[PATCH v1 20/22] DynamicTablesPkg: Arm DBG2 Table Generator

[Sami Mujawar <sami.mujawar@arm.com>]

The DBG2 generator uses the configuration manager protocol
to obtain the debug serial port information from the platform
configuration manager. It then updates a template DBG2 table
structure. This table data is used by the Table Manager to
install the DBG2 table.

Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
---
 DynamicTablesPkg/DynamicTables.dsc.inc                              |   1 +
 DynamicTablesPkg/Library/Acpi/Arm/AcpiDbg2LibArm/AcpiDbg2LibArm.inf |  48 +++
 DynamicTablesPkg/Library/Acpi/Arm/AcpiDbg2LibArm/Dbg2Generator.c    | 442 ++++++++++++++++++++
 3 files changed, 491 insertions(+)

diff --git a/DynamicTablesPkg/DynamicTables.dsc.inc b/DynamicTablesPkg/DynamicTables.dsc.inc
index cfefd57d451155880e6b0e62f1f0605160e6a9aa..5ff981619fcd3a579afc50faff41e474a5d604ad 100644
--- a/DynamicTablesPkg/DynamicTables.dsc.inc
+++ b/DynamicTablesPkg/DynamicTables.dsc.inc
@@ -27,6 +27,7 @@ [Components.common]
   #
   DynamicTablesPkg/Drivers/DynamicTableFactoryDxe/DynamicTableFactoryDxe.inf {
     <LibraryClasses>
+      NULL|DynamicTablesPkg/Library/Acpi/Arm/AcpiDbg2LibArm/AcpiDbg2LibArm.inf
       NULL|DynamicTablesPkg/Library/Acpi/Arm/AcpiFadtLibArm/AcpiFadtLibArm.inf
       NULL|DynamicTablesPkg/Library/Acpi/Arm/AcpiGtdtLibArm/AcpiGtdtLibArm.inf
       NULL|DynamicTablesPkg/Library/Acpi/Arm/AcpiMadtLibArm/AcpiMadtLibArm.inf
diff --git a/DynamicTablesPkg/Library/Acpi/Arm/AcpiDbg2LibArm/AcpiDbg2LibArm.inf b/DynamicTablesPkg/Library/Acpi/Arm/AcpiDbg2LibArm/AcpiDbg2LibArm.inf
new file mode 100644
index 0000000000000000000000000000000000000000..4075862204c9a12cfd26002e359e054c36914ef0
--- /dev/null
+++ b/DynamicTablesPkg/Library/Acpi/Arm/AcpiDbg2LibArm/AcpiDbg2LibArm.inf
@@ -0,0 +1,48 @@
+## @file
+# DBG2 Table Generator
+#
+#  Copyright (c) 2017 - 2018, ARM Limited. All rights reserved.
+#
+#  This program and the accompanying materials
+#  are licensed and made available under the terms and conditions of the BSD License
+#  which accompanies this distribution.  The full text of the license may be found at
+#  http://opensource.org/licenses/bsd-license.php
+#
+#  THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+#  WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+##
+
+[Defines]
+  INF_VERSION    = 0x00010019
+  BASE_NAME      = AcpiDbg2LibArm
+  FILE_GUID      = A17BA4F0-3DEB-4FE5-BD27-EC008E541B22
+  VERSION_STRING = 1.0
+  MODULE_TYPE    = DXE_DRIVER
+  LIBRARY_CLASS  = NULL|DXE_DRIVER
+  CONSTRUCTOR    = AcpiDbg2LibConstructor
+  DESTRUCTOR     = AcpiDbg2LibDestructor
+
+[Sources]
+  Dbg2Generator.c
+
+[Packages]
+  MdePkg/MdePkg.dec
+  MdeModulePkg/MdeModulePkg.dec
+  EmbeddedPkg/EmbeddedPkg.dec
+  ArmPlatformPkg/ArmPlatformPkg.dec
+  DynamicTablesPkg/DynamicTablesPkg.dec
+
+[LibraryClasses]
+  BaseLib
+  SerialPortLib
+
+[FixedPcd]
+  gEfiMdePkgTokenSpaceGuid.PcdUartDefaultBaudRate
+  gEfiMdePkgTokenSpaceGuid.PcdUartDefaultDataBits
+  gEfiMdePkgTokenSpaceGuid.PcdUartDefaultParity
+  gEfiMdePkgTokenSpaceGuid.PcdUartDefaultStopBits
+
+[Protocols]
+
+[Guids]
+
diff --git a/DynamicTablesPkg/Library/Acpi/Arm/AcpiDbg2LibArm/Dbg2Generator.c b/DynamicTablesPkg/Library/Acpi/Arm/AcpiDbg2LibArm/Dbg2Generator.c
new file mode 100644
index 0000000000000000000000000000000000000000..2c41afd8a50ca6fbea6950fa59af74b528111840
--- /dev/null
+++ b/DynamicTablesPkg/Library/Acpi/Arm/AcpiDbg2LibArm/Dbg2Generator.c
@@ -0,0 +1,442 @@
+/** @file
+  DBG2 Table Generator
+
+  Copyright (c) 2017 - 2018, ARM Limited. All rights reserved.
+  This program and the accompanying materials
+  are licensed and made available under the terms and conditions of the BSD License
+  which accompanies this distribution.  The full text of the license may be found at
+  http://opensource.org/licenses/bsd-license.php
+
+  THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+  WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+  @par Reference(s):
+  - Microsoft Debug Port Table 2 (DBG2) Specification - December 10, 2015.
+
+**/
+
+#include <IndustryStandard/DebugPort2Table.h>
+#include <Library/AcpiLib.h>
+#include <Library/DebugLib.h>
+#include <Library/PL011UartLib.h>
+#include <Protocol/AcpiTable.h>
+#include <Protocol/SerialIo.h>
+
+// Module specific include files.
+#include <AcpiTableGenerator.h>
+#include <ConfigurationManagerObject.h>
+#include <ConfigurationManagerHelper.h>
+#include <Library/TableHelperLib.h>
+#include <Protocol/ConfigurationManagerProtocol.h>
+
+/** ARM standard DBG2 Table Generator
+
+  Constructs the DBG2 table for PL011 or SBSA UART peripherals.
+
+Requirements:
+  The following Configuration Manager Object(s) are required by
+  this Generator:
+  - EArmObjSerialDebugPortInfo
+*/
+
+#pragma pack(1)
+
+/** The number of debug ports represented by the Table.
+*/
+#define DBG2_NUM_DEBUG_PORTS                       1
+
+/** The number of Generic Address Registers
+    presented in the debug device information.
+*/
+#define DBG2_NUMBER_OF_GENERIC_ADDRESS_REGISTERS   1
+
+/** The index for the debug port 1 in the Debug port information list.
+*/
+#define DBG_PORT_INDEX_PORT1                       0
+
+/** A string representing the name of the debug port 1.
+*/
+#define NAME_STR_PORT1                            "COM1"
+
+/** The length of the namespace string.
+*/
+#define DBG2_NAMESPACESTRING_FIELD_SIZE            sizeof (NAME_STR_PORT1)
+
+/** The PL011 UART address range length.
+*/
+#define PL011_UART_LENGTH                          0x1000
+
+/** A structure that provides the OS with the required information
+    for initializing a debugger connection.
+*/
+typedef struct {
+  /// The debug device information for the platform
+  EFI_ACPI_DBG2_DEBUG_DEVICE_INFORMATION_STRUCT Dbg2Device;
+
+  /// The base address register for the serial port
+  EFI_ACPI_6_2_GENERIC_ADDRESS_STRUCTURE        BaseAddressRegister;
+
+  /// The address size
+  UINT32 AddressSize;
+
+  /// The debug port name string
+  UINT8  NameSpaceString[DBG2_NAMESPACESTRING_FIELD_SIZE];
+} DBG2_DEBUG_DEVICE_INFORMATION;
+
+/** A structure representing the information about the debug port(s)
+    available on the platform.
+*/
+typedef struct {
+  /// The DBG2 table header
+  EFI_ACPI_DEBUG_PORT_2_DESCRIPTION_TABLE Description;
+
+  /// Debug port information list
+  DBG2_DEBUG_DEVICE_INFORMATION       Dbg2DeviceInfo[DBG2_NUM_DEBUG_PORTS];
+} DBG2_TABLE;
+
+/** A helper macro used for initializing the debug port device
+    information structure.
+
+  @param [in]  NumReg       The number of generic address registers.
+  @param [in]  SubType      The DBG Port SubType.
+  @param [in]  UartBase     The UART port base address.
+  @param [in]  UartAddrLen  The UART port address range length.
+  @param [in]  UartNameStr  The UART port name string.
+**/
+#define DBG2_DEBUG_PORT_DDI(                                          \
+          NumReg,                                                     \
+          SubType,                                                    \
+          UartBase,                                                   \
+          UartAddrLen,                                                \
+          UartNameStr                                                 \
+          ) {                                                         \
+    {                                                                 \
+      /* UINT8     Revision */                                        \
+      EFI_ACPI_DBG2_DEBUG_DEVICE_INFORMATION_STRUCT_REVISION,         \
+      /* UINT16    Length */                                          \
+      sizeof (DBG2_DEBUG_DEVICE_INFORMATION),                         \
+      /* UINT8     NumberofGenericAddressRegisters */                 \
+      NumReg,                                                         \
+      /* UINT16    NameSpaceStringLength */                           \
+      DBG2_NAMESPACESTRING_FIELD_SIZE,                                \
+      /* UINT16    NameSpaceStringOffset */                           \
+      OFFSET_OF (DBG2_DEBUG_DEVICE_INFORMATION, NameSpaceString),     \
+      /* UINT16    OemDataLength */                                   \
+      0,                                                              \
+      /* UINT16    OemDataOffset */                                   \
+      0,                                                              \
+      /* UINT16    Port Type */                                       \
+      EFI_ACPI_DBG2_PORT_TYPE_SERIAL,                                 \
+      /* UINT16    Port Subtype */                                    \
+      SubType,                                                        \
+      /* UINT8     Reserved[2] */                                     \
+      {EFI_ACPI_RESERVED_BYTE, EFI_ACPI_RESERVED_BYTE},               \
+      /* UINT16    BaseAddressRegister Offset */                      \
+      OFFSET_OF (DBG2_DEBUG_DEVICE_INFORMATION, BaseAddressRegister), \
+      /* UINT16    AddressSize Offset */                              \
+      OFFSET_OF (DBG2_DEBUG_DEVICE_INFORMATION, AddressSize)          \
+    },                                                                \
+    /* EFI_ACPI_6_2_GENERIC_ADDRESS_STRUCTURE BaseAddressRegister */  \
+    ARM_GAS32 (UartBase),                                             \
+    /* UINT32  AddressSize */                                         \
+    UartAddrLen,                                                      \
+    /* UINT8   NameSpaceString[MAX_DBG2_NAME_LEN] */                  \
+    UartNameStr                                                       \
+  }
+
+/** The DBG2 Table template definition.
+
+  Note: fields marked with "{Template}" will be set dynamically
+*/
+STATIC
+DBG2_TABLE AcpiDbg2 = {
+  {
+    ACPI_HEADER (
+      EFI_ACPI_6_2_DEBUG_PORT_2_TABLE_SIGNATURE,
+      DBG2_TABLE,
+      EFI_ACPI_DBG2_DEBUG_DEVICE_INFORMATION_STRUCT_REVISION
+      ),
+    OFFSET_OF (DBG2_TABLE, Dbg2DeviceInfo),
+    DBG2_NUM_DEBUG_PORTS
+  },
+  {
+    /*
+     * Debug port 1
+     */
+    DBG2_DEBUG_PORT_DDI (
+      DBG2_NUMBER_OF_GENERIC_ADDRESS_REGISTERS,
+      0,                    // {Template}: Serial Port Subtype
+      0,                    // {Template}: Serial Port Base Address
+      PL011_UART_LENGTH,
+      NAME_STR_PORT1
+      )
+  }
+};
+
+#pragma pack()
+
+/** This macro expands to a function that retrieves the Serial
+    debug port information from the Configuration Manager
+*/
+GET_OBJECT_LIST (
+  EObjNameSpaceArm,
+  EArmObjSerialDebugPortInfo,
+  CM_ARM_SERIAL_PORT_INFO
+  );
+
+/** Initialize the PL011 UART with the parameters obtained from
+    the Configuration Manager.
+
+  @param [in]  SerialPortInfo Pointer to the Serial Port Information.
+
+  @retval EFI_SUCCESS           Success.
+  @retval EFI_INVALID_PARAMETER The parameters for serial port initialization
+                                are invalid.
+**/
+STATIC
+EFI_STATUS
+SetupDebugUart (
+  IN  CONST CM_ARM_SERIAL_PORT_INFO  * CONST SerialPortInfo
+  )
+{
+  EFI_STATUS          Status;
+  UINT64              BaudRate;
+  UINT32              ReceiveFifoDepth;
+  EFI_PARITY_TYPE     Parity;
+  UINT8               DataBits;
+  EFI_STOP_BITS_TYPE  StopBits;
+
+  ASSERT (SerialPortInfo != NULL);
+
+  // Initialize the Serial Debug UART
+  DEBUG ((DEBUG_INFO, "Initializing Serial Debug UART...\n"));
+  ReceiveFifoDepth = 0; // Use the default value for FIFO depth
+  Parity = (EFI_PARITY_TYPE)FixedPcdGet8 (PcdUartDefaultParity);
+  DataBits = FixedPcdGet8 (PcdUartDefaultDataBits);
+  StopBits = (EFI_STOP_BITS_TYPE)FixedPcdGet8 (PcdUartDefaultStopBits);
+
+  BaudRate = SerialPortInfo->BaudRate;
+  Status = PL011UartInitializePort (
+             (UINTN)SerialPortInfo->BaseAddress,
+             SerialPortInfo->Clock,
+             &BaudRate,
+             &ReceiveFifoDepth,
+             &Parity,
+             &DataBits,
+             &StopBits
+             );
+
+  DEBUG ((DEBUG_INFO, "Debug UART Configuration:\n"));
+  DEBUG ((DEBUG_INFO, "UART Base  = 0x%lx\n", SerialPortInfo->BaseAddress));
+  DEBUG ((DEBUG_INFO, "Clock      = %d\n", SerialPortInfo->Clock));
+  DEBUG ((DEBUG_INFO, "Baudrate   = %ld\n", BaudRate));
+  DEBUG ((DEBUG_INFO, "Configuring Debug UART. Status = %r\n", Status));
+
+  ASSERT_EFI_ERROR (Status);
+  return Status;
+}
+
+/** Construct the DBG2 ACPI table
+
+    The BuildDbg2Table function is called by the Dynamic Table Manager
+    to construct the DBG2 ACPI table.
+
+  This function invokes the Configuration Manager protocol interface
+  to get the required hardware information for generating the ACPI
+  table.
+
+  If this function allocates any resources then they must be freed
+  in the FreeXXXXTableResources function.
+
+  @param [in]  This           Pointer to the table generator.
+  @param [in]  AcpiTableInfo  Pointer to the ACPI Table Info.
+  @param [in]  CfgMgrProtocol Pointer to the Configuration Manager
+                              Protocol Interface.
+  @param [out] Table          Pointer to the constructed ACPI Table.
+
+  @retval EFI_SUCCESS           Table generated successfully.
+  @retval EFI_INVALID_PARAMETER A parameter is invalid.
+  @retval EFI_NOT_FOUND         The required object was not found.
+  @retval EFI_BAD_BUFFER_SIZE   The size returned by the Configuration
+                                Manager is less than the Object size for the
+                                requested object.
+**/
+STATIC
+EFI_STATUS
+EFIAPI
+BuildDbg2Table (
+  IN  CONST ACPI_TABLE_GENERATOR                  * CONST This,
+  IN  CONST CM_STD_OBJ_ACPI_TABLE_INFO            * CONST AcpiTableInfo,
+  IN  CONST EDKII_CONFIGURATION_MANAGER_PROTOCOL  * CONST CfgMgrProtocol,
+  OUT       EFI_ACPI_DESCRIPTION_HEADER          ** CONST Table
+  )
+{
+  EFI_STATUS                 Status;
+  CM_ARM_SERIAL_PORT_INFO  * SerialPortInfo;
+
+  ASSERT (This != NULL);
+  ASSERT (AcpiTableInfo != NULL);
+  ASSERT (CfgMgrProtocol != NULL);
+  ASSERT (Table != NULL);
+  ASSERT (AcpiTableInfo->TableGeneratorId == This->GeneratorID);
+  ASSERT (AcpiTableInfo->AcpiTableSignature == This->AcpiTableSignature);
+
+  *Table = NULL;
+
+  Status = GetEArmObjSerialDebugPortInfo (
+             CfgMgrProtocol,
+             CM_NULL_TOKEN,
+             &SerialPortInfo,
+             NULL
+             );
+  if (EFI_ERROR (Status)) {
+    DEBUG ((
+      DEBUG_ERROR,
+      "ERROR: DBG2: Failed to get serial port information. Status = %r\n",
+      Status
+      ));
+    goto error_handler;
+  }
+
+  if (SerialPortInfo->BaseAddress == 0) {
+    Status = EFI_INVALID_PARAMETER;
+    DEBUG ((
+      DEBUG_ERROR,
+      "ERROR: DBG2: Uart port base address is invalid. BaseAddress = 0x%lx\n",
+      SerialPortInfo->BaseAddress
+      ));
+    goto error_handler;
+  }
+
+  if ((SerialPortInfo->PortSubtype !=
+      EFI_ACPI_DBG2_PORT_SUBTYPE_SERIAL_ARM_PL011_UART) &&
+      (SerialPortInfo->PortSubtype !=
+      EFI_ACPI_DBG2_PORT_SUBTYPE_SERIAL_ARM_SBSA_GENERIC_UART_2X) &&
+      (SerialPortInfo->PortSubtype !=
+      EFI_ACPI_DBG2_PORT_SUBTYPE_SERIAL_ARM_SBSA_GENERIC_UART) &&
+      (SerialPortInfo->PortSubtype !=
+      EFI_ACPI_DBG2_PORT_SUBTYPE_SERIAL_DCC)) {
+    Status = EFI_INVALID_PARAMETER;
+    DEBUG ((
+      DEBUG_ERROR,
+      "ERROR: DBG2: Uart port sybtype is invalid. PortSubtype = 0x%x\n",
+      SerialPortInfo->PortSubtype
+      ));
+    goto error_handler;
+  }
+
+  Status = AddAcpiHeader (
+             CfgMgrProtocol,
+             This,
+             (EFI_ACPI_DESCRIPTION_HEADER*)&AcpiDbg2,
+             sizeof (DBG2_TABLE)
+             );
+  if (EFI_ERROR (Status)) {
+    DEBUG ((
+      DEBUG_ERROR,
+      "ERROR: DBG2: Failed to add ACPI header. Status = %r\n",
+      Status
+      ));
+    goto error_handler;
+  }
+
+  // Update the base address
+  AcpiDbg2.Dbg2DeviceInfo[DBG_PORT_INDEX_PORT1].BaseAddressRegister.Address =
+    SerialPortInfo->BaseAddress;
+
+  // Update the serial port subtype
+  AcpiDbg2.Dbg2DeviceInfo[DBG_PORT_INDEX_PORT1].Dbg2Device.PortSubtype =
+    SerialPortInfo->PortSubtype;
+
+  // Initialize the serial port
+  Status = SetupDebugUart (SerialPortInfo);
+  if (EFI_ERROR (Status)) {
+    DEBUG ((
+      DEBUG_ERROR,
+      "ERROR: DBG2: Failed to configure debug serial port. Status = %r\n",
+      Status
+      ));
+    goto error_handler;
+  }
+
+  *Table = (EFI_ACPI_DESCRIPTION_HEADER*)&AcpiDbg2;
+
+error_handler:
+  return Status;
+}
+
+/** This macro defines the DBG2 Table Generator revision.
+*/
+#define DBG2_GENERATOR_REVISION CREATE_REVISION (1, 0)
+
+/** The interface for the DBG2 Table Generator.
+*/
+STATIC
+CONST
+ACPI_TABLE_GENERATOR Dbg2Generator = {
+  // Generator ID
+  CREATE_STD_ACPI_TABLE_GEN_ID (ESTD_ACPI_TABLE_ID_DBG2),
+  // Generator Description
+  L"ACPI.STD.DBG2.GENERATOR",
+  // ACPI Table Signature
+  EFI_ACPI_6_2_DEBUG_PORT_2_TABLE_SIGNATURE,
+  // ACPI Table Revision
+  EFI_ACPI_DBG2_DEBUG_DEVICE_INFORMATION_STRUCT_REVISION,
+  // Creator ID
+  TABLE_GENERATOR_CREATOR_ID_ARM,
+  // Creator Revision
+  DBG2_GENERATOR_REVISION,
+  // Build Table function
+  BuildDbg2Table,
+  // No additional resources are allocated by the generator.
+  // Hence the Free Resource function is not required.
+  NULL
+};
+
+/** Register the Generator with the ACPI Table Factory.
+
+  @param [in]  ImageHandle  The handle to the image.
+  @param [in]  SystemTable  Pointer to the System Table.
+
+  @retval EFI_SUCCESS           The Generator is registered.
+  @retval EFI_INVALID_PARAMETER A parameter is invalid.
+  @retval EFI_ALREADY_STARTED   The Generator for the Table ID
+                                is already registered.
+**/
+EFI_STATUS
+EFIAPI
+AcpiDbg2LibConstructor (
+  IN CONST EFI_HANDLE                ImageHandle,
+  IN       EFI_SYSTEM_TABLE  * CONST SystemTable
+  )
+{
+  EFI_STATUS  Status;
+  Status = RegisterAcpiTableGenerator (&Dbg2Generator);
+  DEBUG ((DEBUG_INFO, "DBG2: Register Generator. Status = %r\n", Status));
+  ASSERT_EFI_ERROR (Status);
+
+  return Status;
+}
+
+/** Deregister the Generator from the ACPI Table Factory.
+
+  @param [in]  ImageHandle  The handle to the image.
+  @param [in]  SystemTable  Pointer to the System Table.
+
+  @retval EFI_SUCCESS           The Generator is deregistered.
+  @retval EFI_INVALID_PARAMETER A parameter is invalid.
+  @retval EFI_NOT_FOUND         The Generator is not registered.
+**/
+EFI_STATUS
+EFIAPI
+AcpiDbg2LibDestructor (
+  IN CONST EFI_HANDLE                ImageHandle,
+  IN       EFI_SYSTEM_TABLE  * CONST SystemTable
+  )
+{
+  EFI_STATUS  Status;
+  Status = DeregisterAcpiTableGenerator (&Dbg2Generator);
+  DEBUG ((DEBUG_INFO, "DBG2: Deregister Generator. Status = %r\n", Status));
+  ASSERT_EFI_ERROR (Status);
+  return Status;
+}
-- 
'Guid(CE165669-3EF3-493F-B85D-6190EE5B9759)'