnStatus;
+
+ //
+ // Check for invalid conditions.
+ //
+ if ((NumBytes == NULL) || (Buffer == NULL)) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ if (*NumBytes == 0) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ Status = FvbGetLbaAddress (Lba, &LbaAddress, &LbaLength, NULL);
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+
+ //
+ // Check if the FV is write enabled.
+ //
+ FvbGetVolumeAttributes (&Attributes);
+
+ if ((Attributes & EFI_FVB2_WRITE_STATUS) == 0) {
+ return EFI_ACCESS_DENIED;
+ }
+
+ //
+ // Perform boundary checks and adjust NumBytes.
+ //
+ if (Offset > LbaLength) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ if (LbaLength < (*NumBytes + Offset)) {
+ *NumBytes = (UINT32) (LbaLength - Offset);
+ Status = EFI_BAD_BUFFER_SIZE;
+ }
+
+ ReturnStatus = VarStoreWrite (
+ LbaAddress + Offset,
+ NumBytes,
+ Buffer
+ );
+ if (EFI_ERROR (ReturnStatus)) {
+ return ReturnStatus;
+ }
+
+ return Status;
+}
+
+
+EFI_STATUS
+EFIAPI
+FvbProtocolRead (
+ IN CONST EFI_FIRMWARE_VOLUME_BLOCK_PROTOCOL *This,
+ IN CONST EFI_LBA Lba,
+ IN CONST UINTN Offset,
+ IN OUT UINTN *NumBytes,
+ IN UINT8 *Buffer
+ )
+/*++
+
+ Routine Description:
+
+ Reads data beginning at Lba:Offset from FV. The Read terminates either
+ when *NumBytes of data have been read, or when a block boundary is
+ reached. *NumBytes is updated to reflect the actual number of bytes
+ written. The write opertion does not include erase. This routine will
+ attempt to write only the specified bytes. If the writes do not stick,
+ it will return an error.
+
+ Arguments:
+ This - Calling context
+ Lba - Block in which to begin Read
+ Offset - Offset in the block at which to begin Read
+ NumBytes - On input, indicates the requested write size. On
+ output, indicates the actual number of bytes Read
+ Buffer - Buffer containing source data for the Read.
+
+ Returns:
+ EFI_SUCCESS - The firmware volume was read successfully and
+ contents are in Buffer
+ EFI_BAD_BUFFER_SIZE - Read attempted across a LBA boundary. On output,
+ NumBytes contains the total number of bytes
+ returned in Buffer
+ EFI_ACCESS_DENIED - The firmware volume is in the ReadDisabled state
+ EFI_DEVICE_ERROR - The block device is not functioning correctly and
+ could not be read
+ EFI_INVALID_PARAMETER - NumBytes or Buffer are NULL
+
+--*/
+{
+ EFI_FVB_ATTRIBUTES_2 Attributes;
+ UINTN LbaAddress;
+ UINTN LbaLength;
+ EFI_STATUS Status;
+
+ //
+ // Check for invalid conditions.
+ //
+ if ((NumBytes == NULL) || (Buffer == NULL)) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ if (*NumBytes == 0) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ Status = FvbGetLbaAddress (Lba, &LbaAddress, &LbaLength, NULL);
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+
+ //
+ // Check if the FV is read enabled.
+ //
+ FvbGetVolumeAttributes (&Attributes);
+
+ if ((Attributes & EFI_FVB2_READ_STATUS) == 0) {
+ return EFI_ACCESS_DENIED;
+ }
+
+ //
+ // Perform boundary checks and adjust NumBytes.
+ //
+ if (Offset > LbaLength) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ if (LbaLength < (*NumBytes + Offset)) {
+ *NumBytes = (UINT32) (LbaLength - Offset);
+ Status = EFI_BAD_BUFFER_SIZE;
+ }
+
+ CopyMem (Buffer, (VOID *) (LbaAddress + Offset), (UINTN) *NumBytes);
+
+ return Status;
+}
+
+
+EFI_STATUS
+ValidateFvHeader (
+ IN EFI_FIRMWARE_VOLUME_HEADER *FwVolHeader
+ )
+/*++
+
+ Routine Description:
+ Check the integrity of firmware volume header
+
+ Arguments:
+ FwVolHeader - A pointer to a firmware volume header
+
+ Returns:
+ EFI_SUCCESS - The firmware volume is consistent
+ EFI_NOT_FOUND - The firmware volume has corrupted. So it is not an
+ FV
+
+--*/
+{
+ UINT16 Checksum;
+
+ //
+ // Verify the header revision, header signature, length
+ // Length of FvBlock cannot be 2**64-1
+ // HeaderLength cannot be an odd number.
+ //
+ if ((FwVolHeader->Revision != EFI_FVH_REVISION) ||
+ (FwVolHeader->Signature != EFI_FVH_SIGNATURE) ||
+ (FwVolHeader->FvLength == ((UINTN) -1)) ||
+ ((FwVolHeader->HeaderLength & 0x01) != 0)
+ ) {
+ return EFI_NOT_FOUND;
+ }
+
+ //
+ // Verify the header checksum.
+ //
+
+ Checksum = CalculateSum16 ((UINT16 *) FwVolHeader,
+ FwVolHeader->HeaderLength);
+ if (Checksum != 0) {
+ UINT16 Expected;
+
+ Expected =
+ (UINT16) (((UINTN) FwVolHeader->Checksum + 0x10000 - Checksum) & 0xffff);
+
+ DEBUG ((DEBUG_INFO, "FV@%p Checksum is 0x%x, expected 0x%x\n",
+ FwVolHeader, FwVolHeader->Checksum, Expected));
+ return EFI_NOT_FOUND;
+ }
+
+ return EFI_SUCCESS;
+}
+
+
+EFI_STATUS
+EFIAPI
+FvbInitialize (
+ IN EFI_HANDLE ImageHandle,
+ IN EFI_SYSTEM_TABLE *SystemTable
+ )
+/*++
+
+ Routine Description:
+ This function does common initialization for FVB services
+
+ Arguments:
+
+ Returns:
+
+--*/
+{
+ EFI_STATUS Status;
+ UINT32 BufferSize;
+ EFI_FV_BLOCK_MAP_ENTRY *PtrBlockMapEntry;
+ EFI_FW_VOL_BLOCK_DEVICE *FvbDevice;
+ UINT32 MaxLbaSize;
+ EFI_PHYSICAL_ADDRESS BaseAddress;
+ UINTN Length;
+ UINTN NumOfBlocks;
+ RETURN_STATUS PcdStatus;
+ UINTN StartOffset;
+
+ BaseAddress = PcdGet32 (PcdNvStorageVariableBase);
+ Length = (FixedPcdGet32 (PcdFlashNvStorageVariableSize) +
+ FixedPcdGet32 (PcdFlashNvStorageFtwWorkingSize) +
+ FixedPcdGet32 (PcdFlashNvStorageFtwSpareSize) +
+ FixedPcdGet32 (PcdNvStorageEventLogSize));
+ StartOffset = BaseAddress - FixedPcdGet64 (PcdFdBaseAddress);
+
+ BufferSize = sizeof (EFI_FW_VOL_INSTANCE);
+
+ mFvInstance = AllocateRuntimeZeroPool (BufferSize);
+ if (mFvInstance == NULL) {
+ return EFI_OUT_OF_RESOURCES;
+ }
+
+ mFvInstance->FvBase = (UINTN) BaseAddress;
+ mFvInstance->FvLength = (UINTN) Length;
+ mFvInstance->Offset = StartOffset;
+ /*
+ * Should I parse config.txt instead and find the real name?
+ */
+ mFvInstance->MappedFile = L"RPI_EFI.FD";
+
+ Status = ValidateFvHeader (mFvInstance->VolumeHeader);
+ if (!EFI_ERROR (Status)) {
+ if (mFvInstance->VolumeHeader->FvLength != Length ||
+ mFvInstance->VolumeHeader->BlockMap[0].Length !=
+ PcdGet32 (PcdFirmwareBlockSize)) {
+ Status = EFI_VOLUME_CORRUPTED;
+ }
+ }
+ if (EFI_ERROR (Status)) {
+ EFI_FIRMWARE_VOLUME_HEADER *GoodFwVolHeader;
+ UINTN WriteLength;
+
+ DEBUG ((DEBUG_INFO,
+ "Variable FV header is not valid. It will be reinitialized.\n"));
+
+ //
+ // Get FvbInfo
+ //
+ Status = GetFvbInfo (Length, &GoodFwVolHeader);
+ ASSERT_EFI_ERROR (Status);
+
+ //
+ // Erase all the blocks
+ //
+ Status = VarStoreErase ((UINTN) mFvInstance->FvBase,
+ mFvInstance->FvLength);
+ ASSERT_EFI_ERROR (Status);
+ //
+ // Write good FV header
+ //
+ WriteLength = GoodFwVolHeader->HeaderLength;
+ Status = VarStoreWrite((UINTN) mFvInstance->FvBase,
+ &WriteLength,
+ (UINT8*) GoodFwVolHeader);
+ ASSERT_EFI_ERROR (Status);
+ ASSERT (WriteLength == GoodFwVolHeader->HeaderLength);
+
+ Status = ValidateFvHeader (mFvInstance->VolumeHeader);
+ ASSERT_EFI_ERROR (Status);
+ }
+
+ MaxLbaSize = 0;
+ NumOfBlocks = 0;
+ for (PtrBlockMapEntry = mFvInstance->VolumeHeader->BlockMap;
+ PtrBlockMapEntry->NumBlocks != 0;
+ PtrBlockMapEntry++) {
+ //
+ // Get the maximum size of a block.
+ //
+ if (MaxLbaSize < PtrBlockMapEntry->Length) {
+ MaxLbaSize = PtrBlockMapEntry->Length;
+ }
+
+ NumOfBlocks = NumOfBlocks + PtrBlockMapEntry->NumBlocks;
+ }
+
+ //
+ // The total number of blocks in the FV.
+ //
+ mFvInstance->NumOfBlocks = NumOfBlocks;
+
+ //
+ // Add a FVB Protocol Instance
+ //
+ FvbDevice = AllocateRuntimePool (sizeof (EFI_FW_VOL_BLOCK_DEVICE));
+ ASSERT (FvbDevice != NULL);
+ CopyMem (FvbDevice, &mFvbDeviceTemplate, sizeof (EFI_FW_VOL_BLOCK_DEVICE));
+
+ //
+ // Set up the devicepath
+ //
+ if (mFvInstance->VolumeHeader->ExtHeaderOffset == 0) {
+ FV_MEMMAP_DEVICE_PATH *FvMemmapDevicePath;
+
+ //
+ // FV does not contains extension header, then produce MEMMAP_DEVICE_PATH
+ //
+ FvMemmapDevicePath = AllocateCopyPool (sizeof (FV_MEMMAP_DEVICE_PATH),
+ &mFvMemmapDevicePathTemplate);
+ FvMemmapDevicePath->MemMapDevPath.StartingAddress = mFvInstance->FvBase;
+ FvMemmapDevicePath->MemMapDevPath.EndingAddress = mFvInstance->FvBase +
+ mFvInstance->FvLength - 1;
+ FvbDevice->DevicePath = (EFI_DEVICE_PATH_PROTOCOL *)FvMemmapDevicePath;
+ } else {
+ FV_PIWG_DEVICE_PATH *FvPiwgDevicePath;
+
+ FvPiwgDevicePath = AllocateCopyPool (sizeof (FV_PIWG_DEVICE_PATH),
+ &mFvPIWGDevicePathTemplate);
+ CopyGuid (
+ &FvPiwgDevicePath->FvDevPath.FvName,
+ (GUID *)(UINTN)(mFvInstance->FvBase +
+ mFvInstance->VolumeHeader->ExtHeaderOffset)
+ );
+ FvbDevice->DevicePath = (EFI_DEVICE_PATH_PROTOCOL *)FvPiwgDevicePath;
+ }
+
+ //
+ // Module type specific hook.
+ //
+ InstallProtocolInterfaces (FvbDevice);
+
+ //
+ // Set several PCD values to point to flash.
+ //
+ PcdStatus = PcdSet64S (
+ PcdFlashNvStorageVariableBase64,
+ (UINTN) PcdGet32 (PcdNvStorageVariableBase)
+ );
+ ASSERT_RETURN_ERROR (PcdStatus);
+ PcdStatus = PcdSet32S (
+ PcdFlashNvStorageFtwWorkingBase,
+ PcdGet32 (PcdNvStorageFtwWorkingBase)
+ );
+ ASSERT_RETURN_ERROR (PcdStatus);
+ PcdStatus = PcdSet32S (
+ PcdFlashNvStorageFtwSpareBase,
+ PcdGet32 (PcdNvStorageFtwSpareBase)
+ );
+ ASSERT_RETURN_ERROR (PcdStatus);
+
+ InstallFSNotifyHandler ();
+ InstallDumpVarEventHandlers ();
+ InstallVirtualAddressChangeHandler ();
+
+ return EFI_SUCCESS;
+}
diff --git a/Platform/Broadcom/Bcm283x/Drivers/VarBlockServiceDxe/VarBlockService.h b/Platform/Broadcom/Bcm283x/Drivers/VarBlockServiceDxe/VarBlockService.h
new file mode 100644
index 000000000000..3596c4ac55b9
--- /dev/null
+++ b/Platform/Broadcom/Bcm283x/Drivers/VarBlockServiceDxe/VarBlockService.h
@@ -0,0 +1,217 @@
+/** @file
+ *
+ * Copyright (c) 2018, Andrei Warkentin <andrey.warkentin@gmail.com>
+ * Copyright (c) 2007-2009, Intel Corporation. All rights reserved.
+ *
+ * This program and the accompanying materials
+ * are licensed and made available under the terms and conditions of the BSD License
+ * which accompanies this distribution. The full text of the license may be found at
+ * http://opensource.org/licenses/bsd-license.php
+ *
+ * THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+ *
+ **/
+
+#ifndef _FW_BLOCK_SERVICE_H
+#define _FW_BLOCK_SERVICE_H
+
+#include <Guid/EventGroup.h>
+#include <Library/DebugLib.h>
+#include <Library/DevicePathLib.h>
+#include <Library/PcdLib.h>
+#include <Library/UefiBootServicesTableLib.h>
+#include <Library/UefiRuntimeLib.h>
+#include <Protocol/DevicePath.h>
+#include <Protocol/FirmwareVolumeBlock.h>
+#include <Protocol/SimpleFileSystem.h>
+#include <Protocol/BlockIo.h>
+#include <Protocol/LoadedImage.h>
+
+typedef struct {
+ union {
+ UINTN FvBase;
+ EFI_FIRMWARE_VOLUME_HEADER *VolumeHeader;
+ };
+ UINTN FvLength;
+ UINTN Offset;
+ UINTN NumOfBlocks;
+ EFI_DEVICE_PATH_PROTOCOL *Device;
+ CHAR16 *MappedFile;
+ BOOLEAN Dirty;
+} EFI_FW_VOL_INSTANCE;
+
+extern EFI_FW_VOL_INSTANCE *mFvInstance;
+
+typedef struct {
+ MEDIA_FW_VOL_DEVICE_PATH FvDevPath;
+ EFI_DEVICE_PATH_PROTOCOL EndDevPath;
+} FV_PIWG_DEVICE_PATH;
+
+typedef struct {
+ MEMMAP_DEVICE_PATH MemMapDevPath;
+ EFI_DEVICE_PATH_PROTOCOL EndDevPath;
+} FV_MEMMAP_DEVICE_PATH;
+
+typedef struct {
+ EFI_DEVICE_PATH_PROTOCOL *DevicePath;
+ EFI_FIRMWARE_VOLUME_BLOCK_PROTOCOL FwVolBlockInstance;
+} EFI_FW_VOL_BLOCK_DEVICE;
+
+EFI_STATUS
+GetFvbInfo (
+ IN UINT64 FvLength,
+ OUT EFI_FIRMWARE_VOLUME_HEADER **FvbInfo
+ );
+
+EFI_STATUS
+FvbSetVolumeAttributes (
+ IN OUT EFI_FVB_ATTRIBUTES_2 *Attributes
+ );
+
+EFI_STATUS
+FvbGetVolumeAttributes (
+ OUT EFI_FVB_ATTRIBUTES_2 *Attributes
+ );
+
+EFI_STATUS
+FvbGetPhysicalAddress (
+ OUT EFI_PHYSICAL_ADDRESS *Address
+ );
+
+EFI_STATUS
+EFIAPI
+FvbInitialize (
+ IN EFI_HANDLE ImageHandle,
+ IN EFI_SYSTEM_TABLE *SystemTable
+ );
+
+
+VOID
+EFIAPI
+FvbClassAddressChangeEvent (
+ IN EFI_EVENT Event,
+ IN VOID *Context
+ );
+
+EFI_STATUS
+FvbGetLbaAddress (
+ IN EFI_LBA Lba,
+ OUT UINTN *LbaAddress,
+ OUT UINTN *LbaLength,
+ OUT UINTN *NumOfBlocks
+ );
+
+//
+// Protocol APIs
+//
+EFI_STATUS
+EFIAPI
+FvbProtocolGetAttributes (
+ IN CONST EFI_FIRMWARE_VOLUME_BLOCK_PROTOCOL *This,
+ OUT EFI_FVB_ATTRIBUTES_2 *Attributes
+ );
+
+EFI_STATUS
+EFIAPI
+FvbProtocolSetAttributes (
+ IN CONST EFI_FIRMWARE_VOLUME_BLOCK_PROTOCOL *This,
+ IN OUT EFI_FVB_ATTRIBUTES_2 *Attributes
+ );
+
+EFI_STATUS
+EFIAPI
+FvbProtocolGetPhysicalAddress (
+ IN CONST EFI_FIRMWARE_VOLUME_BLOCK_PROTOCOL *This,
+ OUT EFI_PHYSICAL_ADDRESS *Address
+ );
+
+EFI_STATUS
+EFIAPI
+FvbProtocolGetBlockSize (
+ IN CONST EFI_FIRMWARE_VOLUME_BLOCK_PROTOCOL *This,
+ IN CONST EFI_LBA Lba,
+ OUT UINTN *BlockSize,
+ OUT UINTN *NumOfBlocks
+ );
+
+EFI_STATUS
+EFIAPI
+FvbProtocolRead (
+ IN CONST EFI_FIRMWARE_VOLUME_BLOCK_PROTOCOL *This,
+ IN CONST EFI_LBA Lba,
+ IN CONST UINTN Offset,
+ IN OUT UINTN *NumBytes,
+ IN UINT8 *Buffer
+ );
+
+EFI_STATUS
+EFIAPI
+FvbProtocolWrite (
+ IN CONST EFI_FIRMWARE_VOLUME_BLOCK_PROTOCOL *This,
+ IN EFI_LBA Lba,
+ IN UINTN Offset,
+ IN OUT UINTN *NumBytes,
+ IN UINT8 *Buffer
+ );
+
+EFI_STATUS
+EFIAPI
+FvbProtocolEraseBlocks (
+ IN CONST EFI_FIRMWARE_VOLUME_BLOCK_PROTOCOL *This,
+ ...
+ );
+
+VOID
+InstallProtocolInterfaces (
+ IN EFI_FW_VOL_BLOCK_DEVICE *FvbDevice
+ );
+
+VOID
+InstallVirtualAddressChangeHandler (
+ VOID
+ );
+
+VOID
+InstallFSNotifyHandler (
+ VOID
+ );
+
+VOID
+InstallDumpVarEventHandlers (
+ VOID
+);
+
+EFI_STATUS
+FileWrite (
+ IN EFI_FILE_PROTOCOL *File,
+ IN UINTN Offset,
+ IN UINTN Buffer,
+ IN UINTN Size
+ );
+
+EFI_STATUS
+CheckStore (
+ IN EFI_HANDLE SimpleFileSystemHandle,
+ OUT EFI_DEVICE_PATH_PROTOCOL **Device
+ );
+
+EFI_STATUS
+CheckStoreExists (
+ IN EFI_DEVICE_PATH_PROTOCOL *Device
+ );
+
+EFI_STATUS
+FileOpen (
+ IN EFI_DEVICE_PATH_PROTOCOL *Device,
+ IN CHAR16 *MappedFile,
+ OUT EFI_FILE_PROTOCOL **File,
+ IN UINT64 OpenMode
+ );
+
+VOID
+FileClose (
+ IN EFI_FILE_PROTOCOL *File
+ );
+
+#endif
diff --git a/Platform/Broadcom/Bcm283x/Drivers/VarBlockServiceDxe/VarBlockServiceDxe.c b/Platform/Broadcom/Bcm283x/Drivers/VarBlockServiceDxe/VarBlockServiceDxe.c
new file mode 100644
index 000000000000..8c4db3dcfd59
--- /dev/null
+++ b/Platform/Broadcom/Bcm283x/Drivers/VarBlockServiceDxe/VarBlockServiceDxe.c
@@ -0,0 +1,334 @@
+/** @file
+ *
+ * Copyright (c) 2018, Andrei Warkentin <andrey.warkentin@gmail.com>
+ * Copyright (C) 2015, Red Hat, Inc.
+ * Copyright (c) 2006-2014, Intel Corporation. All rights reserved.
+ *
+ * This program and the accompanying materials
+ * are licensed and made available under the terms and conditions of the BSD License
+ * which accompanies this distribution. The full text of the license may be found at
+ * http://opensource.org/licenses/bsd-license.php
+ *
+ * THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+ *
+ **/
+
+#include "VarBlockService.h"
+
+VOID *mSFSRegistration;
+
+
+VOID
+InstallProtocolInterfaces (
+ IN EFI_FW_VOL_BLOCK_DEVICE *FvbDevice
+ )
+{
+ EFI_STATUS Status;
+ EFI_HANDLE FwbHandle;
+ EFI_FIRMWARE_VOLUME_BLOCK_PROTOCOL *OldFwbInterface;
+
+ //
+ // Find a handle with a matching device path that has supports FW Block
+ // protocol.
+ //
+ Status = gBS->LocateDevicePath (&gEfiFirmwareVolumeBlockProtocolGuid,
+ &FvbDevice->DevicePath, &FwbHandle);
+ if (EFI_ERROR (Status)) {
+ //
+ // LocateDevicePath fails so install a new interface and device path.
+ //
+ FwbHandle = NULL;
+ Status = gBS->InstallMultipleProtocolInterfaces (
+ &FwbHandle,
+ &gEfiFirmwareVolumeBlockProtocolGuid,
+ &FvbDevice->FwVolBlockInstance,
+ &gEfiDevicePathProtocolGuid,
+ FvbDevice->DevicePath,
+ NULL
+ );
+ ASSERT_EFI_ERROR (Status);
+ } else if (IsDevicePathEnd (FvbDevice->DevicePath)) {
+ //
+ // Device already exists, so reinstall the FVB protocol
+ //
+ Status = gBS->HandleProtocol (
+ FwbHandle,
+ &gEfiFirmwareVolumeBlockProtocolGuid,
+ (VOID**)&OldFwbInterface
+ );
+ ASSERT_EFI_ERROR (Status);
+
+ Status = gBS->ReinstallProtocolInterface (
+ FwbHandle,
+ &gEfiFirmwareVolumeBlockProtocolGuid,
+ OldFwbInterface,
+ &FvbDevice->FwVolBlockInstance
+ );
+ ASSERT_EFI_ERROR (Status);
+ } else {
+ //
+ // There was a FVB protocol on an End Device Path node
+ //
+ ASSERT (FALSE);
+ }
+}
+
+
+STATIC
+VOID
+EFIAPI
+FvbVirtualAddressChangeEvent (
+ IN EFI_EVENT Event,
+ IN VOID *Context
+ )
+/*++
+
+ Routine Description:
+
+ Fixup internal data so that EFI can be called in virtual mode.
+
+ Arguments:
+
+ (Standard EFI notify event - EFI_EVENT_NOTIFY)
+
+ Returns:
+
+ None
+
+--*/
+{
+ EfiConvertPointer (0x0, (VOID **) &mFvInstance->FvBase);
+ EfiConvertPointer (0x0, (VOID **) &mFvInstance->VolumeHeader);
+ EfiConvertPointer (0x0, (VOID **) &mFvInstance);
+}
+
+
+VOID
+InstallVirtualAddressChangeHandler (
+ VOID
+ )
+{
+ EFI_STATUS Status;
+ EFI_EVENT VirtualAddressChangeEvent;
+
+ Status = gBS->CreateEventEx (
+ EVT_NOTIFY_SIGNAL,
+ TPL_NOTIFY,
+ FvbVirtualAddressChangeEvent,
+ NULL,
+ &gEfiEventVirtualAddressChangeGuid,
+ &VirtualAddressChangeEvent
+ );
+ ASSERT_EFI_ERROR (Status);
+}
+
+
+STATIC
+EFI_STATUS
+DoDump(
+ IN EFI_DEVICE_PATH_PROTOCOL *Device
+ )
+{
+ EFI_STATUS Status;
+ EFI_FILE_PROTOCOL *File;
+
+ Status = FileOpen (Device,
+ mFvInstance->MappedFile,
+ &File,
+ EFI_FILE_MODE_WRITE |
+ EFI_FILE_MODE_READ);
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+
+ Status = FileWrite (File,
+ mFvInstance->Offset,
+ mFvInstance->FvBase,
+ mFvInstance->FvLength);
+ FileClose (File);
+ return Status;
+}
+
+
+STATIC
+VOID
+EFIAPI
+DumpVars(
+ IN EFI_EVENT Event,
+ IN VOID *Context
+ )
+{
+ EFI_STATUS Status;
+
+ if (mFvInstance->Device == NULL) {
+ DEBUG((DEBUG_INFO, "Variable store not found?\n"));
+ return;
+ }
+
+ if (!mFvInstance->Dirty) {
+ DEBUG((DEBUG_INFO, "Variables not dirty, not dumping!\n"));
+ return;
+ }
+
+ Status = DoDump (mFvInstance->Device);
+ if (EFI_ERROR (Status)) {
+ DEBUG((DEBUG_ERROR, "Couldn't dump '%s'\n",
+ mFvInstance->MappedFile));
+ ASSERT_EFI_ERROR(Status);
+ return;
+ }
+
+ DEBUG((DEBUG_INFO, "Variables dumped!\n"));
+ mFvInstance->Dirty = FALSE;
+}
+
+
+VOID
+ReadyToBootHandler (
+ IN EFI_EVENT Event,
+ IN VOID *Context
+ )
+{
+ EFI_STATUS Status;
+ EFI_EVENT ImageInstallEvent;
+ VOID *ImageRegistration;
+
+ Status = gBS->CreateEvent (
+ EVT_NOTIFY_SIGNAL,
+ TPL_CALLBACK,
+ DumpVars,
+ NULL,
+ &ImageInstallEvent
+ );
+ ASSERT_EFI_ERROR (Status);
+
+ Status = gBS->RegisterProtocolNotify (
+ &gEfiLoadedImageProtocolGuid,
+ ImageInstallEvent,
+ &ImageRegistration
+ );
+ ASSERT_EFI_ERROR (Status);
+
+ DumpVars(NULL, NULL);
+ Status = gBS->CloseEvent(Event);
+ ASSERT_EFI_ERROR (Status);
+}
+
+
+VOID
+InstallDumpVarEventHandlers (
+ VOID
+ )
+{
+ EFI_STATUS Status;
+ EFI_EVENT ResetEvent;
+ EFI_EVENT ReadyToBootEvent;
+
+ Status = gBS->CreateEventEx (
+ EVT_NOTIFY_SIGNAL,
+ TPL_CALLBACK,
+ DumpVars,
+ NULL,
+ &gRaspberryPiEventResetGuid,
+ &ResetEvent
+ );
+ ASSERT_EFI_ERROR (Status);
+
+ Status = gBS->CreateEventEx (
+ EVT_NOTIFY_SIGNAL,
+ TPL_CALLBACK,
+ ReadyToBootHandler,
+ NULL,
+ &gEfiEventReadyToBootGuid,
+ &ReadyToBootEvent
+ );
+ ASSERT_EFI_ERROR (Status);
+}
+
+
+VOID
+EFIAPI
+OnSimpleFileSystemInstall (
+ IN EFI_EVENT Event,
+ IN VOID *Context
+ )
+{
+ EFI_STATUS Status;
+ UINTN HandleSize;
+ EFI_HANDLE Handle;
+ EFI_DEVICE_PATH_PROTOCOL *Device;
+
+ if ((mFvInstance->Device != NULL) &&
+ !EFI_ERROR (CheckStoreExists (mFvInstance->Device))
+ ) {
+ //
+ // We've already found the variable store before,
+ // and that device is not removed from the ssystem.
