From: Ard Biesheuvel <ard.biesheuvel@linaro.org>
To: edk2-devel@lists.01.org
Subject: [PATCH] Platform/FVP-AArch64: switch to the SBSA watchdog
Date: Tue, 18 Dec 2018 17:46:21 +0100 [thread overview]
Message-ID: <20181218164621.19072-1-ard.biesheuvel@linaro.org> (raw)
On the FVP Foundation model, the SP805 watchdog appears to be 'wired'
incorrectly, resulting in a watchdog counter that decrements at the
APB clock rate of 24 MHz instead of the usual 32 kHz. Since the
timer start value is only 32-bits wide, this makes the watchdog
unusable in UEFI, since the default timeout set by the DXE core is
5 minutes, which is not representable in 32-bit at this clock rate.
So switch to the SBSA watchdog instead, which is wired up to the
generic timer, and ticks at the correct rate.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
---
Platform/ARM/VExpressPkg/ArmVExpress-FVP-AArch64.dsc | 7 ++++---
Platform/ARM/VExpressPkg/ArmVExpress-FVP-AArch64.fdf | 2 +-
Platform/ARM/VExpressPkg/Include/Platform/RTSM/ArmPlatform.h | 3 +++
Platform/ARM/VExpressPkg/Library/ArmVExpressLibRTSM/ArmVExpressLib.inf | 3 +++
Platform/ARM/VExpressPkg/Library/ArmVExpressLibRTSM/RTSMMem.c | 7 ++++++-
5 files changed, 17 insertions(+), 5 deletions(-)
diff --git a/Platform/ARM/VExpressPkg/ArmVExpress-FVP-AArch64.dsc b/Platform/ARM/VExpressPkg/ArmVExpress-FVP-AArch64.dsc
index 7db1c675c3d9..0941edeaf53c 100644
--- a/Platform/ARM/VExpressPkg/ArmVExpress-FVP-AArch64.dsc
+++ b/Platform/ARM/VExpressPkg/ArmVExpress-FVP-AArch64.dsc
@@ -133,9 +133,10 @@
gArmPlatformTokenSpaceGuid.PcdPL031RtcBase|0x1C170000
## SBSA Watchdog Count
-!ifndef DISABLE_SBSA_WATCHDOG
gArmPlatformTokenSpaceGuid.PcdWatchdogCount|1
-!endif
+ gArmTokenSpaceGuid.PcdGenericWatchdogControlBase|0x2a440000
+ gArmTokenSpaceGuid.PcdGenericWatchdogRefreshBase|0x2a450000
+ gArmTokenSpaceGuid.PcdGenericWatchdogEl2IntrNum|59
!ifdef EDK2_ENABLE_PL111
## PL111 Versatile Express Motherboard controller
@@ -265,7 +266,7 @@
!ifdef EDK2_ENABLE_PL111
ArmPlatformPkg/Drivers/LcdGraphicsOutputDxe/LcdGraphicsOutputDxe.inf
!endif
- ArmPlatformPkg/Drivers/SP805WatchdogDxe/SP805WatchdogDxe.inf
+ ArmPkg/Drivers/GenericWatchdogDxe/GenericWatchdogDxe.inf
# SMBIOS Support
diff --git a/Platform/ARM/VExpressPkg/ArmVExpress-FVP-AArch64.fdf b/Platform/ARM/VExpressPkg/ArmVExpress-FVP-AArch64.fdf
index 239029d05cf1..c3e573e1bb4f 100644
--- a/Platform/ARM/VExpressPkg/ArmVExpress-FVP-AArch64.fdf
+++ b/Platform/ARM/VExpressPkg/ArmVExpress-FVP-AArch64.fdf
@@ -116,7 +116,7 @@ FvNameGuid = 87940482-fc81-41c3-87e6-399cf85ac8a0
!ifdef EDK2_ENABLE_PL111
INF ArmPlatformPkg/Drivers/LcdGraphicsOutputDxe/LcdGraphicsOutputDxe.inf
!endif
- INF ArmPlatformPkg/Drivers/SP805WatchdogDxe/SP805WatchdogDxe.inf
+ INF ArmPkg/Drivers/GenericWatchdogDxe/GenericWatchdogDxe.inf
#
# Semi-hosting filesystem
diff --git a/Platform/ARM/VExpressPkg/Include/Platform/RTSM/ArmPlatform.h b/Platform/ARM/VExpressPkg/Include/Platform/RTSM/ArmPlatform.h
index d856b6daa1d7..e267912ef5f5 100644
--- a/Platform/ARM/VExpressPkg/Include/Platform/RTSM/ArmPlatform.h
+++ b/Platform/ARM/VExpressPkg/Include/Platform/RTSM/ArmPlatform.h
@@ -76,4 +76,7 @@
#define PL111_CLCD_MOTHERBOARD_VIDEO_MODE_OSC_ID 1
#define PL111_CLCD_CORE_TILE_VIDEO_MODE_OSC_ID 1
+#define SBSA_WATCHDOG_BASE 0x2a440000
+#define SBSA_WATCHDOG_SIZE (2 * SIZE_64KB)
+
#endif
diff --git a/Platform/ARM/VExpressPkg/Library/ArmVExpressLibRTSM/ArmVExpressLib.inf b/Platform/ARM/VExpressPkg/Library/ArmVExpressLibRTSM/ArmVExpressLib.inf
index 53898c5e957e..511a2ac99b75 100644
--- a/Platform/ARM/VExpressPkg/Library/ArmVExpressLibRTSM/ArmVExpressLib.inf
+++ b/Platform/ARM/VExpressPkg/Library/ArmVExpressLibRTSM/ArmVExpressLib.inf
@@ -60,5 +60,8 @@
gArmPlatformTokenSpaceGuid.PcdArmMaliDpBase
gArmPlatformTokenSpaceGuid.PcdArmMaliDpMemoryRegionLength
+ gArmTokenSpaceGuid.PcdGenericWatchdogControlBase
+ gArmTokenSpaceGuid.PcdGenericWatchdogRefreshBase
+
[Ppis]
gArmMpCoreInfoPpiGuid
diff --git a/Platform/ARM/VExpressPkg/Library/ArmVExpressLibRTSM/RTSMMem.c b/Platform/ARM/VExpressPkg/Library/ArmVExpressLibRTSM/RTSMMem.c
index c8eefa0cf28b..eb8f6a48cd02 100644
--- a/Platform/ARM/VExpressPkg/Library/ArmVExpressLibRTSM/RTSMMem.c
+++ b/Platform/ARM/VExpressPkg/Library/ArmVExpressLibRTSM/RTSMMem.c
@@ -23,7 +23,7 @@
#define DP_BASE_DESCRIPTOR ((FixedPcdGet64 (PcdArmMaliDpBase) != 0) ? 1 : 0)
// Number of Virtual Memory Map Descriptors
-#define MAX_VIRTUAL_MEMORY_MAP_DESCRIPTORS (9 + DP_BASE_DESCRIPTOR)
+#define MAX_VIRTUAL_MEMORY_MAP_DESCRIPTORS (10 + DP_BASE_DESCRIPTOR)
// DDR attributes
#define DDR_ATTRIBUTES_CACHED ARM_MEMORY_REGION_ATTRIBUTE_WRITE_BACK
@@ -175,6 +175,11 @@ ArmPlatformGetVirtualMemoryMap (
VirtualMemoryTable[Index].Attributes = CacheAttributes;
}
+ VirtualMemoryTable[++Index].PhysicalBase = SBSA_WATCHDOG_BASE;
+ VirtualMemoryTable[Index].VirtualBase = SBSA_WATCHDOG_BASE;
+ VirtualMemoryTable[Index].Length = SBSA_WATCHDOG_SIZE;
+ VirtualMemoryTable[Index].Attributes = ARM_MEMORY_REGION_ATTRIBUTE_DEVICE;
+
// End of Table
VirtualMemoryTable[++Index].PhysicalBase = 0;
VirtualMemoryTable[Index].VirtualBase = 0;
--
2.17.1
next reply other threads:[~2018-12-18 16:46 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-12-18 16:46 Ard Biesheuvel [this message]
2018-12-19 16:25 ` [PATCH] Platform/FVP-AArch64: switch to the SBSA watchdog Leif Lindholm
2018-12-20 10:02 ` Thomas Abraham
2018-12-20 11:09 ` Ard Biesheuvel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181218164621.19072-1-ard.biesheuvel@linaro.org \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox