From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received-SPF: Pass (sender SPF authorized) identity=mailfrom; client-ip=217.140.106.50; helo=cam-smtp0.cambridge.arm.com; envelope-from=sami.mujawar@arm.com; receiver=edk2-devel@lists.01.org Received: from cam-smtp0.cambridge.arm.com (unknown [217.140.106.50]) (using TLSv1 with cipher AES256-SHA (256/256 bits)) (No client certificate requested) by ml01.01.org (Postfix) with ESMTPS id B837C21194888 for ; Fri, 21 Dec 2018 09:00:46 -0800 (PST) Received: from E107187.Arm.com (e107187.arm.com [10.1.195.55]) by cam-smtp0.cambridge.arm.com (8.13.8/8.13.8) with ESMTP id wBLGvOUm018491; Fri, 21 Dec 2018 17:00:44 GMT From: Sami Mujawar To: edk2-devel@lists.01.org Cc: alexei.fedorov@arm.com, leif.lindholm@linaro.org, Matteo.Carlini@arm.com, Stephanie.Hughes-Fitt@arm.com, nd@arm.com Date: Fri, 21 Dec 2018 16:57:17 +0000 Message-Id: <20181221165719.49480-21-sami.mujawar@arm.com> X-Mailer: git-send-email 2.11.0.windows.3 In-Reply-To: <20181221165719.49480-1-sami.mujawar@arm.com> References: <20181221165719.49480-1-sami.mujawar@arm.com> Subject: [PATCH v1 20/22] DynamicTablesPkg: Arm DBG2 Table Generator X-BeenThere: edk2-devel@lists.01.org X-Mailman-Version: 2.1.29 Precedence: list List-Id: EDK II Development List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 21 Dec 2018 17:00:47 -0000 X-List-Received-Date: Fri, 21 Dec 2018 17:00:47 -0000 X-List-Received-Date: Fri, 21 Dec 2018 17:00:47 -0000 X-List-Received-Date: Fri, 21 Dec 2018 17:00:47 -0000 X-List-Received-Date: Fri, 21 Dec 2018 17:00:47 -0000 X-List-Received-Date: Fri, 21 Dec 2018 17:00:47 -0000 X-List-Received-Date: Fri, 21 Dec 2018 17:00:47 -0000 X-List-Received-Date: Fri, 21 Dec 2018 17:00:47 -0000 X-List-Received-Date: Fri, 21 Dec 2018 17:00:47 -0000 X-List-Received-Date: Fri, 21 Dec 2018 17:00:47 -0000 X-List-Received-Date: Fri, 21 Dec 2018 17:00:47 -0000 X-List-Received-Date: Fri, 21 Dec 2018 17:00:47 -0000 X-List-Received-Date: Fri, 21 Dec 2018 17:00:47 -0000 X-List-Received-Date: Fri, 21 Dec 2018 17:00:47 -0000 X-List-Received-Date: Fri, 21 Dec 2018 17:00:47 -0000 X-List-Received-Date: Fri, 21 Dec 2018 17:00:47 -0000 X-List-Received-Date: Fri, 21 Dec 2018 17:00:47 -0000 X-List-Received-Date: Fri, 21 Dec 2018 17:00:47 -0000 X-List-Received-Date: Fri, 21 Dec 2018 17:00:47 -0000 X-List-Received-Date: Fri, 21 Dec 2018 17:00:47 -0000 X-List-Received-Date: Fri, 21 Dec 2018 17:00:47 -0000 X-List-Received-Date: Fri, 21 Dec 2018 17:00:47 -0000 X-List-Received-Date: Fri, 21 Dec 2018 17:00:47 -0000 X-List-Received-Date: Fri, 21 Dec 2018 17:00:47 -0000 X-List-Received-Date: Fri, 21 Dec 2018 17:00:47 -0000 X-List-Received-Date: Fri, 21 Dec 2018 17:00:47 -0000 X-List-Received-Date: Fri, 21 Dec 2018 17:00:47 -0000 X-List-Received-Date: Fri, 21 Dec 2018 17:00:47 -0000 X-List-Received-Date: Fri, 21 Dec 2018 17:00:47 -0000 X-List-Received-Date: Fri, 21 Dec 2018 17:00:47 -0000 X-List-Received-Date: Fri, 21 Dec 2018 17:00:47 -0000 X-List-Received-Date: Fri, 21 Dec 2018 17:00:47 -0000 X-List-Received-Date: Fri, 21 Dec 2018 17:00:47 -0000 X-List-Received-Date: Fri, 21 Dec 2018 17:00:47 -0000 X-List-Received-Date: Fri, 21 Dec 2018 17:00:47 -0000 X-List-Received-Date: Fri, 21 Dec 2018 17:00:47 -0000 X-List-Received-Date: Fri, 21 Dec 2018 17:00:47 -0000 X-List-Received-Date: Fri, 21 Dec 2018 17:00:47 -0000 X-List-Received-Date: Fri, 21 Dec 2018 17:00:47 -0000 X-List-Received-Date: Fri, 21 Dec 2018 17:00:47 -0000 X-List-Received-Date: Fri, 21 Dec 2018 17:00:47 -0000 X-List-Received-Date: Fri, 21 Dec 2018 17:00:47 -0000 X-List-Received-Date: Fri, 21 Dec 2018 17:00:47 -0000 X-List-Received-Date: Fri, 21 Dec 2018 17:00:47 -0000 X-List-Received-Date: Fri, 21 Dec 2018 17:00:47 -0000 X-List-Received-Date: Fri, 21 Dec 2018 17:00:47 -0000 The DBG2 generator uses the configuration manager protocol to obtain the debug serial port information from the platform configuration manager. It then updates a template DBG2 table structure. This table data is used by the Table Manager to install the DBG2 table. Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Sami Mujawar --- DynamicTablesPkg/DynamicTables.dsc.inc | 1 + DynamicTablesPkg/Library/Acpi/Arm/AcpiDbg2LibArm/AcpiDbg2LibArm.inf | 48 +++ DynamicTablesPkg/Library/Acpi/Arm/AcpiDbg2LibArm/Dbg2Generator.c | 442 ++++++++++++++++++++ 3 files changed, 491 insertions(+) diff --git a/DynamicTablesPkg/DynamicTables.dsc.inc b/DynamicTablesPkg/DynamicTables.dsc.inc index cfefd57d451155880e6b0e62f1f0605160e6a9aa..5ff981619fcd3a579afc50faff41e474a5d604ad 100644 --- a/DynamicTablesPkg/DynamicTables.dsc.inc +++ b/DynamicTablesPkg/DynamicTables.dsc.inc @@ -27,6 +27,7 @@ [Components.common] # DynamicTablesPkg/Drivers/DynamicTableFactoryDxe/DynamicTableFactoryDxe.inf { + NULL|DynamicTablesPkg/Library/Acpi/Arm/AcpiDbg2LibArm/AcpiDbg2LibArm.inf NULL|DynamicTablesPkg/Library/Acpi/Arm/AcpiFadtLibArm/AcpiFadtLibArm.inf NULL|DynamicTablesPkg/Library/Acpi/Arm/AcpiGtdtLibArm/AcpiGtdtLibArm.inf NULL|DynamicTablesPkg/Library/Acpi/Arm/AcpiMadtLibArm/AcpiMadtLibArm.inf diff --git a/DynamicTablesPkg/Library/Acpi/Arm/AcpiDbg2LibArm/AcpiDbg2LibArm.inf b/DynamicTablesPkg/Library/Acpi/Arm/AcpiDbg2LibArm/AcpiDbg2LibArm.inf new file mode 100644 index 0000000000000000000000000000000000000000..4075862204c9a12cfd26002e359e054c36914ef0 --- /dev/null +++ b/DynamicTablesPkg/Library/Acpi/Arm/AcpiDbg2LibArm/AcpiDbg2LibArm.inf @@ -0,0 +1,48 @@ +## @file +# DBG2 Table Generator +# +# Copyright (c) 2017 - 2018, ARM Limited. All rights reserved. +# +# This program and the accompanying materials +# are licensed and made available under the terms and conditions of the BSD License +# which accompanies this distribution. The full text of the license may be found at +# http://opensource.org/licenses/bsd-license.php +# +# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, +# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. +## + +[Defines] + INF_VERSION = 0x00010019 + BASE_NAME = AcpiDbg2LibArm + FILE_GUID = A17BA4F0-3DEB-4FE5-BD27-EC008E541B22 + VERSION_STRING = 1.0 + MODULE_TYPE = DXE_DRIVER + LIBRARY_CLASS = NULL|DXE_DRIVER + CONSTRUCTOR = AcpiDbg2LibConstructor + DESTRUCTOR = AcpiDbg2LibDestructor + +[Sources] + Dbg2Generator.c + +[Packages] + MdePkg/MdePkg.dec + MdeModulePkg/MdeModulePkg.dec + EmbeddedPkg/EmbeddedPkg.dec + ArmPlatformPkg/ArmPlatformPkg.dec + DynamicTablesPkg/DynamicTablesPkg.dec + +[LibraryClasses] + BaseLib + SerialPortLib + +[FixedPcd] + gEfiMdePkgTokenSpaceGuid.PcdUartDefaultBaudRate + gEfiMdePkgTokenSpaceGuid.PcdUartDefaultDataBits + gEfiMdePkgTokenSpaceGuid.PcdUartDefaultParity + gEfiMdePkgTokenSpaceGuid.PcdUartDefaultStopBits + +[Protocols] + +[Guids] + diff --git a/DynamicTablesPkg/Library/Acpi/Arm/AcpiDbg2LibArm/Dbg2Generator.c b/DynamicTablesPkg/Library/Acpi/Arm/AcpiDbg2LibArm/Dbg2Generator.c new file mode 100644 index 0000000000000000000000000000000000000000..2c41afd8a50ca6fbea6950fa59af74b528111840 --- /dev/null +++ b/DynamicTablesPkg/Library/Acpi/Arm/AcpiDbg2LibArm/Dbg2Generator.c @@ -0,0 +1,442 @@ +/** @file + DBG2 Table Generator + + Copyright (c) 2017 - 2018, ARM Limited. All rights reserved. + This program and the accompanying materials + are licensed and made available under the terms and conditions of the BSD License + which accompanies this distribution. The full text of the license may be found at + http://opensource.org/licenses/bsd-license.php + + THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, + WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. + + @par Reference(s): + - Microsoft Debug Port Table 2 (DBG2) Specification - December 10, 2015. + +**/ + +#include +#include +#include +#include +#include +#include + +// Module specific include files. +#include +#include +#include +#include +#include + +/** ARM standard DBG2 Table Generator + + Constructs the DBG2 table for PL011 or SBSA UART peripherals. + +Requirements: + The following Configuration Manager Object(s) are required by + this Generator: + - EArmObjSerialDebugPortInfo +*/ + +#pragma pack(1) + +/** The number of debug ports represented by the Table. +*/ +#define DBG2_NUM_DEBUG_PORTS 1 + +/** The number of Generic Address Registers + presented in the debug device information. +*/ +#define DBG2_NUMBER_OF_GENERIC_ADDRESS_REGISTERS 1 + +/** The index for the debug port 1 in the Debug port information list. +*/ +#define DBG_PORT_INDEX_PORT1 0 + +/** A string representing the name of the debug port 1. +*/ +#define NAME_STR_PORT1 "COM1" + +/** The length of the namespace string. +*/ +#define DBG2_NAMESPACESTRING_FIELD_SIZE sizeof (NAME_STR_PORT1) + +/** The PL011 UART address range length. +*/ +#define PL011_UART_LENGTH 0x1000 + +/** A structure that provides the OS with the required information + for initializing a debugger connection. +*/ +typedef struct { + /// The debug device information for the platform + EFI_ACPI_DBG2_DEBUG_DEVICE_INFORMATION_STRUCT Dbg2Device; + + /// The base address register for the serial port + EFI_ACPI_6_2_GENERIC_ADDRESS_STRUCTURE BaseAddressRegister; + + /// The address size + UINT32 AddressSize; + + /// The debug port name string + UINT8 NameSpaceString[DBG2_NAMESPACESTRING_FIELD_SIZE]; +} DBG2_DEBUG_DEVICE_INFORMATION; + +/** A structure representing the information about the debug port(s) + available on the platform. +*/ +typedef struct { + /// The DBG2 table header + EFI_ACPI_DEBUG_PORT_2_DESCRIPTION_TABLE Description; + + /// Debug port information list + DBG2_DEBUG_DEVICE_INFORMATION Dbg2DeviceInfo[DBG2_NUM_DEBUG_PORTS]; +} DBG2_TABLE; + +/** A helper macro used for initializing the debug port device + information structure. + + @param [in] NumReg The number of generic address registers. + @param [in] SubType The DBG Port SubType. + @param [in] UartBase The UART port base address. + @param [in] UartAddrLen The UART port address range length. + @param [in] UartNameStr The UART port name string. +**/ +#define DBG2_DEBUG_PORT_DDI( \ + NumReg, \ + SubType, \ + UartBase, \ + UartAddrLen, \ + UartNameStr \ + ) { \ + { \ + /* UINT8 Revision */ \ + EFI_ACPI_DBG2_DEBUG_DEVICE_INFORMATION_STRUCT_REVISION, \ + /* UINT16 Length */ \ + sizeof (DBG2_DEBUG_DEVICE_INFORMATION), \ + /* UINT8 NumberofGenericAddressRegisters */ \ + NumReg, \ + /* UINT16 NameSpaceStringLength */ \ + DBG2_NAMESPACESTRING_FIELD_SIZE, \ + /* UINT16 NameSpaceStringOffset */ \ + OFFSET_OF (DBG2_DEBUG_DEVICE_INFORMATION, NameSpaceString), \ + /* UINT16 OemDataLength */ \ + 0, \ + /* UINT16 OemDataOffset */ \ + 0, \ + /* UINT16 Port Type */ \ + EFI_ACPI_DBG2_PORT_TYPE_SERIAL, \ + /* UINT16 Port Subtype */ \ + SubType, \ + /* UINT8 Reserved[2] */ \ + {EFI_ACPI_RESERVED_BYTE, EFI_ACPI_RESERVED_BYTE}, \ + /* UINT16 BaseAddressRegister Offset */ \ + OFFSET_OF (DBG2_DEBUG_DEVICE_INFORMATION, BaseAddressRegister), \ + /* UINT16 AddressSize Offset */ \ + OFFSET_OF (DBG2_DEBUG_DEVICE_INFORMATION, AddressSize) \ + }, \ + /* EFI_ACPI_6_2_GENERIC_ADDRESS_STRUCTURE BaseAddressRegister */ \ + ARM_GAS32 (UartBase), \ + /* UINT32 AddressSize */ \ + UartAddrLen, \ + /* UINT8 NameSpaceString[MAX_DBG2_NAME_LEN] */ \ + UartNameStr \ + } + +/** The DBG2 Table template definition. + + Note: fields marked with "{Template}" will be set dynamically +*/ +STATIC +DBG2_TABLE AcpiDbg2 = { + { + ACPI_HEADER ( + EFI_ACPI_6_2_DEBUG_PORT_2_TABLE_SIGNATURE, + DBG2_TABLE, + EFI_ACPI_DBG2_DEBUG_DEVICE_INFORMATION_STRUCT_REVISION + ), + OFFSET_OF (DBG2_TABLE, Dbg2DeviceInfo), + DBG2_NUM_DEBUG_PORTS + }, + { + /* + * Debug port 1 + */ + DBG2_DEBUG_PORT_DDI ( + DBG2_NUMBER_OF_GENERIC_ADDRESS_REGISTERS, + 0, // {Template}: Serial Port Subtype + 0, // {Template}: Serial Port Base Address + PL011_UART_LENGTH, + NAME_STR_PORT1 + ) + } +}; + +#pragma pack() + +/** This macro expands to a function that retrieves the Serial + debug port information from the Configuration Manager +*/ +GET_OBJECT_LIST ( + EObjNameSpaceArm, + EArmObjSerialDebugPortInfo, + CM_ARM_SERIAL_PORT_INFO + ); + +/** Initialize the PL011 UART with the parameters obtained from + the Configuration Manager. + + @param [in] SerialPortInfo Pointer to the Serial Port Information. + + @retval EFI_SUCCESS Success. + @retval EFI_INVALID_PARAMETER The parameters for serial port initialization + are invalid. +**/ +STATIC +EFI_STATUS +SetupDebugUart ( + IN CONST CM_ARM_SERIAL_PORT_INFO * CONST SerialPortInfo + ) +{ + EFI_STATUS Status; + UINT64 BaudRate; + UINT32 ReceiveFifoDepth; + EFI_PARITY_TYPE Parity; + UINT8 DataBits; + EFI_STOP_BITS_TYPE StopBits; + + ASSERT (SerialPortInfo != NULL); + + // Initialize the Serial Debug UART + DEBUG ((DEBUG_INFO, "Initializing Serial Debug UART...\n")); + ReceiveFifoDepth = 0; // Use the default value for FIFO depth + Parity = (EFI_PARITY_TYPE)FixedPcdGet8 (PcdUartDefaultParity); + DataBits = FixedPcdGet8 (PcdUartDefaultDataBits); + StopBits = (EFI_STOP_BITS_TYPE)FixedPcdGet8 (PcdUartDefaultStopBits); + + BaudRate = SerialPortInfo->BaudRate; + Status = PL011UartInitializePort ( + (UINTN)SerialPortInfo->BaseAddress, + SerialPortInfo->Clock, + &BaudRate, + &ReceiveFifoDepth, + &Parity, + &DataBits, + &StopBits + ); + + DEBUG ((DEBUG_INFO, "Debug UART Configuration:\n")); + DEBUG ((DEBUG_INFO, "UART Base = 0x%lx\n", SerialPortInfo->BaseAddress)); + DEBUG ((DEBUG_INFO, "Clock = %d\n", SerialPortInfo->Clock)); + DEBUG ((DEBUG_INFO, "Baudrate = %ld\n", BaudRate)); + DEBUG ((DEBUG_INFO, "Configuring Debug UART. Status = %r\n", Status)); + + ASSERT_EFI_ERROR (Status); + return Status; +} + +/** Construct the DBG2 ACPI table + + The BuildDbg2Table function is called by the Dynamic Table Manager + to construct the DBG2 ACPI table. + + This function invokes the Configuration Manager protocol interface + to get the required hardware information for generating the ACPI + table. + + If this function allocates any resources then they must be freed + in the FreeXXXXTableResources function. + + @param [in] This Pointer to the table generator. + @param [in] AcpiTableInfo Pointer to the ACPI Table Info. + @param [in] CfgMgrProtocol Pointer to the Configuration Manager + Protocol Interface. + @param [out] Table Pointer to the constructed ACPI Table. + + @retval EFI_SUCCESS Table generated successfully. + @retval EFI_INVALID_PARAMETER A parameter is invalid. + @retval EFI_NOT_FOUND The required object was not found. + @retval EFI_BAD_BUFFER_SIZE The size returned by the Configuration + Manager is less than the Object size for the + requested object. +**/ +STATIC +EFI_STATUS +EFIAPI +BuildDbg2Table ( + IN CONST ACPI_TABLE_GENERATOR * CONST This, + IN CONST CM_STD_OBJ_ACPI_TABLE_INFO * CONST AcpiTableInfo, + IN CONST EDKII_CONFIGURATION_MANAGER_PROTOCOL * CONST CfgMgrProtocol, + OUT EFI_ACPI_DESCRIPTION_HEADER ** CONST Table + ) +{ + EFI_STATUS Status; + CM_ARM_SERIAL_PORT_INFO * SerialPortInfo; + + ASSERT (This != NULL); + ASSERT (AcpiTableInfo != NULL); + ASSERT (CfgMgrProtocol != NULL); + ASSERT (Table != NULL); + ASSERT (AcpiTableInfo->TableGeneratorId == This->GeneratorID); + ASSERT (AcpiTableInfo->AcpiTableSignature == This->AcpiTableSignature); + + *Table = NULL; + + Status = GetEArmObjSerialDebugPortInfo ( + CfgMgrProtocol, + CM_NULL_TOKEN, + &SerialPortInfo, + NULL + ); + if (EFI_ERROR (Status)) { + DEBUG (( + DEBUG_ERROR, + "ERROR: DBG2: Failed to get serial port information. Status = %r\n", + Status + )); + goto error_handler; + } + + if (SerialPortInfo->BaseAddress == 0) { + Status = EFI_INVALID_PARAMETER; + DEBUG (( + DEBUG_ERROR, + "ERROR: DBG2: Uart port base address is invalid. BaseAddress = 0x%lx\n", + SerialPortInfo->BaseAddress + )); + goto error_handler; + } + + if ((SerialPortInfo->PortSubtype != + EFI_ACPI_DBG2_PORT_SUBTYPE_SERIAL_ARM_PL011_UART) && + (SerialPortInfo->PortSubtype != + EFI_ACPI_DBG2_PORT_SUBTYPE_SERIAL_ARM_SBSA_GENERIC_UART_2X) && + (SerialPortInfo->PortSubtype != + EFI_ACPI_DBG2_PORT_SUBTYPE_SERIAL_ARM_SBSA_GENERIC_UART) && + (SerialPortInfo->PortSubtype != + EFI_ACPI_DBG2_PORT_SUBTYPE_SERIAL_DCC)) { + Status = EFI_INVALID_PARAMETER; + DEBUG (( + DEBUG_ERROR, + "ERROR: DBG2: Uart port sybtype is invalid. PortSubtype = 0x%x\n", + SerialPortInfo->PortSubtype + )); + goto error_handler; + } + + Status = AddAcpiHeader ( + CfgMgrProtocol, + This, + (EFI_ACPI_DESCRIPTION_HEADER*)&AcpiDbg2, + sizeof (DBG2_TABLE) + ); + if (EFI_ERROR (Status)) { + DEBUG (( + DEBUG_ERROR, + "ERROR: DBG2: Failed to add ACPI header. Status = %r\n", + Status + )); + goto error_handler; + } + + // Update the base address + AcpiDbg2.Dbg2DeviceInfo[DBG_PORT_INDEX_PORT1].BaseAddressRegister.Address = + SerialPortInfo->BaseAddress; + + // Update the serial port subtype + AcpiDbg2.Dbg2DeviceInfo[DBG_PORT_INDEX_PORT1].Dbg2Device.PortSubtype = + SerialPortInfo->PortSubtype; + + // Initialize the serial port + Status = SetupDebugUart (SerialPortInfo); + if (EFI_ERROR (Status)) { + DEBUG (( + DEBUG_ERROR, + "ERROR: DBG2: Failed to configure debug serial port. Status = %r\n", + Status + )); + goto error_handler; + } + + *Table = (EFI_ACPI_DESCRIPTION_HEADER*)&AcpiDbg2; + +error_handler: + return Status; +} + +/** This macro defines the DBG2 Table Generator revision. +*/ +#define DBG2_GENERATOR_REVISION CREATE_REVISION (1, 0) + +/** The interface for the DBG2 Table Generator. +*/ +STATIC +CONST +ACPI_TABLE_GENERATOR Dbg2Generator = { + // Generator ID + CREATE_STD_ACPI_TABLE_GEN_ID (ESTD_ACPI_TABLE_ID_DBG2), + // Generator Description + L"ACPI.STD.DBG2.GENERATOR", + // ACPI Table Signature + EFI_ACPI_6_2_DEBUG_PORT_2_TABLE_SIGNATURE, + // ACPI Table Revision + EFI_ACPI_DBG2_DEBUG_DEVICE_INFORMATION_STRUCT_REVISION, + // Creator ID + TABLE_GENERATOR_CREATOR_ID_ARM, + // Creator Revision + DBG2_GENERATOR_REVISION, + // Build Table function + BuildDbg2Table, + // No additional resources are allocated by the generator. + // Hence the Free Resource function is not required. + NULL +}; + +/** Register the Generator with the ACPI Table Factory. + + @param [in] ImageHandle The handle to the image. + @param [in] SystemTable Pointer to the System Table. + + @retval EFI_SUCCESS The Generator is registered. + @retval EFI_INVALID_PARAMETER A parameter is invalid. + @retval EFI_ALREADY_STARTED The Generator for the Table ID + is already registered. +**/ +EFI_STATUS +EFIAPI +AcpiDbg2LibConstructor ( + IN CONST EFI_HANDLE ImageHandle, + IN EFI_SYSTEM_TABLE * CONST SystemTable + ) +{ + EFI_STATUS Status; + Status = RegisterAcpiTableGenerator (&Dbg2Generator); + DEBUG ((DEBUG_INFO, "DBG2: Register Generator. Status = %r\n", Status)); + ASSERT_EFI_ERROR (Status); + + return Status; +} + +/** Deregister the Generator from the ACPI Table Factory. + + @param [in] ImageHandle The handle to the image. + @param [in] SystemTable Pointer to the System Table. + + @retval EFI_SUCCESS The Generator is deregistered. + @retval EFI_INVALID_PARAMETER A parameter is invalid. + @retval EFI_NOT_FOUND The Generator is not registered. +**/ +EFI_STATUS +EFIAPI +AcpiDbg2LibDestructor ( + IN CONST EFI_HANDLE ImageHandle, + IN EFI_SYSTEM_TABLE * CONST SystemTable + ) +{ + EFI_STATUS Status; + Status = DeregisterAcpiTableGenerator (&Dbg2Generator); + DEBUG ((DEBUG_INFO, "DBG2: Deregister Generator. Status = %r\n", Status)); + ASSERT_EFI_ERROR (Status); + return Status; +} -- 'Guid(CE165669-3EF3-493F-B85D-6190EE5B9759)'