+ //
+ return;
+ }
+
+ while (TRUE) {
+ HandleSize = sizeof (EFI_HANDLE);
+ Status = gBS->LocateHandle (
+ ByRegisterNotify,
+ NULL,
+ mSFSRegistration,
+ &HandleSize,
+ &Handle
+ );
+ if (Status == EFI_NOT_FOUND) {
+ break;
+ }
+
+ ASSERT_EFI_ERROR (Status);
+
+ Status = CheckStore (Handle, &Device);
+ if (EFI_ERROR (Status)) {
+ continue;
+ }
+
+ Status = DoDump (Device);
+ if (EFI_ERROR (Status)) {
+ DEBUG((DEBUG_ERROR, "Couldn't update '%s'\n",
+ mFvInstance->MappedFile));
+ ASSERT_EFI_ERROR(Status);
+ continue;
+ }
+
+ if (mFvInstance->Device != NULL) {
+ gBS->FreePool (mFvInstance->Device);
+ }
+
+ DEBUG((DEBUG_INFO, "Found variable store!\n"));
+ mFvInstance->Device = Device;
+ break;
+ }
+}
+
+
+VOID
+InstallFSNotifyHandler (
+ VOID
+ )
+{
+ EFI_STATUS Status;
+ EFI_EVENT Event;
+
+ Status = gBS->CreateEvent (
+ EVT_NOTIFY_SIGNAL,
+ TPL_CALLBACK,
+ OnSimpleFileSystemInstall,
+ NULL,
+ &Event
+ );
+ ASSERT_EFI_ERROR (Status);
+
+ Status = gBS->RegisterProtocolNotify (
+ &gEfiSimpleFileSystemProtocolGuid,
+ Event,
+ &mSFSRegistration
+ );
+ ASSERT_EFI_ERROR (Status);
+}
diff --git a/Platform/Broadcom/Bcm283x/Drivers/VarBlockServiceDxe/VarBlockServiceDxe.inf b/Platform/Broadcom/Bcm283x/Drivers/VarBlockServiceDxe/VarBlockServiceDxe.inf
new file mode 100644
index 000000000000..95ec0f8a64e9
--- /dev/null
+++ b/Platform/Broadcom/Bcm283x/Drivers/VarBlockServiceDxe/VarBlockServiceDxe.inf
@@ -0,0 +1,93 @@
+#/** @file
+#
+# Support for the FS-backed "flash" device.
+# The trick is to keep it inside the RPI firmware file itself...
+#
+# Copyright (c) 2018, Andrei Warkentin <andrey.warkentin@gmail.com>
+# Copyright (c) 2006-2013, Intel Corporation. All rights reserved.
+#
+# This program and the accompanying materials are licensed and made available
+# under the terms and conditions of the BSD License which accompanies this
+# distribution. The full text of the license may be found at
+# http://opensource.org/licenses/bsd-license.php
+#
+# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR
+# IMPLIED.
+#
+#**/
+
+[Defines]
+ INF_VERSION = 0x00010005
+ BASE_NAME = VarBlockServiceDxe
+ FILE_GUID = 733cbac2-b23f-4b92-bc8e-fb01ce5907b7
+ MODULE_TYPE = DXE_RUNTIME_DRIVER
+ VERSION_STRING = 1.0
+ ENTRY_POINT = FvbInitialize
+
+#
+# The following information is for reference only and not required by the build
+# tools.
+#
+# VALID_ARCHITECTURES = AARCH64
+#
+
+[Sources]
+ FvbInfo.c
+ VarBlockService.c
+ VarBlockServiceDxe.c
+ FileIo.c
+
+[Packages]
+ ArmPkg/ArmPkg.dec
+ MdePkg/MdePkg.dec
+ MdeModulePkg/MdeModulePkg.dec
+ Platform/Broadcom/Bcm283x/RaspberryPiPkg.dec
+
+[LibraryClasses]
+ BaseLib
+ BaseMemoryLib
+ DebugLib
+ DevicePathLib
+ DxeServicesTableLib
+ MemoryAllocationLib
+ PcdLib
+ UefiBootServicesTableLib
+ UefiDriverEntryPoint
+ UefiRuntimeLib
+
+[Guids]
+ gEfiEventVirtualAddressChangeGuid
+ gRaspberryPiEventResetGuid
+ gEfiEventReadyToBootGuid
+
+[Protocols]
+ gEfiSimpleFileSystemProtocolGuid
+ gEfiLoadedImageProtocolGuid
+ gEfiBlockIoProtocolGuid
+ gEfiFirmwareVolumeBlockProtocolGuid # PROTOCOL SOMETIMES_PRODUCED
+ gEfiDevicePathProtocolGuid # PROTOCOL SOMETIMES_PRODUCED
+
+[FixedPcd]
+ gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableSize
+ gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingSize
+ gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareSize
+ gRaspberryPiTokenSpaceGuid.PcdNvStorageVariableBase
+ gRaspberryPiTokenSpaceGuid.PcdNvStorageFtwWorkingBase
+ gRaspberryPiTokenSpaceGuid.PcdNvStorageFtwSpareBase
+ gRaspberryPiTokenSpaceGuid.PcdNvStorageEventLogSize
+ gRaspberryPiTokenSpaceGuid.PcdFirmwareBlockSize
+ gArmTokenSpaceGuid.PcdFdBaseAddress
+ gArmTokenSpaceGuid.PcdFdSize
+
+[Pcd]
+ gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingBase
+ gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareBase
+ gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableBase
+ gRaspberryPiTokenSpaceGuid.PcdNvStorageEventLogBase
+ gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableBase64
+
+[FeaturePcd]
+
+[Depex]
+ TRUE
--
2.17.0.windows.1
next prev parent reply other threads:[~2018-12-10 12:39 UTC|newest]
Thread overview: 48+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-12-10 12:38 [PATCH v2 edk2-platforms 00/20] Platform/Broadcom: Add Raspberry Pi 3 support Pete Batard
2018-12-10 12:38 ` [PATCH v2 edk2-platforms 01/20] Platform/Broadcom/RPi3: Add Reset and Memory Init libraries Pete Batard
2018-12-12 20:43 ` Ard Biesheuvel
2018-12-13 10:48 ` Pete Batard
2018-12-10 12:38 ` [PATCH v2 edk2-platforms 02/20] Platform/Broadcom/RPi3: Add Platform library Pete Batard
2018-12-10 12:38 ` [PATCH v2 edk2-platforms 03/20] Platform/Broadcom/RPi3: Add GPIO and RTC libraries Pete Batard
2018-12-12 20:50 ` Ard Biesheuvel
2018-12-13 10:49 ` Pete Batard
2018-12-13 10:55 ` Leif Lindholm
2018-12-10 12:38 ` [PATCH v2 edk2-platforms 04/20] Platform/Broadcom/RPi3: Add ACPI Tables Pete Batard
2018-12-12 20:52 ` Ard Biesheuvel
2018-12-13 10:49 ` Pete Batard
2018-12-10 12:38 ` [PATCH v2 edk2-platforms 05/20] Platform/Broadcom/RPi3: Add Boot Manager library Pete Batard
2018-12-12 20:56 ` Ard Biesheuvel
2018-12-10 12:38 ` [PATCH v2 edk2-platforms 06/20] Platform/Broadcom/RPi3: Add Interrupt and Device Tree drivers Pete Batard
2018-12-12 21:09 ` Ard Biesheuvel
2018-12-13 10:49 ` Pete Batard
2018-12-10 12:38 ` [PATCH v2 edk2-platforms 07/20] Platform/Broadcom/RPi3: Add Firmware driver Pete Batard
2018-12-12 21:17 ` Ard Biesheuvel
2018-12-13 10:49 ` Pete Batard
2018-12-10 12:38 ` [PATCH v2 edk2-platforms 08/20] Platform/Broadcom/RPi3: Add Display driver Pete Batard
2018-12-14 15:06 ` Ard Biesheuvel
2018-12-10 12:38 ` [PATCH v2 edk2-platforms 09/20] Platform/Broadcom/RPi3: Add Graphic Console driver Pete Batard
2018-12-14 15:31 ` Ard Biesheuvel
2018-12-10 12:38 ` [PATCH v2 edk2-platforms 10/20] Platform/Broadcom/RPi3: Add Base MMC driver Pete Batard
2018-12-10 12:38 ` [PATCH v2 edk2-platforms 11/20] Platform/Broadcom/RPi3: Add Arasan " Pete Batard
2018-12-10 12:38 ` [PATCH v2 edk2-platforms 12/20] Platform/Broadcom/RPi3: Add SD Host driver Pete Batard
2018-12-10 12:38 ` [PATCH v2 edk2-platforms 13/20] Platform/Broadcom/RPi3: Add SMBIOS driver Pete Batard
2018-12-14 15:36 ` Ard Biesheuvel
2018-12-10 12:38 ` Pete Batard [this message]
2018-12-10 12:38 ` [PATCH v2 edk2-platforms 15/20] Platform/Broadcom/RPi3: Add Platform Config driver Pete Batard
2018-12-10 12:38 ` [PATCH v2 edk2-platforms 16/20] Platform/Broadcom/RPi3: Add Raspberry Pi 3 Platform Pete Batard
2018-12-14 15:39 ` Ard Biesheuvel
2018-12-14 16:21 ` Pete Batard
2018-12-10 12:38 ` [PATCH v2 edk2-platforms 17/20] Platform/Broadcom/RPi3 *NON-OSI*: Add ATF binaries Pete Batard
2018-12-10 12:38 ` [PATCH v2 edk2-platforms 18/20] Platform/Broadcom/RPi3 *NON-OSI*: Add Device Tree binaries Pete Batard
2018-12-10 12:38 ` [PATCH v2 edk2-platforms 19/20] Platform/Broadcom/RPi3 *NON-OSI*: Add USB Host driver Pete Batard
2018-12-10 12:38 ` [PATCH v2 edk2-platforms 20/20] Platform/Broadcom/RPi3 *NON-OSI*: Add Logo driver Pete Batard
2018-12-11 18:10 ` [PATCH v2 edk2-platforms 00/20] Platform/Broadcom: Add Raspberry Pi 3 support Leif Lindholm
2018-12-11 20:16 ` Pete Batard
2018-12-11 21:20 ` Ard Biesheuvel
2018-12-12 18:32 ` Leif Lindholm
2018-12-12 19:53 ` Pete Batard
2018-12-12 20:01 ` Leif Lindholm
2018-12-14 16:14 ` Philippe Mathieu-Daudé
2018-12-14 16:36 ` Leif Lindholm
2018-12-14 17:08 ` Pete Batard
2018-12-14 18:41 ` Leif Lindholm
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181210123853.4864-15-pete@akeo.ie \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox